Casio UT311WN Projector Network Connection Guide PDF

1 of 9
1 of 9

Summary of Content for Casio UT311WN Projector Network Connection Guide PDF

1

Network Connection Guide Be sure to keep all user documentation handy for future reference. To obtain the latest version of this manual visit the website at the URL below.

http://world.casio.com/manual/projector/

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other countries.

Other company and product names may be registered product names or trademarks of their respective owners.

The contents of this Users Guide are subject to change without notice. Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the same as the screens actually produced by the product.

EN

MA1703-A

2

Network Connection is an application you can use to establish a LAN connection between a projector and a computer, and to send display images, movies, and audio from a connected computer to the projector.

Important! The explanations in this section assume there is already a LAN connection between the

projector and computer, and that the computer screen contents are being projected. Before performing the procedures in this section, you should use the procedure under Projecting Computer Screen Contents Over a LAN Connection (see the separate Network Function Guide) to establish a LAN connection between the projector and computer.

The Network Connection window shown below is displayed while there is a LAN connection between the projector and computer.

Note The Network Connection window, display screens, and notation used in this manual are all

based on Windows. These all may be somewhat different when running on Mac OS.

Network Connection Window

Project video stream button

Login code

Function menu button

Minimize button

Close button

Projection indicator

Stop button

Pause button

Project PC screen button

Project 1 screen button

Project 4 screens button

3

While there is a LAN connection between the projector and a computer, you can use the buttons on the Network Connection window to perform the operations described below.

Network Connection Operations

Network Connection Button Operations

To do this: Click this button:

Project a single computer screen that fills the entire projection screen images (project 1 screen)

(project 1 screen)

Divide the projection screen into four parts and project four computer screens (project 4 screens)

One of the following buttons*1: , , ,

Freeze/unfreeze the computer screen that is currently being projected

(pause)

Project a movie without displaying it on the computer (project video stream)

(project video stream) For more information, see Projecting a Video Stream on page 6.

Stop computer screen projection (stop)

Exit Network Connection (close)

*1 Clicking a button will project the computer screen image in the corresponding location: (1) Upper left, (2) Upper right, (3) Lower left, (4) Lower right.

3 4

1 2

4

While there is a LAN connection between the projector and a computer, you can use the items on the Network Connection function menu (which appears when you click the function menu button) to perform the operations described below.

Network Connection Function Menu Operations

To do this: Select this function menu item: Refer to:

Prioritize display speed over projection screen image quality*1

[Projection Setting] 3

[High-speed]

Prioritize projection screen image quality over display speed*1

[Projection Setting] 3

[High-resolution]

Output computer audio from the projector speaker

[Audio Out] Outputting Computer Audio from the Projector Speaker (page 5)

Switch from main screen projection to extended screen projection*2

[Select the Projection Screen] 3

[Extended Screen]

Switch from extended screen projection to main screen projection*2

[Select the Projection Screen] 3

[Main Screen]

Use a smart device for remote control of a computer that is running Network Connection

[PC Remote] Remotely Controlling a Computer from a Smart Device (page 7)

Configure projector network settings [Admin Screen]

Using the Projector Admin Pages (See the separate Network Function Guide.)

Remotely control the projector over a LAN connection

[Admin Screen]

Remotely controlling the Projector Over a LAN Connection (See the separate Network Function Guide.)

Change the wireless LAN connection to another projector [Server Search]

To terminate the current wireless LAN connection and re-connect (page 8)

Create a copy of Network Connection on a USB flash drive*1 [Token Wizard]

Using the Token Wizard (Windows only) (page 9)

Have your computer automatically connect to an access point whenever Network Connection is started up*3

[Auto WiFi Connect]

Delete connection information (passphrase) stored by Network Connection*1

[Initialize] To delete connection information (passphrase) stored by Network Connection (page 8)

Show the IP address and login code of the projector connected via LAN

[Info]

Display Network Connection version information

[About]

Exit Network Connection [Exit]

*1 Not supported when running on Mac OS. *2 With Windows 8/8.1/10 and Mac OS, installation of driver software is required to enable these

functions. See Add-on Driver Software (page 5). *3 Not supported when running on Windows.

5

You can use Network Connection to output computer audio from the projector speaker while a computer screen is being projected over a LAN connection. To output computer audio from the projector speaker, select [Audio Out] on the Network

Connection function menu so there is check mark next to it. Enabling projector speaker output will mute the audio output from the computer speaker(s).

To disable projector speaker audio output and re-enable output from the computer speaker(s), select [Audio Out] on the function menu again to remove the check mark.

Note The function menu [Audio Out] item is unchecked (disabled) whenever you start up Network

Connection.

Use of some parts of the Network Connection requires installation of the driver software shown in the table below. For information about how to obtain this software, go to the CASIO website (http://world.casio.com/download/projector/).

Outputting Computer Audio from the Projector Speaker

Add-on Driver Software

To use this function: Install this driver software:

Extended screen output function VDD driver (for Windows 8/8.1/10) Syphon-Virtual-Screen*1 (for Mac OS)

Audio output function Sound Flower*1 (for Mac OS)

*1 When installing Network Connection on a Mac OS, a dialog box will appear asking whether or not you want to install Syphon-Virtual-Screen and Sound Flower. Be sure to select [Yes] if you plan to use extended screen output and audio output. Extended screen output and audio output will not be possible if you select [Skip].

6

You can use Network Connection to play a movie and output the playback image to the projector for projection. Only the movies video stream is displayed on the projection screen. You can leave the normal desktop and Network Connection window (which are not projected) on the computer screen.

Supported Playback Files AVI: 20 Mbps maximum 720/30P (MJPEG video, ADPCM audio) MOV: 20 Mbps maximum 1080/30P (H.264 video, ADPCM audio or AAC audio) MP4: 20 Mbps maximum 1080/30P (H.264 video, AAC audio)

To project a video stream

1. On the Network Connection window, click (project video stream). This will cause the appearance of the Network Connection window to change as shown

below.

2. Click (select file).

3. Use the select file dialog box that appears to select the movie file you want to play and then click [Open]. This starts playback of the file you selected and displays a full-screen view of the movie on the

projection screen.

4. To stop movie playback, click (stop).

5. To return to normal computer screen projection, click (project PC screen).

Note After stopping playback in step 4 of the above procedure, you can restart playback from the

beginning of the file (movie) by clicking (play). Video stream projection is always performed in full-screen view. In this case, the projection

screen cannot be divided into four parts as when projecting computer screen images. When projecting a video stream the audio of the movie is always output by the projector.

Projecting a Video Stream

Project PC screen button

Stop button

Play button

Select file button

7

This section explains how to use a smart device for remote control of a computer running Network Connection.

Important! To perform remote control operation described here, your smart device will need to have

C-Assist installed on it (see the separate Network Function Guide).

To start PC remote

1. Perform the procedure under Establishing a Direct Wireless LAN Connection between the Projector and a Computer in the separate Network Function Guide.

2. On the smart device, start up C-Assist and then perform the steps below. (1) Log in to the projector. (2) Enter PC Remote standby.

3. On the Network Connection window, click and then click [PC Remote] on the menu that appears so there is a check mark next to it. This will cause an image of the computer screen to appear on the smart devices touch

screen. The above indicates that you can use the smart devices touch screen to perform computer

mouse operations. You can also use the smart devices on-screen keyboard to input and edit data on the computer.

4. Control the computer from the smart device as required.

To exit PC Remote On the Network Connection window, click and then click [PC Remote] on the menu that appears to clear the check mark next to it.

Remotely Controlling a Computer from a Smart Device

8

To terminate the current wireless LAN connection and re-connect

1. On the Network Connection function menu, select [Server Search]. This terminates the current wireless LAN connection, and changes the projection screen to the

LAN connection standby screen.

2. Perform the procedure under Establishing a Direct Wireless LAN Connection between the Projector and a Computer in the separate Network Function Guide.

To delete connection information (passphrase) stored by Network Connection

1. On the Network Connection function menu, select [Initialize].

2. On the initialize confirmation dialog box that appears, click [OK] to initialize or [Cancel] to cancel.

3. Restart the Network Connection.

Note After you perform the above operation, the wireless LAN connection between the projector

and computer will be terminated. To re-establish a wireless LAN connection, perform the operation under Establishing a Direct Wireless LAN Connection between the Projector and a Computer in the separate Network Function Guide.

Other Network Connection Operations

9

You can use the Network Connection token wizard to copy Network Connection to a USB flash drive. After you do that, you can run Network Connection on a computer that does not have the program installed simply by plugging the USB flash drive (called a USB Token) into the computers USB port. Using USB tokens is recommended when connecting to the projector from multiple computers.

To install Network Connection on a USB flash drive

Important! Using the procedure below to install Network Connection on a USB flash drive creates a file

named autorun.inf (which is a Network Connection auto run file) in the USB flash drive root directory. If the USB flash drive root directory already contains a file with the same name, the existing file will be renamed by adding .bak or a three-digit number (.001, .002, etc.) to the end of its file name.

Using the following procedure to install Network Connection on a USB flash drive will change the name of the USB flash drive to USB Token and also change its icon to .

1. On the Network Connection window, click and then click [Token Wizard] on the menu that appears. This displays the token wizard.

2. Click [Next >]. This displays a USB drive selection screen. If there is no USB flash drive connected to the computer, the message USB memory could

not be detected. will appear. If this happens, connect the USB flash drive and wait until its USB flash drive name appears in the USB Drive box.

3. If there are multiple USB flash drives connected to the computer, click the [] button to the right of the USB Drive box and select the name of the drive where you want to install Network Connection.

4. Click the [Next >] button. This installs Network Connection on the specified USB flash drive. The message Wizard

ended normally. appears on the display after installation is complete.

Manualsnet FAQs

If you want to find out how the UT311WN Casio works, you can view and download the Casio UT311WN Projector Network Connection Guide on the Manualsnet website.

Yes, we have the Network Connection Guide for Casio UT311WN as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Network Connection Guide should include all the details that are needed to use a Casio UT311WN. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio UT311WN Projector Network Connection Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio UT311WN Projector Network Connection Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio UT311WN Projector Network Connection Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio UT311WN Projector Network Connection Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio UT311WN Projector Network Connection Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.