Casio Celviano AP45 Keyboard User's Guide PDF

1 of 53
1 of 53

Summary of Content for Casio Celviano AP45 Keyboard User's Guide PDF

USERS GUIDE GUA DEL USUARIO

AP45ES1C

ES

430A-E-001B

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS. When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate the apparatus in a way that secures easy access to the power cord.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER -SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CASIO Europe GmbH Bornbarch 10, 22848 Norderstedt, Germany

This mark applies to the AP-45V only. Please keep all information for future reference.

This mark applies in EU countries only.

430A-E-003A

E-2 430A-E-004A

Safety Precautions

Congratulations on your selection of the CASIO Digital Piano. This digital piano is a sophisticated musical instrument that blends the very best of traditional piano feel and sound quality with the latest that modern electronics technology has to offer. Before using the instrument, be sure to carefully

read through the instructions contained in this manual.

Please keep all information for future reference.

Symbols Various symbols are used in this users guide and on the product itself to ensure that the product is used safely and correctly, and to prevent injury to the user and other persons as well as damage to property. Those symbols along with their meanings are shown below.

WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.

CAUTION This indication stipulates matters that have the risk of causing injury as well as matters for which there is the likelihood of occurrence of physical damage only if the product is operated incorrectly while ignoring this indication.

Symbol Examples This triangle symbol ( ) means that the user should be careful. (The example at left indicates electric shock caution.)

This circle with a line through it ( ) means that the indicated action must not be performed. Indications within or nearby this symbol are specifically prohibited. (The example at left indicates that disassembly is prohibited.)

The black dot ( ) means that the indicated action must be performed. Indications within this symbol are actions that are specifically instructed to be performed. (The example at left indicates that the power plug must be unplugged from the electric socket.)

E-3

WARNING

Power Cord Improper use of the power cord can

create the risk of fire and electric shock. Always be sure to observe the following precautions. Use only the power cord specified for

this digital piano. Make sure that the power source you

are using matches the rating marked on the instrument itself.

Do not use an extension cord to plug multiple devices into the same power outlet.

Improper use of the power cord can create the risk of personal injury, material damage, fire and electric shock. Always be sure to observe the following precautions. Do not place heavy objects on the

power cord or subject it to heat. Never try to modify the power cord or

subject it to excessive bending. Never twist or pull on the power cord. Should the power cord or plug become

damaged, contact your original retailer or an authorized CASIO service provider.

Do not touch the plug with wet hands when it is plugged in. This may cause electric shock.

Never allow the digital piano to get wet. Water creates the risk of fire and electric shock.

Never place a vase or any other liquid container on the digital piano. Water creates the risk of fire and electric shock.

Do not locate the digital piano on an unstable surface. Never locate the digital piano on a surface that is wobbly, tilted, or otherwise unstable*. An unstable surface can cause the digital piano to fall over, creating the risk of personal injury.

* Avoid areas where there are multiple layers of carpeting, and where cables are running under the digital piano.

Always make sure you secure the digital piano to the stand with the screws that are provided. An unsecured the digital piano can fall from the stand, creating the risk of personal injury.

Never climb onto the digital piano or stand. Never climb onto the digital piano or hang from its edges. Doing so can cause the digital piano to fall over, creating the risk of personal injury. Special care concerning this point is required in households where there are small children.

Never dispose of the digital piano by burning it. Never dispose of the digital piano by burning it. Doing so creates the risk of fire and personal injury due to explosion.

Do not place containers containing water or other liquids on the instrument. Do not place the following objects on the instrument. Placing such objects on the instrument may cause fire or electric shock if they spill and get inside the instrument. Containers filled with water or other

liquids (including vases, potted plants, cups, cosmetics and medicines)

Small metal objects (including hairpins, sewing needles and coins)

Flammable objects Naked flame sources, such as lighted

candles

In the event a foreign object should happen to get inside the instrument, please take the following actions: 1. Turn off power. 2. Unplug the power cord from the wall

outlet. 3. Consult with the dealer where you

purchased the instrument or with an authorized CASIO service provider.

Do not expose this digital piano to rain or moisture. To reduce the risk of fire or electric shock, do not expose this digital piano to rain or moisture.

Never try to take the digital piano apart or modify it. Never try to take the digital piano apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, or other personal injury. Leave all internal inspection, adjustment, and repair up to your original retailer or an authorized CASIO service provider.

430A-E-005A

Safety Precautions

E-4

Safety Precautions

430A-E-006A

Precautions concerning smoke, abnormal odor, and other abnormalities Continued use of the digital piano while it is emitting smoke or abnormal odor, or while it is displaying other abnormalities creates the risk of fire and electric shock. Immediately perform the following steps whenever you notice any abnormality. 1. Turn off the digital piano power. 2. Unplug the digital piano from its power

outlet. 3. Contact your original retailer or an

authorized CASIO service provider.

Avoid dropping the digital piano and other strong impact. Continued use of the digital piano after it has been damaged by dropping or by other external impact creates the risk of fire and electric shock. Immediately perform the following steps whenever the digital piano is damaged by impact. 1. Turn off the digital piano power. 2. Unplug the digital piano from its power

outlet. 3. Contact your original retailer or an

authorized CASIO service provider.

Do not put plastic bags over your head or in your mouth. Never allow the plastic bags that the digital piano and its accessories come in to be placed over the head or swallowed. Doing so creates the risk of suffocation. Special care concerning this point is required in households where there are small children.

Opening and closing the keyboard cover Make sure that the keyboard cover is completely opened as far as it will go. When closing the keyboard cover, hold the front of the cover and close it slowly. Pinching your fingers between the digital piano and keyboard cover creates the risk of personal injury.

CAUTION

Power Outlet To power the digital piano, use a power outlet that allows easy access when plugging in or unplugging the power cord.

Power Cord Improper use of the power cord can create the risk of fire and electric shock. Always be sure to observe the following precautions. Never locate the power cord near a stove

or other source of heat. When unplugging from an outlet, never

pull on the cord. (Always grasp the plug when pulling.)

After use turn off the power switch of the instrument and unplug the power cord from the electrical outlet.

Power Plug Improper use of the power plug can create the risk of fire and electric shock. Always be sure to observe the following precautions. Push the plug fully into the power outlet

as far as it will go. Unplug from the power outlet during

lightening storms, and when you do not plan to use the digital piano for a long time (such as before a long trip).

After unplugging from the wall outlet, clean the area between the prongs of the plug to keep dust from building up.

Moving the digital piano Be sure to perform the following steps before moving the digital piano. Failure to do so can damage the power cord, creating the risk of fire and electric shock. 1. Unplug the digital piano from its power

outlet. 2. Unplug the pedal connecting cord, and

all cords and other items connected to the back of the digital piano.

Cleaning Before cleaning the digital piano, unplug it from the power outlet. Failure to do so can damage the power cord, creating the risk of fire and electric shock. It can also cause the digital piano to fall over, creating the risk of personal injury.

E-5

Never climb onto the digital piano or stand. Doing so can cause the digital piano to fall over, creating the risk of personal injury. Special care concerning this item is required in households where there are small children.

Connector Connect only the specified devices to the digital piano's connectors. Connecting non- specified items creates the risk of fire and electric shock.

Location Avoid locating the digital piano in the following types of areas. Subjecting the digital piano to the conditions described below creates the risk of fire and electric shock. Areas expose to high humidity or large

amounts of dust Near food preparation areas and other

areas where it is exposed to oil smoke Near a heater, on a heated carpet, in

direct sunlight, inside a closed automobile parked in the sun, and any other area subjected to very high temperature

Never place the digital piano directly onto furniture or other item that has a finished surface. The rubber feet on the bottom of the digital piano can react with the paint or other coatings, resulting in soiling of or damage to the finished surface. Be sure to lay felt or some other material on the finished surface before placing the digital piano on it.

Do not place heavy objects on the digital piano. Never place heavy objects on top of the digital piano. Doing so can cause the stand to tip over and the object to fall, creating the risk of personal injury.

Volume setting Do not play at very loud volumes for a long time. This precaution is especially important when using the headphones. Long-term exposure to very loud sound can damage your hearing.

Safety Precautions

430A-E-007A

Assemble the stand properly. Failure to do so can cause the stand to fall over and the digital piano to fall from the stand, creating the risk of personal injury. Make sure your assemble the stand in accordance with the instructions that come with it, and ensure that all connections are secure. Also make sure that you choose an appropriate location for the stand. When placing the digital piano onto the

stand, take care that you do not pinch your fingers between the digital piano and the stand.

At least two people should lift the digital piano when placing it onto the stand or moving it. Trying to move the digital piano alone can cause the stand to fall over, creating the risk of personal injury.

Do not drag the stand or tilt it forward or back when placing the digital piano onto the stand or moving it. Doing so can cause the digital piano to fall over, creating the risk of personal injury.

Periodically check the screws that secure the digital piano to the stand for looseness. If a screw is loose, retighten it. Loose screws can cause the stand to tip over and the digital piano to fall, creating the risk of personal injury.

E-6

16 versatile tones 16 instrument tones including piano and pipe organ provide plenty of performance versatility. An easy setting lets you control the brilliance of each tone, and a layer feature lets you assign two tones to sound simultaneously. Other features include digital effects that control the acoustical characteristic of tones, as well as three pedal effects for all the nuances of an acoustic piano.

Metronome A simple operation lets you set the tempo and the beat of the metronome to suit the tune you want to play. Its the perfect practice tool for players of all levels.

16 demo tunes 16 demo tunes demonstrate how to use each of the built-in tones.

Song Memory Two independent memory areas let you separately record and playback tunes. You can record in one memory and later record in the other memory while playing back your original recording, or even play back from both memories at the same time.

Music Library Playback with any one of 50 built-in Music Library tunes. Right hand and left hand parts are separate, so you can turn off play of either hand and practice along on the keyboard (Part Lesson).

Variable temperament, Baroque pitch Select from a variety of temperament settings and Baroque pitch for realistic play of classical pieces.

Powerful keyboard setting functions A selection of powerful keyboard setting functions helps you get create exactly the musical mood you want. Transpose adjusts the key of the keyboard in semitone steps. Tuning provides a means to tune with another musical instrument. Touch Select adjusts the intensity of the output sound in accordance with the amount of pressure you apply to the keyboard.

MIDI terminal Connecting to another MIDI musical instrument lets you play two instruments from the keyboard of this digital piano. You can also connect to a commercially available MIDI sequencer to increase the number of parts you can play.

Main Features

430A-E-008A

E-7430A-E-009A

Contents

Safety Precautions ................ E-2

Main Features ........................ E-6

General Guide........................ E-8

Connecting to a Power Outlet .................................... E-10

To connect to a power outlet .................. E-10

Connections ........................ E-11 Accessories and Options ....................... E-11

Basic Operation................... E-12 Using Tones ........................................... E-12

Using Digital Effects ............................... E-17

Using the Pedals .................................... E-18

Using the Metronome ............................. E-19

Using the Song Memory ..... E-21 About the Song Memory ..........................E-21

Recording .................................................E-22

Playback ..................................................E-23

Deleting Song Memory Contents .............E-23

Using Demo Tunes.............. E-24 Playing the Demo Tunes in Sequence ... E-24

Playing a Specific Demo Tune ............... E-24

Stopping Demo Tune Play ..................... E-24

Using Music Library ............ E-25 Playing Back Music Library Tunes ......... E-25

Practicing Individual Parts (Part Lesson) ... E-26

Keyboard Settings .............. E-28 Using Touch Select ................................ E-28

Using Transpose .................................... E-28

Adjusting the Tuning of the Digital Piano ...E-29

Temperament ......................................... E-29

Using Baroque Pitch .............................. E-31

MIDI....................................... E-32 What is MIDI? ........................................ E-32

MIDI Connections .................................. E-32

Simultaneous Receive Over Multiple Channels (Multi-Timbre) ........... E-32

Specifying the Keyboard Channel .......... E-32

Sending Song Memory Playback Data .. E-33

Turning Local Control On and Off .......... E-33

MIDI Data Notes .................................... E-33

Troubleshooting .................. E-35

Assembly Instructions........ E-36 Attachment of the Score Stand .............. E-38

Specifications ...................... E-39

Operational Precautions..... E-40

Appendix ................................ A-1 Initial Power On Settings .......................... A-1

Music Library Tunes ................................. A-3

MIDI Data Format ................... A-4 Channel Messages .................................. A-4

System Messages .................................... A-8

MIDI Implementation Chart

E-8

General Guide

430A-E-010A

G H

I

K

J*

1

F

2 3 4 7 85 6 9 0 A B C D E

Front

Bottom

* With the AP-45, the power cord is hard-wired to the bottom of the instrument.

E-9430A-E-011A

CAUTION Make sure that the cover of the digital piano is fully open whenever you are playing on the keyboard. A partially open cover can suddenly close unexpectedly and pinch your fingers.

1 POWER button

2 VOLUME slider

3 BRILLIANCE slider

4 SETTING button

5 REVERB button

6 CHORUS button

7 Tone buttons

8 SPLIT button

9 SONG MEMORY button

0 RECORD button

A TRACK A/PART L button

B TRACK B/PART R button

C PLAY/STOP button

D MUSIC LIBRARY button

E METRONOME button

F Power Indicator

G LINE OUT jacks (R, L/MONO )

H MIDI IN terminal, MIDI OUT terminal

I Headphone jacks

J AC Power jack

K Pedal Connector

General Guide

NOTE

C D E F G A B (H)

C C1

C2

C3

C4

C5

C6

C7

C8

Note Names A value next to a note name indicates the relative position of the note on the keyboard as shown below.

E-10

Connecting to a Power Outlet

You can power this digital piano by plugging it into a standard household power outlet. Be sure you turn off power whenever the digital piano is not in use.

To connect to a power outlet

1 Check to make sure that the digital pianos POWER button is in the OFF position. If it is ON, press the POWER button to turn it OFF.

POWER button

2 Attach the power cord that comes with the digital piano to the bottom of the digital piano.*

3 Plug the digital pianos power cord into a wall outlet.

* applies to the AP-45V.

430A-E-012A

IMPORTANT! Power should also be turned off before you unplug the

digital piano from the wall outlet. The shapes of the digital pianos power cord and wall

outlet should be different according to countries or regions. The illustrations are examples.

With the AP-45, the power cord is hardwired to the bottom of the instrument.

Make sure the power indicator is completely turned off before unplugging the power cord from the power outlet. Be sure to read and observe all of the safety precautions concerning power supply.

Front

Power Indicator

ON

OFF

Power indicator on.

Power indicator off.

E-11

IMPORTANT! Whenever connecting external equipment, first set the

VOLUME slider of the digital piano and the volume controller of the external equipment to relatively low volume settings. You can later adjust volume to the level you want after connections are complete.

Be sure also to refer to the documentation that comes with the external equipment for its proper connection procedures.

Connecting Headphones 1 Connect commercially available headphones to the digital pianos headphones jack. This cuts off the built-in speakers, which means you can practice even late at night without disturbing others. To protect your hearing, make sure that you do not set the volume level too high when using headphones.

Connecting to Audio Equipment 2 Use commercially available cables to connect the external audio equipment to the digital piano's LINE OUT jacks as shown in Figure 2. R jack output is right channel sound, while L/MONO jack output is left channel sound. It is up to you to purchase connecting cables like the ones shown in the illustration for connection of audio equipment. Normally in this configuration you must set the audio equipment's input selector to the setting that specifies the terminal (such as AUX IN) to which the digital piano is connected. Use the digital piano's VOLUME slider to adjust the volume level.

Connecting to a Musical Instrument Amplifier 3

Use commercially available cables to connect the amplifier to the digital piano's LINE OUT jacks as shown in Figure 3. R jack output is right channel sound, while L/MONO jack output is left channel sound. Connecting to the L/MONO jack only outputs a mixture of both channels. It is up to you to purchase connecting cable like the one shown in the illustration for connection of the amplifier. Use the digital piano's VOLUME slider to adjust the volume level.

Accessories and Options Use only the accessories and options specified for this digital piano. Use of non-authorized items creates the danger of fire, electric shock, and personal injury.

430A-E-013A

Connecting to an audio or musical instrument amplifier provides even clearer, more powerful sound through external speakers.

Standard plug

Standard jacks

Headphones

Bottom Audio amplifier AUX IN, etc.

PIN plugs

LEFT (White)

RIGHT (Red)

INPUT 1

INPUT 2

Guitar amplifier, keyboard amplifier, etc.

Connections

E-12

Variation Button Each tone button is assigned two tones: a normal tone (whose name is above the tone button) and a variation tone (whose name is below the tone button). Which tone is selected when you press a tone button depends on the current status of the indicator lamp above the VARIATION button, as shown below.

Press the VARIATION button to toggle its indicator lamp on and off.

Pressing the tone button of the currently selected tone toggles it between the normal tone and the variation tone.

NOTE The tone buttons provide you with a selection of 16 tones

that you can assign to and play on the keyboard. The GRAND PIANO 1 tone was recorded with stereo

sampling. See Selecting a Variation Tone for information on

selecting the tones whose names are marked below each tone button.

To select a tone

1 Press the POWER button to turn on the digital piano power.

2 Press one of the tone buttons to select the tone you want.

3 Use the VOLUME slider to adjust the volume. It is a good idea to set the volume to a relatively low

level at first. Moving the slider towards MIN decreases volume,

while moving it towards MAX increases volume.

4 Play something on the keyboard. Adjust volume to the level you want as you play.

5 After you are finished playing, press the POWER button to turn off power.

NOTE The GRAND PIANO 1 tone is selected automatically

whenever you turn on the digital piano power.

Selecting a Variation Tone The tone buttons that are marked as shown below are for selecting variation tones.

1 Press the tone button for the tone you want to select.

2 Press the VARIATION button. This causes the indicator lamp above the button to

light, which indicates that the variation tone is selected.

3 To switch back from variation tone to normal tone, press the VARIATION button again to the indicator lamp goes out.

430A-E-014A

BRIGHT PIANO

HONKY- TONK

GRAND PIANO 2

ELEC PIANO 2

VIBRAPHONE

HARPSI- CHORD

PIPE ORGAN 2

STRINGS 2

STRINGS 1

SYNTH-PAD

GRAND PIANO 1

ELEC PIANO 1

PIPE ORGAN 1

VARIATION buttonCHOIR

RIDE ACO BASS

ACOUSTIC BASS

Variation Tones

Tone Buttons

Using Tones The following procedures describe everything you need to know about selecting and using tones.

Selecting a Tone This digital piano has a selection of 16 built-in tones.

To select this type of tone: The VARIATION button lamp should be:

Normal tone Off

Variation tone On

Basic Operation

E-13

Basic Operation

430A-E-015A

To layer two tones

NOTE To use the variation tone for the main tone and/or the

layer tone, perform the required operation to turn on the variation tone(s) before starting the procedure below.

1 While holding down the tone button of the main tone, press the tone button for the layer tone. This causes the indicator lamp of the main tone button

to light, and the lamp of the layer tone button to flash. Whether the normal tone or variation tone is selected

for the main tone and layer tone depends on the normal tone/variation tone setting of the tone button you press. The indicator lamp above the VARIATION button is lit when the variation tone is selected for the main tone.

2 Now try playing something on the keyboard. Note should sound using both of the tones you

selected.

3 To cancel layering, press any tone button.

NOTE If you change or turn off a digital effect while layering is

turned on, the setting you make is saved to the main tones settings only.

You cannot layer two tones that are assigned to the same tone button (for example: ELEC PIANO 1 + ELEC PIANO 2, or HARPSICHORD + VIBRAPHONE).

Using Layer With layer you can assign two different tones (a main tone and a layered tone) to the keyboard, both of which play whenever you press a key.

Main tone + Layered tone

How digital effects are applied when layering is turned on The following are the rules that determine what type of digital effects are applied to two tones that are layered.

These conditions:

Digital effects turned on for the main tone

Digital effects turned on or off for the layered tone

Digital effects turned off for the main tone

Digital effects turned on for the layered tone

Digital effects turned off for the main tone

Digital effects turned off for the layered tone

Cause these digital effects to be applied to both the main tone and layered tone:

Main tone digital effects

Layered tone digital effects

None

E-14

Basic Operation

430A-E-016A

To adjust the volume of the main tone

1 Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure.

2 Press the GRAND PIANO 1 button. This causes the indicator lamp above the button to

flash.

3 Use one of the procedures below to set the main tone volume to a value in the range of 40 to 127. To scroll the volume setting value: While holding

down the SETTING button, use the + (increase) and (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed. Pressing + and at the same time automatically selects a volume setting value of 127.

To input the volume setting value: While holding down the SETTING button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the SETTING button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.

A note does not sound when you press a keyboard key at this time.

4 Release the SETTING button to complete the procedure.

NOTE The setting you make for the main tone volume remains

in effect even if you change to another tone.

+/ keys

Number Input keys

C3B2

To adjust the volume of the layer tone

1 Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure.

2 Press the GRAND PIANO 2 button. This causes the indicator lamp above the button to

flash.

3 Use one of the procedures below to set the layer tone volume to a value in the range of 40 to 127. To scroll the volume setting value: While holding

down the SETTING button, use the + (increase) and (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed. Pressing + and at the same time automatically selects a volume setting value of 72.

To input the volume setting value: While holding down the SETTING button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the SETTING button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.

A note does not sound when you press a keyboard key at this time.

4 Release the SETTING button to complete the procedure.

NOTE The setting you make for the layer tone volume remains

in effect even if you change to another tone.

+/ keys

Number Input keys

C3B2

E-15

Basic Operation

Using Split With split you can assign two different tones (a main tone and a split tone) to either end of the keyboard, which lets you play one tone with your left hand and another tone with your right hand.

Split point (B3)

Split tone Main tone

To split the keyboard

1 Select the main tone.

2 Press the SPLIT button. This causes the indicator lamp above the button to

light.

3 While holding down the SPLIT button, press the tone button of the tone you want to use as the split tone. While holding down the SPLIT button, you can also

press the VARIATION button to switch to the variation of the split tone.

The tone button lamp of the split tone you specify flashes. The indicator lamp above the VARIATION button also flashes when the variation tone is selected for the split tone.

4 Now try playing something on the keyboard. The lower range (left side) of the keyboard is assigned

the split tone, while the upper range (right side) is assigned the main tone.

The location on the keyboard where the changeover between the two tones occurs is called the split point. See To change the location of the split point on this page for details on changing the location of the split point.

5 Press the SPLIT button again to unsplit the keyboard and return it to normal. This causes the indicator lamp above the button to go

out.

NOTE If you change or turn off a digital effect while split is

turned on, the setting you make is saved to the main tones settings only.

How digital effects are applied when split is turned on The following are the rules that determine what type of digital effects are applied to tones that are assigned to a split keyboard.

These conditions:

Digital effects turned on for the main tone

Digital effects turned on or off for the split tone

Digital effects turned off for the main tone

Layering turned on (page E-13)

Digital effects turned on for the layered tone

Digital effects turned off for the main tone

Layering turned on (page E-13), but digital effects turned off for the layered tone

Layering turned off Digital effects turned on

for the split tone

Cause these digital effects to be applied to both the main tone and split tone:

Main tone digital effects

Layered tone digital effects

Split tone digital effects

To change the location of the split point The split point is the point on the keyboard that separates the low range (split tone) from the high range (main tone).

1 While holding down the SPLIT button, press the keyboard key where you want the highest note (the rightmost key) of the lower range (left side range) to be. No sound is produced when the keys are pressed.

430A-E-017A

E-16 430A-E-018A

Basic Operation

To adjust the volume of the split tone

1 Hold down the SETTING button, and keep it depressed until you reach step 4 of this procedure.

2 Press the ELEC PIANO 1 button. This causes the indicator lamp above the button to

flash.

3 Use one of the procedures below to set the split tone volume to a value in the range of 40 to 127. To scroll the volume setting value: While holding

down the SETTING button, use the + (increase) and (decrease) keys to scroll the volume setting value. Holding down either key changes the setting at high speed. Pressing + and at the same time automatically selects a volume setting value of 127.

To input the volume setting value: While holding down the SETTING button, use the number input keys to input a two-digit or three-digit volume setting value in the range of 40 to 127. You can input a two digit or a three-digit value. The level you input is applied to the volume setting value when you release the SETTING button. The volume setting does not change if you input a one-digit value or a value that is outside of the allowable range.

A note does not sound when you press a keyboard key at this time.

4 Release the SETTING button to complete the procedure.

NOTE The setting you make for the split tone volume remains

in effect even if you change to another tone.

+/ keys

Number Input keys

C3B2

More about tones

Polyphony This digital piano can play up to 64 notes at the same time. Note, however, that the tones listed below are capable of only 32-note polyphony. GRAND PIANO 1, BRIGHT PIANO, HONKY-TONK, ELEC PIANO 1, HARPSICHORD, STRINGS 1, CHOIR, SYNTH-PAD, RIDE ACO BASS

Touch Response The touch response feature causes changes in the volume and the sound of the tone in accordance with how much pressure you apply to the keyboard, just like an acoustic piano. Touch response affects the HARPSICHORD tone only slightly, because the original musical instrument normally produces the same sound, no matter how much pressure is applied.

Digitally Sampled Tones The tones of this digital piano are produced using digitally recorded samples of actual musical instruments. Not all of the instruments, however, can produce tones across the entire range played by this digital piano (A0 through C8). In such a case, digital recordings are used for the range that actually can be produced by the original instrument, and synthesized tones are used for notes that cannot be produced naturally. Because of this, you may notice very slight differences between natural notes and synthesized notes in sound quality and in results produced when using effects. These differences are normal and do not indicate malfunction.

Adjusting the Brilliance of a Tone You can use the BRILLIANCE slider to adjust the clarity and sharpness of a tone to suit your music and personal preferences.

1 Slide the BRILLIANCE slider left and right to adjust the brilliance of a tone to the level that you want. Moving the slider towards MELLOW produces a more

mellow sound, while moving it toward BRIGHT produces a brighter sound.

E-17

Basic Operation

Using Digital Effects This digital piano provides you with a selection of digital effects that you can apply to tones. The following provides general descriptions of each effect, but the best way to find out how they affect tones is to experiment for yourself.

Digital Effect Types

REVERB The REVERB effect gives you a choice of the eight variations listed below. Each one simulates the acoustics of different environments.

The following table shows the name of each effect and the keyboard keys you press to select it.

Type Keyboard Key Number*

Room 1 1

Room 2 2

Room 3 3

Stage 4

Hall 1 5

Hall 2 6

Delay 7

Pan Delay 8

* Number marked above keyboard key

CHORUS The CHORUS effect adds depth and vibrato to notes.

The following are the eight chorus effects of this digital piano and the keyboard keys you press to select them.

Type Keyboard Key Number*

Chorus 1 1

Chorus 2 2

Chorus 3 3

Chorus 4 4

F-back Chorus 5

Flanger 6

ShortDelay 7

ShortDelayFB 8

* Number marked above keyboard key

Keys Used for Configuring Digital Effect Settings

Digital Effect Keys

Room 1 Chorus 1

Room 3 Chorus 3

Hall 1 F-back Chorus

Room 2 Chorus 2

Hall 2 Flanger

Pan Delay ShortDelayFB

Stage Chorus 4

Delay ShortDelay

Turning Digital Effects On and Off

To turn this digital effect on or off:

Press this button:

Reverb REVERB

Chorus CHORUS

The lamp above the corresponding button is lit when the digital effect is turned on, and unlit when the digital effect is turned off.

Selecting a Digital Effect

To select a reverb effect

1 While holding down the REVERB button, press the keyboard key that corresponds to the number of the reverb effect you want to select. A note does not sound when you press a keyboard

key at this time.

To select a chorus effect

1 While holding down the CHORUS button, press the keyboard key that corresponds to the number of the chorus effect you want to select. A note does not sound when you press a keyboard

key at this time.

430A-E-019A

E-18

Basic Operation

Power on default effect settings The table below shows the effect settings that are assigned to each tone whenever you turn on the digital piano power.

* ( ) : the initial setting of the chorus type when chorus effect is turned on.

You can change the above digital effect settings after you turn on power.

NOTE Selecting a tone automatically selects the digital effects

currently assigned to it. Changes you make to digital effect settings are assigned

to the currently selected tone only. Digital effect settings remain in effect until you turn off

the digital piano power. Demo tunes have their own digital effect settings, which

are automatically selected whenever you select a demo tune.

Using the Pedals This digital piano comes equipped with the three pedals shown in the illustration below.

Soft pedal

Sostenuto pedal Damper pedal

Pedal functions Damper pedal

Pressing this pedal causes notes to reverberate and to sustain longer. In the case of the PIPE ORGAN and STRINGS tones, pressing this pedal sustains the notes played until you release the pedal.

Soft pedal Pressing this pedal dampens notes and slightly reduces their volume. Only notes played after the pedal is depressed are affected, and any notes played before the pedal is pressed sound at their normal volume.

Sostenuto pedal Like the damper pedal, this pedal causes notes to reverberate and to sustain longer. The difference between the two pedals is the timing when they are pressed. With the sostenuto pedal, you press the pedal after depressing the notes you want to sustain. Only the notes whose keyboard keys are depressed when the sostenuto pedal is pressed are affected.

NOTE The following shows how pedal effects are applied during

different types of operations.

430A-E-020A

Tone Name

GRAND PIANO 1

BRIGHT PIANO

GRAND PIANO 2

HONKY-TONK

ELEC PIANO 1

ELEC PIANO 2

HARPSICHORD

VIBRAPHONE

PIPE ORGAN 1

PIPE ORGAN 2

STRINGS 1

STRINGS 2

CHOIR

SYNTH-PAD

ACOUSTIC BASS

RIDE ACO BASS

REVERB

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

Hall 1

CHORUS

Off (Chorus 3)*

Off (Chorus 3)*

Off (Chorus 3)*

Off (Chorus 3)*

Chorus 3

Chorus 3

Off (Chorus 3)*

Chorus 3

Chorus 3

Off (Chorus 3)*

Chorus 3

Chorus 3

Chorus 3

Chorus 3

Off (Chorus 3)*

Off (Chorus 3)*

Digital Effect Setting

While you are performing this type of operation:

Song memory recording

Song memory playback

Demo tune play

Music Library play

Pedal effects are applied to:

Notes played on the keyboard only

Under the power on default setting, pedal effects are not applied to a split tone (page E-15). Perform the procedure below to apply pedal effects to a split tone.

E-19

To apply pedal effects to a split tone

1 While holding down the SETTING button, turn pedal effects on or off by pressing one of the keyboard keys shown in the illustration below.

A0 : Pedal effects off B0 : Pedal effects on

A note does not sound when you press a keyboard key while the SETTING button is depressed.

C4

B0 : ON

A0 : OFF 1 METRONOME BEAT keys

2 METRONOME VOL keys

3TEMPO keys

4Number Input keys

5+/ keys

Using the Metronome The metronome provides a reference beat that you can use during your performances or practice sessions. You can change the beat and the tempo of the metronome.

The illustration below shows the keyboard keys you use when configuring metronome settings. The names of the settings are also marked above the keyboard keys to which they are assigned.

NOTE A note does not sound when you press any of the above

keyboard keys while holding down the SETTING button.

Basic Operation

430A-E-021A

E-20

NOTE You can change metronome beat and tempo settings at

any time, even while the metronome is sounding. You can also use the metronome in combination with

song memory play. See the section of this Users Guide covering the function for details.

Adjusting the Metronome Volume Use the following procedure to increase and decrease the volume of the metronome beat.

To adjust the metronome volume

1 While holding down the SETTING button, use the METRONOME VOL keys 2 to input 1, 2, or 3.

NOTE Metronome volume is automatically set to 2 whenever

you turn on the digital piano.

Using the Metronome

PREPARATION Check to make sure that the indicator above the

RECORD button is off. If the indicator is on, press the RECORD button to turn it off.

See the section of this Users Guide covering the song memory for details on using the metronome in combination with the function.

To use the metronome

1 Press METRONOME to start the metronome.

2 Set the beat of the metronome. While holding down the SETTING button, press the

METRONOME BEAT key 1 to select a beat setting. A note does not sound when you press a keyboard

key while holding down SETTING. The first value of the beat can be set to a value of 2

through 6. The bell that normally indicates the first beat of a measure does not sound while a value of 0 is specified. All beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying about how many beats there are in each measure.

3 Use one of the procedures below to set the tempo to a value in the range of 30 to 255 beats per minute. To scroll the tempo value: While holding down the

SETTING button, use the TEMPO + (increase) and (decrease) keys 5 to scroll the tempo value. Holding down either key changes the setting at high speed. Pressing + and at the same time automatically selects a tempo value of 120.

To input the tempo value: While holding down the SETTING button, use the number input keys 4 to input a two-digit or three-digit tempo value in the range of 30 to 255. You can input a two digit or a three- digit value. The value you input is applied to the tempo when you release the SETTING button. The tempo setting does not change if you input a one-digit value or a value that is outside of the allowable range.

4 When you want to stop the metronome, press METRONOME again. Pressing METRONOME again restarts the metronome

sound using the current beat and tempo setting. If you want to change both the tempo and the beat

before restarting the metronome, perform the above procedure here.

Basic Operation

430A-E-022A

E-21

Using the Song Memory

430A-E-023A

This section describes how to record keyboard play to memory and playback data from song memory.

About the Song Memory

Song Memory Capacity There are two song memory tracks named Track A and

Track B. The two tracks can store a combined total of approximately 8,000 notes.

Recording stops automatically and the indicator above the RECORD button goes out whenever memory becomes full.

Recorded Data The following is a list of the data that can be recorded in song memory once recording starts.

Anything you played on the keyboard (received MIDI data not recorded)

Tone settings (including layered tones, layered tone volume, split tones, split tone volume, split point) and any tone setting changes

Tempo and beat settings used during recording Pedal operations Reverb settings Chorus settings

Recorded Data Storage This digital piano has a lithium battery to supply power to retain memory contents even while power is off.* The life of the lithium battery is five years after the date of manufacture of the digital piano. Be sure to contact your CASIO service provider about having the lithium battery replaced every five years.

* Never turn off piano power while a record operation is in progress.

IMPORTANT! If the data recorded in a single track uses up all the

available Song Memory capacity, you will not be able to record anything in the other track.

Recording new data to a track automatically deletes any data previously stored in that track. A lit track indicator means that the track already contains data.

Turning off power while a record operation is in progress deletes anything recorded up to that point.

CASIO shall not be held responsible for any losses by you or any third party due to loss of data caused by malfunction or repair of this digital piano, or by battery replacement.

E-22

Recording In addition to recording notes as they are played on the keyboard, you can also record to one track while playing back from the other track. The following procedures cover each of these operations.

RECORD TRACK B SONG

MEMORY TRACK A PLAY/STOP

PART L PART R

To record notes from the keyboard

PREPARATION Select the tone and digital effects you want to start with. Make sure that the indicator above the MUSIC LIBRARY

button is not lit. If it is, press MUSIC LIBRARY to turn it off.

Use the procedure under Using the Metronome on page E-19 for configure the tempo and beat settings you want to use during recording.

1 Press the SONG MEMORY button. This causes the indicator lamp above the button to

light. If a track is already recorded, the indicator above its

track button lights at this time. If you want to use the metronome during recording,

press the METRONOME button to start the metronome.

2 Press RECORD to put the digital piano into record standby. The indicator above RECORD flashes. If both tracks are empty (unrecorded), Track A is

selected first for recording, which is indicated by the lamp above its button flashing. If only one of the tracks is empty, that track is selected first for recording.

If both tracks are already selected, the track recorded last is selected first. If both tracks are recorded and you have turned off power since recording, Track A is selected first.

You can also change the metronomes beat setting at this time.

3 Press either of the TRACK buttons to select Track A or Track B. The indicator above the button you press flashes to

indicate that the track is selected for recording. If the data recorded in a single track uses up all the

available Song Memory capacity, you will not be able to record anything in the other track.

4 Play something on the keyboard to start recording. What you play sounds from the speakers and is

recorded into memory. You can also start recording by pressing PLAY/STOP.

In this case, blank space is inserted in memory from the point that you press PLAY/STOP up to the point you start to play on the keyboard.

The indicator lamp above the RECORD button changes from flashing to lit when recording starts.

5 After you are finished recording, press PLAY/STOP to stop the record operation. At this time the indicator above RECORD goes out,

while the indicator above the recorded track remains on.

Here you can press PLAY/STOP and playback the data you just recorded.

To exit the song memory mode, press the SONG MEMORY so its indicator lamp goes out.

To record to one track while playing back from the other track

This procedure is basically the same as that under To record notes from the keyboard on this page. The differences are as described below.

Example: To play back Track A while recording to Track B

Before starting step 2 of the procedure on this page, press the TRACK A button so the indicator above it is lit.

When you enter record standby, the indicator above the TRACK A button remains lit, while the indicator above the TRACK B button flashes. If the indicator above the TRACK A button is flashing at this time, press the TRACK B button so the indicator above it flashes.

Performing step 4 of the procedure causes Track A play back and Track B recording to start at the same time. Play on the keyboard along with the playback of Track A.

Once you enter record standby, you can also change the tempo and beat settings. It should be noted, however, that playback is performed following the last tempo and beat settings that were used for recording in either of the tracks.

Using the Song Memory

430A-E-024A

E-23

Playback Use the following procedure to play back from song memory.

To play back from song memory

1 Press the SONG MEMORY button. This causes the indicator lamp above the button to

light.

2 Press the TRACK button of the track you want to play back (A or B). This causes the indicator lamp above the button of

the track you select to light.

3 Press PLAY/STOP to start playback. You can toggle the playback metronome sound on and

off by pressing the METRONOME button. To stop the metronome, press the METRONOME

button. Playback stops automatically when the end of the tune

is reached. To stop part way through, press PLAY/STOP.

NOTE If you want to playback song memory contents you have

just recorded, simply press PLAY/STOP. You cannot change the tone when playing back from

song memory. You can change the playback tempo while playing back

from song memory.

Deleting Song Memory Contents

IMPORTANT! The delete operation cannot be undone. Make sure you

play back song memory contents and confirm that you no longer need it before performing the following procedure.

To delete song memory contents

1 Press the SONG MEMORY button. This causes the indicator lamp above the button of

the track you select to light.

2 While holding down the SONG MEMORY button, press the button of the track (A or B) that you want to delete. This deletes the contents of the track. To exit the song memory mode, press the SONG

MEMORY button.

Using the Song Memory

430A-E-025A

E-24

Using Demo Tunes

This digital piano comes with 16 built-in demo tunes, each of which features one of the built-in tones.

Playing the Demo Tunes in Sequence To play the demo tunes in sequence

1 While holding down the MUSIC LIBRARY button, press the PLAY/STOP button. All the demo tunes play in sequence, starting from

Tune 1.

Playing a Specific Demo Tune To play a specific demo tune

1 After playback starts, press the tone button that corresponds to the tune you want to play. Songs are played in sequence, in an endless loop,

starting from the currently selected song. Pressing the VARIATION button or the tone button

of the current tone during demo tune play toggles the demo tune between its normal tones tune and variation tones tune.

Stopping Demo Tune Play To stop demo tune play

1 Press the PLAY/STOP button to stop demo tune play.

NOTE You cannot change the tempo or tone, or turn on the

metronome while a demo tune is playing. Playing on the keyboard during demo tune play plays

notes using the demo tunes tone. You can adjust volume while demo playback is in

progress. The setting below are changed automatically when a

demo tune is played. These changes are temporary, and remain in effect only while the demo tune is playing. Tone Digital effect Transpose Tuning Temperament : Equal Temperament Baroque pitch : off

Pedal operations performed during demo tune play are applied to notes played on the keyboard only. They are not applied to demo tune playback.

Demo tune notes cannot be sent as MIDI data.

Demo Tune List

No. Title Composer Tone Time

1 Etude Op.10 No.12 Revolutionary F.F.Chopin GRAND PIANO 1 235

2 Jesus Bleibet Meine Freude J.S.Bach PIPE ORGAN 2 118

3 Original ELEC PIANO 1 133

4 Original STRINGS 2 111

5 Original ACOUSTIC BASS 48

6 Hungarian Dances No.5 (Duets) J.Brahms GRAND PIANO 2 224

7 Original VIBRAPHONE 110

8 Mein junges Leben hat ein End J.P.Sweelinck CHOIR 118

9 Original BRIGHT PIANO 110

10 Original SYNTH-PAD 118

11 HARMONIUS BLACKSMITH G.F.HNDEL HARPSICHORD 212

12 Original STRINGS 1 200

13 Original ELEC PIANO 2 155

14 Original RIDE ACO BASS 54

15 Fantasia (Praeludium) und Fuga in G-Moll BWV542 J.S.Bach PIPE ORGAN 1 148

16 Scott Joplins New Rag S.Joplin HONKY-TONK 104

430A-E-026C

E-25

Using Music Library

Once you select one of the 50 built-in Music Library tunes, you can cut either the left-hand or right-hand part (primo and secondo part for duet tunes) and play along on the keyboard. You can adjust the tempo to play along at the pace thats comfortable for you, and you can use the metronome to help you keep in time. See Music Library Tunes on page A-3 for full list of available Music Library tunes. Duet tunes are those marked (Duets).

TRACK BTRACK A PLAY/STOP MUSIC

LIBRARY

PART L PART R

Playing Back Music Library Tunes Use the following procedure when you want simply to play back a Music Library tune without playing along with it.

To play back a Music Library tune

1 Press the MUSIC LIBRARY button so the indicator above it is lit.

2 Turn the metronome on or off.

To turn the metronome off: Press the METRONOME button so the indicator above it is not lit. With this setting, the pre-count prior to playback does not sound and metronome does not sound either. The indicator above the METRONOME button does, however, flash in time with tempo of the tune being played.

To turn the metronome on: Press the METRONOME button so the indicator above it is lit. With this setting, a pre-count sounds before playback of the Music Library tune starts, and the metronome sounds during playback. The indicator above the METRONOME button flashes in time with tempo of the tune being played. You can also configure the metronome so only a pre- count sounds prior to playback, without the metronome sounding during actual playback. See To turn the metronome on or off during playback for more information.

3 Select the number of the tune you want to play. See Music Library Tunes on page A-3 for full list of

available Music Library tunes.

While holding down the MUSIC LIBRARY button, use keyboard keys C3 through B3 (number input keys) to input the number of the song you want to play. A note does not sound when you press a keyboard key at this time. Input either a one-digit or a two-digit number. The number you input is registered when you release the MUSIC LIBRARY button.

Selecting a Music Library song causes the indicator lamps above both part buttons (L and R) to light.

To specify playback of all Music Library songs, specify 99 for the song number. The indicator lamp above the MUSIC LIBRARY button flashes during playback of all the Music Library songs.

4 Press PLAY/STOP to start playback. If you turned on the metronome before starting this

procedure, a count sounds before actual playback starts.

The tempo changes automatically to the preset tempo for the song being played back.

Notes played on the keyboard during Music Library tune playback are sounded using the tone setting of the selected tune.

5 When you want to stop playback, press PLAY/STOP again. If you selected a single tune, playback stops

automatically when the end of the tune is reached. If you selected tune number 99, tune playback

continues until you press PLAY/STOP. To exit the Music Library mode, press the MUSIC

LIBRARY so its indicator lamp goes out.

Number Input keys

430A-E-027B

E-26

NOTE When you press the MUSIC LIBRARY button, the

number of the song that was selected the last time you used the Music Library appears first.

You can change the tempo of playback after you select a tune. You can return the tempo of a tune to its preset level by selecting the same tune again (step 2 of the above procedure).

The following operations and settings can be performed while Music Library tune playback is in progress: Volume Brilliance Tempo Touch select Tone Left-hand part/right-hand part on and off Metronome Keyboard play Pedal operations

Receipt of MIDI IN data is enabled while Song Lesson playback is in progress.

Pressing the PLAY/STOP button while in another mode besides the Music Library Mode or Song Memory Mode enters the Music Library Mode and starts playback.

C4C1 : ON B0 : OFF

To turn the metronome on or off during playback

1 While holding down the SETTING button, turn the metronome on or off by pressing one of the keyboard keys shown in the illustration below.

B0 : Off (Pre-count sounds prior to playback only, no metronome during playback)

C1 : On (Pre-count sounds prior to playback, and metronome sounds during playback)

A note does not sound when you press a keyboard key while the SETTING button is depressed.

NOTE The power on default for the above setting is metronome

on, which means that a pre-count sounds prior to playback, and the metronome sounds during playback.

Practicing Individual Parts (Part Lesson) The left-hand part (or secondo part) and right-hand part (or primo part) are recorded separately for Music Library tunes. Because of this, you can turn off either part and play along with the other part on the keyboard. The terms primo and secondo refer to the parts of duet tunes.

PREPARATION Perform steps 1 and 2 of the procedure under To play

back a Music Library tune on page E-25 to select the Music Library tune you want to practice.

Set the tempo you want to use during the part lesson. Use the same procedure that you use to set the tempo of the metronome (page E-19).

Using Music Library

430A-E-028A

E-27

To use Part Lesson

1 Press the PART L or PART R button to select the part you want to play on the keyboard. Pressing either button causes the indicator above the

other button to go out.

To practice the right-hand (or primo) part, press the PART R button.

PART R button indicator: Off PART L button indicator: On

To practice the left-hand (or secondo) part, press the PART L button.

PART R button indicator: On PART L button indicator: Off

2 Turn on the metronome, if you want. Press METRONOME so the indicator above it is lit. Leave the indicator above METRONOME off if you

do not want to use the metronome during your practice session.

3 Press PLAY/STOP to start play of the Music Library tune and play along on the keyboard. If you turned on the metronome, a count sounds for

one measure before actual playback starts.

4 When you want to stop playback, press PLAY/STOP again. Playback also stops automatically when the end of

the tune is reached.

NOTE The beat of each Music Library tune is fixed, and cannot

be changed. Recording to song memory (page E-21) cannot be

started while playback of a Music Library tune is in progress.

Pedal operations affect keyboard play only. See the notes under Playing Back Music Library Tunes

on page E-25 for details on other operations.

Using Music Library

430A-E-029A

E-28

Keyboard Settings

Using Touch Select This setting lets you adjust the touch of the keyboard to suit your own playing style. This means you can select a stronger touch for those with powerful hands, and a lighter touch for beginners and anyone else with less strength. Use the keys shown below to change the Touch Select setting.

Setting keys

OFF

LIGHT NORMAL

HEAVY

Touch Select Settings OFF .................. Off

LIGHT ............. Light This setting produces strong output, even when light pressure is applied to the keyboard.

NORMAL ....... Normal This is the standard setting.

HEAVY ............ Heavy This setting requires relatively strong keyboard pressure to produce normal output.

To change the Touch Select setting

1 While still holding down the SETTING button, select the key touch by pressing one of the keyboard keys. A note does not sound when you press a keyboard

key while holding down SETTING.

NOTE Touch select is automatically set to NORMAL whenever

you turn on the digital piano power.

Using Transpose Transpose lets you adjust the pitch of this digital piano in semitone steps. This means you can change the key of the digital piano to suit the voice of a vocalist or the key of another musical instrument, without having to learn to play a piece in another key.

Use the keys shown below to change the transpose setting.

To change the transpose setting

1 While holding down the SETTING button, select a key by pressing one of the keyboard illustrated above. The digital piano can be transposed within a range of

F to C to F. A note does not sound when you press a keyboard

key while holding down SETTING.

NOTE The transpose value is automatically set to 0 (C)

whenever you turn on the digital piano power.

Lower

Setting keys

Higher

C:Standard key

430A-E-030A

E-29

Keyboard Settings

Adjusting the Tuning of the Digital Piano You can adjust the overall tuning of the digital piano for play along with another instrument. You can adjust tuning within a range of 50 cents* from A4 = 440.0Hz.

Use the keyboard keys noted below to adjust the tuning of the digital piano.

To adjust the tuning of the digital piano

1 While holding down the SETTING button, press keyboard key E4 () to lower the tuning or F4 (+) to raise it. Each press of a key changes the tuning by about 0.8 cents* (1/128 semitone). Holding down either key changes the setting at high

speed. A note does not sound when you press a keyboard

key while holding down SETTING.

NOTE Holding down the SETTING button and pressing

keyboard keys E4 () and F4 (+) at the same time returns tuning to the standard A4 = 440.0Hz.

* 100 cents is equivalent to one semitone.

: lowers the pitch

Setting keys

+ : raises the pitch

Temperament Modern pianos employ a tuning system called Equal Temperament, which is also used by your digital piano. Equal Temperament, however, is a relatively new tuning system, and different temperaments were in use during the times of Bach, Beethoven, and Chopin. Your digital piano comes with the seven temperament settings listed below, which adjust the tuning of the keyboard to suit a variety of classical pieces.

Use the keys shown below to change the temperament setting.

B5 ..... Equal Temperament B5 ...... Kirnberger III C6 ..... Werckmeister C6 .... Mean-Tone System D6 ..... Pythagorean System E6 ..... Just Major Intonation E6 ...... Just Minor Intonation

NOTE Equal temperament and a root of C are assigned as

defaults whenever you turn on the digital piano power. See About Temperaments on page E-30 for further

details.

To change the temperament

1 Hold down the SETTING button. Note that you must keep the SETTING button depressed until step 4, below.

2 While still holding down the SETTING button, select the temperament by pressing one of the keyboard keys illustrated below.

No sound is produced when the keys are pressed.

(black key) B5 E6

F5(black key) F4

Root Setting Range Temperament Setting Range

E6B5

430A-E-031A

E-30

3 Select a root by pressing one of the keys in the range shown in the illustration below. Remember to keep the SETTING button depressed. The note for the keyboard key you press is applied as

the root. If you press key F5, for example, the root becomes F.

No sound is produced when the keys are pressed. When Baroque Pitch (page E-31) is ON, the root is a

half-note higher than the key you press. This means that to set a root of C, you should press B4.

4 Release the SETTING button to exit temperament setting.

NOTE If you select the temperament only without specifying

the root in the above procedure, the root automatically becomes C.

Temperament root settings are not affected when you change the Transpose setting.

The keys you should press to set the root in step 3 of the above procedure are fixed. They are not affected by transpose settings, etc.

F5F4

About Temperaments Equal Temperament

This tuning system is the most widely used for keyboard musical instruments in the world today. The octave is divided into 12 semitones that are equal in frequency ratio. With this system, you can perform in all the major and minor keys without any adjustment. Though we take this system for granted these days, it was a revolutionary development in the history of music. Equal Temperament tuning has been the most common system used in the world since the middle of the 18th Century.

Kirnberger III This is also one of the precursors to equal temperament. It is an evolution of just intonation and the mean-tone system, and all keys (from C-major to F-major) can be used for keyboard play.

Werckmeister Werckmeister is a famous theorist who also did research on equal temperament. This particular system is said to be a precursor to equal temperament, and all keys (from C-major to F-major) can be used for keyboard play.

Mean-Tone System This system was the first actually used for tuning of keyboard musical instruments. It was widely used starting from the Renaissance up until the second half of the 18th Century. During the days of Handel and Bach, it was employed for cembalos, organs, and pianos.

Pythagorean System This system was developed by the philosopher Pythagoras sometime during the 5th Century B.C. Most of the fifths in this system do not deviate from the pure (acoustically correct) intervals. The Pythagorean system is perfect within a small range of tones and in the simple keys, but it becomes inadequate in others. Despite this, this system was used for Middle Age religious music, which was performed (sung) using only the simple keys.

Just Intonation This system is one of the pure systems in which many of the fifths and thirds are acoustically correct. Try setting the root to C and playing C, E, G.

Keyboard Settings

430A-E-032A

E-31

Using Baroque Pitch During the Baroque Era, standard pitch (A4) was lower than the modern standard. The Baroque pitch setting of your digital piano lets you play Baroque era music at the pitch it was written for.

Use the keys shown below to change the Baroque pitch setting.

A5 .... ON: Baroque pitch (A4 = 415.3Hz) G5 ..... OFF: Modern standard (A4 = 440.0Hz)

To turn Baroque pitch off and on

1 Hold down the SETTING button. Note that you must keep the SETTING button depressed until step 3, below.

2 While still holding down the SETTING button, switch baroque pitch on or off by pressing one of the keyboard keys illustrated below.

No sound is produced when the keys are pressed.

3 Release the SETTING button.

NOTE The Baroque pitch setting you make is retained until

you change it or until you switch power off. Whenever you switch power on, the default setting is off (A4 = 440.0Hz).

G5 A5 (black key)

Setting Range

G5 : OFF

A 5 (black key) : ON

Keyboard Settings

430A-E-033A

E-32

MIDI

430A-E-034A

What is MIDI? MIDI is a standard for digital signals and connectors that allows musical instruments, computers, and other devices, regardless of manufacturer, to exchange data with each other.

MIDI Connections Connecting your computer or other external MIDI device to the digital pianos MIDI IN/OUT terminals makes it possible for them to exchange MIDI messages and record and playback keyboard notes on the connected device.

[Bottom]

MIDI cable: MK-5

MIDI OUT MIDI IN

Specifying the Keyboard Channel The keyboard channel is the channel used when sending MIDI messages to another MIDI device. You can specify any channel from 1 through 16 as the keyboard channel.

To specify the keyboard channel

1 While holding down the SETTING button, specify the keyboard channel by pressing one of the keyboard keys shown in the illustration below.

Example: Channel 8

A note does not sound when you press a keyboard key while holding down SETTING.

NOTE The keyboard channel is automatically set to 1 whenever

you turn on the digital piano power.

Assigning Tones to Individual Channels

You can assign tones to channels using a Program Change message sent from a connected MIDI device. You cannot change the tone assigned to each channel from the digital piano.

NOTE The GRAND PIANO 1 tone is automatically assigned to

all channels whenever you turn on the digital piano power.

Simultaneous Receive Over Multiple Channels (Multi-Timbre) The Multi-Timbre mode makes it possible to assign the digital pianos built-in tones to MIDI channels 1 through 16. Then you can simultaneously sound multiple channels to play from a commercially available multi-track sequencer.

NOTE See Assigning Tones to Individual Channels on this

page for details on assigning tones to each channel. Up to 16 channels can be received simultaneously

(Channel 1 through channel 16). The number of channels to be received simultaneously

cannot be predetermined. If it becomes necessary to cancel a channel, the cancel operation must be performed on the sending side.

C4 A6 (svart tangent)

B7

E-33

MIDI

430A-E-035A

Sending Song Memory Playback Data You can send song memory playback as MIDI data. The send channel used depends on the keyboard channel setting, as shown in the table below.

Keyboard Play

Keyboard main tone data

Keyboard layer tone data

Keyboard split tone data

Main tone data inside of Track A playback data

Layer tone data inside of Track A playback data

Split tone data inside of Track A playback data

Main tone data inside of Track B playback data

Layer tone data inside of Track B playback data

Split tone data inside of Track B playback data

Keyboard Channel

Keyboard Channel

Keyboard Channel + 1*

Keyboard Channel + 2*

Keyboard Channel + 3*

Keyboard Channel + 4*

Keyboard Channel + 5*

Keyboard Channel + 6*

Keyboard Channel + 7*

Keyboard Channel + 8*

* Whenever adding the keyboard channel number to a value from 1 to 8 produces a result that is greater than 16, the send channel used is the one whose number is equal to the result minus 16.

NOTE Pedal effect data recorded to memory is applied to play

back from song memory, and does not affect your performance on the keyboard. Likewise, pedal operations on the digital piano are applied to the keyboard only, and not to play back from the song memory.

C4 G6: P

F 6 (svart tangent): Av

Turning Local Control On and Off This setting effectively determines whether or not the keyboard and pedals of the digital piano are connected to the digital pianos sound source.

To turn Local Control on and off

1 While still holding down the SETTING button, switch Local Control on and off by pressing one of the keyboard keys illustrated below.

A note does not sound when you press a keyboard key while holding down SETTING.

NOTE Note that no sound will be produced from the digital

pianos speakers if you press the keyboard while Local Control is turned off.

Local Control is turned on automatically whenever you turn on the digital piano power.

MIDI Data Notes This section provides details about the MIDI data this digital piano sends and receives. You can also find further technical information in the MIDI Data Format on page A-4 and MIDI Implementation Chart* at the end of this User s Guide.

* The MIDI Implementation Chart is a standard format summary of how data is transferred between this digital piano and a connected MIDI device.

Keyboard Data (Note On, Note Off, Note Number, Velocity)

The following four types of keyboard data can be sent and received.

Data Meaning

Note On Keyboard key is pressed.

Note Off Keyboard key is released.

Note Number Which key is pressed.

Velocity Pressure applied

E-34

MIDI

430A-E-036A

Tone Change Data (Program Change) A program number is data used for tone selection. Program numbers come in handy when using the tones of this digital piano to play MIDI data received from an external sequencer or other MIDI device. When the program number received from another devices does not match one of the built-in tones of this digital piano, however, the tone change is ignored and play continues without a tone change. The following shows the program numbers that are supported by this digital piano.

Pedal and Effect Operation Data (Control Change and Universal System Exclusive Message)

Control Change is used to send and receive data about damper, soft, and sostenuto pedal depress and release operations, as well as data about digital effects.

GRAND PIANO 1 2 0 0 2 0 0

BRIGHT PIANO 2 0 1 2 0 1

GRAND PIANO 2 0 0 0 0 0 0

HONKY-TONK 0 0 3 0 0 3

ELEC PIANO 1 16 0 4 16 0 4

ELEC PIANO 2 0 0 4 0 0 4

HARPSICHORD 0 0 6 0 0 6

VIBRAPHONE 0 0 11 0 0 11

PIPE ORGAN 1 0 0 19 0 0 19

PIPE ORGAN 2 24 0 19 24 0 19

STRINGS 1 2 0 49 2 0 49

STRINGS 2 0 0 48 0 0 48

CHOIR 0 0 52 0 0 52

SYNTH-PAD 0 0 88 0 0 88

ACOUSTIC BASS 0 0 32 0 0 32

RIDE ACO BASS 32 0 32 32 0 32

Tone Name

Send Receive

Bank Select

MSB LSB

Program numbers

Bank Select

MSB LSB

Program numbers

E-35

Troubleshooting

430A-E-037A

Symptom

No sound produced when keyboard keys are pressed.

Keyboard out of tune.

Pedal effect continues to be applied even though pedals are not pressed.

No sound produced by demo tune play.

Song Memory contents deleted.

Song Memory track cannot be selected.

Chords or scales sound strange.

No sound produced by connected external MIDI sound source when the digital piano keys are pressed.

Possible Cause

1. VOLUME slider set to MIN.

2. Headphones connected to the digital piano.

3. Local Control turned off.

1. Transpose is set to a value other than 0.

2. Incorrect tuning setting

3. Baroque pitch is turned on.

Problem with the connection between the pedals and the digital piano.

1. VOLUME slider set to MIN.

2. Headphones connected to the digital piano.

Lithium battery is dead.

Data recorded in the other track uses up all available Song Memory capacity.

Wrong temperament

1. The digital piano Basic Channel does not match the Basic Channel of the MIDI sound source.

2. Volume or expression setting of the external sound source is set to 0.

Reference

Page E-12

Page E-11

Page E-33

Page E-28

Page E-29

Page E-31

Page E-38

Page E-12

Page E-11

Page E-40

Page E-23

Page E-29

Page E-32

See the documenta- tion that comes with the external sound source.

Action

1. Move VOLUME slider more towards the MAX side.

2. Disconnect the headphones from the digital piano.

3. Turn on Local control.

1. Change the transpose setting to 0, or turn the digital piano power off and then back on again.

2. Correct the tuning setting, or turn the digital piano power off and then back on again.

3. Turn off baroque pitch or turn power off and then back on again.

Turn off the digital piano power and then check to make sure that the pedal plug is securely connected to the digital pianos pedal connector.

1. Move VOLUME slider more towards the MAX side.

2. Disconnect the headphones from the digital piano.

Contact your CASIO Service Provider for replacement of the lithium battery.

Delete the data recorded in the other track.

Return the temperament setting to equal temperament, or turn power off and then back on again.

1. Change the Basic Channel settings so they are identical.

2. Change the volume or expression setting of the external sound source to an appropriate value.

E-36

3

2

A E

E

I

I

I D

C

E

B

Assembly Instructions

CAUTION Take particular care to avoid injury when installing legs

and pedals, and when mounting the keyboard onto the stand.

When assembling, make sure that the sliding keyboard cover of the digital piano body is completely closed. If the cover is left open during assembly, it may close suddenly causing the fingers to be pinched between the digital piano body and cover.

Important! Be sure to assemble the stand on a flat surface. This stand does not include any of the tools required to

assemble it. You should have a large Phillips head (+) screwdriver on hand for assembly.

Check the items that come with the unit to make sure that everything shown in Figure 1 (A through I) is included. All screws are in a plastic bag inside of the packing cardboard.

Before starting actual assembly of the stand, undo the clip at location 1 (Figure 2) where the pedal cable comes out the back of crosspiece D.

1 Assembling the stand Refer to Figures 3, 4 and 5 as you assemble the stand according to the following procedure.

1.Attach side uprights A and B to crosspiece D using the four E screws (Figure 3). When joining the two pieces marked 2, the metal pieces 3 on the insides of side uprights A and B should fit into the slots at the ends of crosspiece D. Make sure the metal pieces are pushed into the slots as far as they will go. If they are not, the metal pieces 3 and the screws E will not match up correctly, which can cause stripping of the screws.

Figure 1

Figure 2

Figure 3

Crosspiece

Side upright

430A-E-038A

D

C 4

6

1

2

E F G H I2

A

B

1

E-37

Assembly Instructions

3.Rotate height adjustment screw 7 until it supports crosspiece D, preventing the crosspiece from bending when you press the pedals (Figure 5).

Important! Be sure to rotate adjustment screw 7 and perform the

adjustment procedure described above before depressing the pedals. Failure to do so can result in damage to crosspiece D.

2.Attach back panel C to the 4 brackets and crosspiece D. Note that the back panel C should be installed so it is in front of the 4 brackets (Figure 4). Use the two I screws, six F screws to secure the back panel in place (Figures 3 and 4). Note that you must also install the G clip at this time as shown in the illustration. First, install the topmost I screws on the left and right

sides of the back panel C. Note that you should slip the G clip onto the F screw at point 5 before you screw in the F screw.

The back panel C should rest on the feet of side uprights A and B as indicated by 6 in the illustration. Press the back panel C against crosspiece D while installing the I screws.

Figure 5

7

2 Installing the Keyboard onto the Stand

CAUTION Take care that you do not pinch your fingers between the keyboard and stand!

Be sure that you securely anchor the keyboard to the stand using the H butterfly bolts (Figure 6). Slide the screws on the bottom of the keyboard into the

slots in the two angle brackets 8. Next, secure the keyboard to the stand with two butterfly bolts H (Figure 7).

The butterfly bolts keep the keyboard from falling from the stand. Be sure that you always secure the keyboard with the butterfly bolts.

Figure 6

Figure 7

Front

Back

8

H

H

8

H8

Figure 4

5

4

6

F C

FG

I

I

AB

G

I

(Back)

430A-E-039A

E-38

Assembly Instructions

430A-E-040A

4 Connecting to a Power Supply

1.Check to make sure that the digital pianos POWER button is in the OFF position. If it is ON, press the button to switch it OFF.

2.Attach the power cord that comes with the digital piano to the bottom of the digital piano.*

3.Plug the digital pianos power cord into a wall outlet (Figure 9).

* applies to the AP-45V.

Important! The shapes of the digital pianos power cord and wall

outlet should be different according to countries or regions. The illustrations are examples.

With the AP-45, the power cord is hard-wired to the bottom of the instrument.

Attachment of the Score Stand

Install the music stand by inserting its pegs into the holes in the top of the piano.

Figure 9

Power cord

Household wall outlet

3 Connecting the Pedal

Position the pedal plug as shown in Figure 8 and insert it into the pedal connector on the bottom of the digital piano. Secure the pedal cable to the upright of the stand using the clips (Figure 8).

Figure 8

Clip

Pedal plug

CAUTION The screws that you use to assemble the stand may

become loose after a long period due to changes in temperature and humidity, or vibration caused by normal use, etc. Periodically check the screws used to fasten the stand and the butterfly bolts used to fasten the stand and the digital piano, and tighten them whenever necessary.

Power Outlet To power the digital piano, use a power outlet that allows

easy access when plugging in or unplugging the power cord.

E-39

Specifications

All of the items in these specifications apply to the AP-45 and AP-45V, unless specifically noted otherwise.

Models: AP-45/AP-45V

Keyboard: 88 piano keys (with touch response)

Polyphony: 64 notes, maximum

Tones: 16 Layer: Adjustable volume Split: Split point, adjustable volume

Digital Effects: Reverb (8 types), Chorus (8 types), Brilliance

Demo Tunes: Number of Tunes: 16 Playback: Repeat (all tunes, one tune)

Song Memory: Operations: Real-time recording, playback Number of Tracks: 2 (Track A, Track B) Capacity: Approximately 8,000 notes (total of 2 tracks) Memory Backup: Built-in lithium battery (Battery Life: Approximately 5 years)

Music Library: Number of Tunes: 50 Playback: All song repeat, specific song Part Off: L, R

Pedals: Damper, Soft, Sostenuto

Other Functions: Metronome: Beat (6 types), Tempo ( = 30 to 255) Touch Select: 3 types, off Transpose: 1 octave (F to C to F) Tuning: A4 = 440.0Hz 50 cents (adjustable) Temperament: 7 types Baroque pitch

MIDI: 16 multi-timbre receive

Input/Output: Headphones: Stereo standard jacks 2 LINE OUT (R, L / MONO): Standard jacks 2

Output Impedance ; 1.1K Output Voltage ; 1.3V (RMS) MAX

MIDI (OUT) (IN)

Speakers: 16cm 2, 5cm 2 (Output: 20 W + 20 W)

Power Supply: AP-45: 120V AP-45V: 220-240V

Power Consumption: AP-45: 60W AP-45V: 60W

Dimensions: Digital Piano (without stand): 136.9 43.9 23.0 cm (53 15/16 17 5/16 9 1/16 inch) Digital Piano: 137.9 44.8 83.8 cm (54 5/16 17 10/16 33 inch)

Weight: Digital Piano (without stand): approximately 34.0 kg (75.0 lbs) Digital Piano: approximately 46.0 kg (101.4 lbs)

Design and specifications are subject to change without notice. AP-45 has hardwired power cords. AP-45V has detachable power cords.

430A-E-041A

E-40

Operational Precautions

Locating the Unit Avoid the following locations. Areas exposed to direct sunlight and high humidity Areas subjected to very low temperatures Near a radio, TV, video deck, or tuner (unit can cause

interference with audio or video signals)

Care of the Unit Never use benzene, alcohol, thinner or other such chemicals

to clean the exterior of the unit. To clean the keyboard, use a soft cloth dampened with a

weak solution of a mild neutral detergent and water. Wring out all excess moisture from the cloth before wiping.

Lithium Battery This unit is equipped with a lithium battery to provide power needed to retain memory contents while unit power is turned off. Should the lithium battery go dead, all memory contents will be lost whenever you turn unit power off. The normal life of the lithium battery is about five years from the time that the battery was installed. Be sure to periodically contact your retailer or authorized service provider to have the lithium battery replaced. Note that you will be charged separately for lithium battery replacement.

Note that CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses or any claims by third parties arising from corruption or loss of data caused by malfunction or repair of the unit, or from battery replacement.

You may notice lines in the finish of the case of this product. These lines are the result of the molding process used to shape the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern.

NOTE Unauthorized reproduction of this manual in its entirety

or in part is expressly forbidden. All rights reserved. CASIO COMPUTER CO., LTD. shall not be held liable

for any damages or losses or any claims by third parties arising from use of this product or this manual.

The contents of this manual are subject to change without notice.

430A-E-042A

A-1

Appendix/Apndice

430A-E-085A

Initial Power On Settings The table below shows the initial settings of the digital piano whenever power is turned on.

Item Setting

Tone GRAND PIANO 1

Digital Effect Reverb Hall 1 (GRAND PIANO 1)

Chorus Off (GRAND PIANO 1)

Layer Off (Layer Volume: 72)

Split Off (Split Volume: 127),

Split point: B3

Metronome Volume 2

Tempo 120

Beat 4

Playback Track Recorded track

Touch Select Normal

Transpose C

Tuning A4 = 440.0Hz

Temperament Equal Temperament, Root C

Baroque Pitch Off

Music Library Off

Song Number 1

Part L On

Part R On

MIDI Keyboard Channel Channel 1

Local Control On

Tone Assigned to Each Channel GRAND PIANO 1

A-2

Ajustes iniciales al activarse la alimentacin La tabla siguiente muestra los ajustes iniciales del piano digital siempre que se activa la alimentacin.

Item Ajuste

Sonido GRAND PIANO 1

Efecto digital Reverberacin Hall 1 (GRAND PIANO 1)

Chorus Off (GRAND PIANO 1)

Estratificador Desactivado (Volumen del estratificador: 72)

Divisin Desactivado (volumen de divisin: 127),

Punto de divisin: B3

Metrnomo Volumen 2

Tempo 120

Tiempo 4

Pista de reproduccin Pista grabada

Seleccin de toque Normal

Transposicin C

Afinacin A4 = 440,0Hz

Temperamento Temperamento uniforme, nota fundamental C

Altura tonal barroca Desactivado

Biblioteca musical Desactivado

Nmero de cancin 1

Parte L (izquierda) Activado

Parte R (derecha) Activado

MIDI Canal de teclado Canal 1

Control local Activado

Sonido asignado a cada canal GRAND PIANO 1

430A-E-086A

Appendix/Apndice

A-3

Music Library Tunes/Melodas de la biblioteca musical

1

2 3 4

5

6 7 8 9

10

11

12

13

14

15

16

17

18 19 20 21 22 23

Klavierbchlein fr Anna Magdalena Bach Menuet Invention No.1 Invention No.8 Invention No.13 Wohltemperierte Klavier I Praeludium 1 Goldberg-Variationen Aria Goldberg-Variationen Var.30 Sonata K.545 1st Mov. Sonata K.331 1st Mov. Theme Sonata K.331 3rd Mov. Turkish March Variations on Ah, Vous DiRai-je, Maman K.265 Sonatina Op.36 No.1 1st Mov. Sonata Op.13 Pathtique 1st Mov. Sonata Op.13 Pathtique 2nd Mov. Sonata Op.13 Pathtique 3rd Mov. Sonata Op.27 No.2 Moonlight 1st Mov. Sonata Op.31 No.2 Tempest 3rd Mov. Fr Elise Moments Musicaux Op.94 No.3 Impromptu Op.142 No.3 Thema Marche Militaire No.1 (Duets) Nocturne Op.9 No.2 Fantaisie-Impromptu Op.66

Tune Number/

Nmero de meloda

Tune Name/Nombre de meloda

Etude Op.10 No.3 Chanson de ladieu Etude Op.10 No.5 Black Keys Etude Op.10 No.12 Revolutionary Prelude Op.28 No.7 Valse Op.64 No.1 Petit Chien Valse Op.64 No.2 Frhlicher Landmann Von fremden Lndern und Menschen Trumerei Arabesque La Chevaleresque La Prire dune Vierge Liebestrume No.3 Blumenlied Hungarian Dances No.5 (Duets) Rhapsodie No.2 Waltz Op.39 No.15 (Duets) Promenade From Tableaux dune Exposition Berceuse (Duets) Passepied La Fille aux Cheveux de Lin Arabesque No.1 The Entertainer Maple Leaf Rag Gymnopdies No.1 Gnossiennes No.1 Je Te Veux

24

25

26

27 28 29 30

31

32 33 34 35 36 37 38 39 40

41

42 43 44 45 46 47 48 49 50

J.S.Bach

J.S.Bach J.S.Bach J.S.Bach

J.S.Bach

J.S.Bach J.S.Bach

W.A.Mozart W.A.Mozart

W.A.Mozart

W.A.Mozart

M.Clementi

L.v.Beethoven

L.v.Beethoven

L.v.Beethoven

L.v.Beethoven

L.v.Beethoven

L.v.Beethoven F.P.Schubert F.P.Schubert F.P.Schubert F.F.Chopin F.F.Chopin

F.F.Chopin

F.F.Chopin

F.F.Chopin

F.F.Chopin F.F.Chopin F.F.Chopin

R.Schumann

R.Schumann

R.Schumann F.Burgmller F.Burgmller

T.Badarzewska F.Liszt

G.Lange J.Brahms J.Brahms J.Brahms

M.Mussorgsky

G.Faur C.A.Debussy C.A.Debussy C.A.Debussy

S.Joplin S.Joplin E.Satie E.Satie E.Satie

Tune Number/

Nmero de meloda

Composer/

Compositor Tune Name/Nombre de melodaComposer/

Compositor

430A-E-087A

Appendix/Apndice

A-4

MIDI Data Format

430A-E-088A

It em

s m

ar ke

d

ar e

re ce

iv e

on ly

.

C h

an n

el M

es sa

g es

N o

te M

es sa

g es

N o

te O

ff R

ec o

g n

it io

n

Fo rm

at n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) kk

... ...

.. N

ot e

N u

m be

r =

0 0H

t o

7F H

vv ...

... ..

N ot

e O

ff V

el oc

it y

= 0

0H t

o 7F

H

R em

ar ks

N ot

e O

ff V

el oc

it y

va lu

e is

ig no

re d

.

S en

d

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) kk

... ...

.. N

ot e

N u

m be

r =

1 5H

t o

6C H

vv ...

... ..

N ot

e O

ff V

el oc

it y

= 4

0H

N o

te O

n R

ec o

g n

it io

n

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) kk

... ...

.. N

ot e

N u

m be

r =

0 0H

t o

7F H

vv ...

... ..

N ot

e O

n V

el oc

it y

= 0

0H t

o 7F

H

S en

d

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) kk

... ...

.. N

ot e

N u

m be

r =

1 5H

t o

6C H

vv ...

... ..

N ot

e O

n V

el oc

it y

= 0

1 to

7 FH

B yt

e 1

B yt

e 2

B yt

e 3

8n H

kk H

vv H

9n H

kk H

00 H

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) m

m ...

.. D

at a

en tr

y M

SB v

al u

e fo

r th

e p

ar am

et er

th at

is s

el ec

te d

by R

P N

a nd

N R

P N

ll ...

... ...

. D

at a

en tr

y L

SB v

al u

e fo

r th

e p

ar am

et er

t ha

t is

s el

ec te

d by

R P

N a

nd N

R P

N

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) m

m ...

.. B

an k

N u

m be

r M

SB =

0 0H

ll ...

... ...

. B

an k

N u

m be

r L

SB =

0 0H

Se nd

A B

an k

Se le

ct m

es sa

ge is

s en

t a t t

he s

am e

ti m

e w

he n

yo u

s el

ec t a

to ne

o n

th e

in st

ru m

en t.

M o

d u

la ti

o n

W h

ee l

Fo rm

at n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. M

od u

la ti

on D

ep th

= 0

0H t

o 7F

H

P o

rt am

en to

T im

e

Fo rm

atC o

n tr

o l C

h an

g e

B an

k S

el ec

t Fo

rm at n

... ...

... .

V oi

c e C

ha nn

el N

u m

be r

= 0

H t

o FH

( C

h1 t

o C

h1 6)

vv ...

... ..

P or

ta m

en to

T im

e =

0 0H

t o

7F H

D at

a E

n tr

y Fo

rm at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

01 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

8n H

kk H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

9n H

kk H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

9n H

kk H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

00 H

m m

H (

B an

k Se

le ct

M SB

)

B nH

20 H

ll H

( B

an k

Se le

ct L

SB )

B yt

e 1

B yt

e 2

B yt

e 3

B nH

05 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

06 H

m m

H (

D at

a E

nt ry

M SB

)

B nH

26 H

ll H

( D

at a

E nt

ry L

SB )

B yt

e 1

B yt

e 2

B yt

e 3

B nH

0A H

vv H

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. P

an =

0 0H

( le

ft )

t o

40 H

( ce

nt er

) t

o 7F

H (

ri gh

t)

E xp

re ss

io n

C o

n tr

o lle

r

Fo rm

at n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. E

xp re

ss io

n =

0 0H

to 7

FH

H o

ld 1

( D

am p

er P

ed al

) Fo

rm at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

0B H

vv H

R ec

og ni

ti on

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. H

ol d

1 =

0 0H

to 7

FH (0

0H to

3 FH

:O FF

, 4 0H

to 7

FH :O

N )

Se nd

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. H

ol d

1 =

0 0H

,7 FH

(0 0H

:O FF

, 7 FH

:O N

)

P o

rt am

en to

Fo

rm atn

... ...

... .

V oi

ce C

ha nn

el N

u m

be r

= 0

H t

o FH

( C

h1 t

o C

h1 6)

vv ...

... ..

V ol

u m

e =

0 0H

t o

7F H

P an

Fo

rm at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

07 H

vv H

C h

an n

el V

o lu

m e

Fo rm

at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

40 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

41 H

vv H

R ec

og ni

ti on

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. P

or ta

m en

to =

0 0H

t o

7F H

( 00

H t

o 7F

H :O

FF , 7

FH :O

N )

A-5430A-E-089A

R ec

og ni

ti on

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. So

st en

u to

= 0

0H t

o 7F

H (

00 H

t o

3F H

:O FF

, 40

H t

o 7F

H :O

N )

Se nd

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. So

st en

u to

= 0

0H , 7

FH (

00 H

:O FF

, 7 FH

:O N

)

S o

ft Fo

rm at

R ec

og ni

ti on

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. So

ft =

0 0H

t o

7F H

( 00

H t

o 3F

H :O

FF , 4

0H t

o 7F

H :O

N )

Se nd

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. So

ft =

0 0H

, 7 FH

(0 0H

:O FF

, 7 FH

:O N

)

R es

o n

an ce

Fo

rm at

S o

st en

u to

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. Fi

lt er

R es

on an

ce =

0 0H

t o

7F H

R el

ea se

T im

e

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. A

M P

R el

ea se

T im

e =

0 0H

t o

7F H

A tt

ac k

T im

e

Fo rm

at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

42 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

43 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

47 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

48 H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

5B H

vv H

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. R

ev er

b Se

nd L

ev el

= 0

0H t

o 7F

H

E ff

ec t

3 D

ep th

( C

h o

ru s

S en

d L

ev el

) Fo

rm at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

5D H

vv H

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) kk

... ...

.. So

u rc

e N

ot e

N u

m be

r =

0 0H

t o

7F H

E ff

ec t

1 D

ep th

( R

ev er

b S

en d

L ev

el )

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. C

ho ru

s Se

nd L

ev el

= 0

0H t

o 7F

H

N R

P N

( N

o n

-R eg

is te

re d

P ar

am et

er N

u m

b er

s)

Fo rm

atn ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. Fi

lt er

C u

to ff

F re

qu en

cy =

0 0H

t o

7F H

P o

rt am

en to

C o

n tr

o l

Fo rm

at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

4A H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

54 H

kk H

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) p

m ...

... M

SB o

f N

R P

N p

l . ...

... ..

L SB

o f

N R

P N

B yt

e 1

B yt

e 2

B yt

e 3

B nH

63 H

p m

H (

M SB

)

B nH

62 H

p lH

( L

SB )

B yt

e 1

B yt

e 2

B yt

e 3

B nH

49 H

vv H

B ri

g h

tn es

s

Fo rm

at

n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. A

M P

A tt

ac k

Ti m

e =

0 0H

t o

7F H

R ec

og ni

ti on

N

R P

N m

es sa

ge s

no t

d ef

in ed

b y

th e

in st

ru m

en t

ca n

al so

b e

re ce

iv ed

, bu

t su

bs eq

u en

t d

at a

en tr

y va

lu es

a ft

er u

nd ef

in ed

N R

P N

m es

sa ge

s ar

e ig

no re

d .

A

ft er

th e

N R

P N

M SB

a nd

L SB

a re

r ec

ei ve

d a

nd th

e ap

p li

ca bl

e co

nt ro

l p ar

am et

er s

se tt

in gs

a re

m ad

e, th

e va

lu e

is s

et b

y re

ce ip

t of

th e

M SB

o f t

he s

u bs

eq u

en t d

at a

en tr

y. T

he d

at a

en tr

y L

SB is

ig no

re d

.

V ib

ra to

R at

e

N R

P N

M SB

= 0

1H N

R P

N L

SB =

0 8H

D at

a E

nt ry

M SB

= m

m H

m m

... .V

ib ra

to R

at e

= 0

0H t

o 40

H t

o 7F

H (

-6 4

to 0

t o

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

ce iv

es t

hi s

m es

sa ge

, t he

p re

se t

V ib

ra to

R at

e va

lu e

fo r

th e

to ne

is c

ha ng

ed to

th e

V ib

ra to

R at

e va

lu e

th at

co rr

es p

on d

s to

th e

d at

a en

tr y

M SB

o f t

he re

ce iv

ed m

es sa

ge . T

he re

is n

o ch

an ge

w he

n th

e va

lu e

of t

he d

at a

en tr

y M

SB is

4 0H

(0 ).

V ib

ra to

D ep

th

N R

P N

M SB

= 0

1H N

R P

N L

SB =

0 9H

D at

a E

nt ry

M SB

= m

m H

m m

... .V

ib ra

to D

ep th

= 0

0H t

o 40

H t

o 7F

H (

-6 4

to 0

t o

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

c e iv

es t

hi s

m es

sa ge

, t he

p re

se t

V ib

ra to

D ep

th v

al u

e fo

r t he

to ne

is c

ha ng

ed to

th e

va lu

e th

at c

or re

sp on

d s

to th

e d

at a

en tr

y M

SB o

f t he

re ce

iv ed

m es

sa ge

. T he

re is

n o

ch an

ge w

he n

th e

va lu

e of

t he

d at

a en

tr y

M SB

is 4

0H (0

).

V ib

ra to

D el

ay

N R

P N

M SB

= 0

1H N

R P

N L

SB =

0 A

H D

at a

E nt

ry M

SB =

m m

H

m m

... . V

ib ra

to D

el ay

= 0

0H t

o 40

H t

o 7F

H (

-6 4

to 0

t o

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

c e iv

es t

hi s

m es

sa ge

, t he

p re

se t

V ib

ra to

D el

ay v

al u

e fo

r th

e to

ne is

c ha

ng ed

to th

e va

lu e

th at

c or

re sp

on d

s to

th e

d at

a en

tr y

M SB

o f t

he re

ce iv

ed m

es sa

ge . T

he re

is n

o ch

an ge

w he

n th

e va

lu e

of t

he d

at a

en tr

y M

SB is

4 0H

(0 ).

MIDI Data Format

A-6

MIDI Data Format

430A-E-090A

p p

... ...

. P ro

gr am

N u

m be

r =

0 0H

t o

7F H

Se nd

P ro

gr am

C ha

ng e

m es

sa ge

s ar

e se

nt w

he n

yo u

s el

ec t

a to

ne o

n th

e in

st ru

m en

t.

P it

ch B

en d

C h

an g

e

Fo rm

at

B yt

e 1

B yt

e 2

C nH

p p

H

n ...

... ...

V oi

c e C

ha nn

el N

u m

be r

= 0

H t

o FH

( C

h1 t

o C

h1 6)

ll ...

... ...

P it

c h B

en d

C ha

ng e

L SB

= 0

0H t

o 7F

H m

m ...

.P it

c h B

en d

C ha

ng e

M SB

= 0

0H t

o 7F

H

B yt

e 1

B yt

e 2

B yt

e 3

E nH

ll H

m m

H

F ilt

er C

u t

O ff

F re

q u

en cy

N R

P N

M SB

= 0

1H N

R P

N L

SB =

2 0H

D at

a E

nt ry

M SB

= m

m H

m m

... . F

il te

r C

u t O

ff F

re qu

en cy

= 0

0H to

4 0H

to 7

FH (-

64 to

0 to

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t r ec

ei ve

s th

is m

es sa

ge , t

he p

r e se

t F il

te r

C u

t of

f Fr

eq u

en cy

v al

u e

fo r

th e

to ne

i s

ch an

ge d

t o

th e

va lu

e th

at co

rr es

p on

d s

to th

e d

at a

en tr

y M

SB o

f t he

re ce

iv ed

m es

sa ge

. T he

re is

n o

ch an

ge w

he n

th e

va lu

e of

t he

d at

a en

tr y

M SB

is 4

0H (0

).

F ilt

er R

es o

n an

ce

N R

P N

M SB

= 0

1H N

R P

N L

SB =

2 1H

D at

a E

nt ry

M SB

= m

m H

m m

... .R

es on

an ce

= 0

0H t

o 40

H t

o 7F

H (

-6 4

to 0

t o

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

ce iv

es t

hi s

m es

sa ge

, th

e p

re se

t Fi

lt er

R es

on an

ce v

al u

e fo

r th

e to

n e

is c

h an

ge d

t o

th e

v al

u e

th at

co rr

es p

on d

s to

th e

d at

a en

tr y

M SB

o f t

he re

ce iv

ed m

es sa

ge . T

he re

is n

o ch

an ge

w he

n th

e va

lu e

of t

he d

at a

en tr

y M

SB is

4 0H

(0 ).

F ilt

er /A

M P

E n

ve lo

p e

A tt

ac k

T im

e

N R

P N

M SB

= 0

1H N

R P

N L

SB =

6 3H

D at

a E

nt ry

M SB

= m

m H

m m

... .F

il te

r/ A

M P

E nv

el op

e A

tt ac

k Ti

m e

= 0

0H t

o 40

H t

o 7F

H (-

64 t

o 0

to +

63 )

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

c e iv

es t

hi s

m es

sa ge

, th

e p

re se

t Fi

lt er

/ A

M P

E nv

el op

e A

tt ac

k Ti

m e

va lu

e fo

r th

e to

ne is

c ha

ng ed

to th

e va

lu e

th at

c or

re sp

on d

s to

t he

d at

a en

tr y

M SB

o f

th e

r e c e

iv ed

m es

sa ge

. T

he re

i s

no c

ha ng

e w

he n

th e

va lu

e of

t he

d at

a en

tr y

M SB

is 4

0H (0

).

F ilt

er /A

M P

E n

ve lo

p e

D ec

ay T

im e

N R

P N

M SB

= 0

1H N

R P

N L

SB =

6 4H

D at

a E

nt ry

M SB

= m

m H

m m

... .F

il te

r/ A

M P

E nv

el op

e D

ec ay

T im

e =

0 0H

t o

40 H

t o

7F H

(- 64

t o

0 to

+ 63

)

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

c e iv

es t

hi s

m es

sa ge

, th

e p

re se

t Fi

lt er

/ A

M P

E nv

el op

e D

ec ay

T im

e va

lu e

fo r

th e

to ne

is c

ha ng

ed t

o th

e va

lu e

th at

c or

re sp

on d

s to

t he

d at

a en

tr y

M SB

o f

th e

r e c e

iv ed

m es

sa ge

. T

he re

i s

no c

ha ng

e w

he n

th e

va lu

e of

t he

d at

a en

tr y

M SB

is 4

0H (0

).

F ilt

er /A

M P

E n

ve lo

p e

R el

ea se

T im

e

N R

P N

M SB

= 0

1H N

R P

N L

SB =

6 6H

D at

a E

nt ry

M SB

= m

m H

m m

... . F

il te

r/ A

M P

E nv

el op

e R

el ea

se T

im e

= 0

0H to

4 0H

to 7

FH (-

64 t

o 0

to +

63 )

R ec

og ni

ti on

W he

n th

e in

st ru

m en

t re

ce iv

es t

hi s

m es

sa ge

, th

e p

r e se

t Fi

lt er

/ A

M P

E nv

el op

e R

el ea

se T

im e

va lu

e fo

r th

e to

ne is

c ha

ng ed

to th

e va

lu e

th at

c or

re sp

on d

s to

t he

d at

a en

tr y

M SB

o f

th e

r e ce

iv ed

m es

sa ge

. T

he re

i s

no c

ha ng

e w

he n

th e

va lu

e of

t he

d at

a en

tr y

M SB

is 4

0H (0

).

R P

N (

R eg

is te

re d

P ar

am et

er N

u m

b er

s) Fo

rm at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

65 H

qm H

( M

SB )

B nH

64 H

ql H

( L

SB )

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) qm

... ...

. M

SB o

f R

P N

ql ...

... ...

L SB

o f

R P

N

R ec

og ni

ti on

R

P N

m es

sa ge

s n

ot d

ef in

ed b

y th

e in

st ru

m en

t ca

n a

ls o

be re

c e iv

ed ,

bu t

su bs

eq u

en t

d at

a en

tr y

va lu

es a

ft er

u nd

ef in

ed R

P N

m es

sa ge

s ar

e ig

no re

d .

A

ft er

t h

e M

SB a

n d

L SB

o f

an R

P N

a r e

r ec

ei v

ed a

n d

t h

e ap

p li

c a bl

e c o

nt ro

l p ar

am et

er s

se tt

in gs

a re

m ad

e, t

he v

al u

e is

se t

by r

ec ei

p t

of t

he M

SB o

f th

e su

bs eq

u en

t d

at a

en tr

y. T

he d

at a

en tr

y L

SB is

ig no

re d

.

Se nd

A n

R P

N i

s s e

n t

w h

en ev

er a

n o

p er

at io

n t

h at

c h

an g

es t

h e

p ar

am et

er a

ss ig

ne d

t o

th e

R P

N is

p er

fo rm

ed .

P it

ch B

en d

S en

si ti

vi ty

R P

N M

SB =

0 0H

R P

N L

SB =

0 0H

D at

a E

nt ry

M SB

= m

m H

m m

... .P

it c h

B en

d S

en si

ti vi

ty =

0 0H

t o

18 H

( 0

to 2

4 se

m it

on es

)

R ec

og ni

ti on

T he

d at

a en

tr y

L SB

is a

lw ay

s ig

no re

d .

M as

te r

F in

e Tu

n in

g

R P

N M

SB =

0 0H

R P

N L

SB =

0 1H

D at

a E

nt ry

M SB

= m

m H

D at

a E

nt ry

L SB

= ll

H

m m

ll ...

. M

as te

r Fi

ne T

u ni

ng =

0 0

00 H

to 4

0H 0

0H to

7 FH

7 FH

(- 10

0 to

0 t

o +

99 .9

9 c e

nt s)

M as

te r

C o

ar se

T u

n in

g

R P

N M

SB =

0 0H

R P

N L

SB =

0 2H

D at

a E

nt ry

M SB

= m

m H

m m

... .M

as te

r C

oa rs

e Tu

ni ng

= 2

8H t

o 40

H t

o 58

H (

-2 4

to 0

t o

+ 24

s em

it on

es )

R ec

og ni

ti on

T he

d at

a en

tr y

L SB

is a

lw ay

s ig

no r e

d .

R P

N N

u ll

R P

N M

SB =

7 FH

R P

N L

SB =

7 FH

R ec

og ni

ti on

O nc

e an

R P

N N

u ll

is s

en t,

al l r

ec ei

ve d

d at

a en

tr y

M SB

s an

d L

SB s

ar e

ig no

re d

u nt

il a

no th

er R

P N

m es

sa ge

o th

er th

an R

P N

N u

ll o

r an

N R

P N

m es

sa ge

is r

ec ei

ve d

.

P ro

g ra

m C

h an

g e

Fo rm

at

R ec

og ni

ti on

T

he v

al u

e ll

H m

m H

is 0

0H 0

0H a

t th

e lo

w es

t p

it c h

, 0 0H

4 0H

at m

id -p

it c h

, a nd

7 FH

7 FH

a t

th e

hi gh

es t

p it

c h .

Yo

u h

av e

to s

et b

ot h

th e

L SB

a nd

M SB

t og

et he

r to

f or

m a

1 4-

bi t v

al u

e an

d m

ak e

a P

it c h

B en

d C

ha ng

e m

es sa

ge r

ec og

ni ze

d by

t he

in st

ru m

en t.

A-7

MIDI Data Format

430A-E-091A

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6)

R ec

og ni

ti on

R ec

ei p

t o f t

hi s

m es

sa ge

im m

ed ia

te ly

m u

te s

al l t

on es

p la

yi ng

o ve

r th

e M

ID I

ch an

ne ls

.

R es

et A

ll C

o n

tr o

lle r

Fo rm

at n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6)

R ec

og ni

ti on

R ec

ei p

t o f t

he R

es et

A ll

C on

tr ol

le r

m es

sa ge

c au

se s

th e

fo ll

ow in

g co

nt ro

ll er

s to

b e

re se

t.

C o

n tr

o lle

r N

am e

R es

et V

al u

e

M od

u la

ti on

W he

el vv

H =

0 0H

E xp

re ss

io n

C on

tr ol

le r

vv H

= 7

FH

H ol

d 1

vv H

= 0

0H

P or

ta m

en to

vv H

= 0

0H

So st

en u

to vv

H =

0 0H

So ft

vv H

= 0

0H

N R

P N

m sb

= 7

FH , l

sb =

7 FH

R P

N m

sb =

7 FH

, l sb

= 7

FH

P it

c h B

en d

C ha

ng e

ll H

m m

H =

0 0H

4 0H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

79 H

00 H

A ll

N o

te O

ff Fo

rm at n

... ...

... .

V oi

ce C

ha nn

el N

u m

be r

= 0

H t

o FH

( C

h1 t

o C

h1 6)

R ec

og ni

ti on

R ec

ei p

t o f t

he A

ll N

ot e

O ff

m es

sa ge

m u

te s

al l t

on es

b ei

ng p

la ye

d by

d at

a re

ce iv

ed o

ve r

th e

M ID

I ch

an ne

ls (

no te

o f f

). If

H ol

d 1

o r S

os te

nu to

is tu

rn ed

o n

w he

n th

e A

ll N

ot e

O ff

m es

sa ge

is r

ec ei

v ed

, n

o te

s ar

e su

st ai

n ed

i n

a cc

o r d

an ce

w it

h t

h e

co rr

es p

on d

in g

p ed

al o

p er

at io

n.

Se nd

T hi

s m

es sa

ge is

s en

t w he

n th

e C

O N

T R

O L

bu tt

on is

p re

ss ed

a nd

w he

n so

ng m

em or

y p

la yb

ac k

is s

to p

p ed

.

O m

n i M

o d

e O

ff

Fo rm

at n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6)

R ec

og ni

ti on

R ec

ei p

t of

a n

O m

n i

M od

e O

n m

es sa

ge d

oe s

n ot

t u

rn o

n t

h e

in st

ru m

en t

O m

ni M

od e.

R ec

ei p

t of

a n

O m

ni M

od e

O n

m es

sa ge

is t

re at

ed a

s an

A ll

N ot

e O

ff m

es sa

ge .

O m

n i M

o d

e O

n

Fo rm

at n ...

... ...

. V

oi c e

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6)

R ec

og ni

ti on

R ec

ei p

t of

a n

O m

n i

M od

e O

n m

es s a

ge d

oe s

n ot

t u

rn o

n t

h e

in st

ru m

en t

O m

ni M

od e.

R ec

ei p

t of

a n

O m

ni M

od e

O n

m es

sa ge

is tr

ea te

d a

s an

A ll

N ot

e O

ff m

es sa

ge .

B yt

e 1

B yt

e 2

B yt

e 3

B nH

7C H

00 H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

7B H

00 H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

7D H

00 H

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6) vv

... ...

.. N

u m

be r

of M

on o

M od

e C

ha nn

el s

= 0

0H t

o 10

H

R ec

og ni

ti on

R ec

ei p

t of

a M

on o

M od

e O

n m

es sa

ge d

oe s

n ot

t u

rn o

n t

h e

in st

ru m

en t

M on

o M

od e.

R ec

ei p

t of

a M

on o

M od

e O

n m

es sa

ge is

tr ea

te d

a s

an A

ll So

u nd

O ff

m es

sa ge

a nd

A ll

N ot

e O

ff m

es sa

ge .

P o

ly M

o d

e O

n

Fo rm

at

B yt

e 1

B yt

e 2

B yt

e 3

B nH

7E H

vv H

B yt

e 1

B yt

e 2

B yt

e 3

B nH

7F H

00 H

n ...

... ...

. V

oi ce

C ha

nn el

N u

m be

r =

0 H

t o

FH (

C h1

t o

C h1

6)

R ec

ei ve R

ec ei

p t

of a

P ol

y M

od e

O n

m es

sa ge

b y

th e

in st

ru m

en t

se ts

C ha

nn el

n t

o M

od e

3 an

d i

s p

r o ce

ss ed

a s

if a

n A

ll S

ou nd

O ff

m es

sa ge

a nd

A ll

N ot

e O

ff m

es sa

ge w

er e

re ce

iv ed

.

B yt

e 1

B yt

e 2

B yt

e 3

B nH

78 H

00 H

M o

n o

M o

d e

O n

Fo

rm at

C h

an n

el M

o d

e M

es sa

g e

A ll

S o

u n

d O

ff

Fo rm

at

A-8

MIDI Data Format

430A-E-092A

Se nd

T hi

s m

es sa

ge i

s se

nt w

he n

a ch

or u

s sw

it ch

o p

er at

io n

or o

th er

ch or

u s

ty p

e se

tt in

g op

er at

io n

is p

er fo

rm ed

.

R ec

ei ve R

ec ei

p t

of t

hi s

m es

sa ge

s et

s th

e ch

or u

s ty

p e.

S ys

te m

M es

sa g

es

U n

iv er

sa l S

ys te

m E

xc lu

si ve

M es

sa g

e

G M

S ys

te m

O n

Fo

rm at F0

H 7E

H 7F

H 09

H 01

H F7

H

Se nd

T hi

s m

es sa

ge c

an no

t be

s en

t.

R ev

er b

T yp

e Fo

rm at F0

7F 7F

04 05

01 01

01 01

01 p

p vv

F7

R ev

er b

Ty p

e p

p =

0; vv

= 0:

R oo

m 1

= 1:

R oo

m 2

= 2:

R oo

m 3

= 3:

H al

l1 =

4: H

al l2

= 6:

D el

ay =

7: P

an D

el ay

= 8:

S ta

ge

Se nd

T hi

s m

es sa

ge i

s se

nt w

he n

a r e

ve rb

s w

it c h

o p

er at

io n

or o

th er

re ve

rb t

yp e

se tt

in g

op er

at io

n is

p er

fo rm

ed .

R ec

ei ve R

ec ei

p t

of t

hi s

m es

sa ge

s et

s th

e re

ve rb

t yp

e.

C h

o ru

s Ty

p e

Fo rm

at F0 7F

7F 04

05 01

01 01

01 02

p p

vv F7

C ho

ru s

Ty p

e p

p =

0; vv

= 0:

C ho

ru s1

= 1:

C ho

ru s2

= 2:

C ho

ru s3

= 3:

C ho

ru s4

= 4:

F -b

ac kC

ho ru

s =

5: F

la ng

er =

6: S

ho rt

D el

ay =

7: S

ho rt

D el

ay FB

430A-E-098A

B as

ic D

ef au

lt C

h an

n el

C h

an g

ed

D ef

au lt

M o

d e

M es

sa g

es A

lt er

ed

N o

te N

u m

b er

T ru

e vo

ic e

V el

o ci

ty N

o te

O N

N o

te O

F F

A ft

er K

ey s

T o

u ch

C h

s

P it

ch B

en d

er

C o

n tr

o l

C h

an g

e

1 1-

16

M od

e 3

X

21 -1

08

O 9

nH V

= 1

-1 27

X 8

nH V

= 6

4

X X X

1- 16

1- 16

M od

e 3

X

0- 12

7 0-

12 7

O 9

nH V

= 1

-1 27

X 9

nH V

= 0

,8 nH

V =

**

X X O

M od

el A

P -4

5 M

ID I I

m p

le m

en ta

ti o

n C

h ar

t V

er si

on : 1

.0

F u

n ct

io n

.. .

T ra

n sm

it te

d R

ec o

g n

iz ed

R em

ar ks

0, 32 1 5

6. 38 7 10 11 64 65 66 67 71

O X X

O *1

X X X O X O O X

O O O

O *1

O O O O O O O O

B an

k se

le ct

M od

ul at

io n

P or

ta m

en to

T im

e D

at a

en tr

y V

ol um

e P

an E

xp re

ss io

n D

am pe

r P

or ta

m en

to S

os te

nu to

S of

t R

es on

an ce

** =

n o

re la

tio n

** =

s in

r el

ac i

n

430A-E-099A

P ro

g ra

m C

h an

g e

:T ru

e #

S ys

te m

E xc

lu si

ve

S ys

te m

: S

o n

g P

o s

C o

m m

o n

: S

o n

g S

el :

T u

n e

S ys

te m

: C

lo ck

R ea

l T im

e :

C o

m m

an d

s

A u

x :

L o

ca l O

N /O

F F

: A

ll n

o te

s O

F F

M es

sa g

es :

A ct

iv e

S en

se :

R es

et

R em

ar ks

O

O X X X X X X O X X

O *2 O X X X X X X O O X

M od

e 1

: O M

N I O

N , P

O LY

M od

e 2

: O M

N I O

N , M

O N

O O

: Y es

M od

e 3

: O M

N I O

F F

, P O

LY M

od e

4 : O

M N

I O F

F , M

O N

O X

: N o

72 73 74 84 91 93 98

,9 9

10 0,

10 1

12 0

12 1

X X X X O O X O X X

O O O O O O O O O O

R el

ea se

T im

e A

tta ck

T im

e P

or ta

m en

to C

on tr

ol B

rig ht

ne ss

R ev

er b

se nd

C ho

ru s

se nd

N R

P N

L S

B , M

S B

R P

N L

S B

, M S

B A

ll so

un d

of f

R es

et a

ll co

nt ro

lle r

*1 :

F in

e tu

ne a

nd c

oa rs

e tu

ne s

en d/

re ce

iv e,

a nd

R P

N N

ul l,

pi tc

h be

nd s

en se

, v ib

ra to

r at

e, v

ib ra

to d

ep th

, vi

br at

o de

la y,

F ilt

er c

ut o

ff fr

eq ue

nc y,

F ilt

er r

es on

an ce

, F ilt

er /A

M P

e nv

el op

e at

ta ck

ti m

e, F

ilt er

/A M

P en

ve lo

pe d

ec ay

ti m

e an

d F

ilt er

/A M

P e

nv el

op e

re le

as e

tim e

re ce

iv es

*1 :

E nv

o /r

ec ep

ci n

d e

af in

ac i

n fin

a y

de a

fin ac

i n

gr ue

sa , y

R P

N n

ul o,

d et

ec ci

n d

e in

fle xi

n d

e al

tu ra

to na

l, ve

lo ci

da d

de v

ib ra

to , p

ro fu

nd id

ad d

e vi

br at

o, r

et ar

do d

e vi

br at

o, fr

ec ue

nc ia

d e

co rt

e de

l f ilt

ro , r

es on

an ci

a de

fi ltr

o, r

ec ep

ci n

d e

tie m

po d

e at

aq ue

d e

en vo

lv en

te d

e F

ilt ro

/A M

P , d

e tie

m po

d e

ex tin

ci n

d e

en vo

lv en

te d

e F

ilt ro

/A M

P , y

d e

tie m

po d

e lib

er ac

i n

de e

nv ol

ve nt

e de

F ilt

ro /A

M P

. *2

: S

ee th

e pr

og ra

m n

um be

rs t

ab le

o n

pa ge

E -3

4. *2

: V

ea la

T ab

la d

e n

m er

os d

e pr

og ra

m a

de la

p g

in a

S -3

4.

This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany.

Esta marca de reciclaje indica que el empaquetado conforma a la legislacin de proteccin ambiental en Alemania.

MA0703-C Printed in China AP45ES1C

CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome </

Manualsnet FAQs

If you want to find out how the Celviano Casio works, you can view and download the Casio Celviano AP45 Keyboard User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Casio Celviano as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Casio Celviano. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio Celviano AP45 Keyboard User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio Celviano AP45 Keyboard User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio Celviano AP45 Keyboard User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio Celviano AP45 Keyboard User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio Celviano AP45 Keyboard User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.