Operation Guide DQ-745/PQ-65
2
GENERAL GUIDE
1 SNOOZE/LIGHT button Press this button to illuminate the display for about five seconds. Pressing this button while the alarm is sounding stops the alarm.
2 Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off
3 + / buttons Use these buttons to change the alarm time or the setting that is flashing on the display.
4 C/F button Press this button to toggle the temperature units between Celsius and Fahrenheit.
5 SET button Use this button when setting the current time.
6 RESET button Press this button to reset the clock after replacing its batteries.
7 SOUND Selector (DQ-745 only) Use this selector to select the alarm volume.
Buttons marked INVALID have no function.
USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below.
12-hour/24-hour Timekeeping ScreenTime Setting ScreenMonth and Day Setting ScreenYear Setting Screen
Normal Timekeeping Screen
2. While the screen you want is displayed, use the + and buttons (3) to change the flashing digits.
ALARM SET
Press + to increase the flashing digits.
Press to decrease the flashing digits.
Press + to increase the flashing digits.
Press to decrease the flashing digits.
DQ-745 PQ-65
Holding down + or changes the flashing digits at high speed. You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with
the date setting. Pressing + or while the Time Setting Screen is on the display causes the seconds count to be reset to 00. Each press of + or while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour
and 24-hour timekeeping. 3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.
Alarm Mode selector
SNZ
ON
OFF
Description
The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/ LIGHT button (1), the alarm sounds again five minutes later.
The indicator flashes on the display to indicate that the snooze feature is activated.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature.
Setting the Alarm Time Use the + and buttons (3) to set the alarm time. Pressing the + and buttons (3) causes the alarm time to appear in place of the date on the display.
ALARM SET
Press + to change the alarm time setting.
Press to change the alarm time setting.
Press + to change the alarm time setting.
Press to change the alarm time setting.
PQ-65DQ-745
Holding down + or changes the digits at high speed.
Turning the Alarm On and Off Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature.
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON or SNZ.
The light also turns on for the first four seconds that the alarm sounds. The alarm sound changes over four levels as it sounds.
Stopping the Alarm When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes. To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.
USING THE LIGHT Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.
Important! Overuse of the light can shorten battery life.