Contents

Casio EXH30 Camera User's Guide PDF

1 of 196
1 of 196

Summary of Content for Casio EXH30 Camera User's Guide PDF

1

E

To go to Getting the Most Out of Dynamic Photo click here!

Thank you for purchasing this CASIO product. Before using it, be sure to read the precautions contained in this Users Guide. Keep the Users Guide in a safe place for future reference. For the most up-to-date information about this product, visit the official EXILIM

Website at http://www.exilim.com/

Digital Camera

Users Guide

2

As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer.

Unpacking

Digital camera Rechargeable lithium ion battery (NP-130) Charger unit (BC-130L)

* The shape of the power cord plug varies according to country or geographic area.

Power cord Strap

USB cable AV cable CD-ROM Basic Reference

1

2

Attach strap here.

To attach the strap to the camera

3

The contents of this manual and the bundled Basic Reference are subject to change without notice.

The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc.

Any copying of the contents of this Users Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD. is forbidden under copyright laws.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost profits, or claims by third parties arising out of the use of Photo Transport, Dynamic Photo Manager, Virtual Painter 5 LE for CASIO, or YouTube Uploader for CASIO.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits caused by loss of memory contents due to malfunction, repair, or any other reason.

Note that the example screens and product illustrations shown in this Users Guide may differ somewhat from the screens and configuration of the actual camera.

LCD Panel The liquid crystal panel of the monitor screen uses high-precision technology that provides a pixel yield in excess of 99.99%. This means that some very small number of pixels may not light or may remain lit at all times. This is due to the characteristics of the liquid crystal panel, and does not indicate malfunction.

Read this first!

Take a few test shots Before shooting your final image, shoot a test shot to ensure that the camera is recording correctly.

4 Contents

Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Quick Start Basics 12 What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . 13 First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 To charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Enabling Power Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Eco Mode). . . 17

Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 18 Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 To turn off the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To delete specific files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Snapshot Tutorial 31 Selecting the Recording Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Specifying Control Panel Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 34 Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 37 Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . 39 Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . 42 Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 44 Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . 45 Using Face Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . (Face Detection) . . 46 Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .(EV Shift) . . 47 Changing the Control Panel Date/Time Style . . . . . . . . . . . . . . . . . . . . . . . . 48

5 Contents

Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Interpreting the Zoom Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . .(Single SR Zoom). . . 51

Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . (Slide Panorama) . . 52 Shooting without Disturbing Others . . . . . . . . . . . . . . . . . . . . (Silent Mode). . . 54

Recording Movie Images and Audio 55 To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Shooting a Snapshot while Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . 58 Recording Audio Only . . . . . . . . . . . . . . . . . . . . . . . . . . (Voice Recording) . . 58 To play back an audio recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Using BEST SHOT 60 What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Creating Your Own BEST SHOT Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Shooting ID Photographs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Shooting Images of Business Cards and Documents . . . . . . . . . . . . . . . . . . 65 Recording a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Isolating Moving Subjects . . . . . . . . . . . . . . . . . . . . . (Multi-motion Image) . . 67

Advanced Settings 68 Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 69 Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . . 69 Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS). . . 69 Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . . 70 Using Auto Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Auto Shutter) . . . 71 Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . .(Face Detection) . . . 74 Shooting with Continuous Auto Focus . . . . . . . . . . . . . . . . (Continuous AF). . . 74 Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake) . . . 74 Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . . 75 Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . . .(AF Assist Light) . . . 75 Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . .(Digital Zoom). . . 75 Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . . . 76 Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review). . . 76 Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help) . . . 76 Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory) . . . 77

Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 78 Shooting Snapshots of better Texture and Sharpness . .(Single SR Quality) . . . 78 Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . .(Single SR Zoom). . . 78 Specifying Snapshot Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . . 78 Specifying Snapshot Image Quality . . . . . . . . . . . . . . . (Quality (Snapshot)) . . . 79 Specifying Movie Image Quality . . . . . . . . . . . . . . . . . . . . .(Quality (Movie)) . . . 79 Recording Beautiful Images of People and Scenery . . . . . . . . . . . . (Effect) . . . 80

6 Contents

Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . . . 82 Controlling White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . . 82 Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 83 Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .(Metering) . . . 83 Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . . . 84 Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter) . . . 84 Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness) . . . 84 Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation) . . . 85 Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Contrast) . . . 85 Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity) . . . 85

Viewing Snapshots and Movies 86 Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Dividing Up a CS Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Displaying Images in the Calendar Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Viewing Snapshots and Movies on a TV Screen. . . . . . . . . . . . . . . . . . . . . . 92

Other Playback Functions (PLAY) 94 Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 94 Saving Music from Your Computer to Camera Memory . . . . . . . . . . . . . . . . . . . 95

Creating a Snapshot of Movie Frames . . . . . . . . . . . . . (MOTION PRINT) . . 96 Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . 97 Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . . 99 Using Red Eye Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Red Eye) . . 99 Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . 100 Adjusting the Brightness of an Existing Snapshot . . . . . . . . .(Brightness) . 101 Keystone Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Keystone) . 101 Using Color Correction to Correct the Color of an Old Photograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Correction) . 102 Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . 103 Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . 103 Editing the Date and Time of an Image . . . . . . . . . . . . . . . . . (Date/Time) . 104 Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . 104 Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . 105 Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming) . 105 Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Dubbing) . 106 To play snapshot audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 107

7 Contents

Dynamic Photo 108 To create a subject image to be inserted . . . . . . . . . . . . (Dynamic Photo) . 108 Extracting Text from an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Inserting a Subject into a Snapshot or Movie . . . . . . . . . (Dynamic Photo) . .111 To view a Dynamic Photo . . . . . . . . . . . . . . . . . . . . . . (Dynamic Photo File) . . 113

Converting a Dynamic Photo Still Image to a Movie . . . (Movie Converter) . 113

Printing 114 Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . 115 Using DPOF to Specify Images to be Printed and the Number of Copies. . 117

Using the Camera with a Computer 120 Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . 121 Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . . 128 Play back Dynamic Photo images on your EXILIM, a computer,

or on a mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Transforming Snapshots into Artistic Image . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . 131 User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 132 Transferring Images Automatically and Managing Them on Your Macintosh. . 135 Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . 136 User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Using an Eye-Fi Wireless SD Memory Card to Transfer Images . (Eye-Fi) . 136 Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Other Settings (Set Up) 141 Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . (Screen) . 141 Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . 141 Auto Image Orientation Detection and Rotation . . . . . . . . . .(Auto Rotate) . 142 Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 142 Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup) . 143 Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . 143 Creating an Image Storage Folder . . . . . . . . . . . . . . . . . . (Create Folder) . 144 Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 144 Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp) . 145 Setting the Cameras Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 145

8 Contents

Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 146 Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 146 Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . 147 Configuring Auto Power Settings . . . . . . . . . . . . . . . . . . (Auto Power Off) . 147 Configuring [r] and [p] Settings . . . . . . . . . . . . . . . . . . . (REC/PLAY) . 148 Disabling File Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . ( Disabled) . 148 Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . (USB) . 149 Selecting the Screen Aspect Ratio and Video Output System (Video Out) . 149 Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format) . 150 Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 150

Configuring Monitor Screen Settings 151 Turning Display Information On and Off . . . . . . . . . . . . . . . . . . . . . . (Info) . 151 Using the On-screen Histogram to Check Exposure . . . . . . . . . . . . . . . . . . 151 How to Use the Histogram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Appendix 153 Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

Computer System Requirements for Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Bundled CD-ROM) . 164 Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 When things dont go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Number of Snapshots/Movie Recording Time/ Voice Recording Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

9

1

The numbers in parentheses indicate the pages where each item is explained.

. Camera

. Charger Unit

General Guide

1Mode dial (pages 23, 31, 60)

2Zoom controller (pages 24, 48, 90, 91)

3Shutter button (page 23) 4Flash (page 37) 5[ON/OFF] (Power)

(page 21) 6Front lamp

(pages 45, 75) 7[ECO] button (page 17) 8Lens

9Microphone (pages 56, 106)

bkBack lamp (pages 21, 24, 37)

bl[r] (REC) button (pages 21, 23)

bm[0] (Movie) button (page 55)

bnStrap hole (page 2) boConnector cover bp[USB/AV] port

(pages 92, 115, 123, 133)

bq[MENU] button (page 68)

br[p] (PLAY) button (pages 21, 27)

bs[SET] button (page 33) btControl button

([8] [2] [4] [6]) (pages 28, 33, 37, 68, 151)

ckMonitor screen (pages 10, 151)

21

8

76345 9bk bobnbmbl

bqbrbsbtck

[ ]

[ ]

[ ]

[ ]

[SET]

bp

Back

clBattery/memory card slots (pages 15, 19, 161, 162) cmTripod hole

Use this hole when attaching to a tripod. cnSpeaker

clcmcn

Bottom

Front

3

1 2 1+7- Contacts 2[CHARGE] Lamp 3AC jack

10

The monitor screen uses various indicators, icons, and values to keep you informed of the cameras status. The sample screens in this section are intended to show you the locations of all the

indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.

. Snapshot Recording

. Shutter Button Half-pressed

Monitor Screen Contents

1Remaining snapshot memory capacity (page 176)

2Movie image quality (page 79) 3Self-timer (page 45) 4Recording mode (page 23) 5White balance setting (page 82) 6Remaining movie memory capacity

(page 55)

7Zoom/Single SR Quality indicator (page 50)

8Metering mode (page 83) 9Snapshot image size (page 34) bkSnapshot image quality (page 79) blFlash (page 37) bmFocus (page 39) bnAF Area (page 42) boISO sensitivity (page 44) bpSelf-timer (page 45) bqFace Detection/Make-up/Landscape

(pages 46, 80, 81) brExposure compensation (page 47) bsDate/time (page 48) btTimestamp indicator (page 145) ckFocus frame (pages 24, 42) clBattery level indicator (page 16) cmHistogram (page 151) cnAnti Shake (page 74) coAuto shutter (page 71) cpFocus mode (page 39)

1Recording mode (page 23) 2White balance setting (page 82) 3Zoom/Single SR Quality indicator

(page 50) 4Flash (page 37) 5ISO sensitivity (page 44) 6Aperture value 7Shutter speed 8Metering mode (page 83) 9Focus mode (page 39) bkAnti Shake (page 74)

NOTE If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not

correct, the setting will turn orange when you half-press the shutter button.

br

bl bm bn

bp bq

bo

cl

cm

cn

co

cp

bsbt

9bk43 51 76 8

ck

2

7

4

5

6

bk

1 2 3

9 8

11

. Movie Recording

. Snapshot Viewing

. Movie Playback

1Flash (page 37) 2Recording mode (page 55) 3White balance setting (page 82) 4Remaining movie memory capacity (page 55) 5Movie recording time (page 55) 6Exposure compensation (page 47) 7Battery level indicator (page 16) 8Histogram (page 151)

1File type 2Protect indicator (page 103) 3Folder name/file name (page 138) 4Snapshot image quality (page 79) 5Snapshot image size (page 34) 6ISO sensitivity (page 44) 7Aperture value 8Shutter speed 9Date/time (page 48) bkMetering mode (page 83) blWhite balance setting (page 100) bmFlash (page 37) bnRecording mode boBattery level indicator (page 16) bpHistogram (page 151) bqExposure compensation (page 47)

1File type 2Protect indicator (page 103) 3Folder name/file name (page 138) 4Movie recording time (page 86) 5Movie image quality (page 79) 6Date/time (page 48) 7Battery level indicator (page 16)

1 23

7 6

8

4 5

31

bp

bq

bo blbkbmbn

4

7

5

8 9

6

2

1

4 5

7

2 3

6

12 Quick Start Basics

Quick Start Basics What is a digital camera?

Delete

A digital camera stores images on a memory card, so you can record and delete images a countless number of times.

Play

Record

You can use the images you record in a variety of different ways.

Store images on your computer.

Print images. Attach images to e-mail.

13 Quick Start Basics

Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions.

What you can do with your CASIO camera

Simply select the sample scene you want and the camera sets up automatically. Then all you need to do is press the shutter button for perfect images.

Select Premium Auto recording and the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto delivers higher image quality than standard Auto.

See page 23 for more information.

See page 60 for more information.

Premium Auto

BEST SHOT

See page 108 for more information.

Advanced Dynamic Photo Extract people or objects out of images you shoot and insert them into another snapshot or movie (background). You can even insert a moving subject to create true Dynamic Photo images.

14 Quick Start Basics

Note that the battery of a newly purchased camera is not charged. Perform the steps under To charge the battery to bring the battery to a full charge. Your camera requires a special CASIO rechargeable lithium ion battery (NP-130)

for power. Never try to use any other type of battery.

1. Aligning the positive + and negative - terminals of the battery with those of the charger unit, load the battery into the charger unit.

2. Plug the charger unit into a household power outlet. About 240 minutes are required to reach full charge. The [CHARGE] lamp will go out when charging is complete. Unplug the power cord from the power outlet and then remove the battery from the charger.

First, charge the battery prior to use.

To charge the battery

Lamp Status Description

Lit Red Charging

Flashing Red Abnormal ambient temperature, charger problem, or battery problem (page 160)

Off Charging complete

[CHARGE] lamp

15 Quick Start Basics

Other Charging Precautions Use the special charger (BC-130L) to charge the special lithium ion battery (NP-

130). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.

A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it.

A battery discharges slightly even when it is not loaded in the camera. Because of this, it is recommended that you charge the battery immediately before you need to use it.

Charging the cameras battery may cause interference with TV and radio reception. If this happens, plug the charger into an outlet that is further away from the TV or radio.

Actual charging time depends on current battery capacity and charging conditions.

1. Open the battery cover. Slide the battery cover slider towards OPEN and then open it as indicated by the arrows in the illustration.

2. Load the battery. With the EXILIM logo on the battery facing downwards (in the direction of the lens), hold the stopper next to the battery in the direction indicated by the arrow as you slide the battery into the camera. Press the battery in until the stopper secures it in place.

To load the battery

EXILIM logo

Stopper

Front Back

Battery contacts

16 Quick Start Basics

3. Close the battery cover. Close the battery cover and then shift the slider towards LOCK. For information about how to replace the

battery, see page 161.

Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below.

indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. The level shown by the battery indicator may change when you switch between the

REC mode and PLAY mode. Leaving the camera for about 30 days with no power supplied while the battery is

dead will cause its date and time settings to be cleared. A message telling you to configure time and date settings will appear the next time you turn on the camera after restoring power. When this happens, configure date and time settings (page 145).

See page 180 for information about battery life and number of shots.

Battery Power Conservation Tips Entering the Eco mode enables low-power operation (page 17). When you do not need to use the flash, select ? (Flash Off) for the flash setting

(page 37). Enable the Auto Power Off and the Sleep features to protect against wasting

battery power when you forget to turn off the camera (pages 147, 147). Select Off for Continuous AF (page 74).

Remaining Power High Low

Battery Indicator * * *

Indicator Color Cyan * Amber * Red * Red

17 Quick Start Basics

Enabling power saving reduces the brightness of the monitor screen and switches other camera operations to low-power operation, which allows a charge to last longer and increase the number of images that can be shot between charges. The Eco Mode can be enabled only while Auto is selected as the recording mode (page 31).

1. Press [ECO]. This enters the Eco mode, which is indicated by e on the monitor screen. Each press of [ECO] toggles the Eco mode between on and off.

NOTE Changing the mode dial setting while the Eco mode is On will turn the Eco mode

Off automatically and change the recording mode to the current mode dial selection.

You can achieve even greater power savings by using the Eco mode in combination with Auto Power Off (page 147) and Sleep (page 147).

Enabling Power Saving (Eco Mode)

18 Quick Start Basics

The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.

IMPORTANT!

A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market. To change the display language from Japanese in this case, use the procedure under Specifying the Display Language (Language) (page 146). Note that a version of this manual in the language you select may not be included with a camera intended for the Japanese market.

Camera models sold in certain geographic areas may not support display language selection.

1. Press [ON/OFF] (Power) to turn on the camera.

2. Use [8], [2], [4], and [6] to select the language you want and then press [SET].

3. Use [8] and [2] to select a date style and then press [SET]. Example: July, 10, 2012 YY/MM/DD * 12/7/10 DD/MM/YY * 10/7/12 MM/DD/YY * 7/10/12

4. Set the date and the time. Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it. To switch between 12-hour and 24-hour format, press [0] (Movie).

5. After setting the date and time, use [4] and [6] to select Apply and then press [SET].

Configuring Basic Settings the First Time You Turn On the Camera

If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings. Display language: Page 146 Date and time: Page 145

[ ]

[ ]

[ ]

[ ]

[SET]

[ON/OFF] (Power)

[0] (Movie)

19 Quick Start Basics

NOTE Each country controls its local time offset and the use of summer time, and so they

are subject to change. Removing the battery from the camera too soon after configuring time and date

settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.

Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images and movies recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images and movies are saved to built-in memory. For information about memory card capacities, see page 176.

SD Memory Card SDHC Memory Card SDXC Memory Card

Use one of the above types of memory card.

1. Press [ON/OFF] (Power) to turn off the camera and then open the battery cover. Slide the battery cover slider towards OPEN and then open it as indicated by the arrows in the illustration.

2. Load a memory card. Positioning the memory card so its front is facing upwards (towards the monitor screen side of the camera), slide it into the card slot all the way in until you hear it click securely into place.

Preparing a Memory Card

Supported Memory Cards

To load a memory card

Front Back

Front

20 Quick Start Basics

3. Close the battery cover. Close the battery cover and then shift the slider towards LOCK. For information about how to replace the

memory card, see page 162.

IMPORTANT!

Never insert anything besides a supported memory card (page 19) into the memory card slot.

Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center.

You need to format a new memory card before using it for the first time.

1. Turn on the camera and press [MENU].

2. Select the Set Up tab, select Format and then press [6].

3. Use [8] and [2] to select Format and then press [SET].

IMPORTANT!

Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card.

Be sure to use the camera to format a memory card. Formatting a memory card on a computer and then using it in the camera can slow down data processing by the camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a computer can result in non-conformity with the SD format, causing problems with compatibility, operation, etc.

Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi Manager install files to your computer. Do this before formatting the card.

To format (initialize) a new memory card

21 Quick Start Basics

Take care to ensure that nothing is restricting or coming into contact with the lens as it extends. Holding the lens with your hand so it cannot extend creates the risk of malfunction.

Pressing [p] (PLAY) while in the REC mode switches to the PLAY mode. The lens retracts about 10 seconds after switching modes.

The Sleep function or Auto Power Off (pages 147, 147) will turn off power automatically if you do not perform any operation for a preset amount of time.

Press [ON/OFF] (Power). You can configure the camera so power does not turn on when you press [r]

(REC) or [p] (PLAY). You also can configure the camera to turn off when you press [r] (REC) or [p] (PLAY) (page 148).

Turning the Camera On and Off

To turn power on

To turn on power and enter the REC mode

Press [ON/OFF] (Power) or [r] (REC). The back lamp will light green

momentarily and the lens will extend out of the camera (page 23).

To turn on power and enter the PLAY mode

Press [p] (PLAY). The back lamp will light green

momentarily and an image currently stored in camera memory will appear on the monitor screen (page 27).

To turn off the camera

[ON/OFF] (Power)

Back lamp

[r] (REC) [p] (PLAY)

22 Quick Start Basics

Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot. Holding the camera still, carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases. This is especially important when available lighting is low, which slows down the shutter speed.

NOTE Take care that your fingers and the strap do not

cover any of the areas indicated in the illustration. To protect against accidentally dropping the

camera, attach the wrist strap and make sure it is around your fingers or wrist while you are operating the camera.

Never swing the camera around by its strap. The supplied strap is intended for use with this

camera only. Never use it for any other purpose.

IMPORTANT!

Take care to ensure that your fingers are not blocking or are not too close to the flash. Fingers can cause unwanted shadows when using the flash.

Holding the Camera Correctly

Horizontal Vertical

Hold the camera so the flash is above the lens.

Flash Front lamp

Lens

23 Quick Start Basics

You can select one of two auto recording modes (Auto or Premium Auto) according to your digital imaging needs.

1. Press [r] (REC) to turn on the camera. The camera will enter the REC mode.

2. Set the mode dial to t (Auto) or (Premium Auto) to select Auto recording mode (page 31).

To shoot a snapshot

Selecting an Auto Recording Mode

Auto This is the standard Auto recording mode. It provides faster operation than Premium Auto recording.

Premium Auto

With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto recording delivers higher image quality than standard Auto recording. Premium Auto recording takes longer to process image data

after it is shot than Auto recording. It also requires more power (and runs down the battery

quicker) than Auto.

R

Remaining Snapshot Memory Capacity (page 176)

Monitor screen Shutter button

[r] (REC)

Mode dial

Auto recording mode icon

24 Quick Start Basics

1. Point the camera at the subject. If you are using Premium Auto, text will appear in the lower right corner of the monitor screen describing the type of shot the camera has detected. You can zoom the image, if you want.

To shoot a snapshot

2. Half-press the shutter button to focus the image. When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.

When you half-press the shutter button, the camera automatically adjusts exposure and focuses on the subject it is currently pointed at. Mastering how much pressure is required for a half-press and a full-press of the shutter button is an important technique for good-looking images.

Appears when the camera detects it is stationary on a tripod.

w Wide Angle z Telephoto Zoom controller

Focus frame

Back lamp

Half-press Press lightly until the button stops.

Beep, beep (Image is in focus.)

25 Quick Start Basics

3. Continuing to keep the camera still, press the shutter button the rest of the way down. This records the snapshot.

. If the image does not focus... If the focus frame stays red and the back lamp is flashing green, it means that the image is not in focus (because the subject is too close, etc.). Re-point the camera at the subject and try to focus again.

. Shooting with Auto

If the subject is not in the center of the frame... Focus lock (page 41) is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen.

To track the movement of a moving subject Half-press the shutter button to follow and focus automatically on a moving subject. See Tracking (page 42) for more information.

Recording a Movie Press [0] (Movie) to start movie recording. Press [0] (Movie) again to stop movie recording. See page 55 for details.

Full-press

Snap (Image is recorded.)

[0] (Movie)

26 Quick Start Basics

. Shooting with Premium Auto In addition to shutter speed, aperture, and ISO sensitivity, the camera

automatically executes the following operation as required when shooting with Premium Auto. Auto Focus is normally performed until you half-press the shutter button. Intelligent AF (Page 42) Face Detection (Page 46) Make-up/Landscape (Pages 80, 81)

Shooting with Premium Auto can cause vibration and noise to occur due to lens operation. This does not indicate malfunction.

When Shooting with Premium Auto, the message Processing Premium Auto. Please wait... may appear on the monitor screen. If you feel the camera is taking too long to process data, try shooting with standard Auto instead.

In some cases, Premium Auto may not be able to interpret the shooting environment correctly. If this happens, shoot with standard Auto.

27 Quick Start Basics

Use the following procedure to view snapshots on the cameras monitor screen. For information about how to play back movies, see page 86.

1. Press [p] (PLAY) to enter the PLAY mode. This will display one of the snapshots

currently stored in memory. Information about the displayed

snapshot also is included (page 11). You also can clear the information to

view only the snapshot (page 151). You can zoom in on the image by

sliding the zoom controller towards z (page 90). If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.

2. Use [4] and [6] to scroll between images. Holding down either button scrolls at high speed.

NOTE Half-pressing the shutter button while in the PLAY mode or while a menu screen is

displayed will switch directly to the REC mode.

Viewing Snapshots

[p] (PLAY)

[6] [6]

[4] [4]

28 Quick Start Basics

If memory becomes full, you can delete snapshots and movies you no longer need to free up storage and record more images.

IMPORTANT!

Remember that a file (image) delete operation cannot be undone. Deleting an audio snapshot (page 106) deletes both the snapshot and the audio

file. The delete menu will not appear if you press [2] ( ) while On is selected for

the cameras Disabled setting (page 148). You can delete files only while Off is selected for Disabled.

1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).

2. Use [4] and [6] to scroll through the files until the one you want to delete is displayed.

3. Use [8] and [2] to select Delete and then press [SET]. To delete other files, repeat steps 2 and 3. To exit the delete operation, press [MENU].

1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).

2. Use [8] and [2] to select Delete Files and then press [SET]. This displays a file selection screen.

3. Use [8], [2], [4], and [6] to move the selection boundary to the file you want to delete, and then press [SET]. This will select the check box of the currently selected file.

4. Repeat step 3 to select other files, if you want. After you are finished selecting files, press [MENU].

5. Use [8] and [2] to select Yes and then press [SET]. This deletes the files you selected. To cancel the delete operation, select No in step 5 and then press [SET].

Deleting Snapshots and Movies

To delete a single file

To delete specific files

29 Quick Start Basics

1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).

2. Use [8] and [2] to select Delete All Files and then press [SET].

3. Use [8] and [2] to select Yes and then press [SET] to delete all files. This will cause the message There are no files to appear.

Operation Never open the battery cover while the back lamp is flashing green. Doing so can

result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc.

If unwanted light is shining directly onto the lens, shade the lens with your hand when shooting an image.

Monitor Screen when Shooting Snapshots Subject brightness conditions can cause monitor screen response to slow and can

cause digital noise in the monitor screen image. The image that appears on the monitor screen is for image composition. The actual

image will be recorded at the quality set for the image quality setting (page 79).

Shooting Indoors under Fluorescent Lighting Minute flickering of fluorescent lighting can affect the brightness or color of an

image.

To delete all files

Snapshot Shooting Precautions

30 Quick Start Basics

Any of the following can make proper focus impossible. Solid color wall or other very low contrast subject Strongly back lit subject Very shiny subject Blinds or other subject with a repeating horizontal pattern Multiple subjects at varying distances from the camera Subject in a dark location Subject that is too far away for light from the AF assist lamp to reach Camera movement while shooting Fast-moving subject Subjects outside the focus range of the camera

If you cannot focus properly, try using focus lock (page 41) or Manual Focus (page 39).

Auto Focus Restrictions

31 Snapshot Tutorial

Snapshot Tutorial

Your camera has a variety of different recording modes. Before recording an image, rotate the mode dial to select the recording mode that suits the type of image you are trying to record.

Selecting the Recording Mode

Silent

The Silent mode disables flash, mutes camera operation tones, and changes other settings to help ensure that shooting does not bother others around you (page 54).

Slide Panorama

Simply move the camera as you record and it shoots a series of images that you can stitch together on the monitor screen to produce a sweeping panorama (page 52).

BEST SHOT

Simply select one of a collection of built-in sample scenes and the camera sets up automatically for beautiful images every time (page 60).

Premium Auto

With Premium Auto recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto recording delivers higher image quality than standard Auto recording (page 23).

Auto

Standard Auto recording mode. This is the mode you normally should use (page 23).

A A (Aperture Priority) mode

In this mode, you select the aperture and other settings are adjusted accordingly. 1 Press [SET] to open the Control Panel. 2 Use [8] and [2] to select the third Control Panel

option from the bottom (aperture). 3 Use [4] and [6] to change the aperture setting.

You also can select the EV shift setting located under the aperture setting and then specify an exposure value (EV shift), if you want.

Mode dial

m

s

b

t

Aperture value

32 Snapshot Tutorial

IMPORTANT!

You may not be able to achieve the brightness you want when shooting an image that is very dark or very bright. If this happens, use the M mode to adjust the aperture or shutter speed manually.

In the S mode, ISO sensitivity (page 44) always operates according to its AUTO setting. The ISO sensitivity setting cannot be changed while in the S mode.

While A, S, or M is selected for the recording mode, the flash will not fire if > (Auto Flash) or (Red Eye Reduction) is selected as the flash mode. If you want the flash to fire, select < (Flash On) as the flash mode.

The displayed ISO sensitivity, shutter speed or aperture value will turn orange when you half-press the shutter button if the image is overexposed or underexposed.

S S (Shutter Speed Priority) mode

In this mode, you select the shutter speed and other settings are adjusted accordingly. 1 Press [SET] to open the Control Panel. 2 Use [8] and [2] to select the third Control Panel

option from the bottom (shutter speed). 3 Use [4] and [6] to change the shutter speed setting.

You also can select the EV shift setting located under the shutter speed setting and then specify an exposure value (EV shift), if you want.

M M (Manual Exposure) mode

This mode gives you total control over aperture and shutter speed settings. 1 Press [SET] to open the Control Panel. 2 Use [8] and [2] to select the third Control Panel

item from the bottom (aperture). 3 Use [4] and [6] to change the aperture setting. 4 Use [8] and [2] to select the second Control Panel

item from the bottom (shutter speed). 5 Use [4] and [6] to change the shutter speed

setting.

Shutter speed

Aperture value

Shutter speed

33 Snapshot Tutorial

The Control Panel can be used to configure camera settings.

1. In the REC mode, press [SET]. This will select one of the Control Panel icons and display its settings.

2. Use [8] and [2] to select the setting you want to change.

* Snapshot image quality cannot be changed using the Control Panel.

3. Use [4] and [6] to change the setting.

4. If you want to configure another setting, repeat steps 2 and 3.

5. After all of the settings are the way you want, press [SET]. This will apply the settings and return to the REC mode.

NOTE You also can configure settings other than those listed above (page 68). The Control Panel cannot be displayed when certain BEST SHOT scenes are

being used.

Using the Control Panel

[SET]

Control PanelAvailable settings[8] [2] [4] [6] 1

9

5

3 4

7 8

2

6

1Image size/Quality* (pages 34, 79) 2Flash (page 37) 3Focus (page 39) 4AF Area (page 42) 5ISO sensitivity (page 44)

6Self-timer (page 45) 7Face Detection/Make-up/Landscape

(pages 46, 80, 81) 8EV shift (page 47) 9Date/Time (page 48)

34 Snapshot Tutorial

You can use the following procedure to specify the eight items you want on the Control Panel when using the Auto recording mode.

1. In the REC mode, press [SET].

2. Press [MENU]. This will display a menu of Control Panel items, with the items currently

selected for display shown in green.

3. Use [8], [2], [4], and [6] to select an item you want on the Control Panel and then press [SET]. This will cause the lamp next to the item to light.

4. Repeat the above step to select eight items for the Control Panel. After you select the eighth item, the camera switches to the REC mode and displays the Control Panel. To exit the item select operation, press [MENU].

NOTE The Date/Time item at the bottom of the Control Panel is fixed and cannot be

changed. The screen shots in this manual show the initial default Control Panel items. To return the Control Panel items to their initial defaults, reset the camera (page

150).

. Pixels A digital camera image is a collection of small dots called pixels. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer pixels when printing an image (L size) through a print service, attaching an image to e-mail, when viewing the image on a computer, etc.

Specifying Control Panel Items

Changing the Image Size (Size)

Pixel

35 Snapshot Tutorial

. About image sizes The size of an image indicates how many pixels it contains, and is expressed as horizontal pixelsxvertical pixels.

Image Size Selection Tips Note that larger images have more pixels, so they take up more memory space.

For information about image size, image quality, and number of images that can be stored, see page 176.

For information about movie image size, see page 79. For information about resizing existing snapshots, see page 105.

10M (3648x2736) size image = Approximately 10 million pixels

* Unit: pixels

VGA (640x480) size image = Approximately 300,000 pixels

Large Number of Pixels

More detail, but takes up more memory. Best when you plan to print large-size prints (such as A3 size).

Small Number of Pixels

Less detail, but takes up less memory. Best when you want to send images by e-mail, etc.

3648*

2 7

3 6 *

640* 4

8 0 *

36 Snapshot Tutorial

. To select the image size

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the top Control Panel option (Image Size).

3. Use [4] and [6] to select an image size and then press [SET].

The initial factory default image size setting is 16M. Selecting 3:2 records images with an aspect ratio of 3:2, which matches the

standard aspect ratio of print paper. The letters HDTV stand for High Definition Television. An HDTV screen has an

aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of television screens of the past. Your camera can record images that are compatible with the aspect ratio an HDTV screen.

You should regard the print paper sizes suggested here as guidelines only (200 dpi print resolution).

Image Size (Pixels)

Suggested Print Size and Application

Description

16M (4608x3456) Poster Print

Good detail for better clarity even for images cropped (page 105) from the original

3:2 (4608x3072) Poster Print

16:9 (4608x2592) HDTV

10M (3648x2736) Poster Print

Good detail 5M (2560x1920) A3 Print

3M (2048x1536) 3.5"x5" Print Best when preserving memory capacity is

relatively more important than image quality.

VGA (640x480) E Mail

Image files are smaller, which is better when attaching images to e-mail. However, images are relatively coarser.

37 Snapshot Tutorial

1. In the REC mode, press [2] ( ) once.

2. Use [4] and [6] to select the flash setting you want and then press [SET]. You can select the flash mode by pressing

[2] ( ) in either of the following cases. When Flash is not shown on the

Control Panel (page 34) After [8] (DISP) is pressed to clear the information from the monitor screen

(page 151)

3. Press the shutter button to shoot.

For information about Flash Range, see page 179.

Using Flash (Flash)

Auto Flash Flash fires automatically in accordance with exposure (amount of light and brightness) conditions.

Flash Off Flash does not fire.

Flash On Flash always fires. This setting can be used to brighten a subject that normally comes out dark due to daylight or backlight (daylight synchro flash).

Red Eye Reduction

Flash fires automatically. This type of flash can be used to reduce the chance of redness in the subjects eyes.

Back lamp Flashes orange while the flash is charging to indicate that image recording is disabled. You will not be able to take another flash snapshot until the lamp

stops flashing orange, which indicates that charging is complete.

< indicates the flash will fire.

Flash

[2] ( )

>

?

<

A

38 Snapshot Tutorial

NOTE Take care so your fingers and the strap do not block the flash. The desired effect may not be obtained when the subject is too far away or too

close. Flash charging time (page 179) depends on operating conditions (battery

condition, ambient temperature, etc.) Shooting with flash turned off when lighting is dim results in a slow shutter speed,

which can cause image blur due to camera movement. Under such conditions, secure the camera with a tripod, etc.

With red eye reduction, the flash is fired automatically in accordance with exposure. It does not fire in areas where lighting is bright.

The presence of outdoor sunlight, fluorescent lighting, or some other light source can cause abnormal image colors.

Select ? (Flash Off) for the flash setting when shooting in areas where flash photograph is prohibited.

While A, S, or M is selected for the recording mode, the flash will not fire if > (Auto Flash) or (Red Eye Reduction) is selected as the flash mode. If you want the flash to fire, select < (Flash On) as the flash mode.

Red-eye Reduction Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the image to close, which reduces the chance of red eye. This function also performs a process that corrects for red-eye after the image is recorded. Note the following important points when using red-eye reduction. Red-eye reduction does not work unless the people in the image are looking

directly at the camera (flash). Red-eye reduction may not work very well if the subjects are located far away from

the camera.

Other Useful Flash Features Changing the flash intensity (page 85)

39 Snapshot Tutorial

You can select a focus mode setting.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the third Control Panel option from the top (Focus).

3. Use [4] and [6] to select the setting you want and then press [SET].

*1 The focus range is the distance from the lens surface. *2 The minimum changes along with the optical zoom setting.

Selecting a Focus Mode (Focus)

Settings Type of Shot

Focus Mode Approximate Focus Range*1

Snapshot Movies Snapshot Movies

Q Auto Focus

General recording Automatic

Automatic

Approximately 5 cm to 9 (infinity) (2.0" to 9) (Wide Angle)

Macro Close ups Automatic

Approximately 1 cm to 50 cm (0.4" to 19.7") (Fifth step zoom from the Widest Angle setting)

Super Macro

Close ups Automatic Approximately 1 cm to 50 cm (0.4" to 19.7")

) Infinity

Scenery and other distant subjects

Fixed Infinity

W Manual Focus

When you want to focus manually

Manual Approximately 5 cm to 9 (infinity)*2 (2.0" to 9) (Wide Angle)

40 Snapshot Tutorial

Super Macro Super Macro fixes optical zoom at a position that allows you to shoot from the closest distance to the subject. The result is closer and larger subject images.

NOTE Zoom is fixed while Super Macro is selected, so no zoom operation is performed

when you slide the zoom controller.

To focus with manual focus

1. On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary.

2. Watching the image on the monitor screen use [4] and [6] to adjust focus. At this time the image that is within the boundary will

enlarge and fill the monitor screen, which aids in focusing. If you do not perform any operation for two seconds while the enlarged image is displayed, the screen in step 1 will re-appear.

NOTE An Auto Macro feature detects how far the subject is from the lens and

automatically selects either Macro Focus or Auto Focus accordingly. Use of the flash together with Macro Focus can cause the light of the flash to

become blocked, which may result in unwanted lens shadows in your image. Whenever you perform an optical zoom operation while shooting with Auto Focus,

Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell you the focus range, as shown below. Example: oo cm to 9 * oo is the actual focusing range value.

Yellow boundary

41 Snapshot Tutorial

Using Focus Lock Focus lock is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. To use focus lock, select Spot for the Auto Focus

area (page 42).

1. Align the monitor screens focus frame with the subject you want to focus on and then half- press the shutter button.

2. Keeping the shutter button half-pressed (which maintains the focus setting), move the camera to compose the image.

3. When you are ready to shoot the image, press the shutter button the rest of the way down.

NOTE Focus lock also locks exposure (AE).

Subject to be focused on

Focus frame

42 Snapshot Tutorial

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fourth Control Panel option from the top (AF Area).

3. Use [4] and [6] to select the setting you want and then press [SET].

4. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically.

Specifying the Auto Focus Area (AF Area)

Intelligent The camera automatically determines the focus point on the screen and focuses there (intelligent AF). Face detection (page 46) operates automatically.

Spot This mode takes readings of a small area in the center of the image. This setting works well with focus lock (page 41).

Multi

When you half-press the shutter button while this setting selected, the camera will select the optimum Auto Focus area from among nine possible areas. The focus frame of the area where the camera focuses will be displayed in green.

Tracking Half-pressing the shutter button focuses on the subject and causes the focus frame to track the movement of the subject.

43 Snapshot Tutorial

5. Press the shutter button the rest of the way down.

IMPORTANT!

Tracking cannot be selected for the Auto Focus area while you are using Auto Shutter (page 71).

Selecting Tracking can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction.

Spot or Tracking

Multi Focus frame

Focus frame

Intelligent

Focus frame

44 Snapshot Tutorial

ISO sensitivity is a measure of sensitivity to light.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fifth Control Panel option from the top (ISO Sensitivity).

3. Use [4] and [6] to select the setting you want and then press [SET].

AUTO ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting.

Higher ISO sensitivity values tend to result in digital noise in images.

Specifying ISO Sensitivity (ISO)

AUTO Adjusts sensitivity automatically according to conditions

ISO 80 Lower sensitivity

Higher sensitivity

Slow shutter speed

Fast shutter speed (Set for shooting in dimly lit areas.)

Less noise

Some coarseness (increased digital noise)

ISO 100

ISO 200

ISO 400

ISO 800

ISO 1600

ISO 3200

45 Snapshot Tutorial

With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the sixth Control Panel option from the top (Self-timer).

3. Use [4] and [6] to select the setting you want and then press [SET].

The front lamp flashes while the Self-timer countdown is in progress.

You can interrupt an ongoing Self-timer countdown by pressing [SET].

NOTE The Self-timer cannot be used together with the following features.

CS (4fps, 10fps), some BEST SHOT scenes The Triple Self-timer cannot be used together with the following features.

Auto Shutter, CS, Movie, Make-up Mode, Landscape Mode, some BEST SHOT scenes

Using the Self-timer (Self-timer)

10sec Self-timer 10-second Self-timer

2sec Self-timer

2-second Self-timer When shooting under conditions that slow down the shutter

speed, you can use this setting to prevent image blur due to camera movement.

X3 Self-timer (Triple Self-timer)

Shoots three images: one image 10 seconds after the shutter button is pressed, and the next two images as soon as the camera is ready after shooting the previous image. How long it takes for the camera to get ready to shoot depends on the image size and quality settings, whether or not a memory card is loaded in the camera, and the flash charge condition.

Self-timer Off Turns off the Self-timer.

Front lamp

46 Snapshot Tutorial

When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the third Control Panel option from the bottom (Face Detection).

3. Use [4] and [6] to select G Face Detection: On and then press [SET].

4. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one.

5. Half-press the shutter button. The camera will focus and the frames around the faces it focuses on will turn green.

6. Press the shutter button the rest of the way down.

IMPORTANT!

The camera performs center focus if it cannot detect a face. The only focus mode available while face detection is enabled is Auto Focus (AF). Face detection may take a bit longer when you hold the camera sideways. Detection of the following types of faces is not supported.

Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade A profile or a face that is at an angle A face that is very far away and small, or very close and large A face in an area that is very dark The face of a pet or some other non-human subject

Face detection cannot be used in combination with any of the following features. Some BEST SHOT scenes Movie Recording

The AF area setting (page 42) is ignored while face detection is enabled.

Using Face Detection (Face Detection)

47 Snapshot Tutorial

You can manually adjust an images exposure value (EV value) before shooting it. Exposure Compensation Range: 2.0EV to +2.0EV Unit: 1/3EV

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the second Control Panel option from the bottom (EV Shift).

3. Use [4] and [6] to adjust the exposure compensation value.

To cancel exposure compensation, change the EV value to 0.0.

4. Press [SET]. This applies the exposure compensation value. The exposure compensation value you set remains in effect until you change it or turn off the camera (which causes it to revert to 0.0).

NOTE When shooting under very dark or very bright conditions, you may not be able to

obtain satisfactory results even after performing exposure compensation.

Correcting Image Brightness (EV Shift)

[6]: Increases the EV value. A higher EV value is best for light-colored subjects and backlit subjects.

[4]:Decreases the EV value. A lower EV value is best for dark-color subjects and for shooting outdoors on a clear day.

Exposure compensation value

48 Snapshot Tutorial

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time.

NOTE You can select either of two display style (page 146) for the date: Month/Day or

Day/Month. The time is displayed using 24-hour format.

Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting and the digital zoom on/off settings.

Changing the Control Panel Date/Time Style

Shooting with Zoom

Optical zoom Changes the lens focal distance.

HD Zoom Allows greater zoom capabilities by cutting out a portion of the original image and enlarging it.

Single SR Zoom Applies super resolution technology to suppress image deterioration.

Digital zoom Digitally processes the center of the image to enlarge it.

49 Snapshot Tutorial

1. In the REC mode, slide the zoom controller to zoom.

2. Press the shutter button to shoot the image.

IMPORTANT!

Digital zoom, HD zoom, and Single SR zoom are disabled while time stamping (page 145) is turned on.

NOTE Use of a tripod is recommended to protect against image blur due to camera

movement when shooting with telephoto. Performing a zoom operation changes the lens aperture.

w (Wide Angle) : Reduces the size of the subject and broadens the range. z (Telephoto) : Enlarges the subject and narrows the range.

w Wide Angle z Telephoto Zoom controller

50 Snapshot Tutorial

During a zoom operation, a zoom bar appears on the monitor screen to show the current zoom setting.

. Zoom Icon The appearance of the zoom icon on the monitor screen depends on the zoom factor.

Interpreting the Zoom Bar

Optical zoom Not displayed

HD Zoom Not displayed

Single SR Zoom

Digital zoom

Range where image deterioration is suppressed. (optical zoom, HD Zoom, Single SR Zoom)

1X 75.0X to 199.3X Zoom pointer (Indicates current zoom.)

Point from which image deteriorates This point can be anywhere from 18.8X to 134.8X when

Single SR Zoom is enabled, or 12.5X to 90.0X when it is disabled.

Optical zoom limit point 12.5X optical zoom point

Deteriorated image range (digital zoom)

51 Snapshot Tutorial

. Zoom Factor The digital zoom factor depends on the image size (page 34) and on whether Single SR Zoom is enabled or disabled.

Super resolution technology makes it possible to expand the zoom range in which image deterioration is minimized. For information about the effective zoom factor ranges in which Single SR Zoom is effective, see page 51.

1. In the REC mode, press [MENU].

2. Use [4] and [6] to select the Quality tab.

3. Use [8] and [2] to select Single SR Zoom and then press [6].

4. Use [8] and [2] to select On and then press [SET].

NOTE Single SR Zoom is effective when you want to capture delicate textures. Single SR Zoom does not work during movie recording. The following functions are disabled when shooting with Single SR Zoom.

Continuous Shutter, Triple Self-timer, Make-up Mode, some BEST SHOT scenes

Image size

Maximum zoom factor where image deterioration can be suppressed Total maximum

zoom factorSingle SR Zoom: Off

Single SR Zoom: On

16M 12.5X 18.8X 75.0X

3:2 12.5X 18.8X 75.0X

16:9 12.5X 18.8X 75.0X

10M 15.8X 23.6X 94.6X

5M 22.5X 33.8X 134.8X

3M 28.1X 42.1X 168.4X

VGA 90.0X 134.8X 199.3X

Zooming with Super Resolution (Single SR Zoom)

52 Snapshot Tutorial

With Slide Panorama, you move the camera to compose and record multiple images, which are then combined to a panorama. This feature lets you shoot a panorama of up to 240 degrees, which is dramatically greater than the physical capabilities of the lens. The final panorama image can be one of the two sizes shown below.

Slide Direction is Right or Left: 5120x720 pixels Slide Direction is Up or Down: 1280x4320 pixels

Zoom operations are not supporting during Slide Panorama shooting. The zoom setting is fixed at full wide angle.

You can use Slide Panorama to shoot a horizontal image up to approximately 240 degrees and a vertical image up to approximately 180 degrees.

If you shoot a horizontal Slide Panorama image that is less than 240 degrees, the image size will become 60, 120 or 180 degrees.

1. In the REC mode, set the mode dial to s (Slide Panorama).

2. Press [SET] and then use [8] and [2] to select the top Control Panel option (Slide Direction).

3. Use [4] and [6] to select the direction you are planning to move the camera while shooting, and then press [SET]. You can select one of four directions: Right, Left, Up, or Down.

4. Point the camera at the start of the panorama and half-press the shutter button to allow the camera to focus automatically.

5. Press the shutter button the rest of the way down and a slide cursor will appear on the monitor screen. Slowly move the camera in the direction indicated by the arrow on the screen until the slide cursor reaches the other end of its movement range (i.e. all the way to the right when moving the camera to the right). The camera will start composing the panorama image

internally when the slide cursor reached the other end of the movement range.

Image composing also will start automatically if you stop moving the camera during panorama shooting. After you stop moving the camera, the message Busy... Please wait... appears as the camera processes the image. Wait until this message disappears before using the camera. Image shooting is disabled while the message is displayed.

Shooting a Panorama Image (Slide Panorama)

Slide cursor

53 Snapshot Tutorial

NOTE The following conditions are not compatible with Slide Panorama shooting.

Subject whose brightness is very different from that of its surroundings due to artificial light, sunlight, etc.

Rivers, waves, waterfalls, or other subject with constantly changing patterns Sky, beach, or other subject with continuous patterns Camera too close to the main subject Moving subject

Slide Panorama may stop part way through in the following cases. Subject or camera movement Camera movement that is too fast or too slow

Shooting a Slide Panorama image after half-pressing the shutter button to perform Auto Focus may not produce the desired results if there are considerable differences in the brightness, color, and/or focus of the individual images. If this happens, try changing the focus position by focusing on a different subject, etc.

Since a Slide Panorama image is created by joining multiple images together, there may be some roughness at the point where two images are joined.

Shooting under a flickering light source (such as fluorescent lighting) may result in uneven brightness and/or coloring in the final Slide Panorama image.

Shooting in dark surroundings may result in a blurred image or may make Slide Panorama shooting impossible.

Slowly move the camera at a constant speed in the same direction as the arrow that appears on the monitor screen.

When moving the camera, try to keep the arrow on the monitor screen as straight as possible.

The exposure and white balance when shooting Slide Panorama images are fixed at the levels measured when you half-press the shutter button at the beginning of the operation.

An error message will appear if the camera is unable to successfully record a series of images.

If you shoot a moving subject, the camera may not be able to compose the panorama image properly.

With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off).

54 Snapshot Tutorial

The Silent mode automatically disables flash, mutes operation tones, and configures other settings to avoid disturbing others around you. It comes in handy when shooting in a museum or other areas where flash photograph is prohibited.

1. Set the mode dial to m (Silent). This enters the Silent mode, which is indicated by m (Silent) on the monitor screen. The following shows the camera setup in the Silent mode.

As shown in the example to the right, Flash and Self-timer are not included in the control panel. This means that these settings cannot be changed from the Control Panel.

See the following for details. Flash (page 37) AF Assist Lamp (page 75) Self-timer (page 45) Sounds (page 142) Screen (page 141)

Shooting without Disturbing Others (Silent Mode)

Flash Off

AF Assist Lamp Off

Self-timer Off

Sounds Off

Screen 1 to 0

55 Recording Movie Images and Audio

Recording Movie Images and Audio

1. Configure the quality setting for the movie (page 79). The length of the movie you can record will depend on the quality setting you select.

2. In the REC mode, point the camera at the subject and then press [0] (Movie). This will start recording and display Y on the monitor screen. Movie recording includes monaural audio.

3. Press [0] (Movie) again to stop recording. Each movie can be up to 29 minutes

long. Movie recording stops automatically after 29 minutes of recording. Movie recording also will stop automatically if memory becomes full before you stop movie recording by pressing [0] (Movie).

Shooting with BEST SHOT With BEST SHOT (page 60), you can select the sample scene that matches the type of movie you are trying to shoot and the camera will change its setup accordingly, for beautiful movies every time. Selecting the BEST SHOT scene named Night Scene, for example, will configure the camera so night scenes appear clearer and brighter.

Minimizing the Effects of Camera Movement during Movie Recording You can configure the camera to minimize the effects of camera movement during movie recording (page 74). Note, however, that this does not prevent image blur due to subject movement and it makes the field of view narrower.

To record a movie

Recording time

Remaining recording time (page 177)

[0] (Movie)

B

56 Recording Movie Images and Audio

NOTE Spending a long time using movie recording will cause the camera to become

slightly warm to the touch. This is normal and does not indicate malfunction. The camera also records audio. Note the following points

when shooting a movie. Take care that the microphone is not blocked by your

fingers, etc. Good recording results are not possible when the

camera is too far away from what you are trying to record.

Operating camera buttons while shooting can cause button noise to be picked up in the audio.

Shooting a very bright subject can cause a vertical band or a pink cast on the monitor screen image. This does not indicate malfunction.

When using the cameras built-in memory or certain types of memory cards, it can take too much time to record data, which can result in breaks in the image and/or audio. This condition is indicated by and Y flashing on the monitor screen. To avoid loss of movie frames, use of a memory card with a maximum transfer speed of at least 10MB per second is recommended (page 163).

The effects of camera movement in an image become more pronounced when you shoot close up or with a large zoom factor. Because of this, use of a tripod is recommended under these conditions.

Movies are always recorded with the t (Auto) REC mode, regardless of the mode dials A, S, or M setting.

Microphone

57 Recording Movie Images and Audio

With this feature, the camera prerecords up to four seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it.

. To set up the camera to shoot with Prerecord Movie

1. In the REC mode, set the mode dial to b (BEST SHOT).

2. Press [SET].

3. Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).

4. Use [8], [2], [4], and [6] to select the Prerecord (Movie) scene and then press [SET]. This causes to appear on the monitor screen.

. To shoot a Prerecord Movie

1. Point the camera at the subject and then half-press the shutter button to focus with Auto Focus. Once proper focus is achieved, release the shutter button.

2. Press [0] (Movie). This will save four seconds of action prerecorded in the buffer and start real-time recording.

3. Press [0] (Movie) again to stop recording. To turn off Prerecord Movie recording, set the mode dial to t (Auto).

NOTE While the camera is set up for shooting with Prerecord Movie, pressing the shutter

button will not shoot a snapshot unless movie recording is in progress. You can shoot still images while realtime movie recording is in progress.

Using Prerecord Movie

[0] (Movie)

Movie

Recording start 4-second prerecorded part (from the buffer)

[0] (Movie)

Recording end

58 Recording Movie Images and Audio

1. While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded.

NOTE You can use [2] ( ) while shooting a movie to change the flash mode setting. Movie recording is interrupted for a few seconds at the point where a snapshot is

recorded. During movie recording, shooting a snapshot with any of the following is not

possible. Premium Auto A, S, or M mode (dial-selected recording mode) Some BEST SHOT scenes

Voice Recording lets you record audio only, without a snapshot or movie. For information about Voice Recording capacities, see page 177.

1. In the REC mode, set the mode dial to b (BEST SHOT).

2. Press [SET].

3. Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).

4. Use [8], [2], [4], and [6] to select the Voice Recording scene and then press [SET]. This causes ` to appear on the monitor screen.

5. Press the shutter button to start recording. The back lamp flashes green while recording is in

progress. Pressing [SET] during recording will insert a

marker into the recording. During playback, you will be able to jump to the markers in the recording.

6. Press the shutter button again to stop audio recording. To create another audio recording file, repeat

steps 5 and 6. To turn off Voice Recording, set the mode dial to t (Auto).

Shooting a Snapshot while Shooting a Movie

Recording Audio Only (Voice Recording)

Recording time

Remaining recording time

59 Recording Movie Images and Audio

NOTE You can use [8] (DISP) during audio recording to toggle the monitor screen on

and off. When monitor screen contents are turned off, selecting the Voice Recording

scene will cause the monitor screen to turn off immediately (page 151).

About audio data Audio files can be played back on a computer with Windows Media Player or

QuickTime. Audio Data: WAVE/IMA-ADPCM (WAV extension)

1. In the PLAY mode, use [4] and [6] to display the Voice Recording file you want to play. ` is displayed in place of an image for a Voice Recording file.

2. Press [SET] to start playback.

Voice Recording Playback Controls

NOTE See page 28 for information about deleting a voice recording file.

To play back an audio recording

Fast forward/fast reverse [4] [6]

Play/pause [SET]

Jump to marker While playback is paused, press [4] or [6] to jump to the next marker and then press [SET] to resume playback.

Volume adjustment Press [2] and then press [8] [2]

Monitor screen on/off [8] (DISP)

Playback end [MENU]

60 Using BEST SHOT

Using BEST SHOT

BEST SHOT provides you with a collection of sample scenes that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings.

1. In the REC mode, set the mode dial to b (BEST SHOT).

2. Press [SET].

3. Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33). This will display a menu of BEST SHOT scenes.

4. Use [8], [2], [4], and [6] to move the boundary to the scene you want to select. The scene menu has multiple pages. Use [8] and

[2] to scroll between menu pages. You can access information about the currently

selected scene. See page 61 for details. To return to normal snapshot recording, set the

mode dial to t (Auto).

What is BEST SHOT?

Some Sample Scenes

Portrait Scenery Night Scene Night Scene Portrait

To shoot an image with BEST SHOT

Currently selected scene (with boundary)

Scene number

Scene name

Mode dial

61 Using BEST SHOT

5. Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. The settings of the scene you selected remain in effect until you select a

different scene. To select a different BEST SHOT scene, repeat the above procedure from step

1.

6. Press the shutter button (if you are shooting a snapshot) or [0] (Movie) (if you are shooting a movie).

NOTE The BEST SHOT YouTube scene sets up the camera for recording movies that are

optimized for uploading to YouTube. Movies recorded with the YouTube scene are stored in a special folder to make them easy to locate for uploading (page 139).

. Using Scene Information Screen To find out more about a scene, select it with the boundary on the scene selection screen, and then slide the zoom controller in either direction. To return to the scene menu, slide the zoom controller

again. To scroll between scenes, use [4] and [6]. To configure the camera with the settings for the currently

selected scene, press [SET].

62 Using BEST SHOT

. BEST SHOT Precautions Some BEST SHOT scenes cannot be used while recording a movie. The following BEST SHOT scenes cannot be used while shooting a snapshot.

Prerecord (Movie), For YouTube The Voice Recording scene cannot be used while shooting a snapshot or recording

a movie. Some scenes like Night Scene and Fireworks results in a slow shutter speed

setting. Since a slow shutter speed increases the chance of digital noise in the image, the camera automatically performs a digital noise reduction process when either of these scenes is selected. This means that it will take a bit longer for the image to be saved which is indicated by the back lamp flashing green. Do not perform any key operation during that time. Also, it is a good idea to use a tripod to avoid image blur due to camera movement when shooting at slow shutter speeds.

Your camera includes a sample scene that optimizes settings for auction site images. Depending on your camera model, the sample scene is named either For eBay or Auction. Images you record using the auction site sample scene are stored in a special folder so you can easily find them on your computer (page 139).

High Sensitivity The high sensitivity setting is disabled whenever the cameras flash fires. High sensitivity may not produce the desired results in very dark conditions. When shooting with slow shutter speeds, use a tripod to protect against blurring

due to camera movement. Under certain lighting conditions, the camera will perform an automatic noise

filtering operation to reduce digital noise in the image. This operation causes the camera to take longer than normal to save the image and be ready for the next shot.

BEST SHOT scene images were not shot using this camera. Images shot using a BEST SHOT scene may not produce the results you expected

due to shooting conditions and other factors. You can modify the camera settings that are made after you select a BEST SHOT

scene. Note, however, that the BEST SHOT settings revert to their defaults when you select another BEST SHOT scene or turn off the camera.

63 Using BEST SHOT

You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them.

1. On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene) and then press [SET].

2. Use [4] and [6] to select the snapshot or movie whose setup you want to save.

3. Use [8] and [2] to select Save, and then press [SET]. Your BEST SHOT scene will be assigned the name Recall User Scene, along with a scene number.

NOTE BEST SHOT snapshot scenes can be used for snapshots only and movie scenes

can be used for movies only. You can check the settings of the currently selected BEST SHOT scene by

displaying the cameras setting menus and looking at its settings. User snapshot scenes are assigned numbers in the sequence: SU1, SU2, and so

on, while movies are assigned numbers in the sequence: MU1, MU2, and so on. The following are the settings that are saved for each user snapshot BEST SHOT

scene. Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting, Make-up Mode, Landscape Mode, Flash Intensity, Color Filter, Sharpness, Saturation, Contrast

The following are the settings that are saved for each user movie BEST SHOT scene. Focus, EV Shift, White Balance, Color Filter, Sharpness, Saturation, Contrast

User BEST SHOT scenes are stored in built-in memory (page 139) in the SCENE folder (snapshots) or MSCENE folder (movies).

Formatting the cameras built-in memory (page 150) deletes all user BEST SHOT scenes.

Use the following procedure when you want to delete a user BEST SHOT scene. 1 Display the information screen (page 61) of the user BEST SHOT scene you

want to delete. 2 Press [2] ( ), select Delete, and then press [SET].

The setup of an image recorded with Premium Auto cannot be saved as a user BEST SHOT setup.

Creating Your Own BEST SHOT Setups

64 Using BEST SHOT

You can use this procedure to shoot a portrait and then print it out in the following standard ID photo sizes: 30x24mm, 40x30mm, 45x35mm, 50x40mm, 55x45mm.

1. On the BEST SHOT scene menu, select the ID Photo scene.

2. Press the shutter button to shoot a portrait of the person for whom you want to create an ID photo.

3. Adjust the position of the face in the image.

4. Press [SET]. This saves the image in memory. The resulting image is always saved as a 5M (2560x1920 pixels) size image,

regardless of the cameras image size setting.

Printing an ID Photo The print operation outputs multiple copies of the same image on the same sheet in various standard ID photo sizes. Cut out the image(s) you need. Actual prints are slightly larger than the standard ID photo sizes to facilitate

trimming. When printing an ID photo, be sure to select 4"x6" as the paper size (page 116). When printing an ID photo, be sure to set up your printer for borderless print. For

full details, see the user documentation that comes with your printer.

Shooting ID Photographs

[8] [2] [4] [6] : Moves the portrait up, down, left, and right. Zoom controller : Zooms the portrait in and out.

Head line

Oval boundary

Chin line

65 Using BEST SHOT

1. On the BEST SHOT scene menu, select the Business cards and documents or White board, etc. scene.

2. Press the shutter button to shoot the image. This image will appear on the monitor screen with a red boundary around the area that is selected for keystone correction. If there is a black boundary, it means that the camera detected more than one area that could be keystone corrected. Use [4] and [6] to move the boundary to the area you want to keystone correct. The message Cannot correct image! will appear on the monitor screen if

there are no areas that need to be keystone corrected, and the image will be saved to memory as it is.

3. Use [8] and [2] to select Correct and then press [SET]. This will correct the image and save the resulting (corrected) image.

Shooting Images of Business Cards and Documents A process called keystone correction makes lines straight and natural, even if rectangular subjects are shot from an angle.

Before keystone correction

After keystone correction

BEST SHOT has two scenes.

Business cards and documents White board, etc.

66 Using BEST SHOT

NOTE When composing an image like the ones shown above, make sure that the entire

outline of the object you are trying to shoot is enclosed within the monitor screen. Make sure the object is against a background that allows its outline to stand out. VGA size images are stored as VGA size images. All other size images are stored

as 2M (1600x1200 pixels) images. Digital zoom is disabled while shooting with the White board, etc. and Business

cards and documents scenes. However, you can use optical zoom (page 48).

With this feature, you can shoot your own self-portrait simply by pointing the camera at your face. BEST SHOT has two self-portrait scenes from which to choose.

1. On the BEST SHOT scene menu, select Self-portrait (1 person) or Self-portrait (2 people).

2. Press the shutter button all the way down, and point the camera at yourself. About three seconds after you press the shutter button, the camera will go into Auto Shutter standby and start face detection. The camera will go into Auto Shutter standby and detect the faces of any people in the image. When the camera is able to detect the number of required individuals, it will release the shutter automatically when it determines there is no image blur. The camera will emit a shutter sound and the front lamp will flash twice when

the shutter is released. To cancel Auto Shutter standby, press [SET].

Recording a Self-portrait

Self-portrait (1 person): Shoots when the face of at least one person, including you, is detected.

Self-portrait (2 people) : Shoots when the faces of at least two people, including you, are detected.

67 Using BEST SHOT

IMPORTANT!

If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again.

Shooting with the self-portrait feature may produce a blurred image when shooting in areas where lighting is dim, which results in a very slow shutter speed setting.

The Auto Power Off (page 147) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 147) is disabled while Auto Shutter is being used.

Multi-motion Image can be used to isolate a moving subject within a series of multiple images and places them against a stationary background. Make sure that the camera is not moving or shaking when shooting with Multi-motion Image.

1. On the BEST SHOT scene menu, select the Multi-motion Image scene.

2. Press the shutter button to start shooting. Continuous Shutter shooting will stop after some time, and the resulting composite image will appear on the monitor screen. Keep the camera still until all of the continuous shutter images are recorded. When using this feature, image size is fixed at 3M (2048x1536 pixels).

Isolating Moving Subjects (Multi-motion Image)

68 Advanced Settings

Advanced Settings The following are menu operations you can use to configure various camera settings. You also can use the Control Panel (page 33) to configure some of the settings that

appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel.

. Example Menu Screen Operation

1. In the REC mode, press [MENU]. This will display the menu screen. Menu contents are different in the REC mode and PLAY

mode.

2. Use [4] and [6] to select the tab where the menu item you want to configure is located.

3. Use [8] and [2] to select the menu item you want, and then press [6].

4. Use [8] and [2] to change the setting of the selected menu item.

5. After the setting is the way you want, press [SET] to apply the setting and return to the viewfinder screen. Pressing [4] instead of [SET] applies the

selected setting and returns to the menu item selection.

To configure settings on another tab after pressing [4] to return to the menu item selection, use [8] to move the highlighting up to the tabs, and then use [4] and [6] to select the tab you want.

Pressing [MENU] interrupts the menu operation and exits the menu screen.

IMPORTANT!

Switching the recording mode (page 31) to Premium Auto or Silent will make some menu items unavailable.

Using On-screen Menus

[SET]

[8] [2] [4] [6]

[MENU]

Selected menu item

Example: When Self-timer is selected on the REC tab

Tabs

Settings

69 Advanced Settings

. Menu Operations in This Manual Menu operations are represented in this manual as shown below. The following operation is the same one described under Example Menu Screen Operation on page 68.

Procedure

[r] (REC) * [MENU] * REC Tab * Focus For details, see the Control Panel procedure on page 39.

Procedure

[r] (REC) * [MENU] * REC Tab * CS Your camera has three continuous shutter modes.

To turn off a continuous shutter mode, select Off. * fps (frames per second) is a unit of measurement indicating the number of images

recorded or played back per second.

REC Mode Settings (REC)

Selecting a Focus Mode (Focus)

Using Continuous Shutter (CS)

CS speed Maximum CS Shots Recorded Image Size Flash Mode

4 fps 4 images per second 8 shots 2M (1600x1200 pixels)

fixed Flash Off

10 fps 10 images per second 20 shots 1M (1280x960 pixels)

fixed Flash Off

Flash CS 3 images per second 3 shots 2M (1600x1200 pixels)

fixed Flash On

Procedure

[r] (REC) * [MENU] * REC Tab * Self-timer

Use [4] and [6] to select the REC tab.

Use [8] and [2] to select the Self-timer and then press [6].

Press [MENU].

Press [r] (REC).

70 Advanced Settings

1. Use [8] and [2] to select the continuous shutter mode you want, and then press [SET].

2. Press the shutter button to shoot. Images continue to be shot as long as you keep the shutter button depressed. Releasing the shutter button stops shooting.

IMPORTANT!

If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen.

Make sure your memory card has sufficient remaining capacity before shooting with continuous shutter.

With continuous shutter, exposure and focus for the first image are applied for successive images as well.

When using a continuous shutter mode, keep the camera still until shooting is finished.

Continuous shutter cannot be used in combination with any of the following. Premium Auto Some BEST SHOT scenes Make-up Mode, Landscape Mode

The ISO sensitivity setting always is Auto for continuous shutter. You cannot use the self-timer in combination with 4 fps or 10 fps. The flash range for Flash CS is narrower than that for normal flash. Shooting a very bright subject can cause a vertical band or a pink cast on the

monitor screen image. This does not indicate malfunction.

Procedure

[r] (REC) * [MENU] * REC Tab * Self-timer For details, see the Control Panel procedure on page 45.

Using the Self-timer (Self-timer)

71 Advanced Settings

Procedure

[r] (REC) * [MENU] * REC Tab * Auto Shutter With Auto Shutter, the camera releases the shutter automatically when it detects that certain conditions are present.

. To use Detect Blur to minimize image blur (Detect Blur)

1. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically.

2. Press the shutter button the rest of the way down. The camera will go into a standby mode and start detecting hand and subject movement. The camera will release the shutter automatically the moment it determines there is no image blur. 0 Auto flashes on the monitor screen while

detection of image blur due to hand movement or subject movement is in progress.

Using Auto Shutter (Auto Shutter)

Detect Blur Camera releases the shutter automatically when it detects image blur to camera and subject movement are minimized.

Detect Panning When panning, the camera releases the shutter automatically when it determines there is no blur in the subject being followed.

Detect Smile Camera releases the shutter automatically when it detects the subject is smiling.

Indicator: The indicator color changes from red to green when the camera is getting ready to release the shutter.

72 Advanced Settings

. To use Detect Panning to minimize image blur (Detect Panning)

1. Point the camera at location where the subject will pass and then half- press the shutter button to adjust exposure and focus.

2. Press the shutter button the rest of the way down. This will put the camera into Auto Shutter standby. Move the camera to follow the movement of the subject. The camera will release the shutter automatically the moment it determines there is no blur in the subject you are following. 0 Auto flashes on the monitor screen while

panning detection is in progress.

. To use Detect Smile to record when a subject is smiling (Detect Smile)

1. Point the camera at the subject and half-press the shutter button. Wait until the camera adjusts exposure and focus automatically.

2. Press the shutter button the rest of the way down. The camera will go into a standby mode and start detecting whether the subject is smiling. The camera will release the shutter automatically the moment it determines the subject is smiling. 0 Auto flashes on the monitor screen while smile

detection is in progress.

Indicator: The indicator color changes from red to green when the camera is getting ready to release the shutter.

Indicator: The indicator color changes from red to green when the camera is getting ready to release the shutter.

73 Advanced Settings

. To change Auto Shutter trigger sensitivity (Sensitivity)

1. Use [8] and [2] to select Sensitivity and then press [6].

2. Use [4] and [6] to select the sensitivity setting you want, and then press [SET]. You can select any one of three sensitivity levels, from (Lowest) to (Highest).

With the (Highest) setting, the auto shutter release is triggered relatively easily. Auto shutter release triggering becomes more difficult with the (Lowest) setting, but recorded images have the least blur. Experiment with Auto Shutter trigger sensitivity settings to find the one that work best for you.

Tips for Better Auto Shutter Snapshots Using Auto Shutter in combination with Anti Shake (page 74) reduces the chance

of image blur even more. While recording with Detect Blur or Detect Smile, keep the camera as still as

possible until the recording operation is complete.

IMPORTANT!

If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again.

Detect Blur and Detect Panning may not produce the desired effect when shooting in an area where dim lighting requires a slow shutter speed, or when the subject is moving extremely quickly.

Since facial expressions differ from individual to individual, you may experience problems with getting the camera to release the shutter while Detect Smile is being used. If this happens, change the trigger sensitivity setting.

The Auto Power Off (page 147) trigger time is fixed at five minutes while the camera is in Auto Shutter standby. Sleep (page 147) is disabled while Auto Shutter being used.

To cancel Auto Shutter recording while Auto Shutter is being performed (indicated by 0 Auto flashing on the monitor screen), press [SET].

The Tracking setting for the AF area cannot be used while Detect Blur or Detect Panning is selected for the Auto Shutter setting (page 42).

Always make sure you had Spot selected for the AF area whenever you are using the Detect Smile Auto Shutter setting (page 42).

Auto Shutter cannot be used in combination with any of the following features. Premium Auto Some BEST SHOT scenes

The following function is disabled when shooting with Auto Shutter. Triple Self-timer

74 Advanced Settings

Procedure

[r] (REC) * [MENU] * REC Tab * Face Detection For details, see the Control Panel procedure on page 46.

Procedure

[r] (REC) * [MENU] * REC Tab * Continuous AF When shooting a snapshot while On is selected for Continuous AF, Auto Focus is performed and focusing is continually updated until you half-press the shutter button. Before you half-press the shutter button, the camera focuses at the center of the

screen. If Face Detection is turned on when you half-press the shutter button, focusing is performed in the area where a face is detected.

Shooting with Continuous AF can cause vibration and noise to occur due to lens operation. This does not indicate malfunction.

Procedure

[r] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the cameras Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature. These two features work in concert to minimize the effects of hand and subject movement.

Shooting with Face Detection (Face Detection)

Shooting with Continuous Auto Focus (Continuous AF)

Reducing the Effects of Camera and Subject Movement (Anti Shake)

On Minimizes the effects of hand and subject movement.

Off Turns off Anti Shake settings

DEMO Half-pressing the shutter button demonstrates the effect of Anti Shake. However, the image is not recorded.

A

F

75 Advanced Settings

NOTE Only Camera Stabilizer can be used during movie recording. ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen

when you half-press the shutter button while On is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot.

Shooting while On is selected can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.

Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe.

Anti Shake may not work properly when the camera is mounted on a tripod. Turn off Anti Shake.

Procedure

[r] (REC) * [MENU] * REC Tab * AF Area For details, see the Control Panel procedure on page 42.

Procedure

[r] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter button while this setting is selected causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits from short distances, etc.

IMPORTANT!

Never look directly into the front lamp while it is lit.

Procedure

[r] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. When digital zoom is turned off, operating the zoom controller zooms the image with optical zoom only.

Specifying the Auto Focus Area (AF Area)

Using the Auto Focus Assist Light (AF Assist Light)

Turning Digital Zoom On or Off (Digital Zoom)

Front lamp

76 Advanced Settings

Procedure

[r] (REC) * [MENU] * REC Tab * Grid The on-screen grid can be displayed on the REC mode monitor screen for easy vertical and horizontal alignment when composing images.

Procedure

[r] (REC) * [MENU] * REC Tab * Review While Review is turned on, the camera will display an image for about one second immediately after you press the shutter button to record it.

Procedure

[r] (REC) * [MENU] * REC Tab * Icon Help While Icon Help is turned on, a textual description will appear on the display for certain icons when you switch between REC functions.

Functions Supported by Icon Help REC Mode, Flash, Metering Mode, White Balance, Self-timer, EV Shift

Displaying the On-screen Grid (Grid)

Turning on Image Review (Review)

Using Icon Help (Icon Help)

77 Advanced Settings

Procedure

[r] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.

* Optical zoom setting only.

Configuring Power On Default Settings (Memory)

Setting Disabled (Initial Default Setting) Enabled

Effect Off

Setting at power off

Auto Shutter Off

Flash Auto

Focus AF (Auto Focus)

White Balance Auto

ISO Auto

EV Shift Off

AF Area Spot

Metering Multi

CS Off

Self-timer Off

Flash Intensity 0

Single SR Quality Off

Single SR Zoom On

Digital Zoom On

MF Position Position before manual focus was selected.

Zoom Position* Full wide

78 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * Single SR Quality Super resolution technology is used to categorize an image into three parts: an outline part, a fine pattern part, and a flat part, and then perform the optimum process required by each part to increase texture and sharpness. Single SR Quality is effective when you want to capture delicate textures. A icon is displayed when the Single SR Quality setting is On. Single SR Quality is enabled for the entire zoom range, including digital zoom. It does not work during movie recording. The following functions are disabled when shooting with Single SR Quality.

Continuous Shutter, Triple Self-timer, Make-up Mode, some BEST SHOT scenes

Procedure

[r] (REC) * [MENU] * Quality Tab * Single SR Zoom See page 51 for details.

Procedure

[r] (REC) * [MENU] * Quality Tab * Size For details, see the Control Panel procedure on page 36.

Image Quality Settings (Quality)

Shooting Snapshots of better Texture and Sharpness (Single SR Quality)

Zooming with Super Resolution (Single SR Zoom)

Specifying Snapshot Size (Size)

79 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab *T Quality (Snapshot)

The Fine setting helps to bring out details when shooting a finely detailed image of nature that includes dense tree branches or leaves, or an image of a complex pattern.

Memory capacity (the number of images you can record) will be affected by the quality settings you configure (page 176).

Procedure

[r] (REC) * [MENU] * Quality Tab * Quality (Movie) Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot.

The 16:9 aspect ratio is available when HD is selected as the image quality. Memory capacity (Movie recording time you can shoot) will be affected by the

quality settings you configure (page 177).

Specifying Snapshot Image Quality (Quality (Snapshot))

Fine Gives image quality priority.

Normal Normal

Specifying Movie Image Quality (Quality (Movie))

Image Quality (Pixels) Approximate Data Rate Frame Rate

HD 1280x720 19.2 Megabits/second 24 frames/second

STD 640x480 12.2 Megabits/second 30 frames/second

80 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * Effect When either mode described below is selected, the camera will automatically touch up people and scenery to help ensure beautiful images every time.

. Shooting with the Make-up Mode (Make-up)

1. Enter the Make-up Mode Entering the Make-up Mode causes the to

appear on the Control Panel.

2. Press [SET].

3. Use [4] and [6] to select Make-up Level (third Control Panel icon from the bottom), and then press [SET]. You can set one of 13 levels in the range of 0 (Off) (no correction) to +12

(Max.) (maximum correction). The larger the value, the greater the processing that is performed.

4. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one.

5. Half-press the shutter button. The camera will focus on the face, which will cause frames around it to turn green.

6. When you are ready to shoot, press the shutter button all the way down.

Recording Beautiful Images of People and Scenery (Effect)

Make-up This mode smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits.

Landscape This mode makes colors more vivid, filters haze, and performs other processing that enhances the beauty of natural scenery.

Make-up icon

81 Advanced Settings

. Shooting Beautiful Scenery Images (Landscape)

1. Enter the Landscape Mode Entering the Landscape Mode causes the to

appear on the Control Panel.

2. Press [SET].

3. Use [4] and [6] to select the Landscape Mode setting (third Control Panel icon from the bottom), and then press [SET].

Available level settings are +1 (Weak) and +2 (Strong).

4. Point the camera at the scenery you want to record.

5. Press the shutter button to shoot.

NOTE The Make-up Mode and Landscape Mode cannot be used during movie recording. The following functions cannot be used together with the Make-up Mode:

Continuous Shutter, Triple Self-timer, Face Detection, Landscape Mode, Some BEST SHOT scenes

The following functions are disabled while the camera is in the Landscape Mode: Continuous Shutter, Triple Self-timer, Make-up Mode, Face Detection, Lighting, Color Filter, Sharpness, Saturation, Contrast, Some BEST SHOT scenes

Switching from Auto to Premium Auto (page 23) causes the Make-up and/or Landscape Mode features to be applied automatically. Because of this, you cannot enter the Make-up Mode or Landscape Mode while you are using Premium Auto.

You will not be able to configure Make-up Level or Vivid Landscape and Mist Removal settings unless Face Detection/Make-up/Landscape is specified as a Control Panel item (page 34).

Vivid Landscape

Enhances colors to produce a clearer, more vivid landscape image.

Mist Removal Corrects for misty and cloudy conditions for scenery images that appear as if they were shot on a clear day.

Landscape icon

82 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * EV Shift For details, see the Control Panel procedure on page 47.

Procedure

[r] (REC) * [MENU] * Quality Tab * White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.

When Auto is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the white balance setting that matches your shooting conditions (Daylight, Overcast, etc.)

Correcting Image Brightness (EV Shift)

Controlling White Balance (White Balance)

Auto Configures the camera to adjust white balance automatically

(Daylight) For shooting outdoors on a clear day

(Overcast) For shooting outdoors on an overcast rainy day, in the shade, etc.

(Shade) For shooting on a clear day in the shade of trees or buildings

(Day White Fluorescent) For shooting under white or day white fluorescent lighting

(Daylight Fluorescent) For shooting under daylight fluorescent lighting

(Tungsten) For shooting under light bulb lighting

Manual

For configuring the camera manually to suit a particular light source. 1Select Manual. 2Under the lighting conditions you plan to

use when shooting, point the camera at a blank white piece of paper so it fills the entire monitor screen and then press the shutter button.

3Press [SET]. The white balance setting is retained even if you turn off the camera.

'

Blank white paper

83 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * ISO For details, see the Control Panel procedure on page 44.

Procedure

[r] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of the subject is metered for exposure.

The currently selected metering mode is indicated by an icon on the snapshot screen. No icon is displayed when B Multi is selected as the metering mode.

Specifying ISO Sensitivity (ISO)

Specifying the Metering Mode (Metering)

Multi

Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading. This type of metering provides error-free exposure settings for a wide range of shooting conditions.

Center Weighted

Center weighted metering concentrates on the center of the focus area to measure light. This type of metering is best when you want some level of control over contrast.

Spot

Spot metering takes readings at a very small area. Use this metering method when you want exposure to be set according to the brightness of a particular subject, without being affected by surrounding conditions.

B

N

84 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas when shooting images.

You also can optimize the balance between bright areas and dark areas in existing images (page 99).

Procedure

[r] (REC) * [MENU] * Quality Tab * Color Filter Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple

Procedure

[r] (REC) * [MENU] * Quality Tab * Sharpness You can specify one of five sharpness settings from +2 (sharpest) to 2 (least sharp).

Optimizing Image Brightness (Lighting)

Extra Performs a higher level of brightness correction than the On setting. When this option is selected, it takes longer for the image to be stored after the shutter button is pressed.

On Performs brightness correction.

Off Does not perform brightness correction.

Using Built-in Color Filters (Color Filter)

Controlling Image Sharpness (Sharpness)

85 Advanced Settings

Procedure

[r] (REC) * [MENU] * Quality Tab * Saturation You can specify one of five saturation settings from +2 (most saturated) to 2 (least saturated).

Procedure

[r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to 2 (least contrast between light and dark).

Procedure

[r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify one of five flash intensity settings, from 2 (weakest) to +2 (strongest). Flash intensity may not change when the subject is too far away or too close.

Controlling Color Saturation (Saturation)

Adjusting Image Contrast (Contrast)

Specifying Flash Intensity (Flash Intensity)

86 Viewing Snapshots and Movies

Viewing Snapshots and Movies

See page 27 for the procedure for viewing snapshots.

1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view.

2. Press [SET] to start playback.

Movie Playback Controls

Playback may not be possible for movies not recorded with this camera.

Viewing Snapshots

Viewing a Movie

Fast forward/ fast reverse

[4] [6] Each press of either button increases the speed of the fast

forward or fast reverse operation. To return to normal playback speed, press [SET].

Play/pause [SET]

1 frame forward/ back

[4] [6] Holding down either button scrolls continuously.

Volume adjustment

Press [2] and then press [8] [2]. Volume can be adjusted only while movie playback is in

progress.

Information display on/off [8] (DISP)

Zoom

Slide the zoom controller in the direction of z ([). You can use [8], [2], [4], and [6] to scroll the zoomed

image on the monitor screen. You can zoom a movie image up to 4.5 times normal size.

Stop playback [MENU]

Movie icon:

Image quality

Recording time

87 Viewing Snapshots and Movies

1. Press [p] (PLAY), and then use [4] and [6] to display the panorama images you want to view.

2. Press [SET] to start playback of the panorama. Panorama playback causes the image to scroll left, right, up, or down.

Playback Controls

The following functions cannot be performed on a panorama image. Dynamic Photo, Movie Converter, MOTION PRINT, Movie Editing, Trimming, Resize, Lighting, White Balance, Brightness, Rotation

Viewing a Panorama Image

To start or pause playback [SET]

To advance scroll while paused

[4] [6] (When the slide direction is left or right) [8] [2] (When the slide direction is up or down) Holding down any button scrolls continuously.

To hide or show display information [8] (DISP)

To stop playback [MENU]

88 Viewing Snapshots and Movies

Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group.

1. Press [p] (PLAY) and then use [4] and [6] to display the CS group whose images you want to view.

2. Press [SET] to start playback the images in the CS group. This will play back the images in the CS group you selected.

Playback Controls

Viewing Continuous Shutter Images

[4] [6]

During playback, changes the playback direction and playback speed. While playback is paused, scrolls forward or back. Playback speed cannot be adjusted while the displayed image is

zoomed.

[SET] Toggles between pause and play.

Zoom controller

Zooms the image. You can use [8], [2], [4], and [6] to scroll the zoomed image on

the monitor screen.

[MENU] Exits CS group playback.

[8] (DISP) Cycles through information display formats.

[2] ( ) Displays the delete menu.

Number of image files in the CS group

First image in the CS group

CS group icon

Current image number/ number of images in

the group

Playback guide

89 Viewing Snapshots and Movies

You can delete CS images (1 image in CS group, selected images in CS group, 1 CS group) while playback is in progress or paused.

1. While CS image playback is in progress or paused, press [2] ( ).

2. Next, perform the same operations you would perform to delete normal (non-CS) images (page 28).

Use the following to divide up a CS Group into individual images.

. Dividing Up a Specific CS Group

1. While a CS group is displayed, press [MENU].

2. Use [4] and [6] to select the PLAY tab.

3. Use [8] and [2] to select Divide Group and then press [6].

4. Use [4] and [6] to display the CS group you want to divide up.

5. Use [8] and [2] to select Divide and then press [SET]. To divide up other CS group files, repeat steps 4 and 5.

Deleting Continuous Shutter Images

Dividing Up a CS Group

90 Viewing Snapshots and Movies

. Dividing Up All CS Groups

1. While a CS group is displayed, press [MENU].

2. Use [4] and [6] to select the PLAY tab.

3. Use [8] and [2] to select Divide Group and then press [6].

4. Use [8] and [2] to select Divide All Groups and then press [SET].

5. Use [8] and [2] to select Yes, and then press [SET]. Once a CS group is divided, it cannot be regrouped.

1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed.

2. Slide the zoom controller towards z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Slide the zoom controller towards w to unzoom the image.

When monitor screen contents are turned on, a graphic in the lower right corner of the screen shows what part of the zoomed image is currently displayed.

To exit the zoom screen, press [MENU]. Though the maximum image zoom factor is 8X,

certain image sizes may not allow zooming up to the full 8X.

Pressing [SET] will lock the current zoom factor for the on-screen image. You can then use [4] and [6] to scroll between images, using the same zoom factor. Pressing [SET] again will unlock the zoom factor and allow you to use [8], [2], [4] and [6] to move around the currently displayed images.

Zooming an On-screen Image

Image area

Current display area

Zoom factor

91 Viewing Snapshots and Movies

1. In the PLAY mode, slide the zoom controller towards w (]). Use [8], [2], [4] and [6] to move the selection boundary around the image menu. To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET].

1. In the PLAY mode, slide the zoom controller towards w (]) twice. This will display the calendar screen that shows the first image recorded on each day. To display the first image recorded on a particular day, use [8], [2], [4], and [6] to move the selection boundary to the day you want and then press [SET]. To exit the calendar screen, press [MENU]. If you save an image using any one of the following

functions, the image will appear in the calendar on the date that you last saved it. Lighting, White Balance, Brightness, Keystone Correction, Color Restoration, Resizing, Trimming, Copy, MOTION PRINT If you edit the date and time of an image, the image still will appear on the date it was originally recorded.

Displaying the Image Menu

Displaying Images in the Calendar Screen

Boundary

92 Viewing Snapshots and Movies

1. Use the AV cable that comes with the camera to connect it to the TV.

Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

2. Turn on the TV and select its video input mode. If the TV has more than one video input, select the one where the camera is connected.

3. Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the cameras monitor screen. Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the

AV cable is connected. You also can change the aspect ratio of the screen and the video output

system (page 149).

Viewing Snapshots and Movies on a TV Screen

Yellow AV cable (bundled)

[USB/AV] port

White

Making sure that the 6 mark on the camera is aligned with the 4 mark of the AV cable connector, connect the cable to the camera.

VIDEO IN jack (yellow)

AUDIO IN jacks (white)

TV AudioVideo

93 Viewing Snapshots and Movies

4. Now you can display images and play back movies as you normally do.

IMPORTANT!

Before connecting to a TV to display images, be sure to configure the cameras [r] (REC) and [p] (PLAY) buttons for Power On or Power On/Off (page 147).

Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.

NOTE Audio is monaural. Certain TVs may cut off part of the images. All icons and indicators that appear on the monitor screen also appear on the TV

screen. You can use [8] (DISP) to change the display contents.

Recording Camera Images to a DVD Recorder or Video Deck Use one of the following methods to connect the camera to the recording device using the cameras bundled AV cable.

DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals. Camera: USB/AV port

You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can record movies by selecting Only for the slideshow Images setting (page 94). When recording images to an external device, use [8] (DISP) to clear all indicators from the monitor screen (page 151). For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using.

94 Other Playback Functions (PLAY)

Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations.

Procedure

[p] (PLAY) * [MENU] * PLAY Tab * Slideshow

For information about menu operations, see page 68.

Playing a Slideshow on the Camera (Slideshow)

Start

Starts the slideshow.

Images

Specifies the type of images to be included in the slideshow All images: Snapshots, movies, and audio recordings T Only: Snapshots and audio snapshots only Only: Movies only

Time

Time from the start to the end of the slideshow 1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes

Interval

Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or MAX. If you specify a value from 1 to 30 seconds, images change at the specified interval, but the audio portion of movies and audio snapshots will continue to play until the end. When the slideshow reaches a movie file while MAX is selected, only the first frame of the movie will displayed. Voice Recording files are not played back when MAX is selected.

95 Other Playback Functions (PLAY)

To stop the slideshow, press [SET]. Pressing [MENU] instead of [SET] stops the slideshow and returns to the menu screen.

Adjust audio volume by pressing [2] and then press [8] or [2] during playback. All button operations are disabled while the slideshow is transitioning from one

image to another. The time required for transition from one image to another may be longer in the

case of an image that was not recorded with this camera.

You can replace the built-in slideshow background music with other music from your computer.

Supported File Types: PCM format (16-bit, monaural) WAV files Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz

Number of Files: 9 File names: SSBGM001.WAV to SSBGM009.WAV Create the music files on your computer using the above names. Regardless of which effect pattern you select, the BGM files you store in camera

memory are played back in name sequence.

Effect

Select the effect you want. Pattern 1 to 5: Plays background music and applies an image change effect. Patterns 1 through 4 have different background music, but they all use the

same image change effect. Pattern 5 can be used for playback of snapshots only, and the Interval

setting is ignored. The currently selected image change effect setting is disabled automatically

in following cases. When playing a slideshow for which Only is selected for the Images

setting When the interval setting is MAX, 1 second or 2 seconds. Before and after playback of a movie or Voice Recording file

Off: No image change effect or background music

Saving Music from Your Computer to Camera Memory

96 Other Playback Functions (PLAY)

1. Connect the camera to your computer (pages 122, 133). If you plan to save the music files to the cameras memory card, make sure the card is loaded in the camera.

2. Perform one of the following operations to open the memory card or built-in memory. This will cause the camera to be recognized by your computer as a Removable Disk (Drive). Windows 1Windows 7, Windows Vista: Start * Computer

Windows XP: Start * My Computer 2Double-click Removable Disk.

Macintosh 1Double-click the cameras drive icon.

3. Create a folder named SSBGM.

4. Double-click the SSBGM folder you created and copy the background music file to it. See the user documentation that comes with your computer for information

about moving, copying, and deleting files. If there are background music files both in built-in memory and on the memory

card loaded in the camera, the files on the memory card take priority. See page 139 for information about camera folders.

5. Disconnect the camera from the computer (pages 124, 134).

Procedure

[p] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab * MOTION PRINT

1. Use [4] and [6] to scroll through the movie frames and display the one you want to use as the image of the MOTION PRINT image. Holding down [4] or [6] scrolls at high speed.

2. Use [8] and [2] to select Create and then press [SET]. Only the frames of movies recorded on this camera can be used in a MOTION

PRINT image.

Creating a Snapshot of Movie Frames (MOTION PRINT)

97 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Editing The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie.

1. Use [8] and [2] to select the editing method you want to use and then press [SET].

2. Use [4] and [6] to scroll through the movie and search for the frame (point) from which or to which you want to cut the movie (the cut point). You also can search for the cut location by playing

back the movie and pressing [SET] to pause. During playback, you can press [4] or [6] to perform fast reverse or fast forward.

Editing a Movie on the Camera (Movie Editing)

Cut (To-Point Cut)

Cuts everything from the beginning of the movie up to the current location.

Cut (Point-To-Point Cut) Cuts everything between two points.

Cut (From-Point Cut)

Cuts everything from the current location to the end of the movie.

}

~

Cut range (red)

98 Other Playback Functions (PLAY)

3. When the frame where you want the cut point to be is displayed, press [2].

4. Use [8] and [2] to select Yes and then press [SET]. The selected cut operation will take considerable time to complete. Dont try to perform any camera operation until the Busy... Please wait... message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long.

IMPORTANT!

When you edit a movie, only the result is saved. The original movie is not retained. An editing operation cannot be undone.

NOTE A movie that is shorter than five seconds cannot be edited. Editing of movies recorded with a different type of camera is not supported. You will not be able to edit a movie if the amount of remaining memory capacity is

less than the size of the movie file you want to edit. If there is not enough memory available, delete files you no longer need to free up more.

Splitting of a movie into two movies and splicing of two different movies into a single movie are not supported.

You also can start a movie editing operation while the movie you want to edit is playing back. Press [SET] to pause playback, and then press [2] to display the menu of editing options. Perform editing using the same procedures as described above.

Cut (To-Point Cut)

While the frame you want the cut to be up to is displayed, press [2].

Cut (Point-To-Point Cut)

1While the frame you want the first (From) cut to be is displayed, press [2].

2While the frame you want the second (To) cut to be is displayed, press [2].

Cut (From-Point Cut)

While the frame you want the cut to be from is displayed, press [2].

}

~

99 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas in existing images.

NOTE Correcting the lighting when shooting produces better results (page 84). Altering the lighting of an image causes the original image and the new (altered)

version to be stored as separate files. When you display an altered image on the cameras monitor screen, the date and

time indicates when the image was originally recorded, not when the image was altered.

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Red Eye Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. Red eye correction corrects the eye colors of subjects to their normal colors when red eye occurs while using the flash.

NOTE The original snapshot is retained in memory and not deleted. Red eye correction may not be possible in the case of small faces or profiles. Red eye correction may not produce the desired effect under certain conditions.

Optimizing Image Brightness (Lighting)

+2 Performs a higher level of brightness correction than the +1 setting.

+1 Performs brightness correction.

Cancel Does not perform brightness correction.

Using Red Eye Correction (Red Eye)

Correct Turns on red eye correction.

Cancel Turns off red eye correction.

100 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image.

NOTE You also can adjust the white balance when recording images (page 82). The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and

time indicates when the image was originally recorded, not when the image was altered.

Adjusting White Balance (White Balance)

Daylight Outdoors, fair weather

Overcast Outdoors, cloudy to rain, in tree shade, etc.

Shade Very high temperature light, such as building shade, etc.

Day White Fluorescent

White or daywhite fluorescent lighting, without suppressing color cast

Daylight Fluorescent Daylight fluorescent lighting, while suppressing color cast

Tungsten Suppressing of the appearance of light bulb lighting

Cancel No white balance adjustment

'

101 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels, from +2 (brightest) to 2 (least bright).

NOTE The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and

time indicates when the image was originally recorded, not when the image was altered.

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Keystone You can use keystone correction to correct rectangular and square shapes in a snapshot that do not appear normal because they were not shot straight on. The corrected image is saved as 2M (1600x1200 pixels) size.

1. Use [4] and [6] to select the shape in the snapshot that you want to correct.

2. Use [8] and [2] to select Correct and then press [SET].

NOTE If the original image is smaller than 2M size, the new (corrected) version will be the

same size as the original. The original snapshot is retained in memory and not deleted. When you display an altered image on the cameras monitor screen, the date and

time indicates when the image was originally recorded, not when the image was altered.

Adjusting the Brightness of an Existing Snapshot (Brightness)

Keystone Correction (Keystone)

102 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Color Correction Color Correction lets you correct the color of an old photograph. The corrected image is saved as 2M (1600x1200 pixels) size.

1. Perform the above operation. An image of the photograph you are restoring will appear on the monitor

screen with a red boundary around it. If there is a black boundary, it means that the camera detected more than one rectangular area in the image. Use [4] and [6] to move the boundary and select the area of the photograph.

2. Use [8] and [2] to select Trim, and then press [SET]. This will display a selection boundary for trimming the on-screen image.

3. Slide the zoom controller to resize the selection boundary and specify the image size you want.

4. Use [8], [2], [4], and [6] to move the selection boundary to it encloses the area of the image you want to trim to and then press [SET].

NOTE If the original image is smaller than 2M size, the new (corrected) version will be the

same size as the original. The original snapshot is retained in memory and not deleted. If you do not want a border around the resulting image, select an area that is

smaller than the original image. When you display a color corrected image on the cameras monitor screen, the

date and time indicates when the image was originally recorded, not when the image was color corrected.

Using Color Correction to Correct the Color of an Old Photograph (Color Correction)

103 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing See page 117 for details.

Procedure

[p] (PLAY) * [MENU] * PLAY Tab * Protect

IMPORTANT!

Note that even if a file is protected, it will be deleted if you perform the format operation (page 150).

Selecting Images for Printing (DPOF Printing)

Protecting a File Against Deletion (Protect)

On

Protects specific files. 1Use [4] and [6] to scroll through the files

until the one you want to protect is displayed.

2Use [8] and [2] to select On and then press [SET]. An image that is protected is indicated by the icon.

3To protect other files, repeat steps 1 and 2. To exit the protect operation, press [MENU]. To unprotect a file, select Off instead of On in step 2 above.

All Files: On

Protects all files. 1Use [8] and [2] to select All Files: On and then press [SET]. 2Press [MENU]. To unprotect all files, select All Files: Off instead of All Files: On in step 1 above.

104 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time

When the date and time settings are what you want, press [SET] to apply them.

NOTE The date and time stamped into an image using the Time Stamp (page 145) cannot

be edited. You cannot edit the date and time of an image that is protected. You can input any date from 1980 to 2049.

Procedure

[p] (PLAY) * Snapshot or Movie Screen * [MENU] * PLAY Tab * Rotation

1. Use [8] and [2] to select Rotation and then press [SET]. Each press of [SET] will rotate the displayed image 90 degrees left.

2. When the displayed image is at the orientation you want, press [MENU].

NOTE Note that this procedure does not actually change the image data. It simply alters

how the image is displayed on the cameras monitor screen. An image that has been protected or zoomed cannot be rotated. The original (unrotated) version of the image will be displayed on the image menu

screen and the calendar screen.

Editing the Date and Time of an Image (Date/Time)

[8] [2] Changes the setting at the cursor location

[4] [6] Moves the cursor between settings

[0] (Movie) Toggles between 12-hour and 24-hour format

Rotating an Image (Rotation)

105 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can select resize an image to one of three image sizes: 10M, 6M, VGA. Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of

4:3, with both sides cut off. The recording date of the resized version of the snapshot will be the same as the

recording date of the original snapshot.

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained.

Use the zoom controller to zoom the image to the size you want, use [8], [2], [4], and [6] to display the portion of the image you want to cut out, and then press [SET]. The image produced by cropping a 3:2 or 16:9 image

will have an aspect ratio of 4:3. The recording date of the cropped image will be the

same as the recording date of the original snapshot.

Resizing a Snapshot (Resize)

Cropping a Snapshot (Trimming)

Represents snapshot area

Part of snapshot that is currently displayed

Zoom factor

106 Other Playback Functions (PLAY)

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing

2. Press [SET] again to stop audio recording. Take care that you do not block the cameras

microphone with your fingers while recording. Good recording results are not possible when the

camera is too far away from what you are trying to record.

Your camera supports the following audio data formats. Audio Format: WAVE/IMA-ADPCM (WAV extension)

Adding audio (dubbing) is not possible for the following types of images. Images created using MOTION PRINT Protected images

To delete audio, perform the following operation: Dubbing * Delete * [SET] * [MENU].

IMPORTANT!

Note that you cannot restore the original audio of an Audio Snapshot after you delete or re-record it.

1. In the PLAY mode, use [4] and [6] to scroll through the images until the Audio Snapshot you want is displayed. An audio snapshot is one that has a icon.

2. Press [SET] to start playback.

Adding Audio to a Snapshot (Dubbing)

You can add audio to a snapshot after you shoot it. You can re-record a snapshots audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.

1. Press [SET] to start audio recording.

Remaining recording time

To play snapshot audio

Microphone

107 Other Playback Functions (PLAY)

Voice Recording Playback Controls

Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime.

Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy Files can be copied from the cameras built-in memory to a memory card or from a memory card to built-in memory.

NOTE You can copy snapshots, movies, audio snapshots, or Voice Recording files you

recorded with this camera. When a copied image appears on the full-month calendar screen, it is displayed on

the date that it was copied (page 91).

Fast forward/fast reverse [4] [6]

Play/pause [SET]

Volume adjustment Press [2] and then press [8] [2].

Display content switching [8] (DISP)

Stop playback [MENU]

Copying Files (Copy)

Built-in * Card Copies all files from built-in camera memory to a memory card. This option copies all the files in built-in camera memory. It cannot be used to copy a single file.

Card * Built-in

Copies a single file on the memory card to camera built-in camera memory. Files are copied to the folder in built-in memory whose name has the largest serial number. 1Use [4] and [6] to select the file you want to copy. 2Use [8] and [2] to select Copy and then press [SET].

108 Dynamic Photo

Dynamic Photo You can use the procedures in this section to crop either a moving subject or a still subject out of a snapshot and then insert it into another snapshot or movie.

1. In the REC mode, set the mode dial to b (BEST SHOT).

2. Press [SET].

3. Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).

4. Use [8], [2], [4], and [6] to select the Dynamic Photo scene and then press [SET].

5. Press [SET], use [8] and [2] to select Subject Type, and then press [SET].

To create a subject image to be inserted (Dynamic Photo)

Moving Subject Another Image Dynamic Photo Image

109 Dynamic Photo

6. Use [8] and [2] to specify the subject type, and then press [SET].

To create a still subject, select Still Subject.

7. Press [SET], use [8] and [2] to select Number of Shots, and then press [SET].

8. Use [8] and [2] to select either 1 or 2 and then press [SET].

CS speed Number of Shots Subject type

Moving Subject 1sec (18fps)

18 images per second 20 shots Records multiple images of

the subject, which are cropped and combined to create movement against the background image.

Moving Subject 2sec (10fps)

10 images per second 20 shots

Moving Subject 4sec (5fps)

5 images per second 20 shots

Still Subject 1 shot

Records a single subject, which is cropped and inserted into the background image.

To shoot under these conditions:

Select this setting:

Select this option:

The subject against a complex background 2 You need to shoot twice to extract the

subject.

The subject against a plain (no pattern) background

1

You need to shoot only once to extract the subject. If you select this option, you will not need to perform steps 10 and 11 of the procedure below.

Text written on white paper Text See page 111.

110 Dynamic Photo

9. First, shoot an image that includes the subject you want to extract. Shoot an image in which the subject is as large as

possible. If you selected 2 for the Number of Shots setting, the images should include some easily identifiable reference point that you can use for later alignment in step 10 below.

If you selected Moving Subject the camera will record multiple subject images. Do not move the camera until shooting is complete.

If you selected 1 for the Number of Shots setting, this procedure is complete with this step. The camera will extract the subject and display it on the monitor screen. If you selected Moving Subject in step 6, the subject image will be moving on the display.

Even if you select 1 for the Number of Shots setting, certain conditions can cause the setting to switch automatically to 2.

Flash is turned off automatically at this time.

10. Next, compose the image again, this time without the subject you want to extract. Take care so the image composition here is as close as possible to the image composition in step 9.

11. Press the shutter button to shoot the background only. The camera compares the images you shot in steps 9 and 11 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected Moving Subject, the subject image will be moving on the display. You can interrupt an ongoing subject extraction process (steps 9 through 11) at

any time by pressing [MENU].

IMPORTANT!

When shooting the subject image, shoot against a white wall or some other surface of a color that is different from that of the subject. The camera will not be able to crop the subject image properly if it is the same or similar color as the background.

The camera may not be able to cleanly crop a subject that is not clearly defined on the monitor screen due to backlighting, shadows, light smear, insufficient lighting, etc. When shooting the subject, make sure that it is clearly defined and outlined on the monitor screen.

The background you shoot in step 8 of the above procedure is not saved. Only the cropped subject image is saved.

111 Dynamic Photo

You can write text on a blank sheet of paper, shoot an image of it, and then extract the text for insertion into an image.

1. In the REC mode, set the mode dial to b (BEST SHOT).

2. Press [SET].

3. Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).

4. Use [8], [2], [4], and [6] to select the Dynamic Photo scene and then press [SET].

5. Press [SET], use [8] and [2] to select Number of Shots, and then press [SET].

6. Use [8] and [2] to select Text and then press [SET].

7. Press the shutter button to shoot what is written on the paper.

IMPORTANT!

When shooting text, take care to make sure that only the paper it is written on completely fills the screen. Do not allow the edges of the paper to be included in the text image.

Use the following procedure to insert a subject image into a snapshot or movie.

Procedure

[p] (PLAY) * [MENU] * PLAY Tab * Dynamic Photo

1. Use [4] and [6] to select the background image you want and then press [SET]. Only an image that satisfies the following conditions can be used as a

background image. A snapshot or movie recorded with this camera or a snapshot transferred to

this cameras memory using Photo Transport (page 128) A snapshot with an aspect ratio of 4:3

2. Use [4] and [6] to select the subject image you want to insert and then press [SET].

Extracting Text from an Image

Inserting a Subject into a Snapshot or Movie (Dynamic Photo)

112 Dynamic Photo

3. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift the location to the position you want. After you are finished, press [SET]. If you insert a subject into a movie, the resulting movie will be a maximum of 20

seconds long. Everything before and after the insertion is cut off. If the movie you are inserting into (original movie) is shorter than 20 seconds, the resulting movie will be the same length as the original movie.

If you are inserting a subject into a snapshot, skip directly to step 4.

4. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position.

5. When everything is the way you want, press [SET]. This inserts the subject into another image and creates a Dynamic Photo. Inserting an animated subject into a snapshot will save a Dynamic Photo that

consists of 20 still images of 2M size or smaller. Inserting a stationary subject into a snapshot will save a single still image of 6M

size or smaller. Inserting a subject into a movie will save the Dynamic Photo as a movie file.

NOTE The camera comes with a number of extracted sample subjects in its built-in

memory, which you can use to create Dynamic Photos, if you like. Performing a delete or format operation will not delete the extracted sample

subjects in built-in camera memory.

Insert location

B

113 Dynamic Photo

1. Press [p] (PLAY) and then use [4] and [6] to display the Dynamic Photo you want to view.

2. If you want to see the subject in the Dynamic Photo move, press [SET]. The Dynamic Photo is repeated as a continuous loop. Movement of the subject also will start automatically about two seconds after

you display a Dynamic Photo.

A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.

Procedure

[p] (PLAY) * Dynamic Photo Screen * [MENU] * PLAY Tab * Movie Converter The final movie format is Motion JPEG. The final movie image size is 640x480 pixels.

IMPORTANT!

Following conversion, the movie will be played back three times.

To view a Dynamic Photo (Dynamic Photo File)

Converting a Dynamic Photo Still Image to a Movie (Movie Converter)

114 Printing

Printing

You can specify which images you want to print, the number of copies, and date stamp settings before printing (page 117).

Printing Snapshots

Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed.

Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer.

Connecting Directly to a PictBridge Compatible Printer You can print on a printer that supports PictBridge (page 115).

Printing with a Computer After transferring the images to your computer, use commercially available software to print.

115 Printing

You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer.

. To set up the camera before connecting to a printer

1. Turn on the camera and press [MENU].

2. On the Set Up tab, select USB and then press [6].

3. Use [8] and [2] to select PTP (PictBridge), and then press [SET].

. Connecting the Camera to a Printer Use the USB cable that comes bundled with the camera to connect the camera to your printers USB port. The camera does not

draw power over the USB cable. Make sure the cameras battery is sufficiently charged before connecting.

Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

Connecting Directly to a PictBridge Compatible Printer

USB

USB cable (included with camera)

USB port

[USB/AV] port

Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

Large connector

Small connector

116 Printing

. To print

1. Turn on the printer and load paper.

2. Turn on the camera. This will display the print menu screen.

3. Use [8] and [2] to select Paper Size, and then press [6].

4. Use [8] and [2] to select a paper size and then press [SET]. The following are the available paper sizes.

3.5"x5", 5"x7", 4"x6", A4, 8.5"x11", By Printer Selecting By Printer prints using a paper size selected on the printer. See the documentation that comes with your printer for information about

paper settings.

5. Use [8] and [2] to specify the print option you want.

To toggle date stamping on and off, press [0] (Movie). The date stamp will be printed when On is indicated on the monitor screen.

6. Use [8] and [2] to select Print and then press [SET]. Printing will start and the message Busy... Please wait... will appear on the monitor screen. The message will disappear after a short while, even though printing is still being performed. Pressing any camera button will cause the printing status to re-appear. The print menu screen will re- appear when printing is complete. If you selected 1 Image, you can repeat the procedure from step 5, if you

want.

7. After printing is complete, turn off the camera and disconnect the USB cable from the printer and camera.

1 Image : Prints one image. Select and then press [SET]. Next, use [4] and [6] to select the image you want to print.

DPOF Printing : Prints multiple images. Select and then press [SET]. With this option, images will be printed in accordance with DPOF settings (page 117).

117 Printing

. Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service. Whether or not you will be able to use DPOF settings for printing depends on the

printer you are using. Some professional print services may not support DPOF.

. Configuring DPOF Settings Individually for Each Image Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * Select images

1. Use [4] and [6] to scroll through the files until the image you want to print is displayed.

2. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. If you want to include the date in the images, press [0] (Movie) so On is

shown for date stamping. Repeat steps 1 and 2 to configure settings for other images, if you want.

3. Press [SET].

Using DPOF to Specify Images to be Printed and the Number of Copies

118 Printing

. Configuring the Same DPOF Settings for All the Images Procedure

[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images

1. Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. If you want to include the date in the images, press [0] (Movie) so On is

shown for date stamping.

2. Press [SET].

DPOF settings are not cleared automatically after printing is complete. The next DPOF print operation you execute will be performed using the last DPOF settings you configured for the images. To clear DPOF settings, specify 00 for the number of copies of all images.

Tell your print service about your DPOF settings! If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you dont, the print service may print all the images without regard to your DPOF settings, or they may ignore your date stamp setting.

119 Printing

. Date Stamping You can use one of the following three methods to include the recording date in the printout of an image.

. Standards Supported by the Camera PictBridge

This is a standard of the Camera and Imaging Products Association (CIPA).

PRINT Image Matching III Using image editing software and printing on a printer that supports PRINT Image Matching III makes it possible to use information about shooting conditions that is recorded with the image, and produce exactly the type of image you want. PRINT Image Matching and PRINT Image Matching III are trademarks of Seiko Epson Corporation.

Exif Print Printing on a printer that supports Exif Print uses information about shooting conditions recorded with the image to enhance printed image quality. Contact your printer manufacturer for information about models that support Exif Print, printer upgrades, etc.

Configuring camera settings

Configure DPOF settings (page 117). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some dont.

Configure the Cameras Time Stamp setting (page 145). The cameras Time Stamp setting imprints the date into a snapshot when you

shoot it, so the date is always included when you print. It cannot be deleted. Do not turn on DPOF date stamping for an image that includes a date

stamped with the cameras Time Stamp function. Doing so can cause the two stamps to be overprinted.

Configuring computer settings

You can use commercially available image management software to date stamp images.

Professional print service

Request date stamping when ordering prints from a professional print service.

120 Using the Camera with a Computer

Using the Camera with a Computer

You can perform the operations described below while the camera is connected to a computer.

* Windows only

The procedures you need to perform when using the camera with your computer and when using the bundled software are different for Windows and the Macintosh.

Things you can do using a computer...

Save images to a computer and view them there

Save images and view them manually (USB connection) (pages 122, 132).

Transfer images to a computer automatically over a wireless LAN for viewing (Eye-Fi) (page 136).

Transfer images stored on your computer to camera memory

In addition to images, you also can transfer screen shot images from your computer to the camera (Photo Transport*) (page 128).

Play back and edit movies

You can play back movies (pages 125, 135).

To edit movies, use commercially available software as required.

Transform snapshots into works of art

Transform your snapshots into images that look like they were painted (Virtual Painter 5 LE for CASIO*) (page 130).

Play back and edit Dynamic Photo images on your EXILIM, a computer, or on a mobile phone

You can copy moving subjects (animated characters) from your computer to the EXILIM.

You can convert Dynamic Photo images to movies and send them to a mobile phone for playback (Requires Dynamic Photo Manager*) (page 130).

Windows users should refer to Using the Camera with a Windows Computer on page 121.

Macintosh users should refer to Using the Camera with a Macintosh on page 132.

121 Using the Camera with a Computer

Install the required software in accordance with the version of Windows you are running and what you want to do.

* YouTube Uploader for CASIO, Photo Transport, Virtual Painter 5 LE for CASIO, and Dynamic Photo Manager will not run under 64-bit versions of Windows OS.

Using the Camera with a Windows Computer

When you want to do this:

Operating System Version Install this software: See

page:

Save images to a computer and view them there manually

Windows 7, Windows Vista, Windows XP (SP3)

Installation not required. 122

Play movies Windows 7, Windows Vista, Windows XP (SP3)

Installation not required. Windows Media

Player, which is already installed on most computers, can be used for playback.

125

Edit movies Windows 7, Windows Vista, Windows XP (SP3)

Use commercial

software as required.

Upload movie files to YouTube

Windows 7, Windows Vista, Windows XP (SP3)

YouTube Uploader for CASIO* 126

Transfer images to the camera

Windows 7, Windows Vista, Windows XP (SP3)

Photo Transport 1.0* 128

Transform snapshots into works of art

Windows 7, Windows Vista, Windows XP (SP3)

Virtual Painter 5 LE for CASIO* 130

Play back, copy, and edit Dynamic Photo moving subjects (animated characters)

Windows 7, Windows Vista (SP1), Windows XP (SP3)

Dynamic Photo Manager* 130

View the Users Guide

Windows 7, Windows Vista, Windows XP (SP3/SP2), Windows 2000 (SP4)

Adobe Reader 9 (Not required if already installed.)

131

122 Using the Camera with a Computer

. Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the Read me file that comes with each application for details. Information about computer system requirements also can be found under Computer System Requirements for Bundled Software (Bundled CD-ROM) on page 164 of this manual.

. Precautions for Windows Users Except for Adobe Reader, the bundled software requires Administrator privileges to

run. Operation on a self-made computer is not supported. Operation may not be possible under certain computer environments.

You can connect the camera to your computer in order to view and store images (snapshot and movie files).

NOTE You also can use your computers card slot (if it has one) or a commercially

available card reader to access image files directly from the cameras memory card. For details, see the user documentation that comes with your computer.

. To connect the camera to your computer and save files

1. Turn on the camera and press [MENU].

2. On the Set Up tab, select USB and then press [6].

3. Use [8] and [2] to select Mass Storage, and then press [SET].

Viewing and Storing Images on a Computer

123 Using the Camera with a Computer

4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer. The camera does not

draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.

Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computers USB port.

5. Turn on the camera

6. Windows 7, Windows Vista users: Click Start and then Computer. Windows XP users: Click Start and then My Computer.

7. Double-click Removable Disk. Your computer recognizes the memory card loaded in the camera (or built-in

memory if there is no card) as a removable disk.

USB port USB cable (included with camera)

Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

[USB/AV] port

Large connector

Small connector

124 Using the Camera with a Computer

8. Right-click the DCIM folder.

9. On the shortcut menu that appears, click Copy.

10. Windows 7, Windows Vista users: Click Start and then Documents. Windows XP users: Click Start and then My Documents. If you already have a DCIM folder in Documents (Windows 7, Windows

Vista) or My Documents (Windows XP), the next step will overwrite it. If you want to keep the existing DCIM folder, you need to change its name or move it to a different location before performing the next step.

11. Windows 7 users: On the Documents Organize menu, select Paste. Windows Vista users: On the Documents Edit menu, select Paste. Windows XP users: On the My Documents Edit menu, select Paste. This will paste the DCIM folder (and all the image files it contains) into your Documents (Windows 7, Windows Vista) or My Documents (Windows XP) folder. You now have a copy of the files that are in camera memory on your computer.

12. After you finish copying images, disconnect the camera from the computer. On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the back lamp is unlit, disconnect the camera from the computer.

. To view images you copied to your computer

1. Double-click the copied DCIM folder to open it.

2. Double-click the folder that contains the images you want to view.

125 Using the Camera with a Computer

3. Double-click the image file you want to view. For information about file names, see Memory Folder Structure on page 139. An image that was rotated on the camera will be displayed on your computer

screen in its original (unrotated) orientation.

IMPORTANT!

Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.

Windows Media Player, which is already installed on most computers, can be used for movie playback. To play back a movie, first copy the movie to your computer and then double-click the movie file.

. Minimum Computer System Requirements for Movie Playback The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer.

The above are recommended system environments. Configuring one of these environments does not guarantee proper operation.

Certain settings and other installed software may interfere with proper playback of movies.

Never use your computer to modify, delete, move, or rename any image files that are in the cameras built-in memory or on its memory card. Doing so can cause problems with the cameras image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

Playing Movies

Operating System : Windows 7, Windows Vista, Windows XP (SP3) CPU : Image Quality HD:

Pentium 4 3.2 GHz or higher Image Quality STD:

Pentium M 1.0 GHz or higher Pentium 4 2.0 GHz or higher

Required Software: Windows Media Player, DirectX 9.0c or higher

126 Using the Camera with a Computer

. Movie Playback Precautions Be sure to move the movie data to the hard disk of your computer before trying to

play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.

Proper movie playback may not be possible on some computers. If you experience problems, try the following. Try recording movies with a quality setting of STD. Try upgrading Windows Media Player to the latest version. Quit any other applications you have running, and stop resident applications.

Even if proper playback is not possible on the computer, you can use the AV cable that comes bundled with the camera to connect to the video input terminal of a TV or computer and play back movies that way.

Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the For YouTube BEST SHOT scene to YouTube.

. What is YouTube? YouTube is a movie sharing site managed by YouTube, LLC where you can upload movies and view movies uploaded by others.

. To install YouTube Uploader for CASIO

1. On the CD-ROM menu screen, select YouTube Uploader for CASIO.

2. After reading the information about installation conditions and system requirements for installation in the Read me file, install YouTube Uploader for CASIO.

Uploading Movie Files to YouTube

127 Using the Camera with a Computer

. To upload a movie file to YouTube Before you can use YouTube Uploader for CASIO, you need to go to the YouTube

website (http://www.youtube.com/) and register as a user there. Do not upload any video that is copyrighted (including neighboring copyrights)

unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s).

A single movie shoot with the For YouTube scene can have a maximum file size of 2048MB or a recording time of up to 15 minutes.

The maximum file size for each upload is 2048 MB.

1. On the BEST SHOT scene menu, select the For YouTube scene (page 60).

2. Press [0] (Movie) to record the movie.

3. If it isnt already, connect your computer to the Internet.

4. Connect the camera to your computer (page 122).

5. Turn on the camera. YouTube Uploader for CASIO will start up automatically. If this is the first time you are using the application, configure the YouTube user

ID and network environment settings, and then click the [OK] button.

6. The left side of the display will have an area for inputting a title, category, and other information required for uploading to YouTube. Enter the required information.

7. The right side of the display shows a list of movie files in camera memory. Select the check box next to the movie file you want to upload.

8. When everything is ready, click the [Upload] button. This will upload the movie file(s) to YouTube. After uploading is complete, click the [Exit] button to exit the application.

128 Using the Camera with a Computer

If you want to transfer images from your computer to the camera, install Photo Transport on your computer from the CD-ROM that comes with the camera.

. To install Photo Transport

1. On the CD-ROM menu screen, select Photo Transport.

2. After reading the information about installation conditions and system requirements for installation in the Read me file, install Photo Transport.

. To transfer images to the camera

1. Connect the camera to your computer (page 122).

2. On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport.

3. Drag the file(s) you want to transfer to the [Transfer] button.

4. Follow the instructions that appear on the display to complete the transfer. The details of the instructions that appear on the display and the transferred

images will depend on your Photo Transport setup. For details, click the [Settings] button or [Help] button and check the setup.

Transfer Data Only image files with the following extensions can be transferred to the camera.

jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when transferred.)

Certain types of images may not be able to be transferred. You cannot transfer movies to the camera.

Transferring Images from Your Computer to Camera Memory

129 Using the Camera with a Computer

. To transfer computer screen captures to the camera

1. Connect the camera to your computer (page 122).

2. On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport.

3. Display the screen whose screen capture you want to transfer.

4. Click the [Capture] button.

5. Draw a boundary around the area you want to capture. Move your mouse pointer to the upper left corner of the area you want to capture and then hold down the mouse button. Keeping the mouse button depressed, drag the pointer down to the lower right corner of the area and then release the mouse button.

6. Follow the instructions that appear on the display. This will send an image of the area you selected to the camera. The transfer operation converts screen captures to JPEG format. The instructions that appear on the display and details about the transferred

images will depend on your Photo Transport setup. For details, click the [Settings] button or [Help] button and check the setup.

. About settings and help Click the [Settings] button when you want to change the Photo Transport setup. For help about operation procedures and troubleshooting, click the Photo Transport [Help] button.

130 Using the Camera with a Computer

You can copy moving subjects (animated characters) from your computer to the EXILIM. You also can convert Dynamic Photo images to movies and send them to a mobile phone for playback. To perform such functions, you need to install Dynamic Photo Manager on your computer from the CD-ROM that comes with your EXILIM. For details, see the Dynamic Photo Manager users guide that comes with your EXILIM.

The CD-ROM that comes with your camera contains an application called Virtual Painter 5 LE for CASIO. By installing this application on your computer, you can transform your digital images so they appear as if they were drawn or painted by hand. You can choose from among water color, oil, color pencil or pastel effects that produce images that looked like they were done by a true virtual artist. Assistance: Umemura Taka Software Design, Inc.

. Installing Virtual Painter 5 LE for CASIO

1. Use the CD-ROM menu screen to select Virtual Painter 5 LE for CASIO.

2. First click Read me, read the information it contains about installation and computer system requirements, and then install the application. When you are prompted to input a serial number during the installation, input the following. 11-08-900006-deeNEe

IMPORTANT!

Note the following important points when inputting the serial number. Input using single-byte characters only. The serial number is case-sensitive, so be sure to input uppercase and

lowercase letters correctly.

Play back Dynamic Photo images on your EXILIM, a computer, or on a mobile phone

Transforming Snapshots into Artistic Image

131 Using the Camera with a Computer

. To transform snapshots into artistic images

1. On your computer, click the following in sequence: Start * All Programs * Virtual Painter 5 LE for CASIO. This will start up Virtual Painter 5 LE for CASIO.

2. On the toolbar, click [File] - [Open] and then select the image file you want to transform. If necessary, you can click a folder icon and select an image inside the folder.

3. On the toolbar, click [Paint] or the canvas icon to transform the image. For details about this operation, click the Virtual Painter [Help] button.

IMPORTANT!

Virtual Painter 5 LE for CASIO supports transformation of JPEG images shot with CASIO brand EXILIM Series digital cameras only. Transformation of images shot with a different brand digital camera is not supported.

Be sure to use Save As or otherwise change to a different file name when saving a snapshot that you have transformed into an artistic image. Using Save will cause the transformed image to overwrite your original snapshot, effectively deleting the original.

1. Start up your computer, and place the bundled CD-ROM into its CD- ROM drive. Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu screen automatically, navigate to the CD- ROM on your computer and then double-click the AutoMenu.exe file.

2. On the menu screen, click the Language down arrow button and then select the language you want.

3. Click Manual to select it and then click Digital Camera.

IMPORTANT!

You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you do not already have Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the bundled CD-ROM.

Viewing User Documentation (PDF Files)

132 Using the Camera with a Computer

You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the Internet with your computer.

1. On the CD-ROM menu screen, click the Register button. This starts up your Web browser and accesses the user registration website.

Follow the instructions that appear on your computer screen to register.

Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do.

IMPORTANT!

The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X 10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6) only. Use the standard USB driver that comes with your supported operating system.

NOTE You also can use your computers card slot (if it has one) or a commercially

available card reader to access image files directly from the cameras memory card. For details, see the user documentation that comes with your computer.

User Registration

Using the Camera with a Macintosh

When you want to do this:

Operating System Version

Install this software: See page:

Save images to your Macintosh and view them there manually

OS 9 Installation not required. 132

OS X

Save images to your Macintosh automatically/ Manage images

OS 9 Use commercially available software.

135 OS X Use iPhoto, which comes bundled

with some Macintosh products.

Play movies OS 9, OS X You can playback with QuickTime, which comes bundled with your operating system.

135

Connecting the Camera to Your Computer and Saving Files

133 Using the Camera with a Computer

. To connect the camera to your computer and save files

1. Turn on the camera and press [MENU].

2. On the Set Up tab, select USB and then press [6].

3. Use [8] and [2] to select Mass Storage, and then press [SET].

4. Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh. The camera does not

draw power over the USB cable. Check the battery level before connecting and make sure it is not too low.

Make sure that you insert the cable connector into the USB/ AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computers USB port.

5. Turn on the camera. The cameras back lamp will light green at this time. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the cameras built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using.

USB port USB cable (included with camera)

Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

[USB/AV] port

Large connector

Small connector

134 Using the Camera with a Computer

6. Double-click the cameras drive icon.

7. Drag the DCIM folder to the folder to which you want to copy it.

8. After the copy operation is complete, drag the drive icon to Trash.

9. On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer.

. To view copied images

1. Double-click the cameras drive icon.

2. Double-click the DCIM folder to open it.

3. Double-click the folder that contains the images you want to view.

4. Double-click the image file you want to view. For information about file names, see Memory Folder Structure on page 139. An image that was rotated on the camera will be displayed on your Macintosh

screen in its original (unrotated) orientation.

IMPORTANT!

Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.

Never use your computer to modify, delete, move, or rename any image files that are in the cameras built-in memory or on its memory card. Doing so can cause problems with the cameras image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

135 Using the Camera with a Computer

If you are running Mac OS X, you can manage snapshots using iPhoto, which comes bundled with some Macintosh products. If you are running Mac OS 9, you will need to use commercially available software.

You can use QuickTime, which comes bundled with your operating system, to play back movies on a Macintosh. To play back a movie, first copy it to your Macintosh and then double-click the movie file.

. Minimum Computer System Requirements for Movie Playback The minimum system requirements described below are necessary to play back movies recorded with this camera on a computer.

The above are recommended system environments. Configuring one of these environments does not guarantee proper operation.

Certain settings and other installed software may interfere with proper playback of movies.

. Movie Playback Precautions Proper movie playback may not be possible on some Macintosh models. If you experience problems, try the following.

Change the movie image quality setting to STD. Upgrade to the latest version of QuickTime. Shut down other applications that are running.

Even if proper playback is not possible on your Macintosh, you can use the AV cable that comes bundled with the camera to connect to the video input terminal of a TV or Macintosh and play back movies that way.

IMPORTANT!

Be sure to move the movie data to the hard disk of your Macintosh before trying to play it. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.

Transferring Images Automatically and Managing Them on Your Macintosh

Playing a Movie

Operating System : Mac OS X 10.3.9 or higher Required Software: QuickTime 7 or higher

136 Using the Camera with a Computer

You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you dont, go to the Adobe Systems Incorporated website and install Acrobat Reader.

1. On the CD-ROM, open the Manual folder.

2. Open the Digital Camera folder and then open the folder for the language whose users guide you want to view.

3. Open the file named camera_xx.pdf. xx is the language code (Example: camera_e.pdf is for English).

Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/

Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it possible to transfer image data automatically to a computer via wireless LAN.

1. Configure LAN access point, transfer destination and other settings for the Eye-Fi card in accordance with the instructions that come with the Eye-Fi card.

2. After configuring settings, load the Eye-Fi card into the camera and record. Images you record are sent by wireless LAN to your computer, etc. For full details, see the user documentation that comes with the Eye-Fi card. Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi

Manager install files to your computer. Do this before formatting the card.

Viewing User Documentation (PDF Files)

User Registration

Using an Eye-Fi Wireless SD Memory Card to Transfer Images (Eye-Fi)

137 Using the Camera with a Computer

IMPORTANT!

Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 141) when on an aircraft or in any other location where use of wireless communication is limited or prohibited.

Loading an Eye-Fi card will cause the Eye-Fi indicator to appear on the monitor screen. Its transparent or not transparent appearance indicates the communication status as shown below.

A communication icon will appear on the monitor screen while image data transfer is in progress.

The cameras Auto Power Off (page 147) function is disabled while image data transfer is in progress.

A confirmation message will appear on the monitor screen if you try to turn off the camera while image data transfer is in progress. Follow the instructions in the messages (page 173).

Transfer of a large number of images can take some time to complete. Depending on the type of Eye-Fi card you are using and its settings, images on the

Eye-Fi card may be deleted following image data transfer. When recording a movie to an Eye-Fi card, it can take too much time to record

data, which can result in breaks in the image and/or audio. Proper Eye-Fi card data communication may not be possible due to camera

settings, battery level, or operating conditions.

Transparent Access point cannot be found or no transferable image data exists.

Not transparent Image transfer in progress

Flashing Searching for access points

138 Using the Camera with a Computer

The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. For details about how folders are organized in memory, see Memory Folder

Structure (page 139).

You can view folder and file names on your computer. For details about how file names are displayed on the cameras monitor screen, see page 11.

The total number of folders and files allowed depends on the image size and quality, and capacity of the memory card being used for storage.

Files and Folders

Name and Maximum Number Allowed Example

File

Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.

26th file name:

Folders

Folders are named from 100CASIO to 999CASIO. There can be up to 900 folders in memory. The BEST SHOT (page 60) includes a sample

scene that optimizes settings for auction site images. Depending on your camera model, the sample scene is named either For eBay or Auction. Images recorded with the eBay scene are

stored in a folder named 100_EBAY. Images recorded with the Auction scene are

stored in a folder named 100_AUCT. BEST SHOT also has a scene named For

YouTube that optimizes movie settings for recording movies for upload to YouTube. Images recorded with the YouTube scene are stored in a folder named 100YOUTB.

100th folder name:

CIMG0026.JPG

Extension Serial number (4 digits)

100CASIO

Serial number (3 digits)

139 Using the Camera with a Computer

The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF).

. About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. Transferring this cameras DCF-compliant images to another manufacturers

camera and view them. Printing this cameras DCF-compliant images on another manufacturers printer. Transferring another cameras DCF-compliant images to this camera and view

them.

. Memory Folder Structure DCIM Folder Recording Folder Image File Movie File Audio File Audio Snapshot Image File Audio Snapshot Audio File Subject Image File

Recording Folder Recording Folder

DPOF File Folder DPOF File

Snapshot BEST SHOT User Setup Folder

Movie BEST SHOT User Setup Folder

Background Music Folder Background Music File Background Music File

Startup Image File

*1 Other folders are created when the following BEST SHOT scenes are used for recording: For eBay or Auction (scene name depends on camera model), or For YouTube. The following shows the name of the folder created for each scene. eBay scene: 100_EBAY Auction scene: 100_AUCT YouTube scene: 100YOUTB

*2 This folder or file can be created in built-in memory only.

Memory Card Data

DCIM 100CASIO *1

CIMG0001.JPG CIMG0002.AVI CIMG0003.WAV CIMG0004.JPG CIMG0004.WAV

101CASIO *1

102CASIO *1

MISC AUTPRINT.MRK

SCENE *2

MSCENE *2

SSBGM SSBGM001.WAV SSBGM002.WAV

STARTING.JPG *2

CIMG0005.JPE

140 Using the Camera with a Computer

. Supported Image Files Image files shot with this camera DCF-compliant image files

This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this cameras monitor screen.

. Built-in Memory and Memory Card Data Handling Precautions Whenever copying memory contents to your computer, you should copy the DCIM

folder and all of its contents. A good way to keep track of multiple DCIM copies of the DCIM folders it to change its name to a date or something similar after you copy it to your computer. If you later decided to return the folder to the camera, however, be sure to change its name back to DCIM. The camera is designed to recognize only a root file with the name DCIM. Note the camera also will not be able to recognize the folders inside the DCIM folder unless they have the names they originally had when you copied them from the camera to your computer.

Folders and files must be stored in accordance with the Memory Folder Structure shown on page 139 in order for the camera to be able to recognize them correctly.

You also can use a PC card adapter or a memory card reader/writer to access camera files directly from the cameras memory card.

A Subject Image File (CIMG****.JPE) contains special image data. Never edit a Subject Image File on your computer and transfer it back to the camera. Doing so can cause abnormal camera operation.

141 Other Settings (Set Up)

Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.

Procedure

[MENU] * Set Up Tab * Screen You can change the brightness of the monitor screen.

Procedure

[MENU] * Set Up Tab * Eye-Fi Select Off to disable Eye-Fi card communication (page 136).

For information about menu operations, see page 68.

Adjusting Monitor Screen Brightness (Screen)

Auto With this setting, the camera detects available light levels and automatically adjusts the brightness of the monitor screen accordingly.

+2 Brightness that is greater than +1, which makes the screen easier to view. This setting consumes more power.

+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.

0 Normal monitor screen brightness for indoor use, etc.

1 Screen brightness for viewing in a dark environment without disturbing others around you.

Turning off Eye-Fi Card Communication (Eye-Fi)

142 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Auto Rotate

The camera automatically detects whether a snapshot image was shot in portrait or landscape orientation and displays it accordingly. Auto rotation is not performed for movies.

Procedure

[MENU] * Set Up Tab * Sounds

Setting a volume level of 0 mutes output.

Auto Image Orientation Detection and Rotation (Auto Rotate)

On Automatically rotates snapshots shot with the camera held vertically 90 degrees.

Off Images not rotated automatically.

Configuring Camera Sound Settings (Sounds)

Startup Specifies the startup sound. Sound 1 - 5: Built-in sounds (1 through 5) Off: Sound off

Half Shutter

Shutter

Operation

Operation Specifies the sound volume. This setting is also used as the audio level during video output (page 92).

Play Specifies the volume of movie and Audio Snapshot audio output. This volume setting is not used during video output (from the USB/AV port).

=

=

143 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Startup Display the image you want to use as your startup image and then select On. The startup image does not appear when you turn on the camera by pressing [p]

(PLAY). You can specify a snapshot you recorded as the startup image, or you can use the

special startup image provided in the cameras built-in memory. If you select an audio snapshot as the startup image, the audio will not play at

startup. Formatting built-in memory (page 150) will delete the current startup image setting.

Procedure

[MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 138).

Configuring a Startup Image (Startup)

Specifying the File Name Serial Number Generation Rule (File No.)

Continue

Tells the camera to remember the last used file number. A new file will be named using the next sequential number, even if files are deleted or if a blank memory card is loaded. If a memory card is loaded and that card already has files stored on it and the largest sequential number in the existing file names is greater than the largest sequential number remembered by the camera, numbering of new files will start from the largest sequential number in the existing file names plus 1.

Reset

Restarts the serial number from 0001 whenever all files are deleted or when the memory card is replaced with a blank one. If a memory card is loaded and that card already has files stored on it, numbering of new files will start from the largest sequential number in the existing file names number plus 1.

144 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Create Folder

Images recorded with the BEST SHOT For eBay or Auction scene, and the For YouTube scene are stored in special folders. They are not stored in the folder you create here.

Deleting all of the files in a folder cause the folder to be deleted as well.

Procedure

[MENU] * Set Up Tab * World Time You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe.

1. Use [8] and [2] to select World and then press [6]. To change the geographic area and city for the time where you normally use

the camera, select Home.

2. Use [8] and [2] to select City and then press [6]. To change the World setting to summer time, use [8] and [2] to select

DST and then select On. Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months.

3. Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET].

4. Use [8] and [2] to select the city you want and then press [SET].

5. Press [SET].

IMPORTANT!

Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera. If it isnt, select Home on the screen in step 1 and configure the Home City, date, and time settings as required (page 145).

Creating an Image Storage Folder (Create Folder)

Create Folder Creates a folder with a unique number (page 138). Files will be stored in the new folder starting from when you record your next image.

Cancel Cancels folder creation.

Configuring World Time Settings (World Time)

145 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. Once date and time information is stamped into a snapshot, it cannot be edited or

deleted.

Example: July, 10, 2012, 1:25 p.m.

Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function or some printing application (page 119).

Digital zoom is disabled while time stamping is turned on. Time stamping is disabled when certain BEST SHOT scenes are being used.

Procedure

[MENU] * Set Up Tab * Adjust

When the date and time settings are what you want, press [SET] to apply them. You can specify a date from 2001 to 2049. Be sure to select your Home City (page 144) before setting the time and date. If

you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 144) will be wrong.

Time Stamping Snapshots (Timestamp)

Date 2012/7/10

Date&Time 2012/7/10 1:25pm

Off No stamping of date and/or time

Setting the Cameras Clock (Adjust)

[8] [2] Change the setting at the cursor location

[4] [6] Move the cursor between settings

[0] (Movie) Toggles between 12-hour and 24-hour format

146 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Date Style You can select from among three different styles for the date.

Example: July, 10, 2012

This setting also affects the Control Panel date format as shown below (page 33). YY/MM/DD or MM/DD/YY: MM/DD DD/MM/YY: DD/MM

Procedure

[MENU] * Set Up Tab * Language

. Specify the display language you want. 1Select the tab on the right. 2Select Language. 3Select the language you want. Camera models sold in certain geographic areas

may not support display language selection.

Specifying the Date Style (Date Style)

YY/MM/DD 12/7/10

DD/MM/YY 10/7/12

MM/DD/YY 7/10/12

Specifying the Display Language (Language)

1

23

147 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time. Press any button to turn the monitor screen back on.

Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while Off is selected.) Sleep is disabled under any of the following conditions.

In the PLAY mode While the camera is connected to a computer or other device During a slideshow During Auto Shutter standby During Tracking During Voice Recording playback or recording During movie recording and playback

When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.

Procedure

[MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time.

Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) Auto Power Off is disabled under any of the following conditions.

While the camera is connected to a computer or other device During a slideshow During Tracking During Voice Recording playback or recording During movie recording and playback

Configuring Sleep State Settings (Sleep)

Configuring Auto Power Settings (Auto Power Off)

148 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * REC/PLAY

With Power On/Off, the camera turns off when you press [r] (REC) in the REC mode or [p] (PLAY) in the PLAY mode.

Change this setting to anything besides Disable before connecting to a TV for image viewing.

Procedure

[MENU] * Set Up Tab * Disabled The camera will not start the image delete operation when you press [2] ( ) while Disabled is turned on. You can protect against accidental deletion of images by selecting On for Disabled. Performing a format operation (page 150) will cause all images to be deleted, even

if file deletion is disabled (On selected for Disabled) for some images.

Configuring [r] and [p] Settings (REC/PLAY)

Power On Camera turns on whenever [r] (REC) or [p] (PLAY) is pressed.

Power On/Off Camera turns on or off whenever [r] (REC) or [p] (PLAY) is pressed.

Disable Camera does not turn on or off whenever [r] (REC) or [p] (PLAY) is pressed.

Disabling File Deletion ( Disabled)

B

149 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device.

Procedure

[MENU] * Set Up Tab * Video Out You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9.

Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use. Images will not display correctly if you select the wrong aspect ratio.

Images will not display correctly unless the cameras video signal output setting matches the video signal system of the TV or other video equipment.

Images cannot be displayed correctly on a TV or video equipment that is not NTSC or PAL.

Configuring USB Protocol Settings (USB)

Mass Storage

Select this setting when connecting to a computer (pages 122, 133). With this setting, the computer sees the camera as an external storage device. Use this setting for normal transfer of images from the camera to a computer.

PTP (PictBridge)

Select this setting when connecting to a printer that supports PictBridge (page 115). This setting simplifies the transfer of image data to the connected device.

Selecting the Screen Aspect Ratio and Video Output System (Video Out)

NTSC Video system used in Japan, the U.S., and other countries

PAL Video system used in Europe and other areas

4:3 Normal TV screen aspect ratio

16:9 Wide screen aspect ratio

150 Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. The format operation will delete all contents on the memory card or in built-in

memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it.

Formatting built-in memory will delete the following data. Protected images BEST SHOT user setups Startup screen

Formatting a memory card will delete the following data. Protected images

Formatting will cause all images to be deleted, even if file deletion is disabled (On selected for Disabled (page 148)) for some images.

Make sure the cameras battery is sufficiently charged before starting a formatting operation. Formatting may not be performed correctly and the camera may stop operating normally if the camera powers down while formatting is in progress.

Never open the battery cover while formatting is in progress. Doing so can cause the camera to stop operating normally.

Procedure

[MENU] * Set Up Tab * Reset See page 165 for details about the cameras factory default settings. The settings below are not reset. World Time settings, clock settings, date style, screen language, video output

Formatting Built-in Memory or a Memory Card (Format)

Resetting the Camera to Factory Defaults (Reset)

B

151 Configuring Monitor Screen Settings

Configuring Monitor Screen Settings

Each press of [8] (DISP) will cycle through display settings that display or hide on- screen information and the Control Panel. You can configure separate settings for the REC mode and PLAY mode.

The Control Panel is not displayed and display information settings cannot be changed during movie recording.

Displays a histogram on the monitor screen which you can use to check the exposure of an image before you shoot it. You also can display the histogram in the PLAY mode for information about the exposure levels of images.

NOTE A centered histogram does not necessarily guarantee optimum exposure. The

recorded image may be over-exposed or under-exposed, even though its histogram is centered.

Due to the limitations of exposure compensation, you may not be able to achieve an optimum histogram configuration.

Use of the flash and certain shooting conditions can cause the histogram to indicate exposure that is different from the actual exposure of the image when it is shot.

Turning Display Information On and Off (Info)

Information on, Control Panel on

Displays setting information and the Control Panel. While A, S, or M is selected as the recording mode, the

aperture and shutter speed specified for snapshots are displayed.

Information on, Control Panel on, histogram on

Displays setting information and the Control Panel, and a histogram (page 151) on the left side of the display. Also displays the remaining movie recording time in place of the remaining snapshot capacity, as well as a movie image quality icon. While A, S, or M is selected as the recording mode, the

aperture and shutter speed specified for movies are displayed.

Information off, Control Panel off Hides setting information and the Control Panel.

Using the On-screen Histogram to Check Exposure

Histogram

Histogram

152 Configuring Monitor Screen Settings

A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. If the histogram appears too lopsided for some reason, you can use EV shift to move it left or right in order to achieve better balance. Optimum exposure can be achieved by EV shifting so the graph is as close to the center as possible. For snapshots, you can even display individual histograms for R (red), G (green), and B (blue).

Example Histograms

How to Use the Histogram

A histogram towards the left side results when the overall image is dark. A histogram that is too far to the left may result in black out of the dark areas of an image.

A histogram towards the right side results when the overall image is light. A histogram that is too far to the right may result in white out of the light areas of an image.

An overall well-balanced histogram results when the overall image is at optimal lightness.

153 Appendix

Appendix

. Avoid Use While In Motion Never use the camera to record or play back images while operating an automobile

or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident.

. Directly Viewing the Sun or Bright Light Never look at the sun or any other bright light through the cameras viewfinder.

Doing so can damage your eyesight.

. Flash Never use the flash unit in areas where flammable or explosive gas may be

present. Such conditions create the risk of fire and explosion. Never fire the flash in the direction of a person operating a motor vehicle. Doing so

can interfere with the drivers vision and creates the risk of accident. Never fire the flash too close to the eyes of the subject. Doing so creates the risk of

loss of eyesight.

. Monitor Screen Should the monitor screen ever become cracked, never touch any of the liquid

inside the monitor screen. Doing so creates the risk of skin inflammation. Should monitor screen liquid ever get into your mouth, immediately rinse your

mouth out and contact your physician. Should monitor screen liquid ever get into your eyes or onto your skin, immediately

rinse with clean water for at least 15 minutes and contact your physician.

. Connections Never plug any devices that are not specified for use with this camera into

connectors. Connecting a non-specified device creates the risk of fire and electric shock.

. Transport Never operate the camera inside of an aircraft or anywhere else where operation of

such devices is restricted. Improper use creates the risk of serious accident.

Precautions during Use

154 Appendix

. Smoke, abnormal odor, overheating, and other abnormalities Continued use of the camera while it is emitting smoke or strange odor, or while it

is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera, taking care to protect yourself against burn

injury. 3. Contact your dealer or nearest CASIO authorized service center.

. Water and Foreign Matter Water, other liquids, or foreign matter (especially metal) getting inside the camera

creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. Particular care is required when using the camera where it is raining or snowing, near the ocean or other body of water, or in a bathroom. 1. Turn off the camera. 2. Remove the battery from the camera. 3. Contact your dealer or nearest CASIO authorized service center.

. Dropping and Rough Treatment Continued use of the camera after it is damaged by dropping or other rough

treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera. 3. Contact your dealer or nearest CASIO authorized service center.

. Keep Away From Fire Never expose the camera to fire, which can cause it to explode and creates the risk

of fire and electric shock.

. Disassembly and Modification Never try to take the camera apart or modify it in any way. Doing so creates the risk

of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.

155 Appendix

. Locations To Be Avoided Never leave the camera in any of the following types of locations. Doing so creates

the risk of fire and electric shock. Areas subject to large amounts of humidity or dust Food preparation areas or other locations where oil smoke is present Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed

vehicle parked in the sun, or other areas subject to very high temperatures Never place the camera on an unstable surface, on a high shelf, etc. Doing so can

cause the camera to fall, creating the risk of personal injury.

. Backing Up Important Data Always keep backup copies of important data in camera memory by transferring it

to a computer or other storage device. Note that data can be deleted in the case of camera malfunction, repair, etc.

. Memory Protection Whenever replacing the battery, be sure to follow the correct procedure as

described in the documentation that comes with the camera. Incorrectly replacing the battery can result in corruption or loss of data in camera memory.

. Rechargeable Battery Use only the specified charger unit (BC-130L) or the specified device to charge the

battery. Attempting to charge the battery by an unauthorized means creates the risk of battery overheating, fire, and explosion.

Do not expose or immerse the battery in fresh water or salt water. Doing so can damage the battery, and cause deterioration of its performance and loss of service life.

The battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.

Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. Never use or leave the battery near open flame. Do not expose the battery to heat or fire. Never carry or store the battery together with items that can conduct electricity

(necklaces, pencil lead, etc.). Never disassemble the battery, pierce it with a needle, or expose it to strong

impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never place the battery into a microwave oven, heater, high-pressure generating device, etc.

156 Appendix

Should you ever notice leakage, strange odor, heat generation, discoloration, deformation, or any other abnormal condition while using, charging, or storing a battery, immediately remove it from the camera and keep it away from open flame.

Do not use or leave the battery under direct sunlight, in an automobile parked in the sun, or in any other area subject to high temperatures. Doing so can damage the battery, and cause deterioration of its performance and loss of service life.

If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion.

Battery fluid can damage your eyes. Should battery fluid get into your eyes accidentally, immediately rinse them with clean tap water and then consult a physician.

Be sure to read the user documentation that comes with the camera and special charger unit before using or charging the battery.

If a battery is to be used by young children, make sure that a responsible adult makes them aware of the precautions and proper handling instructions, and make sure that they handle the battery correctly.

Should fluid from a battery accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin irritation.

. Battery Life Battery continuous operation times provided in this manual represent the

approximate amount of time before the camera turns off due to low battery power when being powered by the special battery under normal temperature (23C (73F)). They do not guarantee that you will be able to achieve the indicated level of operation. Actual battery life is greatly affected by ambient temperature, battery storage conditions, the amount of time spent in storage, etc.

Leaving the camera on can run down the battery and cause the low battery warning to appear. Turn off the camera whenever you are not using it.

The low battery warning indicates that the camera is about to turn off due to low battery power. Charge the battery as soon as possible. Leaving a low or dead battery in the camera can lead to battery leakage and data corruption.

157 Appendix

. Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. Removing the battery or memory card while the camera is performing some

operation Removing the battery or memory card while the back lamp is flashing green after

turning off the camera Disconnecting the USB cable while communication is in progress Using a battery that is low Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen (page 173). Perform the action indicated by the message that appears.

. Operating Environment Operating Temperature Requirements: 0 to 40C (32 to 104F) Operating Humidity: 10 to 85% (non condensation) Do not place the camera in any of the following locations.

In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand Near an air conditioner or in other areas subjected to extreme temperature or

humidity Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration

. Condensation Sudden and extreme temperature changes, such as when the camera is moved from the outdoors on a cold winter day into a warm room, can cause water droplets called condensation to form on the interior and the exterior of the camera, which creates the risk of malfunction. To prevent condensation from forming seal the camera in a plastic bag before changing locations. Then leave the bag sealed to allow the air inside to naturally change to the same temperature as the air in the new location. After that, remove the camera from the bag and open the battery cover for a few hours.

. Lens Never apply too much force when cleaning the surface of the lens. Doing so can

scratch the lens surface and cause malfunction. You may sometimes notice some distortion in certain types of images, such as a

slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera.

158 Appendix

. Caring for your camera Never touch the lens or flash window with your fingers. Finger smudges, dirt, and

other foreign matter on the lens or flash window can interfere with proper operation of the camera. Use a blower or other means to keep the lens and flash window free of dirt and dust, and wipe gently with a soft, dry cloth.

To clean the camera, wipe it with a soft, dry cloth.

. Old Rechargeable Battery Handling Precautions Insulate the positive and negative terminals with tape, etc. Do not peel the covering off of the battery. Do not try to take the battery apart.

. Charger Unit Handling Precautions

The charger unit becomes slightly warm during charging. This is normal and does not indicate malfunction.

Unplug the power cord from the power outlet when you are not using the charger unit.

Never use detergent to clean the power cord (especially the plug). Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire.

- 0Never plug the power cord into an outlet whose voltage rating is different from

that marked on the power cord. Doing so creates the risk of fire, malfunction, and electric shock.

0Take care to protect the power cord against damage and breaking. Never place heavy objects onto the power cord, or expose it to intense heat. Doing so can damage the power cord, creating the risk of fire and electric shock.

0Never try to modify the power cord, or subject it to severe bending, twisting, or pulling. Doing so creates the risk of fire, malfunction, and electric shock.

0Never plug in or unplug the power cord while your hands are wet. Doing so creates the risk of electric shock.

0Do not plug the power cord into an outlet or extension cord that is shared by other devices. Doing so creates the risk of fire, malfunction, and electric shock.

0Should the power cord ever become damaged (to the point that internal wires are exposed or cut), immediately contact your original retailer or a CASIO authorized service center to request repair. Continued use of a damaged power cord creates the risk of fire, malfunction, and electric shock.

159 Appendix

. Other Precautions The camera becomes slightly warm during use. This is normal and does not indicate malfunction.

. Copyrights Except for your own personal enjoyment, unauthorized use of use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment. Regardless of whether such files are purchased by you or obtained for free, posting them on a website, a file sharing site, or any other Internet site, or otherwise distributing them to third parties without the permission of the copyright holder is strictly prohibited by copyright laws and international treaties. For example, uploading or distributing on the Internet images of TV programs, live concerts, music videos, etc. that were photographed or recorded by you may infringe upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.

Note that trademark and registered trademark are not use within the text of this manual. SDXC Logo is a trademark of SD-3C, LLC. Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,

Windows 7, and DirectX are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc. Adobe and Reader are trademarks or registered trademarks in the United States

and other countries of Adobe Systems Incorporated. YouTube, the YouTube logo, and Broadcast Yourself are trademarks or

registered trademarks of YouTube, LLC. EXILIM, Photo Transport, Dynamic Photo, Dynamic Photo Manager, Virtual Painter

5 LE for CASIO, and YouTube Uploader for CASIO are registered trademarks or trademarks of CASIO COMPUTER CO., LTD.

All other company or product names mentioned herein are registered trademarks or trademarks of their respective companies.

The following terms, which are used in this manual, are registered trademarks or trademarks of their respective owners.

160 Appendix

Any and all unauthorized commercial copying, distribution, and copying of the bundled software over a network are prohibited.

This product contains PrKERNELv4 Real-time OS of eSOL Co., Ltd. Copyright 2007 eSOL Co., Ltd. PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in Japan.

This product contains the software of FotoNation, Inc. FotoNation is a registered trademark of FotoNation, Inc. FaceTracker is a trademark of FotoNation, Inc.

This products YouTube upload functionality is included under license from YouTube, LLC. The presence of YouTube upload functionality in this product is not an endorsement or recommendation of the product by YouTube, LLC.

. If the chargers [CHARGE] lamp flashes red... Charging cannot be performed because ambient temperature or the temperature of

the charger is too hot or too cold. Leave the camera in a location whose temperature is within the range where charging can be performed. When the camera returns to a temperature where charging can be performed, the [CHARGE] lamp will light red.

Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them clean with a dry cloth.

Power Supply

Charging

If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center.

161 Appendix

1. Open the battery cover and remove the current battery. With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the camera.

2. Load a new battery.

. Precautions during Use Operation provided by a battery under cold conditions is always less than operation

under normal temperatures. This is due to the characteristics of the battery, not the camera.

Charge the battery in an area where the temperature is within the range of 5C to 35C (41F to 95F). Outside this temperature range charging can take longer than normal or even fail.

Do not tear or remove the battery outer label. If a battery provides only very limited operation following a full charge, it probably

means the battery has reached the end of its service life. Replace the battery with a new one.

. Storage Precautions Storing the battery for a long time while it is charged can cause deterioration of

battery characteristics. If you do not plan to use a battery for some time, fully use up its charge before storing it.

Always remove the battery from the camera when you are not using it. A battery left in the camera can discharge and go dead, which will require some time to charge when you need to use the camera.

Store batteries in a cool, dry place (20C (68F) or lower). To prevent over discharging of an unused battery, fully charge it, and then load it in

the camera and fully use up the charge about once every six months.

To replace the battery

Battery Precautions

Stopper

162 Appendix

. Precautions during Use The bundled charger is designed for operation with any power supply in the range

of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord plug depends on each country or geographic area. Before taking the camera and charger along on a trip, check with travel agent about the power supply requirements in your destination(s).

Do not connect the charger to a power supply through a voltage converter or similar device. Doing so can lead to malfunction.

. Extra Batteries Taking along extra fully charged batteries (NP-130) is recommended while on a trip

in order to avoid not being able to shoot images due to the battery going dead.

See page 19 for information about supported memory cards and how to load a memory card.

Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one. Never remove a card from the camera while the

back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card.

Using the Camera in another Country

Using a Memory Card

To replace the memory card

163 Appendix

. Using a Memory Card SD memory cards, SDHC memory cards, and SDXC

memory cards have a write protect switch. Use the switch when you need to guard against accidentally deleting data. Note, however, if you write protect an SD memory card you must then turn write protection off whenever you want to record to it, format it, or delete any of its images.

If a memory card starts to behave abnormally during image playback, you can restore normal operation by reformatting it (page 150). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office.

As you record data to and delete data from a memory card a number of times, it loses its ability to retain data. Because of this, periodic re-formatting of a memory card is recommended.

Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Make sure that you always back up important data on other media (CD-R, CD-RW, hard disk, etc.).

. Memory Card Handling Precautions Certain types of memory cards can slow down processing speeds. In particular, you may experience problems saving high-quality (HD and STD) movies. When using the cameras built-in memory or certain types of memory cards, it can take too much time to record data, which can result in breaks in the image and/or audio. This condition is indicated by and Y flashing on the monitor screen. Use of a memory card with a maximum transfer speed of at least 10MB per second is recommended.

. Discarding or Transferring Ownership of a Memory Card or the Camera

The format and delete functions of the camera do not actually delete files from the memory card. The original data remains on the card. Note that responsibility for the data on a memory card lies with you. The following procedures are recommended whenever you discard a memory card or the camera, or if you transfer ownership to another party. When discarding a memory card, either physically destroy the memory card or use

commercially available data delete software to completely delete the data on the memory card.

When transferring ownership of a memory card to another party, use commercially available data deletion software to completely delete the data on it.

Use the format function (page 150) to completely delete the data in built-in memory before discarding or transferring ownership of the camera.

Write enabled

Write disabled

164 Appendix

Computer system requirements are different for each of the applications. Be sure to check the requirements for the particular application you are trying to use. Note that the values provided here are minimum requirements for running each application. Actual requirements are greater, depending on the number of images and the sizes of the images being handled.

0Windows YouTube Uploader for CASIO

Sufficient memory to run the operating system Computer configuration that enables playback of movies on the YouTube site Computer configuration that enables upload of movies to the YouTube site

Photo Transport 1.0

Dynamic Photo Manager

Virtual Painter 5 LE for CASIO

Installation requires in as a user with Administrator privileges.

Adobe Reader 9

Computer System Requirements for Bundled Software (Bundled CD-ROM)

Operating System: Windows 7, Windows Vista, Windows XP (SP3)

Operating System : Windows 7, Windows Vista, Windows XP (SP3) Memory : At least 64MB Hard Disk Drive Space : At least 2MB

Operating System : Windows 7, Windows Vista (SP1), Windows XP (SP3) Memory : At least 512MB Hard Disk Drive Space : At least 10MB Internet Browser : Internet Explorer 6.0 or greater or equivalent function

browser Other : QuickTime 7.6 or higher and Windows Media Player 10 or

higher installed. Computer with continuous Internet connection (1Mbps or greater)

Operating System: Windows 7, Windows Vista, Windows XP (SP3) CPU : Intel Pentium III processor or later Memory : At least 256MB VIDEO : 24-bit full color display adapter at 1024x768 or larger resolution

Operating System : Windows 7, Windows Vista, Windows XP (SP3/SP2), Windows 2000 (SP4)

Memory : At least 128MB (256MB recommended) Hard Disk Drive Space : At least 335MB Other : Internet Explorer 6.0 or higher installed

165 Appendix

For details about the minimum system requirements for each software application, see the Read me files on the CASIO Digital Camera Software CD-ROM that comes bundled with the camera.

The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 150). Menu items depend on whether the camera is in the REC mode or PLAY mode. A dash () indicates an item whose setting is not reset or an item for which there is

no reset setting.

IMPORTANT!

Switching the recording mode (page 23) to Premium Auto or Silent will make some menu items unavailable.

. REC Mode

REC Tab

Reset Initial Default Settings

Focus Q (Auto Focus)

CS Off

Self-timer Off

Auto Shutter Off

Face Detection Off

Continuous AF Off

Anti Shake On

AF Area Spot

AF Assist Light On

Digital Zoom On

Grid Off

Review On

Icon Help On

Memory

Effect: Off / Auto Shutter: Off / Flash: On / Focus: Off / White Balance: Off / ISO: Off / EV Shift: Off / AF Area: On / Metering: Off / CS: Off / Self-timer: Off / Flash Intensity: Off / Single SR Quality: On / Single SR Zoom: On / Digital Zoom: On / MF Position: Off / Zoom Position: Off

166 Appendix

Quality Tab

Set Up Tab

Single SR Quality Off

Single SR Zoom On

Size 16M (4608x3456)

Quality (Snapshots) Normal

Quality (Movies) HD

Effect Off

EV Shift 0.0

T

White Balance Auto

ISO Auto

Metering B Multi

Lighting On

Color Filter Off

Sharpness 0

Saturation 0

Contrast 0

Flash Intensity 0

Screen Auto

Eye-Fi On

Auto Rotate On

Sounds

Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Operation: Sound 1 / =Operation: ...//// / =Play: ...////

Startup Off

File No. Continue

Create Folder

World Time

Timestamp Off

Adjust

Date Style

Language

Sleep 1 min

Auto Power Off 2 min

REC/PLAY Power On

Disabled Off

USB Mass Storage

Video Out

Format

Reset

B

167 Appendix

. PLAY Mode PLAY Tab

Set Up Tab The contents of the Set Up tab are the same in the REC mode and PLAY mode.

Slideshow

Images: All images / Time: 30 min / Interval: 3 sec / Effect: Pattern 1

Dynamic Photo

Movie Converter

MOTION PRINT Create

Movie Editing

Lighting

Red Eye

White Balance

Brightness 0

Keystone

Color Correction

DPOF Printing

Protect

Date/Time

Rotation

Resize

Trimming

Dubbing

Copy

Divide Group

168 Appendix

When things dont go right...

Troubleshooting

Problem Possible Cause and Recommended Action Power Supply

Power does not turn on.

1)The battery may not be loaded correctly (page 15). 2)The battery may be dead. Charge the battery (page 14). If the

battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-130 rechargeable lithium ion battery.

The camera suddenly powers down.

1)Auto Power Off may have activated (page 147). Turn power back on.

2)The battery may be dead. Charge the battery (page 14). 3)The cameras protection function may have activated

because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again.

Power will not turn off. Nothing happens when a button is pressed.

Remove the battery from the camera and then reload it.

Image Recording Image is not recorded when the shutter button is pressed.

1)If the camera is in the PLAY mode, press [r] (REC) to enter the REC mode.

2)If the flash is charging, wait until the charge operation finishes.

3)If the message Memory Full appears, transfer images to your computer, delete images you no longer need, or use a different memory card.

Auto Focus does not focus properly.

1)If the lens is dirty, clean it off. 2)The subject may not be in the center of the focus frame when

you compose the image. 3)The subject you are shooting may not be a type that is

compatible with Auto Focus (page 30). Use manual focus (page 39).

4)You may be moving the camera when shooting. Try shooting with Anti Shake or use a tripod.

5)You may be pressing the shutter button all the way without waiting for Auto Focus. Half-press the shutter button and allow enough time for Auto Focus to focus.

169 Appendix

The subject is out of focus in the recorded image.

The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame.

The flash does not fire.

1)If ? (Flash Off) is selected as the flash mode, change to another mode (page 37).

2)If the battery is dead, charge it (page 14). 3)If a BEST SHOT scene that uses ? (Flash Off) is selected,

change to a different flash mode (page 37) or select a different BEST SHOT scene (page 60).

The ? (Flash Off) icon flashes red on the monitor screen and the flash does not fire.

The flash unit may be malfunctioning. Contact a CASIO authorized service center or your original retailer. Note that though the flash will not fire, you still can use the camera for non-flash shots.

Camera powers down during Self- timer countdown.

The battery may be dead. Charge the battery (page 14).

The monitor screen image is out of focus.

1)You may be using Manual Focus and have not focused the image. Focus the image (page 39).

2)You may be using (Macro) for scenery or portraits. Use Auto Focus for scenery and portrait shots (page 39).

3)You may be trying to use Auto Focus or ) (Infinity) when shooting a close-up shot. Use the (Macro) for close ups (page 39).

There is a vertical line in the monitor screen image.

Shooting a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is a CCD phenomenon known as vertical smear, and does not indicate malfunction of the camera. Note that vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a movie.

There is digital noise in images.

1)Sensitivity may have been increased automatically for a dark subject, which increases the chance of digital noise. Use a light or some other means to illuminate the subject.

2)You may be attempting to shoot in a dark location with ? (Flash Off) selected, which can increase digital noise and make images appear coarse. In this case, turn on flash (page 37) or use lights for illumination.

3)Shooting with a high ISO sensitivity setting or with the Lighting feature can cause an increase in digital noise. Use a light or some other means to illuminate the subject.

Problem Possible Cause and Recommended Action

170 Appendix

A recorded image was not saved.

1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 16).

2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete.

Though available lighting is bright, the faces of people in the image are dark.

Not enough light is reaching the subjects. Change the flash mode setting to < (Flash On) for daylight synchro flash (page 37), or adjust EV shift to the + side (page 47).

Night shots come out bad.

Use the following BEST SHOT scenes (page 60) when shooting at night. Night Scene (for shooting night scenery only) Night Scene Portrait (for shooting people against night

scenery)

Subjects are too dark when shooting images in a seashore or ski area.

Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode setting to < (Flash On) for daylight synchro flash (page 37), or adjust EV shift to the + side (page 47).

The focus frame does not appear on the monitor screen.

Normally, turning off the camera while Detect Smile is selected for Auto Shutter will cause the cameras face detection setting to change. You will need to change the face detection setting again after turn on the camera. You can tell the camera to remember the Auto Shutter setting by selecting On for the Auto Shutter power on default setting (page 77).

Digital zoom (including HD zoom and Single SR Zoom) does not work. The zoom bar indicates zoom only up to a zoom factor of 12.5.

1)The digital zoom setting may be turned off. Turn on digital zoom (page 75).

2)Date stamping may be turned on, which will cause digital zoom to be disabled. Turn off date stamping (page 145).

3)Digital zoom is disabled when some BEST SHOT scenes (Business cards and documents, White board, etc.) are selected. Select another scene (page 60).

Problem Possible Cause and Recommended Action

171 Appendix

When shooting with Auto Shutter, the shutter does not trigger.

Auto Shutter may not trigger when shooting under very bright or very dark conditions, or when shooting a fast moving subject, etc. If this happens, try changing the Auto Shutter Trigger Sensitivity setting (page 73), or press the shutter button all the way down to release the shutter and shoot the image.

The image is out of focus during movie recording.

1)Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range.

2)The lens may be dirty. Clean the lens (page 157).

Playback The color of the playback image is different from what appears on the monitor screen when shooting.

Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens.

Images are not displayed.

This camera cannot display non-DCF images recorded onto a memory card using another digital camera.

Images cannot be edited (with resizing, trimming, keystone correction, color restoration, date/ time editing, rotation).

1)Note that you cannot edit the following types of snapshots. Snapshots created using MOTION PRINT Movies Snapshots recorded with another camera 2)With keystone correction and color restoration, editing is not

possible if the camera cannot find a shape to edit within the frame on the monitor screen (pages 101, 102).

File Deletion A file cannot be deleted.

1)The file may be protected. Unprotect the file (page 103). 2) Disabled setting may be On. Change the setting to

Off (page 148).

Problem Possible Cause and Recommended Action

172 Appendix

Other The wrong date and time are displayed, or the wrong date and time are being stored along with image data.

The date and time setting is off. Set the correct date and time (page 145).

The messages on the display are in the wrong language.

The wrong display language is selected. Change the display language setting (page 146).

Images cannot be transferred over a USB connection.

1)The USB cable may not be connected securely. Check all connections.

2)The wrong USB communication protocol is selected. Select the correct USB communication protocol in accordance with the type of device you are connecting (pages 122, 132).

3)If the camera is not turned on, turn it on. 4)Your computer may not be able to recognize the camera if

you connect via a USB hub. Always connect directly to the computers USB port.

Language selection screen appears when the camera is turned on.

1)You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery. Check the camera setup (pages 16, 18).

2)There may be a problem with the cameras memory data. If this is the case, perform the reset operation to initialize the cameras setup (page 150). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the cameras memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center.

Problem Possible Cause and Recommended Action

173 Appendix

The time and date settings configured the first time after purchasing the camera are reset to their factory defaults when remove the cameras battery.

Load the cameras battery and reconfigure the time and date settings (page 18). Do not remove the battery from the camera for at least 24 hours after configuring time and date settings. After that, the settings will not be reset if you remove the battery. If the time and date are reset to their factory default settings

when you remove the battery after it has been loaded for more than 24 hours, it could mean that the cameras setting memory is defective. Contact your retailer or a CASIO authorized service center.

Buttons are not responsive right after the power has been turned on.

With large capacity memory cards there is a delay after the power has been turned on before the buttons become responsive.

Display Messages

ALERT

The cameras protection function may have activated because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again.

Battery is low. Battery power is low.

Cannot correct image!

Keystone correction of the image cannot be performed for some reason. The image will be stored as-is, without correction (page 65).

Cannot find the file.

The image you specified with the slideshow Images setting cannot be found. Change the Images setting (page 94) and try again.

Cannot register any more files.

You are attempting to save a user BEST SHOT scene in the SCENE folder when the folder already contains 999 user scenes (page 63).

Card ERROR

There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 150).

IMPORTANT!

Formatting a memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device.

Problem Possible Cause and Recommended Action

174 Appendix

Check connections!

You are attempting to connect the camera to a printer while the cameras USB settings are not compatible with the USB system of the printer (page 115).

Files could not be saved because battery is low.

Battery power is low, so an image file could not be saved.

Folder cannot be created.

You are trying to record a file while there are already 9999 files stored in the 999th folder. If you want to record more, delete files you no longer need (page 28).

Images are being transferred. Stop transfer and turn off power?

You are attempting to turn off power while image data is being transferred using the Eye-Fi card (page 136).

LENS ERROR

This message appears and the camera turns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact a CASIO authorized service center or your original retailer.

LENS ERROR 2 The Camera Shake unit may be malfunctioning. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center.

Load paper! The printer ran out of paper while printing.

Memory Full Memory is full with images you recorded and/or files saved by editing operations. Delete files you no longer need (page 28).

No subjects in memory. Use the BS Dynamic Photo to shoot a subject.

There is no extracted subject in camera memory that can be inserted into a background image.

Printing Error An error occurred while printing. The printer is turned off. The printer generated an error, etc.

Record Error Image compression could not be performed for some reason during image data storage. Shoot the image again.

175 Appendix

RETRY POWER ON

The lens came into contact with an obstruction while moving. The camera will turn off automatically when this message appears. Remove the obstruction and turn power back on again.

SYSTEM ERROR Your camera system is corrupted. Contact your retailer or a CASIO authorized service center.

The card is locked.

The LOCK switch of the SD, SDHC, or SDXC memory card loaded in the camera is in the locked position. You cannot store images to or delete images from a memory card that is locked.

There are no files. There are no files in built-in memory or on the memory card.

There are no printing images. Set up DPOF.

There are currently no files specified for printing. Configure the required DPOF settings (page 117).

There is no image to register.

The setup you are trying to save is for an image that cannot be saved as a user BEST SHOT scene.

This card is not formatted.

The memory card loaded in the camera is not formatted. Format the memory card (page 150).

This file cannot be played.

The file you are trying to access is corrupted or is a type that cannot be displayed by this camera.

This function cannot be used.

This message will appear part way through an operation when you attempt to use a function that is not allowed in combination with another function.

LOCK

176 Appendix

Snapshot

Number of Snapshots/Movie Recording Time/ Voice Recording Time

Image Size (Pixels) Image Quality

Approximate Image File

Size

Built-in Memory (Approx. 34.9MB*1)

Snapshot Recording Capacity

SD Memory Card (1GB*2) Snapshot

Recording Capacity

16M (4608x3456)

Fine 10.71 MB 3 90

Normal 5.57 MB 6 173

3:2 (4608x3072)

Fine 9.43 MB 3 102

Normal 4.92 MB 7 196

16:9 (4608x2592)

Fine 7.83 MB 4 123

Normal 4.10 MB 8 235

10M (3648x2736)

Fine 6.4 MB 5 151

Normal 3.38 MB 10 286

5M (2560x1920)

Fine 2.99 MB 11 323

Normal 1.72 MB 20 561

3M (2048x1536)

Fine 2.0 MB 17 483

Normal 1.25 MB 27 772

VGA (640x480)

Fine 430 KB 78 2244

Normal 290 KB 115 3327

177 Appendix

Movies

Voice Recording

*1 Built-in memory capacity after formatting *2 The above values are based on use of a PRO HIGH SPEED SD memory card

(Panasonic Corporation). The number of images you can save depends on the type of memory card you are using.

Snapshot, movie recording capacity, and voice recording capacity values are approximate and intended for reference only. Actual capacity depends on image contents.

File size and data rate values are approximate and intended for reference only. Actual values depend on the type of image being shot.

When using a memory card with a different capacity, calculate the number of images as a percentage of 1GB.

Each movie can be up to 29 minutes long. Movie recording stops automatically after 29 minutes of recording.

A single movie shoot with the For YouTube scene can have a maximum file size of 2048MB or a recording time of up to 15 minutes.

Image Quality (Pixels)

Approximate Data Rate (Frame Rate)

Built-in Memory (Approx. 34.9MB*1)

Movie Recording Capacity

SD Memory Card (1GB*2) Movie

Recording Capacity

File Size of 1-minute

Movie

HD 1280x720

19.2 Megabits/second (24 frames/second) 13 seconds 6 minutes

52 seconds 144 MB

STD 640x480

12.2 Megabits/second (30 frames/second) 20 seconds 10 minutes

49 seconds 91.5 MB

File Format Maximum File Size File Size

Built-in Memory (Approx. 34.9MB*1)

Voice Recording Capacity

SD Memory Card (1GB*2) Voice

Recording Capacity

WAV IMA-ADPCM 4 GB 5.5 KB/seconds 1 hour

49 minutes 49 hours

33 minutes

178 Appendix

Specifications

File Format Snapshots: JPEG (Exif Version 2.3); DCF 2.0 standard; DPOF compliant

Movies: Motion JPEG AVI, IMA-ADPCM audio (monaural)

Audio (Voice Recording): WAV (monaural)

Recording Media Built-in Memory (Image Storage Area: 34.9MB*) SD/SDHC/SDXC * Built-in memory capacity after formatting

Recorded Image Sizes Snapshot: 16M (4608x3456), 3:2 (4608x3072), 16:9 (4608x2592), 10M (3648x2736), 5M (2560x1920), 3M (2048x1536), VGA (640x480)

Movies: HD (1280x720), STD (640x480)

Image Deletion 1 file; selected files; all files (with memory protection feature)

Effective Pixels 16.10 Megapixels

Imaging Element Size: 1/2.3-inch square pixel CCD Total Pixels: 16.57 Megapixels

Lens/Focal Distance F3.0 (W) to 5.9 (T) f = 4.24 to 53.0 mm (equivalent to 24 to 300 mm in 35 mm format) Nine lenses in eight groups, including aspherical lens.

Zoom 12.5X Optical zoom, 18.8X in combination with Single SR Zoom 4X Digital zoom Up to 199.3X when HD Zoom and Digital zoom are used in combination (VGA size)

Focusing Contrast Detection Auto Focus Focus Modes:

Auto Focus, Macro Focus, Super Macro Focus, Infinity, Manual Focus

AF Area: Intelligent, Spot, Multi, Tracking; with AF assist lamp

Approximate Focus (Snapshot) (From Lens Surface)

Auto Focus: 5 cm to 9 (2.0" to 9) (Wide Angle) Macro Focus: 1 cm to 50 cm (0.4" to 19.7") (Fifth step zoom from the Widest Angle setting) Super Macro Focus: 1 cm to 50 cm (0.4" to 19.7") Infinity: 9 Manual: 5 cm to 9 (2.0" to 9) (Wide Angle) * Range is affected by optical zoom.

Metering Multi-pattern, center weighted, and spot by imaging element

Exposure Control Program AE

179 Appendix

Exposure Compensation

2.0 EV to +2.0 EV (in 1/3EV steps)

Shutter CCD shutter, mechanical shutter

Shutter Speed Snapshot (Auto): 1/2 to 1/2000 second Snapshot (Aperture Priority AE): 1 to 1/2000 second Snapshot (Shutter Speed Priority AE/Manual Exposure): 8 to 1/2000 second Snapshot (Night Scene): 4 to 1/2000 second * May differ due to the camera setup.

Aperture Value F3.0 (W) to F7.9 (W) (When used with ND filter) * Using optical zoom changes the aperture value.

White Balance Auto, Daylight, Overcast, Shade, Day White Fluorescent, Daylight Fluorescent, Tungsten, Manual WB

Sensitivity (Standard Output Sensitivity, Recommended Exposure Index)

Snapshots: Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 equivalent

Movies: Auto

Self-timer Approximate Trigger Times: 10 seconds, 2 seconds, Triple Self-timer

Flash Modes Auto, Off, On, Red-eye reduction

Flash Range (ISO Sensitivity: Auto)

Normal: 0.3 m to 4.7 m (0.98' to 15.4') (Wide Angle) 0.9 m to 2.4 m (3.0' to 7.9') (Telephoto)

Flash CS: 0.3 m to 1.9 m (0.98' to 6.2') (Wide Angle) 0.9 m to 1.0 m (3.0' to 3.3') (Telephoto)

* Range is affected by optical zoom.

Flash Charging Time Approximately 5 seconds maximum

Recording Snapshots (Auto/Premium Auto); Single SR Quality; Single SR Zoom; Macro; Self-timer; Continuous Shutter (CS: 4fps/10fps/ Flash); BEST SHOT; Make-up; Landscape; Auto Shutter; Face Detection; Dynamic Photo; Movies (HD movie, Prerecord Movie, and For YouTube) (with monaural audio); Audio (Voice Recording)

Approximate Maximum Audio Recording Times

After Recording: 30 seconds per image Voice Recording: 1 hour 49 minutes (when using built-in memory)

Monitor Screen 3.0-inch TFT color LCD (Super Clear LCD) 460,800 (960x480) dots

Viewfinder Monitor Screen

Timekeeping Function Built-in quartz digital clock Date and Time: Recorded with image data Auto Calendar: To 2049

World Time 162 cities in 32 time zones City name, date, time, summer time

180 Appendix

Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23C (73F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.

Battery: NP-130 (Rated Capacity: 1800 mAh) Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic

Corporation)) Measurement Conditions *1 Approximate number of shots (CIPA) (Operating Time)

In accordance with CIPA (Camera and Imaging Products Association) standards Normal temperature (23C (73F)), monitor on, zoom operation between full wide and full telephoto every 30 seconds, during which two images are shot with flash; power turned off and back on every time 10 images are shot.

*2 Approximate playback time Standard temperature (23C (73F)), one-image scroll approximately every 10 seconds

*3 Approximate time using a 16GB SDHC memory card for a repeated cycle of 10 minutes recording followed by deletion of the recorded file.

*4 Approximate continuous recording time

The above values are based a new battery, starting from a full charge. Repeated charging shortens battery life.

Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on greatly affects recording time and number of shots values.

External connection terminal

USB port (Hi-Speed USB compatible) / AV output terminal (NTSC/PAL)

Microphone Monaural

Speaker Monaural

Power Requirements Rechargeable lithium ion battery (NP-130) x1

Number of Shots (CIPA) (Operating Time)*1 1000 shots

Continuous Playback (Snapshots)*2 8 hours 20 minutes

Approximate continuous movie recording time*3 6 hours 20 minutes

Continuous Voice Recording*4 17 hours 30 minutes

Power Consumption 3.7 V DC, Approximately 4.1 W

Dimensions 104.8 (W) x 59.1 (H) x 28.6 (D) mm (4.1" (W) x 2.3" (H) x 1.1" (D)) (24.2 mm (0.95") thick excluding projections)

Weight 201 g (7.1 oz) (including battery and memory card) 161 g (5.7 oz) (excluding battery and memory card)

181 Appendix

. Rechargeable lithium ion battery (NP-130)

. Charger unit (BC-130L)

Power cord precautions for use in Singapore The power cord set is not supplied. The power cord used must comply with relevant national and/or international standards.

Rated Voltage 3.7 V

Rated Capacitance 1800 mAh

Operating Temperature Requirements

0 to 40C (32 to 104F)

Dimensions 37.8 (W) x 44.8 (H) x 11.2 (D) mm (1.49" (W) x 1.76" (H) x 0.44" (D)) (excluding projections)

Weight Approximately 38 g (1.3 oz)

Input Power 100 to 240 V AC, 200 mA, 50/60 Hz

Output Power 4.2 V DC, 800 mA

Operating Temperature Requirements

5 to 35C (41 to 95F)

Supported Battery Type Rechargeable lithium ion battery (NP-130)

Charging Time 240 minutes

Dimensions 60 (W) x 24 (H) x 88 (D) mm (2.4" (W) x 0.94" (H) x 3.5" (D)) (excluding projections)

Weight Approximately 66 g (2.3 oz)

CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome

Shibuya-ku, Tokyo 151-8543, Japan

MA1103-BM29

fl

For a wealth of information about Dynamic Photo including explanations about how to use Dynamic Photo images, the Dynamic Studio image conversion service, sample images, and more, visit the special Dynamic Photo website at:

This manual provides an introduction to Dynamic Photo, which creates a whole new way to enjoy digital imaging. All screen shots shown in this manual are in English. However, the camera allows

you to select another display language, if you want.

http://dp.exilim.com/

Getting the Most Out of Dynamic Photo

Contents Dynamic Photo! A totally new way to enjoy digital photography!........................... 2

Dynamic Photo Technology ................................................................................................. 2 Using the Dynamic Photo Extracted Sample Subjects............................................. 3

Step 1: Shoot the image into which you want to insert an extracted sample subject. ......... 3 Step 2: Perform the following procedure to create a Dynamic Photo image. ...................... 3

Creating a Dynamic Photo Image ............................................................................... 5 Step 1: Shoot the subject..................................................................................................... 5 Step 2: Create the Dynamic Photo image............................................................................ 7 . Four Tips for Good Subject Cropping ......................................................................................9 . Specifying the Subject Type and CS Speed..........................................................................10 . Changing the Number of Shots Setting...............................................................................11 . Extracting Text from an Image...............................................................................................12

Step 3: Have fun with Dynamic Photo. .............................................................................. 13 Step 4: Converting a Dynamic Photo Still Image to a Movie (Movie Converter)................ 13 Step 5: Use Dynamic Studio to expand use of Dynamic Photo images to other applications. ...... 14

E

2 Dynamic Photo! A totally new way to enjoy digital photography!

Dynamic Photo! A totally new way to enjoy digital photography!

Dynamic Photo makes it easy to crop a moving subject out of a series of images and insert it into other images! A simple operation on the camera extracts a moving subject automatically by cropping up to 20 Continuous Shutter images. Become the star of your digital images! Create the images of your dreams! All on the camera, without using a computer! With Dynamic Photo you can shoot, create, and view images, just about anywhere!

Dynamic Photo lets you extract a moving subject from a series of Continuous Shutter (CS) images and insert it into another image (snapshot or movie). This makes it possible to combine images in ways that create exciting, totally unbelievable scenes.

You can create a Dynamic Photo image by inserting a moving subject into a background image. Before performing the following steps, you should record the background image into which you want to insert the moving subject.

Dynamic Photo Technology

Moving CS Images Extract the subject. Insert it into another image.

Background Image Moving Subject Dynamic Photo Image

3 Using the Dynamic Photo Extracted Sample Subjects

Using the Dynamic Photo Extracted Sample Subjects

Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjects to practice creating Dynamic Photo images by inserting them into your original snapshots or movies.

1. Remove the memory card from the camera (if one is loaded). You will not be able to access the extracted sample subjects in built-in camera memory while a memory card is loaded in the camera.

2. In the REC mode, compose the image and press the shutter button to shoot a standard snapshot. You will insert the extracted sample subject into the snapshot you shoot here.

1. Press [p] to enter the PLAY mode.

2. Perform the following operation on the camera [MENU] * PLAY tab * Dynamic Photo.

3. Use [4] and [6] to select the snapshot you shot in Step 1 above, and then press [SET].

4. Use [4] and [6] to select the extracted sample subject in built-in camera memory that you want to insert into the image and then press [SET].

5. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET]. This inserts the extracted sample subject into another image and creates a Dynamic Photo image.

Step 1: Shoot the image into which you want to insert an extracted sample subject.

Step 2: Perform the following procedure to create a Dynamic Photo image.

4 Using the Dynamic Photo Extracted Sample Subjects

6. After creation of the Dynamic Photo image is complete, the finished image with the inserted moving subject will appear on the monitor screen. After you master the above procedure using extracted sample subjects, you will be ready to create your own extracted subjects and insert them into snapshots or movies for totally original Dynamic Photo images.

You will not be able to access the extracted sample subjects in built-in camera memory while a memory card is loaded in the camera. If you want to use the extracted sample subjects while a memory card is loaded in the camera, use the Built-in * Card copy operation to copy the extracted sample subjects from built-in camera memory to the memory card.

Performing a delete or format operation will not delete the extracted sample subjects in built-in camera memory.

Note that the extracted sample subjects include some subjects that cannot be created using the Dynamic Photo feature of this camera.

Important!

5 Creating a Dynamic Photo Image

Creating a Dynamic Photo Image

Dynamic Photo images are created by extracting the subject out of one image, and inserting it into another image (snapshot or movie). The term subject as used here refers to what you extract or crop out of the first image. Perform the following steps to shoot and extract the subject.

1. Turn on the camera and display the BEST SHOT scene menu screen.

2. Select Dynamic Photo. On the BEST SHOT scene menu screen, select Dynamic Photo. Use [4] and [6] to move the red frame to and then press the [SET] button.

Step 1: Shoot the subject.

To extract the subject, you shoot once with the subject against a background. Then you shoot the same background again, this time without the subject.

1With the subject 2 The same angle against the same background, without the subject. Do not allow the camera to move.

The camera will extract the subject automatically.

(Shoot twice.)

6 Creating a Dynamic Photo Image

3. First, shoot the subject. Best results can be obtained with the camera secured on a tripod. With the camera pointed at the moving subject, press the shutter button to record. If you selected Moving Subject, the camera will record a series of Continuous Shutter (CS) images over a few seconds. To help ensure good cropping results... *See Four Tips for Good Subject Cropping.

You can select the subject type and the Number of Shots setting here by pressing the [SET] button. *See Specifying the Subject Type and CS Speed *See Changing the Number of Shots Setting *See Extracting Text from an Image for more

information. Flash is turned off (?) automatically when shooting with Dynamic Photo.

4. Next, shoot the same background again, but this time without the subject. After shooting the first image with the subject, have the subject exit the frame. Keep the camera still so you can maintain the same background composition as the first image (with the subject). When everything is ready, press the shutter button. Only one shot (not CS images) of the background is recorded at this time.

As shown in the image to the right, there is no need to carefully compose the two images when shooting against a flat wall that has no visible marks at all.

First, lets just have the subject wave or perform some other simple movement as we shoot.

7 Creating a Dynamic Photo Image

The camera compares the images you shot in steps 3 and 4 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected Moving Subject, the 20 subject images that were recorded will scroll on the screen, creating the illusion of movement. The background you shoot is not saved. Only the 20 cropped subject images are

saved.

Use the following procedure to insert the subject you extracted in Step 1 above into a snapshot or movie (new background image) and create the final Dynamic Photo image.

1. Press [p] to enter the PLAY mode.

2. Perform the following operation on the camera [MENU] * PLAY tab * Dynamic Photo.

3. Use [4] and [6] to select the background image you want and then press [SET]. Select the image you want to use as the background. You should record the background image you want to use before starting this procedure. * Only images that are able to be used as background images

will appear at this time. Only an image that satisfies the following conditions can be used as a

background image. A snapshot or movie recorded with this camera or a snapshot transferred to

this cameras memory using Photo Transport A snapshot with an aspect ratio of 4:3

Complete!

Step 2: Create the Dynamic Photo image.

8 Creating a Dynamic Photo Image

4. Use [4] and [6] to select the subject you want to insert and then press [SET]. * Only subjects that can be inserted into other images will

appear at this time.

5. If you are inserting a subject into a movie an image will appear on the monitor screen showing the approximate location of the subject in the movie. Use [4] and [6] to shift the location to the position you want. After you are finished, press [SET]. If you insert a subject into a movie, the resulting

movie will be a maximum of 20 seconds long. Everything before and after the insertion is cut off. If the movie you are inserting into (original movie) is shorter than 20 seconds, the resulting movie will be the same length as the original movie.

If you are inserting a subject into a snapshot, skip directly to step 6.

6. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET]. This inserts the subject into another image and creates a Dynamic Photo.

7. After creation of the Dynamic Photo image is complete, the finished image with the moving subject will appear on the monitor screen.

Inserting an animated subject into a snapshot will save a Dynamic Photo that consists of 20 still images of 2M size or smaller.

Inserting a stationary subject into a snapshot will save a single still image of 6M size or smaller.

Inserting a subject into a movie will save the Dynamic Photo as a movie file.

Complete!

Insert location

9 Creating a Dynamic Photo Image

Four Tips for Good Subject Cropping

When shooting the subject image, shoot against a white wall or some other surface whose color is different from that of the subject. The camera will not be able to crop the subject image properly if its color is the same as or similar to the background color.

Select a blank wall for the subject background, not one with a complex pattern or shapes. Find a blank wall whose

color is different from that of the subject.

Look for a flat wall that has no markings.

Find some reference points and use a tripod.

Best cropping results are obtained when the background is a wall that is completely free of visible markings like the one shown above. In this case, it is not necessary to take pains to position the camera correctly when shooting the second (background only) image required by Dynamic Photo. When shooting against a blank wall, you can move the camera around as much as you like while shooting CS images of a moving subject. For this type of background, you can select 1 for the Number of Shots setting. For details see Changing the Number of Shots Setting (page 11).

When there are reference points in the image as shown above, you need to compose the second (background only) image precisely according to the reference points. In this case, you will need to keep the camera as still as possible when shooting the first image (subject and background) and the second image (background only). Use a tripod whenever possible, and make sure that image is composed exactly the same for both the first image and the second image.

Shooting Technique 1

Shooting Technique 2

Recommended!!

10 Creating a Dynamic Photo Image

Move the subject away from the wall to avoid shadows! The camera may mistake shadows on the wall or floor caused by strong sunlight, illumination, or other light sources as part of the subject. Shadows tend to form when the subject is too close to a wall. Have the subject move as far away as possible from the wall.

Do not use a moving background! Good cropping is not possible if anything besides the subject is moving in the images. For example, avoid breaking waves, trees blowing in the wind, etc.

You can select from among the four subject types listed below. You also can specify a stationary subject (one frame only) in addition to a moving subject. Perform the following procedure when you want to change the subject type.

1. Before shooting the subject in step 3 under Step 1: Shoot the subject. (page 6), press [SET].

2. Use [8] and [2] to select Subject Type and then press [SET].

3. Use [8] and [2] to select the subject type you want and then press [SET].

Specifying the Subject Type and CS Speed

11 Creating a Dynamic Photo Image

Normally you need to shoot the subject you want to extract against a background and then shoot the background again without the subject. When the subject is against a plain background, however, you can extract the subject after shooting only once. Perform the following procedure when you want to change the Number of Shots setting.

1. Before shooting the subject in step 3 under Step 1: Shoot the subject. (page 6), press [SET].

2. Use [8] and [2] to select Number of Shots and then press [SET].

3. Use [8] and [2] to select the Number of Shots you want and then press [SET].

CS speed Number of images Subject type

Moving Subject 1sec (18fps)

18 frames per second 20 images Creates a moving subject from the

CS images. The subject is cropped out of

each of the CS images. Moving Subject 1sec (20fps)

provides smooth subject movement, but recording time is limited to one second.

Moving Subject 4sec (5fps) provides more recording time, but subject movement is slightly rough.

Moving Subject 2sec (10fps)

10 frames per second 20 images

Moving Subject 4sec (5fps)

5 frames per second 20 images

Still Subject 1 image Records a single subject, which is cropped and inserted into the background image.

Changing the Number of Shots Setting

To shoot under these conditions Select this option

2 The subject against a complex background

You need to shoot twice to extract the subject.

1 The subject against a plain (no pattern) background

You need to shoot only once to extract the subject.

12 Creating a Dynamic Photo Image

You can write text on a blank sheet of paper, shoot an image of it, and then use the following procedure to extract the text for insertion into an image.

1. Before shooting the subject in step 3 under Step 1: Shoot the subject. (page 6), press [SET].

2. Use [8] and [2] to select Number of Shots and then press [SET].

3. Use [8] and [2] to select Text and then press [SET].

4. Press the shutter button to shoot what is written on the paper.

When shooting text, take care to make sure that only the paper it is written on completely fills the screen. Do not allow the edges of the paper to be included in the text image.

Extracting Text from an Image

Important!

13 Creating a Dynamic Photo Image

You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways.

Step 3: Have fun with Dynamic Photo.

On the camera

On a TV

Dynamic Photo images play back automatically as soon as you display them on the EXILIM monitor screen.

Connect your EXILIM to a TV with the AV cable and you can enjoy watching Dynamic Photo images on your TV screen.

A Dynamic Photo with a still image background and a moving subject is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.

1. Press [p] to enter the PLAY mode.

2. Use [4] and [6] to display the Dynamic Photo you want to convert.

3. Perform the following operation on the camera [MENU] * PLAY tab * Movie Converter.

4. Press [SET] to convert the displayed Dynamic Photo. The final movie format is Motion JPEG. The final movie image size is 640x480 pixels.

5. Save the converted Dynamic Photo to your computer.

Following conversion, the movie will be played back three times.

Step 4: Converting a Dynamic Photo Still Image to a Movie (Movie Converter).

Complete!

14 Creating a Dynamic Photo Image

On a PC Enjoy watching Dynamic Photo images on your PC screen.

In a digital photo frame Play Dynamic Photo images in a digital photo frame.

On a cell phone View Dynamic Photo images on your cell phone screen.

Share with your friends Send the Dynamic Studio URL to your friends and share your Dynamic Photo creations with them.

e-Greeting Cards Send animated e-greeting cards to your special friends and family members.

For presentations Animation GIF files can be included in presentation data for an impression that really lasts.

http://dynamicstudio.jp/ Dynamic Studio is a free online service that can be used to convert the moving subject extracted from Continuous Shutter images created during a Dynamic Photo operation to a movie file quickly and easily. This makes it possible to view Dynamic Photo images you created with a CASIO EXILIM digital camera to a format that can be played back as a movie

Manualsnet FAQs

If you want to find out how the EXH30 Casio works, you can view and download the Casio EXH30 Camera User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Casio EXH30 as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Casio EXH30. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio EXH30 Camera User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio EXH30 Camera User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio EXH30 Camera User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio EXH30 Camera User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio EXH30 Camera User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.