Contents

Casio EXFR100 Ver.1.00 Camera User's Guide PDF

1 of 158
1 of 158

Summary of Content for Casio EXFR100 Ver.1.00 Camera User's Guide PDF

Digital Camera EN

Users Guide

Thank you for purchasing this CASIO product. Before using it, be sure to read the precautions contained in this Users Guide. Keep the Users Guide in a safe place for future reference. For the most up-to-date information about this product, visit the official EXILIM Website

at http://www.exilim.com/

This manual covers the firmware versions below. Camera: Ver. 2.50 L Controller: Ver. 1.00

2

As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer.

* The shape of the power cord plug varies according to the country or geographic area where the camera is sold.

Accessories

Camera (EX-FR100)

Controller (EX-FR100CT)

Hinge Unit Comes pre-attached to

the camera.

Tripod nut Carabiner strap USB-AC adaptor

(AD-C53U)

Power cord* Micro USB cable Basic Reference

3

The contents of this manual are subject to change without notice. The contents of this manual have been checked at each step of the production

process. Feel free to contact us if you notice anything that is questionable, erroneous, etc.

Any copying of the contents of this Users Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD. is forbidden under copyright laws.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost profits, or claims by third parties arising out of the use of the EXILIM Connect application software.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits caused by loss of memory contents due to malfunction, repair, or any other reason.

Note that the example screens and product illustrations shown in this Users Guide may differ somewhat from the screens and configuration of the actual camera.

LCD Panel The liquid crystal panel of the monitor screen uses high-precision technology that provides a pixel yield in excess of 99.99%. This means that some very small number of pixels may not light or may remain lit at all times. This is due to the characteristics of the liquid crystal panel, and does not indicate malfunction.

Read this first!

Charge batteries before use. The camera and the controller each have a built-in rechargeable lithium ion battery. The batteries are not charged when you purchase the camera, so you will need to charge both the camera and controller before using them.

Take test shots Before shooting your final image, shoot a test shot to ensure that the camera is recording correctly.

4 Contents

Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . 10

Quick Start Basics 13

What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using the Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Hinge Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Tripod nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Carabiner Strap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Turning Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 30 Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Recording Images 41

To configure REC mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Shooting a Burst of Images . . . . . . . . . . . . . . . . . . . . . . . (High Speed CS). . . 43 Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Art Shot) . . . 44 Recording Beautiful Images of People and Scenery . . . . . . . (Make-up Art) . . . 45

Recording Full-body Images with Enhanced Leg Length . . . . (Long Legs) . . 46 Shooting Scenes of an Activity at a Fixed Interval . . . . (Interval Shooting) . . 47 Shooting with Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

5 Contents

Advanced Recording Settings 55

Using the REC Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Make-up) . . . 56 Shooting by Touching the Monitor Screen . . . . . . . . . . . . (Touch Shooting) . . . 56 Reducing Blur Due to Camera Movement

During Movie Recording . . . . . . . . . . . . . . . . . . . . . . . .(Movie Anti Shake) . . . 57 Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size) . . . 58 Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . . . 59 Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . (Brightness) . . . 59 Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . . 60 Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 61 Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . . 62 Self-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Mirror Image). . . 63 Reducing Wind Noise during Movie Recording . . . . . . . . (Wind Noise Cut) . . . 63 Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review). . . 64

Viewing Snapshots and Movies 65

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Creating a Movie of a Days Images . . . . . . . . . . . . . . . . (Highlight Movie) . . 67 Creating a Collage of a Days Snapshots . . . . . . . . . . . . (Highlight Photo) . . 69 Changing the Highlight Score of an Image . . . . . . . . . . . (Highlight Score) . . 71 Creating a Time Lapse Movie . . . . . . . . . . . . . . . . . . . . . . . . (Time Lapse) . . 72

Other Playback Functions (PLAY) 74

Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . . 75

Connecting the Camera with a Smartphone (Wireless Connection) 76

Controlling Your Camera with a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . 76 Using a Wireless Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Getting Ready to Establish a Connection between a Smartphone and Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Installing the EXILIM Connect App on Your Smartphone . . . . . . . . . . . . . . . . . . 80 Establishing a Wireless Connection for the First Time . . . . . . . . . . . . . . . . . . . . 81

Using a Smartphone as a Camera Remote Controller (Shoot with phone) . . 85 Sending a Snapshot or Movie File from Camera Memory to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Send Selected Image) . . 86 Viewing Snapshots and Movies in Camera Memory on a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (View on phone) . . 87

6 Contents

Configuring Wireless Connection Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Having Images Shot with the Camera Sent

to a Smartphone Automatically . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send). . . 88 Specifying Images to be Sent by Auto Send . . . . (Auto Send File Settings) . . . 89 Resizing Snapshots before Sending Them

to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize When Sending) . . . 90 Add Location Info to Snapshots . . . . . . . . . . . . . . . . . . . . . . (Location info) . . . 91 Changing the Camera Password

for Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . (WLAN password) . . . 92 Unpairing the Camera from a Smartphone . . . . . . . . . . . . . . . . (Unpairing) . . . 93

Printing 94

Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Using the Camera with a Computer 95

Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 95 Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 99

Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Other Settings (Set Up) 105

Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . 105 Selecting Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Info) . 105 Locking the Camera or Controller Screen Orientation . . . (Rotation Lock) . 106 Configuring Camera Sound Settings . . . . . . . . . . . . . . . (Camera Sound) . 106 Using the Vibration Function . . . . . . . . . . . . . . . . . . . . . . . . . . . (Vibration) . 107 Setting the Cameras Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 107 Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 108 Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 108 Specifying the Controller Sleep State Trigger Time . . . . . . . . . . . . (Sleep) . 108 Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . 109 Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . 109 Checking the Current Camera Firmware Version . . . . . . . . . . . . (Version) . 110

Appendix 111

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 Shock resistant, Splashproof, Dustproof . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

7 Contents

Disposing of the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 When things dont go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 150 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

8

The numbers in parentheses indicate the pages where each item is explained.

General Guide

bq

bs

bt

br

cmcnco cp

cq

cl

ck

6789

21 3

54

bn

bk bl bm

bo

bp

Camera

Wireless LAN connection lamp (page 83)

Operation lamp (pages 22, 25)

[p] (Power) (page 28)

Memory card slot (page 33)

[RESET] button (page 143)

[CARD] cover (page 33)

Speaker

Lens

Microphone (page 54)

Shutter button (page 36)

[0] (Movie) (page 52)

[FREE] lever (page 17)

[USB] port (pages 21, 24)

[USB] cover (pages 21, 24)

Strap holes

Controller

[USB] cover (pages 21, 24)

[RELEASE] button (page 16)

[RESET] button (page 143)

[USB] port (pages 21, 24)

Carabiner strap attachment bar (page 19)

Strap holes (page 9)

[0] (Movie) (page 52)

Shutter button (page 36)

Operation lamp (pages 22, 25)

[p] (Power) (page 28)

Hinge unit slot (page 16)

Camera Controller

9

1

2

To attach the strap to the camera (commercially available)

Attach strap here.

10

The monitor screen uses various indicators, icons, and values to keep you informed of the cameras status. The sample screens in this section are intended to show you the locations of all the

indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.

. Snapshot Recording

Monitor Screen Contents and How to Change Them

bt

ck

cl

cm

cn

co

12 54 76 89

bq bp

bn bm

brbs

bo

3

bl bk

White Balance (page 60)

Focus mode (page 62)

Digital zoom (page 51)

Location info (page 91)

Auto Send (page 88)

Remaining movie memory capacity (page 150)

Remaining snapshot memory capacity (page 150)

Snapshot image size (page 58)

Long Legs icon (page 46)

Movie quality (pages 52, 59) Touch Shooting function (page 56)

Movie Anti Shake (page 57)

ISO sensitivity (page 61)

Brightness (page 59)

Date/Time (pages 30, 107) Camera battery level indicator

(page 27)

Controller battery level indicator (page 27)

Communication status between camera and controller (page 28)

PLAY mode icon (page 30)

(Show Icons) icon

Interval Shooting icon (page 47) Wireless mode icon (page 79)

Recording mode icon (page 42)

Menu icon (page 55)

11

. Movie Recording

NOTE If you do not perform any operation for about three seconds during snapshot

recording or movie recording, icons will become transparent.

. Snapshot Viewing

Focus mode (page 62)

Movie quality (pages 52, 59)

Movie recording time (page 53)

21 3

bt

cl

ck

cm

cn

co

6543 7

brbs bq bp

8

bk 9

bl bm bn bo

21

Current image number/total number of grouped images (pages 43, 47)

Group images (High Speed CS (page 43), Interval Shooting (page 47))

Location info (page 91)

Auto Send (page 88)

Protect indicator Folder name-file name (page 102)

Snapshot image size (page 58)

Highlight Score (page 71) Make-up (page 56)

White Balance (page 60)

ISO sensitivity (page 61) Brightness (page 59)

Shutter speed

Image menu icon (page 66)

Camera battery level indicator (page 27)

Controller battery level indicator (page 27)

Date/time (pages 30, 107)

Communication status between camera and controller (page 28)

(Show Icons) icon

REC mode icon (page 30)

Delete icon (page 39)

Wireless mode icon (pages 79, 87)

Edit icon (pages 67, 69, 71, 72)

Menu icon (page 74)

12

NOTE The folder name and file name in the upper right corner of the monitor screen has

the meaning described below (page 102). Example: 100-0023: 23rd image file in the folder named 100CASIO.

. Movie Playback

NOTE If you do not perform any operation for about three seconds during snapshot

viewing or movie playback, icons will become transparent.

Movie recording time (page 65)

Movie quality (pages 52, 59)

Highlight Score (page 71) Image menu icon (page 66)

Date/time (pages 30, 107)

Movie play icon (page 65) (Show Icons) icon

7

1 2

56

3

4

13 Quick Start Basics

Quick Start Basics

Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions.

. Shooting

What you can do with your CASIO camera

Make-up Art This mode is suitable for use outdoors. It enhances the color saturation of scenery to create an artistic effect. A make-up effect is applied to the face of the human subject.

Long Legs Composing the image in accordance with the on- screen guidelines will produce an image that enhances the length of the subjects legs.

A variety of shooting styles The camera connects to the controller using Bluetooth wireless technology (Bluetooth). The hinge unit and tripod nut make it possible to shoot from a variety of different angles. The camera can also be rotated 90 degrees, which means you can change the orientation of a snapshot with little physical repositioning of the camera.

Interval Shooting Shoot snapshots and/or movies at fixed intervals. Its a great way to chronicle an activities or changes over time.

*See page 45 for more information.

*See page 46 for more information.

*See page 16 for more information.

*See page 47 for more information.

14 Quick Start Basics

. Viewing

Art Shot A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting.

Highlight Photo You can configure camera settings to automatically select snapshot highlights and generate a collage of them.

Highlight Movie You can configure camera settings to automatically select snapshot and movie highlights, and create a movie of them.

Time Lapse Creates a movie of snapshots you shot.

*See page 44 for more information.

*See page 69 for more information.

*See page 67 for more information.

*See page 72 for more information.

15 Quick Start Basics

. Sharing

Wireless Connection Turns your smartphone into a camera remote controller and allows you to select one or more snapshot and/or movie file in camera memory and send a copy to a smartphone.

*See page 76 for more information.

16 Quick Start Basics

You can configure the camera to suit your specific needs by attaching the hinge unit, which enables attachment of the controller, and other included and optionally available attachments. This way you can configure the camera to suit your specific needs.

IMPORTANT!

Do not apply strong pressure to the surface of the monitor screen. Doing so can damage it.

Never touch the lens with your fingers. Finger smudges, dirt, and other foreign matter on the lens can interfere with proper operation of the camera. Use a blower or other means to keep the lens and flash window free of dirt and dust, and wipe gently with a soft, dry cloth.

You can attach the controller to the camera and use the camera as a normal camera.

. To attach the controller

1. With the camera lens pointed in the same direction as the controllers monitor screen, slide the hinge unit into the controllers hinge unit slot.

2. Push the hinge unit in until you hear it click into place.

. To detach the controller

1. While holding down the controllers [RELEASE] button, pull it out of the camera.

Using the Attachment

Controller

Hinge unit slot

Align the 2 mark on the end of the hinge unit with the 8 mark next to the hinge unit slot.

[RELEASE] button

17 Quick Start Basics

. To use the hinge unit as a stand

. To change the shooting direction by 90 degrees

1. While pulling down on the cameras [FREE] lever, rotate the camera clockwise 90 degrees until you hear a click. Align the cameras operation lamp with the C

mark on the hinge unit. The indentations in the lens ring indicate the

orientation of the long dimension of the image being shot.

. To remove the hinge unit from the camera

1. While pulling down on the cameras [FREE] lever, rotate the camera counterclockwise about 15 degrees until its operation lamp is aligned with the A mark on the hinge unit.

Hinge Unit

Lens ring

[FREE] lever

Indentations

A B C

A

[FREE] lever

18 Quick Start Basics

2. Remove the hinge unit from the camera.

. To attach the hinge unit to the camera

1. Align the cameras operation lamp with the A mark on the hinge unit.

2. Rotate the camera clockwise about 15 degrees until its operation lamp is aligned with the B mark on the hinge unit.

1. Use the tripod nut to secure a tripod (commercially available) to the hinge unit.

Tripod nut

A B

Tripod (commercially available)

Tripod nut

19 Quick Start Basics

1. Pass the carabiner strap belt around the controllers carabiner strap attachment bar.

2. Pass the belt through the buckle to secure it. Pull on the belt until the belt flap is passed all the way through the buckle.

3. Hook the flap on the buckle.

4. Pull on the carabiner and controller to confirm that the flap is hooked on the buckle and is secure.

IMPORTANT!

The carabiner strap is not intended for mountain climbing use. It is designed only to support the camera.

NOTE When shooting hold the camera still. Carefully press the shutter button and take

care to avoid all movement as the shutter releases and for a few moments after it releases.

Take care that your fingers and the strap do not cover any of the areas indicated in the illustration.

Never swing the camera around by its strap. The supplied strap is intended for use with this

camera only. Never use it for any other purpose.

Carabiner Strap

flap

flap

Microphone

Lens

20 Quick Start Basics

The monitor screen of the camera is a touch panel. This means you can perform the following operations by touching the screen with your fingers.

Touch Momentarily touching the screen with your finger. Touch the screen to select an icon or menu item, and to configure settings.

Flick Holding your finger against the screen as you flick it up, down, left, or right. Use flick to scroll forward through images.

Spread Holding your thumb and forefinger against the screen as you spread them out. Use spread to enlarge the screen image.

Squeeze Holding your thumb and forefinger against the screen as you bring them together. Use squeeze to reduce the size of the screen image, and to display multiple images.

IMPORTANT!

Never use a pointed or hard object to perform screen operations. Doing so can damage the screen.

The camera will have a hard time interpreting a screen operation made using your fingernails. Use the fleshy pad of your finger.

Using the Touch Panel

Monitor Screen

21 Quick Start Basics

NOTE Applying a commercially available LCD protective sheet will reduce the operation

sensitivity of the monitor screen.

The camera and the controller each have a built-in rechargeable lithium ion battery. The batteries are not charged when you purchase the camera, so you will need to charge both the camera and controller before using them. You can use either of the two following methods to charge the batteries. USB-AC adaptor USB connection to a computer (Using the included micro USB cable.)

. To charge with the USB-AC adaptor While the camera and controller are turned off, connect in the sequence shown below.

When disconnecting the USB-AC adaptor from the camera or controller, be sure to disconnect from them first.

First, charge the battery prior to use.

Charging time : Camera: Approximately 2 hours 15 minutes Controller: Approximately 2 hours 55 minutes

3

2

44

1

USB-AC adaptor (AD-C53U)

When plugging in the connectors, orient this marking as described below. Camera : Towards the lens side Controller: Towards the monitor screen side

[USB] port

Micro USB cable (included with camera)

Power cord

[USB] cover

22 Quick Start Basics

NOTE If you turn on the camera or controller while charging with the USB-AC adaptor,

you will be able to perform normal recording operations. In this case, however, charging of the camera will be stopped while it is turned on.

. Operation Lamp Indications

While power is off

While power is on Camera

Controller

Operation Lamp Status Meaning

Lit red Charging

Flashing red Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

Unlit Charging complete

Operation Lamp Status

Meaning

Lit green Camera turned on

Charging stopped

Slow red-amber flashing

In sleep state

Charging

High speed red-green flashing

Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

Slow green flashing Charging complete

Operation Lamp Status Meaning

Lit red Charging

Slow red-amber flashing Charging (sleep state)

High-speed green-amber flashing

Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

High-speed red-green flashing Same as above (sleep state)

Lit green Charging complete

Slow green flashing Charging complete (sleep state)

23 Quick Start Basics

IMPORTANT!

A battery that has not been used for a long time and/or ambient temperature can cause charging to take longer than normal. These conditions may also cause the operation lamp to flash red. If this happens, refer to page 135.

The USB-AC adaptor will become warm during charging. This is normal and does not indicate malfunction.

The shape of the power plug depends on each country or geographic area.

If the operation lamp is not lit or flashing during charging, check the orientation of the USB cable connectors. Make sure that you insert the cable connector into the USB port until you feel it

click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.

Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

Camera

Controller

24 Quick Start Basics

. To charge using a USB connection to a computer While the camera and controller are turned off, connect in the sequence shown below (, ).

If the camera or controller is on, hold down [p] (Power) for about two seconds to turn it off before connecting to the computer.

NOTE If you turn on the camera while charging over a USB connection to a computer is in

progress, the camera will establish a USB connection with the computer. Charging will continue. Charging will also continue if you turn on the controller. Note that certain types of computers or connection environments may stop charging if supply power is low.

Charging time : Camera: Approximately 2 hours 55 minutes Controller: Approximately 2 hours 55 minutes

USB

211

Micro USB cable (included with camera)

[USB] port

USB port

Computer (power turned on)

When plugging in the connectors, orient this marking as described below. Camera : Towards the lens side Controller: Towards the monitor screen side

[USB] cover

25 Quick Start Basics

. Operation Lamp Indications

While power is off

While power is on Camera

Controller

Operation Lamp Status Meaning

Lit red Charging

Flashing red Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

Unlit Charging complete

Operation Lamp Status Meaning

Lit amber Charging

High speed red-green flashing Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

Lit green Charging complete

Operation Lamp Status Meaning

Lit amber Charging

Slow red-amber flashing Charging (sleep state)

High-speed green-amber flashing

Charging stopped due to abnormal internal temperature, USB-AC adaptor problem, battery problem (page 135), timer operation.

High-speed red-green flashing Same as above (sleep state)

Lit green Charging complete

Slow green flashing Charging complete (sleep state)

26 Quick Start Basics

IMPORTANT!

The first time you connect the camera or controller to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

A battery that has not been used for a long time, certain types of computers, and connection conditions can cause charging to take longer than normal. These conditions may also cause the operation lamp to flash red. If this happens, refer to page 143.

For faster charging, use of the supplied USB-AC adaptor is recommended. Charging is not performed while the connected computer is in the hibernate mode.

Other Charging Precautions With the two charging methods described above, you can charge the batteries.

Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.

This model can be charged only via from USB 2.0 specification USB port. USB charging devices and power supply devices are subject to fixed standards.

Use of an inferior device or a device that is not up to standard can cause malfunction and/or failure of your camera.

Operation is not guaranteed in the case of a computer built or modified by you. Even in the case of a commercially available computer, certain USB port specifications may make it impossible to charge via the USB cable.

A battery that is still warm immediately after normal use may not charge fully. Give the battery time to cool before charging it.

A battery discharges slightly while it is loaded in the camera or controller. Because of this, it is recommended that you charge the battery immediately before you need to use it.

Charging the battery may cause interference with TV and radio reception. If this happens, plug the USB-AC adaptor into an outlet that is further away from the TV or radio.

Actual charging time depends on current battery capacity and charging conditions. Do not use the USB-AC adaptor with any other device. Never use the power cord with another device. Use only the USB-AC adaptor and USB cable specified in this manual for charging.

Use of any other type of devices may result in improper charging.

27 Quick Start Basics

Checking the Current Battery Level As battery power is consumed, a battery indicator on the monitor screen indicates its current level as shown below.

indicates battery power is low. Charge the battery as soon as possible. indicates that the battery is about to go dead. Charge the battery immediately.

The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.

Leaving the camera for about 8 days with no power supplied while the battery is dead will cause its date and time settings to be cleared. A message telling you to configure time and date settings will appear the next time you turn on the camera after restoring power. When this happens, configure date and time settings (page 107).

See page 154 for information about battery life and number of shots.

Level High Low

Battery Indicator

Camera * * *

Controller * * *

Indicator Color White * White * Red * Red

28 Quick Start Basics

. Camera-Controller Wireless Connection The camera and controller communicate over a Bluetooth wireless technology connection. Once you perform the pairing operation required for Bluetooth wireless technology connection, the camera and controller will automatically connect to each other whenever you turn them on. Note that the connection will be lost when the distance between the camera and controller becomes too great. The controller will turn off after a preset amount of time after the Bluetooth wireless technology connection is lost. The camera will remain on, so you can shoot images by pressing its shutter button.

IMPORTANT!

Your camera has Bluetooth wireless technology communication functionality built in. Avoid operating the camera (including camera standalone operations) inside of aircraft or anywhere else where wireless data communication is restricted.

. To turn on power Both the camera and controller need to be turned on in order to use them.

Turning on the camera causes the camera and controller operation lamps to light green, and automatically starts an operation to establish a Bluetooth wireless technology connection between the camera and controller. An image appears on the controller and shooting is enabled.

The connection between the camera and controller is affected by their orientation and by the distance between them.

The maximum range for shooting with the controllers shutter button is around 10 meters (32.8'). The maximum range for viewing the image on the controllers monitor screen is around five meters (16.4').

If the connection is poor, the controller operation lamp will flash green and (Communication status between camera and controller) will appear on the monitor screen. Camera response may be slow if you perform an operation on the controller while communication conditions are bad. If this happens, try adjusting the orientation and the distance between the camera and controller.

Turning Power On and Off

Camera Press [p] (Power).

Controller Press [p] (Power).

[p] (Power)

Operation lamp

[p] (Power)

Operation lamp

29 Quick Start Basics

Note the precautions below to ensure stable communication between the camera and controller. Make sure nothing is blocking the gray areas

as shown in the illustrations. Point the back of the controller at the

camera. Make sure there are no obstacles in the path

between the camera and controller.

Sleep Mode If you press [p] (Power) on the controller or if you do not perform any controller operation for the time specified by the Sleep setting on the Setup menu (page 108) while there is a Bluetooth wireless technology connection between the camera and controller, the camera and controller will enter a sleep state. The operation lamp slowly flashes green while the camera is in the sleep mode. To restore the controller display, press any controller button. A low-power Bluetooth wireless technology connection between the camera and controller is maintained even while they are in the sleep mode, so operation is quickly enabled when you are ready to use the camera and controller. If the distance between the camera and controller becomes to great or if

communication conditions become bad while the camera is in the sleep mode, the connection may be dropped between them.

30 Quick Start Basics

Toggling Between the REC Mode and PLAY Mode

. To turn off power On both the camera and the controller, hold down [p] (Power) for about two seconds. Turning off the camera will cause the controller to turn off automatically. The camera will emit a sound when the camera is turned off. The camera turns off

when the power down process is complete.

The first time you turn on the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.

IMPORTANT!

Camera models sold in certain geographic areas may not support display language selection.

1. Turn on the camera and controller (page 28). If this is the first time you are turning on power, a language selection screen will

appear. If the screen does not appear, check to make sure that the camera is turned on.

2. Flick (page 20) the controller screen upwards and downwards or touch , until you find the language you want, and then touch to select it.

To enter the PLAY mode

In the REC mode, touch (PLAY). If (PLAY) is not displayed on

the screen, you can touching the Review image (page 64), or switch to the PLAY mode by touching (Show Icons) and then touching (PLAY).

To enter the REC mode

In the PLAY mode, touch (Show Icons). On the screen image that appears, touch (REC).

Configuring Basic Settings the First Time You Turn On the Camera

(Show Icons)

Screen after (Show Icons) is touched

(PLAY) / (REC)

31 Quick Start Basics

3. Touch the date display format you want. Example: July 10, 2017 YY/MM/DD * 17/7/10 DD/MM/YY * 10/7/17 MM/DD/YY * 7/10/17

4. Set the date and the time. Touch the value you want to change (year,

month, day, hour, minute) and then touch , to change it.

To switch between 12-hour and 24-hour format, select am (pm)/24h and then touch , to change the setting.

5. When the date and time settings are the way you want, touch OK.

NOTE Each country controls its local time offset and the use of summer time, and so they

are subject to change. While the camera is connected to a smartphone with the EXILIM Connect app, you

can execute auto date and time adjustment. The cameras time zone will be changed automatically in accordance with the smartphones time zone. For details, see the EXILIM Connect Users Guide (page 78).

If you make a mistake configuring display language, date, or time settings with the above procedure, refer to the following pages for information about how to correct the settings. Display language: Page 108 Date and time: Page 107

12/24 hour switch icon

32 Quick Start Basics

Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory. Snapshots and movies stored in built-in memory cannot be copied to a memory

card. For information about memory capacities, see page 150.

microSD Memory Card microSDHC Memory Card microSDXC Memory Card

The above are supported memory card types as of January 2017.

This camera supports use of microSD memory cards of the following types and capacities: microSD memory cards up to 2GB; microSDHC memory cards greater than 2GB, up to 32GB; microSDXC memory cards greater than 32GB, up to 2TB. Note that the ability to use any particular card with this camera, even if it satisfies the above capacity and type requirements, is not guaranteed.

. Memory Card Handling Precautions Certain types of memory cards can slow down processing speeds. In particular, high- quality movies may not be able to be stored correctly. A slow memory card can take too much time to record data and result in breaks in the image and/or audio during playback.

Preparing a Memory Card

Supported Memory Cards

Warning!

0Memory cards are small and present a risk of accidentally being swallowed by infants and young children. Keep memory cards out of the reach of infants and young children. If a memory card is ever swallowed accidentally, contact a physician immediately.

+

*

33 Quick Start Basics

1. On the camera, hold down [p] (Power) for about two seconds to turn off power, and then open the [CARD] cover.

2. Load a memory card. Positioning the memory card so its back is facing upwards (towards the lens side of the camera), slide it into the card slot all the way in until you hear it click securely into place.

3. Close the [CARD] cover.

IMPORTANT!

Never insert anything besides a supported memory card (page 32) into the memory card slot.

Should water or any foreign object ever get into the card slot, immediately turn off the camera, and contact your retailer or nearest CASIO authorized service center.

To load a memory card

Back

Front Back

34 Quick Start Basics

. To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one.

IMPORTANT!

Turn off the camera before replacing the memory card. Replacing the card while the camera is on can result in recorded images not being saved and even damage the memory card.

Format a memory card on the camera before using it for the first time.

IMPORTANT!

Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again. However, if storing to a card has slowed down or if you notice any other abnormality, re-format the card.

Be sure to use the camera to format a memory card. Formatting a card on a computer will result in a non-SD standard format, which can greatly slow down processing time and cause compatibility, performance, and other problems.

1. Load a memory card (page 33).

2. Turn on the camera and controller, and then touch (Show Icons).

3. Touch MENU.

4. Touch the Setup tab.

5. Flick upwards and downwards until you find Format, and then touch it.

6. Touch Format and then touch Yes. This starts the memory card format operation.

To format (initialize) a new memory card

35 Quick Start Basics

Your camera has a variety of different recording modes to suit various shooting conditions and objectives (page 42). This section explains general shooting procedures using the auto recording mode.

You can select one of two auto recording modes (Auto or Premium Auto Pro) according to your digital imaging needs.

1. Turn on the camera and controller (page 28). This causes the camera and controller to start up on the REC mode.

2. Touch (Show Icons).

3. Touch the second icon from the top (second icon from the right in the case of portrait display orientation) (Recording mode).

4. Touch Auto or Premium Auto Pro to select the auto recording mode you want.

To Shoot a Snapshot

Selecting an Auto Recording Mode

Setting REC Screen Icon Display

Description

Auto This is the standard Auto recording mode.

Premium Auto Pro

With Premium Auto Pro recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto Pro recording delivers higher image quality than Auto recording. Some of the settings configured automatically by

Premium Auto Pro cannot be changed by you. It also requires more power (and runs down the

battery quicker) than Auto. This recording mode is recommended when you

plan to create a Highlight Photo or Highlight Movie.

Recording mode icon

36 Quick Start Basics

1. Point the camera at the subject. If you are using Premium Auto Pro, an icon will appear on the monitor screen describing the type of shot the camera has detected. You can change display the zoom screen by holding

two fingers against the screen and spreading them apart (page 51).

2. Press the camera or controller shutter button. The camera will automatically adjust exposure and focus, and then shoot the snapshot. Normally, shooting a snapshot will cause the

operation lamp to flash red once. Note, however, that the operation lamp will not flash while Macro is selected as the focus mode.

Shooting a Movie Press [0] (Movie) on the camera or controller to start movie recording. Recording will stop if you press [0] (Movie) again. See page 52 for details.

NOTE You also touch a location on the screen to focus on it,

and then shoot the image (page 56). You can specify the image size for snapshots. See

page 58 for more information. The operation lamp flashes red while movie recording is in progress.

. Shooting with the Camera Alone You can use the camera in a stand-alone configuration without turning on the controller or otherwise establishing a connection between it and the camera. If an Interval Shooting (page 47) operation or movie recording (page 52) is in

progress, it will continue to shoot images even when controller power is turned off.

To shoot a snapshot

Type of shot

+ (Telephoto) (Wide Angle)

Shutter button

Camera

Controller

[0] (Movie)

[0] (Movie)

Shutter button

Operation lamp

37 Quick Start Basics

. Shooting with Premium Auto Pro Some menu items are not available while Premium Auto Pro is in use (page 55). In addition to shutter speed and ISO sensitivity, the camera automatically executes

the following operation as required when shooting with Premium Auto Pro. Auto Focus is normally performed until you touch the monitor screen. The camera automatically determines the focus point on the screen and focuses

there. When shooting with Premium Auto Pro, the message Processing Premium Auto.

Please wait... may appear on the monitor screen. If you feel the camera is taking too long to process data, try shooting with Auto instead.

In some cases, Premium Auto Pro may not be able to interpret the shooting environment correctly. If this happens, shoot with Auto.

If HS is displayed, the camera will shoot a series of CS images and merge them into a final image. Take care to avoid any camera and subject movement until shooting of all of the CS images is complete.

38 Quick Start Basics

Use the following procedure to view snapshots on the cameras monitor screen. For information about how to play back movies, see page 65.

1. Touch (PLAY) to enter the PLAY mode. This will display one of the snapshots currently stored in memory. You can also enter the PLAY mode by touching the

review image screen (page 64). Information about the displayed snapshot also is

included (page 11). You also can clear the information to view only the

snapshot (page 105). You can zoom the screen image by touching the monitor screen (page 66).

If you are recording a snapshot that is very important to you, it is recommended that you zoom the image and check its details after recording it.

2. Flick left or right across the screen image to scroll through the snapshots.

NOTE Pressing the controller shutter button while in the PLAY mode or while a menu

screen is displayed will switch directly to the REC mode. A question mark (?) will be displayed for images that cannot be displayed for some

reason.

Viewing Snapshots

(PLAY)

39 Quick Start Basics

If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images.

IMPORTANT!

Remember that a file (image) delete operation cannot be undone.

. To delete a single file

1. Enter the PLAY mode.

2. Touch (Show Icons).

3. Touch .

4. Touch Delete 1 File.

5. Flick the screen the left or right to scroll through images until the one you want to delete is displayed.

6. Touch (Delete). This will delete the selected image.

. To delete all files

1. Enter the PLAY mode.

2. Touch (Show Icons).

3. Touch .

4. Touch Delete All Files.

5. Touch Delete. This will cause the message There are no files. to appear.

Deleting Snapshots and Movies

40 Quick Start Basics

Operation If unwanted light is shining onto the lens, shade the lens with your hand when

shooting an image.

Monitor Screen when Shooting Snapshots Subject brightness conditions can cause monitor screen response to slow and can

cause digital noise in the monitor screen image. The image that appears on the monitor screen is for image composition. The actual

image will be recorded in accordance with the currently selected recording mode (page 42).

Shooting Indoors under Fluorescent Lighting Minute flickering of fluorescent lighting can affect the brightness or color of an

image.

Other Precautions A noise reduction process is performed when ISO sensitivity is set to a high value.

This can cause the camera to take relatively longer to be ready to shoot again after you press the shutter button. Do not perform any operation while the image recording operation is in progress.

Due to the characteristics of the imaging element used by the camera, very fast moving objects in an image may appear distorted.

. Auto Focus Restrictions Any of the following can make proper focus impossible.

Solid color wall or other very low contrast subject Strongly back lit subject Very shiny subject Blinds or other subject with a repeating horizontal pattern Multiple subjects at varying distances from the camera Subject in a dark location Camera movement while shooting Fast-moving subject Subjects outside the focus range of the camera

Focus lock can be used in some recording modes. If you cannot focus properly, try using focus lock (page 57).

Snapshot Shooting Precautions

41 Recording Images

Recording Images Touching the monitor screen in the REC mode will display a screen for configuring REC mode settings.

1. Press [p] (Power) to turn on the camera and enter the REC mode. If the camera is in the PLAY mode, touch (REC) to enter the REC mode.

2. Touch (Show Icons).

3. Touch the item whose setting you want to change.

To configure REC mode settings

Menu (page 55)* Recording mode (page 42)

Wireless mode (page 79)

Interval Shooting mode (page 47) PLAY mode (page 30)

* Depending on the recording mode, some of the items on the menu that appears may not be usable.

[p] (Power)

1

2

3

4

5

42 Recording Images

The camera has a variety of different recording modes.

1. In the REC mode, touch the (Show Icons).

2. Touch the recording mode icon.

3. Touch the icon of the recording mode you want to use. This enters the selected recording mode.

Selecting a Recording Mode

Auto Standard Auto recording mode. This is the mode normally used for shooting (page 35).

Premium Auto Pro

With Premium Auto Pro recording, the camera automatically determines whether you are shooting a subject or scenery, and other conditions. Premium Auto Pro recording delivers higher image quality than Auto recording mode (page 35).

High Speed CS High Speed CS lets you shoot a burst of 30 images (page 43).

Art Shot A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting (page 44).

Make-up Art It enhances the color saturation of scenery to create an artistic effect. A make-up effect is applied to the face of the human subject (page 45).

Recording mode icon

43 Recording Images

Use the procedure below to shoot a burst of images.

1. In the REC mode, touch (Show Icons).

2. Touch the recording mode icon.

3. Touch (High Speed CS).

4. Touch the scene that matches what you want to shoot.

Touching on the screen and then touching a High Speed CS scene displays detailed information about the scene.

If you selected High Speed CS 30 fps, go to step 6. If you selected High Speed CS Prerecord, go to step 5.

5. Touch Pre REC. This will start pre-recording of a group of images that will be continually updated until you press the shutter button. To stop the pre-record operation of images, touch .

6. Press the shutter button. This will shoot 30 CS images.

Shooting a Burst of Images (High Speed CS)

Scene Description

High Speed CS 30 fps High-speed shooting of 30 images in one second.

High Speed CS Prerecord

Pressing the shutter button will store 15 pre-recorded images along with 15 CS images that are shot after the shutter button is pressed.

44 Recording Images

A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting.

1. In the REC mode, touch the (Show Icons).

2. Touch the recording mode icon.

3. Touch C (Art Shot).

4. Touch the Art Shot scene you want to use. Touch , to display another scene. Touching on the monitor screen and then touching an Art Shot scene will

display detailed information about the scene.

5. Press the shutter button to shoot.

NOTE The Art Shot effect will not be applied to a movie shot while an Art Shot scene is

selected. Sample images shown on Art Shot scene screens were not shot with this camera. An image shot with an Art Shot scene cannot be converted to a normal (no Art Shot

effect) image.

Shooting with Artistic Effects (Art Shot)

Scene Description

Toy Camera Dark edges and altered hues make images look like they were shot by a toy camera.

Soft Focus Overall blurring for a soft and romantic effect.

Light Tone Weakened contrast for a feeling of airy refinement.

Sepia Sepia tones create a decidedly retro look.

Monochrome All of the strong contrast and graininess of a black and white print.

45 Recording Images

This mode is suitable for use outdoors. It enhances the color saturation of scenery to create an artistic effect. A make-up effect is applied to the face of the human subject.

1. In the REC mode, touch (Show Icons).

2. Touch the recording mode icon.

3. Touch (Make-up Art).

4. Touch the scene that matches what you want to shoot.

Touching on the screen and then touching a Make-up Art scene displays detailed information about the scene.

5. Press the shutter button to shoot.

NOTE When using Make-up Art, wait until the camera is able to detect a face before

shooting. If the camera is unable to detect a face, a strong art effect may be applied to the

face as well as to the background. The Make-up Art effect will not be applied to a movie shot while a Make-up Art

scene is selected. Sample images shown on Make-up Art scene screens were not shot with this

camera. An image shot with a Make-up Art scene cannot be converted to a normal (no

Make-up Art effect) image. Shooting with Make-up HDR can cause monitor screen response to slow down and

may cause digital noise in the monitor screen image.

Recording Beautiful Images of People and Scenery (Make-up Art)

Scene Description

Make-up HDR Applies a make-up effect to the face of the human subject and uses HDR composition on the background to create a striking work of art.

Make-up Vivid Applies a make-up effect to the face of the human subject and enhances the color saturation of the background.

46 Recording Images

Composing the image in accordance with the on-screen guidelines will produce an image that enhances the length of the subjects legs.

1. In the REC mode, touch (Long Legs).

2. Touch the scene that matches what you want to shoot. Touching on the screen and then touching the

Long Legs scene displays detailed information about the scene.

3. Adjust the distance between the camera and subject to align the subjects face and legs with the guidelines on the screen.

4. Press the shutter button to shoot.

NOTE Zoom is disabled while Long Legs guidelines are on the screen. If the lens is

zoomed when the Long Legs scene is selected, it will return to the normal (unzoomed) position automatically.

The Long Legs scene cannot be used during movie recording.

Recording Full-body Images with Enhanced Leg Length (Long Legs)

47 Recording Images

You can use Interval Shooting to shoot snapshots and movies automatically at a specified interval.

Scenes marked with mark (non-Standard scenes) With these scenes, the Interval setting is a rough guide only, and the actual

interval depends on decisions made by the camera about shooting conditions. Because of this, the actual shooting interval may be slightly different from the setting.

A five-second interval cannot be set for these scenes.

. To start an Interval Shooting operation

1. In the REC mode, touch the (Show Icons).

2. Touch the Interval Shooting mode icon.

3. Touch the Interval Shooting scene you want to use. Touching will display a detailed explanation

about each scene. Flick upwards or downwards on the monitor screen to scroll through scenes. When the one you want is displayed, touch its icon.

4. Touch .

Shooting Scenes of an Activity at a Fixed Interval (Interval Shooting)

Scene REC Screen Icon Display

Description

Standard Shoots at a fixed interval.

Intelligent Shoots after determining the optimum setup.

Hiking Shoots using a setup optimized for hiking.

Cycling Shoots using a setup optimized for cycling.

Snow & Water Shoots using a setup optimized for snow and water sports.

Leisure Shoots using a setup optimized for leisure and trips.

Interval Shooting mode icon

48 Recording Images

5. Touch an item and then change its setting.

6. Touch (Back).

7. Touch Start. This starts the operation. Starting Interval Shooting operation causes the camera and controller to enter

a sleep state and standby for recording of the images. This will be indicated by the cameras operation lamp flashing green. Note that the camera will not enter the sleep state if 5 sec is selected for the Interval setting.

To recover from the sleep state, press any controller button. Next, touching on the monitor screen will display the number of recorded images. The maximum number of shots is 9,999.

Interval Allows selection of one of the shooting intervals below. 5 sec, 15 sec, 30 sec, 1 min, 2 min

Shooting Style

t: Shoots five snapshots followed by a five-second movie.

Only: Shoots a five-second movie. Audio is also recorded with this setting.

t Only: Shoots a snapshot. When 5 sec is selected for the Interval setting, the

movie recording time is two seconds.

49 Recording Images

NOTE Anti-shake is applied in accordance with the current camera settings. However,

image anti-shake is not applied. The current shooting setup, including zoom, cannot be changed while shooting

with this function. If the camera battery goes dead during an Interval Shooting operation, the

operation will terminate. The controller battery going dead does not affect an ongoing operation. To stop the Interval Shooting operation in this case, hold down [p] (Power) on the camera for about two seconds.

If you are performing manual camera operations or if the camera is out of the sleep state when the Interval Shooting operation reaches a shooting interval, Interval Shooting recording for that interval will be skipped.

Pressing the controllers [p] (Power) button while the camera is out of the sleep state will return to the sleep state and restart the Interval Snapshot operation.

Initial default settings depend on the selected scene. If you change any settings, they are retained when you turn the camera off. To

restore initial default settings, perform a reset operation (page 109) to reset the camera.

Certain environments may cause the shooting interval to be longer than normal.

50 Recording Images

. To stop an Interval Shooting operation

1. On the controller, press any button to recover from the sleep state.

2. Touch icon.

3. Touch Yes. This stops the Interval Shooting operation.

. To shoot images manually during an Interval Shooting operation You can shoot snapshots and movies manually even while an Interval Shooting operation is in progress.

1. On the controller, press any button to recover from the sleep state.

2. Perform the required controller or camera operation to shoot the image you want.

NOTE You can also press the cameras shutter button or [0] (Movie) button to shoot while

the camera is in the sleep state. After an Interval Shooting operation is complete, the recording mode will return to

Premium Auto Pro. The Review image is displayed only when Type 1 is selected as the Review

image type (page 64).

51 Recording Images

Your camera is equipped with digital zoom, that lets you zoom an image up to 4X. Note that a digital process is used to enlarge the center of the image, so there is deterioration of image quality.

1. Perform the required screen operation to change the zoom factor as desired. Zoom in: Touch +, or spread Zoom out: Touch , or squeeze

2. Press the shutter button to shoot the image.

NOTE Telephoto images are prone to blurring caused by camera movement when you

press the shutter button. Because of this, stabilizing the camera by placing it on a level surface, etc. is recommended.

Zoom operations are disabled while shooting with Interval Shooting. Zoom operations are disabled during movie recording. Perform the zoom operation

before you start recording. is displayed on the monitor screen while digital zoom is being used.

Shooting with Zoom

Telephoto : Enlarges the subject and narrows the range. Wide Angle : Reduces the size of the subject and broadens the range.

Telephoto Wide Angle

52 Recording Images

The following procedure explains how to record a movie.

1. In the REC mode, touch (Show Icons).

2. Touch MENU.

3. Touch , until you find Movie Quality, and then touch to select it.

4. Touch the item whose setting you want to change.

5. To close the menu screen, touch or press the shutter button.

To record a movie

Movie Quality

REC Screen Icon Display

Frame Rate

Image Size (Pixels)

Description

FHD(30p) 30fps 1920x1080

Select this setting to record full high-definition (FHD) movies. The aspect ratio of movies recorded with this setting is 16:9.

STD 30fps 640x480

Use this setting for standard movie recording. Shooting is performed using an aspect ratio of 4:3.

HS240 240fps 512x384

Select this setting to record high speed movies at a speed of 240 fps. Audio is not recorded.

53 Recording Images

6. Press [0] (Movie). This will start recording. Monaural audio is also recorded during movie

recording while FHD(30p) or STD is selected for the movie quality setting.

When FHD(30p) or STD is selected for the movie quality setting, you can touch a point on the controller screen while movie recording is in progress to focus on that point. Note, however, that touching the screen will not perform a focus operation if the Touch Shooting setting (page 56) is Off.

7. Press [0] (Movie) to stop recording. Each movie can be up to 29 minutes or 4 GB long. Movie recording also will

stop automatically if memory becomes full before you stop movie recording.

Recording Movies with Premium Auto Pro When Premium Auto Pro is enabled (page 35), the camera automatically make judgments about the subject, shooting conditions, and other parameters. The result is higher quality images than those produced by Auto recording. Premium Auto Pro is enabled for FHD(30p) movies and STD movies only. Using Premium Auto Pro uses up the battery charge more quickly than using Auto

recording.

Minimizing the Effects of Camera Movement during Movie Recording While the image quality setting is FHD(30p) or STD, you can reduce blur due to camera movement during movie recording by selecting the Standard or Strong setting for Movie Anti Shake (page 57). Note, however, that image stabilization does not prevent image blur due to subject movement during movie recording. Also, image stabilization results in a narrower angle of view during movie recording. Though selecting Strong for the Movie Anti Shake setting will increase the anti shake effect, it can also increase the chance horizontal banding in the image due to light source flicker (caused by fluorescent lighting).

High Speed Movie Recording Precautions When shooting a high speed movie, shoot in a well-lit environment. When recording a high speed movie, light source flicker can cause horizontal

bands to appear in the image. This does not indicate malfunction of the camera.

Recording time

54 Recording Images

Movie Recording Focus Position When the focus mode setting is AF or PF, recording is performed using pan focus, which provides a deep depth of field and suppresses image blurring. When the focus mode setting is Macro, the image is automatically focused and fixed before recording starts. Also, you can touch a location on the monitor screen during movie recording to focus at that location. Note, however, that touching the screen will not perform a focus operation in the following cases. Off selected for the Touch Shooting setting PF selected for the focus setting HS240 is selected for the movie quality setting

IMPORTANT!

Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction.

The camera also records audio along with FHD(30p) and STD movies. Note the following points when shooting a movie. Take care that the microphone is not blocked by your

fingers, etc. Good audio recording results are not possible when the

camera is too far away from what you are trying to record.

Shooting movies for long periods in areas where temperature is relatively high can cause digital noise (dots of light) to appear in the movie image. A rise in the cameras internal temperature also may force movie recording to stop automatically. If this happens, stop recording and allow the camera to cool down, which should cause normal operation to resume.

Use of the cameras built-in memory or certain types of memory cards can slow down processing speeds. In particular, high-quality movies may not be able to be stored correctly. A slow memory card can take too much time to record data and result in breaks in the image and/or audio during playback.

NOTE Zoom operations are disabled during movie recording. To use zoom, perform the

zoom operation before you press [0] (Movie) to start recording. You can focus at a particular point before starting movie recording. On the

controller screen, touch the location where you want to focus, and then start recording.

The Make-up function cannot be used during movie recording.

Microphone

55 Advanced Recording Settings

Advanced Recording Settings The following are menu operations you can use to configure various camera settings.

. Example Menu Screen Operation

1. In the REC mode, touch (Show Icons).

2. Touch MENU. This will display the menu screen. Menu contents are different in the REC mode and

PLAY mode.

3. Touch the tab where the menu item you want to configure is located.

4. Flick upwards and downwards until you find the item whose setting you want to change. To cancel and exit the menu, touch or press the controllers shutter button.

5. Touch the item.

6. Configure the setting of the item in accordance with the screen contents. To navigate back to the previous menu level, touch .

NOTE Depending on the recording mode, some of the items on the menu that appears

may not be usable. Nothing will happen if you touch an unusable item.

. Menu Operations in This Manual Menu operations are represented in this manual as shown below. Touch the indicated icons and items, and perform operations as they are indicated, from left to right.

Using the REC Menu

Tabs Items

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Touch Shooting

56 Advanced Recording Settings

Procedure

Enter the REC mode * MENU * r REC MENU Tab * Make-up

Make-up enables adjustment of human skin tone hues and texture, and softening of facial shadows caused by harsh sunlight for better looking portraits.

NOTE Make-up is disabled while shooting with the following feature.

High Speed CS, Art Shot

Procedure

Enter the REC mode * MENU * r REC MENU Tab * Touch Shooting

When you touch a location on the screen, the camera focuses on that location and shoots.

NOTE When using Touch Shooting to focus, select AF or Macro as the focus mode

(page 62). If the focus frame remains red while the AF Only setting is selected, it means that

the image is not in focus (because the subject is too close, etc.) If this happens, point the camera at the subject and try focusing again.

Touch Shooting cannot be used while the camera is configured with either of the settings below. Recording Mode: High Speed CS Prerecord

Recording Beautiful Portraits (Make-up)

Skin Tone Tan +6 to 0 (Off) to Light +6

Smooth Skin 0 (Off) to +12 (Max.)

Shooting by Touching the Monitor Screen (Touch Shooting)

AF + Shoot The camera performs Auto Focus at the spot you touch and then shoots.

AF Only The camera performs Auto Focus at the spot you touch and locks focus (Focus Lock).

Off Touch Shooting disabled.

57 Advanced Recording Settings

Using Focus Lock Use focus lock when you want to focus on a particular person or object. To use focus lock, configure the camera settings below. Touch Shooting: AF Only Focus Mode: AF or Macro

1. Touch the subject you want to focus on.

2. When you are ready to shoot the image, press the shutter button.

NOTE Focus lock also locks exposure (AE) and white balance. Focus lock is cancelled if you touch the screen, or about five minutes after focus

lock is activated.

Procedure

Enter the REC mode * MENU * r REC MENU Tab * Movie Anti Shake

You can reduce blur due to camera movement during movie recording by selecting the (Standard) or (Strong) setting. However, image anti-shake is not used. Also, Anti Shake results in a narrower angle of view during movie recording.

NOTE Movie Anti Shake is not supported during High Speed Movie recording.

Reducing Blur Due to Camera Movement During Movie Recording (Movie Anti Shake)

Focus frame

Subject to be focused on

58 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Image Size

This setting can be used to configure snapshot image size.

The initial factory default image size setting is 12M (12 million pixels). You should regard the print paper sizes suggested here as guidelines only (200 dpi

print resolution).

. Pixels and image size A digital camera image is a collection of small dots called pixels. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer pixels when printing an image (L size) through a print service, attaching an image to e-mail, when viewing the image on a computer, etc. The size of an image indicates how many pixels it contains, and is expressed as horizontal pixelsxvertical pixels.

Note that larger images have more pixels, so they take up more memory space. For information about image size and number of images that can be stored, see

page 150. For information about movie image size, see page 150.

Changing the Image Size (Image Size)

Image Size (Pixels)

REC Screen Icon Display

Suggested Print Size and Application

Description

12M (4000x3000)

Poster Print Good detail for better clarity even for images cropped from the original on a computer, etc.

5M (2560x1920)

A4 Print Good detail

Pixel

59 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Movie Quality

This setting can be used to configure movie image quality settings and to select either normal movie recording or High Speed Movie recording. For information about movie image quality settings, see page 52.

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Brightness

You can manually adjust an images exposure value (EV value) before shooting it. The exposure compensation value you set remains in effect until you change it.

Exposure Compensation Range: 2.0 EV to +2.0 EV Unit: 1/3 EV

To cancel exposure compensation, change the EV value to 0.0.

NOTE When shooting under very dark or very bright conditions, you may not be able to

obtain satisfactory results even after performing exposure compensation.

Movie Image Quality Settings (Movie Quality)

Correcting Image Brightness (Brightness)

Decreases the EV value. A lower EV value is best for dark-color subjects and for shooting outdoors on a clear day.

Increases the EV value. A higher EV value is best for light-colored subjects and backlit subjects.

60 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * White Balance

You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.

1. Touch the type of white balance you want to select. You can see the affect of the white balance setting you select on the monitor screen.

When Auto WB is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the white balance setting that matches your shooting conditions (Daylight, Overcast, etc.).

When shooting with Premium Auto Pro, the white balance setting is fixed at Auto WB.

Adjusting White Balance (White Balance)

Setting Description

Auto WB Configures the camera to adjust white balance automatically

Daylight For shooting outdoors on a clear day

Overcast For shooting outdoors on an overcast rainy day, in the shade, etc.

Shade For shooting on a clear day in the shade of trees or buildings

Day White Fl. For shooting under white or day white fluorescent lighting

Daylight Fluor For shooting under daylight fluorescent lighting

Tungsten For shooting under light bulb lighting

Manual WB

For configuring the camera manually to suit a particular light source.

Touch Manual WB.

In the location where you plan to shoot, point the camera at a blank white piece of paper so it fills the entire monitor screen.

Touch an area of the screen where no icon is located.

The white balance setting is retained even if you turn off the camera.

'

Blank white paper

61 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * ISO

ISO sensitivity is a measure of sensitivity to light.

Since higher ISO sensitivity values tend to result in digital noise in images, the camera performs a noise filtering process. Because of this, it may take relatively longer for the camera to finish recording an image after it is shot. You will not be able to perform any operation while image recording is in progress.

When shooting with Premium Auto Pro, the ISO setting is fixed at Auto.

Specifying ISO Sensitivity (ISO)

Setting Description

Auto Adjusts sensitivity automatically according to conditions

ISO64 Lower sensitivity

Higher sensitivity

Slow shutter speed

Fast shutter speed (Set for shooting in dimly lit

areas.)

Less noise

Some coarseness (increased digital noise)

ISO100

ISO200

ISO400

ISO800

ISO1600

ISO3200

62 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Focus

Changing to a different focus mode can help to achieve better focus.

*1 The focus range is the distance from the lens surface. *2 Focus remains fixed at the position where it was when movie recording started. *3 Some time may be required to focus.

NOTE The focus mode is fixed as AF (Auto Focus) while shooting with Premium Auto

Pro.

Selecting a Focus Mode (Focus)

Settings REC Screen Icon Display

Type of Shot Focus Mode Approximate Focus Range*1

Snapshot Movies Snapshot Movies

AF (Auto Focus)

None General recording

Automatic

Fixed focal point

10 cm to 9 (infinity) (3.9" to 9)

46 cm to 9 (infinity) (18.1" to 9)

Macro Close ups Automatic 3 cm to 10 cm (1.2" to 3.9")*3

3 cm to 10 cm (1.2" to 3.9") *2, 3

PF (Pan Focus)

Shooting with a relatively wide focus range

Fixed focal point

Fixed focal point

55 cm to 9 (infinity) (21.7" to 9)

46 cm to 9 (infinity) (18.1" to 9)

63 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Mirror Image

Turning on this function displays the controller monitor image as a mirror image. This comes in handy when using the controller to compose self-shot images. The image is recorded in normal orientation (not mirror imaged).

NOTE You can change an image displayed on the screen to a mirror image by flicking the

image.

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Wind Noise Cut

Select On to reduce wind noise during movie recording. Note, however, that this will also cause the sound quality to change.

Self-shooting (Mirror Image)

Reducing Wind Noise during Movie Recording (Wind Noise Cut)

Normal image Mirrored image

64 Advanced Recording Settings

Procedure

Enter the REC Mode * MENU * r REC MENU Tab * Review

While Review is turned on, the camera will display an image immediately after it is recorded.

NOTE A Type 2 review image is displayed when High Speed CS is selected as the

recording mode, even if Type 1 is selected for the Review setting.

Turning on Image Review (Review)

Type 1 Displays a full-screen view of the image for about one second.

Type 2

Displays a review image in the lower left corner (when the controller is in landscape orientation) or the upper left corner (in portrait orientation) of the controller monitor screen. Touching the Review image will enter the PLAY mode and display a full-screen view of the image.

Off Turns off review image display

65 Viewing Snapshots and Movies

Viewing Snapshots and Movies

See page 38 for the procedure for viewing snapshots.

1. Touch (PLAY) to enter the PLAY mode.

2. Flick left or right across the screen image to scroll through the movies until the one you want is displayed.

3. Touch (Movie) to start playback. To switch to full-screen view, touch the monitor screen.

NOTE Playback may not be possible for movies not recorded with this camera. When a movie is played back on the camera, the audio output from the camera

speaker will be out of sync with the video image. This does not indicate any problem with the movie file. Also, playback on the camera uses a low frame rate. Send the movie to a smartphone for better movie playback results.

Viewing Snapshots

Viewing a Movie

Movie icon:

Movie recording time

Image quality

Playback in progress Playback paused

Touch .

Touch .

Progress bar

66 Viewing Snapshots and Movies

The image menu shows multiple images on a single screen.

1. In the PLAY mode, touch or squeeze your fingers on the screen. This displays the image menu. Touch , , or flick upwards or downwards

to scroll to the next page of images. To view the normal (single image) display mode,

touch the image your want to view. In the case of a movie, the first image in the movie

is displayed. CS images and images shot with Interval Shooting are displayed as grouped

images. A question mark (?) will be displayed for images that cannot be displayed for

some reason.

Snapshots can be zoomed on the monitor screen up to 4X.

1. In the PLAY mode, flick left or right to display the image you want to view.

2. Touch the center of the screen or spread your thumb and forefinger (page 20) on the displayed image to enlarge it. Dragging an enlarged screen image will change the part of the image that is

displayed. Touching or squeezing your thumb and forefinger (page 20) on the

displayed image will reduce it in size.

Viewing the Image Menu

Zooming an On-screen Image

67 Viewing Snapshots and Movies

You can configure camera settings to automatically select snapshot and movie highlights, and create a movie of them. Images included in a Highlight Movie are selected based on their highlight scores and shooting condition information recorded along with the images. You can use the Highlight Score function (page 71) to change the highlight score of

a snapshot. The playback time and effects applied to the Highlight Movie are automatically

determined based on the shooting condition information recorded along with the images included in the movie and their highlight score.

1. In the PLAY mode, touch (Show Icons).

2. Touch the (Edit) icon.

3. Touch (Highlight Movie) icon. Touching will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until Highlight Movie is displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Highlight Movie.

5. Touch .

6. Touch an item and then change its setting.

7. After settings are the way you want, touch (Back) to return to the screen in step 5.

8. Touch or to select the date or Interval Shooting for which you want to create a Highlight Movie, and then touch it.

Creating a Movie of a Days Images (Highlight Movie)

Date Images are selected from among those shot on a specific date.

Interval Group Images are selected from among those in a group of Interval Shooting images (page 47).

Max Play Time Specify the playback time of the Highlight Movie.

Music Select the background music you want to use.

68 Viewing Snapshots and Movies

9. Touch Yes. This creates and save the Highlight Movie, and displays it on the monitor screen. Touching Cancel while creation of a Highlight Movie is in progress will stop

Highlight Movie creation. No movie is saved if you stop Highlight Movie creation.

NOTE An image whose highlight score is 0 is never included in a Highlight Movie. A Highlight Movie is FHD(30p) movie quality, with an aspect ratio of 16:9. If an

image with an aspect ratio that is not 16:9 is incorporated into a Highlight Move, the top and bottom of the image will be cropped as required.

If a portrait orientation image is incorporated in to a Highlight Movie, there will be black bands on the left and right of the image.

When there is a total of more than 9,999 snapshot and movie files shot on the same date, Highlight Movie will select photos and movies from the files numbered 1 to 9999.

Depending on the number of files and other factors when a Highlight Movie is being created, the creation operation may take some time.

Only FHD(30p) quality movies that have been recorded with this camera, with a CASIO EX-FR100, or with a CASIO EX-FR10 camera can be used in a Highlight Movie. Even if a movie was recorded with this camera, it cannot be used in a Highlight Movie if it is HS240 or STD quality.

69 Viewing Snapshots and Movies

You can configure camera settings to automatically select snapshot highlights and generate a collage of them. The snapshots included in a Highlight Photo are selected automatically based on their high light scores and shooting condition information recorded along with the snapshots. You can use the Highlight Score function (page 71) to

change the highlight score of a snapshot.

1. In the PLAY mode, touch (Show Icons).

2. Touch the (Edit) icon.

3. Touch . Touching will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until Highlight Photo is displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Highlight Photo.

5. Touch , to select the date or Interval Shooting for which you want to create a Highlight Photo.

6. Touch , to display the layout you want to use, and then touch it.

7. Touch Apply. This displays the Highlight Photo and saves it in camera memory. Touching Cancel while creation of a Highlight Photo is in progress will stop

Highlight Photo creation. The screen that appears after the image is saved includes a (Shuffle)

icon. Touching the shuffle icon creates a Highlight Photo using different snapshots. This also deleted the previously created Highlight Photo.

8. Touch to exit Highlight Photo.

Creating a Collage of a Days Snapshots (Highlight Photo)

Date Images are selected from among those shot on a specific date.

Interval Group Images are selected from among those in a group of Interval Shooting images (page 47).

70 Viewing Snapshots and Movies

NOTE An image whose highlight score is 0 is never included in a Highlight Photo. When there are more than 9,999 snapshots shot on the same date stored on the

memory card, Highlight Photo will select photos from those numbered 1 to 9999. The Highlight Photo operation may not be possible while battery power is low.

71 Viewing Snapshots and Movies

You can use the procedure below to change the highlight score of a snapshot or movie.

1. In the PLAY mode, touch (Show Icons).

2. Touch the (Edit) icon.

3. Touch the (Highlight Score) icon.

4. Flick the screen upwards or downwards to scroll through highlight scores until the one you want to delete is displayed, and then touch to select it.

5. Touch the score you want to assign to the selected image. You can flick the screen left or right to scroll to another image and change its

score as well.

6. After changing the highlight score of the image, touch to return to the main screen.

NOTE The highlight score function can be used only with snapshots and movies recorded

with this camera. The highlight score of a protected image cannot be changed.

Changing the Highlight Score of an Image (Highlight Score)

Highlight Score

Description

No score assigned (default) An image with this score may be selected for a Highlight Snapshot or Highlight Movie.

An image with this score is given priority for Highlight Snapshot or Highlight Movie selection.

An image with this score is never selected for a Highlight Snapshot or Highlight Movie.

72 Viewing Snapshots and Movies

This function creates a Time Lapse Movie up to 10 minutes long by combining snapshots shot with the camera on a particular date, in the order they were shot.

1. In the PLAY mode, touch (Show Icons).

2. Touch the (Edit) icon.

3. Touch the (Time Lapse) icon. Touching will display a detailed explanation about image editing functions.

Flick upwards or downwards on the monitor screen until Time Lapse is displayed, and then touch its icon.

4. Select how images should be chosen for conversion to a Time Lapse Movie.

5. Touch .

6. Touch an item and then change its setting.

7. After settings are the way you want, touch (Back) to return to the screen in step 5.

8. Use (touch) the up and down arrows ( , ) to display the recording date or Interval Shooting of the images you want to use to create a Time Lapse Movie.

9. Touch Yes. This creates and displays the Time Lapse Movie. Touching Cancel while creation of a Time Lapse Movie is in progress will

cancel the creation process.

Creating a Time Lapse Movie (Time Lapse)

Date Create a Time Lapse Movie for a specific date.

Interval Group Create a Time Lapse Movie for group of Interval Shooting images (page 47).

Playback Speed Specify the playback time of each image. Selecting Slow specifies a longer playback time for each image, while Fast specifies a shorter playback time.

Music Select the background music you want to use.

73 Viewing Snapshots and Movies

NOTE A Time Lapse Movie is FHD(30p) movie quality, with an aspect ratio of 16:9. If an

image with an aspect ratio that is not 16:9 is incorporated into a Time Lapse Movie, the top and bottom of the image will be cropped as required.

If a portrait orientation image is incorporated in to a Time Lapse Movie, there will be black bands on the left and right of the image.

When there is a large number of images, this function will stop processing when the Time Lapse Movie reaches a length of 10 minutes. Subsequent images will not be converted to a Time Lapse Movie.

Highlight Photos are not included in Time Lapse Movies. Depending on the number of files and other factors when a Time Lapse Movie is

being created, the creation operation may take some time.

74 Other Playback Functions (PLAY)

Other Playback Functions (PLAY) The following are menu operations you can use to configure various camera settings.

. Example Menu Screen Operation

1. In the PLAY mode, touch (Show Icons).

2. Touch MENU. This will display the menu screen. Menu contents are different in the REC mode and

PLAY mode.

3. Touch the tab where the menu item you want to configure is located.

4. Touch the item whose setting you want to change.

5. Configure the setting of the item in accordance with the screen contents. To navigate back to the previous menu level, touch .

. Menu Operations in This Manual Menu operations are represented in this manual as shown below. Touch the indicated icons and items, and perform operations as they are indicated, from left to right.

Using the PLAY Menu

Tabs Items

Procedure

Enter the PLAY Mode * MENU * Rotation

75 Other Playback Functions (PLAY)

Procedure

Enter the PLAY Mode * MENU * Rotation

1. Flick left or right to display the image you want to rotate.

2. Touch . This will rotate the image 90 degrees to the left.

3. When the image is in the orientation you want, touch .

NOTE Note that this procedure does not actually change the image data. It simply alters

how the image is displayed on the cameras monitor screen.

Rotating an Image (Rotation)

76 Connecting the Camera with a Smartphone (Wireless Connection)

Connecting the Camera with a Smartphone (Wireless Connection)

Your camera has both Bluetooth wireless technology and wireless LAN capabilities built in. After establishing a wireless connection with a smartphone, you can perform the operations described in the table below. Requires installation of the EXILIM Connect app on your smartphone. Your camera can connect using

Bluetooth wireless technology with a smartphone that supports Bluetooth low energy technology. Note that the Bluetooth wireless technology that connects your camera with a smartphone is different from the Bluetooth wireless technology that connects the camera with the controller.

Controlling Your Camera with a Smartphone

With this function: You can do this:

Auto Send

Images can be automatically sent to a smartphone that has been Bluetooth wireless technology paired with the camera (page 88).

Shoot with phone

Remotely control and shoot with the camera using a smartphone (page 85).

Send to phone

Send snapshots and movies recorded with your camera to your smartphone. After sending an image to a smartphone, you can then upload it from the smartphone to a social networking service (page 86).

77 Connecting the Camera with a Smartphone (Wireless Connection)

IMPORTANT!

Inside an aircraft or anywhere else where use of wireless communication is restricted or prohibited, do not use this camera.

Some smartphone models may not be able to play back movie files from your camera.

While there is a connection between the camera and smartphone, recording by pressing the cameras shutter button or [0] (Movie) button is not supported.

Depending on your smartphone model, its operating system version, and/or its remaining storage capacity can cause failure of a movie or snapshot save operation. Receiving a camera file, perform the required operation on your smartphone to check if the file was stored properly.

Location information is not added to snapshot data stored in camera memory. A movie received on an Android terminal:

Movies are not displayed by Gallery app. Movies are stored in a folder named EXILIM Connect.

A separate movie player is required to playback movies (whose files have the file name extension MOV).

Depending on your movie player, you may not be able to playback movies and/ or audio.

Images recorded on another manufacturers camera cannot be sent using this function.

NOTE Note that using wireless functions requires more battery power usage than normal.

Make sure that the camera battery is sufficiently charged before starting a wireless LAN operation.

The operating range depends on the local communication environment and on the type of smartphone you are connected to.

View on phone View snapshots stored in camera memory on a smartphone, and copy snapshots and movies to a smartphone for viewing. You can also view snapshots and movies in camera memory on a computer, and copy them to a computer (page 87).

Add location info to snapshots

Configure settings to have a smartphone add shooting location information (latitude, longitude) to snapshots when they are sent from the camera (page 91).

With this function: You can do this:

78 Connecting the Camera with a Smartphone (Wireless Connection)

. About EXILIM Connect For detailed information about EXILIM Connect, refer to the EXILIM Connect Users Guide (which you can download at the website below). http://www.exilim.com/manual/ Note that to view the EXILIM Connect Users Guide (PDF), you will have to install

Adobe Reader. Consult CASIO authorized service center if you are unable to open to display the PDF format Users Guide.

Note that EXILIM Connect Users Guides may not be available in all languages. If you cannot find a EXILIM Connect Users Guide in your native language, please use a version in another language.

79 Connecting the Camera with a Smartphone (Wireless Connection)

Your camera has a variety of different wireless modes. Select the wireless mode that suits your specific requirements.

1. Touch (Show Icons).

2. Touch the (Wireless) icon. This will display the wireless mode screen.

3. Touch the wireless mode you want. To exit the wireless mode, touch .

Using a Wireless Mode

Send to phone

Select to view images you shoot with the camera on a smartphone (pages 86, 87).

Pairing

Select this mode to establish a Bluetooth wireless technology connection between the camera and a smartphone (page 81).

Shoot with phone

Select this mode for remote control of image recording from a smartphone (page 85).

Wireless settings

Select this mode to configure wireless settings (page 88).

(Wireless)

80 Connecting the Camera with a Smartphone (Wireless Connection)

Installing the EXILIM Connect Smartphone app on your smartphone makes it possible to remotely control the camera from your smartphone and to send images recorded with the camera to your smartphone. Search the EXILIM Connect app on Google Play or App Store and install it on your smartphone.

. App operation guarantees No guarantees are made concerning the ability to operate the EXILIM Connect app on any particular smartphone or tablet.

IMPORTANT!

App functions and the required operating environment are subject to change without notice.

. Android terminal

1. Open Play Store (Google Play).

2. In the search field, type EXILIM Connect.

3. Install EXILIM Connect.

. iPhone (iOS)

1. Open App Store.

2. In the search field, type EXILIM Connect.

3. Install EXILIM Connect.

Getting Ready to Establish a Connection between a Smartphone and Your Camera

For information about OS versions (Android and iOS) supported by the EXILIM Connect app, visit the Google Play or the App Store download site, or the Official CASIO Digital Camera Website (http://www.exilim.com/).

Installing the EXILIM Connect App on Your Smartphone

81 Connecting the Camera with a Smartphone (Wireless Connection)

The first time you establish a wireless connection between the camera and a smartphone, you need to use the procedure below to configure wireless connection settings. This operation is required for the first connection only.

. Smartphone that supports Bluetooth low energy technology Connecting the camera to a smartphone using Bluetooth wireless technology (pairing) makes it simple to configure wireless connection settings.

IMPORTANT!

Performing this operation automatically configures your smartphones wireless LAN connection settings (page 83).

Your camera can be paired with a single smartphone at one time. Some smartphone models may not be compatible with this camera. If you want to re-pair the camera with the smartphone it is already paired with, first

unpair them and then pair again. Re-pairing the camera and smartphone will result in all pending unsent images to remain unsent.

Camera (Controller) Operation

1. Touch the (Wireless) icon. This will display the wireless mode screen.

2. Touch Pairing.

3. Touch Start. You can start pairing by performing an operation on the camera, without using

the controller.

On the camera, hold down [p] (Power) for about two seconds to turn off power.

On the camera, hold down [p] (Power) for about six seconds. The cameras operation lamp will flash amber.

Smartphone Operation

4. Start up the EXILIM Connect app.

5. Tap Pairing.

Establishing a Wireless Connection for the First Time

82 Connecting the Camera with a Smartphone (Wireless Connection)

6. On the smartphone, tap the cameras name you want to pair with. This completes pairing of the camera and smartphone, and establishes a Bluetooth wireless technology connection. In the case of an Android terminal, wireless LAN connection settings are also

configured automatically. In this case, advance to step 10 of this procedure. If the screen shown in step 10 is not displayed, use the smartphones Wi-Fi settings to select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

In the case of an iPhone (iOS), you need to configure wireless LAN settings (install a profile) next. Advance to step 7 of this procedure.

7. On the smartphone, tap Install. Follow the instructions that appear on the smartphone to install the profile required for wireless LAN setup. On some smartphone models, the passcode input screen may appear. If this

happens, input your smartphones passcode.

8. After installation of the profile is complete, tap Done on the smartphone.

9. On the smartphone screen, tap Back to App. This establishes a wireless LAN connection between the camera and smartphone. If you are using an iPhone (iOS) and there is no wireless LAN connection

between the camera and smartphone, use the smartphones Wi-Fi settings to select the cameras SSID to establish a wireless LAN connection between the camera and smartphone.

10. On the smartphone, tap OK.

11. Follow the instructions that appear on the smartphone to complete the pairing operation.

NOTE Auto Send (page 88) will be turned on after you configure wireless connection

settings on the camera and smartphone. Turning off the camera also terminate the Bluetooth wireless technology

connection.

83 Connecting the Camera with a Smartphone (Wireless Connection)

. Smartphone that does not support Bluetooth low energy technology

Configure smartphone wireless LAN connection settings (input the camera SSID and password).

1. Touch the (Wireless) icon.

2. Touch Shoot with phone.

3. Touch Start. This will enable connection with a smartphone and the camera will display a screen for input of an SSID and password, and cameras wireless LAN connection lamp will flash blue.

4. For the smartphones Wi-Fi settings, enter the cameras SSID and password to establish a wireless LAN connection between the camera and smartphone. When the smartphone establishes a wireless LAN connection with the camera, the cameras wireless LAN connection lamp lights blue and the message Start up the phone app. appears on the controllers monitor screen. What you need to do to establish a wireless LAN connection depends on the

type of smartphone you are using. For details about how to establish a wireless LAN connection see the user documentation that comes with your smartphone.

The camera SSID (which cannot be changed) and password (initial default) are shown below. SSID: FR100-XXXXXX (6-character alphanumeric ID) Password: 00000000

5. On the smartphone, start up EXILIM Connect.

NOTE You can also use the procedure below to establish a wireless LAN connection

between the camera and smartphone.

On the camera, hold down [p] (Power) for about two seconds to turn off power. On the camera, while holding down [0] (Movie), hold down [p] (Power) for

about one second. The cameras wireless LAN connection lamp will flash blue.

On the smartphone, select the cameras SSID.

SSID

Password

84 Connecting the Camera with a Smartphone (Wireless Connection)

. What to do if you are unable to establish a wireless LAN connection between the camera and a smartphone.

This problem may be caused when the smartphone is already wirelessly connected to one of the networks or devices below. Go to your smartphones Wi-Fi settings and select this cameras SSID. Household wireless LAN Public wireless LAN Portable wireless LAN device

85 Connecting the Camera with a Smartphone (Wireless Connection)

This function lets you remotely shoot a snapshot or movie with the camera using a smartphone. You also can perform remote zoom and other operations as well.

NOTE When using a smartphone to shoot with the camera, you can add location

information obtained by the smartphone to the image data. For information about how to do this, refer to the EXILIM Connect Users Guide (page 78).

. Bluetooth Wireless Technology Connection

1. Perform one of the operations below. Enter the sleep mode.

Turn on the camera and controller.

On the controller, press [p] (Power). This will enter the sleep mode, which is indicated by the cameras operation lamp slowly flashing green.

Display the wireless mode screen.

Touch (Show Icons). Touch the (Wireless) icon.

2. On the smartphone, start up the EXILIM Connect app.

3. On the smartphone, tap Remote Capture.

4. Compose the image on the smartphones screen as you shoot.

For information about how to use Shoot with phone, refer to the EXILIM Connect manual (page 78).

. Cannot Connect with Bluetooth Wireless Technology

1. Touch the (Wireless) icon.

2. Touch Shoot with phone.

3. Touch Start. If there is a wireless LAN connection between the smartphone and camera,

advance to step 5 of this procedure.

4. For the smartphones Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

5. On the smartphone, start up the EXILIM Connect app.

Using a Smartphone as a Camera Remote Controller (Shoot with phone)

86 Connecting the Camera with a Smartphone (Wireless Connection)

6. Compose the image on the smartphones screen as you shoot.

For information about how to use Shoot with phone, refer to the EXILIM Connect manual (page 78).

You can select one more snapshot and/or movie file in camera memory and send it to a smartphone. You can select up to 50 files, totaling no more than 500MB for a single send. After sending an image to a smartphone, you can then upload it to a social networking service.

1. Touch the (Wireless) icon.

2. Touch Send to phone.

3. Touch Send Selected Image.

4. Touch the image you want to send to the smartphone. Selecting the image of a file causes its check box to become selected. To exit the send image to smartphone operation, touch Cancel.

5. After selecting the images of all of the files you want to send to the smartphone, touch OK. For information about how to use Send Selected Image, refer to the EXILIM Connect manual (page 78).

Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image)

87 Connecting the Camera with a Smartphone (Wireless Connection)

You can connect the camera to a smartphone over wireless LAN to view and download snapshots and movies in camera memory on up to eight connected smartphones. You can also view snapshots and movies in camera memory on a computer, and copy them to a computer. A smartphone does not need to have the EXILIM Connect app installed in order to access camera images using this function.

1. Touch the (Wireless) icon.

2. Touch Send to phone.

3. Touch View on phone. This establishes a connection between the smartphone and camera, and displays a URL. If the message Connect your phone to the access point below. remains on

the cameras monitor screen, change the smartphones Wi-Fi settings so your camera is selected for connection (page 81).

4. On the smartphone, start up its browser app. Accessing the URL displayed by the camera will

display an image stored in camera memory. To exit the wireless LAN function, touch Exit on

the cameras monitor screen.

IMPORTANT!

Some smartphone models may not be able to play back movie files.

NOTE You can also view image in camera memory on a computers browser by

establishing a wireless LAN connection with the computer. For information about how to start up EXILIM Connect and view images, refer to

the EXILIM Connect manual (page 78). Note that the operation you need to perform depends on whether or not there is a Bluetooth wireless technology connection with the smartphone.

Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)

URL

88 Connecting the Camera with a Smartphone (Wireless Connection)

This section explains wireless mode operations and setting items.

1. Touch the (Wireless) icon. This will display the wireless mode screen. Pressing the shutter button will return to the screen that was displayed before

the wireless mode screen.

2. Touch Wireless settings. This will display the wireless setting screen.

3. Touch the item you want to configure.

4. Change the setting of the selected item. Changing a setting returns to the wireless mode screen.

Procedure

(Wireless) * Wireless settings * Auto Send

While On is selected for this setting, images are sent to the paired smartphone automatically. Images are sent to the smartphone while the camera is in the sleep mode. If there is no wireless connection between the camera and smartphone, the images will be sent as soon as a connection is established. The cameras wireless LAN connection lamp will be flashing or lit while an image

send operation is in progress. The lamp will go out after the image send operation is complete.

IMPORTANT!

Auto Send cannot be enabled unless the camera is paired with a smartphone (page 81).

Images recorded with Interval Shooting cannot be automatically sent to a smartphone using Auto Send.

Configuring Wireless Connection Settings

Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)

89 Connecting the Camera with a Smartphone (Wireless Connection)

NOTE Auto Send can be used only with a smartphone that supports Bluetooth low energy

technology. Both a Bluetooth and wireless LAN connection are required between the camera and smartphone to auto send camera images.

You can specify the size of the image sent to the smartphone using Resize When Sending (page 90).

You can use the smartphone apps below to view snapshots after sending them. iPhone: Camera Roll Android terminal: Gallery, Photo, or another photo browser app

Images shot while the Auto Send setting is On will be sent to the smartphone, even if the Auto Send setting is changed to Off before they are sent.

If the connection between the camera and smartphone is terminated while there are still unsent images, Auto Send will be cancelled. The next time the camera and smartphone are turned on and the camera enters the Sleep Mode, the Auto Send operation will restart.

If you delete an image that has not yet been sent to the smartphone, it will not be included in the next Auto Send.

Procedure

(Wireless) * Wireless settings * Auto Send File Settings

Specifies the files to be sent to a smartphone by Auto Send.

IMPORTANT!

The maximum size movie file that can be sent by Auto Send is 100 MB. Auto Send File Settings cannot be configured unless the camera is paired with a

smartphone (page 81).

Specifying Images to be Sent by Auto Send (Auto Send File Settings)

T Snapshots and movies are sent.

T Only Only snapshots are sent.

90 Connecting the Camera with a Smartphone (Wireless Connection)

Procedure

(Wireless) * Wireless settings * Resize When Sending

This feature can be use to resize snapshots before they are sent to a smartphone using Shoot with phone or Send to phone.

NOTE Resizing is supported for images recorded with this model camera only.

Resizing Snapshots before Sending Them to a Smartphone (Resize When Sending)

3M Images are converted to 3M size before being sent. If an original image is 3M size or smaller, it is sent without

resizing.

Off Images are sent in the size they were originally recorded.

91 Connecting the Camera with a Smartphone (Wireless Connection)

Procedure

(Wireless) * Wireless settings * Location info

You can enable the setting below to have the smartphone acquire and record location information (latitude and longitude) when you shoot a snapshot with the camera. Then when you send the snapshot to the smartphone, the location information will be added to it. Note that location information is not added to movies or to images shot automatically with Interval Shooting.

IMPORTANT!

Location information can be recorded only while there is a Bluetooth wireless technology connection between the camera and smartphone.

To select On for the cameras Location info setting, pair the camera with a smartphone (page 81).

While On is selected for Location info, the smartphone acquires and records location information each time you shoot a snapshot with the camera.

Location information is not added to snapshot data stored in camera memory. It is added when the snapshot is sent to the smartphone.

To use this function, your smartphones location services must be enabled, and it must be where location information can be received. Location information will not be available to add to images if the smartphone is unable to receive location information.

You can check whether or not location information was added successfully on the smartphones image receive screen.

Up to 10,000 location records can be maintained by the smartphone. If there are already 10,000 records, shooting a new snapshot will cause the oldest location record to be deleted to make room for the new one.

Enabling location-based services causes the location information, and other personally identifiable information to be included in the snapshot data. Take care when sharing or publishing such images on web services, etc.

This camera is not designed to be used for navigation, surveying, or other activities that require precision instruments.

Add Location Info to Snapshots (Location info)

On Smartphone acquires and records location information when a snapshot is shot, and adds it to the image data when the snapshot is sent to the camera.

Off Location information is not acquired or added.

92 Connecting the Camera with a Smartphone (Wireless Connection)

Procedure

(Wireless) * Wireless settings * WLAN password

Use procedure to change the password you used when establishing a wireless LAN connection between the camera and a smartphone.

IMPORTANT!

Before changing the wireless LAN password, unpair the camera from its paired smartphone (page 93).

1. Touch the password digit you want to change.

2. Touch or to change the currently selected digit.

3. When the password is the way you want, touch OK.

NOTE Changing the wireless LAN password will terminate the connection with the

smartphone. To reconnect with the smartphone, configure wireless connection settings (page 81). If your smartphone does not support Bluetooth low energy technology, perform the operations below to change your smartphones Wi-Fi settings. iPhone:

Tap the right arrow of the field where the SSID of the camera is displayed in the Wi-Fi settings to delete network settings. After deleting, select the camera SSID again and input the new password.

Android terminal: Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and select Forget. Select the camera SSID again and input the new password.

Changing the Camera Password for Wireless LAN Connection (WLAN password)

93 Connecting the Camera with a Smartphone (Wireless Connection)

Procedure

(Wireless) * Wireless settings * Unpairing

Unpairs the camera from a smartphone. To use the camera with a different smartphone, first unpair it from the current smartphone.

NOTE When unpairing, be sure also to perform the unpairing operation on the

smartphone as well. For details, refer to the EXILIM Connect Users Guide (page 78).

Unpairing the camera from a smartphone will result in all pending unsent images to remain unsent.

Unpairing the Camera from a Smartphone (Unpairing)

94 Printing

Printing

There are a variety of different ways to print images stored on a computer. This section shows one standard printing example.

. Printing on a Windows Computer

1. Use the procedure under Viewing and Storing Images on a Computer (page 96) to store the image you want to print, and then display the image on your computer screen.

2. Click Print and then Print.

3. Configure the desired print settings and then click Print.

. Printing on a Macintosh

1. Use the procedure under Connecting the Camera to Your Computer and Saving Files (page 99) to store the image you want to print, and then display the image on your Macintosh screen.

2. Click File and then Print.

3. Configure print settings and then click Print. This will print the selected image.

Professional Print Service

You can take a memory card that contains the images you want to print to a professional print service and have them printed.

Printing on a Home Printer

You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer.

Printing with a Computer

After transferring the images to your computer, use commercially available software to print.

Printing with a Computer

95 Using the Camera with a Computer

Using the Camera with a Computer

You can perform the operations described below while the camera is connected to a computer.

The procedures you need to perform are different for Windows and the Macintosh.

The above recommended computer system environments do not guarantee proper operation.

The type of computer being used, certain settings, and other installed software may interfere with proper operation.

Things you can do using a computer...

Save images to a computer and view them there

Save images and view them manually (USB connection) (pages 96, 99).

Play back and edit movies

You can play back movies (pages 98, 101).

To edit movies, use commercially available software as required.

Windows users should refer to Using the Camera with a Windows Computer on page 95.

Macintosh users should refer to Using the Camera with a Macintosh on page 99.

Using the Camera with a Windows Computer

When you want to do this:

Operating System Version

Required Software

Save images to a computer and view them there manually

Windows 10, Windows 8.1, Windows 7, Windows Vista

Installation not required.

Play movies

Windows 10, Windows 8.1, Windows 7

Windows Media Player 12

Windows Vista

Software that can play movie files with the file name extension MOV. You may need to download the software on the Web.

96 Using the Camera with a Computer

You can connect the camera to your computer in order to view and store images (snapshot and movie files).

IMPORTANT!

Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.

NOTE You also can use your computers card slot (if it has one) or a commercially

available card reader to access image files directly from the cameras memory card. For details, see the user documentation that comes with your computer.

. To connect the camera to your computer and save files

1. On the camera, hold down [p] (Power) for about two seconds to turn off power. Next, use the micro USB cable that comes with the camera to connect it to your computers USB port. For details about connecting to

the camera and precautions when connecting, see page 25.

2. Press [p] (Power) to turn on the camera. When you turn on the camera, check to make sure that the color of its operation lamp changes from red to green or amber (page 25). Note that in this case the monitor screen will remain blank. The first time you connect the camera to your computer with the USB cable, an

error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

Viewing and Storing Images on a Computer

Never use your computer to modify, delete, move, or rename any image files that are in the cameras built-in memory or on its memory card. Doing so can cause problems with the cameras image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

USB

Micro USB cable (included with camera)

[USB] port

97 Using the Camera with a Computer

3. Windows 10 users: Click Start and then Explorer. Next, in the sidebar, click PC. Windows 8.1 users: Click Desktop and then Explorer. Windows 7, Windows Vista users: Click Start and then Computer.

4. Double-click Removable Disk. Your computer recognizes the memory card loaded in the camera (or built-in

memory if there is no card) as a removable disk.

5. Right-click the DCIM folder.

6. On the shortcut menu that appears, click Copy.

7. Windows 10, Windows 8.1 users: Click Documents. Windows 7, Windows Vista users: Click Start and then Documents. If you already have a DCIM folder in Documents, the next step will overwrite

it. If you want to keep the existing DCIM folder, you need to change its name or move it to a different location before performing the next step.

8. Windows 10, Windows 8.1 users: On the Documents menus, click Home and then Paste. Windows 7, Windows Vista users: On the Documents menu, click Organize or Edit, and then Paste. This will paste the DCIM folder (and all the image files it contains) into your Documents folder. You now have a copy of the files that are in camera memory on your computer. After copying images, it is recommended that you right-click the DCIM folder

and change its name to something else.

9. After you finish copying images, disconnect the camera from the computer. After the copy or read progress dialog on the computers screen indicates that the process is complete, close the displayed image and then disconnect the USB cable.

98 Using the Camera with a Computer

. To view images you copied to your computer

1. Double-click the copied DCIM folder to open it.

2. Double-click the folder that contains the images you want to view.

3. Double-click the image file you want to view. For information about file names, see Memory Folder Structure on page 103. An image that was rotated on the camera will be displayed on your computer

screen in its original (unrotated) orientation. Viewing CS and interval shot images on a computer will individually display the

component images in the group. CS and interval shooting images cannot be viewed as a group on a computer.

. Movie Playback Precautions To play back a movie, first save it to your computer and then double-click the movie

file. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.

Proper movie playback may not be possible on some computers. If you experience problems, try the following. Quit any other applications you have running, and stop resident applications.

99 Using the Camera with a Computer

The above recommended computer system environments do not guarantee proper operation.

Proper operation depends on the level of performance of the computer you are using.

IMPORTANT!

Never unplug the USB cable, or operate the camera while viewing or storing images. Doing so can cause data to become corrupted.

The camera does not support operation with Mac OS X 10.0 to 10.4. Operation is supported with Mac OS 10.5 to 10.12 (using the OS standard USB driver) only.

NOTE You also can use your computers card slot (if it has one) or a commercially

available card reader to access image files directly from the cameras memory card. For details, see the user documentation that comes with your computer.

Using the Camera with a Macintosh

When you want to do this: Operating System Version

Required Software

Save images to your Macintosh and view them there manually

OS X Installation not required.

Play movies OS X 10.5 or higher

QuickTime Player (installed on computer)

Connecting the Camera to Your Computer and Saving Files

Never use your computer to modify, delete, move, or rename any image files that are in the cameras built-in memory or on its memory card. Doing so can cause problems with the cameras image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity. Whenever you want to modify, delete, move, or rename an image, do so only on images that are stored on your computer.

100 Using the Camera with a Computer

. To connect the camera to your computer and save files

1. On the camera, hold down [p] (Power) for about two seconds to turn off power. Next, use the micro USB cable that comes with the camera to connect it to your computers USB port. For details about connecting to

the camera and precautions when connecting, see page 25.

2. Press [p] (Power) to turn on the camera. When you turn on the camera, check to make sure that the color of its operation lamp changes from red to green or amber (page 25). Note that in this case the monitor screen will remain blank. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the cameras built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using. The first time you connect the camera to your Macintosh with the USB cable,

an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

3. Double-click the cameras drive icon.

4. Drag the DCIM folder to the folder to which you want to copy it.

5. After the copy operation is complete, drag the drive icon to Trash.

6. Disconnect the camera from the computer. After the copy or read progress dialog on the computers screen indicates that the process is complete, close the displayed image and then disconnect the USB cable.

USB

Micro USB cable (included with camera)

[USB] port

101 Using the Camera with a Computer

. To view copied images

1. Double-click the cameras drive icon.

2. Double-click the DCIM folder to open it.

3. Double-click the folder that contains the images you want to view.

4. Double-click the image file you want to view. For information about file names, see Memory Folder Structure on page 103. An image that was rotated on the camera will be displayed on your Macintosh

screen in its original (unrotated) orientation.

. Movie Playback Precautions To play back a movie, first save it to your computer and then double-click the movie

file. Proper movie playback may not be possible for data accessed over a network, from a memory card, etc.

Proper movie playback may not be possible on some Macintosh models. If you experience problems, try the following. Shut down other applications that are running.

102 Using the Camera with a Computer

The camera creates a file each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. For details about how folders are organized in memory, see Memory Folder

Structure (page 103).

You can view folder and file names on your computer. For details about how file names are displayed on the cameras monitor screen, see page 11.

The total number of folders and files allowed depends on the image size and quality, and capacity of the memory card being used for storage.

Files and Folders

Name and Maximum Number Allowed Example

File

Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.

26th file name:

Folders

Folders are named from 100CASIO to 999CASIO. There can be up to 900 folders in memory.

First folder name:

CIMG0026.JPG

Extension Serial number (4 digits)

100CASIO

Serial number (3 digits)

103 Using the Camera with a Computer

The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF).

. About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. Transferring this cameras DCF-compliant images to another manufacturers

camera and view them. Printing this cameras DCF-compliant images on another manufacturers printer. Transferring another cameras DCF-compliant images to this camera and view

them.

. Memory Folder Structure Memory

DCIM Folder Recording Folder Image File Movie File

Recording Folder Recording Folder

Created after execution of Auto Send or other function with EXILIM Connect. Recording information

. Supported Image Files Image files shot with this camera DCF-compliant image files

This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this cameras monitor screen.

Memory Card Data

DCIM

EXILIM EX_CNCT

100CASIO CIMG0001.JPG CIMG0002.MOV

101CASIO 102CASIO

104 Using the Camera with a Computer

. Built-in Memory and Memory Card Data Handling Precautions Whenever copying memory contents to your computer, you should copy the DCIM

folder and all of its contents. A good way to keep track of multiple DCIM folders is to change their names to dates or something similar after you copy them to your computer. If you later decided to return a DCIM folder to the camera, however, be sure to change its name back to DCIM. The camera is designed to recognize only a root file with the name DCIM. Note the camera also will not be able to recognize the folders inside the DCIM folder unless they have the names they originally had when you copied them from the camera to your computer.

Folders and files must be stored in accordance with the Memory Folder Structure shown on page 103 in order for the camera to be able to recognize them correctly.

105 Other Settings (Set Up)

Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode.

Procedure

MENU * Setup Tab * Screen

You can use the following procedure to change the brightness of the monitor screen.

Procedure

MENU * Setup Tab * Info

Selecting On displays setup status and other information.

For information about menu operations, see page 55.

Adjusting Monitor Screen Brightness (Screen)

+2 Brightness that is greater than +1, which makes the screen easier to view. This setting consumes more power.

+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.

0 Normal monitor screen brightness for indoor use, etc.

1 Screen brightness for viewing in a dark environment without disturbing others around you.

2 Brightness that is darker than 1, which makes the screen easier to view in dark locations.

Selecting Display Information (Info)

106 Other Settings (Set Up)

Procedure

MENU * Setup Tab * Rotation Lock

You can use this setting to fix the orientation of the camera or controller screen image, or allow the orientation to be detected and automatically rotated as required.

NOTE Certain playback environment may cause images to be displayed using the wrong

orientation.

Procedure

MENU * Setup Tab * Camera Sound

You can adjust the volume of the sound emitted when the camera is turned on, when an image is shot, when an error occurs, etc.

Regardless of this setting, no recording sound is emitted during an Interval Shooting operation.

Locking the Camera or Controller Screen Orientation (Rotation Lock)

Camera

Off

The camera detects its orientation when you are shooting, and stores orientation information along with the image data. During playback of an image, it is displayed in accordance with the orientation information.

On The camera does not detect its orientation, and images are always stored in landscape orientation.

Controller

Off Display image is rotated according to the controller orientation.

On Display image orientation is fixed at where it was when On is selected for the controllers Rotation Lock setting.

Configuring Camera Sound Settings (Camera Sound)

High volume

Low volume

107 Other Settings (Set Up)

Procedure

MENU * Setup Tab * Vibration

While On is selected for this function, the controller will vibrate whenever any one of the events described below occurs. When a Type 1 review image is displayed on the controller immediately after

shooting When communication between the camera and controller is lost When an error occurs While focus is locked

Procedure

MENU * Setup Tab * Adjust

1. Touch the value you want to change (year, month, day, hour, minute).

2. Touch or to change the currently selected value. You can specify a date from 2001 to 2049. To switch between 12-hour and 24-hour format,

touch the 12/24 hour switch icon. Touching and holding or scrolls at high

speed.

3. Touch OK.

NOTE While the camera is connected to a smartphone with the EXILIM Connect app, you

can execute auto date and time adjustment. The cameras time zone will be changed automatically in accordance with the smartphones time zone. For details, see the EXILIM Connect Users Guide (page 78).

Using the Vibration Function (Vibration)

Setting the Cameras Clock (Adjust)

12/24 hour switch icon

108 Other Settings (Set Up)

Procedure

MENU * Setup Tab * Date Style

You can select from among three different styles for the date.

Example: July 10, 2017

Procedure

MENU * Setup Tab * Language

. Specify the display language you want.

1. Flick upwards and downwards until you find the language you want, and then touch to select it.

Camera models sold in certain geographic areas may not support display language selection.

Procedure

MENU * Setup Tab * Sleep

Use this function to specify how much time should be allowed to laps until the controller display goes blank and the controller enters the sleep state. You can specify either 30 seconds (30 sec), 1 minute (1 min) or 5 minutes (5 min).

Specifying the Date Style (Date Style)

YY/MM/DD 17/7/10

DD/MM/YY 10/7/17

MM/DD/YY 7/10/17

Specifying the Display Language (Language)

Specifying the Controller Sleep State Trigger Time (Sleep)

109 Other Settings (Set Up)

Procedure

MENU * Setup Tab * Format

If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. The format operation will delete all contents on the memory card or in built-in

memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it.

Formatting built-in memory or a memory card will delete all protected images stored there.

Check the battery level before starting a format operation and make sure it is not too low. Formatting may not be performed correctly and the camera may stop operating normally if the camera powers down while formatting is in progress.

Procedure

MENU * Setup Tab * Reset

See page 141 for details about the cameras factory default settings. The settings below are not reset. Clock settings, date style, screen language, WLAN password

NOTE Resetting the camera does not unpair it from a smartphone (page 81).

Formatting Built-in Memory or a Memory Card (Format)

Resetting the Camera to Factory Defaults (Reset)

110 Other Settings (Set Up)

Procedure

MENU * Setup Tab * Version

Selecting this menu item displays the camera model name, the version of firmware installed on the camera. Check this screen after updating the cameras firmware to confirm that updating

was actually performed.

Checking the Current Camera Firmware Version (Version)

111 Appendix

Appendix

*DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury.

*WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.

*CAUTION This indication stipulates matters that have the risk of causing injury as well as matters for which there is the likelihood of occurrence of physical damage only if the product is operated incorrectly while ignoring this indication.

Symbol Examples

Safety Precautions

! This circle with a line through it (-) means that the indicated action must not be performed. Indications within or nearby this symbol are specifically prohibited. (The example at left indicates that disassembly is prohibited.)

$ The black dot (0) means that the indicated action must be performed. Indications within this symbol are actions that are specifically instructed to be performed. (The example at left indicates that the power plug must be unplugged from the electrical socket.)

*DANGER

. Built-in Rechargeable Battery To charge the battery, use only the method specifically described in this

manual. Attempting to charge the battery by an unauthorized means creates the risk of battery overheating, fire, and explosion.

Do not expose or immerse the battery in fresh water or salt water. Doing so can damage the battery, and cause deterioration of its performance and loss of service life.

The battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.

+

%

+

112 Appendix

Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. Never use or leave the battery near open flame. Do not expose the battery to heat or fire. Make sure the battery is oriented correctly when charging it. Never carry or store the battery together with items that can conduct electricity

(necklaces, pencil lead, etc.). Never disassemble the battery, pierce it with a needle, or expose it to strong

impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never place the battery into a microwave oven, dehumidifier, high-pressure generating device, etc.

Never remove the outer sticker from the battery. Do not use or leave the battery under direct sunlight, in an automobile

parked in the sun, or in any other area subject to high temperatures. Doing so can damage the battery, and cause deterioration of its performance and loss of service life. Also, these conditions can cause the battery to swell to the point that you may not be able to remove it.

Battery fluid can damage your eyes. Should battery fluid get into your eyes accidentally, immediately rinse them with clean tap water and then consult a physician.

*DANGER

-

-

+

113 Appendix

*WARNING

. Smoke, abnormal odor, overheating, and other abnormalities Continued use of the camera while it is emitting smoke or strange odor,

or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera.

* If the camera will not turn off for some reason, press the [RESET] button (page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Keep Away From Fire Never expose the camera to fire, which can cause it to explode and

creates the risk of fire and personal injury.

. Avoid Use While In Motion Never use the camera to record or play back images while operating an

automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident.

. USB-AC Adapter Misuse of USB-AC adapter creates the risk of fire and electric shock. Be sure to

observe the following precautions. Use only the specified USB-AC adapter. Never use the USB-AC adapter with another device. Use a power outlet that matches the power supply specified for the

USB-AC adapter. Never plug the USB-AC adapter or power cord into a wall outlet that is shared

by other devices, or into a shared extension cord. Never locate the USB-AC adapter near a stove or other heating device.

Misuse of the USB-AC adapter can cause them to become damaged, creating the risk of fire and electric shock. Be sure to observe the following precautions. Never place heavy objects on the USB-AC adapter or subject it to

direct heat. Do not modify the USB-AC adapter, allow it to become damaged, or

forcibly bend it. Do not twist or pull on the power cord. When in use, locate the cord where it will not be tripped over.

+

-

-

-

-

114 Appendix

Never touch the power plug while your hands are wet. Doing so creates the risk of electric shock.

Should the power cord or power plug become damage, contact your retailer or nearest CASIO authorized service center.

Do not use the USB-AC adapter in areas where liquids* might spill on them. Liquids create the risk of fire and electric shock. * Liquids: Water, sports drinks, seawater, animal or pet urine, etc.

Do not place a flower vase or any other liquid container on top of the USB-AC adapter. Water creates the risk of fire and electric shock.

Do not touch the camera or USB-AC adapter during lightning storms.

If a power cord was included with your camera The power cord that comes with the camera is designed for use in the

country where the camera was purchased. If you use the camera in another country, be sure to use a power cord that conforms to that countrys ratings and power supply voltage. Use of an improper power cord creates the risk of fire and electric shock.

Before going out, be sure to unplug the USB-AC adapter from the power outlet and put in a place away from objects used by animals and pets. An animal or pet chewing on the power cord can cause it short, leading to the risk of fire.

. Water and Foreign Matter Water, other liquids, or foreign matter (especially metal) getting inside

the camera creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. Particular care is required when using the camera where it is raining or snowing, near the ocean or other body of water, or in a bathroom. 1. Turn off the camera.

* If the camera will not turn off for some reason, press the [RESET] button (page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Disassembly and Modification Except when disposing of the camera, never try to take it apart or modify

it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your retailer or nearest CASIO authorized service center.

*WARNING

" + -

% 1

+

+

%

!

115 Appendix

. Dropping and Rough Treatment Continued use of the camera after it is damaged by dropping or other

rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera.

* If the camera will not turn off for some reason, press the [RESET] button (page 8).

2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet.

3. Contact your retailer or nearest CASIO authorized service center.

. Memory Cards Memory cards are small and present a risk of accidentally being

swallowed by infants and young children. Keep memory cards out of the reach of infants and young children. If a memory card is ever swallowed accidentally, contact a physician immediately.

. Precaution when Camera is On Do not touch the camera for long periods while it is on. The camera

becomes warm when on, and long term contact creates the risk of low- temperature burns.

. Interference with other digital devices Should you notice radio interference or other problems on other devices

is being caused while using this product, do not use the wireless functions of this product. Use of wireless functions creates the risk of radio interference and abnormal operation of other devices.

When in a medical facility or aircraft, comply with instructions of personnel in charge. Electromagnetic waves and other signals emitted by the cameras wireless function create the risk of accident.

Do not use the cameras wireless function while in the vicinity of high precision digital devices or digital devices that use weak signals. Doing so can interfere with proper operation of such digital devices and create the risk of accident.

When using the cameras wireless function, keep it away from any person wearing a pacemaker. Magnetism emitted by the camera may affect cardiac pacemakers and other medical devices. Should you ever notice any abnormality, immediately move away from the product and contact a physician.

On a crowded train or any other crowded location where there is the possibility of being in the vicinity of a person wearing a cardiac pacemaker, turn off the camera. Radio waves emitted by the cameras wireless function may affect pacemaker operation.

*WARNING

-

+

+

-

+

-

+

+

116 Appendix

*CAUTION

. USB-AC Adapter Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make

sure you observe the following precautions. Never cover the USB-AC adapter or power cord with a quilt, blanket,

or other cover while it is in use, and do not use it near a heater. Doing so can interfere with heat radiation and cause the area around them to become hot.

Do not use detergent when cleaning the power cord, the USB-AC adapter, or the USB cable (especially the plugs and jacks).

Insert the power plug into the wall outlet as far as it will go. Unplug the power plug from the wall outlet before leaving the camera

unattended for long periods, such as when leaving on a trip, etc. At least once a year, use a cloth or vacuum cleaner to clean any dust build up

on the prongs of the power plug and in the area around them. (Power cord included with your camera) When unplugging from the wall outlet,

never pull on the power cord. Grasp the power plug and pull.

. Built-in Rechargeable Battery If battery charging does not end normally within the specified charging

time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion.

Be sure to read the user documentation that comes with the camera before using or charging the battery.

Store batteries in a location that cannot be reached by infants and young children. When using a battery where infants and young children are present, be on guard to ensure that they do not have the chance to remove the battery from the camera.

Do not leave batteries near areas used by pets. A pet chewing on a battery can lead to accidents caused by the battery leaking, overheating, or exploding.

Should fluid from a battery accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin irritation.

. Connections Never plug any devices that are not specified for use with this camera

into connectors. Connecting a non-specified device creates the risk of fire and electric shock.

. Unstable Locations Never place the camera on an unstable surface, on a high shelf, etc.

Doing so can cause the camera to fall, creating the risk of personal injury.

-

+

+

+ +

-

+

-

-

117 Appendix

. Locations To Be Avoided Never leave the camera in any of the following types of locations. Doing so

creates the risk of fire and electric shock. Areas subject to large amounts of humidity or dust Food preparation areas or other locations where oil smoke is present Near heaters, on a heated carpet, in areas exposed to direct sunlight,

in a closed vehicle parked in the sun, or other areas subject to very high temperatures

. Monitor Screen Do not apply strong pressure to the LCD panel surface or subject it to

strong impact. Doing so can cause the display panel glass to crack and lead to personal injury.

Should the monitor screen ever become cracked, never touch any of the liquid inside the monitor screen. Doing so creates the risk of skin inflammation.

Should monitor screen liquid ever get into your mouth, immediately rinse your mouth out and contact your physician.

Should monitor screen liquid ever get into your eyes or onto your skin, immediately rinse with clean water for at least 15 minutes and contact your physician.

. Backing Up Important Data Always keep backup copies of important data in camera memory by

transferring it to a computer or other storage device. Note that data can be deleted in the case of camera malfunction, repair, etc.

*CAUTION

-

-

1

+ +

+

118 Appendix

This camera is designed to be shock resistant, splashproof, and dustproof as described below.

0Shock resistant: Passes testing based on CASIO independent standards*1 formulated according to MIL-Standard 810F Method 516.5-Shock.*2

*1 Drop testing of the camera and controller individually from a height of 1.7 meters (5.58 feet) onto plywood (lauan), 10 directions (6 faces, 4 corners) (1.3 meters (4.27 feet) when camera and controller are combined)

*2 Though the camera is designed to withstand the effects of impact occurring during normal daily use, very strong impact due to very rough handling such as throwing the camera or dropping it from excessive heights can result in serious damage. Even if a drop does not result in functional problems, it can cause scratching and other cosmetic damage to the camera.

0Splashproof: Splashproof equivalent to IEC/JIS Class 8 (IPX8)*3 and Class 6 (IPX6). Allows continuous use during immersion in water to a depth up to 1.5 meters (4.92 feet) for 60 minutes*4 and protection against jet spray from all directions.*5

*3 Signifies underwater use when immersed for a duration and at a pressure specified by CASIO. Touch panel operation is not supported under water.

*4 Test conditions defined by CASIO. *5 Use during high-speed travel on water during motor sports, while riding a

personal watercraft, etc. is not supported. 0Dustproof:

Corresponds to IEC/JIS Protection Class 6 (IP6X) dustproofing.

IMPORTANT!

The shock resistance, splashproofing, and dustproofing of this product are based on CASIO test results, and do not constitute any guarantee that the product will perform, will not be damaged, or will not malfunction under such conditions.

. Precautions before Underwater Use This camera can be used to shoot images underwater up to a depth of 1.5 meters (4.92 feet). However, the following precautions should be kept in mind before using the camera underwater. When shooting in water or in an area where water droplets are getting on the

camera, the lens may fog while shooting or the next time you use the camera to record images. This can be avoided by placing the camera, with its covers open, into a plastic bag along with commercially available silica gel before shooting. This will dry the interior of the camera and avoid lens fogging.

Check the contact surfaces of the [CARD] cover and [USB] cover gaskets for dirt, sand, and any other foreign matter. Clean contact surfaces by wiping them with a soft, clean, dry cloth. Note that a single strand of hair or a single grain of sand can allow water to leak into the camera.

Check the [CARD] cover and [USB] cover splashproofing gaskets are free of cracks, scratches, and other damage.

Shock resistant, Splashproof, Dustproof

119 Appendix

Close the [CARD] cover and [USB] cover securely into place. Never open or close the [CARD] cover or [USB] cover while near water or in an

area exposed to sea breezes. Also avoid opening or closing the covers while your hands are wet. Such conditions can cause fogging of the lens when shooting.

This camera will sink if dropped underwater. Use the strap or some other means to avoid dropping.

The splashproofing of this camera protects it against salt water and fresh water only. Protection is not provided against hot spring water.

Never leave the camera for long periods in a location subjected to very low temperatures or very high temperatures in excess of 40C (104F). In particular, avoid leaving the camera in areas exposed to strong direct sunlight, in a motor vehicle on a hot day, etc. Any of these conditions can result in a deterioration of splashproofing.

Wireless communication with wireless LAN or Bluetooth wireless technology is not supported under water. Connection between a submerged camera and a controller or smartphone is not supported.

Use of the controllers touch panel is not supported while the controller is submerged.

. Precautions during Underwater Use The camera is designed for use at depths no greater than 1.5 meters (4.92 feet)

and at water temperatures within the range of 0C to 40C (32F to 104F). Do not leave the camera submerged for more than 60 minutes. When repeatedly immersing the camera for underwater user, allow at least

15 minutes to elapse between immersions. Never open the [CARD] cover or [USB] cover while the camera is submerged. Do not dive into water while holding the camera. Also, do not use the camera in

rapids, under a waterfall, or in any other rough water condition. Exposing the camera to strong water pressure can cause leaking and malfunction.

Take care that you do not drop the camera into water or allow it to strike the surface of the water. Doing so can cause leaking.

. Precautions after Underwater Use Before opening the [CARD] cover and [USB] cover, use a clean, dry, soft cloth to

wipe the camera free of all moisture and dirt. If you open the [CARD] cover and [USB] cover while the camera is wet, be sure to

wipe its inside surfaces free of all moisture before closing it. Allowing the covers to remain wet can cause fogging of the lens when shooting.

120 Appendix

. Cleaning after Use Perform the following steps to clean the camera after using it under water or after it becomes soiled with sand, dirt, or mud. Note that the [CARD] cover and [USB] cover must be closed securely when performing these steps.

1. Immerse the camera in fresh water. Fill a bucket or other container with tap water or other fresh

water, and immerse the camera for about 10 minutes. Gently wipe dust, dirt, sand, and other matter from the camera with your fingers.

Do not rub the lens surface or monitor screen while dirty.

2. Wipe off all moisture. Use a clean, dry, soft cloth to wipe the camera dry. Moisture may remain on the

[CARD] cover and [USB] cover, even after you finish wiping the camera dry. With the covers open, leave the camera in the shade in a well-ventilated location to dry thoroughly. Closing the covers while they are still wet can cause fogging of the lens when shooting.

IMPORTANT!

The temperature of the water used to wash the camera should be no greater than 30C (86F). Never use detergent, hot water, or strongly running water to clean the camera. Doing so creates the risk of leaking and malfunction.

Never swing the camera around to remove water, and never use a dryer or other intense heat to dry it.

Never place the camera in a washing machine to wash it.

. Precautions after Use Do not leave the camera in an area exposed to extreme heat (40C (104F) or

greater) or cold (less than 5C (23F)). Doing so can cause loss of splashproofing. Never use chemical agents for the purpose of cleaning, rust proofing, moisture

proofing, etc. Doing so can cause loss of splashproofing. Use fresh water to clean the camera within 60 minutes after using it underwater.

Failure to do so can cause deterioration of the exterior finish and splashproofing properties.

In order to maintain splashproofing, replacement of the cameras gaskets is recommended once each year. Note that you will be charged for gasket replacement. Contact a CASIO authorized service center or your original retailer for gasket replacement.

121 Appendix

. Other Precautions The accessories that come with the camera are not splashproof. Subjecting the camera to extreme impact can cause loss of splashproofing. Moisture on the camera can freeze in very cold environments. Ice left on the

camera can lead to malfunction. Do not allow moisture to remain on the camera under cold conditions.

Should water ever leak into the camera and cause malfunction due to improper use, CASIO COMPUTER CO., LTD. will not be held liable for any damage to internal components (battery, recording media, etc.), loss of recorded data, or any expenses incurred to shoot lost images.

CASIO COMPUTER CO., LTD. shall not be held liable for any accident that may occur while the camera is being used underwater.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or for any accident (personal injury, etc.) that occurs while using the camera underwater.

122 Appendix

. Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. Removing the memory card while the camera is performing some operation Removing the memory card while the operation lamp is lit green after turning off the

camera Disconnecting the USB cable while communication is in progress Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen (page 148). Perform the action indicated by the message that appears.

. Operating Environment Operating Temperature Requirements: 5 to 40C (23 to 104F) Operating Humidity: 10 to 85% (non condensation) Do not place the camera in any of the following locations.

In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand Near heating or cooling devices, or in other areas subjected to extreme changes

in temperature or humidity Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration

. Condensation Sudden and extreme temperature changes, such as that which occurs when

moving from the outdoors on a cold winter day into a warm room, can cause water droplets called condensation to form on interior and exterior surfaces, creating the risk of malfunction. To prevent condensation from forming, seal the camera in a plastic bag before changing locations. Leave the bag sealed to allow the air inside to naturally change to the same temperature as the air in the new location. After that, remove the camera from the bag and leave it in the new environment for a few hours.

Opening and closing a camera cover in an area while in a warm room or an area where moisture is high can result in warm or moist air getting into the camera, and clouding of the lens when shooting. This can be avoided by placing the camera, with its covers open, along with commercially available silica gel, into a plastic bag to dry the interior of the camera before shooting.

Precautions During Use

123 Appendix

. Lens Never apply too much force when cleaning the surface of the lens. Doing so can

scratch the lens surface and cause malfunction. You may sometimes notice some distortion in certain types of images, such as a

slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera.

. Caring for your camera Never touch the lens with your fingers. Finger smudges, dirt, and other foreign

matter on the lens can interfere with proper operation of the camera. Use a blower or other means to keep the lens and flash window free of dirt and dust, and wipe gently with a soft, dry cloth.

To clean the camera, wipe it with a soft, dry cloth.

. Closing the cameras [CARD] cover or [USB] cover When closing a cover, press down with your thumbs on the left and right, applying equal force. Pressing down on either end with one hand only may not close the cover completely and leave one end out of position.

. Precautions During Wireless Function (Wireless LAN, Bluetooth Wireless Technology) Use

Operation of this product may affect or may be affected by nearby devices that use wireless functionality.

This product is subject to the Export Administration Regulations (EAR) of the United States, and so it cannot be exported to or brought into countries that fall under U.S. Embargoes and Other Special Controls.

Radio transmission interception The radio waves that are used to send and receive data can be intercepted by third parties.

Unauthorized access CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized access and/or use of the access point equipped on this product if the product is ever lost or stolen.

Use as a wireless device Use the wireless function of this product only as specifically described in this manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD. shall be held in no way liable for any damages arising out of unintended use.

[CARD] cover or [USB] cover

124 Appendix

Magnetism, electrostatic charge, and radio interference Do not use this product near a microwave oven or any other area where magnetism, electrostatic charge, or radio interference is generated. Radio wave reception may be poor in certain environments. Also note that other devices using the same 2.4GHz band used by this product may cause reduced processing speeds in both devices.

Connection to a public LAN This product does not support wireless LAN connection over a public wireless LAN environment.

Intended Areas of Use This camera is intended for use in countries or areas listed at the website linked below. http://world.casio.com/r-law/dc/ Even if you are in a country or area whose name is included in the list at the website linked above and even if your camera model is the same at the one described in this manual, your camera may not comply with radio laws and other laws in your area or country if you purchased a model intended for another country or area on the Internet, etc. In this case, it is up to you to determine if your camera can be used legally in your country or area. Use of this camera in a country or area other than where it was originally purchased runs the risk of being in violation of local radio laws and other laws. Note that CASIO COMPUTER CO., LTD. shall not be held in any way liable for any such violations.

. Other Precautions The camera becomes slightly warm during use. This is normal and does not indicate malfunction.

. Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment. Regardless of whether such files are purchased by you or obtained for free, posting them on a website, a file sharing site, or any other Internet site, or otherwise distributing them to third parties without the permission of the copyright holder is strictly prohibited by copyright laws and international treaties. For example, uploading or distributing on the Internet images of TV programs, live concerts, music videos, etc. that were photographed or recorded by you may infringe upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.

The following terms, which are used in this manual, are registered trademarks or trademarks of their respective owners.

125 Appendix

Note that trademark and registered trademark are not used within the text of this manual. microSDXC Logo is a trademark of SD-3C, LLC. Windows, Windows Vista, Windows 7, Windows 8.1, and Windows 10 are

registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

Macintosh, Mac OS, QuickTime and iPhone are trademarks of Apple Inc. Adobe and Reader are either registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or other countries. Android and Google Play are trademarks or registered trademarks of Google Inc. App Store is a service mark of Apple Inc. iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United

States. Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD. is under license. Other trademarks and trade names are those of their respective owners.

This software is based in part on the work of the Independent JPEG Group. EXILIM and EXILIM Connect are registered trademarks or trademarks of CASIO

COMPUTER CO., LTD. All other company or product names mentioned herein are registered trademarks

or trademarks of their respective companies.

Any and all unauthorized copying, distribution, and transfer for commercial purposes of the software provided by CASIO for this product are prohibited.

126 Appendix

. Open Source Software This product includes software that is licensed under the license conditions below.

OpenVG 1.1 Reference Implementation

Copyright (c) 2007 The Khronos Group Inc.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and /or associated documentation files (the "Materials "), to deal in the Materials without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Materials, and to permit persons to whom the Materials are furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Materials.

THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.

bluedroid 5.0.0_r2

Copyright (c) 2014 The Android Open Source Project Copyright (C) 1998-2014 Broadcom Corporation

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction,

127 Appendix

and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

128 Appendix

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or,

129 Appendix

within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

130 Appendix

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

bluedroid 5.0.0_r2

Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved.

LICENSE TERMS

The redistribution and use of this software (with or without changes) is allowed without the payment of fees or royalties provided that:

1. source code distributions include the above copyright notice, this list of conditions and the following disclaimer;

2. binary distributions include the above copyright notice, this list of conditions and the following disclaimer in their documentation;

3. the name of the copyright holder is not used to endorse products built using this software without specific written permission.

DISCLAIMER

This software is provided 'as is' with no explicit or implied warranties in respect of its properties, including, but not limited to, correctness and/or fitness for purpose.

libhardware 5.0.0_r2

Copyright (c) 2005-2014, The Android Open Source Project

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

131 Appendix

See the License for the specific language governing permissions and limitations under the License.

Apache License Version 2.0, January 2004 http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions

132 Appendix

to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and

133 Appendix

attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

134 Appendix

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

135 Appendix

. If the camera or controller operation lamp starts flashing red... If the camera or controller operation lamp starts flashing red during charging, it means that further charging is not possible for one of the reasons below. Perform the actions described below to correct the problem and then try charging again.

Ambient temperature or the temperature of the battery is abnormally high or low Unplug the USB cable from the camera and wait for a while until the camera is within the temperature range of 15C to 35C (59F to 95F), and then try charging again.

Safety timer activated A battery that has not been used for a long time, certain types of computers, and connection conditions can cause charging to take longer than normal. If charging takes for about five hours, a safety timer will terminate it automatically, even if the battery is not fully charged. If the battery has not been used for a very long time, charging may terminate automatically after only about 60 minutes.

1) Using a battery that has not been used for a long time. Disconnect and then reconnect the USB cable to resume charging.

2) Insufficient power supply when connected to computer The camera can be charged only via a USB 2.0 standard USB port. Connect directly to a USB port what supplies a current of 500mA.

For details about the power supply capacity of a computers USB port, contact the manufacturer of the computer. Though disconnecting and then reconnecting the USB cable will resume charging, you may need to do so repeatedly if the power supply capacity of the computer is low.

Power Supply

Charging

If problems persist after you perform the above steps or if the battery fails to charge after 5 hours, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center.

136 Appendix

. Precautions during Use Operation provided by a battery under cold conditions is always less than operation

under normal temperatures. This is due to the characteristics of the battery, not the camera.

Charge the battery in an area where the temperature is within the range of 15C to 35C (59F to 95F). Outside this temperature range charging can take longer than normal or even fail.

. Storage Precautions Storing the battery for a long time while it is charged can cause deterioration of

battery characteristics. If you do not plan to use a battery for some time, fully use up its charge before storing it.

To prevent over discharging of an unused battery, fully charge it, and then load it in the camera and fully use up the charge about once every six months.

. Precautions during Use The bundled USB-AC adaptor is designed for operation with any power supply in

the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power plug depends on each country or geographic area. Before taking the camera and USB-AC adaptor along on a trip, check with travel agent about the power supply requirements in your destination(s).

Do not connect the USB-AC adaptor to a power supply through a voltage converter or similar device. Doing so can lead to malfunction.

Battery Precautions

Using the Camera in another Country

137 Appendix

When disposing of the camera and controller, be sure to first remove its built-in lithium ion battery and send it in for recycling.

IMPORTANT!

The battery of this camera is built-in and cannot be replaced by you. Contact your retailer or a CASIO authorized service center to have the battery replaced.

Make sure that the camera is turned off before removing the battery. The edges of the back cover are sharp. Take care not to cut your fingers when

removing it. When removing screws, use a precision Phillips tip screwdriver.

. Camera

1. Remove the four screws that secure the back of the camera.

2. Remove the back cover.

3. Hook your fingertip at the location indicated in the illustration and remove the battery.

Disposing of the Camera

138 Appendix

. Controller

1. Remove the four screws that secure the back of the controller.

2. Holding the back cover in the circled area, rotate in the direction of the arrow to remove the cover.

3. Rotate the cover on the end of the controller in the direction indicated by the arrow to remove it.

4. Remove the six screws that secure the back of the controller.

5. Holding the monitor screen at the circled location in the nearby illustration, swing it upwards in the direction indicated by the arrow to remove it.

139 Appendix

6. Hook your fingertip at the location indicated in the illustration and lift the battery up to remove it.

. Old Rechargeable Battery Handling Precautions Insulate the positive and negative terminals with tape, etc. Do not peel the covering off of the battery. Do not try to take the battery apart.

140 Appendix

See page 32 for information about supported memory cards and how to load a memory card.

. Using a Memory Card If a memory card starts to behave abnormally during image playback, you can

restore normal operation by reformatting it (page 109). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office.

As you record data to and delete data from a memory card a number of times, it loses its ability to retain data. Because of this, periodic re-formatting of a memory card is recommended.

Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Make sure that you always back up important data on other media (CD-R, CD-RW, hard disk, etc.).

. Memory Card Handling Precautions Certain types of memory cards can slow down processing speed. Whenever possible use an Ultra High-Speed Type memory card. Note, however, that not all operations can be guaranteed even if an Ultra High-Speed Type memory card is used. Certain movie quality settings can result in too much time being required to record data, which can result in breaks in the image and/or audio during playback.

Using a Memory Card

141 Appendix

The tables in this section show the initial default settings on menus that appear in the REC mode and PLAY mode when you reset the camera (page 109). A dash () indicates an item whose setting is not reset or an item for which there is

no reset setting.

IMPORTANT!

Some menu items may not be available, depending on the recording mode being use.

. REC Menu

* Default setting depends on country or geographic region.

. PLAY Menu

Reset Initial Default Settings

Make-up Skin Tone: 0 (Off) Smooth Skin: 0 (Off)

Touch Shooting AF + Shoot

Movie Anti Shake

Standard

Image Size 12M

Movie Quality FHD(30p)

Brightness 0.0

White Balance Auto WB

ISO Auto

Focus AF

Mirror Image Off

Wind Noise Cut Off

Review Type 2

Rotation

142 Appendix

. Setup Menu

. Wireless settings

Auto Send Off

Auto Send File Settings

T Only

Resize When Sending

3M

Location info Off

WLAN password

Unpairing

Screen 0

Info On

Rotation Lock

Camera: Off Controller: Off

Camera Sound

Vibration On

Adjust

Date Style

Language

Sleep 5 min

Format

Reset

Version

143 Appendix

When things dont go right...

Troubleshooting

Problem Possible Cause and Recommended Action

Power Supply

Power does not turn on.

1)The battery of new camera is not charged. Charge the battery before using the camera.

2)The camera battery may be dead. Charge the battery (page 21). If this does not resolve the problem, contact your retailer or a CASIO authorized service center.

The camera suddenly powers down.

1)The battery may be dead. Charge the battery (page 21). 2)The cameras protection function may have activated

because camera temperature is too high. Turn off the camera and wait until it cools down before trying to use it again.

3)If, after you turn on power, the operation lamp flashes red and power turns off, it could mean a lens error or some other error occurred. Check to make sure that the battery is charged and try turning power on again a number of times. If power still does not turn on, contact your retailer or a CASIO authorized service center.

Power will not turn off. Nothing happens when a button is pressed.

Use a thin object to press the [RESET] buttons (page 8) near the cameras memory card slot and controllers [USB] port to turn the camera off and then turn on the camera again.

Charging

The operation lamp does not light red and the battery wont charge.

1)Unplug the USB cable from the camera and controller, and then plug it back in again.

2)Make sure the camera and controller are turned off when you connect the USB cable. Charging may not start if you connect the USB cable while power is turned on.

Image Recording

Image is not recorded when the shutter button is pressed.

1)If the camera is in the PLAY mode, touch (REC) to enter the REC mode.

2)If the message Memory Full appears, transfer images to your computer, delete images you no longer need, or use a different memory card.

Images are out of focus.

1)If the lens is dirty, clean it off. 2)You may be moving the camera when shooting. When

shooting, place the camera on a tabletop or some other stable surface, or find some way to fix the camera in place.

144 Appendix

There is digital noise in images.

Sensitivity may have been increased automatically for a dark subject, which increases the chance of digital noise. Use a light or some other means to illuminate the subject.

A recorded image was not saved.

1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows , charge the battery as soon as possible (page 21).

2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete.

Though available lighting is bright, the faces of people in the image are dark.

Not enough light is reaching the subjects. Adjust Brightness to the + side (page 59).

Subjects are too dark when shooting images in a seashore or ski area.

Sunlight reflected by water, sand, or snow, can cause underexposure of images. Adjust Brightness to the + side (page 59).

The image is out of focus during movie recording.

1)Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range.

2)The lens may be dirty. Clean the lens (page 123). 3)Focus is fixed during movie recording, so the image can go

out of focus if there is a big change in the distance between the camera and subject during recording.

Playback

The camera will not enter the PLAY mode.

The PLAY mode cannot be entered while an Interval Shooting operation is in progress.

The color of the playback image is different from what appears on the monitor screen when shooting.

Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens.

Images are not displayed.

This camera cannot display non-DCF images recorded onto a memory card using another digital camera.

Images cannot be rotated.

Snapshot recorded with another camera cannot be rotated. Snapshots recorded with another camera Protected images

Problem Possible Cause and Recommended Action

145 Appendix

File Deletion

A file cannot be deleted.

The file may be protected. A protected image cannot be deleted.

Wireless Connection

I cant establish a wireless connection. The wireless LAN connection is broken.

1)The camera cannot connect with a smartphone if they are too far apart from each other.

2)The smartphone may be connected with another wireless device. Check the smartphones Wi-Fi settings and confirm that the camera is selected for wireless LAN connection (page 84).

3)Connection may have been lost due to interference caused by a nearby microwave oven, cordless phone, or other wireless device. Move the camera away from the device causing the problem.

I forgot my password.

While holding down [0] (Movie) and the shutter button on the camera, hold down [p] (Power) for about six seconds. The cameras operation lamp will go out and then the password will be returned to its initial default setting. Note that initializing the password unpairs the camera and smartphone, so you will need to pair them again. For information about the initial default password settings, see page 83.

Location Information

Location information isnt being added to my images.

1)Pair the camera and smartphone, and then establish a Bluetooth wireless technology connection between them.

2)If you are shooting snapshots, select On for the cameras location information setting (page 91).

3)Configure smartphone settings to acquire location information, and make sure it is where location information can be received.

Problem Possible Cause and Recommended Action

146 Appendix

Bluetooth wireless technology

A connection cannot be established between the camera and controller.

1)The camera cannot connect with the controller if they are too far apart from each other.

2)A Bluetooth connection cannot be established with the camera while it is connected to a smartphone by wireless LAN. Terminate the wireless LAN connection.

3)If the camera is connected to a computer, unplug the USB cable to terminate the connection.

4)If you still cannot establish a connection, perform the steps below to re-pair the camera and controller.

Remove the memory card from the camera.

While holding down the camera shutter button, hold down [p] (Power) for at least one second.

While holding down the controller shutter button, hold down [p] (Power) for at least six seconds.

The operation lamps of the camera and controller will flash orange, and then the pairing operation required for Bluetooth wireless technology connection will start.

Other

The wrong date and time are displayed, or the wrong date and time are being stored along with image data.

The date and time setting is off. Set the correct date and time (page 107).

The messages on the display are in the wrong language.

The wrong display language is selected. Change the display language setting (page 108).

Images cannot be transferred over a USB connection.

1)The USB cable may not be connected securely to the camera. Check all connections.

2)If the camera is not turned on, turn it on. 3)Your computer may not be able to recognize the camera if

you connect via a USB hub. Always connect directly to the computers USB port.

Language selection screen appears when the camera is turned on.

1)You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery. Check the camera setup (pages 30, 107).

2)There may be a problem with the cameras memory data. If this is the case, perform the reset operation to initialize the cameras setup (page 109). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the cameras memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center.

Problem Possible Cause and Recommended Action

147 Appendix

There are various indicators and values on the monitor screen.

The monitor screen shows indicators and other information about shooting conditions and the image you are recording. You can disable display of indicators and values by selecting Off for Info on the Setup menu (page 105).

Buttons are not responsive right after the power has been turned on.

With large capacity memory cards there is a delay after the power has been turned on before the buttons become responsive.

Images are not displayed.

1)The camera is turned off. 2)There is no Bluetooth connection between the camera and

controller (page 28).

Problem Possible Cause and Recommended Action

148 Appendix

Display Messages

Access timed out. Connection dropped.

Appears when a connection could not be established with a smartphone.

Battery is low. This message appears when the camera or controller battery goes dead.

Camera connection was lost. Power will turn off.

A Bluetooth connection between the camera and controller could not be established or maintained (page 145).

Card ERROR

There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 109).

IMPORTANT!

Formatting a memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device.

File could not be saved because battery is low.

Cameras battery power is low, so an image file could not be saved.

Folder cannot be created.

You are trying to record a file while there are already 9999 files stored in the 999th folder. If you want to record more, delete files you no longer need (page 39).

Memory Full Memory is full with images you recorded and/or files saved by editing operations. Delete files you no longer need (page 39).

Overheating. Power will turn off.

The camera protection function may have activated because camera and/or controller temperature is too high. Turn off power and wait until the camera or controller cools down before trying to use it again.

Some problem occurred. Cancelling interval shooting.

Interval Shooting was cancelled due to insufficient memory capacity or because a folder cannot be created. If you want to record more, delete files you no longer need (page 39).

The file could not be created.

A Highlight Photo or Highlight Movie could not be generated because there are not enough applicable images.

There are no files. There are no files in built-in memory or on the memory card.

This file cannot be played.

The file you are trying to access is corrupted or is a type that cannot be displayed by this camera.

149 Appendix

This function cannot be used.

This message will appear part way through an operation when you attempt to use a function that is not allowed in combination with another function.

150 Appendix

Snapshot

Movies

Number of Snapshots/Movie Recording Time

Image Size (Pixels)

Approximate File Size

Built-in Memory*1 Recording Capacity

microSD Memory Card*2

Recording Capacity

12M (4000x3000) 4.13 MB 7 2286

5M (2560x1920) 2.99 MB 14 4283

Image Size / Pixels (Audio)

Approximate Data Rate (Frame Rate)

Maximum File Size

Built-in Memory*1 Recording Capacity

Maximum Recording Time with microSD

Memory Card*2

File Size of 1-minute

Movie

FHD(30p) 1920x1080 (Monaural)

14.2 Megabits/ second

(30 frames/ second)

29 minutes or 4 GB

26 seconds *3

2 hours 14 minutes

106.5 MB

STD 640x480 (Monaural)

3.8 Megabits/ second

(30 frames/ second)

1 minute 41 seconds

8 hours 33 minutes

28.5 MB

HS240 512x384 (No audio)

40.0 Megabits/ second

(240 frames/ second)

9 seconds 48 minutes 300.0 MB

151 Appendix

*1 Built-in memory capacity after formatting (Approx. 49.9MB) *2 When using a 16GB microSDHC memory card (SanDisk Corporation). Number of

image and recording time values depend on the memory card you are using. *3 The data transfer rate of built-in memory is not sufficient for FHD(30p) movies.

Whenever possible use an Ultra High-Speed Type memory card (pages 32, 54).

Snapshot and movie recording capacity values are approximate and intended for reference only. Actual capacity depends on image contents.

File size and data rate values are approximate and intended for reference only. Actual values depend on the type of image being shot.

When using a memory card with a different capacity, calculate the number of images as a percentage of 16GB.

The time it takes to play back a high speed movie will be different from the time it takes to record it. If you record a high speed movie for 10 seconds, for example, it will take 80 seconds to play it back.

152 Appendix

Specifications

File Format Snapshots: JPEG (Exif Ver. 2.3), DCF2.0 compliant

Movies: MOV format, H.264/AVC standard, IMA-ADPCM (monaural)

Recording Media Built-in Memory (Image Storage Area: 49.9MB*) microSD, microSDHC, microSDXC * Built-in memory capacity after formatting

Recorded Image Sizes Snapshots: 12M (4000x3000), 5M (2560x1920)

Movies: FHD(30p) (1920x1080 30 fps), STD (640x480 30 fps), HS240 (512x384 240 fps)

Effective Pixels 10.2 Megapixels

Imaging Element Size: 1/2.3-inch CMOS (backlit) Total Pixels: 12.76 Megapixels

Lens f-number: f/2.8 Focal Length: f= 2.87 mm (equivalent to 16mm in 35mm film format)

Zoom Up to 4.0X when Digital zoom is used

Focusing Contrast Detection Auto Focus Focus Modes:

Auto Focus, Macro Focus, Pan Focus AF Area*: Intelligent, Spot, Multi * The AF Area changes automatically in accordance with the

recording mode.

Approximate Focus Range (Snapshot) (From Lens Surface)

Auto Focus: 10 cm to 9 (3.9" to 9) Macro Focus: 3 cm to 10 cm (1.2" to 3.9") Pan Focus : 55 cm to 9 (21.7" to 9)

Exposure Compensation

2.0 EV to +2.0 EV (in 1/3EV steps)

153 Appendix

White Balance Auto, Daylight, Overcast, Shade, Daywhite Fluorescent, Daylight Fluorescent, Tungsten, Manual WB

Sensitivity (Standard Output Sensitivity)

Snapshots: Auto, ISO 64, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200

Movies: Auto

Communication function (Camera)

Bluetooth: Communication standard:

Bluetooth 2.1+EDR Output class: Class 2 Bluetooth 4.0

Wi-Fi: Standard: IEEE 802.11b/g/n Operation frequency range: 1 to 11ch Encryption: WPA2

Communication (Controller)

Bluetooth: Communication standard:

Bluetooth 2.1+EDR Output class: Class 2

Monitor Screen (Controller)

3.0-inch TFT color LCD 921,600 dots Capacitive type touch panel

External connection terminal (Camera)

Micro USB port (Hi-Speed USB compliance, USB charging/ USB powered operation)

External connection terminal (Controller)

Micro USB port (USB charging/USB powered operation)

Microphones (Camera) Monaural

Speaker (Camera) Monaural

Power Requirements Camera: Built-in rechargeable lithium ion battery Controller: Built-in rechargeable lithium ion battery

154 Appendix

Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23C (73F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.

Temperature: 23C (73F) Battery: NP-150 (Rated Capacity: 950 mAh) Recording Medium: 16GB microSDHC memory card (SanDisk Corporation UHS-I

series)

*1 In accordance with CIPA (Camera and Imaging Products Association) standards *2 In accordance with CASIO standards *3 One-image scroll approximately every 10 seconds

The above values are based a new battery, starting from a full charge. Repeated charging shortens battery life.

The above values are for reference only. They do not guarantee that the specified battery life will be attained under actual operating conditions.

Frequency of High Speed CS usage, configured settings, the amount of time the camera is left turned on, and ambient temperature in the area where the camera is used all greatly affect recording time and number of shots values.

Number of snapshots (Operating Time)

235 shots*1

285 shots*2

(Camera stand-alone operating time)

Actual movie recording time (FHD(30p) movie)*1 55 minutes

Approximate continuous movie recording time (FHD(30p) Movie)*2 1 hour 20 minutes

Approximate continuous movie recording time (High speed movie HS240)*2 1 hour 30 minutes

Continuous Playback (Snapshots)*3 4 hours 10 minutes

Power Consumption Camera: 5 V DC, Approximately 3.6 W Controller: 5 V DC, Approximately 2.6 W

Dimensions Camera: 60.9 (diameter) x 33.3 (D) mm (2.4" (diameter) x 1.3" (D)) (excluding hinge unit)

Controller: 59.2 (W) x 86.7 (H) x 19.4 (D) mm (2.3" (W) x 3.4" (H) x 0.76" (D))

Combined: 60.9 (W) x 154.8 (H) x 38.7 (D) mm (2.4" (W) x 6.1" (H) x 1.5" (D)) (including hinge unit)

Weight Camera: Approximately 76 g (2.7 oz) (including memory card, not including hinge unit)

Controller: Approximately 103 g (3.6 oz) Combined:

Approximately 214 g (7.5 oz) (including hinge unit and memory card)

155 Appendix

. USB-AC adaptor (AD-C53U)

Power cord precautions for use in Singapore The power cord set is not supplied. The power cord used must comply with relevant national and/or international standards.

Input 100 to 240 V AC, 50/60 Hz, 100 mA

Output 5.0 V DC, 650 mA

Operating Temperature Requirements

5 to 35C (41 to 95F)

Dimensions 53 (W) x 21 (H) x 45 (D) mm (2.1" (W) x 0.83" (H) x 1.8" (D)) (excluding projections)

Weight Approximately 37 g (1.3 oz)

156 Appendix

Declaration of Conformity According to EU Directive

Hereby, Casio Europe GmbH, Casio-Platz 1, 22848 Norderstedt, Germany, declares that the radio equipment type Digital Camera Model EX-FR100, EX-FR100CT is in complaiance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://doc.casio.com

CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

To comply with the relevant European RF exposure compliance requirements, this EX-FR100, EX-FR100CT must not be co-located or operating in conjunction with other transmitter.

Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact your customer service representative.

Frequency band and maximum output power EX-FR100 IEEE802.11b/g/n(2.4GHz)14.5dBm Bluetooth(2.4GHz)4dBm Bluetooth LE(2.4GHz)4dBm EX-FR100CT Bluetooth(2.4GHz)4dBm

Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union: Casio Europe GmbH Casio-Platz 1, 22848 Norderstedt, Germany www.casio-europe.com

B

157 Appendix

FCC marking is a standard conformity mark in the United States. GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas).

NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

Caution Exposure to radio frequency radiation This device complies with FCC radiation exposure limits set forth for an uncon- trolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity Model Number: EX-FR100, EX-FR100CT Trade Name: CASIO Responsible party: Industrial Handheld Division Casio America, Inc. Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801, USA Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2017

Manualsnet FAQs

If you want to find out how the Ver.1.00 Casio works, you can view and download the Casio EXFR100 Ver.1.00 Camera User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Casio Ver.1.00 as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Casio Ver.1.00. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio EXFR100 Ver.1.00 Camera User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio EXFR100 Ver.1.00 Camera User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio EXFR100 Ver.1.00 Camera User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio EXFR100 Ver.1.00 Camera User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio EXFR100 Ver.1.00 Camera User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.