Carrier 33CONNECTSTAT43 Quick Start Guide PDF

1 of 2
1 of 2

Summary of Content for Carrier 33CONNECTSTAT43 Quick Start Guide PDF

FREE CONNECT APP AVAILABLE at www.carrier.com/connectstat

Wi-Fi is a registered trademark of Wi-Fi Alliance Corporation.

Android is a registered trademark of Google Inc. / Apple is a regis- tered trademark of Apple Corporation

WIRING DIAGRAMS WIRING DIAGRAMS

99 7-

01 90

30 -2

-R

1 1-

80 8-

72 9-

01 Quick Start Guide

Carrier Connect Wi-Fi Commercial Thermostat

WHATS IN THE BOX

COMPATIBILITY CHECK This Wi-Fi thermostat is designed to work with 24 Vac systems requiring both R and C wires. This includes gas, electric, oil, forced air, variable speed, heat pump and radiant heat. It can be configured for:

Heating: 1-4 stages (Y1, Y2, W1, W2)

Cooling: 1-3 stages (Y1, Y2, Y3)

Dehumidification: cooling only 1-3 stages (Y1, Y2, Y3) or Carriers Humidi-MiZer adaptive dehumidification system 1-2 stages (Y1, Y2, *)

Heat pump: with auxiliary & emergency heat (Y1, Y2, W1, W2, O)

Fan Single Speed (G)

Power (R, C)

Dual fuel systems (heat pump with furnace)

Outdoor Air Temperature (OAT) or Remote Sensor (optional)

Quick Start Guide

Security ScrewAnchors and Screws

Thermostat Thermostat Base

1. TURN POWER OFF Turn off 24 Vac power at the equipment circuit breaker or the system switch. Confirm that power is OFF.

2. INSTALL THERMOSTAT Position the thermostat base against your wall to deter- mine if the new screw locations align with prior positions. If base does not align with existing anchor holes, mark new screw locations with a pencil.

Drywall: Drill 3/16 hole for the anchor Plaster: Drill 7/32 hole for the anchor

Pull wires through opening in base and attach base to the wall using provided screws.

3. CONNECT THE WIRES

Comfort Control for Your Building

Part #: 33CONNECTSTAT43

24 Vac outputs

AC or HPThermostat 2-stage heat 3-stage cool

R

C

G

W1

W2

Y1

Y2

Y3

O

R

C

G

Y1

Y3

Y2

W1

W2

PACKAGED ROOFTOP UNITS

24 Vac outputs

Thermostat 1-stage heat 1-stage cool

R

C

G (room fan)

W1 (heating valve)

Y1 (cooling valve)

Indoor Single-stage heat/cool unit

R

C

G

W1

W2

Y1

Y2

Y3

O

HYDRONIC FAN COIL

DUAL FUEL SYSTEMS

R

C

G

W1

W2

Y1

Y2

24 Vac outputs

R

C

G

Y1

Thermostat 2-stage HP heat 2-stage cool

R

C

G

W1

Y1

O

OutdoorIndoor 2-stage furnace

R

C

G

Y1

2-stage AUX heat 2-stage HP

Y2

W2

Y3

O

Y2 Y2

O O

R

C

G

W1

W2

Y1

Y2

24 Vac outputs

R

C

Y1

Thermostat 2-stage heat 3-stage cool

R

C

G

W1

Y1

OutdoorIndoor 2-stage furnace

R

C

Y1

G

Y2

3-stage AC

G

O

Y3 Y3

W2

FURNACE/AC SYSTEMS

R

C

G

W1

W2

Y1

Y2

24 Vac outputs

Thermostat 1-stage heat 1-stage cool

R

C

G

Y1

AUX heatWSHP

R

C

G

W1

1-stage AUX heat

OO Y3

WATER SOURCE HEAT PUMP

R

C

G

W1

W2

Y1

Y2

24 Vac outputs

R

C

Y1

Thermostat 1-stage heat 3-stage cool

R

C

G

W1

Y1

OutdoorIndoor 2-stage air handler

R

C

Y1

G

W1

Y2

3-stage AC

G

W1

O

Y3 Y3

W2

AIR HANDLER OR DX FAN COIL/AC SPLIT SYSTEM

R

C

G

W1

W2

Y1

Y2

24 Vac outputs

R

C

G

Y1

Thermostat 2-stage HP heat 2-stage cool

2-stage AUX heat

R

C

G

W1

Y1

OutdoorIndoor 2-stage air handler

R

C

G

Y1 W2

W outW1

2-stage HP

Y2Y2 Y2

Y3 O OO O

AIR HANDLER OR DX COIL/HEAT PUMP SPLIT SYSTEM

6. RETURN POWER TO SYSTEM

The thermostat displays the Home screen, as shown below.

From the Home Screen, swipe left or right to navigate through screens. A right swipe or left swipe on any of the SYSTEM SETTINGS sub-screens will return to the SYSTEM SETTINGS screen. You can also press the Home button to return to the Home screen at any time.

Banner

Wi-Fi Signal

System Status

Space Temperature

Page Indicator

7. SYSTEM CONFIGURATION To configure and setup the system, navigate to the MODE screen and verify that the MODE is set to OFF. Go to the FAN screen and press and hold the Fan Button for 5 seconds to get to the SYSTEM SETTINGS screen. The yellow Row Indicator at the right side of the screen indicates the current location in the list of advanced settings options. Swipe up or down to navigate through the options. Tap the desired field to enter that screen.

8. SETTINGS SCREEN Navigate from the HOME screen to the SETTINGS screen to change and/or view options in the thermostat. The yel- low Row Indicator scrolls up and down through additional rows of settings. When you press one of the displayed icons, the appropriate screen appears.

9. USER APP The ConnectTM App* is available for Apple iOS at App Store or at Google Play for Android devices. Search for Carrier Connect Thermostat.

Additional installation and operating instructions are available by scanning the QR code shown.*

* NOTE Downloading the App provides enhanced access to your device. Device compatibility requires: Apple iOS 7.0 or later or Android 4.2 or later.

After downloading Connect App, select USER SETUP and Register New Account.

When registering, enter an email address that you can access on your mobile device, so you can receive the confirmation email to complete registration process. Select SETUP NEW THERMOSTAT and follow the Connect App instructions to setup new thermostat.

After successfully registering the thermostat, enter the servicing contractors name and phone number on the SERVICE INFO screen.

3. CONNECT THE WIRES

Straighten the wires out and match your wire configura- tion to the terminals on the base. Connect each wire individually by pushing down on the quick connect tab, inserting the wire into the connector opening, and then releasing the tab.

4. CONNECT BACNET MS/TP Connect communication wiring to terminals A+ and B-. Maintain polarity and do not terminate shield at the thermostat.

For more details, see the Carrier Connect Wi-Fi Thermostat 33CONNECTSTAT43 Installation Guide.

5. ATTACH THERMOSTAT FACE

Align the thermostat face using hinge guide on top. Rotate the thermostat down until tab aligns with hole in base. Install security screw if necessary.

On the THERMOSTATS screen, select the thermostat from the list.

The

Home screen is now displayed.

10. WEB PORTAL To access the Connect thermostat with any device connected to the WEB, visit connectst

Manualsnet FAQs

If you want to find out how the 33CONNECTSTAT43 Carrier works, you can view and download the Carrier 33CONNECTSTAT43 Quick Start Guide on the Manualsnet website.

Yes, we have the Quick Start Guide for Carrier 33CONNECTSTAT43 as well as other Carrier manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Start Guide should include all the details that are needed to use a Carrier 33CONNECTSTAT43. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Carrier 33CONNECTSTAT43 Quick Start Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Carrier 33CONNECTSTAT43 Quick Start Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Carrier 33CONNECTSTAT43 Quick Start Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Carrier 33CONNECTSTAT43 Quick Start Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Carrier 33CONNECTSTAT43 Quick Start Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.