- Manuals
- Brands
- Carrier
- Software
- KSAIF0201AAA
- Owner's Manual
Carrier KSAIF0201AAA Owner's Manual PDF
Summary of Content for Carrier KSAIF0201AAA Owner's Manual PDF
KSAIF0101AAA, KSAIF0201AAA, KSAIF0301AAA, KSAIF0401AAA, KSAIF0501AAA, KSAIF0601AAA
Wi-Fi Interface Kit for Smart Phone Control for Ductless Systems
Table of Contents
SAFETY CONSIDERATIONS..................................................... 2 OVERVIEW .................................................................................. 4 WIRELESS NETWORK TYPE.................................................... 4 DOWNLOAD AND INSTALL APP ............................................ 5 USER REGISTRATION ............................................................... 6 MULTIPLE SMART PHONE DEVICE CONTROL ................... 7 CONFIGURATION PROCESS .................................................... 7 HOW TO USE THE APP ............................................................ 11 MAIN CONTROL INTERFACE................................................ 12 MODES........................................................................................ 13 FAN COIL DELETION FROM APP.......................................... 18 GROUP CONTROL (SINGLE ZONE)....................................... 19 GROUP CONTROL (MULTI -ZONE)....................................... 21 CAUTIONS ................................................................................. 22 TROUBLESHOOTING............................................................... 23
Owners Manual
Page 2
SAFETY CONSIDERATIONS
Installing, starting up, and servicing air-conditioning equipment can be hazardous due to system pressures, electrical components, and equipment location (roofs, elevated structures, etc.). Only trained, qualified installers and service mechanics should install, start-up, and service this equipment. Untrained personnel can perform basic maintenance functions such as cleaning coils.
When working on the equipment, observe precautions in the literature and on tags, stickers, and labels attached to the equipment.
Follow all safety codes.
Wear safety glasses and work gloves. Keep a quenching cloth and fire extinguisher nearby when brazing. Use care in handling, rigging, and setting bulky equipment.
Read these instructions thoroughly and follow all warnings or cautions included in the literature and attached to the unit. Consult the local building codes and National Electrical Code (NEC) for special requirements. Recognize safety information.
This is the safety-alert symbol . When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words: DANGER, WARNING, and CAUTION.
These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.
NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.
Page 3
ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death. Before installing, modifying, or servicing system, main electrical disconnect switch must be in the OFF position. There may be more than 1 disconnect switch. Lock out and tag switch with a suitable warning
WARNING
EXPLOSION HAZARD Failure to follow this warning could result in death, serious personal injury, and/or property damage. Never use air or gases containing oxygen for leak testing or operating refrigerant compressors. Pressurized mixtures of air or gases containing oxygen can lead to an explosion.
WARNING
EQUIPMENT DAMAGE HAZARD Failure to follow this caution may result in equipment damage or improper operation.
WARNING
Page 4
OVERVIEW For the utilization of the hardware provided in the Wi-Fi kits (KSAIF0101AAA, KSAIF0201AAA, KSAIF0301AAA, KSAIF0401AAA, KSAIF0501AAA, and KSAIF0601AAA), the homeowner/end user needs to download the mobile app.
Applicable Systems: iOS, ANDROID
IMPORTANT: It is recommended to use iOS 7.0, Android 4.0 or later.
NOTE:
APP supports the latest software versions of the Android and iOS systems.
Due to special situations that may occur, the manufacturer explicitly claims:
Not all Android and iOS systems are compatible with the app. The manufacturer does not bear any responsibility for any issue that may result due to incompatibility.
WIRELESS NETWORK TYPE The Wi-Fi kits are only supported by WPA-PSK/WPA2-PSK encryption and no encryption. WPA-PSK/WPA2-PSK encryption is recommended.
NOTE: Manufacturer will not be liable for any issues and problems caused by the Internet, Wi-Fi Router and smart devices. Please contact the original provider for additional support.
Check the router website for more information. Due to different network configurations, the control process may occasionally return a time-out. If this situation occurs, attempt to use the app or function inside the app again.
NOTE: Try using the app or function within the app 2-3 times before reconfiguring the app. If unsuccessful, reconfiguring the app may be necessary. Additionally, it may be necessary to configure the network again. If the time-out error continues, reinstall the APP and check your network connection. See TROUBLESHOOTING on page 23 for more support. If this situation occurs, the display between the board and app may differ.
CAUTION
Page 5
DOWNLOAD AND INSTALL APP Android Users: Go to Google PlayTM, search for the Carrier CliMate, Bryant ControlBox, Payne Panel, or Midea Air app depending on the type of equipment installed and download it. iPhone Users: Go to the App Store TM, search for the Carrier CliMate, Bryant ControlBox, Payne Panel, or Midea Air app and download it.
NETWORK CONFIGURATION
Important: During the network configuration process (AP mode), the air conditioning remote controller is unable to control the system. It is necessary to finish network configuration, cycle power, or wait eight (8) minutes for the system to time out to regain control.
Prior to starting the network configuration process, verify your Android or iOS device is connected to the Wi-Fi network you want to configure. Ensure the Android or iOS device Wi-Fi function is turned on and auto-connects to your Wi-Fi network.
CAUTION
Page 6
USER REGISTRATION Create an Account
1. Tap Create Account on the first screen when the app is launched for the first time (Fig. 1).
Fig. 1 Registration
NOTE: Fig. 1 illustrates the generic app interface. The interface may vary depending upon the selected app.
2. Enter your Email and create a Password (Fig. 2).
3. Read and agree to the Terms of Service.
Fig. 2 Tap Registration
4. Tap Registration.
4
2
3
Page 7
MULTIPLE SMART PHONE DEVICE CONTROL
The app can run on multiple devices in a household. Simply download the app to other devices and sign in to the SAME account using the user name and password used to setup the system.
NOTE: Setting up the system again in a different smart phone device with a different user name will remove the unit from the first smart phone device.
CONFIGURATION PROCESS
1. Ensure your mobile device has already been connected to the Wi-Fi network you choose. It is recommended to select FORGET ALL NETWORKS except the one used to connect the fan coil to prevent configuration errors.
2. Disconnect the power supply from the Ductless system and wait thirty (30) seconds.
3. Reconnect the power supply to the Ductless system.
4. Open the app on your smart phone and log in using the previously configured email and password.
5. Select Add Device.
Fig. 3 Add Device
Page 8
6. On the screens menu, select Split-type AC and follow the steps on the screen.
Use this method to eliminate the need to scan the QR code to complete the configuration.
Fig. 4 Select AC as the Method
7. Use the Wireless Remote Controller to press LED or DO NOT DISTURB 7 times within 3 minutes. When the display shows AP, the Ductless system is ready for network configuration. Once the indoor unit displays AP or the indoor unit beeps, tap Next.
NOTE: The ducted, cassette, and floor console displays does NOT display AP during the network configuration.
Fig. 5 Split-type AC
67
Page 9
8. On the mobile device go to Settings > Wi-Fi, and ensure Wi-Fi is turned on. Tap the name of the secure Wi-Fi network (net_ac_XXXX). Enter the password 12345678 then tap Join. Go back to the app and tap Next.
Fig. 6 Select net_ac_XXXX
9. Select the desired home Wi-Fi name and enter the Wi-Fi password. Press Start Configuration.
Fig. 7 Select the Wi-Fi network
The system begins to configure based on the users input. Once the connection is complete, a screen appears which allows the user to select the units name or to customize it.
8
9
Page 10
Fig. 8 Configuration
Fig. 9 Select Device Name
NOTE: The app may take up to 3 minutes to configure the Wi-Fi kit for connectivity to your Wi-Fi network.
NOTES: When the network configuration is complete, the app confirms
whether the connection was successful or not. Due to different LAN configurations, it is possible that the device
status will display OFFLINE. If this occurs, refresh the device list by pulling down on the list shown on the app home screen or the ductless system power can by cycled and the device status changes to ONLINE after a few minutes.
Page 11
HOW TO USE THE APP
Basic Functions IMPORTANT: Prior to using the app, verify your mobile device and ductless system are connected to the Internet.
1. Log into the app using the previously configured email and password (see USER REGISTRATION on page 6).
Fig. 10 Log into the app
2. Select the desired device previously configured to enter the main control interface. To add a new device, tap + Add Device and follow the instructions.
Fig. 11 Select the system
Page 12
MAIN CONTROL INTERFACE
3. From the Main Control Interface the user can control the ductless systems ON/ OFF status, operation mode, temperature, fan speed, and other functions by touching the buttons at the bottom of the screen.
NOTE: Feature availability depends on the indoor unit type.
Fig. 12 Main Control Interface
Fig. 13 Main Control Interface
Fig. 14 Main Control Interface
Current Room Temperature Set Point, and Mode
ON/OFF MODE FAN SPEED
SETTING TURBO
SWING SWING F/C
F/C
Page 13
MODES There are five (5) different modes available within the app: AUTO, COOL, DRY, HEAT, and FAN. When the user taps MODE, the Mode menu appears at the bottom. Once the mode changes, the screens color changes depending on which mode is operational at the time.
Fig. 15 Modes
Fig. 16 Modes
AUTO COOL
DRY HEAT FAN
Page 14
Important: When using the app to control the space setpoint and mode, the wireless or wired controller (where applicable) may not update with the settings from the app. Also, if the wireless or wired controller (where applicable) is used to control the setpoint and mode, the app will not update with the setting from the controller. The indoor unit responds to the last command from either the app or the controller.
AUTO
AUTO mode allows the ductless system to shift between the HEATING and COOL modes to maintain the setpoint. The dead band between setpoint and controllability is 2F(1C) and cannot be adjusted within the app. When this mode is selected, the screen color changes.
COOL
COOL mode allows the ductless system to lock into the COOL mode ONLY and condition the space by cooling the air to the setpoint. If the space temperature is lower than the setpoint, the ductless system turns off. When this mode is selected, the screen color changes.
DRY
DRY mode locks the ductless system into the COOL mode and reduces airflow to increase the water removal from the space. Conditioning of the space is done by cooling the air to the setpoint. If the space temperature is lower than the setpoint, the ductless system turns off. When this mode is selected, the screen color changes.
HEAT
HEAT mode allows the ductless system to lock into the HEAT mode ONLY and condition the space by heating the air to the setpoint. If the space temperature is higher than the setpoint, the ductless system turns off. When this mode is selected, the screen color changes.
FAN
FAN mode allows the ductless system to turn off except for the indoor fan. FAN mode is intended to circulate air through the space without conditioning it with the refrigeration system. When this mode is selected, the screen color changes.
Page 15
Temperature Set Point
Once the operation mode is selected, setting the desired indoor temperature set point is usually desired. To do this, use the dial around the temperature setting number on the main screen.
Fan Speed Settings
There are 4 fan speed options available to the user: AUTO, HIGH, MID, and LOW.
NOTE: These speeds are available only when the system is set to the COOL or HEAT modes. Changing fan speeds is not available in the AUTO or DRY modes.
The adjustments to the fan speed should be done to improve the comfort of the occupant(s).
Turbo
TURBO is only available after the COOL mode is selected. TURBO is designed to decrease the time it takes for the space to achieve setpoint by triggering the compressor and fan to immediately move to a higher speed.
Louver Controls
The app provides 2 different louver controls, horizontal and vertical control. The use of these functions are dependent on the type of fan coil currently installed and if it has a vertical and/or horizontal louver control. When available, these buttons allow the user to adjust the direction of air flow from the motorized veins.
ECO Mode
ECO mode is available only after the ductless system is set to the COOL mode. This mode reduces the energy consumption of the ductless system up to 60% by slowing the compressor and reducing the maximum capacity output. This mode remains active for 8 hrs and then the system returns to the normal operating mode.
NOTE: While in this mode, the system may not obtain the setpoint if there is a large thermal load on the space.
Unit of Measure
By default, the app is configured in Celsius for the temperature unit of measure. Tap the F/C button to change to Fahrenheit. If pressed again, the unit of measure returns to Celsius.
Page 16
Scheduling 7 day programmable features are available to set on and off times for the system to condition the space allowing customized time, days, modes and temperatures of operation.
Fig. 17 Scheduling
46F (8C) Heating Setback/ Vacation Mode Feature allows the system to enter a setback/vacation mode when the space is or will be unoccupied. The system follows a space temperature setpoint of 46F (8C) to protect the space from freezing temperatures. Sleep SLEEP allows the user to customize the space temperatures throughout a sleep cycle of 8 hrs by setting a targeted temperature for each hour of the cycle. Adjust the temperature by dragging each round node to the desired temperature.
Important: This mode must POWER ON when it is desired to start the sleep cycle.
Fig. 18 Function
Fig. 19 Sleep NOTE: Start time scheduling for the sleep cycle is currently not available.
Page 17
System Check A systems health check can be performed in the check screen. The SYSTEM CHECK function informs the user or service technician of normal items, abnormal items, and detailed information about the operating characteristics of the ductless system while operating.
Fig. 20 System Check
Fig. 21 System Check
Page 18
FAN COIL DELETION FROM APP In the event a fan coil is decommissioned or a user moves from a location where a Wi-Fi kit is installed, the ductless system can be removed from the app by simply swiping to the left (see Fig. 22). Alternatively, by entering the Information menu via the function menu, accessible from the icon in the top right of the home screen (see Fig. 23).
Fig. 22 Fan Coil Deletion from App
Fig. 23 Fan Coil Deletion from App
Page 19
GROUP CONTROL (SINGLE ZONE) The systems can be grouped together to operate at the same time with the same set point fan speeds and modes.
To group the systems:
1. Under Setting click Group Information.
Fig. 24 Setting 2. Click Create Single Zone
Group.
Fig. 25 Group Information
3. Select the units to group and tap Confirm.
Fig. 26 Confirm Single Zone Group
1
3
Page 20
4. Name the group. Press OK.
Fig. 27 Please Name the Group
The Group Information screen shows the number of zones grouped.
Fig. 28 Group Information
The HOME screen appears with the new group listed.
Fig. 29 Home
5. Use the Group Control screen to control the new group. See Fig. 30 on page 21.
4
Page 21
GROUP CONTROL (MULTI -ZONE) Each one of the indoor units on a multi-zone system can be grouped together to operate with the exact same set point, fan speeds and modes as well as select priorities.
Fig. 30 Group Control Heating Priority: If any unit in the system is set to the HEATING mode, the system priority switches to HEAT. If any unit is set in COOLING, while any unit in the system is operating as HEATING, the units set to COOLING enter the STANDBY mode, which turns off the indoor unit until all the indoor units are in the same mode. Cooling Priority: If any unit in the system is set to the COOLING mode the system priority switches to COOLING. If any unit is setup in HEATING, while any unit in the system is operating as COOLING, the units set to HEATING enter STANDBY mode, which turns off the indoor unit until all indoor units are in the same mode. MASTER Priority: The unit set as master leads the priority that operates at the moment and communicates to the other units if it is approaching an error. Refer to the Cooling and Heating Priorities for details.
Page 22
CAUTIONS The Wi-Fi kit complies with 47cfr sub-part 15 and RSS 210 of the Industry and Science of Canada. Operation is subject to the following conditions:
1. This device may not cause a harmful interface, and 2. this device must not accept any interference received, including
interference that may cause undesired operation. Only operate the device in accordance with the instructions
provided. The Wi-Fi kit complies with FCC and IC electromagnetic radiation limits set forth for a residential environment. To avoid the possibility of exceeding the FCC and/ or IC radio electromagnetic radiation limits, human proximity to the antenna shall not be less than 8 inches (20cm) during normal operation.
Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.
Page 23
TROUBLESHOOTING
Table 1 Troubleshooting
ISSUE RESOLUTION
Connec- tion failure between the Wi-Fi AC and home router
Wrong password inputted: If there is no response for a long time, disconnect from the AP mode then reconnect to the AP mode and repeat the network setup process.
Password contains special characters: The Wi-Fi app only supports letters and numbers. The app does not support *, @, /.
Unsupported Encryption: Check the router encryption to verify only WAP-PSK or WAP2-PSK or no encryption is used.
Wi-Fi network requires a login to access: Some Wi-Fi networks in public places or businesses require a user name and password to access the Internet. The Wi-Fi kit does not support this type of access.
The router is set to filter MAC addresses: In this case, the router forbids all connected devices except those listed in the router filter list. To resolve this, the Wi-Fi kit MAC address should be added to the accepted MAC list in the router settings or change the router configuration to abstain from filtering MAC addresses.
Too many clients are connected to the router: The average household router cannot support more than 8 sub-routers connected to the main router via a wireless connection. In this case, reduce the number of sub-routers or add routers via a network cable instead of wireless.
Connec- tion failure between router and cloud server
Use a computer or smart phone Internet browser to navigate to https://app.v1.appsmb.com:8443/V2/Login.ashx. If you see the following message, your connection is good:
System removed from the app when other user adds the system
The app can run on multiple devices in a household. Sign in to the SAME account using the user name and password used to setup the system. NOTE: Setting up the system again on a different smart phone device with a different user name removes the unit from the first smart phone device.
Copyright 2019 CAC/BDP 3300 Riverwood Parkway Atlanta GA, 30339 Edition Date: 10/19 Catalog No. OG-KSAIF-03 Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Related manuals for Carrier KSAIF0201AAA Owner's Manual
Manualsnet FAQs
If you want to find out how the KSAIF0201AAA Carrier works, you can view and download the Carrier KSAIF0201AAA Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Carrier KSAIF0201AAA as well as other Carrier manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Carrier KSAIF0201AAA. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Carrier KSAIF0201AAA Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Carrier KSAIF0201AAA Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Carrier KSAIF0201AAA Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Carrier KSAIF0201AAA Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Carrier KSAIF0201AAA Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.