Carrier Toshiba RBC-AMS51E-ES Owner's Manual PDF

1 of 41
1 of 41

Summary of Content for Carrier Toshiba RBC-AMS51E-ES Owner's Manual PDF

Manual do Proprietrio 201 Portugus

Handleiding 161 Nederlands

Manual del propietario 121 Espaol

Bedienungsanleitung 81 Deutsch

Manuel du propritaire 41 Franais

Owners Manual 1 English

Lite-Vision plus Remote Controller

Model name:

RBC-AMS51E-ES

Read this manual before using the RBC- AMS51E-ES remote controller.

Refer to the Installation Manual supplied with the indoor unit for any installation instructions other than operations of the remote controller.

Owners Manual

+00EH97062201_00EN.book Page 1 Saturday, March 12, 2011 8:42 AM

1

Lite-Vision plus Remote Controller Owners Manual

Contents 1 Precautions for Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Running operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Changing the fan mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Changing the temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Monitor screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Menu operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5 Menu items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.Wind Direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.Individual louver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.Louver setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.Off reminder timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.Schedule timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6.Night operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.Filter sign reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 8.Auto grille. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 9.Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 10.Initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 11.Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 12.Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

+00EH97062201_00EN.book Page 1 Saturday, March 12, 2011 8:42 AM

2

Lite-Vision plus Remote Controller Owners Manual

EN

1 Precautions for Safety Read these Precautions for Safety carefully before using. The precautions described below include important items regarding safety. Observe them without fail.

Understand the following details (indications and symbols) before reading the body text, and follow the instructions.

Keep this Manual at accessible place for future reference.

WARNING

Installation Do not attempt to install the air conditioner yourself.

Ask your dealer or a contractor with specialized experience to install the air conditioner. Electric shocks and / or a fire may result if you attempt to install the air conditioner yourself and the air conditioner ends up not being installed perfectly.

Use only with the authorized air conditioner units. Be absolutely sure to use only the authorized air conditioner units designated by the manufacturer. Also, ask a contractor with specialized experience to install them. Electric shocks and / or a fire may result if you attempt to install the parts yourself and the parts end up not being installed perfectly.

Operation Do not operate the buttons with wet hands.

Failure to heed this warning may result in electric shocks and / or trouble. Do not get the control unit wet.

Take steps to avoid getting the control unit wet. Failure to heed this warning may result in electric shocks, a fire and / or trouble.

If trouble (such as the smell of burning) has occurred, stop operation and turn off the main power switch. Allowing operation to continue while the trouble has not been remedied may cause electric shocks, a fire and / or trouble. Consult your dealer.

Relocation Do not undertake any repair work yourself.

Under no circumstances must you attempt to do any repair work yourself. Instead, consult your dealer or a contractor with specialized experience. Electric shocks and / or a fire may result if you attempt to do repair work yourself and this work ends up not being carried out perfectly.

Consult your dealer when the control unit is to be relocated and re-installed.

Indication Meaning of Indication

WARNING Text set off in this manner indicates that failure to adhere to the directions in the warning could result in serious bodily harm (*1) or loss of life if the product is handled improperly.

CAUTION Text set off in this manner indicates that failure to adhere to the directions in the caution could result in serious bodily injury (*2) or damage (*3) to property if the product is handled improperly.

*1: Serious bodily harm indicates loss of eyesight, injury, burns, electric shock, bone fracture, poisoning, and other injuries which leave aftereffect and require hospitalization or long-term treatment as an outpatient.

*2: Bodily injury indicates injury, burns, electric shock, and other injuries which do not require hospitalization or long- term treatment as an outpatient.

*3: Damage to property indicates damage extending to buildings, household effects, domestic livestock, and pets.

+00EH97062201_00EN.book Page 2 Saturday, March 12, 2011 8:42 AM

3

Lite-Vision plus Remote Controller Owners Manual

CAUTION Installation Do not install the remote controller unit where there are high levels of moisture, oils, grease or vibration.

Failure to heed this caution may cause trouble. Do not install the remote controller unit direct sunlight or near a heat source.

Failure to heed this caution may cause malfunctioning. Do not install the remote controller unit where there are sources of electro-magnetic noise.

Failure to heed this caution may cause unintended operation. Operation Do not drop the product or subject it to strong impact.

Failure to heed this caution may cause malfunctioning.

2 Before Use Operate the remote controller according to the following procedure when it is used for the first time or when the settings are changed. Pushing the [ ON/OFF] button starts running the air conditioning unit with the settings made on the remote controller from the next time.

Preparation Turn on the circuit breaker. Setting appears on the display of the remote controller when the power is turned on.

* When the power is turned on, it takes about 1 minute before the remote controller becomes operable. This is not a malfunction.

NOTE Do not turn off the circuit breaker during the season using the air conditioning unit. Turn on the circuit breaker 12 hours or more before starting running the air conditioning unit when the unit has not

been used for an extended period of time.

+00EH97062201_00EN.book Page 3 Saturday, March 12, 2011 8:42 AM

4

Lite-Vision plus Remote Controller Owners Manual

EN

3 Part Names and Functions

Switching between the normal display and detailed display Push and hold the [ CANCEL] button and [ MONITOR] button at the same time for more than 4 seconds to switch the display mode. The normal display mode is selected as a factory default setting. Normal display mode (factory default)

1 [ ON/OFF] button (page 6)

2 [ ] button During normal operation: adjusts the temperature. On the menu screen: selects a menu item. (page 6)

3 [ ] button During normal operation: adjusts the temperature. On the menu screen: selects a menu item. (page 6)

4 [ MENU] button Displays the menu screen. (page 8)

5 [ F1] button Varies its function according to the setting screen. (page 6)

6 [ F2] button Varies its function according to the setting screen. (page 6)

7 [ CANCEL] button Functions as indicated on the screen, such as returning to the previous menu screen. (page 8)

8 [ MONITOR] button Displays the monitoring screen. (page 7)

8 4 7

6

1

2,3

5

24 Room A 12:00

Mode Fan Speed Cool

Temperature sensor

The button LED lights while the air conditioning unit is running.

Model name label

+00EH97062201_00EN.book Page 4 Saturday, March 12, 2011 8:42 AM

5

Lite-Vision plus Remote Controller Owners Manual

Detailed display mode

Icon list *1 Refer to the Installation / Operation Manual supplied with the remote controller.

Ventilation icon list Ventilation icons appear on the display only when a ventilation unit is connected. Refer to the Owners Manual supplied with the Air to Air Heat Exchanger for details about the ventilation icons.

Shows the Energy saving operation is activated. (page 26)

Shows a timer function is activated. (page 17, 19)

Shows the remote controller sensor is activated. (*1)

Shows the Louver lock is activated. (page 16)

Shows the Night operation is activated. (page 23)

Shows the setting of the louver. (page 11, 12)

Shows the central control device prohibits the use of the remote controller (*1)

Shows the filter needs to be cleaned. (page 24, 39)

Automatic mode 24-hour ventilation mode

Bypass mode Nighttime heat purge mode

Total heat exchange mode

24 Room A 12:00

Mode Fan Speed Cool

Icons appear on the screen when the detailed display mode is selected.

!

+00EH97062201_00EN.book Page 5 Saturday, March 12, 2011 8:42 AM

6

Lite-Vision plus Remote Controller Owners Manual

EN

4 Operation

Running operation * Some operation modes are not available depending on the type of indoor unit.

Changing the fan mode * The available fan modes vary depending on the indoor unit connected.

Changing the temperature

1 Push the [ ON/OFF] button to start running.

2 Push the Mode [ F1] button to select the operation mode.

The operation mode changes as follows each time the button is pushed.

3 Push the [ ON/OFF] button to stop running.

1 Push the Fan speed [ F2] button to select the fan mode.

The fan mode changes as follows each time the button is pushed.

appears on the display when the connected indoor unit is not equipped with the fan mode. is not available when Fan is selected as the operation mode.

1 Push the [ ] / [ ] button to adjust the temperature.

Push the [ ] button to raise the temperature setting, push the [ ] button to lower it.

Refer to Set temp range limit for the temperature range available. (page 29)

The temperature cannot be adjusted when Fan is selected as the operation mode.

24 Room A 12:00

Mode Fan Speed Cool

Mode

Auto Heat Dry Cool Fan

Fan speed

Auto High LowMed

+00EH97062201_00EN.book Page 6 Saturday, March 12, 2011 8:42 AM

7

Lite-Vision plus Remote Controller Owners Manual

Monitor screen Check the current usage status.

NOTE Total running hour The operating time is recorded on the remote controller. The time is not recorded during self clean operation or fan operation. Temperature around the outdoor unit Displays the temperature around the vent of the outdoor unit. The displayed temperature may differ from the actual outdoor temperature. Others The Header status appears during group connection.

Activating the key lock function

1 Push [ MONITOR] button. The monitor screen appears.

2 Push [ CANCEL] button to return.

(1) Displays the set temperature. (2) Displays the temperature measured by the indoor

temperature sensor of the indoor unit. If the sensor is set to that of the remote controller, the temperature measured by the remote controller sensor is displayed.

(3) Displays the temperature around the vent of the outdoor unit.

(4) Displays the remaining time until the filter sign lights up.

(5) Displays the accumulated operating time.

Push and hold the [ CANCEL] button for more than 4 seconds to activate the key lock function. Push and hold the [ CANCEL] button for more than 4 seconds again to release the key lock.

appears on the screen when the button set to be locked is pushed while the key lock function is activated.

Select the buttons to be locked from Key lock in 10. Initial setting" on the menu screen. (page 33)

24 Room A 12:00

Mode Fan Speed Cool

Set temp. 27C 27C 35C 2500

60000

Indoor temp. Outdoor temp. Filter remaining hour Total running hour

Monitor

Return

(1) (2) (3) (4) (5)

Room A 12:00

Mode Fan Speed

+00EH97062201_00EN.book Page 7 Saturday, March 12, 2011 8:42 AM

8

Lite-Vision plus Remote Controller Owners Manual

EN

Self clean operation (only for models equipped with the function)

Menu operation * Refer to the next pages for details about the menu screen.

The self clean operation is the function to dry inside the air conditioner after the Auto (cooling), Cool, or Dry operation so that the inside of air conditioner is kept clean.

The self clean operation time differs depending on the time of the Auto (cooling), Cool, or Dry operation.

Push the [ ON/OFF] button twice to stop the self clean operation forcibly.

Self clean appears on the screen while the self clean operation is in progress. The LED of the [ ON/OFF] button turns off.

Refer also to the Owners Manual supplied with the indoor unit about the self clean operation.

1 Push the [ MENU] button.

2 Push the [ ] / [ ] button to select an item.

The selected item is highlighted.

3 Push the Set [ F2] button. The setting screen appears.

4 (To undo) Push the [ CANCEL] button to return.

The screen returns to the previous screen.

Room A 12:00

Time of the Auto (cooling), Cool, or Dry operation

self clean operation time

Less than 10 minutes The self clean operation is not performed.

Between 10 minutes and 1 hour 1 hour

1 hour or more 2 hours

Set Return

Menu(1/3)

1.Wind direction 2.Individual louver 3.Louver setting 4.Off reminder timer 5.Schedule timer

* The menu screen returns to the normal / detailed display if no operation is performed for 60 seconds.

Set

+00EH97062201_00EN.book Page 8 Saturday, March 12, 2011 8:42 AM

9

Lite-Vision plus Remote Controller Owners Manual

5 Menu items

MENU

1. Wind direction

2.Individual louver

3.Louver setting

Swing type

Louver lock

4.Off reminder timer

Off reminder timer

Timer setting

5.Schedule timer

Schedule timer

Condition setting

Holiday setting

6.Night operation

7.Filter sign reset

8.Auto grille

9.Energy saving

Energy saving operation

Set temp range limit

Return back

+00EH97062201_00EN.book Page 9 Saturday, March 12, 2011 8:42 AM

10

Lite-Vision plus Remote Controller Owners Manual

EN

About symbols in this manual The meanings of symbols used in this manual are as follows:

Running Indicates the operation is available only while the air conditioner is running.

10. Initial setting

Clock

Name of room

Screen contrast

Back light

Key lock

Header/Follower

Language

11. Ventilation

ON/OFF

Fan speed

Mode

12.Information

Model information

Service information

Press & hold 4sec.

24H ventilation off

+00EH97062201_00EN.book Page 10 Saturday, March 12, 2011 8:42 AM

11

Lite-Vision plus Remote Controller Owners Manual

1. Wind Direction

Wind direction * Set the wind direction.

CAUTION Refer to the instructions (for the wind direction adjustment) in the Owners Manual supplied with the indoor unit before setting.

Before setting

Turning on/off the louver swing To swing the louver (the display while the louver swing is on)

1 Push the [ ] / [ ] button to select 1. Wind direction on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the wind direction.

3 Push the [ CANCEL] button to return. The screen returns to the menu screen.

1 Push the Swing ON [ F2] button on the Wind direction screen.

Pushing the [ ] / [ ] button on the Wind direction screen while the louver swing is on stops swinging and sets the wind direction to (1).

2 Push the [ CANCEL] button. The screen returns to the menu screen.

Return

Wind direction

Swing ON Louver

Set

(1) (2) (3) (4) (5)

Operation mode Available directions

HEAT, FAN, AUTO (heating) (1) (2) (3) (4) (5)

COOL, DRY, AUTO (cooling) (1) (2) (3)

Wind direction

Return Swing OFF

Louver

Swing ON

+00EH97062201_00EN.book Page 11 Saturday, March 12, 2011 8:42 AM

12

Lite-Vision plus Remote Controller Owners Manual

EN

To stop the louver swing (the display when the louver swing is stopped)

1 Push the Swing OFF [ F2] button on the Wind direction screen.

Push the Swing OFF [ F2] button to stop swinging. The louver stops in the position where the button is pushed.

The louver does not stop in the position (4) or (5) when the operation mode is Cool or Dry. The louver stops in the position (3) even if the button is pushed when the louver is in the position (4) or (5)

Pushing [ ] / [ ] while the display when the louver swing is stopped appears on the screen sets the louver in the position (1).

2 Push the [ CANCEL] button. The screen returns to the menu screen.

NOTE No function appears on the display for the models not equipped with the wind direction setting. Refer to Information Group control. (page 38) appears on the display when the Louver lock function is used. (page 16)

Wind direction

Return Swing ON

Louver

Swing OFF

Swing OFF

FAN, HEAT COOL, DRY

Display when the louver swing is stopped

+00EH97062201_00EN.book Page 12 Saturday, March 12, 2011 8:42 AM

13

Lite-Vision plus Remote Controller Owners Manual

2. Individual louver

Individual louver * For 4-way cassette types, the wind direction and swing operation of each louver can be set individually.

1 Push the [ ] / [ ] button to select 2.Individual louver on the menu screen, push the Set [ F2] button.

2 Push the Louver No. [ F1] button to select the louver to set.

The display changes as follows each time the button is pushed.

3 Push the [ ] / [ ] button to select the wind direction.

Refer to Wind direction about how to set the wind direction. (page 11)

4 Push the [ CANCEL] button. The screen returns to the menu screen.

Individual louver

Return Swing ONLouver No.

Louver

24

3

1

Set

Louver No.

Louver 1 Louver 2 Louver 3 Louver 4 All

Electrical control box

Refrigerant pipe

Drain pipe

+00EH97062201_00EN.book Page 13 Saturday, March 12, 2011 8:42 AM

14

Lite-Vision plus Remote Controller Owners Manual

EN

Turning on/off the louver swing To swing the louver (the display while the louver swing is on)

To stop the louver swing (the display after the louver swing is stopped)

1 Push the Swing ON [ F2] button on the 2.Individual louver screen.

2 Push the [ CANCEL] button. The screen returns to the menu screen.

1 Push the Swing OFF [ F2] button on the 2.Individual louver screen.

2 Push the [ CANCEL] button. The screen returns to the menu screen.

NOTE No function appears on the display for the models not equipped with the individual louver setting. Pushing [ ] / [ ] while the louver is swinging stops swinging and sets the louver in the position (1). Refer to Information Group control. (page 38) appears on the display when the Louver lock function is used. Individual louver setting is not available for the

louver set to be locked. (page 16)

Individual louver

Return Swing OFFLouver No.

Louver

24

3

1

Swing ON

Individual louver

Return Swing ONLouver No.

Louver

24

3

1

Swing OFF

+00EH97062201_00EN.book Page 14 Saturday, March 12, 2011 8:42 AM

15

Lite-Vision plus Remote Controller Owners Manual

3. Louver setting

Swing type * Select the louver swing type from the standard swing, dual swing or cyclic swing. Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the setting operation.)

Before setting

1 Push the [ ] / [ ] button to select 3.Louver setting on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select 1.Swing type, then push the Set [ F2] button.

3 Push the [ ] / [ ] button on the Swing type screen to select the swing type.

Refer to the Owners Manual supplied with the indoor unit about the swing type.

4 Push the [ MENU] button. appears on the display. The unit selection screen appears when the group control is used. Push the [ CANCEL] button on the unit selection screen to finish the setting operation. appears on the display.

NOTE No function appears on the display for the models not equipped with the Swing type setting. Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to

Louver setting. Refer to Information Group control. (page 38)

Louver setting 1.Swing type 2.Louver lock

Return Set

Set

Set

Swing type

Return Fix

Standard Dual Cycle

+00EH97062201_00EN.book Page 15 Saturday, March 12, 2011 8:42 AM

16

Lite-Vision plus Remote Controller Owners Manual

EN

Louver lock * The direction of the louver can be locked individually. Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the setting operation.)

Before setting

1 Push the [ ] / [ ] button to select 3.Louver setting on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select 2.Louver lock, then push the Set [ F2] button.

3 Push the Louver No. [ F1] button to select the louver to set.

The display changes as follows each time the button is pushed.

4 Push the [ ] / [ ] button to select the louver (wind) direction.

Push the [ ] button to move the louver upward. Push the [ ] button to move it downward.

5 Push the [ MENU] button. appears on the display. The unit selection screen appears when the group control is used. Push the [ CANCEL] button on the unit selection screen to finish the setting operation. appears on the display.

Louver setting 1.Swing type 2.Louver lock

Return Set

Set

Set

Louver lock

Return Fix Louver No.

24

3

1

Louver No.

Louver 1 Louver 2 Louver 3 Louver 4 All

Electrical control box

Refrigerant pipe

Drain pipe

(1) (2) (3) (4) (5) Not locked

Louver lock

Return Fix Louver No.

1

4

3

2

+00EH97062201_00EN.book Page 16 Saturday, March 12, 2011 8:42 AM

17

Lite-Vision plus Remote Controller Owners Manual

4. Off reminder timer

Off reminder timer Before setting

Off reminder timer Set the length of time until the air conditioner stops automatically.

NOTE No function appears on the display for the models not equipped with the Louver setting. Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to

3.Louver setting. appears on the display when the Louver lock function is used. Push the [ ] / [ ] button repeatedly to select the Not locked setting as the louver direction to release

the lock. Condensation may occur if the louver is locked in the position (4) or (5) while cooling. Refer to Information Group control. (page 38)

1 Push the [ ] / [ ] button to select 4.Off reminder timer on the menu screen, then push the Set [ F2] button.

1 Push the [ ] / [ ] button to select 1. Off reminder timer.

2 Push the [ F1] button. Push the [ F2] button to turn off the Off reminder timer.

3 Push the [ ] / [ ] button to select 2. Timer setting.

4 Push the + [ F1] / -[ F2] button to set the time.

The time can be set at 10 minutes intervals.

5 Push the [ MENU] button. The screen returns to the menu screen.

Off reminder timer 1.Off reminder timer

ON / OFF 2.Timer setting

Off in 90 min.

Return Fix

Set

Off reminder timer 1.Off reminder timer

ON / OFF 2.Timer setting

Off in 90 min.

Return Fix

+ Off reminder timer

1.Off reminder timer ON / OFF

2.Timer setting Off in

90 min. Return Fix

+

+00EH97062201_00EN.book Page 17 Saturday, March 12, 2011 8:42 AM

18

Lite-Vision plus Remote Controller Owners Manual

EN

NOTE The air conditioner stops running after the specified time has elapsed.

appears on the detailed display when the Off reminder timer is used. The Off reminder timer does not work in the following cases:

When the Off reminder timer is deactivated When an error has occurred While the test operation is in progress While setting the functions When the central control is used (when the run and stop operation is prohibited)

The Off reminder timer cannot be set on the Follower remote controller when the dual remote controller system is used.

The time of Off reminder timer can be set within the range from 30 minutes to 240 minutes. Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to

the menu screen.

Elapsed time of the Off reminder timer

Running Stop Start Off reminder timer

No remaining time

+00EH97062201_00EN.book Page 18 Saturday, March 12, 2011 8:42 AM

19

Lite-Vision plus Remote Controller Owners Manual

5. Schedule timer * Up to 8 different running patterns per day can be programmed with the schedule timer.

Days of the week when the schedule timer is not used can also be set in Holiday setting.

NOTE appears on the detailed display when the Schedule timer is used. The Schedule timer does not work in the following cases:

When the Schedule is deactivated Days of the week when the Schedule timer is set not to work When the clock display is blinking (the clock has not been adjusted) When an error has occurred While the test operation is in progress

1 Push the [ ] / [ ] button to select 5.Schedule timer on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select 1. Schedule timer.

3 Push the [ F1] button. Push the [ F2] button to turn off the Schedule timer.

Schedule timer 1.Schedule timer ON / OFF 2.Condition setting 3.Holiday setting

Return Fix

Set

2.Condition setting Set the running condition of each day. 3. Holiday setting Set the day when the schedule timer is not used.

Schedule timer 1.Schedule timer ON / OFF 2.Condition setting 3.Holiday setting

Return Fix

27

26

25

24

23

22

9:00 12:00 15:00 18:00 21:00 23:00

It is troublesome to adjust the temperature setting for each period of time Are there any solutions for it?

Up to 8 different settings for the run and stop operation and the temperature can be programmed.

Timer 1

Timer 2

Timer 3

Timer 4

Timer 5

Timer 6

Timer 7

Timer 89:00

Start with 26C

Schedule timer can solve the problem.

Temperature setting (C)

B ef

or e

bu si

ne ss

h ou

rs

10:00 Change to 27C

14:00 Change to 27C

17:00 Change to 26C

21:00 Change to 27C

23:00 Operation off.

18:00 Change to 25C

12:00 Change to 25C

V ac

an t t

im e

Lu nc

h tim

e

V ac

an t t

im e

V ac

an t t

im e

D in

ne r t

im e

+00EH97062201_00EN.book Page 19 Saturday, March 12, 2011 8:42 AM

20

Lite-Vision plus Remote Controller Owners Manual

EN

While setting the functions When the central control is used (when the run and stop operation is prohibited)

The Schedule timer cannot be set on the Follower remote controller when the dual remote controller system is used. Adjust the clock before setting the Schedule timer. (page 31) The time can be adjusted by the minute. The temperature can be set within the range from 18C to 29C. (The limited temperature range is applied if the set

temp range limit function is activated.) Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to

the Schedule timer screen. The operation mode for the Schedule timer is the mode selected last time when the air conditioning unit was used.

Condition setting * Up to 8 different running patterns per day can be programmed.

1 Push the [ ] / [ ] button to select 2. Condition setting on the Schedule timer screen.

2 Push the Set [ F2] button. The current setting appears.

Push the Day [ F1] button to confirm the settings for each day. Push the Next [ F2] to confirm the current settings. 8 different settings appears.

3 Push the [ MENU] button.

4 Push the [ ] / [ ] button to select the day to set, then push the [ F1] button.

5 Push the [ ] / [ ] button to select --, ON, OFF

Select ON to change the operation start time and the set temperature settings. Select OFF to change the operation stop time setting. -- indicates that the item has not been set.

6 Push [ F2] to select time or temperature.

When -- is displayed, time or temperature cannot be selected for that item.

7 Push the [ ] / [ ] button to set time or temperature.

Schedule timer 1.Schedule timer ON / OFF 2.Condition setting 3.Holiday setting

Return Fix Set

Set

Day

Next

Schedule timer(1/3)

NextDay

Day : Monday

1. -- --:-- --C

2. -- --:-- --C

3. -- --:-- --C

4. -- --:-- --C

Return Set

Schedule timer(1/3)

Reset

Return Fix

Day : Monday

1. -- --:-- --C

2. -- --:-- --C

3. -- --:-- --C

4. -- --:-- --C

(1)

+00EH97062201_00EN.book Page 20 Saturday, March 12, 2011 8:42 AM

21

Lite-Vision plus Remote Controller Owners Manual

To delete the settings for each day

8 Push the [ F1] button to program the next running pattern.

Up to 8 different running patterns per day can be programmed.

9 Push the [ MENU] button. The screen returns to the day selection screen (1).

10Push the [ ] / [ ] button to select the day to set, (for programming the other days).

Repeat the procedure from step 4 to 9 to program the running patterns for each day. (2)

11Push the [ MENU] button. Push the Yes [ F1] button to confirm the programmed schedule. Push the No [ F2] button to return to the setting screen.

1 Push the Reset [ F2] button on the day selection screen.

2 Push the Yes [ F1] button. The schedule of the day selected is deleted. Push the No [ F2] button to return to the Condition setting screen.

Day : Monday 5. ON 13:00 25C 6. OFF 17:00 --C 7. ON 22:05 25C 8. OFF 23:45 --C

Schedule timer(3/3)

Return Fix

(2)

Yes

No

Schedule timer confirm?

Yes No

Schedule timer

Return

Day : Monday 5. ON 06:00 25C 6. OFF 10:00 --C 7. ON 10:13 25C 8. OFF 11:45 --C

Schedule timer(3/3)

Return Fix Reset

Reset

Yes

No

Delete the day setting?

Yes No

Schedule timer

Return

+00EH97062201_00EN.book Page 21 Saturday, March 12, 2011 8:42 AM

22

Lite-Vision plus Remote Controller Owners Manual

EN

To copy the settings of the previous day

NOTE Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to the Schedule timer screen.

Holiday setting * Set the days of the week when the schedule timer is not used.

NOTE Operations other than the Schedule timer, such as operations on the remote controller or using the central control

are available on the days set as Holiday. Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to

the Schedule timer screen.

1 Push the [ MONITOR] button on the day selection screen.

2 Push the Yes [ F1] button. The schedule of the previous day is copied. Push the No [ F2] button to return to the Condition setting screen.

1 Push the [ ] / [ ] button to select 3. Holiday setting on the Schedule timer screen.

2 Push the Set [ F2] button.

3 Push the Day [ F1] button to select the day, then push the Set [ F2] button to set.

Push the Set [ F2] button so that is displayed on the day when the Schedule timer is not used.

4 Push the [ MENU] button. The screen returns to the Schedule timer screen.

Schedule timer(1/3)

Reset

Day 1. -- --:-- --C 2. -- --:-- --C 3. -- --:-- --C 4. -- --:-- --C

Return Fix

: Tuesday

Yes

No

Copy the previous day setting?

Yes No

Schedule timer

Return

Schedule timer 1.Schedule timer ON / OFF 2.Condition setting

Return Fix

3.Holiday setting Set

Day

Set

SetHoliday setting

Day Set Return Fix

Mon Tue Wed Thu Fri Sat Sun

+00EH97062201_00EN.book Page 22 Saturday, March 12, 2011 8:42 AM

23

Lite-Vision plus Remote Controller Owners Manual

6. Night operation (Only for models equipped with the function)

Set the operation time that suppressing the operation sound of the outdoor unit is preferable such as nighttime.

To set the Night operation time

NOTE The Night operation is not available for multi type air conditioning system. No function appears on the display. The 24-hour operation of Night operation is performed when the end time is the same as the start time. Cooling / heating performance may be reduced a little because the operation priority is put on the quietness for the

Night operation. Adjust the clock before setting the Night operation. (page 31) appears on the detailed display when the Night operation is activated. The Night operation cannot be set on the Follower remote controller in the dual remote controller system. No

function is displayed on the screen.

1 Push the [ ] / [ ] button to select 6.Night operation on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select ON or OFF.

3 Push the [ F1] / [ F2] button to select ON or OFF.

Select ON when the function is used.

4 Push the [ MENU] button. Push the [ ] / [ ] button to select 2.Start time or 3.End time for setting the Night operation time

1 Push the [ ] / [ ] button to select 2.Start time on the Night operation screen.

2 Push the [ F1] / [ F2] button to set the time.

3 Push the [ ] / [ ] button to select 3.End time.

4 Push the [ F1] / [ F2] button to set the time.

5 Push the [ MENU] button. The screen returns to the menu screen.

Night operation 1.Night operation

2.Start time 3.End time

Return Fix

ON/ OFF 22:00 10:00

Set

Night operation 1.Night operation

2.Start time 3.End time

ON/ OFF 22:00 10:00

+ Return Fix

+

+

+00EH97062201_00EN.book Page 23 Saturday, March 12, 2011 8:42 AM

24

Lite-Vision plus Remote Controller Owners Manual

EN

7. Filter sign reset (filter sign) appears on the detailed display (not displayed when it is in the normal display mode) to tell the time for cleaning the filter.

When the filter sign is displayed on the screen (To reset the filter sign)

When the filter sign is not displayed on the screen (To check the remaining time for filter cleaning)

NOTE Clean the filter appears on the display when there is no remaining time for filter cleaning. (filter sign) appears on the detailed display while the air conditioner is stopped. The sign is not displayed when

the remote controller is in the normal display mode. The remaining time for filter cleaning of the header air conditioning unit is displayed when 2 or more indoor units are

connected. The remaining time for filter cleaning differs depending on the connected indoor unit.

Reset the filter sign after cleaning the filter. Refer to the Owners Manual supplied with the indoor unit about how to clean the filter.

Filter check is displayed on the screen if you start running the air conditioner when (filter sign) appears on the detailed display. Push one of the operation buttons to erase the message or wait for more than 5 seconds until the message disappears.

1 Push the [ ] / [ ] button to select 7.Filter sign reset on the menu screen, then push the Set [ F2] button.

2 Push the Reset [ F2] button.

1 Push the [ ] / [ ] button to select 7.Filter sign reset on the menu screen, then push the Set [ F2] button.

2 Push the [ CANCEL] button. The screen returns to the menu screen.

Cool 24

Room A 12:00

Mode Fan Speed

Filter check.

Room A 12:00

Mode Fan Speed

Remaing hour to clean the filter.

Clean the air filter

Reset

Filter sign reset

Return

Set

Reset

Remaing hour to clean the filter.

456hour

Filter sign reset

Return

Set

+00EH97062201_00EN.book Page 24 Saturday, March 12, 2011 8:42 AM

25

Lite-Vision plus Remote Controller Owners Manual

8. Auto grille (Only for models equipped with the function)

Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the setting operation.)

Operate the auto grille function of the indoor unit.

NOTE The air conditioning unit stops running when Auto grille is selected on the remote controller. Auto grille setting is not available for the indoor unit not equipped with the auto grille function.

No function appears on the display. When the button is pushed, it takes a few second before the auto grille starts lifting, lowering, or stops. Refer to the Owners Manual supplied with the auto grille panel or auto grille kit for details about the auto grille

function. Refer to Information for the Group control. (page 38)

1 Push the [ ] / [ ] button to select 8.Auto grille on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to lift or lower the auto grille.

Push the [ ON/OFF]button to stop lifting or lowering the auto grille.

3 Push the [ CANCEL] button. Setting appears on the display, then the screen returns to the menu screen.

Auto grille :Grille up :Grille down

Grille stop ON/OFF

Return Grille

Set

+00EH97062201_00EN.book Page 25 Saturday, March 12, 2011 8:42 AM

26

Lite-Vision plus Remote Controller Owners Manual

EN

9. Energy saving Set for the energy saving operation: Energy saving operation, Set temp range limit, and Return back.

CAUTION Refer to the Owners Manual supplied with the air conditioner about Energy saving operation.

Energy saving operation Set for the power saving operation of the air conditioner.

1 Push the [ ] / [ ] button to select 9.Energy saving on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the item to set.

3 Push the Set [ F2] button.

Item Function 1. Energy saving operation Perform the power saving operation of the air conditioner.

2. Set temp range limit Set the temperature range limit of the remote controller operation.

3. Return back Set the function that changes the temperature back to the specified temperature automatically if the temperature has been changed on the remote controller.

1 Push the [ ] / [ ] button to select 1. Energy saving operation on the Energy saving screen.

2 To start the Energy saving operation: After setting 2. Energy saving ratio and 3. Energy saving schedule, push the [ F1] button to select ON, then push the [ MENU] button. To stop the save operation: Push the [ F2] button to select OFF, then push the [ MENU] button.

Energy saving 1.Energy saving operation

2.Set temp. range limit 3.Return back

Set Return

Set

Set

Energy saving operation 1.Energy saving operation

2.Energy saving ratio 3.Energy saving schedule

ON / OFF

Return Fix

+00EH97062201_00EN.book Page 26 Saturday, March 12, 2011 8:42 AM

27

Lite-Vision plus Remote Controller Owners Manual

Energy saving ratio Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the setting operation.)

NOTE Cooling / heating performance may be reduced a little because its power is saved during the Energy saving operation. appears on the detailed display when the Energy saving operation is activated. The Energy saving operation cannot be set on the Follower remote controller when the dual remote controller system

is used. Adjust the clock before setting the Energy saving schedule operation. (page 31) The remote controller may not be used for setting the Energy saving operation depending on the settings of the

central control remote controller or the outdoor unit. The Energy saving schedule operation is not available when the clock display is blinking (the clock has not been

adjusted).

1 Push the [ ] / [ ] button to select 2. Energy saving ratio on the Energy saving screen, then push the Set [ F2] button.

2 Push the %+ [ F1] / %- [ F2] button to set the value.

The Energy saving ratio can be set within the range from 50% to 100% by 1 %. The lower the value is set, the higher the power saving effect becomes.

3 Push the [ MENU] button. Setting appears on the screen, then the screen returns to the Energy saving operation screen.

Energy saving operation 1.Energy saving operation

2.Energy saving ratio 3.Energy saving schedule

ON / OFF

Return Fix Set

Set

Energy saving ratio Energy saving ratio

75%

%+ % Return Fix

%+ %

+00EH97062201_00EN.book Page 27 Saturday, March 12, 2011 8:42 AM

28

Lite-Vision plus Remote Controller Owners Manual

EN

Energy saving schedule

NOTE The time of the schedule setting for the Save operation can be set within the range from 0:00 to 23:50 at 10 minute

intervals. The save ratio of the schedule setting for the Energy saving operation can be selected only from random (*1), 50%,

or 0%. Adjust the clock before setting the energy saving schedule. (page 31) The lower save ratio is applied when the different save ratios are set at the same hours on the schedule.

*1: Random is the value set at Energy saving ratio.

1 Push the [ ] / [ ] button to select 3. Energy saving schedule on the Energy saving operation screen, then push the Set [ F2] button.

The Clock setting screen appears if the clock has not been adjusted. (page 31)

2 Push the [ ] / [ ] button to set the time and energy saving ratio.

Push the [ F1] / [ F2] button to set the value.

3 Push the [ MENU] button. The screen returns to the Energy saving operation screen.

Energy saving operation 1.Energy saving operation

2.Energy saving ratio 3.Energy saving schedule

ON / OFF

Return Fix Set

Set

Energy saving schedule

Return Fix

1. --:-- ~ --:-- **%

2. --:-- ~ --:-- **%

3. --:-- ~ --:-- **%

4. --:-- ~ --:-- **%

Energy saving schedule

Return Fix

1. 08:00 ~ 12:00 80%

2. 12:00 ~ 13:00 50%

3. 13:00 ~ 17:00 80%

4. 19:00 ~ 08:00 50%

+00EH97062201_00EN.book Page 28 Saturday, March 12, 2011 8:42 AM

29

Lite-Vision plus Remote Controller Owners Manual

Set temp range limit Set the temperature range for each operation mode.

When an error occurs during setting Error appears on the display when the [ MENU] button is pushed under either condition:

1) the upper limit value falls below the lower limit 2) the lower limit value exceeds the upper limit

Push the [ CANCEL] button to erase the error message or wait for 10 seconds until the message disappears. The screen returns to the Set temp range limit screen.

Priority for the set temp range limit function Set the same settings for the set temp range limit on each remote controller when the dual remote controller system is used.

NOTE The operation at the temperature beyond the temperature range may be performed in the following cases: 1.In case that the different values of temperature are set on each remote controller when the dual remote controller

system is used. 2.In case that the temperature beyond the temperature range is set on the central control remote controller.

1 Push the [ ] / [ ] button to select 2. Set temp range limit on the Energy saving screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to set the temperature.

Push the [ F1] / [ F2] button to set the value.

3 Push the [ MENU] button. The screen returns to the Energy saving screen.

Energy saving 1.Energy saving operation

2.Set temp. range limit 3.Return back

Set Return

Set

Set temp range limit Minimum ~ Maximum Cool 18.0C ~ 29.0C Heat 18.0C ~ 29.0C Dry 18.0C ~ 29.0C Auto 18.0C ~ 29.0C

Return Fix

+00EH97062201_00EN.book Page 29 Saturday, March 12, 2011 8:42 AM

30

Lite-Vision plus Remote Controller Owners Manual

EN

Return back The temperature setting returns back to the specified temperature automatically if the temperature has been changed on the remote controller. The time and temperature to return can be set.

NOTE The Return back function cannot be set on the Follower remote controller in the dual remote controller system.

1 Push the [ ] / [ ] button to select 3. Return back on the Energy saving screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select 1. Return back.

3 Push the [ F1] button to select ON.

Select OFF when not using the function.

4 Push the [ ] / [ ] button to select 2. Return time, then push the [ F1] / [ F2] button to set the time.

The time can be set within the range from 10 minutes to 120 minutes at 10 minute intervals.

5 Push the [ ] / [ ] to select 3. Return temp (cooling) or 4. Return temp (heating), then push the [ F1] / [ F2] button to set the temperature.

6 Push the [ MENU] button. The screen returns to the Energy saving screen.

Energy saving 1.Energy saving operation

2.Set temp. range limit 3.Return back

Set Return

Set

+

+

Return back 1.Return back

2.Return time 3.Return temp.(Cool) 4.Return temp.(Heat)

60min 28C 20C

Return Fix

ON / OFF

Return back 1.Return back

2.Return time 3.Return temp.(Cool) 4.Return temp.(Heat)

60min 28C 20C

Return Fix

ON / OFF

+

Return back 1.Return back

2.Return time 3.Return temp.(Cool) 4.Return temp.(Heat)

60min 28C 20C

Return Fix

ON / OFF

+

Return back 1.Return back

2.Return time 3.Return temp.(Cool) 4.Return temp.(Heat)

60min 28C 20C

Return Fix

ON / OFF

+

+00EH97062201_00EN.book Page 30 Saturday, March 12, 2011 8:42 AM

31

Lite-Vision plus Remote Controller Owners Manual

10.Initial setting Set the initial setting of the remote controller.

Initial setting items

Clock Set the year, month, date, and time.

1 Push the [ ] / [ ] button to select 10. Initial setting on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the item to set.

3 Push the Set [ F2] button.

Item Function 1. Clock Settings for the clock (year, month, date, time)

2. Name of room Refer to the Installation / Operation Manual supplied with the remote controller.

3. Screen contrast Contrast adjustment of the LCD

4. Back light Turning on / off the back light of the LCD

5. Key lock Prohibiting the button operations

6. Header / Follower Refer to the Installation / Operation Manual supplied with the remote controller.

7. Language Setting for the language displayed on the remote controller.

8. Press & hold 4sec. Setting for the press and hold operation for the [ ON / OFF] key.

1 Push the [ ] / [ ] button to select 1. Clock on the Initial setting screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the year, month, date, and time.

Push the - [ F1] / + [ F2] button to set the value.

3 Push the [ MENU] button.

Initial setting(1/2) 1.Clock 2.Name of room 3.Screen contrast 4.Backlight 5.Key lock

Set Return

Set

Set

Initial setting(1/2) 1.Clock 2.Name of room 3.Screen contrast 4.Backlight 5.Key lock

Set Return

Set

+

Clock Date Month Year Hour Minute

01 01

2010 00 00

+ Return Fix

+00EH97062201_00EN.book Page 31 Saturday, March 12, 2011 8:42 AM

32

Lite-Vision plus Remote Controller Owners Manual

EN

To adjust the clock

Screen contrast Adjust the contrast of the LCD.

1 Push the [ ] / [ ] button to select 1. Clock on the Initial setting screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the year, month, date, and time.

Push the - [ F1] / + [ F2] button to set the value.

3 Push the [ MENU] button. The screen returns to the Initial setting screen.

The clock display appears on the upper right of the screen. The clock display blinks if the clock setting has

been reset due to power failure or other cause.

NOTE The available date range is from January 1st, 2010 to December 31st, 2099.

1 Push the [ ] / [ ] button to select 3.Screen contrast on the Initial setting screen, then push the Set [ F2] button.

2 Push the - [ F1] / + [ F2] button to adjust.

3 Push the [ MENU] button. The screen returns to the Initial setting screen.

Clock Date Month Year Hour Minute

01 01

2010 00 00

+ Return Fix

Set

+

24 Room A 12:00

Mode Fan Speed Cool

Initial setting(1/2) 1.Clock 2.Name of room 3.Screen contrast 4.Backlight 5.Key lock

Set Return

Set

+

Screen contrast

+

+

Return Fix

+00EH97062201_00EN.book Page 32 Saturday, March 12, 2011 8:42 AM

33

Lite-Vision plus Remote Controller Owners Manual

Backlight Turn on or off the backlight of the LCD.

Key lock Select whether to lock / unlock [ON / OFF], [ ], [MODE](F1) and [FAN SPEED](F2).

1 Push the [ ] / [ ] button to select 4.Backlight on the Initial setting screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select ON or OFF.

3 Push the [ MENU] button. When ON is selected, the back light is turned on during operating with the remote controller. When OFF is selected, the back light is not turned on.

NOTE The back light of the LCD is turned on as a factory default.

1 Push the [ ] / [ ] button to select 5 Key lock on the Initial setting screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select a key to lock / unlock.

3 Push the [ F1] button to select Lock, or [ F2] button to select Unlock.

4 Push the [ MENU] button. When "Lock" is selected, the key cannot be used during key lock. When "Unlock" is selected, the key can be used even during key lock. All keys are unlocked while Check is displayed. For the key lock setting, refer to the owners manual. The factory default is "Lock".

Initial setting(1/2) 1.Clock 2.Name of room 3.Screen contrast 4.Backlight 5.Key lock

Set Return

Set

Backlight ON

OFF

Return Fix

Initial setting(1/2) 1.Clock 2.Name of room 3.Screen contrast 4.Backlight 5.Key lock

Set Return

Set

ON/OFF

Set temp. Lock / Unlock

Lock / Unlock

Key lock(1/2)

Return Fix

Mode

Fan speed Lock / Unlock

Lock / Unlock

Key lock(2/2)

Return Fix

+00EH97062201_00EN.book Page 33 Saturday, March 12, 2011 8:42 AM

34

Lite-Vision plus Remote Controller Owners Manual

EN

Language Select a language for the screen text.

1 Push the [ ] / [ ] button to select 7.Language on the Initial setting screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the language.

3 Push the [ MENU] button. Setting appears on the screen, then the screen returns to the Initial setting screen.

These two screens appear for RBC-AMS51E-ES.

Initial setting(2/2) 6.Header/Follower 7.Language 8.Press & hold 4 sec.

Set Return

Set

Language(1/2)

English French Germany Spanish Portuguese

Franais Deutsch Espaol Portugus

Return Fix

Language(2/2)

Dutch

Return Fix

Nederlands

+00EH97062201_00EN.book Page 34 Saturday, March 12, 2011 8:42 AM

35

Lite-Vision plus Remote Controller Owners Manual

Press & hold 4sec. Set the press and hold operation for the [ ON / OFF] button.

1 Push the [ ] / [ ] button to select 8.Press & hold 4sec. on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select ON or OFF.

3 Push the [ MENU] button. When ON is selected, the air-conditioner starts / stops running when the [ ON / OFF] button is pressed and hold 4 seconds. When OFF is selected, the air-conditioner starts / stops running when the [ ON / OFF] button is pressed.

Initial setting(2/2) 6.Header/Follower 7.Language 8.Press & hold 4 sec.

Set Return

Set

Press & hold 4sec. ON

OFF

Return Fix

+00EH97062201_00EN.book Page 35 Saturday, March 12, 2011 8:42 AM

36

Lite-Vision plus Remote Controller Owners Manual

EN

11.Ventilation (Only for models equipped with the function)

Ventilation Set for the ventilation operation linked to the air conditioner.

Operation

1 Select 11. Ventilation on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select the item to set.

3 Push the Set [ F2] button.

Item Function 1. ON/OFF The run and stop operation of ventilation

2. Fan speed Setting of the fan speed

3. Mode Setting of the ventilation mode

4. 24H ventilation off Setting of 24H ventilation operation stop time.

1 Push the [ ] / [ ] button to select 1. ON/OFF on the Ventilation screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select ON or OFF.

3 Push the [ MENU] button. The screen returns to the Ventilation setting screen.

Ventilation

Set

1.ON/OFF

2.Fan speed 3.Mode 4.24H ventilation off

Return

Set

Set

Ventilation ON

OFF

Return Fix

Set

Ventilation

Set

1.ON/OFF

2.Fan speed 3.Mode 4.24H ventilation off

Return

+00EH97062201_00EN.book Page 36 Saturday, March 12, 2011 8:42 AM

37

Lite-Vision plus Remote Controller Owners Manual

NOTE Impossible appears on the display when no ventilation unit is connected or the individual operation for the ventilation

unit is not activated. 2. Fan speed or 3. Mode, 4. 24H ventilation off is available only for the air conditioning system using the Toshiba

Air to Air Heat Exchanger VN-M*HE series. Refer to the Owners Manual supplied with the Air to Air Heat Exchanger for details.

appears on the detailed display during the ventilation operation when the ventilation unit other than the Toshiba Air to Air Heat Exchanger VN-M*HE series is used and the individual operation for the ventilation unit is activated.

12.Information

Model information Shows the model names and serial numbers.

Service information Check the contact number for service.

1 Push the [ ] / [ ] button to select 12.Information on the menu screen, then push the Set [ F2] button.

2 Push the [ ] / [ ] button to select 1.Model information, then push the Set [ F2] button.

1 Push the [ ] / [ ] button to select 2. Service information on the Information screen, then push the Set [ F2] button.

Information 1.Model information 2.Service information

Set Return

Set

Set

Model information Indoor No. Name

Outdoor No. Name

001Z9999 RAV-SM1104UT-E

001Z9999 RAV-SM1104AT8-E

Return

Information 1.Model information 2.Service information

Set Return

Set

+00EH97062201_00EN.book Page 37 Saturday, March 12, 2011 8:42 AM

38

Lite-Vision plus Remote Controller Owners Manual

EN

Group control The following functions can be set individually for each unit when the group control is used: Wind direction setting, Individual louver setting, Swing type setting, Louver lock setting, Auto grille setting Operate the remote controller according to the procedure below before setting each function.

1 Select the group-controlled function on the menu screen, then push the Set [ F2] button.

2 Push the unit [ F1] button to select the unit to set.

The selected unit changes as follows each time the button is pushed:

3 Push the Set [ F2] button. The setting display for the selected unit appears.

4 Push the [ CANCEL] button. Pushing the [ CANCEL] button returns to the previous screen. Pushing the [ CANCEL] button when setting Swing type, Louver lock, or Auto grille shows SETTING on the screen.

The number (address) of the selected unit appears on the upper left of the screen, unless All is selected for the unit selection.

All is not available for some settings.

Return Unit Set

Wind direction

1 1

1 2

1 3

1 4

1 5

ALL

Set

Unit

1-1 1-2 ALL

Set

Return Unit Set

Wind direction

1 1

1 2

1 3

1 4

1 5

ALL

Return

Wind direction

Swing ON Louver

11

+00EH97062201_00EN.book Page 38 Saturday, March 12, 2011 8:42 AM

39

Lite-Vision plus Remote Controller Owners Manual

6 Maintenance Turn off the power before maintenance.

CAUTION Do not operate the unit with wet hands. Doing so may result in electric shocks.

Daily maintenance Wipe the remote controller with a dry, soft cloth. Using water to clean the remote controller may result in a malfunction.

Cleaning the air filter

Clean the air filter when (filter sign) appears on the detailed display. (page 24) ( is not displayed in the normal display mode.) Clogged air filter reduces the cooling or heating

performance.Cool 24

Room A 12:00

Mode Fan Speed

+00EH97062201_00EN.book Page 39 Saturday, March 12, 2011 8:42 AM

40

Lite-Vision plus Remote Controller Owners Manual

EN

7 Troubleshooting

Confirmation and check

When an error has occurred in the air conditioner, the check code and the unit number of the indoor unit appear on the display of the remote controller.

* The check code appears only while the unit is running.

Push the [ MONITOR] button or [ CANCEL] button to display the check information screen.

While the check information screen appears: Push the Contact [ F1] b

Manualsnet FAQs

If you want to find out how the Toshiba Carrier works, you can view and download the Carrier Toshiba RBC-AMS51E-ES Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Carrier Toshiba as well as other Carrier manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Carrier Toshiba. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Carrier Toshiba RBC-AMS51E-ES Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Carrier Toshiba RBC-AMS51E-ES Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Carrier Toshiba RBC-AMS51E-ES Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Carrier Toshiba RBC-AMS51E-ES Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Carrier Toshiba RBC-AMS51E-ES Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.