Carrier 30XA 080-501 v2 Installation Instructions PDF

1 of 4
1 of 4

Summary of Content for Carrier 30XA 080-501 v2 Installation Instructions PDF

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Catalog No. 04-53300218-01 Printed in U.S.A. Form 30-38SI Pg 1 8-19 Replaces: 30-27SI

Installation Instructions Part No. 00EFN900002200A, 00EFN900002300A (FOR BOTH SIDES OF CHILLER)

Part No. 00EFN900008400A, 00EFN900008500A (FOR ONE SIDE OF CHILLER)

SAFETY CONSIDERATIONS Installation of this accessory can be hazardous due to system pres- sures, electrical components, and equipment locations (such as a roof or elevated structure). Only trained, qualified installers and service technicians should in- stall, start up, and service this equipment. When installing this accessory, observe precautions in the litera- ture and on any labels attached to the equipment, and all other safety precautions that may apply. Follow all safety codes. Wear safety glasses and work gloves. Use care in handling and installing this accessory.

SAFETY CONSIDERATIONS Installation and servicing of air-conditioning equipment can be hazardous due to system pressure and electrical components. Only trained and qualified service personnel should install, repair, or service air-conditioning equipment. Untrained personnel can perform basic maintenance functions of cleaning coils and filters and replacing filters. All other operations should be performed by trained service personnel. When working on air-conditioning equipment, observe precautions in the litera- ture, tags and labels attached to the unit, and other safety precau- tions that may apply. Follow all safety codes. Wear safety glasses and work gloves. Use quenching cloth for unbrazing operations. Have fire extinguisher available for all brazing operations. It is important to recognize safety information. This is the safety- alert symbol . When you see this symbol on the unit and in in- structions or manuals, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, CAUTION, and NOTE. These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices, which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.

INTRODUCTION The accessory condenser coil trim panels are designed to provide an aesthetic, finished appearance for the condenser coil ends of the units. If the unit does not have any trim panels, the kit(s) for Both Sides (00EFN900002200A and 00EFN900002300A) are re- quired. If the unit was ordered with Coil Trim Panels from the fac- tory, the header end side will already have coil trim panels. To complete the Return Bend side, the kit(s) for One Side (00EFN900008400A and 00EFN900008500A) are required. Ta- ble 1 lists the accessory kits that are needed for 30RB060-300 units.

Table 1 30RB Accessory Package Usage

NOTE: The 30RB315-390 units are modular units that are shipped in separate sections as modules A and B, as noted in posi- tion 8 of the model number nomenclature. See Table 2 for a listing of unit sizes and modular combinations.

Table 2 Modular Combinations

NOTE: The X in the model numbers above is a placeholder for a letter indicating the design series.

NOTE: The nameplate for modular units contains only the first two digits of the model number. For example, 315A and 315B nameplates read 31A and 31B. Table 3 lists the accessory kits that are required for 30XA080-501 units. Order kits accordingly. Tables 4 and 5 list the kit contents. Check each item for shipping damage. If any damage is found, file a claim with the shipping agent immediately. If any item is missing or if any part does not assemble properly, notify a Carrier representative.

WARNING

Electrical shock can cause personal injury and death. Shut off all power to this equipment during installation. There may be more than one disconnect switch. Tag all disconnect locations to alert others not to restore power until work is completed.

ACCESSORY PART NO.

30RB UNIT SIZE

PACKAGE(S) REQUIRED (Quantity Required)

00EFN900002200A (BOTH SIDES) 00EFN900008400A (ONE SIDE)

All 1

00EFN900002300A (BOTH SIDES) 00EFN900008500A (ONE SIDE)

060-080 None 090-110 1 120-150 2 160,170 3 190-225 4

250 5 275 6 300 7

MODULAR UNITS MODULE A MODULE B 30RBX315 30RBX160 30RBX160 30RBX330 30RBX170 30RBX160 30RBX345 30RBX170 30RBX170 30RBX360 30RBX190 30RBX170 30RBX390 30RBX190 30RBX190

30RB060-390 30XA Fixed Speed 080-501

30XA Variable Speed 140-352 Condenser Coil Trim Panel Accessory

2

Table 3 30XA Accessory Package Usage

Table 4 Accessory Contents (For both sides of chiller)

Table 5 Accessory Contents (For one side of chiller)

INSTALLATION 1. Lock out and tag out all disconnects. 2. Using screws provided, install Cover Support at both

Header end and Return Bend end (00EFN900002200A and 00EFN900002300A) or Return Bend end (00EFN900008400A and 00EFN900008500A) of each condenser coil base. See Fig. 1.

Fig. 1 Installation of Cover Support

3. Using screws provided, install a left hand and right hand coil cover on each side of the chiller. See Fig. 2 and 3.

4. For 00EFN900002300A and 00EFN900008500A, using screws provided, install a center cover at each end of each condenser coil section (sizes 30RB090-300, 30XA080-501). See Fig. 4.

5. Restore power.

ACCESSORY PART NO.

30XA UNIT SIZE

PACKAGE(S) REQUIRED (Quantity Required)

00EFN900002200A (BOTH SIDES)

00EFN900008400A (ONE SIDE)

All 1

00EFN900002300A (BOTH SIDES)

00EFN900008500A (ONE SIDE)

080,082 1 090-122 2 140-162 3 180-202 4 220-242 5 260-302 6 325-352 7 400,401 8

450,451,476,500 9 501 11

ACCESSORY PART NO. DESCRIPTION QTY

00EFN900002200A

Left hand cover, 00PSN000035700A 2 Right hand cover, 00PSN000035900A 2

Cover support, 00PSN000036100A 4 No. 10 Screw, 00PPN500000401A 36

00EFN900002300A Center cover, 00PSN000035800A 2 Cover support, 00PSN000036100A 2 No. 10 Screw, 00PPN500000401A 16

ACCESSORY PART NO. DESCRIPTION QTY

00EFN900008400A

Left hand cover, 00PSN000035700A 1 Right hand cover, 00PSN000035900A 1

Cover support, 00PSN000036100A 2 No. 10 Screw, 00PPN500000401A 18

00EFN900008500A Center cover, 00PSN000035800A 1 Cover support, 00PSN000036100A 1 No. 10 Screw, 00PPN500000401A 8

COIL COVER SUPPORT

CONDENSER COIL BASE

MOUNTING SCREWS

HEADER END

RETURN BEND END

CONDENSER COIL BASE

COIL COVER SUPPORT

3

Fig. 2 Installation of Left Hand Cover

Fig. 3 Installation of Right Hand Cover

Fig. 4 Installation of Center Cover

LEFT HAND COIL COVER

RIGHT HAND COIL COVER

OUT

CENTER COIL COVER

Manualsnet FAQs

If you want to find out how the 30XA 080-501 Carrier works, you can view and download the Carrier 30XA 080-501 v2 Installation Instructions on the Manualsnet website.

Yes, we have the Installation Instructions for Carrier 30XA 080-501 as well as other Carrier manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Instructions should include all the details that are needed to use a Carrier 30XA 080-501. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Carrier 30XA 080-501 v2 Installation Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Carrier 30XA 080-501 v2 Installation Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Carrier 30XA 080-501 v2 Installation Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Carrier 30XA 080-501 v2 Installation Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Carrier 30XA 080-501 v2 Installation Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.