Contents

Canon WFT-E2 II Instruction Manual PDF

Pages 100
Year 2010
Language(s)
English en
1 of 100
1 of 100

Summary of Content for Canon WFT-E2 II Instruction Manual PDF

Page 3

These instructions should be followed only after your wireless or wired LAN and FTP server settings are complete... For details on configuring these settings, refer to the documentation provided with the respective equipment... Camera menu screens depicted in this manual are generally those of the EOS-1D Mark III... Terms in brackets [ ] indicate button or icon names or other software elements... Brackets also denote camera menu items... Page numbers in parentheses indicate where you can find additional information... Instructions on camera operations should be followed only after you have read the Camera Instruction Manual and are familiar with operating the camera... Sections of this manual labeled with the following symbols contain information of the corresponding nature...

Page 4

2 Transferring Images to an FTP Server 21 Configuring FTP Communication Settings... 22 Automatic Image Transfer After Each Shot ... 24 Transferring Images Individually ... 26 Batch Transfer ... 28 Checking Image Transfer History ... 33 Viewing Transferred Images ... 34

Page 5

9 Reference 87 Creating and Registering Captions ... 88 Specifications... 89 Index ... 98

Page 6

To comply with local radio wave regulations in various areas around the world, Canon offers four region-specific versions of the transmitter (WFT-E2 IIA, E2 IIB, E2 IIC, and E2 IID) as described below... Please do not use your model (version) of transmitter in regions it was not designed for... For information on other areas where the transmitter can be used, contact a Canon Service Center...

Page 7

The following actions may be punishable under law... Disassembling or modifying the transmitter, or removing the certification label on it... Do not use the transmitter near other devices that emit radio waves, such as medical equipment or electronic devices... The transmitter may interfere with operation of these devices... Use the transmitter only with a compatible EOS DIGITAL camera... Using it with incompatible cameras may cause malfunction, accidents, and other problems not covered under warranty... Use the transmitter as a wireless or wired LAN device as described in this instruction manual... If you use the transmitter for any other purpose, Canon cannot be held liable for any loss or damage that may occur...

Page 8

The transmitter is a precision instrument... Do not drop it or subject it to shock... The transmitter is not waterproof... Do not use it underwater... Wipe off any moisture with a clean, dry cloth... If the transmitter has been exposed to salty air, wipe it with a clean damp cloth after wringing it out to remove excess water... Never leave the transmitter near any equipment that generates a strong magnetic field, such as magnets or electric motors... Do not leave the transmitter in excessive heat, such as in a vehicle in direct sunlight... High temperature may damage the transmitter... Do not wipe the transmitter using cleaners containing organic solvents... If the transmitter becomes difficult to clean, take it to the nearest Canon Service Center... To avoid corrosion, do not store the transmitter where there are strong chemicals, such as in darkrooms or chemical labs...

Page 9

*1: For storing portable hard disks or other devices... *2: Attach this cap before connecting the USB cable in rainy weather or under other adverse conditions...

Page 10

3 Attach the transmitter... Align the attachment pin with the WFT-E2 II/E2 IIA mounting hole on the camera... Push the terminal firmly into the camera... As you push the terminal into the camera, turn the tightening screw until it stops rotating to attach the transmitter securely...

Page 11

In addition to wireless and wired LAN functions, the WFT-E2 II can communicate with external media and GPS devices... For instructions on operations after you have attached the transmitter to the camera, click one of the following chapter titles to view the corresponding page...

Page 13

Getting Ready The connection wizard helps you follow the steps to connect the transmitter to an existing wireless or wired LAN... To connect to a wireless LAN, prepare the wireless LAN device (wireless LAN access point or wireless LAN adapter) and computer in advance so that they are ready for you to connect the transmitter to the wireless network... When configuring the basic network settings, bring the transmitter within 3 m/9... 8 ft... of the wireless LAN device... To connect to a wired LAN, use a LAN cable to connect the transmitter and computer... Prepare the transmitter for connection to the wired network...

Page 14

Pressing the shutter button or other camera controls during configuration by the connection wizard will close the connection wizard... Do not press the shutter button or other controls until configuration is finished... On the [5] tab, set [Auto power off] to [Off]... If auto power off is activated, the connection wizard will be closed during the configuration process...

Page 15

Computer Operating Systems Operation via [FTP trans... ] requires that Windows Vista (Business, Enterprise, or Ultimate Edition for 32- or 64-bit systems), Windows XP Professional, Windows 2000, or Mac OS X 10... 4 be installed on your computer... In addition, the computer must be prepared as an FTP server in advance... For instructions on preparing your computer as an FTP server, refer to the computer documentation... Windows Vista Home Premium and Home Basic Edition as well as Windows XP Home Edition cannot be used because FTP server functionality is not supported...

Page 16

1 Indicates whether the device is in infrastructure or ad hoc mode 2 An icon is displayed if the wireless LAN device is encrypting communication 3 Indicates the first 9 characters of the SSID 4 Indicates the channel used

Page 17

3 Enter the encryption key... To switch between input areas, press the <H> button... To move the cursor, turn the <5> dial... In the bottom input area, turn the <5> dial and press <0> to enter the encryption key... If you make a mistake, press the <L> button to erase it... Press the <7> button to go to the next screen... To return to the previous screen, press the <6> button... The entry is erased...

Page 18

[Manual setting] The [IP address set... ] screen is displayed after you select manual configuration... If [Auto setting] results in an error, enter the IP address manually... As the IP address, enter the IP address assigned to the camera... Enter the [IP address], [Subnet mask], [Gateway], and [DNS address] on each screen as they are displayed... If you are not sure what to enter, refer to page 86, Checking Network Settings, or ask the network administrator or another person knowledgeable about the network...

Page 19

Windows Vista Users Before performing the operations from page 35, perform the operations below... If these operations are not performed, the WFT Pairing Software described on page 36 may not start... Open the [C Drive] [Program Files] [Canon] [EOS Utility] [WFTPairing] folder (in this order), and then double-click the [WFT FirewallSettings] icon... After performing this operation, perform the operation on page 36...

Page 20

Entering text In the bottom input area, turn the <5> dial to move the cursor and press <0> to enter text... You can also move the cursor using <9>...

Page 21

With FTP transfer, you can automatically transfer each image to the FTP server as you shoot or transfer a set of shots together...

Page 22

If you have set the DNS server IP address setting to [Auto assign] or [Manual setting], the screen at left is displayed... For instructions on screen operations, refer to Virtual Keyboard Operation (p... 20)... Enter the FTP servers server name or IP address...

Page 23

6 Complete the [Target folder] settings... Select [Root folder] to have images saved in the root folder as specified in FTP server settings... (p... 34) Select [Select folder] to specify a subfolder in the root folder... If no folder exists, a folder will be created automatically... Turn the <5> dial to select [OK], and then press <0> to connect to the FTP server...

Page 24

An image can be automatically transferred to the FTP server immediately after shooting... You can also continue shooting even while images are being transferred... Before shooting, be sure to insert a memory card in the camera or connect external media (p... 55)... If you shoot without recording images, they cannot be transferred...

Page 25

If the camera is set up to record larger JPEGs on a CF card and smaller JPEGs on an SD card and you want to transfer the smaller JPEGs, set [Larger/smaller JPEG] to [Smaller JPEG]... If the camera is set up to record RAW images on a CF card and JPEGs on an SD card, specify which images to transfer in the [RAW+JPEG transfer] setting... Similarly, complete the same setting if RAW+JPEG images are recorded simultaneously on a single memory card... If images of the same size are recorded on a CF card, SD card, and external media at the same time, images recorded on the CF card are transferred, regardless of the image quality (compression)...

Page 26

Simply press <0> to transfer the currently displayed image... You can also add a caption before transferring images... You can also continue shooting even while images are being transferred...

Page 27

You can add a registered caption to each image before transfer... This is effective if you want to inform the recipient the printing quantity, for example... The caption is also added to images stored on the camera... For instructions on creating and registering captions, refer to page 88... You can check for captions added to images by examining the Exif information, in the user comments...

Page 28

After shooting, you can select multiple images as desired and transfer them all at once... You can also transfer unsent images or images that could not be sent previously... If both a CF card and SD card are in the camera, or if external media is connected, images are transferred from the source specified on the menu [5] tab, in [Record func+media/folder sel... ] [Record/play]... You can also continue shooting even while images are being transferred...

Page 29

4 Transfer the images... Select [Transfer]... Select [OK] on the confirmation screen displayed next... A transfer progress screen is displayed...

Page 30

Selecting [Clear folder transf... history] will set the transfer history of images in the selected folder to unsent... This enables you to resend all the images in the folder later by selecting [Folder images not transferd]...

Page 31

Selecting [Clear cards transf... history] will set the transfer history of images on the memory card to unsent... This enables you to resend all the images on the card later by selecting [Card images not transferred]...

Page 32

You can use the menu even during image transfer... However, to prevent transfer problems, some menu items are unavailable during transfer, including [WFT settings], [Protect images], [Erase images], and [Format]...

Page 33

On the [Image sel... /transfer] screen, you can check the number of images for transfer as well as the transfer history of images in the selected folder or memory card... Specifically, you can check the number of images classified as [Images failed trans... ] and [Images transferred]...

Page 34

Under the default transmitter settings, transferred images will be stored in the root folder specified in the FTP server settings, in a folder structure such as A/DCIM/100EOS1D which is automatically created... Additionally, if you have selected a CF card as the media for recording and playback, a folder structure such as A/DCIM/100EOS1D is automatically created for image storage... For an SD card, B/DCIM/100EOS1D is created, and for external media, C/DCIM/100EOS1D is created... (CF card images are assigned to the A folder, SD card images to the B folder, and external media images to the C folder... )

Page 35

You can use EOS Utility to shoot remotely over a wireless or wired LAN... In addition to remote capture, all camera operations in EOS Utility are supported because a wireless or wired network is used with this option instead of the USB cable...

Page 36

With EOS Utility, you can use the included WFT Pairing Software to establish a connection between the transmitter and a computer... WFT Pairing Software is installed automatically during easy installation of the software provided with the camera... If it is not installed, install it on the computer for communication with the transmitter before this procedure... The configuration procedure is as follows, using Windows XP as an example...

Page 37

5 Press <0>... Turn the <5> dial to select the set number, and then press <0>... After you turn the <5> dial to select [OK] and press <0>, the connection wizard is closed and EOS Utility starts up... The <LAN> lamp on the transmitter is lit in green... Settings information is stored on the camera... It is not stored on the transmitter...

Page 38

There is no need to complete pairing again if you will continue using a particular camera, transmitter, and computer together after pairing without changing the settings... Before your next PTP session, simply turn on the camera to which the transmitter is attached and start the pairing software... The connection between the camera and computer will be established automatically... You can add the pairing software to the software launched at startup of your computer... In EOS Utility on the [Preferences] [Basic Settings] tab, select [ Add WFT Pairing Software to the Startup folder]...

Page 39

For EOS Utility instructions, refer to the Software Instruction Manual (PDF)... You can take full advantage of EOS Utility via the transmitter just as via a USB connection, without restrictions...

Page 41

You can use a web browser to shoot remotely over a wireless or wired LAN... In addition, images on a memory card in the camera can be viewed and downloaded to a computer...

Page 42

3 Select a user number... With WFT Server, you can connect the camera to up to three computers... Here, select a user number to prevent conflicts when users at other computers are connected to the transmitter simultaneously... Turn the <5> dial to select [User *], and then press <0>...

Page 43

4 After you select [Login name] and [Password], the following input screen is displayed... For instructions on input screen operations, refer to Virtual Keyboard Operation (p... 20)...

Page 44

In the web browser, display WFT Server, a screen for transmitter operations... Make sure you have already established a connection between the camera and computer...

Page 45

2 Take the picture... Set the lens focus mode switch to <g> and adjust the focus... In the browser, click the release button of the simulated remote control... The camera will shoot when the button is released... The captured image is displayed in the simulated camera monitor in the browser... Captured images are stored on the memory card...

Page 46

3 Download images to the computer... Click the image... The image is displayed at a larger size... Follow the web browser instructions to download the image to the computer... To return to the remote capture screen, click [Return]...

Page 47

2 Select the memory card... If the camera is connected to external media, the corresponding icon is also displayed... Click the [DCIM] folder and select the folder where images are stored...

Page 48

4 Download images to the computer... Click a thumbnail... The image is displayed at a larger size... Follow the web browser instructions to download the image to the computer... Click [Return] to return to the image viewing screen...

Page 50

Example of FTP transfer and wired LAN settings Example of FTP transfer and wireless LAN settings

Page 51

Settings originally completed using the connection wizard can be changed as follows... You can also change IP security settings (IPsec) not completed using the connection wizard, as well as other settings, such as the setting that determines what happens if an image of the same file name as an existing file is sent to the FTP server... (p... 52)

Page 52

Configured in [FTP server] [Directory structure]... Selecting [Camera] automatically creates a folder structure matching that of the cameras (such as A/DCIM/100EOS1D) in the servers root folder for image storage... If you have created a subfolder in the root folder by changing the [Target folder] setting, a folder structure such as A/ DCIM/100EOS1D is automatically created in that folder for image storage... Selecting [Default] will use the root folder for image storage... If you have created a subfolder in the root folder by changing the [Target folder] setting, images are saved in that folder...

Page 53

3 Select the settings number... Here, select the settings number that identifies the LAN settings...

Page 54

6 Select [Save]... The settings are now saved as a file on the memory card... The file name is determined automatically by the camera: WFTNPF, followed by a number (01 to 99) and the extension NIF... You can rename the file as desired by selecting [Change file name]...

Page 55

Use media conforming to the USB Mass Storage Class Specification... If an external hard disk drive is used, use a self-powered drive... Bus- powered drives do not work in some situations... The main image storage area must be formatted with a FAT16 or FAT32 file system... Use media with a main image storage area of less than 1 TB (terabyte), with 512 bytes per sector... Do not use external media equipped with a card slot...

Page 56

Before connecting external media to the transmitter, switch the camera power switch to <2>... Also turn off external media that has its own power supply... When connecting external media, be sure to use the USB cable provided with the camera... The transmitter USB port is not hot-pluggable... USB cables cannot be connected or disconnected at any time... Follow the instructions in this section when connecting or disconnecting USB cables...

Page 57

5 Select [OK]... Camera operations such as shooting, menu display, or image playback are not possible until the connection is established... When the transmitter is connected to the external media, the transmitters <USB> lamp is lit in green and a message is displayed indicating that a connection has been established... When the confirmation message is displayed, select [OK]...

Page 58

The connection will not be terminated if you simply turn off the camera and external media... If you unplug external media while the connection is still active, plug the external media into the USB port again and follow the preceding steps to terminate the connection...

Page 59

Although the <USB> lamp will blink in green briefly if the camera is restarted or recovering from auto power off, shooting is still possible... Any images captured at this time are stored temporarily in the camera's internal memory and then recorded on external media when the <USB> lamp remains lit in green...

Page 60

By default, the folder name comprises the current date (last two digits of the year, in addition to the month and day) and numbers representing the order the folder was created, in a range of 01 to 99... Always use 8 characters for the folder name...

Page 61

3 On the [3] tab, select [Image copy]... For subsequent instructions, refer to the Camera Instruction Manual (page 125)... Operations are the same as when using a CF or SD card, except that the external media icon <u> is displayed...

Page 62

You can also backup the MISC folder, where printing and transfer instructions are stored... External media cannot be backed up onto memory cards... If the backup destination already has a folder of the same number containing images of the same number, [Skip image and continue], [Replace existing image], and [Cancel backup] are displayed... Select the backup method and press <0>... [Skip image and continue]: All images are backed up except for images of the same number as

Page 63

When the message indicating completion is displayed, select [OK]...

Page 64

Where the DCIM Folder is Stored The DCIM folder is stored in a directory indicated by a file path such as [u/09103102/]... The target folder name comprises the current date (last two digits of the year, in addition to the month and day) and numbers representing the order the folder was created, in a range of 01 to 99... In the example shown at left, the folder displayed when the external media is opened (that is, the root directory) is named 09103102... The DCIM folder is stored in this folder... This is also the target folder name displayed when using the regular [Backup] option...

Page 65

5 Enter the [Folder name]... Always use 8 characters for the folder name... For instructions on entering the folder name, refer to Virtual Keyboard Operation (p... 20)...

Page 66

The provided external media case can hold portable hard disks up to 120 x 75 x 15 mm/ 4... 72 x 2... 95 x 0... 59 in...

Page 67

Commercially available GPS devices connected via USB can obtain information including the latitude, longitude, altitude, and date and time of shooting and add it to images... The additional information can be checked on the camera as well as by using GPS-compatible mapping software...

Page 68

Turn off the GPS device and camera before connecting them... When connecting GPS devices, be sure to use the USB cable provided with the camera... The transmitter USB port is not hot-pluggable... USB cables cannot be connected or disconnected at any time... Follow the instructions in this section when connecting or disconnecting USB cables...

Page 69

5 Select [OK]... After selecting [OK], turn the GPS device on... It may take a few minutes to establish a connection with the GPS device... Camera operations such as shooting, menu display, or image playback are not possible until the connection is established... When the transmitter is connected to the GPS device, the transmitters <USB> lamp is lit in green and a message is displayed indicating that a connection has been established... When the confirmation message is displayed, select [OK]...

Page 70

The connection will not be terminated if you simply turn off the camera and GPS device... If you unplug GPS device while the connection is still active, plug the GPS device into the USB port again and follow the preceding steps to terminate the connection...

Page 72

11 (p... 73) 12 (p... 73) 21 (p... 73) 22 (p... 74) 23 (p... 74) 24 (p... 75) 25 (p... 76) 26 (p... 76) 31 (p... 77) 32 (p... 77) 33 (p... 77) 34 (p... 77) 41 (p... 78) 42 (p... 79) 43 (p... 79) 44 (p... 79) 45 (p... 80) 46 (p... 80) 47 (p... 81) 61 (p... 81) 62 (p... 82) 63 (p... 82) 64 (p... 82) 65 (p... 83) 66 (p... 83) 67 (p... 83) 81 (p... 84) 99 (p... 84)

Page 73

What to check on the DHCP server Is the DHCP server on? Turn the DHCP server on... Are there enough addresses for assignment by the DHCP server? Increase the number of addresses assigned by the DHCP server... Remove devices assigned addresses by the DHCP server from the network to reduce the number of addresses in use... Is the DHCP server working correctly? Check the DHCP server settings to make sure it is working correctly as a DHCP server... If applicable, ask your network administrator to ensure the DHCP server is available...

Page 74

What to check on the DNS server Is the DNS server on? Turn the DNS server on... Are the DNS server settings for IP addresses and the corresponding names correct? On the DNS server, make sure IP addresses and the corresponding names are entered correctly... Is the DNS server working correctly? Check the DNS server settings to make sure the server is working correctly as a DNS server... If applicable, ask your network administrator to ensure the DNS server is available...

Page 75

What to check on the transmitter The transmitters proxy server setting is [Enable]... Does the error occur under this setting? If no proxy server is used, set the transmitters proxy server setting to [Disable]... (p... 22) Do the transmitters [Address setting] and [Port No... ] settings match those of the proxy server? Configure the transmitters proxy server address and port number to match those of the proxy server... (p... 22) In the transmitters [Proxy server] settings, have you only entered [Server name]? If the proxy servers [Address] setting is not configured on the transmitter, enter it along with the DNS server address... (p... 18) Make sure the server name and port number for the proxy server are entered correctly... (p... 22)

Page 76

What to check on the DHCP server Is the DHCP server on? Turn the DHCP server on... Are the DHCP server settings for IP addresses and the corresponding names correct? On the DHCP server, make sure IP addresses and the corresponding names are entered correctly... Is the DHCP server working correctly? Check the DHCP server settings to make sure it is working correctly as a DHCP server... If applicable, ask your network administrator to ensure the DHCP server is available...

Page 77

Have you connected a USB device other than external media or a GPS device? Connect only external media or a GPS device... The device is incompatible with the transmitter... External media with built-in card slots are not compatible... Similarly, USB card readers cannot be used... Is the external media formatted with a FAT16 or FAT32 file system? Format the external media with a FAT16 or FAT32 file system using the computer... The GPS device is incompatible with the transmitter... Among GPS devices, we recommend devices for which operation has been verified by Canon...

Page 78

What to check on the transmitter On the transmitter, does the FTP servers IP address setting match the servers actual address? Configure the IP address on the transmitter to match the actual FTP server address... (p... 22) Are the transmitter and wireless LAN device configured with the same encryption key for authentication? This error occurs if the encryption keys do not match when the authentication method for encryption is [Open system]... The setting is case-sensitive, so check upper- and lower-case characters... Make sure the correct encryption key for authentication is entered on the transmitter... (p... 17) On the transmitter, does the [Port number setting] for the FTP server match the actual port number of the FTP server? Configure the same port number (usually 21) on the transmitter and FTP server... Configure the port number on the transmitter to match the actual FTP server port number... (p... 22) If only the FTP servers [Server name] is configured on the transmitter, are the DNS server settings complete? If the FTP servers [Address] setting is not configured on the transmitter, enable use of the DNS server on the transmitter and enter its address... (p... 18) Make sure the FTP server name is entered correctly... (p... 22)

Page 79

Are you connecting to the FTP server via a broadband router? Some broadband routers use a firewall to restrict access to the FTP server... Change the firewall settings to allow access to the FTP server... You may be able to access the FTP server by setting [Passive mode] to [Enable] on the transmitter... (p... 52) If you are using Windows XP Service Pack 2, is access to the FTP server blocked by the [Windows Firewall]? Change the Windows Firewall settings to allow access to the FTP server...

Page 80

What to check on the FTP server The connection was terminated by the FTP server... Restart the FTP server... Do the user rights for the FTP server allow reading, writing, and log access? Configure the FTP servers user rights to allow reading, writing, and log access... Do user rights allow access to the target folder on the FTP server? Configure the user rights for access to the target folder on the FTP server to allow saving images from the transmitter... Is the FTP server on? Turn the FTP server on... The server may have been turned off because of an energy- saving mode... Is the hard disk of the FTP server full? Increase available space on the hard disk...

Page 81

What to check on the wireless LAN device Is the wireless LAN device on? Turn on the wireless LAN device... When you are using WFT-E2 IID with wireless LAN devices supporting IEEE 802... 11a, are the device settings locked on IEEE 802... 11a? Configure the wireless LAN device to allow access via IEEE 802... 11b and g... If you are filtering by MAC address, did you register the transmitters MAC address on the wireless LAN device? Register the transmitters MAC address (p... 50) on the wireless LAN device...

Page 82

Are the transmitter and wireless LAN device configured for the same authentication method? The transmitter supports these authentication methods: [Open system], [Shared key], [WPA-PSK], and [WPA2-PSK]... (p... 16) When using an AirPort for communication in infrastructure mode, [Open system] is not supported... Configure a [Shared key] on the transmitter... (p... 16) Are the transmitter and wireless LAN device configured with the same encryption key for authentication? The setting is case-sensitive, so check upper- and lower-case characters... Make sure the correct encryption key for authentication is entered on the transmitter and wireless LAN device... (p... 17) If you are filtering by MAC address, did you register the transmitters MAC address on the wireless LAN device? Register the transmitters MAC address (p... 50) on the wireless LAN device...

Page 83

Are any obstacles blocking the line of sight between the transmitter and the antenna of the wireless LAN device? Move the antenna to a position clearly visible from the point of view of the transmitter... (p... 85) The wireless LAN connection was lost, for some reason, and the connection cannot be restored... The following are possible reasons: excessive access to the wireless LAN device from other terminals, a microwave oven in use nearby (interfering with IEEE 802... 11b/g reception), poor weather and high humidity... (p... 85)

Page 84

Is the LAN cable securely connected? Reconnect the LAN cable between the transmitter and server... Because the cable may be severed, try using another cable to connect the devices... Is the hub or router on? Turn on the hub or router... Is the server on? Turn the server on... The server may have been turned off because of an energy-saving mode...

Page 85

If multiple transmitters are connected to a single wireless LAN device, be careful not to use duplicate camera IP addresses... Note that the transmission rate drops when multiple transmitters access a single wireless LAN device... To reduce radio wave interference when using multiple transmitters and wireless LAN devices in the same area, it is advisable to use three groups of devices or fewer... In this case, leave a gap of four channels between each wireless LAN channel... For example, use channels 1, 6, and 11; or channels 2, 7, and 12; or channels 3, 8, and 13... When IEEE 802... 11a can be used, switch to IEEE 802... 11a and specify a different channel...

Page 86

In Mac OS X, open the [Terminal] application, type ifconfig -a, and press the <Return> key... The IP address assigned to the computer is indicated in the [en0] item by [inet], in the format ***... ***... ***... ***... To avoid using the same IP address for the computer and other devices on the network when configuring the IP address assigned to the camera (page 18), change the rightmost numbers here... * For information on the [Terminal] application, refer to the Mac OS X help...

Page 88

Follow these steps to create captions and register them on the camera, as introduced in Adding a Caption Before Transfer (p... 27)... When creating and registering captions, use a computer on which EOS Utility is installed... Before you begin, attach the transmitter to the camera and use the USB cable provided with the camera to connect the camera to the computer... For instructions on connecting the camera to the computer with the USB cable and starting EOS Utility, refer to the Software Instruction Manual (PDF) provided with the camera... Note that captions cannot be created for cameras without an attached transmitter...

Page 89

WFT-E2 IID: 2,412 - 2,462 MHz, channels 1 - 11 Connection method: Infrastructure or ad hoc mode Security: Authentication method: Open, shared key, WPA-PSK, and WPA2-PSK

Page 90

All preceding specifications are based on Canon testing standards... Transmitter specifications and appearance are subject to change without notice...

Page 94

Canon Inc... tmto prohlauje, e tento CH9-1161 je ve shod se zkladnmi poadavky a dalmi p slunmi ustanovenmi sm rnice 1999/5/ES... Undertegnede Canon Inc... erklrer herved, at flgende udstyr CH9-1161 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF... Hiermit erklrt Canon Inc... , dass sich das Gert CH9-1161 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet... Kesolevaga kinnitab Canon Inc... seadme CH9-1161 vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele... Hereby, Canon Inc... , declares that this CH9-1161 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC... Por medio de la presente Canon Inc... declara que el CH9-1161 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE...

Page 95

The available scientific evidence does not show that any health problems are associated with using low power wireless devices... There is no proof, however, that these low power wireless devices are absolutely safe... Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used... Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects... Many studies of low-level RF exposures have not found any biological effects... Some studies have suggested that some biological effects might occur, but such findings have not been con- firmed by additional research... DS585802/ DS585804 has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules...

Page 98

A Account ... 42 Ad hoc ... 6, 16 AES ... 16 Area of use ... 6 Authentication... 16 Auto setting ... 18 Automatic transfer ... 24

Page 99

T Target folder ... 23 TKIP ... 16 Transfer destination... 34 Transfer history ... 33 Transfer with SET... 26 Transferring images, automatic... 24 Transferring images, individual images... 26 Transferring images, specifying sizes or types ... 25 Troubleshooting... 71

Page 100

This instruction manual is current as of November 2009... For information on using the transmitter with accessories introduced after this date, contact your nearest Canon Service Center...

Manualsnet FAQs

If you want to find out how the WFT-E2 II Canon works, you can view and download the Canon WFT-E2 II Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Canon WFT-E2 II as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Canon WFT-E2 II. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon WFT-E2 II Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon WFT-E2 II Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon WFT-E2 II Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon WFT-E2 II Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon WFT-E2 II Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.