Summary of Content for Canon High Capacity Stacker-G1 Safety Guide PDF
Regulation notices... 12
All the products have been tested in accordance with the strictest international safety standards... Please read the following sections before you connect the machine to the power supply... These sections contain important information with regard to the user safety and the prevention of equipment problems... Make sure that you observe the safety rules hereinafter... This helps to assure that you can work with the product/system safely... Make sure that you observe all the precautions mentioned below...
Instructed person This safety manual describes safeguards for the protection of an instructed person... Instructed person is a term applied to persons who have been instructed and trained by a skilled person, or who are supervised by a skilled person, to identify energy sources that may cause pain and to take precautions to avoid unintentional contact with or exposure to those energy sources...
WARNING Make sure that the machine is placed on a level, horizontal surface of sufficient strength... Do not place this machine on an unstable or tilted surface... Do not place this machine in a location that is subject to lots of vibrations and shocks... Do not use flammable sprays, liquids or gases near this product, because this could cause a
Immediately stop using the machine if the machine becomes excessively hot, emits smoke, or produces unusual odours or noises... Immediately turn OFF the power switch and unplug the power cord from the power outlet... Then call your authorised service representative...
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment... This equipment generates, uses, and can radiate, radio frequency energy and, if not installed and used in accordance with the Operator's Manual, may cause harmful interference to radio communications... Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense...
This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and your national law... This product should be handed over to a designated collection point, e... g... , on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE)... Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE... At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources... For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service... For more information regarding return and recycling of WEEE products, please visit "http://www... canon-europe... com/environment"... Reference: Directive 2012/19/EU...
Canon and Oc brand products sold in Vietnam market comply with following Circular and Decision -"Circular No... 30/1011/TT-BCT dated August 10,2011 of the Ministry of Industry and Trade stipulating temporarily the permissible content limitation of some toxic chemicals in the electronic, electrical products" -Decision No... 4693/QD-BCT correcting Circular 30/2011/TT-BCT For the statement on Canon Marketing Vietnam website, please see the last paragraph on the web page of the following URL: "http://www... canon... com... vn/personal/web/company/about/csr? languageCode"...
Please refer to the corresponding Safety Data Sheets for specific safety information, including the dimensions of the product, the recommended room volume and ventilation rate... You can download the Safety Data Sheets from the support site of your product at "http:// global... oce... com/support/"...
Before you use your product, you must always download the latest safety information for your product: make sure that you read and understand all safety information in the manual entitled 'Safety Guide' ...
15F Jinbao Building No... 89 Jinbao Street, Dongcheng District, Beijing 100005, China
If you want to find out how the High Capacity Stacker-G1 Canon works, you can view and download the Canon High Capacity Stacker-G1 Safety Guide on the Manualsnet website.
Yes, we have the Safety Guide for Canon High Capacity Stacker-G1 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Safety Guide should include all the details that are needed to use a Canon High Capacity Stacker-G1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Canon High Capacity Stacker-G1 Safety Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Canon High Capacity Stacker-G1 Safety Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Canon High Capacity Stacker-G1 Safety Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Canon High Capacity Stacker-G1 Safety Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon High Capacity Stacker-G1 Safety Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.