Contents

Canon High Capacity Stacker-F1 Safety Guide PDF

1 of 20
1 of 20

Summary of Content for Canon High Capacity Stacker-F1 Safety Guide PDF

High Capacity Stacker-F1/G1/H1

Safety guide

Copyright 2015, Oc

All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Oc.

Oc makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

Further, Oc reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes.

Edition 2015-02 GB

Contents

Chapter 1 Safety information..............................................................................................................5

Safety information (all countries)................................................................................................................... 6

Chapter 2 Regulation notices............................................................................................................ 11

Regulation notices..........................................................................................................................................12

Chapter 3 General information......................................................................................................... 15

General information....................................................................................................................................... 16

Chapter 4 Miscellaneous....................................................................................................................17

Online support for your product................................................................................................................... 18

Contents

3

Contents

4

Chapter 1 Safety information

Safety information (all countries)

Introduction

All the products have been tested in accordance with the strictest international safety standards. Please read the following sections before you connect the machine to the power supply. These sections contain important information with regard to the user safety and the prevention of equipment problems. Make sure that you observe the safety rules hereinafter. This helps to assure that you can work with the product/system safely. Make sure that you observe all the precautions mentioned below.

NOTE Safety Regulations require the products name to be registered. In some regions where this product is sold the following commercial name(s) may be registered as a model number in ( ) instead. Canon High Capacity Stacker-F1 (Oc 01052) Canon High Capacity Stacker-G1 (Oc 01052) Canon High Capacity Stacker-H1 (Oc 01052)

Depending on the context, the terms; system, machine, and equipment used in the user documentation means the product for which this user documentation is applicable. Some parts of the contents of this section may not be applicable to your product. Please refer to the corresponding Safety Data Sheets for specific safety information. You can download the Safety Data Sheets from the support site of your product at "http:// downloads.oce.com/".

Warning and caution indicators (manual)

The following indicators are used in the manuals to categorize the level of the seriousness of hazard:

WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.

CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions.

IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property.

NOTE Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended.

NOTICE: Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the described operations

Safety information (all countries)

6 Chapter 1 - Safety information

Warning and caution indicators (machine)

The following indicators are used in the machine to warn the user for possible safety risks:

WARNING Whenever this label is applied on parts of the machine that are accessible to the user, a remark can be found in the user documentation, explaining the potential hazard for which the user is warned or cautioned. The user is urged to consult the user documentation in order to understand the safety-risk and learn how to avoid damage or injury.

CAUTION Ignoring this "Caution Hot" symbol could cause injury to skin; see also section "Actions in response to troubles".

Persons

Instructed person This safety manual describes safeguards for the protection of an instructed person. Instructed person is a term applied to persons who have been instructed and trained by a skilled person, or who are supervised by a skilled person, to identify energy sources that may cause pain and to take precautions to avoid unintentional contact with or exposure to those energy sources.

Disassemble and modification

WARNING Do not remove covers and panels which are fixed to the machine. Some machines have a

high-voltage component or a laser beam source inside that could cause an electrical shock or blindness.

Do not modify this machine, because this could cause a fire, electrical shock or breakdown. If the machine contains a laser, the laser beam source could cause blindness.

To avoid any risk, only properly qualified and trained service technicians are allowed to modify the machine.

Do not bridge or disable any safety interlock devices.

IMPORTANT Do not bridge any mechanical or electrical circuit breakers.

Power cord

WARNING Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other damage

to the power cord. The use of a damaged power cord (exposed core wire, broken wire, for example) could result in a fire or breakdown. If you find any of these conditions, immediately turn OFF the power switch and unplug the power cord from the power outlet. Then call your authorised service representative.

Only use the mains connector cable that was supplied with the machine. Do not use any power cable other than the one provided. Never use the power cable with

any other electrical device.

Safety information (all countries)

Chapter 1 - Safety information 7

Power source

WARNING Put the power plug directly into a wall socket that has the same configuration as the plug.

The use of an adapter leads can result in an inadequate power supply. If a proper wall outlet is not available, ask a qualified electrician to carry out the installation.

Do not use a multiple outlet adapter or an extension lead. Contact your authorised service representative if an extension lead is required. The use of an extension cord may result in fire or electrical shock.

IMPORTANT Do not connect the machine to a mains voltage that differs from the value as stated on the

power marking label.

NOTE If connection to a different mains voltage is required, contact your authorised service

representative.

Power plug

WARNING For machines that are connected via a wall socket: Place the machine close to a wall socket

that is easily accessible. The power plug is intended to serve as a disconnect device.

Grounding

WARNING Connect the power cord to an electrical outlet (wall socket) that is equipped with a

grounding terminal. This equipment has not been designed for connection to an IT power system. An IT power

system is a voltage network in which the neutral wire is not connected to earth.

Installation

WARNING Make sure that the machine is placed on a level, horizontal surface of sufficient strength. Do not place this machine on an unstable or tilted surface. Do not place this machine in a location that is subject to lots of vibrations and shocks. Do not use flammable sprays, liquids or gases near this product, because this could cause a

fire.

Safety information (all countries)

8 Chapter 1 - Safety information

Actions in response to troubles

WARNING When a piece of metal, water or any other similar foreign matter gets inside the machine,

immediately turn OFF the power switch and unplug the power cord from the power outlet. Then call your authorised service representative.

Immediately stop using the machine if the machine becomes excessively hot, emits smoke, or produces unusual odours or noises. Immediately turn OFF the power switch and unplug the power cord from the power outlet. Then call your authorised service representative.

Stop using the machine if the machine was dropped or a cover was damaged. Immediately turn OFF the power switch and unplug the power cord from the power outlet. Then call your authorised service representative.

Consumables, supplies and maintenance materials

IMPORTANT Do not place any liquids on the machine.

Moving the machine

WARNING Make sure that you disconnect the power cord and other cables before you move the

machine. Make sure that you check the documentation for the correct machine location before you

move the machine. Make sure that whenever the machine is moved, this is done by properly qualified people

who have received adequate instructions.

General use

WARNING Do not lean, lie or stand on any part of the machine, including any unit that can be pulled

outward (e.g. paper drawers).

IMPORTANT Unplug the product when you will not use the product for a long period of time.

Safety information (all countries)

Chapter 1 - Safety information 9

Safety information (all countries)

10 Chapter 1 - Safety information

Chapter 2 Regulation notices

Regulation notices

Grounding (Finland; FI, Norway; NO, Sweden; SE and Denmark; DK)

FI: Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. NO: Apparatet m tilkoples jordet stikkontact. SE: Apparaten skall anslutas till jordat uttag. DK: Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til

stikproppens jord.

Translation: The machine must be connected to a grounded power outlet.

Radio Interference suppression (all countries except USA)

Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

FCC approval (USA)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate, radio frequency energy and, if not installed and used in accordance with the Operator's Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If you make such changes or modifications, you could be required to stop operation of the equipment .

ICES-003; Interference-causing equipment (Canada)

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe A est conforme la norme NMB-003 du Canada.

VCCI (Japan)

Class A ITE

Translation: This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur, in which case the user may be required to take corrective actions.

Regulation notices

12 Chapter 2 - Regulation notices

EAC (Russia, Kazakhstan and Belarus)

The following information about this product can be found on the rear side of the machine: Model number Mains specifications Manufacturer Country of origin Production date EAC Marking

End of Life; WEEE (EEA and Switzerland)

This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit "http://www.canon-europe.com/environment". Reference: Directive 2012/19/EU.

End of Life; WEEE (India)

This product is not to be disposed of with your household waste, according to the e-waste (Management and Handling) Rules, 2011. This product should be handed over to a designated collection point, e.g., to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For

Regulation notices

Chapter 2 - Regulation notices 13

more information regarding return and recycling of WEEE products, please visit " http:// www.canon.co.in/environment". Also, this product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 % by weight and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule II of the Rule.

RoHS (China)

The Environmental Protection Use Period (EPUP) applicable for the printing system designated for deliveries to the Peoples Republic of China is 20 years. This EPUP, which does not include consumables or expendables, does not affect any warranty that is provided for the system and may not be construed or interpreted as a separate guarantee for the printing system.

20

RoHS (Vietnam)

Canon and Oc brand products sold in Vietnam market comply with following Circular and Decision -"Circular No.30/1011/TT-BCT dated August 10,2011 of the Ministry of Industry and Trade stipulating temporarily the permissible content limitation of some toxic chemicals in the electronic, electrical products" -Decision No.4693/QD-BCT correcting Circular 30/2011/TT-BCT For the statement on Canon Marketing Vietnam website, please see the last paragraph on the web page of the following URL: "http://www.canon.com.vn/personal/web/company/about/csr? languageCode".

Recycled paper (all countries)

The use of recycled paper also benefits the environment. The High Capacity Stacker-F1/G1/H1 is designed to use recycled paper, including chlorine free paper, which complies with the requirements of EN12281:2002.

Regulation notices

14 Chapter 2 - Regulation notices

Chapter 3 General information

General information

Caution labels and notations (all countries)

You can find the power-marking label near the mains entrance. If connection to a different mains voltage is required, contact Customer Service.

Do not remove caution labels or caution notations. If a label or notation is soiled, please clean the label or notation. If you cannot make label or notation legible, or if the label or notation is damaged, please contact your service representative.

Space requirements and operation precautions (all countries)

The required operating space of this product will be communicated to each customer by the local sales representative during the Site Survey.

Please refer to the corresponding Safety Data Sheets for specific safety information, including the dimensions of the product, the recommended room volume and ventilation rate. You can download the Safety Data Sheets from the support site of your product at "http:// global.oce.com/support/".

Operating environment (all countries)

The environmental requirements for correct operation of the machine are as follows: Operating temperature (T): 17 C (62.6 F) - 34 C (93.2 F) Relative Humidity (RH): 20% - 80%

Deployment area: below 2000m altitude and non tropical (China):

Translation: Can only be safely used lower than 2,000 metres altitude.

Translation: Can only be safely used in non tropical weather.

General information

16 Chapter 3 - General information

Chapter 4 Miscellaneous

Online support for your product

Downloads

User guides, printer drivers and other resources can change without prior notice. To stay up-to- date, you are advised to download the latest resources from:

"http://downloads.oce.com"

Before you use your product, you must always download the latest safety information for your product: make sure that you read and understand all safety information in the manual entitled 'Safety Guide' .

Support

For support information please contact your Canon local representative.

Find your local contact for support from:

"http://www.canon.com/support/"

Online support for your product

18 Chapter 4 - Miscellaneous

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON U.S.A., INC.

One Canon Park, Melville, NY 11747, U.S.A.

CANON CANADA INC.

6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

CANON LATIN AMERICA, INC.

703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.

CANON CHINA CO., LTD

15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China

CANON SINGAPORE PTE. LTD.

1 HarbourFront Avenue #04-01 Keppel Bay Tower, Singapore 098632

CANON HONGKONG CO., LTD

19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong

CANON AUSTRALIA PTY. LTD

1 Thomas Holt Drive, North Ryde, Sydney, N.S.W. 2113,

Manualsnet FAQs

If you want to find out how the High Capacity Stacker-F1 Canon works, you can view and download the Canon High Capacity Stacker-F1 Safety Guide on the Manualsnet website.

Yes, we have the Safety Guide for Canon High Capacity Stacker-F1 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Safety Guide should include all the details that are needed to use a Canon High Capacity Stacker-F1. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon High Capacity Stacker-F1 Safety Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon High Capacity Stacker-F1 Safety Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon High Capacity Stacker-F1 Safety Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon High Capacity Stacker-F1 Safety Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon High Capacity Stacker-F1 Safety Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.