Contents

Canon LV-7385 User's Manual PDF

1 of 96
1 of 96

Summary of Content for Canon LV-7385 User's Manual PDF

MULTIMEDIA PROJECTOR

LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215 Users Manual

The projectors model name is of two types, with or without suffix (E) at its end. The model names are referred to as LV-7385, LV-7380, LV-7285, LV-7280, LV-8310, and LV-8215 respectively throughout the users manual excluding some of the specifications pages. ENG

i

Important Information Safety Cautions Precautions Please read this manual carefully before using your Canon LV-7385/LV-7380/LV-7285/LV-7280/LV-8310/LV-8215 pro- jector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here:

CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be eas- ily accessible.

CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNITS PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED SERVICE PERSONNEL.

Machine Noise Information Regulation - 3. GPSGV, The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

CAUTION Avoid displaying stationary images for a prolonged period of time.

Doing so can result in these images being temporarily sustained on the surface of the LCD panel.

If this should happen, continue to use your projector. The static background from previous images will disappear.

CAUTION Do not put the projector on its side when the lamp is turned on.

Doing so may cause damage to the projector.

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of Califor- nia to cause birth defects or other reproductive harm. Wash hands after handling.

ii

Important Information

Federal Communication Commission Notice Multimedia Projector, Model : LV-7385, LV-7380, LV-7285, LV-7280, LV-8310, and LV-8215 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the projector must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516)328-5600

Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003.

Rglementation canadienne sur les intrferences radio Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

European Union (and EEA) only. These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and/or your national laws implementing those Directives. If a chemical symbol is printed beneath the symbol shown above, in accordance with the Bat- tery Directive, this indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an applicable threshold speci- fied in the Battery Directive. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and batteries and accumulators. Im- proper handling of this type of waste could have a possible impact on the environment and hu- man health due to potentially hazardous substances that are generally associated with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein)

iii

Important Information

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure mercury lamp which must be handled carefully and properly as mentioned below.

Alampmayexplodewithaloudsoundorburnoutduetoashock,scratch,orexpirationoflifetime.

Thelamplifemaydifferfromlamptolampandaccordingtotheenvironmentofuse.Thereisnotguarantee of the same lifetime for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

Alampgraduallybecomesdarkerwithtimeofuse.

Iftheprojectorindicatesthatthelampshouldbereplaced(i.e.,theLAMPindicatorblinksredrapidly),chanc- es of explosion become higher. Replace the lamp with a new one immediately.

Alwayskeepyourfaceawayfromtheexhaustventsothatyoudonotsufferfromthegasandbrokenshards of the lamp.

IF A LAMP EXPLODES If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come out of the exhaust vent. The gas contains toxic mercury. Open windows and doors for ventilation. If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor immediately. If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representa- tive to clean and check the inside of the projector and replace the lamp.

DISPOSAL OF WASTE LAMP Dispose of the mercury lamp of the projector according to the local regulation just like the fluores- cent lamp.

Lamp Replacement Toreplacethelamp,followallinstructionsprovidedonpage71, 72, 73.

Besuretoreplacethelampwhenthemessage[Replace with the new lamp.] appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your dealer for lamp replacement.

CAUTION When removing the lamp from a ceiling-mounted projector, make sure that no one is under the pro- jector. Glass fragments could fall if the lamp has been burned out.

NOTE FOR CUSTOMERS IN THE US Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECY- CLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

iv

Important Information

10

For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation Donotplacetheprojectorinthefollowingconditions:

- on an unstable cart, stand, or table. - near water, baths or damp rooms. - in direct sunlight, near heaters or heat radiating appliances. - in a dusty, smoky or steamy environment. - on a sheet of paper or cloth, rugs or carpets.

Ifyouwishtohavetheprojectorinstalledontheceiling: - Do not attempt to install the projector yourself. - The projector must be installed by qualified technicians in order to ensure proper operation and reduce

the risk of bodily injury. - In addition, the ceiling must be strong enough to support the projector and the installation must be in ac-

cordance with any local building codes. - Please consult your dealer for more information.

Do Not Use in the Following Environments Do not install the projector in a humid or dusty place or a place where there is much oily smoke or cigarette smoke. Optical parts such as a lens and mirror are stained, resulting in poor picture. Do not use the projector in a place where the temperature becomes very high or low.

Operating temperature: +5C to +40C Storage temperature: -10C to +50C (Quiet mode selected automatically at 95F to 104F / 35C to 40C)

Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

Fire and Shock Precautions Ensurethatthereissufficientventilationandthatventsareunobstructedtopreventthebuild-upofheatin-

side projector. Allow at least 1 m (3.3') of space between your projector and a wall.

Preventforeignobjectssuchaspaperclipsandbitsofpaperfromfallingintoyourprojector.Donotattempt retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

Donotplaceanyobjectsontopoftheprojector.

Donottouchthepowerplugduringathunderstorm.Doingsocancauseelectricalshockorfire.

Theprojectorisdesignedtooperateonpowersourcevoltagesindicatedontheratinglabelontheprojector. Ensure that your power fits this requirement before attempting to use your projector.

Donotlookintothelenswhiletheprojectorison.Seriousdamagetoyoureyescouldresult.

v

Important Information

Keepany itemssuchasmagnifyingglassoutof the lightpathof theprojector.The lightbeingprojected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.

Donotcoverthelenswiththeblacklenscoverorequivalentwhiletheprojectorison.Doingsocanleadto melting the cap and possibly burning your hands due to the heat emitted from the light output.

Donotplaceanyobjects,whichareeasilyaffectedbyheat,infrontoftheprojectorlensoraprojectorexhaust

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the output and exhaust.

Handlethepowercordcarefully.Adamagedorfrayedpowercordcancauseelectricshockorfire.

- Do not use any power cords than the supplied one.

- Do not bend or tug the power cord excessively.

- Do not place the power cord under the projector, or any heavy object.

- Do not cover the power cord with other soft materials such as rugs.

- Do not heat the power cord

- Do not handle the power plug with wet hands.

Turnofftheprojector,unplugthepowercordandhavetheprojectorservicedbyaqualifiedserviceperson- nel under the following conditions:

- When the power cord or plug is damaged or frayed.

- If liquid has been spilled into the projector, or if it has been exposed to rain or water.

- If the projector does not operate normally when you follow the instructions described in this user's manual.

- If the projector has been dropped or the cabinet has been damaged.

- If the projector exhibits a distinct change in performance, indicating a need for service.

Disconnectthepowercordandanyothercablesbeforecarryingtheprojector

Turnofftheprojectorandunplugthepowercordbeforecleaningthecabinetorreplacingthelamp.

Turnofftheprojectorandunplugthepowercordiftheprojectorisnottobeusedforanextendedperiodof time.

WhenusingaLANcable: For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

CAUTION Donottrytotouchtheventilationoutletontheleftside(whenseenfromthefront)asitcanbecomeheated

while the projector is turned on.

Donotusethetilt-foot forpurposesother thanoriginally intended.Misusessuchasgrippingthetilt-footor hanging on the wall can cause damage to the projector.

Select[High]inFanmodeifyoucontinuetousetheprojectorforconsecutivedays.(Fromthemenu,select [Setup][Options(1)][Fanmode][High].)FannoiseincreasesnoticeablyinHighmode.Seepage63.

DonotturnofftheACpowerfor60secondsafterthelampisturnedonandwhilethePOWERindicatoris blinking green. Doing so could cause premature lamp failure.

Donotholdthelenspartwhencarryingtheprojector. Doing so could cause the focus ring to rotate, resulting in accidental dropping of the projector.

vi

Important Information

CARRYING/TRANSPORTING THE PROJECTOR This projector is a precision machine. Do not give a strong shock to the projector or turn it down. Thoroughly read "Use Caution When Carrying or Transporting the Projector" below and install the lens cover before carrying the projector. When transporting the projector by train or airplane, use a highly crashworthy transport case.

Use Caution When Carrying or Transporting the Projector The carrying bag is intended for protection from dust and scratches on the surface of the cabinet, and it is not de- signed to protect the projector from external shocks. When carrying the projector with it put in the carrying bag, do not give a shock to it, drop it, or place anything on it. Do not transport the projector through a courier or transport service with the carrying bag. The projector can dam- age.

Remote Control Precautions Handletheremotecontrolcarefully.

Iftheremotecontrolgetswet,wipeitdryimmediately.

Avoidexcessiveheatandhumidity.

Donotheat,takeapart,orthrowbatteriesintofire.

Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.

Ensurethatyouhavethebatteries'polarity(+/-)alignedcorrectly.

Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.

Disposeofusedbatteriesaccordingtoyourlocalregulations.

About [High altitude] mode Set[Fanmode]to[Highaltitude]whenusingtheprojectorataltitudesapproximately5500feet/1600metersor

higher. See page 63. Usingtheprojectorataltitudesapproximately5500feet/1600metersorhigherwithoutsettingto[Highaltitude]

can cause the projector to overheat and the protector could shut down. Furthermore, the projector could not turn on due to the increased temperature of the lamp after power off. If these happen, wait a couple minutes and turn on the projector.

Fannoiseincreasesnoticeablyin[Highaltitude].Seepage63. Usingtheprojectorataltitudeslessthanapproximately5500feet/1600metersandsettingto[Highaltitude]can causethelamptoovercool,causingtheimagetoflicker.Switch[Fanmode]to[Auto].

Using theprojectorataltitudesapproximately5500 feet/1600metersorhighercanshorten the lifeofoptical components such as the lamp.

About Copyright of original projected pictures: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the fol- lowing functions may raise concern about the infringement of copyrights which are protected by copyright law. [Aspect],[Keystoneadjustment],Magnifying(D.ZOOM)featureandothersimilarfeatures.

vii

Table of Contents Important Information .......................................................................................... i

1. Introduction ......................................................................................................... 1 Whats in the Box? ........................................................................................................ 1

Introduction to the Projector .......................................................................................... 2 Congratulations on Your Purchase of The Projector ................................................ 2 Features youll enjoy: ............................................................................................... 2 About this users manual ......................................................................................... 3 Comparative Table of Main Features ....................................................................... 3

Part Names of the Projector .......................................................................................... 4 Front/Top ................................................................................................................. 4 Rear ......................................................................................................................... 4 Top Features ............................................................................................................ 5 Terminal Panel Features .......................................................................................... 6

Part Names of the Remote Control ............................................................................... 7 Battery Installation ................................................................................................... 9 Remote Control Precautions .................................................................................... 9 Operating Range for Wireless Remote Control........................................................ 9

2. Installation and Connections................................................................... 10 Setting Up the Screen and the Projector ......................................................................11

Selecting a Location (LV-7385/LV-7380/LV-7285/LV-7280) .....................................11 Throw Distance and Screen Size ...........................................................................11 Selecting a Location (LV-8310/LV-8215) ................................................................ 12 Throw Distance and Screen Size .......................................................................... 12

Making Connections ................................................................................................... 14 Enabling the computers external display .............................................................. 14 Connecting Your PC or Macintosh Computer ........................................................ 14 When Viewing a DVI Digital Signal ........................................................................ 16 Connecting an External Monitor ............................................................................ 18 Connecting Your Audio-Video Equipment with Component Output ....................... 19 Connecting Your Audio-Video Equipment with Video/S-Video Output ................... 20 Connecting a Digital Video Signal ......................................................................... 21 Connecting to a Network ....................................................................................... 22 Connecting the Supplied Power Cord .................................................................... 23

3. Projecting an Image (Basic Operation) ...................................................................... 24 Turning on the Projector .............................................................................................. 24

Selecting a Source ...................................................................................................... 26

Adjusting the Picture Size and Position ....................................................................... 28

Correcting Keystone Distortion .................................................................................... 31

Automatically Optimizing on RGB Image .................................................................... 34

Turning Up or Down Volume ........................................................................................ 34

Turning off the Projector .............................................................................................. 35

After Use ..................................................................................................................... 36

viii

Table of Contents

4. Convenient Features .................................................................................... 37 Turning off the Image and Sound ................................................................................ 37

Freezing a Picture ....................................................................................................... 37

Enlarging a Picture ...................................................................................................... 37

Lamp Mode and Energy-Saving Effect ........................................................................ 38

PreventingtheUnauthorizedUseoftheProjector[Password] .................................... 40

Network and Alert Mail Settings by Using an HTTP Browser ..................................... 43

5. Using On-Screen Menu ............................................................................... 47 Using the Menus ......................................................................................................... 47

Menu Elements ........................................................................................................... 48

List of Menu Items ....................................................................................................... 49

4MenuDescriptions&Functions[Input] ....................................................................... 51

MenuDescriptions&Functions[Adjustment] ............................................................. 52

MenuDescriptions&Functions[Setup] ...................................................................... 59

MenuDescriptions&Functions[Information] ............................................................. 66

MenuDescriptions&Functions[Reset] ...................................................................... 68

6. Maintenance ...................................................................................................... 69 Cleaning or Replacing the Filter .................................................................................. 69

Cleaning the Cabinet and the Lens ............................................................................. 70

Replacing the Lamp .................................................................................................... 71

7. Appendix ...............................................................................................................74 Troubleshooting ............................................................................................................74

Specifications .............................................................................................................. 77

Cabinet Dimensions .................................................................................................... 79

Pin Assignments of D-Sub ANALOG IN-1 Input Connector ........................................ 80

Compatible Input Signal List ....................................................................................... 81

Relationship between Screen Size and Projection distance ....................................... 82

PC Control Codes and Cable Connection ................................................................... 84

Troubleshooting Check List ......................................................................................... 85

1

What's in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector.

Projector

lens cover

aC power cord Vga cable [7n520077]

soft case

QuickStartGuide

Important Information

Cd-rOM Users manual

Quick start guide important information

1. Introduction

remote control Batteries (aaa2)

dVi to Vga adapter

Warranty

2

1. Introduction

Introduction to the Projector This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of The Projector The LV-7385/LV-7380/LV-7285/LV-7280/LV-8310/LV-8215 is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), or audio-video equipment. You can use the projector on a tabletop or cart, from behind a screen, or permanently mounted on a ceiling*1. The remote control can be used wirelessly.

*1 Do not attempt to mount the projector on a ceiling yourself.

The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

In addition, the ceiling must be strong enough to support the projector and the installation must be in accor- dance with any local building codes. Please consult your dealer for more information.

Features you'll enjoy: QuickStart,QuickPowerOff,DirectPowerOff Less than 4 seconds* after turning on the power, the projector is ready to display PC or video images. The pro-

jector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. * Thequickstarttimeisonlywhen[Standbymode]issetto[Normal]intheon-screenmessage.

The projector has a feature called Direct Power Off. This feature allows the projector to be turned off (even when projecting an image). See page 35.

CarbonMeter This feature will show energy-saving effect in terms of CO2emissionreduction(kg)whentheprojectors[Lamp

mode]issetto[Quietmode].TheamountofCO2 emission reduction will be displayed in the confirmation mes- sage at the time of power-off and in the Information of the on-screen menu.

Lessthan1Winstandbyconditionwithenergysavingtechnology Selecting[Power-saving]for[Standbymode]fromthemenucanputtheprojectorinpower-savingmodethat

consumes less than 1W. Long-lifeLampemployed TheLong-lifelampprovides4000hoursofuseatthe[Normal]forLampmodeand5000hoursofuseatthe

[Quiet]forLampmode. DirectpoweronandPowerManagementfeatures The Direct power on (AC), Direct power on (Comp1), Power management, and Off timer features eliminate the

need to always use the POWER button on the remote control or projector cabinet. (For Direct power on (AC), Direct power on (Comp1), and Power management, see page 65; for Off timer, see

page 64.) Avarietyofinputportsandacomprehensivearrayofsystemcontrolinterfaces This projector supports input signals on the following ports: DVI-I connector (DVI-I 29 Pin) with HDCP compat-

ible, 15pin D-Sub, composite and S-video. 7Wbuilt-inspeakerforanintegratedaudiosolution Powerful 7 watt speaker provides volume need for large rooms. Autoverticalkeystonecorrection Auto Keystone feature allows the projector to detect its tilt and correct vertical distortion automatically. (page

31) SupportinguptoUXGAresolution High resolution display - up to UXGA compatible, XGA (LV-7385/LV-7380/LV-7285/LV-7280)/ WXGA (LV-8310/

LV-8215) native resolution. Fivepicturepresetmodesforuseradjustablepictureandcolorsettings Each picture preset mode can be customized and memorized according to your preference. (page 52) Preventingunauthorizeduseoftheprojector Enhanced smart security settings for password protection (page 40), cabinet key lock (page 62), and anti-theft

3

security cable lock (page 4) to help prevent unauthorized access, adjustments and theft deterrence. Notifyinganerrormessageviae-mailwhenusingwiredLAN The Alert Mail feature notifies your computer of an error message via e-mail when using wired LAN. The error

message will be notified when the projector lamp has reached the end of its usable life or an error occurs in the projector (page 45). You can configure the network settings of the projector on your computer. (page 43)

About this user's manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll find an overview. If the section doesn't apply, you can skip it.

IBMisatrademarkorregisteredtrademarkofInternationalBusinessMachinesCorporation.

Macintosh,MacOSXandPowerBookaretrademarksofAppleInc.registeredintheU.S.andothercountries.

Microsoft,Windows,andInternetExplorerareeitherregisteredtrademarksortrademarksofMicrosoftCorpo- ration in the United States and/or other countries.

MicroSaverisaregisteredtrademarkofKensingtonComputerProductsGroup,adivisionofACCOBrands.

Other product and companynamesmentioned in this usersmanualmaybe the trademarksor registered trademarks of their respective holders.

Comparative Table of Main Features The main features vary depending on the model name as follows.

Standard Models Wide Panel Models

LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215

Native Aspect Ratio ( page 77)

Standard Wide

Native Resolution (dots x lines) ( page 77) XGA (1024 x 768) WXGA (1280 x 800)

Screen Size (Mini. to Max) ( page 77) 21 - 300

Throw Distance ( page 77) 0.8 m to 11.3 m/31.5 to 444.9 0.8m to 11.95m/31.5 to 470.5

Lightoutputin[Normal]for[Lamp mode]( page 77) 3500 lumens 3000 lumens 2600 lumens 2200 lumens 3000 lumens 2600 lumens

Contrast Ratio ( page 77) 500: 1 2000: 1* 500: 1 450: 1

Wired LAN ( page 22, 43) RJ-45

Lamp Replacement Time (average) ( page 66) 4000(H)in[Normal]mode/5000(H)in[Quiet]mode

Replacement Lamp ( page 71) LV-LP31 LV-LP32 LV-LP31

*Thevalueismeasuredwhen[Autoiris]issetto[On].

For further details on the specifications, see page 77.

TIP: The model name is located on the cabinet.

1. Introduction

Model name

4

Part Names of the Projector

Zoom lever (see page 29)

Controls (see page 5)

lens

lens Cover

Be sure to remove the lens cover dur- ing projection. the cap can deform or fire can occur.

Built-in security slot ( )*

focus ring (see page 29)

adjustable tilt foot lock Button (see page 30)

adjustable tilt foot (see page 30)

remote sensor (see page 9)

Ventilation (inlet) / filter Cover (see page 69)

do not block this vent. troubles or fire can result.

Front/Top

aC input Connect the supplied power cords two-pin plug here, and plug the other end into an active wall outlet. (see page 23)

Main Power switch When you plug the supplied power cord into an active wall outlet and turn on the Main Power, the POWer indicator turns orange and the projector is in standby mode. (see page 24)

terminal Panel (see page 6) Monaural speaker (7W)

Rear

* This security slot supports the MicroSaver Security System.

Ventilation (outlet) heated air is exhausted from here.

do not block this vent. troubles or fire can result.

1. Introduction

lamp Cover (see page 72)

Carrying handle rear foot

spacer (black rubber) a spacer is provided for leveling the projector. to fine-adjust the height of the rear foot, remove the spacer and rotate the rear foot to the desired height.

Ventilation (inlet) / filter Cover (see page 69)

do not block this vent. troubles or fire can result.

5

1. Introduction

Top Features

3

4 1 5

8

92 106

7

1. POWER Button ( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. To turn on the projector, press and hold this button for about 1 second. To turn off the projector, press this button twice.

2. POWER Indicator When this indicator is green, the projector is on, when the projector is turned off (standby mode), this indica- torlightsorangewhen[Normal]isselectedfor[Standby mode];itlightsredwhen[Power-saving]isselectedfor [Standbymode].See thePOWER Indicatorsection on page 74 for more details.

3. STATUS Indicator If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or the projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet key while the Key lock is enabled. See the STATUS Indicator section on page 74 for more details.

4. LAMP Indicator If this light blinks red rapidly, it's warning you that the lamp has reached the end of its usable life. After this light appears, replace the lamp as soon as possible (See page 71). If this is lit green continually, it indicates that the lamp mode is set to Quiet. See the LAMP In- dicator section on page 74 for more details. This indicator lights green for about 90 seconds im- mediately after the projector is powered on.

5. INPUT Button Selecting from INPUT List Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change.

To display the selected source, press the OK button or allow 2 seconds to elapse.

Detecting the Signal Automatically Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. See page 26.

6. AUTO PC Button Use this button to adjust an analog RGB source for an optimal picture. See page 34.

7. MENU Button Displays the menu. See page 47.

8. / VOL (+/) / KEYSTONE ( ) Buttons : Use these buttons to select the menu of the

item you wish to adjust. See page 47. When no menus appear, these buttons work as a keystone control. See page 32.

: Use these buttons to change the level of a selected menu item. A press of the but- ton executes the selection. When no menus appear, these buttons work as a volume control. See page 34.

9. OK Button Executes your menu selection and activates items selected from the menu.

10. BACK Button Pressing this button will return to the previous menu. While you are in the main menu, pressing this but- ton will close the menu.

6

1. Introduction

3378 12

46 5 109

Terminal Panel Features

1. Computer 1 Input Connector [ANALOG IN-1] (Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equip- ment such as IBM compatible or Macintosh com- puters. Use the supplied VGA cable to connect to your computer. This also serves as a component input connector that allows you to connect a com- ponent video output of audio-video equipment. See page 14, 17, 19.

2. Computer 2 Input Connector [DIGITAL IN/ANA- LOG IN-2] (DVI-I 29 Pin) Connect the DVI output of your computer or other digital RGB equipment such as IBM compatible or Macintosh computers. You can also use the supplied DVI to VGA adapter to connect the output of analog RGB equipment. See page 16, 17, 21.

3. AUDIO IN Mini Jack (Stereo Mini) This is where you connect the audio output from your computer or audio-video equipment when con- nected to the ANALOG IN-1 or 2 input. A commer- cially available audio cable is required. See page 14, 16, 18, 19, 21.

4. MONITOR OUT Connector [ ] (Mini D-Sub 15 Pin) You can use this connector to loop your computer im- age to an external monitor from the RGB input source (ANALOG IN-1). This connector outputs RGB signal in standby mode. See page 18.

5. AUDIO OUT Mini Jack (Stereo Mini) You can use this jack to output sound to your audio- video equipment from the currently selected source. Output sound level can be adjusted in accordance with the sound level of the internal speaker.

Note that this cannot be used as a headphone jack. (When audio equipment is connected, the projector speaker is disabled.) When a cable mini-plug is inserted into this jack, both the right and left audio signals are not mixed, but separate. For example, when a cable mini-plug is inserted into the left AUDIO IN jack only, only left sound is output.

6. VIDEO IN Connector (RCA) Connect audio-video equipment here to project video. See page 20.

7. S-VIDEO IN Connector (Mini DIN 4 Pin) Here is where you connect the S-Video input from audio-video equipment. See page 20.

NOTE: S-Video provides more vivid color and higher reso- lution than the traditional composite video format.

8. AUDIO IN Jacks L/R (RCA)

These are your left and right channel audio inputs for stereo sound from a Video/S-Video source. See page 20, 21.

9. SERVICE PORT (D-Sub 9 Pin) Use this port to connect a computer or control sys- tem. This enables you to control the projector using se- rial communication protocol. If you are writing your own program, typical PC control codes are on page 84.

10. LAN Port [ ] (RJ-45) Use this port when controlling your projector in LAN connection from a computer. Use a commercially available LAN cable (10 Base-T/100 Base-T) to con- nect the projector to the computer. See page 22.

7

1. Introduction

Part Names of the Remote Control

1. Infrared Transmitter Direct the remote control toward the remote sensor

on the projector cabinet.

2. POWER Button When the main power is on, you can use this button

to turn your projector on.

NOTE: To turn on the projector, press and hold the POWER button for about 1 second.

You can use this button to turn your projector off.

NOTE: To turn off the projector, press this button twice.

3. INFO. Button Provides the information on the current signal and

projector settings. See page 66.

4. IMAGE Button Press this button to display the Image adjustment

menu to adjust Image mode, Contrast, Brightness, Sharpness, Color level and Color balance. See pages 52 to 53.

POWER

INPUTIMAGE

ASPECT

INFO.

BLANK

AUTO PC

VOL

FREEZE

RD-439E

D.ZOOM

BACK

MENU

1

2

4 6

7 8

3

5

11

13

12

14

15

9 10

5. INPUT Button Selecting from INPUT List

Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change.

Detecting the Signal Automatically Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source.

See page 26.

6. AUTO PC Button Use this button to adjust an analog RGB source for

an optimal picture. See page 34.

7. ASPECT Button Press this button once to display the Aspect select

menu. Keep pressing will change aspect ratios. See page 56.

8. BLANK Button This button turns off the image and sound for a

short period of time. Press again to restore the im- age and sound. See page 37.

9. MENU Button Displays the menu for various settings and adjust-

ments. See page 47.

10. Button See page 47.

: Use these buttons to select the menu of the item you wish to adjust.

: Use these buttons to change the level of a selected menu item. A press of the button executes the selection.

When an image is magnified, the button moves the image. See page 37.

11. OK Button Use this button to enter your menu selection. It

works the same way as the OK button on the cabi- net. See page 5.

8

POWER

INPUTIMAGE

ASPECT

INFO.

BLANK

AUTO PC

VOL

FREEZE

RD-439E

D.ZOOM

BACK

MENU

1

2

4 6

7 8

3

5

11

13

12

14

15

9 10

1. Introduction

12. BACK Button It works the same way as the BACK button on the

cabinet. See page 5.

13. VOL (+) () Button Press (+) to increase the volume and () to de-

crease it. See page 34.

14. D. ZOOM (+) () Button Use this button to adjust the image size up to

400%. The image is magnified about the center of the

screen. See page 37.

15. FREEZE Button This button will freeze a picture. Press again to re-

sume motion. See page 37.

9

1. Introduction

Remote Control Precautions Handletheremotecontrolcarefully. Iftheremotecontrolgetswet,wipeitdryimmediately. Avoidexcessiveheatandhumidity. Donotheat,takeapart,orthrowbatteriesintofire. Ensurethatyouhavethebatteries'polarity(+/-)alignedcorrectly. Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries. Donotplacethebatteriesupsidedown. Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether. Disposeofusedbatteriesaccordingtoyourlocalregulations.

Operating Range for Wireless Remote Control

Battery Installation

1 Press firmly and slide the battery cover off.

2 Remove both old batteries and install new ones (AAA). Ensure that you have the batteries' po- larity (+/) aligned correctly.

3 Slip the cover back over the bat- teries until it snaps into place. Do not mix different types of batter- ies or new and old batteries.

remote sensor on projector cabinet

7m/22 feet

The infraredsignaloperatesby line-of-sightup toadistanceofabout7m (22 feet)andwithina60-degree angle of the remote sensor on the projector cabinet.

Theprojectorwillnotrespondifthereareobjectsbetweentheremotecontrolandthesensor,orifstronglight falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

30

remote control

remote sensor on projector cabinet

7m/22 feet

30

30

30

remote control

Horizontal range Vertical range

10

This section describes how to set up your projector and how to connect video and audio sources.

2. Installation and Connections

Your projector is simple to set up and use. But before you get started, you must first:

Set up a screen and the projector. See page 11, 12.

Connect your computer or audio-video equipment to the projector. See pages 14, 16, 17, 18, 19, 20, 21, 22.

Connect the supplied power cord. See page 23.

NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector. When moving the projec- tor or when it is not in use, cover the lens with the lens cover.

1

32

to the wall outlet.

11

2. Installation and Connections

Setting Up the Screen and the Projector Selecting a Location (LV-7385/LV-7380/LV-7285/LV-7280) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" measured diagonally when the projector is roughly 0.8 m (2.6') from the wall or screen. The largest the image can be is 300" when the projector is about 11.3 m (37.0') from the wall or screen. Use the draw- ing below as a guide.

Zoom(max.)

Zoom(min.)

Optional axis when image is projected at right angle to the screen.

Throw Distance and Screen Size

Screen

H1 and H2: H1 is the height of the screen from the intersection of optical axis and screen surface, and H2 is the height of the intersection when an image is projected at right angle to the screen.

Thesizesintheabovetablehavebeenobtainedassumingthattheaspectratiois4:3.Theymayvaryfromthe actual sizes depending on the type of the projected image.

Screen size (WH) cm

21" 4332

25" 5138

30" 6146

40" 8161

60" 12291

80" 163122

100" 203152

150" 305229

180" 366274

200" 406305

250" 508381

300" 610457

Projection distance

Zoom (max) 0.8 m

(2.6) 0.9 m (3.0)

1.2 m (3.9)

1.9 m (6.2)

2.5 m (8.2)

3.1 m (10.2)

4.7 m (15.4)

5.6 m (18.4)

6.2 m (20.3)

7.8 m (25.6)

9.4 m (30.8)

Projection distance

Zoom (min)

0.8 m (2.6)

0.9 m (3.0)

1.1 m (3.6)

1.5 m (4.9)

2.2 m (7.2)

3.0 m (9.8)

3.7 m (12.1)

5.6 m (18.4)

6.8 m (22.3)

7.5 m (24.6)

9.4 m (30.8)

11.3 m (37.1)

H1 27 cm (0.9)

32 cm (1.1)

39 cm (1.3)

51 cm (1.7)

77 cm (2.5)

103 cm (3.4)

129 cm (4.2)

193 cm (6.3)

231 cm (7.6)

257 cm (8.4)

321 cm (10.5)

386 cm (12.7)

H2 5 cm (0.2)

6 cm (0.2)

7 cm (0.2)

10 cm (0.3)

14 cm (0.5)

19 cm (0.6)

24 cm (0.8)

36 cm (1.2)

43 cm (1.4)

48 cm (1.6)

60 cm (2.0)

71 cm (2.3)

32"

40" 67"

80" 126"

150" 165"

200" 250"

300"

300"

1.2 m

2.5 m

4.7 m

6.2 m

9.4m(Zoommax.)

11.3m(Zoommin.)

H1

H2

12

2. Installation and Connections

Selecting a Location (LV-8310/LV-8215) The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" measured diagonally when the projector is roughly 0.8 m (2.6') from the wall or screen. The largest the image can be is 300" when the projector is about 12.0 m (39.0') from the wall or screen. Use the draw- ing below as a guide.

Optional axis when image is projected at right angle to the screen.

Throw Distance and Screen Size

Screen

H1 and H2: H1 is the height of the screen from the intersection of optical axis and screen surface, and H2 is the height of the intersection when an image is projected at right angle to the screen.

TIP: Fortherelationshipbetweenthescreensizeandprojectiondistance,seethetableonpage82, 83. Thesizesintheabovetablehavebeenobtainedassumingthattheaspectratiois16:9.Theymayvaryfromtheactualsizes

depending on the type of the projected image.

Screen size (W x H cm)

21 45 x 28

25 54 x 34

30 65 x 40

40 86 x 54

60 129 x 81

80 172 x 108

100 215 x 135

150 323 x 202

180 388 x 242

200 431 x 269

250 538 x 337

300 646 x 404

Projection distance

Zoom (max) 0.8 m

(2.6) 1.0 m (3.2)

1.3 m (4.2)

2.0 m (6.4)

2.6 m (8.6)

3.3 m (10.8)

5.0 m (16.3)

6.0 m (19.5)

6.6 m (21.7)

8.3 m (27.2)

9.9 m (32.6)

Projection distance

Zoom (min)

0.8 m (2.6)

1.0 m (3.2)

1.2 m (3.8)

1.6 m (5.1)

2.4 m (7.7)

3.2 m (10.4)

4.0 m (13.0)

6.0 m (19.5)

7.2 m (23.5)

8.0 m (26.1)

10.0 m (32.7)

12.0 m (39.2)

H1 26 cm (0.8)

31 cm (1.0)

37 cm (1.2)

49 cm (1.6)

74 cm (2.4)

98 cm (3.2)

123 cm (4.0)

184 cm (6.0)

221 cm (7.3)

246 cm (8.1)

307 cm (10.1)

369 cm (12.1)

H2 2 cm (0.1)

3 cm (0.1)

4 cm (0.1)

5 cm (0.2)

7 cm (0.2)

9 cm (0.3)

12 cm (0.4)

18 cm (0.6)

21 cm (0.7)

24 cm (0.8)

29 cm (1.0)

35 cm (1.2)

Zoom(max.)

Zoom(min.)

33"

40" 65"

80" 125"

150" 165"

200" 248"

300"

1.3 m

2.6 m

5.0 m

6.6 m

9.9m(Zoommax.)

12.0m(Zoommin.)

H1

H2

13

2. Installation and Connections

NOTE: TheZoomleveradjuststheimagesize(diagonal)+/-10%. Thisprojectorcanbehungfromtheceiling(Ceilingmounted)withitturnedupsidedown. Whenatranslucentscreenisused,theprojectorcanprojectanimagefrombehindthescreen(Rear). When the projector is hung from the ceiling or projector projects an image from behind the screen, the image must be inverted verticallyorhorizontally.Seepage62. Whenhangingtheprojectorfromtheceiling,optionalbrackets(partNo.LV-CL15)arerequired.

WARNING

Installingyourprojectorontheceilingmustbedonebyaqualifiedtechnician.Contactyourdealerformorein- formation.

Donotattempttoinstalltheprojectoryourself. Onlyuseyourprojectoronasolid,levelsurface.Iftheprojectorfallstotheground,youcanbeinjuredandthe

projector severely damaged. Donotusetheprojectorwheretemperaturesvarygreatly.Theprojectormustbeusedattemperaturesbetween

41F (5C) and 104F (40C). (Quiet mode selected automatically at 95F to 104F/35C to 40C). Donotexposetheprojectortomoisture,dust,orsmoke.Thiswillharmthescreenimage. Ensurethatyouhaveadequateventilationaroundyourprojectorsoheatcandissipate.Donotcoverthevents

on the side or the front of the projector.

Reflecting the Image

Using a mirror to reflect your projectors image enables you to enjoy a much larger image. Contact your dealer if you need a mirror system. If youre using a mirror system and your image is inverted, use the MENU and buttons on your projector cabinet or your remote control to correct the orientation. See page 62.

14

2. Installation and Connections

Making Connections NOTE:WhenusingwithanotebookPC,besure toconnect theprojectorandnotebookPCwhile theprojector is in standby modeandbeforeturningonthepowertothenotebookPC. InmostcasestheoutputsignalfromthenotebookPCisnotturnedonunlessconnectedtotheprojectorbeforebeingpowered up. * Ifthescreengoesblankwhileusingyourremotecontrol,itmaybetheresultofthecomputer'sscreen-saverorpowerman-

agement software.

Connecting Your PC or Macintosh Computer

Enabling the computers external display Displaying an image on the notebook PCs screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the Fn key along with one of the 12 function keys gets the external display to come on or off. For more details, refer to your computers owners manual.

NOTE: The ANALOG IN-1 and DIGITAL IN/ANALOG IN-2 connectors are supported by Plug & Play.

ANALOG IN-1

AUDIO IN

AUDIO IN DIGITAL IN/ ANALOG IN-2

PHONE

PHONE

iBM Vga or Compatibles (notebook type) or Macintosh (notebook type)

Vga cable (supplied) to mini d-sub 15-pin connector on the projector. it is recommended that you use a commercially available distribution am- plifier if connecting a signal cable longer than the cable supplied.

NOTE: For older Macintosh, use a commercially avail- able pin adapter (not supplied) to connect to your Macs video port.

stereo mini-plug audio cable (not supplied)

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote

control to select the appropriate input from the menu.

ANALOG IN-1 Computer 1

15

2. Installation and Connections

NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.

NOTE:An imagemaynotbedisplayedcorrectlywhenaVideoorS-Videosource isplayedbackviaacommerciallyavailable scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * Whenanimageisdisplayedwiththelowerandupperblackportionofthescreenoradarkimageisnotdisplayedcorrectly: ProjectanimagetofillthescreenandthenpresstheAUTOPCbuttonontheremotecontrolortheprojectorcabinet.

16

ANALOG IN-1

AUDIO IN

AUDIO IN DIGITAL IN/ ANALOG IN-2

PHONE

PHONE

2. Installation and Connections

When Viewing a DVI Digital Signal To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC. Do not disconnect the DVI cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image may not be correctly displayed. Should this happen, restart your PC.

NOTE: UseaDVIcableortheonecompliantwiththeDDWG(DigitalDisplayWorkingGroup)DVI(DigitalVisualInterface)revision1.0 standard.TheDVIcableshouldbewithin5m(196)long.BothsingleanddualtypesofDVIcablecanbeused.

TheDVI(DIGITAL)connectoracceptsVGA(640x480),SVGA(800x600),1152x864,XGA(1024x768),WXGA(1280x800@up to60Hz),andSXGA(1280x1024@upto60Hz).

stereo mini-plug audio cable (not supplied)

IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type)

DVI cable (not supplied)

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote control to select the appropriate input from the menu.

DIGITAL IN / ANALOG IN-2

Computer 2 (Digital)

17

ANALOG IN-1DIGITAL IN / ANALOG IN-2

2. Installation and Connections

Using Two Analog Computer Inputs Simultaneously

If you need to use two analog inputs simultaneously, connect a VGA cable as shown below.

NOTE:WhentheDVItoVGAadapterisnottobeusedforanextendedperiodoftime,removeitfromtheprojector.Failuretodo so may cause damage to the connector of the projector.

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote

control to select the appropriate input from the menu.

ANALOG IN-1 Computer 1

DIGITAL IN / ANALOG IN-2

Computer 2 (Analog)

iBM PC or Compatibles (desktop type) or Macintosh (desktop type)

iBM Vga or Compatibles (notebook type) or Macintosh (notebook type)

Vga cable (supplied)

dVi to Vga adapter (supplied)

Vga cable (not supplied)

18

2. Installation and Connections

Connecting an External Monitor

MONITOR OUT

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB ana- log image you're projecting.

NOTE:Daisychainconnectionisnotpossible.

NOTE: ThesignalfromtheDIGITALIN/ANALOGIN-2connectorcannotbeoutputfromtheMONITOROUTconnector. Whenaudioequipmentisconnected,theprojectorspeakerisdisabled. Useanaudiocablewithoutabuilt-inresistor.Usinganaudiocablewithabuilt-inresistorturnsdownthesound.

Vga cable (supplied)

Vga cable (not supplied)

stereo mini-plug audio cable (not supplied)

19

AUDIO IN L R

AUDIO OUT

L R

Component

Y Cb Cr

ANALOG IN-1 AUDIO IN

2. Installation and Connections

Acomponentsignalwillbeautomaticallydisplayed.Ifnot,fromthemenu,select[Setup][Options(1)][Input signalselect]or[Computer2(Analog)][Computer1],andthenselect[COMPONENT].

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote

control to select the appropriate input from the menu.

ANALOG IN-1 Computer 1

DIGITAL IN / ANALOG IN-2

Computer 2 (Analog)

NOTE:RefertoyourDVDplayersownersmanualformoreinformationaboutyourDVDplayersvideooutputrequirements.

Connecting Your Audio-Video Equipment with Component Output

Use audio equipment for stereo sound.

audio cable (not supplied)

Optional 15-pin - to - rCa (female) 3 cable (lV-Ca32)

Component video rCa3 cable (not supplied)

20

AUDIO IN L R AUDIO OUT

L R

VIDEO OUT S-VIDEOVIDEO

VIDEO IN

AUDIO IN S-VIDEO IN

2. Installation and Connections

Connecting Your Audio-Video Equipment with Video/S-Video Output

s-Video cable (not supplied)

Video cable (not supplied)

audio cable (not supplied)

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote

control to select the appropriate input from the menu.

VIDEO IN VIDEO

S-VIDEO IN S-VIDEO

NOTE:TheAUDIOINL/MONOandRjacks(RCA)aresharedbetweentheVideoandS-Videoinputs.

NOTE:Refer toyouraudio-videoequipment'sowner'smanual formore informationaboutyourequipment'svideooutput re- quirements.

NOTE:AnimagemaynotbedisplayedcorrectlywhenaVideoorS-Videosourceisplayedbackinfast-forwardorfast-rewindvia a scan converter.

21

2. Installation and Connections

Connecting a Digital Video Signal To project a source from audio video equipment with a digital video output such as an HDMI or DVI connector, use a commercially available HDMI-to-DVI cable or the optional DVI digital cable to connect the Computer 2 input [DIGITALIN/ANALOGIN-2]connectoroftheprojectorasshownbelow. To output the sound in stereo, connect to audio equipment.

AUDIO IN L R

AUDIO OUT L R

VIDEO OUT HDMI OUT S-VIDEO VIDEO

AUDIO OUT L R

VIDEO OUT S-VIDEO VIDEO

DVI OUT

DIGITAL IN/ ANALOG IN-2

AUDIO IN

audio cable (not supplied)

audio video equipment

dVi digital cable (Optional: lV-Ca29)

hdMi-to-dVi cable (not supplied)

dVi connector

hdMi connector

Selecttheinputnameforitsappropriateinputconnectorafterturningontheprojector.

Input connector Use the INPUT button on the projector cabinet or the remote control to select the appropriate input from the menu.

DIGITAL IN / ANALOG IN-2

Computer 2 (Digital)

NOTE:Animagemaynotbedisplayeddependingonthespecificationsoftheaudiovideoequipmentbeingused.

TIP:ForusersofaudiovideoequipmentwithanHDMIconnector: SelectEnhancedratherthanNormalifHDMIoutputisswitchablebetweenEnhancedandNormal. Thiswillprovideimprovedimagecontrastandmoredetaileddarkareas. Formoreinformationonsettings,refertotheinstructionmanualoftheaudiovideoequipmenttobeconnected.

22

LAN

2. Installation and Connections

Connecting to a Network The projector comes standard with a LAN port ( ) which provides a LAN connection using a LAN cable. Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN.TouseaLANconnection,youarerequiredtoassignanIPaddresstotheprojectoronthe[PROJECTOR NETWORKSETTINGS]screenofthewebbrowseronyourcomputer.Forsetting,seepage43, 44, 45, 46.

Example of wired LAN connection

server

hub

lan cable (not supplied)

NOTE:UseaCategory5orhigherLANcable.

23

2. Installation and Connections

Connecting the Supplied Power Cord Connect the supplied power cord to the projector. First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. When you press the Main Power switch to the On position (I), the projector will go into standby mode. When in standbymode,thePOWERindicatorwilllightorangeandtheSTATUSindicatorwilllightgreentoshowthat[Normal] modeisselectedfor[Standbymode].

Make sure that the prongs are fully inserted into both the aC in and the wall outlet.

to wall outlet

CAUTION: Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.

24

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen.

Turning on the Projector

NOTE: Theprojectorhastwopowerswitches:amainpowerswitchandaPOWER( )button. Whenplugginginorunpluggingthesuppliedpowercord,makesurethatthemainpowerswitchispushedtotheoff()po- sition.Failuretodosomaycausedamagetotheprojector.

1. To turn on the main power to the projector, press the Main Power switch to the on position ( I ).

Theprojectorwill go into standbymode.When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green to show that [Normal]modeisselectedfor[Standbymode].

3. Press the POWER ( ) button on the projector cabi- net or the POWER ( ) button on the remote control for about 1 second.

The STATUS indicator goes off and the POWER indica- tor starts blinking.

When the POWER indicator turns a steady green, and the projector is ready to use.

Less than 4 seconds* after turning on the power, the projector is ready to display PC or video images (Quick Start).Thequickstarttimeisonlywhen[Standbymode] issetto[Normal]intheon-screenmessage.

If the projector is turned off and is turned it back on quickly, it may take some time to start displaying an im- age. This is because the fans run for cooling purpose.

TIP: When the STATUS indicator lights orange, it means that the[Keylock]isturnedon.Seepage62.

Whenthemessage"Projectorislocked!Enteryourpassword." isdisplayed,itmeansthatthe[Password]isturnedon.See page 40.

After you turn on your projector, ensure that the com- puter or video source is turned on and that your lens cover is removed.

Standby Preparing to

power on Power On

Steady orange light

Blinking green light

Steady green light

See page 74 for more details.

2. Remove the lens cover.

25

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

3. Projecting an Image (Basic Operation)

Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 21 menu languages.

To select a menu language, follow these steps:

1. Use the or button to select one of the 21 languages for the menu.

2. Press the OK button to execute the selection.

After this has been done, you can proceed to the menu op- eration. If you want, you can select the menu language later. See [Language]onpages49 and 60.

NOTE:Immediatelyafterturningontheprojector,screenflickermayoccur.Thisisnormal.Wait3to5minutesuntilthelamp lightingisstabilized.

NOTE: If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans runs with- out displaying an image for some time and then the projector will display the image.

When the Lamp mode is set to Quiet, the LAMP indicator will light green. If one of the following things happens, the projector will not turn on.

Iftheinternaltemperatureoftheprojectoristoohigh,theprojectorwillnotturnontoprotecttheinternalsystem. Please wait for the projector's internal components to cool down.

Whenthelampreachesitsendofusablelife,theprojectorwillnotturnon.Ifthishappens,replacethelamp.

Ifthelampfailstolight,andiftheSTATUSindicatorflashesonandoffinacycleofsixtimes,waitafullminute and then turn on the power.

NOTE:TurningtheMainPowerSwitchOffthenBackOn Allowaminimumof1secondbetweenturningoffthemainpowerswitchandturningitbackonagain. Thesamewillbeappliedwhenapowerstripequippedwithaswitchandabreakerisused. Failingtodosocouldresultinnopowertotheprojector.(Therewillbenostand-byLED) Should this happen, unplug the power cord and plug it in again. Turn on the main power switch.

CAUTION: The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

26

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

3. Projecting an Image (Basic Operation)

Selecting a Source Selecting the computer or audio-video equipment

NOTE:Turnonthecomputeroraudio-videoequipmentconnectedtothepro- jector.

Selecting from INPUT List Press and quickly release the INPUT button on the projector cabinet to display the Source list. Each time the INPUT button is pressed, the input source will change as follows: Computer 1, Computer 2 (Digital/ Analog), VIDEO, "S-VIDEO", To display the selected source, allow 1 second to elapse.

Detecting the Signal Automatically Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the in- put source will change as follows:

Computer 1 Computer 2 (Digital) Computer 2 (Analog) VIDEO S-VIDEO Computer 1 ...

TIP: Ifnoinputsignalispresent,theinputwillbeskipped.

27

3. Projecting an Image (Basic Operation)

Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on.

1. Press the MENU button.

the menu will be displayed.

2. Press the button twice to select [Setup] and press the button or the OK button to select [General].

3. Press the button four times to select [Options (2)].

4. Press the button six times to select [Default Source Select] and press the OK button.

the [default source select] screen will be displayed. see page 65.

5. Select a source as the default source, and press the OK button.

6. Press the BACK button a few times to close the menu.

7. Restart the projector.

the source you selected in step 5 will be projected.

TIP:WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheANALOGIN-1input willpowerontheprojectorandsimultaneouslyprojectthecomputersimage.([Directpoweron(Comp1)]Seepage65.)

28

3. Projecting an Image (Basic Operation)

Adjusting the Picture Size and Position Use the adjustable tilt foot, the zoom lever or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity.

Finely adjusting the size of an image [Zoom](Seepage29)

Adjusting the focus [Focus](Seepage29)

Adjusting the throw angle (the height of an image) Adjusting the Tilt Foot (See page 30)

Adjusting the left and right tilt of an image Adjustingtheleftandrighttiltofanimage[Rearfoot] (See page 30)

Adjusting the keystone correction "Correcting Keystone Distortion"* (See page 32, 33)

* Keystone correction can be also performed automatically. See page 31.

29

3. Projecting an Image (Basic Operation)

Focus Use the FOCUS ring to obtain the best focus.

Zoom Use theZOOM lever to adjust the image size on the screen.

30

3. Projecting an Image (Basic Operation)

1

2

4

3

adjustable tilt footadjustable tilt foot lever

Adjusting the Tilt Foot 1. Lift the front edge of the projector.

CAUTION:

Do not try to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and during its cool down period after it is turned off.

2. Push straight up and hold the Adjustable Tilt Foot Lever on the front of the projector to extend the adjustable tilt foot.

3. Lower the front of the projector to the desired height.

4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt foot.

the tilt foot can be extended up to 1.8 inch/45 mm.

there is approximately 10 degrees (up) of adjustment for the front of the projector.

rotate the rear foot to the desired height in order to square the im- age on the projection surface.

CAUTION:

Donotusethetilt-footforpurposesotherthanoriginallyintended. Misuses such as using the tilt foot to carry or hang (from the wall

or ceiling) the projector can cause damage to the projector.

Adjusting the left and right tilt of an image [Rear foot]

1. Remove the spacer (black rubber) from the rear foot.

a spacer is provided for leveling the projector. Keep the spacer for future use.

2. Rotate the rear foot.

the rear foot can be extended up to 0.4 inch/10 mm. rotating the rear foot allows the projector to be placed horizontally.

NOTE: Donotextendtherearfootbeyonditsheightlimit(0.4inch/10mm).Doing

so may cause the rear foot to come out of the projector. Afterusingtheprojector,attachthespacertotherearfoot.

spacer (black rubber)

rear foot

Up Down

31

3. Projecting an Image (Basic Operation)

Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion

Adjusting with the Auto Keystone Function The Auto Keystone correction feature will correct the vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface.

TIP: Evenwhenthemenusettingfor[Autokeystone]isturnedon,[Keystoneadjustment]canbeadjustedmanually.

Toturnoff[Autokeystone],proceedthefollowingsteps.

1. Press the MENU button

the menu will be displayed.

2. Press the button to select [Setup] and press the OK button. the [general] tab will be highlighted.

3. Press the button. the [auto keystone] will be highlighted.

4. Press the OK button to display the [Auto keystone] screen.

5. Press the or button to select [Off] and press the OK button. 6. Press the MENU button.

the menu will be closed.

NOTE: Verticaldistortionsbetweenoffsetanglesof+/-30degreescanbecorrected. Therangeofkeystonecorrectionisnotthemaximumtiltangleofprojector. TheAutoKeystonecorrectionwilltakeeffectin2secondsafterchangingtheprojectionangleduringprojection. Theleftandright(horizontal)keystonecorrectionisnotavailable. Place the projector so that the lens surface is parallel to the screen. The rear feet of the projector can be adjusted to level the projector.

32

3. Projecting an Image (Basic Operation)

Adjusting with buttons on the cabinet 1. Press the or button with no menus displayed the keystone bar will be displayed.

2. Use the or to correct the keystone distortion. the keystone bar will be closed after a period of time.

NOTE:Whenthemenuisdisplayed,theaboveoperationisnotavailable.Whenthemenuisdisplayed,presstheMENUbuttonto close the menu and start the Keystone correction. Fromthemenu,select[Setup][General][Keystoneadjustment].Thechangescanbesavedwith[Keystonesave].Seepage59.

NOTE: The Keystone correction can cause an image to be slightly blurred because the correction is made electronically.

NOTE: The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection.

NOTE:Turningoff theprojectorwillcauseyourmanualkeystoneadjustmentstoreturnto0.Tosaveyourmanualkeystone adjustments,firstturnoff[Autokeystone]andthenturnon[Keystonesave].Seepage59.

NOTE: AutoandManualKeystonecorrectionanglecouldbelessthan30degreesdependingonthesignaland/oraspectratios. Usingkeystonecorrectioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.

NOTE: Whenthemenuisdisplayed,theKeystoneCorrectionoperationisnotavailablebyusingthebuttonsontheprojectorcabinet. Whenthemenuisdisplayed,presstheBACKbuttontoclosethemenuandthenperformtheKeystonecorrection. Fromthemenu,select[Setup][General][Keystoneadjustment].Thechangescanbesavedwith[Keystonesave]. See page 59.

NOTE:Ifyouhaveoneofthefollowingconditions,theprojector'sAuto Keystone may not be performed correctly. - the screen is tilted - the room temperature is too high or too low - theopticalzoomismaximizedorminimized

33

3. Projecting an Image (Basic Operation)

Adjusting with the Remote Control 1. Press the MENU button.

the menu will be displayed.

2. Press the button to select [Setup] and press the OK or button.

3. Press the button to select [Keystone adjustment] from the [General] tab.

4. Press the or button. adjust so that the image is rectangular.

5. Press the MENU button.

The menu will be closed.

34

BLANK

VOL

FREEZE

D.ZOOM

MENU

RD-439E

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

3. Projecting an Image (Basic Operation)

Automatically Optimizing on RGB Image Adjusting the Image Using Auto PC adjustment Optimizing an RGB image automatically. Press the AUTO PC button to optimize an RGB image automatically.

[Poor picture]

[normal picture]

Press the AUTO PC button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) This adjustment may be necessary when you connect your computer for the first time.

NOTE: Somesignalsmaynotbedisplayedcorrectlyortaketime. TheAutoPCadjustmentfunctiondoesnotworkforcomponent,video,andDVIdigitalsignals. If theAutoPC adjustment operation cannot optimize theRGBsignal, try to adjustHorizontal/Vertical PositionClock and Trackingmanually.Seepage54, 55.

Turning Up or Down Volume

increase volume

decrease volume

Sound level from the speaker can be adjusted.

TIP: Whennomenusappear,the and buttonsontheprojectorcabinetworkasavolumecontrol. The[Beep]soundvolumecannotbeadjusted.Toturnoffthe[Beep]sound,fromthemenu,select[Setup][Options(1)] [Beep][Off].

NOTE: Volumecontrolisnotavailablewiththe or buttonwhenanimageisenlargedbyusingtheD.ZOOM(+)buttonorwhen

the menu is displayed. Soundvolumecanbeadjustedandsavedforeachinputseparately.

increase volumedecrease volume

35

Turning off the Projector To turn off the projector:

3. Projecting an Image (Basic Operation)

1. Press the POWER ( ) button on the projector cabinet or the remote control. The Push POWER button again to turn off power. /Carbon savings-Session 23.220(g-CO2) message will appear. See page 39. Amount of carbon emission reduc- tion will be displayed only when [Lamp mode] is set to [Quiet].

When [Lamp mode] is set to [Normal], the amount of carbon emission reduction will be displayed as 00.000 (g-CO2).

Power On Standby

Steady green light

Steady orange light

CAUTION: Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.

CAUTION: Theprojector cannot be turnedoff for 60 secondsafter the

lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

2. Press the POWER button again.

The projector turns off and goes into standby mode.

When in standby mode, the POWER indicator will light or- ange (the cooling fans stop at the same time) and the STA- TUS indicator will light green.

3. Turn off the Main Power switch. The POWER indicator will go out.

The projector has a feature calledDirect Power Off. This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or dis- connecting the AC power supply. To turn off the AC power supply when the projector is powered on, use the Main Power Switch, or a power strip equipped with a switch and a breaker.

NOTE:Donotturnoffthemainpowerwithin10secondsofmakingadjust- ment or setting changes and closing the menu. Doingsocancauselossofadjustmentsandsettings.

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

36

After Use Preparation: Make sure that the projector is turned off.

1. Unplug the power cord.

2. Disconnect any other cables.

3. Retract adjustable tilt feet if extended. Reattachthespacer(blackrubber)totherearfootifitwasremoved.

4. Cover the lens with the lens cover.

5. Put the projector and its accessories in the supplied soft case.

NOTE:Whenplacingtheprojectorinthesoftcase,retractthetiltfeetandtherearfeet.Failuretodosomaycasedamagetothe projector.

CAUTION: Use caution when putting the projector in the soft case immediately after the projector has been operating. The projector cabinet is hot.

3. Projecting an Image (Basic Operation)

37

BLANK

VOL

FREEZE

D.ZOOM

MENU

RD-439E

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

4. Convenient Features

Turning off the Image and Sound Press the BLANK button to turn off the image and sound for a short period of time. Press again to restore the image and sound.

Freezing a Picture Press theFREEZEbutton to freezeaprojectedmovingpicturesuch as DVD. Press again to resume motion.

Enlarging a Picture You can enlarge the picture up to 400 percent.

NOTE:Themaximummagnificationmaybelessthanfourtimesdependingon the signal.

To do so:

1. Press the D. ZOOM (+) button to magnify the picture.

To move the magnified image, use the button.

2. Press the button.

The area of the magnified image will be moved.

3. Press the D.ZOOM(-) button.

each time the d.ZOOM(-) button is pressed, the image is reduced.

NOTE: Theimagewillbeenlargedorreducedatthecenterofthescreen. Displayingthemenuwillcancelthecurrentmagnification.

VOL

FREEZE

D.ZOOM

RD-439E

BLANK

MENU

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

BLANK

VOL

FREEZE

D.ZOOM

MENU

RD-439E

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

38

4. Convenient Features

Lamp Mode and Energy-Saving Effect Selecting[Quiet]forLampmodewillhelpyoutoreduceCO2 emissions from the projector. The Lamp mode enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life can be extended by using the Quiet mode.

Lamp Mode Description Status of LAMP indicator

Normal Mode This is the default set t ing (100% Brightness).

Off

Quiet Mode

Select this mode to increase the lamp life (LV-7385/LV-8310/LV-8215: approx.75% Brightness/LV-7380/LV- 7285/LV-7280: approx.80% Bright- ness).

Steady Green light

Changing Lamp Mode Tochangethe[Lampmode]from[Normal]to[Quiet],dothefollowing:

1. Press the MENU button on the remote control to display the menu.

2.Select[Setup][General][Lampmode].

3. Press the ENTER button to display the Lamp mode menu.

4. Press the buttontoselect[Quiet]andpresstheOKbutton.

5. Press the OK button to close the menu.

NOTE: TheprojectorhastheEcomessagefunctionthatwillshowthestatusofQuietmodeonscreen.Select[Setup][Menu] [Eco message][On].Seepage60, 61.

Thelampliferemainingandlamphoursusedcanbecheckedin[Usagetime].Select[Information][Usagetime].Seepage 66.

Theprojectorwillonlyoperateinthe[Quiet]modefor90secondsimmediatelyafterthelampisturnedon. Thelampconditionwillnotbeaffectedevenwhen[Lampmode]ischanged. Ifthereisnosignalforaboutoneminute,theprojectorwilldisplayablue,blackorlogobackground(dependingonsetting) andgointo[Quiet].

Theprojectorwillreturntothe[Normal]modeonceasignalisaccepted. If theprojector isoverheated inNormalmode, theremaybeacasewhere theLampmodeautomaticallychangestoQuiet

mode to protect the projector. This is called forced cooling operation. When the projector is in a forced cooling operation, thepicturebrightnessdecreases.Whentheprojectorcomesbacktonormaltemperature,theLampmodereturnstoNormal mode.

Thermometer symbol [ ] indicates the lampmode isautomaticallyset toa forcedcoolingoperationbecause the internal temperatureistoohigh.Inthiscondition,changing[Lampmode]settinginthemenuwillnotaffecttheactual lampmode andtheLAMPindicatorlightsgreen.

39

4. Convenient Features

Checking Energy-Saving Effect This feature will show energy-saving effect in terms of CO2emissionreduction(kg)when theprojectors [Lamp mode]issetto[Quiet].Thisfeatureiscalledas[Carbonmeter].

Therearetwomessages:[Totalcarbonsavings]and[Carbonsavings-Session].The[Totalcarbonsavings]mes- sage shows the total amount of CO2 emission reduction from the time of shipment up to now. You can check the informationon[Usagetime]from[Information]ofthemenu.Seepage66.

The [Carbon savings-Session]message shows theamount ofCO2 emission reduction between the time of changing to [Quiet]mode immediately after the timeof power-onand the timeof power-off. The [Carbon sav- ings-Session]messagewillbedisplayed in the [PushPOWERbuttonagain to turnoffpower/Carbonsavings- Session/23.220(g-CO2)]messageatthetimeofpower-off.

TIP: TheformulaasshownbelowisusedtocalculatetheamountofCO2emissionreduction.AmountofCO2 emission reduction = Powerconsumptionin[Quiet]for[Lampmode]Powerconsumptionin[Quiet]forLampmodexCO2 conversion factor.* * CalculationforamountofCO2emissionreductionisbasedonanOECDpublicationCO2EmissionsfromFuelCombustion, 2008Edition.

Thisformulawillnotapplytothepowerconsumptionwhichisnotaffectedbywhether[Lampmode]issetto[Quiet]ornot.

40

Preventing the Unauthorized Use of the Projector [Password] A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a password is set, turning on the projector will display the password input screen. Unless the correct password is entered, the projector cannot project an image.

NOTE:The[Password]settingcannotbecancelledbyusingthe[Reset]ofthemenu.

To enable the Password function: 1. Press the MENU button.

the menu will be displayed.

2. Press the button twice to select [Setup] and press the button or the OK button to select [General].

3. Press the button twice to select [Installation].

4. Press the button three times to select [Password] and press the OK button.

the Off/On menu will be displayed.

5. Press the button to select [On] and press the OK button.

the [Password] screen will be displayed.

6. Type in a combination of the four buttons and press the OK button. to cancel this operation, press the MenU button.

NOTE:Apasswordmustbe4to10digitsinlength.Pleasemakeanoteofyourpassword.

41

the [Confirm password] screen will be displayed.

NOTE:Donotforgetyourpassword.Ifyouforgetyourpassword,contactyourdealer.

7. Type in the same combination of buttons and press the OK button. the confirmation screen will be displayed.

8. Select [Yes] and press the OK button.

the Password function has been enabled.

To turn on the projector when Password is enabled: 1. Press the Main Power Switch to the On position (I).

2. Press and hold the POWER button for about 1 second.

the projector will be turned on and display a message to the effect that the projector is password-protected.

3. Press the MENU button.

the Password screen will be displayed.

4. Enter your password in the Password screen and press the OK button.

You can view the projected image.

NOTE:Thepassworddisablemodeismaintaineduntilthemainpoweristurnedoff(bysettingthemainpowerswitchto"" orunpluggingthepowercord).Turningoffthemainpowerandturningitbackonwillrequirepasswordentry.

4. Convenient Features

42

To disable the Password function: 1. Press the MENU button.

the menu will be displayed.

2. Select [Setup] [Installation] [Password] and press the OK button.

the Off/On menu will be displayed.

3. Select [Off] and press the OK button.

the Password Confirmation screen will be displayed.

4. Type in your password and press the OK button.

When the correct password is entered, the Password function will be disabled.

NOTE: If you forget your password, contact your dealer.

4. Convenient Features

43

4. Convenient Features

Network and Alert Mail Settings by Using an HTTP Browser Overview

Connecting the projector to a network allows the projector to send an alert mail that informs the user that the lamp has reached the end of its life or an error has occurred. The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function. Please be sure to use Microsoft Internet Explorer 6.0 or a higher version for the web browser. (This device uses JavaScript and Cookies and the browser should be set to accept these functions. The setting method will vary depending on the version of browser. Please refer to the help files and the other information provided in your software.) Access is gained to the HTTP server function by starting the Web browser on the computer via the network con- nected to the projector and enter the following URL. NetworkSetting

http:// /index.html

AlertMailSetting

http:// /lanconfig.html

Example : Network Setting http://192.168.0.10/index.html

Alert Mail Setting http://192.168.0.10/lanconfig.html

TIP: The default IP address is 192.168.0.10.

NOTE:

IfthePROJECTORNETWORKSETTINGSscreendoesnotappearinthewebbrowser,presstheCtrl+F5keystorefreshyour webbrowser(orclearthecache).

Thedisplaysorbuttonsresponsecanbesloweddownoroperationmaynotbeaccepteddependingthesettingsofyour network.Shouldthishappen,consultyournetworkadministrator.

Theprojectormaynotrespondifitsbuttonsarerepeatedlypressedinrapidintervals.Shouldthishappen,waitamomentand repeat.Ifyoustillcantgetanyresponse,turnoffandbackontheprojector.

Preparation Before Use

Connect the projector to a commercially available LAN cable before engaging in browser operations. See page 22. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be reflected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

44

Network Settings

http:// /index.html

DHCP ..................................Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. NOTE:YoucanchecktheIPaddressinthemenuwhen[ENABLE]isselectedfor[DHCP].Todo so,fromthemenu,select[Information][WiredLAN].

IP ADDRESS .......................Set your IP address of the network connected to the projector when [DISABLE] is selected for [DHCP]. NOTE:YoucancheckyourspecifiedIPaddressinthemenu.Todoso,fromthemenu,select [Information][WiredLAN].

SUBNET MASK ...................Set your subnet mask number of the network connected to the projector when [DISABLE] is selected for [DHCP].

DEFAULT GATEWAY ...............Set your default gateway of the network connected to the projector when [DISABLE] is se- lected for [DHCP].

DNS (PRIMARY) ................Set your primary DNS settings of the network connected to the projector. DNS (SECONDARY) .................Set your secondary DNS settings of the network connected to the projector. UPDATE ..............................Reflect your settings.

NOTE:Closethebrowserafterclicking[UPDATE].Theprojectorwillautomaticallyupdateyour settings.

TIP: Selecting[Networksettings]for[Reset]fromtheprojectorsmenuallowsyoutoreturnthefollowingitemstothefactory default. [DHCP]:DISABLE [IPADDRESS]:192.168.0.10 [SUBNETMASK]:255.255.255.0 [DEFAULTGATEWAY]:192.168.0.1 *[DNS(PRIMARY)]and[DNS(SECONDARY)]willremainunchanged.

4. Convenient Features

45

Alert Mail Setting

http:// /lanconfig.html

This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector.

HOST NAME ............................ Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the host name is unknown, type in a string of characters repre- senting the projector. Example: Projector 1

DOMAIN NAME ....................... Type in the domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used. If the domain name is unknown, type in the right side of @ in the sender's address. Example: canon.com

ALERT MAIL ............................. Checking [ENABLE] will turn on the Alert Mail feature. Checking [DISABLE] will turn off the Alert Mail feature.

SENDERS ADDRESS ............... Type in the senders address. Up to 60 alphanumeric and symbols characters can be used. SMTP SERVER NAME .............. Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric

characters can be used. RECIPIENTS ADDRESS 1 to 3 ... Type in your recipients address. Up to 60 alphanumeric and symbols characters can be

used. APPLY ...................................... Click this button to reflect the above settings EXECUTE .................................. Click this button to send a test mail to check if your settings are correct. STATUS .................................... A reply to a test mail will be displayed.

NOTE: Ifyouexecuteatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkifthenetworksettingsarecorrect. Ifyouenteredanincorrectaddressinatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkiftheRecipients

Address is correct

TIP: TheAlertMailsettingswillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

4. Convenient Features

46

4. Convenient Features

List of Error Messages

Subject/Body Projector status Message

Message subject At the time of sending test mail [Projector]Testmail

At the time when error is found [Projector]Projectorinformation

Message body

Test mail

Alert mail configurations are as follows: Model name: Serial number: Sender's address: SMTP server name: Recipient's address 1: Recipient's address 2: Recipient's address 3:

Lamp replacement

Replace with the new lamp. [Information]

Model name: Serial number: Lamp counter:

Filter cleaning

Please clean filter. [Information]

Model name: Serial number: Filter counter: Lamp counter:

Lamp cover error

The lamp cover is not installed properly. Check and re-attach it if necessary. [Information]

Model name: Serial number: Lamp counter:

Cooling fan error

The cooling fan has stopped. [Information]

Model name: Serial number: Lamp counter:

Lamp error

The lamp will not turn on. [Information]

Model name: Serial number: Lamp counter:

Temperature error

The projector is overheated. [Information]

Model name: Serial number: Lamp counter:

Iris calibration error

The calibration of the iris has failed. [Information]

Model name: Serial number: Lamp counter:

47

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.

1. Press the MENU button on the remote control or projector cabinet to display the Menu.

5. Using On-Screen Menu

BLANK

VOL

FREEZE

D.ZOOM

MENU

RD-439E

POWER

INPUTIMAGE

ASPECT

INFO.

AUTO PC

BACK

2. Press the buttons on the remote control or the projector cabinet to display the submenu.

3. Press the OK button on the remote control or the projector cabinet to highlight the top item or the first tab.

4. Use the buttons on the remote control or the projector cabinet to select the item you want to adjust or set.

You can use the buttons on the remote control or the projector cabinet to select the tab you want.

5. Press the OK button on the remote control or the projector cabinet to display the submenu window.

6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet.

Changes are stored until adjusted again.

7. Repeat steps 2 -6 to adjust an additional item, or press the BACK button on the remote control or the projector cabinet to quit the menu display.

NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.

8. Press the MENU button to close the menu.

To return to the previous menu, press the BACK button.

48

5. Using On-Screen Menu

Menu Elements

highlight

slide bar

source

available button thermometer symbol

Key symbol

Menu windows or dialog boxes typically have the following elements:

Highlight ................................................Indicates the selected menu or item. Source ...................................................Indicates the currently selected source. Slide bar ................................................Indicates settings or the direction of adjustment. Tab .........................................................Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front. Available buttons ..................................Indicates currently available buttons on the projector cabinet or the remote control. Solid triangle .........................................Indicates further choices are available. A highlighted triangle indicates the item is

active. Key symbol ............................................Indicates the Key Lock is enabled. Thermometer symbol ...........................Indicates the lamp is forcibly being cooled down because the internal temperature is

too high. High altitude symbol .................................Indicates the [Fan mode] is set to [High altitude] mode. Remaining countdown time ..................Indicates the remaining countdown time when the Off Timer is preset.

tab

high altitude symbol

remaining countdown time

solid triangle

49

5. Using On-Screen Menu

List of Menu Items Some menu items are not available depending on the input source.

* The asterisk (*) indicates that the default setting varies depending on the signal.

Menu Item Factory default Options

Input

Computer 1 * Computer 2 (Digital) * Computer 2 (Analog) * VIDEO * S-VIDEO *

Adjustment

Image

Image mode * 1:Standard, 2:Presentation, 3:Cinema, 4:Video, 5:sRGB

Detail settings

Reference * Standard, Presentation, Cinema, Video, sRGB Gamma Dynamic, Natural, Black detail Color temperature * 5000K, 6500K, 7300K, 8300K, 9300K, 10500K Auto iris (LV-7285/ LV-7280) Off, On

Brightness R Brightness G Brightness B Contrast R Contrast G Contrast B

*

Brightness Contrast Sharpness Color level Color balance Reset

Input signal

Clock * Tracking * Horizontal position * Vertical position * Overscan * 0[%],5[%],10[%]

Aspect Auto LV-7385/LV-7380/LV-7285/LV-7280:Auto, 4:3, 16:9,

15:9, 16:10, Wide zoom, True size

Auto LV-8310/LV-8215: Auto, 4:3, 16:9, 15:9, 16:10, Let- terbox, True size

D.image shift 0 (Not available on LV-8310/LV-8215)

Setup

General

Auto keystone On Off, On Keystone adjustment Keystone save Off Off, On

Screen color Off Off, Whiteboard, Greenboard, Greenboard (Gray), Light yellow, Light green, Light blue, Sky blue, Light rose, Pink

Lamp mode Normal Normal, Quiet

Closed caption Off Off, Caption 1, Caption 2, Caption 3, Caption 4, Text 1, Text 2, Text 3,Text 4

Language English

English, Deutsch, Franais, Italiano, Espaol, Sven- ska, , Dansk, Portugus, etina, Magyar, Polski, Nederlands, Suomi, Norsk, Trke, , , , ,

Menu

Color select Color Color, Monochrome Input OSD On Off, On Eco message Off Off, On Display time 45 sec Manual, 5 sec, 15 sec, 45 sec No signal screen Blue Blue, Black, Canon logo Filter message 1500(H) Off, 100(H), 200(H), 500(H), 1000(H), 1500(H)

Installation

Image flip H/V None None, Rear, Ceiling mounted, Rear, Ceiling mount- ed

Key lock Off Off, On Password Off Off, On Communication speed 19200bps 4800bps, 9600bps, 19200bps

50

5. Using On-Screen Menu

Setup

Options (1)

Auto PC adjustment Normal Off, Normal, Fine Fan mode Auto Auto, High, High altitude

Input signal select

Computer 1 RGB/ COMPONENT RGB/COMPONENT, RGB, COMPONENT

Computer 2 (Analog)

RGB/ COMPONENT RGB/COMPONENT, RGB, COMPONENT

VIDEO Auto Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

S-VIDEO Auto Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

WXGA mode

LV-7385/ LV-7380/ LV-7285/ LV-7280: Off LV-8310/ LV-8215: On

Off, On

Progressive On Off, On Beep On Off, On

Options (2)

Off timer Off Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 Standby mode Normal Normal, Power-saving Direct power on (AC) Off Off, On Direct power on (Comp1) Off Off, On Power management Off Off, 0:05, 0:10, 0:20, 0:30

Default source select Last Last, Auto, Computer 1, Computer 2(Digital), Com- puter 2(Analog), VIDEO, S-VIDEO

Information

Usage time

Remaining lamp time Lamp counter Filter counter Total carbon savings

Input

Input signal Source index Horizontal frequency Vertical frequency Input signal type RGB, COMPONENT, VIDEO, S-VIDEO, HDTV

Video type NTSC, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

Sync type Separate sync, Composite sync, Sync on green, Sync on video

Sync polarity Scan type Interlace, Progressive

Wired LAN

Projector name IP address Subnet mask Gateway address MAC address

Version

Model Serial number Firmware version Data version

Reset

Current signal All data Network settings Lamp counter Filter counter

51

5. Using On-Screen Menu

4 Menu Descriptions & Functions [Input]

Computer 1

Selects the computer connected to your ANALOG IN-1 input connector.

NOTE: WhenthecomponentinputsignalisconnectedtotheANALOGIN-1connector,select[Computer1]. TheprojectorwilldetermineiftheinputsignalisRGBorcomponentsignal.

Computer 2 (Digital & Analog)

Selects the computer connected to your DIGITAL IN / ANALOG IN-2 connector.

NOTE:WhenthecomponentinputsignalisconnectedtotheDIGITALIN/ANALOGIN-2connector,select[Computer2(Analog)].

VIDEO

Selects what is connected to your VIDEO input-audio-video equipment.

S-VIDEO

Selects what is connected to your S-VIDEO input-audio-video equipment.

NOTE:Aframemayfreezeforabriefperiodoftimewhenavideoisplayedbackinfast-forwardorfast-rewindwithaVideoor S-Video source.

52

5. Using On-Screen Menu

Menu Descriptions & Functions [Adjustment] [Image]

[Image mode]

Whenselectinguseradjustable[Imagemode],thesubmenuwillbedisplayed. Youcancustomizeeachgammaorcolor.Todoso,firstselect[Imagemode]andpresstheOKbutton,thenpro- ceed using the following steps.

[Detail settings]

[LV-7385/LV-7380/LV-8310/LV-8215] [LV-7285/LV-7280]

Selecting Reference Setting [Reference]

This option allows you to adjust neutral tint for yellow, cyan or magenta. There are five factory presets optimized for various types of images, you can set user adjustable settings.

Standard................ Select this to project an image with a similar quality to that of the original image. An image is projected with a high regard for reproduction of white.

Presentation .......... Select this to project an image with a similar quality to that of the original image. A bright and high- contrast image is projected.

Cinema .................. Select this to project a moving picture. A picture is projected with a high regard for color tone repro- duction.

53

5. Using On-Screen Menu

Video ..................... Select this to project a regular picture such as TV program. sRGB ..................... Select this when you want to project an image from an sRGBcompatible digital camera. An image is

projected in the display mode conforming to the sRGB Standard.

Selecting Gamma Correction Mode [Gamma]

Each mode is recommended for: Dynamic ................ Creates a high-contrast picture. Natural ................... Natural reproduction of the picture. Black detail ............ Emphasizes detail in dark areas of the picture.

Adjusting Color Temperature [Color temperature]

This option allows you to select the color temperature of your choice: 5000K, 6500K, 7300K, 8300K, 9300K, 10500K.

NOTE:When[Standard]or[Presentation]isselectedin[Reference],[Colortemperature]isnotavailable.

Adjusting Brightness and Contrast [Auto iris] (LV-7285/LV-7280)

This function automatically controls the amount of light in response to an input signal. Reducing amount of light can create a truer black during a dark scene.

NOTE: When[Presentation]or[Cinema]isselectedfor[Imagemode],[Autoiris]willautomaticallyturnonatthefactorypreset. [Autoiris]cannotbeselectedinthefollowingconditions: - [Lampmode]:[Quiet] - [Fanmode]:[High]or[Highaltitude] - [Closedcaption]:alltheoptionsotherthan[Off]whenaVideoorS-Videoinputisselected.

Adjusting White Balance [Brightness RGB/Contrast RGB]

This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the screen; Contrast for each color (RGB) to adjust the white level of the screen.

Adjusting Brightness, Contrast, Sharpness, Color level and Color balance

You can adjust brightness, contrast, sharpness, color level and color balance. Brightness ............. Adjusts the brightness level or the black level of the image. Contrast ................. Adjusts the intensity of the image according to the incoming signal (White level of the image). Sharpness .............. Controls the detail of the image for Video. Color level .............. Increases or decreases the color saturation level. Color balance ........ Varies the color level from +/- green to +/-blue. The red level is used as reference.

Input signal Brightness Contrast Sharpness Color level Color balance Computer

(RGB Analog) Yes Yes Yes No No

Computer (RGB Digital) Yes Yes Yes No No

Component Yes Yes Yes Yes Yes Video, S-Video Yes Yes Yes Yes Yes

Yes=Adjustable, No=Not adjustable

Reset

Thesettingsandadjustmentsfor[Adjustment]willbereturnedtothefactorysettingswiththeexceptionofthefol- lowing;numbersand[Reference]withinthe[Imagemode]screen. Thesettingsandadjustmentsunder[Detailsettings]withinthe[Imagemode]screenthatarenotcurrentlyselect- ed will not be reset.

54

5. Using On-Screen Menu

[Input signal]

Adjusting Clock and Phase [Clock/Tracking]

Thisallowsyoutomanuallyadjust[Clock]and[Tracking].

Clock ..................... Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the first time.

Tracking ................ Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) Use [Tracking] only after the [Clock] is complete.

55

5. Using On-Screen Menu

Adjusting Horizontal/Vertical Position [Horizontal position/Vertical position]

Adjusts the image location horizontally and vertically.

- Animagecanbedistortedduringtheadjustmentof[Clock]and[Tracking].Thisisnotmalfunction.

- Theadjustmentsfor[Clock],[Tracking],[Horizontalposition],and[Verticalposition]willbestoredinmemory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied.

Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[Reset][Currentsignal]or[Alldata] and reset the adjustments.

Selecting Overscan Percentage [Overscan]

Select overscan percentage (0%, 5% and 10%) for signal.

Projected image

Overscaned by 10%

NOTE: The[0[%]]cannotbeselectedwhenVIDEOandS-VIDEOsignalsareused. [Overscan]isnotavailablewhen[Truesize]isselectedfor[Aspect].

56

5. Using On-Screen Menu

Selecting Aspect Ratio [Aspect]

The term aspect ratio refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. Thistableshowstypicalresolutionsandaspectratiosthatmostcomputerssupport.

Resolution Aspect Ratio VGA 640 x 480 4:3 SVGA 800 x 600 4:3 XGA 1024 x 768 4:3 WXGA 1280 x 768 15:9 WXGA 1280 x 800 16:10 WXGA+ 1440 x 900 16:10 SXGA 1280 x 1024 5:4 SXGA+ 1400 x 1050 4:3 UXGA 1600 x 1200 4:3

Options Function Auto The projector will automatically determine the incoming signal and display it in its

aspect ratio. ( next page) The projector may erroneously determine the aspect ratio depending on its signal. If this occurs, select the appropriate aspect ratio from the following.

4:3 The image is displayed in 4:3 aspect ratio. 16:9 The image is displayed in 16:9 aspect ratio. 15:9 The image is displayed in 15:9 aspect ratio. 16:10 The image is displayed in 16:10 aspect ratio. Wide zoom (LV-7385/LV-7380/LV- 7285/LV-7280)

The image is stretched left and right. Parts of the displayed image are cropped at the left and right edges and therefore not visible.

Letterbox (LV-8310/LV-8215)

The image of a letterbox signal is stretched equally in the horizontal and vertical direc- tions to fit the screen. Parts of the displayed image are cropped at the top and bottom edges and therefore not visible.

True size The projector displays the current image in its true resolution when the incoming com- puter signal has a lower resolution than the projectors native resolution.

[Example 1] When the incoming signal with the resolution of 800 x 600 is displayed on the LV-7385/LV- 7380/LV-7285/LV-7280:

[Example 2] When the incoming signal with the resolution of 800 x 600 is displayed on the LV-8310/ LV-8215:

NOTE: Whenanon-computersignalisdisplayed,the[Truesize]isnotavailable. Whenasignalwithahigherresolutionthantheprojectorsnativeresolutionisdisplayed,[True size]isnotavailable.

57

5. Using On-Screen Menu

Sample image when the appropriate aspect ratio is automatically determined

LV-7385/LV-7380/LV-7285/LV-7280

[Computersignal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10

Sample image when the appro- priate aspect ratio is automati- cally determined

[Videosignal] Aspect ratio of incoming signal 4:3 Letterbox Squeeze

Sample image when the aspect ratio is automatically determined

NOTE:Todisplayasqueezedsignal properly,select[16:9]or[Widezoom].

LV-8310/LV-8215 [Computersignal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10

Sample image when the appro- priate aspect ratio is automati- cally determined

[Videosignal] Aspect ratio of incoming signal 4:3 Letterbox Squeeze

Sample image when the aspect ratio is automatically determined

NOTE:Todisplayaletterboxsignal properly,select[Letterbox].

NOTE:Todisplayasqueezedsignal properly,select[16:9].

TIP: Imagepositioncanbeadjustedverticallyusing[D.imageshift]whenthe[16:9],[15:9],or[16:10]aspectratiosareselected.

( next page) Thetermletterboxreferstoamorelandscape-orientedimagewhencomparedtoa4:3image,whichisthestandardaspect

ratio for a vide source. Theletterboxsignalhasaspectratioswiththevistasize1.85:1orcinemascopesize2.35:1formoviefilm. Thetermsqueezereferstothecompressedimageofwhichaspectratioisconvertedfrom16:9to4:3.

58

5. Using On-Screen Menu

Adjusting the Vertical Position of Image [D.image shift] (not available on LV-8310/LV-8215)

When[16:9],[15:9],or[16:10]isselectedin[Aspect],theimageisdisplayedwithblackbordersonthetopandbot- tom. You can adjust the vertical position from the top to the bottom of the black area.

59

5. Using On-Screen Menu

Menu Descriptions & Functions [Setup] [General]

Enabling Auto Keystone [Auto keystone]

This feature allows the projector to detect its tilt and correct vertical distortion automatically. ToturnofftheAutoKeystonefeature,select[Off].

NOTE:When[Autokeystone]issetto[On],[Keystonesave]isnotavailable.Nexttimeyouturnonthepower,theAutokeystone functionwillworkandthedatastoredwith[Keystonesave]willbeinvalid.

Correcting Vertical Keystone Distortion Manually [Keystone adjustment]

You can correct vertical distortion manually.

Saving Vertical Keystone Correction [Keystone save]

This option enables you to save your current keystone settings.

Off .......................... Does not save current keystone correction settings On .......................... Saves current keystone correction settings

Saving your change once affects all sources. The changes are saved when the projector is off.

Selecting Wall Color Correction Mode [Screen color]

This function allows for quick adaptive color correction in applications where the screen material is not white. The following 10 options are available: Off, Whiteboard, Greenboard, Greenboard (Gray), Light yellow, Light green, Light blue, Sky blue, Light rose and Pink.

NOTE:When[Whiteboard]isselected,thelightoutputbecomeslow.

60

5. Using On-Screen Menu

Selecting Lamp Mode [Lamp mode]

Selecting[Quiet]forLampmodewillhelpyoutoreduceCO2 emissions from the projector. (Amount of CO2 emission reduction is calculated based on power consumption) This feature enables you to select two brightness modes of the lamp: Normal and Quiet modes. The lamp life can be extended by using the Quiet mode.

Setting Closed Caption [Closed caption]

This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video.

Off ......................... This exits the closed caption mode. Caption 1-4............ Text is superimposed. Text 1-4 ................. Text is displayed.

NOTE: Theclosedcaptionisnotavailableunderthefollowingconditions: whenmessagesormenusaredisplayed. whenanimageismagnified,frozen,ormuted.

Selecting Menu Language [Language]

You can choose one of 21 languages for the on-screen menu.

[Menu]

Selecting Menu Color [Color select]

You can choose between two color modes for menu color: Color and Monochrome.

Turning On / Off Input Display [Input OSD]

This option turns on or off input name display such as Computer 1, Computer 2(Digital), Computer 2(Aanalog), VIDEO, S-VIDEO and No Input to be displayed on the top right of the screen.

Turning On / Off Eco Message [Eco message]

This option turns on or off the following messages when the projector is turned on.

TheEcoMessagepromptstheusertosaveenergy.When[Normal]isselectedfor[Lampmode],youwillgetames- sagetopromptyoutoselect[Quiet]for[Lampmode].

61

5. Using On-Screen Menu

When[Quiet]isselectedfor[Lampmode]

To close the message, press the OK or the BACK button. The message will disappear if no button operation is done for 30 seconds.

When[Normal]isselectedfor[Lampmode]

PressingtheOKbuttonwilldisplaythe[Lampmode]screen.( page 38) To close the message, press the BACK button.

Selecting Menu Display Time [Display time]

This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are Manual, 5 sec, 15 sec, and 45 sec.

Selecting a Color for Background [No signal screen]

Use this feature to display a blue, black screen or the Canon logo screen when no signal is available.

Selecting Interval Time for Filter Message [Filter message]

The projector has a feature that informs you of the timing for cleaning the filters. This item allows you to select the time preference between displaying the message for cleaning the filters. Clean the filter when you get the message Please clean filter. See page 69. Five options are available: Off, 100(H), 200(H), 500(H), 1000(H), 1500(H) The default setting is 1500(H). Change the interval time depending on the degree of dust and dirt on the filters. NOTE: 1) Themessageforlampreplacementandfiltercleaningwillbedisplayedunderthefollowingconditions: - one minute after the projector has been powered on. - when the POWER button on the projector cabinet or on the remote control is pressed. To cancel the message, press any button on the projector cabinet or the remote control. 2) Yoursettingwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

62

5. Using On-Screen Menu

[Installation]

Selecting Projector Orientation [Image flip H/V]

This sets your image for your type of projection application. The options are: front projection, rear projection, ceiling mounted projection and rear ceiling mounted projection.

Disabling the Cabinet Buttons [Key lock]

This option turns on or off the Key Lock function for cabinet buttons.

NOTE: TheKeylocksettingwillnotaffecttheremotecontrolorPCcontrolfunctions. Whenthecabinetbuttonsaredisabled,pressingandholdingtheBACKbuttonontheprojectorcabinetforabout10seconds

will change the setting to enable.

TIP:TheKeylockicon( )willbedisplayedatthetoprightofthemenuwhenKeylockisenabled.

Enabling Password [Password]

This feature turns on or off the Password function. Unless the correct password is entered, the projector cannot project an image. See page 40.

NOTE:Yoursettingwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

None Rear, Ceiling mounted

Rear Ceiling mounted

63

5. Using On-Screen Menu

Selecting Communication Speed [Communication speed]

This feature sets the baud rate of the SERVICE PORT (D-Sub 9 Pin). It supports data rates from 4800 to 19200 bps. The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs).

NOTE:Yourselectedcommunicationspeedwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

[Options (1)]

Setting Auto Adjust [Auto PC adjustment]

Selecting[Normal]or[Fine]willautomaticallyexecuteAutoPCadjustmentfunctionatthetimeofsignalswitching.

This feature sets the Auto PC adjust mode so that the analog RGB image can be automatically or manually adjust- ed for noise and stability. You can automatically make adjustment in two ways: Normal and Fine

Off .......................... The RGB image will not be automatically adjusted. You can manually optimize the RGB image.

Normal ................... Default setting. The RGB image will be automatically adjusted. Normally select this option. Fine ........................ Select this option if fine adjustment is needed. It takes more time to switch to the source than when [Nor-

mal] is selected.

Enabling Fan Speed Mode [Fan mode]

This option allows you to select three modes for fan speed: Auto, High, and High altitude.

Auto .......................................... The built-in fans automatically run at a variable speed according to the internal temperature. High .......................................... The built-in fans run at a fixed high speed. High altitude ............................. The built-in fans run at a high speed. Select this option when using the projector in places at

5500 ft./1600 m or higher.

Whenyouwishtocooldownthetemperatureinsidetheprojectorquickly,select[High].

NOTE:ItisrecommendedthatyouselectHighspeedmodeifyoucontinuetousetheprojectorforconsecutivedays.

NOTE: ItisrecommendedthatyouselectHighspeedmodeifyouusetheprojectornon-stopforconsecutivedays. Besuretoselect[Highaltitude]whenusingtheprojectorataltitudesapproximately5500feet/1600metersorhigher. Usingtheprojectorataltitudesapproximately5500feet/1600metersorhigherwithoutsettingto[Highaltitude]cancause theprojector to overheat and theprotector could shut down. Furthermore, theprojector couldnot turnondue to the in- creased temperature of the lamp after power off. If these happen, wait a couple minutes and turn on the projector.

Usingtheprojectorataltitudeslessthanapproximately5500feet/1600metersandsettingto[Highaltitude]cancausethe lamptoovercool,causingtheimagetoflicker.

YourFanmodesettingwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

64

5. Using On-Screen Menu

Selecting Signal Format [Input signal select]

[Computer1],[Computer2(Analog)] Allowsyoutochoose[Computer1]or[Computer2(Analog)]foranRGBsourcesuchasacomputer,or[COM- PONENT]foracomponentvideosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andthe projector automatically detects a component signal. However there may be some component signals that the projectorisunabletodetect.Ifthisisthecase,select[COMPONENT].

[VIDEO&S-VIDEOSystemSelect] This feature enables you to select composite video standards automatically or manually. Normallyselect[Auto]andtheprojectorwillautomaticallydetectthevideostandard. In the case where the projector has difficulty detecting the video standard, select the appropriate video stan- dard from the menu. This must be done for VIDEO and S-VIDEO respectively.

Enabling or Disabling WXGA Mode [WXGA mode]

Selecting[On]willgiveprioritytoaWXGA(1280x768)signalinrecognizinganinputsignal. When[WXGAmode]issetto[On],anXGA(1024x768)signalmaynotberecognizedonLV-7385,LV-7380,LV- 7285orLV-7280.Inthiscase,select[Off].

Enabling the deinterlace [Progressive]

Turns on or off the deinterlace function for a telecine signal. Off ......................... Select this option if there is any jitter or artifacts in video. On .......................... Default standard setting.

NOTE:ThisfeatureisnotavailableforRGBandHDTVsignals.

Enabling Key Sound and Error Sound [Beep]

This feature turns on or off the keypad sound or alarm when a button on the cabinet and the remote control is pressed or an error occurs.

NOTE:The[Beep]soundvolumecannotbeadjusted.The[Beep]soundcannotbemutedbyusingtheBLANKbutton.Toturnoff the[Beep]sound,select[Off]for[Beep].

[Options (2)]

Setting Off Timer [Off timer]

You can use the Off Timer feature to turn off the projector (standby mode) automatically at a preset time. Eight preset times can be selected: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00. Theremainingcount-downtimewillbeshownatthetoprightofthemenuwhenthe[Offtimer]ispreset. ThePOWERindicatorblinksgreenincycleof2.5secondsonand0.5secondoffwhen[Offtimer]ispreset. When the off timer remaining time reaches 3 minutes, a message will be displayed to that effect.

Selecting Power-saving in [Standby mode]

Theprojectorhastwostandbymodes:[Normal]and[Power-saving].

65

5. Using On-Screen Menu

The Power-saving mode is the mode that allows you to put the projector in the power-saving condition which con- sumes less power than the Normal mode. The projector is preset for Normal mode at the factory.

Normal .................. POWER indicator: Orange light/STATUS indicator: Green light Power-saving ........ POWER indicator: Red light/STATUS indicator: Off

The following connectors, buttons or functions will not work during this mode. - SERVICE PORT, MONITOR OUT connector, and AUDIO OUT connector - LAN, Mail Alert, Direct power on (Comp1) functions - Buttons other than POWER button on the cabinet - Buttons other than POWER button on the remote control

NOTE:Yoursettingwillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

Enabling Direct Power ON [Direct power on (AC)]

Turns the projector on automatically when AC power is supplied. This eliminates the need to always use the POW- ER button on the remote control or projector cabinet.

Turning On the Projector By Applying Computer Signal [Direct power on (Comp1)]

When the projector is in Standby mode, applying a computer signal from a computer connected to the ANALOG IN-1 input will power on the projector and simultaneously project the computers image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. To use this function, first connect a computer to the projector and the projector to an active AC input.

NOTE:

Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionin combinationofthePowermanagementfunction.

Thisfunctionwillnotbeavailableunderthefollowingconditions: - whenacomponentsignalisappliedtotheANALOGIN-1connector - whenaSynconGreenRGBsignalorcompositesyncsignalisapplied

Once[Directpoweron(Comp1)]isturnedon,[Power-saving]modecannotbeselected.[Power-saving]modewillnottake effectregardlessofwhetheritisselectedfor[Standbymode].

ToenabletheDirectpoweron(Comp1)afterturningofftheprojector,wait3secondsandinputananalogRGBsignal. IfananalogRGBsignalisstillpresentwhentheprojectoristurnedoff,theDirectpoweron(Comp1)willnotworkandthe projectorremainsinstandbymode.

Enabling Power Management [Power management]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 5 min., 10 min., 20 min., 30 min.) if there is no operation with no signal received by any input. When the remaining time reach- es 3 minutes, a message will be displayed to that effect.

Selecting Default Source [Default source select]

You can set the projector to default to any one of its inputs each time the projector is turned on.

Last ....................... Sets the projector to default to the previous or last active input each time the projector is turned on. Auto ....................... Searches for an active source in order of Computer 1 Computer 2 (Digital) Computer 2 (Analog)

VIDEO S-VIDEO Computer 1 and displays the first found source. Computer 1 ........... Displays the RGB source from the Computer 1 Input [ANALOG IN-1] connector every time the projector

is started up. Computer 2 (Digital) ... Displays the DVI digital source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Digital) connec-

tor every time the projector is started up. Computer 2 (Analog) .. Displays the RGB analog source from the Computer 2 Input [DIGITAL IN/ANALOG IN-2] (Analog) con-

nector every time the projector is started up. VIDEO .................... Displays the Video source from the VIDEO IN connector every time the projector is started up. S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is started up.

66

5. Using On-Screen Menu

Menu Descriptions & Functions [Information] Displays the status of the lamp / filter, the current signal, the wired LAN, and the version. This item has four pages. The information included is as follows:

NOTE:PressingtheINFObuttonontheremotecontrolwillshowthe[Information]menuitems.

[Usage time]

[Remaininglamptime](%) [Lampcounter](H) [Filtercounter](H) [Totalcarbonsavings](kg-CO2)

Remaining Lamp Time/Lamp Counter

The projector has the Quiet mode. The lamp life varies depending on two modes: quiet mode and normal mode. Selecting the Quiet mode allows you to reduce power consumption. The[Remaininglamptime]showsthepercentageofremainingbulblife.The[Lampcounter]showstheamountof lamp usage (hours). Whentheremaininglamptimereaches0%,theReplacewiththenewlamp.messagewillbedisplayed.Re-

place with the new lamp. See page 71 for lamp replacement. Themessageforlampreplacementwillbedisplayedunderthefollowingconditions: - one minute after the projector has been powered on. - when the POWER button on the projector cabinet or on the remote control is pressed. To cancel the message, press any button on the projector cabinet or the remote control.

When the remaining lamp time reaches0%, theRemaining lamp timebar indicator changes from0% to 100(H) in red and starts counting down.

When the remaining lamp time reaches 0 hours, the projector will not turn on.

Lamp counter Lamp remaining time

Lamp mode [Normal] only [Quiet] only Factory setting 0 hours 100%

Lamp life 4000 hours (mini.) 5000 hours (max.) 0%

TotalCarbonSavings This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving

calculation is based on the OECD (2008 Edition).

67

5. Using On-Screen Menu

[Input]

[Inputsignal] [Sourceindex] [Horizontalfrequency] [Verticalfrequency] [Inputsignaltype] [Videotype] [Synctype] [Syncpolarity] [Scantype]

[Wired LAN]

[Projectorname] [IPaddress] [Subnetmask] [Gatewayaddress] [MACaddress]

[Version]

[Model] [Serialnumber] [Firmwareversion] [Dataversion]

68

5. Using On-Screen Menu

Menu Descriptions & Functions [Reset]

Resetting settings and adjustments [Reset]

The Reset feature allows you to change adjustments and settings to the factory preset.

Clearing adjustments and settings for the current signal [Current signal] Resets the adjustments for the current signal to the factory preset levels. Theitemsthatcanberesetare:[Imagemode],[Brightness],[Contrast],[Sharpness],[Colorlevel],[Colorbalance], [Aspect],[Horizontalposition],[Verticalposition],[Clock],[Tracking],and[Overscan].

Clearing all the adjustments and settings [All data] Reset all the adjustments and settings for all the signals to the factory preset. All items can be reset EXCEPT [Language], [No signal screen], [Filtermessage], [Password], [Communication speed], [Standbymode], [Fanmode], [Remaining lamptime], [Lampcounter], [Filtercounter], [Totalcarbonsav- ings],and[Networksettings].

Clearing Networking Settings [Network settings]

Returns[DHCP],[IPADDRESS],[SUBNETMASK],and[GATEWAY]tothedefaultsettings.

Clearing Lamp Hour Meter [Lamp counter]

Resets the lampclockback to zero.Selecting this optiondisplays submenu for a confirmation.Select [Yes] and press the OK button.

NOTE:Elapsedtimeofthelampusewillnotbeaffectedevenwhen[Reset]isdonefromthemenu. NOTE:Theprojectorwillturnoffandgointostandbymodewhenyoucontinuetousetheprojectorforanother100hoursafter thelamphasreachedtheendofitslife.Ifthishappens,presstheINFObuttonontheremotecontrolfor10secondstoresetthe lampclockbacktozero.Dothisonlyafterreplacingthelamp. NOTE:Resettingthelampcounterbeforeorwithoutreplacingthelampwillnotdisplaytheexactlampusagehours.Usingthe lampbeyonditsservicelifemaycausethelamptobreak.Besuretoresetthelampcounterafterreplacingthelamp.

Clearing the Filter Usage Hours [Filter counter]

Resets thefilterusageback to zero.Selecting thisoptiondisplayssubmenu fora confirmation.Select [Yes]and press the OK button.

NOTE:Elapsedtimeofthefilterusewillnotbeaffectedevenwhen[Reset]isdonefromthemenu.

69

6. Maintenance

To clean the air-filter:

Vacuum the filter-through the filter cover.

To replace the filter:

1. Remove the filter cover (2 locations) by pushing up on the tab of the cover.

2. Replace two filters.

(1) gently peel off the filter and clean the filter cover.

(2) attach the new filter to the filter cover.

the air filter comes in two types. these two filters cannot be interchanged.

This section describes the simple maintenance procedures you should follow to clean the filter and replace the lamp.

Cleaning or Replacing the Filter The air-filter keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the filter is dirty or clogged, your projector may overheat.

NOTE: The message for filter cleaning will be displayed for one minute after the projector is turned on or off. To cancel the message, press any button on the projector cabinet or the remote control.

CAUTION

Turnofftheprojector,turnoffthemainpowerswitchandunplugtheprojectorbeforereplacingthefilter. Onlycleantheoutsideofthefiltercoverwithavacuumcleaner. Donotattempttooperatetheprojectorwithoutthefiltercover.

tab

NOTE: When turning over the projector, slowly place it on a soft cloth so as not to scratch the cabinet.

70

6. Maintenance

Cleaning the Cabinet and the Lens 1. Turn off the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.

3. Reinstall the new filter cover (2 locations).

insert the filter cover until you feel click.

4. Clear the filter hours used.

Toresetthefilterusagetime,fromthemenu,select[Reset][Filtercounter]. (See page 68 for resetting the filter usage time.)

NOTE:Donotwashthefilterwithsoapandwater.Soapandwaterwilldamagethefiltermembrane.Beforereplacingthefilter, remove dust and dirt from the projector cabinet. Keep out dust and dirt during filter replacement.

NOTE:Whenyoureplacethelamp,itisalsowisetoreplacethefilter.Thefiltercomesinthesamepackagewithyourreplace- ment lamp.

71

6. Maintenance

Replacing the Lamp When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red and the message Replace with the new lamp.* will appear. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter. See page 68.

CAUTION

DONOTTOUCHTHELAMPimmediatelyafterithasbeenused.Itwillbeextremelyhot.Turntheprojector off, turn off the main power switch and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

DONOTREMOVEANYSCREWSexcepttwolamphousingscrews.Youcouldreceiveanelectricshock.

Donotbreaktheglassonthelamphousing.

Keep finger prints off the glass surface on the lamp housing. Leaving finger prints on the glass surface might cause an unwanted shadow and poor picture quality.

Theprojectorwillturnoffandgointostandbymodewhenyoucontinuetousetheprojectorforanother 100 hours after the lamp has reached the end of its life. If this happens, be sure to replace the lamp. If you continue to use the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer for lamp replacement.

*NOTE:Themessage[Replacewiththenewlamp.]willbedisplayedunderthefollowingconditions: foroneminuteaftertheprojectorhasbeenpoweredon whenthe (POWER)buttonontheprojectorcabinetorontheremotecontrolispressed

To turn off the message, press any button on the projector cabinet or the remote control.

To replace the lamp: Optional lamp and tools needed for replacement:

Replacementlamp

Lamp Projector LV-LP31 LV-7385/LV-8310/LV-8215 LV-LP32 LV-7380/LV-7285/LV-7280

Phillipsscrewdriverandflatheadscrewdriver

72

6. Maintenance

2. Remove the lamp.

(1) Loosen the two screws securing the lamp until the phillips screwdriver goes into a freewheeling condition.

Thetwoscrewsarenotremovable.

Thereisaninterlockonthiscasetopreventtheriskofelectricalshock.Donotattempttocircumventthis interlock.

(2) Remove the lamp by holding it.

interlock

1. Remove the lamp cover. there are two locks on the left and right sides.

(1) Use the tip of the flathead screwdriver to push and release one lock.

(2) Do this for the other lock.

(3) Slowly pull the lamp cover in the direction of the arrow and lift it.

CAUTION:

Make sure that the lamp is cool enough to before removing it.

2

1

3

lock (Push here)

73

6. Maintenance

5. Connect the supplied power cord, turn on the Main Power switch and turn on the projector.

6. Finally, select the menu [Reset] [Lamp counter] to reset the lamp usage hours.

NOTE:Whenyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife,theprojector cannot turn on and the menu is not displayed. Ifthishappens,presstheINFObuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero. Whenthelamptimeclockisresettozero,theLAMPindicatorgoesout.

4. Reattach the lamp cover.

(1) Insert three tabs into three grooves.

(2) Push down both ends of the lamp cover until you feel click.

3. Install a new lamp.

(1) Insert a new lamp until the lamp is plugged into the socket.

CAUTION

Do not use a lamp other than the replacement lamp LV-LP31 (LV-7385/LV-8310/LV-8215) and LV-LP32 (LV- 7380/LV-7285/LV-7280). Order this from your dealer.

(2) Push the top center of the lamp to secure it.

(3) Secure it in place with the two screws.

Besuretotightenthescrews.

74

7. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector.

Indicator Messages

POWER Indicator

Indicator Condition Projector Condition Note Off The main power is off

Blinking light Green

0.5 sec On, 0.5 sec Off

The projector is getting ready to turn on. Wait for a moment.

2.5 sec On, 0.5 sec Off

Off Timer is enabled.

Steady light Green The projector is turned on. Orange [Normal] is selected for [Standby mode] Red [Power-saving] is selected for [Standby mode]

STATUS Indicator

Indicator Condition Projector Condition Note Off Normal

Blinking light Red

1 cycle (0.5 sec On, 2.5 sec Off)

Lamp cover error or lamp housing error Replace the lamp cover or lamp correctly. See page 73.

2 cycle (0.5 sec On, 0.5 sec Off)

Temperature error The projector is overheated. Move the projector to a cooler location.

3 cycle (0.5 sec On, 0.5 sec Off)

Power error Power unit is not working properly. Contact your dealer

4 cycle (0.5 sec On, 0.5 sec Off)

Fan error Fans will not work correctly.

6 cycle (0.5 sec On, 0.5 sec Off)

Lamp error Lamp fails to light. Wait a full minute and then turn on again.

9 cycle (0.5 sec On, 0.5 sec Off)

[Auto iris] error The Auto iris function is not working properly. (LV-7285 and LV-7280). Contact your dealer.

Green Re-firing the lamp The projector is re-firing. Wait for a moment.

Steady light Green Standby([Normal] for [Standby mode])

Orange Key lock is on. You have pressed cabinet button when Key lock is on. See page 62.

LAMP Indicator

Indicator Condition Projector Condition Note Off Normal

Blinking light Red Lamp has reached its end of life. Lamp replacement message will be dis- played.

Replace the lamp.

Steady light Red

Lamp has been used beyond its limit. The projector will not turn on until the lamp is replaced.

Replace the lamp.

Green* Lamp mode is set to Quiet mode.

* This indicator lights green for about 90 seconds immediately after the projector is powered on.

If a temperature error occurs If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the lamp with the STATUS indicator blinking (2-cycle On and Off.) Should this happen, do the following:

- Turn off the main power and unplug the AC power cord. - Move the projector to a cooler location if the room where you are presenting is particularly too warm. - Clean the ventilation holes if they are clogged with dust. - Wait about 60 minutes until the inside of the projector becomes cool enough.

POWer indicator

statUs indicator

laMP indicator

75

7. Appendix

Common Problems & Solutions ( "POWER/STATUS/LAMP Indicator" on page 74.)

Problem Check These Items

Does not turn on Checkthatthepowercordispluggedinandthatthepowerbuttonontheprojectorcabinetortheremotecontrolison.See pages 23 and 24.

Ensurethatthelampcoverorthelampisinstalledcorrectly.Seepage73. Checktoseeiftheprojectorhasoverheated.Ifthereisinsufficientventilationaroundtheprojectororiftheroomwhereyouare

presenting is particularly warm, move the projector to a cooler location. Checktoseeifyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife.Ifso,re-

place the lamp. Thelampmayfailtolight.Waitafullminuteandthenturnonthepoweragain. Thelamphasreachedtheendofitsusablelife.Replacethelamp. Set[Fanmode]to[Highaltitude]whenusingtheprojectorataltitudesapproximately5500feet/1600metersorhigher.Using

the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [High altitude] can cause the projec- tor to overheat and the projector could shut down. Also the projector could not turn on due to the increased temperature of the lamp after power off. If these happen, wait a couple minutes and turn on the projector. See page 63.

Alsowhenthelampisturnedoff,theprojectorinternaltemperatureishot.Ifthepoweristurnedonbeforetheprojectorhas cooled down, the fan will run a short time before the lamp will turn on.

Ifanyoftheaboveisnotthecauseoftheproblem,turnoffthemainpoweranddisconnectthepowercord.Afterallowing5 minutes, plug the power cord and turn on the main power.

Will shut down EnsurethattheOfftimerorPowermanagementisoff.Seepage64, 65.

No picture UsetheINPUTbuttontoselectyoursource.Seepage26. Ensureyourcablesareconnectedproperly. Usemenustoadjustthebrightnessandcontrast.Seepage53. Removethelenscover. Reset the settings or adjustments to factory preset levels using the [Reset] in the Menu. See page 68. EnteryourregisteredPasswordifthePasswordfunctionisenabled.Seepage40. WhenusingwithanotebookPC,besuretoconnectbetweentheprojectorandthenotebookPCbeforeturningonthepowerto

the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector. * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power man-

agement software. Seealsothenextpage.

Picture suddenly becomes dark CheckiftheprojectorisintheForcedcoolingoperationbecauseoftoohighambienttemperature.Ifthisisthecase,lowerthe internal temperature of the projector by selecting [High] for [Fan mode]. See page 63.

Color tone or Color balance is unusual

Checkifanappropriatecolorisselectedin[Screencolor].Ifso,selectanappropriateoption.Seepage59. Adjust[Colorbalance]in[Adjustment].Seepage53.

Image isnt square to the screen

Repositiontheprojectortoimproveitsangletothescreen.Seepage28. UsetheKeystonecorrectionfunctiontocorrectthetrapezoiddistortion.Seepage31.

Picture is blurred Adjustthefocus.Seepage29. Repositiontheprojectortoimproveitsangletothescreen.Seepage28. Ensurethatthedistancebetweentheprojectorandscreeniswithintheadjustmentrangeofthelens.Seepage11, 12, 82, 83. Condensationmayformonthelensiftheprojectoriscold,broughtintoawarmplaceandisthenturnedon.Shouldthishap-

pen, let the projector stand until there is no condensation on the lens.

Picture is distorted MakesuretheVGAcableisconnected. PresstheAUTOPCbuttonontheprojectorcabinetortheremotecontrol.Seepage34.

Flicker appears on screen Set[Fanmode]toothermodethan[Highaltitude]whenusingtheprojectorataltitudesapproximately5500feet/1600meters or lower. Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [High altitude] can cause the lamp to overcool, causing the image to flicker. Switch [Fan mode] to [Auto] or [High]. See page 63.

Image is scrolling vertically, horizontally or both

UsetheINPUTbuttontoselectyoursource.Seepage26. Adjustthecomputerimagemanuallywiththe[Horizontalposition]or[Verticalposition]inthe[Adjustment] [Input signal].

See page 55.

Remote control does not work

Installnewbatteries.Seepage9. Makesuretherearenoobstaclesbetweenyouandtheprojector. Standwithin7m(22feet)oftheprojector.Seepage9.

Indicator is lit or blinking SeethePOWER/STATUS/LAMPIndicatoronpage74.

Cross color in RGB mode PresstheAUTOPCbuttonontheprojectorcabinetortheremotecontrol.Seepage34. Adjustthecomputerimagemanuallywith[Clock]or[Tracking]in[Inputsignal]inthemenu.Seepage54.

Whenever the projector is turned on, a message prompt- ing you to clean the filter will be displayed

CleanorreplacethefilterandthenresettheFiltercounter.Seepage69, 68. Press any button on the remote control or the projector cabinet to clear the message.

The projector is behaving in an erratic way

Turnoffthemainpoweranddisconnectthepowercord. Allow 5 minutes and then plug the power cord and turn on the main power.

The [Projector overheating! See the users manual.] mes- sage is displayed.

Checkforanyobstacleatventilation(inlet)oftherear.Ifthereisanobstacle,removeitorrelocatetheprojectortoanareawith proper ventilation. If the filter is dirty or clogged, clean or replace the filter. After cleaning or replacing the filter, reset the [Filter counter]. See page 69, 68.

For more information contact your dealer.

76

7. Appendix

If there is no picture, or the picture is not displayed correctly.

PoweronprocessfortheprojectorandthePC.

Be sure to connect the VGA cable between the projector and the computer before turning on the computer. There are some notebook PCs, which do not output signal unless there is a projector or monitor connected first.

NOTE:Youcancheck thehorizontal frequencyof thecurrentsignal in theprojectorsmenuunder Information. If it reads 0kHz,thismeansthereisnosignalbeingoutputfromthecomputer.Seepage67orgotonextstep.

Enablingthecomputersexternaldisplay.

Displaying an image on the notebook PCs screen does not necessarily mean it outputs a signal to the projec- tor. When using a PC compatible laptop, a combination of function keys will enable/disable the external dis- play. Usually, the combination of the Fn key along with one of the 12 function keys gets the external display to come on or off. For more details, refer to your computers owners manual.

Non-standardsignaloutputfromthecomputer

If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this happen, deactivate the notebook PCs LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the pre- vious step. Refer to your computers documentation for detailed information.

ImagedisplayedisincorrectwhenusingaMacintosh

When using a Macintosh with the projector, set the DIPswitch of the Mac adapter (not supplied with the projec- tor) according to your resolution. After setting, restart your Macintosh for the changes to take affect.

For setting display modes other than those supported by your Macintosh and the projector, changing the DIP switch on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP switch to the 13 fixed mode and then restart your Macintosh. After that, restore the DIP switches to a dis- playable mode and then restart the Macintosh again.

NOTE:AVideoAdaptercablemanufacturedbyApple Inc. isneeded foraPowerBookwhichdoesnothaveaminiD-Sub 15-pinconnector.

MirroringonaPowerBook

* When using the projector with a Macintosh PowerBook, output may not be set to 1024 x 768 unless mirroring is off on your PowerBook. Refer to owners manual supplied with your Macintosh computer for mirroring.

FoldersoriconsarehiddenontheMacintoshscreen

Foldersoriconsmaynotbeseenonthescreen.Shouldthishappen,select[View][Arrange]fromtheApple menu and arrange icons.

77

7. Appendix

Specifications This section provides technical information about the projectors performance.

Model Name LV-7385/LV-7380/LV-7285/LV-7280/LV-8310/LV-8215

Optical LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215

LCD Panel 0.63" p-Si TFT active-matrix with Micro Lens Array (Aspect 4:3)

0.63" p-Si TFT active-matrix (Aspect 4:3)

0.59" p-Si TFT active-matrix with Micro Lens Array (Aspect 16:10)

Resolution 1024 x 768 pixels* native, up to UXGA with scaling technology 1280 x 800 pixels* native, up to

UXGA with scaling technology (up to SXGA + 1400 dot(H) X 1050dot(V) Max. at RGB digital)

Lens Manual zoom and manual focus F1.7 - 2.0 f = 19.8 - 23.7 mm

Lamp 230W AC lamp (170W in Quiet mode)

180W AC lamp (145W in Quiet mode) 230W AC lamp (170W in Quiet mode)

Brightness* (Presentation mode) 3500 lm 3000 lm 2600 lm 2200 lm 3000 lm 2600 lm

Contrast Ratio* (full white: full black) (Presentation mode)

500:1 2000:1* 500:1 450:1

Uniformity (Presentation mode) 85%

Image Size (Diagonal) 21 to 300/0.53 m to 7.6 m Projection Distance 0.8 m to 11.3 m/31.5" to 444.9" 0.8m to 11.95m/31.5" to 470.5" Projection Angle Tele: 7.9- 8.3/ Wide: 9.5- 9.9 Tele: 8.0- 8.3/ Wide: 9.6- 9.9 Keystone Correction +/- 30 Vertical (Auto keystone)

* Effective pixels are more than 99.99%. * Compliance with ISO21118-2005 *Thevalueismeasuredwhen[Autoiris]issetto[On].

Electrical LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215

Inputs 1 RGB/Component (D-Sub 15 Pin), 1 RGB (Digital/Analog, DVI-29 P, HDCP*4 supported), 1 S- Video (DIN 4 Pin), 1 Video (RCA), 1(L/R) RCA Audio, 2 Stereo Mini Audio

Outputs 1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio Wired LAN Port RJ-45

Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, 1080i, 720p, 480p, 480i /60Hz 1080i, 576p, 576i /50Hz

Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) Vertical: 50 Hz to 120 Hz

Video Bandwidth RGB: 80 MHz (-3dB) Color Reproduction 16.77 million colors simultaneously, Full color

Horizontal Resolution

NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60/YCbCr: 540 TV lines SECAM: 300 TV lines

RGB: 1024 dots (H) x 768 dots (V) RGB: 1280 dots (H) x 800 dots (V)

External Control RS232, IR, Wired LAN Sync Compatibility Separate Sync / Composite Sync / Sync on Green Built-in Speaker 7W (monaural)

Power Requirement LV-7385/LV-7380/LV-7285/LV-7280/LV-8310/LV-8215: 100 - 240V AC, 50 / 60 Hz LV-7385(E)/LV-7380(E)/LV-7285(E)/LV-7280(E)/LV-8310(E)/LV-8215:(E): 200 - 240V AC, 50 / 60 Hz

Input Current

LV-7385: 3.8-1.5A LV-7385(E): 1.8A

LV-7380/LV-7285/LV-7280: 3.2-1.4A LV-7380(E)/LV-7285(E)/LV-7280(E): 1.5A

LV-8310/LV-8215: 3.8-1.5A LV-8310(E)/LV-8215(E): 1.8A

78

7. Appendix

LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215

Power Consump- tion

100V AC

0.6W in Power- saving mode / 10W in Standby mode / 312W in Lamp Normal mode / 237W in Lamp Quiet mode

0.6W in Power-saving mode / 10W in Standby mode / 251W in Lamp Normal mode / 203W in Lamp Quiet mode

0.6W in Power-saving mode / 10W in Standby mode / 312W in Lamp Normal mode / 237W in Lamp Quiet mode

200V AC

0.7W in Power- saving mode / 10W in Standby mode / 294W in Lamp Normal mode / 228W in Lamp Quiet mode

0.7W in Power-saving mode / 10W in Standby mode / 239W in Lamp Normal mode / 195W in Lamp Quiet mode

0.7W in Power-saving mode / 10W in Standby mode / 294W in Lamp Normal mode / 228W in Lamp Quiet mode

*4 What is HDCP/HDCP technology? HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI). If you are unable to view material via the DVI input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC).

Mechanical

LV-7385 LV-7380 LV-7285 LV-7280 LV-8310 LV-8215 Installation Orientation: Front / Rear / Ceiling mounted / Rear, Ceiling mounted

Dimensions 12.5(W) x 13.2(D) x 4.4(H) 317 mm (W) x 336 mm (D) x 111 mm (H) (not including protrusions)

Weight 7.3 lbs / 3.3 kg Fan Noise 35 dB (Normal mode), 29dB (Quiet mode)

Environmental Consider- ations

Operational Temperatures : 41 to 104F (5 to 40C), (Quiet mode selected automatically at 95F to 104F / 35C to 40C) 20% to 80% humidity (non-condensing) Storage Temperatures : 14 to 122F (-10 to 50C), 20% to 80% humidity (non-condensing)

Regulations

For United States: UL Approved (UL 60950-1) Meets FCC Class B requirements

For Canada: UL Approved (CSA 60950-1) Meets DOC Canada Class B requirements

ForAustralia/NewZealand: MeetsAS/NZSCISPR.22ClassB

For Europe: Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) Meets Low Voltage Directive (EN60950-1)

The specifications are subject to change without notice.

79

7. Appendix

Cabinet Dimensions

lens center

lens center

Unit: mm (inch)

80 (3.2")

317 (12.5")

3 3

6 (1

3 .2

")

11 5

(4 .5

")

55 (

2. 2"

)

80

Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub ANALOG IN-1 Input Connector

Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level

1

11 1512 1413 6

5432 107 98

7. Appendix

Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y Ground 8 Blue Ground Cb Ground 9 No Connection 10 Sync Signal Ground 11 No Connection 12 Bi-directional DATA (SDA) 13 Horizontal Sync or Composite Sync 14 Vertical Sync 15 Data Clock

81

7. Appendix

Compatible Input Signal List Horizontal: 15KHz to 100KHz (RGB: 24KHz or over) Vertical: 50Hz to 120Hz

Signal Resolution

(Dots) Frequency H.

(kHz) Refresh Rate

(Hz) VIDEO NTSC - * 15.7 59.9

PAL - * 15.6 50.0 PAL60 - * 15.7 60.0 SECAM - * 15.6 50.0

VGA 640 480 31.5 59.9 640 480 31.5 60.0 640 480 37.9 72.8 640 480 37.5 75.0 640 480 39.4 75.0 640 480 43.3 85.0

SVGA 800 600 35.2 56.3 800 600 37.9 60.3 800 600 48.1 72.2 800 600 46.9 75.0 800 600 53.7 85.1

XGA 1024 768 48.4 60.0 1024 768 56.5 70.1 1024 768 60.0 75.0 1024 768 68.7 85.0

WXGA 1280 768 47.8 59.9 1280 800 49.7 59.8

- 1152 864 54.4 60.1 1152 864 64.0 70.0 1152 864 67.5 75.0 1152 864 * 77.5 85.1

- 1280 960 60.0 60.0 1280 960 * 75.0 75.0 1280 960 * 85.9 85.0

SXGA 1280 1024 64.0 60.0 1280 1024 * 80.0 75.0 1280 1024 * 91.2 85.0

SXGA+ 1400 1050 64.7 60.0 1400 1050 * 65.3 60.0

WXGA+ 1440 900 * 55.9 59.9 UXGA 1600 1200 * 75.0 60.0

1600 1200 * 81.3 65.0 1600 1200 * 87.5 70.0 1600 1200 * 93.8 75.0

MAC13 640 480 35.0 66.7 MAC16 832 624 49.7 74.6 MAC19 1024 768 60.2 74.9 MAC21 1152 870 68.7 75.1 MAC 1280 1024 64.3 60.4

1280 1024 * 69.9 65.2 1280 1024 * 78.4 73.7

HDTV 1080i/60 1920 1080 33.8 60.0 1080i/50 1920 1080 28.1 50.0 720p 1280 720 45.0 60.0

DVD 480i 720 480 * 15.7 59.9 576i 720 576 * 15.6 50.0 480p 720 480 31.5 59.9 576p 720 576 31.3 50.0

NOTE: Imagesaboveflaggedwith*arenotsupportedbydigitalsignal. Animagewithhigherorlowerresolutionthantheprojectorsnativeresolution(LV-7385/LV-7380/LV-7285/LV-7280:1024x768 /LV-8310/LV-8215:1280x800)willbedisplayedwithscalingtechnology.

Somecompositesyncsignalsmaynotbedisplayedcorrectly. Signals other than those specified in the table above may not be displayed correctly. If this should happen, change the refresh rateorresolutiononyourPC.RefertoDisplayPropertieshelpsectionofyourPCforprocedures.

82

7. Appendix

Relationship between Screen Size and Projection distance

LV-7385/LV-7380/LV-7285/LV-7280 Screen size at 4:3

aspect ratio WD(cm)

Zoomedprojectiondis- tance H1 H2

Screen size at 16:10 aspect ratio WD(cm)Max. Min.

21 43 32 - 0.8m (2.6')

27cm (0.9')

5cm (0.2')

20 43 27

25 51 38 0.8m (2.6')

0.9m (3.0')

32cm (1.1')

6cm (0.2')

24 51 32

30 61 46 0.9m (3.0')

1.1m (3.6')

39cm (1.3')

7cm (0.2')

28 61 38

40 81 61 1.2m (3.9')

1.5m (4.9')

51cm (1.7')

10cm (0.3')

38 81 51

50 102 76 1.5m (4.9')

1.9m (6.2')

64cm (2.1')

12cm (0.4')

47 102 64

60 122 91 1.9m (6.2')

2.2m (7.2')

77cm (2.5')

14cm (0.5')

57 122 76

70 142 107 2.2m (7.2')

2.6m (8.5')

90cm (3.0')

17cm (0.5')

66 142 89

80 163 122 2.5m (8.2')

3.0m (9.8')

103cm (3.4')

19cm (0.6')

76 163 102

90 183 137 2.8m (9.2')

3.4m (11.2')

116cm (3.8')

21cm (0.7')

85 183 114

100 203 152 3.1m

(10.2') 3.7m (12.1')

129cm (4.2')

24cm (0.8')

94 203 127

110 224 168 3.4m (11.2')

4.1m (13.5')

141cm (4.6')

26cm (0.9')

104 224 140

120 244 183 3.7m (12.1')

4.5m (14.8')

154cm (5.1')

29cm (0.9')

113 244 152

130 264 198 4.0m (13.1')

4.9m (16.1')

167cm (5.5')

31cm (1.0')

123 264 165

140 285 213 4.4m (14.4')

5.2m (17.1')

180cm (5.9')

33cm (1.1')

132 285 178

150 305 229 4.7m

(15.4') 5.6m (18.4')

193cm (6.3')

36cm (1.2')

142 305 191

160 325 244 5.0m (16.4')

6.0m (19.7')

206cm (6.8')

38cm (1.3')

151 325 203

170 345 259 5.3m (17.4')

6.4m (21.0')

219cm (7.2')

41cm (1.3')

160 345 216

176 358 268 5.5m (18.0')

6.6m (21.7')

226cm (7.4')

42cm (1.4')

166 358 224

180 366 274 5.6m (18.4')

6.8m (22.3')

231cm (7.6')

43cm (1.4')

170 366 229

190 386 290 5.9m (19.4')

7.1m (23.3')

244cm (8.0')

45cm (1.5')

179 386 241

200 406 305 6.2m

(20.3') 7.5m

(24.6') 257cm (8.4')

48cm (1.6')

189 406 254

210 427 320 6.6m (21.7')

7.9m (25.9')

270cm (8.9')

50cm (1.6')

198 427 267

220 447 335 6.9m

(22.6') 8.3m (27.2')

283cm (9.3')

52cm (1.7')

208 447 279

230 467 351 7.2m

(23.6') 8.6m

(28.2') 296cm (9.7')

55cm (1.8')

217 467 292

240 488 366 7.5m

(24.6') 9.0m

(29.5') 309cm (10.1')

57cm (1.9')

226 488 305

250 508 381 7.8m

(25.6') 9.4m

(30.8') 321cm (10.5')

60cm (2.0')

236 508 318

260 528 396 8.1m

(26.6') 9.8m

(32.2') 334cm (11.0')

62cm (2.0')

245 528 330

270 549 412 8.4m (27.6')

10.1m (33.1')

347cm (11.4')

64cm (2.1')

255 549 343

280 569 427 8.8m

(28.9') 10.5m (34.5')

360cm (11.8')

67cm (2.2')

264 569 356

290 589 442 9.1m

(29.9') 10.9m (35.8')

373cm (12.2')

69cm (2.3')

274 589 368

300 610 457 9.4m

(30.8') 11.3m (37.1')

386cm (12.7')

71cm (2.3')

283 610 381

83

7. Appendix

LV-8310/LV-8215 Screen size at 16:10

aspect ratio WD(cm)

Zoomedprojectiondis- tance H1 H2

Screen size at 4:3 aspect ratio WD(cm)Max. Min.

21 45 28 - 0.8m (2.6)

26cm (0.8)

2cm (0.1)

19 38 28

25 54 34 0.8m (2.6)

1.0m (3.2)

31cm (1.0)

3cm (0.1)

22 45 34

30 65 40 1.0m (3.2)

1.2m (3.8)

37cm (1.2)

4cm (0.1)

26 54 40

40 86 54 1.3m (4.2)

1.6m (5.1)

49cm (1.6)

5cm (0.2)

35 72 54

50 108 67 1.6m (5.3)

2.0m (6.4)

61cm (2.0)

6cm (0.2)

44 90 67

60 129 81 2.0m (6.4)

2.4m (7.7)

74cm (2.4)

7cm (0.2)

53 108 81

70 151 94 2.3m (7.5)

2.8m (9.1)

86cm (2.8)

8cm (0.3)

62 126 94

80 172 108 2.6m (8.6)

3.2m (10.4)

98cm (3.2)

9cm (0.3)

71 144 108

90 194 121 3.0m (9.7)

3.6m (11.7)

111cm (3.6)

11cm (0.3)

79 162 121

100 215 135 3.3m (10.8)

4.0m (13.0)

123cm (4.0)

12cm (0.4)

88 179 135

110 237 148 3.6m (11.9)

4.4m (14.3)

135cm (4.4)

13cm (0.4)

97 197 148

120 258 162 4.0m

(13.0) 4.8m

(15.6) 147cm (4.8)

14cm (0.5)

106 215 162

130 280 175 4.3m

(14.1) 5.2m

(16.9) 160cm (5.2)

15cm (0.5)

115 233 175

140 302 188 4.6m

(15.2) 5.6m

(18.2) 172cm (5.6)

16cm (0.5)

124 251 188

150 323 202 5.0m

(16.3) 6.0m

(19.5) 184cm (6.0)

18cm (0.6)

132 269 202

160 345 215 5.3m (17.4)

6.4m (20.9)

197cm (6.4)

19cm (0.6)

141 287 215

170 366 229 5.6m

(18.4) 6.8m

(22.2) 209cm (6.9)

20cm (0.7)

150 305 229

176 379 237 5.8m

(19.1) 7.0m

(23.0) 216cm (7.1)

21cm (0.7)

155 316 237

180 388 242 6.0m

(19.5) 7.2m

(23.5) 221cm (7.3)

21cm (0.7)

159 323 242

190 409 256 6.3m

(20.6) 7.6m

(24.8) 233cm (7.7)

22cm (0.7)

168 341 256

200 431 269 6.6m (21.7)

8.0m (26.1)

246cm (8.1)

24cm (0.8)

177 359 269

210 452 283 7.0m

(22.8) 8.4m (27.4)

258cm (8.5)

25cm (0.8)

185 377 283

220 474 296 7.3m

(23.9) 8.8m

(28.7) 270cm (8.9)

26cm (0.9)

194 395 296

230 495 310 7.6m

(25.0) 9.2m

(30.0) 283cm (9.3)

27cm (0.9)

203 413 310

240 517 323 8.0m

(26.1) 9.6m (31.3)

295cm (9.7)

28cm (0.9)

212 431 323

250 538 337 8.3m (27.2)

10.0m (32.7)

307cm (10.1)

29cm (1.0)

221 449 337

260 560 350 8.6m

(28.3) 10.4m (34.0)

319cm (10.5)

31cm (1.0)

230 467 350

270 582 363 9.0m

(29.4) 10.8m (35.3)

332cm (10.9)

32cm (1.0)

238 485 363

280 603 377 9.3m

(30.5) 11.2m (36.6)

344cm (11.3)

33cm (1.1)

247 503 377

290 625 390 9.6m (31.6)

11.6m (37.9)

356cm (11.7)

34cm (1.1)

256 521 390

300 646 404 9.9m

(32.6) 12.0m (39.2)

369cm (12.1)

35cm (1.2)

265 538 404

84

7. Appendix

PC Control Codes and Cable Connection PC Control Codes

NOTE:ContactyourlocaldealerforafulllistofthePCControlCodesifneeded.

Cable Connection Communication Protocol

Baud rate .........................................19200 bps Data length ......................................8 bits Parity ...............................................No parity Stop bit ............................................One bit X on/off ...........................................None Communications procedure............Full duplex

NOTE:Dependingontheequipment,alowerbaudratemayberecommendedforlongcableruns.

SERVICE PORT Connector (D-SUB 9P)

Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT Computer 1 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT Computer 2 (Digital) 02H 03H 00H 00H 02H 01H 1AH 22H INPUT SELECT Computer 2 (Analog) 02H 03H 00H 00H 02H 01H 02H 0AH INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H BLANK ON 02H 10H 00H 00H 00H 12H BLANK OFF 02H 11H 00H 00H 00H 13H SOUND MUTE ON 02H 12H 00H 00H 00H 14H SOUND MUTE OFF 02H 13H 00H 00H 00H 15H

NOTE1:Pins1,4,6and9arenoused.

NOTE2:JumperRequesttoSendandCleartoSendtogetheronbothendsofthecabletosimplifycableconnection.

NOTE3:Forlongcablerunsitisrecommendedtosetcommunicationspeedwithinprojectormenusto9600bps.

1 52 43

6 7 98

to gnd of PC

to rxd of PC

to txd of PC

to rts of PC

to Cts of PC

85

Remote control does not work. No obstacles between the sensor of the projector and the remote control. Projector is placed near a fluorescent light that can disturb the infrared remote controls. Batteries are new and are not reversed in installation.

Image is flickering. Still unchanged even though you press the AUTO PC button. Still unchanged even though you carry out Reset in the projectors menu. Image shows flickering or color drift on a computer signal. Still unchanged even though you change [Fan mode] from [High altitude] to [Auto].

7. Appendix

Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed, you may also refer to the Troubleshooting section in your users manual. This checklist below will help us solve your problem more efficiently. * Print the following pages.

No image is displayed from your PC or video equipment to the projector.

Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PCs signal output to the projector. A combinationof function keyswill enable/disable the externaldisplay.Usually,thecombinationoftheFnkey alongwithoneofthe12functionkeysturnstheexternal display on or off.

No image (blue background, logo, no display). Still no image even though you press the AUTO PC button.

Still no image even though you carry out Reset in the projectors menu. Signal cable's plug is fully inserted into the input connector A message appears on the screen. ( _____________________________________________ ) The source connected to the projector is active and available. Still no image even though you adjust the brightness and/ or the contrast. Input source's resolution and frequency are supported by the projector.

Frequency of occurrence always sometimes (How often? _____________________) other ( __________________ ) Power

No power (POWER indicator does not light green) See also STATUS Indicator.

Power cord's plug is fully inserted into the wall outlet. Main power switch is pressed to the ON position. Lamp cover is installed correctly . Lamp counter (lamp operation hours) was cleared after lamp replacement. No power even though you press and hold the POWER but- ton for a minimum of 1 second.

Shut down during operation. Power cord's plug is fully inserted into the wall outlet. Lamp cover is installed correctly . Power Management is turned off (only models with the Power Management function). Off timer is turned off (only models with the Off timer func- tion).

Video and Audio

Image is too dark. Remains unchanged even though you adjust the brightness and/or the contrast.

Image is distorted. Image appears to be trapezoidal (unchanged even though you carry out the Keystone adjustment).

Parts of the image are lost. Still unchanged even though you press the AUTO PC button.

Still unchanged even though you carry out Reset in the projectors menu.

Image is shifted in the vertical or horizontal direction. Horizontal and vertical positions are correctly adjusted on a computer signal. Input source's resolution and frequency are supported by the projector. Some pixels are lost.

Image appears blurry or out of focus. Still unchanged even though you checked the signals resolu- tion on PC and changed it to projectors native resolution. Still unchanged even though you adjusted the focus.

No sound. Audio cable is correctly connected to the audio input of the projector. Still unchanged even though you adjusted the volume level. AUDIO OUT is connected to your audio equipment (only models with the AUDIO OUT connector).

Other Buttons on the projector cabinet do not work ( only models with the Key lock function).

Key lock is not turned on or is disabled in the menu. Still unchanged even though you press and hold the BACK button for a minimum of 10 seconds.

86

7. Appendix

In the space below please describe your problem in detail.

Information on application and environment where your projector is used

Projector

Model name: Serial No.: Date of purchase: Lamp operating time (hours): Lamp Mode: Normal Quiet Information on input signal:

Horizontal sync frequency [ ] kHz Vertical sync frequency [ ] Hz Sync polarity H (+) () V (+) () Sync type Separate Composite

Sync on Green STATUS Indicator:

Steady light Orange Green Flashing light [ ] cycles

Remote control model number:

Signal cable

Canon standard or other manufacturers cable? Model number: Length: inch/m

Distribution amplifier Model number:

Switcher Model number:

Adapter Model number:

Projector PC

audio-video equipment

Installation environment

Screen size: inch Screen type: White matte Beads Polarization Wide angle High contrast Throw distance: feet/inch/m Orientation: Ceiling mount Desktop Power outlet connection:

Connected directly to wall outlet

Connected to power cord extender or other (the number of connected equipment ______________)

Connected to a power cord reel or other (the num- ber of connected equipment ______________)

Computer

Manufacturer:

Model number:

Notebook PC / Desktop

Native resolution:

Refresh rate:

Video adapter:

Other:

Audio-video equipment

VCR, DVD player, Video camera, Video game or other

Manufacturer:

Model number:

000 CANON INC. 2010

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042- 1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON

CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Cte-de-Liesse, Montral Qubec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada For all inquiries concerning this product, call toll free in Canada 1-800-OK-CANON

EUROPE, AFRICA & MIDDLE EAST CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom CANON EUROPA N.V. Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands CANON FRANCE S.A.S 17, quai du President Paul Doumer, 92414 Courbevoie Cedex, France CANON UK LTD. Woodhatch Reigate Surrey RH2 8BF, United Kingdom CANON DEUTSCHLAND GmbH Europark Fichtenhain A10, 47807 Krefeld, Germany CANON ITALIA S.p.A. Via Milano 8 I-20097 San Donato Milanese, Milano, Italy CANON Schweiz AG Geschftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland CANON GMBH Zetschegasse 11, A-1230 Wien, Austria CANON Espaa, S.A. C/Joaqun Costa, 41, 28002 Madrid, Spain

CANON PORTUGAL S.A. Rua Alfredo da Silva, 14 Alfragide 2610-016 Amadora, Portugal CANON Belgium N.V./S.A. Berkenlaan 3, 1831 Diegem (Mechelen), Belgium CANON Netherland NV Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands CANON LUXEMBOURG S.A. Rue des Joncs 21, L-1818 Howald, Luxembourg CANON DANMARK A/S Knud Hoejgaards Vej 1 DK-2860 Soeborg, Dan- mark CANON OY Huopalahdentie 24 PL 1 00351 Helsinki, Finland CANON SVENSKA AB Gustav III:s Boulevard 26 169 88 Solna, Sweden CANON NORGE as Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway

CENTRAL & SOUTH AMERICA CANON LATIN AMERICA, INC. 703 Waterford Way, Ste. 400 Miami, FL 33126, U.S.A.

ASIA CANON (China) Co., Ltd. 15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China CANON HONGKONG CO., LTD. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong CANON SINGAPORE PTE. LTD. 1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632 CANON KOREA CONSUMER IMAGING INC. Gangnam Finance Center 17F,737,Yeoksam- Dong, Gangnam-gu, Seoul, 135-984, Korea

OCEANIA CANON AUSTRALIA PTY. LTD. 1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia CANON NEW ZEALAND LTD. Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand

Manualsnet FAQs

If you want to find out how the LV-7385 Canon works, you can view and download the Canon LV-7385 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Canon LV-7385 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Canon LV-7385. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon LV-7385 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon LV-7385 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon LV-7385 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon LV-7385 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon LV-7385 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.