Contents

Canon LV-7250 User's Manual PDF

Pages 77
Year 2006
Language(s)
English en
1 of 77
1 of 77

Summary of Content for Canon LV-7250 User's Manual PDF

Page 3

This symbol indicates that this product is not to be disposed of with your household waste, ac- cording to the WEEE Directive (2002/96/EC) and your national law... This product should be handed over to a designated collection point, e... g... , on an authorized one-for-one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE)... Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE... At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources... For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service... Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources and will avoid incurring administrative sanctions according to art... 50 and following of Italian legislative decree 22/97... For more information regarding return and recycling of WEEE products, please visit www... canon-europe... com/environment... (EEA: Norway, Iceland and Liechtenstein)

Page 4

IF A LAMP EXPLODES If a lamp explodes, the gas and broken shards may scatter inside the projector and they may come out of the exhaust vent... The gas contains toxic mercury... Open windows and doors for ventilation... If you inhale the gas or the shards of the broken lamp enter your eyes or mouth, consult the doctor immediately... If a lamp explodes, its shards may scatter inside the projector... Ask the Canon service representative to clean and check the inside of the projector and replace the lamp...

Page 5

Prevent foreign objects such as paper clips and bits of paper from falling into your projector... Do not attempt retrieve any objects that might fall into your projector... Do not insert any metal objects such as a wire or screw- driver into your project... If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel...

Page 6

Keep any items such as magnifying glass out of the light path of the projector... The light being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes...

Page 7

Use Caution When Carrying or Transporting the Projector The carrying bag is intended for protection from dust and scratches on the surface of the cabinet, and it is not de- signed to protect the projector from external shocks... When carrying the projector with it put in the carrying bag, do not give a shock to it, drop it, or place anything on it... Do not transport the projector through a courier or transport service with the carrying bag... The projector can damage...

Page 8

Note on Startup Screen (Menu Language Select screen) ... 21 Selecting a Source ... 22 Adjusting the Picture Size and Position ... 23 Correcting Keystone Distortion ... 25 Automatically Optimizing on RGB Image ... 27 Turning Up or Down Volume ... 27 Turning off the Projector ... 28 After Use... 29

Page 9

5... Using On-Screen Menu ... 36 Using the Menus... 36 Menu Elements ... 38 List of Menu Items ... 39 Menu Descriptions & Functions [Image adjustment] ... 41 Menu Descriptions & Functions [Display settings] ... 42 Menu Descriptions & Functions [Setup] ... 44 Menu Descriptions & Functions [Information] ... 49 Menu Descriptions & Functions [Reset] ... 50

Page 10

What's in the Box? Make sure your box contains everything listed... If any pieces are missing, contact your dealer... Please save the original box and packing materials if you ever need to ship your projector...

Page 11

Quick start & quick cool down Eight seconds after turning on the power, the projector is ready to display PC or video images... Powering down; The fans stop 30 seconds after turning off the power from the remote control or cabinet control panel... The projector can be put away immediately after the projector is powered down... Also, the main power of the projector can be turned off by pressing the main power switch or unplugging the power cable even during the cool down period after the projector is turned off...

Page 12

About this user's manual The fastest way to get started is to take your time and do everything right the first time... Take a few minutes now to review the user's manual... This may save you time later on... At the beginning of each section of the manual you'll find an overview... If the section doesn't apply, you can skip it...

Page 13

Main Power Switch When you plug the supplied power cord into an active wall outlet and turn on the Main Power, the POWER indicator turns orange and the projector is in standby mode... (See page 20)

Page 14

HINT: The Canon logo is on the panel of the projector cabinet ... When projecting an image with the projector hung from the ceiling, turn the Canon logo upside down...

Page 15

Detecting the Signal Automatically Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next avail- able input source... Each time you press and hold the INPUT button for a minimum of 2 seconds, the input source will change as follows: Computer 1* Computer 2* Video S-Video Computer1 ... * Computer on LV-X6

Page 16

5... AUDIO OUT Mini Jack (Stereo Mini) You can use this jack to output sound from the cur- rently selected source (COMPUTER, VIDEO or S- VIDEO)... Output sound level can be adjusted in accor- dance with the sound level of the internal speaker... Note that this cannot be used as a headphone jack... (When audio equipment is connected, the projector speaker is disabled... ) When a cable mini-plug is inserted into this jack, both the right and left audio signals are not mixed, but sepa- rate... For example, when a cable mini-plug is inserted into the left AUDIO IN jack only, only left sound is output...

Page 17

5... INPUT Button Selecting from INPUT List Press and quickly release the INPUT button to dis- play the INPUT list... Each time the INPUT button is pressed, the input source will change as follows: "Com- puter 1*", "Computer 2*", "Video" (VCR or laser disc player), "S-Video", To display the selected source, press the OK button or allow 2 seconds to elapse...

Page 18

16... PAGE / Button (Not available on LV-X6) Use these buttons to operate your computer with the supplied remote mouse receiver... See page 32... You can use these buttons to scroll the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer...

Page 19

Remote Control Precautions Handle the remote control carefully... If the remote control gets wet, wipe it dry immediately... Avoid excessive heat and humidity... Do not heat, take apart, or throw batteries into fire... Ensure that you have the batteries' polarity (+/-) aligned correctly... If you will not be using the remote control for a long time, remove the batteries... Do not place the batteries upside down... Do not use new and old batteries together, or use different types of batteries together... Dispose of used batteries according to your local regulations...

Page 20

NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector... When moving the projector or when it is not in use, cover the lens with the lens cap...

Page 21

NOTE: This projector can be hung from the ceiling (Ceiling mounted) with it turned up side down... When a translucent screen is used, the projector can project an image from behind the screen (Rear)... When the projector is hung from the ceiling or projector projects an image from behind the screen, the image must be inverted vertically or horizontally... See page 46... When hanging the projector from the ceiling, optional brackets (part No... LV-CL11) are required...

Page 22

Reflecting the Image Using a mirror to reflect your projector's image enables you to enjoy a much larger image... Contact your dealer if you need a mirror system... If you're using a mirror sys- tem and your image is inverted, use the MENU and SELECT buttons on your projector cabinet or your remote control to correct the orientation... See page 46...

Page 23

Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC... In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up... * If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power

Page 24

From the menu, select [Setup] [Input signal select] [Computer-1 ([Computer] on LV-X6 )] [SCART]... Scart is a standard European audio-visual connector for TVs, VCRs and DVD players... It is also referred to as Euro- connector...

Page 25

NOTE: The signal from the ANALOG-2 IN connector cannot be output from the MONITOR OUT connector on LV-7250... The LV-X6 does not have the AUDIO OUT connector... Use an audio cable without a built-in resistor... Using an audio cable with a built-in resistor turns down the sound...

Page 26

A component signal will be automatically displayed... If not, from the menu, select [Setup] [Input signal select] [Computer-1 ([Computer] on LV-X6 )] [COMPONENT]...

Page 27

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter...

Page 28

Connecting the Supplied Power Cord Connect the supplied power cord to the projector... First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet...

Page 29

NOTE: If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans runs without displaying an image for some time and then the projector will display the image...

Page 30

Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu... This menu gives you the opportunity to select one of the 8 menu languages...

Page 31

Selecting from INPUT List Press and quickly release the INPUT button on the projector cabinet to display the Source list... Each time the INPUT button is pressed, the input source will change as follows: "Computer 1", "Computer 2 (LV-7250 only)", "Video" (VCR or laser disc player), "S-Video", To display the selected source, allow 1 second to elapse...

Page 32

4... Release the adjustable tilt foot lock button to lock the adjustable tilt foot... There is approximately 10 degrees (up) of adjustment for the front of the projector... Adjusting the height of a projected image or changing projection angle will run the Auto Keystone correction function to quickly correct the vertical distortion... The "Keystone" screen will be displayed... For operating the "Keystone" screen, see " Correcting Keystone Distortion" on page 25...

Page 33

Zoom Use the ZOOM lever to finely adjust the im- age size on the screen...

Page 34

NOTE: When the menu is displayed, the above operation is not available... When the menu is displayed, press the MENU button to display the menu and start the Keystone correction from the menu... From the menu, select [Setup] [General] [Keystone adjustment]... The changes can be saved with [Keystone save]... (page 44)

Page 35

use the Auto Keystone within an angle of +/- 10 degrees... The Auto Keystone correction will take effect in 2 seconds after changing the projection angle during projection... The left and right (horizontal) keystone correction is not available... Place the projector so that the lens surface is parallel to the screen... The rear feet of the projector can be adjusted to level the projector...

Page 36

Press the AUTO PC button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer- ing)... This function adjusts the clock frequencies that eliminate the horizontal banding in the image... This function also adjusts the clock phase to reduce video noise, dot interference or cross talk... (This is evident when part of your image appears to be shimmering... ) This adjustment may be necessary when you connect your computer for the first time...

Page 37

TIP: The main power of the projector can be turned off by pressing the main power switch or by unplugging the power cord even during the cool down period after the projector is turned off...

Page 38

CAUTION: Use caution when putting the projector in the soft case immediately after the projector has been operating... The projector cabinet is hot...

Page 39

4... Convenient Features Turning off the Image and Sound Press the NO SHOW button to turn off the image and sound for a short period of time... Press again to restore the image and sound...

Page 40

Remote Control Precautions Handle the remote control carefully... If the remote control gets wet, wipe it dry immediately... Avoid excessive heat and humidity... Do not heat, take apart, or throw batteries into fire... Ensure that you have the batteries' polarity (+/-) aligned correctly... If you will not be using the remote control for a long time, remove the batteries... Do not place the batteries upside down... Do not use new and old batteries together, or use different types of batteries together... Dispose of used batteries according to your local regulations...

Page 41

About Drag Mode By pressing the L-CLICK or R-CLICK button for 2 or 3 seconds then releasing, the drag mode is set and the drag operation can be performed simply by pressing the SELECT button... To drop the item, press the L-CLICK (or R-CLICK) button... To cancel it, press the R-CLICK (or L-CLICK) button...

Page 42

Preventing the Unauthorized Use of the Projector A password can be set for your projector to avoid operation by an unauthorized user using the Menu... When a pass- word is set, turning on the projector will display the password input screen... Unless the correct password is entered, the projector cannot project an image...

Page 43

2... Press and hold the POWER button for about 1 second... The projector will be turned on and display a message to the effect that the projector is password-protected...

Page 44

NOTE: If you forget your password, contact your dealer... The [Password] setting cannot be cancelled by using the [Reset] of the menu...

Page 45

2... Press the SELECT or button on the remote control or the projector cabinet to highlight the menu for the item you want to adjust or set...

Page 46

triangle indicates the item is active... (1) Use the SELECT button to select the item... (2) Use the SELECT buttons to highlight the item you want to set... (3) Press the OK button... The selected item will be displayed...

Page 47

Title ... Indicates the menu title... Highlight ... Indicates the selected menu or item... Source ... Indicates the currently selected source... Remaining countdown time ... Indicates the remaining countdown time when the Off Timer is preset... Solid triangle ... Indicates further choices are available... A highlighted triangle indicates the item is active... Tab ... Indicates a group of features in a dialog box... Selecting on any tab brings its page to the front... Radio button ... Use this round button to select an option in a display box... Slide bar ... Indicates settings or the direction of adjustment... Key symbol ... Indicates the Key Lock is enabled... Thermometer symbol ... Indicates the lamp is forcibly being cooled down because the internal temperature is too high...

Page 48

Input signal select Computer 1 (LV-7250) RGB/COMPONENT RGB/COMPONENT, RGB, COMPONENT, SCART Computer 2 (LV-7250) RGB/COMPONENT RGB/COMPONENT, RGB, COMPONENT Computer (LV-X6) RGB/COMPONENT RGB/COMPONENT, RGB, COMPONENT, SCART VIDEO Auto Auto, NTSC3... 58, NTSC4... 43, PAL, PAL-M,

Page 49

Input signal Source index Horizontal frequency Vertical frequency Input signal type RGB, Component, HDTV, SCART, VIDEO, S-VIDEO Video type NTSC, NTSC3... 58, NTSC4... 43, PAL, PAL-M, PAL-N, PAL60, SECAM, Sync type Separate Sync, Composite Sync, G-Sync Sync polarity Scan type Interlace, Progressive

Page 50

Cinema ... Select this to project a moving picture... A picture is projected with a high regard for color tone reproduction... Video ... Select this to project a regular picture such as TV program sRGB ... Select this when you want to project an image from a sRGBcompatible digital camera... An image is projected

Page 51

Brightness ... Adjusts the brightness level or the black level of the image... Contrast ... Adjusts the intensity of the image according to the incoming signal (White level of the image)... Sharpness ... Controls the detail of the image for Video (not valid for RGB)... Color level ... Increases or decreases the color saturation level (not valid for RGB)... Color balance ... Varies the color level from +/- green to +/-blue... The red level is used as reference... This adjustment is only

Page 52

Adjusting the Vertical Position of Image [Cinema position] (for Cinema in Aspect only) This feature adjusts the vertical position of the image when viewing video with Cinema aspect ratio selected... When [Cinema] is selected in [Aspect], the image is displayed with black borders on the top and bottom... You can adjust the vertical position between top and bottom...

Page 53

Selecting Wall Color Correction Mode [Screen color] This function allows for quick adaptive color correction in applications where the screen material is not white... The following nine options are available: Off, Greenboard, Greenboard (Gray), Light yellow, Light green, Light blue, Sky blue, Light rose and Pink...

Page 54

mode to protect the projector... This is called forced cooling operation... When the projector is in a forced cooling operation, the picture brightness decreases... When the projector comes back to normal temperature, the Lamp mode returns to Normal mode... Thermometer symbol [ ] indicates the lamp mode is automatically set to a forced cooling operation because the internal temperature is too high... In this condition, changing [Lamp mode] setting in the menu will not affect the actual lamp mode and the LAMP indicator lights green...

Page 55

Selecting Communication Speed [Communication speed] This feature sets the baud rate of the SERVICE PORT (Mini DIN 8 Pin)... It supports data rates from 4800 to 19200 bps... The default is 19200 bps... Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs)... Your selected communication speed will not be affected even when [Reset] is done from the menu...

Page 56

Enabling Direct Power ON [Direct power on] Turns the projector on automatically when the power cable is inserted into an active power outlet... This eliminates the need to always use the POWER button on the remote control or projector cabinet... To use the [Direct power on] function, you must first press the main power switch to the position On (I) before plugging the power cable...

Page 57

Selecting Signal Format [Computer], [Computer 1], [Computer 2] Allows you to choose [RGB] for an RGB source such as a computer, or [COMPONENT] for a component video source such as a DVD player... Normally select [RGB/COMPONENT] and the projector automatically detects a component signal... However there may be some component signals that the projector is unable to detect... If this is the case, select [COMPONENT]... Select [SCART] in [Computer 1] (Computer on LV-X6) for the European Scart signal...

Page 58

* The progress indicator shows the percentage of remaining bulb life... When the remaining lamp time reaches 0, the Remaining lamp time bar indicator changes from 0% to 100 Hours and starts counting down... If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode is set to Normal or Quiet...

Page 59

NOTE: The projector will turn off and go into standby mode after 2100* hours (up to 3100* hours in Quiet mode) of service... If this happens, press the INFO button on the remote control for ten seconds to reset the lamp clock back to zero... Do this only after replacing the lamp... * LV-X6: 3100 hours (up to 4100 hours in Quiet mode)...

Page 60

Cleaning or Replacing the Filter The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours of operation (more often in dusty conditions)... If the filter is dirty or clogged, your projector may overheat...

Page 61

NOTE: Do not wash the filter with soap and water... Soap and water will damage the filter membrane... Before replacing the filter, remove dust and dirt from the projector cabinet... Keep out dust and dirt during filter replacement...

Page 62

The projector will turn off and go into standby mode after 2100* (up to 3100* hours in Quiet mode) hours of service... If this happens, be sure to replace the lamp... If you continue to use the lamp after 2000* hours (up to 3000* hours in Quiet mode) of use, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case... Do not touch them as the pieces of glass may cause injury... If this happens, contact your dealer for lamp replacement...

Page 63

CAUTION: DO NOT TOUCH THE LAMP immediately after it has been used... It will be extremely hot... Before handling, turn the projector off, wait until the cooling fans stop, turn off the main power switch, disconnect the power cord and then allow at least 60 minutes for the lamp to cool...

Page 64

NOTE: When the lamp exceeds 2100* hours (up to 3100* hours in Quiet mode) of service, the projector cannot turn on and the menu is not displayed... If this happens, press the INFO... button on the remote control for ten seconds to reset the lamp clock back to zero... When the lamp time clock is reset to zero, the LAMP indicator goes out... * LV-X6: 3100 hours (up to 4100 hours in Quiet mode)...

Page 65

Normal Lamp has reached its end of life... Lamp replacement message will be displayed... Lamp has been used beyond its limit... The projector will not turn on until the lamp is replaced... Lamp mode is set to Quiet mode

Page 66

Ensure your cables are connected properly... Use menus to adjust the brightness and contrast... See page 42... Remove the lens cap... Reset the settings or adjustments to factory preset levels using the [Reset] in the Menu... See page 50... Enter your registered Password if the Password function is enabled... See page 33... When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning

Page 67

Displaying an image on the notebook PCs screen does not necessarily mean it outputs a signal to the projec- tor... When using a PC compatible laptop, a combination of function keys will enable/disable the external display... Usually, the combination of the Fn key along with one of the 12 function keys gets the external display to come on or off... For more details, refer to your computers owners manual...

Page 68

LV-X6: 1500 lm Uniformity 85% Image Size (Diagonal) 25" to 300" Projection Distance 1... 1 m to 8... 8 m / 3... 7' to 29... 1' Projection Angle Tele: 8... 3 - 8... 6/ Wide: 9... 9 - 10... 3 Keystone Correction +/- 30 Vertical (Auto keystone on LV-7250 only)

Page 69

Environmental Considerations Operational Temperatures : 41 to 104F (5 to 40C), (Quiet mode selected automatically at 95F to 104F / 35C to 40C) 20% to 80% humidity (non-condensing) Storage Temperatures : 14 to 122F (-10 to 50C), 20% to 80% humidity (non-condensing)

Page 71

1 Red Cr 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y Ground 8 Blue Ground Cb Ground 9 No Connection

Page 72

NTSC 15... 73 59... 94 PAL 15... 63 50... 00 PAL60 15... 73 60... 00 SECAM 15... 63 50... 00 VESA 640 480 31... 47 59... 94 IBM 640 480 31... 48 59... 95 MAC 640 480 35... 00 66... 67 VESA 640 480 37... 86 72... 81 VESA 640 480 37... 50 75... 00 IBM 640 480 39... 38 75... 00 VESA 640 480 43... 27 85... 01 IBM 720 350 31... 47 70... 08 IBM 720 350 39... 44 87... 85 IBM 720 400 39... 44 87... 85 VESA 800 600 35... 16 56... 25 VESA 800 600 37... 88 60... 32 VESA 800 600 48... 08 72... 19 VESA 800 600 46... 88 75... 00 VESA 800 600 53... 67 85... 06 MAC 832 624 49... 72 74... 55 VESA 1024 768 48... 36 60... 00 VESA 1024 768 56... 48 70... 07 MAC 1024 768 60... 24 74... 93 VESA 1024 768 60... 02 75... 03 VESA 1024 768 68... 68 85... 00

Page 73

5 cm (0... 2') 6 cm (0... 2') 9 cm (0... 3') 11 cm (0... 4') 13 cm (0... 4') 15 cm (0... 5') 17 cm (0... 6') 19 cm (0... 6') 22 cm (0... 7') 24 cm (0... 8') 26 cm (0... 9') 28 cm (0... 9') 30 cm (1... 0') 32 cm (1... 1') 35 cm (1... 1') 37 cm (1... 2') 38 cm (1... 3') 39 cm (1... 3') 41 cm (1... 4') 43 cm (1... 4') 45 cm (1... 5') 48 cm (1... 6') 50 cm (1... 6') 52 cm (1... 7') 54 cm (1... 8') 56 cm (1... 9') 58 cm (1... 9') 61 cm (2... 0') 63 cm (2... 1') 65 cm (2... 1')

Page 74

Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER-1 02H 03H 00H 00H 02H 01H 01H 09H (COMPUTER on LV-X6) INPUT SELECT COMPUTER-2 02H 03H 00H 00H 02H 01H 02H 0AH (LV-7250 only) INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H NO SHOW ON 02H 10H 00H 00H 00H 12H NO SHOW OFF 02H 11H 00H 00H 00H 13H SOUND MUTE ON 02H 12H 00H 00H 00H 14H SOUND MUTE OFF 02H 13H 00H 00H 00H 15H

Page 75

Still no image even though you carry out Reset in the projectors menu... Signal cable's plug is fully inserted into the input connector A message appears on the screen... ( _____________________________________________ ) The source connected to the projector is active and available... Still no image even though you adjust the brightness and/or the contrast... Input source's resolution and frequency are supported by the projector...

Page 76

Model number: Serial No... : Date of purchase: Lamp operating time (hours): Lamp Mode: Normal Quiet Information on input signal:

Page 77

CANON INC... 30- 2, Shimomaruko 3- chome, Ohta- ku, Tokyo 146- 8501, Japan CANON U... S... A... , INC... One Canon Plaza, Lake Success, NY 11042, U... S... A... CANON CANADA, INC... 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC... 703 Waterford Way Suite 400 Miami, Florida 33126 U... S... A... CANON MEXICANA, S... de R... L... de C... V... Boulevard Manuel Avila Camacho, No... 138 PB, Pisos 15, 16 y 17Col... Lomas de Chapultepec, CP 11000, Mexico D... F... , Mexico CANON EUROPA N... V... P... O... Box 2262, 1180 EG Amstelveen, The Netherlands CANON COMMUNICATION & IMAGE FRANCE S... A... 12 Rue De L'Industrie, 92414 Corbevoie, Cedex, France CANON (UK) LTD... Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom CANON DEUTSCHLAND GmbH Europark Fichtenhain A 10, 47807 Krefeld, Germany CANON ITALIA S... p... A... Via Milano, 8 San Donato M... se-20097 (MI), Italy CANON (Schweiz) A... G... Industriestrasse 12, 8305 Dietlikon, Switzerland CANON BELGIUM N... V... / S... A Bessenveldstraat 7, 1831 Diegem, Belgium CANON GmbH Zetschegasse 11, A- 1230 Wien, Austria CANON ESPANA S... A... C/ Joaquin Costa 41, 28002 Madrid, Spain CANON SVENSKA AB Gustav III:s, Boulevard 26, 169 88 Solna, Sweden CANON NORGE A/ S Hallagerbakken 110, P... O... Box 33, Holmlia, N-1201 Oslo, Norway CANON OY Huopalahdentie 24, P... O... Box 1, FIN- 00351 Helsinki, Finland CANON HONGKONG CO... , LTD... 19/F... , The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kln... , H... K... CANON SINGAPORE PTE... LTD... 1 HarbourFront Avenue #04-01, Keppel Bay Tower Singapore 098632 CANON AUSTRALIA PTY... LTD... 1 Thomas Holt Drive, North Ryde, Sydney, N... S... W... 2113, Australia CANON NEW ZEALAND LTD... Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand CANON DANMARK A/ S Knud Hoejgaards Vej 1, DK- 2860 Soeborg, Denmark

Manualsnet FAQs

If you want to find out how the LV-7250 Canon works, you can view and download the Canon LV-7250 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Canon LV-7250 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Canon LV-7250. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon LV-7250 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon LV-7250 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon LV-7250 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon LV-7250 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon LV-7250 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.