Contents

Canon Color imageCLASS MF9150c Starter Guide PDF

Download download
Canon Color imageCLASS MF9150c Starter Guide PDF
Canon Manual Canon Printer Manual Canon Color imageCLASS Manual Canon MF9150c Manual Canon Printer Starter Guide
Pages 60
Year 2008
Language(s)
English en
1 of 60
1 of 60

Summary of Content for Canon Color imageCLASS MF9150c Starter Guide PDF

Page 1

Starter Guide

Overview of Machine Functions

Set Up the Machine to Suit Your Purposes

Set Up the Machine

Set Up Computers and Software

Appendix

Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference.

Page 2

Overview of Machine Functions .................................................................................................................... 1 Manuals for the Machine..................................................................................................................................................... 1

1 Set Up the Machine to Suit Your Purposes .................................................................................................. 2 2 Set Up the Machine .......................................................................................................................................... 3

Items Included with the Machine ...............................................................................................................................3 Optional Items ........................................................................................................................................................................ 3

Install Toner Cartridges ...................................................................................................................................................4 Connect the LAN Cable ..................................................................................................................................................8

Compatible LAN Cables ....................................................................................................................................................... 8 Connect Power Cord and Turn on the Machine ....................................................................................................9 Start Setup Guide .........................................................................................................................................................10 Load Paper ........................................................................................................................................................................12

Optional Paper Drawer ......................................................................................................................................................15 Set Date and Time ..........................................................................................................................................................18 Make Fax Settings ...........................................................................................................................................................20

Register User Telephone Number and Unit Name ...................................................................................................21 Information About the Keys .............................................................................................................................................21 About Sender Information ...............................................................................................................................................23 Select the Receive Mode that Suits Your Needs .......................................................................................................24 About the Receive Modes .................................................................................................................................................24

Connect Telephone Cables .........................................................................................................................................27 If You Need to Use Pulse Dialing .....................................................................................................................................28

Adjust Color with Auto Gradation Correction ....................................................................................................29 Set Up Network Connection .......................................................................................................................................32

Set IP Address Manually ....................................................................................................................................................35 Finish Setup Guide .......................................................................................................................................................35

Change the Settings ...........................................................................................................................................................36 3 Set Up Computers and Software ................................................................................................................. 38

Types of Connection between Computers and the Machine .........................................................................38 About User Software CD-ROM ...................................................................................................................................39 Network Connection .....................................................................................................................................................41

Installation Procedure ........................................................................................................................................................41 Check Installation ................................................................................................................................................................47

USB Connection ..............................................................................................................................................................48 Installation Procedure ........................................................................................................................................................48 Check Installation ................................................................................................................................................................54

4 Appendix .......................................................................................................................................................... 55 System Requirements ........................................................................................................................................................55 Using the User Manual CD-ROM (e-Manual)..............................................................................................................55

Contents

Page 3

1

This manual describes how to set the required settings to set up the machine and install the software. After you set up the machine, you can use the functions described in the illustration shown bellow. For the details of each function, refer to the Basic Operation Guide and e-Manual.

OverviewofMachineFunctions

Starter Guide (This Document): Machine setup and software installation. Read this guide before operating this product. Basic Operation Guide: Basic operation features. e-Manual (located on the User Manual CD-ROM): Total operation features. (Also includes the Starter Guide contents and the Basic Operation Guide contents.)

ManualsfortheMachine

Unless otherwise mentioned, illustrations and screens used in this manual are those taken when no optional equipment is attached to the Color imageCLASS MF9170c/MF9150c/MF8450c. If there is any difference among the Color imageCLASS MF9170c, MF9150c and MF8450c, it is clearly indicated in the text for instance Color imageCLASS MF9170c Only.

Page 4

2

1 SetUptheMachinetoSuitYourPurposes

Determine which machine functions (Copy, Fax, Direct Print, Scan to Media, PC Print, PC Fax, Scan, E-Mail, I-Fax, Remote UI, Scan to File Server) you intend to use, and make the settings according to the flowchart below. For example, if you intend to use the copy function, you need to make the Required Settings.

Page 5

3

2 SetUptheMachine

Items Included with the Machine

Machine Toner Cartridge4 (black, yellow, cyan, magenta) (Stored in the machine)

Power Cord

Limited Warranty Notice Cartridge Warranty Unpacking Instruction Starter Guide (This Document) Basic Operation Guide UFRII LT/FAX User Software CD-ROM PCL User Software CD-ROM (Color imageCLASS MF9170c Only) User Manual CD-ROM Registration Card Power Switch Label

Telephone Cable Customize Labels

OptionalItems

Cassette Paper Drawer

Cassette Feeding Unit-AC1 Cassette Feeding Unit-AC1 Setup Instruction

Page 6

4

2 Set Up the Machine

Install Toner Cartridges

This section describes the installation procedure for the toner cartridges. If you have already removed all shipping tape and packing materials from the machine as described in the Unpacking the Machine instruction sheet, go to Connect the LAN Cable, on p. 8.

1 Open the front cover by using the handle (A).

The toner cartridges are installed in order of black, yellow, cyan, and magenta.

2 Place two sheets (B) of LTR paper on the transfer belt of the delivery feeder unit (A) and make sure that they do not move out of place.

Page 7

5

2 Set Up the Machine

When installing or removing the toner cartridges, be sure to place the papers on the transfer belt of the delivery feeder unit to protect the belt. Do not touch or place objects on the transfer belt (A) of the delivery feeder unit. The transfer belt comes with a self cleaning function so do not wipe the transfer belt even when toner can be seen attached to the belt. If the delivery feeder unit is broken or the transfer belt is damaged, this may result in misfeeds or deterioration in print quality.

3 Hold the blue tabs on the both sides of toner cartridge, and pull it horizontally.

Do not open the drum protective shutter (A).

Do not touch the high-voltage contact (A) or the electrical contacts (B), as this may result in damage to the printer.

4 Gently rock the toner cartridge 5 or 6 times to evenly distribute the toner inside.

If toner is not distributed evenly, this may result in deterioration in print quality. Make sure to carry out this procedure properly.

Page 8

6

2 Set Up the Machine

5 Place the toner cartridge on a flat surface, fold back the tab of the sealing tape (A) located at left side of the toner cartridge.

6 Remove the sealing tape (approx. 18 7/8 inch long) gently by hooking your finger into the tab and pulling it out straight in the direction of the arrow.

If the sealing tape is pulled out forcefully or stopped at midpoint, toner may spill out. If the toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. If toner is adhered to the removed seal, be careful not to dirty your hands or clothing by touching it. If your hands or clothes get dirty from touching the toner, wash them immediately in cold water. Do not use hot water. Doing so may cause the toner to set permanently.

7 Hook your finger into the tab and remove the packing material (A) located at right side of the toner cartridge.

8 Hold the toner cartridge properly by the blue tabs on the both sides with the arrowed side facing up.

Do not hold the toner cartridge in a manner that is not described in this procedure.

9 Align the guides (A) of the toner cartridge that you want to replace with the slots (B) to which the label of the same color is attached, then insert the cartridge until it stops.

Page 9

7

2 Set Up the Machine

10 After removing all the packing materials from each toner cartridge and installing the cartridges, remove the papers on the transfer belt of the delivery feeder unit.

When removing the paper, be careful not to touch or damage the transfer belt of the delivery feeder unit.

11 Close the front cover.

Be careful not to get your fingers caught. If the front cover does not close properly, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine.

Page 10

8

2 Set Up the Machine

Connect the LAN Cable Connect a LAN cable that is compatible with the LAN connector of this machine.

A category 5 of greater twisted pair LAN cable is compatible with the machine. Connect one end to the 10Base-T/100Base-TX port on the right side of the machine and the other end to a network router or a hub.

CompatibleLANCables

Page 11

9

2 Set Up the Machine

Connect Power Cord and Turn on the Machine

1 Connect the power cord to the rear socket on the back side of the machine and to the wall outlet, and press the [I] side of the main power switch (A) to ON.

Make sure all shipping tape/packing materials on the machine and tabs/tape on the toner cartridges have been removed. Do not connect the machine and the computer with a USB cable at this time. Connect the machine and the computer with a USB cable only during the software installation procedure. (A USB cable is not used when the machine is used via a network connection.) If you want to use the optional paper drawer, connect the Cassette Feeding Unit-AC1 to the machine before turning on the machine. (For instructions on how to connect the Cassette Feeding Unit-AC1, see Cassette Feeding Unit- AC1 Setup Instruction.)

2 The Setup Guide automatically appears on the display.

is displayed: Make sure that the front cover is closed properly. (See Install Toner Cartridges, on p. 4.)

is displayed: Make sure that the tabs are removed from the toner cartridges and toner cartridges are properly installed to the machine. (See Install Toner Cartridges, on p. 4.)

Page 12

10

2 Set Up the Machine

Start Setup Guide

The Setup Guide assists you in setting up the machine before using it.

When you turn on the machine for first time, the Setup Guide automatically starts on the display. Once the Setup Guide starts, it cannot be stopped. If you turn off the machine while using the Setup Guide, turn on the machine and start the Setup Guide again. Once you complete the Setup Guide, it does not start automatically when you turn on the machine. You can restart the Setup Guide afterward from the user mode. (See Change the Settings, on p. 36.)

Information About the Keys Press the Left/Right Any key to select the alternative key at the bottom of the display. Press [] [] [] [] to move the cursor position. Use (Scroll Wheel) to move the cursor position. Press [OK] to set the entry or to proceed to the next screen. Press [Back] to return to the previous screen.

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

The screen explains how to operate the Setup Guide using the keys on the operation panel. For details on the key operation, see Information About the Keys, above.

3 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Page 13

11

2 Set Up the Machine

Check that all the packing materials are removed from the main unit and the cartridges. If not, refer to the instruction sheet Unpacking the Machine and remove them all.

4 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

The auto obtain IP address function will enables the machine to get the IP address after connecting the LAN cable to the machine.

If the LAN cable has not been connected yet, connect it as described in Connect the LAN Cable, on p. 8. Connect the LAN cable when you use the machine to share with a group through the network. Connect the LAN cable even if you do not use the auto obtain IP address function, because your network environment requires the IP address to be set manually.

5 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Do not connect the USB cable at this point even if you use the machine as a local printer by directly connecting the machine to the computer.

During the software installation procedure, you can connect the USB cable. (When using the network function, the USB cable is not required.)

6 Make sure the following screen is displayed on the display.

Go to Load Paper, on p. 12.

If the toner cartridges have not been set in the machine or the tabs and tape have not been removed from the toner cartridges, the screen appears. You will need to finish the cartridge installation before you proceed. (See Install Toner Cartridges, on p. 4.)

Page 14

12

2 Set Up the Machine

Load Paper

This section describes the procedures for making paper and paper size settings in the Setup Guide. Animated screens are included with each step described in the Setup Guide.

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Pull out the paper drawer until it stops.

3 Hold the paper drawer with both hands and remove it from the machine.

Make sure to take the paper drawer out of the machine before loading paper. If paper is loaded while the paper drawer is partially pulled out, the paper drawer may fall, resulting in damage to the machine or personal injury.

4 Press [OK] to proceed to the Setup Guide.

5 Hold the lock release lever of the side paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. The side paper guides move together.

Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.

6 Press [OK] to proceed to the Setup Guide.

7 Hold the lock release lever of the rear paper guides (A) and slide the guides to the mark for the size of the paper to be loaded.

Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.

Page 15

13

2 Set Up the Machine

8 Press [OK] to proceed to the Setup Guide.

9 Fan the paper stack and even the edges.

10 Load the paper stack of the appropriate size with the print side facing up. Align the rear edge of the paper stack with the rear paper guide.

When loading paper, be careful not to cut your fingers on the edges of the paper. Make sure the paper stack does not exceed the load limit mark (A).

The paper drawer holds approximately 250 sheets of paper (20 lb (75 g/m2)).

11 Press [OK] to proceed to the Setup Guide.

12 Hold the paper drawer with both hands and set it back into the machine.

13 Push the paper drawer as far as it will go.

Be careful not to get your fingers caught. For details on loading paper in the stack bypass tray, see Introduction of the Machine, in the e-Manual. If you loaded a size and/or type of paper that is different from what you registered in the Setup Guide, you need to change the paper settings on the machine. See Change the Settings, on p. 36.

14 Press [OK] to proceed to the Setup Guide.

15 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Page 16

14

2 Set Up the Machine

16 Use [], [] or (Scroll Wheel) to select the paper size you loaded, then press [OK].

If you use inch size paper, press the left Any key to select

and the paper size you want to use.

17 Use [], [] or (Scroll Wheel) to select the paper type you loaded, then press [OK].

18 Make sure the following screen is displayed on the display.

Go to Set Date and Time, on p. 18.

If the Optional Paper Drawer is installed in the machine, this screen is not displayed. Go to Optional Paper Drawer, on p. 15.

Page 17

15

2 Set Up the Machine

OptionalPaperDrawer When the Optional Paper Drawer is installed in the machine, the procedure for setting up the Optional Paper Drawer displays on the Setup Guide.

1 Pull out the optional paper drawer until it stops.

2 Hold the optional paper drawer with both hands and remove it from the machine.

Make sure to take the optional paper drawer out of the machine before loading paper. If paper is loaded while the optional paper drawer is partially pulled out, the optional paper drawer may fall, resulting in damage to the machine or personal injury.

3 Press [OK] to proceed to the Setup Guide.

4 Hold the lock release lever of the side paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. The side paper guides move together.

Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.

5 Press [OK] to proceed to the Setup Guide.

6 Hold the lock release lever of the rear paper guides (A) and slide the guides to the mark for the size of the paper to be loaded.

Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.

Page 18

16

2 Set Up the Machine

7 Press [OK] to proceed to the Setup Guide.

8 Fan the paper stack and even the edges.

9 Load the paper stack of the appropriate size with the print side facing up. Align the rear edge of paper stack with the rear paper guide.

When loading paper, be careful not to cut your fingers on the edges of the paper. Make sure the paper stack does not exceed the load limit mark (A).

The optional paper drawer holds approximately 500 sheets of paper (20 lb (75 g/m2)).

10 Press [OK] to proceed to the Setup Guide.

11 Hold the optional paper drawer with both hands and set it back into the machine.

12 Push the paper drawer as far as it will go.

Be careful not to get your fingers caught. For details on loading paper in the stack bypass tray, see Introduction of the Machine, in the e-Manual. If you loaded a size and/or type of paper that is different from what you registered in the Setup Guide, you need to change the paper settings on the machine. See Change the Settings, on p. 36.

13 Press [OK] to proceed to the Setup Guide.

14 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Page 19

17

2 Set Up the Machine

15 Use [], [] or (Scroll Wheel) to select the paper size you loaded, then press [OK].

If you use inch size paper, press the left Any key to select
and the paper size you want to use.

16 Use [], [] or (Scroll Wheel) to select the paper type you loaded, then press [OK].

17 Use [], [] or (Scroll Wheel) to select or for setting the default paper drawer, then press [OK].

When you install paper drawer 2 (optional paper drawer) that is usually used for copying, select . If you selected , the default paper drawer (Standard mode of copy) will be the paper drawer 1 (paper drawer). (For details on the standard mode of copy, see Copy, in the e-Manual.)

18 Make sure the following screen is displayed on the display.

Go to Set Date and Time, on p. 18.

Page 20

18

2 Set Up the Machine

Set Date and Time

Before using the machine, you MUST set the current date and time. The date and time set are used as a standard for timer settings functions.

Information About the Keys Press (numeric keys) to enter numbers. Press [OK] to set the entry or to proceed to the next screen. Press [Back] to return to the previous screen. Press (Clear) to delete the entire entry.

1 Make sure the following screen displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Use (numeric keys) to enter the date (month/day/year) and time (in 24-hour/military time format), then press [OK].

Page 21

19

2 Set Up the Machine

3 Make sure the screen on the left is shown on the display.

Go to Make Fax Settings, p. 20.

By default, in the menu is set to . If you want to set to , see Change the Settings, on p. 36. In the next setting, you will set the fax setting. If you do not set the fax setting, select , then go to Adjust Color with Auto Gradation Correction, p. 29.

Page 22

20

2 Set Up the Machine

Make Fax Settings

This section describes the fax settings in the Setup Guide.

1 Make sure the following screen is displayed on the display. Use [], [] or (Scroll Wheel) to select or .

A: If you use the fax function, select then press [OK].

B: If you do not use the fax function, select , then press [OK]. (Go to Adjust Color with Auto Gradation Correction, p. 29.)

2 Make sure the following screen is displayed on the display.

Go to Register User Telephone Number and Unit Name, on p. 21.

Page 23

21

2 Set Up the Machine

RegisterUserTelephoneNumberandUnitName This section describes the procedure for registering the user telephone number and unit name. Refer to the Information About the Keys below.

Use the keys shown below to enter information in the machine.

You can enter the following characters in each input mode:

Press (numeric keys) to enter numbers. Press the Left/Right Any key to select the alternative key at the bottom of the display. Press [] [] [] [] to move the cursor position. Use (Scroll Wheel) to move the cursor position. Press [OK] to set the entry or to proceed to the next screen. Press [Back] to return to the previous screen.

For screens that require alphanumeric entries. Press [] [] [] [] and (Scroll Wheel) to move the highlighted cursor position.
: Alphanumeric character entry mode : Symbol entry mode Press [OK] to enter the highlighted character or space and to determine the entry mode. You can also use (numeric keys) to enter numbers. Select by pressing the left Any key to clear the entered characters one by one. Select by pressing the right Any key to complete the entry and return to the previous screen.

InformationAbouttheKeys

Page 24

22

2 Set Up the Machine

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Use (numeric keys) to enter your fax number (up to 20 digits). To confirm your entry, press the right Any key to select or use [], [] or (Scroll Wheel) to select register, then press [OK]. (For information on how to enter characters, see p. 21.)

Following keys are available by selecting with [], [] or (Scroll Wheel).

: Inserts a space. <+>: Inserts a plus sign. : Deletes the last number entered.

To delete all of the entered number, press (Clear).

3 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

4 Enter the unit name (your name, company name, etc.) using [], [], [], [] or (Scroll Wheel) to select the characters then press [OK] to enter. To confirm your entry, press right Any key to select . (For information on how to enter characters, see p. 21.)

You can register only one unit name. To delete the last entered characters, press the left Any key to select . To delete all of the entered characters, press (Clear).

Page 25

23

2 Set Up the Machine

Before sending documents, you MUST register your fax number, unit name, and the current date and time in the machine. The sender information you register in the machine appears in the header of each page received by the recipient.

AboutSenderInformation

5 Make sure the following screen is displayed on the display.

In the next setting, you will set the receive mode.

Page 26

24

2 Set Up the Machine

AbouttheReceiveModes

Receives faxes automatically. When you use only the fax function, select this mode without connecting an external telephone.

When Receiving FAX The machine receives faxes automatically.

When Receiving VOICE CALL The machine does not respond.

Automatically switches between fax calls and voice calls. The machine receives faxes automatically and rings for voice calls.

When Receiving FAX The machine receives faxes automatically.

When Receiving VOICE CALL The machine rings. Answer the call.

Receives faxes automatically and routes voice calls to the telephone with built-in answering machine.

When Receiving FAX The telephone with built-in answering machine rings and the machine receives faxes automatically.

When Receiving VOICE CALL The telephone with built-in answering machine rings and records voice messages.

Rings for every call, whether it is a fax call or a voice call. For a fax call, you have to manually activate the machine to receive the fax.

When Receiving FAX The external phone rings. To receive the fax, pick up the receiver then select . Alternatively, you can use the remote reception function through the external telephone.

When Receiving VOICE CALL The external telephone rings. Answer the call.

SelecttheReceiveModethatSuitsYourNeeds

Page 27

25

2 Set Up the Machine

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode that most suits your needs from the chart below. For more information about the receive modes, see About the Receive Modes, on p. 24.

1 Make sure the screen on the left side is displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Use [], [] or (Scroll Wheel) to select or for the question on the screen, the press [OK].

YES

NO Go to Connect Telephone Cables, on p. 27.

YES

NO Go to Connect Telephone Cables, on p. 27.

To the Next Page

Page 28

26

2 Set Up the Machine

NO

YES

NO

A screen appears asking you to confirm that the auto answering function of the telephone with built-in answering machine or answering machine is activated. After this screen,

go to Connect Telephone Cables, on p. 27.

At this mode( ), remote reception function is available with connecting to the external telephone to the

machine. Go to Connect Telephone Cables, on p. 27.

The remote reception function is useful when the receive mode is set to and your machine is connected to an external telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the default setting is 25). For details, see Fax, in the e-Manual. Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use . (See Connect Telephone Cables, on p. 27.) The external telephone must be connected to the machine to use or . (See Connect Telephone Cables, on p. 27.) By default, is selected in . If an external telephone is connected to the machine and receives a fax or voice call, the external telephone rings. You can answer voice calls while the external telephone is ringing . To disable the incoming ring, press (Main Menu) to select , then select . Voice mail is not supported with . DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s), using only one telephone line. Your machine automatically monitors incoming calls and the ring pattern, to let you know if the call is fax or voice call. Set the ring patterns assigned by your telephone company for a fax or voice call. Contact your telephone company for information on availability.

Page 29

27

2 Set Up the Machine

Connect Telephone Cables

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

When mode The other receive modes

2 Check the socket on the right side of the main unit, then press [OK] to proceed to the Setup Guide.

3 Connect the supplied telephone cable to the telephone line jack (A) on the right side of the machine and the wall jack. If you want to use your own external telephone or telephone with built-in answering machine, connect the cable to external device jack (B) on the right side of machine.

When your receive mode is , only the supplied telephone cable to the telephone line jack (A) is displayed on the screen.

4 Press [OK] to proceed to the Setup Guide.

Page 30

28

2 Set Up the Machine

5 Make sure the following screen is displayed on the display.

By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the following procedure. If you use pulse dialing, follow the procedure below after you finish the Setup Guide, and change the telephone line type setting on the machine to pulse dialing. If you do not know the type of telephone line you use, contact your local telephone company.

1 Press (Main Menu).

2 Press the right Any key to select .

3 Use [], [] or (Scroll Wheel) to select , then press [OK].

4 Use [], [] or (Scroll Wheel) to select , then press [OK].

5 Use [], [] or (Scroll Wheel) to select , then press [OK].

6 Use [], [] or (Scroll Wheel) to select , then press [OK].

7 Use [], [] or (Scroll Wheel) to select , then press [OK].

8 Use [], [] or (Scroll Wheel) to select telephone line type, then press [OK]. : Tone dialing (Default) : Pulse dialing

9 Press (Main Menu) to return to the Main Menu screen.

IfYouNeedtoUsePulseDialing

Page 31

29

2 Set Up the Machine

Adjust Color with Auto Gradation Correction

When using the machine for the first time, it is necessary to adjust the gradation in order to obtain the optimum copy or print results. There are two types of gradation adjustments that can be made: Full Correction and Quick Correction.

Full Correction This is a precise adjustment. The procedure involves making test prints and placing them on the feeder for scanning. Once this is complete, the machine automatically corrects the irregularities.

Make sure that you place the test prints properly. Accurate adjustments cannot be made if the test prints are not scanned correctly.

Quick Correction This is a quick and simple adjustment. Adjustment is made internally without outputting any test prints.

It is recommended that you select when performing an automatic gradation adjustment. Select for a quick, but less complete adjustment between regular full corrections.

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

2 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Page 32

30

2 Set Up the Machine

3 Use [], [] or (Scroll Wheel) to select or , then press [OK].

It is recommended that you select . It takes approximately 300 seconds to perform the full correction. For the full correction, the machine performs the correction twice and two test prints are output by the machine for the each correction.

You selected (=Quick Correction) Make sure the following screen is displayed on the display, then press [OK] to start the quick correction. (It takes approximately 150 seconds to perform the quick correction.)

Recalibrations are made internally without outputting any test prints. After finishing the quick correction, go to Set Up Network Connection, on p. 32.

4 Make sure the following screen is displayed on the display, then press [OK] to print the first test page.

5 Place the first test print on the platen glass.

Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. Stack approximately 20 sheets of blank paper on top of the test print for a more precise gradation correction.

6 Make sure the following screen is displayed on the display, then press (Start) to perform the correction.

7 Remove the first test print from the platen glass.

Page 33

31

2 Set Up the Machine

8 Make sure the following screen is displayed on the display, then press [OK] to print the second test page.

9 Place the second test print on the platen glass.

Place the test print face down on the platen glass, with the black bands along the top left edge of the platen glass. Stack approximately 20 sheets of blank paper on top of the test print for a more precise gradation correction.

10 Make sure the following screen is displayed on the display, then press (Start) to perform the correction.

11 Remove the second print from the platen glass.

12 Make sure the following screen is displayed on the display.

In the next setting, you will set the network connection. If you do not set the network connection, select , then go to Finish Setup Guide, p. 35.

Page 34

32

2 Set Up the Machine

Set Up Network Connection

To use the machine by connecting to the network, you must set up the IP address. An IP (Internet Protocol) address is an identification number assigned to each individual computer connected to the Internet. To use the following functions, you must set up the IP address in advance.

Remote UI: Access and change the machine settings from a web browser on the computer by using the remote UI software. E-Mail: Send the scanned documents attached to an e-mail message through a network. Scan to File Server: Send a scanned document to a file server from the computer. I-Fax: Send a document to a machine that is compatible with I-fax. PC Print: Print documents on a computer. PC Fax: Fax a document on a computer. Scan with Network ScanGear (application on the software CD-ROM):

Save scanned documents to a computer.

The following flow chart indicates the settings needed for each function.

Page 35

33

2 Set Up the Machine

The Setup Guide only supports IPv4. By default, the IP address is automatically assigned to the machine by the DHCP server.

1 Make sure the following screen is displayed on the display. Use [], [] or (Scroll Wheel) to select or .

A: When you use the machine through the network, select then press [OK].

B: When you do not use the machine through the network, Select , then press [OK]. (Go to Finish Setup Guide, on p. 35.)

The setting for IPv6 is not supported with the Setup Guide. When you want to use the machine on the IPv6 environment, select and set it up after finishing the Setup Guide. See Network Settings, in the e- Manual.

2 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

If the LAN cable is not connected to the machine, a screen instructing you to connect the LAN cable will appear before this screen. If the machine dose not get the IP address 3 minutes after you connect the LAN cable, check the IP address settings and the network cable.

3 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Page 36

34

2 Set Up the Machine

4 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

If the machine does not get the IP address, subnet mask and gateway address, each of the screen displays 000.000.000.000.

5 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

See Network Settings, in the e-Manual.

6 Make sure the following screen is displayed on the display.

Go to Finish Setup Guide, on p. 35.

If there are any unestablished items, a screen appears before this screen listing the unestablished items.

Page 37

35

2 Set Up the Machine

This is the setting for the static IP address. If you need to enter the IP address manually or if the machine obtain the IP address automatically but need to configure the setting manually, follow the procedure below. Configure the setting for the IP address manually in the User Mode after finishing the Setup Guide. In this setting, enter the IP address, subnet mask, and gateway address manually. Press (Main Menu) Enter the IP address Enter the subnet mask Enter the gateway address (Main Menu) to return to the Main Menu screen. Turn OFF the main power Restart the machine. For more information on this setting, see Network Settings, in the e-Manual.

SetIPAddressManually

Finish Setup Guide

All the settings with the Setup Guide are complete. Follow the procedure below to finish the Setup Guide. After finishing the Setup Guide, you need to set up the computer and software for the machine.

1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the Setup Guide.

Make sure the USB cable is not connected to the machine. If it is connected already, disconnect it from the machine.

2 Press [OK] to finish the Setup Guide.

Page 38

36

2 Set Up the Machine

When you change the settings on the machine after finishing the Setup Guide, refer to the following items.

Paper Size/Type: (Main Menu) Select the drawer Select the paper size

Select the paper type (Main Menu) to return to the Main Menu screen. (See Introduction of the Machine, in the e-Manual.)

Date and Time: (Main Menu)

Settings> Enter the date and time (Main Menu) to return to the Main Menu screen. (See Introduction of the Machine, in the e-Manual.)

Daylight Saving Time: (Main Menu)

Time Set.> Select or (Main Menu) to return to the Main Menu screen. (See Introduction of the Machine, in the e-Manual.)

Telephone Number Registration: (Main Menu)

Settings> Enter the telephone number, then (Main Menu) to return to the Main Menu screen. (See Fax, in the e-Manual.)

Unit Name Registration: (Main Menu)

Settings> Enter the unit name, then (Main Menu) to return to the Main Menu screen. (See Fax, in the e-Manual.)

Receive Mode: (Main Menu)

Settings> Select the receive mode (Main Menu) to return to the Main Menu screen. (See Fax, in the e-Manual.)

Telephone Line Type: (Main Menu)

Settings> Select the telephone line type (Main Menu) to return to the Main Menu screen. (See Fax, in the e-Manual.)

Auto Gradation Correction: (Main Menu)

Select the correction type Perform the correction (Main Menu) to return to the Main Menu screen. (See Maintenance, in the e-Manual.)

Network (Auto): (Main Menu)

Enter the IP address Enter the subnet mask Enter the gateway address number (Main Menu) to return to the Main Menu screen. Turn OFF the main power Restart the machine. (See Network Settings, in the e-Manual.)

ChangetheSettings

Page 39

37

2 Set Up the Machine

Network (Manual): (See Set IP Address Manually, on p. 35.)

Restart the Setup Guide: . (See Introduction of the Machine, in the e-Manual.)

The machine may enter or the Standby mode (default setting is 2 minutes) or the Sleep mode (default setting is 15 minutes) while you are performing setup. To change the settings, see Introduction of the Machine in the e-Manual.

Page 40

38

3 SetUpComputersandSoftware

Types of Connection between Computers and the Machine

There are two ways to connect the machine and computers: USB connection and network connection.

NetworkConnection(Fordetailsaboutthesetup,seep.41.) The following functions are available with Network Connection: PC Print, Remote UI, PC Fax, Scan, E-Mail/I-Fax, Scan to File Server.

For more information on how to use each function with network connection, refer to the following. PC Print Print, in the e-Manual Remote UI Settings from a PC, in the e-Manual PC Fax Fax, in the e-Manual Scan Scan, in the e-Manual E-Mail/I-Fax E-mail/Fax, in the e-Manual Scan to File Server Scan, in the e-Manual

USBConnection(Fordetailsaboutthesetup,seep.48.) The following functions are available with USB Connection: PC Print, PC Fax.

For more information on how to use each function with USB Connection, refer to the following. PC Print Print, in the e-Manual PC Fax Fax, in the e-Manual

You can use the USB connection and network connection together.

Page 41

39

3 Set Up Computers and Software

System Requirements

Microsoft Windows 2000 CPU: Intel Pentium/133MHz or faster Memory: 128MB or more

Microsoft Windows XP CPU: Intel Pentium/Celeron series 300MHz or faster Memory: 128MB or more

Microsoft Windows Server 2003 CPU: Intel Pentium/Celeron series 133MHz or faster Memory: 128MB or more

Microsoft Windows Vista CPU: Intel Pentium 800MHz or faster Memory: 512MB or more

Microsoft Windows Server 2008 CPU: Minimum: Intel Itanium 2 processor/1GHz (x86 processor), 1.4GHz (x64 processor) or faster Memory: 512MB or more

About User Software CD-ROM

Details about each drivers installation can be found in the corresponding HTML manuals listed in the Manuals subsection on p. 40.

UFRII LT Driver Using the UFRII LT Driver, the various data processing tasks conventionally executed within the printer are appropriately divided between the host PC and the printer to greatly reduce the overall printing time. The workload can be delegated to match the output data, thus realizing a significant increase in speed through optimization.

FAX Driver The FAX Driver is conceptually akin to a printer driver. A user selects [Print] from any Windows application software, selects the Canon fax driver as the printer, and specifies its destination(s) and options. The FAX Driver then converts this into an image that conforms to standard fax protocols, to be printed or stored on the recipient fax machine(s).

PCL Printer Driver (Color imageCLASS MF9170c Only) This is Hewlett-Packards PCL printer driver, which includes the PCL5c, and PCL6 drivers. The PCL5c printer driver is for color printers, while the PCL6 printer driver is for black-and- white printer. PCL6 is an advanced version of PCL5c and offers superior printing quality and speed. This machine supports the PCL5c and PCL6 printer drivers.

Color Network ScanGear Install this software to use the machine as a scanner on a network.

Page 42

40

3 Set Up Computers and Software

Details about each drivers installation can be found in the corresponding HTML manuals listed in the Manuals subsection below.

NetSpot Device Installer (NSDI) The NetSpot Device Installer enables you to set up the machine for network operations. When you start this program, click [Additional Software Programs] (See step 3 of Installation Procedure - For Network Connection, or step 2 of Installation Procedure - For USB Connection - Install Software,) then follow the instructions that appear on the screen. For details, see the Readme file and online help for this program.

Canon Font Manager (Color imageCLASS MF9170c Only)

Font Manager is a comprehensive program that helps you manage your fonts in Microsoft Windows.

Printer Driver Installation Guide

The Printer Driver Installation Guide describes UFR II driver installation, updating shared printer information, uninstallation, configuration, and printing.

Canon Products Supported by UFR II Driver The Canon Products Supported by UFR II Driver describes compatible Canon products that are compatible with the UFR II driver.

Fax Driver Installation Guide The Fax Driver Installation Guide describes Fax driver installation, updating shared printer information, uninstallation, configuration, and printing.

Canon Products Supported by Fax Driver The Canon Products Supported by Fax Driver describes compatible Canon products that are compatible with the Fax driver.

Network ScanGear Installation Guide The Network ScanGear Installation Guide describes Network ScanGear installation, and uninstallation.

About Other Software Programs (Color imageCLASS MF9170c Only) The About Other Software Programs describes Canon Font Manager installation, and uninstallation.

Printer Driver Installation Guide (Color imageCLASS MF9170c Only) The Printer Driver Installation Guide describes PCL driver installation, updating shared printer information, uninstallation, configuration, and printing.

Canon Products Supported by PCL Driver (Color imageCLASS MF9170c Only) The Canon Products Supported by PCL Driver describes compatible Canon products that are compatible with the PCL driver.

Page 43

41

3 Set Up Computers and Software

Network Connection

BeforeInstallation The following procedures are explained using sample screens from Windows XP Professional.

For Windows 2000/XP/Server 2003/Vista/Server 2008, log on as an Administrator to install the software.

Click on the circled button on each screen to proceed to the next step.

Make sure the machine is turned ON. (See Connect Power Cord and Turn on the Machine, on p. 9.)

Make sure the network cable is connected to the machine. (See Connect the LAN Cable, on p. 8.)

Make sure an IP address is assigned to the machine. (See Network Settings, in the e-Manual.)

InstallationProcedure

1 Connect the machine to the network correctly, and confirm that the power is on.

2

Insert the UFR II/FAX User Software CD-ROM.

3

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar [My Computer]. Windows Vista/Server 2008: click [Start] on the Windows task bar [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop. Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]).

4

Check the boxes next to the UFR II Printer Driver, FAX Driver and Color Network ScanGear.

Page 44

42

3 Set Up Computers and Software

The following steps describe the procedure for installing the UFR II Printer Driver, FAX Driver, and Color Network ScanGear all together. If you want to install only the PCL Driver (Color imageCLASS MF9170c Only), proceed to step 29. For more information refer to the PCL Driver installation Guide (located on the PCL CD-ROM). If you want to install only the fax driver, select only FAX Driver in this step, then proceed to step 16. For more information refer to the Fax Driver Installation Guide (located on the UFR II/FAX CD-ROM). If the amount of free disk space is insufficient to install the software, an error message is displayed. Make sure there is sufficient disk space, and then try installing the software again.

5

6

7

8

9

If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or use the Job Accounting feature. If the Canon Driver Information Assist Service is already installed on your computer, this screen is not displayed. If you are using an operating system equipped with Windows Firewall, the following message box may appear. If you want to use Canon Driver Information Assist Service, click [Yes]. If you select [No], you cannot use Canon Driver Information Assist Service.

10

If you are using Color imageCLASS MF8450c, select Canon MF8400 UFRII LT from [Printer List].

Page 45

43

3 Set Up Computers and Software

11

12

13

14

15

16

17

18

19

If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or use the Job Accounting feature. If the Canon Driver Information Assist Service is already installed on your computer, this screen is not displayed. If you are using an operating system equipped with Windows Firewall, the following message box may appear. If you want to use Canon Driver Information Assist Service, click [Yes]. If you select [No], you cannot use Canon Driver Information Assist Service.

Page 46

44

3 Set Up Computers and Software

20

If you are using Color imageCLASS MF8450c, select Canon MF8400 (FAX) from [Fax List].

21

22

23

24

25

The Color Network ScanGear installation screen appears. Follow the on-screen instructions.

26

27

28

Remove the UFR II/FAX User Software CD-ROM.

If you are using Color imageCLASS MF9150c or MF8450c, installation is complete. If you want to install PCL Driver (Color imageCLASS MF9170c Only), go to the next step (step 29).

29

Insert the PCL User Software CD- ROM. (Color imageCLASS MF9170c Only)

Page 47

45

3 Set Up Computers and Software

30

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar [My Computer]. Windows Vista/Server 2008: click [Start] on the Windows task bar [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop. Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]).

31

Select the PCL Printer Driver.

32

33

34

35

36

Select [PCL5e/5c Printer Driver] or [PCL6 Printer Driver].

37

If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or to use the Job Accounting feature. If the Canon Driver Information Assist Service is already installed on your computer, this screen is not displayed. If you are using an operating system equipped with Windows Firewall, the following message box may appear. If you want to use Canon Driver Information Assist Service, click [Yes]. If you select [No], you cannot use Canon Driver Information Assist Service.

38

Page 48

46

3 Set Up Computers and Software

39

40

41

42

43

44

45

Remove the PCL User Software CD- ROM. Installation is complete.

Page 49

47

3 Set Up Computers and Software

CheckInstallation Verify that the driver has been installed successfully and that the machine has been set as the default printer.

If the name of your machine is selected on the [Printer] screen from an application, it is set as the default printer.

1 Open the [Printers and Faxes] folder (for Windows 2000: The [Printers] dialog box). Windows XP/Server 2003: From the Windows task bar, click [start] select [Printers and Faxes]. Windows Server 2008: From the Windows task bar, click [Start] select [Control Panel] double-click [Printers]. Windows Vista: From the Windows task bar, click [Start] select [Control Panel] [Hardware and Sound] double-click [Printers]. Windows 2000: From the Windows task bar, click [Start] [Settings] [Control Panel] double-click [Printers].

Verify that the corresponding printer driver icon is displayed.

2 Set your machine as the default printer. Verify that printer icon for this machine. Select [Set as Default Printer] from the [File] menu.

3 Verify that [Color Network ScanGear] appears in the program list. Windows XP/Server 2003: From the Windows task bar, click [start] select [All Programs]. Windows Vista/Server 2008: From the Windows task bar, click [Start] select [All Programs]. Windows 2000: From the Windows task bar, click [Start] [Programs].

Verify that the [Color Network ScanGear] is listed in [All Programs] (or [Programs]).

Page 50

48

3 Set Up Computers and Software

USB Connection

BeforeInstallation The following procedures are explained using sample screens from Windows XP Professional.

Do not connect the USB cable before installing the software. If you connect the USB cable before installing the software and the Found New Hardware Wizard screen appears, click [Cancel].

For Windows 2000/XP/Server 2003/Vista/Server 2008, log on as Administrator to install the software.

Make sure the machine is turned on before connecting the USB cable.

Click on the circled button on each screen to proceed to the next step.

A USB cable is not included with the machine.

InstallationProcedure

1

Insert the UFR II/FAX User Software CD-ROM.

2

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar [My Computer]. Windows Vista/Server 2008: click [Start] on the Windows task bar [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop. Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]).

3

Check the boxes next to the UFR II Printer Driver, FAX Driver and Color Network ScanGear.

The following steps describe the procedure for installing the UFR II Printer Driver, FAX Driver, and Color Network ScanGear all together. If you want to install only the fax driver, select only FAX Driver in this step, then proceed to step 14. For more information refer to the Fax Driver Installation Guide (located on the UFR II/FAX CD-ROM). If you want to install only the PCL Driver (Color imageCLASS MF9170c Only), proceed to step 28. If you want to install the PCL driver by connecting the USB cable (plug and play), it is necessary to change the settings of the machine. Press (Main Menu) / . After changing the machine settings, proceed to step 4 to install the driver using the same procedure as for the UFR II Printer Driver. Also refer to the PCL Driver installation Guide (located on the PCL CD-ROM). If the amount of free disk space is insufficient to install the software, an error message is displayed. Make sure there is sufficient disk space, and then try installing the software again.

Page 51

49

3 Set Up Computers and Software

4

5

6

7

8

9

10

If the dialog box shown above appears, press [Retry] to continue the installation.

11

Remove the attachment (A) that covers the USB port on the back of the machine.

Remove the attachment (A) by pulling the strap.

12

Connect the machine and your computer with a USB cable (A).

The USB cable is not included. If the Found New Hardware Wizard appears, click [Cancel] and continue the installation.

Page 52

50

3 Set Up Computers and Software

13

14

15

16

17

If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or use the Job Accounting feature. If the Canon Driver Information Assist Service is already installed on your computer, this screen is not displayed. If you are using an operating system equipped with Windows Firewall, the following message box may appear. If you want to use Canon Driver Information Assist Service, click [Yes]. If you select [No], you cannot use Canon Driver Information Assist Service.

18

If you are using Color imageCLASS MF8450c, select Canon MF8400 (FAX) from [Fax List].

19

20

Select the USB port you want to use from the [Port] drop-down list. If you want to add a port, click [Add Port] and then select the USB port that you want to add.

Page 53

51

3 Set Up Computers and Software

21

22

23

24

25

The Color Network ScanGear installation screen appears. Follow the on-screen instructions.

26

27

28

Remove the UFRII LT/FAX User Software CD-ROM.

If you are using Color imageCLASS MF9150c or MF8450c, installation is complete. If you want to install PCL Driver (Color imageCLASS MF9170c Only), go to the next step (step 29).

29

Insert the PCL User Software CD- ROM. (Color imageCLASS MF9170c Only)

Page 54

52

3 Set Up Computers and Software

30

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar [My Computer]. Windows Vista/Server 2008: click [Start] on the Windows task bar [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop. Open the CD-ROM icon, then double- click [MInst] ([MInst.exe]).

31

Select the PCL Printer Driver.

32

33

34

35

36

If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or use the Job Accounting feature. If the Canon Driver Information Assist Service is already installed on your computer, this screen is not displayed. If you are using an operating system equipped with Windows Firewall, the following message box may appear. If you want to use Canon Driver Information Assist Service, click [Yes]. If you select [No], you cannot use Canon Driver Information Assist Service.

37

Select [Canon MF9100/9300 PCL5e] or [Canon MF9100/9300 PCL6].

Page 55

53

3 Set Up Computers and Software

38

39

Select the USB port you want to use from the [Port] drop-down list. If you want to add a port, click [Add Port] and then select the printer port that you want to add.

40

41

42

43

44

45

46

Remove the PCL User Software CD- ROM. Installation is complete.

Page 56

54

3 Set Up Computers and Software

CheckInstallation Verify that the driver has been installed successfully and that the machine has been set as the default printer.

If the name of your machine is selected on the [Printer] screen from an application, it is set as the default printer.

1 Open the [Printers and Faxes] folder (for Windows 2000: The [Printers] dialog box). Windows XP/Server 2003: From the Windows task bar, click [start] select [Printers and Faxes]. Windows Server 2008: From the Windows task bar, click [Start] select [Control Panel] double-click [Printers]. Windows Vista: From the Windows task bar, click [Start] select [Control Panel] [Hardware and Sound] double-click [Printers]. Windows 2000: From the Windows task bar, click [Start] [Settings] [Control Panel] double-click [Printers].

Verify that the corresponding printer driver icon is displayed.

2 Set your machine as the default printer. Verify that printer icon for this machine. Select [Set as Default Printer] from the [File] menu.

3 Verify that [Color Network ScanGear] appears in the program list. Windows XP/Server 2003: From the Windows task bar, click [start] select [All Programs]. Windows Vista/Server 2008: From the Windows task bar, click [Start] select [All Programs]. Windows 2000: From the Windows task bar, click [Start] [Programs].

Verify that the [Color Network ScanGear] is listed in [All Programs] (or [Programs]).

Page 57

55

4 Appendix

User Manual CD-ROM (e-Manual)

The User Manual CD-ROM (e-Manual) is a software that enables you to select and view the HTML Manuals included on the CD-ROM via your computer screen. The e-Manual describes all of the functions and troubleshooting for the machine. Follow the instructions below to use the User Manual CD-ROM (e-Manual).

SystemRequirements The User Manual CD-ROM (e-Manual) can be used in the following system environments.

Target Operating System Windows: 2000 SP4, XP, Vista (Internet Explorer 6.0 is required if you are using Windows 2000 SP4.) Mac: OSX.4.x

Target Browser Windows: Internet Explorer 6.0 or 7.0 Mac: Safari 2.0.x

Flash Player Flash Player 8.0 or later

The memory and CPU required to run each operating system are also required. A display resolution of 1024 x 768 pixels or higher is required. The User Manual CD-ROM (e-Manual) may not operate correctly if Flash Player is not installed or a version of Flash Player earlier than Flash Player 8.0 is installed on your computer

UsingtheUserManualCD-ROM(e-Manual) When using the e-Manual with Windows, follow the steps below. 1. Insert the User Manual CD-ROM on your computer. 2. Select the language. 3. Click [Install] or [Display manual]. 4. When you click [Install], the e-Manual is installed on your computer and the short cut is created on the desktop. 5. When you click [Display manual], the e-Manual is displayed. 6. To display the e-Manual that you installed on your computer, double-click the short cut icon on the desktop.

When using the e-Manual with Macintosh, follow the steps below. 1. Insert the User Manual CD-ROM on your computer. 2. Drag-and-drop the [MF9100_MF8400_Manual_us] folder into the location you want to save it. 3. Open the [MF9100_MF8400_Manual_us] folder. 4. Double-click index.html, and the e-Manual is displayed.

If the menu is not displayed automatically after you insert the CD-ROM, click [Start] on the Windows task bar [My Computer]. (Windows Vista/Server 2008: click [Start] on the Windows task bar [Computer]. Windows 2000: double-click [My Computer] on the Windows desktop.) Open the User Manual CD-ROM icon, then double-click start.exe. Depending on the operating system you are using, a security protection message may be displayed. In this case, allow the contents to be displayed.

Page 58

56

4 Appendix

When you start the e-Manual, the screen shown below is displayed.

If you are using a browser such as Internet Explorer for Windows XP, ActiveX blocks pop-ups in the background. If the e-Manual is not displayed properly, look for an information bar at the top of the page and click the information bar.

A [Function List] Click to display the topic pages for function categories.

B [Top] Click to return to the top page.

C [Contents] Click to display the topic pages for Contents.

D [Index] Click to display the topic pages for Index.

E [Search] Click to display a list of the topic page titles that include the phrase you enter. Click a title to display the corresponding topic page.

F Function Categories Select a function category to display a list of image icons for the topics corresponding to that function. Click an image icon or [Display Function List] to display the topic pages for the function category.

G [Print] Click to print all categories or a single category.

H Appendix Categories Select an appendix category to display the topic pages not related to functions, such as the maintenance and troubleshooting topics.

I [Office Locations] Click to display Canon contact details in a separate window.

When performing a search, make sure to enter a phrase that will match a keyword. Depending on the phrase you enter, the correct search results may not be displayed. Topic pages can be printed by page or by category. The background color and images of the Topic Page may not be printed, depending on the web browser settings.

Page 59

Contacting Service Center

When you have a problem with your machine and you cannot solve it even after referring to the manuals or online help, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800- 828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST for U.S.A. and 9:00 A.M. to 8:00 P.M. EST for Canada Monday through Friday and 10:00 A.M. to 8:00 P.M. on Saturday. Canadian customer support is available on-line at www.canon.ca or by calling 1-800-652-2666 Monday through Friday from 9:00 A.M. to 8:00 P.M. EST.

Trademarks Canon, the Canon logo, Color imageCLASS, and NetSpot are trademarks of Canon Inc. Microsoft, Windows, Windows Server, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or other countries. All other product and brand names are registered trademarks, trademarks or service marks of their respective owners.

Copyright Copyright 2008 by Canon Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Canon Inc. UFST: Copyright 1989-2003 Monotype Imaging, Inc.

Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

Page 60

CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A.

CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada

CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands

CANON FRANCE S.A.S. 17, quai du Prsident Paul Doumer 92414 Courbevoie Cedex, France

CANON COMMUNICATION & IMAGE FRANCE S.A.S. 12, rue de IIndustrie 92414 Courbevoie Cedex, France

CANON (U.K.) LTD. Woodhatch, Reigate, Surrey, RH2 8BF, United Kingdom

CANON DEUTSCHLAND GmbH Europark Fichtenhain A10, 47807 Krefeld, Germany

CANON ITALIA S.p.A. Via Milano, 8 20097 San Donato Milanese (MI) Italy

CANON ESPAA, S.A. c/ Joaqun Costa 41, 28002 Madrid, Spain

CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.

CANON AUSTRALIA PTY. LTD. 1 Thomas Holt D

Manualsnet FAQs

If you want to find out how the Color imageCLASS Canon works, you can view and download the Canon Color imageCLASS MF9150c Starter Guide on the Manualsnet website.

Yes, we have the Starter Guide for Canon Color imageCLASS as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Starter Guide should include all the details that are needed to use a Canon Color imageCLASS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon Color imageCLASS MF9150c Starter Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon Color imageCLASS MF9150c Starter Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon Color imageCLASS MF9150c Starter Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon Color imageCLASS MF9150c Starter Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon Color imageCLASS MF9150c Starter Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.