Canon UHD XS CJ20ex7.8B Operation Manual PDF

Pages 146
Year 2020
Language(s)
English en
Japanese ja
Russian ru
Kazakh kk
Chinese zh
1 of 146
1 of 146

Summary of Content for Canon UHD XS CJ20ex7.8B Operation Manual PDF

Page 3

ENGLISH VERSION See Page E1 ... C1

Page 5

HJ14ex4... 3B HJ17ex6... 2B HJ18ex7... 6B HJ18ex28B HJ21ex7... 5B HJ24ex7... 5B

Page 7

1... 2... 3... 61

Page 8

Page 10

20 20

Page 11

2... DC12V DC10V 17V

Page 12

1 CJ12ex/CJ15ex/CJ14ex/HJ14ex 1-3m CJ20ex/CJ25ex/CJ18ex7... 6B/CJ24ex/HJ17ex/ HJ18ex7... 6B/HJ21ex/HJ24ex/KJ10ex/KJ17ex/KJ17ex I I / KJ22ex/KJ22ex II 2-5m CJ18ex28B/HJ18ex28B: 5-7m

Page 13

AUXMEMO

Page 14

4-4... Top3

Page 15

MANU... SERVO

Page 16

2... 2 2

Page 17

5-1-6... VTRRETAUXAUX1AUX2 Sped VTRSped

Page 18

Frame1 Frame2 2 Frame1 Frame1 Fr1P

Page 19

OFF

Page 20

IASE S IASE-C SKASE S SERVO

Page 21

Page 22

5-6... VTRRETAUXAUX1AUX25 VTR RETFr1PShtlFr1P

Page 23

1 96... 3 64... 2 96... 3 64... 2 63... 2 38... 2 2 58... 3 34... 9 58... 3 34... 9 34... 2 19... 6

Page 24

Max... 0... 5s 0... 2s 1... 5s 0... 3s

Page 25

1 76... 4 43... 0cm 65... 5 36... 8cm 71... 0 39... 9cm 2 38... 2 21... 5cm 32... 8 18... 4cm 35... 5 20... 0cm

Page 26

Max... 0... 5s 0... 2s 1... 5s 0... 3s

Page 27

1 96... 3 64... 2 75... 5 47... 1 64... 6 39... 1 2 58... 3 34... 9 42... 3 24... 6 35... 1 20... 1

Page 28

1 71... 1 40... 0cm 120... 4 67... 7cm 96... 0 54... 0cm 2 35... 6 20... 0cm 60... 2 33... 9cm 48... 0 27... 0cm

Page 29

1 93... 7 61... 9 63... 9 38... 6 63... 9 38... 6 2 56... 1 33... 4 34... 6 19... 9 34... 6 19... 9

Page 30

1 64... 6 39... 1 64... 6 39... 1 2 35... 1 20... 1 35... 1 20... 1

Page 32

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules... These limits are designed to provide reasonable protection against harmful interference in a residential installation... This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications... However, there is no guarantee that interference will not occur in a particular installation... If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna... -- Increase the separation between the equipment and receiver... -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected... -- Consult the dealer or an experienced radio/TV technician for help...

Page 33

Accessories other than those mentioned above may be required depending on the specifications of your unit... For details, contact your dealer or Canon Inc...

Page 34

The safety warnings and cautions provided on the product or in this operation manual must be observed... Failure to observe these warnings and cautions may result in injury or accident... Read this operation manual carefully to familiarize yourself with its contents and ensure that you can operate the product properly... Also, store this manual in a safe place where it can easily be referenced whenever necessary...

Page 35

Should any of the abnormalities described below occur, immediately dismount the lens from the camera and contact your Canon sales representative or dealer... Smoke, fumes, or unusual noises Entry of foreign objects (such as liquid or metal objects) inside the product

Page 37

3-2... IRIS GAIN ADJUSTMENT 3-1... BACK FOCUS ADJUSTMENT OF THE LENS

Page 38

NOTE) Virtual output port is Connector only... Use these connectors to connect the control accessory (equipped with a 20 pin connector) for zooming or focusing... Connector is also used to connect to the interface of such as virtual system... It can output each positioning signal of zoom, focus, and iris...

Page 39

2... Rated voltage: 12 VDC Normal operation range: 10 to 17 VDC If a battery or adapter is used, the output voltage may be higher than the rated voltage depending on the manufacturers and therefore the above voltages must be observed strictly... If a voltage outside the normal operation range is used, the drive unit may be damaged... And the lens power input has the positive and negative polarities... Make sure to connect the power cable to the correct polarity when connecting the batteries or the adaptors... Connecting the cable to the incorrect polarity may cause the damage to the product...

Page 40

1Select an object at an appropriate distance (CJ12ex/ CJ15ex/CJ14ex/HJ14ex : approx... 1 to 3m, CJ20ex/CJ25ex/ CJ18ex7... 6B/CJ24ex/HJ17ex/HJ18ex7... 6B/HJ21ex/HJ24ex/ KJ10ex/KJ17ex/KJ17ex II/KJ22ex/KJ22ex II : approx... 2 to 5m, CJ18ex28B/HJ18ex28B : approx... 5 to 7m recommended)... Use any object with sharp contrast to facilitate the adjustment work...

Page 41

switch serves as a regular zoom switch... AUX and MEMO switches are disabled... To set auto iris gain adjustment, use either display or trimmer operations... Shuttle shot, framing preset, speed preset, and zoom tracking are not available...

Page 42

For details on how to set each setting item, refer to Information Display Manual in the supplied CD-ROM...

Page 43

2Press the zoom rocker seesaw to perform zoom operation... Zoom speed changes by the depth of the switch being pressed... The deeper the switch is pressed the faster the zoom speed... A

Page 44

2 Keeping this zoom position, press the Instant Auto-Iris switch while holding down the MEMO switch... If the zoom position is at the telephoto end, the position is stored as the zoom track posi- tion for the telephoto limit... If position is at the widest angle end, it is stored as the widest end...

Page 45

Before using shuttle-shot function, the shuttle function must be assigned to the VTR, RET, or AUX switch of the drive unit, or the AUX1 or AUX2 switch on the zoom demand... This manual describes the Shtl function assigned to the VTR switch... For details, refer to "5-6 SWITCH OPERATIONS"...

Page 46

2... How to operate the speed preset function When the Sped switch is pressed, the zoom starts to move at the preset speed and to the determined direction (toward the telephoto angle or the widest angle) stored in section 1 and stops at the zoom end...

Page 47

2... Moving to the framing memory position Once the Fr1P switch is pressed, the zoom starts to move toward the framing memory position at the preset speed and stops at the framing memory position... When the zoom reaches the framing memory position, it stops and stays there...

Page 48

Slide the iris operation mode change-over switch to the A position... The iris operation is performed automatically by the instruction from the camera, to keep the video signal level constant...

Page 49

In macro shooting, when zooming to change the focal length, the focal point varies... The multi-point focus shooting technique uses this characteristic... The focal point is shifted by the zoom operation... Follow the steps bellow :

Page 50

5-6... SWITCH OPERATIONS Functions can be assigned to the five switches: the VTR, RET, AUX switches, or AUX1 and AUX2 switches on the information display... VTR, RET, Shtl, and Fr1P functions are assigned respectively by default... The following steps explain how to assign the functions to the switches in basic mode...

Page 51

Mass without Hood IRSE S Approx... 2... 10kg Approx... 2... 11kg - IASE S Approx... 2... 18kg Approx... 2... 19kg Approx... 2... 18kg

Page 52

(Hood Unit Thread Size) Zoom Speed for Full Range Max... 0... 5s 0... 2s Focus Speed for Full Range 1... 5s 0... 3s

Page 53

Zoom Speed for Full Range Max... 0... 5s 0... 2s Focus Speed for Full Range 1... 3s 0... 3s 1... 5s 0... 3s

Page 54

(Hood Unit Thread Size) Zoom Speed for Full Range Max... 0... 5s 0... 2s Focus Speed for Full Range 1... 5s 0... 3s

Page 55

Mass without Hood IRSE S Approx... 1... 99kg Approx... 1... 97kg Approx... 1... 58kg IASE S Approx... 2... 07kg Approx... 2... 05kg Approx... 1... 66kg

Page 56

Mass without Hood IRSE S - - Approx... 1... 78kg IASE S Approx... 2... 56kg Approx... 2... 69kg Approx... 1... 86kg

Page 57

Mass without Hood IRSE S Approx... 1... 83kg Approx... 1... 48kg Approx... 1... 65kg IASE S Approx... 1... 91kg Approx... 1... 56kg Approx... 1... 73kg

Page 58

(Hood Unit Thread Size) Zoom Speed for Full Range Max... 0... 5s 0... 2s Focus Speed For Full Range 1... 5s 0... 3s

Page 61

HJ14ex4... 3B HJ17ex6... 2B HJ18ex7... 6B HJ18ex28B HJ21ex7... 5B HJ24ex7... 5B

Page 62

1... 2... 3... 4... 5... ()

Page 63

1... 2...

Page 66

RET MEMO AUX

Page 67

2... DC12V DC10V 17V

Page 68

1CJ12ex/CJ15ex/CJ14ex/ HJ14ex : 1-3m , CJ20ex/CJ25ex/CJ18ex7... 6B/ CJ24ex/HJ17ex/HJ18ex7... 6B/HJ21ex/HJ24ex/KJ10ex/ KJ17ex/KJ17ex /KJ22ex/KJ22ex : 2-5m , CJ18ex28B/HJ18ex28B : 5-7m

Page 69

AUX MEMO

Page 71

2

Page 72

1... OFF

Page 73

VTRRETAUX AUX1AUX2SpedVTR Sped

Page 74

2 Frame1 Frame2 Frame1 Frame1 Fr1P

Page 75

1... MEMOFr1P

Page 76

IASE IASE-C S, KASE S SERVO

Page 77

Page 78

5-6 VTRRETAUXAUX1AUX25 VTRRETFr1PShtlFr1P

Page 79

20 45 5%RH 95%RH

Page 81

20 45 5%RH 95%RH

Page 83

20 45 5%RH 95%RH

Page 84

20 45 5%RH 95%RH

Page 86

20 45 5%RH 95%RH

Page 87

... R1 K1

Page 88

BT1-B070-L_... indd 2 2020/02/04 15:07:09

Page 89

CJ12ex4... 3B, ... ...

Page 90

, , ... , , ... , ... , , ...

Page 91

... , ... , ...

Page 92

2... Canon , ... , Canon , ...

Page 93

2... : 12 : 10 17 , , , ... , , ... ("+" "-")... , , ... ...

Page 94

MANU... ... SERVO, ...

Page 95

2 , ... , ...

Page 96

(M... O... D) (: 10 ) 0,3 0,8

Page 97

94 P1,0 ( ) 105 P1,0 ( )

Page 98

(M... O... D) (: 10 ) 0,3 0,56 2,2

Page 99

94 P1,0 ( ) 105 P1,0 ( )

Page 100

(M... O... D) (: 10 ) 0,3 0,4 0,56

Page 101

(M... O... D) (: 10 ) 2,2 0,85 0,8

Page 102

127 P0,75 ( ) 82 P0,75 ( )

Page 103

94 P1,0 ( ) 105 P1,0 ( )

Page 104

BT1-B070-L_... indd 16 2020/02/04 15:07:12

Page 105

CJ12ex4... 3B ... ...

Page 106

... ... ... -, ...

Page 107

, ... ... , ...

Page 108

3... Canon ... 4... , ... 5... ,

Page 109

2... : 10 - 17 , , ... , ... ... ... ...

Page 110

NU... ... SERVO , ...

Page 111

, SERVO , ...

Page 112

: -20C 45C : 5% 95%RH ()

Page 113

(M... O... D... ) (: 10 ) 0,8

Page 114

: -20C 45C : 5% 95%RH ()

Page 115

: -20C 45C : 5% 95%RH

Page 116

: -20C 45C : 5% 95%RH ()

Page 117

: -20C 45C : 5% 95%RH ()

Page 118

127 P0,75 ( ) 82 P0,75 ( )

Page 119

94 P1,0 ( ) 105 P1,0 ( )

Page 120

BT1-B070-L_... indd 16 2020/02/04 15:07:15

Page 121

BT1-B070-L__JEC... indd 1 2020/02/04 15:11:22

Page 122

1... CJ12ex4... 3B IASE S 2... CJ15ex4... 3B IASE S 3... CJ20ex7... 8B IASE S 4... CJ25ex7... 6B IASE S 5... CJ14ex4... 3B IASE S 6... CJ18ex7... 6B IASE S 7... CJ18ex28B IASE S 8... CJ24ex7... 5B IASE S 9... HJ14ex4... 3B IASE S 10... HJ17ex6... 2B IASE S 11... HJ18ex7... 6B IASE S 12... HJ18ex28B IASE S 13... HJ21ex7... 5B IASE S 14... HJ24ex7... 5B IASE S 15... KJ10ex4... 5B IASE S 16... KJ17ex7... 7B IASE S 17... KJ17ex7... 7B IASE II S 18... KJ22ex7... 6B IASE S 19... KJ22ex7... 6B IASE II S

Page 123

BT1-B070-L__JEC... indd 3 2020/02/04 15:11:24

Page 124

BT1-B070-L__JEC... indd 4 2020/02/04 15:11:25

Page 125

BT1-B070-L__JEC... indd 5 2020/02/04 15:11:26

Page 126

BT1-B070-L__JEC... indd 6 2020/02/04 15:11:26

Page 127

BT1-B070-L__JEC... indd 7 2020/02/04 15:11:28

Page 128

BT1-B070-L__JEC... indd 8 2020/02/04 15:11:29

Page 129

BT1-B070-L__JEC... indd 9 2020/02/04 15:11:31

Page 130

BT1-B070-L__JEC... indd 10 2020/02/04 15:11:32

Page 131

BT1-B070-L__JEC... indd 11 2020/02/04 15:11:34

Page 132

BT1-B070-L__JEC... indd 12 2020/02/04 15:11:36

Page 133

BT1-B070-L__JEC... indd 13 2020/02/04 15:11:37

Page 134

BT1-B070-L__JEC... indd 14 2020/02/04 15:11:41

Page 135

BT1-B070-L__JEC... indd 15 2020/02/04 15:11:43

Page 136

BT1-B070-L__JEC... indd 16 2020/02/04 15:11:44

Page 137

BT1-B070-L__JEC... indd 17 2020/02/04 15:11:46

Page 138

BT1-B070-L__JEC... indd 18 2020/02/04 15:11:48

Page 139

BT1-B070-L__JEC... indd 19 2020/02/04 15:11:48

Page 140

BT1-B070-L__JEC... indd 20 2020/02/04 15:11:51

Page 141

BT1-B070-L__JEC... indd 21 2020/02/04 15:11:52

Page 142

BT1-B070-L__JEC... indd 22 2020/02/04 15:11:52

Page 143

RET ... 18 VTR ... 18 ... 16 ... 16 ... 16 ... 11 ... 7 ... 16 ... 8 ... 17

Page 144

BT1-B070-L__JEC... indd 24 2020/02/04 15:11:52

Page 145

Please contact your dealer or the contacts below, if you have questions on the products...

Page 146

CANON INC... 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo, 146-8501, Japan

Manualsnet FAQs

If you want to find out how the UHD XS Canon works, you can view and download the Canon UHD XS CJ20ex7.8B Operation Manual on the Manualsnet website.

Yes, we have the Operation Manual for Canon UHD XS as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation Manual should include all the details that are needed to use a Canon UHD XS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon UHD XS CJ20ex7.8B Operation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon UHD XS CJ20ex7.8B Operation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon UHD XS CJ20ex7.8B Operation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon UHD XS CJ20ex7.8B Operation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon UHD XS CJ20ex7.8B Operation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.