Contents

Canon DP-V2410 Operation Guide PDF

1 of 127
1 of 127

Summary of Content for Canon DP-V2410 Operation Guide PDF

Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.

Readingthisguidewillhelpyoulearntousethevideodisplayproperly.

Storethisguidesafelysothatyoucanuseitinthefuture. English

Instruction Manual

Operation Guide

Video Display

Firmware ver. 1.1 / Firmware ver. 1.4 Firmware ver. 1.3 Firmware ver. 1.5 / Firmware ver. 1.4

2

Table of Content

Introduction 3 Aboutthismanual 3 Trademarks 3

Operating the Video Display 4 BasicoperationstousetheOSDmenu 4 AdjustingImageQualityWhileViewingtheEntire Image 5

TemporarilySavingParameters(AnchorPoint Setting) 7

Enlargingthedisplay(Zoomfunction) 7 ChangingImageQualityAutomaticallyAccording toInputSignal 8

Adjustimagequalityonleft/rightsideofscreen (imagecomparisonmode) 9

Changingthescreendisplayarea 9

Performingcalibrations 10

Export/Import 11 SetDate/Time 14 InputtingCharacters 14 UsingtheFunction(F)Buttons 15 UsingtheChannel(CH)Button 16 CheckingSignalInformationandStatusofthe MainUnit 19

Operatingthevideodisplayusinganexternal device[REMOTEterminal(GPI)] 19

Operatingthevideodisplayusinganexternal device[LANterminal] 20

Operatingthevideodisplayusinganexternal device[USBterminal:Wi-Ficonnection] 21

Useawebbrowsertoremotelyoperatethe videodisplay 23

OSD Menu 26 Adjustment 26 ChannelSettings 48 DisplaySettings 53 AudioSettings 57 MarkerSettings 58 FunctionSettings 65 PictureFunctionSettings 79 Network/IMDSettings 84 SystemSettings 86 SignalInformation 94 SystemInformation 94

Supported Signal Format 95

Image/Frame Display 110

Error Messages 113

Troubleshooting 116

Software Used in This Product 119

Index 124

About the User Manual for the Display

TheproductincludesanInstructionManualorSetupGuide.Beforeusingtheproduct,besuretoread ImportantUsageInstructionsandSafetyInstructionsandHandlingPrecautions.

TheOperationGuide(thisdocument)explainsthefunctionsavailableontheversionofthefirmwareshownon thecoverpageaswellassetupprocedures.

3

Introduction

TheOnScreenDisplay(thereafterreferredtoOSD)defaultlanguagesettingisEnglish.TochangetheOSDmenu languagesetting,pleaserefertop.86.

About this manual ThescreenoftheDP-V3120isusedasanexampleinthisGuide.SomeoftheillustrationusedintheGuidehavebeen simplifiedforclarity.

Conventions used in this manual

:Indicatesareferencepage. Note:Indicatesanote.

Reference:Indicatesreferenceinformation. CAUTION:Indicatesanitemyoumustobserve.

[Adjustment] [PictureMode]:PressingtheMENUbuttonshowstheOSDMenulevels.Youcanmove betweentheitemsandselectfromthem.

Thefollowingsymbolsshowdifferencesinfunctionsandsettingsdependingontheproduct. :Explanationsareapplicabletotheindicatedproducts.

:Indicatesfunctionsonlyavailablewithapaidlicense,forthestatedmodels.

Trademarks HDMI,HDMIlogo,andHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI LicensingAdministrator,Inc.intheU.S.andothercountries.

VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother countries.

Wi-Fi,WPA,andWPA2areregisteredtrademarksoftheWi-FiAlliance.

AppleandSafariaretrademarksofAppleInc.registeredintheUnitedStatesandothercountries.

GoogleandGoogleChromearetrademarksorregisteredtrademarksofGoogleLLC.

Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.

4

OperatingtheVideoDisplay

Usingbuttonsandjogdialonthevideodisplay,youcanadjustimagequalityandconfiguresettingsforinputsignals.In addition,youcanassignfrequentlyusedfunctionstotheCH(Channel)andF(Function)buttons.

Basic operations to use the OSD menu

MENUbutton Opens/closestheOSD menu,ormovesupone levelinamenu.

RESETbutton Resetstheitemstobeadjustedusingthesliderand enteredcharacters.

Jogdial orrotation:Usedtomovetoadifferentitemandchange

settings. Press:Confirmssettingsormovestheselectionframeup/down1level.

ThevideodisplaysettingsarechangedfromtheOSDmenu.

1 Open the OSD menu. PresstheMENUbutton.

2 Select the Main Menu. SelecttheMainMenuitemusingthejogdialandpressitto determinetheselection.

3 Select the Sub Menu. SelecttheSubMenuitemusingthejogdialandpressitto determinetheselection.

MainMenu SubMenu SettingOptions

Operating the Video Display

5

4 Select the setting to change. Selectthesettingtochangeusingthejogdialandpressitto determinetheselection.YouwillbereturnedtotheSubMenu itemselectionscreen.

5 Exit menu. PressingtheMENUbuttonwillreturnyoutotheMainMenu itemselectionscreen.PressingtheMENUbuttonagainwill closethemenuscreen.

Note Toadjustimagequality,warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafter turningonthepowerbeforeuse.

TheOSDmenuandsliderwilldisappearautomaticallyifnooperationisperformedforapproximately1minute.TheFbuttonwill disappearautomaticallyifnooperationisperformedforapproximately10seconds.

Thesettingsthatcannotbeset,aregrayedout.

Thefollowingfunctionscanbereturnedtotheirfactorydefaultsettingsortheiranchorpoint( 7)bypressingtheRESETbutton, afteradjustingtheimagequality. - [Contrast],[Brightness],[Chroma],[Sharpness],[Power],[Saturation],[Offset],[Slope]

When[PictureMode] [User17]:Whenexecutingcalibration,pressingtheRESETbuttonwhileadjustingtheimagequalitywill returnyoutothesettingsaftercalibration.

Adjusting Image Quality While Viewing the Entire Image YoucanadjusttheOSDmenutodisplayasaslideratthebottomofthescreen.Thisallowsfortheimagequalitytobe adjustedwhilstitisdisplayedonthescreen.

1 Press the jog dial when the selection frame is on setting options. Asliderappearsatthebottomofthescreen.

2 Make adjustments using the jog dial with using the slider as guide.

3 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Operating the Video Display

6

Color temperature detailed settings (gain, bias) YoucanadjustRGBallatonceorindividuallywhenthescreensforadjusting[Gain]or[Bias]aredisplayed.

1 Select [Adjustment] [Color Temperature]. [GainR],[GainG],[GainB],[BiasR],[BiasG],and[BiasB]canbesetindividuallyusingthejogdial( ).

2 Select one. Thesettingscreenfor[Gain]or[Bias]willbedisplayed.

3 Switch the guide in the upper right area of the slider screen using the jog dial ( ). Theindicationchangesto[RGB],[R],[G],and[B].Selecting[RGB]willallowyoutoadjustRGBasawhole.

4 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Color temperature detailed settings (xy values)

1 Select [Adjustment] [Color Temperature].

2 Select [Custom (xy)]. Youcanset[x]and[y]individuallyusingthejogdial( ).

3 Select either [x] or [y]. Thecolormapisdisplayed.

4 Adjust [x] with the and [y] with . Theadjustedvalueisindicatedbythe" "markonthecolormap.

5 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Defaultvalue

Lastusedvalue

Currentvalue

Currentvalue

Operating the Video Display

7

Temporarily Saving Parameters (Anchor Point Setting) Youcantemporarilysaveparametersfor[Contrast],[Brightness],[Chroma],[Sharpness],and[HDRRange].See 32 forsettinganchorpointsduringCDLadjustment.

1 Select [Adjustment] [Anchor Adjustment].

2 Press the jog dial, and when the confirmation screen appears, select [OK]. Theparameterissavedandtheanchorpointisset.

3 Adjust the image quality again and press the RESET button on the video display. Returnsyoutotheanchorpointforeachfunction.

CurrentvalueLastusedvalue

Anchorpoint

Note Executing[Adjustment] [Reset]or[SystemSettings] [ResetAllSettings]resetssavedanchorpointsandthesettingsreturn totheirfactorydefaultvalues.

Whencalibrationisexecuted,thevaluesaresavedasanchorpoints.

Enlarging the display (Zoom function) ( 55) Thezoomdisplaypositioncanbeadjusted,andthezoommagnification(2x,4x,8x)canbeselected.

1 Select [Display Settings] [Zoom].

2 Select [Zoom Preset]. Selectapresetzoomdisplay.

3 Select [Position]. Thezoomadjustmentscreenisdisplayed. - Tomovethedisplayposition:Movethejogdial( orrotation).

- Toreturntothecenter:PresstheRESETbutton.

4 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Note WhenmagnifyingtheimageandtheOSDmenuisnotbeingdisplayed, - youcansetthemagnificationratiobypressingthejogdial.

- Youcanmovethedisplaylocationbymovingthejogdial( orrotation).

- YoucansetthefollowingfunctionsusingtheCHbutton: CH1:Selectzoomtype;CH2:Switchbetweenzoompresets(Zoom1/Zoom2/Zoom3);CH3:Zoomoff

Zoom 2 [x4]

Operating the Video Display

8

Changing Image Quality Automatically According to Input Signal Onthisvideodisplay,youcanautomaticallychangetheimagequalityaccordingtovideoresolutionormetadata.

Changing [Picture Mode] automatically ( 51)

1 Select [Channel Settings] [Select Channel]. Selectthechannel.

2 Select [Channel Settings] [Picture Mode] [Type].

3 Select the Type using the jog dial. Changing by individual video resolution (4K/2K) Select[4K/2K].

Changing according to video resolution (4K/2K) or metadata (SDI) Select[Automatic].

4 Select the Picture Mode.

Changing the image quality setting according to video metadata (HDMI) ( 38)

1 Select [Adjustment] [Picture Mode] [User 1-7]. Selectanythingfrom[User1]to[User7].

2 Select [Channel Settings] [Picture Mode] [Type]. Selectotherthan[L/R].

3 Select [Adjustment] [Detail Settings] [HDMI Link] [Automatic Adjustment]. Select[On]. See[HDMILink]( 38)fortheconfigurablesettings.

Note Whenautomaticchangingofimagequalityaccordingtovideoresolution(4K/2K)orSDImetadataisset, informationshowingwhichresolution(4K/2K,etc.)isselectedwillbedisplayedatthetoprightofthe menuscreen.

Operating the Video Display

9

Adjust image quality on left/right side of screen (image comparison mode) Youcandividethescreenintwoandadjusttheimagequalityontheleftandrightsidesofthescreenindividually.

1 Select [Channel Settings] [Picture Mode] [Type]. Select[L/R].

2 Select the screen to adjust image quality. WhentheOSDmenuisopened: - Pressthe inthejogdialwhenthe[Adjustment]mainmenuisselected.

- PresstheCH1buttonwhenthe[Adjustment]mainmenuorsubmenuisselected.

WhentheOSDmenuisclosed:Switchusingthejogdial( ). Eachtimethetargetscreenisswitched,theset[PictureMode]isdisplayedatthetop.

3 Adjust the image quality on the selected screen.

Note WheninImageComparisonmode,aniconshowingwhichscreen(L/R)isselectedforimagequality Adjustment,isdisplayedattherighttopofthe[Adjustment]menuscreen.

Thefunctionsthatcannotbeusedwhentherightscreenisselectedareasfollows: - SubMenuitemsfor[Adjustment]:[Contrast],[BacklightControl],[HDR/SDRView],[Calibration]*1,[PeakLuminanceControl]*2, [BoostContrast]*3

*1 *2 *3

Whentwoscreensaredisplayed,youcanadjusttheimagequalityoneachscreenindividuallyandcomparethem. - Whentwoscreensaredisplayingthesameimage([SingleInputDualView] 52)

- Whentwoscreensaredisplayingdifferentimages([MultiView(Dual)] 49)

- YoucancheckHDR(HighDynamicRange)displayandSDR(StandardDynamicRange)displayside-by-side.([HDR/SDRView] 37)

Changing the screen display area Whenavideosignalof4096x2160isinput,theleftandrightpartswillbetrimmedfordisplay.

1 Select [Display Settings] [Screen Scaling]. Select[NativeInputResolution]or[200%].

2 Press the jog dial ( ) while the OSD menu is closed. Shiftstotheleftorright.

Operating the Video Display

10

Performing calibrations ( 37) Youcanperformcalibrationusinganexternalsensor,withoutusingacomputer. ThesupportedexternalsensorsareKonikaMinoltaDisplayColorAnalyzersCA-310andCA-210.Besuretoalsoread theinstructionmanualoftheCA-310andCA-210. ThevideodisplaycanperformmeasurementorcalibrationofthedisplayusingtheDP-VColorAdjustmentsoftware. RefertotheCanonwebsitefortheDP-VColorAdjustment.

1 Connect the display color analyzer to the USB port of the main unit.

2 Select [Adjustment] [Picture Mode] [User 17].

3 Select [Adjustment] [Detail Settings] [Calibration]. Seteachtargetvalue.

4 Select [Start]. Pleasefollowtheinformationindicatedonthescreen.

5 Initialize the sensor. SetthemodedialoftheUniversalMeasuringProbeto[0-CAL]. Pressthejogdialofthevideodisplay,select[OK],andexecuteinitialization.

6 Place the universal measuring probe pointing at the center of the video display. Setthemodedialoftheuniversalmeasuringprobeto[MEAS]andplacetheprobeasshownbelowaccordingto thedisplayedcontent.Pressthejogdialofthevideodisplay,select[OK],andexecutecalibration.

KonicaMinoltaUniversalMeasuringProbe CA-310support:CA-PU32,CA-PU35 CA-210support:CA-PU12,CA-PU15

KonicaMinolta DisplayColorAnalyzerCA-310,CA-210

FortheDP-V2411

7 Finish calibration. Whenthemessage[Calibrationiscompleted.]isdisplayed,pressthejogdialandselect[OK].

Ifthemessage[Calibrationerror.]isdisplayed. Calibrationhasbeenterminatedduetoanerror.Themainunitreturnstothestatebeforecalibration.( 113)

Tocancelcalibration Pressthejogdialduringcalibrationandselect[Cancel].Themainunitreturnstothestatebeforecalibration.

Operating the Video Display

11

Note Performmatrixcalibrationofthedisplaycoloranalyzerpriortocalibration.Ifcalibrationisperformedwithoutperformingmatrix calibration,anerrormayoccur.RefertotheCA-310andCA-210instructionmanualforthedetailoperation.

Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepowerbefore performingcalibration.

Performcalibrationinadarkroomsothatnoexternallightentersthesensor.Ifexternallightentersthesensor,lowbrightness characteristicscannotbecalibratedcorrectly.

DuetothecharacteristicofLCDpanelandindividualdifferenceofCA-310andCA-210,thecalibrationresultsmaydiffer.

Export/Import Youcanexport/importLUTandCDLparametersaswellasmainmenusettings.

LUT Import ( 35)

1 Insert the USB memory stick containing the LUT file into the USB port of the video display.

2 Select [Adjustment] [Detail Settings] [LUT Import].

3 Select the LUT file to import. Inthe[Filename]field,searchanddisplayafilewithextension".clut"and".cube"intherootfolder.

4 Select the LUT type. Refertothe"ConceptDrawingofDisplayImageProcessingandLUT"( 12).

5 Select the LUT No. to save the LUT.

6 Select the color gamut that will be the standard (when [Gamut LUT] under [LUT Type] is selected). SelectthecolorgamutusedwhencreatingtheLUT.

7 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Importstarts.

Note Importof[1D-LUT]and[3D-LUT]canalsobesetfrom[Adjustment] [CDL/UserLUT] [1D-LUT]or[3D-LUT] [LUTImport].

TheLUTfile(.clutformat)isproprietarytoCanonVideoDisplay.RefertotheCanonwebsiteforthefileformatandhowtocreate theLUTfile.

Upto1000LUTimportfilesarerecognized.

YoucandeletetheimportedLUT,aswellasrenametheLUT( 36).

TheconfigurationofLUTfiles(cubeformat)isshownbelow.

LUT filename

Type of characters that can be used One-bytealphabeticalcharactersandnumbersonly

No. of characters that can be used Upto48characters(includingtheextension)

Extension .cube

Operating the Video Display

12

LUT file format

TITLE ASCII24characterscanbeused. *DisplayedintheOSDmenuofthedisplayasaselectionitem.(Upto24characters)

LUT_1D_SIZE Specifyonefrom128/256/512/1024/2048/4096.

LUT_3D_SIZE Specifyonefrom9/17/33/65.

Table Data For1D-LUT,onlyRedisenabled.(GreenandBluearenotused.)

DOMAIN_MIN DOMAIN_MAX LUT_1D_INPUT_RANGE LUT_3D_INPUT_RANGE

Unsupported.

Forthelinefeedcode,useCR(carriagereturn),LF(linefeed),orCR+LF.

Forthecharactercode,useShift-JIS,EUC-JP,orUTF-8(with/withoutBOM).

Filesinwhichboth1D-LUTand3D-LUTarewrittenarenotsupported.

Concept Drawing of Display Image Processing and LUT

Range conversion

1D-LUT (UserLUT)

Range conversion

CDL/3D-LUT (UserLUT)

1D-LUT (GammaLUT)

3D-LUT (Gamut LUT)

ImportImport

ImportImport

Gamma 2.2

Color Gamut (User selectable)

Color Temperature (User selectable)

(fixed)

Color Temperature

Base Color Gamut

CDL/3D-LUT (UserLUT)

1D-LUT (GammaLUT)

3D-LUT (Gamut LUT)

Import Import Import

Gamma 2.2

Color Gamut (User selectable)

Color Temperature (User selectable)

(fixed)

Color Temperature

Base Color Gamut

Operating the Video Display

13

Export/Import Main Menu Settings ( 90)

1 Select [System Settings] [Export/Import].

2 Select [Export] or [Import].

Exporting 1Select[Target]from[USB],[User1]to[User3]or[LAN]. Export[USB]totheUSBmemoryand[User1]to[User3]tothebuilt-inmemoryofthemainunit.Whenyou select[LAN],thefileisexportedtoadisplayconnectedviaLAN. 2Ifyouselected[USB]or[User1]to[User3],select[Filename]. Thefactorydefaultis[dinfo_dpv****.dat](****:Numberoftheproductname).Youcanchangethenameof thefiletobeexportedtotheUSBmemorywithin16one-bytecharactersincludingalphabeticalcharacters, numbers,andsymbols. Ifyouselected[LAN],select[Display]. SelectthedisplaytowhichtoexportthesettingsfromthedisplaysconnectedviaLAN.

Importing 1Select[Target]from[USB]or[User1]to[User3]. Specifythedestinationtosavethefiletobeimported. 2Select[Filename]when[USB]isselected. 3In[Settings],select[All]orMainMenuname.

3 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Export/Importstarts.

Note Afterexportto[User1]to[User3],youcanselecttheconfigurationsatstartupfrom[User1]to[User3]in[PoweronSetting]in [SystemSettings]( 90).

Toexportthisdevice'ssettingstootherCanondisplays: - Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges,somesettingswillnotbecorrectlyexported (settingswillnotbechanged,willreverttofactorydefaults,etc.)

- Whentheexportiscompleted,amessagewillappearonthetargetdisplay.

Exporting/Importing CDL Parameters ( 32)

1 Select [Adjustment] [CDL/User LUT].

2 Select [CDL 1-8].

3 Select [Detail Settings] [CDL Export] or [CDL Import].

Exporting 1Select[CDLPreset]. 2Selectafileformat".ccc"or".cdl".

Importing 1Select[Filename]. 2Select[CDLPreset].

4 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Export/Importstarts.

Operating the Video Display

14

Note Theexportedfileisautomaticallysavedunderthename"YYYYMMDDhhmmss_Presetname.ccc(cdl)".

Upto1000CDLimportfilesarerecognized.

Set Date/Time ( 86) ThissectiondescribeshowtosetthevideodisplayDate/Time.ThevideodisplayDate/Timewillberesetifthepower cordisnotconnectedforapproximately20days.

1 Select [System Settings] [Date/Time]. AscreentoinputtheDate/Timeappears.

2 Set the Date/Time. Theselectionframemovesandnumberschangeasyouoperatethejogdial.Repeatuntilyoucompletesetting theyear,month,date,hour,andminute.

3 Press the jog dial when you are finished. Theselectionframemovesto[OK].

4 Check the content and press the jog dial to confirm the settings.

Reference Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe displayed.

Inputting Characters Thissectiondescribeshowtoinputthecharacters.

1 When the character input screen is displayed, use the jog dial ( ) to select the area you wish to input.

2 Select characters using the jog dial ( or rotation). Thefollowingcharacterscanbeselected:Press buttonstodisplaythemonebyone.

Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:,.:;`-+/=%&!?#_|$^~@{}[]<>

()space Charactersthatcannotbeenteredareautomaticallyskipped.

3 Repeat steps 1 and 2 until the desired text has been input.

4 Press the jog dial when you are finished. Theselectionframemovesto[OK].

5 Check the content and press the jog dial to confirm the settings.

Reference Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe displayed.

Toeraseacharacterintheselectionframe,presstheRESETbuttononthevideodisplay.

Operating the Video Display

15

Using the Function (F) Buttons YoucanassignfunctionstotheFbuttonsonthevideodisplaytoexecutetheminstantly.Youcanassigndifferent functionsonFbuttonsinthenormalandCDLmodesrespectively.

1 Select [System Settings] [Function/Channel Button] [Display Function] or [Display Function (CDL)]. Thebuttonselectionscreenwillbedisplayed.

2 Select the button name and press the jog dial.

3 Select the function to assign. Refertothe"FunctiontoallowregistrationforthedisplayFbuttons( 92)"fortheavailablefunctions.

4 Press the jog dial. Thesettingisconfirmed.

Thefollowingcontentisassignedtofunctionbuttonsonthevideodisplaybyfactorydefault.

Fbutton Normalmode CDLmode

F1 PictureMode CDL/UserLUT

F2 Brightness CDLSOP/SAT

F3 TC/ALM CDL/UserLUTBypass

F4 WFM/VEC SingleInputDualView

F5 Histogram/FrameLuminance FalseColor

F6 PixelValueCheck RangeCheck

F7 ZoomPreset 2020OutsideofGamutView

F8 FrameHold BoostContrast PeakLuminanceControl

CompareView

Reference HoldingtheFbuttondownwilldisplaythefunctionselectionscreen,andyoucansetthefunctionyouwishtoregister.

YoucancheckthefunctionassignedtotheFbuttonsofthemainunit. Openthe [SystemSettings] [OSDSettings] [FunctionButtonGuide]menuandselect[On].Pressing/movingthe

jogdial( ,orRotate)whileOSDisnotshowingwilldisplaythelistoffunctions.Selectingafunctionfromthelistand

pressing/moving( )thejogdialwilldisplaythedetailedsettingsscreen,orexecutethatfunction.

Pressing whilethelistoffunctionsisdisplayedswitchesbetweennormalmodeandCDLmode.

Operating the Video Display

16

Using the Channel (CH) Button Youcanassignchannels(varioussettingsrelatedtoinputsignal)totheCHbuttonsonthevideodisplayandswitch channelsinstantly.

1 Select [System Settings] [Function/Channel Button] [Display Channel]. Thebuttonselectionscreenwillbedisplayed.

2 Select the button name and press the jog dial.

3 Select the channel to assign. See[ChannelSettings]( 48)fortheconfigurablesettings.

4 Press the jog dial. Thesettingisconfirmed.

Operating the Video Display

17

Thefollowingcontentisassignedtochannelbuttonsonthevideodisplayandtoeachchannelbyfactorydefault.

CH CH1 CH2 CH3 CH4 CH5

InputConfiguration 12-3G/HD-SDI HDMI 3G-SDIRAW 12-3G/HD-SDI 12-3G/HD-SDI

3G/HD-SDI HDMI 3G-SDIRAW 3G/HD-SDI 3G/HD-SDI

6G/3G/HD-SDI HDMI 3G-SDIRAW 6G/3G/HD-SDI 6G/3G/HD-SDI

SelectInputSignal Automatic Automatic Automatic Automatic Automatic

ImageDivision Automatic Automatic Automatic Automatic Automatic

LinkOrder Automatic Automatic Automatic Automatic Automatic

Format Automatic Automatic Automatic Automatic Automatic

AudioInput Automatic Automatic Automatic Automatic Automatic

Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA

InternalSync Off Off Off Off Off

ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)

PictureMode Type Normal Normal Normal 4K/2K L/R

PictureMode PictureModeL Resolution4K

ITU-RBT.709 ITU-RBT.709 CINEMAEOS SYSTEM

User1 (2020PQ)

User1 (2020PQ)

PictureModeR Resolution2K

ITU-RBT.709

Payload UHD/PQ User1(2020PQ)

UHD/HLG User2(2020HLG)

UHD ITU-RBT.2020

709/PQ

709/HLG

709 ITU-RBT.709

VANC

Unknown

Camera CINEMAEOS SYSTEM

CINEMAEOSSYSTEM

ARRI User6

VARICAM User7

SingleInputDualView Off Off Off Automatic Off

Separator Off Off Off Off White

Operating the Video Display

18

CH CH6 CH7 CH8 CH9 CH10 and up

InputConfiguration 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI (Notset)

3G/HD-SDI 3G/HD-SDI 3G/HD-SDI 3G/HD-SDI (Notset)

6G/3G/HD-SDI 6G/3G/HD-SDI 6G/3G/HD-SDI 6G/3G/HD-SDI (Notset)

SelectInputSignal Automatic Automatic Automatic Automatic Automatic

ImageDivision Automatic Automatic Automatic Automatic Automatic

LinkOrder Automatic Automatic Automatic Automatic Automatic

Format Automatic Automatic Automatic Automatic Automatic

AudioInput Automatic Automatic Automatic Automatic Automatic

Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA

InternalSync Off Off Off Off Off

ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)

PictureMode Type L/R 4K/2K L/R L/R Normal

PictureMode PictureModeL Resolution4K

User1 (2020PQ)

User2 (2020HLG)

User2 (2020HLG)

User2 (2020HLG)

ITU-RBT.709

PictureModeR Resolution2K

ITU-RBT.709

Payload UHD/PQ User1(2020PQ)

UHD/HLG User2(2020HLG)

UHD ITU-RBT.2020

709/PQ

709/HLG

709 ITU-RBT.709

VANC

Unknown

Camera CINEMAEOS SYSTEM

CINEMAEOSSYSTEM

ARRI User6

VARICAM User7

SingleInputDualView Automatic Automatic Off Automatic Off

Separator Off Off White Off Off

Note HoldingtheCHbuttondowndisplaysthechannellist,allowingtheusertoselectthedesiredchannel.When[SelectInputSignal] issetto[Automatic],theinputsignallistisdisplayedandthesignalcanbechangedtemporarily*. * Whenonlythe12G-SDI/6G-SDIsignalisinputorwhenavideothatcanbesimultaneouslydisplayedwiththe 12G-SDI/6G-SDIsignalisinput

Whenonlythe6G-SDIsignalisinputorwhenavideothatcanbesimultaneouslydisplayedwiththe6G-SDIsignalisinput

Operating the Video Display

19

Checking Signal Information and Status of the Main Unit Thevideodisplayisequippedwithabannerdisplayfunction.

1 Press the jog dial when the OSD menu is closed. Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwill automaticallydisappearafter6seconds.

Note Youcanselecthowthebannerisdisplayed([Banner] 87).

Youcanmonitortheinputsignalstatus.([SignalMonitoring] 72)

Formoredetailedsignalinformation,pleaserefertothesectionon[SignalInformation]( 94).

The[Detectingsync.]bannerwillcontinuetoappearuntiltheinputsignalissynchronized.

Operating the video display using an external device [REMOTE terminal

(GPI)] YoucanoperatethevideodisplayusinganexternaldeviceconnectedtotheREMOTEterminalandexecutethe functionsregisteredineachpin.Remoteoperationispossibleonlywhenthevideodisplayisturnedon.

PinlayoutforREMOTEterminal PinNo. Signal Factorydefault

1 Pin1 CH1

2 Pin2 CH2

3 Pin3 CH3

4 Pin4 TimeCode

5 Pin5 TallyGreen Atallyappearsatthe topofthescreen.*6 Pin6 TallyRed

7 Pin7 PowerOn

8 Pin8(GND)

* Thetallylightlights.

1 Connect an external control device to the REMOTE terminal.

2 Select [System Settings] [Remote(GPI)]. Thepinselectionscreenwillbedisplayed.

3 Select a pin number and press the jog dial.

4 Select the function to assign. Pleasesee[Remote(GPI)]( 86)forsettablefunctions.

5 Press the jog dial. Thesettingisconfirmed.

Operating the Video Display

20

Operating the video display using an external device [LAN terminal] ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperatethevideodisplay usinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersandtallylightsonthescreen.Thereare twotallylights,ontheleftandright.Upto16characterscanbedisplayed.

Tallydisplay(left) Characterdisplay Tallydisplay(right)

1 Connect an external control device to the LAN terminal.

2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.

3 Select [Network/IMD Settings] [In Monitor Display].

4 Select [Control] [TSL Ver. 5.00]. Thiswillallowoperationfromanexternalcontroldevice,anddisplaycharactersandtallylights.

5 Select [Position] [Top] or [Bottom]. Thissetsthepositionwherecharactersandtallylightswillbedisplayed.

Note When[MultiView(Dual)]or[MultiView(Quad)]isdisplayed,setthe[INDEX]settingtofrom[0x0001]to[0x0004].

Theportnumberforthecontrollingisfixedat"45000".

With[InMonitorDisplay]youcanalsodisplayuser-selectedcharactersonthescreen.( 85)

Operating the Video Display

21

Operating the video display using an external device [USB terminal: Wi-Fi

connection] AWi-FiadaptercanbeconnectedtotheUSBterminalofthevideodisplaysothatthevideodisplaycanbeconnected toaportableterminalintheWi-Finetworkenvironmentinuse.Thefollowingtwomethodscanbeusedtoconnect: Infrastructure:ThismethodconnectstoWi-Fiviaanaccesspoint. AccessPoint:Thisdeviceactsasanaccesspoint,andthismethodconnectsthedevicedirectlytotheWi-Fidevice. NetworksettingssuchasIPaddressandsubnetmaskareacquiredautomatically.

Supportedencryptionschemes Infrastructure:WEP64(ASCII),WEP128(ASCII),WPA-TKIP,WPA-AES(CCMP),WPA2-TKIP,WPA2-AES(CCMP) AccessPoint:WPA2-AES(CCMP)

CAUTION Notethatwecannotacceptanyliabilityfordamagesthatariseasaresultofincorrectsettingsmadeonthenetworktouse networkfunctionsandfordamagethatariseasaresultofuseofthisfunction.

AvoidconnectingtoWi-Fiornetworkenvironmentsthatarenotprotectedbyappropriatesecuritymeasures.Rememberto changethedefaultpasswordwhensettingtheaccesspoint.Doingsomaycausethecustomerspersonalinformationorother importantinformationtoleaktoathirdparty.WhennotusingWi-Fi,set[Wi-Fi] [Control]to[Off].

ThespecificationsandrestrictionsofWi-FiconnectionmethodsdifferdependingontheWi-Finetworkinuse.

ThereisnoguaranteethattheWi-Fiadapterfunctionsinusewillworkonthevideodisplay.ForinformationaboutWi-Fiadapter relateddefects,contactthedevicemanufacturer.Also,invariouscountriesandregions,approvalisneededtousetheWi-Fi adapter,anduseofnon-approvedWi-Fiadaptersisnotpermitted.Ifyouareunclearofwhetherornotuseisapproved,check withthedevicemanufacturer.

Note Forinformationonequipment(Wi-Fiadapter)forwhichoperationhasbeentested,pleasecheckwiththedistributorfromwhere theproductwaspurchased.

FordetailsonhowtousetheWi-Fiadapter,precautionsforuse,howtosetaccesspoints,andotherinformation,eitherreferto thedeviceInstructionManualorcontactthemanufacturer.

Upto24accesspointscanbedisplayedandselectedonthevideodisplay.

1 Connect the Wi-Fi adapter to the USB terminal.

2 Select [Network/IMD Settings] [Wi-Fi].

When using the [Infrastructure] method

3 Select [Control] [Infrastructure].

4 Set the access point to connect to.

5 If a password is needed when connected to an access point, enter the password ( 84). Thisissetusingupto24alpha-numericalcharactersandsymbols.Thefollowingcharacterscanbeentered. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-

Operating the Video Display

22

When using the [Access Point] method

3 Select [Control] [Off].

4 Select [Access Point] ( 84). EntertheSSID.Thisissetusingupto24alpha-numericalcharactersandsymbols. Setthecommunicationmode. Setthechannel. Enterthepassword.Thisissetusingbetween8and24alpha-numericalcharactersandsymbols. [SSID],[Password]:Thefollowingcharacterscanbeentered. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-

5 Select [Control] [Access Point].

Operating the Video Display

23

Use a web browser to remotely operate the video display AwebbrowsercanbeusedtoremotelyoperatethevideodisplayusingacomputerterminalconnectedtotheLAN terminaloraportableterminal( 21)connectedviaaWi-FiadaptertotheUSBterminal.Fromthedeviceconnectedto thenetwork,youcanchangeimagequalitysettingsorswitchchannels. Thisfunctionchecksoperationusingthefollowingwebbrowsers. Safari(Apple)

GoogleChrome(Google)

*CorrectoperationcannotbeguaranteedonallsupportedOSorwebbrowsereditions.

CAUTION RemembertochangethedefaultsettingsforIDandPasswordwhenusingthisfunction.

Note Accessisonlypossiblefromasingleterminal.

ThisfunctionmaynotworkifthevideodisplayisaccessedusingLANandaWi-Fiadapter,atthesametime.

Openingmultiplepagesinmultipletabsonthewebbrowsercancauseittonotfunctionproperly.

Executing[Capture]inthe[View]screencancausethevideoonthisvideodisplaytopausetemporarily.

Operatingthevideodisplayitselfwhileitisbeingaccessedfromawebbrowsercancausethenetworkconnectiontobelost.

Adelaymayoccurinvideodisplayorinthevarioussettingsdependingonthenetworkenvironmentandcommunication conditions.

TheIPaddresscanbecheckedinthe[SystemInformation]screen.

TheoperationscreenonlydisplaysEnglish.

1 Connect external control devices via the network.

2 Select [Network/IMD Settings] [Web].

3 Select [Control] [On].

4 Select [User ID] and [Password] ( 84). [UserID]:EntertheuserID.Thisissetusingupto16alpha-numericalcharactersandsymbols. [Password]:Enterthepassword.Thisissetusingbetween8and16alpha-numericalcharactersandsymbols. Thefollowingcharacterscanbeentered. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-

5 Start up a web browser on the device connected to a network.

6 Enter the IP address of this video display in the address bar. Theremoteoperationscreenisdisplayedonthewebbrowser. Whenthebasicauthenticationscreenisdisplayed,entertheuserIDandpassword.

7 When operation ends, close the web browser.

Operating the Video Display

24

Operation screen

[View] screen Afterpressingoneoftheimagecapturebuttons,thecapturedimagewillbedisplayed.YoucanalsooperatetheCH buttonsandFbuttons(function/channelbuttons).

Capturedimage Thepositioncanbemovedbyselectingthepixelposition in[PixelValueCheck].

Imagecapturebutton ( Itdoesnothavethe[AUTO]or[STOP]button.)

[FULL] Enlargesthecapturedimage.

[Control] screen AllowsthePictureMode,Channel,andvariousmarkerdisplaystobeset.

[Value/Name]* Entercharactersornumbers. [Get]:Acquiresinputdata. [Set]:Appliesthedatatotheinputscreen.

[Zoom/PixelValue] Setsthedisplaypositionfor[Zoom]orthepixel positionfor[PixelValueCheck].

* [Value] [Value]doesnotshowdecimalpoints. Dependingonthesettingitem,thevaluemaybedifferentfrom thevaluedisplayedonthemenu.

Operating the Video Display

25

[Setting] screen YoucanimportLUT,exporttheerrorlogof[FrameLuminanceMonitor]aswellas[SignalMonitoring],andimportor exportthesettingsonthevideodisplay.

[LUTImport(1D-LUT)]*,[LUTImport(3D-LUT)] ImportsaLUT.(* only)

[FrameLum.MonitorExport] Exports[FrameLuminanceMonitor].Exporting[Frame LuminanceMonitor]willcreatea"latest.csv"fileforthe luminanceinthefinalscreenandan"All.zip"file(afile compressedusingthezipmethod)thatcontainsall acquiredluminanceinformation.

[SignalMonitoringLogExport] Exportstheerrorlogof[SignalMonitoring].

[lnformation] screen Displaysthesettingsfor[Adjustment]and[ChannelSettings],andinformationfor[SignalInformation]and[System Information].

[Link] screen YoucandisplayalistofthedisplayconnectedviaLANtothisvideodisplay,set[DisplaySettingLink],andchange thedisplaynames.

26

OSDMenu

Adjustment Thismenuisusedtoadjusttheimagequality.Thefactorydefaultsdifferaccordingtothe[PictureMode]setting.( 43)

Sub Menu Setting Options (Bold: factory default)

PictureMode

SMPTE-C EBU ITU-R BT.709 ITU-RBT.2020 AdobeRGB DCI-P3 User1(2020PQ) User2(2020HLG) User3(DCIPQ) User4(DCIPQD65) User5~User7 CINEMAEOSSYSTEM ACESproxy(ver.1.0.1)

Selectapresetmode.

[SMPTE-C],[EBU],[ITU-RBT.709],[ITU-RBT.2020],[AdobeRGB], [DCI-P3]:Modesettothebrightness,colortemperature,gamma/EOTF,

andcolorgamutofthethreeprimarycolorschromaticitypointsof eachstandard.

[User17](User1(2020PQ),User2(2020HLG),User3(DCIPQ), User4(DCIPQD65),User5~User7):Thismodeallowsyoutoseteach

itemin[Adjustment]individually.Youcanchangethemodename within24one-bytecharactersincludingalphabeticalcharacters, numbers,andsymbols( 39).

[CINEMAEOSSYSTEM]:CanonLogistheidealmodefordisplaying imagescapturedwithCinemaEOScameras.UsingCameraLink,you canhavetheimagequalitysettingchangeautomatically([Automatic Adjustment(CINEMAEOS)] 74).

[ACESproxy(ver.1.0.1)]:AmodetodisplayACESproxyvideosinoptimum gamma/EOTFandcolorgamut.

[ACESproxy(ver.1.0.1)]cannotbesetwhen[ChannelSettings] [PictureMode] [Type]are[L/R],[4K/2K]or[Automatic].

Contrast Adjuststhewhiteleveloftheimage.(Incrementsof1)

0to20000 * When[PeakLuminanceControl] [On] **When[BoostContrast] [On]

When[ChannelSettings] [PictureMode] [Type]is[L/R],[Contrast]cannot beadjustedatthe[PictureMode]settingfortherightscreen.Therightscreen's settingwillbethesameassetfortheleftscreen.

When[PeakLuminanceControl]is[On],[Contrast[Peak Control]]isdisplayed.

When[BoostContrast]is[On],[Contrast [BOOST]]isdisplayed.

When[PictureFunctionSettings] [CompareView] [Enable] [On] andalso[CompareView] [Type] [Luminance],thesettingsarefrom[1000] to[20000].

WhenusingDCpower,theupperlimitofthesettingvalueis[1000] when[BacklightControl]issetto[LocalDimmingHigh/Low].

0to6000 0to12000*

0to6000 0to10000**

0to1500 1500to4000**

0to3000 0to6000

0to10000**

Brightness -500to500(0) Adjuststheblackleveloftheimage.(Incrementsof1)

Chroma 0to2000(1000) Adjuststhecolorsaturationoftheimage(colordepth).(Incrementsof1)

Canonlybeadjustedwhen[CDL/UserLUT]is[CDL1-8]or[Off].

Sharpness 0to100(0) Adjuststhesharpnessoftheimage.(Incrementsof1)

OSD Menu

27

Sub Menu Setting Options (Bold: factory default)

BacklightControl Switchesthebacklightcontrolmethod.

LocalDimming Automatic/High/Low, Off

[LocalDimming]:Localdimmingtechnologycontrolstheamountoflight emittedbythebacklightforeachdisplayarea.Thebacklightofbright areaisincreasedandthedarkareaisdecreasedaccordingtothe displayedcontent.

[GlobalDimming]:Globaldimmingistheabilitytocontroltheamountof lightemittedbythebacklightontheentirescreen.Iftheimageis dark,thewholedisplayisdarkened.

* When[BoostContrast] [On]

[Automatic]:ThismodeissuitableforcheckingHDRimages.

[High]:Thismodeissuitableforcheckingimageswithalotofbright areas. [Low]:ThismodeissuitableforcheckingSDRimages.

When[PeakLuminanceControl]issetto[On],youcannotselect [BacklightControl].

When[BoostContrast]issetto[On],[BacklightControl]turnsto[Off]. When[LocalDimmingHigh/Low]isselectedand [BoostContrast]issetto[On],itturnsto[GlobalDimming].

When[GlobalDimming]isselected,the contrastmaychangetemporarilyinordertomaintaingradationdependingonthe image.Ifthisisundesirable,turnit[Off]andseeifitimproves.

When[ChannelSettings] [PictureMode] [Type]is[L/R],[BacklightControl] cannotbesetatthe[PictureMode]settingfortherightscreen.Therightscreen's settingwillbethesameassetfortheleftscreen.

LocalDimming High/Low,Off

LocalDimming High/Low,Off

*GlobalDimming,Off

LocalDimming Automatic/High/Low, GlobalDimming,Off

LocalDimming High/Low,Off

*Global Dimming,Off

ColorTemperature D93,D65,D65Custom, D61,D60,D56,D50, DCI-P3 Custom(xy),Off

Whenapresetis selected

GainR/G/B: 0to1023 BiasR/G/B: -500to500(0) WhenCustom(xy)is selected

x:0.260to0.360 y:0.260to0.360

Setsthecolortemperature.( 6)

[D93],[D65],[D61],[D60],[D56],[D50],[DCI-P3]:Selectfrompresetcolor temperatures.

[D65Custom]:Thispresetisforadjustingthecolorofthevideodisplay anddisplayshavingdifferentdisplaycharacteristics.Thegainand biasareadjustedbasedonD65.

[GainR/G/B],[BiasR/G/B]:Adjuststhepresetcolortemperature. (Incrementsof1)

[Custom(xy)]:AdjustsCIExandy.(Incrementsof0.001)

[Custom(xy)]and[GainR/G/B]or[BiasR/G/B]cannotbeselectedatthesame time.

When[GainR/G/B]or[BiasR/G/B]valueisadjusted,anasterisk[*]isdisplayed bycolortemperaturepresetmode.

Thedisplayedcolorcoordinates(x,y)arejustaguideandnotguaranteed absolutevalues.

OSD Menu

28

Sub Menu Setting Options (Bold: factory default)

ColorGamut SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3 Native CinemaGamutto709 CinemaGamutto2020 CinemaGamuttoDCI DCI-P3+to709 DCI-P3+toDCI S-Gamut3to709 S-Gamut3to2020 S-Gamut3toDCI S-Gamut3.Cineto709 S-Gamut3.Cineto2020 S-Gamut3.CinetoDCI GamutLUT1to GamutLUT8

Setsthecolorrange.

When[PictureMode] [User17]or[CINEMAEOSSYSTEM] [SMPTE-C],[EBU],[ITU-RBT.709],[ITU-RBT.2020],[AdobeRGB], [DCI-P3]:Colorgamutcomplianttoeachstandard. [Native]:Colorgamutthatcanbedisplayedbythisvideodisplay. [CinemaGamutto709],[CinemaGamutto2020], [CinemaGamuttoDCI],[DCI-P3+to709],[DCI-P3+toDCI]:Modes

wherethecolorgamutisconvertedtomonitorCinemaGamutand DCI-P3+videosrecordedbytheCinemaEOScameras.

[S-Gamut3to709],[S-Gamut3to2020],[S-Gamut3toDCI], [S-Gamut3.Cineto709],[S-Gamut3.Cineto2020], [S-Gamut3.CinetoDCI]:Presetmodeswherethecolorgamutis

converted. [GamutLUT1]to[GamutLUT8]:SelectsanexternalLUT.

[ColorGamut]cannotbesetinthefollowingcases. - When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-

HLG-1K-200)],[VARICAM(V-LogtoV-709)],[RED(Log3G10to709/1886)],

[RED(Log3G10to2020/PQ)],[2020PQto2020SDR],[2020PQto709

SDR],[2020HLGto709HLG]or[2020HLGto709SDR]isselected.

ForcheckingthevideocapturedwithCinemaEOScameras,pleaserefertothe "ParameterofCinemaEOScamerasandCanondisplays( 77)".

OSD Menu

29

Sub Menu Setting Options (Bold: factory default)

Gamma/EOTF 1.0,2.2,2.35,2.4,2.6, ITU-RBT.1886 SMPTEST2084(PQ) HybridLog-Gamma HybridLog-GammaRGB CanonLog CanonLog(HDR) CanonLog2 CanonLog2(HDR) CanonLog3 CanonLog3(HDR) S-Log2(HDR) S-Log3(HDR) GammaLUT1to GammaLUT8 Off

SetstheGamma/EOTF.

[1.0],[2.2],[2.35],[2.4],[2.6],[ITU-RBT.1886],[CanonLog],[CanonLog2], [CanonLog3],[S-Log2(HDR)],[S-Log3(HDR)]:Selectthepresetgamma. [SMPTEST2084(PQ)],[HybridLog-Gamma],[HybridLog-GammaRGB], [CanonLog(HDR)],[CanonLog2(HDR)],[CanonLog3(HDR)]:Selectthe

gamma/EOTFforHDRdisplay. [GammaLUT1]to[GammaLUT8]:SelectsanexternalLUT.

About[HybridLog-Gamma] Thisvideodisplaysupportsthefollowingtwomethods. [HybridLog-Gamma]:Thismethodprocessesthesystemgammaforthe

Ysignal(CompliantwithITU-RBT.2100). [HybridLog-GammaRGB]:Thismethodprocessesthesystemgamma

fortheRGBsignal. Ifusing[HybridLog-Gamma]thenthesystemgammavaluewillbe displayedinthe[SettingOptions]onthemenuscreen.

Notsettableinthefollowingcases: - When[ACESproxy(ver.1.0.1)]isselectedin[PictureMode]

- When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-

HLG-1K-200)],[VARICAM(V-LogtoV-709)],[RED(Log3G10to709/1886)],

[RED(Log3G10to2020/PQ)],[2020PQto2020SDR],[2020PQto709

SDR],[2020HLGto709SDR]isselected.

ForcheckingthecapturedvideowithCinemaEOScamerasandARRI/ Panasoniccinemacameras,pleasereferto[CameraLink] [Automatic Adjustment]( 74).

Relationshipbetween[ColorGamut]and[Gamma/EOTF]thatcanbeselected ( 40).

OSD Menu

30

Sub Menu Setting Options (Bold: factory default)

HDRRange SetsthedisplaymethodwhenGamma/EOTFforHDRdisplayisselected.

SMPTEST2084(PQ) 100to10000(1000, 2000)

Setsthe[SMPTEST2084(PQ)]dynamicrangetobedisplayed,from0.005 to10,000cd/m2(nits).(100to4000:100increments.4000to10000: 1000increments)

HybridLog-Gamma 100to1000 Setshowfartodisplaythe[HybridLog-Gamma]dynamicrange. (inincrementsof100) Theupperlimitvaluewillchangetomatchthesettingsof[HLGSystem Gamma].( 37)

HybridLog-Gamma RGB

100to1000/2000

CanonLog(HDR) 100to800 Setsthe[CanonLog]dynamicrangetobedisplayed,from0to800%.(in 100increments)

CanonLog2(HDR) 100to1600 Setsthe[CanonLog2]dynamicrangetobedisplayed,from0to1600%. (in100increments)

CanonLog3(HDR) 100to1600 Setsthe[CanonLog3]dynamicrangetobedisplayed,from0to1600%. (in100increments)

S-Log2(HDR) 100to1400(1000) Setshowfartodisplaythe[S-Log]dynamicrange.(in100increments)

S-Log3(HDR) 100to3900(1000)

GammaLUT1to GammaLUT8

512to1023 Setshowfartodisplaythe10-bitLUTdatadynamicrange,from0to 1023.(in1increments)

Settingprocedures Theexplanationuses[SMPTEST2084(PQ)]asanexample.

Whensetat[2000],thoseareasthatexceed2,000cd/m2areclipped,andthosethatare2,000cd/m2orbelowareassigned tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof2,000cd/m2,youcanchecktheentire dynamicrangeoftheimage.Also,whendisplayinganimagewithaPQof4,000cd/m2,youcanchecktheimageupto 2,000cd/m2. Whensetat[2000],thoseareasthatexceed4,000cd/m2areclipped,andthosethatare4,000cd/m2orbelowareassigned tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof4,000cd/m2,althoughtheapparent brightnesslowers,youcanstillcheckallthedynamicrangeoftheimage. ThebrightnessofthevideodisplaycorrespondstothevaluesetforContrast.

4,000 cd/

2,000 cd/

4,000 cd/

2,000 cd/2,000 cd/ 2,000 cd/

SMPTE ST 2084 (PQ) 4,000 cd/m2 signal

(Contrast: [20000])

SMPTEST2084(PQ):Setto[4000]SMPTEST2084(PQ):Setto[2000]

SMPTEST2084 (PQ)range

SMPTEST2084 (PQ)range

Rangeof DP-V3120

Rangeof DP-V3120

Gradationisreproducedbyassigning therangetotherangeofthe DP-V3120(whichlowers thebrightness).Clip(Saturatesgradation.)

Brightnessvalue correspondingto thecontrastsetting

OSD Menu

31

Sub Menu Setting Options (Bold: factory default)

ColorRange Automatic Full SDIFull(4-1019) Limited

Setsthequantizationrange.

[Automatic]:Setstherangebasedonsignalinformationautomatically.

Settingisdisabledwhen[ACESproxy(ver.1.0.1)]isselectedfor[PictureMode]. Operationswhen[Automatic]isselectedaredescribedbelow. - ItissetinaccordancewiththesettingsifColorRangesettingsareincludedin

thecamerametadata.Whenthereis[FullRange]metadatainPayloadwhen

SDIisselected,itwillbesetto[SDIFull].

- WhenHDMIisselected,[Full]or[Limited]([Full(0-1023)]or[Limited1(64-940)])

issetautomaticallydependingonHDMIsignalinformation.

- WhenSDIisselected,thesettingisconfiguredaccordingtothesettingsfor

[PictureMode],[ColorGamut],and[Gamma/EOTF]( 41).

Operationswhen[Format]issetto[ICtCp]aredescribedbelow. - When[ColorRange]issettootherthan[Full],[WaveFormMonitor]willdisplay

onlyasignalsetwith[ColorRange].

- If[ChannelSettings] [PictureMode] [Type]is[L/R],therightscreen's[Color

Range]settingforthefollowingwillbethesameassetfortheleftscreen:

-Whendisplayingasingleterminalsinputinfull-screen

-Whendisplaying[2SampleInterleave]or[DualLink3G-SDI]signals

When[ColorRange] [Compatible]( 89) Automatic Full(0-1023) SDIFull(4-1019) Limited1(64-940) Limited2(64-1023)

InputTransform Automatic Off

When[PictureMode] [ACESproxy(ver.1.0.1)] SetswhethertoapplyACESInputTransformtothe[3G-SDIRAW]signal ( 48).

[Automatic]:Appliedautomatically. [Off]:Notapplied.

OutputTransform ITU-RBT.709 ITU-RBT.2020 DCI-P3

When[PictureMode] [ACESproxy(ver.1.0.1)]

[ITU-RBT.709],[ITU-RBT.2020],[DCI-P3]:ACESproxyisconvertedinto respectivemode.

OutputTransformSurround DimSurround DarkSurround

When[PictureMode] [ACESproxy(ver.1.0.1)]

[DimSurround]:EnablesDimSurroundprocessspecifiedbyACESproxy. [DarkSurround]:EnablesDarkSurroundprocessspecifiedbyACESproxy.

OSD Menu

32

Sub Menu Setting Options (Bold: factory default)

CDL/UserLUT ConfiguressettingsforCDLorUserLUT.

CDL/UserLUT CDL1toCDL8 UserLUT1toUser LUT8

Off

Onlywhen[Picture Mode]is[User1-7] ARRI(Rec2100-PQ- 1K-100)

ARRI(Rec2100-HLG- 1K-200)

VARICAM(V-Logto V-709)

RED(Log3G10to 709/1886)

RED(Log3G10to 2020/PQ)

2020PQto2020SDR 2020PQto709SDR 2020HLGto709HLG 2020HLGto709SDR

SelectapresetsuchasCDLorexternalLUT.

When[ARRI(Rec2100-PQ-1K-100)]or[RED(Log3G10to2020/PQ)]isselected, [HDRRange] [SMPTEST2084(PQ)]settingislessthan1000,thesetting becomes[1000].

When[ARRI(Rec2100-HLG-1K-200)]isselected,[HDRRange] [HybridLog- Gamma]settingsbecome[1000].

[ColorGamut]and[Gamma/EOTF]aresetinaccordancewiththe[UserLUT] settings( 41).

lWhen[CDL1-8]isselected

Power 0.50to4.00(1.00) AdjuststheGammaoftheimage.(0.01increments)

Saturation 0.000to2.000(1.000) Adjuststhecolorsaturationoftheimage.(0.001increments)

Offset -1.000to1.000(0.000) Adjuststheblackleveloftheimage.(0.001increments)

Slope 0.000to2.000(1.000) Adjuststhewhiteleveloftheimage.(0.001increments)

Bypass On,Off Whensetto[On],youcantemporarilydisabletheCDLadjustmentresult andreturntopreviouslysetimagequality.

Parametersarestoreduntilthevideodisplayisturnedoff. Bypassissetto[Off]inthefollowingcases: - [PictureMode]hasbeenchanged

- Whenthe[CDL/UserLUT]settinghasbeenchanged

- [PictureFunctionSettings] [CompareView] [Enable]settingshavebeen

changed

When[PictureFunctionSettings] [CompareView] [Enable] [On],thisitem isfixedto[Off].

OSD Menu

33

Sub Menu Setting Options (Bold: factory default)

DetailSettings

CDLExport ExportsCDLparameters.

CDLPreset CDL1toCDL15 All

CDL1toCDL8 All

FileType CCC CDL

Execute

CDLImport ImportsCDLparameters.

Filename

CDLPreset CDL1toCDL8

Execute

CDLPresetName Youcanchangethenameof[CDL1-8]within16charactersincluding alphabeticalcharacters,numbers,andsymbols.

AnchorCDL Youcantemporarilysaveparametersfor[Power],[Saturation],[Offset], and[Slope]andrecoverthevalues.(anchorpointsetting)

ResetCDL ResetsCDLparameters.

lWhen[UserLUT1-8]isselected Selectapresetofthe1D-LUT/3D-LUT.

1D-LUT

SelectstheUserLUT(1D-LUT)toapplyandimportsanexternalLUT(1D-LUT).

Cannotbesetwhen[SystemSettings] [CompatibleSettings] [UserLUT] anoptionotherthan[Normal].

1D-LUT 1D-LUT1to1D-LUT8 Off

Selectthe1D-LUT(preset)savedinoneof[UserLUT1-8].

LUTImport Sameas[DetailSettings] [LUTImport],[LUTName],[LUTDelete] ( 35)

Cannotbesetwhen[1D-LUT] [Off].

LUTName

LUTDelete

3D-LUT SelectstheUserLUT(3D-LUT)toapplyandimportsanexternalLUT(3D-LUT).

3D-LUT 3D-LUT1to3D-LUT8 Off

Selectthe3D-LUT(preset)savedinoneof[UserLUT1-8].

LUTImport Sameas[DetailSettings] [LUTImport],[LUTName],[LUTDelete] ( 35)

Cannotbesetwhen[3D-LUT] [Off].

LUTName

LUTDelete

OSD Menu

34

Sub Menu Setting Options (Bold: factory default)

ColorRange

Automatic,Manual Setsthemethodofcolorrangeconversionperformedbeforeandafter UserLUTprocessing(input/output).

[Automatic]:Thecolorrangeisautomaticallyconvertedbeforeandafter UserLUTprocessing(input/output). When[ColorRange] [Limited]( 31)*:[Input]issetto[Limitedto Full].[Output]issetto[FulltoLimited]. When[ColorRange] [Full]( 31)**:[Input]and[Output]aresetto [Off].

[Manual]:Sets[Input]or[Output].

*[Limited1(64-940)]or[Limited2(64-1023)]isincluded.

**[Full(0-1023)]or[SDIFull(4-1019)]isincluded.

Input LimitedtoFull,Off When[ColorRange] [Manual] SetsthemethodofrangeconversionperformedbeforeUserLUT processing.

[LimitedtoFull]:Performstheprocessforconvertingto[Full]. [Off]:Thecolorrangeisnotconverted.

Output FulltoLimited,Off When[ColorRange] [Manual] SetsthemethodofrangeconversionperformedafterUserLUT processing.

[FulltoLimited]:Performstheprocessforconvertingto[Limited]. [Off]:Thecolorrangeisnotconverted.

Bypass On,Off Whensetto[On],youcanreturntotheimagequalitybeforeUserLUT wasapplied.

When[PictureFunctionSettings] [CompareView] [Enable] [On],thisitem isfixedto[Off].

Parametersarestoreduntilthevideodisplayisturnedoff. Bypassissetto[Off]inthefollowingcases: - [PictureMode]hasbeenchanged

- Whenthe[CDL/UserLUT]settinghasbeenchanged

- [PictureFunctionSettings] [CompareView] [Enable]settingshavebeen

changed

UserLUTPresetName Youcanchangethenameof[UserLUT1-8]within24charactersincluding one-bytealphabeticalcharacters,numbers,andsymbols.

DetailSettings SetsdetailsforPictureMode.

PeakLuminanceControl

On,Off Controlsthedisplayluminanceaccordingtothebrightnessoftheinput image.

Whenthisissetto[On],theFbuttonassignedwiththe[PeakLuminanceControl] functionflasheswhendisplayluminanceisrestricted.

ItisnotpossibletosetthefunctionafterselectingPictureModewhentheright screenisselected.Therightscreen'ssettingwillbethesameassetfortheleft screen.

OSD Menu

35

Sub Menu Setting Options (Bold: factory default)

BoostContrast

On,Off Youcanincreasethebrightness.Theupperlimitfor[Contrast]andthe [BacklightControl]settingsvarydependingonthe[BoostContrast] settings.

[On]:Thesettingsfor[Contrast]arefrom0to10000. When[BacklightControl]is[LocalDimmingHigh/Low]and[Boost Contrast]issetto[On],itturnsto[GlobalDimming].

[Off]:Thesettingsfor[Contrast]arefrom0to6000.

ItisnotpossibletosetthefunctionafterselectingPictureModewhentheright screenisselected.Therightscreen'ssettingwillbethesameassetfortheleft screen.

When[BacklightControl]settingsarechangedwhile[BoostContrast]is[On],the settingsfor[BacklightControl]when[BoostContrast]is[Off]arealsochanged.

BoostContrast

On,Off Youcanincreasethebrightness.Theupperlimitfor[Contrast]settings varydependingonthe[BoostContrast]settings.

[On]:Thesettingsfor[Contrast]arefrom1500to4000. [Off]:Thesettingsfor[Contrast]arefrom0to1500.

ItisnotpossibletosetthefunctionafterselectingPictureModewhentheright screenisselected.Therightscreen'ssettingwillbethesameassetfortheleft screen.

When[Off]isselected,[HDR/SDRView]alsobecomes[Off].

BoostContrast

On,Off Youcanincreasethebrightness(WhenACpowerisused).Theupperlimit for[Contrast]andthe[BacklightControl]settingsvarydependingonthe [BoostContrast]settings.

[On]:Thesettingsfor[Contrast]arefrom0to10000. When[BacklightControl]is[LocalDimmingHigh/Low]and[Boost Contrast]issetto[On],itturnsto[GlobalDimming].

[Off]:Thesettingsfor[Contrast]arefrom0to6000.

ItisnotpossibletosetthefunctionafterselectingPictureModewhentheright screenisselected.Therightscreen'ssettingwillbethesameassetfortheleft screen.

When[BacklightControl]settingsarechangedwhile[BoostContrast]is[On],the settingsfor[BacklightControl]when[BoostContrast]is[Off]arealsochanged.

LUTImport YoucanimportLUT.Filenamesthatcanbeimportedcanbeupto48one-bytecharacters,including alphabeticalcharacters,numbers,andsymbols(includingfileextensions).( 11)

Filename Selectafilename.

LUTType 1D-LUT* 3D-LUT GammaLUT GamutLUT

SelecttheLUTtype.

* only

SelectLUT 1D-LUT1-8* 3D-LUT1-8 GammaLUT1-8 GamutLUT1-8

* only

OSD Menu

36

Sub Menu Setting Options (Bold: factory default)

BaseColorGamut SMPTE-C EBU ITU-R BT.709 AdobeRGB DCI-P3 Native

When[LUTType] [GamutLUT] SelectsthecolorgamutusedwhencreatingtheLUT.

Execute Performsimport.

LUTName YoucanspecifythenameofLUTwithinone-byte24charactersincludingalphabeticalcharacters, numbers,andsymbols.

LUTType Sameas[LUTImport]

SelectLUT

InputName InputtheLUTname.

LUTDelete DeletesimportedLUT.

LUTType Sameas[LUTImport]

SelectLUT

Delete DeletesLUT.

YCbCrColorMatrix Automatic ITU-RBT.709 ITU-RBT.2020

SetsthematrixconversionmethodforinputsignalsinYCbCrformat.

[Automatic]:MatrixcoefficientissetinconformancewiththeITU-R BT.2020standardwhenthe[PictureMode]or[ColorGamut]settingis [ITU-RBT.2020]andinconformancewiththeITU-RBT.709standard otherwise.

[ITU-RBT.709]:MatrixcoefficientissetinconformancewiththeITU-R BT.709standard.

[ITU-RBT.2020]:MatrixcoefficientissetinconformancewiththeITU-R BT.2020standard.

2020Constant Luminance

ConstantLuminance Non-constant

Luminance

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] Setsthecolormatrixconversionmethod.

[ConstantLuminance]:YUVsignalsarelinearlyconvertedandthen convertedintoRGBsignals.

[Non-constantLuminance]:YUVsignalsareconvertedintoRGBsignals withoutchanginggamma0.45.

When[ChannelSettings] [InputConfiguration] [HD/SD-SDI],thesettingis fixedto[Non-constantLuminance].

If[ChannelSettings] [PictureMode] [Type]is[L/R],[2020Constant Luminance]isfixedat[Non-constantLuminance]forthefollowing.However,if [ColorGamut]fortheleftandrightscreensis[ITU-RBT.2020],thentheright screen'ssettingwillbethesameassetfortheleftscreen. - Whendisplayingasingleterminalsinputinfull-screen

- Whendisplaying[2SampleInterleave]or[DualLink3G-SDI]signals

OSD Menu

37

Sub Menu Setting Options (Bold: factory default)

2020GamutMapping GamutMapping Clipping

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] [GamutMapping]:Mappingisperformedoncolorsoutsidethenative

colorgamutbyCanon'suniquemethod. [Clipping]:Colorsoutsidethenativecolorgamutareclippedbyageneral

method.

HLGSystemGamma Automatic Manual

WhenManualis selected

[Gamma/EOTF] When[HybridLog- Gamma] 1.000to1.500(1.200) When[HybridLog- GammaRGB] 1.2 - 1000 cd/m2

1.2-2000cd/m2

When[Gamma/EOTF] [HybridLog-Gamma]or[HybridLog-Gamma RGB] Setsthesystemgammaorpeakluminance.

[Automatic]:When[HybridLog-Gamma]isselected,itadjuststhesystem gammaautomaticallytomatchthecontrastvalueandHDRrange.It cannotbesetwhen[HybridLog-GammaRGB]isselected.

[Manual]:Operationswhen[HybridLog-Gamma]or[HybridLog-Gamma RGB]isselectedareasfollows: [HybridLog-Gamma]:Adjuststhesystemgamma.(Incrementsof 0.005) [HybridLog-GammaRGB]:Setsthepeakluminance.Themaximum valueforeachsettingbecomestheupperlimitvalueof[HDRRange].

HDR/SDRView On,Off TheHDR(HighDynamicRange)andSDR(StandardDynamicRange) displayscanbecompared.

[On]:TherightscreenisdisplayedatSDRluminance. [Off]:DoesnotcomparetheHDRandSDRdisplay.

Cannotbesetwhen[PictureMode]isselectedintherightscreen. Whenthe[Contrast]settingfortheleftscreenisspecifiedas[1000]orless,the luminanceoftheleftandrightscreensisthesame.

Calibration

When[PictureMode] [User17] Executescalibrationbasedonsettargetvalues.

CalibrationcannotbeexecutedwhenusingDCpower.

When[Luminance]issettohighbrightness,itmaybecalibratedbeyondthebrightnessadjustmentrangeand setlowerthanthetargetvalue,dependingonthe[ColorTemperature]setting.Inthatcase,setthe[Luminance] again.

Calibrationcannotbeexecutedin[PictureMode]fortherightscreen.

Luminance Setsthetargetluminance.

48to500(100)cd/m2

48to600(100)cd/m2

48to150(100)cd/m2

48to300(100)cd/m2

48to600(100)cd/m2

OSD Menu

38

Sub Menu Setting Options (Bold: factory default)

ColorTemperature D93,D65,D61,D60, D56,D50,DCI-P3 Custom(xy)

WhenCustom(xy)is selected

x:0.260to0.360 (0.313) y:0.260to0.360 (0.329)

Setsthetargetcolortemperature.

[D93],[D65],[D61],[D60],[D56],[D50],[DCI-P3]:Selectfrompresetcolor temperatures.

[Custom(xy)]:AdjustsCIExandy.(Incrementsof0.001)

ColorGamut SMPTE-C EBU ITU-R BT.709 ITU-RBT.2020 AdobeRGB DCI-P3

Setsthecolorgamut.

Gamma 2.2,2.35,2.4,2.6, ITU-RBT.1886

Setsthetargetgamma.

Start Performscalibration.

HDMILink When[PictureMode] [User17] Video isdisplayedat the imagequality linked to thevideo imagequalitysettingusing theHDMI metadata.

ParameterofHDMImetadataandVideoDisplay( 42)

Cannotset[HDMILink]when[ChannelSettings] [PictureMode] [Type]is[L/R].

AutomaticAdjustment On,Off

ColorGamut/Gamma/ EOTF

On,Off Matchesthe[ColorGamut]and[Gamma/EOTF]settingsofthevideo displaywiththeHDMImetadata.

Contrast/HDRRange On,Off Matchesthe[Contrast],[HDRRange]and[BoostContrast]*settingofthe videodisplaywiththeHDMImetadata. * only

BacklightControl

Peak luminance priority Averageluminance priority Off

MatchesthebrightnesssettingofthevideodisplaywiththeHDMI metadata.

[Peakluminancepriority]:Operatesif[PeakLuminanceControl]is[On] evenwhentheaverageluminanceofHDMImetadataishigh.

[Averageluminancepriority]:Operatesif[PeakLuminanceControl]is[Off] whentheaverageluminanceofHDMImetadataishigh.

CopyPictureMode When[PictureMode] [User17] CopythePictureModesettings.

In[PictureMode]otherthan[User17],theresultsofcalibrationperformedatthefactoryarecopied.

OSD Menu

39

Sub Menu Setting Options (Bold: factory default)

PictureMode(Copy from)

SMPTE-C EBU ITU-R BT.709 ITU-RBT.2020 AdobeRGB DCI-P3 User1(2020PQ) User2(2020HLG) User3(DCIPQ) User4(DCIPQD65) User5~User7

Select"PictureMode(Copyfrom)".

[User17]:Selectfromotherthanthecurrentlysetmode.

Execute Performscopy.

PictureModeName Youcanchangethenameof[User17]within24charactersincluding alphabeticalcharacters,numbers,andsymbols.

AnchorAdjustment OK Cancel

Temporarilysavesparametersforadjusting[Contrast],[Brightness], [Chroma],[Sharpness],and[HDRRange]andrecoverthevalues(anchor pointsetting).

[OK]:Performsanchorpointsetting. [Cancel]:Returnstothepreviousscreenwithoutsettinganchorpoint.

Reset OK Cancel

Return[PictureMode]tofactorydefault.Notethatin[User17]mode whereyouareperformingcalibration,thesettingreturnstothevalueafter calibrationinsteadofthefactorydefault. Whenselected,themessage[ResetAdjustmentsettingstodefaults?] appears.

[OK]:Performsreset. [Cancel]:Returnstothepreviousscreenwithoutresetting.

OSD Menu

40

Relationship between [Color Gamut] and [Gamma/EOTF] that can be selected When[ColorGamut]ischanged,[Gamma/EOTF]ischangedtotheunderlinedvalue(defaultvalue)whenthecurrent[Gamma/EOTF]settings

arenotselectable.

PictureMode ColorGamut SelectableGamma/EOTF

SMPTE-C Cannotbeselected Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),GammaLUT1toGammaLUT8

EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),GammaLUT1toGammaLUT8

ITU-RBT.709,

ITU-RBT.2020

Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

HybridLog-GammaRGB,CanonLog,CanonLog(HDR),CanonLog2,

CanonLog2(HDR),CanonLog3,CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR),

GammaLUT1toGammaLUT8

AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8

DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),

S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8

CINEMAEOS

SYSTEM,

User1-7

SMPTE-C Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),GammaLUT1toGammaLUT8

EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),GammaLUT1toGammaLUT8

ITU-RBT.709,

ITU-RBT.2020

Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

HybridLog-GammaRGB,CanonLog,CanonLog(HDR),CanonLog2,

CanonLog2(HDR),CanonLog3,CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR),

GammaLUT1toGammaLUT8

AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8

DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),

S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8

Native Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),GammaLUT1to

GammaLUT8

CinemaGamutto709,

CinemaGamutto2020

2.2,CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,

CanonLog3(HDR)

CinemaGamuttoDCI CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,Canon

Log3(HDR)

DCI-P3+to709,

DCI-P3+toDCI

CanonLog,CanonLog(HDR)

S-Gamut3to709

S-Gamut3to2020

S-Gamut3.Cineto709

S-Gamut3.Cineto2020

Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

HybridLog-GammaRGB,S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT

8

S-Gamut3toDCI

S-Gamut3.CinetoDCI

Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),S-Log2(HDR),

S-Log3(HDR),GammaLUT1toGammaLUT8

GamutLUT1to

GamutLUT8

Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8

OSD Menu

41

Operations when [Color Range] [Automatic] (when SDI is selected)

SettingOptions ColorRangetobeSet

PictureMode DCI-P3

Full

ColorGamut

DCI-P3

CinemaGamuttoDCI

DCI-P3+toDCI

Gamma/EOTF

CanonLog(HDR)

CanonLog2(HDR)

CanonLog3(HDR)

S-Log2(HDR)

S-Log3(HDR)

Otherthantheabove Limited

SettingOptions

ColorRangetobeSet

[SystemSettings] [CompatibleSettings] [ColorRange]

When[Normal] When[Compatible]

PictureMode DCI-P3

Full Full(0-1023)

ColorGamut

DCI-P3

CinemaGamuttoDCI

DCI-P3+toDCI

Gamma/EOTF

CanonLog(HDR)

CanonLog2(HDR)

CanonLog3(HDR)

S-Log2(HDR)

S-Log3(HDR)

CanonLog

Limited Limited2(64-1023)CanonLog2

CanonLog3

Otherthantheabove Limited1(64-940)

Parameter of [User LUT] and [Color Gamut] / [Gamma/EOTF]

UserLUT ColorGamut Gamma/EOTF

ARRI(Rec2100-PQ-1K-100) ITU-RBT.2020 SMPTEST2084(PQ)

ARRI(Rec2100-HLG-1K-200) ITU-RBT.2020 HybridLog-Gamma

VARICAM(V-LogtoV-709) ITU-RBT.709 2.2

RED(Log3G10to709/1886) ITU-RBT.709 ITU-RBT.1886

RED(Log3G10to2020/PQ) ITU-RBT.2020 SMPTEST2084(PQ)

2020PQto2020SDR ITU-RBT.2020 2.4

2020PQto709SDR ITU-RBT.709

2020HLGto709HLG ITU-RBT.709 (Userselectable)

2020HLGto709SDR ITU-RBT.709 2.4

OSD Menu

42

Parameter of HDMI metadata and Video Display

HDMImetadata Videodisplaysetting

ColorGamut BT.709 ITU-RBT.709

BT.2020 ITU-RBT.2020

Gamma/EOTF

TraditionalSDR 2.2

PQ PQ

HybridLog-Gamma HybridLog-Gamma

OSD Menu

43

Details of the factory default settings for each [Picture Mode]

Item SMPTE-C EBU ITU-R BT.709

ITU-R BT.2020

Adobe RGB

DCI-P3

Contrast 1000 1000 1000 1000 1000 480

Brightness 0 0 0 0 0 0

Chroma 1000 1000 1000 1000 1000 1000

Sharpness 0 0 0 0 0 0

BacklightControl LocalDimming Low

LocalDimming Low

LocalDimming Low

LocalDimming Low

LocalDimming Low

LocalDimming Low

LocalDimming High

LocalDimming High

LocalDimming High

LocalDimming High

LocalDimming High

LocalDimming High

Color Temperature

Preset D65 D65 D65 D65 D65 DCI-P3

x 0.313 0.313 0.313 0.313 0.313 0.314

y 0.329 0.329 0.329 0.329 0.329 0.351

GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)

BiasR/G/B 0 0 0 0 0 0

ColorGamut SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3

Gamma/EOTF 2.2 2.35 2.2 2.2 2.2 2.6

ColorRange Automatic Automatic Automatic Automatic Automatic Automatic

InputTransform

OutputTransform

OutputTransform Surround

CDL/UserLUT Off Off Off Off Off Off

PeakLuminanceControl

Off Off Off Off Off Off

BoostContrast

Off Off Off Off Off Off

YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic Automatic

2020ConstantLuminance Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

2020GamutMapping Clipping Clipping Clipping Clipping Clipping Clipping

HLGSystemGamma Manual(when[HybridLog- Gamma]:1.200;

when[HybridLog-Gamma RGB]:1.2-1000cd/m2)

HDR/SDRView Off Off Off Off Off Off

HDMILink Off Off Off Off Off Off

PictureModeName

OSD Menu

44

Item User 1 User 2 User 3 User 4 User 5 to

User 7

Contrast

20000 10000 20000 20000 1000

10000 10000 10000 10000 1000

6000 6000 6000 6000 1000

4000 4000 4000 4000 1000

3000 3000 3000 3000 1000

Brightness 0 0 0 0 0

Chroma 1000 1000 1000 1000 1000

Sharpness 0 0 0 0 0

Backlight Control

Local Dimming Automatic

Local Dimming Automatic

Local Dimming Automatic

Local Dimming Automatic

Local Dimming Low

Local Dimming Low

Local Dimming Low

Local Dimming Low

Local Dimming Low

Local Dimming Low

Local Dimming High

Local Dimming High

Local Dimming High

Local Dimming High

Local Dimming Low

Local Dimming High

Local Dimming High

Local Dimming High

Local Dimming High

Local Dimming High

Global Dimming

Global Dimming

Global Dimming

Global Dimming

Local Dimming Low

Color Temperature

Preset D65 D65 DCI-P3 D65 D65

x 0.313 0.313 0.314 0.313 0.313

y 0.329 0.329 0.351 0.329 0.329

Gain R/G/B 1023/1023/1023 (When [D65 Custom]: 1000/1023/1023)

Bias R/G/B 0 0 0 0 0

Color Gamut ITU-R BT.2020 ITU-R BT.2020 DCI-P3 DCI-P3 ITU-R BT.709

Gamma/EOTF SMPTE ST 2084 (PQ)

Hybrid Log- Gamma

SMPTE ST 2084 (PQ)

SMPTE ST 2084 (PQ)

2.2

Color Range Automatic Automatic Automatic Automatic Automatic

Input Transform

Output Transform

Output Transform Surround

CDL/User LUT Off Off Off Off Off

Peak Luminance Control

On On On On Off

OSD Menu

45

Item User 1 User 2 User 3 User 4 User 5 to

User 7

BoostContrast

Off Off Off Off Off

On On On On Off

YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic

2020ConstantLuminance Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

2020GamutMapping Clipping Clipping Clipping Clipping Clipping

HLGSystemGamma Manual(when[HybridLog-Gamma]:1.200; when[HybridLog-GammaRGB]:1.2-1000cd/m2)

HDR/SDRView On On On Off Off

HDMILink Off Off Off Off Off

PictureModeName User1 (2020PQ)

User2 (2020HLG)

User3 (DCIPQ)

User4 (DCIPQD65)

User5to User7

OSD Menu

46

Item CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)

Contrast

20000 480

10000 480

6000 480

4000 480

3000 480

Brightness 0 0

Chroma 1000 1000

Sharpness 0 0

Backlight Control

Local Dimming Automatic Local Dimming Low

Local Dimming Low Local Dimming Low

Local Dimming High Local Dimming Low

Local Dimming High Local Dimming High

Global Dimming Local Dimming Low

Color Temperature

Preset D65 D60

x 0.313 0.322

y 0.329 0.338

Gain R/G/B 1023/1023/1023 (When [D65 Custom]: 1000/1023/1023)

Bias R/G/B 0 0

Color Gamut ITU-R BT.2020

Gamma/EOTF Canon Log 2 (HDR)

Color Range Automatic

Input Transform Automatic

Output Transform DCI-P3

Output Transform Surround

Dark Surround

CDL/User LUT Off Off

Peak Luminance Control

On Off

Boost Contrast

Off Off

On Off

YCbCr Color Matrix Automatic Automatic

2020 Constant Luminance Non-constant Luminance Non-constant Luminance

2020 Gamut Mapping Clipping Clipping

OSD Menu

47

Item CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)

HLGSystemGamma Manual(when[HybridLog- Gamma]:1.200;

when[HybridLog-GammaRGB]: 1.2-1000cd/m2)

HDR/SDRView Off Off

HDMILink Off Off

PictureModeName

OSD Menu

48

Channel Settings Thismenuisusedforinputrelatedsettings.Selectthe[SelectChannel]andchooseachannelnumberfromCH1to CH20.Finallydefinetheparameterofeachofthe[ChannelSettings]. "SupportedSignalFormat"( 95)

Sub Menu Setting Options

SelectChannel CH1toCH20 Displaythechannelnumber.Inaddition,youcanassigneachcontentof [ChannelSettings]toeachchannel( 16).

Itmaytake5secondswhenswitchingchannels.

CH1toCH30

InputConfiguration Selecttheinput.Factorydefaultdependonthechannel( 17).

12-3G/HD-SDI

3G/HD-SDI

6G/3G/HD-SDI

3G-SDIRAW HD/SD-SDI HDMI (Notset)

SelectInputSignal Automatic QuadInput DualInputA,B DualInputC,D SingleInputA SingleInputB SingleInputC SingleInputD

Setsthesignaldisplaymethod.

[Automatic]:Thedisplaymethodisautomaticallydeterminedtomatchthe inputsignal.

[QuadInput]:Fourinputsignals(InputAtoInputDterminals)are displayed.

[DualInputA,B]:Twoinputsignals(InputAterminalandInputBterminal) aredisplayed.

[DualInputC,D]:Twoinputsignals(InputCterminalandInputDterminal) aredisplayed.

[SingleInputA],[SingleInputB],[SingleInputC],[SingleInputD]:One inputsignal(anyofInputAtoInputD)isdisplayed.

Settingsthatcanbesetdifferaccordingtotheinputsignal. - When[3G-SDIRAW]isset:[QuadInput]cannotbeselected.

- [HD/SD-SDI]:Only[SingleInputA]to[SingleInputD]canbeselected.

- [HDMI]:Thisisfixedto[Automatic].

OSD Menu

49

Sub Menu Setting Options

ImageDivision When[InputConfiguration] [12-3G/HD-SDI]( [3G/HD-SDI], [6G/3G/HD-SDI])

Setsthedisplaymethodwhenusingeither[QuadInput]or[DualInput].Twodivisionmethods "SquareDivision"and"2SampleInterleave"aresupportedfor4Kvideosignals.

Automatic SquareDivision 2SampleInterleave

[SelectInputSignal] When[QuadInput] MultiView(Quad) When[DualInput] DualLink3G-SDI MultiView(Dual)

[Automatic]:Automaticallydeterminedbasedonpayloadanddisplayed. [SquareDivision]:Displaysasignaltransmittedoverfourinputsasasingle

image. [2SampleInterleave]:Displaysasignaltransmitteddividedintoa2K/HD

signalasasingleimage. [MultiView(Quad)]:Eachoftheimagesfromthefourinputsareshownin

fourscreens. [DualLink3G-SDI]:DisplaysaDualLink3G-SDIsignalasasingleimage. [MultiView(Dual)]:Eachoftheimages(InputsA/BorInputsC/D)fromthe

twoinputsareshownintwoscreens.

SelectInputSignal:QuadInput,ImageDivision:SquareDivision

Thecombinationsofvideosignalformatsthatcanbedisplayedwhenusingtwo screensorfourscreensin[MultiView(Quad)]or[MultiView(Dual)]areasfollows: - Resolutioncombinations:Same,or4096x2160,2048x1080,3840x2160,

1920x1080

- WhenusingaframerateandI/P/PsFcombinationthatisoneof

23.98P/24P/25P/29.97P/30P

"I(All)/PsF(All)/47.95P/48P/50P/59.94P/60P"

- (Quadscreendisplayonly)Forbothleftandright,whenthetopandbottom

screenvideosignalframeratesandI/P/PsFarethesame

Theremaybeperiodicaldeteriorationintheimagewheninputtingsignalswith

differingframeratesorI/P/PsF.

Twoorfourscreenscanbedisplayedwith[MultiView (Quad)]or[MultiView(Dual)]selectedonlyifthesameimagesignalformatis used.

Whenusing[MultiView(Quad)]or[MultiView(Dual)]:For 20481080images,theimagesaredisplayedinreducedsizewhen[Screen Scaling]issetto[Automatic].Theleftandrightpartsofthescreenwillbe trimmedfordisplaywhenanythingotherthan[Automatic]isselected.

LinkOrder Automatic Off

Automaticallydetectsanddisplayscorrectterminalorderbasedon payloadwhenusing[2SampleInterleave]or[DualLink3G-SDI].

OSD Menu

50

Sub Menu Setting Options

Format SDISignal Automatic 4:2:2YCbCr10-bit 4:2:2YCbCr12-bit 4:4:4YCbCr10-bit 4:4:4YCbCr12-bit 4:2:2ICtCp10-bit 4:2:2ICtCp12-bit 4:4:4ICtCp10-bit 4:4:4ICtCp12-bit 4:4:4RGB10-bit 4:4:4RGB12-bit 4:4:4XYZ10-bit 4:4:4XYZ12-bit HDMISignal Automatic 4:4:4XYZ12/10-bit

Setsthecolorformatandgradation.

[Automatic]:Setsautomaticallytomatchtheinputsignal.

TheHD-SDIsignaliseither[4:2:2YCbCr10-bit]or[4:2:2ICtCp10-bit]. When[InputConfiguration] [HD/SD-SDI],thesettingisfixedto[4:2:2YCbCr 10-bit].

When[InputConfiguration] [3G-SDIRAW],thesettingisfixedto[Automatic]. If[Automatic]isselected,theyarerenderedinaPayloadthatisselectedinthe orderABCD.

ThesettingsforcorrectlydisplayingICtCpformatsignalsareasfollows. - [PictureMode]:[ITU-RBT.709]or[ITU-RBT.2020]

- [ColorGamut]:[ITU-RBT.709]or[ITU-RBT.2020]

- [Gamma/EOTF]:[SMPTEST2084(PQ)],[HybridLog-Gamma]or[HybridLog-

GammaRGB]

IfyouneedtousetheICtCpformatforSDIsignals,selectanyofthefollowingto matchthesignal:[4:2:2ICtCp10-bit],[4:2:2ICtCp12-bit],[4:4:4ICtCp10-bit], [4:4:4ICtCp12-bit]

Touse4:4:4XYZ10-bitforSDIsignals,select[4:4:4XYZ10-bit].Then,signals willbeprocessedassignalswhereXYZdataisincludedinRGBdataoutputin 4:4:4RGB10-bitformat.

AudioInput [SelectInputSignal] When[QuadInput] Automatic,InputA, InputB,InputC,InputD When[DualInputA,B] Automatic,InputA, InputB When[DualInputC,D] Automatic,InputC, InputD

Setstheaudioterminal.

[Automatic]:Setsautomaticallytomatchtheinputsignal.

For[SelectInputSignal] [Automatic]or[SingleInput],itisfixedat[Automatic].

Marker/TC/CameraInfo Input

[SelectInputSignal] When[Automatic]or [QuadInput] InputA,InputB,InputC, InputD When[DualInputA,B] InputA,InputB When[DualInputC,D] InputC,InputD

Setthetargetterminalsothatvariousmarkers(exceptGridMarker),Time Code,andCameraInformationaredisplayed.(CameraInformationis availableinthe[MultiView(Quad)]displayonly)

Thissettingbecomesinvalidexceptforthe[MultiView(Quad)]or[MultiView(Dual)] display.

OSD Menu

51

Sub Menu Setting Options

InternalSync On,Off When[ImageDivision] [SquareDivision] Setswhethertosynchronizefourinputs.

[On]:Forcesynchronization. [Off]:Donotforcesynchronization.

ChannelName Setsthenameoftheselectedchannel.Youcaninputupto16 alphanumericcharacters.

PictureMode Set[PictureMode]byindividualchannel.

Type Normal L/R 4K/2K Automatic

[Normal]:Setsone[PictureMode]. [L/R]:Sets[PictureMode]byindividualleftandrightscreen.Displaysas

[SingleInputDualView]whenusingresolutionsof2Korlower. [4K/2K]:Sets[PictureMode]byindividual4Kor2Ksignalscreen. [Automatic]:[PictureMode]issetaccordingtotheSDIsignal.Theset

[PictureMode]ischangedtointheordercamerametadata Payloadresolution(4K/2K).

[Type] When[Normal] PictureMode

When[L/R] PictureModeL PictureModeR

When[4K/2K] Resolution4K,2K

When[Automatic] Resolution4K,2K Payload UHD/PQ, UHD/HLG,UHD, 709/PQ, 709/HLG,709, VANC,Unknown Camera CINEMAEOS SYSTEM, ARRI,VARICAM

SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3 User1(2020PQ) User2(2020HLG) User3(DCIPQ) User4(DCIPQD65) User5~User7 CINEMAEOSSYSTEM ACESproxy(ver.1.0.1) (Notset)

Setthe[PictureMode]foreachscreen.

[ACESproxy(ver.1.0.1)]:Canbesetwhen[Type]is[Normal]. [](Notset):Cannotautomaticallychangeimagequalitytosuitinput

signal.Canbesetwhenotherthan[Resolution4K]and[Resolution 2K]areselectedin[Type] [Automatic].

ColorimetryBit/TransferCharacteristicsoftheSDIPayloadIDsupportsthesignal inconformitywiththefollowingstandard.

SMPTEST2082-10:2018(12G-SDI)

SMPTEST2081-10:2018(6G-SDI) SMPTEST425-1:2017(3G-SDISingleLink/SquareDivision)

SMPTEST425-3:2019(3G-SDIDualLink(2SI))

SMPTEST425-5:2019(3G-SDIQuadLink(2SI))

SMPTEST292-1:2018(HD-SDI)

Settingsthatcanbesetdifferaccordingtotheinputsignal. - [InputConfiguration] [HD/SD-SDI]:[Type]isfixedto[Normal].[Automatic]

cannotbeset.

- [InputConfiguration] [3G-SDIRAW]and[HDMI]:[4K/2K]and[Automatic]

cannotbesetin[Type].

When[Type]is[L/R] - Settingthesame[PictureMode]forbothleftandrightscreenswillcause

[PictureMode]inthenon-selectedscreentochangetoadifferentmode(for

example,the[PictureMode]settingsoftheleftandrightscreensareswitched).

- Whenusingasignal2Korunder,itisfixedat[SingleInputDualView].

OSD Menu

52

Sub Menu Setting Options

SingleInputDualView Automatic,Off Whenotherthan[ImageDivision] [MultiView(Quad)]or[MultiView(Dual)] Theimagefromtheinputsignalcanbereducedandshownin dual-screen.

[Automatic]:When[PictureMode] [Type]is[L/R],orwhenthe[Picture FunctionSettings]SubMenuitemsaresetto[On],identicalimages areautomaticallyshownanddual-screencomparisoncanbemade. 4Kimagesareshowninreducedsize. Relevant[PictureFunctionSettings]SubMenuitems: [Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamut View],[Monochrome],[BlueOnly],[RedOff],[GreenOff],[BlueOff], and[CompareView]

Cannotbeusedwhenanunsupportedvideosignalisinput. Cannotbesetwhen[InputConfiguration] [HD/SD-SDI].

Separator White Half Black Off

Inthefollowingcases,screenborderswillbedisplayed. - When[PictureMode] [Type]is[L/R]

- When[MultiView(Quad)]or[MultiView(Dual)]isselected

- When[SingleInputDualView]issetto[Automatic]andtheimagesare shownnexttoeachotherforimagecomparison

- When[PictureFunctionSettings] [CompareView] [Enable]is[On]

OSD Menu

53

Display Settings Thismenuisusedtoconfigurethedisplaymethod.

Sub Menu Setting Options (Bold: factory default)

ScreenScaling NativeInputResolution 200% Automatic

Defineshowthevideoisscaledanddisplayedonthescreen.

[NativeInputResolution]:Displaystheinputsignalwithoutscaling.

1920x1080(original)

[200%]:Doublestheverticalandhorizontaldimensions.

1920x10803840x2160

[Automatic]: Enlargestofullscreen.

1920x10803840x2160

[Automatic]: Fitssizetofillscreen.

1920x10803840x21604096216038402025

Inthefollowingcases,themaximummagnificationis200%evenif[Automatic]is selected. - When[Peaking],[FalseColor],or[RangeCheck] [Enable]issettoanoption

otherthan[Off]

Inthefollowingcases,imagesareshowninreducedsizewhen [Automatic]isselected. - [40962160]:When[ImageDivision] [SquareDivision]isselected

- [20481080]:When[ImageDivision] [MultiView(Quad)]or[MultiView(Dual)]

isselected

OSD Menu

54

Sub Menu Setting Options (Bold: factory default)

Anamorphic x2.0 x1.8 x1.5 x1.33 Off

Setwhencheckingimagesphotographedusingananamorphiclens. Displayedinaccordancewiththesetmagnification.

Settingsareinvalidinthefollowingcases: - When[Peaking],[FalseColor],or[RangeCheck] [Enable]issettoanoption

otherthan[Off]

Aspect(SD-SDI) Automatic 16:9 4:3

SetsthesizefordisplayingSD-SDIsignalimages.

[Automatic]:Automaticallydeterminedbasedonpayload. [16:9]:Imagesaredisplayedwithanaspectratioof16:9. [4:3]:Imagesaredisplayedwithanaspectratioof4:3.

When[Peaking],[FalseColor],or[RangeCheck] [Enable] anoptionother than[Off],thisitemissetto[4:3].

ScalingMethod Shape Trace Bicubic NearestNeighbor

Setstheinterpolationmethodwhen[ScreenScaling]issetto[200%]or [Automatic].

[ShapeTrace]:Canonoriginalprocessingthatproducessmoothslopes withreducedjaggedlines.

[Bicubic]:Generalinterpolationprocessthatusesneighboringpixel informationtocreateinterpolatedpixels.

[NearestNeighbor]:Processthatusesnearestneighborpixelinformation tocreate(copy)newpixels.Thisisusefulasitenlargestheoriginal pixels,thusmakinganyjaggedlinesvisible.

OSD Menu

55

Sub Menu Setting Options (Bold: factory default)

VideoPosition (MultiView)

Top Middle Center

Whenusing[MultiView(Quad)],[MultiView(Dual)],or[SingleInputDual View] Setstheverticaldisplaypositionfortheimage.

[Top]:Displaysatthetopofthescreen. [Middle]:Displaysatthetopmiddleofthescreen. [Center]:Displaysatthemiddleofthescreen.

Zoom Enlargespartofthevideoimage.Thezoomfunctioncanbeusedwhentheresolutionis[4096x2160], [3840x2160],[2048x1080]or[1920x1080].

Thezoomfunctioncannotbeusedinthefollowingcases: - Duringexecutionof[PlaybackFile]under[ScreenCapture]

- Duringdisplayofthetestpattern

- When[MultiView(Quad)]or[MultiView(Dual)]isselected

- When[ChannelSettings] [InputConfiguration]issetto[HD/SD-SDI]

- When[ChannelSettings] [PictureMode] [Type]issetto[L/R]

- When[PictureFunctionSettings] [CompareView] [Enable]issetto[On]

Whilethezoomfunctionisinuse,thefollowingarenotdisplayed: Variousmarkers,BackgroundColor( )

Whenzoomsettingsarechanged,[FrameHold]turns[Off].

ZoomPreset Zoom1 Zoom2 Zoom3 Off

Setsthezoomdisplaymethod.Therearethreepresets.

Magnification x2 x4 x8

Setsthedisplayscaleofzoom.

Position Thezoomadjustmentscreenisdisplayed.Usethejogdialtoadjustthe displayposition.

Type Normal SingleInputDualView

Setstheenlargedimagedisplaymethod.

[Normal]:Onlydisplaystheenlargedimage. [SingleInputDualView]:Displaystheoverallimageontheleftandthe

enlargedimageontheright.

When[Normal]isselected:When theresolutionis[2048x1080]or[1920x1080],thedisplaypositioncannotbe changedevenif[Magnification]issetto[x2].

When[Normal]isselected:Whentheresolutionis[1920x1080], thedisplaypositioncannotbechangedevenif[Magnification]issetto[x2].

When[SingleInputDualView]isselected:For4Kvideo(3840x2160or 4096x2160),thequalityoftheenlargedimagewillbedegradedcomparedto [Normal].

FrameHold On,Off Pausesthevideo.

Cannotbesetwhen[Peaking] [Enable]issettoanoptionotherthan[Off]. Iftheimagequalitysettingischangedwhilethevideoispaused,thesettingmay notchangecorrectly.

OSD Menu

56

Sub Menu Setting Options (Bold: factory default)

BackgroundColor

White Gray Off

Setsthecoloroftheblackbandtochecktheboundaryoftheblackband andvideoimage.

Settingisdisabledwhen[MultiView(Quad)]or[MultiView(Dual)]isselected.

I/PsF Automatic Interlace PsF

DefineshowtheinterlacesignalorPsFsignalisdisplayed.

[Automatic]:Automaticallydeterminedbasedonpayloadanddisplayed.If thereisnopayload,thesignalisdisplayedasaninterlacesignal.

[Interlace]:Displayedasaninterlacesignal. [PsF]:DisplayedasaPsFsignal.

PsF Progressive Interlace

DefineshowthePsFsignalisdisplayed.

[Progressive]:Interpolatesgivingpreferencetoimagequalitybydetecting pairedfields.

[Interlace]:Interpolatesusingtwoadjacentfieldsgivingprioritytospeed.

I/PConversion Image Priority SpeedPriority

SetstheinterlacedsignalI/Pconversionmethod.

[ImagePriority]:Thismodegivesprioritytoimagequality.Processingtime willbelongerthan[SpeedPriority].

[SpeedPriority]:Thismodegivesprioritytospeed.

FilmCadence 2-2 2-3 2-3-3-2 Off

Setsthefilmcadencemode.

[2-2]:Displaysprogressiveimageafterconversionfor2-2pulldown processedinterlacedsignalinput.

[2-3]:Displaysprogressiveimageafterconversionfor2-3pulldown processedinterlacedsignalinput.

[2-3-3-2]:Displaysprogressiveimageafterconversionfor2-3-3-2 pulldownprocessedinterlacedsignalinput.

[Off]:Doesnotperformfilmcadencemodeprogressiveconversion.

Thiscanbesetonlywhen[I/PConversion]issetto[ImagePriority]. Cannotbesetinthe[MultiView(Quad)]or[MultiView(Dual)]display.Thesetting isfixedto[Off].

OSD Menu

57

Audio Settings Thismenuisusedtosetaudiooutputfromtheheadphoneterminal.

Sub Menu Setting Options (Bold: factory default)

SDIGroup CH1-CH8 CH9-CH16

SwitchestheaudiogrouptobeinputduringSDIaudioinput.

CHL(SDI) [SDIGroup] When[CH1-CH8] CH1toCH8(CH1) When[CH9-CH16] CH9toCH16(CH9)

Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphone respectively.Theoptionsdifferaccordingtothe[SDIGroup]setting.

CHR(SDI) [SDIGroup] When[CH1-CH8] CH1toCH8(CH2) When[CH9-CH16] CH9toCH16(CH10)

CHL(HDMI) CH1toCH8(CH1) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphone respectively.

CHR(HDMI) CH1toCH8(CH2)

Volume 0to100(30) Setsthevolume.(Incrementsof1)

AudioSwitch L R L R MIX(L+R)

Setsthestereooutput.

OSD Menu

58

Marker Settings Thismenuisusedtoconfigurevariousmarkers.Thefactorydefaultsdifferaccordingtothe[MarkerPreset]setting ( 63).

Sub Menu Setting Options (Factory default)

MarkerPreset Marker 1to5 Off

Customizesmarkerswhichareassignedtomarkers1to5.

AspectMarker1 [AspectMarker]displaysarangeinaccordancewiththespecifiedaspectratio.

Enable On,Off SwitchestheaspectmarkerOn,Off.

Mask Black Half Off

Switchesthemaskcolor.Maskistheblankingareaoutsidetherangeof themarker.

[Black]:

[Half](50%gray):

[Off]:Turnsmaskoff.

AspectRatio 16:9,15:9,14:9,13:9, 4:3,2.39:1,2.35:1, 1.896:1,1.85:1,1.66:1, Variable

WhenVariableis selected

1.00:1to3.00:1

Setstheaspectratiooftheaspectmarker. Theaspectratiocanbeenteredasanumericvaluewhenyouselect [Variable](0.01:1increments).Thegrayedoutsliderbecomesactiveand canbeusedtosettheaspectratio.

Line On,Off When[Mask] [Black]or[Half] SwitcheslinesonmaskOn,Off.

LineWidth Thick Normal Thin

Setsthethicknessoftheaspectmarkerline.

OSD Menu

59

Sub Menu Setting Options (Factory default)

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecoloroftheaspectmarkerline.

LineBrightness High,Low,Half Setsthebrightnessoftheaspectmarkerline.

HPosition -65to65 Changeshorizontalpositionwithoutchangingtheaspect.

VPosition -35to35 Changesverticalpositionwithoutchangingtheaspect.

SafetyZoneMarker1,21 Therearetwotypesof[SafetyZoneMarker]:1and2,whichsharethesamesettings.Asafetyzone markerisusedtosetthesafezoneoftheimage(actualdisplayedarea)tochecktheimage.

Enable On,Off SwitchesthesafetyzonemarkerOn,Off.

AspectRatio 16:9,15:9,14:9,13:9, 4:3,2.39:1,2.35:1, 1.896:1,1.85:1,1.66:1, Variable

WhenVariableis selected

1.00:1to3.00:1

Setstheaspectratioofthesafetyzonemarker.

[Variable]:Theaspectratiocanbeenteredasanumericvalue(0.01:1 increments).Thegrayedoutsliderbecomesactiveandcanbeused tosettheaspectratio.

When[AreaSize]issetto[Variable(dot)],youcannotselect[AspectRatio].

AreaSize 80%,85%,88%,90%, 93%,95%,Variable(%), Variable(dot)

Setsthesafetyzonemarkerareasize.

[Variable(%)]:Thegrayedout[Rate(%)]becomesactive. [Variable(dot)]:Thegrayedout[Width(dot)]and[Height(dot)]become

active.

Rate(%) 50to100 When[AreaSize] [Variable(%)] Movetheslidertosetthedisplayedmarkerareasizewithoutchangingthe aspectratioin1%increments.

Width(dot) 20to4096 When[AreaSize] [Variable(dot)] Movetheslidertosettheareawidthin2dotincrement. 20to3840

Height(dot) 20to2160 When[AreaSize] [Variable(dot)] Movetheslidertosettheareaheightin2dotincrement.

OSD Menu

60

Sub Menu Setting Options (Factory default)

Shape Box Box(Mask) Brackets Enclosure

Setstheareashapeofthesafetyzonemarker.

[Box]:

[Box(Mask)]:

[Brackets]:

[Enclosure]:

LineWidth Thick Normal Thin

Setsthewidthofthesafetyzonemarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthesafetyzonemarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthesafetyzonemarkerline.

HPosition -2048to2048 Adjuststhemarkerhorizontalpositionwiththesetaspectandsize.

-1920to1920

VPosition -1080to1080 Adjuststhemarkerverticalpositionwiththesetaspectandsize.

OSD Menu

61

Sub Menu Setting Options (Factory default)

AreaMarker1,21 Therearetwotypesof[AreaMarker]:1and2,whichsharethesamesettings.[AreaMarker]isused tocheckaspecificareausingarectangularbox.

Enable On,Off SwitchestheareamarkerOn,Off.

HPosition 0to4086 Setsthestartposition(x-coordinate)todrawtherectangle.(inincrements of2) 0to3830

VPosition 0to2150 Setsthestartposition(y-coordinate)todrawtherectangle.(inincrements of2)

Width(dot) 10to4096 Setsthewidthoftherectangle.(inincrementsof2)

10to3840

Height(dot) 10to2160 Setstheheightoftherectangle.(inincrementsof2)

Mask Black Half Off

Switchesthemaskcolor(inthemarker).

Line On,Off When[Mask] [Black]or[Half] TurnsOn/Offtheoutlinesoftherectangularbox.

LineWidth Thick Normal Thin

When[Mask] [Off]or[Line] [On] Setsthewidthoftheareamarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

When[Mask] [Off]or[Line] [On] Setsthecoloroftheareamarkerline.

LineBrightness High,Low,Half When[Mask] [Off]or[Line] [On] Setsthebrightnessoftheareamarkerline.

OSD Menu

62

Sub Menu Setting Options (Factory default)

CenterMarker2 [CenterMarker]showsthecenteroftheimage.

Enable On,Off SwitchesthecentermarkerOn,Off.

Size Large Middle Small

Setsthesizeofthecentermarker.

LineWidth Thick Normal Thin

Setsthewidthofthecentermarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthecentermarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthecentermarkerline.

GridMarker2 [GridMarker]ismarkerusedtocheckthehorizontalandverticalposition.

When[Distance] [***dots] When[Distance] [***%(UHD)]

Enable On,Off SwitchesthegridmarkerOn,Off.

Distance 160dots 240dots 320dots 80%(UHD) 83%(UHD) 85%(UHD) 88%(UHD) 90%(UHD) 93%(UHD) 95%(UHD)

Setsthehorizontalandverticallinedistance.

[160/240/320dots]:Setsthelinedistancetotheselectednumberofdots. [80%(UHD)to95%(UHD)]:Thisindicatesthepercentageofthedisplay

areaofthe3840x2160area.Theareaoftheselectedratioisindicated bythemarker.

LineWidth Thick Normal Thin

Setsthewidthofthegridmarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthegridmarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthegridmarkerline.

OSD Menu

63

1 The marker is not displayed in the following cases: - When there is no signal, unsupported signal, or a channel with [Input Configuration] not set is selected

- When an enlarged image is displayed

- During the execution of [Playback File] under [Screen Capture]

- When a [Test Pattern] is displayed 2 The marker is not displayed in the following cases:

- When an enlarged image is displayed

Details of the factory default settings for marker preset

Item Factory default

Marker 1 to 4 Marker 5

Aspect Marker Enable Off On

Mask Off Half

Aspect Ratio 16:9 16:9

When Variable is selected 1.78:1 1.78:1

Line On On

Line Width Normal Normal

Line Color White Gray

Line Brightness Low Half

H Position 0 0

V Position 0 0

Safety Zone Marker 1, 2 Enable Off On

Aspect Ratio 16:9 16:9

When Variable is selected 1.78:1 1.78:1

Area Size 80% Variable (dot)

Rate (%) 80 80

Width (dot) 3276 2200 (400*)

3072

Height (dot) 1728 100 (400*)

Shape Box Box (Mask)

Line Width Normal Normal

Line Color White Gray

Line Brightness Low Half

H Position 0 0 (1650*)

V Position 0 -850 (-800*)

OSD Menu

64

Item Factory default

Marker 1 to 4 Marker 5

AreaMarker1,2 Enable Off On

HPosition 240 240(3500**)

VPosition 120 120(60**)

Width(dot) 240 240

Height(dot) 120 120(240**)

Mask Off Half

Line On On

LineWidth Normal Normal

LineColor White Gray

LineBrightness Low Half

CenterMarker Enable Off On

Size Middle Small

LineWidth Normal Normal

LineColor White White

LineBrightness Low Half

GridMarker Enable Off On

Distance 160dots 85%(UHD)

LineWidth Normal Normal

LineColor White White

LineBrightness Low Half

*WhenSafetyZoneMarker2isused

**WhenAreaMarker2isused

OSD Menu

65

Function Settings Thismenuisusedtosettheimagesignalinformationdisplayandthecinemacameralinkfunction.

Sub Menu Setting Options (Bold: factory default)

TimeCode1 Displaythetimecodesuperimposedonthesignal.

VITC 01:23:45.05

Enable On,Off SwitchesthetimecodedisplayOn,Off.

Type VITC LTC

Selectsthetype.

ThissettingbecomesinvalidwhenHDMIsignalisinputandisfixedto[VITC].

Size Large Small

Selectsthesize.

Position TopLeft TopRight Bottom Left BottomRight

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display. When[TopLeft]or[TopRight]isselected: Whensetto[AudioLevelMeter] [Enable] [On],thetimecodewillnotbe displayed.

HOffset 0to1460(0) Adjuststhedisplaypositionofthetimecode.

When[MultiView(Dual)]isdisplayed,the[HOffset]settingisinvalid. 0to1332(0)

TypeStringDisplay On,Off SetsdisplayofVITC/LTCstrings.

Brightness Normal,Half SetstheBrightnessofthestrings.

AudioLevelMeter1 Configuresvarioussettingsfortheaudiolevelmeter.Displaystheaudioleveloftheselectedchannel number.

Whenusingdualorquadscreens,setting[ChannelSettings] [Audio Input]to[Automatic]willdisplaymultipleaudiolevelmeters.Youcandisplayuptoeightchannelson thescreenoverall.

When[ChannelSettings] [AudioInput]issetto[Automatic]

- Whendisplayingas[MultiView(Quad)],[ChannelNumber]becomes[2CH].

- Whendisplayingas[MultiView(Dual)],[ChannelNumber]becomes[4CH].

Enable On,Off SwitchestheaudiolevelmeterOn,Off.

ChannelNumber (SDI)

2CH 4CH 6CH 8CH

SetsthenumberofchannelsdisplayedwhenSDIsignalisinput.Options changeaccordingtothesettingfor[SDIGroup]under[AudioSettings]. When[SDIGroup] [CH1-CH8] [2CH]:CH1toCH2 [4CH]:CH1toCH4 [6CH]:CH1toCH6 [8CH]:CH1toCH8 When[SDIGroup] [CH9-CH16] [2CH]:CH9toCH10 [4CH]:CH9toCH12 [6CH]:CH9toCH14 [8CH]:CH9toCH16

OSD Menu

66

Sub Menu Setting Options (Bold: factory default)

ChannelNumber (HDMI)

2CH 4CH 6CH 8CH

SetsthenumberofchannelsdisplayedwhenHDMIsignalisinput. [2CH]:CH1toCH2 [4CH]:CH1toCH4 [6CH]:CH1toCH6 [8CH]:CH1toCH8

ChannelOrder Normal Grouping(1-4,5-8)

Setstheorderofchannels.

[Normal]:Ontheleftside,CHs1,3,5,7(rightside:CHs2,4,6,8)or CHs9,11,13,15(rightside:10,12,14,16)aredisplayed.

[Grouping(1-4,5-8)]:Ontheleftside,CHs1,2,3,4(rightside:CHs5, 6,7,8)orCHs9,10,11,12(rightside:CHs13,14,15,16)are displayed.

Size Large Small

Setsthesizeofthedisplay.

Position Normal Left

Selectsthedisplayposition.

[Normal]:Displaystheaudiolevelmeteronbothends. [Left]:Indicationontherightsideisdisplayedtowardthecenterofthe

screen.Thispreventstheindicationfromoverlappingwiththebanner.

PeakHold On,Off Onesecondofaudiosignalatthepeakiskept.

ReferenceLevel -40to0(-20) Setsthereferencelevel.

Brightness Normal Low Half

Setsbrightnessfortheaudiolevelmeter.

WaveFormMonitor1 Configuresvarioussettingsforthewaveformmonitor.Onthewaveformmonitor,thehorizontalaxis showsthehorizontalresolutionofthevideoandtheverticallineshowsthesignallevel.Totherightof thewaveformmonitor,[ColorRange]and[HDRRange]information(verticalline)isdisplayed.

Signallevel

Horizontalresolutionofvideo

Enable On,Off SwitchesthewaveformmonitorOn,Off.

SelectSignal Y,Cb,Cr,R,G,B Setsthewaveformtobedisplayed.

OSD Menu

67

Sub Menu Setting Options (Bold: factory default)

DisplayType All Line

Setsthedisplaytype.

[Line]:Thedataforonelineisdisplayed.

SelectLine 1to2160 Selectsthelinetobedisplayedwhen[Line]isselected.

Scale Automatic IRE SMPTEST2084(PQ) HybridLog-Gamma CanonLog CanonLog2 CanonLog3 S-Log2 S-Log3 ARRI(Rec2100-PQ- 1K-100)

ARRI(Rec2100-HLG- 1K-200)

Setsthescaleofthewaveformmonitor.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color Range]settings.

When[SMPTEST2084(PQ)],[CanonLog],[CanonLog2],or[CanonLog3]is set(including[Automatic]): When[Gamma/EOTF] [SMPTEST2084(PQ)],theitemisdisplayedin accordancewiththe[ColorRange]settings([Limited2]issetto[Limited]and[SDI Full(4-1019)]issetto[Full]).

ReferenceLine 4to1023 Aguideisdisplayedatthespecifiedposition.[ReferenceLine]isnot displayedwhen[1023]isselected.

ReferenceLevel Automatic Manual

Setstherangeofthereferencelevel.Tintstheoutsideoftherangeofthe referencelevel. Inthecaseof[Gamma/EOTF]correspondingtotheHDRrange,partsthat exceedtheHDRrangearetinted. When[ColorRange] [Limited],outsidethelimitedrangeistinted.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color Range]settings.

ReferenceLevel High

468to1023 Setsthereferencedisplaylevel(high).[ReferenceLevelHigh]isnot displayedwhen[1023]isselected.

ReferenceLevel Low

0to468 Setsthereferencedisplaylevel(low).[ReferenceLevelLow]isnot displayedwhen[0]isselected.

Color Setsthesignalstobedisplayedandthecolorofsignalsexceedingthereferencelevel.

Y White Red Green Blue Yellow Cyan Magenta

[Y],[Cb],[Cr],[R],[G],[B]:Selectsthecoloroftheselectedsignal. Defaultvalueofeachsignalisshownbelow. Y(White),Cb(White),Cr(White),R(Red),G(Green),B(Blue)

[ReferenceLevelHigh],[ReferenceLevelLow]:Selectsthecolorofthe signaloftheselectedreferencelevel. Defaultvalueofeachreferencelevelisshownbelow. ReferenceLevelHigh(Magenta),ReferenceLevelLow(Cyan)

Cb

Cr

R

G

B

ReferenceLevel High

ReferenceLevel Low

OSD Menu

68

Sub Menu Setting Options (Bold: factory default)

Brightness

Automatic Normal Low

SetstheBrightnessofthewaveformmonitor.

[Automatic]:Brightnessisautomaticallyadjustedaccordingtothecontrast valueandaverageluminancevalueoftheinputsignal.

Position Bottom Left BottomRight

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display.

Size Large,Middle,Small Setsthesizeofthedisplay.

VectorScope1 Configuresvarioussettingsforthevectorscope.Vectorscopedisplaystheintensityofcolorsignals andhuewiththehorizontalaxisshowingthecolordifferencesignalCbandtheverticallineshowing Cr.

Red

Green

Yellow Blue

Cyan

Magenta

(Cb,Cr)=(255,255)

(Cb,Cr)=(0,0)

Cr

Cb

Enable On,Off SwitchesthevectorscopeOn,Off.

Target 75% 100% 75%+100%

Setsthetarget.

Position BottomLeft Bottom Right

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display.

Size Large,Middle,Small Setsthesizeofthedisplay.

Histogram1 Displaystheluminancedistributionofthevideo.

LuminanceDistribution

SDRRatio

AverageLuminance

PeakLuminance

BeyondHDRrange

HDRRatio

Enable On,Off Switchesbetweendisplayingorhiding[Histogram].

OSD Menu

69

Sub Menu Setting Options (Bold: factory default)

Color Automatic Normal FalseColor

[Automatic]:Unless[PictureFunctionSettings] [FalseColor] [Enable] issetto[Off],itwillautomaticallyadjustthedisplaytomatchthe[False Color]settings.

[Normal]:Displaysinmonochrome. [FalseColor]:When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or

[HybridLog-Gamma],thenitwilladjustthedisplaytomatchthe[False Color]settings. When[FalseColor] [Enable]is[FalseColor1]or[Off]:Matchthe [FalseColor1]settings. When[FalseColor] [Enable]is[FalseColor2]:Matchthe[False Color2]settings.

Gain x1,x2,x3 Increasesthedisplayedgraphsize.

HDRRange On On(Clip) Off

[On]:AreasthatexceedtheHDRrangewillbetinted. [On(Clip)]:AreasthatexceedtheHDRrangeandareasthatexceedthe

HDRrangeandareclippedwillbetinted. [Off]:AreasthatexceedtheHDRrangewillnotbetinted.

HDR/SDRRatio On,Off When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or[HybridLog- Gamma] Switchesbetweendisplayingorhiding[HDR/SDRRatio].Theratio calculationforHDR/SDRusesthe[FalseColor] [HDR/SDRBorder] settings.

Peak/Ave.Luminance On,Off When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or[HybridLog- Gamma] Switchesbetweendisplayingorhiding[Peak/Ave.Luminance].

Size Large,Small Setsthesizeofthedisplay.

Fixedto[Small]during[SingleInputDualView].

OSD Menu

70

Sub Menu Setting Options (Bold: factory default)

FrameLuminance Monitor1

When[Gamma/EOTF] [SMPTEST2084(PQ)]or[HybridLog-Gamma],"Max./Ave.Luminance" fortheentirescreen(frame)isdisplayed.Forotherconditions,"Max./Ave.GradationValues" isdisplayed.Theframeluminancemonitorcanbeusedwhentheresolutionis[4096x2160], [3840x2160],[2048x1080]or[1920x1080].

Luminancegraph

Currentvalueforpeakluminance (cumulativemaximumvalue)

Currentvalueforaverageluminance (cumulativemaximumvalue)

Peakluminance

Average luminance

Luminance distributiongraph

Ratiograph

HDRRatio SDRRatio

Theupdatetimefor[FrameLuminanceMonitor]maytakealongduration,orgraphindicationof[Frame LuminanceMonitor]mayberesetwhendisplayingthe[FrameLuminanceMonitor]andoperatingtheOSD menu.

Enable On,Off Sets[FrameLuminanceMonitor]onoroff.Obtainstheluminancevalue whenvalid.

Display All LuminanceGraph HDR/SDRRatioGraph LuminanceValue Off

Setswhethereachgraphisdisplayed.

[All]:Displays[LuminanceGraph(Includingluminancevalue)]and[HDR/ SDRRatioGraph].

[LuminanceGraph]:Displays[LuminanceGraph(Includingluminance value)].

[HDR/SDRRatioGraph]:Displays[HDR/SDRRatioGraph]. [LuminanceValue]:Displaysthepeakandaverageluminancevalues. [Off]:Doesnotdisplayanygraphs.

OSD Menu

71

Sub Menu Setting Options (Bold: factory default)

LuminanceGraph Settings

Sets[LuminanceGraph]displaymethod.

Luminance Distribution

On,Off Switchesbetweendisplayingandnotdisplayingtheluminancedistribution graph.

Color Automatic Normal FalseColor

[Automatic]:Unless[PictureFunctionSettings] [FalseColor] [Enable] issetto[Off],itwillautomaticallyadjustthedisplaytomatchthe[False Color]settings.

[Normal]:Displaysinmonochrome. [FalseColor]:When[Gamma/EOTF]issetto[SMPTEST2084(PQ)]or

[HybridLog-Gamma],thenitwilladjustthedisplaytomatchthe[False Color]settings. When[FalseColor] [Enable]is[FalseColor1]or[Off]:Matchthe [FalseColor1]settings. When[FalseColor] [Enable]is[FalseColor2]:Matchthe[False Color2]settings.

Reference LuminanceLevel- Peak

Automatic Manual

[Automatic]:Worksinconjunctionwiththe[HDRRange]settingsto automaticallytinttheareasthatexceedthepeakluminance.

[Manual]:Setstheupperlimitforpeakluminance.

400to10000(1000) Setwhenusing [Manual].Areasthatexceedthesetvaluewillbetinted. (400to4000:incrementsof100.4000to10000:incrementsof1000)

Ave. 100to1000(400) Areasthatexceedthesetvaluewillbetinted.(incrementsof100)

ReferenceLum. RiseLevel-Peak

0to1000(400) Setsthereferencevalueforpeakluminanceriselevel.(incrementsof 10cd/m2)

Ave. 0to1000(200) Setsthereferencevalueforaverageluminanceriselevel.(incrementsof 10cd/m2)

HDR/SDRRatioGraph Settings

Setsthe[HDR/SDRRatioGraph]displaymethod.TheratiosforSDRandHDRusethe[FalseColor] [HDR/SDRBorder]settingsaswellasthesettingsforeachrange.

Type HDR/SDR HDR

[HDR/SDR]:DisplaystheratiobetweentheHDRandSDRareas. [HDR]:DisplaystheratioofluminanceintheHDRarea.

Scale Automatic,100%, 75%,50%,25%,10%, 5%

When[Type] [HDR] Sets[Scale]oftheluminancevalue.

Size Large,Small Setsthesizeofthedisplay.

Fixedto[Small]during[SingleInputDualView].

Reset Resetsthedisplayedcontent.

Export Theluminanceinformationobtainedwhen[FrameLuminanceMonitor]isvalid,isexportedtotheUSB memory.

PixelValueCheck1 When[Gamma/EOTF] [SMPTEST2084(PQ)]or[HybridLog-Gamma] TheluminanceandRGBvalueofthespecifiedpixel(cursor)positionaremeasuredanddisplayed. Thepixelvaluecheckcanbeusedwhentheresolutionis[4096x2160],[3840x2160],[2048x1080]or [1920x1080].

ItmaytaketimetorefreshwhenusingtheOSDmenuwhile[PixelValueCheck]isdisplayed.

Enable On,Off SwitchesthepixelvaluecheckOn,Off.

HPosition 1to4096(960) Setsthepixelposition(horizontal).

VPosition 1to2160(540) Setsthepixelposition(vertical).

OSD Menu

72

Sub Menu Setting Options (Bold: factory default)

ResetPosition Normal Around Peak

Luminance

SetsoperationwhentheRESETbuttonispressed.

[Normal]:Resetsthevaluetothedefaultvalue. [AroundPeakLuminance]:Movesclosertotheareaofpeakluminance

insidethedisplayimage.

ChromaticityDiagram On,Off SwitchesthechromaticitydiagramOn,Off.

[On]:Displaysthechromaticitydiagram.Thechromaticitydiagramis displayedonlywhen[ColorGamut]and[Gamma/EOTF]aresetas shownbelow.

[ColorGamut]:ITU-RBT.2020 [Gamma/EOTF]:1.0,2.2,2.35,2.4,2.6,SMPTEST2084(PQ), HybridLog-Gamma(exceptforHybridLog-GammaRGB)

Whenthepositiontodisplay[WaveFormMonitor]or[VectorScope]issetto [BottomLeft],thisitemmaynotbedisplayeddependingonthesizesettingfor eachitemtobedisplayed.

TestPattern White(1023) White(940) Gray Black(64) Black(0) Ramp ColorBars ColorBars(PQFull) ColorBars(PQLimited) ColorBars(HLG) PLUGE PLUGE(PQ/HLG) Off

Setsthetestpatternbuiltintothemainunit.

Ifthepoweristurnedoffonceandthenbackon,thetestpatternwillnotbe displayed.

Thetestpatternwillbeerasedinthefollowingcases: - WhenachannelischangedusingtheCHbutton,Fbuttonassignedfor

ChannelUP/ChannelDOWN,or[SelectChannel]under[ChannelSettings]

- Whenchanging[InputConfiguration]or[SelectInputSignal]under[Channel

Settings]

- When[ResetAllSettings]isexecuted

SignalMonitoring Monitorstheinputsignalstatus.

[SignalMonitoring]cannotbeusedinthefollowingcases: - When[SingleInputDualView]isdisplayed

- Whenanenlargedimageisdisplayed

- Duringdisplayofthetestpattern

- Duringexecutionof[PlaybackFile]under[ScreenCapture]

Whenanerrorisdisplayed,[InMonitorDisplay]willnotbeshown. Thepositiontheerrorisdisplayedcanbeadjustedwith[InMonitorDisplay] [Position].

Control On,Off Setswhether[SignalMonitoring]isusedornot.

ErrorHold On(Notimeout) On(5sec.) Off

Setsthelengthoftimefordisplayingerrors,whentheyaredetected.

[On(Notimeout)]:Errorscontinuetobedisplayed.Tohidethedisplayed error,presstheRESETbuttonwhenclosingtheOSDmenu.

[On(5sec.)]:Thedisplayederrorwilldisappear5secondsaftertheinitial detection.

[Off]:Onlydisplayserrorsduringtheperiodwhentheyaredetected.The displayederrormessagewilldisappearoncetheerrorends.

NoSignal/Unsupported Signal

On,Off Displaysanerrorwhenthereis[NoSignal]or[UnsupportedSignal].

OSD Menu

73

Sub Menu Setting Options (Bold: factory default)

2SILinkOrder On,Off Displaysanerrorwhenthecablesinsertedintotheinputterminalsarein thewrongorderwhenusingsignalsinputvia[2SampleInterleave].

SDICRCError

On,Off DisplaysanerrorwhenanincorrectSDIsignalisdetected(CRCerror).

8K2SIFormat

On,Off MonitorstheinputsignalstatusforthefourterminalsusingtheSDIsignal when[ChannelSettings] [SelectInputSignal]issetto[Automatic].

8K2SISwitching

On,Off Whenthereisno[8K2SIFormat]error,displayswhileswitchingvideo betweeneachterminal(12G-SDIsignalonly).

Doesnotoperateinthefollowingcases: - When[FrameHold]is[On]

Export ExportstheerrorhistorytoUSBmemory.Thefilenameissignal_error_xxx.txt(xxxisanumber).

ErrorLog Displayserrorhistory.

ScreenCapture Capturesthescreen.

Capture Capturesthescreen.Thedataissavedunderthename"YYYYMMDD_ hhmmss.bmp"or"YYYYMMDD_hhmmss.jpg"intherootfolderofthe USBmemory.

FrameHold On,Off Pausesthevideo.

CaptureSource All Video

Selectsthesourcestocapture.

[All]:Everythingiscapturedincludingvideoassistancefunctionssuchas markersandwaveformmonitoraswellasOSDmenu.

[Video]:Onlyvideosignalsarecaptured.

FileType Bitmap JPEG

SetstheFileTypeoftheimagetocapture.

CreateHDR/SDR CompareFile

On,Off CreatesafilethatletsyoucomparethebrightnessofHDRandSDR imagesonacomputer.Whensaving,[_pc]isappendedtothefilename.

PlaybackFile SelectFile Execute

Playsbackcapturedimages.

[SelectFile]:Selectsafile. [Execute]:Playsbacktheimage.

WhenplayingbackcapturedimagesonothervideodisplayorPC,colormaynot beplayedbackprecisely.

Filescreatedusing[CreateHDR/SDRCompareFile]willnotbedisplayedinthe [SelectFile]screen.

FinishPlaybackFile Finishesplayback.

OSD Menu

74

Sub Menu Setting Options (Bold: factory default)

CameraLink SetsthefunctionstolinkwithCinemaEOScamerasandARRI/Panasoniccinemacameras.

AutomaticAdjustment (CINEMAEOS)

When[PictureMode] [CINEMAEOSSYSTEM],[InputConfiguration] [12-3G/HD-SDI] ( [3G/HD-SDI], [6G/3G/HD-SDI])or[3G-SDIRAW] Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTablewhen[ColorGamut/ Gamma/EOTF],[ColorTemperature],and[ColorRange]areallsetto[On]. ( 77)

ColorGamut/Gamma/ EOTF

On,Off Theimagequalityofthedisplaycorrespondstothecamera'ssettings.

ColorTemperature On,Off

DisplayColorGamut ITU-RBT.709 ITU-R BT.2020 DCI-P3

Setsthecolorgamutshownonthedisplaywhenthecamera's[Color Space]issetto[CinemaGamut]or[DCI-P3+].

AutomaticAdjustment (ARRI)

When[PictureMode] [User6]to[User7],[InputConfiguration] [12-3G/HD-SDI]( [3G/HD-SDI], [6G/3G/HD-SDI]) Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTable.( 78)

UserLUT Rec2100-PQ-1K-100 Rec2100-HLG-1K-200 3D-LUT1-8

When[AutomaticAdjustment(ARRI)] [On] Setsthecolorgamutandgamma/EOTFshowninthedisplay.

AutomaticAdjustment (VARICAM)

When[PictureMode] [User6]to[User7],[InputConfiguration] [12-3G/HD-SDI]( [3G/HD-SDI], [6G/3G/HD-SDI]) Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTable.( 78)

UserLUT V-Log to V-709 3D-LUT1-8

When[AutomaticAdjustment(VARICAM)] [On] Setsthecolorgamutandgamma/EOTFshowninthedisplay.

Anamorphic On,Off WhenaCanoncameraisconnected,displaysinaccordancewiththe settingswhenanamorphiclensdisplaysettingsareincludedinthecamera metadata.

AreaMarker1 ARRIFrameline1A ARRIFrameline1B Off

WhenanARRIcinemacameraisconnectedtothisdevice,the[HPosition], [VPosition],[Width],and[Height]forthe[AreaMarker1]changedepending onthemetadata.

Thiscannotbedisplayedwhen[MarkerPreset]is[Off].

Tally

On,Off Thedisplay'stallylampwillilluminateinredwhenthecamerastarts recording.Thetallylampwillgooutwhenthecamerastopsrecording.

OSD Menu

75

Sub Menu Setting Options (Bold: factory default)

Fan

On,Off Allowsyoutolinkstoppingthefantothecamera'srecordingoperation(For CinemaEOScameras,Canonprofessional-usevideocameras,orARRI cinemacamerasthatarecompatiblewiththisvideodisplay). Set[SystemSettings] [FanControl]to[On]toenablethefantobe stoppedandthenset[Fan]to[On]tostopthefanwheneverthecamera startsrecording.Atroomtemperature(25C),thefanremainsofffor approximatelyoneminute*.Thefanoperatesatafasterspeedthanusual beforeandafterthefanisstoppedtolowertheinternaltemperature. * Maxofabout6minuteswhenusingDCpower

Maxofabout10minuteswhenusingDCpower

Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage [Fanwillberotatedasthetemperatureishigh.]isdisplayedandthefanstarts rotatingapproximatelytensecondslater.Sincethetemperatureofthemainunit hasincreased,thefanrotatesfasterthanusual.

Thevideodisplaysfanmaystartrotatingbeforethecamerarecordingstartsdue tothetemperatureincreaseinsidethemainunit.

Ifthemessage[Invalidoperationduetohightemperature.]isdisplayed,thefan cannotbestoppedevenwhen[On]isselectedforthisitem.Waituntiltheinternal temperaturelowers.However,thefanmaynotstopinsomeconditions,for examplewhenusedatahightemperature.

CameraInformation Automatic On Off

Setsconditionstodisplaycamerainformation.

[Automatic]:Camerainformationisdisplayedfor4secondswhenthe informationhaschanged.

[On]:Camerainformationisalwaysdisplayed. [Off]:Camerainformationisnotdisplayed.

OSD Menu

76

1 Theinformationdisplayfunctionsthatcanbedisplayedvarydependingonthevideodisplay'ssettingsortheinputsignalstatus. =:Canview:Cannotview

Time

Code

Audio Level

Meter

Wave

Form

Monitor

Vector

Scope

Histo-

gram

Frame

Luminance

Monitor

Pixel Value

Check

When[ChannelSettings] [InputConfiguration]issetto

[HD/SD-SDI] = =

Whilezooming:When[Zoom] [Type]issetto[Normal] = =

When[FrameHold]is[On]

(Forprogressivesignals) = = = = =

When[FrameHold]is[On]

(ForinterlacedorPsFsignals) = = =

When[Peaking] [Enable]issetto[Peaking1]or

[Peaking2] = = = = =

Duringexecutionof[PlaybackFile]under[ScreenCapture]

Whenthedisplaypositionand[AudioLevelMeter]tobe

displayedisthesame = = = = =

When[TestPattern]isdisplayed

When[MultiView(Quad)]isdisplayed = =

When[MultiView(Dual)]isdisplayed = = = =

When[SingleInputDualView]isdisplayed = = = = = =

When[ChannelSettings] [PictureMode] [Type]isset

to[L/R]:When[MultiView(Dual)]or[SingleInputDualView]

isdisplayed

= = = =

When[ChannelSettings] [PictureMode] [Type]isset

to[L/R],andwhenasinglescreenisbeingused = =

When[PictureFunctionSettings] [CompareView]

[Enable]issetto[On]:When[SingleInputDualView]isset

to[Off]andalsotheresolutionis4096x2160or3840x2160

= =

When[WaveFormMonitor]isdisplayed:When[WaveForm

Monitor] [SelectSignal]is[R],[G],[B] = = = = = =

When[WaveFormMonitor] [Size] [Large]isselectedwhile[WaveFormMonitor]isdisplayed:

Whenthe[Position]settingfor[WaveFormMonitor]

and[VectorScope]arethesame = = = = = =

During[MultiView(Dual)]display = = =

During[SingleInputDualView]display = = = = =

WhenanI/PsF4Ksignalisdisplayedononescreenand

whenthe[WaveFormMonitor]and[VectorScope][Position]

settingsarethesame

= = = = = =

Whenthereisnosignalortheinputsignalisnotsupported = = = =

Whendisplayingvideoatresolutionsotherthan4096x2160

/3840x2160/2048x1080/1920x1080 = = = =

Whendisplayingvideoatresolutionlowerthan1280x720 = =

OSD Menu

77

Parameter of Cinema EOS cameras and Canon displays

CinemaEOScameras Canondisplay

ColorSpace ColorGamut Color Temperature

BT.709 ITU-RBT.709 D65

BT.2020 ITU-RBT.2020 D65

DCI-P3 DCI-P3 DCI-P3

DCI-P3+ DCI-P3+to709 D65

DCI-P3+toDCI DCI-P3

CinemaGamut CinemaGamutto709 D65

CinemaGamutto2020 D65

CinemaGamuttoDCI DCI-P3

RAWGamut CinemaGamutto709 D65

CinemaGamutto2020 D65

CinemaGamuttoDCI DCI-P3

CinemaEOScameras Canondisplay

Gamma/EOTF Gamma/EOTF HDRRange

CanonLog CanonLog(HDR)

CanonLog2 CanonLog2(HDR)

RAWGamma

CanonLog3 CanonLog3(HDR)

ST2084,PQ SMPTEST2084(PQ) 1000

2000

Normal(BT.709) 2.2

WideDR

EOSStd.

DCI-P3 2.6

OSD Menu

78

Parameter of ARRI Cinema camera and Canon displays

ARRICinemacamera Canondisplay

ColorSpace DisplayColor Gamut

CDL/UserLUT ColorGamut Gamma/EOTF HDRRange

REC709 ITU-RBT.709 2.2

REC2020 ITU-RBT.2020 2.2

WideGamutLogC Rec2100-PQ- 1K-100

ARRI(Rec2100- PQ-1K-100)

ITU-RBT.2020 SMPTEST2084 (PQ)

1000

Rec2100-HLG- 1K-200

ARRI(Rec2100- HLG-1K-200)

ITU-RBT.2020 Hybrid Log-Gamma

3D-LUT1-8 UserLUT1-8

Parameter of Panasonic Cinema camera and Canon displays

PanasonicCinema camera

Canondisplay

ColorSpace DisplayColor Gamut

CDL/UserLUT ColorGamut Gamma/EOTF HDRRange

V-709 ITU-RBT.709 2.2

V-Log V-LogtoV-709 VARICAM(V-Log toV-709)

ITU-RBT.709 2.2

3D-LUT1-8 UserLUT1-8

OSD Menu

79

Picture Function Settings Thismenuisusedtosetvideoassistancefunctions,forexample.

Sub Menu Setting Options (Bold: factory default)

Peaking1 Theoutlineisdisplayedinacolor,usedtocheckthefocus.Customizespeakingswhichareassigned toPeaking1orPeaking2.

Enable Peaking1 Peaking2 Off

SwitchesthepeakingdisplaymodeandalsosetspeakingtoOff.

Monochrome When[Peaking1] On,Off When[Peaking2] On,Off

Displaysvideoinmonochrome.

Frequency When[Peaking1] Low,Middle,High When[Peaking2] Low,Middle,High

Setsthecentralfrequencyofcontourenhancementsignals.

Range -3~3(0) Setsthewidthoftherangetobecolored.

Color White,Red,Green, Blue,Yellow,Cyan, Magenta

Setsthecolortobeused.

FalseColor1 Displaysdifferentcolorsforthevideo'sbrightnesslevelstomakeiteasiertochecktheexposureand brightnessdistribution.Customizesthefalsecolorandsetsittofalsecolor1orfalsecolor2.

Enable FalseColor1 FalseColor2 Off

SwitchesbetweenFalseColordisplaymodeandnon-display.

Type Automatic IRE SMPTEST2084(PQ) HybridLog-Gamma

Setsthetintcolordisplaymethod.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]settings.

When[IRE]isselected,[Range-SDR]and[Range-HDR]settingsbecome invalid.

HDR/SDRBorder 100,200 SetstheboundaryvaluefortheSDR/HDRareas.

Range-SDR When[FalseColor1] On,Off When[FalseColor2] On,Off

SetswhethertotinttheSDRarea.

When[On],setsthesizeoftheareatobetinted.(10to100:incrementsof 5,100to200:incrementsof10) Monochrome/Brown:10to190(90*)(40) Brown/Monochrome:20to200(100*)(85) *When[HDR/SDRBorder]is[100]

OSD Menu

80

Sub Menu Setting Options (Bold: factory default)

Range-HDR When[FalseColor1] Automatic Automatic(OverRange) Manual When[FalseColor2] Automatic Automatic(OverRange) Manual

Setsthetintcolorrange.

[Automatic]:Setstheupperlimitautomaticallyinaccordancewiththe [Gamma/EOTF]settings.

When[Manual]or[Automatic(OverRange)]isselected,setsthesizeof theareatobecolored. Settingwhen[SMPTEST2084(PQ)](100to1000:10increments,1000 to4000:100increments,4000to10000:1000increments) Blue/lightblue:250(150*)to400 Lightblue/green:400to1000 Green/yellow:600to4000 Yellow/orange:800to8000 Orange/red:1000to10000(Onlywhenusing[Manual]) Settingwhen[HybridLog-Gamma](10increments) Blue/lightblue:250(150*)to300 Lightblue/green:300(200*)to500 Green/yellow:400(300*)to700 Yellow/orange:500(400*)to900 Orange/red:600(500*)to1000(Onlywhenusing[Manual]) *When[HDR/SDRBorder]is[100]

RangeCheck1 Displaysvideoinmonochrome,withtheareaswherethesetrangeisexceededareshowntinted. CustomizesRangeCheckandsetsittoRangeCheck1,2.

Enable RangeCheck1 RangeCheck2 Off

SwitchestheRangeCheckdisplaymodeOn,Off.

OverRange Automatic,Manual Displaysvideoinmonochrome,withtheareaswherethesetrangeis exceededareshowntinted.

[Automatic]:When[Gamma/EOTF] [SMPTEST2084(PQ)]or[Hybrid Log-Gamma],onlytheareasthatexceedthe[HDRRange]settingare tinted.

[Manual]:Onlyareasthatexceedtherangesetat[SMPTEST2084(PQ)] or[HybridLog-Gamma]aretinted.

SMPTEST2084 (PQ)

100to10000(1000) When[OverRange] [Manual] Setsthetintcolorrange.(100to1000:10increments, 1000to4000:100increments,4000to10000:1000increments)

HybridLog-Gamma 100to1000(1000) When[OverRange] [Manual] Setsthetintcolorrange.(10increments)

Other 512to1023(940) When[OverRange] [Manual] Setsthetintcolorrange.(1increments)

OSD Menu

81

Sub Menu Setting Options (Bold: factory default)

PeakRange When[RangeCheck1] Automatic,Off When[RangeCheck2] Automatic,Off

When[OverRange] [Automatic] Displaysvideoinmonochromeandthespecifiedhigh-luminanceareasare shownastinted.

[Automatic]:When[Gamma/EOTF] [SMPTEST2084(PQ)]or[Hybrid Log-Gamma],thehigh-luminancerangepartiscolored.

Whenafunctionisexecutedwhile[Automatic]isselected,thescreenenters [SingleInputDualView]mode.

Range -5to5(0) When[PeakRange] [Automatic] Setstheareaofthehigh-luminancerangeparttobecolored.(Increments of1)

2020OutsideofGamut View1

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] Displaysvideoinmonochrome,withtheareaswherethecolorgamutexceedstheselectedcolor gamutshowninred.

Enable On,Off SwitchesbetweenOnandOfffor[2020OutsideofGamutView].

ColorGamut ITU-R BT.709 Native

Setsthe[ColorGamut]tobesetasoutofcolorgamut.

Range 0to512(0) Setstherangewhentintingdarkareas.(1increments) 0:Tintsalldarkareas. 512:Darkareasatthesetvaluesorlessarenottinted.

Monochrome2 On,Off Videoisdisplayedinmonochrome.

BlueOnly2 On,Off Cutsredandgreensignals,anddisplaysonlybluesignalsinmonochrome.

[BlueOnly]cannotbesetwhen[CDL/UserLUT]isasettingotherthan[CDL1-8] or[Off].

RedOff2 On,Off Videoisdisplayedwithredsignalscut.

GreenOff2 On,Off Videoisdisplayedwithgreensignalscut.

BlueOff2 On,Off Videoisdisplayedwithbluesignalscut.

BacklightScan High,Low,Off [BacklightScan]partiallyturnsoffthebacklightareaandreducesthe

imageholdperiodwhendisplayingimages.

CompareView1 Imageshavingdifferentimagequalitysettingsaredisplayedontheleftandrightscreensfor comparison.(When[PictureMode]forleftandrightscreensisthesame)

Whenasignalwitharesolutionof2Korsmallerisdisplayedonasinglescreen,changesto[SingleInputDual View].

When[HDR/SDR]isselectedfor[Type]and[Enable]issetto[On],[BoostContrast]becomes[On].

Enable On,Off SetsComparisonmodeOnorOff.

Type Automatic HDR/SDR CDL/UserLUT

Setsthetypeoftheimagetocompare.

[Automatic]:[HDR/SDR]when[Adjustment] [CDL/UserLUT]is[Off], otherwisesetat[CDL/UserLUT].

[HDR/SDR]:HDRandSDRimagesaredisplayed. [CDL/UserLUT]:Theimageonwhich[CDL]or[UserLUT]isappliedis

displayedonlyintheleftscreen. [Luminance]:Displaysanimagewithadifferentluminance.

Automatic HDR/SDR CDL/UserLUT Luminance

OSD Menu

82

Sub Menu Setting Options (Bold: factory default)

HDR/SDRConvert Method

2020 HDR to 709 SDR 2020HDRto2020SDR UserLUT1-8 Off

When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetsthedisplaymethodofthescreensettoSDR.

[2020HDRto709SDR],[2020HDRto2020SDR]:Settingdiffers accordingtothe[Gamma/EOTF]settings.

[SMPTEST2084(PQ)]:The[UserLUT]correspondingtoeachsetting isapplied.

[HybridLog-Gamma]:The[UserLUT]correspondingtoeachsettingis applied.

[CanonLog(HDR)],[CanonLog2(HDR)],[CanonLog3(HDR)]: [CanonLog],[CanonLog2]or[CanonLog3]isapplied.

[S-Log2(HDR)],[S-Log3(HDR)]:[HDRRange]setting[100]isset. [UserLUT1-8]:Thespecified[UserLUT]isapplied.Afterapplying[User

LUT]theadjustmentinsidethedisplayfixes[ColorGamut]at[ITU-R BT.709]and[Gamma/EOTF]at[2.4].

[Off]:Onlybrightnessislowered.

Contrast(SDR) 500to2000(1000) When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] AdjuststheSDRcontrast.

ColorTemperature (SDR)

Normal, D93,D65, D65Custom, DCI-P3

When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetstheSDRcolortemperature.

Gain(SDR) -15to15(0) When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetstheSDRgain.

UserLUTTarget1 UserLUT1to UserLUT8,Off

When[Type]issetto[CDL/UserLUT]or[Automatic([UserLUT])] Setsthecomparisontarget.

UserLUTTarget2 (Quad) UserLUTTarget3 (Quad)

UserLUT1to UserLUT8,Off

When[Type]issetto[CDL/UserLUT]or[Automatic([UserLUT])] Setsthecomparisontarget.

[UserLUT1-8]:AppliestheUserLUTseparatelyforeachquarterscreen anddisplayscomparisonswhendisplaying[MultiView(Quad)].

OSD Menu

83

Sub Menu Setting Options (Bold: factory default)

LuminanceContrast 1000tothecurrent setting(1000)

ChangestheHDRrangeorsystemgammasettinganddisplaysHDR imageswithdifferentluminanceforcomparison.

HDRRange(PQ) 100to10000(1000) When[SMPTEST2084(PQ)]:ThesetcontrastandHDRrangeare

applied. When[HybridLog-Gamma]:Thesetcontrastandsystemgammaare

applied. Otherthantheabove:Thesetcontrastisapplied.

[Contrast]issetto1000whenitis1000orbelow. When[Contrast]ischanged,[HDRRange(PQ)]ischangedtothesamevalue asthecontrastand[SystemGamma(HLG)]ischangedtothevaluesetin [Automatic]. (Contrast:in1000increments,HDRRange(PQ):100to4000:in100increments/ 4000to10000:in1000increments,SystemGamma(HLG):in0.005increments)

SystemGamma(HLG) 1.000to1.500

1 [Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],[CompareView]:Operationinaccordancewiththeconfigurationofthe

videodisplay

=:Canbedisplayed/set.:Cannotbedisplayed/set.

Peaking False Color Range Check 2020 Outside of

Gamut View Compare View

When[ChannelSettings] [InputConfiguration]

[HD/SD-SDI] = = = =

When[Monochrome],[BlueOnly],[RedOff],[Green

Off],or[BlueOff] [On]

When[ChannelSettings] [PictureMode] [Type]

[L/R] = = = =

Duringexecutionof[PlaybackFile]under[Screen

Capture] = = =

[Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],and[CompareView]cannotbedisplayedsimultaneously. 2 Whenthepoweristurnedoffandon,becomes[Off].

Cannotbesetwhen[Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],or[CompareView] [Enable] [On](otherthan

[Off]).

OSD Menu

84

Network/IMD Settings

Sub Menu Setting Options (Bold: factory default)

LAN Configuresvideodisplay'snetworksettings.

Cannotbesetwhen[PoweronSetting]is[User1]to[User3].

ConfigureanIP Address

Automatic Manual

[Automatic]:ConfiguresanIPaddressautomaticallywithDHCP/AutoIP. [Manual]:ConfigureanIPaddressandsubnetmaskmanually.

Display 192.168.0.1

SubnetMask 255.255.255.0

Wi-Fi ThisisusedtoconnectthevideodisplaytoanetworkusingWi-Fiandcontrolitfromanexternal controldevice.( 21)

Control Infrastructure AccessPoint Off

SetstheWi-Ficonnectionmethod.

[Infrastructure]:ThismethodconnectstoWi-Fiviaanaccesspoint. [AccessPoint]:Thisdeviceactsasanaccesspoint,andthismethod

connectsthedevicedirectlytotheWi-Fidevice.

Infrastructure Setstheaccesspointtoconnectto.Atfactorysettings,theaccesspoint toconnecttoisnotconfigured.

Password Youmayspecifyapasswordifneededbyusingupto24alpha-numerical charactersandsymbols.Thedefaultpasswordisblank.

AccessPoint Configurestheaccesspoint.

SSID EntertheSSID.Thiscanbesetusingupto24alpha-numericalcharacters andsymbols.

Frequency 2.4GHz,5.0 GHz Setsthecommunicationmode.

Channel When[2.4GHz] 1to13(incrementsof1) When[5.0GHz] 36,40,44,48

Setsthechanneltouseforcommunication.

Password Enterthepassword.Thisissetusingbetween8and24alpha-numerical charactersandsymbols. Remembertochangethedefaultpassword.Thedefaultpasswordisthe serialnumber.Theserialnumberistheindividual12-digitnumberassigned toyourproduct,andcanbecheckedonthe[SystemInformation]screen.

Web SettingsforoperatingthisdeviceremotelyusingaWebbrowser.( 23)

Control On,Off Setwhetherornottoreceivecontrolsignalsfromanexternaldevice, connectedusingnetworkconnectionorWi-Ficonnection,inorderto operatethevideodisplayremotelyfromthedevice'swebbrowser.

UserID EntertheuserID.Thisissetusingupto16alpha-numericalcharacters andsymbols.ThedefaultuserIDis[user].

Password Enterthepassword.Thisissetusingbetween8and16alpha-numerical charactersandsymbols.Thedefaultpasswordistheserialnumber.The serialnumberistheindividual12-digitnumberassignedtoyourproduct, andcanbecheckedonthe[SystemInformation]screen.

OSD Menu

85

Sub Menu Setting Options (Bold: factory default)

DisplaySettingLink Adjustment Channel Adjustment/Channel Off

Settingsare linkedbetweendisplaysconnectedviaLAN.Thisdevice's settingvaluesareappliedtoalllinkeddisplays. *Beforelinkingsettings,checkthatthefollowingconditionsaremet. aTurnonthepowertothisdisplayandthedisplay(s)tolinkwith,and checkthattheyareallrecognizedonthenetwork

bChangetheadjustmentorchannelandcheckthattheotherdisplay(s) alsochange

Thedevicesandfirmwareversionsthatcanbelinkedareshownbelow. DP-V3120:Version1.0orhigher DP-V2410:Version1.4orhigher DP-V2420/DP-V2421:Version1.3orhigher DP-V1710/DP-V1711:Version1.3orhigher DP-V2411:Version1.2orhigher DisplaysnotconnectedcanberemovedwiththeRESETbutton.

OperatingtheGPI*orthebuttonsonthisdisplaywillreflectsettingvaluechanges inall.LinkedoperationsusingPayloadID,HDMI,Camera,etc.willnotreflectthe settingschanges.(* )

Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges, somesettingswillnotbecorrectlyexported(settingswillnotbechanged,will reverttofactorydefaults,etc.)

Inanenvironmentwherecommunicationcannotbedoneproperly,suchaswhen thenetworkenvironmentisunstableorthebandwidthisinsufficient,settingsmay notlinkproperly.OnlyconnectdisplaystobecontrolledtotheLAN.IfaDisplay

Controllerisconnected,itmaynotoperateproperly( ). Upto32displayscanhavetheirsettingslinked.

[Bypass](CDL/UserLUT)under[Adjustment] [CDL/UserLUT]isnotlinked.

InMonitorDisplay ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperate thevideodisplayusinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersand tallylightsonthescreen.Youcaninputanycharactersyoulikedirectlyfromthisvideodisplay.( 20)

Control TSL Ver. 5.00 Manual Off

Setswhetherornottoreceivethecontrolsignalfromtheconnected device.

[Manual]:Selecttoinputthecharactersonthisvideodisplay.Doesnot receiveacontrolsignalfromtheconnecteddevice.

Position Top Bottom

Thissetswhetherthecharactersandtallylightswillbedisplayedatthe toporthebottom.

ManualDisplayType Automatic Single DualA,B,DualC,D QuadA,B,C,D

[Automatic]:ChangesdisplayinaccordancewiththeInputConfiguration. [Single]:Single-screendisplay. [DualA,B],[DualC,D]:Dual-screendisplay. [QuadA,B,C,D]:Quadruple-screendisplay.

When[FunctionSettings] [SignalMonitoring] [Control]issetto[On]then [ManualDisplayType]isfixedto[Automatic].

ManualString (Single) (Dual/QuadA) (Dual/QuadB) (Dual/QuadC) (Dual/QuadD) (SingleDualL) (SingleDualR)

When[Control] [Manual] Setsthecharacterstodisplayfortheselected[ManualString].Youcan inputupto16alphanumericcharacters.

OSD Menu

86

System Settings Thismenuisusedtoconfiguresystemsettingsrelatedtothevideodisplay.

Sub Menu Setting Options (Bold: factory default)

Function/ChannelButton SetsthefunctionorchanneltoassigntotheFbuttonsorCHbutton.

DisplayFunction SetsthefunctiontoassigntotheFbuttonsofthemainunit( 15).SelectanFbuttonandassigna functionfromthefollowinglist( 92).DisplayFunction(CDL)

DisplayChannel SetsthechanneltoassigntotheCHbuttononthedisplay.

CH1 CH1toCH20*(CH1) SelectaCHbuttonandregisterachannelnumber.Alistofsettingsunder themenu[ChannelSettings]( 48)isdisplayed.

* :CH1toCH30

CH2 CH1toCH20*(CH2)

CH3 CH1toCH20*(CH3)

Remote(GPI)

Youcanoperatethevideodisplayusinganexternalcontrollersuchasaswitcherthathasbeen connectedtotheREMOTEterminal.Operatesbyconnecting(shorting)theGND(No.8Pin)toNo.s 1to7.

Thisfunctionwillnotworkcorrectlyinthefollowingcases. - Ifthesamefunctionisassignedtomultiplepins.

- Ifthechangestothe[Remote(GPI)]settingandthepinassignmentsweremadewhenthepinswereshorted.

Type Level, ShortEdge

[Level]:Operateswhileshorted. [ShortEdge]:Switchesbetweenoperate/donotoperateforeach

short.

Pin1~Pin7 AssignsfunctionsineachGPIpin.( 19) Functionsthatcanberegistered: SMPTE-C,EBU,ITU-RBT.709,ITU-RBT.2020,AdobeRGB,DCI-P3,User1(2020PQ), User2(2020HLG),User3(DCIPQ),User4(DCIPQD65),User5~User7,CINEMAEOSSYSTEM, ACESproxy(ver.1.0.1),CH1toCH5,Marker1toMarker3,TimeCode,AudioLevelMeter, WaveFormMonitor,VectorScope,Histogram,FrameLuminanceMonitor,FalseColor1/2, Monochrome,BlueOnly,RedOff,GreenOff,BlueOff,CompareView,MENU,TallyGreen,TallyRed, PowerOn,(Notset)

About[Tally] Atallyappearsatthetopofthescreen.Combining[TallyGreen]and[TallyRed]makes[TallyAmber].

[PowerOn]:Canonlyberegisteredto[Pin7].

Language English

SetsthelanguageoftheOSDmenuandmessages.

Date/Time Setstheyear/month/date/hour/minute.

OSD Menu

87

Sub Menu Setting Options (Bold: factory default)

DisplayName Setsthenameofthemainunit.Youcaninputupto16alphanumericcharacters.

OSDSettings

Banner Setsthebannerdisplaymethodforthechannelname,signalinformation,andstatusofthevideo display.

AutomaticDisplay On,Off Automaticallydisplaysthebannerwhentheinputsignalorpicturemode arechanged.

PictureMode On,Off Setswhethertodisplay[PictureMode].

TimeOut On,Off Thebannerautomaticallydisappears.

FunctionButtonGuide On,Off [On]:WhenallOSDarehidden,youcandisplaythelistoffunctions assignedtoanFbuttononthevideodisplaybypressingthejogdial.

[Off]:FunctionButtonGuideisnotdisplayed.

OSDPosition

Mode 1 (4096x2160) Mode2(3840x2160)

[Mode1(4096x2160)]:OSDisdisplayedina4096x2160area. [Mode2(3840x2160)]:OSDisdisplayedina3840x2160area.

OSDSize

Large Small

ThesizeoftheOSDmenucanbeselectedfrom[Large]and[Small].

OSDBrightness

Automatic (High - Middle) Automatic (High-Low) High Middle Low

SetsthebrightnessoftheOSD.

Thebrightnessisautomaticallyadjustedtosuitthescreencontrastwhen [Automatic]isselected.Youcanchoosebetween[High-Low]and [High-Middle]adjustmentranges.

ProtectSettings Locksthesettingssotheycannotbechanged.WhenyoupresstheMENUbutton,[Signal/System Information]appears,butotheroperationsaregrayedoutbecausetheyarelocked.

Password Setapasswordtoprotectsettings.Useafour-digitnumber(0000to 9999).Theinitialpasswordisblank.

ProtectTarget YoucanremovePictureModeandSelectChannelfromtheitemstobe protected.

PictureMode On,Off [On]:Protectsthe[PictureMode]settings. [Off]:Removesthe[PictureMode]settingsfromprotecttarget.

SelectChannel On,Off [On]:Protectsthe[SelectChannel]settings. [Off]:Removesthe[SelectChannel]settingsfromprotecttarget.

FunctionSettings On,Off [On]:Protectsthe[FunctionSettings]settings. [Off]:Removesthe[FunctionSettings]settingsfromprotecttarget.

Protect Select[OK]toprotect.Whenapasswordhasbeenset,enterthe passwordandselect[OK].

UnlockingProtectSettings

Movetheselectionframeto[Protect]andpresstheJogdialfor approximately3seconds.Whenapasswordhasbeenset,enterthe passwordandselect[OK].

OSD Menu

88

Sub Menu Setting Options (Bold: factory default)

PowerIndicator/ButtonLEDSettings

PowerIndicator Brightness

Off 1to5(3)

Adjuststhebrightnessofthepowerindicatoronthemainunit.Thegreater thenumber,thehigherthebrightness.

DisplayButtonLED On,Off SetstheFbuttonsandthelampontheface.

[Off(LuminanceWarningOn)]:When[PeakLuminanceControl]issetto [On],theFbuttonassignedwiththisfunctionwillflashwhendisplay luminanceisrestricted,whiletheotherFbuttonsandthelamponthe facewillgoout.

On, Off(LuminanceWarning On), Off

ButtonNameLighting Time(sec.)

Always,60,30,10,5 Setsthetime(sec)untilthelamponthefacegoesout,ifnooperationis performed.

[Always]:Thelamponthefaceisalwayslit.

PowerSave On,Off Automatically turnsoffvideodisplay'spowersupplywhen there isno videosignalinput.

[On]:Themessage[NoSignal,TurnoffpowerbyPowerSavefunction.]is displayedwhenthereisnosignalinputforapproximately30minutes. Approximately5minuteslater,themessagewillread[NoSignal,Turn offpower.]andthepowerwillbeturnedoff.

FanSettings

Setstheoperationofinternalfan.

FanControl On,Off Fannoisecanbeeliminatedwhenthemainunitisusedduringshootingor whensilentoperationisneeded. Setthisinadvancetostopthefaneithermanuallyorbylinkingitwiththe cameraduringshooting( 75).Whenthisissetto[On],themodechanges sothatthefancanbestopped.Thefansometimesrotatesfasterthan usualbeforestopping.

FanStop On,Off If[FanStop]issetto[On]andwhen[FanControl]issetto[On],thefan canbestopped.Atroomtemperature(25C),thefanremainsofffor approximatelyoneminute*.Thefanoperatesatafasterspeedthanusual beforeandafterthefanisstoppedtolowertheinternaltemperature. * Maxofabout6minuteswhenusingDCpower

Maxofabout10minuteswhenusingDCpower

Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage [Fanwillberotatedasthetemperatureishigh.]isdisplayedandthefanstarts rotatingapproximatelytensecondslater.Sincethetemperatureofthemainunit hasincreased,thefanrotatesfasterthanusual.

Select[Off]torestartthefan.Thefanrotatesfasterthanusual. Ifthemessage[Invalidoperationduetohightemperature.]isdisplayed,thefan cannotbestoppedevenwhen[On]isselectedforthisitem.Waituntiltheinternal temperaturelowers.However,thefanmaynotstopinsomeconditions,for examplewhenusedatahightemperature.

OSD Menu

89

Sub Menu Setting Options (Bold: factory default)

CompatibleSettings SetscompatibilitywithHDMIdevicesandoperationoffunctionsthatdifferaccordingtotheversion ofthevideodisplaysfirmware.

HDMI

Normal Compatible1 Compatible2

[Normal]:Allformatsaresupported. [Compatible1]:Setthisoptionwhenvideoisnotplayedcorrectlyin

[Normal].HDRsignalsofaluminancehigherthanthatofthedisplay mainunitarenotsupported.

[Compatible2]:Setthisoptionwhenvideoisnotplayedcorrectlyin [Normal]or[Compatible1].[4K50.00P/60.00P]andHDRsignalsare notsupported.

HDMI Normal Compatible1 Compatible2 Compatible3

SetstheconnectioncompatibilitywithHDMIequipment.

[Normal]:Allformatsaresupported. [Compatible1]:Setthisoptionwhenvideoisnotplayedcorrectlyin

[Normal].HDRsignalsofaluminancehigherthanthatofthedisplay mainunitarenotsupported.

[Compatible2]:Setthisoptionwhenvideoisnotplayedcorrectlyin [Normal]or[Compatible1].HDRsignalsarenotsupported.

[Compatible3]:Setthisoptionwhenvideoisnotplayedcorrectlyinother settings.[4K50.00P/60.00P]andHDRsignalsarenotsupported.

ColorRange

Normal Compatible

[Normal]:Setsthe[ColorRange]settingtothenewmethodusedin DP-V2420/DP-V2421firmwareversion1.2orlater.

[Compatible]:Setsthe[ColorRange]settingtotheconventionalmethod usedinDP-V2420/DP-V2421firmwareversion1.1orearlier.

ColorRange

Normal Compatible

[Normal]:Setsthe[ColorRange]settingtothenewmethodusedin DP-V2410firmwareversion1.3orlater.

[Compatible]:Setsthe[ColorRange]settingtotheconventionalmethod usedinDP-V2410firmwareversion1.2orearlier.

ColorRange

Normal Compatible

[Normal]:Setsthe[ColorRange]settingtothenewmethodusedin DP-V1710/DP-V1711firmwareversion1.2orlater.

[Compatible]:Setsthe[ColorRange]settingtotheconventionalmethod usedinDP-V1710/DP-V1711firmwareversion1.1orearlier.

BacklightControl

Normal Compatible

[Normal]:HDRimagevisibilityisimprovedcomparedtousingfirmware Version1.1forDP-V2420/DP-V2421.

[Compatible]:DisplaysanequivalentdisplaytousingfirmwareVersion1.1 forDP-V2420/DP-V2421.

ReduceBacklightFlash

On,Off When[Adjustment] [BacklightControl]issettoanoptionotherthan[Off], thescreenmayexhibitaflashincasessuchasswitchingbetweenscenes withalargedifferenceinluminance.Youcanuse[ReduceBacklightFlash] toreducethisphenomenon.

UserLUT

Normal Compatible

[Normal]:Informationdisplayforvideossuchaswaveformmonitors dependsonthestatusfollowingapplicationofUserLUT.

[Compatible]:Informationdisplayforvideossuchaswaveformmonitors dependsonthestatusbeforeapplicationofUserLUT.

When[PictureFunctionSettings] [CompareView] [Enable]issetto[On], fixesas[Normal].

OSD Menu

90

Sub Menu Setting Options (Bold: factory default)

Firmware/LicenseUpdate Thisfunctionisusedtoupdatethevideodisplayfirmware.RefertotheCanonwebsitefordetailed information.

Export/Import1 Setstheexport/importmainmenusettings.

Export

Target USB User1toUser3 LAN

Selecttheexportdestination.

[USB]:ExporttoaUSBmemory. [User1]to[User3]:Exporttothebuilt-inmemoryofthemainunit. [LAN]:ExportstoadisplayconnectedwithaLAN.

Filename When[Target] [USB]or[User1-3] Factorydefaultis"dinfo_dpv****.dat"(****:numberoftheproductname). YoucanchangethenameofthefiletobeexportedtotheUSBmemory within16one-bytecharactersincludingalphabeticalcharacters,numbers, andsymbols.

Display When[Target] [LAN] Selectthedisplaywiththesettingstoexportfromthedisplaysconnected viaLAN.

Besuretoalsoread[DisplaySettingLink]( 85).

Execute Performsexport.

Import

Target USB User1toUser3

Specifythesavedestinationforthefiletobeimported.

Filename Displaysfileswiththeextension".dat"soyoucanselectfromamong them.

Settings All Adjustment ChannelSettings DisplaySettings AudioSettings MarkerSettings Function/Network/ SystemSettings

Selectthesettingstoimport.

Execute Performsimport.

PoweronSetting Last memory User1toUser3

Youcanselectthestateofthedisplaywhenthepoweristurnedon.

[Lastmemory]:Launcheswiththesamesettingsaswhenthepowerwas

turnedofftheprevioustime.

[User1]to[User3]:Itstartsupwiththesettingssavedin[User1]to[User3] under[Export].

ResetAllSettings OK Cancel

Returnsallsettingstofactorydefault.Whenselected,themessage[Reset allsettingstofactorydefaults?]appears.

[OK]:Performsreset. [Cancel]:Returnstothepreviousscreenwithoutresetting.

OSD Menu

91

1 Thefollowingsettingscannotbeexportedorimported.

Adjustment TargetvaluesofCDL/UserLUTBypassandCalibration(includingcalibrationresults)

Display Settings ZoomPreset,FrameHold

Function Settings TestPattern

Picture Function Settings Peaking(Enable),FalseColor(Enable),RangeCheck(Enable),2020OutsideofGamutView(Enable),

Monochrome,BlueOnly,RedOff,GreenOff,BlueOff,CompareView(Enable)

Network/IMD Settings LAN,Wi-Fi,DisplaySettingLink

(LANandWi-Fi:onlyexport/importvianetwork)

System Settings Date/Time,FanStop,Export/Import,PoweronSetting

UserLUTdatacannotbeexportedorimportedto[User1]to[User3]under[Target].

Dataexportedfromthisproductmaynotbeimportedtoproductsofwhichfirmwareversionisearlierthantheversionofthisproduct.Toimport

data,updatethefirmwaretothelatestversion.

OSD Menu

92

Function to allow registration for the display F buttons ( 86)

Item Options Item Options

Adjustment PictureMode ChannelSettings ChannelUP1

Contrast ChannelDOWN1

Brightness SelectInputSignal

Chroma AudioInput

ChromaUp SingleInputDualView

Sharpness CH1toCH20

BacklightControl DisplaySettings ScreenScaling

Gamma/EOTF Anamorphic

HDR ScalingMethod

HDRRange ZoomPreset

PeakLuminanceControl Zoom1

BoostContrast Zoom2

HDR/SDRView Zoom3

Gain FrameHold

Bias BackgroundColor

xy

PictureMode SMPTE-C AudioSettings SDIGroup

EBU CHL

ITU-RBT.709 CHR

ITU-RBT.2020 Volume

AdobeRGB AudioSwitch

DCI-P3 MarkerSettings2 MarkerPreset

User1(2020PQ) Marker1

User2(2020HLG) Marker2

User3(DCIPQ) Marker3

User4(DCIPQD65) Marker4

User5~User7 Marker5

CINEMAEOSSYSTEM AspectMarker

ACESproxy(ver.1.0.1) SafetyZoneMarker1

CDL/UserLUT CDL/UserLUT SafetyZoneMarker2

CDLRGB AreaMarker1

CDLR CenterMarker

CDLG GridMarker

CDLB

CDLSOP/SAT

CDLSlope

CDLOffset

CDLPower

CDLSaturation

CDL/UserLUTBypass

CDLExport/Import

OSD Menu

93

Item Options

FunctionSettings TC/ALM

TimeCode

AudioLevelMeter

WFM/VEC

WaveFormMonitor

WFMSelectSignal

VectorScope

Histogram/FrameLuminance

Histogram

FrameLuminanceMonitor

PixelValueCheck

SignalMonitoringLog

Capture

CameraInformation

PictureFunctionSettings Peaking

Peaking1

Peaking2

FalseColor

FalseColor1

FalseColor2

RangeCheck

RangeCheck1

RangeCheck2

2020OutsideofGamutView

Monochrome

BlueOnly

RedOff

GreenOff

BlueOff

BacklightScan

CompareView

SystemSettings SignalInformation

HideOSD3

FanStop

1 Whenchangingchannelswith[ChannelUP/DOWN],thechannelswith[InputConfiguration]( 48)setto[]areskipped. 2 WhenanymarkersettingsarechangedusinganFbutton,thosechangeswillbeappliedto[Enable]underthecurrentlyselected[MarkerPreset]. 3 [HideOSD]isafunctiontohideallOSD.When[On]isselected,OSD,[Separator]and[BackgroundColor]arehiddenbutthemenucanbeused.

OSD Menu

94

Signal Information Showsthesignalinformation.When[SelectInputSignal]is[QuadInput],informationfortheentiresignalandeach inputisdisplayed.Selectasignalwiththejogdialaccordingtotheguideattoprightcornerofthemenu.Whensignal informationhasbeenobtainedalthoughitisnotdisplayedonthescreen,thecontentoftheinformationisgrayedout.

SDI Signal HDMI Signal

Item Display Example Item Display Example

Channel InputConfiguration SelectInputSignal ImageDivision Format Resolution PictureRate,I/P/PsF* SDIPayloadID VideoStandard SamplingStructure,BitDepth PictureRate ScanningMethod

LinkNumber Colorimetry TransferCharacteristics

CH1 12-3G/HD-SDI(3G-A) QuadInput Automatic Automatic 4096x2160 24.00P 89C34601 3G-SDI 4:4:4:4GBRA10-bit 24.00 Progressive/Progressive (Transport/Picture) Single/Link_1 UHD SDR-TV

Channel InputConfiguration Format Resolution PictureRate,I/P/PsF PixelEncoding,ColorDepth Matrix Range EOTF MaxLuminance(Peak/Avg.) DisplayLuminance(Max/Min) WhitePoint PrimaryColorRed PrimaryColorGreen PrimaryColorBlue

CH4 HDMI Automatic 4096x2160 60.00P 4:2:2YCbCr10-bit ITU-RBT.709 Full SMPTEST2084(PQ) 1000/500cd/m2

1000-0.005cd/m2

x=0.313,y=0.329 x=0.640,y=0.330 x=0.300,y=0.600 x=0.150,y=0.060

*Whencontentisgrayedout,anasterisk[*]maybedisplayedindicatinglow[PictureRate]accuracysuchas[24.00P*].

System Information Showsthevideodisplaystatusandnetworkinformation.

Item Display Example

Display DP-V3120

SerialNo. 000000000000

Firmware/LicenseVer. 1.1

UsageTime* 5h

IPAddress 192.168.0.1

SubnetMask 255.255.255.0

MACAddress FF:FF:FF:FF:FF:FF

Wi-FiIPAddress 192.168.0.1

Wi-FiSubnetMask 255.255.255.0

*The[UsageTime]isnotalways[0]whenyoupurchasethedisplayduetofactoryinspection.

95

SupportedSignalFormat

SDI *: Formatsnotsupportingaudiosignals.

**: Formatssupportingaudiosignals.

Transmission method Signal format Color format Color depth Standards

SD-SDI 720x487i59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE-259M

720x576i50.00Hz*

HD-SDI 1280x720P59.94/60.00Hz** 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE2961280x720P50.00Hz**

1280x720P29.97/30.00Hz

1280x720P25.00Hz**

1280x720P23.98/24.00Hz**

1920x1080i59.94/60.00Hz** SMPTE292-1 SMPTE274M1920x1080i50.00Hz**

1920x1080P29.97/30.00Hz**

1920x1080PsF29.97/30.00Hz**

1920x1080P25.00Hz**

1920x1080PsF25.00Hz**

1920x1080P23.98/24.00Hz**

1920x1080PsF23.98/24.00Hz**

2048x1080i59.94/60.00Hz

2048x1080i50.00Hz

2048x1080P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080PsF29.97/30.00Hz

2048x1080P25.00Hz

2048x1080PsF25.00Hz

2048x1080P23.98/24.00Hz

2048x1080PsF23.98/24.00Hz

3G-SDI (LevelA)

1280x720P59.94/60.00Hz** 4:4:4RGB 4:4:4YCbCr

10-bit SMPTE425-1 SMPTE296

1280x720P50.00Hz** 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P25.00Hz** 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P23.98/24.00Hz** 4:4:4RGB 4:4:4YCbCr

10-bit

1920x1080P59.94/60.00Hz** 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE274M

Supported Signal Format

96

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelA)

1920x1080i59.94/60.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit SMPTE425-1 SMPTE274M

4:2:2YCbCr 12-bit

1920x1080P50.00Hz** 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB** 10-bit

12-bit

4:4:4YCbCr** 12-bit

4:4:4YCbCr** 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB** 10-bit

12-bit

4:4:4YCbCr** 12-bit

4:4:4YCbCr** 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

1920x1080P23.98/24.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 12-bit

4:2:2YCbCr

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

Supported Signal Format

97

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelA)

2048x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 12-bit

4:2:2YCbCr

2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

Supported Signal Format

98

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M1920x1080i59.94/60.00Hz 4:4:4RGB

4:4:4YCbCr 12-bit/10-bit

4:2:2YCbCr** 12-bit

1920x1080P50.00Hz 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr** 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

2048x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

Supported Signal Format

99

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

Supported Signal Format

100

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

DualLink3G-SDI (LevelA)

1920x1080P59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-3 SMPTE274M

4:2:2YCbCr 12-bit

1920x1080P50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-3 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

2048x1080P50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

2048x1080P47.95/48.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

DualLink3G-SDI (LevelB)

1920x1080P59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-3 SMPTE372 SMPTE274M4:2:2YCbCr 12-bit

1920x1080P50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-3 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

2048x1080P50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

2048x1080P47.95/48.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

Supported Signal Format

101

Transmission method Signal format Color format Color depth Standards

DualLink3G-SDI SquareDivision (LevelB)

3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE425-3 SMPTE372 SMPTE274M

3840x2160PsF29.97/30.00Hz

3840x2160P25.00Hz

3840x2160PsF25.00Hz

3840x2160P23.98/24.00Hz

3840x2160PsF23.98/24.00Hz

4096x2160P29.97/30.00Hz SMPTE425-3 SMPTE372 SMPTE2048-2

4096x2160PsF29.97/30.00Hz

4096x2160P25.00Hz

4096x2160PsF25.00Hz

4096x2160P23.98/24.00Hz

4096x2160PsF23.98/24.00Hz

DualLink3G-SDI 2SampleInterleave (LevelB)

3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE425-3 SMPTE372 SMPTE274M

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P29.97/30.00Hz SMPTE425-3 SMPTE372 SMPTE2048-2

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

QuadLinkHD-SDI 3840x2160i59.94/60.00Hz** 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE274M3840x2160i50.00Hz**

3840x2160P29.97/30.00Hz**

3840x2160PsF29.97/30.00Hz**

3840x2160P25.00Hz**

3840x2160PsF25.00Hz**

3840x2160P23.98/24.00Hz**

3840x2160PsF23.98/24.00Hz**

4096x2160i59.94/60.00Hz

4096x2160i50.00Hz

4096x2160P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160PsF29.97/30.00Hz

4096x2160P25.00Hz

4096x2160PsF25.00Hz

4096x2160P23.98/24.00Hz

4096x2160PsF23.98/24.00Hz

Supported Signal Format

102

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelA)

3840x2160P59.94/60.00Hz** 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P50.00Hz** 4:2:2YCbCr 12-bit

3840x2160i50.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF29.97/30.00Hz 4:4:4RGB** 10-bit

12-bit

4:4:4YCbCr** 12-bit

4:4:4YCbCr** 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB** 10-bit

12-bit

4:4:4YCbCr** 12-bit

4:4:4YCbCr** 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

Supported Signal Format

103

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelA)

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

4096x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

Supported Signal Format

104

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI 2SampleInterleave (LevelA)

3840x2160P59.94/60.00Hz** 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE274M3840x2160P50.00Hz** 4:2:2YCbCr 10-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB** 4:4:4YCbCr**

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160P50.00Hz 4:2:2YCbCr 10-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit

4096x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

QuadLink3G-SDI (LevelB)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr** 12-bit

3840x2160P50.00Hz 4:2:2YCbCr 10-bit

Supported Signal Format

105

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

3840x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE274M4:2:2YCbCr** 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4096x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

Supported Signal Format

106

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

Supported Signal Format

107

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

QuadLink3G-SDI 2SampleInterleave (LevelB)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE274M

3840x2160P50.00Hz 4:2:2YCbCr 10-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160P50.00Hz 4:2:2YCbCr 10-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit

4096x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

6G-SDI

3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE2081-10

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

Supported Signal Format

108

Transmission method Signal format Color format Color depth Standards

DualLink6G-SDI SquareDivision, 2SampleInterleave

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE2081-11

3840x2160P50.00Hz

12G-SDI

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE2082-10

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit

3840x2160P50.00Hz

4096x2160P47.95/48.00Hz

4096x2160P59.94/60.00Hz

4096x2160P50.00Hz

Supported Signal Format

109

RAW

Signal format

3840x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz

4096x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz

HDMI

Signal format Color format/Color depth

640x480P59.94/60.00Hz 4:4:4RGB8-bit

800x600P60.00Hz

1024x768P60.00Hz

720x480P59.94/60.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

720x576P50.00Hz

1280x720P59.94/60.00Hz

1280x720P50.00Hz

1920x1080P59.94/60.00Hz

1920x1080i59.94/60.00Hz

1920x1080P50.00Hz

1920x1080i50.00Hz

1920x1080P29.97/30.00Hz

1920x1080P25.00Hz

1920x1080P23.98/24.00Hz

2048x1080P59.94/60.00Hz

2048x1080P50.00Hz

2048x1080P29.97/30.00Hz

2048x1080P25.00Hz

2048x1080P23.98/24.00Hz

3840x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit

3840x2160P50.00Hz

3840x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit

4096x2160P50.00Hz

4096x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

110

Image/FrameDisplay

SDI

Signal system Display Method

720x487 59.94/60.00 i 59.94/60.00 P

720x576 50.00 i 50.00 P

1280x720 23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

1920x1080 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

2048x1080 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

Image/Frame Display

111

Signal system Display Method

3840x2160 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

4096x2160 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

*:Displayingsameframe

Image/Frame Display

112

HDMI

Signal system Display Method

640x480 59.94/60.00 P 59.94/60.00 P

800x600 60.00 P 60.00 P

720x480 59.94/60.00 P 59.94/60.00 P

720x576 50.00 P 50.00 P

1024x768 60.00 P 60.00 P

1280x720 59.94/60.00 P 59.94/60.00 P

1280x720 50.00 P 50.00 P

1920x1080 59.94/60.00 P 59.94/60.00 P

1920x1080 59.94/60.00 i 59.94/60.00 P

1920x1080 50.00 P 50.00 P

1920x1080 50.00 i 50.00 P

1920x1080 29.97/30.00 P 59.94/60.00 P*

1920x1080 25.00 P 50.00 P*

1920x1080 23.98/24.00 P 47.96/48.00 P*

2048x1080 59.94/60.00 P 59.94/60.00 P

2048x1080 50.00 P 50.00 P

2048x1080 29.97/30.00 P 59.94/60.00 P*

2048x1080 25.00 P 50.00 P*

2048x1080 23.98/24.00 P 47.96/48.00 P*

3840x2160 59.94/60.00 P 59.94/60.00 P

3840x2160 50.00 P 50.00 P

3840x2160 29.97/30.00 P 59.94/60.00 P*

3840x2160 25.00 P 50.00 P*

3840x2160 23.98/24.00 P 47.96/48.00 P*

4096x2160 59.94/60.00 P 59.94/60.00 P

4096x2160 50.00 P 50.00 P

4096x2160 29.97/30.00 P 59.94/60.00 P*

4096x2160 25.00 P 50.00 P*

4096x2160 23.98/24.00 P 47.96/48.00 P*

*:Displayingsameframe

113

ErrorMessages

Message Description and Action

Calibration Failedtoinitializetheexternalsensor. SeeCA-310andCA-210instructionmanual.

Calibrationerror. Checktheinstallationandconnectionofthe externalsensorandretry( 10).

PerformmatrixcalibrationofCA-310andCA-210 ( 10).

Calibrationiscompleted. (Brightnesssettingislowerthantargetbrightness.)

Setthe[Luminance]incalibrationagain( 37).

Failedtodetecttheexternalsensor. Pleasechecktheconnectionwiththesensor.

CorrectlyconnecttheexternalsensortotheUSB portofthismainunit.

Network Communicationerror. IPaddressmaybeinconflictortheremaybea networkcommunicationerror.Checkthenetwork environment.

InvalidIPAddress. EnterthecorrectIPaddress.

InvalidSubnetMask. Enterthecorrectsubnetmask.

Displayisnotconnected. CheckthattheCanondisplaytowhichyouwishto exportthisvideodisplay'ssettingsandthisvideo displayarecorrectlyconnectedwithaLANcable.

Varioussettings, CDLexport

TheUSBmemoryisfull. UseanotherUSBmemoryordeletethecontentof thememory.

Failedtowritefile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

LUT,Varioussettings, CDLimport

(LUTImport)"LUTType"isdifferent. (CDLImport)"FileType"isdifferent.

Selectthecorrectfileformat.

Failedtoreadfile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

Failedtoimport. Thereisanerrorinthefiletobeimported.Checkthe file.

Noimportfile. Checkandensurethatthefilehasbeensavedtothe USBmemoryorimportedto[User1]to[User3].

Error Messages

114

Message Description and Action

ScreenCapture Failedtocapture. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

InvalidSignal. Ascreendisplayingnovideoisbeingcapturedfor examplethereisnosignaloranunsupportedsignal isbeinginput.Checkthesignal,inputitagain,and captureit.

Copyprotectedsignal. Thesignalyoutriedtocapturemaybeprotectedby HDCP2.2whichisacopypreventionstandardfor HDMI.Inthiscase,thesignalcannotbecaptured. ChecktheHDMIsignal.

Failedtoplaybackfile. TheUSBmemoryorthefilemaybedefectiveor protected.ChecktheUSBmemoryorthefile.

Nocapturefile. Checkandensurethatthefilehasbeensavedtothe USBmemory.

Hardwareerror Backlighterror. Disconnectthepowercord,reconnectit,andthen turnonthepower. Ifthemessagepersists,contactCanonCustomer Center.

Fanerror.

Panelerror.

I/Ferror.

Systemerror.

Invalidoperationduetohightemperature. Thetemperatureinsidethemainunitishigh.Turnoff thepowerandwaituntilthefanstops.

Inputsignal NoSignal Displayedwhenthereisnovideosignalinput.

Unsupported Unsupportedvideosignalisinput.Checkthe supportedsignalformat( 95).

Operation Invalidoperation. Operationisdisabled.Checkthesettingitems.

"ProtectSettings"ison. TousetheOSDmenu,movetheselectionframe to[Protect]andpressthejogdialforapproximately 3seconds.

"CDL/UserLUTBypass"ison. When[CDL/UserLUT] [Bypass]isturned[On], youcannotadjust[Power],[Saturation],[Offset],or [Slope].

InvalidPassword. Enterthecorrectpassword.

Nolicense. Thisfunctioncannotbeusedasthelicensefilehas notbeenapplied.RefertotheCanonwebsitefor detailedinformation.

USBmemory USBmemoryisnotconnected. CorrectlyconnecttheUSBmemorytotheUSBport ofthismainunit.

UnsupportedUSBmemory. ChecktheUSBmemoryformatandmakesureitis notprotected.

Error Messages

115

Message Description and Action

Wi-Fiadapter Wi-FiAdaptorisnotconnected. CorrectlyconnecttheWi-FiadaptertotheUSB terminalofthevideodisplay.

FailedtoconnectWi-FiAccessPoint. Thepasswordmaybewrong,ortheremaybea networkcommunicationerror.Checkthenetwork environment.

FirmwareUpdate Noupdatefile. FirmwareupdatefilesarenotsavedonUSBmemory orothermedia.

Failedtoreadupdatefile. Thereisanerrorinthefile.Checkthefile.

Thefirmware/licensehasbeenalreadyupdated. Thisisthefilethatisupdatedonthevideodisplay.

DCpowersupply

LowVoltage. Thebatterychargeleveldropsifusingthebattery. Ifyouuseanotherpowersource,checktheinput voltageoftheDCpowersupply.

LowVoltage,Turnoffpower. ThepowerhasshutoffasDCpowervoltage becameinsufficientforcontinuedoperation. Theremaynotbeenoughenergyleftifyouareusing thebattery.Connectachargedbatteryandturnthe videodisplaypoweron. Ifyouuseanotherpowersource,checktheinput voltageoftheDCpowersupply.

InvalidVoltage,Turnoffpower. ThepowerhasshutoffastheDCpowerinput voltageexceededtheoperationalthreshold.Check theinputvoltageoftheDCpowersupply.

DCpowersupply LowVoltage. IndicatesthattheinputvoltageoftheDCpower

supplyhasbecomebelowapprox.22.5V.Checkthe voltageoftheDCpowersupply.

LowVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpower supplyhasbecomebelowapprox.21.0Vandthe powerwillbeturnedoff.Connecta23.5Vorhigher DCpowersupplyandpressthe buttontoturnon thepower.

InvalidVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpower supplyhasreachedapprox.35.8Vorhigher.Check theinputvoltageoftheDCpowersupply.

PowerSaving NoSignal,TurnoffpowerbyPowerSavefunction. This indicatesthat therehavenotbeenanysignals forapproximately30minutes.Thepowerwill be turnedoffapproximately5minutes later.Checkthe inputsignal.

NoSignal,Turnoffpower. This indicates therehasbeennosignalwhichwill resultinpowerbeingturnedofftothevideodisplay. Checktheinputsignal.

116

Troubleshooting

Symptom Cause and Action

Powerdoesnotturnon. (Powerindicatordoesnotturnon.)

Pressthe button.

Checkthatthepowercordisconnectedcorrectly.

Brightnessofthepowerindicatormaybeturnedoff.Turnitonand checkoncemore.

88

Thescreenisdark. Whenthepowerindicatordoesnotturnon: Pressthe button.

Checkthatthepowercordisconnectedcorrectly.

Whenthepowerindicatorislitorange: Pressthe button.

Whenthepowerindicatorisflashingorange: Flashingonceevery3seconds: ContactCanonCustomerCenter.

Flashingtwiceevery3seconds: -Turnonthepowerwiththe button. -Thetemperatureofthedisplayrises(orfalls)dependonoperation environment.Checktheenvironmentalconditionsanddonotusein directsunlight. -Ifthepowerstilldoesnotturnon,contactCanonCustomerCenter.

Thepowerwasturnedoffwhenthere werenotanysignals.

When[PowerSave]issetto[On],thevideodisplay'spowerisautomatically turnedoffifnovideosignalisinputforacertainperiodoftime.Turnonthe poweragain.

ThepowersuddenlygoesoffwhenaDC powersupplyisused.

DependingonthemodelofDCpowersupply used,theoutputvoltagemaydecreasesuddenlyandeventurnoff (0Voutput)whenathresholdvalueisreached.Beforethat,awarning messageaboutlowinputvoltagemaybedisplayedonlybrieflyornotat all.ConnectachargedDCpowersupplyorACpowersupply.

SomeDCpowersupplyunitsturnoffthevoltagewhena thresholdvalueisreached.Inthiscase,themessageindicatinglow voltageisnotdisplayed.ConnectachargedDCpowersupplyorAC powersupply.

Theimagedoesnotdisplay. Seteachitemin[ChannelSettings]accordingtoinputsignal. 48

The3G-SDIRAWsignalimagedoesnot display.

Attimesthe3G-SDIRAWsignalimagemaynotdisplay,dependingon thetypeoftheCinemaEOScamera.RefertotheCanonwebsitefora listofsupportedproducts.

Troubleshooting

117

Symptom Cause and Action

ThereisablankareawhensettoQuad Input/DualInput.

Theremaybenoinputsignal.Checkthesignal.

Somecombinationsarenotsupported.Checkthesignal.

Theremaybenoinputsignal.Lookatthedisplayareaiconinthe interfaceareaandcheckthattheinputareaandsignalcablesare properlyconnected.

Somecombinationsarenotsupported.Checkthesignal.

Theremaybenoinputsignal.Viewthedisplayareaiconintheinterface areaandcheckthattheinputareaandsignalcablesareproperly connected.

Signalswithdifferentresolutionorfrequencymaybeinputfromeach terminal.Checkthesignal.

Theremaybenoinputsignal.Checkthesignal.

Signalswithdifferentresolutionorfrequencymaybeinputfromeach terminal.Checkthesignal.

49 94

Theimageappearstobedelayed.

When[ReduceBacklightFlash]issetto[On],thedisplayedimagemay bedelayeddependingonthescene.Insuchcase,changethesettingto [Off].

89

Videopausedtemporarily Thescreenmaypausewhenrunning[Capture]viaawebbrowser.When [Capture]iscomplete,orturning[Web] [Control]to[Off]willreturnto normalscreen.

23

84

Screenistoobright/dark. Adjustthe[Contrast]ontheOSDmenu.

Adjustthesettingsfor[BoostContrast]ontheOSDmenu.

Adjustthesettingsfor[BoostContrast]onthe OSDmenu.

ThereisalimitontheservicelifeofLCDbacklight.Ifthescreen becomesdarkorstartsflickering,contactCanonCustomerCenter.

26

35

35

Burn-inimageappears. ThisisacharacteristicoftheLCDpanelandyoushouldavoiddisplaying stationaryimageforalongtime.

Thereisanunlitorred,blue,green,or whitedotonscreen.

LCDdisplayismadeofveryhighprecisiontechnology.Ithaseffective pixelsof99.99%ormore,buttheremaybeblackdotsorred,blue,or greendotsthatmaybealwayson.Thisisnotafailure.

Thereisaninterferencepatternortrace thatremainswhentheLCDpanelis pressed.

Thesymptommayberesolvedbydisplayingawhiteorblackimageon theentirescreen.

OSDmenucannotbeused. Checkthat[ProtectSettings]isnotset. 87

Troubleshooting

118

Symptom Cause and Action

TheFbuttononthemainunitisflashing.

When[PeakLuminanceControl]issetto[On],theFbuttonassigned withthisfunctionflasheswhendisplayluminanceisrestricted.

When[PeakLuminanceControl]isassignedtotwoormoreFbuttons, oneofthebuttonsflashes.

34

[AspectMarker],[SafetyZoneMarker]or [AreaMarker]doesnotappear.

Achannelwithnosignal,unsupportedsignal,orwith[Input Configuration]notsetmaybeselected.Checkthesignal.

94

Thefanstartstorotateevenwhen[Fan] under[CameraLink]issetto[On]or[Fan Stop]issetto[On].

Thefanstaysoffforapprox.1minutewhenanACpowersupplyisused. Tokeepthefanoffforalongerperiod,useaDCpowersupply.

Thefanoperatestolowerthetemperatureinside themainunit.Thefanstopsoperatingwhenthetemperatureinsidehas lowered.

When[Fan]under[CameraLink]issetto[On],thedowntimemaynot matchthecamera.

75

88

Thefandoesnotstopevenwhen[Fan] under[CameraLink]issetto[On]or[Fan Stop]issetto[On].

Thefandoesnotstopifthetemperatureinsidethemainunitishigh. Configuresettingsaftertheinternaltemperaturehaslowered.

Thefanmaynotstopinsomeconditions,forexamplewhenusedata hightemperature.Usethevideodisplayattheoperatingtemperatureor lower.

75

88

Loudfannoise Thefanoperatesata fasterspeedthanusualtolowertheinternaltemperatureif[FanControl] issetto[On]andwhenthetemperatureinsidethemainunithas increased.Thefanoperatesatnormalspeedwhen[FanControl]isset to[Off].

Whenhigh-luminancecontentisdisplayedcontinuously,thetemperature insidethemainunitriseseveniftheoperatingtemperatureiswithin therecommendedrange,andthefanoperatesatafasterspeedthan usualtolowertheinternaltemperature.Itisrecommendedtolowerthe brightnessofthevideodisplay.

88

Youforgotthepasswordfor[Protect Settings].

Pressthejogdialandthe buttonwhilethevideodisplayisinstandby. Theconfigurationwillberesettothestatewherenopasswordisset.

Thevideodisplaydoesnotstartupinthe conditionthatthepowerwasturnedoff lasttime.

Checkthe[PoweronSetting]ontheOSDmenu.Set[Lastmemory]to startupthevideodisplayintheconditionthatthepoweristurnedofflast time.

90

TheimagequalityfortheUsermodein [PictureMode]differsfromtheimage qualityofpresets.

Selectthepresetmodeby[CopyPictureMode]andcopythesettings. 38

Imagequalityontheleftandrightscreens isdifferent.

Checkthe[ChannelSettings] [PictureMode]settings. 8

51

Imagequalityisautomaticallychanged.

Thesameimageisdisplayedintwo screens.

Checkthe[ChannelSettings] [SingleInputDualView]settings. 52

119

SoftwareUsedinThisProduct

SoftwareinstalledwiththisproductincludessoftwaremodulesfromCanonorthirdparties.

Software Developed by Canon and Free Software

SoftwaredevelopedorcreatedbyCanonandaccompanyingdocumentisprotectedbycopyrightlaw,termsofan internationalconventionandanyothergoverninglaws. Thisproductusessoftwaremodulesundercopyrightbythirdpartiesanddistributedasfreesoftware.Someofthese softwaremodulesaresubjecttotheGNUGeneralPublicLicensev2(GPL),GNULesserGeneralPublicLicensev2.1 (LGPL)oranyotherlicense.

Free software modules installed with this product

linuxkernel busybox glibc JFFS2 SquashFS FUSE libfuse libupnp avahi-autoipd libxml zlib libpng Newlib(libc) Newlib(libm) wireless_tools wpa_supplicant openssl libnl RealTek_WiFi_linuxdriver dhcpd hostapd gzip

Acquiring Source Code for Free Software

Somefreesoftwarerequirestheacquirementofthesourcecodeofmodulesinordertodistributetheexecutableform ofthosesoftwaremodules.Forinformationonhowtoacquirethesourcecodeforfreesoftwaresuchastheseand confirmingtermsoftheGPL,LGPLandotherlicenseagreements,pleasecheckwiththedistributorfromwhomthe productwaspurchased.

License Agreement for this Product

Obligation to Present License Agreement

Thecopyrightholdersofsoftwaremodulesinstalledwiththisproductrequireitslicenseagreementtobedisplayed. Thislicenseagreementisasfollows:

libupnp License

Copyright(c)2000-2003IntelCorporationAllrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:

* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

* NeithernameofIntelCorporationnorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts derivedfromthissoftwarewithoutspecificpriorwrittenpermission.

THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANYEXPRESS ORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLINTELORCONTRIBUTORS BELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES (INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE, DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,

Software Used in This Product

120

WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGIN ANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

libxml License

Copyright(C)1998-2003DanielVeillard.AllRightsReserved.

Permissionisherebygranted,freeofcharge,toanypersonobtainingacopyofthissoftwareandassociated documentationfiles(the"Software"),todealintheSoftwarewithoutrestriction,includingwithoutlimitationtherightsto use,copy,modify,merge,publish,distribute,sublicense,and/orsellcopiesoftheSoftware,andtopermitpersonsto whomtheSoftwareisfurnishedtodoso,subjecttothefollowingconditions:

Theabovecopyrightnoticeandthispermissionnoticeshallbeincludedinallcopiesorsubstantialportionsofthe Software.

THESOFTWAREISPROVIDED"ASIS",WITHOUTWARRANTYOFANYKIND,EXPRESSORIMPLIED,INCLUDING BUTNOTLIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEAND NONINFRINGEMENT.INNOEVENTSHALLTHEDANIELVEILLARDBELIABLEFORANYCLAIM,DAMAGESOR OTHERLIABILITY,WHETHERINANACTIONOFCONTRACT,TORTOROTHERWISE,ARISINGFROM,OUTOFOR INCONNECTIONWITHTHESOFTWAREORTHEUSEOROTHERDEALINGSINTHESOFTWARE.

Exceptascontainedinthisnotice,thenameofDanielVeillardshallnotbeusedinadvertisingorotherwisetopromote thesale,useorotherdealingsinthisSoftwarewithoutpriorwrittenauthorizationfromhim.

Newlib(libc) License

Copyright(c)1990TheRegentsoftheUniversityofCalifornia.Allrightsreserved.

Redistributionanduseinsourceandbinaryformsarepermittedprovidedthattheabovecopyrightnoticeandthis paragraphareduplicatedinallsuchformsandthatanydocumentation,andothermaterialsrelatedtosuchdistribution anduseacknowledgethatthesoftwarewasdevelopedbytheUniversityofCalifornia,Berkeley.Thenameofthe Universitymaynotbeusedtoendorseorpromoteproductsderivedfromthissoftwarewithoutspecificpriorwritten permission.

THISSOFTWAREISPROVIDED"ASIS"ANDWITHOUTANYEXPRESSORIMPLIEDWARRANTIES,INCLUDING, WITHOUTLIMITATION,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULAR PURPOSE.

Copyright(c)1991,2000TheRegentsoftheUniversityofCalifornia.Allrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement: ThisproductincludessoftwaredevelopedbytheUniversityofCalifornia,Berkeleyanditscontributors. 4.NeitherthenameoftheUniversitynorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts derivedfromthissoftwarewithoutspecificpriorwrittenpermission.

Software Used in This Product

121

THISSOFTWAREISPROVIDEDBYTHEREGENTSANDCONTRIBUTORS"ASIS"ANDANYEXPRESSOR IMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEREGENTS ORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE POSSIBILITYOFSUCHDAMAGE.

Newlib(libm) License

Copyright(C)1993bySunMicrosystems,Inc.Allrightsreserved.

DevelopedatSunPro,aSunMicrosystems,Inc.business. Permissiontouse,copy,modify,anddistributethissoftwareisfreelygranted,providedthatthisnoticeispreserved.

openssl

Copyright(C)1998-2017TheOpenSSLProject.Allrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgment: "ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit.(http://

www.openssl.org/)" 4.Thenames"OpenSSLToolkit"and"OpenSSLProject"mustnotbeusedtoendorseorpromoteproductsderived fromthissoftwarewithoutpriorwrittenpermission.Forwrittenpermission,pleasecontactopenssl-core@openssl. org.

5.Productsderivedfromthissoftwaremaynotbecalled"OpenSSL"normay"OpenSSL"appearintheirnames withoutpriorwrittenpermissionoftheOpenSSLProject.

6.Redistributionsofanyformwhatsoevermustretainthefollowingacknowledgment: "ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit(http://www.

openssl.org/)"

THISSOFTWAREISPROVIDEDBYTHEOpenSSLPROJECT"ASIS"ANDANYEXPRESSEDORIMPLIED WARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYAND FITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEOpenSSLPROJECT ORITSCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE POSSIBILITYOFSUCHDAMAGE.

Copyright(C)1995-1998EricYoung(eay@cryptsoft.com) Allrightsreserved.

Software Used in This Product

122

ThispackageisanSSLimplementationwrittenbyEricYoung(eay@cryptsoft.com). TheimplementationwaswrittensoastoconformwithNetscapesSSL.

Thislibraryisfreeforcommercialandnon-commercialuseaslongasthefollowingconditionsareahearedto.The followingconditionsapplytoallcodefoundinthisdistribution,beittheRC4,RSA,lhash,DES,etc.,code;notjustthe SSLcode.TheSSLdocumentationincludedwiththisdistributioniscoveredbythesamecopyrighttermsexceptthat theholderisTimHudson(tjh@cryptsoft.com).

CopyrightremainsEricYoung's,andassuchanyCopyrightnoticesinthecodearenottoberemoved.Ifthispackage isusedinaproduct,EricYoungshouldbegivenattributionastheauthorofthepartsofthelibraryused.Thiscanbe intheformofatextualmessageatprogramstartuporindocumentation(onlineortextual)providedwiththepackage.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretainthecopyrightnotice,thislistofconditionsandthefollowingdisclaimer. 2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement: "ThisproductincludescryptographicsoftwarewrittenbyEricYoung(eay@cryptsoft.com)"

Theword'cryptographic'canbeleftoutiftherouinesfromthelibrarybeingusedarenotcryptographicrelated:-). 4.IfyouincludeanyWindowsspecificcode(oraderivativethereof)fromtheappsdirectory(applicationcode)you mustincludeanacknowledgement:

"ThisproductincludessoftwarewrittenbyTimHudson(tjh@cryptsoft.com)"

THISSOFTWAREISPROVIDEDBYERICYOUNG"ASIS"ANDANYEXPRESSORIMPLIEDWARRANTIES, INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORA PARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEAUTHORORCONTRIBUTORSBELIABLE FORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING, BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,OR PROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERIN CONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUT OFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

Thelicenceanddistributiontermsforanypublicallyavailableversionorderivativeofthiscodecannotbechanged.i.e. thiscodecannotsimplybecopiedandputunderanotherdistributionlicence[includingtheGNUPublicLicence.]

wpa_supplicant, hostapd

Copyright(C)2002-2016,JouniMalinen andcontributors AllRightsReserved.

Thissoftwaremaybedistributed,used,andmodifiedunderthetermsofBSDlicense:

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:

1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

3.Neitherthename(s)oftheabove-listedcopyrightholder(s)northenamesofitscontributorsmaybeusedtoendorse orpromoteproductsderivedfromthissoftwarewithoutspecificpriorwrittenpermission.

Software Used in This Product

123

THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANY EXPRESSORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALL THECOPYRIGHTOWNERORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL, EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOF SUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION) HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT (INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVEN IFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

Copyright(c)2004-2014byInternetSystemsConsortium,Inc.("ISC") Copyright(c)1995-2003byInternetSoftwareConsortium

Permissiontouse,copy,modify,anddistributethissoftwareforany purposewithorwithoutfeeisherebygranted,providedthattheabove copyrightnoticeandthispermissionnoticeappearinallcopies.

THESOFTWAREISPROVIDED"ASIS"ANDISCDISCLAIMSALLWARRANTIES WITHREGARDTOTHISSOFTWAREINCLUDINGALLIMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESS.INNOEVENTSHALLISCBELIABLEFOR ANYSPECIAL,DIRECT,INDIRECT,ORCONSEQUENTIALDAMAGESORANYDAMAGES WHATSOEVERRESULTINGFROMLOSSOFUSE,DATAORPROFITS,WHETHERINAN ACTIONOFCONTRACT,NEGLIGENCEOROTHERTORTIOUSACTION,ARISINGOUT OFORINCONNECTIONWITHTHEUSEORPERFORMANCEOFTHISSOFTWARE.

InternetSystemsConsortium,Inc. 950CharterStreet RedwoodCity,CA94063 https://www.isc.org/

124

Index

Number 1D-LUT ..................................................................... 33

2 Sample Interleave ................................................... 49

3D-LUT ..................................................................... 33

200% (Screen Scaling) .............................................. 53

2020 Constant Luminance ........................................ 36

2020 Gamut Mapping ............................................... 37

2020 Outside of Gamut View ..................................... 81

A ACESproxy ................................................................ 26

Adjustment ................................................................ 26

Adobe RGB ............................................................... 26

Anamorphic ......................................................... 54, 74

Anchor Adjustment ................................................ 7, 39

Area Marker ............................................................... 61

Area Marker (Camera Link) ........................................ 74

Aspect Marker ........................................................... 58

Aspect (SD-SDI) ........................................................ 54

Audio Input ................................................................ 50

Audio Level Meter ...................................................... 65

Audio Settings ........................................................... 57

Automatic Adjustment

(CINEMA EOS/ARRI/VARICAM) ................................. 74

B Background Color ..................................................... 56

Backlight Control ................................................. 27, 89

Banner ...................................................................... 87

Bias R/G/B ................................................................ 27

Bicubic ...................................................................... 54

Blue Off ..................................................................... 81

Blue Only ................................................................... 81

Brightness ................................................................. 26

Button Name Lighting Time ....................................... 88

Bypass (CDL/User LUT) ....................................... 32, 34

C Calibration ........................................................... 10, 37

Camera Information ................................................... 75

Camera Link .............................................................. 74

Canon Log, CanonLog 2, Canon Log 3 ..................... 29

CDL Export/CDL Import ............................................ 13

CDL/User LUT ........................................................... 32

Center Marker ........................................................... 62

Channel Name ........................................................... 51

Channel Order ........................................................... 66

Channel Settings ....................................................... 48

Chroma ..................................................................... 26

Chromaticity Diagram ................................................ 72

CINEMA EOS SYSTEM (Picture Mode) ...................... 26

Color Gamut .............................................................. 28

Color Range .............................................................. 31

Color Range (User LUT) ............................................. 34

Color Temperature ..................................................... 27

Compare View ........................................................... 81

Compatible Settings .................................................. 89

Contrast .................................................................... 26

Copy Picture Mode .................................................... 38

Custom (xy) (Color Temperature) ................................ 27

D Date/Time ........................................................... 14, 86

DCI-P3 ...................................................................... 26

Detail Settings

Adjustment ............................................................ 34

CDL/User LUT ....................................................... 33

Display Button LED ................................................... 88

Display Channel ......................................................... 86

Display Function/Display Function (CDL) .................... 86

Display Name ............................................................ 87

Display Setting Link ................................................... 85

Display Settings ......................................................... 53

Dual Input .................................................................. 48

Dual Link 3G-SDI ....................................................... 49

E EBU ........................................................................... 26

Export/Import ...................................................... 13, 90

Export (Signal Monitoring) .......................................... 73

F False Color ................................................................ 79

Fan Settings .............................................................. 88

Film Cadence ............................................................ 56

Firmware/License Update .......................................... 90

125 Firmware/LicenseVer................................................. 94

Format....................................................................... 50

FrameHold............................................................... 55

FrameLuminanceMonitor......................................... 70

FunctionButtonGuide............................................... 87

Function/ChannelButton........................................... 86

FunctionSettings....................................................... 65

G GainR/G/B................................................................ 27

Gamma/EOTF........................................................... 29

GammaLUT.............................................................. 29

GamutLUT................................................................ 28

GreenOff................................................................... 81

GridMarker............................................................... 62

H HDMI............................................................... 109,112

HDMILink................................................................. 38

HDRRange............................................................... 30

HDR/SDRView......................................................... 37

HideOSD.................................................................. 93

Histogram.................................................................. 68

HLGSystemGamma................................................ 37

HybridLog-Gamma................................................... 29

I ImageDivision........................................................... 49

ImagePriority............................................................ 56

InMonitorDisplay...................................................... 85

InputConfiguration.................................................... 48

InputTransform......................................................... 31

InternalSync............................................................. 51

I/PConversion........................................................... 56

I/PsF.......................................................................... 56

ITU-RBT.709............................................................. 26

ITU-RBT.1886........................................................... 29

ITU-RBT.2020........................................................... 26

L Language.................................................................. 86

LAN(Network/IMDSettings)...................................... 84

LinkOrder................................................................. 49

LocalDimming.......................................................... 27

LTC........................................................................... 65

LUTImport.......................................................... 11,35

M MACAddress............................................................ 94

MarkerPreset............................................................ 58

MarkerSettings......................................................... 58

Marker/TC/CameraInfoInput..................................... 50

Monochrome............................................................. 81

MultiView(Dual/Quad).............................................. 49

N NativeInputResolution(ScreenScaling).................... 53

NearestNeighbor...................................................... 54

Network/IMDSettings............................................... 84

O Offset........................................................................ 32

OSDBrightness......................................................... 87

OSDMenu............................................................ 4,26

OSDPosition............................................................. 87

OSDSettings............................................................. 87

OSDSize................................................................... 87

OutputTransform...................................................... 31

OutputTransformSurround....................................... 31

OverRange............................................................... 80

P Password............................................................ 84,87

Peaking..................................................................... 79

PeakRange............................................................... 81

PictureFunctionSettings........................................... 79

PictureMode....................................................... 26,51

PixelValueCheck...................................................... 71

Power........................................................................ 32

PowerIndicatorBrightness........................................ 88

PowerIndicator/ButtonLEDSettings......................... 88

PoweronSetting....................................................... 90

PowerSave............................................................... 88

ProtectSettings......................................................... 87

PsF............................................................................ 56

Q QuadInput................................................................ 48

126 R RangeCheck............................................................ 80

RAW........................................................................ 109

RedOff...................................................................... 81

ReduceBacklightFlash............................................. 89

Remote(GPI).............................................................. 86

Reset......................................................................... 39

ResetAllSettings...................................................... 90

S SafetyZoneMarker................................................... 59

Saturation.................................................................. 32

ScalingMethod......................................................... 54

ScreenCapture......................................................... 73

ScreenScaling.......................................................... 53

SDI.................................................................... 95,110

SelectChannel.......................................................... 48

SelectInputSignal..................................................... 48

Separator.................................................................. 52

SerialNo.................................................................... 94

ShapeTrace.............................................................. 54

Sharpness................................................................. 26

SignalInformation...................................................... 94

SignalMonitoring....................................................... 72

SingleInput............................................................... 48

SingleInputDualView............................................... 52

Slope......................................................................... 32

SMPTE-C.................................................................. 26

SpeedPriority............................................................ 56

SquareDivision.......................................................... 49

SubnetMask............................................................. 84

SystemInformation.................................................... 94

SystemSettings........................................................ 86

T TestPattern............................................................... 72

TimeCode................................................................ 65

U UsageTime............................................................... 94

User17.................................................................... 26

UserLUT............................................................. 32,89

UserLUTPresetName.............................................. 34

V VectorScope............................................................. 68

VideoPosition(MultiView)......................................... 55

VITC.......................................................................... 65

W WaveFormMonitor................................................... 66

Web.................................................................... 23,84

Wi-Fi.................................................................... 21,84

Y YCbCrColorMatrix................................................... 36

Z Zoom........................................................................ 55

MIE-0024-000 CANONINC.2020

The information in this document is verified as of May 2020. Subject to change without notice. Visit your local Canon website to download the latest version.

USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support

(855) 4K-CANON (855-452-2666) (USA only)

UNITED KINGDOM Canon UK Ltd Unit 160, Centennial Park, Centennial Avenue, Elstree, Hertfordshire, WD6 3SG

020-7660-0186

Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amste

Manualsnet FAQs

If you want to find out how the DP-V2410 Canon works, you can view and download the Canon DP-V2410 Operation Guide on the Manualsnet website.

Yes, we have the Operation Guide for Canon DP-V2410 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation Guide should include all the details that are needed to use a Canon DP-V2410. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon DP-V2410 Operation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon DP-V2410 Operation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon DP-V2410 Operation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon DP-V2410 Operation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon DP-V2410 Operation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.