Contents

Canon DP-V3010 v2 Instruction Manual PDF

1 of 23
1 of 23

Summary of Content for Canon DP-V3010 v2 Instruction Manual PDF

Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.

Readingthisguidewillhelpyoulearntousethevideodisplayproperly.

Storethisguidesafelysothatyoucanuseitinthefuture. English

Video Display Setup Guide

2

Table of Content

Introduction 3 SuppliedAccessories 3 Conventionsusedinthismanual 3 Trademarks 3

Important Usage Instructions 4

Safety Instructions and Handling Precautions 5

Names and functions of parts 8

Setting Up 10 Carryingthevideodisplay 10 PreventingfromTipping 10 MountingtheMainUnitonaStandorWall 11 Removing/attachingthestand 12 Attaching/detachingtheACPowerCordClamp(provided) 13 ConnectingtheMainUnittoInputDevices 14 TurningontheMainUnit'spower 15 BasicoperationstousetheOSDmenu 15

Main specifications/Performance 16 Dimensions 18

About the User Manual for the Display

SetupGuide(thisdocument):Thisdescribestheitemsthatshouldbefollowedtoensurethedisplaycanbe usedcorrectlyandsafely,andhowtoinstallandoperatethedisplay.Pleasereadbeforeusingthedisplay.

OperationGuide(PDFelectronicmanual):Thisexplainsthefunctionsofthisdisplayandhowtosetitup. PleasedownloadthisfromtheCanonwebsite. https://www.usa.canon.com/internet/portal/us/home/support/ https://www.canon-europe.com/support/ https://www.canon.com.au/support https://sg.canon/en/support

3

E ng

lish

Introduction

ThankyouforpurchasingCanonVideoDisplay.Thisdeviceisacommercial-usedisplaycapableofsupportingawide rangeofworkflowsfromshooting,throughtoeditinginvideoproduction,forbothdigitalcinemaandbroadcasting.

Supplied Accessories Thefollowingitemsaresuppliedwiththisproduct.Pleasecheckbeforeusing.

ACPowerCord ACPowerCordclamp HC-01

SetupGuide (thisdocument)

Conventions used in this manual :Indicatesareferencepage. Note:Indicatesanote.

Reference:Indicatesreferenceinformation. CAUTION:Indicatesanitemyoumustobserve.

Trademarks HDMI,HDMIlogo,andHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI LicensingAdministrator,Inc.intheU.S.andothercountries.

VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother countries.

Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.

4

ImportantUsageInstructions

For the customers in the U.S.A. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15of theFCCRules. Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentis operatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergy and,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycauseharmfulinterferencetoradio communications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcase theuserwillberequiredtocorrecttheinterferenceathisownexpense.

Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedinthemanual.Ifsuchchanges ormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment. UseofshieldedcableisrequiredtocomplywithclassAlimitsinSubpartBofPart15ofFCCRules.

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterference thatmaycauseundesiredoperation.

CanonU.S.AInc. OneCanonPark,Melville,NY11747,U.S.A. TelNo.(631)330-5000

For the customers in Canada CANICES-3(A)/NMB-3(A)

For the customers in Europe Warning; ThisisaclassAproduct.Inadomesticenvironmentthisproductmaycauseradiointerferenceinwhichcasetheuser mayberequiredtotakeadequatemeasures.

CANONINC. 30-2,Shimomaruko3-chome,Ohta-ku,Tokyo146-8501,Japan

CANONEUROPAN.V. Bovenkerkerweg59,1185XBAmstelveen,TheNetherlands

OnlyforEuropeanUnionandEEA(Norway,IcelandandLiechtenstein) Thissymbolindicatesthatthisproductisnottobedisposedofwithyourhouseholdwaste, accordingtotheWEEEDirective(2012/19/EU)andnationallegislation.Thisproductshould behandedovertoadesignatedcollectionpoint,e.g.,onanauthorizedone-for-onebasis whenyoubuyanewsimilarproductortoanauthorizedcollectionsiteforrecyclingwaste electricalandelectronicequipment(EEE).Improperhandlingofthistypeofwastecouldhave apossiblenegativeimpactontheenvironmentandhumanhealthduetopotentiallyhazardous substancesthataregenerallyassociatedwithEEE.Atthesametime,yourcooperationinthe correctdisposalofthisproductwillcontributetotheeffectiveusageofnaturalresources.For moreinformationaboutwhereyoucandropoffyourwasteequipmentforrecycling,please contactyourlocalcityoffice,wasteauthority,approvedWEEEschemeoryourhouseholdwaste disposalservice.FormoreinformationregardingreturnandrecyclingofWEEEproducts,please visitwww.canon-europe.com/weee.

5

E ng

lish

SafetyInstructionsandHandlingPrecautions

Besuretoreadtheseinstructionsinordertooperate theproductsafely. Followtheseinstructionstopreventinjuryorharmtothe operatoroftheproductorothers.

WARNING Denotestheriskofseriousinjuryordeath.

Do not disassemble or modify the video display. Inside,thevideodisplaycontainshigh-voltage/extremely hot/movablepartsthatcancausefire,electricshock, burnsorinjury.

Do not insert foreign objects or liquids into the video display. Ifmetallicobjects,flammableobjectsorliquidsget insidethevideodisplay,thismaycausefire,electric shockormalfunction.

Be sure to use the correct voltage. Usingapowersourcewithavoltageotherthanthat specifiedinthisinstructionmanualcancausefireor electricshock. Alwaysusethesupplied(orspecified)ACpowercord. Foryoursafety,donotusethisACpowercordto powerotherequipment.

Do not use the video display in the following places. Doingsocancausefire,electricshockormalfunction. - Closetoawindowwhenitisrainingorsnowing. - Placessubjecttohighhumidityanddust. - Placesexposedtowaterandmoisturesuchas bathrooms,kitchensetc. - Placesdirectlyexposedtodust,smokeorsteam, ornearbyheatersandhumidifiers. - Placeswhereflammablegasesmaybepresent. - Placesexposedtodirectsunlight.

Do not install or store the video display in places exposed to direct sunlight. Thevideodisplay'sinternaltemperaturecanriseand causefireormalfunction.

Do not damage the power cord. Donotplaceheavyobjectsonthepowercordanddo notpull,modify,heatortiethepowercordinabundle. Thepowercordmaybedamaged(exposedorbroken wires,etc.)andcausefireorelectricshock.

When using three-pronged plugs with a ground connection: Alwaysconnectthegroundprong. Ashortcircuitoccurringwhenthegroundprongisnot connectedcancausefireorelectricshock. Thevideodisplay'spowercablefeaturesathree- prongedplug.

Do not touch the power cable or plug during lightning storms. Thiscancauseelectricshock.

Do not touch the power cable or plug with wet hands. Thiscancauseelectricshock.

Observe the following precautions regarding the power source and power plug. Failingtodosocancausefireorelectricshock. - Insertthepowerplugfullyandsecurelyintothe poweroutlet.Donotuseadamagedpowercable orplugoraloosepoweroutlet. - Holdtheplugitselfwhenunpluggingthepower cable.Pullingthepowercordcandamagethe powercordandcausefireorelectricshock. - Periodicallyremoveanydustbuildupfromthe powerplug. - Donotobstructtheaccesstothepowerplugby placingotherobjectsaroundit. - Donotconnectmanypowercordstothesame poweroutlet. - Whenusinganextensioncable,makesurethetotal powerconsumptionofthedevicesyouconnect totheextensioncabledoesnotexceeditsrated power.

If the video display was dropped or exposed to a strong impact, turn it off immediately and unplug the power plug. Thevideodisplayisaprecisioninstrumentand continueduseinsuchcasecanresultinashortcircuit andcausefireorelectricshock.

Before starting any maintenance work, turn off the video display and unplug the power plug. Failingtodosocancauseelectricshock.

In any case of unusual circumstances such as the presence of smoke or abnormal sounds or smell, immediately turn off the video display and unplug the power plug. Continuedusecancausefireorelectricshock.

Safety Instructions and Handling Precautions

6

Before moving, installing, removing or connecting the video display to peripheral devices, turn off the video display and all connected devices and unplug their power plugs. Failingtodosocancausefire,electricshockor malfunction.

For your safety, unplug the power plug from the power outlet when not using the video display for extended periods of time. Dustbuilduponthepowerplugcancausefire.

Do not obstruct the access to the power plug so it can always be easily unplugged. Failingtodisconnectthepowerplugimmediatelyafter unusualcircumstanceshaveoccurredcancausefireor electricshock.

Do not block the ventilation holes. Blockingthevideodisplay'sventholescanresultinthe internaltemperaturerisingandcausefireormalfunction. Observethefollowingprecautionstoensureproper ventilation. - Donotpushthevideodisplayintonarrowconfined spacesorenclosures. - Donotwrapthevideodisplayinclothorother materials. - Donotplacethevideodisplayfacingup,layit sidewaysorupside-down.

If the screen is damaged, do not touch the leaking liquid crystal or other internal liquids. IftheLCDpanelisdamagedandliquidcrystalorother internalliquidsleakout,donotputtheliquidsinthe mouth,inhaleorswallowitorletitcomeincontactwith theskin.Iftheliquidsgetintheeyeormouth,washit immediatelywithplentyofwater.Iftheliquidscomein contactwiththeskinorclothes,wipethemimmediately withalcoholetc.andwashtheexposedareawith soap.Leavingtheliquidsuntreatedcancauseinjuryor damage.

Use the carrying handle to carry the video display. Whencarryingthevideodisplay,besuretoholditby thecarryinghandle.Failuretodosocouldcausethe displaytofallandcauseaninjury.

Keep all packaging material out of the reach of children. Packagingmaterialtightlywrappedaroundsomeone's headcanresultinstrangulationorsuffocation.

CAUTION Denotestheriskofinjury.

Do not place any objects on the video display and do not climb on it. Thevideodisplaycantiporfallandcauseinjury.

Do not install the video display on an unstable surface. Installingthevideodisplayonawobblyorslanted surfacecancausethedisplaytotiporfallandcause injury.Thoroughlycheckalsothestrengthand sturdinessofthesurfacewherethevideodisplaywillbe placedorinstalled.

When unpacking, carrying, installing, or connecting the main unit, at least two people are required. Thevideodisplaycantiporfallandcauseinjury.

Take precautions to prevent the video display from tipping or falling. Inanearthquakethevideodisplaycantiporfall.For yoursafety,wheninstallingthevideodisplayonaTV standorotherfurniture,takeprecautionarymeasuresto securethevideodisplayagainsttippingorfalling.Taking suchmeasurescanbeeffectiveinreducingtheriskof injuryordamagebuttheeffectivenessoftheprevention measurescannotbeguaranteedinallearthquakes.

Follow the procedure in this manual to install the video display. Iftheinstallationisnotperformedcorrectly,thevideo displaymaytiltorfallandcauseinjury.

Inspect the condition of the installation about once per year. Aninadequatefittingormountingcancausethevideo displaytofallandcauseinjury.

When using headphones, set the volume at a safe level. Listeningthroughheadphonesatahighvolumecan harmyourhearing.

Do not look at the screen for long periods of time. Doingsocancauseconditionssuchaseyestrainor decreasedvision.Whenlookingatthescreenforlong periodsoftime,restperiodically.Ifyoufeeldiscomfort aftercontinuedusage,stopusingthevideodisplay immediatelyandrest.Ifyoucontinuetofeeldiscomfort, consultaphysician.

Safety Instructions and Handling Precautions

7

E ng

lish

When Using the Main Unit

Thescreenmaybedamagedifitisleftfacing strongsourceoflight.Pleasetakeprecautions whenplacingitnearawindow.

Donotpressfirmlyonthescreen,scratchitor placeanobjectonthescreen.Itcancausenon- uniformityordamagetothepanel.

Thescreenandcabinetmaybecomewarmduring use.Notethisdoesnotconstituteamalfunction.

Viewingthedisplayforprolongedperiodsoftime mayleadtoeyestrainordecreasedvision.Please ensuretotakerestperiodicallytoavoidthese symptoms.

RefertoRecommendationITU-RBT.1702 "Guidanceforthereductionofphotosensitive epilepticseizurescausedbytelevision"andrelated guidelines.

About Backlight

Thebacklighthasalimitedservicelifesoitsbrightness maydegradeandcolormaychangeduetoaging.

About Temporary Screen burn-in

Ifastationaryimageisdisplayedforaprolongedperiod, screenburn-inmayoccurwhereyouseeremnantsof whatwasdisplayed.ThisisacharacteristicofLCDand isnotafailure.However,thisisonlytemporaryandwill disappearwhenplayingvideo.

About the LCD screen

Thescreenisproducedusingextremelyhigh-precision manufacturingtechniques,withmorethan99.99%of thepixelsoperatingtospecification.Lessthan0.01%of thepixelsmayoccasionallymisfireorappearasblack, red,blueorgreendots.Inaddition,thistendencymay increasethroughlongtermuseduetocharacteristicof theLCDpanel.Thesedonotconstituteamalfunction.

Condensation

Ifthisequipmentisbroughtintoawarmroomwhileit iscoldoriftheroomisheatedsuddenly,condensation mayformonthesurfaceorinsidetheequipment.Note thattheequipmentmaybedamagedifitisusedunder suchcondition. Ifcondensationhasformedonthesurfaceorinside theequipment,donotusethevideodisplayasitmay getdamaged.Turnthepoweroffandwaituntilthe condensationhasevaporatedbeforeusingthevideo display.

Cleaning

Beforecleaning,besuretounplugthepowerplug.

Thescreenhasaspecialsurfacetreatment,avoid touchingitdirectlywithyourhand.Inaddition, neveraffixadhesiveobjectssuchasseals.

Neverusealcoholorbenzene,thinner,acidic cleaningsolution,alkalinecleaningsolution, abrasiveorchemicalwipesbecausethesewill damagethescreen.

Ifthescreenisdirty,wipegentlywithsoftdrycloth suchascleaningclothoreyeglassescleaning cloth.Wipingthescreentoohardmaycause unevennessonthescreenordamagetheLCD panel.Thescreenmaybescratchedifwipedtoo hardwithacleaningclothwithforeignparticles attached.

Whenthescreenisextremelydirty,wipewith softclothsuchascleaningclothoreyeglasses cleaningclothmoistenedwithwater-dilutedneutral detergent.

Useablowertoremovedustfromthesurfaceof thescreen.

Wipedirtoncabinetwithasoftcloth.Ifthescreen isverydirty,useamoistenedclothwithwater ormilddetergentdilutedwithwater.Donotuse alcohol,benzene,paintthinner,orpesticides astheymaydamagethesurfacefinishorerase charactersonthecabinet.

Disposing

Donotdisposetogetherwithnormalwaste.Donot includethevideodisplayinwastethatwillbetaken tolandfill.

Observetherulesandregulationsofyourlocal authoritieswhendisposing.

8

Namesandfunctionsofparts

Front face of the main unit

1 1

8 95432 6 7

1 Frontstand 2 Channel(CH)buttonCH1toCH3

Youcanswitchbetweentheregisteredchannels (settingsrelatedtoinputsignal)withasinglepush.

3 CDLbutton SwitchestoCDLmode.

4 Function(F)buttonF1toF8 Registeredfunctionsareexecutedwithasinglepush.

5 MENUbutton,jogdial,RESETbutton ChangestheOSDmenusettings.

6 (Power)button Turnsthepoweronandoff.

7 Powerindicator 8 USBport

ForconnectingUSBmemories,HUBs,colorgrading controllers(TangentWave'sElement-Tk),orwireless LANdevices(Wi-Fiadapters).

9 Headphoneterminal

About the power indicator Displaysthestatusofthemainunit.Thepowerindicatorwillflashduringfirmwareupdatesorwhenanerroris detectedevenifitissetto[Off]. Off:whenpowersupplyisnotconnected Greenlit:whenapowersupplyisconnectedandthevideodisplay'spowerison Greenflash:duringcalibrationorfirmwareupdate Amberlit:duringstandby(powersupplyisconnectedandthepowertothevideodisplayisoff) Amberflash:whenerrorisdetected

Names and functions of parts

9

E ng

lish

Back face of the main unit

Af

Ad

Aj Ak

Aq Aq

Aa

Ag

Ah

As

Aq Carryinghandle Aa Rearstand As SDIoutputterminal

PassesthroughoutputofthesignalinputtoAd. Ad SDIinputterminal

InputstheSDIsignal. Af REMOTEterminal

Connectsanexternalcontroldevice.

Ag LAN(10/100BASE)terminal ConnectsanexternalcontroldeviceorCanondisplay.

Ah Cordclampmountinghole Aj ACpowerinputterminal Ak HDMIinputterminal

InputstheHDMIsignal.

CAUTION DonotusetheHUBwhenconnectingawirelessLANadapter(Wi-Fiadapter)toaUSBterminal.Thevideodisplaymaynotwork.

Forsafety,donotconnectanyconnectorthatmayhaveexcessivevoltagetotheterminalofthevideodisplaywhenconnecting peripheraldevices.

PassthroughSD-SDIsignalsarenotoutputcorrectly.

Note AboutUSBMemory

- BothFAT16andFAT32USBmemorydevicesaresupported.

- CorrectoperationcannotbeguaranteedforallUSBmemorydevices.

- Itmaytake10secondsormorefortheUSBmemorytoberecognized.IfthefunctiontosavedataonaUSBmemoryis executedduringrecognition,themessage[DetectingUSBmemory]isdisplayed.

10

Setting Up

Carrying the video display When carrying the video display, be sure to hold it by the carrying handle.

CAUTION When unpacking, carrying, installing, or connecting the main unit, please note that at

least two people are required.

When carrying the video display, handle it carefully so not to touch or damage the screen.

Preventing from Tipping

CAUTION When securing the main unit to a table or desk, please ensure the table or desk is strong enough to carry the weight of the main

unit.

For safety, make sure to perform this step with at least two people.

Avoid touching the screen during this step as it may damage it.

For safety reasons, when using the display for extended periods of time in a situation where it is subject to vibrations, shocks, or is tilted (when moving in a live broadcast vehicle, etc.), take additional measures to ensure the display remains fixed, such as the use of the screw holes on the stand or rear.

Use correct size screws that fit the screw holes on the stand to fasten it to a desk or table

Screw hole 4- 4.5

Unit: mm

Setting Up

11

E ng

lish

Use a commercially-available belt or strap to fasten it to a wall or other surface 1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side.

2 Fasten the tips of the belt or strap to a floor or wall.

Commercially-availablebeltorstrap

Mounting the Main Unit on a Stand or Wall Thismainunitcanbefittedtoastand*ortoawallmountbracket*.Removethestandsbeforehand( 12). *Commerciallyavailable.

CAUTION Forsafety,makesuretoperformthisstepwithatleasttwopeople.

Makesurethatthemainunitdoesnotfallduringinstallation/removal.

Avoidtouchingthescreenduringthisstepasitmaydamageit.

Whenmountingthemainunitonawall,makesurethewallhassufficientstrength.Ifnecessary,applyreinforcement.Also,make suretochecktheloadcapacityofthestandorwallmountbracket.

Whenthevideodisplayisplacedonarackordisplaystandandventilationarounditisblockedbyequipmentplacedaboveor beloworinasurroundingarea,theoperatingtemperaturemayincrease,causingafailureoroverheating.Inordertomaintainthe operatingtemperatureconditionofthevideodisplay(5Cto35C),makespaceofatleast1U(4.4cm)aboveandbelowandat least4cm(1.6in.)spacefromitsback.Makesufficientspacefromperipheralequipment,securevents,orinstallaventilationfan.

Wheninstallingthevideodisplayonawall,makesufficientspacefromthewallsothatcablesarenotsqueezedortwisted.

1 Attach a commercially available stand or wall mount bracket using the screw holes on the back or side face of the main unit.

Rear4-M6 Depth8(Max.)

Unit:mm

Setting Up

12

Removing/attaching the stand Thestandcanberemovedwhenstoringthedisplayonarackordisplayshelf.

CAUTION Makesuretoperformthisstepwithatleasttwopeople.

Useaflat,clearsurfacewhenattaching/detachingthestands.

Thedisplaycantipoverifthestandhasnotbeenattached.

Avoidtouchingthescreenduringthisstepasitmaydamageit.

Detaching

1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.

2 Front stands (2): Remove the screws holding the stands (2 each). Rear stands (4): Remove the screws holding the stands (1 each). Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.

Attaching

1 Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.

2 Align the position of the stand and screw hole on the video display. Alighttheconvexpartofthestandandconcavepartofthevideodisplay.

3 Front stands (2): Fasten the screws holding the stands (2 each). Rear stands (4): Fasten the screws holding the stands (1 each).

Rear

Screenside

Rearstand

Frontstand mountingscrewhole

Mountingscrew

Concavepart

Convexpart

Concavepart Convexpart

Frontstand

Setting Up

13

E ng

lish

Attaching/detaching the AC Power Cord Clamp (provided)

Attaching

InstalltheACpowercordclampbeforeconnectingtheACpowercordtothemainunit.

1 Insert the AC power cord clamp connector into the cord clamp mounting hole (1).

2 Connect the AC power cord to the main unit (2).

3 Secure the AC power cord in place with the holder (3). Theholdershouldalwaysbefastenedinthepositionasshowninthe illustration.

4 Press the holder against the main unit (4). Makesurethatthereisnoslack(A). Pullingtheholderlockleverinthedirectionofthearrowwillallowyouto adjusttheholderposition(5).

Detaching

1 Pull the holder lever in the direction of the arrow (6) and remove the AC power cord clamp from the AC power cord.

2 Press the knobs on the left and right and pull out the AC power cord clamp from the video display (7).

2

1

3

4

A

5

6

7

Setting Up

14

Connecting the Main Unit to Input Devices The video display has SDI and HDMI input terminals to connect input devices.

CAUTION Check that the power to the video display and input devices is switched off before connecting an input device to this display's SDI

or HDMI input terminal.

Use a HDMI cable with the High Speed logo that complies with the HDMI standard. When a non-compliant HDMI standard cable is used, the video display may not work normally, for example, video becomes choppy or nothing is displayed.

Reference The connection is tested using D5.5UHDC03E BNC cables manufactured by Canare Electric Co.

When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection.

Each input terminal is compatible with through output. When signals are input from Input (IN) A, connect the cable to the SDI (OUT) terminal of Input A.

SDI input terminal

HDMI input terminal

Signals that can be connected to the SDI input terminal

Input signal Input terminal

Quad Link (Square Division)

12G/6G/3G/ HD-SDI

Top left, Mapping signal Input A

Single input system Top right, Mapping signal Input B

Bottom left, Mapping signal Input C

Bottom right, Mapping signal Input D

Quad Link (2 Sample Interleave)

3G-SDI Link 1 Input A

Single input system Link 2 Input B

Link 3 Input C

Link 4 Input D

Dual Link 6G/3G-SDI Link 1 Input A

Two input systems Link 2 Input B

Link 1 Input C

Link 2 Input D

Single Link 12G/6G/3G/HD/ SD-SDI

Input A/Input B/ Input C/Input D

Four input systems

Setting Up

15

E ng

lish

Turning on the Main Unit's power 1 Plug the provided AC power cord to the AC power supply input terminal at the rear.

Thevideodisplaygoesintostandbyandthepowerindicatorlightsupinamber.

2 Press the power supply button at the front. Thepowerindicatorlightsgreen.

Note Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepowerbefore use.

Basic operations to use the OSD menu ThevideodisplaysettingsarechangedfromtheOSDmenu.Usingbuttonsandjogdialonthevideodisplay,youcan adjustimagequalityandconfiguresettingsforinputsignals.

MENUbutton Opens/closestheOSD menu,ormovesupone levelinamenu.

RESETbutton Resetstheitemstobeadjustedusingthesliderand enteredcharacters.

Jogdial orrotation:Usedtomovetoadifferentitemandchange

settings. Press:Confirmssettingsormovestheselectionframeup/down1level.

16

Mainspecifications/Performance

Panel

PanelType IPSLCDpanel

ScreenSize 31.1inch(78.91cm)

AspectRatio 17:9

Resolution 4096x2160

ActiveDisplayArea Approximately698.0x368.1mm

PixelPitch 170m

Image quality

Brightness* Standard 100cd/m2

Peak,Fullscreen white

2000cd/m2

ViewAngle(Up,Down,Left,Right) 89(contrastratio10:1orhigher)

SurfaceTreatment Anti-glarecoating

General

BacklightType LED,directdowntype

Power RatedVoltage:100240VACRatedFrequency:50/60Hz

Powerconsumption Atmaximumload(includingchangeinbrightnessthroughaging):Approximately840W Atfactoryshipment:Approximately175W

Environmental Conditions

Operating Temperatureandhumidity:535C(4195F),2085%RH(nocondensation) Recommendedrangeoftemperatureandhumidity:15 30C(5986F)(20to80%RH,nocondensation)

Pressure:7001060hPa

Storage/ Transporting

Temperatureandhumidity:-2040C(-4104F),1085%RH(nocondensation) 4160C(105140F),1030%RH(nocondensation)

Pressure:7001060hPa

Dimensions(widthxheightxdepth) Includingstandsandhandle:Approx.749492335mm(29.519.413.2in.) Mainunitonly,excludingprotrusions:Approx.749470295mm(29.518.511.6in.)

Weight Approximately31kg(68.2lb)

MountingHolePitch VESAstandard200x200mm(7.97.9in.)

*Brightnessvaluesarestandardvaluesandnotguaranteedvalues.

Main specifications/Performance

17

E ng

lish

Interface

Input 12G/6G/3G/HD/ SD-SDI

4 BNC (75) receptacle terminal 12G-SDI: Compliant with SMPTE 2082 6G-SDI: Compliant with SMPTE 2081 3G-SDI: Compliant with SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/

428-19/428-9 HD-SDI: Compliant with SMPTE 2048-2/274M/292-1/296/428-19/428-9 SD-SDI: Compliant with SMPTE 259M

HDMI 1 type A terminal Contents protection standard: HDCP 2.2

Output 12G/6G/3G/HD-SDI 4 (pass-thru)

Head phone 1 stereo mini jack, Supported impedance: 32 to 64

Others USB 1 USB A receptacle terminal Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed)/FS (Full Speed)/HS (High Speed) mode compatible Compliant with Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0

LAN 1 RJ-45 terminal Compliant with IEEE802.3 10BASE-TX/IEEE802.3u 100BASE-TX

REMOTE 1 RJ-45 terminal, GPI 8 pins

Weight and dimensions are approximate. Errors and omissions excepted. The information in this document is verified as of August 2019. Subject to change without notice.

Main specifications/Performance

18

Dimensions

615 (24.2)

749 (29.5)

47 0

(1 8.

5)

49 2

(1 9.

4)

20 0

(7 .9

)

200 (7.9)

615 (24.2)

12 1.

5 (4

.8 )

28 1.

5 (1

1. 1)

161.7 (6.4)

21 .1

(0 .8

)

11 2.

5 (4

.4 )

15 (0

.6 )

4-M6 Depth 8 (0.3) (Max.)

Center of panel

4- 4.5 (0.2)

25.3 (1.0)

335 (13.2)

295 (11.6)

Unit:mm(inch)

Front

Rear

Side

Bottom

19

E ng

lish

USA

CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES

ThelimitedwarrantysetforthbelowisgivenbyCanonU.S.A.,Inc.('CanonUSA')withrespecttoCanonProfessional DisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipmentsoriginalcontainer,when purchasedintheUnitedStates.ThislimitedwarrantyisonlyeffectiveuponpresentationofyourBillofSaleorother proofofpurchase. CanonUSAwarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer,that theEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiodof ONE-YEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthiswarranty,youmustpre-pay theshippingcharges,andyoumustencloseacopyoftheBillofSaleorotherproofofpurchasewithacomplete explanationoftheproblem.EquipmentreturnedtoaCanonUSAfactoryservicefacility,andproventobedefective uponinspection,willbe,withoutcharge,: (a)repairedutilizingneworcomparablerefurbishedparts,or (b)exchangedforrefurbishedornewEquipment asdeterminedintheCanonUSAsrepairfacilityssolediscretion.TherepairedorexchangedEquipmentwillbeshipped backfreeofcharge.WarrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodoftheEquipment. Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunitytoapproveor rejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprove,repairswillbemadeandtheEquipment willbereturnedatyourriskandexpense.Ifyoureject,theEquipmentwillbereturnedtoyouatnochargetoyoutoan addresswithintheUnitedStates.

This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non- Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non- Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.

Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedthe EquipmentorcontacttheCANONINFORMATIONCENTERAT855-4K-CANON(855-452-2666)orontheinternetat pro.usa.canon.com/support.YouwillbedirectedtothenearestservicefacilityforyourEquipment.

Technicalsupportprogramspecificssubjecttochangewithoutnotice.

ThisLimitedWarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthe followingcases:

A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonUSAsusersmanual; B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage; C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonUSA)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems; D. IfdefectsordamagesarecausedbyserviceotherthanCanonUSA'sfactoryservicecentersorauthorized servicefacilities; E. Anyinternalmodificationtoproducthardwareorfirmware; F. AnymaintenanceoftheEquipment,includinganyfeesforsuchMaintenance; G. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.

20

ThisLimitedWarrantydoesnotapplytoEquipmentpurchasedoutsidetheUnitedStates.ThisLimitedWarrantydoes notapplytoaccessoriesorconsumablesfortheEquipment,whicharesold"ASIS",withoutwarrantyofanykindby CanonUSA.PleaseretainthiswarrantycardandyourBillofSaleasapermanentrecordofyourpurchase.Thiscard ensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modificationorproductrecallunder applicablelawsorregulations.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection, modificationorproductrecallunderapplicablelawsorregulations.

NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENTS HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU). THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.

Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.

CANON U.S.A., INC

21

E ng

lish

CANADA

CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN CANADA

ThelimitedwarrantysetforthbelowisgivenbyCanonCanadaInc.('CanonCanada')withrespecttoCanon ProfessionalDisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipmentsoriginal container,whenpurchasedinCanada.Thislimitedwarrantyisonlyeffectiveuponpresentationofyourbillofsaleor otherproofofpurchase. CanonCanadawarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer, thattheEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiod ofONEYEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthislimitedwarranty,youmustpre- paytheshippingcharges,andyoumustencloseacopyofthebillofsaleorotherproofofpurchasewithacomplete explanationoftheproblem.EquipmentreturnedtoaCanonCanadafactoryservicefacilityandproventobedefective uponinspectionwillbe,withoutcharge: (a)repairedutilizingneworcomparablerefurbishedparts,or (b)exchangedforrefurbishedornewEquipment, asdeterminedbytheCanonCanadafactoryservicecenter,initssolediscretion.TherepairedorexchangedEquipment willbeshippedbackfreeofcharge.Warrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodof theEquipment.Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunity toapproveorrejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprovetheproposedrepairs, repairswillbemadeandtheEquipmentwillbereturnedatyourriskandexpense.Ifyourejecttheproposedrepairs, theEquipmentwillbereturnedtoyouatnochargetoyoutoanaddresswithinCanada.

This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon Canada will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible computer equipment, peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty or condition of any kind by Canon Canada, including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.

Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedthe EquipmentorcontacttheCANONINFORMATIONCENTERat800-667-2666orontheinternetatwww.canon.ca/ pro.

Technicalsupportprogramspecificsaresubjecttochangewithoutnotice.

ThislimitedwarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthefollowing cases: A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonCanadasusersmanual; B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage; C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonCanada)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems D. IfdefectsordamagesarecausedbyserviceotherthanCanonCanada'sfactoryservicecentersorauthorized servicefacilities; E. Anyinternalmodificationtoproducthardwareorfirmware; F. AnymaintenanceoftheEquipment,includinganyfeesforsuchmaintenance;or G. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.

22

ThislimitedwarrantydoesnotapplytoEquipmentpurchasedoutsideCanada.Thislimitedwarrantydoesnotapplyto accessoriesorconsumablesfortheEquipment,whicharesold"ASIS",withoutwarrantyorconditionofanykindby CanonCanada.Pleaseretainthiswarrantycardandyourbillofsaleorotherproofofpurchaseasapermanentrecord ofyourpurchase.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modification orproductrecallunderapplicablelawsorregulations.

NO IMPLIED WARRANTY OR CONDITION, INCLUDING IN RESPECT OF THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THIS EQUIPMENT AFTER THE EXPIRATION OF THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTEE UNDER THIS LIMITED WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENTS HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.

Thislimitedwarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromprovinceto province.

CANON CANADA INC.

USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support

(855) 4K-CANON (855-452-2666) (USA only)

UNITED KINGDOM Canon UK Ltd Unit 160, Centennial Park, Centennial Avenue, Elstree, Hertfordshire, WD6 3SG

020-7660-0186

Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Canon Europa N.V.

Manualsnet FAQs

If you want to find out how the DP-V3010 Canon works, you can view and download the Canon DP-V3010 v2 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Canon DP-V3010 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Canon DP-V3010. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon DP-V3010 v2 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon DP-V3010 v2 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon DP-V3010 v2 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon DP-V3010 v2 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon DP-V3010 v2 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.