Canon DP-V2410 v2 Instruction Manual PDF
Summary of Content for Canon DP-V2410 v2 Instruction Manual PDF
Instruction Manual
Video Display
Beforeuse,besuretoreadthisguide,includingthe safetyandhandlingprecautions.
Readingthisguidewillhelpyoulearntousethevideo displayproperly.
Storethisguidesafelysothatyoucanuseitinthefuture. English
2 Table of Content
Table of Content
Introduction .................................................................................................................................. 4 Aboutthismanual.................................................................................................................................... 4
Trademarks.............................................................................................................................................. 4
SuppliedAccessories............................................................................................................................... 4
Safety Precautions ....................................................................................................................... 5
Handling Precautions ................................................................................................................... 6
Features ........................................................................................................................................ 8
Nomenclature ............................................................................................................................... 9
Installation/Connection .............................................................................................................. 11 HowtoCarrytheMainUnit.................................................................................................................... 11
Procedurestoattachtheprotectionpanel.............................................................................................. 11
Procedurestoattach/detachstands....................................................................................................... 12
PreventingfromTipping......................................................................................................................... 13
MountingtheMainUnitonaStandorWall............................................................................................. 14
ConnectingtheMainUnittoInputDevices............................................................................................. 15
Turning on the Power ................................................................................................................. 17 TurningonthePoweroftheMainUnit.................................................................................................... 17
Operating the Video Display ....................................................................................................... 18 Operatingthejogdial............................................................................................................................. 18
BasicoperationstousetheOSDmenu.................................................................................................. 18
AdjustingImageQualityWhileViewingtheEntireImage......................................................................... 20
TemporarilySavingParameters(AnchorPointSetting)............................................................................ 21
Enlargingthedisplay(Zoomfunction)..................................................................................................... 21
ChangingImageQualityAutomaticallyAccordingtoInputSignal............................................................ 22
Adjustimagequalityonleft/rightsideofscreen(imagecomparisonmode)............................................. 23
CalibrationwithoutaPC......................................................................................................................... 23
Export/Import......................................................................................................................................... 25
SetDate/Time........................................................................................................................................ 27
InputtingCharacters............................................................................................................................... 28
UsingtheFunction(F)Buttons............................................................................................................... 28
UsingtheChannel(CH)Button............................................................................................................... 30
CheckingSignalInformationandStatusoftheMainUnit........................................................................ 31
Operatingthevideodisplayusinganexternaldevice[LANterminal]....................................................... 32
Operatingthevideodisplayusinganexternaldevice[USBterminal:Wi-Ficonnection]........................... 33
Useawebbrowsertoremotelyoperatethevideodisplay...................................................................... 35
OSD Menu .................................................................................................................................. 38 OSDMenuIndex.................................................................................................................................... 38
Adjustment............................................................................................................................................. 45
3Table of Content
ChannelSettings.................................................................................................................................... 60
DisplaySettings...................................................................................................................................... 66
AudioSettings........................................................................................................................................ 70
MarkerSettings...................................................................................................................................... 71
FunctionSettings................................................................................................................................... 76
PictureFunctionSettings........................................................................................................................ 89
Network/IMDSettings............................................................................................................................ 93
SystemSettings..................................................................................................................................... 95
SignalInformation................................................................................................................................. 101
SystemInformation.............................................................................................................................. 101
Main specifications/Performance ............................................................................................. 102 Dimensions.......................................................................................................................................... 104
Appendix .................................................................................................................................. 105 SupportedSignalFormat..................................................................................................................... 105
Image/FrameDisplay............................................................................................................................ 119
Error Messages ........................................................................................................................ 122
Troubleshooting ........................................................................................................................ 125
Software Used in This Product ................................................................................................. 127
Index ......................................................................................................................................... 132
4 Introduction
Introduction ThankyouforpurchasingtheVideoDisplayDP-V2410. TheOnScreenDisplay(thereafterreferredtoOSD)defaultlanguagesettingisEnglish.TochangetheOSDmenu languagesetting,pleaserefertop.95.
About this manual
Someoftheillustrationusedinthemanualhavebeensimplifiedforclarity.
Conventions used in this manual
:Indicatesareferencepage. Note:Indicatesanote. Reference:Indicatesreferenceinformation. CAUTION:Indicatesanitemyoumustobserve.
Trademarks
HDMI,HDMIlogo,andHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI LicensingAdministrator,Inc.intheU.S.andothercountries.
VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother countries.
Wi-Fi,WPA,andWPA2areregisteredtrademarksoftheWi-FiAlliance.
AppleandSafariaretrademarksofAppleInc.registeredintheUnitedStatesandothercountries.
GoogleandGoogleChromearetrademarksorregisteredtrademarksofGoogleLLC.
Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.
Supplied Accessories
Thefollowingitemsaresuppliedwiththisproduct.Pleasecheckbeforeusing.
ACPowerCordHT-21 DP-V2410InstructionManual (thisdocument)
5Safety Precautions
Safety Precautions For the customers in the U.S.A. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttoPart15of theFCCRules. Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentis operatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergy and,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycauseharmfulinterferencetoradio communications.Operationofthisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcase theuserwillberequiredtocorrecttheinterferenceathisownexpense.
Donotmakeanychangesormodificationstotheequipmentunlessotherwisespecifiedinthemanual.Ifsuchchanges ormodificationsshouldbemade,youcouldberequiredtostopoperationoftheequipment. UseofshieldedcableisrequiredtocomplywithclassAlimitsinSubpartBofPart15ofFCCRules.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterference thatmaycauseundesiredoperation.
CanonU.S.AInc. OneCanonPark,Melville,NY11747,U.S.A. TelNo.(631)330-5000
For the customers in Canada CANICES-3(A)/NMB-3(A)
For the customers in Europe Warning; ThisisaclassAproduct.Inadomesticenvironmentthisproductmaycauseradiointerferenceinwhichcasetheuser mayberequiredtotakeadequatemeasures.
CANONINC. 30-2,Shimomaruko3-chome,Ohta-ku,Tokyo146-8501,Japan
CANONEUROPAN.V. Bovenkerkerweg59,1185XBAmstelveen,TheNetherlands
OnlyforEuropeanUnionandEEA(Norway,IcelandandLiechtenstein) Thissymbolindicatesthatthisproductisnottobedisposedofwithyourhouseholdwaste, accordingtotheWEEEDirective(2012/19/EU)andnationallegislation.Thisproductshould behandedovertoadesignatedcollectionpoint,e.g.,onanauthorizedone-for-onebasis whenyoubuyanewsimilarproductortoanauthorizedcollectionsiteforrecyclingwaste electricalandelectronicequipment(EEE).Improperhandlingofthistypeofwastecouldhave apossiblenegativeimpactontheenvironmentandhumanhealthduetopotentiallyhazardous substancesthataregenerallyassociatedwithEEE.Atthesametime,yourcooperationinthe correctdisposalofthisproductwillcontributetotheeffectiveusageofnaturalresources.For moreinformationaboutwhereyoucandropoffyourwasteequipmentforrecycling,please contactyourlocalcityoffice,wasteauthority,approvedWEEEschemeoryourhouseholdwaste disposalservice.FormoreinformationregardingreturnandrecyclingofWEEEproducts,please visit www.canon-europe.com/weee.
6 Handling Precautions
Handling Precautions Places to avoid using the video display
Donotusethevideodisplayinthefollowingplacesorconditions. Placeswithexcessivedustorhumidity
Placesthatwillexposethevideodisplaytodirectsunlight,smoke(suchasfromakeroseneheaterorothersuch source)orsteam
Nearheatsources,humidifiersorflammablegas
Nearawindowduringrainorsnow
Nearwaterorotherplacesthatcouldcausemoisturetoformonthevideodisplay
Screen Handling
Thescreenmaybedamagedifitisleftfacingstrongsourceoflight.Pleasetakeprecautionswhenplacingitnear awindow.
Donotpressfirmlyonthescreen,scratchitorplaceanobjectonthescreen.Itcancausenon-uniformityor damagetothepanel.
Thescreenandcabinetmaybecomewarmduringuse.Notethisdoesnotconstituteamalfunction.
About Backlight
Thebacklighthasalimitedservicelifesoitsbrightnessmaydegradeandcolormaychangeduetoaging.
About Temporary Screen burn-in
Ifastationaryimageisdisplayedforaprolongedperiod,screenburn-inmayoccurwhereyouseeremnantsofwhat wasdisplayed.ThisisacharacteristicofLCDandisnotafailure.However,thisisonlytemporaryandwilldisappear whenplayingvideo.
About the LCD screen
Thescreenisproducedusingextremelyhigh-precisionmanufacturingtechniques,withmorethan99.99%ofthepixels operatingtospecification.Lessthan0.01%ofthepixelsmayoccasionallymisfireorappearasblack,red,blueor greendots.Inaddition,thistendencymayincreasethroughlongtermuseduetocharacteristicoftheLCDpanel. Thesedonotconstituteamalfunction.
Condensation
Ifthisequipmentisbroughtintoawarmroomwhileitiscoldoriftheroomisheatedsuddenly,condensationmayform onthesurfaceorinsidetheequipment.Notethattheequipmentmaybedamagedifitisusedundersuchcondition. Ifcondensationhasformedonthesurfaceorinsidetheequipment,donotusethevideodisplayasitmayget damaged.Turnthepoweroffandwaituntilthecondensationhasevaporatedbeforeusingthevideodisplay.
7Handling Precautions
Cleaning
Beforecleaning,besuretounplugtheACpowersupplyandDCpowerplugfromthewalloutlet.
Thescreenhasaspecialsurfacetreatment,avoidtouchingitdirectlywithyourhand.Inaddition,neveraffix adhesiveobjectssuchasseals.
Neverusealcoholorbenzene,thinner,acidiccleaningsolution,alkalinecleaningsolution,abrasiveorchemical wipesbecausethesewilldamagethescreen.
Ifthescreenisdirty,wipegentlywithsoftdryclothsuchascleaningclothoreyeglassescleaningcloth.Wipingthe screentoohardmaycauseunevennessonthescreenordamagetheLCDpanel.Thescreenmaybescratchedif wipedtoohardwithacleaningclothwithforeignparticlesattached.
Whenthescreenisextremelydirty,wipewithsoftclothsuchascleaningclothoreyeglassescleaningcloth moistenedwithwater-dilutedneutraldetergent.
Useablowertoremovedustfromthesurfaceofthescreen.
Wipedirtoncabinetwithasoftcloth.Ifthescreenisverydirty,useamoistenedclothwithwaterormilddetergent dilutedwithwater.Donotusealcohol,benzene,paintthinner,orpesticidesastheymaydamagethesurfacefinish orerasecharactersonthecabinet.
Disposing
Donotdisposetogetherwithnormalwaste.Donotincludethevideodisplayinwastethatwillbetakentolandfill.
Observetherulesandregulationsofyourlocalauthoritieswhendisposing.
8 Features
Features VideoDisplayDP-V2410isareferencedisplaysuitableforvideoproductionforbothdigitalcinemaandbroadcasting. ThevideodisplayprovideshighimagequalitymadepossiblebyCanon'simage-makingtechnologyaswellasbuilt-in performanceandfunctionssuitableforshootingvideo.
Image quality and functions for shooting video
Equippedwithapanelwith4096x2160resolutionandbacklightsystem.
Highbrightnessisavailablewhenusedinabrightplace.
Supportshighcontrastvalueof2000:1orhigher.
Highuniformityisprovidedbyminimizinganyvariationduetotemperaturechangesandaging.
SupportswideDCI-P3colorgamut.
Equippedwithfunctionstoimproveimagequalityperformance.
-Supports"BoostContrast"toincreasethebrightnesswhenusedinabrightenvironment. -DisplaysITU-RBT.2020colorgamutattheoptimumlevelandsupports"ConstantLuminance". EquippedwithHighDynamicRange(HDR)displayfunction.
SupportsACESproxy.
Equippedwithfunctionstoassistshootingandvideochecking,includingWaveFormMonitor,VectorScope, ScreenCapture,Zoom,andFalseColor.
SupportsgammaequivalenttoCRTstandardizedbyITU-RBT.1886.
Acolorgradingcontroller(Element-TkmadebyTangentWaveLtd),externalsensor,USBmemory,orwirelessLAN terminal(Wi-Fiadapter)canbeconnectedtotheUSBport.
DisplayControllerCL-01(includedwithDP-V3010),externalcontroldevices,Canondisplays,etccanbe connectedtotheLANterminal
Supports"SquareDivision"and"2SampleInterleave"videosignaltransportmethods.
Includesamulti-displayfunction(4or2screens)
EquippedwithaHDMIinputterminal.
Link with digital cinema cameras
Supports4KRAW.Establishes4KRAWworkflowonACES2065-1.
CINEMAEOSSYSTEMlink
ARRI/PanasonicCameraSystemlink
Portability
Small,light-weightbodywitha24-inchpanelandweightoflessthan12kg
Highdurabilityachievedbyametaloutercovering
Thehandleonthemainunitisconvenientforinstallationandtransporting.Thehandleandadjustabletwoposition standprovidesflexibleinstallationandhighportability.
SupportsDCpowersupplyinput.
9Nomenclature
Nomenclature Front face of the main unit
2
1 1
3 4 5 6 7 8
9
1 Stand Therearetwomountingpositions. 12
2 Headphoneterminal Connectionforheadphoneset. 70
3 USBport Connectionforanexternalsensorforcalibration( 23),USBmemory,HUB,color gradingcontroller(Element-TkmadebyTangentWaveLtd),orwirelessLANadapter (Wi-Fiadapter, 33).
4 CH1to3buttons Changeschannel. 30
5 CDLbutton SwitchesbetweennormalandCDLmode.
6 F1toF8buttons Executethedefinedfunction.YoucanassigndifferentfunctionsonFbuttonsinthe normalandCDLmodesrespectively.
28
7 MENUbutton Opens/closestheOSDmenu,ormovesuponelevelinamenu. 18
Jogdial MovestheselectionframewithintheOSDmenu,changesthesettings(up/down,left/ right,rotation)anddetermines(press)theselection.
18
RESETbutton Resetstheitemstobeadjustedusingthesliderandenteredcharacters. 18
8 (Power)button TurnspowerOn/Off. 17
9 Powerindicator Displaysthestatusofthemainunit.Thebrightnessofthepowerindicatorcanbeset from"Off"or"1(dark)to5(brightest)"( 96).Evenwhenthepowerindicatoris"Off",it willflashduringfirmwareupgrade,orwhenanerrorisdetected. Off:whenACorDCpowersupplyisnotconnected Greenlit:whenanACorDCpowersupplyisconnectedandthepowerofthevideo
displayison Greenflash:duringcalibrationorfirmwareupgrade Amberlit:duringstandby(anACorDCpowersupplyisconnectedandthepowerofthe
videodisplayisoff) Amberflash:whenerrorisdetected
10 Nomenclature
Back face of the main unit
Aq
Aa
As
Ad
AfAg Ah
Aq Carryinghandle Usedtoinstall,connect,orcarrytheunit. 11
Aa HDMIinputterminal UsedtoinputHDMIsignals. 16
As LAN(10/100BASE) terminal
ConnectionforDisplayControllerCL-01(includedwithDP-V3010),externalcontrol devices,Canondisplays,etc.
Ad 3G/HD-SDIoutput terminal
Passthroughoutputcorrespondingto3G/HD-SDIinputterminal.
Af 3G/HD-SDIinput terminal
UsedtoinputSDIsignals. 15
Ag DCpowerinput terminal
ConnectionforDCpowersupply. 17
Ah ACpowerinput terminal
ConnectionfortheprovidedACpowersupplycord. 17
CAUTION
WhenconnectinganexternalsensorforcalibrationtotheUSBport,cablelengthmustnotexceed3m.Otherwise, communicationerrormayoccurandcorrectcalibrationmaynotbepossible.
DonotusetheHUBwhenconnectingawirelessLANadapter(Wi-Fiadapter)toaUSBterminal.Thevideodisplaymaynot work.
Forsafety,donotconnectanyconnectorthatmayhaveexcessivevoltagetotheterminalofthevideodisplaywhen connectingperipheraldevices.
PassthroughSD-SDIsignalsarenotoutputcorrectly.
Note
BothFAT16andFAT32USBmemorydevicesaresupported.
ProperoperationcannotbeguaranteedforallUSBmemories.
Itmaytake10secondsormorefortheUSBmemorytoberecognized.IfthefunctiontosavedataonaUSBmemoryis executedduringrecognition,themessage"DetectingUSBmemory"isdisplayed.
11Installation/Connection
Installation/Connection How to Carry the Main Unit
Whenliftingthevideodisplay,besuretoholdthecarryinghandleontheback.
CAUTION
Whencarryingthevideodisplay,handleitcarefullynottotouchordamagethescreen.
Procedures to attach the protection panel
Youcanattachtheprotectionpaneltoprotectthescreenwhencarryingthevideodisplayorwhenusingitoutdoors.
1. Unscrew the four screws on the front face. Usea1.5mmhexagonalkey. Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.
2. Place the protection panel by aligning its corners with the screw holes. Takecarewhenattachingthepanelinordertoavoiddamagingit.
4M3 7mmdeep(Max.)
CAUTION
Avoidtouchingthescreenduringthisstepasitmaydamageit.
12 Installation/Connection
Procedures to attach/detach stands
Thestandcanbeattachedintwodifferentpositions.Thissectiondescribestheproceduretoattach/detachthestand, tochangethestandposition.Italsodescribestheprocedureforinstallingthevideodisplayonarackorawall.
CAUTION
Useaflat,clearsurfacewhenattaching/detachingthestand.
Thedisplaycantipoverifthestandhasnotbeenattached.
Avoidtouchingthescreenduringthisstepasitmaydamageit.
Detaching
1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.
2. Remove four fixing screws. Donotlosetheremovedscrews.Donotusethesescrewsforotherpurposes.
Attaching
1. Place the display with the screen facing down on a soft cloth or cushioning material that is larger than the display.
2. Align the position of the stand and screw hole on the video display. Alighttheconvexpartofthestandandconcavepartofthevideodisplay.
3. Fix the left and right stands using two fixing screws respectively.
Rear
Screenside
Insidestandmountingpart
Stand
Standmounting screwhole
Mounting screw
Outsidestandmountingpart
Concavepart
Convexpart
Note
Itisrecommendedtomountbothstandsineithertheoutsideorinsidepositions.
13Installation/Connection
Preventing from Tipping
Fixingthevideodisplayusingscrewholesonthestandscanreducetheriskofthemainunittippingoverorfalling.
1. Use screws that fit the screw holes. Thescrewholesizeisshownbelow.
Screwhole 4 4.5
CAUTION
Whensecuringthemainunittoatableordesk,pleaseensureatableordeskisstrongenoughtocarrytheweightofthe mainunit.
Itisrecommendedtoobtainassistancefromanotherpersonwhenperformingthisstep.
Avoidtouchingthescreenduringthisstepasitmaydamageit.
14 Installation/Connection
Mounting the Main Unit on a Stand or Wall
Thismainunitcanbefittedtoastand*ortoawallmountbracket*.Removethestandsbeforehand( 12). ScrewscompatiblewiththismainunitareM4x7mm(VESAStandard100x100mm). *Commerciallyavailable.
CAUTION
Forsafety,makesuretoperformthisstepwithatleasttwopeople.
Whenmountingthemainunitonawall,makesurethewallhassufficientstrength.Ifnecessary,applyreinforcement.Also, makesuretochecktheloadcapacityofthestandorwallmountbracket.
Whenthevideodisplayisplacedonarackordisplaystandandventilationarounditisblockedbyequipmentplaced aboveorbeloworinasurroundingarea,theoperatingtemperaturemayincrease,causingafailureoroverheating.Inorder tomaintaintheoperatingtemperatureconditionofthevideodisplay(0Cto40C),makeaspaceofatleast1U(4.4cm) aboveandbelowandatleast4cmspacefromitsback.Makeasufficientspacefromperipheralequipment,securevents, orinstallaventilationfan.
Wheninstallingthevideodisplayonawall,makesufficientspacefromthewallsothatcablesarenotsqueezedortwisted.
Whenmountingacommerciallyavailablestandorwallmountbracket,besurethattheydonotcontactthecarrying handle.
Avoidtouchingthescreenduringthisstepasitmaydamageit.
Makesurethatthemainunitdoesnotfallduringinstallation/removal.
1. Attach a commercially available stand or wall mount bracket using four screw holes on the back or side face of the main unit ( 104). Thescrewholesizeisshownbelow.
Rear 4M4 7mmdeep(Max.)
2M4 8mmdeep(Max.)
Sameontheotherside
Side
15Installation/Connection
Connecting the Main Unit to Input Devices
Thevideodisplayhas3G/HD-SDIandHDMIinputterminalstoconnectinputdevices.
CAUTION
Checkthatthepowerofthevideodisplayandinputdevicesisswitchedoffbeforeconnecting.
SDI input signals
Refertothe3G/HD-SDIinputterminalsdiagramwhenconnectingtothedesiredinputsignal.(A,B,C,D)
Actualscreendisplaylocation
A B C D
C
B
D
A
Displayareaicon
SDI(IN)terminal
Inputsignal Inputterminal
QuadLink (SquareDivision)
3G/HD-SDI Topleft,Mappingsignal InputA
Singleinputsystem
Topright,Mappingsignal InputB
Bottomleft,Mappingsignal InputC
Bottomright,Mappingsignal InputD
QuadLink* (2SampleInterleave)
3G-SDI Link1 InputA
Link2 InputB
Link3 InputC
Link4 InputD
DualLink* 3G-SDI Link1 InputA
Twoinputsystems Link2 InputB
Link1 InputC
Link2 InputD
SingleLink 3G/HD/SD-SDI
InputA/InputB/ InputC/InputD
Fourinputsystems
*Thesignalsareautomaticallyswitchedwhen"LinkOrder"issetto"Automatic".
16 Installation/Connection
Reference
Theconnectionistestedusing4VS03A-5CBNCcables(multi)manufacturedbyCanareElectricCo.
When3G-SDIRAWsignalfrequencyexceeds30.00P,itbecomesadualconnection.
Eachinputterminaliscompatiblewiththroughoutput.WhensignalsareinputfromInputA,connectthecabletotheSDI (OUT)terminalofInputA.
HDMI input signal
HDMIinputterminal
CAUTION
UseaHDMIcablewiththeHighSpeedlogothatcomplieswiththeHDMIstandard.Whenanon-compliantHDMIstandard cableisused,thevideodisplaymaynotworknormally,forexampleavideobecomeschoppyornothingisdisplayed.
17Turning on the Power
Turning on the Power Thissectiondescribeshowtoturnonthepowerofthemainunit.
Turning on the Power of the Main Unit
1. Plug the provided AC power cord HT-21 to the AC power supply input terminal at the rear. Thevideodisplaygoesintostandbyandthepowerindicatorlightsupinamber.
When using a DC power supply
DCpowersupplyinputterminalspecificationsareshownbelow.Whenconnectednormally,thevideodisplaygoes intostandbyandthepowerindicatorlightsupinamber. CheckthespecificationsoftheDCpowersupplyinputterminalanduseapowersupplythatiscompatiblewiththevideodisplay.Usinga
powersupplywithincompatiblevoltageandpolaritymaycausefireorelectricshock.
Pin No. Signal
1 -(GND)
2 +(24Vto28V,allowablecurrent10Amin.)
3 N.C.
2. Press the power supply button at the front. Thepowerindicatorlightsgreen.
CAUTION
WhenusingtheprovidedpowerplugadapterPU-01,besuretoconnectthegroundterminaltotheground.
Usea2morshorterDCcordthatcanbearanelectriccurrentofatleast10A.Whenacablelongerthan2misused,the videodisplaymaynotworknormallyforexampleavideobecomeschoppyandnothingisdisplayed.
DonotconnectcablesforaudiodevicesorsoundcablestotheDCpowersupplyinputterminal,asitmaycausedamage tothedisplayunit.
Note
Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepower beforeusing.
WhenanACpowersupplyisconnectedduringtheuseofaDCpowersupply,thepowersourceisswitchedtotheAC powersupply.Whenthishappens,thepoweristurnedofftemporarilyandthenturnedonagain.
RefertotheCanonwebsitefordetailedinformationaboutDCpowersuppliesforwhichoperationhasbeenconfirmed.
18 Operating the Video Display
Operating the Video Display Usingbuttonsandjogdialonthevideodisplay,youcanadjustimagequalityandconfiguresettingsforinputsignals.In addition,youcanassignthefrequentlyusedfunctionstotheCHandFbuttons.
Operating the jog dial
Theprocedurestooperatethejogdialaredescribedbelow.
MENUbutton Opens/closestheOSD menu,ormovesupone levelinamenu.
RESETbutton Resetstheitemstobeadjustedusingthesliderand enteredcharacters.
Jogdial Up,down,left,right/rotation:Usedtomovetoadifferentitemand
changesettings. Press:Confirmssettingsormovestheselectionframeup/down1level.
Basic operations to use the OSD menu
ThissectiondescribesbasicoperationstousetheOSDmenu.
1. Press the MENU button to open the OSD menu.
MainMenu
TopScreen
SubMenu SettingOptions
19Operating the Video Display
2. Select an item using the jog dial and press it to determine the selection. Theselectionframemovestosubmenu.
3. Select an item using the jog dial and press it to determine the selection. Theselectionframemovestosettingoptions.
4. Select the setting using the jog dial. Settingschangeaccordingtotheoperationofthejogdial.
5. Press the jog dial to determine the selection. Theselectionframereturnstosubmenu.
6. Exit menu. WhenyoupresstheMENUbutton,theselectionframemovesuponemenulevel.Movetheselectionframeallthe waytothemainmenuonthetopscreenandthenpresstheMENUbuttontoexitthemenu.
Note
Thefollowingfunctionscanbereturnedtotheirfactorydefaultsettingsortheiranchorpoint( 21)bypressingtheRESET button,afteradjustingtheimagequality.
- "Contrast","Brightness","Chroma","Sharpness","Power","Saturation","Offset","Slope" In"User1-7"modewhereyouareperformingcalibration,thesettingreturnstothevalueaftercalibrationinsteadofthe factorydefault.
Toadjustimagequality,warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutes afterturningonthepowerbeforeusing.
TheOSDmenuandsliderwilldisappearautomaticallyifnooperationisperformedforapproximately1minute.TheF buttonwilldisappearautomaticallyifnooperationisperformedforapproximately10seconds.
Thesettingsthatcannotbeset,aregrayedout.
20 Operating the Video Display
Adjusting Image Quality While Viewing the Entire Image
YoucanadjusttheOSDmenutodisplayasaslideratthebottomofthescreen.Thisallowsfortheimagequalitytobe adjustedwhilstitisdisplayedonthescreen.
1. Press the jog dial when the selection frame is on setting options. Asliderappearsatthebottomofthescreen.
2. Make adjustments using the jog dial with using the slider as guide.
3. When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.
Adjusting "Gain R/G/B, Bias R/G/B" under "Color Temperature"
YoucanadjustRGBallatonceorindividuallywhenthesliderforadjusting"GainR/G/B"and"BiasR/G/B"are displayed.
1. Switch the guide in the upper right area of the slider screen using the jog dial ( ). Theindicationchangesto"RGB","R","G",and"B".
2. When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.
Adjusting "x, y" under "Color Temperature"
Youcanadjust"x,y"in"ColorTemperature"onthecolormap.
1. Adjust "x" with the and "y" with . Theadjustedvalueisindicatedbythe" "markonthecolormap.
2. When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.
Defaultvalue
Lastusedvalue
Currentvalue
Currentvalue
21Operating the Video Display
Temporarily Saving Parameters (Anchor Point Setting)
Youcantemporarilysaveparametersfor"Contrast","Brightness","Chroma","Sharpness",and"HDRRange"and recoverthevalues.See 52forsettinganchorpointsduringCDLadjustment.
1. Press the MENU button to open the OSD menu.
2. Select "Adjustment" using the jog dial and press the dial to determine the selection. Theselectionframemovestosubmenu.
3. Select "Anchor Adjustment" using the jog dial and press the dial to determine the selection. Whentheconfirmationscreenappears,select"OK".Theparameterissavedandsetsanchorpoint.
4. Adjust the image quality again and press the RESET button on the video display. PresstheRESETbuttontoreturntoeachsavedanchorpoint.
CurrentvalueLastusedvalue
Anchorpoint
Note
Executing"Reset"under"Adjustment"or"ResetAllSettings"under"SystemSettings"resetssavedanchorpointsandthe settingsreturntotheirfactorydefaultvalues.
Whencalibrationisperformedin"User1-7"under"PictureMode",thevaluesaresavedasanchorpoints.
Enlarging the display (Zoom function) ( 68)
Thezoomdisplaypositioncanbeadjusted,andthezoommagnification(2x,4x,8x)canbeselected.
1. Press the MENU button to open the OSD menu.
2. Select "Display Settings" "Zoom" using the jog dial.
3. Select "Zoom Preset" using the jog dial. Selectapresetzoomdisplay.
4. Select "Position" using the jog dial. Thezoomadjustmentscreenisdisplayed. -Tomovethedisplayposition:Movethejogdial( orrotation). -Toreturntothecenter:PresstheRESETbutton.
5. When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.
Zoom 2 [x4]
22 Operating the Video Display
Note
WhenmagnifyingtheimageandtheOSDmenuisnotbeingdisplayed,
- youcansetthemagnificationratiobypressingthejogdial.
- Youcanmovethedisplaylocationbymovingthejogdial( ).
- YoucansetthefollowingfunctionsusingtheCHbutton: CH1:Selectzoomtype;CH2:Switchbetweenzoompresets(Zoom1/Zoom2/Zoom3);CH3:Zoomoff
Changing Image Quality Automatically According to Input Signal
Onthisvideodisplay,youcanautomaticallychangetheimagequalityaccordingtovideoresolutionormetadata.
Changing "Picture Mode" automatically ( 62)
1. Press the MENU button to open the OSD menu.
2. Select "Channel Settings" "Select Channel" using the jog dial. Selectthechannel.
3. Select the "Channel Settings" "Picture Mode" "Type" using the jog dial. SelecttheType.
Changingbyindividualvideoresolution(4K/2K) Select"4K/2K".
Changingaccordingtovideoresolution(4K/2K)ormetadata(SDI) Select"Automatic".
4. Select the Picture Mode using the jog dial.
Changing the image quality setting according to video metadata (HDMI) ( 56)
1. Press the MENU button to open the OSD menu.
2. Select "Adjustment" "Picture Mode" using the jog dial. Select"User1"to"User7".
3. Select the "Channel Settings" "Picture Mode" "Type" using the jog dial. Selectotherthan"L/R".
4. Select "Adjustment" "Detail Settings" "HDMI Link" "Automatic Adjustment" using the jog dial. Select"On".
See"HDMILink"( 56)fortheconfigurablesettings.
Note
Whenautomaticchangingofimagequalityaccordingtovideoresolution(4K/2K)orSDImetadata isset,informationshowingwhichresolution(4K/2K,etc.)isselectedwillbedisplayedatthetop rightofthemenuscreen.
23Operating the Video Display
Adjust image quality on left/right side of screen (image comparison mode)
Youcandividethescreenintwoandadjusttheimagequalityontheleftandrightsidesofthescreenindividually.
1. Press the MENU button to open the OSD menu.
2. Select "Channel Settings" "Picture Mode" "Type" using the jog dial. Afterselecting"L/R",pressthejogdialtodeterminetheselection.
3. Select the screen to adjust image quality. WhentheOSDmenuisopen:
- Inthe"Adjustment"mainmenu,pressthejogdials button.
- Inthe"Adjustment"mainorsubmenu,presstheCH1button. WhentheOSDmenuisnotbeingdisplayed:Movethejogdial( ).
Eachtimethetargetscreenisswitched,theset"PictureMode"isdisplayedatthetop.
4. Adjust the image quality on the selected screen.
Note
WheninImageComparisonmode,aniconshowingwhichscreen(L/R)isselectedforimagequality adjustmentwillbedisplayedattherighttopofthe"Adjustment"menuscreen.
Thefunctionsthatcannotbeusedwhentherightscreenisselectedareasfollows.
- SubMenuitemsfor"Adjustment":"Contrast","BacklightControl","BoostContrast","HDR/SDRView","Calibration" Whentwoscreensaredisplayed,youcanadjusttheimagequalityoneachscreenindividuallyandcomparethem.
- Whentwoscreensaredisplayingthesameimage("SingleInputDualView" 63)
- Whentwoscreensaredisplayingdifferentimages("MultiView(Dual)" 60)
- TheHDR(HighDynamicRange)andSDR(StandardDynamicRange)displayscanbetestedsidebyside.("HDR/SDR View" 54)
Calibration without a PC ( 55)
When"User1-7"under"PictureMode"isselected,youcanperformcalibrationusinganexternalsensor,withoutusing thecomputer. ThesupportedexternalsensorsareKonikaMinoltaDisplayColorAnalyzersCA-310andCA-210.Besuretoalsoread theinstructionmanualoftheCA-310andCA-210. ThevideodisplaycanperformmeasurementorcalibrationofthedisplayusingtheDP-VColorAdjustmentsoftware. RefertotheCanonwebsitefortheDP-VColorAdjustment.
1. Connect the display color analyzer to the USB port of the main unit.
2. Open the OSD menu and select "Adjustment" "Detail Settings" "Calibration". Seteachtargetvalue.
24 Operating the Video Display
3. Press the jog dial and select "Start". Pleasefollowtheinformationindicatedonthescreen.
4. Initialize the sensor. SetthemodedialoftheUniversalMeasuringProbeto"0-CAL". Pressthejogdialofthevideodisplay,select"OK",andexecuteinitialization.
5. Place the universal measuring probe pointing at the center of the video display. Setthemodedialoftheuniversalmeasuringprobeto"MEAS"andplacetheprobeasshownbelowaccordingto thedisplayedcontent.Pressthejogdialofthevideodisplay,select"OK",andexecutecalibration.
KonicaMinoltaUniversalMeasuringProbe CA-310support:CA-PU32,CA-PU35 CA-210support:CA-PU12,CA-PU15
KonicaMinolta DisplayColorAnalyzerCA-310,CA-210
MainUnit
6. Finish calibration. Whenthemessage"Calibrationiscompleted."isdisplayed,pressthejogdialandselect"OK".
Ifthemessage"Calibrationerror."isdisplayed. Calibrationhasbeenterminatedduetoanerror.Themainunitreturnstothestatebeforecalibration.( 122)
Tocancelcalibration Pressthejogdialduringcalibrationandselect"Cancel".Themainunitreturnstothestatebeforecalibration.
Note
DuetothecharacteristicofLCDpanelandindividualdifferenceofCA-310andCA-210,thecalibrationresultsmaydiffer.
Performmatrixcalibrationofthedisplaycoloranalyzerpriortocalibration.Ifcalibrationisperformedwithoutperforming matrixcalibration,anerrormayoccur.RefertotheCA-310andCA-210instructionmanualforthedetailoperation.
Warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafterturningonthepower beforecalibration.
Performcalibrationinadarkroomsothatnoexternallightentersthesensor.Ifexternallightentersthesensor,low brightnesscharacteristicscannotbecalibratedcorrectly.
25Operating the Video Display
Export/Import
Youcanexport/importLUTandCDLparametersaswellasmainmenusettings.InsertaUSBmemorystickintothe USBportofthemainunit.
LUT Import ( 53)
1. Press the MENU button to open the OSD menu.
2. Select "Adjustment" "Detail Settings" "LUT Import" using the jog dial.
3. Select the file using the jog dial. Inthe"Filename"field,searchanddisplayafilewithextension".clut"intherootfolder.
4. Select the LUT type using the jog dial. SelecttheLUTtypebyusing"UserLUT","GammaLUT"or"GamutLUT".
Refertothe"ConceptDrawingofDisplayImageProcessingandLUT".Or,alsorefertothe"UserLUTCreation Guide"ontheCanonwebsite.
5. Select "Select LUT" using the jog dial. SelectsUserLUT/GammaLUT/GamutLUT1-8.
6. Select the standard color gamut using the jog dial. SelectthecolorgamutusedwhencreatingtheLUT(when"GamutLUT"under"LUTType"isselected).
7. Select "Execute" using the jog dial. Whentheconfirmationscreenappears,select"OK".Importstarts.
Note
TheLUTfileisproprietarytoCanonVideoDisplay.RefertotheCanonwebsiteforthefileformatandhowtocreate.
Upto1000LUTimportfilesarerecognized.
YoucandeletetheimportedLUT.YoucanspecifythenameofLUT( 53).
Import LUT le 3D-LUT
OSD Menu Gamma/EOTF
Setting
or Import LUT le
1D-LUT
or Import LUT le
3D-LUT
OSD Menu CDL/User LUT
Setting
OSD Menu Color
Temperature Setting
Color Temperature
OSD Menu Base Color
Gamut Setting
Color Gamut
Gamma 2.2
Color Gamut User selectable
Color Temperature User selectable)
3D-LUT Gamut LUT
1D-LUT Gamma LUT
3D-LUT User LUT
ConceptDrawingofDisplayImageProcessingandLUT
26 Operating the Video Display
Export/Import Main Menu Settings ( 98)
1. Press the MENU button to open the OSD menu.
2. Select "System Settings" "Export/Import".
3. Select "Export" or "Import" using the jog dial.
Exporting -Select"Target"from"USB","User1-3"or"LAN". Export"USB"totheUSBmemoryand"User1-3"tothebuilt-inmemoryofthemainunit.Whenyouselect"LAN", thefileisexportedtoadisplayconnectedviaLAN. -Ifyouselected"USB"or"User1"to"User3",select"Filename". Factorydefaultis"dinfo_dpv2410.dat".YoucanchangethenameofthefiletobeexportedtotheUSB memorywithin16one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols.
Ifyouselected"LAN",select"Display". SelectthedisplaytowhichtoexportthesettingsfromthedisplaysconnectedviaLAN.
-Select"Execute". Whentheconfirmationscreenappears,select"OK".Exportstarts.
Importing -Select"Target"from"USB"or"User1-3". Specifythedestinationtosavethefiletobeimported. -Select"Filename". -In"Settings",select"All"orMainMenuname. -Select"Execute". Whentheconfirmationscreenappears,select"OK".Importstarts.
Note
Afterexportto"User1-3",youcanselecttheconfigurationsatstartupfrom"User1-3"in"PoweronSetting"in"System Settings"( 98).
Toexportthisdevice'ssettingstootherCanondisplays:
- Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges,somesettingswillnotbecorrectly exported(settingswillnotbechanged,willreverttofactorydefaults,etc.)
- Whentheexportiscompleted,amessagewillappearonthetargetdisplay.
27Operating the Video Display
Exporting/Importing CDL Parameters ( 52)
1. Press the MENU button to open the OSD menu.
2. Select "Adjustment" "CDL/User LUT" using the jog dial. Select"CDL1-8".
3. Select "Detail Settings" "CDL Export" or "CDL Import".
Exporting -Select"CDLPreset". -Selectafileformat".ccc"or".cdl". -Select"Execute". Whentheconfirmationscreenappears,select"OK".Exportstarts.
Importing -Select"Filename". -Select"CDLPreset". -Select"Execute". Whentheconfirmationscreenappears,select"OK".Importstarts.
Note
Theexportedfileisautomaticallysavedunderthename"YYYYMMDDhhmmss_Presetname.ccc(cdl)".
Upto1000CDLimportfilesarerecognized.
Set Date/Time ( 95)
ThissectiondescribeshowtosettheDate/Time.TheDate/Timeofthisvideodisplaywillberesetifthepowercordis notconnectedforabout20days.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings" "Date/Time". AscreentoinputtheDate/Timeappears.
3. Set the Date/Time using the jog dial. Theselectionframemovesandnumberschangeasyouoperatethejogdial.Repeatuntilyoucompletesettingthe year,month,date,hour,andminute.
4. Press the jog dial when you are finished. Theselectionframemovesto"OK".
5. Check the content and press the jog dial to confirm the settings.
Reference
Whenselecting"Cancel"orpressingMENUbuttonbeforeselecting"OK",thesettingswillberesetandthepreviousscreen willbedisplayed.
28 Operating the Video Display
Inputting Characters
Thissectiondescribeshowtoinputthecharacters.
1. Press the MENU button to open the OSD menu.
2. The character input screen appears automatically when character input is required. Movetheselectionframetothelocationtoentercharacters usingthejogdial( ).
3. Select characters using the jog dial ( or rotation). Thefollowingcharacterscanbeselected:Press buttonstodisplaythemonebyone. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:,.:;`-+/=%&!?#_|$^~@{}[]<>()space Charactersthatcannotbeenteredareautomaticallyskipped.
4. Repeat steps 2 and 3 until the desired text has been inputted.
5. Press the jog dial when you are finished. Theselectionframemovesto"OK".
6. Check the content and press the jog dial to confirm the settings.
Reference
Whenselecting"Cancel"orpressingMENUbuttonbeforeselecting"OK",thesettingswillberesetandthepreviousscreen willbedisplayed.
Toerasecharactersintheselectionframeorresetit,presstheRESETbuttononthevideodisplay.
Using the Function (F) Buttons
YoucanassignfunctionstotheFbuttonsonthevideodisplaytoexecutetheminstantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings" "Function/Channel Button" "Display Function" or "Display Function (CDL)" and press the jog dial to determine the selection. AnewwindowopensanddisplaysbuttonnamesF1toF8.
3. Select the name of the button using the jog dial and press the jog dial to determine the selection. TheselectionframemovestonextOSDmenulevel.
4. Select the function to assign using the jog dial. See"DisplayFunction"or"DisplayFunction(CDL)"( 95,99)fortheavailablefunctions.
5. Press the jog dial to determine the selection. Thesettingisconfirmed.
29Operating the Video Display
Reference
HoldingtheFbuttondownwilldisplaythefunctionselectionscreen,andyoucansetthefunctionyouwishtoregister.
Turning"SystemSettings""OSDSettings""FunctionButtonGuide"to"On"willmeanthatwhenOSDisnot displayed,pressing/moving( ,orrotate)thejogdialwillallowyoutoseethelistoffunctionsregisteredtotheF button.Selectingafunctionfromthelistandpressing/moving( )thejogdialwilldisplaythedetailedsettingsscreen,or executethatfunction.
30 Operating the Video Display
Using the Channel (CH) Button
Youcanassignchannels(varioussettingsrelatedtoinputsignal)totheCHbuttonsonthevideodisplayandswitch channelsinstantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings" "Function/Channel Button" "Display Channel" and press the jog dial to determine the selection. AnewwindowopensanddisplaysbuttonnamesCH1toCH3.
3. Select the name of the button using the jog dial and press the jog dial to determine the selection. TheselectionframemovestonextOSDmenulevel.
4. Select the channel to assign using the jog dial. See"ChannelSettings"( 60)fortheconfigurablesettings.
5. Press the jog dial to determine the selection. Thesettingisconfirmed.
Thefollowingcontentisassignedtochannelbuttonsonthevideodisplaybyfactorydefault.
CH CH1 CH2 CH3
InputConfiguration 3G/HD-SDI HDMI 3G-SDIRAW
SelectInputSignal Automatic Automatic Automatic
ImageDivision Automatic Automatic Automatic
LinkOrder Automatic Automatic Automatic
Format Automatic Automatic Automatic
AudioInput Automatic Automatic Automatic
Marker/TC/CameraInfoInput InputA InputA InputA
InternalSync Off Off Off
ChannelName (Blank) (Blank) (Blank)
PictureModeType Normal Normal Normal
PictureMode PictureModeL Resolution4K
ITU-RBT.709 ITU-RBT.709 CINEMAEOSSYSTEM
PictureModeR Resolution2K
ITU-RBT.709
Payload UHD/PQ User1(2020PQ)
UHD/HLG User2(2020HLG)
UHD ITU-RBT.2020
709/PQ
709/HLG
709 ITU-RBT.709
VANC
Unknown
31Operating the Video Display
CH CH1 CH2 CH3
Camera CINEMAEOS SYSTEM
CINEMAEOSSYSTEM
ARRI User6
VARICAM User7
SingleInputDualView Off Off Off
Separator Off Off Off
Note
HoldingtheCHbuttondowndisplaysthechannellist,allowingtheusertoselectthedesiredchannel.
Checking Signal Information and Status of the Main Unit
Thevideodisplayisequippedwithabannerfunctionwhichdisplayssignalinformationorthestatusofthemainunit.
1. Press the jog dial when the OSD menu is closed. Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwillautomatically disappearafter6seconds.
Note
Youcanselecthowthebannerisdisplayed("Banner" 96).
Youcanmonitortheinputsignalstatus.("SignalMonitoring" 84)
Formoredetailedsignalinformation,pleaserefertothesectionon"SignalInformation"( 101).
The"Detectingsync."bannerwillcontinuetoappearuntiltheinputsignalissynchronized.
32 Operating the Video Display
Operating the video display using an external device [LAN terminal]
ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperatethevideodisplay usinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersandtallylightsonthescreen.Thereare twotallylights,ontheleftandright.Upto16characterscanbedisplayed.
Tallydisplay(left) Characterdisplay Tallydisplay(right)
1. Connect an external control device to the LAN terminal.
2. Set "SCREEN" and "INDEX" to "0x0000" in the TSL Protocol settings.
3. Press the MENU button to open the OSD menu.
4. Select "Network/IMD Settings" "In Monitor Display" and press the jog dial to determine the selection.
5. Select "Control""TSL Ver. 5.00" using the jog dial. Thiswillallowoperationfromanexternalcontroldevice,anddisplaycharactersandtallylights.
6. Select "Position" "Top" or "Bottom" using the jog dial. Thissetsthepositionwherecharactersandtallylightswillbedisplayed.
Note
When"MultiView(Dual)"or"MultiView(Quad)"isdisplayed,setthe"INDEX"settingtofrom"0x0001"to"0x0004".
Theportnumberforthecontrollingisfixedat"45000".
With"InMonitorDisplay"youcanalsodisplayuser-selectedcharactersonthescreen.( 94)
33Operating the Video Display
Operating the video display using an external device [USB terminal: Wi-Fi
connection]
AWi-FiadaptercanbeconnectedtotheUSBterminalofthevideodisplaysothatthevideodisplaycanbeconnected toaportableterminalintheWi-Finetworkenvironmentinuse.Thefollowingtwomethodscanbeusedtoconnect: Infrastructure:ThismethodconnectstoWi-Fiviaanaccesspoint. AccessPoint:Thisdeviceactsasanaccesspoint,andthismethodconnectsthedevicedirectlytotheWi-Fidevice. NetworksettingssuchasIPaddressandsubnetmaskareacquiredautomatically.
Supportedencryptionschemes Infrastructure:WEP64(ASCII),WEP128(ASCII),WPA-TKIP,WPA-AES(CCMP),WPA2-TKIP,WPA2-AES(CCMP) AccessPoint:WPA2-AES(CCMP)
CAUTION
Notethatwecannotacceptanyliabilityfordamagesthatariseasaresultofincorrectsettingsmadeonthenetworktouse networkfunctionsandfordamagethatariseasaresultofuseofthisfunction.
AvoidconnectingtoWi-Fiornetworkenvironmentsthatarenotprotectedbyappropriatesecuritymeasures.Rememberto changethedefaultpasswordwhensettingtheaccesspoint.Doingsomaycausethecustomerspersonalinformationor otherimportantinformationtoleaktoathirdparty.WhennotusingWi-Fi,set"Wi-Fi""Control"to"Off".
ThespecificationsandrestrictionsofWi-FiconnectionmethodsdifferdependingontheWi-Finetworkinuse.
ThereisnoguaranteethattheWi-Fiadapterfunctionsinusewillworkonthevideodisplay.ForinformationaboutWi-Fi adapterrelateddefects,contactthedevicemanufacturer.Also,invariouscountriesandregions,approvalisneededto usetheWi-Fiadapter,anduseofnon-approvedWi-Fiadaptersisnotpermitted.Ifyouareunclearofwhetherornotuseis approved,checkwiththedevicemanufacturer.
Note
RefertotheCanonwebsiteforalistofsupporteddevices(Wi-Fiadapters).
FordetailsonhowtousetheWi-Fiadapter,precautionsforuse,howtosetaccesspoints,andotherinformation,either refertothedeviceInstructionManualorcontactthemanufacturer.
Upto24accesspointscanbedisplayedandselectedonthevideodisplay.
1. Connect the Wi-Fi adapter to the USB terminal.
2. Press the MENU button to open the OSD menu.
3. Select "Network/IMD Settings" "Wi-Fi", and press the jog dial to determine the selection.
When using the "Infrastructure" method
4. Select "Control" "Infrastructure" using the jog dial.
5. Set the access point to connect to.
6. If a password is needed when connected to an access point, enter the password ( 93). Thisissetusingupto24alpha-numericalcharactersandsymbols.Thefollowingcharacterscanbeentered.
Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-
34 Operating the Video Display
When using the "Access Point" method
4. Select "Control" "Off" using the jog dial.
5. Select "Access Point" using the jog dial ( 93). EntertheSSID.Thisissetusingupto24alpha-numericalcharactersandsymbols.
Setsthecommunicationmode.
Setsthechannel.
Enterthepassword.Thisissetusingbetween8and24alpha-numericalcharactersandsymbols.
"SSID","Password":Thefollowingcharacterscanbeentered.
Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-
6. Select "Control" "Access Point" using the jog dial.
35Operating the Video Display
Use a web browser to remotely operate the video display
AwebbrowsercanbeusedtoremotelyoperatethevideodisplayusingacomputerterminalconnectedtotheLAN terminaloraportableterminal( 33)connectedviaaWi-FiadaptertotheUSBterminal.Fromthedeviceconnectedto thenetwork,youcanchangeimagequalitysettingsorswitchchannels. Thisfunctionchecksoperationusingthefollowingwebbrowsers. Safari(Apple)
GoogleChrome(Google)
*CorrectoperationcannotbeguaranteedonallsupportedOSorwebbrowsereditions.
CAUTION
RemembertochangetheinitialsettingsforIDandPasswordwhenusingthisfunction.
Note
Accessisonlypossiblefromasingleterminal.
ThisfunctionmaynotworkifthevideodisplayisaccessedusingLANandaWi-Fiadapter,atthesametime.
Openingmultiplepagesinmultipletabsonthewebbrowsercancauseittonotfunctionproperly.
Executing"Capture"inthe"View"screencancausethevideoonthisvideodisplaytopausetemporarily.
Operatingthevideodisplayitselfwhileitisbeingaccessedfromawebbrowsercancausethenetworkconnectiontobe lost.
Adelaymayoccurinvideodisplayorinthevarioussettingsdependingonthenetworkenvironmentandcommunication conditions.
TheIPaddresscanbecheckedinthe"SystemInformation"screen.
TheoperationscreenonlydisplaysEnglish.
1. Connect external control devices via the network.
2. Press the MENU button to open the OSD menu.
3. Select "Network/IMD Settings" "Web", and press the jog dial to determine the selection.
4. Select "Control" "On" using the jog dial.
5. Select "User ID" and "Password" using the jog dial ( 93). UserID:EntertheuserID.Thisissetusingupto16alpha-numericalcharactersandsymbols.
Password:Enterthepassword.Thisissetusingbetween8and16alpha-numericalcharactersandsymbols. Thefollowingcharacterscanbeentered. Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:_or-
6. Start up a web browser on the device connected to a network.
7. Enter the IP address of this video display in the address bar. Theremoteoperationscreenisdisplayedonthewebbrowser.
Whenthebasicauthenticationscreenisdisplayed,entertheuserIDandpassword.
8. When operation ends, close the web browser.
36 Operating the Video Display
Operation screen
"View" screen Afterpressingtheimagecapturebutton,thecapturedimagewillbedisplayed.YoucanalsooperatetheCHbuttons andFbuttons(function/channelbuttons).
"Control" screen AllowsthePictureMode,Channel,andvariousmarkerdisplaystobeset.
"Name/ID/Password" Enterthetext. Get:Getthetextdatatobeentered. Set:Applythetextdatatothetextinputscreen.
"Zoom/PixelValue" Setsthedisplaypositionfor"Zoom"orthepixel positionfor"PixelValueCheck".
"Setting" screen YoucanimportLUT,export"FrameLuminanceMonitor",andimportorexportthisvideodisplay'ssettings.
"LUTImport(UserLUT)" ImportsaLUT.WhentheLUTimportiscompleted,the settingoftheimportedLUTwillbeappliedtothecurrent "PictureMode"'s"CDL/UserLUT".
"FrameLum.MonitorExport" Exports"FrameLuminanceMonitor".Exporting"Frame LuminanceMonitor"willcreatea"latest.csv"fileforthe luminanceinthefinalscreenandan"all.tar.gz"file(afile compressedusingthetar.gzmethod)thatcontainsall acquiredluminanceinformation.
Capturedimage
Imagecapturebutton
37Operating the Video Display
"lnformation" screen Displaysthesettingsfor"Adjustment"and"ChannelSettings",andinformationfor"SignalInformation"and"System Information".
"Link" screen YoucandisplayalistofthedisplayconnectedviaLANtothisvideodisplay,set"DisplaySettingLink",andchange thedisplaynames.
38 OSD Menu
OSD Menu OSD Menu Index Adjustment( 45)
PictureMode
Contrast
Brightness
Chroma
Sharpness
BacklightControl
ColorTemperature
ColorGamut
Gamma/EOTF
HDRRange
InputTransform
OutputTransform
OutputTransformSurround
ColorRange
CDL/UserLUT
CDL/UserLUT
Power
Saturation
Offset
Slope
CDL/UserLUTBypass
DetailSettings
CDLExport
CDLImport
CDLPresetName
AnchorCDL
ResetCDL
DetailSettings
BoostContrast
LUTImport
LUTName
LUTDelete
YCbCrColorMatrix
2020ConstantLuminance
2020GamutMapping
HybridLog-GammaSystem
HDR/SDRView
Calibration
HDMILink
39OSD Menu
CopyPictureMode
PictureModeName
AnchorAdjustment
Reset
ChannelSettings( 60)
SelectChannel
InputConfiguration
SelectInputSignal
ImageDivision
LinkOrder
Format
AudioInput
Marker/TC/CameraInfoInput
InternalSync
ChannelName
PictureMode
SingleInputDualView
Separator
DisplaySettings( 66)
ScreenScaling
Anamorphic
ScalingMethod
VideoPosition(MultiView)
Zoom
ZoomPreset
Magnification
Position
Type
FrameHold
BackgroundColor
I/PsF
PsF
I/PConversion
FilmCadence
AudioSettings( 70)
SDIGroup
CHL/R(SDI)
CHL/R(HDMI)
Volume
AudioSwitch
40 OSD Menu
MarkerSettings( 71)
MarkerPreset
AspectMarker
Enable
Mask
AspectRatio
Line
LineWidth
LineColor
LineBrightness
HPosition
VPosition
SafetyZoneMarker1,2
Enable
AspectRatio
AreaSize
Rate(%)
Width(dot)
Height(dot)
Shape
LineWidth
LineColor
LineBrightness
HPosition
VPosition
AreaMarker
Enable
HPosition
VPosition
Width(dot)
Height(dot)
Mask
Line
LineWidth
LineColor
LineBrightness
CenterMarker
Enable
Size
LineWidth
LineColor
LineBrightness
41OSD Menu
GridMarker
Enable
Distance
LineWidth
LineColor
LineBrightness
FunctionSettings( 76)
TimeCode
Enable
Type
Size
Position
HOffset
TypeStringDisplay
Brightness
AudioLevelMeter
Enable
ChannelNumber(SDI)
ChannelNumber(HDMI)
Size
PeakHold
ReferenceLevel
Brightness
WaveFormMonitor
Enable
SelectSignal
DisplayType
SelectLine
Scale
ReferenceLine
ReferenceLevel
ReferenceLevelHigh
ReferenceLevelLow
Color
Position
Size
VectorScope
Enable
Target
Position
Size
42 OSD Menu
Histogram
Enable
Color
Gain
HDRRange
HDR/SDRRatio
Peak/Ave.Luminance
Size
FrameLuminanceMonitor
Enable
Display
LuminanceGraphSettings
HDR/SDRRatioGraphSettings
Size
Reset
Export
PixelValueCheck
Enable
HPosition
VPosition
ResetPosition
TestPattern
SignalMonitoring
Control
ErrorHold
NoSignal/UnsupportedSignal
2SILinkOrder
ErrorLog
ScreenCapture
Capture
FrameHold
CaptureSource
FileType
CreateHDR/SDRCompareFile
PlaybackFile
FinishPlaybackFile
CameraLink
AutomaticAdjustment(CINEMAEOS)
ColorGamut/Gamma/EOTF
ColorTemperature
DisplayColorGamut
AutomaticAdjustment(ARRI)
UserLUT
43OSD Menu
AutomaticAdjustment(VARICAM)
UserLUT
Anamorphic
AreaMarker
Fan
CameraInformation
PictureFunctionSettings( 89)
Peaking
Enable
Monochrome
Frequency
Range
Color
FalseColor
Enable
Type
HDR/SDRBorder
Range-SDR
Range-HDR
OverRange
Enable
Range(HDR/SDR)
2020OutsideofGamutView
Enable
ColorGamut
Range
Monochrome
BlueOnly
RedOff
GreenOff
BlueOff
BacklightScan
CompareView
Enable
Type
HDR/SDRConvertMethod
Contrast(SDR)
ColorTemperature(SDR)
Gain(SDR)
UserLUTTarget1
44 OSD Menu
Network/IMDSettings( 93)
LAN
Wi-Fi
Web
DisplaySettingLink
InMonitorDisplay
SystemSettings( 95)
Function/ChannelButton
DisplayFunction
DisplayFunction(CDL)
DisplayChannel
Language
Date/Time
DisplayName
OSDSettings
Banner
FunctionButtonGuide
OSDPosition
OSDSize
ProtectSettings
Password
ProtectTarget
Protect
PowerIndicator/ButtonLEDSettings
PowerIndicatorBrightness
DisplayButtonLED
ButtonNameLightingTime(sec.)
FanSettings
FanControl
FanStop
CompatibleSettings
HDMI
ColorRange
Firmware/LicenseUpdate
Export/Import
PoweronSetting
ResetAllSettings
SignalInformation( 101)
SystemInformation( 101)
45OSD Menu
Adjustment
ThismenuisusedtoadjusttheimagequalityandperformcalibrationwithoutaPC.Thefactorydefaultsdiffer accordingtothe"PictureMode"setting.( 57)
Item Setting Options (underline indicates factory default)
PictureMode
Selectapresetmode. SMPTE-C,EBU,ITU-R BT.709,ITU-R BT.2020,Adobe RGB,DCI-P3:Modesettothe brightness,colortemperature,gamma/EOTF,andcolorgamutofthethreeprimarycolors chromaticitypointsofeachstandard. User 1-7 (User 1 (2020 PQ), User 2 (2020 HLG), User 3 (DCI PQ), User 4 (DCI PQ D65), User 5 ~ User 7):Custommodes.Seteachitemof"Adjustment".Youcanchangethemodename within24one-bytecharactersincludingalphabeticalcharacters,numbers,andsymbols( 56). CINEMA EOS SYSTEM:CanonLogisidealwhenviewingimagecapturedwithCinemaEOS camera/videocamera.UsingCameraLink,youcanhavetheimagequalitysettingchange automatically("AutomaticAdjustment(CINEMAEOS)" 85). ACESproxy (ver. 1.0.1):AmodetodisplayACESproxyvideosinoptimumgamma/EOTFandcolor gamut.
Note
"ACESproxy(ver.1.0.1)"cannotbesetwhen"ChannelSettings""PictureMode""Type" are"L/R","4K/2K"or"Automatic".
Contrast Adjuststhewhiteleveloftheimage.(Incrementsof1) 0to1500 When"BoostContrast"in"DetailSettings"issetto"On",thesettablerangeisshownbelow. When"BoostContrast"is"On","Contrast[BOOST]"isdisplayed.
1500to4000
Note
When"ChannelSettings""PictureMode""Type"is"L/R","Contrast"cannotbeadjusted atthe"PictureMode"settingfortherightscreen.Therightscreen'ssettingwillbethesame assetfortheleftscreen.
Brightness Adjuststheblackleveloftheimage.(Incrementsof1) -500to500
Chroma Adjuststhecolorsaturationoftheimage(colordepth).(Incrementsof1) 0to2000
Note
Canonlybeadjustedwhen"CDL/UserLUT"is"CDL1-8"or"Off".
Sharpness Adjuststhesharpnessoftheimage.(Incrementsof1) 0to100
46 OSD Menu
Item Setting Options (underline indicates factory default)
BacklightControl Switchesthebacklightcontrolmethod. Local Dimming (Auto, High, Low):Localdimmingtechnologycontrolstheamountoflightemitted bythebacklightforeachdisplayarea.Thebacklightofbrightareaisincreasedandthedarkareais decreasedaccordingtothedisplayedcontent. When"Auto"isset,theamountoflightisautomaticallycontrolledaccordingtothecontrastvalue. Increasingthecontrastvaluemakesthebacklightdarkerindarkportionsoftheimageascompared to"High"/"Low". Global Dimming:Globaldimmingistheabilitytocontroltheamountoflightemittedbythe backlightontheentirescreen.Iftheimageisdark,thewholedisplayisdarkened. Off:Nobacklightdimmingisapplied.
Note
When"GlobalDimming"isselected,thecontrastmaychangetemporarilyinordertomaintain gradationdependingontheimage.Ifthisisundesirable,turnit"Off"andseeifitimproves.
When"BoostContrast"issetto"On","BacklightControl"turnsto"Off".
When"ChannelSettings""PictureMode""Type"is"L/R","BacklightControl"cannot besetatthe"PictureMode"settingfortherightscreen.Therightscreen'ssettingwillbethe sameassetfortheleftscreen.
ColorTemperature Setsthecolortemperature. D93, D65, D61, D60, D56, D50, DCI-P3:Selectfrompresetcolortemperatures. D65 Custom:Thispresetisforadjustingthecolorofthevideodisplayanddisplayshavingdifferent displaycharacteristics.ThegainandbiasareadjustedbasedonD65. Gain R/G/B, Bias R/G/B:Canbeadjustedinincrementsof1whenapresetcolortemperatureis selected. Gain R/G/B: 0to1023 Bias R/G/B: -500to500 Custom (xy):YoucanadjustCIEx,yinincrementsof0.001. x: 0.260to0.360 y: 0.260to0.360 Off:Colortemperatureisnotset.
Note
"Custom(xy)"and"GainR/G/B"or"BiasR/G/B"cannotbeselectedatthesametime.
When"GainR/G/B"or"BiasR/G/B"valueisadjusted,anasterisk"*"isdisplayedbycolor temperaturepresetmode.
Thedisplayedcolorcoordinates(x,y)arejustaguideandnotguaranteedabsolutevalues.
47OSD Menu
Item Setting Options (underline indicates factory default)
ColorGamut Colorgamutcanbeselectedwhen"User1-7"or"CINEMAEOSSYSTEM"isselectedfor"Picture Mode". SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3:Colorgamutcompliantto eachstandard. Native:Colorgamutthatcanbedisplayedbythisvideodisplay. Cinema Gamut to 709, Cinema Gamut to 2020, Cinema Gamut to DCI, DCI-P3+ to 709, DCI-P3+ to DCI:ModeswherethecolorgamutisconvertedtomonitorCinemaGamutand DCI-P3+videosrecordedbytheCINEMAEOSSYSTEMcameras. S-Gamut3 to 709, S-Gamut3 to 2020, S-Gamut3 to DCI, S-Gamut3.Cine to 709, S-Gamut3.Cine to 2020, S-Gamut3.Cine to DCI:Presetmodeswherethecolorgamutis converted. Gamut LUT 1 to Gamut LUT 8:SelectsanexternalLUT.
Note
"ColorGamut"cannotbesetinthefollowingcases.
- When"CDL/UserLUT""ARRI(Rec2100-PQ-1K-100)","ARRI(Rec2100-HLG-1K-200)", "VARICAM(V-LogtoV-709)","2020PQto2020SDR","2020PQto709SDR","2020HLG to709HLG"or"2020HLGto709SDR"isselected.
ForcheckingthevideocapturedwithCinemaEOScameras,pleaserefertothe"Parameterof CinemaEOScamerasandDP-V2410( 85)"in"Adjustment".
Gamma/EOTF SetstheGamma/EOTF. 1.0, 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886, Canon Log, Canon Log 2, Canon Log 3, S-Log2 (HDR), S-Log3 (HDR):Selectthepresetgamma. SMPTE ST 2084 (PQ), Hybrid Log-Gamma, Hybrid Log-Gamma RGB, Canon Log (HDR), Canon Log 2 (HDR), Canon Log 3 (HDR):Selectthegamma/EOTFforHDRdisplay. Gamma LUT 1 to Gamma LUT 8:SelectsanexternalLUT. Off:Gammaisnotset.
Note
About"HybridLog-Gamma"
- Thisvideodisplaysupportsthefollowingtwomethods. "HybridLog-Gamma":ThismethodprocessesthesystemgammafortheYsignal (CompliantwithITU-RBT.2100). "HybridLog-GammaRGB":ThismethodprocessesthesystemgammafortheRGBsignal.
- Ifusing"HybridLog-Gamma"thenthesystemgammavaluewillbedisplayedinthe"Setting Options"onthemenuscreen.
Notsettableinthefollowingcases:
- When"ACESproxy(ver.1.0.1)"isselectedin"PictureMode" - When"CDL/UserLUT""ARRI(Rec2100-PQ-1K-100)","ARRI(Rec2100-HLG-1K-200)", "VARICAM(V-LogtoV-709)","2020PQto2020SDR","2020PQto709SDR","2020HLG to709SDR"isselected.
ForcheckingthecapturedvideowithCinemaEOScamerasandARRI/Panasoniccinema cameras,pleasereferto"CameraLink""AutomaticAdjustment"( 85).
48 OSD Menu
Therelationshipbetween"ColorGamut"and"Gamma/EOTF"thatcanbeselectedisshownbelow.When"ColorGamut"is changed,"Gamma/EOTF"ischangedtotheunderlinedvalue(defaultvalue)whenthecurrent"Gamma/EOTF"settingsarenot selectable.
PictureMode ColorGamut SelectableGamma/EOTF
SMPTE-C Cannotbeselected Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),GammaLUT1toGammaLUT8
EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),GammaLUT1toGammaLUT8
ITU-RBT.709, ITU-RBT.2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ), HybridLog-Gamma,HybridLog-GammaRGB,CanonLog,CanonLog(HDR), CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR), S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8
AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3, CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8
CINEMAEOS SYSTEM, User1-7
SMPTE-C Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),GammaLUT1toGammaLUT8
EBU Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),GammaLUT1toGammaLUT8
ITU-RBT.709, ITU-RBT.2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog- Gamma,HybridLog-GammaRGB,CanonLog,CanonLog(HDR),CanonLog2, CanonLog2(HDR),CanonLog3,CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR), GammaLUT1toGammaLUT8
AdobeRGB Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
DCI-P3 Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog, CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3 (HDR),S-Log2(HDR),S-Log3(HDR),GammaLUT1toGammaLUT8
Native Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),GammaLUT1to GammaLUT8
CinemaGamutto709, CinemaGamutto2020
2.2,CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3, CanonLog3(HDR)
CinemaGamuttoDCI CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3, CanonLog3(HDR)
DCI-P3+to709, DCI-P3+toDCI
CanonLog,CanonLog(HDR)
S-Gamut3to709 S-Gamut3to2020 S-Gamut3.Cineto709 S-Gamut3.Cineto2020
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ), HybridLog-Gamma,HybridLog-GammaRGB,S-Log2(HDR),S-Log3(HDR), GammaLUT1toGammaLUT8
S-Gamut3toDCI S-Gamut3.CinetoDCI
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),S-Log2(HDR), S-Log3(HDR),GammaLUT1toGammaLUT8
GamutLUT1toGamut LUT8
Off,1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,GammaLUT1toGammaLUT8
49OSD Menu
Item Setting Options (underline indicates factory default)
HDRRange SetsthedisplaymethodwhenGamma/EOTFforHDRdisplayisselected. SMPTE ST 2084 (PQ):Setsthe"SMPTEST2084(PQ)"dynamicrangetobedisplayed,from0.005
to10,000cd/m2(nits).(100to4000:100increments.4000to10000:1000 increments) 100 to 10000 (1000)
Hybrid Log-Gamma, Hybrid Log-Gamma RGB:Setshowfartodisplaythe"HybridLog-Gamma"dynamicrange.
(inincrementsof100) Theupperlimitvaluewillchangetomatchthesettingsof"HybridLog- GammaSystem".( 54) Hybrid Log-Gamma: 100 to 1000 Hybrid Log-Gamma RGB: 100 to 1000/2000
Canon Log (HDR):Setsthe"CanonLog"dynamicrangetobedisplayed,from0to800%.(in100 increments) 100 to 800
Canon Log 2 (HDR):Setsthe"CanonLog2"dynamicrangetobedisplayed,from0to1600%.(in 100increments) 100 to 1600
Canon Log 3 (HDR):Setsthe"CanonLog3"dynamicrangetobedisplayed,from0to1600%.(in 100increments) 100 to 1600
S-Log2 (HDR), S-Log3 (HDR):Setshowfartodisplaythe"S-Log"dynamicrange. (in100increments) S-Log2 (HDR): 100to1400 (1000) S-Log3 (HDR): 100to3900 (1000)
Gamma LUT 1 to Gamma LUT 8:Setshowfartodisplaythe10-bitLUTdatadynamicrange,from 0to1023.(in1increments) 512 to 1023
Settingprocedures TheproceduresbelowuseCanonLog(HDR)asanexample. Whenthemaximumvalue(800%)isspecified,the800%dynamicrangeofCanonLogisassigned tothedynamicrangeofthevideodisplay.Althoughthebrightnessinappearancelowers,youcan checkthedynamicrangeincludedinvideosignals.When400%isspecified,partexceeding400% isclipped(gradationissaturated)andpartupto400%isassignedtothedynamicrangeofthevideo display. ThebrightnessofthevideodisplaycorrespondstothevaluesetforContrast.
800%
400%
800%
400% 400%
Canon Log 800% signal
(Contrast: 4000)
CanonLog(HDR):Setto800 CanonLog(HDR):Setto400
CanonLog range
CanonLog range
DP-V2410 range
DP-V2410 range
Gradationisreproducedbyassigning therangetotherangeoftheDP-V2410 (whichlowersthebrightness).
Clip(Saturates gradation.)
Brightness value corresponding tothecontrast setting
50 OSD Menu
Item Setting Options (underline indicates factory default)
InputTransform SetswhetherornottoapplyACESInputTransformto"3G-SDIRAW"signals( 60)when "ACESproxy(ver.1.0.1)"isselectedfor"PictureMode". Automatic:Appliedautomatically. Off:Notapplied.
OutputTransform Thisisdisplayedinsteadof"Gamma/EOTF"and"ColorGamut"when"ACESproxy(ver.1.0.1)"is selectedfor"PictureMode". ITU-R BT.709, ITU-R BT.2020, DCI-P3:ACESproxyisconvertedintorespectivemode.
OutputTransform Surround
Thisisdisplayedinsteadof"Gamma/EOTF"and"ColorGamut"when"ACESproxy(ver.1.0.1)"is selectedfor"PictureMode". Dim Surround:EnablesDimSurroundprocessspecifiedbyACESproxy. Dark Surround:EnablesDarkSurroundprocessspecifiedbyACESproxy.
51OSD Menu
Item Setting Options (underline indicates factory default)
ColorRange Setsthequantizationrange. Automatic:Setstherangebasedonsignalinformationautomatically.
When"ColorRange"issetto"Normal"( 97)
Full, SDI Full (4-1019), Limited
When"ColorRange"issetto"Compatible"( 97)
Full (0-1023), SDI Full (4-1019), Limited 1 (64-940), Limited 2 (64-1023)
Note
Settingisdisabledwhen"ACESproxy(ver.1.0.1)"isselectedfor"PictureMode".
Operationswhen"Automatic"isselectedaredescribedbelow.
- ItissetinaccordancewiththesettingsifColorRangesettingsareincludedinthecamera metadata.Whenthereis"FullRange"metadatainPayloadwhenSDIisselected,itwillbe setto"SDIFull".
- WhenHDMIisselected,"Full"or"Limited"("Full(0-1023)"or"Limited1(64-940)")is automaticallysetaccordingtotheHDMIsignalinformation.
- WhenSDIisselected,thesettingisconfiguredaccordingtothesettingsforPictureMode, ColorGamut,andGamma/EOTF.
SettingOptions
ColorRangetobeSet
"SystemSettings""CompatibleSettings" "ColorRange"
When"Normal" When"Compatible"
PictureMode DCI-P3
Full Full(0-1023)
ColorGamut
DCI-P3
CinemaGamuttoDCI
DCI-P3+toDCI
Gamma/EOTF
CanonLog(HDR)
CanonLog2(HDR)
CanonLog3(HDR)
S-Log2(HDR)
S-Log3(HDR)
CanonLog
Limited Limited2(64-1023)CanonLog2
CanonLog3
Otherthantheabove Limited1(64-940)
Operationswhen"Format"issetto"ICtCp"aredescribedbelow.
- When"ColorRange"issettootherthan"Full","WaveFormMonitor"willdisplayonlya signalsetwith"ColorRange".
- If"ChannelSettings""PictureMode""Type"is"L/R",therightscreen's"ColorRange" settingforthefollowingwillbethesameassetfortheleftscreen: -Whendisplayingasingleterminalsinputinfull-screen -Whendisplaying"2SampleInterleave"or"DualLink3G-SDI"signals
52 OSD Menu
Item Setting Options (underline indicates factory default)
CDL/UserLUT ConfiguressettingsforCDLorUserLUT. CDL/User LUT:SelectapresetsuchasCDLorexternalLUT.
CDL 1 to CDL 8, User LUT 1 ~ User LUT 8, Off Onlywhen"PictureMode"issetto"User1-7" ARRI (Rec2100-PQ-1K-100), ARRI (Rec2100-HLG-1K-200), VARICAM (V-Log to V-709), 2020 PQ to 2020 SDR, 2020 PQ to 709 SDR, 2020 HLG to 709 HLG, 2020 HLG to 709 SDR
Power:AdjuststheGammaoftheimage.(0.01increments) 0.50 to 4.00 (1.00)
Saturation:Adjuststhecolorsaturationoftheimage.(0.001increments) 0.000 to 2.000 (1.000)
Offset:Adjuststheblackleveloftheimage.(0.001increments) -1.000 to 1.000 (0.000)
Slope:Adjuststhewhiteleveloftheimage.(0.001increments) 0.000 to 2.000 (1.000)
CDL/User LUT Bypass: When"CDL"isselected:Whensetto"On",youcantemporarilydisabletheCDLadjustment
resultandreturntopreviouslysetimagequality. When"UserLUT"isselected: Whensetto"On",youcanreturntotheimagequalitybefore
userLUTwasapplied. On, Off
Detail Settings CDL Export:ExportsCDLparameters.
CDL Preset (CDL 1 to CDL 8, All ), File Type (CCC, CDL), Execute CDL Import:ImportsCDLparameters.
Filename, CDL Preset (CDL 1 to CDL 8), Execute CDL Preset Name:Youcanspecifythenameofpresetmodewithin16one-bytecharacters
includingalphabeticalcharacters,numbers,andsymbols. Anchor CDL:Youcantemporarilysaveparametersfor"Power","Saturation","Offset",and"Slope"
andrecoverthevalues.(anchorpointsetting) Reset CDL:ResetsCDLparameters.
Note
Whenasettingotherthan"CDL1-8"isselected,thefollowingfunctionscannotbeset.
- "Power","Saturation","Offset","Slope","DetailSettings","AnchorCDL","ResetCDL". When"ARRI(Rec2100-PQ-1K-100)"isselected,"HDRRange""SMPTEST2084(PQ)" settingsbecome"1000".
When"ARRI(Rec2100-HLG-1K-200)"isselected,"HDRRange""HybridLog-Gamma" settingsbecome"1000".
53OSD Menu
Item Setting Options (underline indicates factory default)
CDL/UserLUT Dependingonthe"UserLUT"settings,"ColorGamut"and"Gamma/EOTF"willbethesameas setbelow.
UserLUT ColorGamut Gamma/EOTF
ARRI(Rec2100-PQ-1K-100) ITU-RBT.2020 SMPTEST2084(PQ)
ARRI(Rec2100-HLG-1K-200) ITU-RBT.2020 HybridLog-Gamma
VARICAM(V-LogtoV-709) ITU-RBT.709 2.2
2020PQto2020SDR ITU-RBT.2020 2.4
2020PQto709SDR ITU-RBT.709
2020HLGto709HLG ITU-RBT.709
2020HLGto709SDR ITU-RBT.709 2.4
"CDL/UserLUTBypass":Fixedat"Off"when"PictureFunctionSettings""CompareView" "Enable"issetto"On".
DetailSettings SetsdetailsforPictureMode.
Boost Contrast
Youcanincreasethebrightness. Theupperlimitfor"Contrast"settingsvarydependingonthe"BoostContrast"settings. On:Thesettingsfor"Contrast"arefrom1500to4000. Off:Thesettingsfor"Contrast"arefrom0to1500.
Note
ItisnotpossibletosetthefunctionafterselectingPictureModewhentherightscreenis selected.Therightscreen'ssettingwillbethesameassetfortheleftscreen.
When"Off"isselected,"HDR/SDRView"alsobecomes"Off".
LUTImport YoucanimportLUT.Filenamesthatcanbeimportedcanbeupto48one-bytecharacters,including alphabeticalcharacters,numbers,andsymbols(includingfileextensions). Filename:Selectafilename. LUT Type (User LUT, Gamma LUT, Gamut LUT):SelecttheLUTtype. Select LUT:SelectsUserLUT/GammaLUT/GamutLUT1-8. Base Color Gamut(SMPTE-C, EBU, ITU-R BT.709, Adobe RGB, DCI-P3, Native):Selectsthe colorgamutusedwhencreatingtheLUT(when"GamutLUT"under"LUTType"isselected). Execute:Performsimport.
LUTName YoucanspecifythenameofLUTwithinone-byte24charactersincludingalphabeticalcharacters, numbers,andsymbols. LUT Type (User LUT, Gamma LUT, Gamut LUT):SelecttheLUTtype. Select LUT:SelectsUserLUT/GammaLUT/GamutLUT1-8. Input Name:InputtheLUTname.
LUTDelete DeletesimportedLUT. LUT Type (User LUT, Gamma LUT, Gamut LUT):SelecttheLUTtype. Select LUT:SelectsUserLUT/GammaLUT/GamutLUT1-8. Delete:DeletesLUT.
YCbCrColor Matrix
SetsthematrixconversionmethodforinputsignalsinYCbCrformat. Automatic:MatrixcoefficientissetinconformancewiththeITU-RBT.2020standardwhenthe
"PictureMode"or"ColorGamut"settingis"ITU-RBT.2020"andinconformancewith theITU-RBT.709standardotherwise.
ITU-R BT.709:MatrixcoefficientissetinconformancewiththeITU-RBT.709standard. ITU-R BT.2020:MatrixcoefficientissetinconformancewiththeITU-RBT.2020standard.
54 OSD Menu
Item Setting Options (underline indicates factory default)
2020Constant Luminance
Setsthecolormatrixconversionmethodtobeusedwhen"ITU-RBT.2020"isselectedfor"Picture Mode"or"ColorGamut". Constant Luminance:YUVsignalsarelinearlyconvertedandthenconvertedintoRGBsignals. Non-constant Luminance:YUVsignalsareconvertedintoRGBsignalswithoutchanginggamma
0.45.
Note
SD-SDIisfixedto"Non-constantLuminance".
If"ChannelSettings""PictureMode""Type"is"L/R","2020ConstantLuminance"isfixed at"Non-constantLuminance"forthefollowing.However,if"ColorGamut"fortheleftandright screensis"ITU-RBT.2020",thentherightscreen'ssettingwillbethesameassetfortheleft screen.
- Whendisplayingasingleterminalsinputinfull-screen - Whendisplaying"2SampleInterleave"or"DualLink3G-SDI"signals
2020Gamut Mapping
Setthisitemwhen"ITU-RBT.2020"isselectedfor"PictureMode"or"ColorGamut". Gamut Mapping:MappingisperformedoncolorsoutsidethenativecolorgamutbyCanon's
uniquemethod. Clipping:Colorsoutsidethenativecolorgamutareclippedbyageneralmethod.
HybridLog- GammaSystem
Setsthesystemgammaorpeakluminancewhenselecting"HybridLog-Gamma"or"HybridLog- GammaRGB"in"Gamma/EOTF". Automatic:When"HybridLog-Gamma"isselected,itadjuststhesystemgammaautomaticallyto matchthecontrastvalue.Itcannotbesetwhen"HybridLog-GammaRGB"isselected. Manual:Operationsforwhen"HybridLog-Gamma"or"HybridLog-GammaRGB"isselectedareas follows:
When "Hybrid Log-Gamma" is selected:Adjuststhesystemgamma.
1.000 to 1.500 (1.200, 0.005 increments)
When "Hybrid Log-Gamma RGB" is selected:Setsthepeakluminance.Themaximum valueforeachsettingbecomestheupperlimitvalueof"HDRRange". 1.2 - 1000 cd/m2, 1.2 - 2000 cd/m2
HDR/SDRView TheHDR(HighDynamicRange)andSDR(StandardDynamicRange)displayscanbecompared. On:"Contrast"inthescreenontherightisadjustedtothebrightnessforSDR. Off:DoesnotcomparetheHDRandSDRdisplay.
Note
Thiscannotbesetwhenthe"PictureMode"settingfortheleftandrightscreensisthesame.
When"On"isselected,"BoostContrast"alsobecomes"On".
55OSD Menu
Item Setting Options (underline indicates factory default)
Calibration Performscalibrationbasedonsettargetvalueswhen"User1-7"isselectedfor"PictureMode". Luminance:Setsthetargetluminance. 48 to 150 (100) cd/m2
Color Temperature:Setsthetargetcolortemperature. D93, D65, D61, D60, D56, D50, DCI-P3:Selectfrompresetcolortemperatures. Custom (xy):YoucanadjustCIEx,yinincrementsof0.001. x: 0.260 to 0.360 (0.313)/y: 0.260 to 0.360 (0.329) Color Gamut:Setsthecolorgamut. SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3 Gamma:Setsthetargetgamma. 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886 Start:Performscalibration.
Note
When"Luminance"issettohighbrightness,itmaybecalibratedbeyondthebrightness adjustmentrangeandsetlowerthanthetargetvalue,dependingonthe"ColorTemperature" setting.Inthatcase,setthe"Luminance"again.
Calibrationcannotbeexecutedin"PictureMode"fortherightscreen.
56 OSD Menu
Item Setting Options (underline indicates factory default)
HDMILink When"User1-7"isselectedfor"PictureMode",videoisdisplayedattheimagequalitylinkedtothe videoimagequalitysettingusingtheHDMImetadata. Automatic Adjustment
On, Off Color Gamut/Gamma/EOTF:Matchesthe"ColorGamut"and"Gamma/EOTF"settingsofthe
videodisplaywiththeHDMImetadata. On, Off
Contrast/HDR Range:Matchesthe"Contrast","HDRRange",and"BoostContrast"settingofthe videodisplaywiththeHDMImetadata. On, Off
Note
ParameterofHDMImetadataandVideoDisplay
HDMImetadata Videodisplaysetting
ColorGamut BT.709 ITU-RBT.709
BT.2020 ITU-RBT.2020
Gamma/EOTF
TraditionalSDR 2.2
PQ PQ
HybridLog-Gamma HybridLog-Gamma
Cannotset"HDMILink"when"ChannelSettings""PictureMode""Type"is"L/R".
Copy PictureMode
When"User1-7"isselectedfor"PictureMode",thecontentoftheselectedpicturemodeiscopied. Thefollowingmodescanbeselected: Picture Mode (Copy from):SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, User 1-7 (other than the currently set parameter) Execute:Performscopy.
Note
In"PictureMode"otherthan"User1-7",theresultsofcalibrationperformedatthefactoryare copied.
Picture ModeName
Youcanchangethenameof"User1-7"within24charactersincludingalphabeticalcharacters, numbers,andsymbols.
AnchorAdjustment Temporarilysavesparametersforadjusting"Contrast","Brightness","Chroma","Sharpness",and "HDRRange"andrecoverthevalues(anchorpointsetting). OK:Performsanchorpointsetting. Cancel:Returnstothepreviousscreenwithoutsettinganchorpoint.
Reset Return"PictureMode"tofactorydefault.Notethatin"User1-7"modewhereyouareperforming calibration,thesettingreturnstothevalueaftercalibrationinsteadofthefactorydefault. Whenselected,themessage"ResetAdjustmentsettingstodefaults?"appears. OK:Performsreset. Cancel:Returnstothepreviousscreenwithoutresetting.
57OSD Menu
Thefactorydefaultsettingsforeach"PictureMode"isasfollows:
Item SMPTE-C EBU ITU-R BT.709
ITU-R BT.2020
Adobe RGB
DCI-P3
Contrast 1000 1000 1000 1000 1000 480
Brightness 0 0 0 0 0 0
Chroma 1000 1000 1000 1000 1000 1000
Sharpness 0 0 0 0 0 0
BacklightControl LocalDimmingHigh
Color Temperature
Preset D65 D65 D65 D65 D65 DCI-P3
x 0.313 0.313 0.313 0.313 0.313 0.314
y 0.329 0.329 0.329 0.329 0.329 0.351
GainR/G/B 1023/1023/1023(When"D65Custom":1000/1023/1023)
BiasR/G/B 0 0 0 0 0 0
ColorGamut SMPTE-C EBU ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3
Gamma/EOTF 2.2 2.35 2.2 2.2 2.2 2.6
ColorRange Automatic Automatic Automatic Automatic Automatic Automatic
InputTransform
OutputTransform
OutputTransformSurround
CDL/UserLUT Off Off Off Off Off Off
BoostContrast Off Off Off Off Off Off
YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic Automatic
2020ConstantLuminance Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
2020GamutMapping Clipping Clipping Clipping Clipping Clipping Clipping
HybridLog-GammaSystem Manual(when"HybridLog- Gamma":1.200;
when"HybridLog-Gamma RGB":1.2-1000cd/m2)
HDR/SDRView Off Off Off Off Off Off
HDMILink Off Off Off Off Off Off
PictureModeName
58 OSD Menu
Item User 1 User 2 User 3 User 4 User 5-7
Contrast 4000 4000 4000 4000 1000
Brightness 0 0 0 0 0
Chroma 1000 1000 1000 1000 1000
Sharpness 0 0 0 0 0
BacklightControl LocalDimmingHigh
Color Temperature
Preset D65 D65 DCI-P3 D65 D65
x 0.313 0.313 0.314 0.313 0.313
y 0.329 0.329 0.351 0.329 0.329
GainR/G/B 1023/1023/1023(When"D65Custom":1000/1023/1023)
BiasR/G/B 0 0 0 0 0
ColorGamut ITU-RBT.2020 ITU-RBT.2020 DCI-P3 DCI-P3 ITU-RBT.709
Gamma/EOTF SMPTEST 2084(PQ)
HybridLog- Gamma
SMPTEST 2084(PQ)
SMPTEST 2084(PQ)
2.2
ColorRange Automatic Automatic Automatic Automatic Automatic
InputTransform
OutputTransform
OutputTransformSurround
CDL/UserLUT Off Off Off Off Off
BoostContrast On On On On Off
YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic
2020ConstantLuminance Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
Non-constant Luminance
2020GamutMapping Clipping Clipping Clipping Clipping Clipping
HybridLog-GammaSystem Manual(when"HybridLog-Gamma":1.200; when"HybridLog-GammaRGB":1.2-1000cd/m2)
HDR/SDRView On On On Off Off
HDMILink Off Off Off Off Off
PictureModeName User1 (2020PQ)
User2 (2020HLG)
User3 (DCIPQ)
User4 (DCIPQD65)
User5to User7
59OSD Menu
Item CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)
Contrast 4000 480
Brightness 0 0
Chroma 1000 1000
Sharpness 0 0
BacklightControl LocalDimmingHigh
Color Temperature
Preset D65 D60
x 0.313 0.322
y 0.329 0.338
GainR/G/B 1023/1023/1023(When"D65Custom":1000/1023/1023)
BiasR/G/B 0 0
ColorGamut ITU-RBT.2020
Gamma/EOTF CanonLog2(HDR)
ColorRange Automatic
InputTransform Automatic
OutputTransform DCI-P3
OutputTransformSurround DarkSurround
CDL/UserLUT Off Off
BoostContrast On Off
YCbCrColorMatrix Automatic Automatic
2020ConstantLuminance Non-constantLuminance Non-constantLuminance
2020GamutMapping Clipping Clipping
HybridLog-GammaSystem Manual(when"HybridLog- Gamma":1.200;
when"HybridLog-GammaRGB": 1.2-1000cd/m2)
HDR/SDRView Off Off
HDMILink Off Off
PictureModeName
60 OSD Menu
Channel Settings
Thismenuisusedforinputrelatedsettings.Selectthe"SelectChannel"andchooseachannelnumberfromCH1to CH30.Finallydefinetheparameterofeachofthe"ChannelSettings". SupportedSignalFormat( 105)
Item Setting Options
SelectChannel Displaythechannelnumber.Inaddition,youcanassigneachcontentof"ChannelSettings"toeach channel( 30). CH1toCH30
Note
Itmaytake5secondswhenswitchingchannels.
InputConfiguration Selecttheinput.Factorydefaultdependonthechannel( 64). 3G/HD-SDI, 3G-SDI RAW, SD-SDI, HDMI, (Not set)
SelectInputSignal Setsthesignaldisplaymethod( 15). Automatic:Thedisplaymethodisautomaticallydeterminedtomatchtheinputsignal. Quad Input:Fourinputsignals(InputAtoInputD)aredisplayed. Dual Input A,B:Twoinputsignals(InputAterminalandInputBterminal)aredisplayed. Dual Input C,D:Twoinputsignals(InputCterminalandInputDterminal)aredisplayed. Single Input A, Single Input B, Single Input C, Single Input D:Oneinputsignal(anyofInputA
toInputD)isdisplayed.
Note
Settingsthatcanbesetdifferaccordingtotheinputsignal.
- SD-SDI:Only"SingleInputA"to"SingleInputD"canbeselected. - HDMI:Thisisfixedto"Automatic".
ImageDivision Setsthedisplaymethodwhentheinputsignalis"3G/HD-SDI"and"SelectInputSignal"is"Quad Input"or"DualInput."Twodivisionmethods"SquareDivision"and"2SampleInterleave"are supportedfor4Kvideosignals.
"Quad Input"
Automatic:Automaticallydeterminedbasedonpayloadanddisplayed. Square Division:Displaysasignaltransmittedoverfourinputsasasingleimage. 2 Sample Interleave:Displaysasignaltransmitteddividedintoa2K/HDsignalasasingleimage. Multi View (Quad):Displaysthevideoofeachofthefourinputsinfourscreens.
"Dual Input A,B" or "Dual Input C,D"
Automatic:Automaticallydeterminedbasedonpayloadanddisplayed. Square Division:Displaysasignaltransmittedoverfourinputsasasingleimage. 2 Sample Interleave:Displaysasignaltransmitteddividedintoa2K/HDsignalasasingleimage. Dual Link 3G-SDI:DisplaysaDualLink3G-SDIsignalasasingleimage. Multi View (Dual):Displaysthevideoofeachofthetwoinputs(InputA,BorInputC,D)intwo
screens.
SelectInputSignal:QuadInput,ImageDivision:SquareDivision
LinkOrder Automaticallydetectsanddisplayscorrectterminalorderbasedonpayloadwhenusing"2Sample Interleave"or"DualLink3G-SDI". Automatic, Off
61OSD Menu
Item Setting Options
Format Setsthecolorformatandgradation.
SDI Signal
Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit, 4:4:4 YCbCr 12-bit, 4:2:2 ICtCp 10-bit, 4:2:2 ICtCp 12-bit, 4:4:4 ICtCp 10-bit, 4:4:4 ICtCp 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 10-bit, 4:4:4 XYZ 12-bit
HDMI Signal
Automatic, 4:4:4 XYZ 12/10-bit
Note
TheHD-SDIsignaliseither"4:2:2YCbCr10-bit"or"4:2:2ICtCp10-bit".
"SD-SDI"isfixedto"4:2:2YCbCr10-bit".
For"3G-SDIRAW",thesettingisfixedto"Automatic".
ThesettingsforcorrectlydisplayingICtCpformatsignalsareasfollows.
- "PictureMode":"ITU-RBT.709"or"ITU-RBT.2020" - "ColorGamut":"ITU-RBT.709"or"ITU-RBT.2020" - "Gamma/EOTF":"SMPTEST2084(PQ)","HybridLog-Gamma"or"HybridLog-Gamma RGB"
IfyouneedtousetheICtCpformatforSDIsignals,selectanyofthefollowingtomatchthe signal:"4:2:2ICtCp10-bit","4:2:2ICtCp12-bit","4:4:4ICtCp10-bit","4:4:4ICtCp12-bit"
If"Automatic"isselected,theyarerenderedinaPayloadthatisselectedintheorderAB CD.
Touse4:4:4XYZ10-bitforSDIsignals,select"4:4:4XYZ10-bit".Then,signalswillbe processedassignalswhereXYZdataisincludedinRGBdataoutputin4:4:4RGB10-bit format.
AudioInput Setstheaudioterminal.Terminalsthatcanbeselecteddifferaccordingtothesettingof"SelectInput Signal." When"QuadInput":Automatic, Input A, Input B, Input C, Input D When"DualInputA,B":Automatic, Input A, Input B When"DualInputC,D":Automatic, Input C, Input D Automatic:Setsautomaticallytomatchtheinputsignal.
Note
Thissettingisfixedat"Automatic"when"SelectInputSignal"is"Automatic"or"SingleInput".
Marker/TC/CameraInfo Input
Setthetargetterminalsothatvariousmarkers(exceptGridMarker),TimeCode,andCamera Informationaredisplayed.(CameraInformationisavailableinthe"MultiView(Quad)"displayonly) When"Automatic"or"QuadInput":Input A, Input B, Input C, Input D When"DualInputA,B":Input A, Input B When"DualInputC,D":Input C, Input D
Note
Thissettingbecomesinvalidexceptforthe"MultiView(Quad)"or"MultiView(Dual)"display.
InternalSync Setswhethertosynchronizefourinputswhen"SquareDivision"isselected. On:Forcesynchronization. Off:Donotforcesynchronization.
ChannelName Setsthenameoftheselectedchannel.Youcaninputupto16alphanumericcharacters.
62 OSD Menu
Item Setting Options
PictureMode Set"PictureMode"byindividualchannel.
Type Normal:Setone"PictureMode". Picture Mode
L/R:Sets"PictureMode"byindividualleftandrightscreen.Displaysas"SingleInputDualView" whenusingresolutionsof2Korlower.
Picture Mode L, Picture Mode R 4K/2K:Sets"PictureMode"byindividual4Kor2Ksignalscreen.
Resolution 4K, Resolution 2K Automatic:"PictureMode"issetaccordingtotheSDIsignal.Theset"PictureMode"ischangedto
intheordercamerametadataPayloadresolution(4K/2K). Resolution 4K, Resolution 2K, Payload UHD/PQ, Payload UHD/HLG, Payload UHD, Payload 709/PQ, Payload 709/HLG, Payload 709, Payload VANC, Payload Unknown, Camera CINEMA EOS SYSTEM, Camera ARRI, Camera VARICAM
Note
Settingsthatcanbesetdifferaccordingtotheinputsignal.
- "SD-SDI":"Type"isfixedto"Normal"."Automatic"cannotbeset. - "3G-SDIRAW"and"HDMI":"Automatic"and"4K/2K"cannotbesetin"Type".
When"Type"is"L/R"
- Settingthesame"PictureMode"forbothleftandrightscreenswillcause"PictureMode" inthenon-selectedscreentochangetoadifferentmode(forexample,the"PictureMode" settingsoftheleftandrightscreensareswitched).
- Whenusingasignal2Korunder,itisfixedat"SingleInputDualView".(Forexample,the "PictureMode"settingsoftheleftandrightscreensareswitched.)
PictureMode Setthe"PictureMode"foreachscreen.
SMPTE-C, EBU, ITU-R BT.709, ITU-R BT.2020, Adobe RGB, DCI-P3, User 1 (2020 PQ), User 2 (2020 HLG), User 3 (DCI PQ), User 4 (DCI PQ D65), User 5 ~ User 7, CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1):Canbesetwhen"Type"is"Normal". (Not set):Cannotautomaticallychangeimagequalitytosuitinputsignal.Canbesetwhenother than"Resolution4K"and"Resolution2K"areselectedin"Type""Automatic".
ColorimetryBit/TransferCharacteristicsoftheSDIPayloadIDsupportsthesignalinconformity withthefollowingstandard.
SMPTEST425-1:2017(3G-SDISingleLink/SquareDivision) SMPTEST425-3:2019(3G-SDIDualLink(2SI)) SMPTEST425-5:2019(3G-SDIQuadLink(2SI)) SMPTEST292-1:2018(HD-SDI)
PictureModeL
PictureModeR
Resolution4K
Resolution2K
PayloadUHD/PQ
PayloadUHD/HLG
PayloadUHD
Payload709/PQ
Payload709/HLG
Payload709
PayloadVANC
PayloadUnknown
CameraCINEMAEOS SYSTEM
CameraARRI
CameraVARICAM
63OSD Menu
Item Setting Options
SingleInputDualView Whenotherthan"ImageDivision""MultiView(Quad)"or"MultiView(Dual)",theimagefromthe inputsignalcanbereducedandshownindual-screen. Automatic:When"PictureMode""Type"is"L/R",orwhenthe"PictureFunctionSettings"Sub Menuitemsaresetto"On",identicalimagesareautomaticallyshownanddual-screencomparison canbemade.4Kimagesareshowninreducedsize. Relevant"PictureFunctionSettings"SubMenuitems: "Peaking","FalseColor","OverRange","2020OutsideofGamutView","Monochrome","BlueOnly", "RedOff","GreenOff","BlueOff",and"CompareView" Off
Note
Cannotbeusedwhenunsupportedvideosignalisinput.
Separator Inthefollowingcases,screenborderswillbedisplayed. - When"PictureMode""Type"is"L/R" - When"MultiView(Quad)"or"MultiView(Dual)"isselected - When"SingleInputDualView"issetto"Automatic"andtheimagesareshownnexttoeachother forimagecomparison - When"PictureFunctionSettings""CompareView""Enable"is"On"
White, Half, Black, Off
64 OSD Menu
Thefactorydefaultsettingsforeachchannelisshowninthefollowingtable.
CH CH1 CH2 CH3 CH4 CH5
InputConfiguration 3G/HD-SDI HDMI 3G-SDIRAW 3G/HD-SDI 3G/HD-SDI
SelectInputSignal Automatic Automatic Automatic Automatic Automatic
ImageDivision Automatic Automatic Automatic Automatic Automatic
LinkOrder Automatic Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic Automatic
AudioInput Automatic Automatic Automatic Automatic Automatic
Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA
InternalSync Off Off Off Off Off
ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)
PictureModeType Normal Normal Normal 4K/2K L/R
PictureMode PictureModeL Resolution4K
ITU-RBT.709 ITU-RBT.709 CINEMAEOS SYSTEM
User1 (2020PQ)
User1 (2020PQ)
PictureModeR Resolution2K
ITU-RBT.709
Payload UHD/PQ User1(2020PQ)
UHD/HLG User2(2020HLG)
UHD ITU-RBT.2020
709/PQ
709/HLG
709 ITU-RBT.709
VANC
Unknown
Camera CINEMA EOS SYSTEM
CINEMAEOSSYSTEM
ARRI User6
VARICAM User7
SingleInputDualView Off Off Off Automatic Off
Separator Off Off Off Off White
65OSD Menu
CH CH6 CH7 CH8 CH9 CH10 to CH30
InputConfiguration 3G/HD-SDI 3G/HD-SDI 3G/HD-SDI 3G/HD-SDI (Notset)
SelectInputSignal Automatic Automatic Automatic Automatic Automatic
ImageDivision Automatic Automatic Automatic Automatic Automatic
LinkOrder Automatic Automatic Automatic Automatic Automatic
Format Automatic Automatic Automatic Automatic Automatic
AudioInput Automatic Automatic Automatic Automatic Automatic
Marker/TC/CameraInfoInput InputA InputA InputA InputA InputA
InternalSync Off Off Off Off Off
ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)
PictureModeType L/R 4K/2K L/R L/R Normal
PictureMode PictureModeL Resolution4K
User1 (2020PQ)
User2 (2020HLG)
User2 (2020HLG)
User2 (2020HLG)
ITU-RBT.709
PictureModeR Resolution2K
ITU-RBT.709
Payload UHD/PQ User1(2020PQ)
UHD/HLG User2(2020HLG)
UHD ITU-RBT.2020
709/PQ
709/HLG
709 ITU-RBT.709
VANC
Unknown
Camera CINEMA EOS SYSTEM
CINEMAEOSSYSTEM
ARRI User6
VARICAM User7
SingleInputDualView Automatic Automatic Off Automatic Off
Separator Off Off White Off Off
66 OSD Menu
Display Settings
Thismenuisusedtoconfigurethedisplaymethod.
Item Setting Options (underline indicates factory default)
ScreenScaling Defineshowthevideoisscaledanddisplayedonthescreen. Native Input Resolution:Displaystheinputsignalwithoutscaling.
1920x1080(original)
200%:Doublestheverticalandhorizontaldimensions.
1920x10803840x2160
Automatic:Enlargestofullscreen.
1920x10803840x2160
Note
Inthefollowingcases,themaximummagnificationis200%evenif"Automatic"isselected.
- When"Peaking","FalseColor"or"OverRange"is"On"
Anamorphic Setwhencheckingimagesphotographedusingananamorphiclens.Displayedinaccordancewith thesetmagnification. x2.0, x1.8, x1.5, x1.33, Off
Note
Settingsareinvalidinthefollowingcases:
- When"Peaking","FalseColor"or"OverRange"issetto"On"
67OSD Menu
Item Setting Options (underline indicates factory default)
ScalingMethod Setstheinterpolationmethodwhen"ScreenScaling"issetto"200%"or"Automatic". Shape Trace:Canonoriginalprocessingthatproducessmoothslopeswithreducedjaggedlines.
Bicubic:Generalinterpolationprocessthatusesneighboringpixelinformationtocreateinterpolatedpixels.
Nearest Neighbor:Processthatusesnearestneighborpixelinformationtocreate(copy)new pixels.Thisisusefulasitenlargestheoriginalpixels,thusmakinganyjaggedlinesvisible.
VideoPosition (MultiView)
Whendisplayingontwoorfourscreens("MultiView(Quad)"or"MultiView(Dual)"or"SingleInput DualView"display),settheverticaldisplaypositionfortheimage. "Top":Displaysatthetopofthescreen. "Middle":Displaysatthetopmiddleofthescreen. "Center":Displaysatthemiddleofthescreen. Top, Middle, Center
68 OSD Menu
Item Setting Options (underline indicates factory default)
Zoom Enlargespartofthevideoimage.Thezoomfunctioncanbeusedwhentheresolutionis "4096x2160","3840x2160","2048x1080"or"1920x1080".
Note
Thezoomfunctioncannotbeusedinthefollowingcases:
- Duringexecutionof"PlaybackFile"under"ScreenCapture" - Duringdisplayofthetestpattern - Whencalibrationhasbeenstarted. - When"MultiView(Quad)"or"MultiView(Dual)"isselected - When"ChannelSettings""PictureMode""Type"issetto"L/R" - When"PictureFunctionSettings""CompareView""Enable"issetto"On"
Whilethezoomfunctionisinuse,thefollowingarenotdisplayed: BackgroundColor,variousmarkers
Whenzoomsettingsarechanged,"FrameHold"turns"Off".
When"Type""Normal"isselected:Whentheresolutionis"2048x1080"or"1920x1080", thedisplaypositioncannotbechangedevenif"Magnification"issetto"x2".
ZoomPreset Setsthezoomdisplaymethod.Therearethreepresets. Zoom 1, Zoom 2, Zoom 3, Off
Magnification Setsthedisplayscaleofzoom. x2, x4, x8
Position Thezoomadjustmentscreenisdisplayed.Usethejogdialtoadjustthedisplayposition.
Type Setstheenlargedimagedisplaymethod. Normal:Onlydisplaystheenlargedimage. Single Input Dual View:Displaystheoverallimageontheleftandtheenlargedimageontheright.
Note
When"Type""SingleInputDualView"isselected:For4Kvideo(3840x2160or4096x2160), thequalityoftheenlargedimagewillbedegradedcomparedto"Normal".
69OSD Menu
Item Setting Options (underline indicates factory default)
FrameHold Pausesthevideo. On, Off
Note
Settingisdisabledwhen"Peaking"issetto"On".
Iftheimagequalitysettingischangedwhilethevideoispaused,thesettingmaynotchange correctly.
BackgroundColor Setsthecoloroftheblackbandtochecktheboundaryoftheblackbandandvideoimage. White, Gray, Off
Note
Settingisdisabledwhen"MultiView(Quad)"or"MultiView(Dual)"isselected.
I/PsF DefineshowtheinterlacesignalorPsFsignalisdisplayed. Automatic:Automaticallydeterminedbasedonpayloadanddisplayed.Ifthereisnopayload,the
signalisdisplayedasaninterlacesignal. Interlace:Displayedasaninterlacesignal. PsF:DisplayedasaPsFsignal.
PsF DefineshowthePsFsignalisdisplayed. Progressive:Interpolatesgivingpreferencetoimagequalitybydetectingpairedfields. Interlace:Interpolatesusingtwoadjacentfieldsgivingprioritytospeed.
I/PConversion SetstheinterlacedsignalI/Pconversionmethod. Image Priority:Thismodegivesprioritytoimagequality.Processingtimewillbelongerthan"Speed
Priority". Speed Priority:Thismodegivesprioritytospeed.
FilmCadence Setsthefilmcadencemode. 2-2:Displaysprogressiveimageafterconversionfor2-2pulldownprocessedinterlacedsignalinput. 2-3:Displaysprogressiveimageafterconversionfor2-3pulldownprocessedinterlacedsignalinput. 2-3-3-2:Displaysprogressiveimageafterconversionfor2-3-3-2pulldownprocessedinterlaced
signalinput. Off:Doesnotperformfilmcadencemodeprogressiveconversion.
Note
Thiscanbesetonlywhen"I/PConversion"issetto"ImagePriority".
Cannotbesetinthe"MultiView(Quad)"or"MultiView(Dual)"display.Thesettingisfixedto "Off".
70 OSD Menu
Audio Settings
Thismenuisusedtosetaudiooutputfromtheheadphoneterminal.
Item Setting Options (underline indicates factory default)
SDIGroup SwitchestheaudiogrouptobeinputduringSDIaudioinput. CH1-CH8, CH9-CH16
CHL/R(SDI) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphonerespectively.Theoptionsdiffer accordingtothe"SDIGroup"setting. When"CH1-CH8"isselectedfor"SDIGroup":CH1-CH8 When"CH9-CH16"isselectedfor"SDIGroup":CH9-CH16
CHL/R(HDMI) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphonerespectively. CH1-CH8
Volume Setsthevolume. 0 to 100 (30)
AudioSwitch Setsthestereooutput. L R, L, R, MIX (L+R)
71OSD Menu
Marker Settings
Thismenuisusedtoconfigurevariousmarkers.
Item Setting Options (underline indicates factory default)
MarkerPreset Customizesmarkerswhichareassignedtomarkers1to5. Marker 1to5, Off
AspectMarker "AspectMarker"displaysarangeinaccordancewiththespecifiedaspectratio.
Note
"AspectMarker"isnotdisplayedinthefollowingcases:
Whenthereisnosignal,unsupportedsignal,orachannelwith"InputConfiguration"notsetis selected
Whenanenlargedimageisdisplayed
Duringtheexecutionof"PlaybackFile"under"ScreenCapture"
Whena"TestPattern"isdisplayed
Enable SwitchestheaspectmarkerOn,Off. On,Off
Mask Switchesthemaskcolor.Maskistheblankingareaoutsidetherangeofthemarker. Black:
Half (50% gray):
Off:Turnsmaskoff.
AspectRatio Setstheaspectratiooftheaspectmarker. 16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable Theaspectratiocanbeenteredasanumericvaluewhenyouselect"Variable"(0.01:1increments).The grayedoutsliderbecomesactiveandcanbeusedtosettheaspectratio. 1.00:1to3.00:1(1.78:1)
Line Activewhen"Black"or"Half"isselectedfor"Mask".SwitcheslinesonmaskOn,Off. On, Off
LineWidth Setsthethicknessoftheaspectmarkerline. Thick, Normal, Thin
72 OSD Menu
Item Setting Options (underline indicates factory default)
LineColor Setsthecoloroftheaspectmarkerline. White, Red, Green, Blue, Yellow, Cyan, Magenta, Gray
Line Brightness
Setsthebrightnessoftheaspectmarkerline. High, Low, Half
HPosition Changeshorizontalpositionwithoutchangingtheaspect. -65to65 (0)
VPosition Changesverticalpositionwithoutchangingtheaspect. -35to35 (0)
SafetyZoneMarker1,2 Therearetwotypesof"SafetyZoneMarker":1and2,whichsharethesamesettings.Asafetyzone markerisusedtosetthesafezoneoftheimage(actualdisplayedarea)tochecktheimage.
Note
"SafetyZoneMarker"isnotdisplayedinthefollowingcases:
Whenthereisnosignal,unsupportedsignal,orachannelwith"InputConfiguration"notsetis selected
Whenanenlargedimageisdisplayed
Duringtheexecutionof"PlaybackFile"under"ScreenCapture"
Whena"TestPattern"isdisplayed
Enable SwitchesthesafetyzonemarkerOn,Off. On,Off
AspectRatio Setstheaspectratioofthesafetyzonemarker. 16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable Theaspectratiocanbeenteredasanumericvaluewhenyouselect"Variable"(0.01:1increments).The grayedoutsliderbecomesactiveandcanbeusedtosettheaspectratio. 1.00:1to3.00:1(1.78:1)
Note
When"AreaSize"issetto"Variable(dot)",youcannotselect"AspectRatio".
AreaSize Setsthesafetyzonemarkerareasize. 80%, 88%, 90%, 93%, Variable (%), Variable (dot) When"Variable(%)"isselected,thegrayedout"Rate(%)"becomesactive.When"Variable(dot)"is selected,thegrayedout"Width(dot)"and"Height(dot)"becomeactive.Thiscanbesetbymovingthe slider.
Rate(%) Becomesactivewhenyouselect"Variable(%)"underthemenu"AreaSize".Movetheslidertosetthe displayedmarkerareasizewithoutchangingtheaspectratioin1%increments. 50to100 (80)
Width(dot) Becomesactivewhenyouselect"Variable(dot)"underthemenu"AreaSize".Movetheslidertosetthe areawidthin2dotincrement. 360to4096 (3276)
Height(dot) Becomesactivewhenyouselect"Variable(dot)"underthemenu"AreaSize".Movetheslidertosetthe areaheightin2dotincrement. 240to2160 (1728)
73OSD Menu
Item Setting Options (underline indicates factory default)
Shape Setstheareashapeofthesafetyzonemarker. Box:
Brackets:
Enclosure:
LineWidth Setsthewidthofthesafetyzonemarkerline. Thick, Normal, Thin
LineColor Setsthecolorofthesafetyzonemarkerline. White, Red, Green, Blue, Yellow, Cyan, Magenta, Gray
Line Brightness
Setsthebrightnessofthesafetyzonemarkerline. High, Low, Half
HPosition Adjuststhemarkerhorizontalpositionwiththesetaspectandsize. -65to65 (0)
VPosition Adjuststhemarkerverticalpositionwiththesetaspectandsize. -35to35 (0)
74 OSD Menu
Item Setting Options (underline indicates factory default)
AreaMarker "AreaMarker"isusedtocheckaspecificareausingarectangularbox.
Note
"AreaMarker"isnotdisplayedinthefollowingcases:
Whenthereisnosignal,unsupportedsignal,orachannelwith"InputConfiguration"notsetis selected
Whenanenlargedimageisdisplayed
Duringtheexecutionof"PlaybackFile"under"ScreenCapture"
Whena"TestPattern"isdisplayed
Enable SwitchestheareamarkerOn,Off. On, Off
HPosition Setsthestartposition(x-coordinate)todrawtherectangle(inincrementsof2). 0 to 4086 (240)
VPosition Setsthestartposition(y-coordinate)todrawtherectangle(inincrementsof2). 0 to 2150 (120)
Width(dot) Setsthewidthoftherectangle(inincrementsof2). 10 to 4096 (240)
Height(dot) Setstheheightoftherectangle(inincrementsof2). 10 to 2160 (120)
Mask Switchesthemaskcolor(inthemarker). Black,Half,Off
Line TurnsOn/Offtheoutlinesoftherectangularbox. On,Off
LineWidth Setsthewidthoftheareamarkerline. Thick, Normal, Thin
LineColor Setsthecoloroftheareamarkerline. White, Red, Green, Blue, Yellow, Cyan, Magenta, Gray
Line Brightness
Setsthebrightnessoftheareamarkerline. High, Low, Half
75OSD Menu
Item Setting Options (underline indicates factory default)
CenterMarker "CenterMarker"showsthecenteroftheimage.
Note
"CenterMarker"isnotdisplayedwhenanenlargedimageisdisplayed.
Enable SwitchesthecentermarkerOn,Off. On, Off
Size Setsthesizeofthecentermarker. Large, Middle, Small
LineWidth Setsthewidthofthecentermarkerline. Thick, Normal, Thin
LineColor Setsthecolorofthecentermarkerline. White, Red, Green, Blue, Yellow, Cyan, Magenta, Gray
Line Brightness
Setsthebrightnessofthecentermarkerline. High, Low, Half
GridMarker "GridMarker"ismarkerusedtocheckthehorizontalandverticalposition.
Note
"GridMarker"isnotdisplayedwhenanenlargedimageisdisplayed.
Enable SwitchesthegridmarkerOn,Off. On, Off
Distance Setsthehorizontalandverticallinedistance. 160 dots, 240 dots, 320 dots
LineWidth Setsthewidthofthegridmarkerline. Thick, Normal, Thin
LineColor Setsthecolorofthegridmarkerline. White, Red, Green, Blue, Yellow, Cyan, Magenta, Gray
Line Brightness
Setsthebrightnessofthegridmarkerline. High, Low, Half
76 OSD Menu
Function Settings
Thismenuisusedtosettheimagesignalinformationdisplayandthecinemacameralinkfunction.
Item Setting Options (underline indicates factory default)
TimeCode Displaythetimecodesuperimposedonthesignal.
VITC 01:23:45.05
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
When"MultiView(Dual)"isdisplayed,the"HOffset"settingisinvalid.
Enable SwitchesthetimecodedisplayOn,Off. On, Off
Type Selectsthetype. VITC, LTC
Note
ThissettingbecomesinvalidwhenHDMIsignalisinputandisfixedto"VITC".
Size Selectsthesize. Large, Small
Position Selectsthedisplayposition. Top Left, Top Right, Bottom Left, Bottom Right
Note
Thissettingbecomesinvalidinthe"MultiView(Dual)"display.
HOffset Adjuststhedisplaypositionofthetimecode. 0 to 1460 (0)
TypeStringDisplay SetsdisplayofVITC/LTCstrings. On, Off
Brightness SetstheBrightnessofthestrings. Normal, Half
77OSD Menu
Item Setting Options (underline indicates factory default)
AudioLevelMeter Configuresvarioussettingsfortheaudiolevelmeter.Displaystheaudioleveloftheselectedchannel number.
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
Enable SwitchestheaudiolevelmeterOn,Off. On,Off
ChannelNumber (SDI)
SetsthenumberofchannelsdisplayedwhenSDIsignalisinput.Optionschangeaccordingtothe settingfor"SDIGroup"under"AudioSettings". When"CH1-CH8"isselectedfor"SDIGroup":2CH(CH1-CH2), 4CH(CH1-CH4),
6CH(CH1-CH6), 8CH(CH1-CH8), 8CH (1-4, 5-8)(CH1-CH8)
When"CH9-CH16"isselectedfor"SDIGroup":2CH(CH9-CH10), 4CH(CH9-CH12), 6CH(CH9-CH14), 8CH(CH9-CH16), 8CH (1-4, 5-8)(CH9-CH16)
Note
When"ChannelNumber(SDI)"issetto"8CH(1-4,5-8)",if"Size"issetto"Large",the resultingdisplaywillbethesameasfor"8CH".
ChannelNumber (HDMI)
SetsthenumberofchannelsdisplayedwhenHDMIsignalisinput. 2CH (CH1-CH2), 4CH (CH1-CH4), 6CH (CH1-CH6), 8CH (CH1-CH8)
Size Setsthesizeofthedisplay. Large, Middle, Small
PeakHold Whensetto"On",onesecondofaudiosignalatthepeakiskept. On, Off
ReferenceLevel Setsthereferencelevel. -40 to 0 (-20)
Brightness Setsbrightnessfortheaudiolevelmeter. Normal, Low, Half
WaveFormMonitor Configuresvarioussettingsforthewaveformmonitor.Onthewaveformmonitor,thehorizontalaxis showsthehorizontalresolutionofthevideoandtheverticallineshowsthesignallevel.Totherightof thewaveformmonitor,"ColorRange"and"HDRRange"information(verticalline)isdisplayed.
1023
-4% 0%
50 %
100 %
0
Signallevel
IRE
Horizontalresolutionofvideo
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
Enable SwitchesthewaveformmonitorOn,Off. On, Off
78 OSD Menu
Item Setting Options (underline indicates factory default)
SelectSignal Setsthewaveformtobedisplayed. Y, Cb, Cr, R, G, B
DisplayType Setsthedisplaytype.When"Line"isselected,dataforonelineisdisplayed. All, Line Selectsthelinetobedisplayedwhen"Line"isselected. Select Line: 1 to 2160
Scale Setsthescaleofthewaveformmonitor. Automatic:Setsinaccordancewiththe"Gamma/EOTF"and"ColorRange"settings. IRE, ST 2084 (PQ) Full, ST 2084 (PQ) Limited, Hybrid Log-Gamma, Canon Log, Canon Log 2, Canon Log 3, S-Log2, S-Log3, ARRI (Rec2100-PQ-1K-100), ARRI (Rec2100-HLG-1K-200):Selectthescale.
ReferenceLine Aguideisdisplayedatthespecifiedposition."ReferenceLine"isnotdisplayedwhen"1023"is selected. 4 to 1023
ReferenceLevel Setstherangeofthereferencelevel.Tintstheoutsideoftherangeofthereferencelevel. Inthecaseof"Gamma/EOTF"correspondingtotheHDRrange,partsthatexceedtheHDRrange aretinted.
When"ColorRange""Limited",outsidethelimitedrangeistinted.
Automatic:Setsinaccordancewiththe"Gamma/EOTF"and"ColorRange"settings. Manual:Whenyouselect"Manual",setsthereferencelevel. Reference Level High:Setsthereferencedisplaylevel(high)."ReferenceLevelHigh"isnot
displayedwhen"1023"isselected. 468 to 1023
Reference Level Low:Setsthereferencedisplaylevel(low)."ReferenceLevelLow"isnot displayedwhen"0"isselected. 0 to 468
Color Setsthesignalstobedisplayedandthecolorofsignalsexceedingthereferencelevel. Y, Cb, Cr, R, G, B:Selectsthesignal. Selectsthecoloroftheselectedsignal. White, Red, Green, Blue, Yellow, Cyan, Magenta Defaultvalueofeachsignalisshownbelow. Y(White),Cb(White),Cr(White),R(Red),G(Green),B(Blue) Reference Level High, Reference Level Low:Selectsthereferencelevel. White, Red, Green, Blue, Yellow, Cyan, Magenta Defaultvalueofeachreferencelevelisshownbelow. ReferenceLevelHigh(Magenta),ReferenceLevelLow(Cyan)
Position Selectsthedisplayposition. Bottom Left, Bottom Right
Note
Thissettingbecomesinvalidinthe"MultiView(Dual)"display.
Size Setsthesizeofthedisplay. Large, Middle, Small
79OSD Menu
Item Setting Options (underline indicates factory default)
VectorScope Configuresvarioussettingsforthevectorscope.Vectorscopedisplaystheintensityofcolorsignalsand huewiththehorizontalaxisshowingthecolordifferencesignalCbandtheverticallineshowingCr.
Red
Green
Yellow Blue
Cyan
Magenta
(Cb,Cr)=(255,255)
(Cb,Cr)=(0,0)
Cr
Cb
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
Enable SwitchesthevectorscopeOn,Off. On, Off
Target Setsthetarget. 75%, 100%, 75%+100%
Position Selectsthedisplayposition. Bottom Left, Bottom Right
Note
Thissettingbecomesinvalidinthe"MultiView(Dual)"display.
Size Setsthesizeofthedisplay. Large,Middle, Small
Histogram Displaystheluminancedistributionofthevideo.
Averageluminance
Peakluminance
BeyondHDRrange
LuminanceDistribution HDRRatio SDRRatio
Enable Switchesbetweendisplayingorhiding"Histogram". On, Off
80 OSD Menu
Item Setting Options (underline indicates factory default)
Color Automatic:Unless"PictureFunctionSettings""FalseColor""Enable"issetto"Off",itwill automaticallyadjustthedisplaytomatchthe"FalseColor"settings.
Normal:Displaysinmonochrome. False Color:When"Gamma/EOTF"issetto"SMPTEST2084(PQ)"or"HybridLog-Gamma",
thenitwilladjustthedisplaytomatchthe"FalseColor"settings. When"FalseColor""Enable"is"FalseColor1"or"Off":Matchthe"FalseColor1"settings. When"FalseColor""Enable"is"FalseColor2":Matchthe"FalseColor2"settings.
Gain Increasesthedisplayedgraphsize. x1, x2, x3
HDRRange On:AreasthatexceedtheHDRrangewillbetinted. On (Clip):AreasthatexceedtheHDRrangeandareasthatexceedtheHDRrangeandareclipped
willbetinted. Off:AreasthatexceedtheHDRrangewillnotbetinted.
HDR/SDRRatio Switchesbetweendisplayingornotdisplayingthe"HDR/SDRRatio"when"Gamma/EOTF"issetto "SMPTEST2084(PQ)"or"HybridLog-Gamma".TheratiocalculationforHDR/SDRusesthe"False Color""HDR/SDRBorder"settings. On, Off
Peak/Ave. Luminance
Switchesbetweendisplayingornotdisplayingthe"Peak/Ave.Luminance"when"Gamma/EOTF"is setto"SMPTEST2084(PQ)"or"HybridLog-Gamma". On, Off
Size Setsthesizeofthedisplay. Large, Small
Note
Fixedto"Small"during"SingleInputDualView".
81OSD Menu
Item Setting Options (underline indicates factory default)
FrameLuminanceMonitor When"Gamma/EOTF"issetto"SMPTEST2084(PQ)"or"HybridLog-Gamma","Max./Ave. Luminance"fortheentirescreen(frame)isdisplayed.Forotherconditions,"Max./Ave.Gradation Values"isdisplayed.Theframeluminancemonitorcanbeusedwhentheresolutionis"4096x2160", "3840x2160","2048x1080"or"1920x1080".
Currentvalueforpeakluminance (cumulativemaximumvalue)
Currentvalueforaverageluminance (cumulativemaximumvalue)
Peakluminance
Averageluminance
Luminancegraph
Currentvalueforpeakluminance (cumulativemaximumvalue)
Currentvalueforaverageluminance (cumulativemaximumvalue)
Peakluminance
Luminance distributiongraph
Averageluminance
Ratiograph
HDRRatio SDRRatio
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
Theupdatetimefor"FrameLuminanceMonitor"maytakealongduration,orgraphindication of"FrameLuminanceMonitor"mayberesetwhendisplayingthe"FrameLuminanceMonitor" andoperatingtheOSDmenu.
Enable Sets"FrameLuminanceMonitor"onoroff.Obtainstheluminancevaluewhenvalid. On, Off
Display Setswhethereachgraphisdisplayed. All:Displays"LuminanceGraph(Includingluminancevalue)"and"HDR/SDRRatioGraph". Luminance Graph:Displays"LuminanceGraph(Includingluminancevalue)". HDR/SDR Ratio Graph:Displays"HDR/SDRRatioGraph". Luminance Value:Displaysthepeakandaverageluminancevalues. Off:Doesnotdisplayanygraphs.
82 OSD Menu
Item Setting Options (underline indicates factory default)
LuminanceGraph Settings
Sets"LuminanceGraph"displaymethod.
Luminance Distribution:Switchesbetweendisplayingandnotdisplayingtheluminancedistribution graph. On, Off
Color Automatic:Unless"PictureFunctionSettings""FalseColor""Enable"issetto"Off",itwill
automaticallyadjustthedisplaytomatchthe"FalseColor"settings. Normal:Displaysinmonochrome. False Color:When"Gamma/EOTF"issetto"SMPTEST2084(PQ)"or"HybridLog-Gamma",
thenitwilladjustthedisplaytomatchthe"FalseColor"settings. When"FalseColor""Enable"is"FalseColor1"or"Off":Matchthe"FalseColor1" settings. When"FalseColor""Enable"is"FalseColor2":Matchthe"FalseColor2"settings.
Reference Luminance Level - Peak Automatic:Worksinconjunctionwiththe"HDRRange"settingstoautomaticallytinttheareasthat
exceedthepeakluminance. Manual:Setstheupperlimitforpeakluminance.Areasthatexceedthesetvaluewillbetinted.
(400to4000:incrementsof100,4000to10000:incrementsof1000) 400to10000(1000)
Reference Luminance Level - Ave.:Areasthatexceedthesetvaluewillbetinted. (Incrementsof100) 100to1000(400)
Reference Lum. Rise Level - Peak:Setsthepeakluminancerisereferencevalue.(Incrementsof 10cd/m2) 0to1000(400)
Reference Lum. Rise Level - Ave.: Setstheaverageluminancerisereferencevalue.(Increments of10cd/m2) 0to1000(200)
HDR/SDRRatio GraphSettings
Sets"HDR/SDRRatioGraph"displaymethod.TheratiosforHDRandSDRusethe"FalseColor" "HDR/SDRBorder"settingsaswellasthesettingsforeachrange. Type HDR/SDR:DisplaystheratiobetweentheHDRandSDRareas. HDR:DisplaystheratioofluminanceintheHDRarea. Scale:When"Type"issetto"HDR",setsthescaleoftheluminancevalue. Automatic, 100%, 75%, 50%, 25%
Size Setsthesizeofthedisplay. Large, Small
Note
Fixedto"Small"during"SingleInputDualView".
Reset Resetsthedisplayedcontent.
Export Theluminanceinformationobtainedwhen"FrameLuminanceMonitor"isvalid,isexportedtothe USBmemory.
83OSD Menu
Item Setting Options (underline indicates factory default)
PixelValueCheck When"Gamma/EOTF"issetto"SMPTEST2084(PQ)"or"HybridLog-Gamma",theluminanceand RGBvalueofthespecifiedpixel(cursor)positionaremeasuredanddisplayed.Thepixelvaluecheck canbeusedwhentheresolutionis"4096x2160","3840x2160","2048x1080"or"1920x1080".
Note
Settingsofthevideodisplaythatcannotbedisplayed,orinputsignalstatus( 88)
Theupdatetimefor"PixelValueCheck"maytakealongdurationwhendisplayingthe"Pixel ValueCheck"andoperatingtheOSDmenu.
Enable Switchesthe"PixelValueCheck"On,Off. On, Off
HPosition Setsthepixelposition(horizontal). 1 to 4096 (960)
VPosition Setsthepixelposition(vertical). 1 to 2160 (540)
ResetPosition SetsoperationwhentheRESETbuttonispressed. Normal:Resetsthevaluetothedefaultvalue. Around Peak Luminance:Movesclosertotheareaofpeakluminanceinsidethedisplayimage.
TestPattern Setsthetestpatternbuiltintothemainunit. White (1023), White (940), Gray, Black (64), Black (0), Ramp, Color Bars, Color Bars (PQ Full), Color Bars (PQ Limited), Color Bars (HLG), PLUGE, PLUGE (PQ/HLG), Off
Note
Ifthepoweristurnedoffonceandthenbackon,thetestpatternwillnotbedisplayed.
Thetestpatternwillbeerasedinthefollowingcases:
- Whencalibrationhasbeenstarted - WhenachannelischangedusingtheCHbutton,FbuttonassignedforChannelUP/ ChannelDOWN,or"SelectChannel"under"ChannelSettings"
- Whenchanging"InputConfiguration"or"SelectInputSignal"under"ChannelSettings" - When"ResetAllSettings"isexecuted
84 OSD Menu
Item Setting Options (underline indicates factory default)
SignalMonitoring Monitorstheinputsignalstatus.
Note
"SignalMonitoring"cannotbeusedinthefollowingcases:
- When"SingleInputDualView"isdisplayed - Whenanenlargedimageisdisplayed - Duringdisplayofthetestpattern - Duringexecutionof"PlaybackFile"under"ScreenCapture"
Whenanerrorisdisplayed,"InMonitorDisplay"willnotbeshown.
Thepositiontheerrorisdisplayedcanbeadjustedwith"InMonitorDisplay" "Position".
Control Setswhether"SignalMonitoring"isusedornot. On, Off
ErrorHold Setsthelengthoftimefordisplayingerrors,whentheyaredetected. On (No time out):Errorscontinuetobedisplayed.Tohidethedisplayederror,presstheRESET
buttonwhenclosingtheOSDmenu. On (5 sec.): Thedisplayederrorwilldisappear5secondsaftertheinitialdetection. Off:Onlydisplayserrorsduringtheperiodwhentheyaredetected.Thedisplayederrormessagewill
disappearoncetheerrorends.
NoSignal/ UnsupportedSignal
Displaysanerrorwhenthereisnosignalorthesignalisnotsupported. On, Off
2SILinkOrder Displaysanerrorwhenthecablesinsertedintotheinputterminalsareinthewrongorderwhenusing signalsinputvia"2SampleInterleave". On, Off
ErrorLog Displayserrorhistory.
ScreenCapture Capturesthescreen.
Capture Capturesthescreen.Thedataissavedunderthename"YYYYMMDD_hhmmss.bmp"or "YYYYMMDD_hhmmss.jpg"intherootfolderoftheUSBmemory.
FrameHold Pausesthevideo. On, Off
CaptureSource Selectsthesourcestocapture. All:Everythingiscapturedincludingvideoassistancefunctionssuchasmarkersandwaveform
monitoraswellasOSDmenu. Video:Onlyvideosignalsarecaptured.
FileType SetstheFileTypeoftheimagetocapture. Bitmap, JPEG
CreateHDR/SDR CompareFile
CreatesafilethatletsyoucomparethebrightnessofHDRandSDRimagesonacomputer.When saving,[_pc]isappendedtothefilename. On, Off
PlaybackFile Playsbackcapturedimages. Select File:Selectsafile. Execute:Playsbacktheimage.
Note
WhenplayingbackcapturedimagesonotherDP-V2410orPC,colormaynotbeplayedback precisely.
CannotreplayHDR/SDRcomparisonimageswith[_pc]inthefilenames.
FinishPlaybackFile Finishesplayback.
85OSD Menu
Item Setting Options (underline indicates factory default)
CameraLink SetsthefunctionstolinkwithCinemaEOScamerasandARRI/Panasoniccinemacameras.
Automatic Adjustment (CINEMAEOS)
Setswhetherornottolinktothecamera'simagequalitysettingwhen"CINEMAEOSSYSTEM"is selectedfor"PictureMode".(When"InputConfiguration"is"3G/HD-SDI"or"3G-SDIRAW") On, Off When"ColorGamut/Gamma/EOTF","ColorTemperature",and"ColorRange"areallsetto"On",the followingsettingsareconfigured.
ParameterofCinemaEOScamerasandDP-V2410
CinemaEOScameras DP-V2410
ColorSpace ColorGamut ColorTemperature
BT.709 ITU-RBT.709 D65
BT.2020 ITU-RBT.2020 D65
DCI-P3 DCI-P3 DCI-P3
DCI-P3+ DCI-P3+to709 D65
DCI-P3+toDCI-P3 DCI-P3
CinemaGamut CinemaGamutto709 D65
CinemaGamutto2020 D65
CinemaGamuttoDCI-P3 DCI-P3
RAWGamut CinemaGamutto709 D65
CinemaGamutto2020 D65
CinemaGamuttoDCI-P3 DCI-P3
CinemaEOScameras DP-V2410
Gamma/EOTF Gamma/EOTF HDRRange
CanonLog CanonLog(HDR)
CanonLog2 CanonLog2(HDR)
RAWGamma
CanonLog3 CanonLog3(HDR)
ST2084,PQ SMPTEST2084(PQ) 1000
Normal(BT.709) 2.2
WideDR
EOSStd.
DCI-P3 2.6
Color Gamut/Gamma/EOTF:Theimagequalityofthedisplaycorrespondstothecamera's settings. On, Off
Color Temperature:Theimagequalityofthedisplaycorrespondstothecamera'ssettings. On, Off
Display Color Gamut:Setsthecolorgamutshownonthedisplaywhenthecamera's"Color Space"issetto"CinemaGamut"or"DCI-P3+". ITU-R BT.709, ITU-R BT.2020, DCI-P3
86 OSD Menu
Item Setting Options (underline indicates factory default)
Automatic Adjustment(ARRI)
Setswhetherornottolinktothecamera'simagequalitysettingwhen"User6-7"isselectedfor "PictureMode".(When"InputConfiguration"is"3G/HD-SDI") On, Off
ParameterofARRICinemacameraandDP-V2410
ARRICinema camera
DP-V2410
ColorSpace DisplayColor Gamut
CDL/UserLUT ColorGamut Gamma/ EOTF
HDRRange
REC709 ITU-R BT.709
2.2
REC2020 ITU-R BT.2020
2.2
WideGamut LogC
Rec2100-PQ- 1K-100
ARRI(Rec2100- PQ-1K-100)
ITU-R BT.2020
SMPTEST 2084(PQ)
1000
Rec2100-HLG- 1K-200
ARRI(Rec2100- HLG-1K-200)
ITU-R BT.2020
Hybrid Log-Gamma
UserLUT1-8 UserLUT1-8
User LUT:Setsthecolorgamutandgamma/EOTFshownonthedisplaywhen"Automatic Adjustment(ARRI)"issetto"On". Rec2100-PQ-1K-100, Rec2100-HLG-1K-200, User LUT 1-8
87OSD Menu
Item Setting Options (underline indicates factory default)
Automatic Adjustment (VARICAM)
Setswhetherornottolinktothecamera'simagequalitysettingwhen"User6-7"isselectedfor "PictureMode".(When"InputConfiguration"is"3G/HD-SDI") On, Off
ParameterofPanasonicCinemacameraandvideodisplay
Panasonic Cinema camera
DP-V2410
ColorSpace DisplayColor Gamut
CDL/UserLUT ColorGamut Gamma/ EOTF
HDRRange
V-709 ITU-R BT.709
2.2
V-Log V-LogtoV-709
VARICAM(V-Log toV-709)
ITU-R BT.709
2.2
UserLUT1-8 UserLUT1-8
User LUT:Setsthecolorgamutandgamma/EOTFshownonthedisplaywhen"Automatic Adjustment(VARICAM)"issetto"On". V-Log to V-709, User LUT 1-8
Anamorphic WhenaCanoncameraisconnected,displaysinaccordancewiththesettingswhenanamorphic lensdisplaysettingsareincludedinthecamerametadata. On, Off
AreaMarker WhenanARRIcinemacameraisconnectedtothisdevice,the"HPosition","VPosition","Width", and"Height"forthe"AreaMarker"changedependingonthemetadata. ARRI Frame line 1A, ARRI Frame line 1B, Off
Note
Thiscannotbedisplayedwhen"MarkerPreset"is"Off".
Fan Allowsyoutolinkstoppingthefantothecamera'srecordingoperation(ForCinemaEOScameras, Canonprofessional-usevideocameras,orARRIcinemacamerasthatarecompatiblewiththisvideo display).Set"FanControl"under"SystemSettings"to"On". On, Off
Note
Ataroomtemperature(25C),thefanremainsoffforapproximatelyoneminutewhentheAC powersupplyisusedandtenminuteswhentheDCpowersupplyisused.Selectthetypeof powersupplyaccordingtothepurposes.
Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage"Fanwillbe rotatedasthetemperatureishigh."isdisplayedandthefanstartsrotatingapproximatelyten secondslater.Sincethetemperatureofthemainunithasincreased,thefanrotatesfasterthan usual.
Thevideodisplay'sfanmaystartrotatingearlierthanthecamerabecausethetemperature insidethemainunithasincreased.
Thefanmaynotstopinsomeconditions,forexamplewhenusedatahightemperature.
CameraInformation Setsconditionstodisplaycamerainformation. Automatic:Camerainformationisdisplayedfor4secondswhentheinformationhaschanged. On:Camerainformationisalwaysdisplayed. Off:Camerainformationisnotdisplayed.
88 OSD Menu
Theinformationdisplayfunctionsthatcanbedisplayedvarydependingonthevideodisplay'ssettingsortheinput signalstatus.
=:Canview:Cannotview
Time Code
Audio Level Meter
Wave Form
Monitor
Vector Scope
Histo- gram
Frame Luminance
Monitor
Pixel Value Check
WithanSD-SDIsignal = =
Whilezooming:When "Zoom" "Type" isset to "Normal"
= =
When"FrameHold"is"On" (Forprogressivesignals)
= = = = =
When"FrameHold"is"On" (ForinterlacedorPsFsignals)
= = =
When"Peaking""Enable"issetto"Peaking1"or "Peaking2"
= = = = =
Duringexecutionof "PlaybackFile"under"Screen Capture"
Whenthedisplaypositionand"AudioLevelMeter" tobedisplayedisthesame
= = = = =
When"TestPattern"isdisplayed
When"MultiView(Quad)"isdisplayed = =
When"MultiView(Dual)"isdisplayed = = = =
When"SingleInputDualView"isdisplayed = = = = = =
When "Channel Settings" "PictureMode" "Type" isset to"L/R":When"MultiView (Dual)"or "SingleInputDualView"isdisplayed
= = = =
When "Channel Settings" "PictureMode" "Type" isset to"L/R",andwhenasinglescreen is beingused
= =
When "Picture FunctionSettings" "Compare View""Enable"issetto"On":When"SingleInput DualView" isset to"Off"andalsotheresolution is 4096x2160or3840x2160
= =
When "WaveFormMonitor" isdisplayed:When "WaveFormMonitor""SelectSignal" is"R","G", "B"
= = = = = =
When"WaveFormMonitor"isdisplayedand"Wave FormMonitor" "Size" is "Large":When the "Position"settings for "WaveFormMonitor"and "VectorScope"arethesame,orwhenusing"Multi View(Dual)"/"SingleInputDualView"display
= = = = = =
WhenanI/PsF4Ksignalisdisplayedononescreen andwhen the "WaveFormMonitor"and "Vector Scope""Position"settingsarethesame
= = = = = =
When there isnosignalor the inputsignal isnot supported
= = = =
Whendisplayingvideoatresolutionsotherthan 4096x2160/3840x2160/2048x1080/ 1920x1080
= = = =
89OSD Menu
Picture Function Settings
Thismenuisusedtosetvideoassistancefunctions,forexample.
Item Setting Options (underline indicates factory default)
Peaking Theoutlineisdisplayedinacolor,usedtocheckthefocus.Customizes"Peaking"andsetsitto "Peaking1"or"Peaking2".
Note
"Peaking"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture".
Cannotsetwhen"CompareView""Enable"is"On".
Enable SwitchesthepeakingdisplaymodeandalsosetspeakingtoOff. Peaking 1, Peaking 2, Off
Note
"Enable"changesto"Off"whenthepoweristurnedonagain.
Monochrome Displaysvideoinmonochrome. Peaking 1 (On, Off), Peaking 2 (On, Off)
Frequency Setsthecentralfrequencyofcontourenhancementsignals. Peaking 1 (Low, Middle, High), Peaking 2 (Low, Middle, High)
Range Setsthewidthoftherangetobecolored. -3 ~ 3 (0)
Color Setsthecolortobeused. White, Red, Green, Blue, Yellow, Cyan, Magenta
FalseColor Displaysdifferentcolorsforthevideo'sbrightnesslevelstomakeiteasiertochecktheexposureand brightnessdistribution.Customizes"FalseColor"andsetsitto"FalseColor1"or"FalseColor2".
Note
"FalseColor"cannotbedisplayedduringtheexecutionof"PlaybackFile"under"ScreenCapture".
Cannotsetwhen"CompareView""Enable"is"On".
Enable SwitchesbetweenFalseColordisplaymodeandnon-display. False Color 1, False Color 2, Off
Note
"Enable"changesto"Off"whenthepoweristurnedonagain.
Type Setsthetintcolordisplaymethod. Automatic:Setsinaccordancewiththe"Gamma/EOTF"settings. IRE, SMPTE ST 2084 (PQ), Hybrid Log-Gamma
Note
When"IRE"in"Type"isselected,"HDRRange"settingsbecomeinvalid.
HDR/SDRBorder SetswhethertotinttheSDR/HDRareas. 100, 200
90 OSD Menu
Item Setting Options (underline indicates factory default)
Range-SDR SetstheupperlimitfortheSDRarea. False Color 1 (On, Off), False Color 2 (On, Off) When"On"isselected,setsthesizeoftheareatobecolored.(incrementsof10) Monochrome/Brown:10 to 190(90*)(40) Brown/Monochrome:20to200(100*)(80) *When"HDR/SDRBorder"is"100"
Range-HDR Setsthetintcolorrange. False Color 1 (Automatic, Automatic (Over Range), Manual), False Color 2 (Automatic, Automatic (Over Range), Manual) Automatic:Setstheupperlimitautomaticallyinaccordancewiththe"Gamma/EOTF"settings.
When"Manual"or"Automatic(OverRange)"isselected,setsthesizeoftheareatobecolored. SMPTE ST 2084 (PQ):Thesettingsareasfollows.(100to1000:10increments,1000to4000: 100increments,4000to10000:1000increments) Blue/lightblue:250(150*)to400 Lightblue/green:400to1000 Green/yellow:600to4000 Yellow/orange:800to8000 Orange/red:1000to10000(Onlywhenusing"Manual") Hybrid Log-Gamma:Thesettingsareasfollows.(10increments) Blue/lightblue:250(150*)to300 Lightblue/green:300(200*)to500 Green/yellow:400(300*)to700 Yellow/orange:500(400*)to900 Orange/red:600(500*)to1000(Onlywhenusing"Manual")
*When"HDR/SDRBorder"is"100"
OverRange Displaysvideoinmonochrome,withtheareaswherethesetrangeisexceededareshowntinted.
Note
Cannotsetwhen"CompareView""Enable"is"On".
Enable Switchesthe"OverRange"On,Off. On, Off
Note
"Enable"changesto"Off"whenthepoweristurnedonagain.
Range(HDR) Automatic:When"Gamma/EOTF""SMPTEST2084"or"HybridLog-Gamma",onlytheareas thatexceedthe"HDRRange"settingaretinted.
Manual:Onlyareasthatexceedtherangesetat"SMPTEST2084(PQ)"or"HybridLog-Gamma" aretinted.
Whenyouselect"Manual",setsthereferencelevel. SMPTE ST 2084 (PQ):Setsthetintcolorrange.(100to1000:10increments,1000to4000:100
increments,4000to10000:1000increments) 100to10000 (1000)
Hybrid Log-Gamma:Setsthetintcolorrange.(10increments) 100to1000 (1000)
Range(SDR) Setsthetintcolorrange.(1increments) 512to1023 (940)
91OSD Menu
Item Setting Options (underline indicates factory default)
2020OutsideofGamut View
When"ITU-RBT.2020"isselectedfor"PictureMode"or"ColorGamut",displaysvideoin monochrome,withtheareaswherethecolorgamutexceedstheselectedcolorgamutshowninred.
Note
Cannotsetwhen"CompareView""Enable"is"On".
Enable SwitchesbetweenOnandOfffor"2020OutsideofGamutView". On, Off
Note
"Enable"changesto"Off"whenthepoweristurnedonagain.
ColorGamut Setsthe"ColorGamut"tobesetasoutofcolorgamut. ITU-R BT.709, Native
Range Setstherangewhentintingdarkareas.(1increments) 0to512 0:Tintsalldarkareas. 512:Darkareasatthesetvaluesorlessarenottinted.
Monochrome Videoisdisplayedinmonochrome. On, Off
Note
Cannotsetwhen"CompareView""Enable"is"On".
Whenthepoweristurnedoffandon,becomes"Off".
BlueOnly Cutsredandgreensignals,anddisplaysonlybluesignalsinmonochrome. On, Off
Note
"BlueOnly"cannotbesetwhen"CDL/UserLUT"isasettingotherthan"CDL1-8"or"Off".
Cannotsetwhen"CompareView""Enable"is"On".
Whenthepoweristurnedoffandon,becomes"Off".
RedOff Videoisdisplayedwithredsignalscut. On, Off
Note
Cannotsetwhen"CompareView""Enable"is"On".
Whenthepoweristurnedoffandon,becomes"Off".
GreenOff Videoisdisplayedwithgreensignalscut. On, Off
Note
Cannotsetwhen"CompareView""Enable"is"On".
Whenthepoweristurnedoffandon,becomes"Off".
BlueOff Videoisdisplayedwithbluesignalscut. On, Off
Note
Cannotsetwhen"CompareView""Enable"is"On".
Whenthepoweristurnedoffandon,becomes"Off".
BacklightScan "BacklightScan"partiallyturnsoffthebacklightareaandreducestheimageholdperiodwhen displayingimages. High, Low, Off
92 OSD Menu
Item Setting Options (underline indicates factory default)
CompareView Imageshavingdifferentimagequalitysettingsaredisplayedontheleftandrightscreensfor comparison.(When"PictureMode"forleftandrightscreensisthesame)
Note
"CompareView"cannotbesetinthefollowingcases:
- When"ChannelSettings""PictureMode""Type"is"L/R" - When"Peaking","FalseColor","OverRange"or"2020OutsideofGamutView""Enable"
"On"
- When"Monochrome","BlueOnly","RedOff","GreenOff"or"BlueOff""On" - ForSD-SDIsignals
Whenasignalwitharesolutionof2Korsmallerisdisplayedonasinglescreen,changesto "SingleInputDualView".
Enable SetsComparisonmodeOnorOff. On, Off
Note
When"HDR/SDR"isselectedfor"Type"and"Enable"issetto"On","BoostContrast" becomes"On".
Type Setsthetypeoftheimagetocompare. Automatic:"HDR/SDR"when"Adjustment""CDL/UserLUT"is"Off",otherwisesetat"CDL/User
LUT". HDR/SDR:HDRandSDRimagesaredisplayed. CDL/User LUT: Theimageonwhich"CDL"or"UserLUT"isappliedisdisplayedonlyintheleft
screen.
HDR/SDRConvert Method
SetsthedisplaymethodforthescreensetinSDRwhen"Type"issetto"HDR/SDR"or"Automatic ("HDR/SDR"settings)". 2020 HDR to 709 SDR, 2020 HDR to 2020 SDR:Settingdiffersaccordingtothe"Gamma/EOTF" settings. "SMPTEST2084(PQ)":The"UserLUT"correspondingtoeachsettingisapplied. "HybridLog-Gamma":The"UserLUT"correspondingtoeachsettingisapplied. "CanonLog(HDR)","CanonLog2(HDR)","CanonLog3(HDR)":"CanonLog","CanonLog2"or "CanonLog3"isapplied. "S-Log2(HDR)","S-Log3(HDR)":"HDRRange"setting"100"isset.
User LUT 1-8:Thespecified"UserLUT"isapplied.Afterapplying"UserLUT"theadjustmentinside thedisplayfixes"ColorGamut"at"ITU-RBT.709"and"Gamma/EOTF"at"2.4".
Off:Onlybrightnessislowered.
AdjuststheSDRimagequalitywhen"Type"issetto"HDR/SDR"or"Automatic("HDR/SDR" settings)". Contrast (SDR):SetsthecontrastontheSDRside. 500 to 2000 (1000) Color Temperature (SDR):SetsthecolortemperatureontheSDRside. Normal, D93, D65, D65 Custom, DCI-P3 Gain (SDR):SetsthegainontheSDRside. -15to15 (0)
UserLUTTarget1 Setsthecomparisontargetwhen"Type"issetto"CDL/UserLUT"or"Automatic("UserLUT" settings)". User LUT 1toUser LUT 8, Off
93OSD Menu
Network/IMD Settings
Makethesettingsfornetworkingofthemainunitandremoteoperationbyexternaldevices.
Item Setting Options (underline indicates factory default)
LAN Configuresvideodisplay'snetworksettings.
Note
Settingisdisabledwhen"PoweronSetting"issetto"User1-3".
ConfigureanIP Address
Automatic:ConfiguresanIPaddressautomaticallywithDHCP/AutomaticIP. Manual:ConfigureanIPaddressandsubnetmaskmanually.
Display 192.168.0.1
SubnetMask 255.255.255.0
Wi-Fi ThisisusedtoconnectthevideodisplaytoanetworkusingWi-Fiandcontrolitfromanexternal controldevice.( 33)
Control SetstheWi-Ficonnectionmethod. Infrastructure:ThismethodconnectstoWi-Fiviaanaccesspoint. Access Point:Thisdeviceactsasanaccesspoint,andthismethodconnectsthedevicedirectlyto
theWi-Fidevice. Off:DoesnotconnecttoWi-Fi.
Infrastructure Setstheaccesspointtoconnectto.Atfactorysettings,theaccesspointtoconnecttoisnot configured. Password:Youmayspecifyapasswordifneededbyusingupto24alpha-numericalcharacters
andsymbols.Thedefaultpasswordisblank.
AccessPoint Configurestheaccesspoint. SSID:EntertheSSID.Thiscanbesetusingupto24alpha-numericalcharactersandsymbols. Frequency:Setsthecommunicationmode. 2.4 GHz, 5.0 GHz Channel:Setsthechanneltouseforcommunication. Whensetto"2.4GHz":1to13 (incrementsof1) Whensetto"5.0GHz":36, 40, 44, 48 Password:Enterthepassword.Thisissetusingbetween8and24alpha-numericalcharactersand
symbols. Remembertochangethedefaultpassword.Thedefaultpasswordistheserialnumber.Theserial numberistheindividual12-digitnumberassignedtoyourproduct,andcanbecheckedonthe "SystemInformation"screen.
Web SettingsforoperatingthisdeviceremotelyusingaWebbrowser.( 35)
Control Setwhetherornottoreceivecontrolsignalsfromanexternaldevice,connectedusingnetwork connectionorWi-Ficonnection,inordertooperatethevideodisplayremotelyfromthedevice'sweb browser. On, Off
UserID EntertheuserID.Thisissetusingupto16alpha-numericalcharactersandsymbols.Thedefault userIDis"user".
Password Enterthepassword.Thisissetusingbetween8and16alpha-numericalcharactersandsymbols. Thedefaultpasswordistheserialnumber.Theserialnumberistheindividual12-digitnumber assignedtoyourproduct,andcanbecheckedonthe"SystemInformation"screen.
94 OSD Menu
Item Setting Options (underline indicates factory default)
DisplaySettingLink SettingsarelinkedbetweendisplaysconnectedviaLAN.Thisdevice'ssettingvaluesareappliedto alllinkeddisplays. Adjustment, Channel, Adjustment/Channel, Off *Beforelinkingsettings,checkthatthefollowingconditionsaremet. aTurnonthepowertothisdisplayandthedisplay(s)tolinkwith,andcheckthattheyareall recognizedonthenetwork
bChangetheadjustmentorchannelandcheckthattheotherdisplay(s)alsochange
Thedevicesandfirmwareversionsthatcanbelinkedareshownbelow. DP-V2410:Version1.4orhigher DP-V2420/DP-V2421:Version1.3orhigher DP-V1710/DP-V1711:Version1.3orhigher DP-V2411:Version1.2orhigher DisplaysnotconnectedcanberemovedwiththeRESETbutton.
Note
Operatingthebuttonsonthisdisplaywillreflectsettingvaluechangesinall.Linkedoperations usingPayloadID,HDMI,Camera,etc.willnotreflectthesettingschanges.
Ifadisplaymodelhasfunctionswithdifferentmenusettingsorsettingranges,somesettings willnotbecorrectlyexported(settingswillnotbechanged,willreverttofactorydefaults,etc.)
Inanenvironmentwherecommunicationcannotbedoneproperly,suchaswhenthenetwork environmentisunstableorthebandwidthisinsufficient,settingsmaynotlinkproperly.Only connectdisplaystobecontrolledtotheLAN.IfaDisplayControllerisconnected,itmaynot operateproperly.
Upto32displayscanhavetheirsettingslinked.
InMonitorDisplay ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperate thevideodisplayusinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersand tallylightsonthescreen.Youcaninputanycharactersyoulikedirectlyfromthisvideodisplay.( 32)
Control Setswhetherornottoreceivethecontrolsignalfromtheconnecteddevice. TSL Ver. 5.00, Off Manual:Selecttoinputthecharactersonthisvideodisplay.Doesnotreceiveacontrolsignalfrom
theconnecteddevice.
Position Thissetswhetherthecharactersandtallylightswillbedisplayedatthetoporthebottom. Top, Bottom
ManualDisplay Type
Automatic:ChangesdisplayinaccordancewiththeInputConfiguration. Single:Single-screendisplay. Dual A,B, Dual C,D:Dual-screendisplay. Quad A,B,C,D:Quadruple-screendisplay.
Note
When"FunctionSettings""SignalMonitoring""Control"issetto"On"then"Manual DisplayType"isfixedto"Automatic".
ManualString Manual String (Single, Dual/Quad A, Dual/Quad B, Dual/Quad C, Dual/Quad D, Single Dual L, Single Dual R): With"Control"setto"Manual",select"ManualString"andsetthe characterstodisplay.Youcaninputupto16alphanumericcharacters.
95OSD Menu
System Settings
Thismenuisusedtoconfiguresettingsrelatedthesystemofthevideodisplay.
Item Setting Options (underline indicates factory default)
Function/ChannelButton SetsthefunctionorchanneltoassigntotheFbuttonsorCHbutton.
Display Function/Display Function(CDL)
SetsthefunctiontoassigntotheFbuttonsofthemainunit.SelectanFbuttonandassigna functionfromthefollowinglist( 99).ThefactorydefaultsforthemainunitFbuttonsisasfollow: Normalmode
F1:Picture Mode F2:Brightness F3:TC/ALM F4:WFM/VEC F5:Histogram/Frame Luminance F6:Pixel Value Check F7:Zoom Preset F8: Boost Contrast
CDLmode F1:CDL/User LUT F2:CDL SOP/SAT F3:CDL/User LUT Bypass F4:Single Input Dual View F5:False Color F6:Over Range F7:2020 Outside of Gamut View F8:Compare View
Note
Whenchangingchannelswith"ChannelUP/DOWN",thechannelswith"InputConfiguration" ( 60)setto""areskipped.
WhenanymarkersettingsarechangedusinganFbutton,thosechangeswillbeappliedto "Enable"underthecurrentlyselected"MarkerPreset".
"HideOSD"isafunctiontohideallOSD.When"On"isselected,OSD,"BackgroundColor" and"Separator"arehiddenbutthemenucanbeused.
DisplayChannel SetsthechanneltoassigntotheCHbuttononthedisplay. SelectaCHbuttonandregisterachannelnumber.Alistofsettingsunderthemenu"Channel Settings"( 60)isdisplayed.
Language SetsthelanguageoftheOSDmenuandmessages. English, ,
Date/Time Setstheyear/month/date/hour/minute.
96 OSD Menu
Item Setting Options (underline indicates factory default)
DisplayName Setsthenameofthemainunit.Youcaninputupto16alphanumericcharacters.
OSDSettings
Banner Setsthebannerdisplaymethodforthechannelname,signalinformation,andstatusofthevideo display. Automatic Display:Automaticallydisplaysthebannerwhentheinputsignalorpicturemodeare
changed. On, Off
Picture Mode:Setswhethertodisplay"PictureMode". On, Off
Time Out: Thebannerautomaticallydisappears. On, Off
FunctionButton Guide
On:YoucandisplaythelistoffunctionsassignedtoanFbuttononthevideodisplaybypressingthe jogdialwhileOSDisclosed.
Off:FunctionButtonGuideisnotdisplayed.
OSDPosition Mode 1 (4096x2160):OSDisdisplayedina4096x2160area. Mode 2 (3840x2160):OSDisdisplayedina3840x2160area.
OSDSize SetsthesizeoftheOSDmenu. Large, Small
ProtectSettings Locksthesettingssotheycannotbechanged.WhenyoupresstheMENUbutton,"Signal/System Information"appears,butotheroperationsaregrayedoutbecausetheyarelocked.
Password Setapasswordtoprotectsettings.Useafour-digitnumber(0000to9999).Theinitialpasswordis blank.
ProtectTarget YoucanremovePictureModeandSelectChannelfromtheitemstobeprotected. Picture Mode:Select"On"toprotector"Off"toexcludesettingsfor"PictureMode".
On, Off Select Channel:Select"On"toprotector"Off"toexcludesettingsfor"SelectChannel".
On, Off Function Settings:Select"On"toprotector"Off"toexcludesettingsfor"FunctionSettings".
On, Off
Protect Select"OK"toprotect.Whenapasswordhasbeenset,enterthepasswordandselect"OK".
UnlockingProtectSettings
Movetheselectionframeto"Protect"andpressthejogdialforapproximately3seconds.Whena passwordhasbeenset,enterthepasswordandselect"OK".
PowerIndicator/ButtonLEDSettings
PowerIndicator Brightness
Adjuststhebrightnessofthepowerindicatoronthemainunit.Thegreaterthenumberis,thegreater thebrightness. Off, 1to5 (3)
DisplayButton LED
SetstheFbuttonsandthelampontheface. On, Off
ButtonName LightingTime (sec.)
Setsthetime(sec)untilthelamponthefacegoesoutifnooperationisperformed. 60, 30, 10, 5
97OSD Menu
Item Setting Options (underline indicates factory default)
FanSettings Setstheoperationofinternalfan.
FanControl Makesthefanrotatefasterbeforestoppinginordertopreventtheinternaltemperaturefrom increasing,whenthefanisstoppedmanually. On, Off
FanStop Thefancanbestoppedmanuallywhen"FanControl"issetto"On".Thefannoisecanbemade silentwhenthevideodisplayisusedduringshootingorwhensilenceisnecessary. On, Off
Note
Ifthemessage"Invalidoperationduetohightemperature."isdisplayed,thefancannotbe stoppedevenwhen"On"isselectedforthisitem.Waituntiltheinternaltemperaturelowers.
Ataroomtemperature(25C),thefanremainsoffforapproximatelyoneminutewhentheAC powersupplyisusedandtenminuteswhentheDCpowersupplyisused.Selectthetypeof powersupplyaccordingtothepurposes.
Ifthetemperatureinsidethemainunitincreaseswhilethefanisoff,themessage"Fanwillbe rotatedasthetemperatureishigh."isdisplayedandthefanstartsrotatingapproximatelyten secondslater.Sincethetemperatureofthemainunithasincreased,thefanrotatesfasterthan usual.
Select"Off"torestartthefan.Thefanrotatesfasterthanusual.
Thefanmaynotstopinsomeconditions,forexamplewhenusedatahightemperature.
CompatibleSettings SetscompatibilitywithHDMIdevicesandoperationoffunctionsthatdifferaccordingtotheversion ofthevideodisplaysfirmware.
HDMI SetstheconnectioncompatibilitywithHDMIequipment. Normal:Allformatsaresupported. Compatible 1:Setthisoptionwhenvideoisnotplayedcorrectlyin"Normal".HDRsignalsofa
luminancehigherthanthatofthedisplaymainunitarenotsupported. Compatible 2:Setthisoptionwhenvideoisnotplayedcorrectlyin"Normal"or"Compatible1".
HDRsignalsarenotsupported. Compatible 3:Setthisoptionwhenvideoisnotplayedcorrectlyinothersettings.
"4K50.00P/60.00P"andHDRsignalsarenotsupported.
ColorRange Normal:Setsthe"ColorRange"settingtonewtypesinfirmwareVersion1.3orlaterforthisvideo display.
Compatible:Setsthe"ColorRange"settingtoconventionaltypesinfirmwareVersion1.2orearlier forthisvideodisplay.
Firmware/LicenseUpdate Thisfunctionisusedtoupdatethevideodisplayfirmware.RefertotheCanonwebsitefordetailed information.
98 OSD Menu
Item Setting Options (underline indicates factory default)
Export/Import Setstheexport/importmainmenusettings.
Note
Thefollowingsettingscannotbeexportedorimported.
Adjustment TargetvaluesofCalibration(includingcalibrationresults)
DisplaySettings ZoomPreset,FrameHold
PictureFunction Settings
Peaking(Enable),FalseColor(Enable),OverRange(Enable), 2020OutsideofGamutView(Enable),TestPattern,Monochrome, BlueOnly,RedOff,GreenOff,BlueOff,CompareView(Enable)
Network/IMD Settings
LAN,Wi-Fi,DisplaySettingLink (LANandWi-Fi:onlyexport/importvianetwork)
SystemSettings Date/Time,FanStop,Export/Import,PoweronSetting
UserLUTdatacannotbeexportedorimportedto"User1to3"under"Target".
Dataexportedfromthisproductmaynotbeimportedtoproductsofwhichfirmwareversion isearlierthantheversionofthisproduct.Toimportdata,updatethefirmwaretothelatest version.
Export Target:Selecttheexportdestination. USB:ExporttoaUSBmemory. User 1-3:Exporttothebuilt-inmemoryofthemainunit. LAN:ExportstoadisplayconnectedwithaLAN. Filename:Changesthefilenamewhen"Target"issetto"USB"or"User1-3".Factorydefaultis
"dinfo_dpv2410.dat".YoucanchangethenameofthefiletobeexportedtotheUSB memorywithin16one-bytecharactersincludingalphabeticalcharacters,numbers,and symbols.
Display:SelectsthedisplaywiththesettingstoexportfromthedisplaysconnectedviaLANwhen "Target"issetto"LAN".
Execute:Performsexport.
Import Target:Specifythedestinationtosavethefiletobeimported. USB, User 1-3
Filename:Displaysfileswiththeextension".dat"soyoucanselectfromamongthem. Settings (All, Adjustment, Channel Settings, Display Settings, Audio Settings, Marker Settings, Function/Network/System Settings):Selectthesettingstoimport. Execute:Performsimport.
PoweronSetting Youcanselectthestateofthedisplaywhenthepoweristurnedon. Last memory:Launcheswiththesamesettingsaswhenthepowerwasturnedofftheprevious
time. User 1-3:Itstartsupwiththesettingssavedin"User1-3"under"Export".
ResetAllSettings Returnsallsettingstofactorydefault.Whenselected,themessage"Resetallsettingstofactory defaults?"appears. OK:Performsreset. Cancel:Returnstothepreviousscreenwithoutresetting.
99OSD Menu
ThefollowingfunctionscanalsobeassignedtoanFbutton( 95).
Item Options Item Options
Adjustment PictureMode ChannelSettings ChannelUP
Contrast ChannelDOWN
Brightness SelectInputSignal
Chroma AudioInput
ChromaUp SingleInputDualView
Sharpness CH1toCH20
BacklightControl DisplaySettings ScreenScaling
Gamma/EOTF Anamorphic
HDR ScalingMethod
HDRRange ZoomPreset
BoostContrast Zoom1
HDR/SDRView Zoom2
Gain Zoom3
Bias FrameHold
xy BackgroundColor
PictureMode SMPTE-C AudioSettings SDIGroup
EBU CHL
ITU-RBT.709 CHR
ITU-RBT.2020 Volume
AdobeRGB AudioSwitch
DCI-P3 MarkerSettings MarkerPreset
User1(2020PQ) Marker1
User2(2020HLG) Marker2
User3(DCIPQ) Marker3
User4(DCIPQD65) Marker4
User5~User7 Marker5
CINEMAEOSSYSTEM AspectMarker
ACESproxy(ver.1.0.1) SafetyZoneMarker1
CDL/UserLUT CDL/UserLUT SafetyZoneMarker2
CDLRGB AreaMarker
CDLR CenterMarker
CDLG GridMarker
CDLB
CDLSOP/SAT
CDLSlope
CDLOffset
CDLPower
CDLSaturation
CDL/UserLUT Bypass CDLExport/Import
100 OSD Menu
Item Options
FunctionSettings TC/ALM
TimeCode
AudioLevelMeter
WFM/VEC
WaveFormMonitor
WFMSelectSignal
VectorScope
Histogram/FrameLuminance
Histogram
FrameLuminanceMonitor
PixelValueCheck
SignalMonitoringLog
Capture
CameraInformation
PictureFunction Settings
Peaking
Peaking1
Peaking2
FalseColor
FalseColor1
FalseColor2
OverRange
2020OutsideofGamutView
Monochrome
BlueOnly
RedOff
GreenOff
BlueOff
BacklightScan
CompareView
SystemSettings SignalInformation
HideOSD
FanStop
101OSD Menu
Signal Information
Showsthesignalinformation.When"SelectInputSignal"is"QuadInput",informationfortheentiresignalandeach inputisdisplayed.Selectasignalwiththejogdialaccordingtotheguideattoprightcornerofthemenu.Whensignal informationhasbeenobtainedalthoughitisnotdisplayedonthescreen,thecontentoftheinformationisgrayedout.
SDI Signal HDMI Signal
Item Display Example Item Display Example
Channel InputConfiguration
SelectInputSignal ImageDivision Format Resolution PictureRate,I/P/PsF* SDIPayloadID VideoStandard SamplingStructure,BitDepth PictureRate ScanningMethod
LinkNumber Colorimetry TransferCharacteristics
CH1 3G/HD-SDI(3G-A)
QuadInput Automatic Automatic 4096x2160 24.00P 89C34601 3G-SDI 4:4:4:4GBRA10-bit 24.00 Progressive/Progressive (Transport/Picture) Single/Link_1 UHD SDR-TV
Channel InputConfiguration Format Resolution PictureRate,I/P/PsF PixelEncoding,ColorDepth Matrix Range EOTF MaxLuminance(Peak/Avg.) DisplayLuminance(Max/Min) WhitePoint PrimaryColorRed PrimaryColorGreen PrimaryColorBlue
CH4 HDMI Automatic 4096x2160 60.00P 4:2:2YCbCr10-bit ITU-RBT.709 Full SMPTEST2084(PQ) 1000/500cd/m2
1000-0.005cd/m2
x=0.313,y=0.329 x=0.640,y=0.330 x=0.300,y=0.600 x=0.150,y=0.060
*Whenacontentisgrayedout,anasterisk"*"maybedisplayedindicatinglow"PictureRate"accuracysuchas"24.00P*".
System Information
Showsthevideodisplaystatusandnetworkinformation.
Item Display Example
Display DP-V2410
SerialNo. 000000000000
Firmware/LicenseVer. 1.4
UsageTime* 5h
IPAddress 192.168.0.1
SubnetMask 255.255.255.0
MACAddress FF:FF:FF:FF:FF:FF
Wi-FiIPAddress 192.168.0.1
Wi-FiSubnetMask 255.255.255.0
*The"UsageTime"isnotalways"0"whenyoupurchasethedisplayduetofactoryinspection.
102 Main specifications/Performance
Main specifications/Performance
Panel
PanelType IPSLCDpanel
ScreenSize 24inch(61.1cm)
AspectRatio 17:9
Resolution 4096x2160(8.8megapixels)
ActiveDisplayArea Approximately540.7x285.1mm
PixelPitch 132m/193ppi
PanelDriver 1024gradations,10-bitforeachRGBcolor
Image quality
Brightness(Standard) 100cd/m2
ViewAngle(Up,Down,Left,Right) 89(contrastratio10:1orhigher)
SurfaceTreatment Anti-glarecoating
General
BacklightType RGBLED,directdowntype
Power RatedVoltage:100240VACRatedFrequency:50/60Hz 24V28VDCMax.8.9A,XLRterminal
Powerconsumption Atmaximumload(includingchangeinbrightnessthroughaging):Approximately210W Atfactoryshipment:Approximately160W
Environmental Conditions
Operating Temperatureandhumidity:040C(32104F),2085%RH(nocondensation) recommended:1530C(5986F)
Pressure:7001060hPa
Storage/ Transporting
Temperatureandhumidity:-2040C(-4104F),2085%RH(nocondensation) 4160C(105140F),2030%RH(nocondensation)
Pressure:7001060hPa
Dimensions(widthxheightxdepth) Includingstands:Approx.594399187mm(23.415.77.4in.) Mainunitonly,excludingprotrusions:Approx.594378106mm(23.414.94.2in.)
Weight Approximately12kg(26.4lb)
MountingHolePitch VESAstandard100x100mm(3.9x3.9in.)
103Main specifications/Performance
Interface
Input 3G/HD/SD-SDI 4(1systems)BNC(75)receptacleterminal 3G-SDI:SMPTE2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9compliant HD-SDI:SMPTE2048-2/274M/292-1/296/428-19/428-9compliant SD-SDI:CompliantwithSMPTE-259M
HDMI 1(1system)typeAterminalContentsprotectionstandard:HDCP2.2
Output 3G/HD-SDI 4(1pass-thrusystems)
Headphone 1stereominijack,Supportedimpedance:32to64
Control USB 1USBAreceptacleterminal UniversalSerialBusSpecificationRevision2.0compliantLS(LowSpeed)/FS(Full Speed)/HS(HighSpeed)modecompatible CompliantwithEnhancedHostControllerInterfaceSpecificationforUniversalSerial BusRevision1.0
LAN 1RJ-45terminal CompliantwithIEEE802.310BASE-TX/IEEE802.3u100BASE-TX
Weight and dimensions are approximate. Error and omissions excepted. The information in this manual is verified as of May 2019. It is subject to change without notice.
104 Main specifications/Performance
Dimensions
Main Unit
Panel center
594 (23.4)
100 (3.9)
106 (4.2)
187 (7.4)
493 (19.4) 355.4 (14.0)
61 (2.4)
41 (1.6)40 (1.6)
47.5 (1.9)
10 (0.4)
10 0
(3 .9
)
4-M4 Depth: 8 (0.3) (MAX.)
4-M4 Depth: 7 (0.3) (MAX.)
31 2
(1 2.
3) 37
8 (1
4. 9)
39 9
(1 5.
7)
23 0
(9 .1
)
37 4
(1 4.
7)
14 4
(5 .7
)
16 0
(6 .3
)
21 (0
.8 )
5 (0
.2 )
15 (0
.6 )
15 (0
.6 )
567.6 (22.3)
4- 4.5 (0.2)
Unit:mm(inch)
Front
Rear
Side
Bottom
105Appendix
Appendix Supported Signal Format
SDI
Formatswith"*"supportaudiosignals.
Transmission method Signal format Color format Color depth Standards
SD-SDI 720x487i59.94/60Hz 4:2:2YCbCr 10-bit SMPTE-259M
720x576i50.00Hz
HD-SDI 1280x720P59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE2961280x720P50.00Hz*
1280x720P29.97/30.00Hz
1280x720P25.00Hz*
1280x720P23.98/24.00Hz*
1920x1080i59.94/60.00Hz* SMPTE292-1 SMPTE274M1920x1080i50.00Hz*
1920x1080P29.97/30.00Hz*
1920x1080PsF29.97/30.00Hz*
1920x1080P25.00Hz*
1920x1080PsF25.00Hz*
1920x1080P23.98/24.00Hz*
1920x1080PsF23.98/24.00Hz*
2048x1080i59.94/60.00Hz
2048x1080i50.00Hz
2048x1080P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
2048x1080PsF29.97/30.00Hz
2048x1080P25.00Hz
2048x1080PsF25.00Hz
2048x1080P23.98/24.00Hz
2048x1080PsF23.98/24.00Hz
3G-SDI (LevelA)
1280x720P59.94/60.00Hz* 4:4:4RGB 4:4:4YCbCr
10-bit SMPTE425-1 SMPTE296
1280x720P50.00Hz* 4:4:4RGB 4:4:4YCbCr
10-bit
1280x720P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
10-bit
1280x720P25.00Hz* 4:4:4RGB 4:4:4YCbCr
10-bit
1280x720P23.98/24.00Hz* 4:4:4RGB 4:4:4YCbCr
10-bit
1920x1080P59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE274M
106 Appendix
Transmission method Signal format Color format Color depth Standards
3G-SDI (LevelA)
1920x1080i59.94/60.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit SMPTE425-1 SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P50.00Hz* 4:2:2YCbCr 10-bit
1920x1080i50.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF29.97/30.00Hz 4:4:4RGB* 10-bit
12-bit
4:4:4YCbCr* 12-bit
4:4:4YCbCr* 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF25.00Hz 4:4:4RGB* 10-bit
12-bit
4:4:4YCbCr* 12-bit
4:4:4YCbCr* 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
1920x1080P23.98/24.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF23.98/24.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
2048x1080i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:2:2YCbCr
2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2
107Appendix
Transmission method Signal format Color format Color depth Standards
3G-SDI (LevelA)
2048x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:2:2YCbCr
2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2
2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
108 Appendix
Transmission method Signal format Color format Color depth Standards
3G-SDI (LevelB)
1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M1920x1080i59.94/60.00Hz 4:4:4RGB
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr* 12-bit
1920x1080P50.00Hz 4:2:2YCbCr 10-bit
1920x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr* 12-bit
1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
1920x1080PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
2048x1080i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
2048x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
109Appendix
Transmission method Signal format Color format Color depth Standards
3G-SDI (LevelB)
2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
110 Appendix
Transmission method Signal format Color format Color depth Standards
3G-SDI (LevelB)
2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
DualLink3G-SDI (LevelA)
1920x1080P59.94/60Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit SMPTE425-3 SMPTE274M
4:2:2YCbCr 12-bit
1920x1080P50Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit SMPTE425-3 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
2048x1080P50Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
2048x1080P47.95/48Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
DualLink3G-SDI (LevelB)
1920x1080P59.94/60Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit SMPTE425-3 SMPTE372 SMPTE274M4:2:2YCbCr 12-bit
1920x1080P50Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
2048x1080P59.94/60Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit SMPTE425-3 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
2048x1080P50Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
2048x1080P47.95/48Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
111Appendix
Transmission method Signal format Color format Color depth Standards
DualLink3G-SDI SquareDivision (LevelB)
3840x2160P29.97/30Hz 4:2:2YCbCr 10-bit SMPTE425-3 SMPTE372 SMPTE274M
3840x2160PsF29.97/30Hz
3840x2160P25Hz
3840x2160PsF25Hz
3840x2160P23.98/24Hz
3840x2160PsF23.98/24Hz
4096x2160P29.97/30Hz SMPTE425-3 SMPTE372 SMPTE2048-2
4096x2160PsF29.97/30Hz
4096x2160P25Hz
4096x2160PsF25Hz
4096x2160P23.98/24Hz
4096x2160PsF23.98/24Hz
DualLink3G-SDI 2SampleInterleave (LevelB)
3840x2160P29.97/30Hz 4:2:2YCbCr 10-bit SMPTE425-3 SMPTE372 SMPTE274M
3840x2160P25Hz
3840x2160P23.98/24Hz
4096x2160P29.97/30Hz SMPTE425-3 SMPTE372 SMPTE2048-2
4096x2160P25Hz
4096x2160P23.98/24Hz
QuadLinkHD-SDI 3840x2160i59.94/60.00Hz* 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE274M3840x2160i50.00Hz*
3840x2160P29.97/30.00Hz*
3840x2160PsF29.97/30.00Hz*
3840x2160P25.00Hz*
3840x2160PsF25.00Hz*
3840x2160P23.98/24.00Hz*
3840x2160PsF23.98/24.00Hz*
4096x2160i59.94/60.00Hz
4096x2160i50.00Hz
4096x2160P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4096x2160PsF29.97/30.00Hz
4096x2160P25.00Hz
4096x2160PsF25.00Hz
4096x2160P23.98/24.00Hz
4096x2160PsF23.98/24.00Hz
112 Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI (LevelA)
3840x2160P59.94/60.00Hz 4:2:2YCbCr* 10-bit SMPTE425-1 SMPTE274M
3840x2160i59.94/60.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P50.00Hz 4:2:2YCbCr* 12-bit
3840x2160i50.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF29.97/30.00Hz 4:4:4RGB* 10-bit
12-bit
4:4:4YCbCr* 12-bit
4:4:4YCbCr* 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF25.00Hz 4:4:4RGB* 10-bit
12-bit
4:4:4YCbCr* 12-bit
4:4:4YCbCr* 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB* 4:4:4YCbCr*
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF23.98/24.00Hz 4:4:4RGB 10-bit
12-bit
4:4:4YCbCr 12-bit
4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4096x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
113Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI (LevelA)
4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2
4096x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2
4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit
114 Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI 2SampleInterleave (LevelA)
3840x2160P59.94/60Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE274M3840x2160P50Hz 4:2:2YCbCr 10-bit
3840x2160P29.97/30Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4096x2160P50Hz 4:2:2YCbCr 10-bit
4096x2160P47.95/48Hz 4:2:2YCbCr 10-bit
4096x2160P29.97/30Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P25Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P23.98/24Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
QuadLink3G-SDI (LevelB)
3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M
3840x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr* 12-bit
3840x2160P50.00Hz 4:2:2YCbCr 10-bit
115Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI (LevelB)
3840x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE274M4:2:2YCbCr* 12-bit
3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF25.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4096x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4096x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:4:4X'Y'Z' 4:2:2YCbCr
12-bit
4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
116 Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI (LevelB)
4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2
4:2:2YCbCr 12-bit
117Appendix
Transmission method Signal format Color format Color depth Standards
QuadLink3G-SDI 2SampleInterleave (LevelB)
3840x2160P59.94/60Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE274M
3840x2160P50Hz 4:2:2YCbCr 10-bit
3840x2160P29.97/30Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P25Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
3840x2160P23.98/24Hz 4:4:4RGB 4:4:4YCbCr
12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P59.94/60Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2
4096x2160P50Hz 4:2:2YCbCr 10-bit
4096x2160P47.95/48Hz 4:2:2YCbCr 10-bit
4096x2160P29.97/30Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P25Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
4096x2160P23.98/24Hz 4:4:4RGB 12-bit/10-bit
4:4:4X'Y'Z' 12-bit
4:4:4YCbCr 12-bit/10-bit
4:2:2YCbCr 12-bit
118 Appendix
RAW
Signal format
3840x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz
4096x2160P59.94Hz,50.00Hz,29.97Hz,25.00Hz,24.00Hz,23.98Hz
HDMI
Signal format Color format/Color depth
640x480P59.94/60.00Hz 4:4:4RGB8-bit
800x600P60.00Hz
1024x768P60.00Hz
720x480P59.94/60.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit
720x576P50.00Hz
1280x720P59.94/60.00Hz
1280x720P50.00Hz
1920x1080P59.94/60.00Hz
1920x1080i59.94/60.00Hz
1920x1080P50.00Hz
1920x1080i50.00Hz
1920x1080P29.97/30.00Hz
1920x1080P25.00Hz
1920x1080P23.98/24.00Hz
2048x1080P59.94/60.00Hz
2048x1080P50.00Hz
2048x1080P29.97/30.00Hz
2048x1080P25.00Hz
2048x1080P23.98/24.00Hz
3840x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit
3840x2160P50.00Hz
3840x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit
3840x2160P25.00Hz
3840x2160P23.98/24.00Hz
4096x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit
4096x2160P50.00Hz
4096x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit
4096x2160P25.00Hz
4096x2160P23.98/24.00Hz
119Appendix
Image/Frame Display
SDI
Signal system Display Method
720x487 59.94/60.00 i 59.94/60.00 P
720x576 50.00 i 50.00 P
1280x720 23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
1920x1080 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
2048x1080 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
47.95/48.00 P 47.95/48.00 P
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
3840x2160 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
120 Appendix
Signal system Display Method
4096x2160 50.00 i 50.00 P
59.94/60.00 i 59.94/60.00 P
23.98/24.00 PsF 47.96/48.00 P*
25.00 PsF 50.00 P*
29.97/30.00 PsF 59.94/60.00 P*
23.98/24.00 P 47.96/48.00 P*
25.00 P 50.00 P*
29.97/30.00 P 59.94/60.00 P*
47.95/48.00 P 47.95/48.00 P
50.00 P 50.00 P
59.94/60.00 P 59.94/60.00 P
*:Displayingsameframe
121Appendix
HDMI
Signal system Display Method
640x480 59.94/60.00 P 59.94/60.00 P
800x600 60.00 P 60.00 P
720x480P 59.94/60.00 P 59.94/60.00 P
720x576 50.00 P 50.00 P
1024x768 60.00 P 60.00 P
1280x720 59.94/60.00 P 59.94/60.00 P
1280x720 50.00 P 50.00 P
1920x1080 59.94/60.00 P 59.94/60.00 P
1920x1080 59.94/60.00 i 59.94/60.00 P
1920x1080 50.00 P 50.00 P
1920x1080 50.00 i 50.00 P
1920x1080 59.94/60.00 i 59.94/60.00 P
1920x1080 29.97/30.00 P 59.94/60.00 P*
1920x1080 25.00 P 50.00 P*
1920x1080 23.98/24.00 P 47.96/48.00 P*
2048x1080 59.94/60.00 P 59.94/60.00 P
2048x1080 50.00 P 50.00 P
2048x1080 29.97/30.00 P 59.94/60.00 P*
2048x1080 25.00 P 50.00 P*
2048x1080 23.98/24.00 P 47.96/48.00 P*
3840x2160 59.94/60.00 P 59.94/60.00 P
3840x2160 50.00 P 50.00 P
3840x2160 29.97/30.00 P 59.94/60.00 P*
3840x2160 25.00 P 50.00 P*
3840x2160 23.98/24.00 P 47.96/48.00 P*
4096x2160 59.94/60.00 P 59.94/60.00 P
4096x2160 50.00 P 50.00 P
4096x2160 29.97/30.00 P 59.94/60.00 P*
4096x2160 25.00 P 50.00 P*
4096x2160 23.98/24.00 P 47.96/48.00 P*
*:Displayingsameframe
122 Error Messages
Error Messages
Message Description and Action
Calibration Failedtoinitializetheexternalsensor. SeeCA-310andCA-210instructionmanual.
Calibrationerror. Checktheinstallationandconnectionofthe externalsensorandretry( 23).
PerformmatrixcalibrationofCA-310andCA-210 ( 23).
Calibrationiscompleted. (Brightnesssettingislowerthantargetbrightness.)
Setthe"Luminance"incalibrationagain( 55).
Failedtodetecttheexternalsensor. Pleasechecktheconnectionwiththesensor.
CorrectlyconnecttheexternalsensortotheUSB portofthismainunit.
Network Communicationerror. IPaddressmaybeinconflictortheremaybea networkcommunicationerror.Checkthenetwork environment.
InvalidIPAddress. EnterthecorrectIPaddress.
InvalidSubnetMask. Enterthecorrectsubnetmask.
Displayisnotconnected. CheckthattheCanondisplaytowhichyouwishto exportthisvideodisplay'ssettingsandthisvideo displayarecorrectlyconnectedwithaLANcable.
Varioussettings, CDLexport
TheUSBmemoryisfull. UseanotherUSBmemoryordeletethecontentof thememory.
Failedtowritefile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.
LUT,Varioussettings, CDLimport
(LUTImport)"LUTType"isdifferent. (CDLImport)"FileType"isdifferent.
Selectthecorrectfileformat.
Failedtoreadfile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.
Failedtoimport. Thereisanerrorinthefiletobeimported.Checkthe file.
Noimportfile. Checkandensurethatthefilehasbeensavedtothe USBmemoryorimportedto"User1-3".
123Error Messages
Message Description and Action
Screen Capture
Failedtocapture. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.
InvalidSignal. Ascreendisplayingnovideoisbeingcapturedfor examplethereisnosignaloranunsupportedsignal isbeinginput.Checkthesignal,inputitagain,and captureit.
Copyprotectedsignal. Thesignalyoutriedtocapturemaybeprotectedby HDCP2.2whichisacopypreventionstandardfor HDMI.Inthiscase,thesignalcannotbecaptured. ChecktheHDMIsignal.
Failedtoplaybackfile. TheUSBmemoryorthefilemaybedefectiveor protected.ChecktheUSBmemoryorthefile.
Nocapturefile. Checkandensurethatthefilehasbeensavedtothe USBmemory.
Hardwareerror Backlighterror. Disconnectthepowercord,reconnectit,andthen turnonthepower. Ifthemessagepersists,contactCanonCustomer Center.
Fanerror.
Panelerror.
I/Ferror.
Systemerror.
Invalidoperationduetohightemperature. Thetemperatureinsidethemainunitishigh.Turnoff thepowerandwaituntilthefanstops.
Inputsignal NoSignal Displayedwhenthereisnovideosignalinput.
Unsupported Unsupportedvideosignalisinput.Checkthe supportedsignalformat( 105).
Operation Invalidoperation. Operationisdisabled.Checkthesettingitems.
"ProtectSettings"ison. TousetheOSDmenu,movetheselectionframe to"Protect"andpressthejogdialforapproximately 3seconds.
"CDL/UserLUTBypass"ison. When"CDL/UserLUTBypass"isturned"On",you cannotadjust"Power","Saturation","Offset",or "Slope".
InvalidPassword. Enterthecorrectpassword.
USBmemory USBmemoryisnotconnected. CorrectlyconnecttheUSBmemorytotheUSBport ofthismainunit.
UnsupportedUSBmemory. ChecktheUSBmemoryformatandmakesureitis notprotected.
Wi-Fiadapter Wi-FiAdaptorisnotconnected. CorrectlyconnecttheWi-FiadaptertotheUSB terminalofthevideodisplay.
FailedtoconnectWi-FiAccessPoint. Thepasswordmaybewrong,ortheremaybea networkcommunicationerror.Checkthenetwork environment.
124 Error Messages
Message Description and Action
FirmwareUpdate Noupdatefile. FirmwareupdatefilesarenotsavedonUSBmemory orothermedia.
Failedtoreadupdatefile. Thereisanerrorinthefile.Checkthefile.
Thefirmware/licensehasbeenalreadyupdated. Thisisthefilethatisupdatedonthevideodisplay.
DCpowersupply LowVoltage. IndicatesthattheinputvoltageoftheDCpower supplyhasbecomebelowapprox.22.5V.Checkthe voltageoftheDCpowersupply.
LowVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpower supplyhasbecomebelowapprox.21.0Vandthe powerwillbeturnedoff.Connecta23.5Vorhigher DCpowersupplyandpressthe buttontoturnon thepower.
InvalidVoltage,Turnoffpower. IndicatesthattheinputvoltageoftheDCpower supplyhasreachedapprox.35.8Vorhigher.Check theinputvoltageoftheDCpowersupply.
125Troubleshooting
Troubleshooting
Symptom Cause and Action
Powerdoesnotturnon. (Powerindicatordoesnotturnon.)
Pressthe button.
CheckthattheACpowersupplyorDCpowercordisconnected correctly.
Brightnessofthepowerindicatormaybeturnedoff.Turnitonand checkoncemore.
9
17
96
Thescreenisdark. Whenthepowerindicatordoesnotturnon: Pressthe button.
CheckthattheACpowersupplyorDCpowercordisconnected correctly.
9
17
Whenthepowerindicatorislitorange: Pressthe button.
9
Whenthepowerindicatorisflashingorange: Flashingonceevery3seconds: ContactCanonCustomerCenter.
Flashingtwiceevery3seconds: -Turnonthepowerwiththe button. -Thetemperatureofthedisplay rises(orfalls)dependon operationenvironment.Checkthe environmentalconditions( 102)and donotuseindirectsunlight. -Ifthepowerstilldoesnotturnon, contactCanonCustomerCenter.
9
102
ThepowersuddenlygoesoffwhenaDC powersupplyisused.
SomeDCpowersupplyunitsturnoffthevoltagewhenathreshold valueisreached.Inthiscase,themessageindicatinglowvoltageisnot displayed.ConnectachargedDCpowersupplyorACpowersupply.
Theimagedoesnotdisplay. Seteachitemin"ChannelSettings"accordingtoinputsignal. 60
The3G-SDIRAWsignalimagedoesnot display.
Attimesthe3G-SDIRAWsignalimagemaynotdisplay,dependingon thetypeoftheCinemaEOScamera.RefertotheCanonwebsitefora listofsupportedproducts.
ThereisablankareawhensettoQuad Input/DualInput.
Theremaybenoinputsignal.Lookatthedisplayareaiconinthe interfaceareaandcheckthattheinputareaandsignalcablesare properlyconnected.
Signalswithdifferentresolutionorfrequencymaybeinputfromeach terminal.Checkthesignal.
15
101
Videopausedtemporarily Thescreenmaypausewhenrunning"Capture"viaawebbrowser. When"Capture"iscomplete,orturning"Web""Control"to"Off"will returntonormalscreen.
35
Screenistoobright/dark. Adjustthe"Contrast"ontheOSDmenu.
ThereisalimitontheservicelifeofLCDbacklight.Ifthescreen becomesdarkorstartsflickering,contactCanonCustomerCenter.
45
126 Troubleshooting
Symptom Cause and Action
Burn-inimageappears. ThisisacharacteristicoftheLCDpanelandyoushouldavoiddisplaying stationaryimageforalongtime.
Thereisanunlitorred,blue,green,or whitedotonscreen.
LCDdisplayismadeofveryhighprecisiontechnology.Ithaseffective pixelsof99.99%ormore,buttheremaybeblackdotsorred,blue,or greendotsthatmaybealwayson.Thisisnotafailure.
Thereisaninterferencepatternortrace thatremainswhentheLCDpanelis pressed.
Thesymptommayberesolvedbydisplayingawhiteorblackimageon theentirescreen.
OSDmenucannotbeused. Checkthat"ProtectSettings"isnotset. 96
"AspectMarker","SafetyZoneMarker"or "AreaMarker"doesnotappear.
Achannelwithnosignal,unsupportedsignal,orwith"Input Configuration"notsetmaybeselected.Checkthesignal.
101
Thefanstartstorotateevenwhen"Fan" under "CameraLink" is set to "On"or "FanStop"issetto"On".
Thefanstaysoffforapprox.1minutewhenanACpowersupplyisused. Tokeepthefanoffforalongerperiod,useaDCpowersupply.
When"Fan"under"CameraLink"issetto"On",thedowntimemaynot matchthecamera.
87
97
The fandoesnotstopevenwhen"Fan" under "CameraLink" is set to "On"or "FanStop"issetto"On".
Thefandoesnotstopiftheinternaltemperatureofthevideodisplayis high.Configuresettingsaftertheinternaltemperaturehaslowered.
Thefanmaynotstopinsomeconditions,forexamplewhenusedata hightemperature.Usethevideodisplayattheoperatingtemperature ( 102)orlower.
87
97
You forgot the password for "Protect Settings".
Pressthejogdialandthe buttonwhilethevideodisplayisinstandby. Theconfigurationwillberesettothestatewherenopasswordisset.
9
Thevideodisplaydoesnotstartupinthe condition that thepowerwas turnedoff lasttime.
Checkthe"PoweronSetting"ontheOSDmenu.Set"Lastmemory" tostartupthevideodisplayintheconditionthatthepoweristurnedoff lasttime.
98
The imagequality for theUsermode in "PictureMode"differs from the image qualityofpresets.
Selectthepresetmodeby"CopyPictureMode"andcopythesettings. 56
Imagequalityontheleftandrightscreens isdifferent.
Checkthe"ChannelSettings""PictureMode"settings. 22
62
Imagequalityisautomaticallychanged.
Thesameimageisdisplayedintwo screens.
Checkthe"ChannelSettings""SingleInputDualView"settings. 63
127Software Used in This Product
Software Used in This Product SoftwareinstalledwiththisproductincludessoftwaremodulesfromCanonorthirdparties.
Software Developed by Canon and Free Software
SoftwaredevelopedorcreatedbyCanonandaccompanyingdocumentisprotectedbycopyrightlaw,termsofan internationalconventionandanyothergoverninglaws. Thisproductusessoftwaremodulesundercopyrightbythirdpartiesanddistributedasfreesoftware.Someofthese softwaremodulesaresubjecttotheGNUGeneralPublicLicensev2(GPL),GNULesserGeneralPublicLicensev2.1 (LGPL)oranyotherlicense.
Free software modules installed with this product
linuxkernel busybox glibc JFFS2 SquashFS FUSE libfuse libupnp avahi-autoipd libxml zlib libpng Newlib(libc) Newlib(libm) wireless_tools wpa_supplicant openssl libnl RealTek_WiFi_linuxdriver dhcpd hostapd
Acquiring Source Code for Free Software
Somefreesoftwarerequirestheacquirementofthesourcecodeofmodulesinordertodistributetheexecutableform ofthosesoftwaremodules.Forinformationonhowtoacquirethesourcecodeforfreesoftwaresuchastheseand confirmingtermsoftheGPL,LGPLandotherlicenseagreements,pleasecheckwiththedistributorfromwhomthe productwaspurchased.
License Agreement for this Product
Obligation to Present License Agreement
Thecopyrightholdersofsoftwaremodulesinstalledwiththisproductrequireitslicenseagreementtobedisplayed. Thislicenseagreementisasfollows:
libupnp License
Copyright(c)2000-2003IntelCorporationAllrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:
* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.
* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
* NeithernameofIntelCorporationnorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts derivedfromthissoftwarewithoutspecificpriorwrittenpermission.
THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANYEXPRESS ORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLINTELORCONTRIBUTORS BELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES (INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE, DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY, WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGIN ANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
128 Software Used in This Product
libxml License
Copyright(C)1998-2003DanielVeillard.AllRightsReserved.
Permissionisherebygranted,freeofcharge,toanypersonobtainingacopyofthissoftwareandassociated documentationfiles(the"Software"),todealintheSoftwarewithoutrestriction,includingwithoutlimitationtherightsto use,copy,modify,merge,publish,distribute,sublicense,and/orsellcopiesoftheSoftware,andtopermitpersonsto whomtheSoftwareisfurnishedtodoso,subjecttothefollowingconditions:
Theabovecopyrightnoticeandthispermissionnoticeshallbeincludedinallcopiesorsubstantialportionsofthe Software.
THESOFTWAREISPROVIDED"ASIS",WITHOUTWARRANTYOFANYKIND,EXPRESSORIMPLIED,INCLUDING BUTNOTLIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEAND NONINFRINGEMENT.INNOEVENTSHALLTHEDANIELVEILLARDBELIABLEFORANYCLAIM,DAMAGESOR OTHERLIABILITY,WHETHERINANACTIONOFCONTRACT,TORTOROTHERWISE,ARISINGFROM,OUTOFOR INCONNECTIONWITHTHESOFTWAREORTHEUSEOROTHERDEALINGSINTHESOFTWARE.
Exceptascontainedinthisnotice,thenameofDanielVeillardshallnotbeusedinadvertisingorotherwisetopromote thesale,useorotherdealingsinthisSoftwarewithoutpriorwrittenauthorizationfromhim.
Newlib(libc) License
Copyright(c)1990TheRegentsoftheUniversityofCalifornia.Allrightsreserved.
Redistributionanduseinsourceandbinaryformsarepermittedprovidedthattheabovecopyrightnoticeandthis paragraphareduplicatedinallsuchformsandthatanydocumentation,andothermaterialsrelatedtosuchdistribution anduseacknowledgethatthesoftwarewasdevelopedbytheUniversityofCalifornia,Berkeley.Thenameofthe Universitymaynotbeusedtoendorseorpromoteproductsderivedfromthissoftwarewithoutspecificpriorwritten permission.
THISSOFTWAREISPROVIDED"ASIS"ANDWITHOUTANYEXPRESSORIMPLIEDWARRANTIES,INCLUDING, WITHOUTLIMITATION,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULAR PURPOSE.
Copyright(c)1991,2000TheRegentsoftheUniversityofCalifornia.Allrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement: ThisproductincludessoftwaredevelopedbytheUniversityofCalifornia,Berkeleyanditscontributors. 4.NeitherthenameoftheUniversitynorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts derivedfromthissoftwarewithoutspecificpriorwrittenpermission.
THISSOFTWAREISPROVIDEDBYTHEREGENTSANDCONTRIBUTORS"ASIS"ANDANYEXPRESSOR IMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEREGENTS ORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE POSSIBILITYOFSUCHDAMAGE.
129Software Used in This Product
Newlib(libm) License
Copyright(C)1993bySunMicrosystems,Inc.Allrightsreserved.
DevelopedatSunPro,aSunMicrosystems,Inc.business. Permissiontouse,copy,modify,anddistributethissoftwareisfreelygranted,providedthatthisnoticeispreserved.
openssl
Copyright(C)1998-2017TheOpenSSLProject.Allrightsreserved.
Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgment: "ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit.(http://
www.openssl.org/)" 4.Thenames"OpenSSLToolkit"and"OpenSSLProject"mustnotbeusedtoendorseorpromoteproductsderived fromthissoftwarewithoutpriorwrittenpermission.Forwrittenpermission,pleasecontactopenssl-core@openssl. org.
5.Productsderivedfromthissoftwaremaynotbecalled"OpenSSL"normay"OpenSSL"appearintheirnames withoutpriorwrittenpermissionoftheOpenSSLProject.
6.Redistributionsofanyformwhatsoevermustretainthefollowingacknowledgment: "ThisproductincludessoftwaredevelopedbytheOpenSSLProjectforuseintheOpenSSLToolkit(http://www.
openssl.org/)"
THISSOFTWAREISPROVIDEDBYTHEOpenSSLPROJECT"ASIS"ANDANYEXPRESSEDORIMPLIED WARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYAND FITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEOpenSSLPROJECT ORITSCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR CONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSOR SERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDON ANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCE OROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHE POSSIBILITYOFSUCHDAMAGE.
Copyright(C)1995-1998EricYoung(eay@cryptsoft.com) Allrightsreserved.
ThispackageisanSSLimplementationwrittenbyEricYoung(eay@cryptsoft.com). TheimplementationwaswrittensoastoconformwithNetscapesSSL.
Thislibraryisfreeforcommercialandnon-commercialuseaslongasthefollowingconditionsareahearedto.The followingconditionsapplytoallcodefoundinthisdistribution,beittheRC4,RSA,lhash,DES,etc.,code;notjustthe SSLcode.TheSSLdocumentationincludedwiththisdistributioniscoveredbythesamecopyrighttermsexceptthat theholderisTimHudson(tjh@cryptsoft.com).
CopyrightremainsEricYoung's,andassuchanyCopyrightnoticesinthecodearenottoberemoved.Ifthispackage isusedinaproduct,EricYoungshouldbegivenattributionastheauthorofthepartsofthelibraryused.Thiscanbe intheformofatextualmessageatprogramstartuporindocumentation(onlineortextual)providedwiththepackage.
130 Software Used in This Product
Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet: 1.Redistributionsofsourcecodemustretainthecopyrightnotice,thislistofconditionsandthefollowingdisclaimer. 2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Alladvertisingmaterialsmentioningfeaturesoruseofthissoftwaremustdisplaythefollowingacknowledgement: "ThisproductincludescryptographicsoftwarewrittenbyEricYoung(eay@cryptsoft.com)"
Theword'cryptographic'canbeleftoutiftherouinesfromthelibrarybeingusedarenotcryptographicrelated:-). 4.IfyouincludeanyWindowsspecificcode(oraderivativethereof)fromtheappsdirectory(applicationcode)you mustincludeanacknowledgement:
"ThisproductincludessoftwarewrittenbyTimHudson(tjh@cryptsoft.com)"
THISSOFTWAREISPROVIDEDBYERICYOUNG"ASIS"ANDANYEXPRESSORIMPLIEDWARRANTIES, INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITYANDFITNESSFORA PARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHEAUTHORORCONTRIBUTORSBELIABLE FORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING, BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,OR PROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERIN CONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUT OFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
Thelicenceanddistributiontermsforanypublicallyavailableversionorderivativeofthiscodecannotbechanged.i.e. thiscodecannotsimplybecopiedandputunderanotherdistributionlicence[includingtheGNUPublicLicence.]
wpa_supplicant, hostapd
Copyright(C)2002-2016,JouniMalinen
Thissoftwaremaybedistributed,used,andmodifiedunderthetermsofBSDlicense:
Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:
1.Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.
2.Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.
3.Neitherthename(s)oftheabove-listedcopyrightholder(s)northenamesofitscontributorsmaybeusedtoendorse orpromoteproductsderivedfromthissoftwarewithoutspecificpriorwrittenpermission.
THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANY EXPRESSORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALL THECOPYRIGHTOWNERORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL, EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOF SUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION) HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT (INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVEN IFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.
Copyright(c)2004-2014byInternetSystemsConsortium,Inc.("ISC") Copyright(c)1995-2003byInternetSoftwareConsortium
Permissiontouse,copy,modify,anddistributethissoftwareforany purposewithorwithoutfeeisherebygranted,providedthattheabove
131Software Used in This Product
copyrightnoticeandthispermissionnoticeappearinallcopies.
THESOFTWAREISPROVIDED"ASIS"ANDISCDISCLAIMSALLWARRANTIES WITHREGARDTOTHISSOFTWAREINCLUDINGALLIMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESS.INNOEVENTSHALLISCBELIABLEFOR ANYSPECIAL,DIRECT,INDIRECT,ORCONSEQUENTIALDAMAGESORANYDAMAGES WHATSOEVERRESULTINGFROMLOSSOFUSE,DATAORPROFITS,WHETHERINAN ACTIONOFCONTRACT,NEGLIGENCEOROTHERTORTIOUSACTION,ARISINGOUT OFORINCONNECTIONWITHTHEUSEORPERFORMANCEOFTHISSOFTWARE.
InternetSystemsConsortium,Inc. 950CharterStreet RedwoodCity,CA94063
132 Index
Index Number
2SampleInterleave................................................... 60
3G-SDIRAW............................................................. 60
200%(ScreenScaling).............................................. 66
2020ConstantLuminance........................................ 54
2020GamutMapping............................................... 54
2020OutsideofGamutView..................................... 91
A
ACESproxy................................................................ 45
Adjustment................................................................ 45
AdobeRGB............................................................... 45
Anamorphic......................................................... 66,87
AnchorAdjustment.............................................. 21,56
AreaMarker............................................................... 74
AreaMarker(CameraLink)........................................ 87
AspectMarker........................................................... 71
AudioInput................................................................ 61
AudioLevelMeter...................................................... 77
AudioSettings........................................................... 70
AutomaticAdjustment(ARRI)..................................... 86
AutomaticAdjustment(CINEMAEOS)....................... 85
AutomaticAdjustment(VARICAM)............................. 87
B
BackgroundColor..................................................... 69
BacklightControl....................................................... 46
BacklightScan.......................................................... 91
Banner...................................................................... 96
BiasR/G/B................................................................ 46
Bicubic...................................................................... 67
Black(TestPattern).................................................... 83
BlueOff..................................................................... 91
BlueOnly................................................................... 91
BoostContrast.......................................................... 53
Brightness................................................................. 45
ButtonNameLightingTime....................................... 96
C
Calibration........................................................... 23,55
CameraInformation................................................... 87
CameraLink.............................................................. 85
CanonLog,CanonLog2,CanonLog3..................... 47
CDLExport/CDLImport............................................ 27
CDL/UserLUT........................................................... 52
CDL/UserLUTBypass.............................................. 52
CenterMarker........................................................... 75
ChannelName........................................................... 61
ChannelSettings....................................................... 60
Chroma..................................................................... 45
CINEMAEOSSYSTEM(PictureMode)...................... 45
CinemaGamutto709............................................... 47
CinemaGamutto2020............................................. 47
CinemaGamuttoDCI............................................... 47
ColorBars(TestPattern)............................................ 83
ColorGamut.............................................................. 47
ColorRange........................................................ 51,97
ColorTemperature..................................................... 46
CompareView........................................................... 92
CompatibleSettings.................................................. 97
Contrast.................................................................... 45
CopyPictureMode.................................................... 56
Custom(xy)(ColorTemperature)................................ 46
D
Date/Time........................................................... 27,95
DCI-P3...................................................................... 45
DCI-P3+to709......................................................... 47
DCI-P3+toDCI......................................................... 47
DetailSettings
Adjustment............................................................ 53
CDL/UserLUT....................................................... 52
DisplayButtonLED................................................... 96
DisplayChannel......................................................... 95
DisplayFunction/DisplayFunction(CDL).................... 95
DisplayName............................................................ 96
DisplaySettingLink................................................... 94
DisplaySettings......................................................... 66
DualInput.................................................................. 60
DualLink3G-SDI....................................................... 60
E
EBU........................................................................... 45
Export/Import...................................................... 26,98
F
FalseColor................................................................ 89
Fan(CameraLink)..................................................... 87
FanSettings.............................................................. 97
FilmCadence............................................................ 69
Firmware/LicenseUpdate.......................................... 97
Firmware/LicenseVer............................................... 101
133Index
Format....................................................................... 61
FrameHold............................................................... 69
FrameLuminanceMonitor......................................... 81
FunctionButtonGuide............................................... 96
Function/ChannelButton........................................... 95
FunctionSettings....................................................... 76
G
GainR/G/B................................................................ 46
Gamma/EOTF........................................................... 47
GammaLUT.............................................................. 47
GamutLUT................................................................ 47
GlobalDimming......................................................... 46
Gray(TestPattern)..................................................... 83
GreenOff................................................................... 91
GridMarker............................................................... 75
H
HDMI............................................................. 10,16,97
HDMILink................................................................. 56
HDRRange............................................................... 49
HDR/SDRView......................................................... 54
HideOSD.................................................................. 95
Histogram.................................................................. 79
HybridLog-Gamma................................................... 47
HybridLog-GammaSystem...................................... 54
I
ImageDivision........................................................... 60
ImagePriority............................................................ 69
InputConfiguration.................................................... 60
InputTransform......................................................... 50
InternalSync............................................................. 61
I/PConversion........................................................... 69
I/PsF.......................................................................... 69
ITU-RBT.709............................................................. 45
ITU-RBT.1886........................................................... 47
ITU-RBT.2020........................................................... 45
L
LAN........................................................................... 10
Language.................................................................. 95
LAN(Network/IMDSettings)...................................... 93
LinkOrder................................................................. 60
LocalDimming.......................................................... 46
LTC........................................................................... 76
LUTImport.......................................................... 25,53
M
MACAddress.......................................................... 101
MarkerPreset............................................................ 71
MarkerSettings......................................................... 71
Marker/TC/CameraInfoInput..................................... 61
Monochrome............................................................. 91
MultiView(Dual)........................................................ 60
MultiView(Quad)....................................................... 60
N
NativeInputResolution(ScreenScaling).................... 66
NearestNeighbor...................................................... 67
Network/IMDSettings............................................... 93
O
Offset........................................................................ 52
OSDMenu.......................................................... 18,38
OSDPosition............................................................. 96
OSDSettings............................................................. 96
OSDSize................................................................... 96
OutputTransform...................................................... 50
OutputTransformSurround....................................... 50
OverRange............................................................... 90
P
Password............................................................ 93,96
Peaking..................................................................... 89
PictureFunctionSettings........................................... 89
PictureMode....................................................... 45,62
PixelValueCheck...................................................... 83
PLUGE(TestPattern)................................................. 83
Power........................................................................ 52
PowerIndicatorBrightness........................................ 96
PowerIndicator/ButtonLEDSettings......................... 96
PoweronSetting....................................................... 98
ProtectSettings......................................................... 96
PsF............................................................................ 69
Q
QuadInput................................................................ 60
R
Ramp(TestPattern)................................................... 83
RedOff...................................................................... 91
Reset......................................................................... 56
ResetAllSettings...................................................... 98
S
SafetyZoneMarker1,2............................................ 72
134 Index
Saturation.................................................................. 52
ScalingMethod......................................................... 67
ScreenCapture......................................................... 84
ScreenScaling.......................................................... 66
SDI...................................................................... 10,15
SelectChannel.......................................................... 60
SelectInputSignal..................................................... 60
Separator.................................................................. 63
SerialNo.................................................................. 101
ShapeTrace.............................................................. 67
Sharpness................................................................. 45
SignalInformation.................................................... 101
SignalMonitoring....................................................... 84
SingleInput............................................................... 60
SingleInputDualView............................................... 63
Slope......................................................................... 52
SMPTE-C.................................................................. 45
SpeedPriority............................................................ 69
SquareDivision.......................................................... 60
SubnetMask............................................................. 93
SystemInformation.................................................. 101
SystemSettings........................................................ 95
T
TestPattern............................................................... 83
TimeCode................................................................ 76
U
UsageTime............................................................. 101
USB............................................................................ 9
User1-7.................................................................... 45
UserLUT................................................................... 52
V
VectorScope............................................................. 79
VideoPosition(MultiView)......................................... 67
VITC.......................................................................... 76
W
WaveFormMonitor................................................... 77
Web.................................................................... 35,93
White(TestPattern)................................................... 83
Wi-Fi.................................................................... 33,93
Y
YCbCrColorMatrix................................................... 53
Z
Zoom........................................................................ 68
135
USA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN THE UNITED STATES
ThelimitedwarrantysetforthbelowisgivenbyCanonU.S.A.,Inc.('CanonUSA')withrespecttoCanonProfessional DisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipmentsoriginalcontainer,when purchasedintheUnitedStates.ThislimitedwarrantyisonlyeffectiveuponpresentationofyourBillofSaleorother proofofpurchase. CanonUSAwarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer,that theEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiodof ONE-YEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthiswarranty,youmustpre-pay theshippingcharges,andyoumustencloseacopyoftheBillofSaleorotherproofofpurchasewithacomplete explanationoftheproblem.EquipmentreturnedtoaCanonUSAfactoryservicefacility,andproventobedefective uponinspection,willbe,withoutcharge,: (a)repairedutilizingneworcomparablerefurbishedparts,or (b)exchangedforrefurbishedornewEquipment asdeterminedintheCanonUSAsrepairfacilityssolediscretion.TherepairedorexchangedEquipmentwillbeshipped backfreeofcharge.WarrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodoftheEquipment. Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunitytoapproveor rejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprove,repairswillbemadeandtheEquipment willbereturnedatyourriskandexpense.Ifyoureject,theEquipmentwillbereturnedtoyouatnochargetoyoutoan addresswithintheUnitedStates.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non- Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non- Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedthe EquipmentorcontacttheCANONINFORMATIONCENTERAT855-4K-CANON(855-452-2666)orontheinternetat pro.usa.canon.com/support.YouwillbedirectedtothenearestservicefacilityforyourEquipment.
Technicalsupportprogramspecificssubjecttochangewithoutnotice.
ThisLimitedWarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthe followingcases:
A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonUSAsusersmanual; B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage; C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonUSA)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems; D. IfdefectsordamagesarecausedbyserviceotherthanCanonUSA'sfactoryservicecentersorauthorized servicefacilities; E. Anyinternalmodificationtoproducthardwareorfirmware; F. AnymaintenanceoftheEquipment,includinganyfeesforsuchMaintenance; G. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.
136
ThisLimitedWarrantydoesnotapplytoEquipmentpurchasedoutsidetheUnitedStates.ThisLimitedWarrantydoes notapplytoaccessoriesorconsumablesfortheEquipment,whicharesoldASIS,withoutwarrantyofanykindby CanonUSA.PleaseretainthiswarrantycardandyourBillofSaleasapermanentrecordofyourpurchase.Thiscard ensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modificationorproductrecallunder applicablelawsorregulations.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection, modificationorproductrecallunderapplicablelawsorregulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENTS HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU). THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.
CANON U.S.A., INC
137
CANADA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN CANADA
ThelimitedwarrantysetforthbelowisgivenbyCanonCanadaInc.('CanonCanada')withrespecttoCanon ProfessionalDisplayEquipment(the'Equipment')accompanyingthislimitedwarrantyintheEquipmentsoriginal container,whenpurchasedinCanada.Thislimitedwarrantyisonlyeffectiveuponpresentationofyourbillofsaleor otherproofofpurchase. CanonCanadawarrantstotheoriginalend-userpurchaser,whendeliveredinnewconditioninitsoriginalcontainer, thattheEquipmentwillbefreefromdefectsinmaterialsandworkmanshipundernormaluseandserviceforaperiod ofONEYEARfromthedateoforiginalpurchase.WhenreturningEquipmentunderthislimitedwarranty,youmustpre- paytheshippingcharges,andyoumustencloseacopyofthebillofsaleorotherproofofpurchasewithacomplete explanationoftheproblem.EquipmentreturnedtoaCanonCanadafactoryservicefacilityandproventobedefective uponinspectionwillbe,withoutcharge: (a)repairedutilizingneworcomparablerefurbishedparts,or (b)exchangedforrefurbishedornewEquipment, asdeterminedbytheCanonCanadafactoryservicecenter,initssolediscretion.TherepairedorexchangedEquipment willbeshippedbackfreeofcharge.Warrantyexchangeorreplacementdoesnotextendtheoriginalwarrantyperiodof theEquipment.Forrepairsafterthewarrantyperiodhasexpired,anestimateofthecostofrepairandanopportunity toapproveorrejecttherepairexpensebeforeitisincurredwillbeprovided.Ifyouapprovetheproposedrepairs, repairswillbemadeandtheEquipmentwillbereturnedatyourriskandexpense.Ifyourejecttheproposedrepairs, theEquipmentwillbereturnedtoyouatnochargetoyoutoanaddresswithinCanada.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon Canada will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible computer equipment, peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty or condition of any kind by Canon Canada, including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
Inordertoobtainwarrantyservice,pleasecontacttheauthorizedCanonretaildealerfromwhomyoupurchasedthe EquipmentorcontacttheCANONINFORMATIONCENTERat800-667-2666orontheinternetatwww.canon.ca/ pro.
Technicalsupportprogramspecificsaresubjecttochangewithoutnotice.
ThislimitedwarrantycoversalldefectsencounteredinnormaluseoftheEquipmentanddoesnotapplyinthefollowing cases: A. LossordamagetotheEquipmentduetoabuse,neglect,mishandling,electriccurrentfluctuation,accident, impropermaintenance,useofnon-Canonaccessoriesorfailuretofollowoperating,maintenanceor environmentalinstructionsprescribedinCanonCanadasusersmanual; B. IftheEquipmentisdefectiveasaresultofsand,dirtorwaterdamage; C. Ifdefectsordamagesarecausedbytheuseofpartsorsupplies(otherthanthosesoldbyCanonCanada)that causedamagetotheEquipmentorthatcauseabnormallyfrequentservicecallsorserviceproblems D. IfdefectsordamagesarecausedbyserviceotherthanCanonCanada'sfactoryservicecentersorauthorized servicefacilities; E. Anyinternalmodificationtoproducthardwareorfirmware; F. AnymaintenanceoftheEquipment,includinganyfeesforsuchmaintenance;or G. IftheEquipmenthashaditsserialnumberordatingalteredorremoved.
138
ThislimitedwarrantydoesnotapplytoEquipmentpurchasedoutsideCanada.Thislimitedwarrantydoesnotapplyto accessoriesorconsumablesfortheEquipment,whicharesoldASIS,withoutwarrantyorconditionofanykindby CanonCanada.Pleaseretainthiswarrantycardandyourbillofsaleorotherproofofpurchaseasapermanentrecord ofyourpurchase.Thiscardensuresthatyouarecontactedpromptlyshouldtherebeasafetyinspection,modification orproductrecallunderapplicablelawsorregulations.
NO IMPLIED WARRANTY OR CONDITION, INCLUDING IN RESPECT OF THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THIS EQUIPMENT AFTER THE EXPIRATION OF THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTEE UNDER THIS LIMITED WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENTS HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
Thislimitedwarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromprovinceto province.
CANON CANADA INC.
Visit your local Canon Web site to download the latest version of this instruction manual.
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
AUSTRALIA www.canon.com.au Canon Australia Pty Ltd
13-13-83 (within Australia only) (61) 02-9805-2000
CANADA CANON CANADA INC. http://www.canon.ca Professional Product Support / Soutien des
produits professionnels (800) 667-2666
CENTRO Y SURAMRICA CANON U.S.A. - Latin America Group
http://www.cla.canon.com
EUROPE www.canon-europa.com Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
MXICO CANON MEXICANA, S DE RL DE CV http://www.canon.com.mx 52 (55) 5249-4905
NEW ZEALAND www.canon.co.nz Canon New Zealand Ltd
0800-222-666 (within New Zealand only) (64) 09-489-0300
UNITED KINGDOM www.canon.co.uk Canon UK Ltd CCI Service Centre, Unit 130, Centennial Park, Borehamwood, Hertfordshire, WD6 3SE
0844-369-0100
USA CANON U.S.A., INC. http://pro.usa.canon.com http://pro.usa.canon.com/support
(855) 4K-CANON (855-452-2666) (USA only)
http://www.canon-ci.co.kr 607, 5 +82(0)2-1588-8133
Canon Korea Consumer Imaging Inc. http://www.canon-ci.co.kr 5F, Canon Bldg, 607, Teheran-ro, Gangnam-gu, Seoul, Korea
+82(0)2-1588-8133
Visit your local Canon Web site to download the latest version of this instruction manual.
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
AUSTRALIA www.canon.com.au Canon Australia Pty Ltd
13-13-83 (within Australia only) (61) 02-9805-2000
CANADA CANON CANADA INC. http://www.canon.ca Professional Product Support / Soutien des
produits professionnels (800) 667-2666
CENTRO Y SURAMRICA CANON U.S.A. - Latin America Group
http://www.cla.canon.com
EUROPE www.canon-europa.com Canon Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
MXICO CANON MEXICANA, S DE RL DE CV http://www.canon.com.mx 52 (55) 5249-4905
NEW ZEALAND www.canon.co.nz Canon New Zealand Ltd
0800-222-666 (within New Zealand only) (64) 09-489-0300
UNITED KINGDOM www.canon.co.uk Canon UK Ltd CCI Service Centre, Unit 130, Centennial Park, Borehamwood, Hertfordshire, WD6 3SE
0844-369-0100
USA CANON U.S.A., INC. http://pro.usa.canon.com http://pro.usa.canon.com/support
(855) 4K-CANON (855-452-2666) (USA only)
http://www.canon-ci.co.kr 607, 5 +82(0)2-1588-8133
Canon Korea Consumer Imaging Inc. http://www.canon-ci.co.kr 5F, Canon Bldg, 607, Teheran-ro, Gangnam-gu, Seoul, Ko
Related manuals for Canon DP-V2410 v2 Instruction Manual
Manualsnet FAQs
If you want to find out how the DP-V2410 Canon works, you can view and download the Canon DP-V2410 v2 Instruction Manual on the Manualsnet website.
Yes, we have the Instruction Manual for Canon DP-V2410 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Instruction Manual should include all the details that are needed to use a Canon DP-V2410. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Canon DP-V2410 v2 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Canon DP-V2410 v2 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Canon DP-V2410 v2 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Canon DP-V2410 v2 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon DP-V2410 v2 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.