Contents

Canon DP-V1830 Instruction Manual PDF

1 of 98
1 of 98

Summary of Content for Canon DP-V1830 Instruction Manual PDF

Beforeuse,besuretoreadthisguide,includingthesafetyandhandlingprecautions.

Readingthisguidewillhelpyoulearntousethevideodisplayproperly.

Storethisguidesafelysothatyoucanuseitinthefuture. English

Instruction Manual

Operation Guide

Video Display

Firmware ver. 1.0

2

Table of Content

Introduction 3 Aboutthismanual 3 Trademarks 3

Operating the Video Display 4 BasicoperationstousetheOSDmenu 4 AdjustingImageQualityWhileViewingthe EntireImage 5

TemporarilySavingParameters(AnchorPoint Setting) 7

Enlargingthedisplay(Zoomfunction) 7 ChangingImageQualityAutomatically AccordingtoInputSignal 8

Changingthescreendisplayarea 8 Export/Import 9 SetDate/Time 11 InputtingCharacters 12 UsingtheFunction(F)Buttons 13 UsingtheChannel(CH)Button 14 CheckingSignalInformationandStatusofthe MainUnit 17

Operatingthevideodisplayusinganexternal device[GPIterminal] 17

Operatingthevideodisplayusinganexternal device[LANterminal] 18

OSD Menu 19 Adjustment 19 ChannelSettings 34 DisplaySettings 37 AudioSettings 39 MarkerSettings 40 FunctionSettings 47 PictureFunctionSettings 56 Network/IMDSettings 60 SystemSettings 61 SignalInformation 68 SystemInformation 68

Supported Signal Format 69

Image/Frame Display 83

Error Messages 86

Troubleshooting 89

Software Used in This Product 91

Index 95

About the User Manual for the Display

TheproductincludesanInstructionManualorSetupGuide.Beforeusingtheproduct,besuretoread ImportantUsageInstructionsandSafetyInstructionsandHandlingPrecautions.

TheOperationGuide(thisdocument)explainsthefunctionsavailableontheversionofthefirmwareshownon thecoverpageaswellassetupprocedures.

3

Introduction

TheOnScreenDisplay(thereafterreferredtoOSD)defaultlanguagesettingisEnglish.TochangetheOSDmenu languagesetting,pleaserefertop.61.

About this manual ThescreenoftheDP-V1830isusedasanexampleinthisGuide.SomeoftheillustrationusedintheGuidehavebeen simplifiedforclarity.

Conventions used in this manual

:Indicatesareferencepage. Reference:Indicatesreferenceinformation. CAUTION:Indicatesanitemyoumustobserve. Note:Indicatesanote.

[Adjustment] [PictureMode]: PressingtheMENUbuttonshowstheOSDMenulevels.Youcanmovebetweentheitemsandselectfromthem.

Trademarks HDMI,HDMIlogo,andHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI LicensingAdministrator,Inc.intheU.S.andothercountries.

VESAisaregisteredtrademarkortrademarkofVideoElectronicsStandardsAssociationintheU.S.andother countries.

Otherproductandcompanynameshereinaretrademarksorregisteredtrademarksoftheirrespectiveowners.

4

OperatingtheVideoDisplay

Usingbuttonsandjogdialonthevideodisplay,youcanadjustimagequalityandconfiguresettingsforinputsignals.In addition,youcanassignfrequentlyusedfunctionstotheCH(Channel)andF(Function)buttons.

Basic operations to use the OSD menu ThevideodisplaysettingsarechangedfromtheOSDmenu.

MENU button Opens/closestheOSD menu,ormovesupone levelinamenu.

RESET button Resetstheitemstobeadjustedusingthesliderand enteredcharacters.

Jog dial

orrotation:Usedtomovetoadifferentitemandchange settings.

Press: Confirmssettingsormovestheselection frameup/down1level.

1 Open the OSD menu. PresstheMENUbutton.

2 Select the Main Menu. SelecttheMainMenuitemusingthejogdialandpressitto determinetheselection.

3 Select the Sub Menu. SelecttheSubMenuitemusingthejogdialandpressitto determinetheselection.

MainMenu SubMenu SettingOptions

Operating the Video Display

5

4 Select the setting to change. Selectthesettingtochangeusingthejogdialandpressitto determinetheselection.YouwillbereturnedtotheSubMenu itemselectionscreen.

5 Exit menu. PressingtheMENUbuttonwillreturnyoutotheMainMenu itemselectionscreen.PressingtheMENUbuttonagainwill closethemenuscreen.

Note Toadjustimagequality,warming-upisnecessarytostabilizethebrightnessofthevideodisplay.Waitatleast10minutesafter turningonthepowerbeforeuse.

TheOSDmenuandsliderwilldisappearautomaticallyifnooperationisperformedforapproximately1minute.Thefunction buttonguigewilldisappearautomaticallyifnooperationisperformedforapproximately10seconds.

Thesettingsthatcannotbeset,aregrayedout.

Thefollowingfunctionscanbereturnedtotheirfactorydefaultsettingsortheiranchorpoint( 7)bypressingtheRESETbutton, afteradjustingtheimagequality. - [Luminance],[Brightness],[Chroma],[HDRRange],[Power],[Saturation],[Offset],[Slope]

When[PictureMode] [User19]:Whenexecutingcalibration,pressingtheRESETbuttonwhileadjustingtheimagequalitywill returnyoutothesettingsaftercalibration.

Adjusting Image Quality While Viewing the Entire Image YoucanadjusttheOSDmenutodisplayasaslideratthebottomofthescreen.Thisallowsfortheimagequalitytobe adjustedwhilstitisdisplayedonthescreen.

1 Press the jog dial when the selection frame is on setting options. Asliderappearsatthebottomofthescreen.

2 Make adjustments using the jog dial with using the slider as guide.

3 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Operating the Video Display

6

Color temperature detailed settings (gain, bias) YoucanadjustRGBallatonceorindividuallywhenthescreensforadjusting[Gain]or[Bias]aredisplayed.

1 Select [Adjustment] [Color Temperature]. [GainR],[GainG],[GainB],[BiasR],[BiasG],and[BiasB]canbesetindividuallyusingthejogdial( ).

2 Select one. Thesettingscreenfor[Gain]or[Bias]willbedisplayed.

3 Switch the guide in the upper right area of the slider screen using the jog dial ( ). Theindicationchangesto[RGB],[R],[G],and[B].Selecting[RGB]willallowyoutoadjustRGBasawhole.

4 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Color temperature detailed settings (xy values)

1 Select [Adjustment] [Color Temperature].

2 Select [Custom (xy)]. Youcanset[x]and[y]individuallyusingthejogdial( ).

3 Select either [x] or [y]. Thecolormapisdisplayed.

4 Adjust [x] with the and [y] with . Theadjustedvalueisindicatedbythe" "markonthecolormap.

5 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Defaultvalue

Lastusedvalue

Currentvalue

Currentvalue

Operating the Video Display

7

Temporarily Saving Parameters (Anchor Point Setting) Youcantemporarilysaveparametersfor[Luminance],[Brightness],[Chroma],and[HDRRange].See 25forsetting anchorpointsduringCDLadjustment.

1 Select [Adjustment] [Anchor Adjustment].

2 Press the jog dial, and when the confirmation screen appears, select [OK]. Theparameterissavedandtheanchorpointisset.

3 Adjust the image quality again and press the RESET button on the video display. Returnsyoutotheanchorpointforeachfunction.

CurrentvalueLastusedvalue

Anchorpoint

Note Executing[Adjustment] [Reset]or[SystemSettings] [ResetAllSettings]resetssavedanchorpointsandthesettingsreturn totheirfactorydefaultvalues.

Enlarging the display (Zoom function) ( 38) Thezoomdisplaypositioncanbeadjusted,andthezoommagnification(2x,4x,8x)canbeselected.

1 Select [Display Settings] [Zoom].

2 Select [Zoom Preset]. Selectapresetzoomdisplay.

3 Select [Position]. Thezoomadjustmentscreenisdisplayed. - Tomovethedisplayposition:Movethejogdial( orrotation).

- Toreturntothecenter:PresstheRESETbutton.

4 When adjustments are completed, press the jog dial. ThescreenreturnstotheoriginalOSDmenu.

Note WhenmagnifyingtheimageandtheOSDmenuisnotbeingdisplayed, - youcansetthemagnificationratiobypressingthejogdial.

- Youcanmovethedisplaylocationbymovingthejogdial( orrotation).

- YoucansetthefollowingfunctionsusingtheCHbutton: CH1:Selectzoommagnification;CH2:Switchbetweenzoompresets(Zoom1/Zoom2/Zoom3);CH3:Zoomoff

Zoom 2 [x4]

Operating the Video Display

8

Changing Image Quality Automatically According to Input Signal Onthisvideodisplay,youcanautomaticallychangetheimagequalityaccordingtovideoresolutionormetadata.

Changing [Picture Mode] automatically ( 36)

1 Select [Channel Settings] [Select Channel]. Selectthechannel.

2 Select [Channel Settings] [Picture Mode] [Type].

3 Select the Type using the jog dial. Changing by individual video resolution (4K/2K) Select[4K/2K].

Changing according to video resolution (4K/2K) or metadata (SDI) Select[Automatic].

4 Select the Picture Mode.

Changing the image quality setting according to video metadata (HDMI) ( 28)

1 Select [Adjustment] [Picture Mode] [User 1] - [User 9].

2 Select [Adjustment] [Detail Settings] [HDMI Link] [Automatic Adjustment]. Select[On]. See[HDMILink]( 28)fortheconfigurablesettings.

Note Whenautomaticchangingofimagequalityaccordingtovideoresolution(4K/2K)orSDImetadataisset, informationshowingwhichresolution(4K/2K,etc.)isselectedwillbedisplayedatthetoprightofthe menuscreen.

Changing the screen display area When4096x2160videosignalisinput,theleftandrightsidesoftheimagewillbecroppedtodisplayanareaof 3840x2160.Thecroppedsidescanthenbefurtheradjustedontheleftandright.

1 Select [Display Settings] [Screen Scaling]. Select[NativeInputResolution]or[200%].

2 Press the jog dial ( ) while the OSD menu is closed. Shiftstotheleftorright.

Operating the Video Display

9

Export/Import Youcanexport/importLUTandCDLparametersaswellasOSDmenusettings.

LUT Import ( 26)

1 Insert the USB memory stick containing the LUT file into the USB port of the video display.

2 Select [Adjustment] [Detail Settings] [LUT Import].

3 Select the LUT file to import. Inthe[Filename]field,searchanddisplayafilewithextension".clut"and".cube"intherootfolder.

4 Select the LUT type. Refertothe"ConceptDrawingofDisplayImageProcessingandLUT"( 10).

5 Select the LUT No. to save the LUT.

6 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Importstarts.

Note Importof[3D-LUT]canalsobesetfrom[Adjustment] [CDL/UserLUT] [3D-LUT] [LUTImport].

TheLUTfile(.clutformat)isproprietarytoCanonVideoDisplay.RefertotheCanonwebsiteforthefileformatandhowtocreate theLUTfile.

Upto1000LUTimportfilesarerecognized.

YoucandeletetheimportedLUT,aswellasrenametheLUT( 26).

TheconfigurationofLUTfiles(cubeformat)isshownbelow.

LUT filename

Type of characters that can be used One-bytealphabeticalcharactersandnumbersonly

No. of characters that can be used Upto64characters(includingtheextension)

Extension .cube

LUT file format

TITLE ASCII24characterscanbeused. *DisplayedintheOSDmenuofthedisplayasaselectionitem.(Upto24characters)

LUT_3D_SIZE Specifyonefrom9/17/33/65.

Table Data SpecifyRed,GreenandBlue.

LUT_1D_SIZE DOMAIN_MIN DOMAIN_MAX LUT_1D_INPUT_RANGE LUT_3D_INPUT_RANGE

Unsupported.

Forthelinefeedcode,useCR(carriagereturn),LF(linefeed),orCR+LF.

Forthecharactercode,useShift-JIS,EUC-JP,orUTF-8(with/withoutBOM).

Filesinwhichboth1D-LUTand3D-LUTarewrittenarenotsupported.

Operating the Video Display

10

Concept Drawing of Display Image Processing and LUT

Color Gamut/Gamma/ HDR Range, etc.Range

conversion Range

conversion 3D-LUT

Import

LUT Preset

Export/Import OSD Menu Settings ( 64)

1 Select [System Settings] [Export/Import].

2 Select [Export] or [Import].

Exporting 1Select[Target]from[USB]or[User1]to[User3]. Export[USB]totheUSBmemoryand[User1]to[User3]tothebuilt-inmemoryofthemainunit. 2Ifyouselected[USB],select[Filename]. Thefactorydefaultis[dinfo_dpv****.dat](****:Numberoftheproductname).Youcanchangethenameof thefiletobeexportedtotheUSBmemorywithin16one-bytecharactersincludingalphabeticalcharacters, numbers,andsymbols.

Importing 1Select[Target]from[USB]or[User1]to[User3]. Specifythedestinationtosavethefiletobeimported. 2Select[Filename]when[USB]isselected. 3In[Settings],select[All]orMainMenuname.

3 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Export/Importstarts.

Note Afterexportto[User1]to[User3],youcanselecttheconfigurationsatstartupfrom[User1]to[User3]in[PoweronSetting]in [SystemSettings]( 64).

Operating the Video Display

11

Exporting/Importing CDL Parameters ( 24)

1 Select [Adjustment] [CDL/User LUT].

2 Select [CDL 1-8].

3 Select [Detail Settings] [CDL Export] or [CDL Import].

Exporting 1Select[CDLPreset]. 2Selectafileformat".ccc"or".cdl".

Importing 1Select[Filename]. 2Select[CDLPreset].

4 Select [Execute]. Whentheconfirmationscreenappears,select[OK].Export/Importstarts.

Note Theexportedfileisautomaticallysavedunderthename"YYYYMMDDhhmmss_Presetname.ccc(cdl)".

Upto1000CDLimportfilesarerecognized.

Set Date/Time ( 61) ThissectiondescribeshowtosetthevideodisplayDate/Time.ThevideodisplayDate/Timewillberesetifthepower cordisnotconnectedforapproximately20days.

1 Select [System Settings] [Date/Time]. AscreentoinputtheDate/Timeappears.

2 Set the Date/Time. Theselectionframemovesandnumberschangeasyouoperatethejogdial.Repeatuntilyoucompletesetting theyear,month,date,hour,andminute.

3 Press the jog dial when you are finished. Theselectionframemovesto[OK].

4 Check the content and press the jog dial to confirm the settings.

Reference Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe displayed.

Operating the Video Display

12

Inputting Characters Thissectiondescribeshowtoinputthecharacters.

1 When the character input screen is displayed, use the jog dial ( ) to select the area you wish to input.

2 Select characters using the jog dial ( or rotation). Thefollowingcharacterscanbeselected:Press buttonstodisplaythemonebyone.

Alphanumericcharacters:AtoZ,atoz,0to9 Symbols:,.:;`-+/=%&!?#_|$^~@{}[]<>

()space Charactersthatcannotbeenteredareautomaticallyskipped.

3 Repeat steps 1 and 2 until the desired text has been input.

4 Press the jog dial when you are finished. Theselectionframemovesto[OK].

5 Check the content and press the jog dial to confirm the settings.

Reference Whenselecting[Cancel]orpressingMENUbuttonbeforeselecting[OK],thesettingswillberesetandthepreviousscreenwillbe displayed.

Toeraseacharacterintheselectionframe,presstheRESETbuttononthevideodisplay.

Operating the Video Display

13

Using the Function (F) Buttons YoucanassignfunctionstotheFbuttonsonthevideodisplaytoexecutetheminstantly.Youcanassigndifferent functionsonFbuttonsinthenormalandALTmodesrespectively.

1 Select [System Settings] [Function/Channel Button] [Function Button] or [Function Button (ALT)]. Thebuttonselectionscreenwillbedisplayed.

2 Select the button name and press the jog dial.

3 Select the function to assign. Refertothe"FunctiontoallowregistrationforthedisplayFbuttons( 66)"fortheavailablefunctions.

4 Press the jog dial. Thesettingisconfirmed.

Thefollowingcontentisassignedtofunctionbuttonsonthevideodisplaybyfactorydefault.

Fbutton Normalmode ALTmode

F1 PictureMode CDL/UserLUT

F2 Brightness CDLSOP/SAT

F3 TC/ALM CDL/UserLUTBypass

F4 WFM/VEC SingleInputDualView

F5 FrameHold FalseColor

F6 PixelValueCheck RangeCheck

F7 ZoomPreset 2020OutsideofGamutView

F8 Volume CompareView

Reference HoldingtheFbuttondownwilldisplaythefunctionselectionscreen,andyoucansetthefunctionyouwishtoregister.

YoucancheckthefunctionassignedtotheFbuttonsofthemainunit. Openthe [SystemSettings] [OSDSettings] [FunctionButtonGuide]menuandselect[On].Pressing/movingthe

jogdial( ,orRotate)whileOSDisnotshowingwilldisplaythelistoffunctions.Selectingafunctionfromthelistand

pressing/moving( )thejogdialwilldisplaythedetailedsettingsscreen,orexecutethatfunction.

Pressing whilethelistoffunctionsisdisplayedswitchesbetweennormalmodeandALTmode.

Operating the Video Display

14

Using the Channel (CH) Button Youcanassignchannels(varioussettingsrelatedtoinputsignal)totheCHbuttonsonthevideodisplayandswitch channelsinstantly.

1 Select [System Settings] [Function/Channel Button] [Channel Button]. Thebuttonselectionscreenwillbedisplayed.

2 Select the button name and press the jog dial.

3 Select the channel to assign. See[ChannelSettings]( 34)fortheconfigurablesettings.

4 Press the jog dial. Thesettingisconfirmed.

Operating the Video Display

15

Thefollowingcontentisassignedtochannelbuttonsonthevideodisplayandtoeachchannelbyfactorydefault.

CH CH1 CH2 CH3 CH4 CH5

InputConfiguration 12-3G/HD-SDI HDMI 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI

SelectInputSignal Automatic Automatic Automatic Automatic Automatic

ImageDivision Automatic Automatic Automatic Automatic Automatic

LinkOrder Automatic Automatic Automatic Automatic Automatic

Format Automatic Automatic Automatic Automatic Automatic

AudioInput Automatic Automatic Automatic Automatic Automatic

ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)

PictureMode Type Normal Normal Normal 4K/2K Normal

PictureMode PictureModeL Resolution4K

ITU-RBT.709 ITU-RBT.709 User2 (2020HLG)

User1 (2020PQ)

User1 (2020PQ)

PictureModeR Resolution2K

ITU-RBT.709

Payload UHD/PQ User1(2020PQ)

UHD/HLG User2(2020HLG)

UHD ITU-RBT.2020

709/PQ

709/HLG

709 ITU-RBT.709

VANC

Unknown

Camera CINEMAEOS SYSTEM

CINEMAEOSSYSTEM

ARRI User6

VARICAM User7

SingleInputDualView Off Off Automatic Automatic Off

Separator Off Off Off Off White

Operating the Video Display

16

CH CH6 CH7 CH8 CH9 CH10 and up

InputConfiguration 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI 12-3G/HD-SDI (Notset)

SelectInputSignal Automatic Automatic Automatic Automatic Automatic

ImageDivision Automatic Automatic Automatic Automatic Automatic

LinkOrder Automatic Automatic Automatic Automatic Automatic

Format Automatic Automatic Automatic Automatic Automatic

AudioInput Automatic Automatic Automatic Automatic Automatic

ChannelName (Blank) (Blank) (Blank) (Blank) (Blank)

PictureMode Type Normal 4K/2K Normal Normal Normal

PictureMode PictureModeL Resolution4K

User1 (2020PQ)

User2 (2020HLG)

User2 (2020HLG)

User2 (2020HLG)

ITU-RBT.709

PictureModeR Resolution2K

ITU-RBT.709

Payload UHD/PQ User1(2020PQ)

UHD/HLG User2(2020HLG)

UHD ITU-RBT.2020

709/PQ

709/HLG

709 ITU-RBT.709

VANC

Unknown

Camera CINEMAEOS SYSTEM

CINEMAEOSSYSTEM

ARRI User6

VARICAM User7

SingleInputDualView Automatic Automatic Off Automatic Off

Separator Off Off White Off Off

Note HoldingtheCHbuttondowndisplaysthechannellist,allowingtheusertoselectthedesiredchannel.When[SelectInputSignal] issetto[Automatic],theinputsignallistisdisplayedandthesignalcanbechangedtemporarily*. *Whenonlythe12G-SDI/6G-SDIsignalisinputorwhenavideothatcanbesimultaneouslydisplayedwiththe12G-SDI/6G-SDIsignalisinput.

Operating the Video Display

17

Checking Signal Information and Status of the Main Unit Thevideodisplayisequippedwithabannerdisplayfunction.

1 Press the jog dial when the OSD menu is closed. Thechannelname,signalinformation,andstatusofthemainunitwillbedisplayedinthebanner.Itwill automaticallydisappearafter6seconds.

Note Youcanselecthowthebannerisdisplayed([Banner] 62).

Youcanmonitortheinputsignalstatus.([SignalMonitoring] 51)

Formoredetailedsignalinformation,pleaserefertothesectionon[SignalInformation]( 68).

The[Detectingsync.]bannerwillcontinuetoappearuntiltheinputsignalissynchronized.

Operating the video display using an external device [GPI terminal] YoucanoperatethevideodisplayusinganexternaldeviceconnectedtotheGPIterminalandexecutethefunctions registeredineachpin.Remoteoperationispossibleonlywhenthevideodisplayisturnedon.

PinlayoutforGPIterminal PinNo. Signal Factorydefault

1 Pin1 CH1

2 Pin2 CH2

3 Pin3 CH3

4 Pin4 TimeCode

5 Pin5 TallyGreen Atallyappearsatthe topofthescreen.6 Pin6 TallyRed

7 Pin7 PowerOn

8 Pin8(GND)

1 Connect an external control device to the GPI terminal.

2 Select [System Settings] [GPI]. Thepinselectionscreenwillbedisplayed.

3 Select a pin number and press the jog dial.

4 Select the function to assign. See[SystemSettings]( 61)intheOSDmenuforsettablefunctions.

5 Press the jog dial. Thesettingisconfirmed.

Operating the Video Display

18

Operating the video display using an external device [LAN terminal] ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperatethevideodisplay usinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersandtallylightsonthescreen.Thereare twotallylights,ontheleftandright.Upto16characterscanbedisplayed.

Tallydisplay(left) Characterdisplay Tallydisplay(right)

1 Connect an external control device to the LAN terminal.

2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.

3 Select [Network/IMD Settings] [In Monitor Display].

4 Select [Control] [TSL Ver. 5.00]. Thiswillallowoperationfromanexternalcontroldevice,anddisplaycharactersandtallylights.

5 Select [Position] [Top] or [Bottom]. Thissetsthepositionwherecharactersandtallylightswillbedisplayed.

Note When[MultiView(Dual)]or[MultiView(Quad)]isdisplayed,setthe[INDEX]settingtofrom[0x0001]to[0x0004].

Theportnumberforthecontrollingisfixedat"45000".

With[InMonitorDisplay]youcanalsodisplayuser-selectedcharactersonthescreen.( 60)

Unicodecharacterscanbeusedindisplayedtextstrings.However,somecharactersmaynotbedisplayedcorrectly.

19

OSD Menu

Adjustment This menu is used to adjust the image quality. The factory defaults differ according to the [Picture Mode] setting. ( 31)

Sub Menu Setting Options (Bold: factory default)

Picture Mode

ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3 User 1 (2020 PQ) User 2 (2020 HLG) User 3 (DCI PQ) User 4 (DCI PQ D65) User 5 ~ User 9 CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)

Select a preset mode.

[ITU-R BT.709], [ITU-R BT.2020], [Adobe RGB], [DCI-P3]: Mode set to the brightness, color temperature, gamma/EOTF, and color gamut of the three primary colors chromaticity points of each standard.

[User 19] (User 1 (2020 PQ), User 2 (2020 HLG), User 3 (DCI PQ), User 4 (DCI PQ D65), User 5 ~ User 9): This mode allows you to set each

item in [Adjustment] individually. You can change the mode name within 24 one-byte characters including alphabetical characters, numbers, and symbols ( 28).

[CINEMA EOS SYSTEM]: Canon Log is the ideal mode for displaying images captured with Cinema EOS cameras. Using Camera Link, you can have the image quality setting change automatically ([Automatic Adjustment (CINEMA EOS)] 52).

[ACESproxy (ver. 1.0.1)]: A mode to display ACESproxy videos in optimum gamma/EOTF and color gamut.

[ACESproxy (ver. 1.0.1)] cannot be set when [Channel Settings] [Picture Mode] [Type] are [4K/2K] or [Automatic].

Luminance 0 to 1000.0 Adjusts the peak brightness (Increments of 0.1).

The luminance values are just a guide and not guaranteed absolute values.

Brightness -500 to 500 (0) Adjusts the black level of the image. (Increments of 1)

Chroma 0 to 2000 (1000) Adjusts the color saturation of the image (color depth). (Increments of 1)

[Chroma] is not settable in the following cases: - When [CDL/User LUT] is set to other than [OFF]

- When [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX]

- When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]

- When [2020 Constant Luminance] is set to [Constant]

- When the [Format] signal method is set to ICtCp or XYZ

- When [Picture Function Settings] [Compare View] [Enable] is set to [On]

OSD Menu

20

Sub Menu Setting Options (Bold: factory default)

BacklightControl LocalDimming Automatic/High/Low, Off

Switchesthebacklightcontrolmethod.

Localdimmingtechnologycontrolstheamountoflightemittedbythe backlightforeachdisplayarea.Thebacklightofbrightareaisincreased andthedarkareaisdecreasedaccordingtothedisplayedcontent.

[Automatic]:ThismodeissuitableforcheckingHDRimages. [High]:Thismodeissuitableforcheckingimageswithalotofbrightareas. [Low]:ThismodeissuitableforcheckingSDRimages.

ColorTemperature D93,D65,D65Custom, D61,D60,D56,D50, DCI-P3 Custom(xy),Off

Whenapresetis selected

GainR/G/B: 0to1023 BiasR/G/B: -500to500(0) WhenCustom(xy)is selected

x:0.260to0.360 y:0.260to0.360

Setsthecolortemperature.( 6)

[D93],[D65],[D61],[D60],[D56],[D50],[DCI-P3]:Selectfrompresetcolor temperatures.

[D65Custom]:Thispresetisforadjustingthecolorofthevideodisplay anddisplayshavingdifferentdisplaycharacteristics.Thegainand biasareadjustedbasedonD65.

[GainR/G/B],[BiasR/G/B]:Adjuststhepresetcolortemperature. (Incrementsof1)

[Custom(xy)]:AdjustsCIExandy.(Incrementsof0.001)

[Custom(xy)]and[GainR/G/B]or[BiasR/G/B]cannotbeselectedatthesame time.

When[GainR/G/B]or[BiasR/G/B]valueisadjusted,anasterisk[*]isdisplayed bycolortemperaturepresetmode.

Thecolorcoordinates(x,y)arejustaguideandnotguaranteedabsolutevalues.

ColorGamut ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3 Native CinemaGamutto709 CinemaGamutto2020 CinemaGamuttoDCI S-Gamut3to709 S-Gamut3to2020 S-Gamut3toDCI S-Gamut3.Cineto709 S-Gamut3.Cineto2020 S-Gamut3.CinetoDCI

Setsthecolorrange.

When[PictureMode] [User19]or[CINEMAEOSSYSTEM] [ITU-RBT.709],[ITU-RBT.2020],[AdobeRGB],[DCI-P3]:Colorgamut complianttoeachstandard. [Native]:Colorgamutthatcanbedisplayedbythisvideodisplay. [CinemaGamutto709],[CinemaGamutto2020], [CinemaGamuttoDCI]:Modeswherethecolorgamutisconvertedto

monitorCinemaGamutvideorecordedbytheCinemaEOScameras. [S-Gamut3to709],[S-Gamut3to2020],[S-Gamut3toDCI], [S-Gamut3.Cineto709],[S-Gamut3.Cineto2020], [S-Gamut3.CinetoDCI]:Presetmodeswherethecolorgamutis

converted.

[ColorGamut]cannotbesetinthefollowingcases. - When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-

HLG-1K-200)],[VARICAM(V-LogtoV-709)],[RED(Log3G10to709/1886)],

[RED(Log3G10to2020/PQ)],[2020PQto2020SDR],[2020PQto709

SDR],[2020HLGto709HLG]or[2020HLGto709SDR]isselected.

ForcheckingthevideocapturedwithCinemaEOScameras,pleaserefertothe "ParameterofCinemaEOScamerasandCanondisplays( 54)".

OSD Menu

21

Sub Menu Setting Options (Bold: factory default)

Gamma/EOTF 1.0,2.2,2.35,2.4,2.6, ITU-RBT.1886 SMPTEST2084(PQ) HybridLog-Gamma CanonLog CanonLog(HDR) CanonLog2 CanonLog2(HDR) CanonLog3 CanonLog3(HDR) S-Log2(HDR) S-Log3(HDR)

SetstheGamma/EOTF.

[1.0],[2.2],[2.35],[2.4],[2.6],[ITU-RBT.1886],[CanonLog],[CanonLog2], [CanonLog3]:Selectthepresetgamma. [SMPTEST2084(PQ)],[HybridLog-Gamma],[CanonLog(HDR)], [CanonLog2(HDR)],[CanonLog3(HDR)],[S-Log2(HDR)], [S-Log3(HDR)]:Selectthegamma/EOTFforHDRdisplay.

About[HybridLog-Gamma] ThismethodprocessesthesystemgammafortheYsignal(Compliant withITU-RBT.2100).Thenthesystemgammavaluewillbedisplayedin theSettingOptionsonthemenuscreen.

Notsettableinthefollowingcases: - When[ACESproxy(ver.1.0.1)]isselectedin[PictureMode]

- When[CDL/UserLUT] [ARRI(Rec2100-PQ-1K-100)],[ARRI(Rec2100-

HLG-1K-200)],[VARICAM(V-LogtoV-709)],[RED(Log3G10to709/1886)],

[RED(Log3G10to2020/PQ)],[2020PQto2020SDR],[2020PQto709

SDR],[2020HLGto709SDR]isselected.

ForcheckingthecapturedvideowithCinemaEOScamerasandARRI/ Panasoniccinemacameras,pleasereferto[CameraLink] [Automatic Adjustment]( 52).

Relationshipbetween[ColorGamut]and[Gamma/EOTF]thatcanbeselected ( 29).

OSD Menu

22

Sub Menu Setting Options (Bold: factory default)

HDRRange SetsthedisplaymethodwhenGamma/EOTFforHDRdisplayisselected.

SMPTEST2084(PQ) 100to10000(1000) Setsthe[SMPTEST2084(PQ)]dynamicrangetobedisplayed,from0.005 to10,000cd/m2(nits).(100to4000:100increments.4000to10000: 1000increments)

HybridLog-Gamma 100to1000 Setshowfartodisplaythe[HybridLog-Gamma]dynamicrange. (inincrementsof100) Theupperlimitvaluewillchangetomatchthesettingsof[HLGSystem Gamma].( 27)

CanonLog(HDR) 100to800 Setsthe[CanonLog]dynamicrangetobedisplayed,from0to800%.(in 100increments)

CanonLog2(HDR) 100to1600 Setsthe[CanonLog2]dynamicrangetobedisplayed,from0to1600%. (in100increments)

CanonLog3(HDR) 100to1600 Setsthe[CanonLog3]dynamicrangetobedisplayed,from0to1600%. (in100increments)

S-Log2(HDR) 100to1400(1000) Setshowfartodisplaythe[S-Log]dynamicrange.(in100increments)

S-Log3(HDR) 100to3900(1000)

Setting procedures Theexplanationuses[SMPTEST2084(PQ)]asanexample. Whensetat[1000],thoseareasthatexceed1,000cd/m2areclipped,andthosethatare1,000cd/m2orbelowareassigned tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof1,000cd/m2,youcanchecktheentire dynamicrangeoftheimage.Also,whendisplayinganimagewithaPQof4,000cd/m2,youcanchecktheimageupto 1,000cd/m2. Whensetat[4000],thoseareasthatexceed4,000cd/m2areclipped,andthosethatare4,000cd/m2orbelowareassigned tothedynamicrangeofthevideodisplay.WhendisplayinganimagewithaPQof4,000cd/m2,althoughtheapparent brightnesslowers,youcanstillcheckallthedynamicrangeoftheimage. ThebrightnessofthevideodisplaycorrespondstothevaluesetforLuminance.

4,000 cd/

1,000 cd/

4,000 cd/

1,000 cd/1,000 cd/ 1,000 cd/

SMPTE ST 2084 (PQ) 4,000 cd/m2 signal

(Luminance: [1000.0])

SMPTEST2084(PQ):Setto[4000]SMPTEST2084(PQ):Setto[1000]

SMPTEST2084 (PQ)range

SMPTEST2084 (PQ)range

Rangeof DP-V1830

Rangeof DP-V1830

Gradationisreproducedbyassigning therangetotherangeofthe DP-V1830(whichlowers thebrightness).Clip(Saturatesgradation.)

Brightnessvalue correspondingto the[Luminance] setting

OSD Menu

23

Sub Menu Setting Options (Bold: factory default)

ColorRange Automatic Full SDIFull(4-1019) Limited

Setsthequantizationrange.

[Automatic]:Setstherangebasedonsignalinformationautomatically.

Settingisdisabledwhen[ACESproxy(ver.1.0.1)]isselectedfor[PictureMode]. Operationswhen[Automatic]isselectedaredescribedbelow. - ItissetinaccordancewiththesettingsifColorRangesettingsareincludedin

thecamerametadata.Whenthereis[FullRange]metadatainPayloadwhen

SDIisselected,itwillbesetto[SDIFull].

- WhenHDMIisselected,[Full]or[Limited]issetautomaticallydependingon

HDMIsignalinformation.

- WhenSDIisselected,thesettingisconfiguredaccordingtothesettingsfor

[PictureMode],[ColorGamut],and[Gamma/EOTF]( 30).

Operationswhen[Format]issetto[ICtCp]aredescribedbelow. - When[ColorRange]issettootherthan[Full],[WaveFormMonitor]willdisplay

onlyasignalsetwith[ColorRange].

OutputTransform ITU-RBT.709 ITU-RBT.2020 DCI-P3

When[PictureMode] [ACESproxy(ver.1.0.1)]

[ITU-RBT.709],[ITU-RBT.2020],[DCI-P3]:ACESproxyisconvertedinto respectivemode.

OutputTransformSurround DimSurround DarkSurround

When[PictureMode] [ACESproxy(ver.1.0.1)]

[DimSurround]:EnablesDimSurroundprocessspecifiedbyACESproxy. [DarkSurround]:EnablesDarkSurroundprocessspecifiedbyACESproxy.

OSD Menu

24

Sub Menu Setting Options (Bold: factory default)

CDL/User LUT Configures settings for CDL or User LUT.

CDL/User LUT CDL 1 to CDL 8 User LUT 1 to User

LUT 8 Off

Only when [Picture Mode] is [User 1-9] ARRI (Rec2100-PQ-

1K-100) ARRI (Rec2100-HLG-

1K-200) VARICAM (V-Log to

V-709) RED (Log3G10 to

709/1886) RED (Log3G10 to

2020/PQ) 2020 PQ to 2020 SDR 2020 PQ to 709 SDR 2020 HLG to 709 HLG 2020 HLG to 709 SDR

Select a preset such as CDL or external LUT.

When [ARRI (Rec2100-PQ-1K-100)] or [RED (Log3G10 to 2020/PQ)] is selected, [HDR Range] [SMPTE ST 2084 (PQ)] setting is less than 1000, the setting becomes [1000].

When [ARRI (Rec2100-HLG-1K-200)] is selected, [HDR Range] [Hybrid Log- Gamma] settings become [1000].

[Color Gamut] and [Gamma/EOTF] are set in accordance with the [User LUT] settings ( 30).

Not settable in the following cases: - When [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX]

- When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]

- When [2020 Constant Luminance] is set to [Constant]

- When the [Format] signal method is set to ICtCp or XYZ

l When [CDL 1-8] is selected

Power 0.50 to 4.00 (1.00) Adjusts the Gamma of the image. (0.01 increments)

Saturation 0.000 to 2.000 (1.000) Adjusts the color saturation of the image. (0.001 increments)

Offset -1.000 to 1.000 (0.000) Adjusts the black level of the image. (0.001 increments)

Slope 0.000 to 2.000 (1.000) Adjusts the white level of the image. (0.001 increments)

Bypass On, Off When set to [On], you can temporarily disable the CDL adjustment result and return to previously set image quality.

Parameters are stored until the video display is turned off. Bypass is set to [Off] in the following cases:

- [Picture Mode] has been changed

- When the [CDL/User LUT] setting has been changed

- [Picture Function Settings] [Compare View] [Enable] settings have been

changed

When [Picture Function Settings] [Compare View] [Enable] [On], this item is fixed to [Off].

OSD Menu

25

Sub Menu Setting Options (Bold: factory default)

DetailSettings

CDLExport ExportsCDLparameters.

CDLPreset CDL1toCDL8 All

FileType CCC,CDL

Execute

CDLImport ImportsCDLparameters.

Filename

CDLPreset CDL1toCDL8

Execute

CDLPresetName Youcanchangethenameof[CDL1-8]within16charactersincluding alphabeticalcharacters,numbers,andsymbols.

AnchorCDL Youcantemporarilysaveparametersfor[Power],[Saturation],[Offset], and[Slope]andrecoverthevalues.(anchorpointsetting)

ResetCDL ResetsCDLparameters.

lWhen[UserLUT1-8]isselected Selectapresetofthe3D-LUT.

3D-LUT SelectstheUserLUT(3D-LUT)toapplyandimportsanexternalLUT(3D-LUT).

3D-LUT 3D-LUT1to3D-LUT8 Off

Selectthe3D-LUT(preset)savedinoneof[UserLUT1-8].

LUTImport Sameas[DetailSettings] [LUTImport],[LUTName],[LUTDelete] ( 26)

Cannotbesetwhen[3D-LUT] [Off].

LUTName

LUTDelete

ColorRange Automatic,Manual Setsthemethodofcolorrangeconversionperformedbeforeandafter UserLUTprocessing(input/output).

[Automatic]:Thecolorrangeisautomaticallyconvertedbeforeandafter UserLUTprocessing(input/output).

- When[ColorRange] [Limited]( 23):[Input]issetto[Limitedto Full].[Output]issetto[FulltoLimited].

- When[ColorRange] [Full]( 23)*:[Input]and[Output]aresetto[Off]. *[SDIFull(4-1019)]isincluded.

[Manual]:Sets[Input]or[Output].

OSD Menu

26

Sub Menu Setting Options (Bold: factory default)

Input LimitedtoFull,Off When[ColorRange] [Manual] SetsthemethodofrangeconversionperformedbeforeUserLUT processing.

[LimitedtoFull]:Performstheprocessforconvertingto[Full]. [Off]:Thecolorrangeisnotconverted.

Output FulltoLimited,Off When[ColorRange] [Manual] SetsthemethodofrangeconversionperformedafterUserLUT processing.

[FulltoLimited]:Performstheprocessforconvertingto[Limited]. [Off]:Thecolorrangeisnotconverted.

Imagesignal informationdisplay

Apply,Donotapply SelectwhetherornottoapplytheLUTwhenthewaveformmonitor, vectorscopeorotherimagesignalinformationisdisplayed.

Bypass On,Off Whensetto[On],youcanreturntotheimagequalitybeforeUserLUT wasapplied.

When[PictureFunctionSettings] [CompareView] [Enable] [On],thisitem isfixedto[Off].

Parametersarestoreduntilthevideodisplayisturnedoff. Bypassissetto[Off]inthefollowingcases: - [PictureMode]hasbeenchanged

- Whenthe[CDL/UserLUT]settinghasbeenchanged

- [PictureFunctionSettings] [CompareView] [Enable]settingshavebeen

changed

UserLUTPresetName Youcanchangethenameof[UserLUT1-8]within24charactersincluding one-bytealphabeticalcharacters,numbers,andsymbols.

DetailSettings SetsdetailsforPictureMode.

LUTImport YoucanimportLUT.Filenamesthatcanbeimportedcanbeupto64one-bytecharacters,including alphabeticalcharacters,numbers,andsymbols(includingfileextensions).( 9)

Filename Selectafilename.

LUTType 3D-LUT SelecttheLUTtype.

SelectLUT 3D-LUT1-8 SelectthesavedestinationfortheLUTtobeimported.

Execute Performsimport.

LUTName YoucanspecifythenameofLUTwithinone-byte24charactersincludingalphabeticalcharacters, numbers,andsymbols.

LUTType Sameas[LUTImport]

SelectLUT

InputName InputtheLUTname.

LUTDelete DeletesimportedLUT.

LUTType Sameas[LUTImport]

SelectLUT

Delete DeletesLUT.

OSD Menu

27

Sub Menu Setting Options (Bold: factory default)

YCbCrColorMatrix Automatic ITU-RBT.709 ITU-RBT.2020

SetsthematrixconversionmethodforinputsignalsinYCbCrformat.

[Automatic]:MatrixcoefficientissetinconformancewiththeITU-R BT.2020standardwhenthe[PictureMode]or[ColorGamut]settingis [ITU-RBT.2020]andinconformancewiththeITU-RBT.709standard otherwise.

[ITU-RBT.709]:MatrixcoefficientissetinconformancewiththeITU-R BT.709standard.

[ITU-RBT.2020]:MatrixcoefficientissetinconformancewiththeITU-R BT.2020standard.

Settingisdisabledwhen[ACESproxy(ver.1.0.1)]isselectedfor[PictureMode].

2020Constant Luminance

ConstantLuminance Non-constant

Luminance

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] Setsthecolormatrixconversionmethod.

[ConstantLuminance]:YUVsignalsarelinearlyconvertedandthen convertedintoRGBsignals.

[Non-constantLuminance]:YUVsignalsareconvertedintoRGBsignals withoutchanginggamma0.45.

Notsettableinthefollowingcases: - When[Gamma/EOTF]issetto[CanonLog],[CanonLog2]or[CanonLog3] - Whenthe[Format]signalmethodissettoICtCporXYZ

2020GamutMapping GamutMapping Clipping

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] [GamutMapping]:Mappingisperformedoncolorsoutsidethenative

colorgamutbyCanon'suniquemethod. [Clipping]:Colorsoutsidethenativecolorgamutareclippedbyageneral

method.

HLGSystemGamma Automatic Manual

WhenManualis selected

[Gamma/EOTF] When[HybridLog- Gamma] 1.000to1.500(1.200)

When[Gamma/EOTF] [HybridLog-Gamma] Setsthesystemgammaorpeakluminance.

[Automatic]:When[HybridLog-Gamma]isselected,itadjuststhesystem gammaautomaticallytomatchtheluminanceandHDRrange.

[Manual]:When[HybridLog-Gamma]isselected,adjuststhesystem gamma.(Incrementsof0.005) Themaximumvalueforeachsettingbecomestheupperlimitvalueof [HDRRange].

OSD Menu

28

Sub Menu Setting Options (Bold: factory default)

HDMILink When[PictureMode] [User19] Video isdisplayedat the imagequality linked to thevideo imagequalitysettingusing theHDMI metadata.

ParameterofHDMImetadataandVideoDisplay( 30)

AutomaticAdjustment On,Off TurnstheHDMIlinkon/off.

ColorGamut/Gamma/ EOTF

On,Off Matchesthe[ColorGamut]and[Gamma/EOTF]settingsofthevideo displaywiththeHDMImetadata.

Luminance/HDRRange On,Off Matchesthe[Luminance]and[HDRRange]settingofthevideodisplay withtheHDMImetadata.

CopyPictureMode When[PictureMode] [User19] CopythePictureModesettings.

Inother[PictureMode],theresultsofcalibrationperformedatthefactoryarecopied.

PictureMode(Copy from)

ITU-R BT.709 ITU-RBT.2020 AdobeRGB DCI-P3 User1(2020PQ) User2(2020HLG) User3(DCIPQ) User4(DCIPQD65) User5~User9

Select"PictureMode(Copyfrom)".

[User19]:Selectfromotherthanthecurrentlysetmode.

Execute Performscopy.

PictureModeName Youcanchangethenameof[User19]within24charactersincluding alphabeticalcharacters,numbers,andsymbols.

AnchorAdjustment OK Cancel

Temporarilysavesparametersforadjusting[Luminance],[Brightness], [Chroma],and[HDRRange]andrecoverthevalues(anchorpointsetting).

[OK]:Performsanchorpointsetting. [Cancel]:Returnstothepreviousscreenwithoutsettinganchorpoint.

Reset OK Cancel

Return[PictureMode]tofactorydefault.Notethatin[User19]mode whereyouareperformingcalibration,thesettingreturnstothevalueafter calibrationinsteadofthefactorydefault. Whenselected,themessage[ResetAdjustmentsettingstodefaults?] appears.

[OK]:Performsreset. [Cancel]:Returnstothepreviousscreenwithoutresetting.

OSD Menu

29

Relationship between [Color Gamut] and [Gamma/EOTF] that can be selected When[ColorGamut]ischanged,[Gamma/EOTF]ischangedtotheunderlinedvalue(defaultvalue)whenthecurrent[Gamma/EOTF]settings

arenotselectable.

PictureMode ColorGamut SelectableGamma/EOTF

ITU-RBT.709,

ITU-RBT.2020

Cannotbeselected 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,

CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR)

AdobeRGB 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886

DCI-P3 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),

S-Log2(HDR),S-Log3(HDR)

CINEMAEOS

SYSTEM,

User1-9

ITU-RBT.709,

ITU-RBT.2020

1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,

CanonLog3(HDR),S-Log2(HDR),S-Log3(HDR)

AdobeRGB 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886

DCI-P3 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),CanonLog,

CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,CanonLog3(HDR),

S-Log2(HDR),S-Log3(HDR)

Native 1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ)

CinemaGamutto709,

CinemaGamutto2020

2.2,CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,

CanonLog3(HDR)

CinemaGamuttoDCI CanonLog,CanonLog(HDR),CanonLog2,CanonLog2(HDR),CanonLog3,Canon

Log3(HDR)

S-Gamut3to709

S-Gamut3to2020

S-Gamut3.Cineto709

S-Gamut3.Cineto2020

1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),HybridLog-Gamma,

S-Log2(HDR),S-Log3(HDR)

S-Gamut3toDCI

S-Gamut3.CinetoDCI

1.0,2.2,2.35,2.4,2.6,ITU-RBT.1886,SMPTEST2084(PQ),S-Log2(HDR),S-Log3

(HDR)

OSD Menu

30

Operations when [Color Range] [Automatic] (when SDI is selected)

SettingOptions ColorRangetobeSet

PictureMode DCI-P3

Full

ColorGamut DCI-P3

CinemaGamuttoDCI

Gamma/EOTF

CanonLog(HDR)

CanonLog2(HDR)

CanonLog3(HDR)

S-Log2(HDR)

S-Log3(HDR)

Otherthantheabove Limited

Parameter of [User LUT] and [Color Gamut] / [Gamma/EOTF]

UserLUT ColorGamut Gamma/EOTF

ARRI(Rec2100-PQ-1K-100) ITU-RBT.2020 SMPTEST2084(PQ)

ARRI(Rec2100-HLG-1K-200) ITU-RBT.2020 HybridLog-Gamma

VARICAM(V-LogtoV-709) ITU-RBT.709 2.2

RED(Log3G10to709/1886) ITU-RBT.709 ITU-RBT.1886

RED(Log3G10to2020/PQ) ITU-RBT.2020 SMPTEST2084(PQ)

2020PQto2020SDR ITU-RBT.2020 2.4

2020PQto709SDR ITU-RBT.709

2020HLGto709HLG ITU-RBT.709 (Userselectable)

2020HLGto709SDR ITU-RBT.709 2.4

Parameter of HDMI metadata and Video Display

HDMImetadata Videodisplaysetting

ColorGamut BT.709 ITU-RBT.709

BT.2020 ITU-RBT.2020

Gamma/EOTF

TraditionalSDR 2.2

PQ PQ

HybridLog-Gamma HybridLog-Gamma

OSD Menu

31

Details of the factory default settings for each [Picture Mode]

Item ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3

Luminance 100.0 100.0 100.0 48.0

Brightness 0 0 0 0

Chroma 1000 1000 1000 1000

BacklightControl LocalDimmingLow LocalDimmingLow LocalDimmingLow LocalDimmingLow

Color Temperature

Preset D65 D65 D65 DCI-P3

x 0.313 0.313 0.313 0.314

y 0.329 0.329 0.329 0.351

GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)

BiasR/G/B 0 0 0 0

ColorGamut ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3

Gamma/EOTF 2.2 2.2 2.2 2.6

ColorRange Automatic Automatic Automatic Automatic

OutputTransform

OutputTransform Surround

CDL/UserLUT Off Off Off Off

YCbCrColorMatrix Automatic Automatic Automatic Automatic

2020ConstantLuminance Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

2020GamutMapping Clipping Clipping Clipping Clipping

HLGSystemGamma Automatic Automatic Automatic Automatic

HDMILink Off Off Off Off

PictureModeName

OSD Menu

32

Item User 1 User 2 User 3 User 4 User 5 to

User 9

Luminance 1000.0 1000.0 1000.0 1000.0 100.0

Brightness 0 0 0 0 0

Chroma 1000 1000 1000 1000 1000

BacklightControl LocalDimming Automatic

LocalDimming Automatic

LocalDimming Automatic

LocalDimming Automatic

LocalDimming Low

Color Temperature

Preset D65 D65 DCI-P3 D65 D65

x 0.313 0.313 0.314 0.313 0.313

y 0.329 0.329 0.351 0.329 0.329

GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)

BiasR/G/B 0 0 0 0 0

ColorGamut ITU-RBT.2020 ITU-RBT.2020 DCI-P3 DCI-P3 ITU-RBT.709

Gamma/EOTF SMPTEST2084 (PQ)

HybridLog- Gamma

SMPTEST2084 (PQ)

SMPTEST 2084(PQ)

2.2

ColorRange Automatic Automatic Automatic Automatic Automatic

OutputTransform

OutputTransform Surround

CDL/UserLUT Off Off Off Off Off

YCbCrColorMatrix Automatic Automatic Automatic Automatic Automatic

2020ConstantLuminance Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

Non-constant Luminance

2020GamutMapping Clipping Clipping Clipping Clipping Clipping

HLGSystemGamma Automatic Automatic Automatic Automatic Automatic

HDMILink Off Off Off Off Off

PictureModeName User1 (2020PQ)

User2 (2020HLG)

User3 (DCIPQ)

User4 (DCIPQD65)

User5to User9

OSD Menu

33

Item CINEMA EOS SYSTEM ACESproxy (ver. 1.0.1)

Luminance 1000.0 48.0

Brightness 0 0

Chroma 1000 1000

BacklightControl LocalDimmingAutomatic LocalDimmingLow

Color Temperature

Preset D65 D60

x 0.313 0.322

y 0.329 0.338

GainR/G/B 1023/1023/1023(When[D65Custom]:1000/1023/1023)

BiasR/G/B 0 0

ColorGamut ITU-RBT.2020

Gamma/EOTF CanonLog2(HDR)

ColorRange Automatic

OutputTransform DCI-P3

OutputTransform Surround

DarkSurround

CDL/UserLUT Off Off

YCbCrColorMatrix Automatic Automatic

2020ConstantLuminance Non-constantLuminance Non-constantLuminance

2020GamutMapping Clipping Clipping

HLGSystemGamma Automatic Automatic

HDMILink Off Off

PictureModeName

OSD Menu

34

Channel Settings Thismenuisusedforinputrelatedsettings.Selectthe[SelectChannel]andchooseachannelnumberfromCH1to CH20.Finallydefinetheparameterofeachofthe[ChannelSettings]. "SupportedSignalFormat"( 69)

Sub Menu Setting Options

SelectChannel CH1toCH20 Displaythechannelnumber.Inaddition,youcanassigneachcontentof [ChannelSettings]toeachchannel( 14).

Itmaytake3secondswhenswitchingchannels.

InputConfiguration 12-3G/HD-SDI HDMI (Notset)

Selecttheinput.Factorydefaultdependonthechannel( 15).

SelectInputSignal Automatic QuadInput DualInputA,B DualInputC,D SingleInputA SingleInputB SingleInputC SingleInputD

Setsthesignaldisplaymethod.

[Automatic]:Thedisplaymethodisautomaticallydeterminedtomatchthe inputsignal.

[QuadInput]:Fourinputsignals(InputAtoInputDterminals)are displayed.

[DualInputA,B]:Twoinputsignals(InputAterminalandInputBterminal) aredisplayed.

[DualInputC,D]:Twoinputsignals(InputCterminalandInputDterminal) aredisplayed.

[SingleInputA],[SingleInputB],[SingleInputC],[SingleInputD]:One inputsignal(anyofInputAtoInputD)isdisplayed.

Settingsthatcanbesetdifferaccordingtotheinputsignal. - [HDMI]:Thisisfixedto[Automatic].

ImageDivision When[InputConfiguration] [12-3G/HD-SDI]

Setsthedisplaymethodwhenusingeither[QuadInput]or[DualInput].Twodivisionmethods "SquareDivision"and"2SampleInterleave"aresupportedfor4Kvideosignals.

Automatic

[SelectInputSignal] When[QuadInput] SquareDivision

2SampleInterleave

[SelectInputSignal] When[QuadInput] MultiView(Quad)

[SelectInputSignal] When[DualInput] MultiView(Dual)

[Automatic]:Automaticallydeterminedbasedonpayloadanddisplayed. [SquareDivision]:Displaysasignaltransmittedoverfourinputsasasingle

image. [2SampleInterleave]:Displaysasignaltransmitteddividedintoa2K/HD

signalasasingleimage. [MultiView(Quad)]:Eachoftheimagesfromthefourinputsareshownin

fourscreens. [MultiView(Dual)]:Eachoftheimages(InputsA/BorInputsC/D)fromthe

twoinputsareshownintwoscreens.

SelectInputSignal:QuadInput,ImageDivision:SquareDivision

Whenusing[MultiView(Quad)],theleftandrightpartsof2048x1080imageswill betrimmedtodisplayanareaof1920x1080.

For2048x1080imageswhenusing[MultiView(Dual)],theimagesaredisplayed inreducedsizewhen[ScreenScaling]issetto[Automatic].Theleftandright partsofimageswillbetrimmedfordisplaywhenanythingotherthan[Automatic] isselected.

OSD Menu

35

Sub Menu Setting Options

Link Order Automatic Off

Automatically detects and displays correct terminal order based on payload when using [2 Sample Interleave].

Format SDI Signal Automatic 4:2:2 YCbCr 10-bit 4:2:2 YCbCr 12-bit 4:4:4 YCbCr 10-bit 4:4:4 YCbCr 12-bit 4:2:2 ICtCp 10-bit 4:2:2 ICtCp 12-bit 4:4:4 ICtCp 10-bit 4:4:4 ICtCp 12-bit 4:4:4 RGB 10-bit 4:4:4 RGB 12-bit 4:4:4 XYZ 10-bit 4:4:4 XYZ 12-bit HDMI Signal Automatic

Sets the color format and gradation.

[Automatic]: Sets automatically to match the input signal.

The HD-SDI signal is either [4:2:2 YCbCr 10-bit] or [4:2:2 ICtCp 10-bit]. If [Automatic] is selected, they are rendered in a Payload that is selected in the

order A B C D. The settings for correctly displaying ICtCp format signals are as follows.

- [Picture Mode]: [ITU-R BT.709] or [ITU-R BT.2020]

- [Color Gamut]: [ITU-R BT.709] or [ITU-R BT.2020]

- [Gamma/EOTF]: [SMPTE ST 2084 (PQ)] or [Hybrid Log-Gamma]

If you need to use the ICtCp format for SDI signals, select any of the following to match the signal: [4:2:2 ICtCp 10-bit], [4:2:2 ICtCp 12-bit], [4:4:4 ICtCp 10-bit], [4:4:4 ICtCp 12-bit]

To use 4:4:4 XYZ 10-bit for SDI signals, select [4:4:4 XYZ 10-bit]. Then, signals will be processed as signals where XYZ data is included in RGB data output in 4:4:4 RGB 10-bit format.

With SDI signals, when [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX], or when [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3], operation changes as follows according to the color format. - ICtCp/RGB: Operates as YCbCr

- XYZ: Operates as RGB

Audio Input [Select Input Signal] When [Quad Input] Automatic, Input A, Input B, Input C, Input D When [Dual Input A,B] Automatic, Input A, Input B When [Dual Input C,D] Automatic, Input C, Input D

Sets the audio terminal.

[Automatic]: Sets automatically to match the input signal.

For [Select Input Signal] [Automatic] or [Single Input], it is fixed at [Automatic].

Channel Name Sets the name of the selected channel. You can input up to 16 alphanumeric characters.

OSD Menu

36

Sub Menu Setting Options

PictureMode Set[PictureMode]byindividualchannel.

Type Normal 4K/2K Automatic

[Normal]:Setsone[PictureMode]. [4K/2K]:Sets[PictureMode]byindividual4Kor2Ksignalscreen. [Automatic]:[PictureMode]issetaccordingtotheSDIsignal.Theset

[PictureMode]ischangedtointheordercamerametadata Payloadresolution(4K/2K).

[Type] When[Normal] PictureMode

When[4K/2K] Resolution4K,2K

When[Automatic] Resolution4K,2K Payload UHD/PQ, UHD/HLG,UHD, 709/PQ, 709/HLG,709, VANC,Unknown Camera CINEMAEOS SYSTEM, ARRI,VARICAM

ITU-RBT.709 ITU-RBT.2020 AdobeRGB DCI-P3 User1(2020PQ) User2(2020HLG) User3(DCIPQ) User4(DCIPQD65) User5~User9 CINEMAEOSSYSTEM ACESproxy(ver.1.0.1) (Notset)

Setthe[PictureMode]foreachscreen.

[ACESproxy(ver.1.0.1)]:Canbesetwhen[Type]is[Normal]. [](Notset):Cannotautomaticallychangeimagequalitytosuitinput

signal.Canbesetwhenotherthan[Resolution4K]and[Resolution 2K]areselectedin[Type] [Automatic].

ColorimetryBit/TransferCharacteristicsoftheSDIPayloadIDsupportsthesignal inconformitywiththefollowingstandard.

SMPTEST2082-10:2018(12G-SDI)

SMPTEST2081-10:2018(6G-SDI)

SMPTEST425-1:2017(3G-SDISingleLink/SquareDivision)

SMPTEST425-3:2019(3G-SDIDualLink(2SI))

SMPTEST425-5:2019(3G-SDIQuadLink(2SI))

SMPTEST292-1:2018(HD-SDI)

Settingsthatcanbesetdifferaccordingtotheinputsignal. - [InputConfiguration] [HDMI]:[4K/2K]and[Automatic]cannotbesetin[Type].

SingleInputDualView Automatic,Off Whenotherthan[ImageDivision] [MultiView(Quad)]or[MultiView(Dual)] Theimagefromtheinputsignalcanbereducedandshownin dual-screen.

[Automatic]:Whenthe[PictureFunctionSettings]SubMenuitemsareset to[On],identicalimagesareautomaticallyshownanddual-screen comparisoncanbemade.4Kimagesareshowninreducedsize. Relevant[PictureFunctionSettings]SubMenuitems: [Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamut View],[Monochrome],[BlueOnly],[RedOff],[GreenOff],[BlueOff], and[CompareView]

Cannotbeusedwhenanunsupportedvideosignalisinput.

Separator White Half Black Off

Inthefollowingcases,screenborderswillbedisplayed. - When[MultiView(Quad)]or[MultiView(Dual)]isselected

- When[SingleInputDualView]issetto[Automatic]andtheimagesare shownnexttoeachotherforimagecomparison

- When[PictureFunctionSettings] [CompareView] [Enable]is[On]

OSD Menu

37

Display Settings Thismenuisusedtoconfigurethedisplaymethod.

Sub Menu Setting Options (Bold: factory default)

ScreenScaling NativeInputResolution 200% Automatic

Defineshowthevideoisscaledanddisplayedonthescreen.

[NativeInputResolution]:Displaystheinputsignalwithoutscaling.

1920x1080(original)

[200%]:Doublestheverticalandhorizontaldimensions.

1920x10803840x2160

[Automatic]:Fitssizetofillscreen.

1920x10803840x21604096216038402025

Inthefollowingcases,themaximummagnificationis200%evenif[Automatic]is selected. - When[Peaking],[FalseColor],or[RangeCheck] [Enable]issettoanoption

otherthan[Off]

Inthefollowingcases,imagesareshowninreducedsizewhen[Automatic]is selected. - [40962160]:When[ImageDivision] [SquareDivision]isselected

- [20481080]:When[ImageDivision] [MultiView(Dual)]isselected

Anamorphic x2.0 x1.8 x1.5 x1.33 Off

Setwhencheckingimagesphotographedusingananamorphiclens. Displayedinaccordancewiththesetmagnification.

Settingsareinvalidinthefollowingcases: - When[Peaking],[FalseColor],or[RangeCheck] [Enable]issettoanoption

otherthan[Off]

- Whentheinputsignalresolutionis1280x720orless

OSD Menu

38

Sub Menu Setting Options (Bold: factory default)

Video Position (Multi View)

Top Middle Center

When using [Multi View (Quad)], [Multi View (Dual)], or [Single Input Dual View] Sets the vertical display position for the image.

[Top]: Displays at the top of the screen. [Middle]: Displays at the top middle of the screen. [Center]: Displays at the middle of the screen.

Zoom Enlarges part of the video image. The zoom function can be used when the resolution is [4096x2160], [3840x2160], [2048x1080] or [1920x1080].

The zoom function cannot be used in the following cases: - During execution of [Playback File] under [Screen Capture]

- During display of the test pattern

- When [Multi View (Quad)], [Multi View (Dual)] or [Single Input Dual View] is selected

- When [Picture Function Settings] [Compare View] [Enable] is set to [On]

While the zoom function is in use, the various markers are not displayed. When zoom settings are changed, [Frame Hold] turns [Off].

Zoom Preset Zoom 1 Zoom 2 Zoom 3 Off

Sets the zoom display method. There are three presets.

Magnification x2 x4 x8

Sets the display scale of zoom.

Position The zoom adjustment screen is displayed. Use the jog dial to adjust the display position.

Frame Hold On, Off Pauses the video.

If the image quality setting is changed while the video is paused, the setting may not change correctly.

In the case of an interlaced signal, the video pauses in either field (odd or even).

I/PsF Automatic Interlace PsF

Defines how the interlace signal or PsF signal is displayed.

[Automatic]: Automatically determined based on payload and displayed. If there is no payload, the signal is displayed as an interlace signal.

[Interlace]: Displayed as an interlace signal. [PsF]: Displayed as a PsF signal.

I/P Conversion Automatic Normal

Select the interlaced signal I/P conversion method.

[Automatic]: In this mode, video and still image are determined, and conversion corresponding to the type of image is automatically performed.

[Normal]: In this mode, video and still image are not determined, and predetermined conversion processing is performed.

OSD Menu

39

Audio Settings Thismenuisusedtosetaudiooutput.

Sub Menu Setting Options (Bold: factory default)

CHL(SDI) CH1toCH16(CH1) Setstheaudiotobeoutputfromthetwochannels(L/R)oftheheadphone respectively.

CHR(SDI) CH1toCH16(CH2)

CHL(HDMI) CH1toCH8(CH1)

CHR(HDMI) CH1toCH8(CH2)

Volume(speaker) 0to100(30) Setsthevolumeofthespeakerorheadphone/AUDIOOUTterminal. (Incrementsof1) Whentheheadphoneisconnectedtotheheadphoneterminal,output fromthespeakerstops.

TheAUDIOOUTterminalcanbeusedatthesametimeasthespeaker.

ThevolumeoftheheadphoneandAUDIOOUTterminalisthesame.

Volume( /AUDIOOUT)

OSD Menu

40

Marker Settings Thismenuisusedtoconfigurevariousmarkers.Thefactorydefaultsdifferaccordingtothe[MarkerPreset]setting ( 45).

Sub Menu Setting Options (Factory default)

MarkerPreset Marker 1to5 Off

Customizesmarkerswhichareassignedtomarkers1to5.

AspectMarker1 [AspectMarker]displaysarangeinaccordancewiththespecifiedaspectratio.

Enable On,Off SwitchestheaspectmarkerOn,Off.

Mask Black Half Off

Switchesthemaskcolor.Maskistheblankingareaoutsidetherangeof themarker.

[Black]:

[Half](50%gray):

[Off]:Turnsmaskoff.

AspectRatio 16:9,15:9,14:9,13:9, 4:3,2.39:1,2.35:1, 1.896:1,1.85:1,1.66:1, Variable

WhenVariableis selected

1.00:1to3.00:1

Setstheaspectratiooftheaspectmarker. Theaspectratiocanbeenteredasanumericvaluewhenyouselect [Variable](0.01:1increments).Thegrayedoutsliderbecomesactiveand canbeusedtosettheaspectratio.

Line On,Off When[Mask] [Black]or[Half] SwitcheslinesonmaskOn,Off.

LineWidth Thick Normal Thin

Setsthethicknessoftheaspectmarkerline.

OSD Menu

41

Sub Menu Setting Options (Factory default)

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecoloroftheaspectmarkerline.

LineBrightness High,Low,Half Setsthebrightnessoftheaspectmarkerline.

SafetyZoneMarker1,21 Therearetwotypesof[SafetyZoneMarker]:1and2,whichsharethesamesettings.Asafetyzone markerisusedtosetthesafezoneoftheimage(actualdisplayedarea)tochecktheimage.

Enable On,Off SwitchesthesafetyzonemarkerOn,Off.

AspectRatio 16:9,15:9,14:9,13:9, 4:3,2.39:1,2.35:1, 1.896:1,1.85:1,1.66:1, Variable

WhenVariableis selected

1.00:1to3.00:1

Setstheaspectratioofthesafetyzonemarker.

[Variable]:Theaspectratiocanbeenteredasanumericvalue(0.01:1 increments).Thegrayedoutsliderbecomesactiveandcanbeused tosettheaspectratio.

When[AreaSize]issetto[Variable(dot)],youcannotselect[AspectRatio].

AreaSize 80%,85%,88%,90%, 93%,95%,Variable(%), Variable(dot)

Setsthesafetyzonemarkerareasize.

[Variable(%)]:Thegrayedout[Rate(%)]becomesactive. [Variable(dot)]:Thegrayedout[Width(dot)]and[Height(dot)]become

active.

Rate(%) 50to100 When[AreaSize] [Variable(%)] Movetheslidertosetthedisplayedmarkerareasizewithoutchangingthe aspectratioin1%increments.

Width(dot) 20to3840 When[AreaSize] [Variable(dot)] Movetheslidertosettheareawidthin2dotincrement.

Height(dot) 20to2160 When[AreaSize] [Variable(dot)] Movetheslidertosettheareaheightin2dotincrement.

OSD Menu

42

Sub Menu Setting Options (Factory default)

Shape Box Box(Mask) Brackets Enclosure

Setstheareashapeofthesafetyzonemarker.

[Box]:

[Box(Mask)]:

[Brackets]:

[Enclosure]:

LineWidth Thick Normal Thin

Setsthewidthofthesafetyzonemarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthesafetyzonemarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthesafetyzonemarkerline.

HPosition -1920to1920 Adjuststhemarkerhorizontalpositionwiththesetaspectandsize(in incrementsof2).

VPosition -1080to1080 Adjuststhemarkerverticalpositionwiththesetaspectandsize(in incrementsof2).

OSD Menu

43

Sub Menu Setting Options (Factory default)

AreaMarker1,21 Therearetwotypesof[AreaMarker]:1and2,whichsharethesamesettings.[AreaMarker]isused tocheckaspecificareausingarectangularbox.

Enable On,Off SwitchestheareamarkerOn,Off.

HPosition 0to3830 Setsthestartposition(x-coordinate)todrawtherectangle(inincrements of2).

VPosition 0to2150 Setsthestartposition(y-coordinate)todrawtherectangle(inincrements of2).

Width(dot) 10to3840 Setsthewidthoftherectangle(inincrementsof2).

Height(dot) 10to2160 Setstheheightoftherectangle(inincrementsof2).

Mask Black Half Off

Switchesthemaskcolor(inthemarker).

Line On,Off When[Mask] [Black]or[Half] TurnsOn/Offtheoutlinesoftherectangularbox.

LineWidth Thick Normal Thin

When[Mask] [Off]or[Line] [On] Setsthewidthoftheareamarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

When[Mask] [Off]or[Line] [On] Setsthecoloroftheareamarkerline.

LineBrightness High,Low,Half When[Mask] [Off]or[Line] [On] Setsthebrightnessoftheareamarkerline.

OSD Menu

44

Sub Menu Setting Options (Factory default)

CenterMarker2 [CenterMarker]showsthecenteroftheimage.

Enable On,Off SwitchesthecentermarkerOn,Off.

Size Large Middle Small

Setsthesizeofthecentermarker.

LineWidth Thick Normal Thin

Setsthewidthofthecentermarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthecentermarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthecentermarkerline.

GridMarker3 [GridMarker]ismarkerusedtocheckthehorizontalandverticalposition.

When[Distance] [***dots] When[Distance] [***%(UHD)]

Enable On,Off SwitchesthegridmarkerOn,Off.

Distance 160dots 240dots 320dots 80%(UHD) 83%(UHD) 85%(UHD) 88%(UHD) 90%(UHD) 93%(UHD) 95%(UHD)

Setsthehorizontalandverticallinedistance.

[160/240/320dots]:Setsthelinedistancetotheselectednumberofdots. [80%(UHD)to95%(UHD)]:Thisindicatesthepercentageofthedisplay

areaofthe3840x2160area.Theareaoftheselectedratioisindicated bythemarker.

LineWidth Thick Normal Thin

Setsthewidthofthegridmarkerline.

LineColor White,Red,Green, Blue,Yellow,Cyan, Magenta,Gray

Setsthecolorofthegridmarkerline.

LineBrightness High,Low,Half Setsthebrightnessofthegridmarkerline.

OSD Menu

45

1 Themarkerisnotdisplayedinthefollowingcases: - Whenthereisnosignal,unsupportedsignal,orachannelwith[InputConfiguration]notsetisselected

- Whenanenlargedimageisdisplayed

- Duringtheexecutionof[PlaybackFile]under[ScreenCapture]

- Whena[TestPattern]isdisplayed

- Whenusing[MultiView(Quad)],[MultiView(Dual)],or[SingleInputDualView] 2 Themarkerisnotdisplayedinthefollowingcases:

- Whenanenlargedimageisdisplayed

- Whenusing[MultiView(Quad)],[MultiView(Dual)],or[SingleInputDualView] 3 Themarkerisnotdisplayedinthefollowingcases:

- Whenanenlargedimageisdisplayed

Details of the factory default settings for marker preset

Item Factory default

Marker 1 to 4 Marker 5

AspectMarker Enable Off On

Mask Off Half

AspectRatio 16:9 16:9

WhenVariableisselected 1.78:1 1.78:1

Line On On

LineWidth Normal Normal

LineColor White Gray

LineBrightness Low Half

SafetyZoneMarker1,2 Enable Off On

AspectRatio 16:9 16:9

WhenVariableisselected 1.78:1 1.78:1

AreaSize 80% Variable(dot)

Rate(%) 80 80

Width(dot) 3072 2200(400*)

Height(dot) 1728 100(400*)

Shape Box Box(Mask)

LineWidth Normal Normal

LineColor White Gray

LineBrightness Low Half

HPosition 0 0(1650*)

VPosition 0 -850(-800*)

OSD Menu

46

Item Factory default

Marker 1 to 4 Marker 5

AreaMarker1,2 Enable Off On

HPosition 240 240(3500**)

VPosition 120 120(60**)

Width(dot) 240 240

Height(dot) 120 120(240**)

Mask Off Half

Line On On

LineWidth Normal Normal

LineColor White Gray

LineBrightness Low Half

CenterMarker Enable Off On

Size Middle Small

LineWidth Normal Normal

LineColor White White

LineBrightness Low Half

GridMarker Enable Off On

Distance 160dots 85%(UHD)

LineWidth Normal Normal

LineColor White White

LineBrightness Low Half

*WhenSafetyZoneMarker2isused

**WhenAreaMarker2isused

OSD Menu

47

Function Settings Thismenuisusedtosettheimagesignalinformationdisplayandthecinemacameralinkfunction.

Sub Menu Setting Options (Bold: factory default)

TimeCode1 Displaythetimecodesuperimposedonthesignal.

VITC 01:23:45.05

Enable On,Off SwitchesthetimecodedisplayOn,Off.

Type VITC LTC

Selectsthetype.

ThissettingbecomesinvalidwhenHDMIsignalisinputandisfixedto[VITC].

VITCFieldFlag On,Off SelectwhetherornottousethefieldflagwhentheVITCtimecodeis displayed.

Size Large Small

Selectsthesize.

Position TopLeft TopRight Bottom Left BottomRight

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display. When[TopLeft]or[TopRight]isselected: Whensetto[AudioLevelMeter] [Enable] [On],thetimecodewillnotbe displayed.

HOffset 0to1332(0) Adjuststhedisplaypositionofthetimecode.

When[MultiView(Dual)]isdisplayed,the[HOffset]settingisinvalid.

TypeStringDisplay On,Off SetsdisplayofVITC/LTCstrings.

Brightness Normal,Half SetstheBrightnessofthestrings.

AudioLevelMeter1 Configuresvarioussettingsfortheaudiolevelmeter.Displaystheaudioleveloftheselectedchannel number.

Enable On,Off SwitchestheaudiolevelmeterOn,Off.

ChannelNumber (SDI)

2CH 4CH 6CH 8CH 16CH

SetsthenumberofchannelsdisplayedwhenSDIsignalisinput.

ChannelNumber (HDMI)

2CH 4CH 6CH 8CH

SetsthenumberofchannelsdisplayedwhenHDMIsignalisinput.

OSD Menu

48

Sub Menu Setting Options (Bold: factory default)

ChannelOrder Normal Grouping

Setstheorderofchannels.

[Normal]:Odd-numberedchannelsareshownontheleftside,even- numberedchannelsontherightside([1,3,5,7]etc.)ontheleft,([2,4, 6,8]etc.)ontheright.

[Grouping]:Channelsareshowninsequenceontheleftandrightsides([1, 2,3,4]etc.)ontheleft,([5,6,7,8]etc.)ontheright.

Size Large Small

Setsthesizeofthedisplay.

In[SingleInputDualView]displaywhen[ChannelNumber(SDI)]issetto[16CH],

thissettingisinvalid.

Position Normal Left

Selectsthedisplayposition.

[Normal]:Displaystheaudiolevelmeteronbothends. [Left]:Indicationontherightsideisdisplayedtowardthecenterofthe

screen.Thispreventstheindicationfromoverlappingwiththebanner.

PeakHold On,Off Onesecondofaudiosignalatthepeakiskept.

ReferenceLevel -40to0(-20) Setsthereferencelevel.

Brightness Normal Low Half

Setsbrightnessfortheaudiolevelmeter.

WaveFormMonitor1 Configuresvarioussettingsforthewaveformmonitor.Onthewaveformmonitor,thehorizontalaxis showsthehorizontalresolutionofthevideoandtheverticallineshowsthesignallevel.Totherightof thewaveformmonitor,[ColorRange]and[HDRRange]information(verticalline)isdisplayed.

Signallevel

Horizontalresolutionofvideo

Enable On,Off SwitchesthewaveformmonitorOn,Off.

SelectSignal Y,Cb,Cr,R,G,B Setsthewaveformtobedisplayed.

Whenoneof[R],[G]or[B]isselected,thenon-constantvalueisdisplayedeven if[2020ConstantLuminance]issetto[Constant].

OSD Menu

49

Sub Menu Setting Options (Bold: factory default)

Scale Automatic IRE SMPTEST2084(PQ) HybridLog-Gamma CanonLog CanonLog2 CanonLog3 S-Log2 S-Log3 ARRI(Rec2100-PQ- 1K-100)

ARRI(Rec2100-HLG- 1K-200)

Setsthescaleofthewaveformmonitor.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color Range]settings.

When[SMPTEST2084(PQ)],[CanonLog],[CanonLog2],or[CanonLog3]is set(including[Automatic]): When[Gamma/EOTF] [SMPTEST2084(PQ)],theitemisdisplayedin accordancewiththe[ColorRange]settings([SDIFull(4-1019)]issetto[Full]).

ReferenceLine 4to1023 Aguideisdisplayedatthespecifiedposition.[ReferenceLine]isnot displayedwhen[1023]isselected.

ReferenceLevel Automatic Manual

Setstherangeofthereferencelevel.Tintstheoutsideoftherangeofthe referencelevel. Inthecaseof[Gamma/EOTF]correspondingtotheHDRrange,partsthat exceedtheHDRrangearetinted. When[ColorRange] [Limited],outsidethelimitedrangeistinted.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]and[Color Range]settings.

ReferenceLevel High

468to1023 Setsthereferencedisplaylevel(high).[ReferenceLevelHigh]isnot displayedwhen[1023]isselected.

ReferenceLevel Low

0to468 Setsthereferencedisplaylevel(low).[ReferenceLevelLow]isnot displayedwhen[0]isselected.

Color Setsthesignalstobedisplayedandthecolorofsignalsexceedingthereferencelevel.

Y White Red Green Blue Yellow Cyan Magenta

[Y],[Cb],[Cr],[R],[G],[B]:Selectsthecoloroftheselectedsignal. Defaultvalueofeachsignalisshownbelow. Y(White),Cb(White),Cr(White),R(Red),G(Green),B(Blue)

[ReferenceLevelHigh],[ReferenceLevelLow]:Selectsthecolorofthe signaloftheselectedreferencelevel. Defaultvalueofeachreferencelevelisshownbelow. ReferenceLevelHigh(Magenta),ReferenceLevelLow(Cyan)

Cb

Cr

R

G

B

ReferenceLevel High

ReferenceLevel Low

Position Bottom Left BottomRight

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display.

Size Large,Middle,Small Setsthesizeofthedisplay.

OSD Menu

50

Sub Menu Setting Options (Bold: factory default)

VectorScope1 Configuresvarioussettingsforthevectorscope.Vectorscopedisplaystheintensityofcolorsignals andhuewiththehorizontalaxisshowingthecolordifferencesignalCbandtheverticallineshowing Cr.

Red

Green

Yellow Blue

Cyan

Magenta

(Cb,Cr)=(255,255)

(Cb,Cr)=(0,0)

Cr

Cb

Enable On,Off SwitchesthevectorscopeOn,Off.

Target 75% 100% 75%+100%

Setsthetarget.

Position BottomLeft Bottom Right

Selectsthedisplayposition.

Thissettingbecomesinvalidinthe[MultiView(Dual)]display.

Size Large,Middle,Small Setsthesizeofthedisplay.

PixelValueCheck1 MeasuresanddisplaystheRGBvalueofthespecifiedpixel(cursor)position.When[Gamma/EOTF] issetto[SMPTEST2084(PQ)]or[HybridLog-Gamma],thebrightnessvalueisalsodisplayed.

Thenon-constantvalueisdisplayedevenif[2020ConstantLuminance]issetto[Constant].

Enable On,Off SwitchesthepixelvaluecheckOn,Off.

HPosition 1to4096(960) Setsthepixelposition(horizontal).

VPosition 1to2160(540) Setsthepixelposition(vertical).

ResetPosition Normal Around Peak

Luminance

SetsoperationwhentheRESETbuttonispressed.

[Normal]:Resetsthevaluetothedefaultvalue. [AroundPeakLuminance]:Movesclosertotheareaofpeakluminance

insidethedisplayimage.

ChromaticityDiagram On,Off SwitchesthechromaticitydiagramOn,Off.

[On]:Displaysthechromaticitydiagram.Thechromaticitydiagramis displayedonlywhen[ColorGamut]and[Gamma/EOTF]aresetas shownbelow.

[ColorGamut]:ITU-RBT.2020,ITU-RBT.709 [Gamma/EOTF]:1.0,2.2,2.35,2.4,2.6,SMPTEST2084(PQ), HybridLog-Gamma

OSD Menu

51

Sub Menu Setting Options (Bold: factory default)

TestPattern White(1023) White(940) Gray Black(64) Black(0) Ramp ColorBars ColorBars(PQFull) ColorBars(PQLimited) ColorBars(HLG) PLUGE PLUGE(PQ/HLG) Off

Setsthetestpatternbuiltintothemainunit.

Ifthepoweristurnedoffonceandthenbackon,thetestpatternwillnotbe displayed.

Thetestpatternwillbeerasedinthefollowingcases: - WhenachannelischangedusingtheCHbutton,Fbuttonassignedfor

ChannelUP/ChannelDOWN,or[SelectChannel]under[ChannelSettings]

- Whenchanging[InputConfiguration]or[SelectInputSignal]under[Channel

Settings]

- When[ResetAllSettings]isexecuted

SignalMonitoring Monitorstheinputsignalstatus.

[SignalMonitoring]cannotbeusedinthefollowingcases: - When[SingleInputDualView]isdisplayed

- Whenanenlargedimageisdisplayed

- Duringdisplayofthetestpattern

- Duringexecutionof[PlaybackFile]under[ScreenCapture]

Whenanerrorisdisplayed,[InMonitorDisplay]willnotbeshown. Thepositiontheerrorisdisplayedcanbeadjustedwith[InMonitorDisplay] [Position].

Control On,Off Setswhether[SignalMonitoring]isusedornot.

ErrorHold On(Notimeout) On(5sec.) Off

Setsthelengthoftimefordisplayingerrors,whentheyaredetected.

[On(Notimeout)]:Errorscontinuetobedisplayed.Tohidethedisplayed error,presstheRESETbuttonwhenclosingtheOSDmenu.

[On(5sec.)]:Thedisplayederrorwilldisappear5secondsaftertheinitial detection.

[Off]:Onlydisplayserrorsduringtheperiodwhentheyaredetected.The displayederrormessagewilldisappearoncetheerrorends.

NoSignal/Unsupported Signal

On,Off Displaysanerrorwhenthereis[NoSignal]or[UnsupportedSignal].

2SILinkOrder On,Off Displaysanerrorwhenthecablesinsertedintotheinputterminalsarein thewrongorderwhenusingsignalsinputvia[2SampleInterleave].

SDICRCError On,Off DisplaysanerrorwhenanincorrectSDIsignalisdetected(CRCerror).

8K2SIFormat On,Off MonitorstheinputsignalstatusforthefourterminalsusingtheSDIsignal when[ChannelSettings] [SelectInputSignal]issetto[Automatic].

Export ExportstheerrorhistorytoUSBmemory.Thefilenameissignal_error_xxx.txt(xxxisanumber).

ErrorLog Displayserrorhistory.

OSD Menu

52

Sub Menu Setting Options (Bold: factory default)

ScreenCapture Capturesthescreen.

Capture Capturesthescreen.Thedataissavedunderthename"YYYYMMDD_ hhmmss.bmp"intherootfolderoftheUSBmemory.

FrameHold On,Off Pausesthevideo.

CaptureSource All Video

Selectsthesourcestocapture.

[All]:Everythingiscapturedincludingvideoassistancefunctionssuchas markersandwaveformmonitoraswellasOSDmenu.

[Video]:Onlyvideosignalsarecaptured.

CreateHDR/SDR CompareFile

On,Off CreatesafilethatletsyoucomparethebrightnessofHDRandSDR imagesonacomputer.Whensaving,[_pc]isappendedtothefilename.

PlaybackFile SelectFile Execute

Playsbackcapturedimages.

[SelectFile]:Selectsafile. [Execute]:Playsbacktheimage.

WhenplayingbackcapturedimagesonothervideodisplayorPC,colormaynot beplayedbackprecisely.

Filescreatedusing[CreateHDR/SDRCompareFile]willnotbedisplayedinthe [SelectFile]screen.

FinishPlaybackFile Finishesplayback.

CameraLink SetsthefunctionstolinkwithCinemaEOScamerasandARRI/Panasoniccinemacameras.

AutomaticAdjustment (CINEMAEOS)

When[PictureMode] [CINEMAEOSSYSTEM],[InputConfiguration] [12-3G/HD-SDI] Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTablewhen[ColorGamut/ Gamma/EOTF],[ColorTemperature],and[ColorRange]areallsetto[On]. ( 54)

ColorGamut/ Gamma/EOTF

On,Off Theimagequalityofthedisplaycorrespondstothecamera'ssettings.

ColorTemperature On,Off

DisplayColor Gamut

ITU-RBT.709 ITU-R BT.2020 DCI-P3

Setsthecolorgamutshownonthedisplaywhenthecamera's[Color Space]issetto[CinemaGamut]or[DCI-P3+].

AutomaticAdjustment (ARRI)

When[PictureMode] [User6]to[User7],[InputConfiguration] [12-3G/HD-SDI] Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTable.( 55)

UserLUT Rec2100-PQ-1K-100 Rec2100-HLG-1K-200 3D-LUT1-8

When[AutomaticAdjustment(ARRI)] [On] Setsthecolorgamutandgamma/EOTFshowninthedisplay.

OSD Menu

53

Sub Menu Setting Options (Bold: factory default)

AutomaticAdjustment (VARICAM)

When[PictureMode] [User6]to[User7],[InputConfiguration] [12-3G/HD-SDI] Setswhetherornottolinktothecamera'simagequalitysetting.

On,Off RefertotheSettingValuesCorrespondenceTable.( 55)

UserLUT V-Log to V-709 3D-LUT1-8

When[AutomaticAdjustment(VARICAM)] [On] Setsthecolorgamutandgamma/EOTFshowninthedisplay.

Anamorphic On,Off WhenaCanoncameraisconnected,displaysinaccordancewiththe settingswhenanamorphiclensdisplaysettingsareincludedinthecamera metadata.

CameraInformation Automatic On Off

Setsconditionstodisplaycamerainformation.

[Automatic]:Camerainformationisdisplayedfor4secondswhenthe informationhaschanged.

[On]:Camerainformationisalwaysdisplayed. [Off]:Camerainformationisnotdisplayed.

NotdisplayedwhenMultiView(Quad)/MultiView(Dual).

1 Theinformationdisplayfunctionsthatcanbedisplayedvarydependingonthevideodisplay'ssettingsortheinputsignalstatus.

Time

Code

Audio Level

Meter

Wave Form

Monitor

Vector

Scope

Pixel Value

Check

When[FrameHold]is[On] = = =

Duringexecutionof[PlaybackFile]under[ScreenCapture]

When[TestPattern]isdisplayed = = =

When[MultiView(Quad)]isdisplayed

When[MultiView(Dual)]isdisplayed

When[SingleInputDualView]isdisplayed = = = =

When[PictureFunctionSettings] [CompareView] [Enable]isset

to[On],[SingleInputDualView]issetto[Off]andalsotheresolutionis

4096x2160or3840x2160

= =

Whileimagesotherthanresolution4096x2160/3840x2160/2048x1080

/1920x1080aredisplayed,orwhenthereisnosignalortheinputsignalis

unsupported

= =

=:Canview:Cannotview

OSD Menu

54

Parameter of Cinema EOS cameras and Canon displays

CinemaEOScameras Canondisplay

ColorSpace ColorGamut Color Temperature

BT.709 ITU-RBT.709 D65

BT.2020 ITU-RBT.2020 D65

DCI-P3 DCI-P3 DCI-P3

CinemaGamut CinemaGamutto709 D65

CinemaGamutto2020 D65

CinemaGamuttoDCI DCI-P3

CinemaEOScameras Canondisplay

Gamma/EOTF Gamma/EOTF HDRRange

CanonLog CanonLog(HDR)

CanonLog2 CanonLog2(HDR)

CanonLog3 CanonLog3(HDR)

ST2084,PQ SMPTEST2084(PQ) 1000

Normal(BT.709) 2.2

EOSStd.

WideDR 2.4

DCI-P3 2.6

OSD Menu

55

Parameter of ARRI Cinema camera and Canon displays

ARRICinemacamera Canondisplay

ColorSpace DisplayColor Gamut

CDL/UserLUT ColorGamut Gamma/EOTF HDRRange

REC709 ITU-RBT.709 2.2

REC2020 ITU-RBT.2020 2.2

WideGamutLogC Rec2100-PQ- 1K-100

ARRI(Rec2100- PQ-1K-100)

ITU-RBT.2020 SMPTEST2084 (PQ)

1000

Rec2100-HLG- 1K-200

ARRI(Rec2100- HLG-1K-200)

ITU-RBT.2020 Hybrid Log-Gamma

3D-LUT1-8 UserLUT1-8

Parameter of Panasonic Cinema camera and Canon displays

PanasonicCinema camera

Canondisplay

ColorSpace DisplayColor Gamut

CDL/UserLUT ColorGamut Gamma/EOTF HDRRange

V-709 ITU-RBT.709 2.2

V-Log V-LogtoV-709 VARICAM(V-Log toV-709)

ITU-RBT.709 2.2

3D-LUT1-8 UserLUT1-8

OSD Menu

56

Picture Function Settings Thismenuisusedtosetvideoassistancefunctions,forexample.

Sub Menu Setting Options (Bold: factory default)

Peaking1 Theoutlineisdisplayedinacolor,usedtocheckthefocus.Customizespeakingswhichareassigned toPeaking1orPeaking2.

Enable Peaking1 Peaking2 Off

SwitchesthepeakingdisplaymodeandalsosetspeakingtoOff.

Monochrome When[Peaking1] On,Off When[Peaking2] On,Off

Displaysvideoinmonochrome.

Frequency When[Peaking1] Low,Middle,High When[Peaking2] Low,Middle,High

Setsthecentralfrequencyofcontourenhancementsignals.

Range -3~3(0) Setsthewidthoftherangetobecolored.

Color White,Red,Green, Blue,Yellow,Cyan, Magenta

Setsthecolortobeused.

FalseColor1 Displaysdifferentcolorsforthevideo'sbrightnesslevelstomakeiteasiertochecktheexposureand brightnessdistribution.Customizesthefalsecolorandsetsittofalsecolor1orfalsecolor2.

Enable FalseColor1 FalseColor2 Off

SwitchesbetweenFalseColordisplaymodeandnon-display.

Type Automatic IRE

Setsthetintcolordisplaymethod.

[Automatic]:Setsinaccordancewiththe[Gamma/EOTF]settings.

When[IRE]isselected,[Range-SDR]and[Range-HDR]settingsbecome invalid.

Range-SDR When[FalseColor1] On,Off When[FalseColor2] On,Off

SetswhethertotinttheSDRarea.

When[On],setsthesizeoftheareatobetinted.(10to100:incrementsof 5,100to200:incrementsof10) Monochrome/Brown:10to190(40) Brown/Monochrome:20to200(85)

OSD Menu

57

Sub Menu Setting Options (Bold: factory default)

Range-HDR When[FalseColor1] Automatic Automatic(OverRange) Manual When[FalseColor2] Automatic Automatic(OverRange) Manual

Setsthetintcolorrange.

[Automatic]:Setstheupperlimitautomaticallyinaccordancewiththe [Gamma/EOTF]settings.

When[Manual]or[Automatic(OverRange)]isselected,setsthesizeof theareatobecolored.

RangeCheck1 Displaysvideoinmonochrome,withtheareaswherethesetrangeisexceededareshowntinted. CustomizesRangeCheckandsetsittoRangeCheck1,2.

Enable RangeCheck1 RangeCheck2 Off

SwitchestheRangeCheckdisplaymodeOn,Off.

OverRange Automatic,Manual Displaysvideoinmonochrome,withtheareaswherethesetrangeis exceededareshowntinted.

[Automatic]:Outsidetherangeofthe[ColorRange]settingsistinted. When[Gamma/EOTF] [SMPTEST2084(PQ)]or[HybridLog- Gamma],outsidetherangeofthe[ColorRange]and[HDRRange] settingsistinted.

[Manual]:Onlyareasthatexceedtherangesetat[SMPTEST2084(PQ)] or[HybridLog-Gamma]aretinted.

SMPTEST2084 (PQ)

100to10000(1000) When[OverRange] [Manual] Setsthetintcolorrange.(100to1000:10increments, 1000to4000:100increments,4000to10000:1000increments)

HybridLog-Gamma 100to1000(1000) When[OverRange] [Manual] Setsthetintcolorrange.(10increments)

Other 512to1023(940) When[OverRange] [Manual] Setsthetintcolorrange.(1increments)

2020OutsideofGamut View1

When[PictureMode]or[ColorGamut] [ITU-RBT.2020] Displaysvideoinmonochrome,withtheareaswherethecolorgamutexceedstheselectedcolor gamutshowninred.

Enable On,Off SwitchesbetweenOnandOfffor[2020OutsideofGamutView].

ColorGamut ITU-R BT.709 Native

Setsthe[ColorGamut]tobesetasoutofcolorgamut.

Range 0to512(0) Setstherangewhentintingdarkareas.(1increments) 0:Tintsalldarkareas. 512:Darkareasatthesetvaluesorlessarenottinted.

OSD Menu

58

Sub Menu Setting Options (Bold: factory default)

Monochrome2 On, Off Video is displayed in monochrome.

Blue Only2 On, Off Cuts red and green signals, and displays only blue signals in monochrome.

[Blue Only] cannot be set when [CDL/User LUT] is a setting other than [CDL 1-8] or [Off].

Red Off2 On, Off Video is displayed with red signals cut.

Green Off2 On, Off Video is displayed with green signals cut.

Blue Off2 On, Off Video is displayed with blue signals cut.

Compare View1 Images having different image quality settings are displayed on the left and right screens for comparison. (When [Picture Mode] for left and right screens is the same)

When a signal with a resolution of 2K or smaller is displayed on a single screen, changes to [Single Input Dual View].

This cannot be set when [2020 Constant Luminance] is set to [Constant] and the [Format] signal method is ICtCp or XYZ.

Enable On, Off Sets Comparison mode On or Off.

Type Automatic HDR/SDR CDL/User LUT

Sets the type of the image to compare.

[Automatic]: [HDR/SDR] when [Adjustment] [CDL/User LUT] is [Off], otherwise set at [CDL/User LUT].

[HDR/SDR]: HDR and SDR images are displayed. [CDL/User LUT]: The image on which [CDL] or [User LUT] is applied is

displayed only in the left screen.

Not settable in the following cases: - When [Color Gamut] is set to [Cinema Gamut to XXX] or [S-GamutXXX]

- When [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or [Canon Log 3]

HDR/SDR Convert Method

2020 HDR to 709 SDR 2020 HDR to 2020 SDR User LUT 1-User LUT 8 Off

When [Type] is set to [HDR/SDR] or [Automatic ([HDR/SDR])] Sets the display method of the screen set to SDR.

[2020 HDR to 709 SDR], [2020 HDR to 2020 SDR]: Setting differs according to the [Gamma/EOTF] settings.

[SMPTE ST 2084 (PQ)]: The [User LUT] corresponding to each setting is applied.

[Hybrid Log-Gamma]: The [User LUT] corresponding to each setting is applied.

[Canon Log(HDR)], [Canon Log 2(HDR)], [Canon Log 3(HDR)]: [Canon Log], [Canon Log 2] or [Canon Log 3] is applied.

[S-Log2 (HDR)], [S-Log3 (HDR)]: [HDR Range] setting [100] is set. [User LUT 1-8]: The specified [User LUT] is applied. After applying [User

LUT] the adjustment inside the display fixes [Color Gamut] at [ITU-R BT.709] and [Gamma/EOTF] at [2.4].

[Off]: Only brightness is lowered.

OSD Menu

59

Sub Menu Setting Options (Bold: factory default)

Luminance(SDR) 50.0to200.0(100.0) When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetstheluminanceoftheSDRside.

ColorTemperature (SDR)

Normal, D93,D65, D65Custom, DCI-P3

When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetstheSDRcolortemperature.

Gain(SDR) -15to15(0) When[Type]issetto[HDR/SDR]or[Automatic([HDR/SDR])] SetstheSDRgain.

UserLUTTarget1 UserLUT1to UserLUT8,Off

When[Type]issetto[CDL/UserLUT]or[Automatic([UserLUT])] Setsthecomparisontarget.

1 [Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],[CompareView]:Operationinaccordancewiththeconfigurationofthe

videodisplay

Peaking False Color Range Check 2020 Outside of

Gamut View Compare View

When[Monochrome],[BlueOnly],[RedOff],[Green

Off],or[BlueOff] [On]

Duringexecutionof[PlaybackFile]under[Screen

Capture] = = =

=:Canbedisplayed/set.:Cannotbedisplayed/set.

[Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],and[CompareView]cannotbedisplayedsimultaneously. 2 Whenthepoweristurnedoffandon,becomes[Off].

Cannotbesetwhen[Peaking],[FalseColor],[RangeCheck],[2020OutsideofGamutView],or[CompareView] [Enable] [On](otherthan

[Off]).

OSD Menu

60

Network/IMD Settings

Sub Menu Setting Options (Bold: factory default)

LAN Configuresvideodisplay'snetworksettings.

Cannotbesetwhen[PoweronSetting]is[User1]to[User3].

ConfigureanIP Address

Automatic Manual

[Automatic]:ConfiguresanIPaddressautomaticallywithDHCP/AutoIP. [Manual]:ConfigureanIPaddressandsubnetmaskmanually.

Display 192.168.0.1

SubnetMask 255.255.255.0

InMonitorDisplay ThevideodisplaysupportsTelevisionSystemsLtd.sTSLUMDProtocolVer.5.0.Youcanoperate thevideodisplayusinganexternaldeviceconnectedtotheLANterminalanddisplaycharactersand tallylightsonthescreen.Youcaninputanycharactersyoulikedirectlyfromthisvideodisplay.( 18)

Control TSL Ver. 5.00 Manual Off

Setswhetherornottoreceivethecontrolsignalfromtheconnected device.

[Manual]:Selecttoinputthecharactersonthisvideodisplay.Doesnot receiveacontrolsignalfromtheconnecteddevice.

Position Top Bottom

Thissetswhetherthecharactersandtallylightswillbedisplayedatthe toporthebottom.

ManualDisplayType Automatic Single DualA,B,DualC,D QuadA,B,C,D

[Automatic]:ChangesdisplayinaccordancewiththeInputConfiguration. [Single]:Single-screendisplay. [DualA,B],[DualC,D]:Dual-screendisplay. [QuadA,B,C,D]:Quadruple-screendisplay.

When[FunctionSettings] [SignalMonitoring] [Control]issetto[On]then [ManualDisplayType]isfixedto[Automatic].

ManualString (Single) (Dual/QuadA) (Dual/QuadB) (Dual/QuadC) (Dual/QuadD) (SingleDualL) (SingleDualR)

When[Control] [Manual] Setsthecharacterstodisplayfortheselected[ManualString].Youcan inputupto16alphanumericcharacters.

OSD Menu

61

System Settings Thismenuisusedtoconfiguresystemsettingsrelatedtothevideodisplay.

Sub Menu Setting Options (Bold: factory default)

Function/ChannelButton SetsthefunctionorchanneltoassigntotheFbuttonsorCHbutton.

FunctionButton SetsthefunctiontoassigntotheFbuttonsofthemainunit( 13).SelectanFbuttonandassigna functionfromthefollowinglist( 66).FunctionButton(ALT)

ChannelButton SetsthechanneltoassigntotheCHbuttononthedisplay.

CH1 CH1toCH20(CH1) SelectaCHbuttonandregisterachannelnumber.Alistofsettingsunder themenu[ChannelSettings]( 34)isdisplayed.CH2 CH1toCH20(CH2)

CH3 CH1toCH20(CH3)

GPI Youcanoperatethevideodisplayusinganexternalcontrollersuchasaswitcherthathasbeen connectedtotheGPIterminal.Operatesbyconnecting(shorting)theGND(No.8Pin)toNo.s1to7.

Thisfunctionwillnotworkcorrectlyinthefollowingcases. - Ifthesamefunctionisassignedtomultiplepins.

- Ifthechangestothismenuitemsettingandthepinassignmentsweremadewhenthepinswereshorted

Type Level, ShortEdge

[Level]:Operateswhileshorted. [ShortEdge]:Switchesbetweenoperate/donotoperateforeach

short.

Pin1~Pin7 AssignsfunctionsineachGPIpin.( 17) Functionsthatcanberegistered: ITU-RBT.709,ITU-RBT.2020,AdobeRGB,DCI-P3,User1(2020PQ),User2(2020HLG), User3(DCIPQ),User4(DCIPQD65),User5~User9,CINEMAEOSSYSTEM, ACESproxy(ver.1.0.1),CH1toCH5,Marker1toMarker3,TimeCode,AudioLevelMeter, WaveFormMonitor,VectorScope,FalseColor1/2,Monochrome,BlueOnly,RedOff,GreenOff, BlueOff,CompareView,MENU,TallyGreen,TallyRed,PowerOn,(Notset)

About[Tally] Atallyappearsatthetopofthescreen.Combining[TallyGreen]and[TallyRed]makes[TallyAmber].

[PowerOn]:Canonlyberegisteredto[Pin7].

Language English

SetsthelanguageoftheOSDmenuandmessages.

Date/Time Setstheyear/month/date/hour/minute.

OSD Menu

62

Sub Menu Setting Options (Bold: factory default)

DisplayName Setsthenameofthemainunit.Youcaninputupto16alphanumericcharacters.

OSDSettings

Banner Setsthebannerdisplaymethodforthechannelname,signalinformation,andstatusofthevideo display.

AutomaticDisplay On,Off Automaticallydisplaysthebannerwhentheinputsignalorpicturemode arechanged.

PictureMode On,Off Setswhethertodisplay[PictureMode].

TimeOut On,Off Thebannerautomaticallydisappears.

FunctionButtonGuide On,Off [On]:WhenallOSDarehidden,youcandisplaythelistoffunctions assignedtoanFbuttononthevideodisplaybyoperatingthejogdial.

[Off]:FunctionButtonGuideisnotdisplayed.

OSDBrightness Automatic (High - Middle) Automatic (High-Low) High Middle Low

SetsthebrightnessoftheOSD.

Thebrightnessisautomaticallyadjustedtosuittheluminancewhen [Automatic]isselected.Youcanchoosebetween[High-Low]and [High-Middle]adjustmentranges.

ProtectSettings Locksthesettingssotheycannotbechanged.WhenyoupresstheMENUbutton,[Signal/System Information]appears,butotheroperationsaregrayedoutbecausetheyarelocked.

Password Setapasswordtoprotectsettings.Useafour-digitnumber(0000to 9999).Theinitialpasswordisblank.

ProtectTarget YoucanremovePictureModeandSelectChannelfromtheitemstobe protected.

PictureMode On,Off Whensetto[On],protectsthe[PictureMode]settings.

SelectChannel On,Off Whensetto[On],protectsthe[SelectChannel]settings.

FunctionSettings On,Off Whensetto[On],protectsthe[FunctionSettings]and[PictureFunction Settings]settings.

Protect Select[OK]toprotect.Whenapasswordhasbeenset,enterthe passwordandselect[OK].

UnlockingProtectSettings

Movetheselectionframeto[Protect]andpresstheJogdialfor approximately3seconds.Whenapasswordhasbeenset,enterthe passwordandselect[OK].

OSD Menu

63

Sub Menu Setting Options (Bold: factory default)

PowerSave 120min.,60min., 30 min.,Off

Automatically turnsoffvideodisplay'spowersupplywhen there isno videosignalinput. Themessage[NoSignal,TurnoffpowerbyPowerSavefunction.] isdisplayedwhenthereisnosignalinputfortheselectedtime. Approximately5minuteslater,themessagewillread[NoSignal,Turnoff power.]andthepowerwillbeturnedoff.Thepowerisnotautomatically turnedoffwhenthisfunctionissetto[Off].

PowerIndicator/ButtonLEDSettings

PowerIndicator Brightness

Off 1to5(3)

Adjuststhebrightnessofthepowerindicatoronthemainunit.Thegreater thenumber,thehigherthebrightness.

DisplayButtonLED On,Off SetstheFbuttonsandthelampontheface.

ButtonNameLighting Time

Always,60 sec., 30sec.,10sec.,5sec.

Setsthetime(sec)untilthelamponthefacegoesout,ifnooperationis performed.

[Always]:Thelamponthefaceisalwayslit.

OSD Menu

64

Sub Menu Setting Options (Bold: factory default)

Firmware/LicenseUpdate Thisfunctionisusedtoupdatethevideodisplayfirmware.RefertotheCanonwebsitefordetailed information.

Export/Import1 Setstheexport/importOSDmenusettings.

Export

Target USB User1toUser3

Selecttheexportdestination.

[USB]:ExporttoaUSBmemory. [User1]to[User3]:Exporttothebuilt-inmemoryofthemainunit.

Filename When[Target] [USB] Factorydefaultis"dinfo_dpv****.dat"(****:numberoftheproductname). YoucanchangethenameofthefiletobeexportedtotheUSBmemory within16one-bytecharactersincludingalphabeticalcharacters,numbers, andsymbols.

Execute Performsexport.

Import

Target USB User1toUser3

Specifythesavedestinationforthefiletobeimported.

Filename Displaysfileswiththeextension".dat"soyoucanselectfromamong them.

Settings All Adjustment ChannelSettings DisplaySettings AudioSettings MarkerSettings Function/Network/ SystemSettings

Selectthesettingstoimport.

Execute Performsimport.

PoweronSetting Last memory User1toUser3

Youcanselectthestateofthedisplaywhenthepoweristurnedon.

[Lastmemory]:Launcheswiththesamesettingsaswhenthepowerwas

turnedofftheprevioustime.

[User1]to[User3]:Itstartsupwiththesettingssavedin[User1]to[User3] under[Export].

ResetAllSettings OK Cancel

Returnsallsettingstofactorydefault.Whenselected,themessage[Reset allsettingstofactorydefaults?]appears.

[OK]:Performsreset. [Cancel]:Returnstothepreviousscreenwithoutresetting.

OSD Menu

65

1 Thefollowingsettingscannotbeexportedorimported.

Adjustment CDL/UserLUTBypass

Display Settings ZoomPreset,FrameHold

Function Settings TestPattern

Picture Function Settings Peaking(Enable),FalseColor(Enable),RangeCheck(Enable),2020OutsideofGamutView(Enable),

Monochrome,BlueOnly,RedOff,GreenOff,BlueOff,CompareView(Enable)

System Settings Date/Time,Export/Import,PoweronSetting

UserLUTdatacannotbeexportedorimportedto[User1]to[User3]under[Target].

Themainmenucannotbeimportedorexportedbetweenthevideodisplayandotherproducts.

OSD Menu

66

Function to allow registration for the display F buttons ( 61)

Item Options Item Options

Adjustment PictureMode ChannelSettings ChannelList

Luminance SelectInputSignal

Brightness AudioInput

Chroma SingleInputDualView

ChromaUp CH1toCH20

BacklightControl DisplaySettings ScreenScaling

Gamma/EOTF Anamorphic

HDRRange ZoomPreset

Gain Zoom1

Bias Zoom2

xy Zoom3

PictureMode ITU-RBT.709 FrameHold

ITU-RBT.2020 AudioSettings CHL

AdobeRGB CHR

DCI-P3 Volume

User1(2020PQ) Mute

User2(2020HLG) MarkerSettings1 MarkerPreset

User3(DCIPQ) Marker1

User4(DCIPQD65) Marker2

User5~User9 Marker3

CINEMAEOSSYSTEM Marker4

ACESproxy(ver.1.0.1) Marker5

CDL/UserLUT CDL/UserLUT

CDLRGB

CDLR

CDLG

CDLB

CDLSOP/SAT

CDLSlope

CDLOffset

CDLPower

CDLSaturation

CDL/UserLUTBypass

CDLExport/Import

OSD Menu

67

Item Options

FunctionSettings TC/ALM

TimeCode

AudioLevelMeter

WFM/VEC

WaveFormMonitor

WFMSelectSignal

VectorScope

PixelValueCheck

SignalMonitoringLog

Capture

CameraInformation

PictureFunctionSettings Peaking

Peaking1

Peaking2

FalseColor

FalseColor1

FalseColor2

RangeCheck

RangeCheck1

RangeCheck2

2020OutsideofGamutView

Monochrome

BlueOnly

RedOff

GreenOff

BlueOff

CompareView

SystemSettings SignalInformation

HideOSD2

1 WhenanymarkersettingsarechangedusinganFbutton,thosechangeswillbeappliedto[Enable]underthecurrentlyselected[MarkerPreset]. 2 [HideOSD]isafunctiontohideallOSD.When[On]isselected,OSDand[Separator]arehiddenbutthemenucanbeused.

OSD Menu

68

Signal Information Showsthesignalinformation.When[SelectInputSignal]is[QuadInput],informationfortheentiresignalandeach inputisdisplayed.Selectasignalwiththejogdialaccordingtotheguideattoprightcornerofthemenu.Whensignal informationhasbeenobtainedalthoughitisnotdisplayedonthescreen,thecontentoftheinformationisgrayedout.

SDI Signal HDMI Signal

Item Display Example Item Display Example

Channel InputConfiguration SelectInputSignal ImageDivision Format Resolution PictureRate,I/P/PsF* SDIPayloadID VideoStandard SamplingStructure,BitDepth PictureRate ScanningMethod

LinkNumber Colorimetry TransferCharacteristics

CH1 12-3G/HD-SDI(3G-A) QuadInput Automatic Automatic 4096x2160 24.00P 89C34601 3G-SDI 4:4:4:4GBRA10-bit 24.00 Progressive/Progressive (Transport/Picture) Single/Link_1 UHD SDR-TV

Channel InputConfiguration Format Resolution PictureRate,I/P/PsF PixelEncoding,ColorDepth Matrix Range EOTF MaxLuminance(Peak/Avg.) DisplayLuminance(Max/Min) WhitePoint PrimaryColorRed PrimaryColorGreen PrimaryColorBlue

CH4 HDMI Automatic 4096x2160 60.00P 4:2:2YCbCr10-bit ITU-RBT.709 Full SMPTEST2084(PQ) 1000/500cd/m2

1000-0.005cd/m2

x=0.313,y=0.329 x=0.640,y=0.330 x=0.300,y=0.600 x=0.150,y=0.060

*Whencontentisgrayedout,anasterisk[*]maybedisplayedindicatinglow[PictureRate]accuracysuchas[24.00P*].

System Information Showsthevideodisplaystatusandnetworkinformation.

Item Display Example

Display DP-V1830

SerialNo. 000000000000

Firmware/LicenseVer. 1.0

UsageTime* 5h

IPAddress 192.168.0.1

SubnetMask 255.255.255.0

MACAddress FF:FF:FF:FF:FF:FF

*The[UsageTime]isnotalways[0]whenyoupurchasethedisplayduetofactoryinspection.

69

SupportedSignalFormat

SDI

Transmission method Signal format Color format Color depth Standards

HD-SDI 1280x720P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE2961280x720P50.00Hz

1280x720P29.97/30.00Hz

1280x720P25.00Hz

1280x720P23.98/24.00Hz

1920x1080i59.94/60.00Hz SMPTE292-1 SMPTE274M1920x1080i50.00Hz

1920x1080P29.97/30.00Hz

1920x1080PsF29.97/30.00Hz

1920x1080P25.00Hz

1920x1080PsF25.00Hz

1920x1080P23.98/24.00Hz

1920x1080PsF23.98/24.00Hz

2048x1080P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080PsF29.97/30.00Hz

2048x1080P25.00Hz

2048x1080PsF25.00Hz

2048x1080P23.98/24.00Hz

2048x1080PsF23.98/24.00Hz

3G-SDI (LevelA)

1280x720P59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit SMPTE425-1 SMPTE296

1280x720P50.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P25.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit

1280x720P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

10-bit

1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE274M

Supported Signal Format

70

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelA)

1920x1080i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-1 SMPTE274M

4:2:2YCbCr 12-bit

1920x1080P50.00Hz 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

1920x1080P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

Supported Signal Format

71

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelA)

2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

Supported Signal Format

72

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

1920x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M1920x1080i59.94/60.00Hz 4:4:4RGB

4:4:4YCbCr 12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P50.00Hz 4:2:2YCbCr 10-bit

1920x1080i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

1920x1080PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

2048x1080P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

2048x1080P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

2048x1080P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

Supported Signal Format

73

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

2048x1080P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

2048x1080P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

Supported Signal Format

74

Transmission method Signal format Color format Color depth Standards

3G-SDI (LevelB)

2048x1080PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

DualLink3G-SDI 2SampleInterleave (LevelB)

3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE425-3 SMPTE372 SMPTE274M

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P29.97/30.00Hz SMPTE425-3 SMPTE372 SMPTE2048-2

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

QuadLinkHD-SDI 3840x2160i59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE292-1 SMPTE274M3840x2160i50.00Hz

3840x2160P29.97/30.00Hz

3840x2160PsF29.97/30.00Hz

3840x2160P25.00Hz

3840x2160PsF25.00Hz

3840x2160P23.98/24.00Hz

3840x2160PsF23.98/24.00Hz

4096x2160P29.97/30.00Hz SMPTE292-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160PsF29.97/30.00Hz

4096x2160P25.00Hz

4096x2160PsF25.00Hz

4096x2160P23.98/24.00Hz

4096x2160PsF23.98/24.00Hz

Supported Signal Format

75

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelA)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P50.00Hz 4:2:2YCbCr 12-bit

3840x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF29.97/30.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB 10-bit

12-bit

4:4:4YCbCr 12-bit

4:4:4YCbCr 10-bit SMPTE425-1 SMPTE274M4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

Supported Signal Format

76

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelA)

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE2048-2

4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE2048-24:2:2YCbCr 12-bit

Supported Signal Format

77

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI 2SampleInterleave (LevelA)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE274M3840x2160P50.00Hz 4:2:2YCbCr 10-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160P50.00Hz 4:2:2YCbCr 10-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit

4096x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

QuadLink3G-SDI (LevelB)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE274M

3840x2160i59.94/60.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P50.00Hz 4:2:2YCbCr 10-bit

Supported Signal Format

78

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

3840x2160i50.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE274M4:2:2YCbCr 12-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160PsF23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160P50.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

Supported Signal Format

79

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

4096x2160P29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160PsF29.97/30.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160PsF25.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

Supported Signal Format

80

Transmission method Signal format Color format Color depth Standards

QuadLink3G-SDI (LevelB)

4096x2160PsF23.98/24.00Hz 4:4:4RGB 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4:4:4X'Y'Z' 12-bit

4:4:4YCbCr 12-bit/10-bit SMPTE425-1 SMPTE372 SMPTE2048-2

4:2:2YCbCr 12-bit

QuadLink3G-SDI 2SampleInterleave (LevelB)

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE274M

3840x2160P50.00Hz 4:2:2YCbCr 10-bit

3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE425-5 SMPTE372 SMPTE428-9 SMPTE428-19 SMPTE2048-2

4096x2160P50.00Hz 4:2:2YCbCr 10-bit

4096x2160P47.95/48.00Hz 4:2:2YCbCr 10-bit

4096x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

6G-SDI 3840x2160P29.97/30.00Hz 4:2:2YCbCr 10-bit SMPTE2081-10

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

Supported Signal Format

81

Transmission method Signal format Color format Color depth Standards

DualLink6G-SDI 2SampleInterleave

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit SMPTE2081-11

3840x2160P50.00Hz

12G-SDI 3840x2160P29.97/30.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit SMPTE2082-10

4:2:2YCbCr 12-bit

3840x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

3840x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:2:2YCbCr 12-bit

4096x2160P25.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

4096x2160P23.98/24.00Hz 4:4:4RGB 4:4:4YCbCr

12-bit/10-bit

4:4:4X'Y'Z' 4:2:2YCbCr

12-bit

3840x2160P59.94/60.00Hz 4:2:2YCbCr 10-bit

3840x2160P50.00Hz

4096x2160P47.95/48.00Hz

4096x2160P59.94/60.00Hz

4096x2160P50.00Hz

Supported Signal Format

82

HDMI

Signal format Color format/Color depth

640x480P59.94/60.00Hz 4:4:4RGB8-bit

800x600P60.00Hz

1024x768P60.00Hz

720x480P59.94/60.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

720x576P50.00Hz

1280x720P59.94/60.00Hz

1280x720P50.00Hz

1920x1080P59.94/60.00Hz

1920x1080i59.94/60.00Hz

1920x1080P50.00Hz

1920x1080i50.00Hz

1920x1080P29.97/30.00Hz

1920x1080P25.00Hz

1920x1080P23.98/24.00Hz

2048x1080P59.94/60.00Hz

2048x1080P50.00Hz

2048x1080P29.97/30.00Hz

2048x1080P25.00Hz

2048x1080P23.98/24.00Hz

3840x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit

3840x2160P50.00Hz

3840x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

3840x2160P25.00Hz

3840x2160P23.98/24.00Hz

4096x2160P59.94/60.00Hz 4:4:4RGB8-bit 4:4:4YCbCr8-bit 4:2:2YCbCr12-bit 4:2:0YCbCr12-bit/10-bit/8-bit

4096x2160P50.00Hz

4096x2160P29.97/30.00Hz 4:4:4RGB12-bit/10-bit/8-bit 4:4:4YCbCr12-bit/10-bit/8-bit 4:2:2YCbCr12-bit

4096x2160P25.00Hz

4096x2160P23.98/24.00Hz

83

Image/FrameDisplay

SDI

Signal system Display Method

1280x720 23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

1920x1080 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

2048x1080 23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

Image/Frame Display

84

Signal system Display Method

3840x2160 50.00 i 50.00 P

59.94/60.00 i 59.94/60.00 P

23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

4096x2160 23.98/24.00 PsF 47.96/48.00 P*

25.00 PsF 50.00 P*

29.97/30.00 PsF 59.94/60.00 P*

23.98/24.00 P 47.96/48.00 P*

25.00 P 50.00 P*

29.97/30.00 P 59.94/60.00 P*

47.95/48.00 P 47.95/48.00 P

50.00 P 50.00 P

59.94/60.00 P 59.94/60.00 P

*Displayingsameframe

Image/Frame Display

85

HDMI

Signal system Display Method

640x480 59.94/60.00 P 59.94/60.00 P

800x600 60.00 P 60.00 P

720x480 59.94/60.00 P 59.94/60.00 P

720x576 50.00 P 50.00 P

1024x768 60.00 P 60.00 P

1280x720 59.94/60.00 P 59.94/60.00 P

1280x720 50.00 P 50.00 P

1920x1080 59.94/60.00 P 59.94/60.00 P

1920x1080 59.94/60.00 i 59.94/60.00 P

1920x1080 50.00 P 50.00 P

1920x1080 50.00 i 50.00 P

1920x1080 29.97/30.00 P 59.94/60.00 P*

1920x1080 25.00 P 50.00 P*

1920x1080 23.98/24.00 P 47.96/48.00 P*

2048x1080 59.94/60.00 P 59.94/60.00 P

2048x1080 50.00 P 50.00 P

2048x1080 29.97/30.00 P 59.94/60.00 P*

2048x1080 25.00 P 50.00 P*

2048x1080 23.98/24.00 P 47.96/48.00 P*

3840x2160 59.94/60.00 P 59.94/60.00 P

3840x2160 50.00 P 50.00 P

3840x2160 29.97/30.00 P 59.94/60.00 P*

3840x2160 25.00 P 50.00 P*

3840x2160 23.98/24.00 P 47.96/48.00 P*

4096x2160 59.94/60.00 P 59.94/60.00 P

4096x2160 50.00 P 50.00 P

4096x2160 29.97/30.00 P 59.94/60.00 P*

4096x2160 25.00 P 50.00 P*

4096x2160 23.98/24.00 P 47.96/48.00 P*

*Displayingsameframe

86

ErrorMessages

Message Description and Action

Network Communicationerror. IPaddressmaybeinconflictortheremaybea networkcommunicationerror.Checkthenetwork environment.

InvalidIPAddress. EnterthecorrectIPaddress.

InvalidSubnetMask. Enterthecorrectsubnetmask.

Varioussettings, CDLexport

TheUSBmemoryisfull. UseanotherUSBmemoryordeletethecontentof thememory.

Failedtowritefile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

LUT,Varioussettings, CDLimport

(LUTImport)"LUTType"isdifferent. (CDLImport)"FileType"isdifferent.

Selectthecorrectfileformat.

Failedtoreadfile. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

Failedtoimport. Thereisanerrorinthefiletobeimported.Checkthe file.

Noimportfile. Checkandensurethatthefilehasbeensavedtothe USBmemoryorimportedto[User1]to[User3].

ScreenCapture Failedtocapture. TheUSBmemorymaybedefectiveorprotected. ChecktheUSBmemory.

InvalidSignal. Ascreendisplayingnovideoisbeingcapturedfor examplethereisnosignaloranunsupportedsignal isbeinginput.Checkthesignal,inputitagain,and captureit.

Copyprotectedsignal. Thesignalyoutriedtocapturemaybeprotectedby HDCP2.2whichisacopypreventionstandardfor HDMI.Inthiscase,thesignalcannotbecaptured. ChecktheHDMIsignal.

Failedtoplaybackfile. TheUSBmemoryorthefilemaybedefectiveor protected.ChecktheUSBmemoryorthefile.

Nocapturefile. Checkandensurethatthefilehasbeensavedtothe USBmemory.

Error Messages

87

Message Description and Action

Hardwareerror Backlighterror. Disconnectthepowercord,reconnectit,andthen turnonthepower. Ifthemessagepersists,contactCanonCustomer Center.

Panelerror.

I/Ferror.

AudioI/Ferror.

Systemerror.

Inputsignal NoSignal Displayedwhenthereisnovideosignalinput.

Unsupported Unsupportedvideosignalisinput.Checkthe supportedsignalformat( 69).

Operation Invalidoperation. Operationisdisabled.Checkthesettingitems.

"ProtectSettings"ison. TousetheOSDmenu,movetheselectionframe to[Protect]andpressthejogdialforapproximately 3seconds.

"CDL/UserLUTBypass"ison. When[CDL/UserLUT] [Bypass]isturned[On], youcannotadjust[Power],[Saturation],[Offset],or [Slope].

InvalidPassword. Enterthecorrectpassword.

Nolicense. Thisfunctioncannotbeusedasthelicensefilehas notbeenapplied.RefertotheCanonwebsitefor detailedinformation.

USBmemory USBmemoryisnotconnected. CorrectlyconnecttheUSBmemorytotheUSBport ofthismainunit.

UnsupportedUSBmemory. ChecktheUSBmemoryformatandmakesureitis notprotected.

FirmwareUpdate Noupdatefile. FirmwareupdatefilesarenotsavedonUSBmemory orothermedia.

Failedtoreadupdatefile. Thereisanerrorinthefile.Checkthefile.

Thefirmware/licensehasbeenalreadyupdated. Thisisthefilethatisupdatedonthevideodisplay.

Error Messages

88

Message Description and Action

DCpowersupply LowVoltage. Thebatterychargeleveldropsifusingthebattery. Ifyouuseanotherpowersource,checktheinput voltageoftheDCpowersupply.

LowVoltage,Turnoffpower. ThepowerhasshutoffasDCpowervoltage becameinsufficientforcontinuedoperation. Theremaynotbeenoughenergyleftifyouareusing thebattery.Connectachargedbatteryandturnthe videodisplaypoweron. Ifyouuseanotherpowersource,checktheinput voltageoftheDCpowersupply.

InvalidVoltage,Turnoffpower. ThepowerhasshutoffastheDCpowerinput voltageexceededtheoperationalthreshold.Check theinputvoltageoftheDCpowersupply.

PowerSaving NoSignal,TurnoffpowerbyPowerSavefunction. This indicatesthat therehavenotbeenanysignals for thetimeset to [PowerSave].Thepowerwillbe turnedoffapproximately5minutes later.Checkthe inputsignal.

NoSignal,Turnoffpower. This indicates that thepower is turnedoff after approximately5minutesastherehasbeennosignal. Checktheinputsignal.

89

Troubleshooting

Symptom Cause and Action

Powerdoesnotturnon. (Powerindicatordoesnotturnon.)

Pressthe button.

Checkthatthepowercordisconnectedcorrectly.

Brightnessofthepowerindicatormaybeturnedoff.Turnitonand checkoncemore.

63

Thescreenisdark. Whenthepowerindicatordoesnotturnon: Pressthe button.

Checkthatthepowercordisconnectedcorrectly.

Whenthepowerindicatorislitorange: Pressthe button.

Whenthepowerindicatorisflashingorange: Flashingonceevery3seconds: ContactCanonCustomerCenter.

Flashingtwiceevery3seconds: -Turnonthepowerwiththe button. -Thetemperatureofthedisplayrises(orfalls)dependonoperation environment.Checktheenvironmentalconditionsanddonotusein directsunlight. -Ifthepowerstilldoesnotturnon,contactCanonCustomerCenter.

Thepowerwasturnedoffwhenthere werenotanysignals.

When[PowerSave]issettootherthan[Off],thevideodisplayspoweris automaticallyturnedoffifthenovideosignalisinputforacertainperiodof time.Turnonthepoweragain.

ThepowersuddenlygoesoffwhenaDC powersupplyisused.

DependingonthemodelofDCpowersupplyused,theoutputvoltage maydecreasesuddenlyandeventurnoff(0Voutput)whenathreshold valueisreached.Beforethat,awarningmessageaboutlowinput voltagemaybedisplayedonlybrieflyornotatall.Connectacharged DCpowersupplyorACpowersupply.

Theimagedoesnotdisplay. Seteachitemin[ChannelSettings]accordingtoinputsignal. 34

ThereisablankareawhensettoQuad Input/DualInput.

Theremaybenoinputsignal.Checkthesignal.

Somecombinationsarenotsupported.Checkthesignal.

34 68

Screenistoobright/dark. Adjustthe[Luminance]ontheOSDmenu.

ThereisalimitontheservicelifeofLCDbacklight.Ifthescreen becomesdarkorstartsflickering,contactCanonCustomerCenter.

19

Troubleshooting

90

Symptom Cause and Action

Burn-inimageappears. ThisisacharacteristicoftheLCDpanelandyoushouldavoiddisplaying stationaryimageforalongtime.

Whenburn-inimageappearswiththeinterlacedsignaldisplayed,try changingsettingto: [ChannelSettings] [I/PConversion] [Normal].

38

Thereisanunlitorred,blue,green,or whitedotonscreen.

LCDdisplayismadeofveryhighprecisiontechnology.Ithaseffective pixelsof99.99%ormore,buttheremaybeblackdotsorred,blue,or greendotsthatmaybealwayson.Thisisnotafailure.

Thereisaninterferencepatternortrace thatremainswhentheLCDpanelis pressed.

Thesymptommayberesolvedbydisplayingawhiteorblackimageon theentirescreen.

OSDmenucannotbeused. Checkthat[ProtectSettings]isnotset. 62

[AspectMarker],[SafetyZoneMarker]or [AreaMarker]doesnotappear.

Achannelwithnosignal,unsupportedsignal,orwith[Input Configuration]notsetmaybeselected.Checkthesignal.

68

Youforgotthepasswordfor[Protect Settings].

Pressthejogdialandthe buttonwhilethevideodisplayisinstandby. Theconfigurationwillberesettothestatewherenopasswordisset.

Thevideodisplaydoesnotstartupinthe conditionthatthepowerwasturnedoff lasttime.

Checkthe[PoweronSetting]ontheOSDmenu.Set[Lastmemory]to startupthevideodisplayintheconditionthatthepoweristurnedofflast time.

64

TheimagequalityfortheUsermodein [PictureMode]differsfromtheimage qualityofpresets.

Selectthepresetmodeby[CopyPictureMode]andcopythesettings. 28

Imagequalityisautomaticallychanged. Checkthe[ChannelSettings] [PictureMode]settings. 8

36

Thesameimageisdisplayedintwo screens.

Checkthe[ChannelSettings] [SingleInputDualView]settings. 36

91

SoftwareUsedinThisProduct

SoftwareinstalledwiththisproductincludessoftwaremodulesfromCanonorthirdparties.

Software Developed by Canon and Free Software

SoftwaredevelopedorcreatedbyCanonandaccompanyingdocumentisprotectedbycopyrightlaw,termsofan internationalconventionandanyothergoverninglaws. Thisproductusessoftwaremodulesundercopyrightbythirdpartiesanddistributedasfreesoftware.Someofthese softwaremodulesaresubjecttotheGNUGeneralPublicLicensev2(GPL),GNULesserGeneralPublicLicensev2.1 (LGPL)oranyotherlicense.

Free software modules installed with this product

libupnp libxml2 libpng lz4 zlib FreeRTOS u-boot-xlnx attr avahi base-files base-passwd bridge-utils busybox eudev exfat-utils fuse fuse-exfat gcc-runtime glibc init-ifupdown initscripts kernel-module-vcu kmod libdaemon libgcc libomxil-xlnx libpam libxcrypt linux-xlnx modutils-initscripts netbase opkg-utils packagegroup-core-boot shadow shadow-securetty sysvinit sysvinit-inittab udev-extraconf update-rc.d util-linux vcu-firmware

Acquiring Source Code for Free Software

Somefreesoftwarerequirestheacquirementofthesourcecodeofmodulesinordertodistributetheexecutableform ofthosesoftwaremodules.Forinformationonhowtoacquirethesourcecodeforfreesoftwaresuchastheseand confirmingtermsoftheGPL,LGPLandotherlicenseagreements,pleasecheckwiththedistributorfromwhomthe productwaspurchased.

License Agreement for this Product

Obligation to Present License Agreement

Thecopyrightholdersofsoftwaremodulesinstalledwiththisproductrequireitslicenseagreementtobedisplayed. Thislicenseagreementisasfollows:

libupnp License

Copyright(c)2000-2003IntelCorporationAllrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:

* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

* NeithernameofIntelCorporationnorthenamesofitscontributorsmaybeusedtoendorseorpromoteproducts derivedfromthissoftwarewithoutspecificpriorwrittenpermission.

Software Used in This Product

92

THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANYEXPRESS ORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOFMERCHANTABILITY ANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLINTELORCONTRIBUTORS BELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIALDAMAGES (INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOFSUBSTITUTEGOODSORSERVICES;LOSSOFUSE, DATA,ORPROFITS;ORBUSINESSINTERRUPTION)HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY, WHETHERINCONTRACT,STRICTLIABILITY,ORTORT(INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGIN ANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

libxml License

Copyright(C)1998-2003DanielVeillard.AllRightsReserved.

Permissionisherebygranted,freeofcharge,toanypersonobtainingacopyofthissoftwareandassociated documentationfiles(the"Software"),todealintheSoftwarewithoutrestriction,includingwithoutlimitationtherightsto use,copy,modify,merge,publish,distribute,sublicense,and/orsellcopiesoftheSoftware,andtopermitpersonsto whomtheSoftwareisfurnishedtodoso,subjecttothefollowingconditions:

Theabovecopyrightnoticeandthispermissionnoticeshallbeincludedinallcopiesorsubstantialportionsofthe Software.

THESOFTWAREISPROVIDED"ASIS",WITHOUTWARRANTYOFANYKIND,EXPRESSORIMPLIED,INCLUDING BUTNOTLIMITEDTOTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEAND NONINFRINGEMENT.INNOEVENTSHALLTHEDANIELVEILLARDBELIABLEFORANYCLAIM,DAMAGESOR OTHERLIABILITY,WHETHERINANACTIONOFCONTRACT,TORTOROTHERWISE,ARISINGFROM,OUTOFOR INCONNECTIONWITHTHESOFTWAREORTHEUSEOROTHERDEALINGSINTHESOFTWARE.

Exceptascontainedinthisnotice,thenameofDanielVeillardshallnotbeusedinadvertisingorotherwisetopromote thesale,useorotherdealingsinthisSoftwarewithoutpriorwrittenauthorizationfromhim.

lz4

LZ4Library Copyright(c)2011-2016,YannCollet Allrightsreserved.

Redistributionanduseinsourceandbinaryforms,withorwithoutmodification,arepermittedprovidedthatthe followingconditionsaremet:

* Redistributionsofsourcecodemustretaintheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimer.

* Redistributionsinbinaryformmustreproducetheabovecopyrightnotice,thislistofconditionsandthefollowing disclaimerinthedocumentationand/orothermaterialsprovidedwiththedistribution.

THISSOFTWAREISPROVIDEDBYTHECOPYRIGHTHOLDERSANDCONTRIBUTORS"ASIS"ANDANY EXPRESSORIMPLIEDWARRANTIES,INCLUDING,BUTNOTLIMITEDTO,THEIMPLIEDWARRANTIESOF MERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSEAREDISCLAIMED.INNOEVENTSHALLTHE COPYRIGHTHOLDERORCONTRIBUTORSBELIABLEFORANYDIRECT,INDIRECT,INCIDENTAL,SPECIAL, EXEMPLARY,ORCONSEQUENTIALDAMAGES(INCLUDING,BUTNOTLIMITEDTO,PROCUREMENTOF SUBSTITUTEGOODSORSERVICES;LOSSOFUSE,DATA,ORPROFITS;ORBUSINESSINTERRUPTION) HOWEVERCAUSEDANDONANYTHEORYOFLIABILITY,WHETHERINCONTRACT,STRICTLIABILITY,ORTORT (INCLUDINGNEGLIGENCEOROTHERWISE)ARISINGINANYWAYOUTOFTHEUSEOFTHISSOFTWARE,EVEN IFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.

Software Used in This Product

93

FreeRTOS

Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. If you wish to use our Amazon FreeRTOS name, please do so in a fair use way that does not cause confusion.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

packagegroup-core-boot, shadow-securetty, udev-extraconf

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE

shadow

Copyright (c) The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following

disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following

disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products

derived from this software without specific prior written permission.

Software Used in This Product

94

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

95

Index

Number 2SampleInterleave................................................... 34

3D-LUT..................................................................... 25

200%(ScreenScaling).............................................. 37

2020ConstantLuminance........................................ 27

2020GamutMapping............................................... 27

2020OutsideofGamutView..................................... 57

A ACESproxy................................................................ 19

Adjustment................................................................ 19

AdobeRGB............................................................... 19

ALTmode.................................................................. 13

Anamorphic......................................................... 37,53

AnchorAdjustment................................................ 7,28

AnchorPoint............................................................... 7

AreaMarker............................................................... 43

AspectMarker........................................................... 40

AudioInput................................................................ 35

AudioLevelMeter...................................................... 47

AUDIOOUTterminal.................................................. 39

AudioSettings........................................................... 39

AutomaticAdjustment

(CINEMAEOS/ARRI/VARICAM)............................. 52

B BacklightControl....................................................... 20

Banner...................................................................... 62

BiasR/G/B............................................................ 6,20

BlueOff..................................................................... 58

BlueOnly................................................................... 58

Brightness................................................................. 19

ButtonNameLightingTime....................................... 63

Bypass(CDL/UserLUT)....................................... 24,26

C CameraInformation................................................... 53

CameraLink.............................................................. 52

CanonLog,CanonLog2,CanonLog3..................... 21

CDLExport/CDLImport............................................ 11

CDL/UserLUT........................................................... 24

CenterMarker........................................................... 44

Channel..................................................................... 61

ChannelButton......................................................... 61

ChannelName........................................................... 35

ChannelOrder........................................................... 48

ChannelSettings....................................................... 34

Chroma..................................................................... 19

ChromaticityDiagram................................................ 50

CINEMAEOSSYSTEM(PictureMode)...................... 19

ColorGamut.............................................................. 20

ColorRange.............................................................. 23

ColorRange(UserLUT)............................................. 25

ColorTemperature................................................. 6,20

CompareView........................................................... 58

CopyPictureMode.................................................... 28

Custom(xy)(ColorTemperature)................................ 20

D Date/Time........................................................... 11,61

DCI-P3...................................................................... 19

DCpowersupply....................................................... 88

DetailSettings

Adjustment............................................................ 26

CDL/UserLUT....................................................... 25

DisplayButtonLED................................................... 63

DisplayName............................................................ 62

DisplaySettings......................................................... 37

DualInput.................................................................. 34

E ErrorMessage........................................................... 86

Export/Import...................................................... 10,64

Export(SignalMonitoring).......................................... 51

F FalseColor................................................................ 56

Firmware/LicenseUpdate.......................................... 64

Firmware/LicenseVer................................................. 68

Format....................................................................... 35

FrameHold............................................................... 38

FunctionButton/FunctionButton(ALT)...................... 61

FunctionButtonGuide............................................... 62

FunctionSettings....................................................... 47

96 G GainR/G/B............................................................ 6,20

Gamma/EOTF........................................................... 21

GPI...................................................................... 17,61

GreenOff................................................................... 58

GridMarker............................................................... 44

H HDMI................................................................... 82,85

HDMILink................................................................. 28

HDRRange............................................................... 22

HideOSD.................................................................. 67

HLGSystemGamma................................................ 27

HybridLog-Gamma................................................... 21

I ImageDivision........................................................... 34

Image/FrameDisplay................................................. 83

InMonitorDisplay...................................................... 60

InputConfiguration.................................................... 34

Interlace.................................................................... 38

I/PConversion........................................................... 38

I/PsF.......................................................................... 38

ITU-RBT.709............................................................. 19

ITU-RBT.1886........................................................... 21

ITU-RBT.2020........................................................... 19

J Jogdial....................................................................... 4

L Language.................................................................. 61

LAN(Network/IMDSettings)................................ 18,60

LinkOrder................................................................. 35

LocalDimming.......................................................... 20

LTC........................................................................... 47

Luminance................................................................. 19

LUTImport............................................................ 9,26

LUTPreset.......................................................... 10,25

M MACAddress............................................................ 68

MarkerPreset............................................................ 40

MarkerSettings......................................................... 40

MENUbutton.............................................................. 4

Metadata..................................................................... 8

Monochrome............................................................. 58

MultiView(Dual/Quad).............................................. 34

N NativeInputResolution(ScreenScaling).................... 37

Network/IMDSettings............................................... 60

O Offset........................................................................ 24

OSDBrightness......................................................... 62

OSDMenu............................................................ 4,19

OSDSettings............................................................. 62

OutputTransform...................................................... 23

OutputTransformSurround....................................... 23

OverRange............................................................... 57

P Password.................................................................. 62

Peakbrightness......................................................... 19

Peaking..................................................................... 56

PictureFunctionSettings........................................... 56

PictureMode....................................................... 19,36

PixelValueCheck...................................................... 50

Power........................................................................ 24

PowerIndicatorBrightness........................................ 63

PowerIndicator/ButtonLEDSettings......................... 63

PoweronSetting....................................................... 64

PowerSave............................................................... 63

PQ............................................................................. 21

ProtectSettings......................................................... 62

PsF............................................................................ 38

Q QuadInput................................................................ 34

R RangeCheck............................................................ 57

RedOff...................................................................... 58

Reset......................................................................... 28

ResetAllSettings...................................................... 64

RESETbutton.............................................................. 4

97 S SafetyZoneMarker................................................... 41

Saturation.................................................................. 24

ScreenCapture......................................................... 52

ScreenScaling.......................................................... 37

SDI...................................................................... 69,83

SelectChannel.......................................................... 34

SelectInputSignal..................................................... 34

Separator.................................................................. 36

SerialNo.................................................................... 68

SignalFormat............................................................ 69

SignalInformation...................................................... 68

SignalMonitoring....................................................... 51

SingleInput............................................................... 34

SingleInputDualView............................................... 36

S-Log2/S-Log3....................................................... 21

Slope......................................................................... 24

Speaker..................................................................... 39

SquareDivision.......................................................... 34

SubnetMask............................................................. 60

SystemInformation.................................................... 68

SystemSettings........................................................ 61

T TestPattern............................................................... 51

TimeCode................................................................ 47

Troubleshooting......................................................... 89

TSLProtocol............................................................. 18

U UsageTime............................................................... 68

User19.................................................................... 19

UserLUT................................................................... 24

UserLUTPresetName.............................................. 26

V VectorScope............................................................. 50

VideoPosition(MultiView)......................................... 38

VITC.......................................................................... 47

Volume...................................................................... 39

W WaveFormMonitor................................................... 48

Y YCbCrColorMatrix................................................... 27

Z Zoom.................................................................... 7,38

MIE-0026-000 CANONINC.2021

The information in this document is verified as of September 2021. Subject to change without notice. Visit your local Canon website to download the latest version.

USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support

Manualsnet FAQs

If you want to find out how the DP-V1830 Canon works, you can view and download the Canon DP-V1830 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Canon DP-V1830 as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Canon DP-V1830. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon DP-V1830 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon DP-V1830 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon DP-V1830 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon DP-V1830 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon DP-V1830 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.