Canon Digital IXUS 110 IS User Guide PDF

1 of 164
1 of 164

Summary of Content for Canon Digital IXUS 110 IS User Guide PDF

Camera User Guide

D IG

ITA L C

A M

ER A

C am

era U ser G

uide

CDI-E396-030 XXXXXXX CANON INC. 2009 PRINTED IN JAPAN

Trademark Acknowledgments The SDHC logo is a trademark. HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC. Disclaimer Reprinting, transmitting, or storing in a retrieval system any part of this

guide without the permission of Canon is prohibited. Canon reserves the right to change the contents of this guide at any

time without prior notice. Illustrations and screenshots in this guide may differ slightly from the

actual equipment. Every effort has been made to ensure that the information contained in

this guide is accurate and complete. However, if you notice any errors or omissions, please contact the Canon customer service center indicated on the customer support list included with the product.

The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.

Battery Charger CB-2LV

This product is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded.

This power unit is intended to be correctly orientated in a vertical or floor mount position.

IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.

This battery charger is for exclusive use with Battery Pack NB-4L (0.76 Ah). There is a danger of explosion if other battery packs are used.

Make sure you read this guide before using the camera. Store this guide safely so that you can use it in the future.

ENGLISH

CO PY

Check if the following items are included in your camera package. If anything is missing, contact the retailer from which you purchased the camera.

A memory card is not included. Adobe Reader is required to view the PDF manuals.

Checking the Package Contents

Camera Battery Pack NB-4L (with Terminal Cover)

Interface Cable IFC-400PCU

AV Cable AVC-DC400

Wrist Strap WS-DC7

Warranty Card

Camera User Guide (This Guide)

DIGITAL CAMERA Solution Disk

Canon Customer Support Leaflet

Battery Charger CB-2LV/CB-2LVE

Also refer to the PDF manuals on the CD-ROM. After installation, shortcut icons appear on the desktop. If the software installation fails, you can find the manuals in the Readme folder on the CD-ROM. Personal Printing Guide

Read when you want to connect the camera to a printer and print.

Software Starter Guide Read when you want to connect the camera to a computer.

Detailed user guides (PDF format) for the included ZoomBrowser EX and ImageBrowser programs are available on the Canon website (English only): http://web.canon.jp/imaging/information-e.html

CO PY

2

Test Shots Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.

Warning Against Copyright Infringement The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright laws without the prior permission of the copyright holder. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.

Warranty Limitations This cameras warranty is only effective in the country of sale. If there is a problem with the camera while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your camera.

LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification, but occasionally non-performing pixels may appear as bright or dark dots. This is not a malfunction and has no effect on the recorded image.

Camera Body Temperature Please take care when operating the camera for an extended period as the camera body may become warm. This is not a malfunction.

Memory Cards The various types of memory cards that can be used in this camera are collectively referred to as memory cards in this guide.

For CA, USA only Included lithium battery contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Read This First

CO PY

3

What Do You Want to Do?

Shoot 4 Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 24 Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 56 58

Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 64, 80 Shoot in places where I cannot use the flash (turn off the flash) 59 Shoot pictures with me in them too (self-timer). . . . . . . . . . . 63, 64 Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 62 Take close-up pictures of subjects (macro shooting) . . . . . . . . . 68 Take close-up pictures of subjects using the zoom

(digital macro shooting). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 75 Change the size of picture I want to take (recording pixels) . . . . 70 Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Shoot without the effects of camera shake

(image stabilization) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Shoot without the effects of camera shake even in

low light conditions (High ISO Auto) . . . . . . . . . . . . . . . . . . . 58, 72

yAquarium (p. 57)

SUnderwater (p. 57)

ZLow light (p. 58)

H tIndoors (p. 57)

Fireworks (p. 57)

I F w PWith nightscapes (p. 56)

At the beach (p. 57)

With snowscapes (p. 58)

VKids and pets (p. 56)

Portraits (p. 56)

Take good people shots

OU Foliage (p. 57)

Sunsets (p. 57)

Take good landscapes

Shoot various other scenes

CO PY

4

What Do You Want to Do?

Maintain the focus on moving subjects (Servo AF). . . . . . . . . . . 82 Make dark subjects appear brighter (i-Contrast). . . . . . . . . . . . . 85

View 1 Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Automatically play back pictures (slideshow) . . . . . . . . . . . . . . 101 Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 100 Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 107 Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 110

Shoot/View Movies E Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2 Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Print

Save Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Other 3 Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 127

CO PY

5

Chapters 1 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter.

Checking the Package Contents .......2 Read This First ..................................3 What Do You Want to Do? ................4 Conventions Used in this Guide ........8 Safety Precautions.............................9

Charging the Battery........................14 Inserting the Battery and

Memory Card .............................16 Setting the Date and Time...............19 Setting the Display Language..........21 Formatting Memory Cards ...............22 Pressing the Shutter Button.............23 A Taking Pictures.......................24 1 Viewing Images..........................27 Erasing Images................................29 Printing Images................................30 E Shooting Movies.........................32 1 Viewing Movies ..........................34 Transferring Images to a Computer.35 Accessories .....................................38 Separately Sold Accessories ...........40

Components Guide..........................42 Information Displayed on

the Screen..................................44 Indicator ...........................................46 m FUNC. Menu Basic

Operations .................................47 n Basic Operations ..............48

Changing the Sound Settings ......... 49 Changing the Screen Brightness .... 50 Returning the Camera to Default

Settings ..................................... 51 Low Level Memory Card

Formatting ................................. 52 Power Saving Function

(Auto Power Down) ................... 53 Clock Functions............................... 53

Shooting in Various Conditions ....... 56 ! Turning the Flash Off.................. 59 Zooming in More Closely on

Subjects (Digital Zoom) ............. 60 Inserting the Date and Time............ 62 Using the Self-Timer................... 63 " Using the Face Self-Timer.......... 64

G Shooting in Program AE ............. 66 h Turning the Flash On................... 67 u Shooting Far Away Subjects

(Infinity)...................................... 67 e Shooting Close-ups (Macro) ....... 68 R Zooming In on Close Subjects

(Digital Macro) ........................... 69 Changing the Recording Pixels....... 70 Changing the Compression Ratio

(Image Quality).......................... 70

Table of Contents

1 Getting Started ....................13

2 Learning More......................41

3 Shooting in Special Conditions and Commonly Used Functions................... 55

4 Selecting Settings Yourself ............................... 65

CO PY

6

Table of Contents

Changing the ISO Speed................ 72 Adjusting the White Balance........... 73 Adjusting the Brightness

(Exposure Compensation) ........ 74 W Continuous Shooting ................. 74 Changing the Tone

of an Image (My Colors) ........... 75 Shooting Using the Two Second

Self-Timer ................................. 76 $ Customizing the Self-Timer........ 77 Shooting Using a TV Monitor .......... 78 Changing the Composition with

the Focus Lock.......................... 78

Changing the AF Frame Mode........ 80 Magnifying the Focal Point.............. 81 % Shooting with the AF Lock ........ 82 Shooting with Servo AF .................. 82 Changing the Metering Mode.......... 83 & Shooting with the AE Lock ........ 83 ( Shooting with the FE Lock ........ 84 Shooting with Slow Synchro ...... 84 @ Making Dark Subjects Appear

Brighter (i-Contrast) .................. 85 Red-Eye Correction ................... 86 Checking for Shut Eyes .................. 86 Shooting Long Exposures .......... 87 Changing the Color and Shooting... 88 L Shooting Stitch Assist Images . 90

Changing the Movie Mode.............. 92 Changing the Image Quality ........... 92

AE Lock/Exposure Shift...................93 Other Shooting Functions................94 Playback Functions ......................... 94 * Editing ......................................... 95

g Quickly Searching Images.......................................98

Viewing Images in Filtered Playback.................................. 100

. Viewing Slideshows .................. 101 Checking the Focus....................... 103 k Magnifying Images ................... 104 + Changing Image Transitions..... 104 Viewing Images on a TV ............... 105 Viewing Images on a

High-Definition TV ................... 106 / Erasing All Images.................... 107 : Protecting Images................... 110 ; Organizing Images

by Category (My Category) ..... 112 \ Rotating Images........................ 114 = Resizing Images ....................... 115 [ Trimming ................................... 116 ? Adding Effects with

the My Colors Function............ 117 @ Making Dark Subjects Appear

Brighter (i-Contrast) ................. 118 ] Correcting the Red-Eye Effect .. 119 Printing from the Print List (DPOF) 120 Selecting Images for Printing

(DPOF) .................................... 121

5 Getting More Out of Your Camera ....................... 79

6 Using Various Functions for Shooting Movies ........... 91

7 Using Playback and Other Functions............................. 97

CO PY

7

Conventions Used in this Guide

Changing Functions.......................126 Changing Shooting Functions........130 Changing Playback Functions .......134 Changing the Start-up

Image or Sound .......................135

Using Household Power................ 138 Troubleshooting ............................ 139 List of Messages

that Appear on the Screen ...... 142 Functions Available in Each

Shooting Mode ........................ 144 Menus ........................................... 146 Handling Precautions .................... 150 Specifications ................................ 151 Index ............................................. 154

Icons are used in the text to represent the camera buttons and switches. Language that displays on the screen appears inside [ ] (square

brackets). The directional buttons, control dial, and FUNC./SET button are

represented by the following icons.

: Troubleshooting tips. : Hints for getting more out of your camera. : Things you should be careful about. : Supplemental information. (p. xx): Reference pages. xx stands for page number. This chapter assumes all functions are at their default settings.

8 Customizing the Camera ..125 9 Useful Information............ 137

Conventions Used in this Guide

(Right button)

(FUNC./SET button)

(Up button)

(Left button)

(Down button)

(Control dial)

CO PY

8

Before using the camera, please ensure that you read the safety precautions described below. Always ensure that the camera is operated correctly.

The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment.

Be sure to also check the guides included with any separately sold accessories you use.

Camera

Warning Denotes the possibility of serious injury or death.

Caution Denotes the possibility of injury.

Caution Denotes the possibility of damage to the equipment.

Warning

Do not trigger the flash in close proximity to human eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.

Store this equipment out of the reach of children and infants. Strap: Putting the strap around a childs neck could result in asphyxiation. Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs, contact a doctor immediately.

Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide.

To avoid the risk of injury, do not touch the interior of the camera if it has been dropped or otherwise damaged.

Stop operating the camera immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.

Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.

Do not allow liquids or foreign objects to enter the camera. This could result in electrical shock or fire. If liquid or foreign objects come into contact with the camera interior, immediately turn the camera power off and remove the battery.

Use only recommended power sources. Using other power sources could result in fire or electrical shock.

Safety Precautions

CO PY

9

Safety Precautions

Battery, Battery Charger

Other Warnings

Use only recommended batteries. Do not place the battery near or in direct flame. Do not let the battery come into contact with water (e.g. sea water) or other liquids. Do not attempt to disassemble, alter or apply heat to the battery. Avoid dropping or subjecting the battery to severe impacts.

This may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing contacts these substances, immediately flush with water and seek medical assistance. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk.

Use only the specified battery charger to charge the battery. Do not cut, damage, alter or place heavy items on the power cord. Unplug the power cord periodically and wipe away any dust and dirt that has

collected on the plug, the exterior of the power outlet, and the surrounding area. Do not handle the power cord with wet hands.

This could result in electrical shock or fire.

Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.

Caution Be careful not to bang the camera or subject it to strong impacts or shocks

when hanging it by the strap. Be careful not to bump or push strongly on the lens.

This could lead to injury or damage the camera. Do not use the equipment in a manner that exceeds the rated capacity of the

electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet. This could result in electrical shock or fire.

Avoid using, placing or storing the camera in the following places. - Places subject to strong sunlight. - Places subject to temperatures above 40 C (104 F). - Humid or dusty areas. These could cause leakage, overheating or an explosion, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing.

CO PY

10

Safety Precautions

Do not allow dirt or metal objects (such as pins or keys) to contact the charger terminals or plug. This could result in electrical shock, fire or other damage.

Playing back for a long time may cause feelings of discomfort.

When using the flash, be careful not to cover it with your fingers or clothing. This could result in burns or damage to the flash.

Caution Do not aim the camera at bright light sources (the sun, etc.).

Doing so may cause malfunctions or damage the image sensor (CCD).

When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera. This may cause the camera to malfunction.

In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.

Unplug the battery charger from the power outlet after recharging is complete, or when you are not using it.

Do not place anything, such as cloth, on top of the battery charger while it is charging. Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.

Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur.

Before you discard batteries, cover the terminals with tape or other insulators. Contacting other metal materials in waste containers may lead to fire or explosions.

Keep the battery out of the reach of pets. If the battery is bitten, this could cause leakage, overheating or an explosion, resulting in fire, burns or other injuries.

Do not sit in a chair with the camera in your pocket. Doing so may cause malfunctions or damage the LCD monitor.

CO PY

11

Safety Precautions

When putting the camera in your bag, ensure that hard objects do not come into contact with the LCD monitor.

Do not attach accessories to the strap. If this occurs, it may cause malfunctions or damage the LCD monitor.

CO PY

12

Getting Started This chapter explains preparations before shooting, how to shoot in A mode, and then how to view, erase and print the images you take. The latter part of this chapter explains how to shoot and view movies and transfer images to a computer.

Attaching the Strap/Holding the Camera Attach the included strap and place it around your wrist to avoid dropping

the camera during use. Keep your arms tight against your body while holding the camera firmly by

the sides. Be sure that your fingers do not block the flash.

1

Strap

CO PY

13

Use the included charger to charge the battery.

Remove the cover.

Insert the battery. Align the marks on the battery and

charger, then insert the battery by sliding it in and down .

Charge the battery. For CB-2LV: Flip out the plug and plug

the charger into a power outlet . For CB-2LVE: Plug the power cord into

the charger, then plug the other end into a power outlet. The charge lamp lights red and charging starts.

The charge lamp will light green when charging has finished. Charging takes approx. 1 hour and 30 minutes.

Remove the battery. Unplug the battery charger from the power

outlet, then remove the battery by sliding it in and up .

Charging the Battery

To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously.

CO PY

14

Charging the Battery

Approximate Number of Shots That Can Be Taken

The number of shots that can be taken is based on the Camera & Imaging Products Association (CIPA) measurement standard.

Under some shooting conditions, fewer shots can be taken.

Battery Charge Indicator An icon or message will appear on the screen indicating the batterys charge state.

Charge the battery on the day, or the day before, it will be used. Charged batteries continue to discharge naturally even if they are not used.

How to store the battery for long periods. Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time (about a year) without depleting it may shorten its life span or affect its performance.

The battery charger can also be used when abroad. The charger can be used in regions that have 100 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use devices, such as electrical transformers for foreign travel, because they will cause malfunctions.

The battery may develop a bulge. This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk.

If the battery is quickly depleted even after charging, it has reached the end of its life span. Purchase a new battery.

Number of shots 200 Playback Time (Hours) 5 hours

Display Summary

Good.

Slightly depleted, but sufficient.

(Blinking red) Nearly depleted.

Change the battery pack. Depleted. Recharge the battery.

Using the battery and charger effectively

Attach the cover to a charged battery so that the mark is visible.CO PY

15

Insert the included battery and a memory card into the camera.

Check the cards write-protect tab. If the memory card has a write-protect tab,

you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click.

Open the cover. Slide the cover , and open it .

Insert the battery. Insert the battery as shown until it locks

into place with a click. Be sure to insert the battery in the correct

direction or it will not properly lock into place.

Insert the memory card. Insert the memory card as shown until it

locks into place with a click. Be sure the memory card is oriented

correctly. Inserting the memory card in the wrong direction could damage the camera.

Inserting the Battery and Memory Card

Terminals

Terminals

CO PY

16

Inserting the Battery and Memory Card

Close the cover. Close the cover , and slide it until it

locks into place with a click.

Removing the Battery and Memory Card Remove the battery. Open the cover and press the battery lock

in the direction of the arrow. The battery will pop up.

Remove the memory card. Push the memory card in until you hear a

click, then slowly release it. The memory card will pop up.

CO PY

17

Inserting the Battery and Memory Card

Approximate Number of Shots per Memory Card

Values are based on the default settings. The number of shots that can be taken will vary depending on camera settings, the

subject and the memory card used.

You can check the number of shots that can be taken when the camera is in a Shooting Mode (p. 24).

Compatible Memory Cards SD memory cards SDHC memory cards MultiMediaCards MMCplus memory cards HC MMCplus memory cards

SD and SDHC memory cards have a write-protect tab. If this tab is in the locked position, [Card locked!] will appear on the screen and you will not be able to take or erase images.

Memory Card 2 GB 8 GB Number of shots 626 2505

Can you check the number of shots that can be taken?

What is the write-protect tab?

Number of shots that can be taken

CO PY

18

The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them.

Turn on the camera. Press the power button.

The Date/Time screen will appear.

Set the date and time. Press the qr buttons to select an option. Press the op buttons or turn the dial

to set a value.

Make the setting. Press the m button.

Once the date and time have been set, the Date/Time screen will close.

Pressing the power button will turn off the camera.

Set the correct date and time. If you have not set the date and time, the Date/ Time screen will appear each time you turn on the camera.

If you select in Step 2 and press the op buttons or turn the dial and select , you will set the time to daylight savings (1 hour ahead).

Setting the Date and Time

Reappearing Date/Time screen

Daylight saving time settings

CO PY

19

Setting the Date and Time

Changing the Date and Time You can change the current date and time settings.

Display the menus. Press the n button.

Select [Date/Time] in the 3 tab. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Date/Time], then press the m button.

Change the date and time. Follow Steps 2 and 3 on p. 19 to adjust

the setting. To close the menus, press the n

button.

The camera has a built-in date/time battery (backup battery) that allows the date/time settings to be retained about three weeks after the battery pack has been removed.

By inserting a charged battery or connecting an AC adapter kit (sold separately, p. 40) the date/time battery can be charged in about 4 hours even if the camera is not turned on.

If the date/time battery is depleted, the Date/Time menu will appear when you turn the camera on. Follow the steps on p. 19 to set the date and time.

Date/Time battery

CO PY

20

You can change the language displayed in the LCD monitor menus and messages.

Set the playback mode. Press the 1 button.

Display the settings screen. Press and hold the m button , then

immediately press the n button .

Set the display language. Press the opqr buttons or turn the

dial to select a language, then press the m button. Once the display language has been set, the language menu will close.

The clock will display if too much time passes between pressing the m button and the n button in Step 2. If the clock appears, press the m button to remove the clock and repeat Step 2.

Setting the Display Language

What if the clock appears when the m button is pressed?

You can also change the display language by pressing the n button, selecting the 3 tab, and selecting the [Language] menu item.

CO PY

21

Before you use a new memory card or one that has been used in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card.

Display the menus. Press the n button.

Select [Format]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Format], then press the m button.

Format the memory card. Press the qr buttons or turn the dial

to select [OK], then press the m button. The memory card will be formatted. When formatting has finished, the menu screen will reappear.

Formatting Memory Cards

Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.

The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card.

CO PY

22

The shutter button has two stops. To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then take the shot.

Press halfway (lightly to the first stop).

The camera focuses and automatically selects the necessary settings for shooting, such as the brightness. When the camera focuses, it will beep twice and the indicator will light green.

Press fully (to the second stop). The camera plays the shutter sound and takes the shot.

Since the shot is being taken while the shutter sound plays, be careful not to move the camera.

Since the time required to shoot differs according to the scene you want to take, the length of the shutter sound may change.

If the camera or subject moves while the shutter sound is playing, the recorded image may be blurry.

Pressing the Shutter Button

Does the length of the shutter sound change?

If you just press the shutter button fully without pausing halfway, the image may not be in focus.

CO PY

23

Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels.

Turn on the camera. Press the power button.

The start-up sound will play, and the startup screen will appear.

Pressing the power button again will turn the camera off.

Select the A mode. Set the mode switch to A. When you point the camera toward the

subject, the camera will make a slight noise as it determines the scene. The camera focuses on the subject it judges to be the main subject, and displays the icon for the determined scene in the upper right of the screen. When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces. Even if the detected faces move, the camera will follow the faces within a certain range.

Compose the shot. Moving the zoom lever toward i will

zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller.

A Taking Pictures

CO PY

24

A Taking Pictures

Focus. Press the shutter button halfway to focus.

When the camera focuses, it will beep twice and the indicator will light green (orange when the flash will fire). Green AF frames appear where the subject is in focus. Several AF frames will appear when the camera focuses on more than one point.

Shoot. Press the shutter button fully.

The camera will play the shutter sound and shoot. The flash will automatically fire in low light conditions. The indicator will blink green while the image is recorded to the memory card. The image will appear on the screen for about two seconds.

You can take a second picture even while an image is displayed by pressing the shutter button.

The camera does not play any sounds? Pressing the p button while turning on the camera power will turn off all sounds except for warning sounds. To turn the sounds on, press the n button, select the 3 tab, and then select [Mute]. Use the qr buttons to select [Off].

The image comes out dark even if the flash fired when shooting? The subject is too far away for the flash to reach. Shoot within the effective flash range of approximately 30 cm 4.0 m (12 in. 13 ft.) at maximum wide angle, and approximately 30 cm 2.0 m (12 in. 6.6 ft.) at maximum telephoto.

AF Frames

What if...

CO PY

25

A Taking Pictures

The indicator blinks green and the camera beeps once when the shutter button is pressed halfway? Your subject is too close. When the camera is at maximum wide angle, move about 2 cm (0.79 in.) or more away from your subject and shoot. Move about 30 cm (1.0 ft.) or more away when the camera is at maximum telephoto.

The lamp lights when the shutter button is pressed halfway. To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas.

The h icon blinks when you try to take an image? The flash is charging. You can shoot when recharging ends.

Scene Icons The camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color.

* Displays when the camera is attached to a tripod.

Background

Subject

Bright Including Blue Skies Sunsets

Dark

Backlit Backlit When Using Tripod

People *

Subjects Other Than People Landscapes

*

Close Subjects

Icon Background Color Gray Light Blue Orange Dark Blue

Under certain conditions, the icon that displays may not match the actual scene. Especially when there is an orange or blue colored background (a wall for example), U or the Blue Skies icons may appear and it may not be possible to shoot with the appropriate color. If this happens, try shooting in the G mode (p. 66).

CO PY

26

You can view your images on the screen.

Select the playback mode. Press the 1 button.

The last image you took will appear.

Select an image. Pressing the q button will cycle through

the images in reverse order. Pressing the r button will cycle through

the images in the order they were taken. If you hold the qr buttons pressed, the

images advance continuously. Turning counter-clockwise displays

images in the reverse order they were taken, while turning it clockwise displays images in the order they were taken.

Pressing the 1 button while the lens is extended will cause the shooting screen to reappear.

The lens will retract after approximately 1 minute elapses. If you press the 1 button with the lens retracted, the power will turn off.

If you hold the q button pressed and tilt the camera as shown in the illustration, the images advance quickly. However, the images appear coarse. When you hold the r button pressed tilt the camera to the opposite direction.

1 Viewing Images

Switching images quickly

CO PY

27

1 Viewing Images

Active Display If you tilt the camera gently from your wrist as shown in the illustration below, you can switch the images you are viewing.

Depending on how you tilt the camera, images may not switch. Be careful not to accidentally bang people. Be sure to hold the camera with the strap around your wrist to avoid

dropping it.

Switch to the next image

Hold the camera without releasing the shutter button.

Switch to the previous image

CO PY

28

You can select and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image.

Select the playback mode. Press the 1 button.

The last image you took will appear.

Select an image to erase. Press the qr buttons or turn the dial

to display an image to erase.

Erase the image. Press the m button, and press the op

buttons or turn the dial, then press the m button again. [Erase?] appears on the screen.

Press the qr buttons or turn the dial to select [Erase], then press the m button. The displayed image will be erased.

To exit instead of erasing, press the qr buttons or turn the dial to select [Cancel], then press the m button.

Erasing Images

CO PY

29

You can easily print the images you have taken if you connect the camera to a PictBridg compliant printer (sold separately).

Items to Prepare Camera and PictBridge compliant printer (sold separately) Interface cable supplied with the camera

Turn off the camera and printer. Connect the camera to the printer. Open the cover, and insert the small end

of the plug firmly into the camera terminal in the direction shown.

Insert the cables larger plug into the printer. For connection details, refer to the user guide provided with the printer.

Turn on the printer.

Turn on the camera. Press the 1 button to turn on the camera.

Select an image to print. Press the qr buttons or turn the dial

to select an image.

Printing Images

CO PY

30

Printing Images

Print images. Press the m button, and use the op

buttons or turn the dial to select c, then press the m button. The print selection screen appears.

Press the op buttons to select [Print], then press the m button. Printing will start.

If you want to print additional images, repeat Steps 5 and 6 after printing has completed.

After printing has completed, turn off the camera and printer, and unplug the interface cable.

Canon-Brand PictBridge Compliant Printers (Sold Separately) By connecting your camera to one of the Canon-brand PictBridge compliant printers below, you can print your images without having to use a computer.

For more information, visit your nearest Canon retailer.

Refer to the Personal Printing Guide for details on the best ways to print.

Compact Photo Printers (SELPHY Series)

Inkjet Printers (PIXMA series)

CO PY

31

The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button. If you continue shooting for a long time, the camera may become warm. This is not a malfunction.

Set the mode switch to E.

Select the E mode. Press the m button, and use the op

buttons or turn the dial to select E, then press the m button again.

Press the op buttons or turn the dial to select E, then press the m button.

Compose the shot. Moving the zoom lever toward i will

zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller.

Focus. Press the shutter button halfway to focus.

When the camera focuses, it will beep twice and the indicator will light green.

E Shooting Movies

Shooting Time

CO PY

32

E Shooting Movies

Shoot. Press the shutter button fully.

The camera will start shooting the movie, and [ Rec] and the elapsed time will appear on the screen.

Once shooting begins, take your finger off the shutter button.

If you change the composition of your shot during shooting, the focus will stay the same, but the brightness and tone will automatically adjust.

Do not touch the microphone while shooting.

Do not press any buttons other than the shutter button. Otherwise, the sound the buttons make will be recorded in the movie.

Stop shooting. Press the shutter button fully again.

The camera will beep once and stop shooting the movie. The indicator will blink green, and the movie will record to the memory card. Shooting will automatically stop when the memory card fills.

Estimated Shooting Times

Shooting times are based on default settings. Shooting time can be checked on the screen in Step 2. Recording will automatically stop when either the clip file size reaches 4 GB or the

recording time reaches approximately 29 minutes and 59 seconds.

Elapsed Time

Microphone

Memory Card 2 GB 8 GB Shooting Time 10 min. 53 sec. 43 min. 32 sec.

CO PY

33

You can view your movies on the screen.

Select the playback mode. Press the 1 button.

The last image you shot will appear. appears on movies.

Select a movie. Press the qr buttons or turn the dial

to select a movie, then press the o button. The movie control panel will appear on the screen.

Play the movie. Press the qr buttons or turn the dial

to select , then press the m button. The movie will play.

You can pause/resume the movie by pressing the m button again.

Press the op buttons to adjust the volume.

After the movie finishes, appears.

1 Viewing Movies

When watching a movie on a computer, frames may drop, it may not play smoothly, and the audio may stop suddenly depending on the computers capabilities. If you use the supplied software to copy the movie back onto the memory card, you can play back the movie smoothly. For enhanced playback you can also connect the camera to a TV.

CO PY

34

You can use the included software to transfer your camera images to a computer.

System Requirements Even though these are recommended system requirements, not all computer functions can be guaranteed.

Windows

Macintosh

Items to Prepare Camera and computer DIGITAL CAMERA Solution Disk supplied with the camera (p. 2) Interface cable supplied with the camera (p. 2)

OS Windows Vista (including Service Pack 1) Windows XP Service Pack 2, Service Pack 3

Computer model The above OS should be pre-installed on computers with built-in USB ports.

CPU Viewing images Pentium 1.3 GHz or higher Viewing movies Core2 Duo 1.66 GHz or higher

RAM Viewing images Windows Vista: 1 GB or more Windows XP: 512 MB or more

Viewing movies 1 GB or more Interface USB Free Hard Disk Space Canon Utilities ZoomBrowser EX: 200 MB or more

PhotoStitch: 40 MB or more Display 1,024 768 pixels or higher

OS Mac OS X v10.4 v10.5 Computer model The above OS should be pre-installed on computers with built-in

USB ports. CPU Viewing images PowerPC G4/G5 or Intel Processor

Viewing movies Core Duo 1.66 GHz or higher RAM Viewing images 512 MB or more

Viewing movies 1 GB or more Interface USB Free Hard Disk Space Canon Utilities ImageBrowser: 300 MB or more

PhotoStitch: 50 MB or more Display 1,024 768 pixels or higher

Transferring Images to a Computer

CO PY

35

Transferring Images to a Computer

36

Preparations Windows XP and Mac OS X (v10.4) are used for these explanations.

Windows

Place the DIGITAL CAMERA Solution Disk in the computers CD-ROM drive.

Begin installation. Click [Easy Installation] and follow the

onscreen instructions to proceed with the installation.

When the install finishes, click [Restart] or [Finish].

Remove the CD-ROM. Remove the CD-ROM when your desktop

screen appears.

Macintosh Place the CD-ROM in the computers

CD-ROM drive and double-click the icon.

Click [Install], and follow the onscreen instructions to proceed with the installation.

Connect the camera to the computer. Turn off the camera. Open the cover, and insert the cables

small plug into the camera terminal in the direction as shown.

Insert the cables larger plug into the computers USB port. For connection details, refer to the user guide provided with the computer.

CO PY

Transferring Images to a Computer

Turn on the camera. Press the 1 button to turn on the camera.

Open CameraWindow.

Windows Select [Canon CameraWindow] and click

[OK]. CameraWindow will appear.

If CameraWindow does not appear, click the [Start] menu and select [All Programs] or [Programs], followed by [Canon Utilities] [CameraWindow] [CameraWindow] [CameraWindow].

Macintosh CameraWindow will appear when you establish a connection between the camera and computer.

If CameraWindow does not appear, click the [CameraWindow] icon on the Dock (the bar which appears at the bottom of the desktop).

Transferring Images to a Computer Click [Transfer Untransferred Images].

All images not previously transferred will transfer to the computer.

After the transfer finishes, turn off the camera and unplug the cable.

For further operations, refer to the Software Starter Guide.

Images transferred to the computer will be sorted by date and saved in separate folders in the My Pictures folder for Windows or the Pictures folder for Macintosh.

CO PY

37

Accessories

Wrist Strap WS-DC7

Interface Cable IFC-400PCU*1

DIGITAL CAMERA Solution Disk

AV Cable AVC-DC400*1

AC Adapter Kit ACK-DC10

Compact Power Adapter CA-DC10

Supplied with Camera

*1 Also available for purchase separately. *2 See the user guide supplied with the printer for more information on the printer and

interface cables.

Battery Pack NB-4L (with Terminal Cover)*1

Battery Charger CB-2LV/CB-2LVE*1

Power Cord DC Coupler DR-DC10

Waterproof Case WP-DC32

CO PY

38

Accessories

Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.

High-Power HF-DC1

Inkjet Printers*2

(PIXMA series)

Compact Photo Printers*2

(SELPHY series)Card Reader

Windows/ Macintosh

Video IN Terminal

Audio IN Terminal TV/Video

Memory Card

High-Definition TV HDMI Cable HTC-100 CO

PY

39

The following camera accessories are sold separately. Some accessories are not sold in some regions, or may no longer be available.

Power Supplies AC Adapter Kit ACK-DC10

This kit lets you power the camera using household power. Recommended for powering the camera for an extended period of time or when connecting to a computer. Cannot be used to charge the battery inside the camera.

Battery Charger CB-2LV/CB-2LVE An adapter for charging Battery Pack NB-4L.

Battery Pack NB-4L Rechargeable lithium-ion battery.

The charger can be used in regions that have 100 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use devices such as electrical transformers for foreign travel because they will cause malfunctions.

Other Accessories HDMI Cable HTC-100

Use this cable to connect the camera to the HDMI terminal on a high-definition TV set.

Waterproof Case WP-DC32 Installing the camera into this waterproof case lets you take underwater shots at depths down to 40 meters (130 feet), or take worry-free pictures in the rain, at the beach, or on the ski slopes.

High-Power Flash HF-DC1 This attachable supplementary flash can illuminate subjects that are too distant for the light from the built-in flash to reach.

The battery charger can also be used when abroad.

Separately Sold Accessories

OP Y

40

Learning More This chapter explains the parts of the camera and what displays on the screen, as well as the basic operating instructions.

2

CO PY

41

Mode Switch Use the mode switch to change shooting modes.

Lamp (AF Assist Beam (p. 130)/ Red-Eye Reduction Lamp (p. 131)/ Self-Timer Lamp (p. 64)) Lens Zoom Lever Shooting: i (Telephoto)/ j (Wide Angle) (p. 24) Playback: k (Magnify)/ g (Index) (p. 98)

Shutter Button (p. 23) Power Button Mode Switch Microphone (p. 33) Flash (p. 59) Speaker Tripod Socket Memory Card / Battery Cover (p. 16) Strap Mount (p. 13)

Components Guide

Movie Mode For shooting movies (p. 32).

Auto Mode You can leave it to the camera to select settings (p. 24).

Shooting Mode You can leave it to the camera to select the best settings for the scene (p. 56) or select settings yourself to take various types of pictures (pp. 55, 65, 79).

CO PY

42

Components Guide

Control Dial Turning the control dial allows you to perform operations such as selecting items or switching images.

If you touch the control dial in shooting mode, a button description displays on the screen. When you switch to playback mode, a guidance will display for a few seconds.

1 Button When the lens is extended, you can use the 1 button to switch between the shooting and playback modes. When the lens is retracted, you can use it to turn the camera on and off in playback mode.

Screen (LCD Monitor) (p. 44) Indicator (p. 46) 1 (Playback) Button (pp. 27, 134) HDMI Out Mini Terminal A/V OUT (Audio/Video Output) and DIGITAL Terminal n Button (p. 48) Q (Self-Timer) (pp. 63, 64, 76, 77)/ o Button

e (Macro) (p. 68)/u (Infinity) (p. 67)/ q Button m FUNC./SET (Function/Set) Button (p. 47) h (Flash) (p. 67)/ r Button l (Display) Button (pp. 44, 45)/ p Button Control Dial (p. 43)

Lens extended

Lens retractedShooting

mode Playback

mode Turning

the Camera Off1 1

CO PY

43

44

Shooting (Information Display)

* : Standard, : Held vertically When shooting, the camera detects if it is held vertically or horizontally, and adjusts settings accordingly for the best shot. It also detects orientation during playback, so you can hold the camera in either orientation and it will automatically rotate images for correct viewing. This function may not operate correctly when the camera is pointed straight up or down.

Switching the Display You can change the display using the p button.

Battery Charge Indicator (p. 15) Camera Orientation* Drive Mode (pp. 63, 64, 74, 77) My Colors (p. 75) White Balance (p. 73) i-Contrast (p. 85) Metering Modes (p. 83) Compression (Image Quality) (p. 70)/ Recording Pixels (p. 70)

Still Images: Recordable shots (p. 18) Movies: Remaining Time (p. 33) Disp. Overlay (p. 132) AF Frame (p. 25), AE Point Frame (p. 83) Digital Zoom Magnification (p. 60), Digital Tele-Converter (p. 61) AF Lock (p. 82) Macro (p. 68), Infinity (p. 67) Shooting Mode

Flash Mode (pp. 59, 67) Red-Eye Correction (p. 86) Date Taken/Recorded (p. 62) ISO Speed (p. 72) Image Stabilizer (p. 133) Exposure Compensation (p. 74) Aperture Value Shutter Speed AE Lock (pp. 83, 93), FE Lock (p. 84) Time Zone (p. 127) Self-Timer (pp. 63, 64, 76, 77)

Information Displayed on the Screen

No Information Display Information Display

CO PY

Information Displayed on the Screen

Playback (Detailed Information Display)

Switching the Display You can change the display using the p button.

Print List (p. 120) My Category (p. 112) Shooting Mode Shutter Speed Exposure Compensation (p. 74) White Balance (p. 73) Histogram (p. 46) Image Editing (pp. 114 119) Compression (Image Quality) (p. 70), (Movies) (p. 92)

Recording Pixels (p. 70) Metering Modes (p. 83) Battery Charge Indicator (p. 15) Folder Number - File Number (p. 128) Displayed Image Number /Total Number of Images ISO Speed (p. 72) Aperture Value, Image Quality (Movies) (p. 92) i-Contrast (p. 118) Flash (p. 67)

Macro (p. 68), Infinity (p. 67) File Size (pp. 70, 92) Still Images: Recording Pixels (p. 70) Movies: Movie Length (p. 93) Protect (p. 110) My Colors (p. 75) Red-Eye Correction (p. 119) Shooting Date and Time (p. 62)

Focus Check Display (p. 103)

Detailed Information Display

No Information Display

Simple Information Display

You can also switch the display by pressing the p button while the image displays shortly after shooting. However, the Simple Information will not display. You can set the display that displays first. Press the n button to select the 4 tab. Then set [Review Info].

CO PY

45

Information Displayed on the Screen

Display in Dark Conditions during Shooting The display automatically brightens when shooting in dark conditions, allowing you to check the composition (Night Display function). However, the brightness of the image on the screen, and the brightness of the actual image recorded may be different. Screen noise may appear and the movement of the subject may appear somewhat jagged on the screen. This has no effect on the recorded image.

Overexposure Warning during Playback In Detailed Information Display (p. 45), overexposed areas of the image flash on the screen.

Histogram during Playback The graph that appears in Detailed

Information Display (p. 45) is called the histogram. The histogram shows the distribution and amount of brightness of an image. When the graph approaches the right side, the image is bright, but when it approaches the left side, the image is dark, and in this way you can judge the exposure.

The indicator on the back of the camera (p. 43) will light or blink under the following conditions.

BrightDark

High

Low

Colors Status Operation Status

Green Lights Shooting preparation complete (p. 24)/Display Off (p. 126) Blinks Recording/reading/transmitting image data (p. 24)

Orange Lights Shooting preparation complete (flash on) (p. 24) Blinks Camera shake warning (p. 59)

When the indicator blinks green, data is being recorded to/read from the memory card or various information is being transmitted. Do not turn off the power, open the memory card slot/battery cover, shake or jolt the camera. These actions may corrupt the image data or cause the camera or memory card to malfunction.

Indicator CO PY

46

Commonly used shooting functions can be set with the FUNC. menu. The menu and menu items differ depending on the shooting mode (p. 144). You can also use the FUNC. menu in the playback mode.

Display the FUNC. menu. Press the m button.

Select a menu item. Press the op buttons or turn the dial

to select a menu item, then press the m button.

Depending on the menu, the screen may switch. Select a menu item and make the setting.

Select an option. Press the op buttons or turn the dial

to select an option. To return to the menu, press the q button.

Make the setting. Press the m button.

The shooting screen will reappear and the setting you selected will display on the screen.

m FUNC. Menu Basic Operations

Menu Items Selectable Options

CO PY

47

Various functions can be set from the menus. The menu items are organized under tabs, such as for shooting (4) and playback (1). The menu items differ depending on the mode (pp. 146 149).

Display the menu. Press the n button.

Select a tab. Press the qr buttons, or move the zoom

lever (p. 42) left or right to select a tab (category).

Select a menu item. Press the op buttons or turn the dial

to select a menu item. Some items require you to press the m

button to display a submenu in which you change the setting.

Select an option. Press the qr buttons to select an option.

Make the setting. Press the n button. The standard screen will reappear.

n Basic Operations

CO PY

48

You can silence or adjust the volume of camera sounds.

Muting Sounds Display the menu. Press the n button.

Select [Mute]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Mute], then use the qr buttons to select [On].

Adjusting the Volume Display the menu. Press the n button.

Select [Volume]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Volume], then press the m button.

Change the volume. Press the op buttons or turn the dial

to select an item, then use the qr buttons to adjust the volume.

Changing the Sound Settings

CO PY

49

The screen brightness can be changed in two ways.

With the n Button Display the menu. Press the n button.

Select [LCD Brightness]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [LCD Brightness].

Change the brightness. Press the qr buttons to change the

brightness. Press the n button again to complete

the setting.

With the p Button Press the p button for more than one

second. The screen increases to maximum brightness regardless of the setting in the 3 tab.

Pressing the p button again for more than one second will return the screen to the original brightness.

Changing the Screen Brightness

The next time you turn on the camera, the screen will be at the brightness setting selected in the 3 tab.

When you have set the brightness to its highest setting in the 3 tab, you cannot change the brightness with the p button.

CO PY

50

When you have mistakenly changed a setting, you can reset the camera to the default settings.

Display the menu. Press the n button.

Select [Reset All]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Reset All], then press the m button.

Reset the settings. Press the qr buttons or turn the dial

to select [OK], then press the m button. The camera will reset to the default settings.

The [Date/Time] (p. 19) in the 3 tab, [Language] (p. 21), [Video System] (p. 105), [Time Zone] (p. 127), the image registered as [Start-up Image] (p. 135).

The saved data for custom white balance (p. 73). Colors that were selected in Color Accent (p. 88) or Color Swap (p. 89).

Returning the Camera to Default Settings

Are there functions that cannot be reset?CO PY

51

Perform low level formatting when you think that the recording/reading speed of a memory card has dropped. Low level formatting a memory card completely erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before low level formatting the memory card.

Display the menu. Press the n button.

Select [Format]. Press the qr buttons to select the 3 tab. Press the op buttons or turn the dial

to select [Format], then press the m button.

Perform the low level format. Press the op buttons or turn the dial

to select [Low Level Format], then use the qr buttons to display .

Press the opqr buttons or turn the dial to select [OK], then press the m button. Low level formatting starts.

When the [Memory card error] message appears, or when the camera does not work correctly, low level formatting the memory card may solve the problem. Copy the images from the memory card to a computer or other device before low level formatting.

Low Level Memory Card Formatting

About low level formatting

Low level formatting may take longer than standard formatting (p. 22), since all recorded data are erased.

You can stop a low level format of a memory card by selecting [Stop]. When stopping low level formatting, the data will be erased but the memory card can be used without problem.

CO PY

52

To save battery power, the camera shuts down automatically when it is not operated for a certain time.

Power Saving during Shooting The monitor will turn off approximately 1 minute after the camera is last operated. After about 2 more minutes, the lens will retract and the power will turn off. When the monitor has turned off but the lens has not retracted yet, pressing the shutter button halfway (p. 23) turns on the monitor and shooting can continue.

Power Saving during Playback The power will turn off approximately 5 minutes after the camera is last operated.

You can check the current time.

Hold the m button pressed. A screen like that on the left appears showing the current time.

You can change the display color by changing the cameras orientation, pressing the qr buttons or turning the dial.

Press the m button to cancel the clock display.

You can turn off the Power Saving Function (p. 126). You can adjust the time before the monitor turns off (p. 126).

Power Saving Function (Auto Power Down)

Clock Functions

Press and hold the m button, then press the power button to display the clock.

CO PY

53

CO PY

54

Shooting in Special Conditions and Commonly

Used Functions This chapter explains how to shoot in different conditions, as well as how to use other common functions, such as the flash and self-timer.

When you select a mode that matches a particular set of conditions, the camera will automatically select any necessary settings. All you need do is press the shutter button to take an optimized picture.

This chapter assumes the mode switch is set to 4 or A.

3

CO PY

55

The camera will select the necessary settings for the conditions in which you wish to shoot when you select the matching mode.

Set the mode switch to 4 (p. 42).

Select the desired shooting mode. After pressing the m button, press the op buttons or turn the dial to select G, then press the m button.

Press the op buttons or turn the dial to select the desired mode, then press the m button.

Shoot.

I Take portraits (Portrait) Produces a soft effect when

photographing people.

F Take snapshots at night (Night Snapshot) Lets you take beautiful snapshots of

people against city nightscapes or night backgrounds.

If you hold the camera firmly, you can take pictures with reduced camera shake, even without a tripod.

V Take shots of kids and pets (Kids&Pets) Lets you capture subjects that move

around, such as children and pets, without missing photo opportunities.

Shooting in Various Conditions

CO PY

56

Shooting in Various Conditions

H Take indoor shots (Indoor) Lets you shoot indoors with natural colors.

U Shoot sunsets (Sunset) Lets you take shots of sunsets in vivid

colors.

t Take shots of fireworks (Fireworks) Lets you take shots of fireworks in vivid

colors.

w Take shots of people at the beach (Beach) Lets you take bright shots of people on

sandy beaches where the reflected sunlight is strong.

S Shoot underwater (Underwater) Lets you shoot underwater with

Waterproof Case WP-DC32 (sold separately).

y Take shots of aquatic life in an aquarium (Aquarium) Lets you take natural-colored shots of

aquatic life in indoor aquariums.

O Take shots of foliage (Foliage) Lets you shoot trees and leaves, such as

new growth, autumn leaves or blossoms, in vivid colors.

CO PY

57

Shooting in Various Conditions

P Take shots of people in snow (Snow) Lets you take bright, natural-colored shots

of people against snowy backgrounds.

Z Shoot using high ISO speed (ISO3200) Sets the ISO speed to 3200, and lets you

shoot without camera shake or subject blurring even in low light conditions.

Recording pixels are set to (1600 1200 pixels, p. 70).

In F, V, H, S or y mode, images may appear coarse because the ISO speed (p. 72) is increased to match the shooting conditions.

In t mode, attach the camera to a tripod to prevent the camera from moving and blurring the image. Additionally, you are recommended to set [IS Mode] to [Off] (p. 133).

In Z mode, images may appear coarse.

CO PY

58

You can shoot with the flash turned off.

Press the r button.

Select !. Press the qr buttons or turn the dial

to select !, then press the m button. ! will appear on the screen.

Follow the steps above to return the setting to .

When you press the shutter button halfway in low light conditions where camera shake is likely, the indicator will blink orange and a flashing will appear on the screen. Attach the camera to a tripod to prevent it from moving.

! Turning the Flash Off

What if the indicator blinks orange and a flashing appears?

CO PY

59

You can use the digital zoom to zoom up to a maximum of 16x and capture subjects that are too far away for the optical zoom (p. 24) to enlarge. The images may appear coarse, however, depending on the recording pixel setting (p. 70) and the zoom factor used.

Move the zoom lever toward i. Hold the lever until zooming stops.

When you release the zoom lever, the largest possible zoom factor without image deterioration will appear.

Move it toward i again. The digital zoom will further zoom in on the subject.

Zoom Factors at which Images Deteriorate

To turn off the digital zoom, press the n button, select the 4 tab, and select [Digital Zoom] and the [Off] option.

Zooming in More Closely on Subjects (Digital Zoom)

Turning off the digital zoom

The focal length when using digital zoom is 112 448 mm (35mm film equivalent).

: No image deterioration (zoom factor appears white)

: Image deterioration (zoom factor appears blue)

: Maximum zoom factor without deterioration (Safety Zoom)

Recording Pixels Optical Zoom Digital Zoom

4.0x

4.9x

6.2x

10x

16x

CO PY

60

Zooming in More Closely on Subjects (Digital Zoom)

Digital Tele-Converter The focal length of the lens can be increased by an equivalent of 1.5x or 2.0x. This enables a faster shutter speed and less chance of camera shake than the zoom (including digital zoom) used by itself at the same zoom factor. The images may appear coarse, however, depending on the combination of recording pixel (p. 70) and digital tele-converter settings used.

Select [Digital Zoom]. Press the n button. Select the 4 tab, then press the op

buttons to select [Digital Zoom].

Accept the setting. Press the qr buttons to select [1.5x] or

[2.0x]. Pressing the n button will restore the

shooting screen. The view will be enlarged, and the zoom factor will display on the screen.

To return to standard digital zoom, select [Digital Zoom] and the [Standard] option.

Combinations that Cause Image Deterioration Using [1.5x] at a recording pixel setting of or will cause image

deterioration (the zoom factor will display in blue). Using [2.0x] at a recording pixel setting of , or will cause image

deterioration (the zoom factor will display in blue).

The respective focal lengths when using [1.5x] and [2.0x] are 42 168 mm and 56 224 mm (35mm film equivalent).

The digital tele-converter cannot be used together with the digital zoom.

CO PY

61

You can insert the shooting date and time in the lower right corner of an image. Once inserted, however, they cannot be deleted. Be sure to check beforehand that the date and time are correctly set (p. 19).

Select [Date Stamp]. Press the n button and select the 4

tab, then select [Date Stamp] and use the qr buttons to select [Date] or [Date & Time].

Press the n button again to accept the setting. [DATE] will appear on the screen.

Shoot. You can insert the shooting date and time in the images lower right corner.

To restore to the original setting, select [Off] in Step 1.

Use the DPOF print settings (p. 121) to print. Use the included software to print.

Refer to the Software Starter Guide for details. Connect the camera to a printer to print.

Refer to the Personal Printing Guide for details.

Inserting the Date and Time

Inserting and printing the date and time in images which do not have an embedded date and time

CO PY

62

The self-timer can be used to shoot a group photo that includes the camera operator. The camera will activate approximately 10 seconds after the shutter button is pressed.

Press the o button.

Select . Press the op buttons or turn the dial

to select , then press the m button. Once set, will appear.

Shoot. Press the shutter button halfway to focus

on the subject, then press it fully. When the self-timer starts, the lamp blinks and the self-timer sound plays. Two seconds before the shutter releases, the lamp and sound speed up (the lamp remains lit when the flash will fire).

To restore the original setting, select in Step 2.

Using the Self-Timer

You can change the delay time and number of shots (p. 77).

CO PY

63

Once you compose the shot, such as for a group photo, and press the shutter button, the camera will take three shots in a row two seconds after it detects your face (p. 80) when you enter the composition.

Select ". Follow Step 2 on p. 63 and select ".

Compose the shot and press the shutter button halfway. Make sure a green frame appears on the

face of the focused subject and white frames appear on other faces.

Press the shutter button fully. The camera will enter shooting stand-by, and [Look straight at camera to start count down] will appear on the screen. The lamp will blink and the self-timer sound will play.

Join the subjects and look at the camera.

When the camera detects a new face, the lamp and sound will speed up (the lamp remains lit when the flash will fire), and two seconds later the shutter will release. The second and third shots will continue in succession.

To restore the original setting, select in Step 2 on p. 63.

Even if your face is not detected after joining the subjects, the shutter will release approximately 30 seconds later.

For the screen in Step 1, press the n button, then press the qr buttons to change the number of shots. Press the m button to accept the setting.

" Using the Face Self-Timer

What if a face is not detected?

Changing the number of shots

CO PY

64

Selecting Settings Yourself In this chapter you will learn how to use the various functions in G mode to progressively advance your shooting skills.

This chapter assumes that the mode switch is set to 4 and the camera is in G mode.

G stands for Program AE. Before attempting to shoot using a function explained in this chapter in

modes other than G mode, check if the function is available in those modes (pp. 144 147).

4

CO PY

65

You can select the settings for various functions to suit your preferences. AE stands for Auto Exposure.

Set the mode switch to 4 (p. 42).

Select G. Select G in Step 1 2 on page 47 and

press the m button.

Adjust the settings according to your purposes (pp. 67 77). Shoot.

If a correct exposure cannot be obtained when pressing the shutter button halfway, the shutter speed and aperture value display in red. Try the following settings to obtain the correct exposure. Turn on the flash (p. 67) Select a higher ISO speed (p. 72)

G Shooting in Program AE

What if the shutter speed and aperture value are displayed in red?

CO PY

66

You can make the flash fire every time you shoot. At maximum wide angle, the flash range is approximately 30 cm 4.0 m (12 in. 13 ft.), and at maximum telephoto, it is 30 cm 2.0 m (12 in. 6.6 ft.).

Select h. After pressing the r button, press the qr

buttons or turn the dial to select h, then press the m button. Once set, h will appear.

You can shoot landscapes and far away subjects. The focusing range is 3 m (9.8 ft.) and greater from the camera.

Select u. After pressing the q button, press the qr

buttons or turn the dial to select u, then press the m button. Once set, u will appear.

h Turning the Flash On

u Shooting Far Away Subjects (Infinity)

CO PY

67

You can shoot an object at a close distance or even shoot extreme close- ups of it. The possible shooting range is approximately 2 50 cm (0.8 in. 1.6 ft.) from the end of the lens when the zoom lever is moved to the maximum wide angle, and approximately 30 50 cm (12 in. 1.6 ft.) when the zoom lever is moved to the maximum telephoto side.

Press the q button.

Select e. Press the qr buttons or turn the dial

to select e, then press the m button. e will appear on the screen.

To restore to the original setting, select .

You are recommended to attach the camera to a tripod and shoot in , to prevent the camera from moving and blurring the image (p. 76).

e Shooting Close-ups (Macro)

Using

The edges of the image may darken if the flash fires.

CO PY

68

You can zoom in on close subjects. The possible shooting range is approximately 2 10 cm (0.79 3.9 in.) from the end of the lens. However, you can zoom in even closer on the subject using the digital zoom. The digital zoom may cause images to appear coarse at some recording pixel settings (p. 70).

Set the mode switch to 4 (p. 42).

Select R. Select R in Step 1 3 on page 47 and

press the m button. The optical zoom will lock at the maximum wide angle.

Use the zoom lever to compose the shot.

The camera will zoom in and the zoom factor will appear.

Zoom Factors at which Images Deteriorate No image deterioration (zoom factor appears white) Image deterioration (zoom factor appears blue)

You are recommended to attach the camera to a tripod and shoot in , to prevent the camera from moving and blurring the image (p. 76).

R Zooming In on Close Subjects (Digital Macro)

Using CO PY

69

You can select the recording pixels (image size) from six settings.

Select the recording pixels. Press the m button and select ,

then press the m button.

Select an option. Press the op buttons or turn the dial

to select an option, then press the m button. The setting you selected will display on the screen.

You can select from the following two levels of image quality: (Fine), (Normal).

Select the compression ratio. Press the m button and select ,

then press the m button.

Select an option. Press the op buttons or turn the dial

to select an option, then press the m button. The setting you selected will display on the screen.

Changing the Recording Pixels

If you select , you cannot use the Digital Zoom (p. 60) or Digital Tele- Converter (p. 61).

Changing the Compression Ratio (Image Quality)

CO PY

70

Changing the Compression Ratio (Image Quality)

Approximate Values for Recording Pixels and Image Quality

The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings.

Approximate Values for Paper Size Suitable for sending images as e-mail

attachments. For printing on wide size paper.

Recording Pixels Compression Ratio

Single Image Data Size

(Approx. KB)

Number of Recordable Images

2 GB 8 GB

(Large) 12 M/4000 3000

3084 626 2505 1474 1280 5116

(Medium 1) 8 M/3264 2448

2060 930 3721 980 1920 7675

(Medium 2) 5 M/2592 1944

1395 1365 5457 695 2672 10679

(Medium 3) 2 M/1600 1200

558 3235 12927 278 6146 24562

(Small) 0.3 M/640 480

150 10245 40937 84 15368 61406

(Widescreen) 4000 2248

2311 830 3318 1105 1707 6822

A2

A3

5" 7" Postcard size 3.5" 5"

A4, Letter size

CO PY

71

Select the ISO speed. Press the m button and select ,

then press the m button. Press the op buttons or turn the dial

to select an option, then press the m button. Once set, the ISO speed will appear on the screen.

Approximate Values for ISO Speed

Lowering the ISO speed results in sharper images, but there may be an increased chance of image blurring in certain shooting conditions.

Raising the ISO speed results in a faster shutter speed, reducing camera shake and letting the flash reach greater distances to the subject. The images, however, will appear coarse.

Changing the ISO Speed

Automatically adjusts the ISO speed to the shooting mode and shooting conditions. Low

High

Fine weather conditions, outdoor shooting.

Cloudy, Twilight

Nightscapes, Dark interiors

Changing the ISO speed

When the camera is set to , you can press the shutter button halfway to display the automatically set ISO speed.

With ISO3200 you can set an even faster speed (p. 58).

CO PY

72

The white balance (WB) function sets the optimal white balance for natural looking colors.

Select the white balance. Press the m button and select ,

then press the m button.

Select an option. Press the op buttons or turn the dial

to select an option, then press the m button. The setting you selected will display on the screen.

Custom White Balance You can adjust the white balance to the light source at the shooting location. Make sure that you set the white balance under the lighting conditions of the shooting scene.

In Step 2 above, select . Make sure the entire screen is filled with

the white subject, then press the n button. The tint on the screen will change when a white balance data is set.

Adjusting the White Balance

Auto Automatically sets the optimal white balance for the shooting conditions.

Day Light Fine weather conditions, outdoor shooting

Cloudy Cloudy, shady, twilight conditions

Tungsten Tungsten, bulb-type (3-wavelength) fluorescent lighting

Fluorescent Warm-white fluorescent, cool-white fluorescent, warm-white-type (3-wavelength) fluorescent lighting

Fluorescent H Daylight fluorescent, daylight-type (3-wavelength) fluorescent lighting

Custom Manually sets a custom white balance.CO PY

73

You can adjust the standard exposure set by the camera in 1/3-stop increments in the range of 2 to +2.

Select the exposure compensation. Press the m button to select #, then

press the m button.

Adjust the brightness. While watching the screen, press the op

buttons or turn the dial to adjust the brightness and press the m button.

You can shoot continuously at about 0.8 images/second.

Select the drive mode. Press the m button to select , then

press the r button. Press the op buttons to select W, then

press the m button.

Shoot. As long as you hold the shutter button down, the camera will shoot successive images.

Adjusting the Brightness (Exposure Compensation)

W Continuous Shooting

Cannot be used with the self-timer (pp. 63, 64, 76, 77). For continuous shooting, the focus and exposure are locked when the

shutter button is pressed halfway. As the number of images increases, the shooting intervals may take

longer. If the flash fires, shooting intervals may take longer.

CO PY

74

You can change the tone of an image to sepia or black and white when shooting.

Select My Colors. Press the m button and select , then

press the m button.

Select an option. Press the op buttons or turn the dial

to select an option, then press the m button. The setting you selected will display on the screen.

After shooting, return the setting to .

Changing the Tone of an Image (My Colors)

My Colors Off

Vivid Emphasizes the contrast and color saturation for a vivid impression.

Neutral Tones down the contrast and color saturation for neutral hues.

Sepia Sepia tones.

B/W Black and white.

Positive Film Like the Vivid Red, Vivid Green or Vivid Blue effects, produces intense natural appearing colors like those obtained with positive film.

Lighter Skin Tone Makes skin tones lighter.

Darker Skin Tone Makes skin tones darker.

Vivid Blue Emphasizes blue tints. Makes the sky, ocean and other blue subjects more vivid.

Vivid Green Emphasizes green tints. Makes mountains, foliage and other green subjects more vivid.

Vivid Red Emphasizes red tints. Makes red subjects more vivid.

Custom Color You can adjust contrast, sharpness, and color saturation etc. to your preference.

The white balance cannot be set in the and modes (p. 73). In the and modes, colors other than peoples skin color may

change. You may not obtain the expected results with some skin colors.

CO PY

75

Shooting Using the Two Second Self-Timer

Custom Color The contrast, sharpness, color saturation, red, green, blue, and skin tones in an image can be selected and set from 5 different levels.

Follow Step 2 on page 75 and select , then press the n button.

Press the op buttons to select an option, then use the qr buttons or turn the dial to select a value.

The more to the right, the stronger/deeper the effect gets, the more to the left, the weaker/lighter the effect gets.

Press the n button to accept the setting.

You can set the self-timer to a delay of approximately two seconds.

Select . After pressing the o button, press the op buttons or turn the dial to select , then press the m button.

Once set, will appear. Follow Step 3 on page 63 to shoot.

Shooting Using the Two Second Self-Timer

CO PY

76

You can set the time delay (0 30 seconds) and the number of shots taken (1 10 shots).

Select $. After pressing the o button, press the op buttons or turn the dial to select $, then immediately the press the n button.

Select the settings. Press the op buttons to select [Delay] or

[Shots]. Press the qr buttons, or turn the dial

to select a value, then press the m button.

Follow Step 3 on page 63 to shoot.

Exposure and white balance settings are set with the first shot. When you set the time delay for more than 2 seconds, the self-timer lamp and

sound speed up 2 seconds before the shutter releases (when the flash will fire, the lamp lights).

$ Customizing the Self-Timer

What if the number of shots is set to two or more shots?

If the flash fires, the shooting interval may be longer. If you set a high number of shots, the shooting interval may be longer. If the memory card becomes full, shooting stops automatically.

CO PY

77

You can use a TV to display the camera screen content.

Connect the camera to a TV as described in Viewing Images on a TV (p. 105).

Shooting procedures are the same as when using the cameras monitor.

While you press and hold the shutter button halfway, the focus and exposure are fixed. You can now recompose and shoot. This is called Focus Lock.

Focus. Center the subject you want in focus, and

press the shutter button halfway. Confirm that the AF Frame on the subject

is green.

Recompose. Hold the shutter button pressed halfway

and recompose the scene.

Shoot. Press the shutter button fully.

TV display is not available when using the HDMI Cable HTC-100 (sold separately) to connect the camera to a high-definition TV.

Shooting Using a TV Monitor

Changing the Composition with the Focus Lock

CO PY

78

Getting More Out of Your Camera

This chapter serves as the advanced version of Chapter 4 and explains how to take pictures using various functions.

This chapter assumes that the mode switch is set to 4 and the camera is in G mode.

Shooting Long Exposures (p. 87), Changing the Color and Shooting (p. 88) and L Shooting Stitch Assist Images (p. 90) assume you have set the mode switch to 4 and selected the corresponding mode.

Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 144 147).

5

CO PY

79

You can change the AF (Auto Focus) frame mode to match the conditions you want to shoot.

Select [AF Frame]. Press the n button, select the 4

tab, select [AF Frame], then press the qr buttons to select an option.

Face AiAF Detects peoples faces and sets the focus, exposure (evaluative metering only)

and white balance ( only). When the camera is pointed at subjects, a white frame appears on the face the

camera judges to be the main subject, and gray frames (max. 2) will appear on other faces. When the shutter button is pressed halfway, up to 9 green frames will appear on faces on which the camera focuses.

Center The AF frame is fixed at the center. This is effective for focusing on a specific point.

Press the n button, select the 4 tab, then select the [AF Frame Size] menu item and [Small] option.

The setting is configured to [Normal] when the Digital Zoom or Digital Tele-converter is used.

Changing the AF Frame Mode

If a face is not detected and only gray frames (no white frame) appear, up to 9 green frames will appear on the areas the camera focuses on when the shutter button is pressed halfway.

Examples of faces that cannot be detected:

The camera may mistakenly identify non-human subjects as a face. If the camera cannot focus when you press the shutter button halfway,

the AF frame will not appear.

You can reduce the AF frame size

If the camera cannot focus when you press the shutter button halfway, the AF frame will turn yellow.

Subjects that are far away or extremely close. Subjects that are dark or light. Faces turned to the side or at a diagonal, or faces with a portion hidden.CO

PY

80

If you press the shutter button halfway, the AF frame will magnify and you can check the focus.

Select [AF-Point Zoom]. Press the n button and select [AF-

Point Zoom] on the 4 tab. Use the qr buttons to select [On].

Check the focus. Press the shutter button halfway.

In [Face AiAF], the face selected as the main subject will appear magnified. In [Center], the contents of the center AF frame will appear magnified.

The display will not appear magnified in [Face AiAF] mode if a face cannot be detected (p. 80) or is too big in relation to the screen. In [Center] mode, it will not appear magnified if the camera cannot focus.

Magnifying the Focal Point

What if the display does not magnify?

The magnified display will not appear when using the Digital Zoom (p. 60) or Digital Tele-Converter (p. 61), or when connected to a TV (p. 78).

OP Y

81

The focus can be locked. After locking the focus, the focal distance will not change even when you release your finger from the shutter button.

Lock the focus. Keep the shutter button pressed halfway

and press the q button. The focus locks and % is displayed on

the screen. If you release your finger from the shutter

button, and press the q button once more, % will disappear and the focus will unlock.

Compose the scene and shoot.

Since focus will be maintained on a subject while you press the shutter button halfway, you can shoot moving subjects without missing photo opportunities.

Select [Servo AF]. Press the n button and select [Servo

AF] on the 4 tab, and use the qr buttons to select [On].

Focus. While the shutter button is pressed halfway, the focus will continue to adjust on the spot where the blue frame appears.

% Shooting with the AF Lock

Shooting with Servo AF

The camera may not be able to focus in some conditions. You cannot shoot with the AF lock in this mode. You cannot set the Servo AF mode if you have set the [AF-Point Zoom]

option in the 4 tab to [On]. Not available in FaceSelf-Timer (p. 64).

CO PY

82

You can change the metering mode (brightness measuring function) to match the shooting conditions.

Select the metering mode. Press the m button and select , then

press the m button.

Select an option. Press the op buttons or turn the dial

to select an option, then press the m button. The setting will display on the screen.

When you wish to take several shots with the same exposure, you can set the exposure and focus separately using the AE lock. AE stands for Auto Exposure.

Lock the exposure. Point the camera toward the subject and

press the o button while pressing the shutter button halfway. When & appears, the exposure will be set.

If you release your finger from the shutter button and press the o button again, & will disappear and the AE will unlock.

Compose the scene and shoot.

Changing the Metering Mode

Evaluative Suitable for standard shooting conditions, including back lit shots. Automatically adjusts the exposure to match the shooting conditions.

Center Weighted Avg.

Averages the light metered from the entire frame, but gives greater weight to the center.

Spot Only meters within the (Spot AE Point frame) that appears at the center of the screen.

& Shooting with the AE LockCO PY

83

84

Just as with the AE lock (p. 83), you can lock the exposure for shooting with the flash. FE stands for Flash Exposure.

Select h (p. 67).

Lock the exposure. Point the camera toward the subject and

press the o button while pressing the shutter button halfway. The flash will fire and when ( appears, the flash output will be retained.

If you release your finger from the shutter button and press the o button again, ( will disappear and the FE will unlock.

Compose the scene and shoot.

You can make the main subject, such as people, appear bright by having the camera provide the appropriate illumination with the flash. At the same time, you can use a slow shutter speed to brighten the background that the light from the flash cannot reach.

Select . After pressing the r button, press the qr

buttons or turn the dial to select , then press the m button. Once set, will appear on the screen.

Shoot. Even if the flash fires, ensure that the

subject does not move until the shutter sound ends.

( Shooting with the FE Lock

Shooting with Slow Synchro

Attach the camera to a tripod to prevent the camera from moving and blurring the image. It is recommended to set the [IS Mode] to [Off] when shooting with a tripod (p. 133).

CO PY

The camera can automatically detect and compensate for faces or subjects that appear dark in certain shooting conditions.

Select [i-Contrast]. Press the n button, select

[i-Contrast] from the 4 tab, and use the qr buttons to select [Auto]. @ will appear on the screen.

@ Making Dark Subjects Appear Brighter (i-Contrast)

Under some conditions, the image may appear coarse or the exposure setting may not be suitable.

You can correct recorded images (p. 118).

CO PY

85

You can automatically correct red eyes in images taken with the flash.

Select [Flash Settings]. Press the n button, select [Flash

Settings] from the 4 tab and press the m button.

Adjust the setting. Press the op buttons or turn the dial

to select [Red-Eye Corr.] and press the qr buttons to select [On]. will appear on the screen.

When the camera detects that there is a possibility that people have their eyes shut, appears.

Select [Blink Detection]. Press the n button, select the 4

tab, and then select [Blink Detection]. Use the qr buttons to select [On].

Shoot. When a person with shut eyes is detected,

a frame and appear for a few seconds.

Red-Eye Correction

Red-eye correction may be applied to other red parts than red eyes. For example, when red make-up has been used around eyes.

You can correct recorded images (p. 119). If you press the r button as shown on the screen in Step 2 and then

press the n button, the Flash Settings screen will display (p. 48).

Checking for Shut Eyes

In W, " and $ mode, the function is only available for the last image shot.

CO PY

86

You can set the shutter speed to a range between 1 and 15 seconds to shoot long exposures. However, you should attach the camera to a tripod to prevent the camera from moving and blurring the image.

Select . Set the mode switch to 4, then select

in Step 1 3 on page 47 and press the m button.

Select the shutter speed. Press the m button, and use the op

buttons or turn the dial to select [)], then press the m button again.

Press the op buttons or turn the dial to select shutter speed, then press the m button.

Confirm the exposure. When you press the shutter button

halfway, the exposure for the selected shutter speed will appear.

Shooting Long Exposures

The brightness of the image may differ from the brightness of the screen in Step 3 when the shutter button was pressed halfway.

When shutter speeds of 1.3 seconds or slower are used, images are processed to eliminate noise after being taken. A certain amount of processing time may be needed before you can take the next shot.

It is recommended to set the [IS Mode] to [Off] when shooting with a tripod (p. 133).

If the flash fires, the image may be overexposed. If this happens, set the flash to ! and shoot.

CO PY

87

You can change the look of an image when shooting. However, the shooting conditions may cause the image to become coarse, or the colors may not come out as expected.

T Color Accent You can select to retain a single color and change the rest to black and white in a composition.

Select T. Follow Step 2 on page 56 to select T.

Hold the n button pressed. The unchanged image and the Color

Accent image will both display. The color for default settings is green.

Specify the color. Position the center frame so it is filled with

the color you want and press the q button. The specified color will be recorded.

Specify the range of colors. Press the op buttons or turn the dial

to change the range of colors to be retained.

Select a negative value to limit the range of colors. Select a positive value to extend the range of colors to similar colors.

Pressing the n button accepts the setting and restores the shooting screen.

Changing the Color and Shooting

Recorded color

Using the flash may cause unexpected results in this mode. The recorded color will be saved even if you turn off the power.

CO PY

88

Changing the Color and Shooting

Y Color Swap You can swap one color in an image for another when recording it. You can only swap one color.

Select Y. Follow Step 2 on page 56 to select Y.

Hold the n button pressed. The unchanged image and the Color

Swap image will both display. The default setting is to change green to

gray.

Specify the color to be swapped. Position the center frame so it is filled with

the color you want and press the q button. The specified color will be recorded.

Specify the target color. Position the center frame so it is filled with

the color you want and press the r button. The specified color will be recorded.

Specify the range of colors to be swapped. Press the op buttons or turn the dial

to adjust the range of colors affected. Select a negative value to limit the range

of colors. Select a positive value to extend the range of colors to similar colors.

Pressing the n button accepts the setting and restores the shooting screen.

CO PY

89

L Shooting Stitch Assist Images

Large subjects can be split into several shots that can later be merged together using the included software on a computer to create a panoramic image.

Select x or v. Follow Step 2 on page 56 to select x or v.

Take the first shot. The exposure and white balance will be set with the first shot.

Take subsequent shots. Overlap part of the first shot when taking

the second shot. Minor discrepancies in the overlapping

portions will be corrected when the images are merged.

You can repeat the procedure for the second shot to take up to 26 shots.

When you have finished taking shots, proceed to Step 4.

Finish shooting. Press the m button.

Merge the images on a computer. For details on how to merge the images,

refer to the Software Starter Guide.

Using the flash may cause unexpected results in this mode. The recorded color and range of colors will be saved even if you turn off

the power. Under some conditions, the image may appear coarse.

L Shooting Stitch Assist Images

This function is not available when a TV is used as the monitor (p. 78).

CO PY

90

Using Various Functions for Shooting Movies

This chapter provides more advanced information than the E Shooting Movies and 1 Viewing Movies sections of Chapter 1.

This chapter assumes that the mode switch is set to E.

6

CO PY

91

You can select between three movie modes.

Set the mode switch to E.

Select a movie mode. After pressing the m button, press the op buttons or turn the dial to select E, then press the m button.

Press the op buttons or turn the dial to select a mode, then press the m button.

You can select between three image quality settings.

Select the image quality. After pressing the m button, press the op buttons or turn the dial to select

, then press the m button.

Select an option. Press the qr buttons or turn the dial

to select an option, and press the m button. The setting will display on the screen.

Changing the Movie Mode

X Standard For shooting standard quality movies.

> Color Accent These shooting modes let you change all colors except the selected color to black and white, or exchange the selected color for another color, when shooting. See Changing the Color and Shooting (p. 88) for details.z Color Swap

Under some conditions, colors may not turn out as expected in the > and z mode.

Changing the Image QualityCO PY

92

AE Lock/Exposure Shift

93

Image Quality Table

Estimated Shooting Time

You can set the exposure or change it in 1/3 steps within a range of 2.

Focus.

Lock the exposure. While pressing the shutter button halfway,

press the o button to lock the exposure. The exposure shift bar appears.

Press the o button again to release the lock.

Change the exposure. While watching the screen, turn the

dial to adjust the brightness.

Shoot.

Image Quality (Recording Pixels/Frame Rate) Content

1280 720 pixels, 30 frames/sec. For shooting high-definition movies.

640 480 pixels, 30 frames/sec. For shooting standard quality movies.

320 240 pixels, 30 frames/sec. Since the number of the recording pixels is smaller, the image quality will be lower than with

, but you can record three times the length.

Image Quality (Frame Rate)

Shooting Time 2 GB 8 GB

10 min. 53 sec. 43 min. 32 sec.

23 min. 49 sec. 1 hr. 35 min. 11 sec.

1 hr. 13 min. 10 sec. 4 hrs. 52 min. 24 sec.

Based on Canons testing standards. Recording will automatically stop when either the clip file size reaches 4 GB or the

recording time reaches approximately 29 minutes and 59 seconds in , 1 hour in and .

Recording may stop even if the maximum clip length has not been reached on some memory cards. SD Speed Class 4 or higher memory cards are recommended.

AE Lock/Exposure ShiftCO PY

The following functions can be used in the same way as for still images. For > and z modes, the functions with an * attached can be used in the same way as for still images. Zooming in More Closely on Subjects (Digital Zoom) (p. 60)

You can use the digital zoom, but the optical zoom cannot be used. If you want to shoot at the maximum zoom factor, you should adjust the optical zoom to the maximum before shooting. The sound of the zoom will be recorded.

Using the Self-Timer (p. 63)* e Shooting Close-ups (Macro) (p. 68)* u Shooting Far Away Subjects (Infinity) (p. 67)* Adjusting the White Balance (p. 73) Changing the Tone of an Image (My Colors) (p. 75) Shooting Using the Two Second Self-Timer (p. 76)* Shooting Using a TV Monitor (p. 78)* % Shooting with the AF Lock (p. 82) Turning off the AF Assist Beam (p. 131)* Displaying the Overlay (p. 132)*

[3:2 Guide] is not available. Changing the IS-Mode Settings (p. 133)*

You can switch between [Continuous] and [Off].

The following functions can be used in the same way as for still images. / Erasing Images (p. 29) g Quickly Searching Images (p. 98) Viewing Images in Filtered Playback (p. 100) . Viewing Slideshows (p. 101) + Changing Image Transitions (p. 104) Viewing Images on a TV (p. 105) / Erasing All Images (p. 107) : Protecting Images (p. 110) ; Organizing Images by Category (My Category) (p. 112) \ Rotating Images (p. 114)

Other Shooting Functions

Playback FunctionsCO PY

94

* Editing

Summary for 1 Viewing Movies (p. 34)

You can trim the beginnings and ends of recorded movies in one-second increments.

Select *. Follow Step 1 to 3 on p. 34, select * and

press the m button. The movie editing panel and the movie editing bar will display.

Set the editing range. Press the op buttons and select or

. Press the qr buttons or turn the dial

to move . will display at each one- second interval. If you select , you can trim the beginning of the movie from . If you select , you can trim the end of the movie from .

Exit

Playback Slow Motion Playback (you can use the qr buttons to adjust the speed. Sound will not play back.) Display the first frame

Previous frame (Rewind if you hold down the m button.)

Next frame (Fast forward if you hold down the m button.)

Display the last frame

Edit (p. 95) Displays when connected to a PictBridge compliant printer (p. 30). Refer to the Personal Printing Guide for details.

* Editing

Movie Editing Bar

Movie Editing Panel

CO PY

95

* Editing

Even if you move to a point other than a point, only the portion from the nearest to the left will be trimmed when is

selected. Only the portion from the nearest to the right will be trimmed when is selected. The section selected with will be the section of the movie that remains after editing.

Check the edited movie. Press the op buttons to select , then

press the m button. The edited movie will play.

To edit the movie again, repeat Step 2. To cancel editing, press the op buttons,

and select . After pressing the m button, press the qr buttons or turn the dial to select [OK], and press the m button.

Save the edited movie. Press the op buttons to select , then

press the m button. Press the qr buttons or turn the dial

to select [New File], then press the m button. The movie will be saved as a new file.

When [Overwrite] in Step 4 is selected, the unedited movie is overwritten with the edited movie, erasing the original movie.

When there is not enough space left on the memory card, only [Overwrite] can be selected.

If the battery is depleted partway through editing, the edited movie clips may not be saved. When editing movies, you should use a fully charged battery or the separately sold AC adapter kit (p. 40).

CO PY

96

Using Playback and Other Functions

The first part of this chapter explains various ways to play back and edit images. The latter part explains how to specify images for printing.

Press the 1 button to select the Playback mode before operating the camera.

It may not be possible to play back or edit images that have been edited on a computer, had their file name changed, or have been taken on a different camera.

The edit function (pp. 114 119) cannot be used if the memory card does not have free space available.

7

CO PY

97

Searching Images Using Index Display Displaying multiple images at a time lets you quickly find the image you want.

Move the zoom lever toward g. Images will display in an index.

Move the zoom lever toward g to increase the number of images. The number of images increases each time you move the lever.

Move the zoom lever toward k to reduce the number of images. The number of images will reduce each time you move the lever.

Change the displayed images. Turn the dial to switch to the next set

of images set in Step 1.

Select an image. Press the opqr buttons to select an

image. An orange frame appears on the selected image.

Press the m button to display the selected image by itself.

g Quickly Searching Images

CO PY

98

g Quickly Searching Images

Searching Images Using the Control Dial Turn the control dial to quickly search images. You can also jump by the shooting date.

Select an image. If you set the single image playback and

turn the dial quickly, the images will display as shown on the left.

If you press the op buttons, you can search images by the shooting date.

Pressing the m button restores the single image playback.

CO PY

99

When there are many images on the memory card, you can filter and display them by a specified condition. You can also delete (p. 107) or protect (p. 110) all images at once in the filtered condition.

Setting the Conditions Select . Press the m button to select , then

press the m button.

Select a condition. Press the op buttons or turn the dial

to select a condition, then press the m button.

View the filtered images. Press the op buttons or turn the dial

to select a condition for playback, then press the m button. Filtered playback starts and a yellow frame displays.

If you press the qr buttons or turn the dial, only the images selected in Step 1 will display.

If you select [All Images] in Step 2, filtered playback will be canceled.

Search by , ;, and

Conditions containing no images cannot be selected.

Viewing Images in Filtered Playback

Date Displays the images shot on the specified date ; My Category Displays the images of the specified category

Folder Displays the images in a specified folder File Format Displays only still images or movies

What if you cant select a target?

CO PY

100

. Viewing Slideshows

You can use the following functions in filtered playback for processing the filtered images at once. Erasing Images (p. 29), . Viewing Slideshows (p. 101), : Protecting

Images (p. 110),Selecting Images for Printing (DPOF) (p. 121)

You can automatically play back images recorded to a memory card. Each image displays for approximately 3 seconds.

Select .. Press the m button to select ., then

press the m button.

The slideshow will start a few seconds after [Loading image] displays.

In filtered playback (p. 100), only images in a filtered condition play back.

You can pause/restart a slideshow by pressing the m button again.

Press the n button to stop the slideshow.

Filtered Playback

. Viewing Slideshows

If you press the qr buttons or turn the dial during playback, the image will switch. If you press and hold down the qr buttons you can fast-forward through images.

The power saving function does not work during slideshows (p. 53).

CO PY

101

. Viewing Slideshows

Changing Settings You can change the time that slideshow images are displayed, transition effects and set the slideshow to repeat. You can select from seven transition effects when switching between images.

Select [Slideshow]. Press the n button and select the 1

tab, then select [Slideshow] and press the m button.

Make the setting. Press the op buttons, or turn the

dial to select an item, then press the qr buttons to adjust the setting.

If you select [Start] and press the m button, the slideshow starts with your settings.

Pressing the n button restores the slideshow screen.

CO PY

102

You can magnify the area of a recorded image that was inside the AF frame or the area of a face that was detected to check the focus.

Press the p button, and switch to the focus check display (p. 45).

A white frame will appear where the AF frame or face was when the focus was set. A gray frame will appear on a face detected during playback. The area within the orange frame appears magnified.

Change the magnification level or location. Move the zoom lever toward k once. Use the zoom lever to change the display

size, and the opqr buttons to change the display position while checking the focus.

Switch frames. Pressing the m button will switch to a

different frame. Pressing the n button resets the

display to Step 1.

Checking the Focus

CO PY

103

Move the zoom lever toward k. The display will zoom in on the image and,

if you continue to hold the zoom lever, it will continue to zoom in up to a factor of 10x.

If you press the opqr buttons, you can move the location of the displayed area.

Move the zoom lever toward g to zoom out or return to Single Image Playback.

If you turn the dial, you can switch images in the zoomed state.

You can select from three transition effects when switching between images in single image playback.

Select [Transition]. Press the n button and select the 1

tab, then select [Transition] and use the qr buttons to select a transition effect.

Press the n button to accept the setting.

k Magnifying Images

Approximate Location of Displayed Area

+ Changing Image Transitions

CO PY

104

Using the supplied AV cable, you can connect the camera to a TV to view images you have shot.

Items to Prepare Camera and TV AV cable supplied with the camera (p. 2)

Turn off the camera and TV. Connect the camera to the TV. Open the cameras terminal cover and

fully insert the plug of the supplied AV cable into the cameras A/V OUT terminal.

Insert the cable plug fully into the video input terminals as shown in the illustration.

Turn on the TV and switch it to the input to which the cable is connected.

Turn on the camera. Press the 1 button to turn on the camera.

The image will appear on the TV (nothing will appear on the monitor of the camera).

After you finish viewing, turn off the camera and TV, and unplug the AV cable.

Images will not display correctly if the cameras video output setting (NTSC/PAL) does not match the TV system. Press the n button, select the 3 tab and [Video System] to switch to the correct video system.

Viewing Images on a TV

Yellow

White or black

Black

Yellow

What if the images dont properly display on the TV?

CO PY

105

Use the separately sold HDMI cable HTC-100 to connect the camera with a high-definition TV for enhanced viewing experience.

Turn off the camera and TV.

Connect the camera to the TV. Open the cameras terminal cover and

fully insert the plug of the supplied AV cable into the cameras HDMI out mini terminal.

Insert the cable plug fully into the TVs HDMI terminal as shown in the illustration.

Follow Steps 3 4 on p. 105 to display the images.

Viewing Images on a High-Definition TV

CO PY

106

You can select images and erase them in groups. Since erased images cannot be recovered, exercise adequate caution before erasing. Protected images (p. 110) cannot be erased.

Select [Erase]. Press the n button, select the 1 tab

and [Erase], and press the m button.

Select a selection method. Press the op buttons or turn the

dial, select a selection method, and press the m button.

Pressing the n button will restore the menu screen.

Selecting Images Individually Select [Select]. Follow Step 2 above to select [Select] and

press the m button.

Select images. Press the qr buttons or turn the dial,

select the image and press the m button. Once set, will appear on the screen.

Pressing the m button once more will cancel the selection, and will disappear.

To select multiple images, repeat the above operation.

Press the n button.

Erase. Press the qr buttons or turn the dial,

select [OK] and press the m button.

/ Erasing All Images

CO PY

107

/ Erasing All Images

Select Range Select [Select Range]. Follow Step 2 on p. 107 to select [Select

Range] and press the m button.

Select the starting image. Press the m button. Press the qr buttons or turn the dial,

select the image and press the m button.

Select the ending image. Press the r button, select [Last image]

and press the m button. You cannot select images before the first

image. Press the qr buttons or turn the dial to

select an image, and press the m button.

Erase. Press the p button to select [Erase], then

press the m button.

CO PY

108

/ Erasing All Images

You can also select the first or last image by turning the dial when the upper screen in Steps 2 and 3 is displayed.

Select All Images Select [All Images]. Follow Step 2 on p. 107 to select [All

Images] and press the m button.

Erase. Press the qr buttons or turn the dial,

select [OK] and press the m button.

Select images with the dial

CO PY

109

You can protect important images so that they cannot be erased by the camera (pp. 29, 107).

Select :. Press the m button to select :, then

press the m button.

Make the setting. Press the qr buttons or turn the dial,

select [Protect], and press the m button. Once set, will appear on the screen.

: Protecting Images

If you format the memory card (p. 52), protected images will also be erased.

Protected images cannot be erased with the cameras erase function. To erase an image, cancel protection first.

You can also protect images using the following method. Press the n button, select the 1 tab, select [Protect]. Press m to select [Select] and press m, then press the qr buttons to select an image and press m.CO

PY

110

: Protecting Images

Select Range Select [Protect]. Press the n button, select the 1 tab

and [Protect], and then press the m button.

Select [Select Range]. Press the op buttons or turn the dial,

select [Select Range], and press the m button.

Follow Steps 2 and 3 on p. 108 to select the range.

Protect images. Press the p button, select [Protect] and

press the m button.

Select All Images Select [All Images]. Follow Step 2 above to select [All Images]

and press the m button.

Protect images. Press the op buttons or turn the

dial, select [Protect] and press the m button.

You can unlock groups of protected images if you select [Unlock] in Step 2, while in [Select Range] or [All Images].

CO PY

111

You can categorize images. You can also use the categorized images in the following functions. Viewing Images in Filtered Playback (p. 100), Slideshow (p. 101), Erase

All (p. 107), Protect (p. 110), Print Settings (DPOF) (p. 121)

Select ;. Press the m button to select ;, then

press the m button.

Make the setting. Press the op buttons, select a category

and press the m button. Once set, will appear on the screen.

To select multiple images, press the qr buttons or turn the dial to select an image, then repeat the above operation.

; Organizing Images by Category (My Category)

Images are automatically categorized by shooting condition as they are shot.

: Images shot in I, F, C modes or images with faces detected when the [AF Frame] is set to [Face AiAF] will be categorized to .

: Images shot in A and detected as or or images shot in U or O will be categorized to .

: Images shot in H, P, w, t, y, S will be categorized to .

CO PY

112

; Organizing Images by Category (My Category)

Selecting Images Individually Select [My Category]. Press the n button, select the 1 tab

and [My Category], and press the m button.

Select [Select]. Press the op buttons or turn the

dial, select [Select], and press the m button.

Make the setting. Follow Step 2 to set the category. Pressing the n button will restore the

menu screen.

Select Range Select [Select Range]. Follow Step 2 above to select [Select

Range] and press the m button. Follow Steps 2 and 3 on page 108 to

select images. Press the p button, select the item and

press the qr buttons, or turn the dial, and select a type.

Select the setting. Press the p button to select [Select] and

press the m button.

If you select [Deselect] in Step 2, you can deselect all of the images in the [Select Range] category.

CO PY

113

You can change the orientation of an image and save it. Movies with a resolution of (1280 780) cannot be rotated.

Select \. Press the m button to select \, then

press the m button.

Make the setting. Press the qr buttons to select the

rotation direction and press the m button. The image will rotate 90 in the selected direction.

Pressing the n button will restore the menu screen.

Select All Images Select [Rotate]. Press the n button and select the 1

tab, then select [Rotate] and press the m button.

Rotate the image. Press the qr buttons or turn the dial

to select an image to rotate. The image will rotate 90 with each press

of the m button. If you want to rotate multiple images,

press the qr buttons or turn the dial, select an image and repeat the operations above.

Pressing the n button will restore the menu screen.

\ Rotating Images

CO PY

114

115

You can resize images to a lower pixel setting and save the resized image as a separate file.

Select [Resize]. Press the n button and select the 1

tab, then select [Resize] and press the m button.

Select an image. Press the qr buttons or turn the dial,

select the image and press the m button.

Select an image size. Press the qr buttons or turn the dial

to select an option, then press the m button. The [Save new image?] screen will appear.

Save the new image. Press the qr buttons or turn the dial

to select [OK] and press the m button. The image will be saved as a new file.

Display the new image. When you press the n button, the

[Display new image?] screen will appear. If you press the qr buttons, or turn the dial to select [Yes] and press the m button, the saved image will display.

= Resizing Images

You cannot resize an image to a larger size. You cannot resize images taken with the and settings.

CO PY

You can cut out a portion of a recorded image and save it as a new image file.

Select [Trimming]. Press the n button, select the 1 tab

and [Trimming], then press the m button.

Select an image. Press the qr buttons or turn the dial,

select the image and press the m button.

Adjust the trimming area. A frame will appear around the portion of the image to be trimmed. The original image will display in the upper left and the trimmed image will display in the lower right.

If you move the zoom lever to the left or right, you can change the frame size.

If you press the opqr buttons, you can move the frame.

If you press the m button, you can change the vertical/horizontal orientation of the frame.

In an image with a detected face, a gray frame will appear around faces located in the upper left of the frame, and the frame can be used for trimming. You can switch between frames by turning the dial.

After pressing the n button, press the qr buttons or turn the dial to select [OK], and press the m button.

Save as a new image and display. Perform Steps 4 and 5 on p. 115.

[ Trimming

Trimming Area

Trimming Area Display

Recorded pixels after trimming

, and images cannot be trimmed. Trimming is only possible for images shot at aspect ratio 4:3 (vertical 3:4). The number of recorded pixels in a trimmed image will be smaller than

before trimming.

CO PY

116

You can change the color of an image and save it as a separate image. Refer to p. 75 for details on each menu item.

Select [My Colors]. Press the n button, select the 1 tab

and [My Colors], and press the m button.

Select an image. Press the qr buttons or turn the dial,

select the image and press the m button.

Select a menu option. Press the qr buttons or turn the dial

to select an option, then press the m button.

After selecting the menu option, you can zoom the image by following the operations in k Magnifying Images (p. 104).

If you press the m button during magnified display, you can switch to the original image. Pressing the n button restores the menu screen.

Save as a new image and display. Perform Steps 4 and 5 on p. 115.

? Adding Effects with the My Colors Function

If you repeatedly change the color of an image, the quality will gradually deteriorate and you may not achieve the expected color.

The coloration of images changed with this function may vary from those recorded with the My Colors function (p. 75).

CO PY

117

Detects and compensates for dark sections of subjects or peoples faces and saves the image as a separate file. You can select 4 levels of correction: [Auto], [Low], [Medium] or [High].

Select [i-Contrast]. Press the n button, select the 1 tab

and [i-Contrast], then press the m button.

Select an image. Press the qr buttons or turn the dial,

select the image and press the m button.

Select an option. Press the qr buttons or turn the dial

to select an option, then press the m button.

Save as a new image and display. Perform Steps 4 and 5 on p. 115.

Select [Low], [Medium] or [High] and adjust the image.

@ Making Dark Subjects Appear Brighter (i-Contrast)

What if the image wasnt corrected by the [Auto] option as well as you would like?

Under some conditions, the image may appear coarse or the exposure setting may not be suitable.

Repeatedly adjusting the same image may cause the quality to deteriorate.

CO PY

118

You can automatically correct red eyes in images and save them as new files.

Select [Red-Eye Correction]. Press the n button, select the 1 tab

and [Red-Eye Correction], then press the m button. The [Red-Eye Correction] screen will appear.

Select an image. Press the qr buttons or turn the dial,

select the image. You can zoom the image using the

procedures in k Magnifying Images (p. 104).

Correct the image. Press the m button.

Frames appear at the corrected areas. You can zoom the image using the

procedures in k Magnifying Images (p. 104).

Save as a new image and display. Press the opqr buttons, or turn the

dial to select [New File], and press the m button. The image will be saved as a new file.

Display the new image using the operation in Step 5 on p. 115.

] Correcting the Red-Eye Effect

Some images may not be properly corrected. When [Overwrite] in Step 4 is selected, the uncorrected image is

overwritten with the corrected data, erasing the original image. Protected images cannot be overwritten.

CO PY

119

You can add images to the print list (DPOF) directly after shooting or while in playback by using the FUNC. menu. You can print from a print list simply by connecting your camera and printer. These selection methods comply with the DPOF (Digital Print Order Format) standards.

Easily Add Images to the Print List Select an image. Press the qr buttons or turn the dial,

select the image.

Select c (videos will be excluded). Press the m button to select c, then

press the m button again.

Print list. Press the op buttons and select the

number of prints, press the qr buttons or turn the dial, select [Add] and press the m button.

To remove an image from the print list, select the added image and press the m button, select c and press m. Press the qr buttons or turn the dial to select [Remove], then press m.

Print Added Images The following examples use the Canon SELPHY series printers. Please also refer to the Personal Printing Guide.

Connect the camera to the printer (p. 30).

Print. Press the op buttons, select [Print now]

and press the m button. Printing will start.

If you stop the printer during printing and start again, it will start from the next print.

Printing from the Print List (DPOF)

Number of copies to print

CO PY

120

You can select certain images on a memory card for printing (up to 998 images) and specify the number of print copies so they can be printed together or processed at a photo developer service. You can then print all the selected images at once or take the memory card to a photo developer to order prints. These selection methods comply with the DPOF (Digital Print Order Format) standards.

Print Settings You can set the print type, date and file number. These settings apply to all images selected for printing.

Select [Print Settings]. Press the n button and select the 2

tab, then select [Print Settings] and press the m button.

Adjust the settings. Press the op buttons or turn the dial

to select a menu item, then press the qr buttons to select an option. Pressing the n button accepts the settings and restores the menu screen.

Selecting Images for Printing (DPOF)

Print Type

Standard Prints one image per page.

Index Prints several reduced size images per page.

Both Prints both standard and index formats.

Date On Prints the date from the shooting information. Off

File No. On Prints the file number. Off

Clear DPOF data

On Removes all print settings after printing. Off

CO PY

121

Selecting Images for Printing (DPOF)

Selecting the Number of Copies Select [Select Images & Qty.]. Press the n button and select the 2

tab, then select [Select Images & Qty.] and press the m button.

Select an image. Press the qr buttons or turn the dial

to select an image, then press the m button. You will be able to set the number of print copies.

If you select [Index], appears on the screen.

Press the m button again to deselect the images. will disappear.

Some printers or photo developer services may not be able to reflect all of the print settings in the output.

may display when using a memory card with print settings set by a different camera. These settings will be overwritten by those set by your camera.

Images with the date embedded always print with the date, regardless of the [Date] setting. As a result, some printers may print the date twice on these images if [Date] is also set to [On].

With [Index] selected, the [Date] and [File No.] options cannot be set to [On] at the same time.

The date will be printed in the style set in the [Date/Time] function in the 3 tab (p. 19).

CO PY

122

Selecting Images for Printing (DPOF)

Set the number of prints. Press the op buttons or turn the dial

to set the number of prints (maximum 99). Repeat Steps 2 and 3 to select other

images and the number of prints for each. You cannot set the number of print copies

for Index prints. You can only select which images to print in Step 2. Pressing the n button accepts the settings and restores the menu screen.

Select Range Select [Select Range]. Select [Select Range] in Step 1 on p. 122

and press the m button. Select images according to Steps 2 and 3

on p. 108.

Make print settings. Press the op buttons, select [Order] and

press the m button.

Set All Images to Print Once Select [Select All Images]. Select [Select All Images] from the screen

in Step 1 on p. 122 and press the m button.

Make print settings. Press the qr buttons or turn the dial,

select [OK] and press the m button.

CO PY

123

Selecting Images for Printing (DPOF)

Clearing All Selections Select [Clear All Selections]. Select [Clear All Selections] in Step 1 on

p. 122, and press the m button. Press the qr buttons or turn the dial

to select [OK], then press the m button. All selections will be cleared.

CO PY

124

Customizing the Camera You can customize various functions to suit your shooting preferences. The first part of this chapter explains convenient and commonly used functions. The latter part explains how to change shooting and playback settings to suit your purposes.

8

CO PY

125

You can customize convenient and commonly used functions from the 3 tab (p. 48).

Turning off the Power Saving Function You can set the power saving function (p. 53) to [Off]. Setting it to [On] is recommended to save battery power.

Select [Power Saving], then press the m button.

Press the op buttons or turn the dial to select [Auto Power Down], then use the qr buttons to select [Off].

If you set the Power Saving function to [Off], be careful not to forget to turn off the camera after use.

Setting the Screen Shut-Off Time You can adjust the time the screen takes to shut off automatically (p. 53). This also works when [Auto Power Down] is set to [Off].

Select [Power Saving], then press the m button.

Press the op buttons or turn the dial to select [Display Off], then use the qr buttons to select a time.

In order to save battery power, it is recommended to select less than [1min.].

Changing Functions

CO Y

126

Changing Functions

Using the World Clock When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/ Time settings.

Set the home time zone. Select [Time Zone] and press the m

button. When setting this for the first time, confirm

the information that displays on the screen at the left, and press the m button.

Press the qr buttons or turn the dial to select the home time zone, then press the m button. To set daylight saving time (adds 1 hour), press the op buttons to select .

Set the world time zone. Press the op buttons or turn the dial

to select , then press the m button. Press the qr buttons or turn the dial

to select the destination time zone, then press the m button.

You can also set the daylight saving time as in Step 1.

Select the world time zone. Press the op buttons or turn the dial

and select [Home/World]. Press the qr buttons to select , then

press the n button. will appear in the [Time Zone] or

shooting screen (p. 44).

If you change the date or time in the setting, (p. 19), your time and date will automatically change.

CO PY

127

Changing Functions

Turning off Hints & Tips When you select an item in the FUNC. menu or when using the opqr buttons, hints and tips display. You can turn off this function.

Select [Hints & Tips] and press the qr buttons to select [Off].

Changing the File Number Assignment Images you shoot are automatically assigned file numbers in the order they were taken, from 0001 9999, and saved to folders of up to 2,000 images. You can change the file number assignment.

Select [File Numbering], then press the qr buttons to select an option.

Continuous

Even if you shoot using a new memory card, the file numbers are assigned consecutively until an image with the number 9999 is taken/saved.

Auto Reset If you replace the memory card with a new one, file numbering begins with 0001 again.

If you use a memory card already containing images, the newly assigned file numbers may continue the existing numbering for both the [Continuous] and [Auto Reset] settings. If you want to start over with file number 0001, format the memory card before use (p. 22).

Refer to the Software Starter Guide for information regarding folder structure or image types.

CO PY

128

Changing Functions

Creating a Folder You can create new folders in which to save images.

Select [Create Folder], then press the m button.

Select [Create New Folder], then press the qr buttons to select .

Shots will be recorded into the new folder.

Creating Folders by Day and Time You can set a day and time for folder creation.

Select [Create Folder], then press the m button.

Select [Auto Create], then press the qr buttons to select an interval.

Select [Time], then press the qr buttons to set a time.

The new folder will be created on the set day and time. Images shot after the creation date are saved to the new folder.

Turning off Auto Rotate When you play back images on the camera, images shot in vertical orientation automatically rotate and display vertically. You can turn off this function.

Select [Auto Rotate], then press the qr buttons to select [Off].

CO PY

129

Changing Shooting Functions

Changing the Lens Retract Time For safety reasons, the lens retracts about 1 minute after pressing the 1 button when in a shooting mode (p. 27). You can set the retraction time to [0 sec.].

Select [Lens Retract], then press the qr buttons to select [0 sec.].

If you set the mode switch to 4, and the mode to G, you can change the settings in the 4 tab (p. 48).

Turning off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function.

Select [Flash Settings], then press the m button.

Press the op buttons or turn the dial to select [Red-Eye Lamp], then press the qr buttons to select [Off].

Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 144 147).

Changing Shooting Functions

CO PY

130

Changing Shooting Functions

Turning off the AF Assist Beam If the camera cannot focus in low light conditions when you press the shutter button halfway, the lamp will automatically light to assist focusing. You can turn off the lamp.

Select [AF-assist Beam], then press the qr buttons to select [Off].

Changing the Image Display Time You can change the length of time the images display directly after shooting.

Select [Review], then press the qr buttons to select an option.

If you select [Off], the image will not display.

If you select [Hold], the image displays until you press the shutter button halfway.

Changing the Image Display Right After Shooting You can change the image display that appears after shooting.

Select [Review Info], then press the qr buttons to select an option. Detailed Displays detailed information (p. 45).

Focus Check

The area inside the AF frame is magnified, allowing you to check the focus. The procedure is the same as in Checking the Focus (p. 103).

CO PY

131

Changing Shooting Functions

Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for L size or postcard size prints.

Select [Disp. Overlay], then press the qr buttons to select an option. Grid Lines A grid overlays the display.

3:2 Guide

The areas outside the 3:2 range are grayed out. This area will not print when printing on paper with a 3:2 aspect ratio.

Both Both grid lines, and the 3:2 guide will display.

In mode, you cannot set [3:2 Guide] or [Both]. Grid Lines will not be recorded on the image. The gray areas displayed with [3:2 Guide] are the areas that will not be

printed. The actual image recorded will include the portion in the gray areas.

CO PY

132

Changing Shooting Functions

Changing the IS-Mode Settings Select [IS Mode], then press the qr buttons

to select an option.

Continuous

Image stabilization is always on. You can confirm the result directly on the display, which makes it easier to check the composition or focus.

Shoot Only Image stabilization is only active at the moment of shooting.

Panning

Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally.

If camera shake is too strong, attach the camera to a tripod. It is recommended to set the IS Mode to [Off] when the camera is fixed to a tripod.

When using [Panning], hold the camera horizontally. Image stabilization does not work when the camera is held vertically.

CO PY

133

You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).

Turning off Active Display When you shake or tilt the camera gently you can display the next image or you can change the speed at which images switch. You can turn off this function.

Select [Active Display], then press the m button.

Press the qr buttons to select [Off].

Selecting the Image that First Displays in Playback

Select [Resume], then press the qr buttons to select an option.

Changing Playback Functions

Last seen Resumes with the image last viewed.

Last shot Resumes with the most recently shot image.CO PY

134

In the 3 tab, you can change the sounds played for each camera operation or set the start-up image that appears when the camera power is turned on.

Change Sounds Select [Sound Options], then press the m

button. Press the op buttons or turn the dial

to select an option. Press the qr buttons to change the sound.

Changing the Start-up Screen Select [Start-up Image], then press the m

button. Press the qr buttons to change the image.

Changing the Start-up Image or Sound

1 Preset sound.

2 You can register your sounds using the supplied software (ZoomBrowser EX/ ImageBrowser) (p. 136).

X No start-up image.

1 Preset image.

2 You can register your images.CO Y

135

Changing the Start-up Image or Sound

Setting a Recorded Image as the Start-up Screen Image When you press the 1 button and set the camera to playback mode, you can register sounds and images.

Select [Start-up Image], then press the m button.

Press the qr buttons to select [2], then press the m button.

Press the qr buttons or turn the dial to select an image, then press the m button.

Press the qr buttons or turn the dial to select [OK], then press the m button to complete registration.

You can register sounds and start-up screen images that come with the included software to the camera. Refer to the Software Starter Guide for details.

Any previously registered start-up image will be overwritten when registering a new start-up image (p. 136).

Using the included software to register sounds and the start-up screen imageCO

PY

136

Useful Information This chapter introduces how to use the AC adapter kit (sold separately), troubleshooting tips and contains lists of functions. The index also appears at the end.

9

CO PY

137

If you use AC Adapter Kit ACK-DC10 (sold separately), you can use the camera without worrying about how much charge is left in the battery.

Insert the coupler. Open the cover (p. 16) and insert the

coupler as shown until it locks into place with a click.

Close the cover (p. 16).

Plug the cord into the coupler. Open the cover and fully insert the plug

into the coupler.

Connect the power cord. Connect the power cord to the compact

power adapter, then plug the other end into a power outlet.

You can turn the camera on to use it. After you finish, turn off the camera and

unplug the power cord from the power outlet.

Using Household Power

Do not unplug the plug and cord with the camera turned on. This could erase images you have taken or damage the camera.

CO PY

138

If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.

Power You pressed the power button, but nothing happened. Confirm that the battery is properly inserted (p. 16). Confirm that the memory card/battery cover is securely closed (p. 16). If the battery terminals are dirty, battery performance will decrease. Clean the

terminals with a cotton swab and re-insert the battery several times. Battery is consumed quickly. Battery performance decreases at low temperatures. Warm the battery by such

methods as placing them in your pocket with the terminal cover on. Lens will not retract. Do not open the memory card/battery cover while the power is on. After closing

the memory card/battery cover, turn the power on then back off (p. 17).

TV output Image is distorted or not showing on TV (p. 105). Shooting Cannot shoot. Set the mode switch to 4 (p. 42). When in playback (p. 27), press the shutter button halfway (p. 23). Screen does not display properly in dark places (p. 46). Screen does not display properly while shooting. Please note, the following will not be recorded in still images, but will be recorded in movies. When the camera is subjected to powerful light sources, the display may

darken. Under fluorescent lighting, the screen may flicker. When shooting bright light sources, a bar of light (purplish red) may appear on

the screen. The h icon blinks when you try to shoot (p. 26).

appears when the shutter button was pressed halfway (p. 59). Set [IS Mode] to [Continuous] (p. 133). Set the flash to h (p. 67). Increase the ISO speed (p. 72). Attach the camera to a tripod.

Troubleshooting

CO PY

139

Troubleshooting

Image is blurred. Press the shutter button halfway to focus, then shoot (p. 23). Shoot the subject within the focusing distance (p. 151). Set the [AF-assist beam] to [On] (p. 131). Confirm that functions which you do not intend to use (macro, etc.) are not set. Shoot using the focus lock or AF lock (pp. 78, 82). Even when you press the shutter button halfway, the frame does not appear, and the camera does not focus. If you center on the light and dark contrasting area of the subject and press the

shutter button halfway, or repeatedly press the shutter button halfway, the frame will appear and the camera will focus.

Subject is too dark. Set the flash to h (p. 67). Adjust the brightness with exposure compensation (p. 74). Adjust the brightness with the i-Contrast function (pp. 85, 118). Use the AE lock, or spot metering to shoot (p. 83). Subject is too bright (overexposed). Set the flash to ! (p. 59). Adjust the brightness with exposure compensation (p. 74). Use the AE lock, or spot metering to shoot (p. 83). The subject is too bright due to ambient lighting. Image is dark even though the flash fired (p. 25). Increase the ISO speed (p. 72). Shoot within an appropriate distance for flash photography (p. 67). Image taken using the flash is too bright (overexposed). Shoot within an appropriate distance for flash photography (p. 67). Set the flash to ! (p. 59). White dots appear on the image when shooting with the flash. Light from the flash has reflected off dust particles or other objects in the air. Image appears rough or grainy. Shoot with the ISO speed on a lower setting (p. 72). Depending on the shooting mode, when shooting in a high ISO speed the image

may appear rough or grainy (p. 58). Eyes appear red (p. 86). Set the [Red-Eye Lamp] to [On] (p. 130). When shooting with the flash, the lamp

(on the front of the camera) lights (p. 42), and for approximately 1 second while the camera is reducing red-eye, it is not possible to shoot. It is more effective if the subject is looking directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject.

CO PY

140

Troubleshooting

Recording images to the memory card takes a long time, or continuous shooting slows down. Perform a low-level format of the memory card in the camera (p. 52). When you cant make settings for shooting functions or FUNC. menu. The items in which settings can be made differ depending on the shooting

mode. Refer to Functions Available in Each Shooting Mode (p. 144).

Shooting movies Correct shooting time does not display, or stops. Format the memory card in the camera, or use a memory card capable of

recording at high speeds. Even when the shooting time does not display properly, the video recorded will be the length that it was actually shot (p. 33).

! displayed on the LCD monitor, and shooting ended automatically. Cameras internal memory was insufficient. Try one of the following. Perform a low-level format of the memory card in the camera (p. 52). Lower the recorded pixels (p. 93). Use a memory card capable of recording at high speeds. Zoom does not operate. You can use the digital zoom while recording, but not the optical zoom (p. 94).

Playback Cannot play back images or movies. If the file name or folder structure is changed on a computer, you may not be

able to play back images or movies. Refer to the Personal Printing Guide for information regarding folder structure or file names.

Playback stops, or audio cuts out. Use a card that has been formatted on this camera (p. 22). If you copy a movie to a memory card that reads slowly, playback may interrupt

momentarily. You may experience frame dropping and audio breakup when playing back a

movie on a computer with insufficient system resources.

CO PY

141

If error messages appear on the LCD monitor, try one of the following solutions. No memory card The memory card is not installed in the correct direction. Install the memory card

in the correct direction (p. 16). Card locked! The SD memory card or SDHC memory cards write protect tab is set to Lock.

Unlock the write protect tab (p. 18). Cannot record! You attempted to shoot an image without the a memory card, or with a memory

card installed incorrectly. Install the memory card in the correct direction when shooting (p. 16).

Memory card error (p. 52) Contact your Canon Customer Support Help Desk as there may be a problem

with the camera. Memory card full There is not enough free space on the memory card to shoot (pp. 24, 55, 65, 79)

or edit images (pp. 114 119). Erase the images (pp. 29, 107) to open space for new images, or insert an empty memory card (p. 16).

Change the battery pack (p. 16) No image. There are no images recorded on the memory card that can be displayed. Protected! (p. 110) Unidentified Image/Incompatible JPEG/Image too large./RAW Unsupported images or data, or corrupted image data cannot be displayed. Images manipulated on a computer, that have had their file name changed, or

have been taken with a different camera may not display. Cannot magnify!/Cannot rotate/Cannot modify image/Cannot register this image!/Cannot modify/Cannot assign to category Incompatible images cannot be magnified (p. 104), rotated (p. 114), edited

(pp. 114 119), registered to the start-up screen (p. 136), categorized (p. 112), or added to a print list (p. 121).

Images manipulated on a computer, that have had their file name changed, or have been taken with a different camera may not be magnified, rotated, edited, registered to the start-up screen, categorized, or added to a print list.

Movies cannot be magnified (p. 104), edited (pp. 114 119), or registered to the start-up screen (p. 135).

List of Messages that Appear on the Screen

CO PY

142

List of Messages that Appear on the Screen

Cannot select! When selecting the selection range (pp. 108, 111, 113), you tried to select a

starting image that was after the last image or you tried to select an ending image that was before the starting image.

You tried to select more than 501 images (pp. 108, 111, 113). Too many marks. You selected more than 998 images to print settings. Select less than 998

images (p. 121). Cannot complete! Print settings could not be saved correctly. Reduce the number of settings and

try again (p. 121). Naming error! The file name could not be created because there is an image with the same

name as the folder that the camera is attempting to create, or the highest possible file number has already been reached (p. 129). In the 3 menu, change [File Numbering] to [Auto Reset] (p. 128) or format the memory card (p. 22).

Communication error Images could not be transferred to the computer or printed due to the large

amount of images (approx. 1000) stored on the memory card. Use a commercially available USB card reader to transfer the images. Insert the memory card into the printers card slot to print.

Lens error, restart camera A lens error was detected. Press the power button to turn the camera off and

back on (p. 42). If this error message continues to display, contact your Canon Customer Support Help Desk as there may be a problem with the lens.

This error can occur if you hold the lens while it is in motion or when using it in a location with excessive dust or sand in the air.

Exx (xx: number) A camera error was detected. Press the power button to turn the camera off and

back on (p. 42). If an error code displays directly after taking a picture, the shot may not have

been recorded. Check image in playback mode. If this error code reappears, note the number and contact your Canon Customer

Support Help Desk as there may be a problem with the camera. Please tilt camera gently! The camera was moved with too much force so that the images could not

advance.Tilt the camera gently (p. 27).

CO PY

143

Functions Available in Each Shooting Mode

Shooting modes Function A G I F V

Flash (pp. 59, 67) *2

Focusing Zone (p. 68)

All Range

Exposure Compensation (p. 74)/Exposure Shift (p. 93)

Self-Timer (pp. 63, 64, 76, 77)

*1

AF Lock (p. 82) AE Lock / FE Lock (pp. 83, 84, 93) TV Display (p. 78)

Information Display (p. 44) No Information Display Display Off

FUNC. Menu

ISO Speed (p. 72)

White Balance (p. 73)

My Colors (p. 75)

Metering Mode (p. 83)

Drive Mode (p. 74)

Compression Ratio (Image Quality) (p. 70)

Recording Pixels (pp. 70, 92)

*1 Possible settings: 0 30 seconds in [Delay], and 1 10 shots in [Shots]. *2 Not selectable. However always set to [On] when the flash fires. *3 ISO3200 (p. 58) is set by default. *4 is set by default. *5 is not selectable.

h !

e u

" $

S

W

CO PY

144

Functions Available in Each Shooting Mode

4 E H U t w S y O P Z R T Y x v X > z

*2 *2

FUNC. Menu

*3

*4 *5 *5

Selectable Not selectable

CO PY

145

4 Shooting Menu

Menus

Shooting modes Function A

G I F V

AF Frame (p. 80) Face AiAF Center

AF Frame Size (p. 80) Normal/Small Servo AF (p. 82) On/Off

Digital Zoom (p. 60) Standard/Off 1.5x / 2.0x

AF-Point Zoom (p. 81) On/Off AF-assist Beam (p. 131) On/Off

Flash Settings (p. 86) Red-Eye Corr. On/Off Red-Eye Lamp On/Off

i-Contrast (p. 85) Off/Auto *1 Review (p. 131) Off/2 10 sec./Hold Review Info (p. 131) Off/Detailed/Focus Check Blink Detection On/Off

Disp. Overlay (p. 132) Off/Grid Lines 3:2 Guide/Both

IS Mode (p. 133) Continuous/Off *1 Shoot Only/Panning

Date Stamp (p. 62) Off/Date/Date & Time

*1 Always [On]. *2 Available when h is selected. *3 AiAF only.

C PY

146

Menus

4 E H U t w S y O P Z R T Y x v X > z

*3 *3

*1

*2

Selectable Not selectable

CO PY

147

Menus

3 Set up Menu Item Options/Summary Ref. Page

Mute On/Off* p. 49 Volume Set all operation sounds (5 levels). p. 49

Sound Options Set the sounds played for each camera operation. p. 135

LCD Brightness Set within a range of 2. p. 50 Start-up Image Add an image as start-up image. p. 136 Hints & Tips Display hints and tips for various functions. p. 128 Format Formats card, erasing all data. p. 22 File Numbering Continuous*/Auto Reset p. 128 Create Folder Create New Folder/Auto Create pp. 129, 129 Auto Rotate On*/Off p. 129 Lens Retract 1 min.*/0 sec. p. 130

Power Saving Auto Power Down: On*/Off Display Off: 10, 20 or 30 sec/1*, 2 or 3 min. p. 53

Time Zone Home/World p. 127 Date/Time Date and time settings. p. 20 Video System NTSC/PAL p. 105 Language Select displayed language. p. 21 Reset All Returns camera to default settings. p. 51 * Default setting CO

PY

148

Menus

1 Playback Menu

2 Print Menu

Item Options/Summary Ref. Page Slideshow Plays back images automatically. p. 101 My Category Categorizes images. p. 112 Erase Erases images. p. 107 Protect Protects images. p. 110 i-Contrast Corrects dark portions of images. p. 118 Red-Eye Correction Corrects red eyes in images. p. 119 Trimming Trims portions of images. p. 116 Resize Resizes and saves images. p. 115 My Colors Adjusts colors in images. p. 117 Rotate Rotates images. p. 114 Active Display On*/Off p. 134 Resume Last seen*/Last shot p. 134 Transition Scroll/ Slide/Fade/Off p. 104 * Default setting

Item Options/Summary Ref. Page Print Displays printing screen. p. 30 Select Images & Qty. Selects individual images for printing. p. 122 Select Range Selects starting and ending images for printing. p. 123 Select All Images Selects all images for printing. p. 123 Clear All Selections Cancels all settings for printing. p. 124 Print Settings Sets the printing style. p. 121

CO PY

149

Equipment This camera is a high-precision electronic device. Do not drop it or subject

it to strong impacts. Never place the camera close to magnets or motors that generate strong

electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.

If water droplets have fallen or dirt is stuck on the camera or LCD monitor, wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.

Never use cleaners containing organic solvents to wipe the camera or LCD monitor.

Use a commercially available blower brush to remove dust from the lens. For stubborn dirt contact the closest Canon Customer Support Help Desk as listed on the customer support leaflet supplied with your camera.

When you move the camera rapidly from cold to hot temperatures, condensation may form on the internal or external surfaces of the camera. To avoid condensation, put the camera in an airtight, resealable plastic bag and let it adjust to temperature changes slowly before removing it from the bag.

If condensation has formed, stop using the camera immediately. Continued use may damage the camera. Remove the battery and memory card, and wait until the moisture has completely evaporated before resuming use.

Memory Cards A memory card is a high-precision electronic device. Do not bend, apply

force or subject it to strong impacts. Doing so may corrupt image data recorded on the memory card.

Do not spill liquids on the memory card. Do not touch the memory cards terminals with your hands or metallic objects.

Do not store memory cards near a TV, speakers or other devices that generate magnetic fields or static electricity. Doing so may corrupt image data recorded on the memory card.

Do not store memory cards in hot, humid or dusty locations.

Handling Precautions

CO PY

150

Camera Effective Pixels. . . . . . . . . . .Approx. 12.1 million Image Sensor . . . . . . . . . . . . . . . . . . 1/2.3-inch type CCD (Total number of pixels:

Approx. 12.4 million) Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.0 (W) 20.0 (T) mm

35mm film equivalent: 28 (W) 112 (T) mm F2.8 (W) F5.8 (T)

Digital Zoom. . . . . . . . . . . . . . . . . . . .Approx. 4.0x (Up to approx. 16x in combination with the optical zoom)

LCD Monitor. . . . . . . . . . . . . . . . . . . . 2.8 TFT LCD color monitor with wide viewing angle Approx. 230,000 dots, Picture coverage 100%

AF Frame Mode. . . . . . . . . . . . . . . . .Face AiAF/Center Servo AF . . . . . . . . . . . . . . . . . . . . . .On / Off Focusing Range (from end of lens) . .Normal: 50 cm (1.6 ft.) infinity

Macro: 2 50 cm (W) (0.79 in. 1.6 ft.)/ 30 50 cm (12 in. 1.6 ft.) (T) Infinity: 3 m (9.8 ft.) infinity Digital Macro: 2 10 cm (0.79 3.9 in.) Kids&Pets: 1 m (3.3 ft.) infinity

Shutter . . . . . . . . . . . . . . . . . . . . . . . .Mechanical shutter and electronic shutter Shutter Speed . . . . . . . . . . . . . . . . . . 1 1/1600 sec.

15 1/1600 sec. (Total shutter speed range) Image Stabilization . . . . . . . . . . . . . . Lens-shift type Metering Type . . . . . . . . . . . . . . . . . .Evaluative, Center-weighted average or Spot Exposure Compensation . . . . . . . . . . 2 stops in 1/3-stop increments ISO speed (Standard Output Sensitivity, Recommended Exposure Index) . . . .Auto, ISO 80 / 100 / 200 / 400 / 800 / 1600 White Balance . . . . . . . . . . . . . . . . . .Auto, Day Light, Cloudy, Tungsten, Fluorescent,

Fluorescent H, Custom Built-in Flash . . . . . . . . . . . . . . . . . . .Auto, On, Slow Synchro, Off

Red-eye reduction/Red-eye correction settings available

Built-in Flash Range . . . . . . . . . . . . . 30 cm 4.0 m (12 in. 13 ft.) (W)/ 30 cm 2.0 m (12 in. 6.6 ft.) (T)

Shooting Modes. . . . . . . . . . . . . . . . .Auto, Program AE, Portrait, Night Snapshot, Kids&Pets, Indoor, Sunset, Fireworks, Long Shutter, Beach, Underwater, Aquarium, Foliage, Snow, ISO3200, Digital Macro, Color Accent, Color Swap, Stitch Assist

Continuous Shooting . . . . . . . . . . . . .Approx. 0.8 images/sec. Self-timer . . . . . . . . . . . . . . . . . . . . . .Approx. 10 sec./Approx. 2-sec. delay, Custom

Timer, FaceSelf-Timer i-Contrast . . . . . . . . . . . . . . . . . . . . . .Off/Auto

Specifications

CO PY

151

Specifications

Recording Media . . . . . . . . . . . . . . . .SD memory card, SDHC memory card, MultiMediaCard, MMCplus memory card, HC MMCplus memory card

File Format. . . . . . . . . . . . . . . . . . . . .Design rule for camera file system and DPOF compliant

Data Type . . . . . . . . . . . . . . . . . . . . .Still images: Exif 2.2 (JPEG) Movies: MOV (Image data: H.264, Audio data: Linear PCM) (Mono)

Compression . . . . . . . . . . . . . . . . . . .Fine, Normal Number of Recording Pixels (Still images) . . . . . . . . . . . . . . . . . . .Large: 4000 3000 pixels

Medium 1: 3264 2448 pixels Medium 2: 2592 1944 pixels Medium 3: 1600 1200 pixels Small: 640 480 pixels Widescreen: 4000 2248 pixels

(Movies) . . . . . . . . . . . . . . . . . . . . . . .1280 720 pixels (30 frames/sec.) 640 480 pixels (30 frames/sec.) 320 240 pixels (30 frames/sec.)

Number of Possible Shots . . . . . . . . .Approx. 200 images (Based on CIPA standardized measurement)

Playback Function . . . . . . . . . . . . . . .Single Image, Movie, Magnified Focus, Index, Magnified, Filtered, Slideshow, Active Display

Editing Function . . . . . . . . . . . . . . . . .Erase, Protect, My Category, Resize, My Colors, i-Contrast, Trimming, Rotate, Red-Eye Correction

Direct Print Type . . . . . . . . . . . . . . . .PictBridge Interface . . . . . . . . . . . . . . . . . . . . . . . . Hi-Speed USB (Dedicated connector with unified

type of digital, audio and video*) HDMI (HDMI Mini Connector) * mini-B compatible Video/Audio output (NTSC and PAL capable, mono audio)

Communication Settings . . . . . . . . . .MTP, PTP Power. . . . . . . . . . . . . . . . . . . . . . . . .Battery Pack NB-4L (rechargeable lithium-ion

battery) AC adapter kit ACK-DC10

Operating Temperatures . . . . . . . . . .0 40 C (32 104 F) Operating Humidity . . . . . . . . . . . . . .10 90% Dimensions (excluding protrusions) . .97.9 54.1 22.1 mm (3.85 2.12 0.87 in.) Weight (camera body only) . . . . . . . .Approx. 145 g (5.11 oz.)

CO PY

152

Specifications

Battery Pack NB-4L Type. . . . . . . . . . . . . . . . . . . . . . . . . .Rechargeable lithium-ion battery Voltage. . . . . . . . . . . . . . . . . . . . . . . . 3.7 V DC Capacity. . . . . . . . . . . . . . . . . . . . . . . 760 mAh Charging cycles . . . . . . . . . . . . . . . . .Approx. 300 times Operating temperature. . . . . . . . . . . . 0 40 C (32 104 F) Dimensions . . . . . . . . . . . . . . . . . . . . 35.4 40.3 5.9 mm (1.39 1.59 0.23 in.) Weight . . . . . . . . . . . . . . . . . . . . . . . .Approx. 17 g (0.60 oz.)

Battery Charger CB-2LV/CB-2LVE Rated input . . . . . . . . . . . . . . . . . . . . 100 240 V AC (50/60 Hz), 0.1 A (100 V) 0.06 A

(240 V) Rated output . . . . . . . . . . . . . . . . . . . 4.2 V DC, 0.65 A Charge time . . . . . . . . . . . . . . . . . . . .Approx. 1 hour 30 min. Operating temperature. . . . . . . . . . . . 0 40 C (32 104 F) Dimensions . . . . . . . . . . . . . . . . . . . . 53.0 86.0 19.5 mm (2.09 3.39 0.77 in.) Weight . . . . . . . . . . . . . . . . . . . . . . . .Approx. 60 g (2.09 x 3.39 x 0.77 in.) (CB-2LV)

Approx. 55 g (1.94 oz.) (CB-2LVE, excluding power cord)

All data is based on tests by Canon. The finished product, or exterior may differ from this report.

About MPEG-4 Licensing This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard. * Notice displayed in English as required.

USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery.

When connecting to and using a household power outlet, use only AC Adapter Kit ACK-DC10 (rated input: 100 240 V AC 50/60 Hz, rated output: 4.3 V DC). Using anything else can cause fire, overheating, or electrical shock.

CO PY

153

Numerics 3:2 Guide ................................................ 132

A AC Adapter Kit .................................. 40, 138 Accessories .............................................. 38 AE Lock .................................................... 83 AF Assist Beam ...................................... 131 AF Frame ................................................. 25 AF Focus AF Lock .................................................... 82 Aquarium (Scene Mode) .......................... 57 AV Cable ............................................ 2, 105

B Battery

Battery Charger ........................... 2, 14, 40 Charge Indicator ................................... 15 Charging ............................................... 14 Date/Time Battery ................................. 20 Power Saving ........................................ 53

Beach (Scene Mode) ................................ 57 Black and White Images ........................... 75

C Camera

Default Settings ..................................... 51 Holding .................................................. 13

Camera Shake ................................. 59, 133 Clock Functions ........................................ 53 Color Accent (Scene Mode) ............... 88, 92 Color Swap (Scene Mode) ................. 89, 92 Components Guide .................................. 42 Compression Ratio Image Quality (Compression Ratio) Continuous Shooting ................................ 74 Control Dial ........................................... 8, 43

D Date and Time

Adding to Image .................................... 62 Changing ............................................... 20 Date/Time Battery ................................. 20 Setting ................................................... 19

Date/Time Date and Time Default Settings ........................................ 51 DIGITAL CAMERA Solution Disk ........................................ 2, 35 Digital Macro (Scene Mode) ..................... 69 Digital Tele-Converter .............................. 61 Digital Zoom ............................................. 60 Disp. Overlay .......................................... 132 Display Language ..................................... 21 DPOF ............................................. 120, 121

E Editing

i-Contrast ............................................ 118 My Colors ............................................ 117 Red-Eye Correction ............................ 119 Resizing (Making Images Smaller) ..... 115 Rotating Images .................................. 114 Trimming ............................................. 116

Enlarged Display .................................... 104 Erasing ..................................................... 29 Erasing All Images ................................. 107 Error Messages ...................................... 142 Exposure

AE Lock ................................................. 83 Compensation ....................................... 74 FE Lock ................................................. 84

F Face AiAF ................................................. 80 Face Self-Timer ........................................ 64 FE Lock .................................................... 84 File Number ............................................ 128 Fireworks (Scene Mode) .......................... 57 Flash

Off ......................................................... 59 On ......................................................... 67 Supplementary Flash ............................ 40

Focus AF Frame .............................................. 25 AF Frame Mode .................................... 80 AF Lock ................................................. 82 AF-Point Zoom ...................................... 81 Servo AF ............................................... 82

Index

CO PY

154

Index

Focus Check ...........................................103 Focus Lock ...............................................78 Foliage (Scene Mode) ..............................57 Format (Formatting Memory Cards) .........22 FUNC. Menu

Basic Operations ...................................47 List ......................................................144

G Grid Lines ...............................................132

H High ISO Speed ..................................58, 72 High-Power Flash .....................................40 Histogram .................................................46 Household Power ...................................138

I i-Contrast ..........................................85, 118 Image

Editing Editing Erasing Images .....................................29 Playback Viewing Protect .................................................110

Image Quality (Compression Ratio) .........70 Indicator ..............................................43, 46 Indoor (Scene Mode) ................................57 Infinity .......................................................67 Interface Cable ...............................2, 30, 35 ISO Speed ................................................72 ISO3200 (Scene Mode) ............................58

K Kids&Pets (Scene Mode) .........................56

L Lamp .................................................42, 131 Language Settings ....................................21 LCD Monitor Screen Long Shutter (Scene Mode) .....................87

M Memory Card ............................................18

Available Shots .....................................18 Formatting .............................................22

Number of Recordable Images .............71 Menu

Basic Operations ...................................48 List .......................................................146

Metering Mode ..........................................83 MMCplus/HC MMCplus Memory Card Memory Card Mode Switch .............................................42 Movie

Editing ...................................................95 Estimated Shooting Time ......................93 Image Quality (Frame Rate) ..................92 Mode .....................................................92 Recording Pixels ...................................93 Shooting Time .......................................33 Viewing (Playback) ................................34

MultiMedia Card Memory Card My Category ...........................................112 My Colors .........................................75, 117

N Night Snapshot (Scene Mode) .................56 Number of Shots .......................................15

P panoramic image ......................................90 PictBridge .................................................30 Playback Button ........................................27 Playback Viewing Portrait (Scene Mode) ..............................56 Postcard Size ...........................................71 Power Button ............................................42 Power Battery Power Saving ...........................................53 Print Settings (DPOF) .............................120 Printer .................................................30, 31 Printing .....................................................30 Program AE ..............................................66

R Recording Pixels (Image Size) .................70 Red-Eye

Correction ............................................119 Red-Eye Correction ...............................86 Reduction ............................................130

CO PY

155

Index

Red-Eye Reduction Lamp ...................... 130 Resizing (Making Images Smaller) ......... 115 Rotating Images ..................................... 114

S Scene Mode ............................................. 56 Screen

Display Language ................................. 21 Information Displayed ........................... 44 Menu Operations .................................. 47 Screen ................................................... 48 Switching the Display ...................... 44, 45

SD/SDHC Card Memory Card Self-Timer

10 second Self-Timer ............................ 63 Changing Delay and Number of Shots ................................... 77 Face Self-Timer .................................... 64 Two Second Self-Timer ........................ 76

Sepia Tones ............................................. 75 Servo AF .................................................. 82 Shooting Date and Time Date and Time Shooting Using a TV Monitor ................... 78 Shooting With Macro ................................ 68 Shutter Button .......................................... 23 Slideshow ............................................... 101 Snow (Scene Mode) ................................. 58 Software

DIGITAL CAMERA Solution Disk ..................................... 2, 35 Transferring Images to a Computer ...... 35

sound ....................................................... 49 Stitch Assist (Scene Mode) ...................... 90 Strap ..................................................... 2, 13 Sunset (Scene Mode) ............................... 57 Supplementary Flash ............................... 40

T Terminal ................................... 30, 105, 138 Transferring Images to a Computer ......... 35 Transition ................................................ 104 Trimming ................................................ 116 Troubleshooting ...................................... 139

U Underwater (Scene Mode) ....................... 57 Using When Abroad ................................. 15

V Video Movie Viewing (Playback)

Enlarged Display ................................. 104 Index Display ........................................ 98 Single Image Playback ......................... 27 Slideshow ............................................ 101 Viewing Images on a TV ............. 105, 106

Viewing Images on a TV ................ 105, 106

W Waterproof Case ...................................... 40 White Balance .......................................... 73 Widescreen (Recording Pixels) .......... 70, 71 World Clock ............................................ 127 Wrist Strap Strap

Z Zoom ............................................ 24, 32, 60

CO PY

156

157

MEMO

CO PY

158

MEMO

CO PY

159

MEMO

CO PY

160

MEMO

CO PY

161

MEMO

CO PY

162

MEMO

CO PY

163

Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003.

Rglementation canadienne sur les interfrences radio Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

FCC Notice (Digital Camera, Model PC1356 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

CO PY

Camera User Guide

D IG

ITA L C

A M

ER A

C am

era U ser G

uide

CDI-E396-030 XXXXXXX CANON INC. 2009 PRINTED IN JAPAN

Trademark Acknowledgments The SDHC logo is a trademark. HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC. Disclaimer Reprinting, transmitting, or storing in a retrieval system any part of this

guide without the permission of Canon is prohibited. Canon reserves the right to change the contents of this guide at any

time without prior notice. Illustrations and screenshots in this guide may differ slightly from the

actual equipment. Every effort has been made to ensure that the information contained in

this guide is accurate and complete. However, if you notice any errors or omissions, please contact the Canon customer service center indicated on the customer support list included with the product.

The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.

Battery Charger CB-2LV

This product is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded.

This power unit is intended to be correctly orientated in a vertical or floor mount position.

IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet.

This battery charger is for exclusive use with Battery Pack NB-4L (0.76 Ah). There is a danger of explosion if other battery packs are u

Manualsnet FAQs

If you want to find out how the Digital Canon works, you can view and download the Canon Digital IXUS 110 IS User Guide on the Manualsnet website.

Yes, we have the User Guide for Canon Digital as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Canon Digital. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon Digital IXUS 110 IS User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon Digital IXUS 110 IS User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon Digital IXUS 110 IS User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon Digital IXUS 110 IS User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon Digital IXUS 110 IS User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.