Contents

Canon Digital IXUS 55 Advanced User Guide PDF

1 of 131
1 of 131

Summary of Content for Canon Digital IXUS 55 Advanced User Guide PDF

Camera User Guide Advanced

D IG

ITA L C

A M

ER A

A dvanced C

am era U

ser G uide

Before Using the Camera

Shooting

Playback/Erasing

Print/Transfer Settings

Viewing Images on a TV set

Customizing the Camera

Troubleshooting

List of Messages

This guide explains camera features and procedures in detail.

Appendix

CDI-E196-010 XX05XXX 2005 CANON INC. PRINTED IN JAPAN

ENGLISH

Cov-Advanced.fm Page 1 Friday, July 8, 2005 4:06 PM

Main Features

Shooting Automatically adjusts shooting settings to match particular conditions (Scene mode) Automatically detects camera orientation with an Intelligent Orientation sensor Changes image colors to create special effects (My Colors modes)

Playback Plays movies with sound Auto plays slideshows

Editing Records sound memos for still images Edits movies

Printing Makes printing easy with the Print/Share button Also supports non-Canon brand PictBridge compliant printers

Uses of Recorded Images Effortlessly transfer them to a computer with the Print/ Share button Freely customize the start-up image or start-up sound using the My Camera settings

EC181-CUGBook(Basic-Advanced).book Page 1 Friday, July 8, 2005 4:13 PM

EC181-CUGBook(Basic-Advanced).book Page 1 Friday, July 8, 2005 4:13 PM

Conventions Used in this Guide

1

Icons appearing below titles indicate the modes in which the procedure can be used.

In this guide, the Basic Camera User Guide is referred to as the Basic Guide, and the Advanced Camera User Guide is referred to as the Advanced Guide.

This mark denotes issues that may affect the cameras operation.

This mark denotes additional topics that complement the basic operating procedures.

You can use SD* memory cards and MultiMediaCards with this camera. These cards are collectively called memory cards in this guide. * SD stands for Secure Digital, a copyright protection system.

Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.

See Functions Available in Each Shooting Mode (p. 128).

Continuous Shooting Shooting Mode

Mode Switch

2

EC181-CUGBook(Basic-Advanced).book Page 2 Friday, July 8, 2005 4:13 PM

Table of Contents

Items marked with a are lists or charts that summarize camera functions or procedures.

Please Read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preventing Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 LCD Monitor Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Information Displayed on the LCD Monitor . . . . . . . . . . . . . . 18 Using the Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Formatting Memory Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Setting the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Menus and Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Menu List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Resetting Settings to Their Default Values . . . . . . . . . . . . . . 31

Changing the Resolution and Compression (Still Images) . . 32 Changing Resolutions and Frame Rates (Movies) . . . . . . . . 34 Magnified Close-Up Shooting (Digital Macro) . . . . . . . . . . . . 35 Using the Digital Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Continuous Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Postcard Date Imprint Mode. . . . . . . . . . . . . . . . . . . . . . . . . 38

Using the Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Movie Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Shooting Panoramic Images (Stitch Assist) . . . . . . . . . . . . . 43

Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . .1

Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Before Using the CameraThe Components Guide . . . . .12

Before Using the CameraBasic Operations . . . . . . . . . . .15

Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

EC181-CUGBook(Basic-Advanced).book Page 3 Friday, July 8, 2005 4:13 PM

3

Switching between Focusing Modes . . . . . . . . . . . . . . . . . . .45 Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) . .46 Locking the Exposure Setting (AE Lock) . . . . . . . . . . . . . . . .47 Locking the Flash Exposure Setting (FE Lock) . . . . . . . . . . .48 Switching between Metering Modes . . . . . . . . . . . . . . . . . . .49 Adjusting the Exposure Compensation . . . . . . . . . . . . . . . . .50 Shooting in Long Shutter Mode . . . . . . . . . . . . . . . . . . . . . . .51 Adjusting the Tone (White Balance) . . . . . . . . . . . . . . . . . . . .53 Changing the Photo Effect . . . . . . . . . . . . . . . . . . . . . . . . . . .56 Shooting in a My Colors Mode . . . . . . . . . . . . . . . . . . . . . . . .57

Adjusting the ISO Speed . . . . . . . . . . . . . . . . . . . . . . . . .63 Setting the Auto Rotate Function . . . . . . . . . . . . . . . . . . . . . .64 Creating an Image Destination (Folder) . . . . . . . . . . . . . . . . .65 Resetting the File Number . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Magnifying Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 Viewing Images in Sets of Nine (Index Playback) . . . . . .70 Jumping to Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Viewing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Editing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Rotating Images in the Display . . . . . . . . . . . . . . . . . . . . . . .75 Playback with Transition Effects . . . . . . . . . . . . . . . . . . . . . .76 Attaching Sound Memos to Images . . . . . . . . . . . . . . . . . . . .76 Automated Playback (Slide Shows) . . . . . . . . . . . . . . . . . . . .78 Protecting Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Erasing All Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Setting the DPOF Print Settings . . . . . . . . . . . . . . . . . . . . . .83 Setting the DPOF Transfer Settings . . . . . . . . . . . . . . . . . . . .87

Playback/Erasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Print Settings/Transfer Settings . . . . . . . . . . . . . . . . . . . . . 83

4

EC181-CUGBook(Basic-Advanced).book Page 4 Friday, July 8, 2005 4:13 PM

Changing My Camera Settings . . . . . . . . . . . . . . . . . . . . . . . 90 Registering My Camera Settings . . . . . . . . . . . . . . . . . . . . . . 91

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 When the power is turned on . . . . . . . . . . . . . . . . . . . . . . . . 93 LCD monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Shooting Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Battery/Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 TV monitor output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Battery Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Handling the Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . 107 Using an AC Adapter Kit (Sold Separately) . . . . . . . . . . . . . 109 Using an Externally Mounted Flash (Sold Separately) . . . . 110 Camera Care and Maintenance . . . . . . . . . . . . . . . . . . . . . 112 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Viewing Images on a TV set . . . . . . . . . . . . . . . . . . . . . . . .89

Customizing the Camera (My Camera Settings) . . . . . . . . .90

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

List of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Functions Available in Each Shooting Mode . . . . . . . . . . .128

EC181-CUGBook(Basic-Advanced).book Page 5 Friday, July 8, 2005 4:13 PM

Handling Precautions

5

Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable. Warning Against Copyright Infringement Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty Limitations This cameras warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera.

Please Read

6

EC181-CUGBook(Basic-Advanced).book Page 6 Friday, July 8, 2005 4:13 PM

Video Format Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 89). Language Setting Please see the Basic Guide (p. 4) to change the language setting.

Before using the camera, please ensure that you read the safety precautions described below and in the "Safety Precautions" section of the Basic Camera User Guide. Always ensure that the camera is operated correctly. The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment. Be sure you fully understand them before reading the rest of the manual. Equipment refers to the camera, battery charger or separately sold compact power adapter. Battery refers to the battery pack.

Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots. This has no effect on the recorded image and does not constitute a malfunction.

Safety Precautions

EC181-CUGBook(Basic-Advanced).book Page 7 Friday, July 8, 2005 4:13 PM

7

Warnings

Equipment Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. Store this equipment out of the reach of children and infants.

Wrist strap: Placement of the strap around the child's neck could result in asphyxiation.

Memory card: Dangerous if accidentally swallowed. If this occurs, contact a doctor immediately. Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Stop operating the equipment immediately if it emits smoke or noxious fumes. Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth.

Continued use of the equipment may result in fire or electrical shock. Immediately turn the camera power off and remove the camera battery or unplug the power cord from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk.

Do not use substances containing alcohol, benzine, thinners or other flammable substances to clean or maintain the equipment. Do not cut, damage, alter or place heavy items on the power cord. Use only recommended power accessories. Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. Do not handle the power cord if your hands are wet.

Continued use of the equipment may result in fire or electrical shock.

8

EC181-CUGBook(Basic-Advanced).book Page 8 Friday, July 8, 2005 4:13 PM

Battery Do not place the battery near a heat source or expose it to direct flame or heat. The battery should not be immersed in water or sea water. Do not attempt to disassemble, alter or apply heat to the battery. Avoid dropping or subjecting the battery to severe impacts that could damage the casing. Use only recommended battery and accessories.

Use of battery not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing contact these substances, immediately flush with water and seek medical assistance.

Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging or when they are not in use to avoid fire and other hazards. Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the battery charger while it is charging.

Continued use over a long period may cause the units to overheat and distort, resulting in fire.

Use only the specified battery charger to charge the battery. The battery charger and compact power adapter are designed for exclusive use with your camera. Do not use it with other products or batteries.

There is a risk of overheating and distortion which could result in fire or electrical shock.

Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects.

Contact with the metallic components of other materials in waste containers may lead to fire or explosions.

EC181-CUGBook(Basic-Advanced).book Page 9 Friday, July 8, 2005 4:13 PM

9

Others Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight.

In particular, remain at least one meter (39 inches) away from infants when using the flash.

Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera.

Such items may lose data or stop working.

Cautions

Equipment Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap. Do not store the equipment in humid or dusty areas. Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.

Such conditions could lead to fire, electrical shock or other damage.

Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the specified rating. Do not use if the power cord or plug are damaged, or if not fully plugged into the outlet. Do not use in locations with poor ventilation.

The above-mentioned can cause leakage, overheating or explosion, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing.

When not using the camera for extended periods of time, remove the battery from the camera or battery charger and store the equipment in a safe place.

The battery can run down.

10

EC181-CUGBook(Basic-Advanced).book Page 10 Friday, July 8, 2005 4:13 PM

Flash Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. Be careful not to cover the flash with your fingers or clothing when shooting.

The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.

Do not touch the surface of the flash after taking several pictures in rapid succession.

Doing so could result in burns.

1

EC181-CUGBook(Basic-Advanced).book Page 11 Friday, July 8, 2005 4:13 PM

1

Preventing Malfunctions

Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields.

Exposure to strong magnetic fields may cause malfunctions or corrupt image data.

Avoid Condensation Related Problems When moving the equipment rapidly between hot and cold temperatures, you can avoid condensation by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.

Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces.

If Condensation Forms Inside the Camera Stop using the camera immediately.

Continued use may damage the equipment. Remove the memory card and battery or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use.

12

EC181-CUGBook(Basic-Advanced).book Page 12 Friday, July 8, 2005 4:13 PM

Before Using the CameraThe Components Guide

Front View

A/V OUT (Audio/Video output) Terminal (p. 89) DIGITAL Terminal (Basic Guide p. 19) Terminal Cover (Basic Guide p. 19) Wrist Strap Mount Microphone (p. 76) AF-assist Beam (p. 28) Red-Eye Reduction Lamp (Basic Guide p. 9) Self-Timer Lamp (p. 39) Viewfinder Window (p. 21) Flash (Basic Guide p. 9) Lens

The interface cable and AV cable cannot be connected simultaneously.

3

B efore U

sing the C am

era The C

om ponents G

uide

EC181-CUGBook(Basic-Advanced).book Page 13 Friday, July 8, 2005 4:13 PM

1

* When carrying the camera by the strap, be careful not to swing the camera or catch it on other items.

Back View

LCD Monitor (p. 15) Viewfinder (p. 21) Tripod Socket DC Coupler Terminal Cover Memory Card Slot/Battery Cover (Basic Guide p. 2) Speaker Battery Compartment (Memory Card/Battery Compartment)

Attaching the Wrist Strap*

You can use this toggle to open the terminal cover or memory card slot/battery cover.

How to Open the Terminal Cover

14

EC181-CUGBook(Basic-Advanced).book Page 14 Friday, July 8, 2005 4:13 PM

Operation Panel

Indicators (p. 22) Power Button (Basic Guide p. 5) Power Lamp Zoom Lever (p. 69, Basic Guide p. 9) Shooting: (Wide Angle)/ (Telephoto) Playback: (Index)/ (Magnify) Shutter Button (Basic Guide p. 5) Mode Switch (Basic Guide pp. 5, 6)

(Print/Share) Button (Basic Guide p. 14) DISP. (Display) Button (p. 15) FUNC./SET (Function/Set) Button (p. 26) MENU Button (p. 27)

(Macro)/ (Infinity)/ Button (Basic Guide p. 10) (ISO Speed)/ (Jump)/ Button (pp. 63, 71)

(Flash)/ Button (Basic Guide p. 9) (Single Image Erase)/ (Continuous)/ (Self-timer)/ Button (pp. 37, 39, Basic Guide p. 11)

EC181-CUGBook(Basic-Advanced).book Page 15 Friday, July 8, 2005 4:13 PM

Before Using the CameraBasic Operations

5

B efore U

sing the C am

era B

asic O perations

1

The LCD monitor on or off setting is retained even after the camera power is turned off. The LCD monitor does not shut off in the , , or mode. The LCD monitor will not switch to the detailed display in the index playback mode (p. 70).

Using the LCD Monitor

1 Press . The display mode changes as follows with each press.

In the shooting modes, the shooting information displays for approximately 6 sec. when a setting is changed, regardless of the selected display mode.

Shooting Mode Playback Mode ( or ) ( )

Standard Standard (No Information)

Detailed Detailed (Information View)

Off No Information

16

EC181-CUGBook(Basic-Advanced).book Page 16 Friday, July 8, 2005 4:13 PM

Using the Clock You can display the current date and time for a 5-second* interval using the following two methods. * Default setting

Method 1 Hold the FUNC./SET button down while turning on the power. Method 2 In a shooting mode, hold the FUNC./SET button down.

If you hold the camera horizontally, it displays the time. If you hold it vertically, the time and date display. However, if you hold the camera vertically and use method 1 to display the date and time, the time will be initially displayed in the same way as when the camera is held horizontally.

You can change the display color by pressing the or button. The clock display will cease when the display interval is over or when you operate the FUNC./SET, MENU or shutter button or the mode switch. The clocks display interval can be changed in the (Set up) menu (p. 30).

7

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 17 Friday, July 8, 2005 4:13 PM

1

LCD Monitor Brightness Settings The brightness of the LCD monitor can be changed in the following two ways.

Changing Settings Using the Set up Menu (p. 30) Changing Settings Using the DISP. Button (Quick-bright LCD Function) You can set the LCD monitor to the brightest setting regardless of the option selected in the Set up menu by pressing the DISP button for more than one second.* - To restore the previous brightness setting, press the DISP

button for more than one second again. - The next time you turn on the camera, the LCD monitor will be at

the brightness setting selected in the Set up menu. * You cannot change the brightness of the LCD monitor with this function if

you have already set it to its highest setting in the Set up menu.

Night Display When shooting in dark conditions, the camera automatically brightens the LCD monitor to suit the brightness of the subject*, making it easier to frame the subject. * Noise will appear, and the movements of the subject will appear irregular in

the LCD monitor. The recorded image will not be affected. The brightness of the image displayed in the monitor, and the brightness of the actual image recorded will be different.

LCD Monitor Brightness

18

EC181-CUGBook(Basic-Advanced).book Page 18 Friday, July 8, 2005 4:13 PM

Shooting Information (Shooting mode)

* Appears even if the LCD monitor is set to Standard display.

Information Displayed on the LCD Monitor

Exposure Compensation (p. 50)

Long Shutter Mode (p. 51)

White Balance (p. 53)

Compression (p. 33)

Resolution (pp. 32, 34)

Low Battery (p. 105) Shooting Method (pp. 37, 39)

Shooting Mode (pp. 35, 41, 43, 57, Basic Guide pp. 7, 8)

Spot Frame

Camera Shake Warning (pp. 52, 94)

*

(Red) Movie Recording (p. 41)

Photo Effect (p. 56)

* * * *

Zoom Magnification* (p. 36)

Stills: Recordable Shots Movies (Sec.): Remaining Time/

Elapsed

ISO Speed (p. 63)

Auto Rotate (p. 64)

*

*

Macro/Infinity (Basic Guide p. 10)

AE Lock (p. 47) FE Lock (p. 48)

AF Lock (p. 46)

* *

*

Flash (Basic Guide p. 9)

AF Frame (p. 45)

Frame Rate (Movie) (p. 34)

My Colors (p. 57)

*

Grid Lines* (p. 28)

Metering Mode (p. 49)

(The shutter speed will also display when the displays.)

(Red)*

Create Folder (p. 65)

Time Zone (p. 24)

Exposure Shift Bar (Movie) (p. 43)

*

9

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 19 Friday, July 8, 2005 4:13 PM

1

If the indicator blinks orange and the camera shake icon displays, it indicates there is insufficient illumination and a slow shutter speed will be selected. Raise the ISO speed (p. 63) or select a setting other than (flash off), or attach the camera to a tripod or other device.

Playback Information (Playback Mode)

Standard

Protection Status (p. 82)

WAVE Format Sound (p. 76)

Folder Number-File Number

Shooting Date/Time

Displayed image number Total number of images

Movie (p. 34)

Compression (Still Images) (p. 33)

Resolution (Still Images) (p. 32)

20

EC181-CUGBook(Basic-Advanced).book Page 20 Friday, July 8, 2005 4:13 PM

Detailed

The following information may also be displayed with some images.

Information for images shot on other cameras may not display correctly.

A sound file in a format other than the WAVE format is attached or the file format is not recognized.

JPEG image not conforming to Design rule for Camera File System Standards

RAW image

Unrecognized data type

Exposure Compensation (p. 50)

White Balance (p. 53)

Photo Effect (p. 56)

ISO Speed (p. 63)

Flash (Basic Guide p. 9)

Histogram

Macro/Infinity (Basic Guide p. 10)

My Colors (p. 57)

Long Shutter Mode (p. 51)

File Size

Shooting Mode (pp. 35, 41, 43, 57, Basic Guide pp. 7, 8)

*

Frame Rate (Movies) (p. 34) Resolution (Movies) (p. 34)

Movie Length Shown on Movies (p. 41) Resolution (Still Images) (p. 32)

Metering Mode (p. 49)

1

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 21 Friday, July 8, 2005 4:13 PM

2

The viewfinder can be used to conserve power by turning the LCD monitor off (p. 15) while shooting.

Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 50).

Using the Viewfinder

Sample Histograms

Balanced ImageDark Image Bright Image

Shows the center of the image

Viewfinder

22

EC181-CUGBook(Basic-Advanced).book Page 22 Friday, July 8, 2005 4:13 PM

The indicators light or blink when the power button or the shutter button is pressed.

Upper Indicator Green: Ready to shoot Blinking Green: Image recording/reading/erasing/transferring

(when connected to a computer) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning) Lower Indicator Yellow: Macro mode/infinity mode/AF lock mode Blinking Yellow: Focusing difficulty (camera beeps once)

This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power.

* This time can be changed.

The power saving function will not activate during a slide show or while the camera is connected to a computer. The power saving function settings can be changed (p. 30).

Indicators

Never do the following while an indicator is lit. These actions may corrupt image data. - Shake or jolt the camera - Shut off the power, or open the memory card slot/battery

cover

Power Saving Function

Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on.

Playback Mode Connected to a Printer

Powers down approximately 5 minutes after the last control is accessed on the camera.

3

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 23 Friday, July 8, 2005 4:13 PM

2

You should always format a new memory card or one from which you wish to erase all images and other data.

Low Level Format We recommend you select [Low Level Format] when you think that the recording/reading speed of a memory card has dropped. A low level format may require 2 to 3 minutes with some memory cards.

Formatting Memory Cards

Please note that formatting (initializing) a memory card erases all data, including protected images and other file types.

1 (Set up) Menu [Format]. See Menus and Settings (p. 27).

2 Select [OK] and press . To perform a low level format, use the button to select [Low Level Format] and the or button to add a check mark. You can stop formatting a card when [Low Level Format] is selected by pressing the FUNC./SET button. You can still use a card without problem when formatting is halted, but its data will be erased.

24

EC181-CUGBook(Basic-Advanced).book Page 24 Friday, July 8, 2005 4:13 PM

When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings.

Setting the Home/World Time Zones

Setting the World Clock

1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 27).

2 .

3 Use the or button to select a home time zone

. To set the daylight saving option, use the or button to display

. The time will advance by 1 hour.

4 .

5

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 25 Friday, July 8, 2005 4:13 PM

2

Switching to the Destination Time Zone

If you change the date and time when the World option is selected, the Home date and time will also change automatically.

5 Use the or button to select a destina- tion time zone .

As in Step 3, you can set the day- light saving option.

6 Use the or button to select [Home/ World], and the or button to select

.

1 (Set up) Menu [Time Zone] . See Menus and Settings (p. 27).

2 Use the or button to select .

To change the destination time zone, use the FUNC./SET button.

Time Difference from the Home Time Zone

26

EC181-CUGBook(Basic-Advanced).book Page 26 Friday, July 8, 2005 4:13 PM

Menus are used to set the shooting and playback settings as well as such camera settings as the date/time and electronic beep. The following menus are available.

FUNC. Menu Rec., Play, Set up and My Camera Menus

FUNC. Menu This menu sets many of the common shooting functions.

Slide the mode switch to or . Press the FUNC./SET button. Use the or button to select a menu item. Some items may not be selectable in some shooting modes. Use the or button to select an option for the menu item. You can select further options with the MENU button for some options. After selecting an option, you can press the shutter button to shoot immediately. After shooting, this menu will appear again, allowing you to adjust the settings easily. Press the FUNC./SET button.

Menus and Settings

7

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 27 Friday, July 8, 2005 4:13 PM

2

Rec., Play, Set up and My Camera Menus Convenient settings for shooting or playback can be set with these menus.

Press the MENU button. Use the or button to switch between menus. You can also use the zoom lever to switch between menus. Use the or button to select menu items. Some items may not be selectable in some shooting modes. Use the or button to select an option. Menu items followed by an ellipsis (...) can only be set after pressing the FUNC./SET button to display the next menu. Press the FUNC./SET button again to confirm the setting. Press the MENU button.

(My Camera) Menu

This example shows the Rec. menu. In playback mode, the Play menu displays.

You can switch between menus with the or button when this part is selected.

(Rec.) Menu

(Play) Menu

(Set up) Menu

28

EC181-CUGBook(Basic-Advanced).book Page 28 Friday, July 8, 2005 4:13 PM

FUNC. Menu

Rec. Menu

Menu List

Menu Item Page Menu Item Page

Shooting Mode Basic p. 5 My Colors p. 57

Movie Mode p. 41 Metering Mode p. 49

Exposure Compensation p. 50 Compression p. 33

Long Shutter Mode p. 51 Frame Rate (Movie) p. 34

White Balance p. 53 Resolution (Still Image) p. 32

Photo Effect p. 56 Resolution (Movie) p. 34

Menu Item Options Page/Topic AiAF On*/Off p. 45 Self-timer 10 seconds*/ 2

seconds/ Custom Timer (Delay: 010*, 15, 20, 30 sec.) (Shots: 13*10)

p. 39

AF-assist Beam On*/Off Digital Zoom On/Off*

(On in standard movie mode.)

p. 36

Review Off/2*10 seconds/Hold Basic Guide p. 6 Save Original On/Off* p. 59 Grid Lines On/Off* You can display grid lines

(splits screen into nine areas) to make it easier to judge the horizontal and vertical alignment of a photographic subject and to make composition easier. The lines will not be recorded in the images.

Date Stamp Off*/Date/Date & Time p. 38 Long Shutter On/Off* p. 51

The icons shown below are the default settings.

* Default setting

9

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 29 Friday, July 8, 2005 4:13 PM

2

Play Menu

Set up Menu

Stitch Assist Left to right*/ Right to left p. 43

Menu Item Page Menu Item Page Protect p. 82 Slide Show p. 78

Rotate p. 75 Print Order p. 83

Sound Memo p. 76 Transfer Order p. 87

Erase All p. 82 Transition p. 76

Menu Item Options Page/Topic Mute On/Off* Set to [On] to silence the start-up,

operation, self-timer and shutter sounds all at once. However, warnings still sound even when the mute is set to [On]. (Basic p. 5)

Volume Off/1/2*/3/4/5 Adjusts the volume of the start-up sound, operation sound, self-timer sound, shutter sound and playback sound. The volume cannot be adjusted if [Mute] is set to [On].

Start-up Vol. Adjusts the volume of the start-up sound when the camera is turned on.

Operation Vol. Adjusts the volume of the operation sound that plays when any button other than the shutter button is pressed.

Selftimer Vol. Adjusts the volume of the self-timer sound played 2 sec. before the shutter is released.

Shutter Volume Adjusts the volume of the sound played when the shutter releases. The shutter sound does not play when a movie is recording.

Playback Vol. Adjusts the volume of movie sounds and sound memos.

* Default setting

30

EC181-CUGBook(Basic-Advanced).book Page 30 Friday, July 8, 2005 4:13 PM

LCD Brightness -7 to 0* to +7 Use the or button to adjust the brightness. If you press the or button, the display returns to the Set up menu. You can check the brightness in the LCD monitor while you are adjusting the setting.

Power Saving p. 22 Auto Power Down

On*/Off Sets whether or not the camera automatically powers down after a set period of time elapses without the camera being operated.

Display Off 10 sec./20 sec./ 30 sec./1 min.*/ 2 min./3min.

Sets the length of time before the LCD monitor turns off when no camera operation is performed.

Time Zone Home*/World p. 24 Date/Time Basic Guide p. 4 Clock Display 05*10 sec./20

sec./30 sec./1 min./2 min./3 min.

p. 16

Format p. 23 File Numbering Auto Reset/

Continuous* p. 66

Create Folder p. 65 Create New Folder Check mark

(On)/ No check mark (Off)

Creates a folder for the next shooting session.

Auto Create Off*/Daily/ MondaySunday/ Monthly

You can also set a creation time.

Auto Rotate On*/Off p. 64 Language Basic Guide p. 4 Video System NTSC/PAL p. 89 Reset All p. 31

1

B efore U

sing the C am

era B

asic O perations

EC181-CUGBook(Basic-Advanced).book Page 31 Friday, July 8, 2005 4:13 PM

3

My Camera Menu

Settings cannot be reset when the camera is connected to a computer or to a printer. The following cannot be reset. - Shooting mode - The [Time Zone], [Date/Time], [Language] and [Video

System] options in the (Set up) menu (p. 30) - White balance data recorded with the custom white

balance function (p. 54) - Colors specified in the [Color Accent] (p. 60) or [Color

Swap] (p. 61) modes of My Colors. - Newly added My Camera settings (p. 91)

Menu Item Available Settings Page Theme Selects a common theme for each My Camera

settings item.

p. 90

Start-up Image Sets the image displayed when the camera power is turned on.

Start-up Sound Sets the sound played when the camera power is turned on.

Operation Sound Sets the sound played when any button other than the shutter button is pressed.

Selftimer Sound Sets the sound played 2 seconds before the shutter releases in self-timer mode.

Shutter Sound Sets the sound played when the shutter button is pressed. There is no shutter sound for movies.

My Camera Menu Contents (Off)/ */ /

Resetting Settings to Their Default Values

1 (Set up) Menu [Reset All]. See Menus and Settings (p. 27).

2 Select [OK] and press .

* Default setting

32

EC181-CUGBook(Basic-Advanced).book Page 32 Friday, July 8, 2005 4:13 PM

Shooting

Approximate Values for Resolutions

* Paper sizes vary according to region.

Changing the Resolution and Compression (Still Images)

Shooting Mode

1 FUNC. Menu * (Resolution)/ * (Com- pression).

See Menus and Settings (p. 26). * Default setting.

Use the or button to select resolution/compression settings and press the FUNC./SET button.

Resolution Purpose

(Large) 2592 x 1944 pixels

High Print larger than A4-size prints* 210 x 297 mm (8.3 x 11.7 in.) Print larger than Letter-size prints* 216 x 279 mm (8.5 x 11 in.)

(Medium 1) 2048 x 1536 pixels

Print up to A4-size prints* 210 x 297 mm (8.3 x 11.7 in.) Print up to Letter-size prints* 216 x 279 mm (8.5 x 11 in.)

(Medium 2) 1600 x 1200 pixels

Print postcard-size prints 148 x 100 mm (6 x 4 in.) Print L-size prints 119 x 89 mm (4.7 x 3.5 in.)

(Small) 640 x 480 pixels Low

Send images as e-mail attachments Shoot more images

(Postcard Date Imprint Mode)

1600 x 1200 pixels When printing to postcards (p. 38).

3

Shooting

EC181-CUGBook(Basic-Advanced).book Page 33 Friday, July 8, 2005 4:13 PM

3

Approximate Values for Compression Settings

See Image Data Sizes (Estimated) (p. 118). See Memory Cards and Estimated Capacities (p. 117).

Compression Purpose Superfine High Quality Shoot higher quality images Fine Shoot normal quality images Normal Normal Shoot more images

34

EC181-CUGBook(Basic-Advanced).book Page 34 Friday, July 8, 2005 4:13 PM

You can change the resolution and frame rate when the movie mode is set to (Standard) or (My Colors).

Resolutions and Frame Rates

* Frame rates indicate the number of frames recorded or played back each second. The higher the frame rate, the smoother the appearance of motion.

* The resolution and frame rate are fixed in the and modes.

See Image Data Sizes (Estimated) (p. 118). See Memory Cards and Estimated Capacities (p. 117).

Changing Resolutions and Frame Rates (Movies)

Shooting Mode

1 FUNC. Menu * (Resolution)/ * (Frame Rate).

See Menus and Settings (p. 26). *Default setting.

Use the or button to select a resolution/frame rate and press the FUNC./SET button.

Resolution Frame Rate (frames/sec.)

Standard 640 x 480 pixels My Colors 320 x 240 pixels Fast Frame Rate 320 x 240 pixels Compact 160 x 120 pixels

5

Shooting

EC181-CUGBook(Basic-Advanced).book Page 35 Friday, July 8, 2005 4:13 PM

3

You can shoot a subject 3 10 cm (1.2 3.9 in.) from the end of the lens at the maximum wide angle setting. With the digital zoom, the image area is 9 x 7 mm (0.35 x 0.28 in.) at maximum zoom (approximately 4 times).

Magnified Close-Up Shooting (Digital Macro)

Shooting Mode

1 FUNC. Menu * (Auto) (Digital Macro). See Menus and Settings (p. 26).

*Default setting.

2 Choose the angle of view with the zoom lever and shoot.

36

EC181-CUGBook(Basic-Advanced).book Page 36 Friday, July 8, 2005 4:13 PM

You can shoot zoomed images using the combined digital and optical zooms.

Stills: zoom up to approximately 12 times Movies (Standard): zoom up to approximately 12 times

Images become coarser the more they are digitally zoomed.

Using the Digital Zoom Shooting Mode

The digital zoom cannot be used when the LCD monitor is turned off.

1 (Rec.) Menu [Digital Zoom] [On]. See Menus and Settings (p. 27).

2 Press the zoom lever toward and shoot. The combined digital and optical zoom setting will display in the LCD monitor. When you press the zoom lever toward , the zoom stops when the lens reaches the maximum optical telephoto set- ting (when shooting still images). Press the zoom lever toward again to activate the digital zoom and further zoom the image digitally. Press the zoom lever toward to zoom out.

7

Shooting

EC181-CUGBook(Basic-Advanced).book Page 37 Friday, July 8, 2005 4:13 PM

3

In this mode, the camera shoots continuously while the shutter button is held down. If you use the recommended memory card*, you can shoot continuously (smooth continuous shooting) at a set shooting interval until the memory card is full (p. 117). *Recommended Memory Card Super high speed SDC-512 MSH memory card (sold separately) immediately after a low level format (p. 23). This reflects standard shooting criteria established by Canon. Actual results

may vary according to the subject and shooting conditions. Even if continuous shooting suddenly stops, the memory card may not be

full.

To Cancel Continuous Shooting Press the button twice to display .

The interval between shots lengthens when the built-in memory of the camera fills. If the flash is used, the interval between shots lengthens because the flash must charge.

Continuous Shooting Shooting Mode

1 Press the to display .

2 Shoot. The camera will continue to record successive images while the shutter button is fully pressed. Recording will cease when the shutter button is released.

38

EC181-CUGBook(Basic-Advanced).book Page 38 Friday, July 8, 2005 4:13 PM

You can shoot images with the optimal settings for postcards by composing them inside the print area (width-to-height ratio of approximately 3:2) shown in the LCD monitor.

For printing instructions, refer to the Direct Print User Guide.

Postcard Date Imprint Mode Shooting Mode

1 FUNC. Menu * (Resolution) (Post Card Date Imprint).

See Menus and Settings (p. 26). *Default setting.

The resolution is set to (1600 x 1200) and the compression to

(Fine). When you press the shutter but- ton halfway, the area that will not get printed grays out.

The digital zoom cannot be used in this mode.

Embedding the Date in the Image Data You can embed the date in image data when (Postcard Date Imprint Mode) is selected.

1 (Rec.) Menu [Date Stamp] [Date]/ [Date & Time]. See Menus and Settings (p. 27).

LCD Monitor Display : [Off] : [Date]/[Date & Time]

9

Shooting

EC181-CUGBook(Basic-Advanced).book Page 39 Friday, July 8, 2005 4:13 PM

3

You can set a 10 sec. ( ) or 2 sec. ( ) delay, or a custom delay time and the number of shots ( Custom Timer), for shooting after the shutter button is pressed.

To Cancel the Self-Timer Press the button to display .

You can change the self-timer sound (p. 31).

Ensure that the cameras date/time is set beforehand (p. 30). The date stamp cannot be deleted from the image data once it has been set.

Using the Self-Timer Shooting Mode

1 Press the button to display , or .

2 Shoot. When the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink. When using red- eye reduction, the self-timer lamp will blink and then stay lit for the last 2 seconds.

Changing the Self-Timer Countdown Time ( / )

1 (Rec.) Menu [Self-timer] or . See Menus and Settings (p. 27).

The following occurs with each option. - : 2 sec. before the

shutter releases, the self- timer sound and lamp will speed up.

- :The self-timer sound will play when the shutter but- ton is pressed and the shutter will release 2 sec. later.

40

EC181-CUGBook(Basic-Advanced).book Page 40 Friday, July 8, 2005 4:13 PM

Changing the Delay Time and Number of Shots ( ). You can change the delay time (010, 15, 20, 30 sec.) and number of shots (110). These settings, however, cannot be set for the Stitch Assist mode, movie mode or My Colors modes.

1 (Rec.) Menu [Self-timer] . See Menus and Settings (p. 27).

2 Change [Delay]/[Shots] . The self-timer sound will behave as follows. - The self-timer sound will

start 2 sec. before the specified delay for shoot- ing is over.

- If multiple shots have been specified for the [Shots] option, the sound will play for the first shot only.

If the [Shots] option is set to 2 or more shots, the following occurs. - The exposure and white balance are locked at the

settings selected for the first shot. - If the flash is used, the interval between shots

lengthens because the flash must charge. - The interval between shots lengthens when the built-

in memory of the camera fills. - Shooting will automatically cease if the memory card

becomes full.

1

Shooting

EC181-CUGBook(Basic-Advanced).book Page 41 Friday, July 8, 2005 4:13 PM

4

The following four movie modes are available.

The recording time will vary according to the capacity of the memory card you use (p. 117).

Movie Shooting Shooting Mode

Standard You can select the resolution and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). The digital zoom can be used while shooting in this mode. (p. 36) Resolution: (640 x 480), (320 x 240) Frame Rate: (30 frames/sec.), (15 frames/sec.) Maximum Size: 1 GB/movie

Fast Frame Rate Use this mode to record fast moving subjects, such as in sports photography. Resolution: (320 x 240) Frame Rate: (60 frames/sec.) Maximum Clip Length: 1 minute Compact Since the resolution is low, this mode is convenient for sending movies as e-mail attachments or when the memory card capacity is low. Resolution: (160 x 120) Frame Rate: (15 frames/sec.) Maximum Clip Length: 3 minutes My Colors You can change image colors and then shoot (p. 57). As with the Standard mode, you can also select the resolution and frame rate and record until the memory card is full (when a super high-speed memory card is used, such as the recommended SDC-512MSH). Resolution: (640 x 480), (320 x 240) Frame Rate: (30 frames/sec.), (15 frames/sec.) Maximum Size: 1 GB/movie

42

EC181-CUGBook(Basic-Advanced).book Page 42 Friday, July 8, 2005 4:13 PM

1 FUNC. Menu * (Standard). See Menus and Settings (p. 26).

*Default setting.

Use the or button to select a movie mode and press the FUNC./SET button. In or mode, you can change the resolution and frame rate (p. 34).

2 Shoot. Pressing the shutter button halfway automatically sets the exposure, focus and white balance settings. Pressing the shutter button fully starts recording video and sound simultaneously. During shooting the recording time (in seconds) and [ Rec] appear on the LCD monitor. Pressing the shutter button fully again stops recording. Recording will stop automatically under the following cir- cumstances. - When the maximum recording time elapses - When the built-in memory or memory card become full

You are recommended to use a memory card that has been formatted in your camera to shoot movies (p. 23). The card supplied with the camera may be used without further formatting. Be careful of the following while recording. - Try not to touch the microphone. - Do not press any buttons other than the shutter button.

The sound that buttons make will be recorded in the movie.

- The camera will automatically adjust the exposure and white balance to suit the shooting conditions during recording. Please note, however, that the sounds made by the camera automatically adjusting the exposure may also be recorded.

The focus and optical zoom settings remain fixed for subsequent frames at the values selected for the first frame.

3

Shooting

EC181-CUGBook(Basic-Advanced).book Page 43 Friday, July 8, 2005 4:13 PM

4

Before recording, you can set the AE lock (p. 47) and exposure shift. 1. Press the button.

The exposure will lock (AE lock) and the exposure shift bar will appear in the LCD monitor.

2. Use the or button to adjust the exposure. Press the button again to release the setting. Also, the setting will be canceled if you press the MENU button or change the white balance, photo effect or shooting mode settings.

QuickTime 3.0 or later is required to play back movies (Data type: AVI/Compression method: Motion JPEG) on a computer. QuickTime (for Windows) is included on the Canon Digital Camera Solution Disk. On the Macintosh platform, this program is standard with Mac OS X or later.

Stitch Assist can be used to shoot overlapping images that can later be merged (stitched) to create one panoramic image on a computer.

Shooting Panoramic Images (Stitch Assist)

Shooting Mode

1 (Rec.) Menu [Stitch Assist] . See Menus and Settings (p. 27).

The overlap- ping seams of sev- eral adjacent images can be joined into a single panoramic image.

44

EC181-CUGBook(Basic-Advanced).book Page 44 Friday, July 8, 2005 4:13 PM

Use PhotoStitch, a supplied software program, to merge the images on a computer.

2 Select a shooting direction . You can select from the following two shooting directions. - Left to right horizontally - Right to left horizontally

3 Shoot the first image in the sequence.

The exposure and white balance are set and locked with the first image.

4 Compose the second image so that it over- laps a portion of the first and shoot.

You can retake a shot by pressing the or button and return- ing to the previously recorded image screen. Minor discrepancies in the overlapping portions can be cor- rected when the images are stitched together.

5 Repeat the procedure for additional images. A sequence may contain up to 26 images. Press the MENU button after the last shot.

You cannot display the images on a TV when shooting in Stitch Assist mode. The settings for the first image are applied to the second image onward.

5

Shooting

EC181-CUGBook(Basic-Advanced).book Page 45 Friday, July 8, 2005 4:13 PM

4

You can select between the following two focusing modes according to the AiAF setting.

The focus is locked to the center AF frame when the digital zoom is used. The AF frame appears as follows (when the LCD monitor is on) when the shutter button is pressed halfway. - Green: Shooting preparations complete - Yellow: Focusing difficulty (AiAF set to [Off])

Switching between Focusing Modes

Shooting Mode

(No frame) On The camera detects the subject and highlights the AF frames, from 9 available points, that it will use to determine the focus.

Off The camera focuses using the center AF frame. This is convenient for focusing on a specific part of a subject with greater certainty.

1 (Rec.) Menu [AiAF] [On]/[Off]. See Menus and Settings (p. 27).

46

EC181-CUGBook(Basic-Advanced).book Page 46 Friday, July 8, 2005 4:13 PM

It may be difficult to focus on the following types of subjects. Subjects with extremely low contrast to the surroundings Scenes with a mixture of near and far subjects. Subjects with extremely bright objects at the center of the composition Subjects that are moving quickly Subjects through glass: Try to shoot as close to the glass as possible to reduce the chances of light reflecting back off the glass.

Shooting with the Focus Lock The focus lock can be used in any shooting mode.

Shooting with the AF Lock The AF lock can be used in the , , or mode.

Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock)

Shooting Mode

1 Aim the camera so that an object at the same focal distance as the main subject is centered in the viewfinder or in the AF frame displayed on the LCD monitor.

2 Press the shutter button halfway.

3 Re-aim the camera to compose the shot as desired and press the shutter button fully.

1 Turn on the LCD monitor.

2 Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame.

3 Press the shutter button halfway and press the / button.

The icon will display and the lower indicator will light yellow.

7

Shooting

EC181-CUGBook(Basic-Advanced).book Page 47 Friday, July 8, 2005 4:13 PM

4

To Release the AF Lock Press the / button.

When shooting with the focus lock or AF lock using the LCD monitor, setting [AiAF] to [Off] (p. 28) makes shooting easier since the camera focuses using the center AF frame only. The AF lock is convenient because you can let go of the shutter button to compose the image. Moreover, the AF lock is still effective after the picture is taken, allowing you to capture a second image with the same focus.

You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit.

To Release the AE Lock Press the button.

4 Re-aim the camera to compose the shot as desired and shoot.

Locking the Exposure Setting (AE Lock)

Shooting Mode

You must set the flash to [ ]. The AE lock cannot be set if the flash fires.

1 Turn on the LCD monitor.

2 Focus on the part of the subject on which you wish to lock the exposure setting.

3 Press the shutter button halfway and press the button.

The icon will display.

4 Re-aim the camera to compose the shot as desired and press the shutter button fully.

48

EC181-CUGBook(Basic-Advanced).book Page 48 Friday, July 8, 2005 4:13 PM

AE lock can also be set and released in mode (p. 43). You can use the FE lock when using the flash.

You can lock the flash exposure so that the exposure settings are correctly set regardless of the composition of your subject.

To Release the FE Lock Press the button.

Locking the Flash Exposure Setting (FE Lock) Shooting Mode

1 Turn on the LCD monitor.

2 Press the button and set it to (flash on).

3 Focus on the part of the subject on which you wish to lock the flash exposure setting.

4 Press the shutter button halfway and press the button.

The flash will pre-fire and will display.

5 Re-aim the camera to compose the shot as desired and press the shutter button fully.

9

Shooting

EC181-CUGBook(Basic-Advanced).book Page 49 Friday, July 8, 2005 4:13 PM

4

Metering Methods

Switching between Metering Modes Shooting Mode

1 FUNC. Menu * (Evaluative). See Menus and Settings (p. 26).

*Default setting.

Use the or button to select the metering mode and press the FUNC./SET button.

Evaluative

Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for metering. It evaluates complex lighting conditions, such as the position of the subject, the brightness, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.

Center Weighted Average

Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

Spot

Meters the area within the spot AE point at the center of the LCD monitor. Use this setting when you want to set the exposure on the subject in the center of the monitor.

50

EC181-CUGBook(Basic-Advanced).book Page 50 Friday, July 8, 2005 4:13 PM

Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots.

To Cancel the Exposure Compensation Restore the compensation value to [0].

Exposure compensation is not available in the or My Colors mode. In mode, the exposure shift can be set/canceled (p. 43).

Adjusting the Exposure Compensation

Shooting Mode

1 FUNC. Menu * (Exposure Compensation). See Menus and Settings (p. 26).

*Default setting.

Use the or button to adjust the exposure compensation and press the FUNC./SET button.

1

Shooting

EC181-CUGBook(Basic-Advanced).book Page 51 Friday, July 8, 2005 4:13 PM

5

You can set the shutter speed to a slow setting to make dark subjects appear brighter.

To Cancel the Long Shutter Mode Press the MENU button when the Long Shutter FUNC. menu is displayed.

Shooting in Long Shutter Mode Shooting Mode

1 (Rec.) Menu [Long Shutter] [On]. See Menus and Settings (p. 27).

2 FUNC. Menu * (Exposure Compensation) . See Menus and Settings (p. 26).

*Default setting.

3 Use the or button to select the shutter speed .

The higher the value, the brighter the image and the lower the value, the darker the image.

52

EC181-CUGBook(Basic-Advanced).book Page 52 Friday, July 8, 2005 4:13 PM

Use the LCD monitor to confirm that the image was recorded at the desired brightness. Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. Use of the flash may result in an over-exposed image. If this occurs, shoot with the flash set to . The following are unavailable: - Exposure Compensation - Metering - AE Lock - FE Lock - ISO speed: Auto - Flash: Auto, Auto with Red-Eye Reduction

The nature of CCD image sensors is such that noise in the recorded image increases at long shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. A certain amount of processing time, however, may be required before the next image can be shot.

3

Shooting

EC181-CUGBook(Basic-Advanced).book Page 53 Friday, July 8, 2005 4:13 PM

5

Normally, the (Auto) white balance setting selects an optimal white balance. When the setting cannot produce natural looking colors, change the white balance using a setting appropriate for the light source.

White Balance Settings

Adjusting the Tone (White Balance) Shooting Mode

1 FUNC. Menu * (Auto). See Menus and Settings (p. 26).

*Default setting.

Use the or button to select a white balance setting and press the FUNC./SET button.

Auto Settings are automatically set by the camera Day Light For recording outdoors on a bright day

Cloudy For recording under overcast, shady or twilight skies

Tungsten For recording under tungsten and bulb-type 3- wavelength fluorescent lighting

Fluorescent For recording under warm-white, cool-white or warm- white (3-wavelength) fluorescent lighting

Fluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting

Custom For recording with the optimal white balance data retained in the camera from a white-colored object, such as white paper or cloth

This setting cannot be adjusted when the or photo effect is selected.

54

EC181-CUGBook(Basic-Advanced).book Page 54 Friday, July 8, 2005 4:13 PM

Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth, or a photo-quality gray card that you wish to establish as the standard white color. In particular, take a custom white balance reading for the following situations that are difficult for the (Auto) setting to detect correctly.

Shooting close-ups Shooting subjects of monotone color (such as sky, sea or forest) Shooting with a peculiar source of light (such as a mercury-vapor lamp)

1 FUNC. Menu * (Auto) (Custom). See Menus and Settings (p. 26).

* Default setting.

2 Aim the camera at a piece of white paper or cloth and press .

If you are viewing it with the LCD monitor, ensure that the center frame is completely filled with the white image. If you are using the optical viewfinder, ensure that the entire field is filled.

5

Shooting

EC181-CUGBook(Basic-Advanced).book Page 55 Friday, July 8, 2005 4:13 PM

5

You are recommended to set the shooting mode to and the exposure compensation setting to [0]

before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white). Shoot with the same settings as when reading the white balance data. If the settings differ, the optimal white balance may not be set. In particular, the following should not be changed. - ISO Speed - Flash

Setting the flash to on or off is recommended. If the flash fires when reading the white balance data with the flash set to (auto) or (auto with red-eye reduction), make sure that you also use the flash when you shoot.

Since the white balance data cannot be read in Stitch Assist mode, preset the white balance in another shooting mode beforehand. The camera will retain the custom white balance setting that you record even if you reset the camera to the default settings (p. 31).

56

EC181-CUGBook(Basic-Advanced).book Page 56 Friday, July 8, 2005 4:13 PM

By setting a photo effect before you shoot, you can change the look and feel of the pictures you take.

Photo Effect Settings

Changing the Photo Effect Shooting Mode

1 FUNC. Menu * (Effect Off). See Menus and Settings (p. 26).

*Default setting.

Use the or button to select a photo effect and press the FUNC./SET button.

Effect Off Records normally with this setting.

Vivid Emphasizes the contrast and color saturation to record bold colors.

Neutral Tones down the contrast and color saturation to record neutral hues.

Low Sharpening Records subjects with softened outlines. Sepia Records in sepia tones. B/W Records in black and white.

7

Shooting

EC181-CUGBook(Basic-Advanced).book Page 57 Friday, July 8, 2005 4:13 PM

5

A My Colors mode easily changes the colors in an image when it is shot, allowing you to alter the balance between red, green and blue, transform pale or tanned skin or change a color specified in the LCD monitor into a different color. Since they work with both stills and movies, these modes let you enjoy producing various image or movie effects. However, depending on the shooting conditions, the images may appear rough or you may not get the expected color. Before you try to photograph important subjects, we highly recommend that you shoot trial images and check the results. Moreover, the camera will record both the My Colors image and the original unaltered image if you set [Save Original] (p. 28) to [On].

My Colors Settings

Shooting in a My Colors Mode Shooting Mode

Positive Film

Use this option to make red, green or blue colors more intense like the Vivid Red, Vivid Green or Vivid Blue effects. It can produce intense natural- appearing colors like those obtained with positive film.

Lighter Skin Tone*

Use this option to make skin tones lighter.

Darker Skin Tone*

Use this option to make skin tones darker.

Vivid Blue Use this option to emphasize blue tints. It makes blue subjects, such as the sky or ocean, more vivid.

Vivid Green Use this option to emphasize green tints. It makes green subjects, such as mountains, new growth, flowers and lawns, more vivid.

Vivid Red Use this option to emphasize red tints. It makes red subjects, such as flowers or cars, more vivid.

Color Accent Use this option to have only the color specified in the LCD monitor remain and to transform all others to black and white.

58

EC181-CUGBook(Basic-Advanced).book Page 58 Friday, July 8, 2005 4:13 PM

* The skin colors of non-human subjects may also be altered. * You may not obtain the expected results depending on the skin color.

Color Swap

Use this option to transform a color specified in the LCD monitor into another. The specified color can only be swapped into one other color, multiple colors cannot be chosen.

Custom Color

Use this option to freely adjust the color balance between red, green, blue and skin tones*. It can be used to make subtle adjustments, such as making blue colors more vivid or face colors brighter.

1 FUNC. Menu (My Colors: Stills)/ (My Colors: Movies). See Menus and Settings (p. 26).

2 FUNC. Menu * (Positive Film). See Menus and Settings (p. 26).

*Default setting.

Use the or button to select a My Colors mode.

3 Shoot. Modes

Press the FUNC./SET button. The display will return to the shooting screen and you can shoot.

Modes : See Setting the Camera to the Color Accent Mode (p. 60). : See Setting the Camera to the Color Swap Mode (p. 61). : See Setting the Camera to a Custom Color Mode (p. 62).

Stills Movies

9

Shooting

EC181-CUGBook(Basic-Advanced).book Page 59 Friday, July 8, 2005 4:13 PM

5

The ISO speed will rise with some settings, which may increase the "noise" in the image.

Changing the Save Method for the Original Image When you are shooting still images in a My Colors mode, you can specify whether or not both the altered image and the original image are recorded.

1 (Rec.) Menu [Save Original] [On]/[Off]. See Menus and Settings (p. 27).

If [On] is selected, the two images will be numbered consecutively with the altered image following the original.

When [Save Original] is Set to [On] - Only the altered image is shown in the LCD monitor

during shooting. - The image that appears in the LCD monitor

immediately after recording is the altered image. If you erase the image at this point, the original image is erased along with the altered image. Exercise adequate caution before deleting a file.

- Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off].

60

EC181-CUGBook(Basic-Advanced).book Page 60 Friday, July 8, 2005 4:13 PM

Setting the Camera to the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white.

1 (Color Accent) . See Menus and Settings (p. 26).

The camera will switch to color input mode and the display will alternate between the original image and the color accent image (using the previously set color).

2 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the button.

Only one color can be specified. You can use the or button to specify the range of colors that are retained. -5: Only takes the color that you want to retain +5: Also takes colors close to the one that you want

to retain

3 . This completes the setting. If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode.

The default color accent is green. You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The specified color accent is retained even if the camera's power is turned off.

1

Shooting

EC181-CUGBook(Basic-Advanced).book Page 61 Friday, July 8, 2005 4:13 PM

6

Setting the Camera to the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another.

1 (Color Swap) . See Menus and Settings (p. 26).

The camera will switch to color input mode and the dis- play will alternate between the original image and the color swap image (using the previously set color).

2 Aim the camera so that the original color appears at the center of the LCD monitor and press the button.

Only one color can be specified. You can use the or button to specify the range of colors that are swapped. -5: Only takes the color that you want to swap +5: Also takes colors close to the one that you want

to swap

3 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button.

Only one color can be specified.

Original Color (Before Swapping)

Desired Color (After Swapping)

62

EC181-CUGBook(Basic-Advanced).book Page 62 Friday, July 8, 2005 4:13 PM

4 .

This completes the setting. If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode.

The default setting for color swap mode changes green into white. You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The colors specified in the color swap mode are retained even if the camera's power is turned off.

Setting the Camera to a Custom Color Mode This mode allows you to adjust the color balance for red, green, blue and skin tones.

1 (Custom Color) . See Menus and Settings (p. 26).

2 Use the or but- ton to select [Red], [Green], [Blue] or [Skin Tone] and the or button to adjust the color balance.

The altered color will display.

3 .

This completes the setting. If you press the MENU button at this point, you will return to the screen where you can select a My Colors mode.

Select a color.

Adjust the color balance.

3

Shooting

EC181-CUGBook(Basic-Advanced).book Page 63 Friday, July 8, 2005 4:13 PM

6

Raise the ISO speed when you wish to reduce the effects of camera shake, turn the flash off when shooting in a dark area, or use a fast shutter speed.

Adjusting the ISO Speed Shooting Mode

1 Press the button and switch settings. Cycle through the / / / /Auto ISO speed with each press of the button. Selecting [Auto] sets the sensitivity to produce the optimal image quality.

64

EC181-CUGBook(Basic-Advanced).book Page 64 Friday, July 8, 2005 4:13 PM

Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor.

When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be "up" and the lower end to be "down". It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. When the Auto Rotate function is set to [On] in shooting mode, the orientation of the camera is recorded when the shot is taken. When the Auto Rotate function is set to [On] in playback mode, images will be rotated to their correct orientation in the LCD monitor as needed when the camera's orientation is changed (only applies to images shot when the Auto Rotate function was set to [On]).

Setting the Auto Rotate Function Shooting Mode

1 (Set up) Menu [Auto Rotate] [On]/[Off]. See Menus and Settings (p. 27).

When the Auto Rotate function is set to [On] and the LCD monitor is set to the detailed display mode, the (normal), (right end is down) or

(left end is down) will appear in the display.

This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow is pointing in the right direction and if it is not, then set the Auto Rotate function to [Off]. Even if the Auto Rotate function is set to [On], the orientation of images downloaded to a computer will depend upon the software used to download the images.

5

Shooting

EC181-CUGBook(Basic-Advanced).book Page 65 Friday, July 8, 2005 4:13 PM

6

You can create a new folder at any time and the recorded images will be automatically saved to that folder.

Creates a folder the next time you shoot.

Setting the Day or Time for Automatic Folder Creation

Creating an Image Destination (Folder)

Shooting Mode

Create New Folder Creates a new folder the next time you shoot images. To create an additional folder, insert another check mark.

Auto Create You can also specify a date and time if you wish to create a new folder using a shooting time after the specified date and time (p. 30).

1 (Set up) Menu [Create Folder].

See Menus and Settings (p. 27).

2 Place a check mark beside [Create New Folder] .

displays in the LCD monitor. The symbol will cease to display after the new folder is created.

2 Select a day for the [Auto Create] option and a time in the [Time] option .

displays when the specified time arrives. The symbol will cease to display after the new folder is created.

66

EC181-CUGBook(Basic-Advanced).book Page 66 Friday, July 8, 2005 4:13 PM

Up to 2000 images can be saved into one folder. A new folder will automatically be created when you record more than that number even if you are not creating new folders.

The images you shoot are automatically assigned file numbers. You can select how the file number is assigned.

File Number Reset Function

*When a blank memory card is used. If a memory card with recorded data is used, the 7-digit number for the last recorded folder and image is compared with the last one on the card, and the larger of the two is utilized as the basis for new images.

Resetting the File Number Shooting Mode

1 (Set up) Menu [File numbering] [Auto reset]/[Continuous].

See Menus and Settings (p. 27).

Continuous

A number one higher than the last one recorded is assigned to the next image. This is convenient for managing all your images together on a computer because you avoid file name duplication when changing folders or memory cards.*

Auto reset The image and folder number are reset to the starting value (100-0001).* This is convenient for managing images on a folder-by-folder basis.

7

Shooting

EC181-CUGBook(Basic-Advanced).book Page 67 Friday, July 8, 2005 4:13 PM

6

File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999. Up to 2,000 images can be saved into a single folder.

Images may be saved to a new folder when there is insufficient free space even if the total number of images in a folder is less than 2,000 because the following types of image are always saved together into the same folder. - Images from continuous shooting - Self-timer images (custom) - Stitch Assist mode images - My Colors images ([Save Original] set to [On]) Images cannot be played back when the folder numbers are duplicated or image numbers are duplicated within folders. Please refer to the Software Starter Guide for information regarding folder structures or image types.

New Folder Created Memory Card Exchanged for Another

Continuous

Memory Card 1 Memory Card 1 Memory Card 2

Auto Reset

Memory Card 1 Memory Card 1 Memory Card 2

68

EC181-CUGBook(Basic-Advanced).book Page 68 Friday, July 8, 2005 4:13 PM

EC181-CUGBook(Basic-Advanced).book Page 69 Friday, July 8, 2005 4:13 PM

Playback/Erasing

9

Playback/Erasing

6

Please also see the Basic Camera User Guide (p. 11).

To Cancel the Magnified Display Press the zoom lever toward . (You can also cancel it immediately by pressing the MENU button.)

Magnifying Images

1 Press the zoom lever toward . will display and a

magnified portion of the image will display. Images can be magnified up to a factor of approximately 10x.

2 Use the , , or button to move around the image.

If you press the FUNC./SET button while in magnified display, the camera switches to image advance mode and

will display. You can use the or button to advance to the next or previous image at the same level of magnification. The image advance mode is canceled when you press the FUNC./SET button again. You can change the magnification level with the zoom lever.

Movie frames and index playback images cannot be magnified.

Approximate Location of the Displayed Area

70

EC181-CUGBook(Basic-Advanced).book Page 70 Friday, July 8, 2005 4:13 PM

To Return to Single Image Playback Press the zoom lever toward .

Viewing Images in Sets of Nine (Index Playback)

1 Press the zoom lever toward . Up to nine images can be viewed at once. Use the , , or button to change the image selection.

Switching between Sets of Nine Images The jump bar will display if you press the zoom lever toward while in index playback and you can switch the display between sets of nine images.

Use the or button to move to the previous or next set of nine images. Hold the FUNC./SET button down and press the or button to jump to the first or last set.

Selected Image

Movie

Jump Bar

1

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 71 Friday, July 8, 2005 4:13 PM

7

When you have many images recorded onto a memory card, it is handy to use the five search keys below to jump over images to find the object of your search.

To Return to Single Image Playback Press the MENU button.

Jumping to Images

Jump 10 Images Jumps over 10 images at a time. Jump 100 Images Jumps over 100 images at a time. Jump Shot Date Jumps to the first image of each shooting date. Jump to Movie Jumps to a movie. Jump to Folder Displays the first image in each folder.

1 In single image playback mode, press the button.

The camera will switch to jump search mode. The screen sample will vary slightly according to the search key.

2 Use the or button to select a search key and press the or button.

Number of images matching search key.

Location of image currently being displayed.

72

EC181-CUGBook(Basic-Advanced).book Page 72 Friday, July 8, 2005 4:13 PM

Operating the Movie Control Panel

Use the televisions controls to adjust the volume when playing a movie on a TV set (p. 89). The sound cannot be played in slow motion playback.

Viewing Movies Movies cannot be played in the index playback mode.

1 Display a movie and press .

Images with a icon are movies.

2 Select (Play) and press . The movie will pause if you press the FUNC./SET button during playback. It will resume when you press the button again. When playback ends, the movie stops at the last frame displayed. Press the FUNC./SET button to display the movie control panel.

Ends playback and returns to single image playback

Print (An icon will display when a printer is connected. See the Direct Print User Guide for details.)

Play

Slow Motion Playback (You can use the button to slow down or the button to speed up playback.) Displays the first frame

Previous Frame (Rewinds if the FUNC./SET button is held down)

Next Frame (Fast Forwards if the FUNC./SET button is held down)

Displays the last frame

Edit (Switches to movie editing mode) (p. 73)

Volume Level (Adjust with the or button)

Movie Control Panel

3

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 73 Friday, July 8, 2005 4:13 PM

7

You can delete portions of recorded movies.

Editing Movies

Movies 1 second or longer before editing can be edited in 1- second increments, but those that are protected or less than 1 second long cannot be edited.

1 Select (Edit) in the movie control panel and press .

The movie editing panel and the movie editing bar will display.

2 Use the or button to select (Cut Beginning) or (Cut End) and the or button to specify the cut point( ).

To check a temporarily edited movie, select (Play) and press the FUNC./SET button. Selecting (Exit) cancels the edit and restores the movie control panel.

3 Select (Save) and press .

Movie Editing Bar

Movie Editing Panel

74

EC181-CUGBook(Basic-Advanced).book Page 74 Friday, July 8, 2005 4:13 PM

It may take approximately 3 minutes to save an edited movie. If the battery runs out of charge partway through, edited movie clips cannot be saved. When editing movies, it is recommended to use a fully charged battery or the separately sold AC Adapter Kit ACK-DC10 (p. 109).

4 Select [New File] or [Overwrite] and press .

[New File] saves the edited movie under a new file name. The pre- edit data is left unchanged. Note, if you press the FUNC./SET button while saving the movie, saving is canceled. [Overwrite] saves the edited movie with its original name. The pre-edit data is lost. When there is not enough space left on the memory card, only [Overwrite] can be selected.

5

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 75 Friday, July 8, 2005 4:13 PM

7

Images can be rotated clockwise 90 or 270 in the display.

Rotating Images in the Display

1 (Play) Menu . See Menus and Settings (p. 27).

2 Use the or button to select an image to rotate and press to rotate it.

Cycle through the 90/270/original orientations with each press of the FUNC./SET button. This also can be set in the index playback mode.

Movies cannot be rotated. When images are downloaded to a computer, the orientation of images rotated by the camera will depend upon the software used to download the images.

Original 90 270

76

EC181-CUGBook(Basic-Advanced).book Page 76 Friday, July 8, 2005 4:13 PM

You can select the transition effect displayed when switching between images.

The transition effect will not display when an image is switched while the camera is reading an image from the memory card.

In playback mode (including single image playback and index playback), you can attach sound memos (up to 60 seconds) to an image. The sound data is saved in the WAVE format.

Playback with Transition Effects

The displayed image darkens and the next image gradually brightens until it is displayed. Press the button to have the previous image display from the left and the button to have the next image display from the right.

1 (Play) Menu / . See Menus and Settings (p. 27).

Attaching Sound Memos to Images

1 (Play) Menu . See Menus and Settings (p. 27).

7

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 77 Friday, July 8, 2005 4:13 PM

7

Sound Memo Panel

2 Use the or button to select an image to attach a sound memo to and press .

The sound memo panel will display.

3 Select (Record) and press . The elapsed time and the remaining time display. Pressing the FUNC./SET button pauses the recording. Pressing it again resumes recording. Up to 60 seconds of recordings can be added to any one image.

Exit

Record

Pause

Play

Erase Select [Erase] in the confirmation screen and press the FUNC./SET button.

You cannot attach sound memos to movies. Sound memos for protected images cannot be erased.

Volume (Adjust with the or

button)

Elapsed Time/ Remaining Time

Sound Memo Panel

78

EC181-CUGBook(Basic-Advanced).book Page 78 Friday, July 8, 2005 4:13 PM

Automated Playback of Memory Card Images. Image settings for slide shows are based on the Digital Print Order Format (DPOF) standard (p. 83).

Automated Playback (Slide Shows)

All Images Plays all images on a memory card in order. Date Plays images bearing a specified date in order.

Folder Plays images in a specified folder in order. Movie Plays movie files only, in order. Stills Plays still images only, in order.

Custom 13 Plays the images selected for each slide show, Custom 1, Custom 2 or Custom 3, in order (p. 80).

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select , , , , or . For or , select the image date or folder to be played back (p. 80). For , or , select the images to be played back (p. 80). If you want to add a transition effect to play back images, use the button to select [Effect] and choose the type of effect with the or button (See the next page).

9

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 79 Friday, July 8, 2005 4:13 PM

7

Transition Effects You can select the transition effect used when one image is replaced by another.

In single image playback mode (when displaying a still image), you can start a slide show from the current image displayed by holding the FUNC./SET button while you press the button. Please note that if you do this while the last image shot is displayed, the slide show will start from the first image using the same date.

3 Select [Start] and press . The following functions are available during slide shows. - Pausing/resuming the slide

show: press the FUNC./SET button

- Fast forwarding/rewinding the slide show: press the or button (continue to hold the button to switch between images more rapidly)

- Stopping the slide show: press the MENU button.

The new image gradually brightens as it moves upward from the bottom. The new image first appears in a cross shape and gradually expands to display the full image. Portions of the new image move horizontally, then the image expands to display the full image.

80

EC181-CUGBook(Basic-Advanced).book Page 80 Friday, July 8, 2005 4:13 PM

Selecting an Image Date or Folder for Playback ( / )

1 Select or and press .

2 Use the or button to select the date or folder to be played back and press .

Selecting Images for Playback ( ) Select only the images that you wish to play back and save them as a slide show (Custom 1, 2 or 3). Up to 998 images can be selected. They will be played back in their order of selection.

1 Select , or and press . Only the icon will display at first. When you set , the icon will change to and will display. and

will change in the same way when they are set.

2 Use the or but- ton to move between images for playback and the button to select or deselect them.

You can also select images in the index playback mode. Pressing the MENU button cancels the setting.

Date Folder

Number indicating the selection order

Check mark indicating selection

1

Playback/Erasing

EC181-CUGBook(Basic-Advanced).book Page 81 Friday, July 8, 2005 4:13 PM

8

Selecting All Images 1 After selecting in step 1 (p. 80), use the button

to select [Mark all] and press the FUNC./SET button. 2 Use the button to select [Mark all], press the

FUNC./SET button. 3 Use the button to select [OK] and press the

FUNC./SET button. To deselect all images, select [Reset].

Adjusting the Play Time and Repeat Settings Play Time Sets the duration that each image displays. Choose between 310 seconds, 15 seconds and 30 seconds. Displaying time can vary slightly depending on the image. Repeat Sets whether the slide show stops when all the slides have been displayed or continues until stopped.

1 Select [Set up] and press .

2 Select [Play Time] or [Repeat] and then the desired option.

Pressing the MENU button cancels the setting.

82

EC181-CUGBook(Basic-Advanced).book Page 82 Friday, July 8, 2005 4:13 PM

You can protect important images and movies from accidental erasure.

Please format the memory card when you want to erase not only image data but also all the data contained on the card (p. 23).

Protecting Images

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select an image to protect and press .

Pressing the FUNC./SET button again cancels the setting. You can also protect images in the index playback mode.

Erasing All Images

Note that erased images cannot be recovered. Exercise adequate caution before erasing an image. Protected images cannot be erased with this function.

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select [OK] and press . To exit instead of erasing, select [Cancel].

Protection Icon

EC181-CUGBook(Basic-Advanced).book Page 83 Friday, July 8, 2005 4:13 PM

Print Settings/Transfer Settings

3

Print Settings/Transfer Settings

8

You can select images on a memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for printing on a direct print compatible printer, or for sending the images to a photo developing service that supports DPOF.

Single Images

Setting the DPOF Print Settings

The icon may display for a memory card with print settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select [Order] and press . Selecting [Reset] cancels all print settings for the images.

84

EC181-CUGBook(Basic-Advanced).book Page 84 Friday, July 8, 2005 4:13 PM

All the Images on a Memory Card

3 Select images for printing. Selection methods differ for the Print Type settings (p. 85). - (Standard)/ (Both)

Select an image, press the FUNC./SET button and use the

or button to select the number of print copies (up to 99).

- (Index) Select an image and the press FUNC./SET button to select or deselect it.

You can also select images in the index playback mode.

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select [Mark all] and press . Selecting [Reset] cancels all print settings for the images. One copy of every image will be set to print.

3 Select [OK] and press .

Number of Print Copies

Index Print Selection

5

Print Settings/Transfer Settings

EC181-CUGBook(Basic-Advanced).book Page 85 Friday, July 8, 2005 4:13 PM

8

Images are printed in order according to the file number. A maximum of 998 images can be selected. When [Print Type] is set to [Both], the number of copies can be set. When it is set to [Index], the number of copies cannot be set (only one copy will be printed). Do not set the date in the DPOF print settings when printing images that have had the date embedded with the [Date Stamp] function. This may cause the date to be printed twice.

Setting the Print Style Set the print style after selecting the image to print. The following print settings can be selected.

The output of some printers or photo developing services may not reflect the specified print settings. Print settings cannot be set for movies.

Print Type

Standard Prints one image per page.

Index Prints the selected images together at a reduced size in an index format.

Both Prints the images in both the standard and index formats.

Date Adds the date to the print. File No. Adds the file number to the print.

1 (Play) Menu . See Menus and Settings (p. 27).

86

EC181-CUGBook(Basic-Advanced).book Page 86 Friday, July 8, 2005 4:13 PM

The Date and File No. settings change according to the Print Type as follows. - Index

[Date] and [File No.] cannot be set to [On] at the same time.

- Standard or Both [Date] and [File No.] can be set to [On] at the same time, however, the printable information may vary between printers.

Embedded dates in (Postcard Date Imprint mode) (p. 38) print out even when [Date] is set to [Off]. Dates print in the style specified in the [Date/Time] menu (p. 30).

2 Select [Set up] and press .

3 Select [Print Type], [Date] or [File No.] and then specify the settings.

7

Print Settings/Transfer Settings

EC181-CUGBook(Basic-Advanced).book Page 87 Friday, July 8, 2005 4:13 PM

8

You can use the camera to specify settings for images before downloading to a computer. Refer to the Software Starter Guide for instructions on how to transfer images to your computer. The settings used on the camera comply with the Digital Print Order Format (DPOF) standards.

Single Images

Setting the DPOF Transfer Settings

The icon may display for a memory card with transfer settings set by a different DPOF-compliant camera. These settings will be overwritten by those set by your camera.

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select [Order] and press . Selecting [Reset] cancels all transfer order settings.

3 Select an image to transfer and press . Pressing the FUNC./SET button again deselects the setting. You can also select images in the index playback mode.

Transfer Selection

88

EC181-CUGBook(Basic-Advanced).book Page 88 Friday, July 8, 2005 4:13 PM

All the Images on a Memory Card

Images are transferred in order according to the file number. A maximum of 998 images can be selected.

1 (Play) Menu . See Menus and Settings (p. 27).

2 Select [Mark all] and press . Selecting [Reset] cancels all transfer order settings.

3 Select [OK] and press .

EC181-CUGBook(Basic-Advanced).book Page 89 Friday, July 8, 2005 4:13 PM

Viewing Images on a TV set

9

View ing Im

ages on a TV set

8

You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied AV Cable.

The video output signal can be switched (NTSC or PAL) to accommodate different regional standards (p. 30). The default setting varies between regions. - NTSC: Japan, U.S.A., Canada, Taiwan and others - PAL: Europe, Asia (excluding Taiwan), Oceania and others If the video system is set incorrectly, the camera output may not display properly.

1 Turn off the Camera and the TV.

2 Connect the AV cable to the cameras A/V OUT terminal.

Use the toggle on the wrist strap to open the terminal cover (p. 13) and insert the AV cable all the way.

3 Plug the other ends of the AV cable to the VIDEO IN and AUDIO IN jacks on the TV.

4 Turn on the TV and switch it to video mode.

5 Turn on the camera.

VIDEO AUDIOINYellow

Black

90

EC181-CUGBook(Basic-Advanced).book Page 90 Friday, July 8, 2005 4:13 PM

Customizing the Camera (My Camera Settings)

My Camera allows you to customize the start-up image and start- up, operation, self-timer and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes.

Changing My Camera Settings

1 (My Camera) Menu Menu Item. See Menus and Settings (p. 27).

2 Select the contents you wish to set.

Select [Theme] to set all to the same settings.

1

Custom izing the Cam

era (My Cam era Settings)

EC181-CUGBook(Basic-Advanced).book Page 91 Friday, July 8, 2005 4:13 PM

9

Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computers images and sounds to the camera.

A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera.

Registering My Camera Settings

1 Slide the mode switch to (playback) (My Camera) Menu Menu Item to register.

See Menus and Settings (p. 27).

2 Select or and press .

92

EC181-CUGBook(Basic-Advanced).book Page 92 Friday, July 8, 2005 4:13 PM

See the supplied Software Starter Guide for more information on creating and adding to the My Camera data.

3 Select an image or record a sound. Start-up Image Select the image you wish to reg- ister and press the FUNC./SET button.

Start-up, Operation, Self-timer and Shutter Sounds Select (Record) and press the FUNC./SET button. After record- ing, select (Register) and press the FUNC./SET button. - Recording will automatically

stop when the recording time elapses. - To play it, select (Play). - To exit instead of registering, press (Exit).

4 Select [OK] and press . To cancel registering, select [Can- cel].

The following cannot be registered as My Camera settings. - Movies - Sounds recorded with the sound memo function (p. 76) The prior setting is erased when a new My Camera setting is added.

EC181-CUGBook(Basic-Advanced).book Page 93 Friday, July 8, 2005 4:13 PM

Troubleshooting

3

Troubleshooting

9

Camera

Camera will not operate. Power is not turned on. Press the power button (Basic

Guide p. 5). Memory card slot/battery cover is open.

Confirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 2).

Insufficient battery voltage ("Change the battery pack" message displays).

Insert a fully charged battery into the camera (Basic Guide p. 2). Use the AC Adapter Kit ACK-DC10 (sold separately) (p. 109).

Poor contact between camera and battery terminals.

Polish the terminals with a soft cotton swab before charging or using the battery (p. 105).

Sounds come from the camera interior. The camera's horizontal/ vertical orientation was changed.

The camera's orientation mechanism is operating. There is no malfunction.

When the power is turned on

"Card locked!" message appears. The SD memory card's write protect tab is set to "Write protect".

When recording to, erasing from or formatting the SD memory card, slide the tab upward (p. 107).

The Date/Time menu appears. The built-in rechargeable lithium battery charge is low.

Recharge the built-in battery immediately (Basic Guide p. 4).

94

EC181-CUGBook(Basic-Advanced).book Page 94 Friday, July 8, 2005 4:13 PM

LCD monitor

The display darkens. The image in the LCD monitor will darken in strong sunlight or bright light.

This does not constitute a malfunction and has no effect on images that have been shot.

Display flickers. Display flickers when shot under fluorescent lighting.

This is not a camera malfunction (flickering recorded in movies, but not in still images).

A bar of light (red, purple) appears on the LCD monitor. Subject is too bright. This is a normal occurrence in

devices containing CCDs and does not constitute a malfunction. This bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.

appears. A slow shutter speed has likely been selected because of insufficient lighting.

Raise the ISO speed (p. 63) or set the flash to any setting other than

(flash off), or secure the camera to something, such as a tripod (Basic Guide p. 9).

appears. This displays when using a memory card that has print settings, transfer settings or slide show image selections set by other DPOF-compliant cameras.

These settings will be overwritten by those set by your camera (p. 83).

5

Troubleshooting

EC181-CUGBook(Basic-Advanced).book Page 95 Friday, July 8, 2005 4:13 PM

9

Noise displays./Subject's movements are irregular. Camera automatically lightened the image displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 17).

There is no effect on the recorded image.

Shooting

Camera will not record. Mode switch is set to (playback).

Set the mode switch to or (Basic Guide p. 6).

Flash is charging. The indicator will light orange when it is charged. You can then press the shutter button (p. 22).

Memory card is full. Insert a new memory card (Basic Guide p. 2). If required, download the images to a computer and erase them from the memory card to make space.

Memory card is not formatted correctly.

Format the memory card (p. 23). If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk.

SD memory card is write protected.

Slide the write protect tab of the SD memory card upward (p. 107).

Image Seen in Viewfinder vs. Recorded Image Usually the recorded image contains more of the scene than is seen in the viewfinder.

Confirm the actual image size with the LCD monitor. Use the LCD monitor when taking close-up shots (p. 15).

96

EC181-CUGBook(Basic-Advanced).book Page 96 Friday, July 8, 2005 4:13 PM

Image is blurred or out of focus. AF-assist Beam is set to [Off].

In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 28). Take care not to obstruct the AF-assist Beam with your hand when used.

The camera moves when the shutter button is pressed.

Setting the self-timer to (2 seconds) delays the shutter release for 2 seconds and allows the camera to stop shaking, thus preventing a blurred image (p. 39). Even better results can be obtained by placing the camera on a stable surface or by using a tripod to shoot.

Subject is out of focal range.

Shoot with the subject at the correct shooting distance (p. 113).

The subject is hard to focus on.

Use the focus lock or AF lock to shoot (p. 46).

Subject in recorded image is too dark. Insufficient light for shooting.

Set the flash to (flash on) (Basic Guide p. 9).

Subject is dark in contrast to the background.

Set the exposure compensation to a positive (+) setting (p. 50). Use AE lock or use the spot metering function (pp. 47, 49).

Subject is too far away for flash to reach.

Shoot within correct shooting distance of the subject when using the built-in flash (p. 114). Raise the ISO speed and then shoot (p. 63).

7

Troubleshooting

EC181-CUGBook(Basic-Advanced).book Page 97 Friday, July 8, 2005 4:13 PM

9

Subject in recorded image is too bright. Subject is too close, making the flash too strong.

Shoot within correct shooting distance of the subject when using the built-in flash (p. 114).

Subject is bright in contrast to the background.

Set the exposure compensation to a negative (-) setting (p. 50). Use AE lock or use the spot metering function (pp. 47, 49).

Too much light is shining directly into the camera, or is being reflected off the subject.

Change the shooting angle.

Flash is set to on. Set the flash to (flash off) (Basic Guide p. 9).

Image flashes white. Image contains noise. ISO speed is too high. Higher ISO speeds increase image

noise. To take clean images, use as low an ISO speed as possible (p. 63). In , , , and modes, the ISO speed increases and noise can appear.

White dots appear on the image. Light from the flash has reflected off dust particles or insects in the air. This is particularly noticeable when shooting using the wide angle.

This is a phenomenon that occurs with digital cameras and does not constitute a malfunction.

98

EC181-CUGBook(Basic-Advanced).book Page 98 Friday, July 8, 2005 4:13 PM

Eyes appear red. Light reflecting back from eyes can make them appear red when the flash is used in dark areas.

Use the (auto with red-eye reduction) mode (Basic Guide p. 9). For this mode to be effective, the subject must be looking right at the red-eye reduction lamp. Try asking them to look directly at the lamp. Even better results can be obtained by increasing the lighting in indoor settings or approaching closer to the subject. The shutter will not activate for approximately 1 second after the red-eye reduction lamp fires in order to improve the effect.

Continuous shooting slows down. The memory card's performance has dropped.

To enhance the continuous shooting performance, you are recommended to format the memory card in the camera after you save all its images to your computer (p. 23).

Recording images to memory card takes a long time. Memory card was formatted in another device.

Use a memory card formatted in your camera (p. 23).

Lens will not retract. Memory card slot/battery cover was opened with power on.

First close the memory card slot/ battery cover and then turn the power off (Basic Guide p. 2).

9

Troubleshooting

EC181-CUGBook(Basic-Advanced).book Page 99 Friday, July 8, 2005 4:13 PM

9

Shooting Movies

The recording time may not display properly or filming may stop unexpectedly. The following types of memory cards are used.

- Slow recording cards. - Cards formatted on a

different camera or a computer.

- Cards which have had images recorded and erased repeatedly.

Although the recording time may not display properly during shooting, the movie will be recorded correctly on the memory card. Recording time will display properly if you format the memory card in this camera (excluding slow recording memory cards) (p. 23).

"!" displays frequently in the LCD monitor. If free space in the camera's built-in memory becomes too scarce, the "!" symbol will display on the LCD monitor in red and the camera will automatically cease filming shortly thereafter.

Try the following procedures. - Reformat the memory card before

filming (p. 23). - Lower the resolution or frame rate

(p. 34). - Use a high-speed memory card

(SDC-512MSH, etc.).

Zoom does not operate. Zoom lever was pressed while shooting in movie mode.

Operate the zoom before shooting in movie mode (Basic Guide p. 9). Note the digital zoom is available while shooting, but only in Standard movie mode (p. 36).

100

EC181-CUGBook(Basic-Advanced).book Page 100 Friday, July 8, 2005 4:13 PM

Playback

Cannot play back. You attempted to play back images shot with another camera or images edited with a computer.

Computer images that cannot be played back will play back if they are added to the camera using the supplied software program ZoomBrowser EX or ImageBrowser. See ZoomBrowser EX/ ImageBrowser Software User Guide (PDF).

File name was changed with a computer or file location was changed.

Set the file name or location on the file format/structure of the camera. (Refer to the Software Starter Guide for details).

Movies cannot be edited. Some movies shot with another camera cannot be edited. Movies do not play back correctly. Movies recorded with high resolutions and frame rates may momentarily stop playing if played on slow reading memory cards. You may experience frame dropping and audio breakup when playing back a movie on a computer with insufficient system resources. Movies recorded at the

Fast Frame Rate setting and with the video signal set to the PAL format, may play back with a frame rate lower than the recorded one when output to a TV or video. You can play every frame by using the slow motion playback.

To check the images at the original frame rate, you are recommended to play the movie back on the camera's LCD monitor or on a computer.

01

Troubleshooting

EC181-CUGBook(Basic-Advanced).book Page 101 Friday, July 8, 2005 4:13 PM

1

Reading images from memory card is slow. Memory card was formatted in another device.

Use a memory card formatted in your camera (p. 23).

Battery/Battery Charger

Battery consumed quickly. Battery life exceeded if battery loses its charge quickly at normal temperature (23 C/73 F).

Replace the battery with a new one (Basic Guide p. 2).

Battery will not charge. Battery life exceeded. Replace the battery with a new one

(Basic Guide p. 2).

TV monitor output

Image not showing on TV monitor. Incorrect video system setting.

Set the video system to the appropriate setting, NTSC or PAL, for your TV (p. 30).

Shooting in Stitch Assist mode.

The output will not appear on a TV in Stitch Assist mode. Cancel the Stitch Assist mode (Basic Guide p. 6).

102

EC181-CUGBook(Basic-Advanced).book Page 102 Friday, July 8, 2005 4:13 PM

List of Messages

The following messages may appear on the LCD monitor during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection.

Busy...

Image is being recorded to, or read from, memory card. The playback mode is starting up.

No memory card

You turned on the camera without a memory card installed. Card locked!

The SD memory card is write-protected. Cannot record

You attempted to shoot an image without a memory card installed, or attempted to attach a sound memo to a movie.

Memory card error

Memory card has experienced an anomaly. Memory card full

Memory card is full of images and no more can be recorded or saved. Or no more image settings or sound memos can be recorded.

Naming error!

The image could not be created because there is an image with the same name as the directory that the camera is attempting to create, or the highest possible file number has already been reached. In the Set up menu, set the File Numbering option to [Auto Reset]. Save all the images you wish to retain onto a computer, then reformat the memory card. Please note that formatting will erase all the existing images and other data.

03

List of M essages

EC181-CUGBook(Basic-Advanced).book Page 103 Friday, July 8, 2005 4:13 PM

1

Change the battery pack.

Battery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery.

No image.

No images recorded on memory card. Image too large.

You attempted to play back an image larger than 4992 x 3328 pixels or with a large data size.

Incompatible JPEG format.

You attempted to play back an incompatible JPEG image. Corrupted Data.

You attempted to play back an image with corrupted data. RAW

You attempted to play back a RAW image. Unidentified Image

You attempted to play back an image that was recorded in a special data type (proprietary data type used by the camera of another manufacturer, etc.) or a movie clip recorded by another camera.

Cannot magnify!

You attempted to magnify an image recorded in a different camera or data type, an image edited with a computer, or a movie.

Cannot rotate

You attempted to rotate an image recorded in a different camera or data type, an image edited with a computer, or a movie.

Incompatible WAVE format.

A sound memo cannot be added to this image since the data type of the existing sound memo is incorrect.

104

EC181-CUGBook(Basic-Advanced).book Page 104 Friday, July 8, 2005 4:13 PM

Cannot register this image!

You attempted to register an image recorded in a different camera or a movie as a start-up image.

Protected!

You attempted to erase or edit a protected image, movie or sound memo.

Too many marks.

Too many images have been marked with print settings, transfer settings or slide show settings. Cannot process any more.

Cannot complete!

Could not save the print, transfer or slide show settings. Unselectable image.

You attempted to set the print settings for a non-JPEG image. Exx

(xx: number) Camera malfunction. Turn the power off and then back on, then shoot or play back. A problem exists if the error code reappears. Note the number and contact your Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in playback mode.

EC181-CUGBook(Basic-Advanced).book Page 105 Friday, July 8, 2005 4:13 PM

Appendix

05

A ppendix

1

Battery Handling

Battery Charge The following icon and message will display.

Battery Handling Precautions Keep the battery terminals clean at all times. Dirty terminals may cause poor contact between the battery and camera. Polish the terminals with a soft cotton swab before charging or using the battery. At low temperatures, battery performance may be reduced and the low battery icon ( ) may appear earlier than usual. Under these conditions, revive the battery by warming it in a pocket immediately before use. However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key ring, etc. The battery may be short circuiting. Do not allow any metal objects such as key rings to touch the ( ) and ( ) terminals (Fig. A). To carry the battery or store it during periods of disuse, always replace the terminal cover (Fig. B). These conditions can damage the battery.

Battery charge is low. Recharge it as soon as possible it will be used for an extended period.

Change the battery pack

Battery charge is insufficient to operate the camera. Replace the battery immediately.

Fig. A Fig. B

106

EC181-CUGBook(Basic-Advanced).book Page 106 Friday, July 8, 2005 4:13 PM

You may be able to check the charge state depending upon how the terminal cover is attached (Fig. C, D).

You are recommended to use it in the camera until it is completely discharged and to store it in an indoor location with low relative humidity and between the temperatures of 0 30 C (32 86 F). Storing a fully charged battery for long periods of time (about one year) may shorten its life cycle or affect its performance. If you do not use the battery for long periods of time, charge it fully and discharge it fully in the camera about once a year before returning it to storage.

Charging the Battery Since this is a lithium-ion battery, you need not completely discharge it before recharging. It can be recharged at any point. It takes approximately 90 minutes to fully charge the battery from a fully discharged state (based on Canons testing standards). Charging it within a temperature range of 5 40 C (41 104

F) is recommended. Charge times may vary according to the ambient temperature

and the battery's charge state. You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. Even charged batteries continue to discharge naturally. If the performance of the battery diminishes substantially even when it is fully charged, its life has been exceeded and it should be replaced.

Fig. C Fig. D

Charged Battery Attach it so the is visible

Spent Battery Attach it the opposite way to Fig. C.

07

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 107 Friday, July 8, 2005 4:13 PM

1

Handling the Memory Card

Write Protect Tab

Cautions When Handling Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card. Do not allow dirt, water or foreign objects to contact the terminals on the back of the card. Do not touch the terminals with your hands or metal objects. Do not peel away the original label on the memory card or cover it with another label or sticker. When writing on the memory card, do not use a pencil or ball-point pen. Only use a soft point pen (e.g. felt-tip pen). Do not use or store memory cards in the following locations. Locations subject to dust or sand Locations subject to high humidity and high temperatures Since some or all of the data recorded on the memory card may be corrupted or erased by electrical noise, static electricity, or camera or card malfunction, making a backup copy of important data is recommended.

Slide the switch up.

Slide the switch down (you can protect the images and other data on the card)

Write Protect Tab

Writing/Erasing Possible Writing/Erasing Impossible

108

EC181-CUGBook(Basic-Advanced).book Page 108 Friday, July 8, 2005 4:13 PM

Formatting Please note that formatting (initializing) an memory card erases all data, including protected images. You are recommended to use memory cards that have been formatted in your camera. The card supplied with the camera may be used without further

formatting. When the camera is malfunctioning, a corrupted memory card

might be the cause. Reformatting the memory card may solve the problem.

When a non-Canon brand memory card is malfunctioning, reformatting it may solve the problem.

Memory cards formatted in other cameras, computers, or peripheral devices may not operate correctly in this camera. When that happens, reformat the memory card with this camera.

If formatting in the camera does not work properly, turn the camera off and re-insert the memory card. Then turn the camera back on and format again.

09

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 109 Friday, July 8, 2005 4:13 PM

1

It is best to power the camera with AC Adapter Kit ACK-DC10 (sold separately) when you are using it for long periods of time or connecting it to a computer.

Using an AC Adapter Kit (Sold Separately)

Turn the camera power off before connecting or disconnecting the AC adapter.

1 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet.

2 Open the memory card slot/battery cover, then insert the DC coupler until it is locked.

Slide the memory card slot/battery cover closed.

3 Open the DC coupler termi- nal cover and attach the cord to the DC terminal.

Compact Power Adapter CA-DC10

Battery Lock

DC Coupler DR-10

110

EC181-CUGBook(Basic-Advanced).book Page 110 Friday, July 8, 2005 4:13 PM

High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. Use the following procedures to affix the camera and High-Power Flash to the supporting bracket. Please read the instructions accompanying the flash along with this explanation.

Using an Externally Mounted Flash (Sold Separately)

The flash charge time will lengthen as the battery charge gets weaker. Always set the power/mode switch to [OFF] when you finish using the flash. Be careful not to touch the flash window or sensor windows with your fingers while the flash is in use. The flash may fire if another flash is being used in close proximity. The High-Power Flash may not fire outdoors in daylight or when there are no reflective items. For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the camera and flash resulting in damage to both.

Tripod Sockets

Bracket (Comes with the flash)

11

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 111 Friday, July 8, 2005 4:13 PM

1

Before attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the cameras front panel. A tripod can be used even when the flash is attached.

Batteries Charge becomes Severely Limited If the battery usage time has considerably diminished, wipe the battery terminals well with a dry cloth. The terminals may be dirty from fingerprints. Usage in Cold Temperatures (Less than 0C/32F) Get a spare generic lithium battery (CR123A or DL123). You are recommended to place the spare battery in your pocket to warm it up before switching it for the battery in the flash. Non-Use over Extended Periods Leaving batteries in the High-Power Flash could allow the battery fluid to leak, damaging the product. Remove the batteries from the High-Power Flash and store them in a cool, dry place.

112

EC181-CUGBook(Basic-Advanced).book Page 112 Friday, July 8, 2005 4:13 PM

Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper.

Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth.

Viewfinder and LCD Monitor Use a lens blower brush to remove dust and dirt. If necessary, gently wipe with a soft cloth or an eyeglass lens wiper to remove stubborn dirt.

Camera Care and Maintenance

Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment.

Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk as listed on the separate Canon Customer Support leaflet.

Never rub or press strongly on the LCD monitor. These actions may damage it or lead to other problems.

13

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 113 Friday, July 8, 2005 4:13 PM

1

All data is based on Canons standard testing methods. Subject to change without notice.

PowerShot SD450 DIGITAL ELPH/DIGITAL IXUS 55

Specifications

(W): Max. wide angle (T): Max. telephoto Camera Effective Pixels

Approx. 5.0 million

Image Sensor 1/2.5-inch CCD (Total number of pixels: Approx. 5.3 million)

Lens 5.8 (W) 17.4 (T) mm (35mm film equivalent: 35 (W) 105 (T) mm) f/2.8 (W) f/4.9 (T)

Digital Zoom Approx. 4.0x (Up to approx. 12x in combination with the optical zoom)

Optical Viewfinder Real-image zoom viewfinder LCD Monitor 2.5-inch, low-temperature polycrystalline silicon

TFT color LCD, approx. 115,000 pixels (Picture coverage 100%)

AF System TTL autofocus Focusing frame: 9-point AiAF/1-point AF (fixed to center)

Shooting Distance (From the front of the lens)

Normal: 30 cm (1.0 ft.) infinity Macro: 3 50 cm (W)/30 50 cm (T)

(1.2 in. 1.6 ft. (W)/1.0 1.6 ft. (T)) Infinity: 3 m (9.8 ft.) infinity

Shutter Mechanical shutter + electronic shutter Shutter Speeds 15 1/1500 sec.

The shutter speed varies according to the shooting mode. Slow shutter speeds of 1.3 sec. or slower operate with noise reduction.

Metering System Evaluative, Center-weighted average or Spot (fixed to center)

Exposure Compensation

2 stops in 1/3-stop increments

ISO Speed Auto*, ISO 50/100/200/400 equivalent * Camera automatically sets the optimal speed.

114

EC181-CUGBook(Basic-Advanced).book Page 114 Friday, July 8, 2005 4:13 PM

White Balance Auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom

Built-in Flash Auto, auto with red-eye reduction, flash on with red-eye reduction, flash on, flash off, slow synchro

Flash Range Normal: 50 cm 3.5 m (1.6 12 ft.) (W), 50 cm 2.0 m (1.6 6.6 ft.) (T)

Macro: 30 50 cm (1.0 1.6 ft.) (W/T) (When ISO speed is set to AUTO.)

Shooting Modes (Still images)

Auto, Manual1, Digital macro, Portrait, Night Snapshot, My Colors, Scene Mode2, Stitch assist3 1 Long shutter mode available 2 Kids&Pets, Indoor, Foliage, Snow, Beach,

Fireworks, Underwater 3 Selectable in Manual mode.

(Movies) Standard, Fast Frame Rate, Compact, My Colors Continuous Shooting

Approx. 2.1 shots/sec. (Large/Fine mode)

Self-timer Activates shutter after an approx. 10-sec./ approx. 2-sec. delay, Custom Timer

Recording Media SD memory card/MultiMediaCard This camera has been tested with memory cards through 2GB. All memory card functions cannot be guaranteed.

File Format Design rule for camera file system and DPOF compliant

Data Type (Still images) (Movies)

Exif 2.2 (JPEG)*1 AVI (Image data: Motion JPEG; Audio data: WAVE (monaural))

Compression Superfine, Fine, Normal Number of Recording Pixels

(Still Images)

Large: 2592 x 1944 pixels Medium 1: 2048 x 1536 pixels Medium 2: 1600 x 1200 pixels Small: 640 x 480 pixels Postcard Date Imprint Mode:1600 x 1200 pixels

15

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 115 Friday, July 8, 2005 4:13 PM

1

Number of Recording Pixels

(Movies)

Standard, My Colors: 640 x 480 pixels (30 frames/sec., 15 frames/sec.) 320 x 240 pixels (30 frames/sec., 15 frames/sec.)

Recording can continue until the memory card is full* (can record up to a maximum of 1 GB at one time). Fast Frame Rate: (can record for 1 min.)

320 x 240 pixels (60 frames/sec.) Compact: (can record for 3 min.)

160 x 120 pixels (15 frames/sec.) * Using super high-speed memory cards (SDC-

512MSH recommended). Playback Modes Single (histogram displayable), Index (9

thumbnail images), Magnified (approx. 10x (max.) in LCD monitor, advance or reverse through magnified images possible), Jump (jumps to every tenth or hundredth image, to the first image of those sharing a certain shooting date, to movies, or to the first image in a folder. In index playback mode, it displays 9 images at once.), Sound memos (up to 60 sec.), Slide show or Movie (edit/slow motion play back possible).

Direct Print PictBridge compliant, and Canon Direct Print and Bubble Jet Direct compatible

My Camera Settings Start-up image, start-up sound, operation sound, self-timer sound, and shutter sound.

Interface USB 2.0 Hi-Speed (mini-B), PTP (Picture Transfer Protocol) Audio/Video output (NTSC or PAL selectable, monaural audio)

Power Source Battery Pack NB-4L (Lithium-ion Rechargeable battery) AC Adapter Kit ACK-DC10

Operating Temperature

0 40 C (32 104 F)

Operating Humidity 10 90% Dimensions 86.0 x 53.5 x 21.6 mm (3.39 x 2.11 x 0.85 in.) Weight Approx. 140 g (4.93 oz.) (camera body only)

116

EC181-CUGBook(Basic-Advanced).book Page 116 Friday, July 8, 2005 4:13 PM

*1 This digital camera supports Exif 2.2 (also called Exif Print). Exif Print is a standard for enhancing the communication between digital cameras and printers. By connecting to an Exif Print-compliant printer, the cameras image data at the time of shooting is used and optimized, yielding extremely high quality prints.

Battery Capacity (Battery Pack NB-4L (Fully charged))

The actual figures will vary according to the shooting conditions and settings. Movie data is excluded. At low temperatures, the battery performance may diminish and the low battery icon may appear very rapidly. In these circum- stances, the performance can be improved by warming the bat- tery in a pocket before use.

Test Conditions Shooting: Normal temperature (23 C 2 C/73 F 3.6 F),

normal relative humidity (50% 20%), alternating wide angle end and telephoto end shots at 30 second intervals with the flash fired once every two shots and the camera power turned off after every tenth shot. Power is left off for a sufficient amount of time*, then the power is turned back on and the testing procedure is repeated.

A Canon-brand memory card is used. *Until the battery returns to normal temperature

Playback: Normal temperature (23 C 2 C/73 F 3.6 F), normal relative humidity (50% 20%), continuous playback at 3 seconds per image.

See Battery Handling Precautions (p. 105).

Number of Images Shot

Playback TimeLCD Monitor ON (Based on the CIPA

standard) LCD Monitor Off

Approx. 150 images Approx. 500 images Approx. 3 hours

17

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 117 Friday, July 8, 2005 4:13 PM

1

Memory Cards and Estimated Capacities : Card included with the camera

Capable of smooth continuous shooting (p. 37) (*Only available when card has been formatted with a low level format).

This reflects standard shooting criteria established by Canon. Actual results may vary according to the subject and shooting conditions.

Movie

* Maximum movie clip length at : 1 min., at : 3 min. The figures indicate the maximum continuous recording time.

Resolution Compression SDC-16M SDC-128M SDC-512MSH

(Large) 2592 x 1944 pixels

5 49 190* 9 87 339 19 173 671

(Middle 1) 2048 x 1536 pixels

8 76 295 15 136 529 30 269 1041

(Middle 2) 1600 x 1200 pixels

13 121 471 24 217* 839 46 411 1590

(Small) 640 x 480 pixels

52 460 1777 80 711 2747 127 1118 4317

(PostCard Date Imprint Mode)

1600 x 1200 pixels 24 217* 839

Resolution Frame Rate SDC-16M SDC-128M SDC-512MSH

Standard 640 x 480 pixels

6 sec. 1 min. 4 sec. 4 min. 9 sec. 14 sec. 2 min. 7 sec. 8 min. 14 sec.

My Colors 320 x 240 pixels

20 sec. 3 min. 1 sec. 11 min. 42 sec. 40 sec. 5 min. 55 sec. 22 min. 53 sec.

Fast Frame Rate 320 x 240 pixels 10 sec. 1 min. 32 sec. 5 min. 59 sec.

Compact 160x 120 pixels 1 min. 39 sec. 14 min. 29 sec. 55 min. 57 sec.

118

EC181-CUGBook(Basic-Advanced).book Page 118 Friday, July 8, 2005 4:13 PM

Image Data Sizes (Estimated)

Resolution Compression

(2592 x 1944 pixels) 2503 KB 1395 KB 695 KB

(2048 x 1536 pixels) 1602 KB 893 KB 445 KB

(1600 x 1200 pixels) 1002 KB 558 KB 278 KB

(640 x 480 pixels) 249 KB 150 KB 84 KB

(1600 x 1200 pixels) 558 KB

Resolution Frame Rate File size

Standard (640 x 480 pixels) 1980 KB/sec.

990 KB/sec.

My Colors (320 x 240 pixels) 660 KB/sec.

330 KB/sec.

Fast Frame Rate (320 x 240 pixels) 1320 KB/sec.

Compact (160 x 120 pixels) 120 KB/sec.

19

A ppendix

EC181-CUGBook(Basic-Advanced).book Page 119 Friday, July 8, 2005 4:13 PM

1

SD Memory Card

Battery Pack NB-4L

Battery Charger CB-2LV/CB-2LVE

Compact Power Adapter CA-DC10 (Included with the separately sold AC Adapter Kit ACK-DC10)

Interface Compatible with SD memory card standards Dimensions 32.0 x 24.0 x 2.1 mm (1.3 x 0.9 x 0.1 in.) Weight Approx. 2 g (0.07 oz.)

Type Lithium-ion Rechargeable battery Nominal Voltage 3.7 V DC Typical Capacity 760 mAh Cycle Life Approx. 300 times Operating Temperatures

0 40 C (32 104 F)

Dimensions 35.4 x 40.3 x 5.9 mm (1.4 x 1.6 x 0.23 in.) Weight Approx. 17 g (0.6 oz.)

Rated Input 100 240 V AC (50/60 Hz) 10 VA (100 V) 14 VA (240 V) (CB-2LV) 0.1 A (100 V) 0.06 A (240 V) (CB-2LVE)

Rated Output 4.2 V DC, 0.65 A Charging Time Approx. 90 minutes Operating Temperatures

0 40 C (32 104 F)

Dimensions 53.0 x 86.0 x 19.5 mm (2.1 x 3.4 x 0.77 in.) Weight Approx. 60 g (2.1 oz.) (CB-2LV)

Approx. 55 g (1.9 oz.) (CB-2LVE) (excluding power cable)

Rated Input 100 240 V AC (50/ 60 Hz) 16 VA (100 V) 26 VA (240 V)

Rated Output 4.3 V DC, 1.5 A Operating Temperatures

0 40 C (32 104 F)

Dimensions 42.6 x 104.4 x 31.4 mm (1.7 x 4.1 x 1.2 in.) Weight Approx. 180 g (6.3 oz.)

120

EC181-CUGBook(Basic-Advanced).book Page 120 Friday, July 8, 2005 4:13 PM

INDEX

A AC Adapter Kit ACK-DC10 .. 109 AE Lock ................................. 47 AF Frame......................... 45, 46 AF Lock.................................. 46 AF-assist Beam...................... 28 AiAF ....................................... 28 Auto Play (Slide Show) .......... 78 Auto Rotate Function ............. 64 AV Cable................................ 89

B Battery

Battery Capacity .............. 116 Charging ............ 106, Basic 1 Handling........................... 105 Installing..................... Basic 2

C Clock Display ......................... 16 Compression.......................... 33 Continuous Shooting ............. 37 Create Folder ......................... 65 Custom White Balance .......... 54

D Date/Time

Setting........................ Basic 4 Using the Clock.................. 16 World Clock ....................... 24

Digital Macro.......................... 35 DIGITAL Terminal .. 12, Basic 19 Digital Zoom........................... 36 Direct Transfer ............. Basic 22 Downloading Images to a Computer .................. Basic 16 DPOF Print Order

Print Style .......................... 85 Selecting Images ............... 83

DPOF Transfer Order ............ 87

E Erasing

All Images .......................... 82 Single Images .... 14, Basic 11

Exposure ................................ 50 Exposure Shift ........................ 43

F FE Lock .................................. 48 File Number............................ 66 Flash......................... 14, Basic 9 Focus...................................... 45 Focus Lock ............................. 46 Frame Rate ............................ 34 FUNC. Menu .......................... 26 FUNC./SET button ................. 14

G Grid Line................................. 28

H HF-DC1 ................................ 110 Histogram............................... 21

I Image Data Sizes (Estimated) 118 Index Playback ....................... 70 Indicator.................................. 22 Infinity ..................... 14, Basic 10 Interface Cable ....... Basic 14, 18 ISO Speed.............................. 63

J JUMP (Image Search)............ 71

21

EC181-CUGBook(Basic-Advanced).book Page 121 Friday, July 8, 2005 4:13 PM

1

L Language........................ Basic 4 LCD Monitor

Information Displayed......... 18 Night Display ...................... 17 Playback Information.......... 19 Quick-bright LCD................ 17 Shooting Information .......... 18 Using the LDC Monitor ....... 15

M Macro...................... 14, Basic 10 Magnifying .............................. 69 Memory Card

Estimated Capacities........ 117 Formatting .................. 23, 108 Handling ........................... 107 Inserting...................... Basic 2

Menu FUNC. Menu ................ 26, 28 Menu List............................ 28 Menus and Settings............ 26 My Camera Menu............... 31 Play Menu .......................... 29 Rec. Menu .......................... 28 Set up Menu ....................... 29

MENU button.......................... 14 Messages ............................. 102 Metering Modes...................... 49 Mode Switch ......... 14, Basic 5, 6 Movie

Editing ................................ 73 Playback............................. 72 Shooting ............................. 41

Mute Mode................ 29, Basic 5 My Camera Menu................... 31 My Camera Settings ............... 90 My Colors ............................... 57

P Photo Effect ........................... 56 Playback ...................... Basic 11 Postcard Date Imprint Mode .. 38 Power Button ........... 14, Basic 5 Power Saving................... 22, 30 Print/Share Button.. 14, Basic 14 Printing......................... Basic 14 Protect.................................... 82

R Red-Eye Reduction.. 12, Basic 9 Reset All................................. 31 Resolution ........................ 32, 34 Rotate .................................... 75

122

EC181-CUGBook(Basic-Advanced).book Page 122 Friday, July 8, 2005 4:13 PM

S Self-Timer .............................. 39 Set up Menu .......................... 29 Shooting Mode

Auto ........................... Basic 7 Digital Macro...................... 35 Manual ....................... Basic 7 Movie ................... 41, Basic 8 Scene Mode............... Basic 7

Beach..................... Basic 8 Fireworks ............... Basic 8 Foliage................... Basic 7 Indoor..................... Basic 7 Kids&Pets .............. Basic 7 Snow...................... Basic 7 Underwater ............ Basic 8

Selecting .................... Basic 6 Stitch Assist ....................... 43

Shutter Button........................ 14 Fully ........................... Basic 6 Halfway ...................... Basic 5

Shutter Speed........................ 51 Slide Show............................. 78

Repeat Settings ................. 81 Selecting ............................ 80 Transition Effects ............... 79

Smooth Continuous Shooting 37 Sound Memo ......................... 76 Spot AE Point Frame ............. 49 Spot Frame ............................ 18 System Requirements.. Basic 17

T Telephoto....................... Basic 9 Time Zone........................ 24, 30 Transition Effects

Playback ............................ 76 Slide Show......................... 79

V Video Output System ............. 89

W White Balance ........................ 53 Wide Angle ..................... Basic 9 Wrist Strap.............................. 13

Z Zoom .............................. Basic 9

23

EC181-CUGBook(Basic-Advanced).book Page 123 Friday, July 8, 2005 4:13 PM

1

MEMO

124

EC181-CUGBook(Basic-Advanced).book Page 124 Friday, July 8, 2005 4:13 PM

MEMO

25

EC181-CUGBook(Basic-Advanced).book Page 125 Friday, July 8, 2005 4:13 PM

1

MEMO

126

EC181-CUGBook(Basic-Advanced).book Page 126 Friday, July 8, 2005 4:13 PM

Trademark Acknowledgments Canon, PowerShot, PIXMA and SELPHY are trademarks of Canon Inc. Macintosh, Mac OS and QuickTime are trademarks of Apple

Computer Inc., registered in the United States and/or other countries. Microsoft and Windows are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

SD is a trademark. Other names and products not mentioned above may be registered

trademarks or trademarks of their respective companies.

Copyright 2005 Canon Inc. All rights reserved.

Disclaimer While every effort has been made to ensure that the

information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions.

Canon reserves the right to change the specifications of the hardware and software described herein at anytime without prior notice.

No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.

Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, SD memory cards (SD cards), personal computers, peripheral devices, or use of non-Canon SD cards.

27

EC181-CUGBook(Basic-Advanced).book Page 127 Friday, July 8, 2005 4:13 PM

1

Canadian Radio Interference Regulations This Class B digital apparatus complies with Canadian ICES-003. Rglementation canadienne sur les interfrences radio Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

FCC Notice (Digital Camera, Model PC1158)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516) 328-5600

128

EC181-CUGBook(Basic-Advanced).book Page 128 Friday, July 8, 2005 4:13 PM

Functions Available in Each Shooting Mode

The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting.

Function Page

Resolution

Large * * * * * *

p.32 p.34

Medium 1 Medium 2 Small Postcard Movie (1)

Compression Super Fine

p.33Fine * * * * * * Normal

Frame Rate (2) p.34

Flash(3)

Auto

Basic p.9

Auto with Red-Eye Reduction

* * *

On with Red-Eye Reduction

On Off * (4) * Slow Synchro

Macro Mode (5) Basic p.10Infinity Mode (5)

AF Lock p.46 AE Lock p.47 FE Lock p.48

Shooting Method

Single * * * * * * * Continuous Shooting p.37 10-sec. Self-Timer

p.392-sec. Self-Timer Custom Timer

Date Stamp p.38 Autofocus Modes (6) p.45 AF-assist Beam (7) p.28

EC181-CUGBook(Basic-Advanced).book Page 129 Friday, July 8, 2005 4:13 PM

129

*Default setting Setting available Setting can only be selected for the first image. (Shaded Area):Setting is retained even when the camera power is shut off.

With the exception of the [Time Zone], [Date/Time], [Language] and [Video System] settings, all the other menu settings and changes made with the camera buttons can be reset to the default values in a single operation (p. 31). (1)(2) The resolutions and frame rates for the (Movie) mode are as follows.

(3) The default flash setting is Auto with Red-Eye Reduction in the modes, Auto in the modes, and Off in the modes. - The flash cannot be set in mode. - When the flash fires in mode, the camera will automatically use Slow Synchro

mode. (4) The flash is set by default not to fire in the and modes. (5) You cannot switch between the Macro/Infinity modes when the camera is in the

modes. (6) AF cannot be selected in the modes. (7) The AF-assist Beam cannot be set in mode. (8) Can even be set during shooting (Standard only). (9) Exposure compensation not available in or modes. (10) Automatically set by the camera. (11) The Photo Effect cannot be set in the mode.

Digital Zoom On (8)

p.36 Off * * * *

Metering Method

Evaluative (10) * * * (10) (10)

p.49Center-Weighted Average Spot

Exposure Comp

Manualsnet FAQs

If you want to find out how the Digital Canon works, you can view and download the Canon Digital IXUS 55 Advanced User Guide on the Manualsnet website.

Yes, we have the Advanced User Guide for Canon Digital as well as other Canon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Advanced User Guide should include all the details that are needed to use a Canon Digital. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Canon Digital IXUS 55 Advanced User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Canon Digital IXUS 55 Advanced User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Canon Digital IXUS 55 Advanced User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Canon Digital IXUS 55 Advanced User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Canon Digital IXUS 55 Advanced User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.