Candy CB 13L8B-80 User Manual PDF

Pages 40
Year 2003
Language(s)
English en
1 of 40
1 of 40

Summary of Content for Candy CB 13L8B-80 User Manual PDF

Page 3

A different use of this appliance from household environment or from typical housekeeping functions, as commercial use by expert or trained users, is excluded even in the above applications... If the appliance is used in a manner inconsistent with this it may reduce the life of the appliance and may void the manufacturers warranty... Any damage to the appliance or other damage or loss arising through use that is not consistent with domestic or household use (even if located in a domestic or household environment) shall not be accepted by the manufacturer to the fullest extent permitted by law... l This appliance can be used by

Page 4

normal kitchen utensils... Objects that have been contamined by petrol, paint, traces of steel or iron, corrosive chemicals, acids or alkalis must not be washed in the dishwasher...

Page 5

stops working properly, switch it off, turn off the water supply and do not tamper with it... Repair work should only be carried out by an approved service agent and only genuine spare parts should be fitted... Any failure to follow the above advice may have serious consequences for the safety of the appliance...

Page 6

l If the dishwasher is connected to new pipes or to pipes which have not been inuse for a long time run water through for a few minutes before connecting the inlet hose... In this way no deposits of sand or rust will clog up the water inflow filter...

Page 7

How it works A sump located on the base of the appliance collects any possible water leakage and operates a sensor which activates a valve placed under the water tap and blocks any water, even with the tap fully opened... If box "A" containing the electrical parts is damaged, remove the plug from the socket immediately... To ensure perfect operation of the safety system, the hose with box "A" should be connected to the tap as shown in the figure... The water supply hose should not be cut, as it contains live parts... If the hose is not long enough for correct connection, it must be replaced with a longer one... The hose can be obtained from the Technical Assistance Centre...

Page 8

(fig... 6X)... If necessary the outlet hose can be extended up to 2,5 m, provided that it is kept at a maximum height of 85 cm above floor level... The extension pipe is available from the After Sales Service Centre...

Page 9

specifically designed for dishwasher... Other types of salt contain small quantities of insoluble particles which over a long period of time may affect and deteriorate the softener performance...

Page 10

l If 29 cm to 32... 5 cm plates are regularly used, load them onto the lower basket after the upper basket has been placed in its upper position, as detailed below (according to the model):

Page 11

allow you to load dinner plates and soup plates... Plates should be loaded vertically with the underside of the plate towards the back of the dishwasher with a space between each plate to allow water to pass freely...

Page 12

TEST LABORATORIES Please ask information required for comparison testing and measuring noise levels, according to EN normative, to the following address: [email protected] it In the request, please specify model name and number of the dishwasher (see rating plate)...

Page 13

Since not all detergents are the same the instructions on the boxes of detergent can vary... We should just like to remind users that too little detergent does not clean the dishes properly whilst too much detergent will not produce better results and is also a waste...

Page 14

Please note that using the "TABS" combined detergents, the rinse aid and salt indicator lights (only used on selected models) are superfluous, so you must ignore the lights... If washing and/or drying problems occur, we recommend you return to use traditional separate products (salt, detergent and rinse agent)... This will ensure that the water softener in the dishwasher operates correctly... In this case, we recommends that you: l refill both the salt and rinse aid container; l run one normal washing cycle without a

Page 15

The regulator (D) is placed under the lid and can be turned using a coin... The recommended position is 4... The limestone content of the water considerably affects the formation of limescale and the drying performance... It is therefore important to regulate the quantity of rinse aid to achieve good washing results... If, after the wash, streaks occur on the dishes, decrease the amount by one position... If whitish spots occur, increase the amount by one position...

Page 16

WARNING After cleaning the filters, make sure that they are correctly reassembled and that the gauze filter is properly positioned at the bottom of the dishwasher... Make sure that the filter is screwed back, clockwise, into the gauze, as poor seating of the filter unit could have an adverse effect on the efficiency of the appliance...

Page 17

l It should be remembered that not all dishes are suitable for washing in a dishwasher... We advise against using the dishwasher to wash items in thermoplastic, cutlery with wooden or plastic handles, saucepans with wooden handles, items in aluminum, crystal leaded glass unless otherwise stated...

Page 18

1) to remove the upper rotor arm, turn it until it lines up with the stop marked by the arrow (fig... 1b)... Push it upwards (fig... 1) and, keeping it pushed in, unscrew it in a clockwise direction (to reassemble it repeat the same operation, but turn it anticlockwise)... The lower rotor arm can be removed simply by pulling it upwards (fig... 2);

Page 19

7... If the machine is left in places where the temperature is below 0C any water left inside the pipes may freeze... Wait until the temperature rises above zero and then wait for about 24 hours before...

Page 21

Progr... buttons will be active, and all the programme indicator lights will come on for 3 sec... After this only indicator light P3 will stay on, and all the buttons will still be active...

Page 22

The dishwasher is equipped with a dirt sensor, capable of analysing water murkiness during all "AUTOMATIC" programme phases (see programme legend)... Thanks to this device, the wash cycle parameters are automatically adapted to the real quantity of dirt on dishes... This is because water murkiness is linked to the quantity of dirt on dishes... Thus, excellent washing results are guaranteed while optimising water and energy consumption...

Page 23

The option buttons provide you with further wash options, allowing you to customise the wash programmes (see the table in chapter 17 for a list of programmes on which each option can be enabled)... Options are enabled (or disabled) before starting the programme, using the appropriate buttons... The relevant indicator lights will appear (or disappear) on the display... The option button should be enabled after you have chosen the wash programme...

Page 24

If a 9 hour delay is set, countdown will be displayed by the 6h indicator light after 3 hours and the 3h indicator light after 6 hours... At the end of the last 3 hours (at the end of countdown) the 3h indicator light will stop flashing and remain on to indicate the washing phase and the programme will start automatically... If countdown has not ended, whereby the programme has not yet started, it is possible to change or cancel the delayed start and select another programme or to select/deselect the option button, proceeding as follows: l Hold the "Start/Reset" button down for at

Page 25

1... The "6h" indicator light on the "Start Delay" function is off by default... 2... When you press the "Start Delay" button, the "6h" indicator light will come on and an audio signal will sound...

Page 26

down the "START DELAY" button again... For more information, refer to the "Enrollment App - Quick Guide" that comes with your machine, also accessible at the link : go... candy-group... com/bm-dw

Page 27

If you turn the machine off and turn it back on with the On/Off button while REMOTE CONTROL is enabled and a cycle is under way (or if the power supply is interrupted), the cycle will resume from the point at which it was interrupted... "REMOTE CONTROL" will be disabled and indicator lights P3 and P4 will flash...

Page 28

P3 Eco Programme for normally soiled tableware (the most efficient in terms of its combined energy and water consumption for that type of tableware)... Programme standardised to EN 50242...

Page 29

*Values are measured in a laboratory according to European Standard EN 50242 (consumption may vary according to conditions of usage)...

Page 30

18... WATER SOFTENER UNIT Depending on the source of the supply, water contains varying amounts of limestone and minerals which are deposited on the dishes leaving whitish stains and marks... The higher the level of these minerals present in the water, the harder the water is... The dishwasher is fitted with a water softener unit which, through the use of special regenerating salt, supplies softened water for washing the dishes... The degree of hardness of your water can be obtained from your water supply company...

Page 31

If malfunctions or faults occur when a programme is running, the indicator light that corresponds to the selected cycle will blink rapidly, and an intermittent audio signal will sound... In this case, turn the dishwasher off by pressing the "ON/OFF" button... After checking to make sure the water supply is open, that the drain pipe is not bent and that the siphon or filters are not clogged, set the selected program again... If the fault persists, contact the Technical Assistance Centre...

Page 32

WARNING To ensure the correct operation of the overflow safety device, we recommend not moving or tilting the dishwasher during operation... Should it be necessary to tilt or move the dishwasher, please ensure that the washing cycle is complete and that no water remains inside the appliance...

Page 33

Mains water is too hard Check salt and rinse aid level and regulate... Should the fault persist, contact the Technical Assistance Centre

Page 34

N... B... : Should any of the above situations result in a bad wash performance or insufficient rinsing, remove dirt deposits from the dishes by hand since the final drying cycle hardens the dirt, making it difficult to remove with a subsequent wash... If the malfunction continues, contact the Technical Assistance Centre, quoting the model of the dishwasher... This is found on the plate on the upper section of the inside of the dishwasher door, or on the warranty... This information will make it possible to take quicker, more effective action...

Page 35

WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used)... It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials... Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is

Page 36

With this the Candy Hoover Group Srl, declares that this appliance marked with complies with the essential requirements of the Directive 2014/53/EU... To receive a copy of the declaration of conformity, please contact the manufacturer at: www... candy-group...

Manualsnet FAQs

If you want to find out how the CB 13L8B-80 Candy works, you can view and download the Candy CB 13L8B-80 User Manual on the Manualsnet website.

Yes, we have the User Manual for Candy CB 13L8B-80 as well as other Candy manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Candy CB 13L8B-80. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Candy CB 13L8B-80 User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Candy CB 13L8B-80 User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Candy CB 13L8B-80 User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Candy CB 13L8B-80 User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Candy CB 13L8B-80 User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.