Campbell Scientific CPEC200 System Quick Deploy Guide PDF

1 of 16
1 of 16

Summary of Content for Campbell Scientific CPEC200 System Quick Deploy Guide PDF

CPEC200 Closed Path Eddy Covariance System Quick Deploy Guide

February 2016

1. Setup tripod and mount enclosures.

EC100 Enclosure CPEC200 Enclosure

EC100 Enclosure

Pump Module

CPEC200 Enclosure

Pump Module Optional Scrub Module

Leg Mount

Mixed Mast and Leg Mount

2. Ground tripod and enclosures.

Ground Lug Grounding Rod

3. Setup tripod or mast with CM20X Crossarm.

Crossarm-To-Pole Bracket

CM20X Crossarm

4. Mount the EC155 bypass tube.

EC155 bypass tube

Mounting clip

5. Mount gas analyzer and sonic anemometer.

EC155 Gas Analyzer

CM20X Crossarm

EC155 Boom Adapter

Mounting Platform

CSAT3A Sonic Anemometer Head

Leveling Bubble

6. Connect EC155 and CSAT3A to EC100 Electronics.

EC155 Analyzer Cable

EC155 Sample Cell Cable

CSAT3A Cable

7. Connect system plumbing.

Zero Air Tubing

Analyzer Tubing

Pump Tubing

Pump Module Cable

CO2 Span Gas Tubing

8. Connect system wiring and insert compact flash (CF) card.

EC100 Power and SDM Cables

System Power Cable (ensure +12 Vdc power supply is off)

Insert CF Card

Power Cable to EC100

EC100 SDM Cable

Power Cable to +12Vdc Power Supply (off)

SDM Cable to EC100 EC100 Power Cable

9. Turn on the +12 Vdc power supply and use the datalogger keyboard display to set settings and initiate zero/span checks.

9.1 Press Esc to activate the display. Press Enter to display the System Control Menu.

9.2 Select Configure System.

9.3 Select SONIC_AZIMU.

9.4 Enter the CSAT3A sonic head azimuth.

9.5 If the CPEC does not have a valve module,

skip to 9.10. Otherwise, select Zero/Span Config.

9.6 Select CO2_SPAN_PPM.

9.7 Set CO2_SPAN_PPM to match the CO2 concentration of the CO2 span gas tank.

9.8 Select CHECK_ZERO, SET_ZERO,

CHECK_SPAN1, SET_SPAN1 in sequence. Leave CHECK_SPAN2, CHECK_SPAN3, and CHECK_SPAN4 as FALSE unless the 6-valve module is being used.

9.9 For each value selected on the previous

screen, change the setting from False to True for auto zero/span.

9.10 Press ESC to exit.

Manualsnet FAQs

If you want to find out how the CPEC200 Campbell Scientific works, you can view and download the Campbell Scientific CPEC200 System Quick Deploy Guide on the Manualsnet website.

Yes, we have the Quick Deploy Guide for Campbell Scientific CPEC200 as well as other Campbell Scientific manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Deploy Guide should include all the details that are needed to use a Campbell Scientific CPEC200. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Campbell Scientific CPEC200 System Quick Deploy Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Campbell Scientific CPEC200 System Quick Deploy Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Campbell Scientific CPEC200 System Quick Deploy Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Campbell Scientific CPEC200 System Quick Deploy Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Campbell Scientific CPEC200 System Quick Deploy Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.