Campbell Scientific PN 32477 Supply Kit Info Sheet PDF

1 of 1
1 of 1

Summary of Content for Campbell Scientific PN 32477 Supply Kit Info Sheet PDF

Enclosure supply kit (pn 7363 or pn 32477) The contents of this bag are for use with Campbell Scientific field enclosures. Please note that some of the enclosed items are intended for future use.

1. Use the #6 screws and plastic grommets to mount additional peripherals to the enclosure backplate. Data loggers, power supplies, and most peripherals are either attached to the backplate prior to shipment from the factory or are supplied with additional screws and grommets. To insert the grommet, push the points of the flanges into the center of any square hole. To remove a grommet without damage, remove the enclosure backplate and use pliers to pinch the grommet flanges together.

2. If desired, insert the PVC coupling to reduce the conduit diameter to 1.27 cm (0.5 in). Route the sensor cable through the enclosure conduit to the data logger or peripheral terminal strips.

3. Use the cable-tie tabs and 8-in cable ties to strain relief the cables to the side of the enclosure as shown.

NOTE: The adhesive of the cable tie tab may not stick during extremely cold temperatures or extremely high humidity. In these situations, fasten the cable- tie tab to the backplate using a #6 screw and grommet.

4. Anchor the sensor wires to the data logger strain-relief flanges with the 4-in cable ties.

5. Remove the backing tape from the humidity indicator card and attach to the side of the enclosure as shown.

6. Seal the gap between the sensor cables and the enclosure conduit with sealing putty.

7. Place two desiccant packs inside the enclosure. Reseal the remaining desiccant inside the plastic bag. Store the desiccant in a dry area and use it to replace the desiccant in the enclosure during a site visit or when the 40% ring on the humidity indicator turns pink.

CAUTION: Campbell Scientific recommends purchasing new desiccant rather than attempting to reuse desiccant by drying it in an oven.

The enclosure supply kit includes the following:

7363 Qty.

32477 Qty. PN Description

8 4 505 #6-32 x .375 screws

8 4 6044 grommets

4 2 2376 3-cm cable-tie tabs

6 6 2207 4-in cable ties

6 2 4005 8-in cable ties

1 1 28878 humidity indicator card

2 2 6596 4-oz container of sealing putty

4 2 4905 4-unit desiccant packs

1 1 6290 Phillips screwdriver

1 1 25745 PVC coupling

1999

Manualsnet FAQs

If you want to find out how the PN 32477 Campbell Scientific works, you can view and download the Campbell Scientific PN 32477 Supply Kit Info Sheet on the Manualsnet website.

Yes, we have the Info Sheet for Campbell Scientific PN 32477 as well as other Campbell Scientific manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Info Sheet should include all the details that are needed to use a Campbell Scientific PN 32477. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Campbell Scientific PN 32477 Supply Kit Info Sheet is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Campbell Scientific PN 32477 Supply Kit Info Sheet consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Campbell Scientific PN 32477 Supply Kit Info Sheet free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Campbell Scientific PN 32477 Supply Kit Info Sheet, simply download the document to your computer. Once downloaded, open the PDF file and print the Campbell Scientific PN 32477 Supply Kit Info Sheet as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.