Contents

Bryant KSACN0401AAA Owner’s Manual PDF

1 of 26
1 of 26

Summary of Content for Bryant KSACN0401AAA Owner’s Manual PDF

Wired Remote Controller 7 Day Programmable Thermostat Ductless Systems KSACN0401AAA KSACN0501AAA

OWNER'S MANUAL

2

TABLE OF CONTENTS PAGE

SAFETY CONSIDERATIONS 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WIRED CONTROLLER FEATURES AND FUNCTIONS 5. . . . . . . . . .

WIRED CONTROLLER DISPLAY 6. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PREPARATORY OPERATION 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OPERATION 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TIMER FUNCTIONS 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WEEKLY TIMER 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

FAULT ALARM HANDLING 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TECHNICAL INDICATION AND REQUIREMENT 25. . . . . . . . . . . . .

NOTE: To ensure the correct service of the wired controller, read this manual carefully before using the unit. Keep this manual after reading for future reference.

3

SAFETY CONSIDERATIONS Installing, starting up, and servicing airconditioning equipment can be hazardous due to system pressures, electrical components, and equipment location (roofs, elevated structures, etc.). Only trained, qualified installers and service mechanics should install, startup, and service this equipment. Untrained personnel can perform basic maintenance functions such as cleaning coils. When working on the equipment, observe precautions in the literature and on tags, stickers, and labels attached to the equipment. Follow all safety codes. Wear safety glasses and work gloves. Keep a quenching cloth and fire extinguisher nearby when brazing. Use care in handling, rigging, and setting bulky equipment. Read these instructions thoroughly and follow all warnings or cautions included in the literature and attached to the unit. Consult the local building codes and National Electrical Code (NEC) for special requirements. Recognize safety information.

This is the safetyalert symbol. When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words: DANGER, WARNING, and CAUTION. These words are used with the safetyalert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.

4

CAUTION! ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death.

Before beginning any modification or installation of this kit, ensure the main electrical disconnect is in the OFF position. Ensure power is disconnected to the fan coil unit. On some systems both the fan coil and the outdoor unit may be on the same disconnect. Tag the disconnect switch with a suitable warning label. There may be more than one to disconnect.

EQUIPMENT DAMAGE HAZARD

Failure to follow this caution may result in equipment damage or improper operation. Do not install the wired controller in an area subjected to excessive steam, oil or sulfide gas. Doing so may cause the controller to deform and/or fail.

CAUTION!

5

WIRED CONTROLLER FEATURES AND FUNCTIONS Features:

LCD display Malfunction code display displays the error code (helpful for servicing)

4way wire layout design

Room temperature display Weekly schedule

Functions: Mode: choose AutoCoolDryHeatFan

Fan speed: AutoLowMedHigh Swing (on some models)

Timer ON/OFF

Temp setting Weekly Schedule

FOLLOW ME Child Lock

LCD Display Clock

6

WIRED CONTROLLER DISPLAY 1 2 3 4 5 7

9

10

11

12

13

4151

6 8

Fig. 1 - Wired Controller Display 1. Operation mode indicator 2. Fan speed indicator 3. Leftright swing indicator 4. Updown swing indicator 5. Not Available 6. Not Available 7. FOLLOW ME function indicator 8. Turbo/Auxiliary Heat function indicator 9. C / F indicator

10. Temperature display 11. Lock indicator 12. Room temperature indicator 13. Clock display 14. On/Off timer 15. Timer display

7

WIRED CONTROLLER DISPLAY

1

Swing Timer

Mode

Fan speed

(Lock)

- + 2

3

4

3

5

6

7

8

9

10

Copy/ FOLLOW ME

Fig. 2 - Wired Controller Buttons 1. Mode 2. Power 3. Adjust 4. Fan Speed 5. Swing 6. Timer 7. Day Off/Del 8. Copy/FOLLOW ME 9. Back/Turbo

10. Confirm

8

PREPARATORY OPERATION SET THE CURRENT DAY AND TIME

Press TIMER for 3 seconds or more. The timer displays flashes.

Timer

Fig. 3 - Timer Press + or to set the date. The selected date flashes.

- +

Fig. 4 - Day Date setting is complete and the time setting is ready after pressing TIMER or if nothing

is pressed in 10 seconds.

Timer

Fig. 5 - Timer

9

Press + or to set the current time. Press repeatedly to adjust the current time in 1 minute increments. Press and hold to adjust the current time.

ex.Monday AM 11:20

- +

Fig. 6 - Time The setting is complete after pressing TIMER or if no button is pressed for 10 seconds.

Timer

Fig. 7 - Timer

OPERATION To start/stop operation

Fig. 8 - Power Button

10

To set the operation mode Operation mode setting

Press MODE to set the operation mode.

Mode

Fig. 9 - Operation Mode Press + or to set the room temperature. Indoor Setting Temperature Range:

62~86F(17~30C)/62~88F (17~31C (depending on models)).

Lower Raise

- +

Fig. 10 - + or Press FAN SPEED to set the fan speed (see Fig. 11).

NOTE: This function is unavailable in the AUTO or DRY modes.

11

Fan speed

(Lock)

Fig. 11 - Fan Speed Press FOLLOW ME to select whether the room temperature is detected at the indoor unit

or at the wired controller.

Indoor Unit Copy/FOLLOW ME

Fig. 12 - FOLLOW ME NOTE: When the FOLLOW ME function indication appears, the room temperature is detected at the wired remote controller.

12

Press LOCK for 3 seconds to activate the CHILD LOCK feature and lock all buttons on the wired controller. Press again for 3 seconds to deactivate.

Fan speed

(Lock)

Fig. 13 - LOCK NOTE: When the child lock function is activated, the lock image appears.

Press SWING and TIMER simultaneously for 3 seconds to disable the keypad tone. Press the buttons again for 3 seconds to enable the keypad tone.

Swing Timer

Fig. 14 - Keypad Tone Setting NOTE: This function is only available for KSACN0501AAA (Ducted/Cassette Models).

13

Press BACK and COPY simultaneously for 3 seconds to alternate the temperature display between the F andC scale.

Back/Turbo Copy/ FOLLOW ME

Fig. 15 - F &C Temperature Selection Press TURBO to activate/deactivate the Turbo/Auxiliary Heat function. The turbo

function sets the unit to reach the users present temperature in the shortest amount of time possible.

When the user presses TURBO in the COOL mode, the unit sets to the highest fan speed setting to jumpstart the cooling process.

When the user presses TURBO in the HEAT mode, for units with AUX. HEAT, the AUX. HEAT activates and jumpstarts the heating process.

Back/Turbo

Fig. 16 - Turbo/Auxiliary Heat function (on some models)

14

Press SWING to start the UPDOWN SWING function. Press SWING again to stop.

Swing

Fig. 17 - Swing NOTE: Press SWING for 5 seconds to activate the LEFTRIGHT SWING function. This function is not available on the indoor units.

Use SWING to adjust the up and down airflow direction.

Swing

Fig. 18 - Swing Every time the user presses SWING, the louver swings six degrees.

Press and hold SWING for 2 seconds, it changes to the UPDOWN SWING mode. Press SWING again to stop.

15

TIMER FUNCTIONS Weekly Timer Use to set the operating times for each day of the week. On Timer Use to start the air conditioner operation. The timer operates and the

air conditioner operation starts after the time has passed. Off Timer Use to stop the air conditioner operation. The timer operates and the

air conditioner operation stops after the time has passed. On and Off Timer Use to start and stop the air conditioner operation. The timer

operates and the air conditioner operation starts and stops after the time has passed. To set the Daily ON, OFF and ON/OFF TIMER

1. Press TIMER to select the DAY ON or DAY OFF.

No display

Timer

Fig. 19 - Timer 2. Press CONFIRM and the clock display flashes.

Confirm

Fig. 20 - Confirm 3. Press + or to set the time. After the time is set, the timer starts or stops automatically.

ex.Off timer set at PM 6:00 - +

Fig. 21 - + or

16

4. Press CONFIRM again to complete the settings.

Confirm

Fig. 22 - Confirm To set the Daily ON, OFF and ON/OFF TIMER

1. Press TIMER to select the DAY ON or DAY OFF.

Timer

Fig. 23 - Timer 2. Press CONFIRM and the clock display flashes.

Confirm

Fig. 24 - Confirm 3. Press the button + or to set the ON TIMER and then press CONFIRM.

- +

Confirm

Fig. 25 - + or

17

4. Press + or to set the OFF TIMER.

- +

Fig. 26 - + or 5. Press CONFIRM to finish the setting.

Confirm

Fig. 27 - Confirm

18

WEEKLY TIMER 1. Press TIMER to select the week and press CONFIRM.

Timer Confirm

Fig. 28 - Weekly timer setting 2. Press + or to select the day of the week and then press CONFIRM.

- +

Confirm

Fig. 29 - Day of the week setting 3. Press + and to select the setting time. The setting time, mode, temperature and fan speed

appear on the LCD. Press CONFIRM to enter the setting time process.

- +

Confirm

Fig. 30 - ON timer setting for Timer setting 1 IMPORTANT: Up to 8 scheduled events can be set on one day. Various events can be scheduled in either MODE, TEMPERATURE and FAN speeds.

ex.Tuesday scheduled event

Fig. 31 - Tuesday scheduled events 1

19

4. Press + and to set the time then press CONFIRM.

- + Confirm

Fig. 32 - Time Setting 5. Press + and to set the operation mode then press CONFIRM.

- + Confirm

Fig. 33 - Operation Mode Setting 6. Press + and to set the room temperature then press CONFIRM.

- + Confirm

Fig. 34 - Room Temperature Setting NOTE: This setting is unavailable in the FAN or OFF modes.

7. Press + and to set the fan speed then press CONFIRM.

- + Confirm

Fig. 35 - Fan Speed Setting NOTE: This setting is unavailable in the AUTO, DRY or OFF modes. Different scheduled events can be set by repeating steps 3 through 7. Additional days, in a one week period, can be set by repeating steps 3 through 8.

20

NOTE: The weekly timer setting can be returned to the previous step by pressing BACK. The current setting is restored. The controller will not save the weekly timer settings if there is no operation within 30 seconds. Weekly Timer Operation

1. Press TIMER to select the week, and then the timer starts automatically.

Timer

To start

Fig. 36 - Weekly Timer Operation 2. Press POWER to cancel the timer mode. The timer mode can also be canceled by changing the

timer mode using TIMER.

Timer

To cancel

Fig. 37 - Power and Timer To set the DAY OFF (for a holiday)

1. After setting the weekly timer, press CONFIRM.

- +

Confirm

Fig. 38 - Confirm

21

2. Press + or to select the day of the week.

- +

Fig. 39 - + or 3. Press DAY OFF to create an off day.

ex.The DAY OFF is set for Wednesday

The mark is hidden

Day off/Del

Fig. 40 - DAY OFF 4. Set the DAY OFF for other days by repeating the steps 2 and 3. 5. Press BACK to revert to the weekly timer.

Back/Turbo

Fig. 41 - Back/Turbo To cancel, follow the same procedures used for setup. NOTE: The DAY OFF setting is cancelled automatically after the set day has passed. Copy the setting from one day to another day A scheduled event, made once, can be copied to another day of the week. The scheduled events of the selected day of the week will be copied. The effective use of the copy mode ensures the ease of reservation making.

22

1. In the weekly timer, press CONFIRM.

Confirm

Fig. 42 - Confirm 2. Press + or to select the day to copy from.

- +

Fig. 43 - + or 3. Press COPY, the letters CY appear on the LCD.

Copy/FOLLOW ME

Fig. 44 - COPY 4. Press + or to select the day to copy to.

- +

Fig. 45 - + or

23

5. Press COPY to confirm.

ex. Copy the setting of Monday to Wednesday

Copy/ FOLLOW ME

T

Fig. 46 - Copy 6. Other days can be copied by repeating steps 4 and 5. 7. Press CONFIRM to confirm the settings.

Confirm

Fig. 47 - Confirm 8. Press BACK to revert to the weekly timer.

Back/Turbo

Fig. 48 - Back/Turbo

24

Delete the scheduled events in one day 1. During the weekly timer setting, press CONFIRM.

Confirm

Fig. 49 - Confirm 2. Press + and to select the day of the week and then press CONFIRM.

- + Confirm

Fig. 50 - + and 3. Press + and to select the setting time want to delete. The setting time, mode, temperature and

fan speed appear on the LCD. The setting time, mode, temperature and fan speed can be deleted by pressing the DEL (day off).

ex. Delete scheduled event 1 for Saturday

Fig. 51 - + and

25

FAULT ALARM HANDLING If the system does not properly operate except in the aforementioned cases or the aforementioned malfunctions are evident, investigate the system according to the following procedures.

Table 1Fault Alarm

No. MALFUNCTION AND PROTECTION DEFINITION DISPLAY

DIGITAL TUBE

1 Communication error between wired controller and indoor unit F0

2 The faceplate is abnormal F1

Please check the indoor units error display and review the owners manual if other error codes appear.

TECHNICAL INDICATION AND REQUIREMENT EMC and EMI comply with the CE certification requirements.

26

Copyright 2018 CAC / BDP S 7310 W. Morris St. S Indianapolis, IN 46231 Edition Date: 01/18

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.Replaces: OM-KSACN04(5)01-02

Catalog No: OM-KSACN04(5)01-03

Manualsnet FAQs

If you want to find out how the KSACN0401AAA Bryant works, you can view and download the Bryant KSACN0401AAA Owner’s Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Bryant KSACN0401AAA as well as other Bryant manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Bryant KSACN0401AAA. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bryant KSACN0401AAA Owner’s Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bryant KSACN0401AAA Owner’s Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bryant KSACN0401AAA Owner’s Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bryant KSACN0401AAA Owner’s Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Bryant KSACN0401AAA Owner’s Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.