Contents

Brother FAX-1860C Printer Driver User's Guide PDF

1 of 155
1 of 155

Summary of Content for Brother FAX-1860C Printer Driver User's Guide PDF

SOFTWARE USERS GUIDE

For DCP users; This documentation is for both MFC and DCP models. Where it says MFC in this users guide, please read MFC as DCP.

Version A

i

Table of Contents

Section I Windows

1 Printing Using the Brother printer driver..................................................................................................................2 Features ....................................................................................................................................................2 Choosing the right type of paper................................................................................................................3 Simultaneous printing, scanning and faxing ..............................................................................................3 Clearing data from the memory .................................................................................................................3 Checking the print quality ..........................................................................................................................3 Status Monitor............................................................................................................................................4

Monitoring the machines status ..........................................................................................................4 Turning off the status monitor..............................................................................................................5

Printer driver settings.................................................................................................................................5 Accessing the printer driver settings..........................................................................................................5 Basic tab ....................................................................................................................................................6

Media Type..........................................................................................................................................7 Quality .................................................................................................................................................7 Enhanced Print Settings ......................................................................................................................8 Improve Pattern Printing (Windows 2000/XP only) .........................................................................10 Paper Size .........................................................................................................................................10 Page Layout ......................................................................................................................................11 Orientation .........................................................................................................................................11 Copies ...............................................................................................................................................12 Paper Source (MFC-5860CN only) ...................................................................................................12

Advanced tab...........................................................................................................................................13 Colour ................................................................................................................................................14 Scaling...............................................................................................................................................16 Watermark .........................................................................................................................................17 Device Options ..................................................................................................................................19

Support tab ..............................................................................................................................................21

2 Scanning Scanning a document using the TWAIN driver........................................................................................22

TWAIN compliant...............................................................................................................................22 Accessing the Scanner......................................................................................................................23 Scanning a document into the PC .....................................................................................................24 Settings in the Scanner Setup dialog box..........................................................................................25

Scanning a document using the WIA driver (Windows XP only) ...........................................................29 WIA compliant ...................................................................................................................................29 Accessing the scanner ......................................................................................................................29 Scanning a document into the PC .....................................................................................................30

ii

Using the Scan key (For USB cable users) .............................................................................................34 Scan to E-mail ...................................................................................................................................34 Scan to Image ...................................................................................................................................35 Scan to OCR .....................................................................................................................................35 Scan to File........................................................................................................................................36 Scan to Card (Not available for MFC-240C and MFC-3360C) ..........................................................36

Using ScanSoft PaperPort SE with OCR ............................................................................................40 Viewing items ....................................................................................................................................41 Organizing your items in folders ........................................................................................................42 Quick links to other applications ........................................................................................................42 ScanSoft PaperPort SE with OCR lets you convert image text into text you can edit...................42 You can import items from other applications ...................................................................................43 You can export items into other formats............................................................................................43 Uninstalling ScanSoft PaperPort SE with OCR.............................................................................43

3 ControlCenter3 Using ControlCenter3 ..............................................................................................................................44

Switching the user interface ..............................................................................................................46 Turning the AutoLoad feature off.......................................................................................................46 SCAN.................................................................................................................................................47 CUSTOM SCAN................................................................................................................................47 PHOTOCAPTURE (USB only) (Not available for MFC-3360C) ........................................................47 COPY ................................................................................................................................................48 PC-FAX (MFC models only) ..............................................................................................................48 DEVICE SETTING.............................................................................................................................48

SCAN.......................................................................................................................................................49 Image (example: Microsoft Paint)....................................................................................................49 OCR (Word Processing program) .....................................................................................................51 E-mail ................................................................................................................................................52 Supported file types...........................................................................................................................52 File.....................................................................................................................................................53

CUSTOM SCAN ......................................................................................................................................54 Customizing a user-defined button....................................................................................................55

PHOTOCAPTURE (USB only) (Not available for MFC-3360C) ..............................................................59 Open PCC Folder (PCC: PhotoCapture Center) ...........................................................................59 Copy From PCC ................................................................................................................................59 Copy To Application ..........................................................................................................................60

COPY ......................................................................................................................................................61 PC-FAX (MFC models only) ....................................................................................................................63

Send ..................................................................................................................................................63 Receive/View Received (Not available for MFC-240C and MFC-3360C) .........................................64 Address Book ....................................................................................................................................65 Setup .................................................................................................................................................65

DEVICE SETTING...................................................................................................................................66 Remote Setup (Not available for DCP models and MFC-240C) .......................................................66 Quick-Dial (Not available for DCP models and MFC-240C)..............................................................67 Ink Level ............................................................................................................................................67 Users Guide......................................................................................................................................67

iii

4 Network Scanning (For models with built-in network support) Before using Network Scanning ..............................................................................................................68

Network license .................................................................................................................................68 Configuring Network Scanning ..........................................................................................................69

Using the Scan key..................................................................................................................................71 Scan to E-mail (PC)...........................................................................................................................71 Scan to Image ...................................................................................................................................72 Scan to OCR .....................................................................................................................................72 Scan to File........................................................................................................................................73

5 Remote Setup (Not available for DCP models and MFC-240C) Remote Setup..........................................................................................................................................74

6 Brother PC-FAX Software (MFC models only) PC-FAX sending ......................................................................................................................................76

Setting up user information................................................................................................................77 Sending setup....................................................................................................................................78 Setting up a cover page.....................................................................................................................79 Entering cover page information........................................................................................................79 Address Book ....................................................................................................................................80

Speed Dial setup .....................................................................................................................................81 Brother Address Book .......................................................................................................................82 Setting up a member in the Address Book ........................................................................................82 Setting up a group for broadcasting ..................................................................................................83 Editing member information...............................................................................................................83 Deleting a member or group..............................................................................................................83 Exporting the Address Book ..............................................................................................................84 Importing to the Address Book ..........................................................................................................85 Sending a file as a PC-FAX using the Facsimile style user interface................................................86 Sending a file as a PC-FAX using the Simple style user interface ....................................................87

PC-FAX receiving (Not available for MFC-240C and MFC-3360C).........................................................89 Enabling the PC-FAX Receiving software on your machine .............................................................90 Running the PC-FAX Receiving software on your PC.......................................................................91 Setting up your PC ............................................................................................................................91 Configuring the Network PC-FAX Receiving Settings .......................................................................92 Viewing new PC-FAX messages.......................................................................................................93

7 PhotoCapture Center (Not available for MFC-3360C) For USB cable users................................................................................................................................94 For Network users (For models with built-in network support) ................................................................96

iv

Section II Apple Macintosh

8 Printing and Faxing Setting up your USB-equipped Apple Macintosh ................................................................................98

Simultaneous printing, scanning and faxing ......................................................................................98 Clearing data from the memory .........................................................................................................98 Checking the print quality ..................................................................................................................98 Status Monitor ...................................................................................................................................99

Using the Brother Ink driver ...................................................................................................................100 Choosing page setup options ..........................................................................................................100 Choosing printing options ................................................................................................................101 Media Type......................................................................................................................................101 Quality .............................................................................................................................................102 Paper Feed (MFC-5860CN only).....................................................................................................103

Sending a fax (MFC models only) .........................................................................................................104

9 Scanning Scanning from a Macintosh .................................................................................................................107

Accessing the scanner ....................................................................................................................107 Scanning an image into your Macintosh .......................................................................................108 Pre-Scanning an image ...................................................................................................................108 Settings in the Scanner window ......................................................................................................109

Using the Scan key (For USB cable users) ...........................................................................................113 Scan to E-mail .................................................................................................................................113 Scan to Image .................................................................................................................................114 Scan to OCR ...................................................................................................................................114 Scan to File......................................................................................................................................115 Scan to Card (Not available for MFC-240C and MFC-3360C) ........................................................115

Using Presto! PageManager .............................................................................................................119 Features ..........................................................................................................................................119 System requirements for Presto! PageManager .........................................................................119 Technical support ............................................................................................................................120

10 ControlCenter2 Using ControlCenter2 ............................................................................................................................122

Turning the AutoLoad feature off.....................................................................................................123 SCAN...............................................................................................................................................123 CUSTOM SCAN..............................................................................................................................124 COPY / PC-FAX ..............................................................................................................................124 DEVICE SETTINGS ........................................................................................................................124

SCAN.....................................................................................................................................................125 Image (example: Apple PreView) ..................................................................................................125 OCR (word processing application).................................................................................................127 E-mail ..............................................................................................................................................128 Supported file types.........................................................................................................................128 File...................................................................................................................................................129

v

CUSTOM SCAN ....................................................................................................................................130 User-defined button .........................................................................................................................130 Scan to Image .................................................................................................................................131 Scan to OCR ...................................................................................................................................132 Scan to E-mail .................................................................................................................................133 Scan to File......................................................................................................................................134

COPY / PC-FAX (PC-FAX is not available for DCP models).................................................................135 DEVICE SETTINGS ..............................................................................................................................136

Remote Setup (Not available for DCP models and MFC-240C) .....................................................136 Quick-Dial (Not available for DCP models and MFC-240C)............................................................137 Ink Level ..........................................................................................................................................137

11 Network Scanning (For models with built-in network support) Before using Network Scanning ............................................................................................................138

Configuring network scanning .........................................................................................................138 Using the Scan key................................................................................................................................140

Scan to E-mail .................................................................................................................................140 Scan to Image .................................................................................................................................141 Scan to OCR ...................................................................................................................................141 Scan to File......................................................................................................................................142

12 Remote Setup & PhotoCapture Center Remote Setup (Not available for DCP models and MFC-240C)............................................................143 PhotoCapture Center (Not available for MFC-3360C) .......................................................................145

For USB cable users .......................................................................................................................145 For Network users (For models with built-in network support) ........................................................147

A Index

Section I

Windows I

Printing 2 Scanning 22 ControlCenter3 44 Network Scanning (For models with built-in network support) 68 Remote Setup (Not available for DCP models and MFC-240C) 74 Brother PC-FAX Software (MFC models only) 76 PhotoCapture Center (Not available for MFC-3360C) 94

2

1 1

Note The screens in this section are from Windows XP. Screens on your PC may vary depending on your

operating system.

If your PC is protected by a firewall, and is unable to print, you may need to configure the firewall settings to allow communication through port number 137. Visit the Brother Solutions Center (http://solutions.brother.com) for more information.

Using the Brother printer driver 1

A printer driver translates the data from your PC application, and using a page description language, converts it into a format that can be understood by the printer/multi-function device.

You will find appropriate drivers on the CD-ROM supplied with the machine. Install those drivers by following the Quick Setup Guide. You can also download the latest drivers from the Brother Solutions Center at:

http://solutions.brother.com

Features 1

This machine offers many features you will find in a high quality ink jet printer.

Brilliant High Quality Output Printing at up to 1200 6000 dpi on glossy paper to get the highest possible resolution. (See Resolution in Specifications in the Users Guide.) The printer driver supports N in 1, Watermark printing, Colour Enhancement technology and many other features.

Low Running Cost Whenever you run out of a particular ink colour, you only have to replace the empty cartridge.

USB Universal Serial Bus Interface provides fast communication with your PC.

Ethernet The Ethernet interface lets your machine communicate with multiple PCs connected on a network. This feature is available for Network Standard models only.

Wireless LAN (IEEE802.11b/g) (For Wireless models only) The wireless LAN capability lets your machine communicate with other wireless devices using the IEEE802.11b/g wireless standard in Infrastructure and Ad-hoc modes. (See the Network Users Guide for details.) This feature is available for Wireless Network Standard models only.

Printing 1

Printing

3

1 Choosing the right type of paper 1

For high quality printing, it is important to choose the right type of paper. Be sure to read About paper in the Users Guide before buying paper.

Simultaneous printing, scanning and faxing 1

Your machine can print from your PC while sending or receiving a fax in memory, or while scanning a document into the PC. Fax sending will not be stopped during PC printing.

However, when the machine is copying or receiving a fax on paper, it pauses the PC printing operation, and then continues printing when copying or fax receiving has finished.

Clearing data from the memory 1

If the LCD shows Data Remaining, you can clear the data that is left in the memory by pressing the Stop/Exit key on the control panel.

Checking the print quality 1

If you want to check the print quality and find out how to improve it, see Improving print quality in the Users Guide.

Printing

4

1 Status Monitor 1

The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of error messages such as paper empty, paper jam or ink empty.

You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing Status Monitor located in Start/All Programs/Brother/MFC-XXXX on your PC.

Note For more information about using the Status Monitor software, right-click the Status Monitor icon and choose Help.

Monitoring the machines status 1

Once you start up your PC, the Status Monitor icon appears on the tasktray.

A green icon indicates the normal stand-by condition.

A yellow icon indicates a warning.

A red icon indicates an error has occurred.

There are two locations where you can display the status monitor on your PCin the tasktray or on the desktop.

Printing

5

1 Turning off the status monitor 1

If you want to switch off the status monitor, follow these steps:

a Right-click the Status Monitor icon or window and click Load Status Monitor on Startup to clear the check mark.

b Right-click again then click Exit.

Note Even if the status monitor is off, you can check the machines status at any time by clicking Status Monitor from the Start menu on your PC.

Printer driver settings 1

You can change the following printer settings when you print from your PC:

Media Type/Quality (Speed)

Paper Size Page Layout Colour Matching/Halftone Colour Enhancement Scaling Watermark Print Date & Time Quick Print Setup

Accessing the printer driver settings 1

a Click File, then Print in your application.

b Choose Brother MFC-XXXX USB Printer or Brother MFC-XXXX Printer (where XXXX is your model name) and click Properties. The printer properties dialog box appears.

Printing

6

1 Basic tab 1

a Choose your setting for Slow Drying Paper, Media Type and Quality (1).

Note Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may cause some slight blurring of text.

b Choose Paper Size, Page Layout, Page Order, Borderless, Border Line (if any), Orientation, number of Copies and the page order (2).

c Select the Paper Source. (MFC-5860CN only)

Note If you choose Auto Select, the machine will take paper from Tray 1 and when Tray 1 is empty, paper will automatically be taken from Tray 2.

d Click OK (3) to apply your chosen settings. To return to the default settings, click Default (4), then OK (3).

Note This area (5) shows the current settings of Quality, Paper Size, Page Layout, Page Order, Orientation, Collate/Reverse Order and Colour/Greyscale.

1

5

2

4

3

Printing

7

1 Media Type 1

To achieve the best print results, the media being printed on should be selected in the driver. The machine changes the way it prints depending on the selected media type.

Plain Paper Inkjet Paper Brother Premium Glossy Photo Paper Other Photo Paper Transparencies

Quality 1

The quality selection lets you choose the print resolution. As print quality and speed are related, the higher the quality, the longer it will take to print the document. The quality selections that are available will vary depending on the media type you choose.

Highest Up to 1200 6000 dpi. (See Resolution in Specifications in the Users Guide.) Use for printing precise images such as photographs. This is the highest resolution and slowest speed.

Photo

Up to 1200 2400 dpi. Use for printing photographs. Since the print data is much larger than a normal document, the processing time, data transfer time and print time will be longer.

Fine 1200 1200 dpi. Better print quality than Normal mode and faster print speed than Photo.

Normal 600 600 dpi. Good print quality with typical print speed.

Fast Normal 600 300 dpi. Better print quality than Fast mode and faster print speed than Normal. Fast 600 150 dpi. The fastest print mode and the lowest amount of ink used. Use for printing large volume documents or documents for proofing.

Media Type Colour/Greyscale Print Quality Selection Plain Paper Colour/Greyscale Fast, Fast Normal, Normal, Fine Inkjet Paper Colour/Greyscale Fine, Photo Brother Premium Glossy Photo Paper or Other Photo Paper

Colour/Greyscale Fine, Photo, Highest

Transparencies Colour/Greyscale Normal, Fine

Printing

8

1 Note

The default settings are shown in bold.

For DCP-130C and MFC-240C, the Highest Print Quality selection is not available if you choose borderless printing.

Enhanced Print Settings 1

Click the Settings button to see options for enhanced print settings.

Bi-Directional Printing 1

When Bi-Directional Printing is checked, the print head prints in both directions offering faster print speeds. When unchecked, the print head will only print in one direction giving higher quality printouts, but slower printing speeds.

Printing

9

1 Colour Enhancement 1

This feature analyzes your image to improve its sharpness, white balance and density. This process may take several minutes depending on the size of the image and the specifications of your PC.

Colour Density Adjusts the total amount of colour in the image. You can increase or decrease the amount of colour in an image to improve a washed out or weak looking picture.

White Balance Adjusts the hue of the white areas of an image. Lighting, camera settings and other influences will effect the appearance of white. The white areas of a picture may be slightly pink, yellow or some other colour. By adjusting the white balance you can adjust those white areas.

Sharpness Enhances the detail of an image, similar to adjusting the fine focus on a camera. If the image is not in true focus and you cannot see the fine details of the picture, then adjust the sharpness.

Auto Image Enhance Allows alteration of individual picture settings to improve the printed image and analyzes data from surrounding or neighbouring pixels in the document.

Brightness Adjusts the brightness of the whole image. To lighten or darken the image, move the scroll bar to the left or right.

Contrast Adjusts the contrast of an image. This will make darker areas darker and lighter areas lighter. Increase the contrast when you want an image to be clearer. Decrease the contrast when you want an image to be more subdued.

Red Increases the intensity of Red in the image.

Green Increases the intensity of Green in the image.

Printing

10

1 Blue Increases the intensity of Blue in the image.

Improve Pattern Printing (Windows 2000/XP only) Select the Improve Pattern Printing option if printed fills and patterns appear different to how they appear on your PC screen.

Paper Size 1

The Paper Size selection includes a large selection of standard paper sizes. If you want, you can create a custom size ranging from 88.9 127.0 mm (3.5 5 in.) to 215.9 355.6 mm (8.5 14 in.). You can also choose the borderless setting for specific paper sizes. From the drop-down list, choose the Paper Size you are using.

You can create a custom size by choosing User Defined Size. Specify the Width and Height values, and enter any name you want for this custom size. Choose the correct paper thickness to improve the quality of your output.

Borderless printing 1

From the Paper Size pull down list choose the size of paper you want to print such as A4 (borderless).

Printing

11

1 Page Layout 1

The Page Layout option lets you choose the N in 1 options or the 1 in N options. The N in 1 options print 2, 4, 9 or 16 pages of a document on 1 sheet of paper. The 1 in N options enlarges your print size and prints the document in poster print mode.

Note If you are using Windows 98/98SE/Me, the 4 in 1, 9 in 1 and 16 in 1 layout is not available.

Page Order (Windows 2000/XP only) 1

When N in 1 option is selected, the Page Order can be selected from the drop-down menu.

Border Line 1

When printing multiple pages on one sheet with the Page Layout feature, you can choose to have a solid border, dashed border or no border around each page on the sheet.

Orientation 1

Orientation chooses the position your document will be printed (in Portrait or Landscape).

Note If your application software contains a similar function to this, we recommend you use the one in the application.

Portrait (Vertical) Landscape (Horizontal)

Printing

12

1 Copies 1

The Copies selection sets the number of copies that will be printed (1 to 999).

Collate 1

With Collate checked, one complete copy of your document will be printed and then reprinted according to the number of copies you choose. If Collate is unchecked, then each page will be printed according to the number of copies chosen before the next page of the document is printed.

Reverse Order 1

Reverse Order prints the pages of your document in the opposite order.

Paper Source (MFC-5860CN only) 1

The Paper Source selection sets the paper tray from which the machine will feed the paper when printing. If you choose Auto Select, the machine will take paper from Tray 1. When Tray 1 is empty, Auto Select allows the machine to take paper from Tray 2 if both trays are using paper that is the same type and size.

Note You can only use Plain Paper for Media Type, and Letter, Legal, A4, Executive or B5 for Paper Size in

Tray 2.

Tray 2 does not support Borderless printing.

Printing

13

1 Advanced tab 1

Change the tab settings by clicking one of the following icons:

Colour (1)

Scaling (2)

Watermark (3)

Device Options (4)

Note To return to the default settings, click Default.

1 2 3 4

Printing

14

1 Colour 1

Colour/Greyscale 1

This selection allows a colour document to be printed in black and white using greyscale.

Image Type 1

The printer driver will choose the most suitable colour matching and half tone method, depending on your image type. Generally, text and business graphics are printed vividly and photographic images are printed softly.

Auto The printer driver automatically chooses the image type.

Photo Use for photographic images.

Graphics Use for documents that contain text or business graphics (charts or clip art).

Custom If you want to choose the colour matching and halftone method, choose this mode.

Printing

15

1 Custom Image Type 1

You can choose the colour matching method manually. Choose the best one for your document.

Match Monitor Colour is adjusted to get the closest colour match with the PC monitor.

Natural: Use for photographic images. The colour is adjusted to print more natural colours.

Vivid: Use for business graphics such as charts, graphics and text. The colour is adjusted to print more vivid colours.

Halftone Pattern The machine can use two methods (Diffusion or Dither) to arrange dots to express halftones. There are some predefined patterns and you can choose which one to use for your document.

Diffusion: Dots are put at random to create the halftones. Use for printing photographs that have delicate shades and graphics.

Dither: Dots are arranged in a pre-defined pattern to make halftones. Use for printing graphics that have definite colour boundaries or for printing charts such as business charts.

Printing

16

1 Note

Some halftone settings cannot be chosen with certain combinations of Media Type and Quality settings.

Scaling 1

You can change the print size of your document with the Scaling feature.

Choose Off if you want to print the document as it appears on your screen.

Choose Fit to Paper Size if your document has an unusual size, or if you only have standard size paper.

Choose Free if you want to reduce the size.

Check Mirror Print to reverse the data from left to right.

Note Mirror Print is not available when you choose Transparencies as the Media Type.

Printing

17

1 Watermark 1

You can print a logo or text onto your document as a Watermark. You can choose one of the preset Watermarks, or you can use a bitmap file or text file that you have created.

Check Use Watermark, and then choose the watermark you want to use.

In background 1

Check In background to print the watermark image in the background of your document. If this feature is unchecked, the Watermark will be printed on top of your document.

In Outline Text (Windows 2000/XP only) 1

Check In Outline Text if you only want to print an outline of the watermark.

Print Watermark 1

You can print the watermark in any of the following ways:

On all pages On first page only From second page Custom

Printing

18

1 Watermark Setting 1

You can change the watermark size and position on the page by choosing the watermark, and clicking the Edit button. If you want to add a new watermark, click the New button, and then choose Text or Bitmap in Watermark Style.

Title Choose CONFIDENTIAL, COPY or DRAFT as the title or enter a title you like in the field.

Watermark Text Enter your watermark text into the Text Box, and then choose Font, Size, Colour and Style.

Watermark Bitmap Enter the file name and location of your bitmap image in the File box, or click Browse to search for the file. You can also set the scaling size of the image.

Position Use this setting if you want to control the position of the watermark on the page.

Printing

19

1 Device Options 1

You can set the following Printer Functions:

Print Date & Time 1

When the Print Date & Time feature is enabled, the date and time will print on your document from your PCs system clock.

Click the Setting button to change the Date, Time, Position and Font. To include a background with the Date and Time, choose Opaque. When Opaque is chosen, you can click the Colour button to change the colour of the Date and Time background.

Note The selection box shows the format of Date and Time to be printed. The actual Date and Time printed on your document is automatically retrieved from the settings on your PC.

Printing

20

1 Quick Print Setup 1

The Quick Print Setup feature lets you quickly choose driver settings. Set Quick Print Setup to On and choose the function which should be displayed in the Quick Print Setup icon menu. To view and change settings, click the tasktray icon.

Printing

21

1 Support tab 1

The Support tab shows the driver version and settings information. There are also links to the Brother Solutions Center and driver update web sites.

Click the Support tab to display the following screen:

Brother Solutions Center The Brother Solutions Center is a web site offering information about your Brother product including FAQs (Frequently Asked Questions), Users Guides, driver updates and tips for using your machine.

Web Update You can check the Brother web site for automatic downloads to update the printer driver on your PC.

Check Setting You can check current driver settings.

22

2

2 Scanning operations and the drivers used will differ depending on the operating system you are using. As default, the machine uses a TWAIN compliant driver when scanning documents from your applications.

For Windows XP

Two scanner drivers are installed. A TWAIN compliant scanner driver (See TWAIN compliant on page 22) and a Windows Imaging Acquisition (WIA) driver (See Scanning a document using the WIA driver (Windows XP only) on page 29). Windows XP users can select either driver when scanning documents.

Note For ScanSoft PaperPort SE, see Using ScanSoft PaperPort SE with OCR on page 40.

If your PC is protected by a firewall and is unable to scan, you may need to configure the firewall settings to allow communication through port number 137 and 54925. Visit the Brother Solutions Center (http://solutions.brother.com) for more information.

Scanning a document using the TWAIN driver 2

TWAIN compliant 2

The Brother MFL-Pro Suite software includes a TWAIN compliant scanner driver. TWAIN drivers meet the standard universal protocol for communicating between scanners and applications. This means that you can not only scan images directly into the PaperPort SE viewer that Brother included with your machine, but you can also scan images directly into hundreds of other software applications that support TWAIN scanning. These applications include popular programs, such as Adobe Photoshop, Adobe PageMaker, CorelDraw and many more.

Scanning 2

Scanning

23

2

Accessing the Scanner 2

a Start the ScanSoft PaperPort SE software that was installed during the MFL-Pro Suite installation to scan a document.

Note The instructions for scanning in this Guide are for when you use ScanSoft PaperPort SE. The scanning steps may vary when using other software applications.

b Click File, then Scan. Or click the Scan button. The Scan panel appears in the left side of the screen.

c Choose the scanner you are using from the Scanner drop-down list.

Note For Windows XP:

Choose TW-Brother MFC-XXXX USB or TW-Brother MFC-XXXX LAN. For other operating systems:

Choose Brother MFC-XXXX USB or Brother MFC-XXXX LAN. (Where XXXX is your model name)

d Click Scan. The Scanner Setup dialog box appears:

Scanning

24

2

Scanning a document into the PC 2

You can scan a whole page, or a portion of the page by pre-scanning the document.

Scanning a whole page 2

a Load your document.

b Adjust the following settings, if needed, in the Scanner Setup dialog box: Scan (Image Type) Resolution Scan Type Brightness Contrast Document Size

c Click Start. When scanning is finished, click Cancel to return to the PaperPort SE window.

Note After you select a document size, you can adjust the scanning area further by clicking the left mouse button and dragging it. This is required when you want to crop an image when scanning.

Pre-Scanning an image to crop a portion you want to scan 2

The PreScan button is used to preview an image and also lets you crop any unwanted areas from the image. When you are satisfied you are scanning the correct area, click the Start button in the Scanner Setup dialog box to scan the image.

a Load your document.

b Choose the settings for Image Type, Resolution, Scan Type, Brightness, Contrast and Document Size as needed.

1

Scanning

25

2

c Click PreScan. The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup dialog box.

d Press and hold down the left mouse button and drag it over the portion you want to scan.

Note

You can enlarge the image using the icon, and then use the icon to restore the image to its original size.

e Load your document again.

Note Skip this step if you loaded the document on the scanner glass in step a.

f Click Start. This time only the chosen area of the document appears in the PaperPort SE window (or your application window).

g In the PaperPort SE window, use the options available to refine the image.

Settings in the Scanner Setup dialog box 2

Image Type 2

Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be automatically altered for each of the default settings.

The default settings are listed in the table below:

Image Type Resolution Scan Type Photo Use for scanning photo images 300 300 dpi 24 bit colour Web Use for attaching the scanned image to web pages 100 100 dpi 24 bit colour Text Use for scanning text documents 200 200 dpi Black & White

Scanning

26

2

Resolution 2

You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colours.

Scan Type 2

Black & White Use for text or line art images.

Grey (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey images without using true grey dots. Black dots are put in a specific pattern to give a grey appearance.)

True Grey Use for photographic images or graphics. This mode is more exact because it uses up to 256 shades of grey.

256 Colour Uses up to 256 colours to scan the image.

24 bit Colour Uses up to 16.8 million colours to scan the image.

Although using 24 bit Colour creates an image with the most accurate colour reproduction, the image file size will be about three times larger than a file created using the 256 Colour option. It requires the most memory and has the longest transfer time.

Resolution Black & White/ Grey (Error Diffusion)

256 colour True Grey/24bit colour

100 100 dpi Yes Yes Yes 150 150 dpi Yes Yes Yes 200 200 dpi Yes Yes Yes 300 300 dpi Yes Yes Yes 400 400 dpi Yes Yes Yes 600 600 dpi Yes Yes Yes 1200 1200 dpi Yes No Yes 2400 2400 dpi Yes No Yes 4800 4800 dpi Yes No Yes 9600 9600 dpi Yes No Yes 19200 19200 dpi Yes No Yes

Scanning

27

2

Brightness 2

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average and is usually suitable for most images.

You can set the Brightness level by dragging the slide bar to the right or left to lighten or darken the image. You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again.

Note The Brightness setting is only available when you set Scan Type to Black & White, Grey or True Grey.

Contrast 2

You can increase or decrease the contrast level by moving the slide bar to the left or right. An increase emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can also enter a value in the box to set the Contrast.

Note The Contrast setting is only available when you set Scan Type to Grey or True Grey.

When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits your needs.

Document Size 2

Choose one of the following sizes:

A4 210 297 mm

JIS B5 182 257 mm

Letter 8 1/2 11 in.

Legal 8 1/2 14 in. (Available on ADF models)

A5 148 210 mm

Executive 7 1/4 10 1/2 in.

Business Card

To scan business cards, choose the Business Card size, and then put the business card face down at the center of the scanner glass.

Photo 4 6 in.

Index Card 5 8 in.

Photo L 89 127 mm

Photo 2L 127 178 mm

Postcard 1 100 148 mm

Postcard 2 148 200 mm

Scanning

28

2

Custom (User adjustable from 0.35 0.35 in. to 8.5 14 in. or 8.9 8.9 mm to 215.9 355.6 mm.)

If you choose Custom as the size, the Custom Document Size dialog box appears.

Enter the Name, Width and Height of the document.

You can choose mm or inch as the unit for Width and Height.

Note You can see the actual paper size you chose on the screen.

Width: shows the width of scanning area.

Height: shows the height of scanning area.

Data Size: shows the approximate data size in Bitmap format. The size will vary depending on the type of file, resolution and number of colours used.

Scanning

29

2

Scanning a document using the WIA driver (Windows XP only) 2

WIA compliant 2

For Windows XP you can choose Windows Image Acquisition (WIA) when scanning images. You can scan images directly into the PaperPort SE viewer that Brother included with your machine or you can scan images directly into any other applications that support WIA or TWAIN scanning.

Accessing the scanner 2

a Open your software application to scan the document.

Note The instructions for scanning in this Guide are based on ScanSoft PaperPort SE. The process will vary when scanning from other applications.

b Click File, then Scan. Or click the Scan button. The Scan panel appears on the left side of the screen.

c Choose the scanner you are using from the Scanner drop-down list.

Note Choose WIA-Brother MFC-XXXX USB or WIA-Brother MFC-XXXX LAN (Where XXXX is your model

name). If you choose TW-Brother MFC-XXXX, the TWAIN driver will start.

d Click Scan. The Scan dialog box appears:

Scanning

30

2

Scanning a document into the PC 2

There are two ways to scan a whole page. You can either use the ADF (automatic document feeder) or the scanner glass.

If you want to scan and then crop a portion of a page after pre-scanning the document, you must scan using the scanner glass. (See Pre-Scanning an image to crop a portion you want to scan on page 24.)

Scanning a document using the ADF (Available for ADF model) 2

a Load your document.

1 Paper source 2 Picture type 3 Adjust the quality of the scanned picture 4 Page size

b Choose Document Feeder from the Paper source drop-down list (1).

c Choose the picture type (2).

d Choose the Page size from the drop-down list (4).

1

2

3

4

Scanning

31

2

e If you want to change some advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties. Click OK after you choose the settings.

Note By default, the scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher resolutions, use the Brother Scanner Utility. (See Brother Scanner Utility on page 33.)

f Click the Scan button in the Scan dialog box. The machine starts scanning the document.

Scanning

32

2

Pre-Scanning and cropping a portion using the scanner glass 2

The Preview button is used to preview an image for cropping any unwanted portions from the image. When you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.

a Put the document face down on the scanner glass.

b Choose Flatbed in the Paper source drop-down list (1).

Note If your machine has no Auto Document Feeder (ADF), you do not need to specify the Paper source.

1 Paper source 2 Picture type 3 Adjust the quality of the scanned picture 4 Scanning area

c Choose the picture type (2).

d Click Preview. The whole image is scanned into the PC and appears in the scanning area (4).

e Press and hold down the left mouse button and drag it over the portion you want to scan.

1

2 4

3

Scanning

33

2

f If you need to access advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties. Click OK after you choose a setting.

g Click the Scan button in the Scan dialog box. The machine starts scanning the document. This time only the chosen area of the document appears in the PaperPort SE window (or your application window).

Brother Scanner Utility 2

The Brother Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi and for changing the paper size. If you want to set Legal size as the default size, use this utility to change the setting. You must restart your PC for the new settings to take effect.

Running the utility

You can run the utility by choosing Scanner Utility located in Start/All Programs/Brother/MFC-XXXX menu (where XXXX is your model name)/Scanner Settings.

Note If you scan the document at a resolution of greater than 1200 dpi, the file size may dramatically increase. Make sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If you do not have enough memory or hard disk space then your PC may freeze as the document is scanned and you could lose your file.

Scanning

34

2

Using the Scan key (For USB cable users) 2

Note If you use the Scan key on a network, see Using the Scan key on page 71.

You can use the (Scan) key on the control panel to scan documents directly into your word processing, graphics or E-mail applications, to a folder on your PC or to a media card.

Before you can use the (Scan) key on the control panel, you have to install the Brother MFL-Pro software suite and connect the machine to your PC. If you installed the MFL-Pro Suite from the included CD- ROM, then the correct drivers and the ControlCenter3 software are installed. Scanning using the

(Scan) key uses the configuration in the Device Button tab of the ControlCenter3 software. (See SCAN on page 49.) For details about how to configure the scan settings and to launch the application of your choice using the (Scan) key, see Using ControlCenter3 on page 44.

Scan to E-mail 2

You can scan either a black and white or colour document into your E-mail application as a file attachment. You can change the (Scan) key configuration. (See E-mail on page 52.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to E-mail. Press OK.

d Press Mono Start or Colour Start. The machine starts scanning the document, it creates a file attachment, and launches your E-mail application, displaying the new message waiting to be addressed.

Scanning

35

2

Scan to Image 2

You can scan a colour picture into your graphics application for viewing and editing. You can change the (Scan) key configuration. (See Image (example: Microsoft Paint) on page 49.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to Image. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Scan to OCR 2

If your original document is text, you can use ScanSoft PaperPort SE to scan the document and convert it into a text file which can then be edited in your favourite word processing software. You can change the

(Scan) key configuration. (See OCR (Word Processing program) on page 51.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to OCR. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Scanning

36

2

Scan to File 2

You can scan a black and white or a colour document into your PC and save it as a file in the folder you choose. The file type and specific folder are based on the settings you have chosen in the Scan to File configuration screen of ControlCenter3. (See File on page 53.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to File. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Note You can choose colour or black and white scanning in the scan type option in the Device Button tab of the ControlCenter3 configuration screen. (See File on page 53.)

Scan to Card (Not available for MFC-240C and MFC-3360C) 2

You can scan black and white and colour documents directly to a media card. Black and white documents will be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. File names are based on the current date. For example, the fifth image scanned on July 1, 2006 would be named 01070605.PDF. You can change the colour, quality and file name.

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

Resolution (For Monochrome Display models)

Resolution (For Colour Display models)

File Format Options Default File Format

B/W 200x100 dpi 200x100dpi B/W TIFF / PDF TIFF B/W 200 dpi 200dpi B/W TIFF / PDF TIFF Color 150 dpi 150dpi Color JPEG / PDF PDF Color 300 dpi 300dpi Color JPEG / PDF PDF Color 600 dpi 600dpi Color JPEG / PDF PDF

Scanning

37

2

CAUTION

DO NOT unplug the power cord or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the card (the PhotoCapture key is flashing). You could lose your data or damage the card. If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once before putting the media card back in. If you put in another media card before the PC is restarted, the data on it may be destroyed.

b Load your document.

c Press the (Scan) key.

d Press a or b to choose Scan to Card. Press OK. Do one of the following:

To change the quality, go to e. To start scanning without changing any settings, press Mono Start or Colour Start.

e Press a or b to choose the quality you want. Press OK. Do one of the following:

To change the file type, go to f. To start scanning without changing any settings, press Mono Start or Colour Start.

f Press a or b to choose the file type you want. Press OK. Do one of the following:

To change the file name, go to g. To start scanning without changing any settings, press Mono Start or Colour Start.

Note If you choose colour in the resolution setting, you cannot choose TIFF. If you choose monochrome in the resolution setting, you cannot choose JPEG.

g The file name is set automatically. However, you can create a name of your choice using the dial pad. You can only change the first 6 digits of the file name. (MFC models only) Press OK.

Note Press Stop/Exit or Clear/Back to delete the letters you entered.

h Press Mono Start or Colour Start to start scanning.

Scanning

38

2

Changing the default quality 2

(For MFC-5460CN and 5860CN) 2

a Press Menu, 4, 9, 1.

b Press a or b to choose B/W 200x100 dpi, B/W 200 dpi, Color 150 dpi, Color 300 dpi or Color 600 dpi. Press OK.

c Press Stop/Exit.

(For DCP-130C) 2

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 1.Quality. Press OK.

e Press a or b to choose B/W 200x100 dpi, B/W 200 dpi, Color 150 dpi, Color 300 dpi or Color 600 dpi. Press OK.

f Press Stop/Exit.

Changing the default black & white file format 2

(For MFC-5460CN and 5860CN) 2

a Press Menu, 4, 9, 2.

b Press a or b to choose TIFF or PDF. Press OK.

c Press Stop/Exit.

(For DCP-130C) 2

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 2.B/W File Type. Press OK.

e Press a or b to choose TIFF or PDF. Press OK.

f Press Stop/Exit.

Scanning

39

2

Changing the default colour file format 2

(For MFC-5460CN and 5860CN) 2

a Press Menu, 4, 9, 3.

b Press a or b to choose PDF or JPEG. Press OK.

c Press Stop/Exit.

(For DCP-130C) 2

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 3.ColorFile Type. Press OK.

e Press a or b to choose PDF or JPEG. Press OK.

f Press Stop/Exit.

Scanning

40

2

Using ScanSoft PaperPort SE with OCR 2

ScanSoft PaperPort SE for Brother is a document management application. You can use PaperPort SE to view scanned documents.

Not just viewing, PaperPort SE has a sophisticated yet easy-to-use filing system that will help you organize your graphics and text documents. It lets you mix or stack documents of different formats for printing, faxing or filing.

This chapter only introduces the basic functions of the software. For more details, see the ScanSoft users guide.

To view the complete ScanSoft PaperPort SE Users Guide, choose Help from the PaperPort SE menu bar and click Users Guide.

When you install MFL-Pro Suite, ScanSoft PaperPort SE for Brother is installed automatically.

You can access ScanSoft PaperPort SE through the ScanSoft PaperPort SE program group located in Start/All Programs/ScanSoft PaperPort SE on your PC.

Scanning

41

2

Viewing items 2

ScanSoft PaperPort SE gives several ways to view items:

Desktop View displays the item in the chosen folder with a thumbnail (a small graphic that shows each item in a desktop or folder) or an icon.

You can see both PaperPort SE items (MAX files) and non-PaperPort SE items (files created using other applications).

Non-PaperPort SE items include an icon that indicates the application that was used to create the item.

Page View displays a close-up of a single page. You can open a PaperPort SE item by double-clicking its icon or thumbnail in Desktop View.

As long as you have the appropriate application on your PC to display it, you can also open a non-PaperPort SE item with an appropriate application by double-clicking.

Scanning

42

2

Organizing your items in folders 2

PaperPort SE has an easy-to-use filing system for organizing your items. The filing system consists of folders and items that you choose to view in Desktop View. An item can be a PaperPort SE item or a non- PaperPort SE item:

Folders are arranged in a tree structure in the Folder View. You use this section to choose folders and view their items in Desktop View.

You can simply drag and drop an item onto a folder. When the folder is highlighted, release the mouse button and the item is stored in that folder.

Folders can be nestedthat is, stored in other folders.

When you double-click a folder, its contents (both PaperPort SE MAX files and non PaperPort SE files) appear on the Desktop.

You can also use Windows Explorer to manage the folders and items shown in Desktop View.

Quick links to other applications 2

ScanSoft PaperPort SE automatically recognizes many other applications on your PC and creates a working link to them.

The Send To Bar at the bottom of the Desktop view shows icons for those linked applications.

To use a link, drag an item onto one of the icons to start that application. A typical use of the Send To Bar is to choose an item and then fax it.

This sample Send To Bar shows several applications with links to PaperPort SE.

If PaperPort SE does not automatically recognize one of the applications on your PC, you can manually create a link using the New Program Link command.

ScanSoft PaperPort SE with OCR lets you convert image text into text you can edit 2

ScanSoft PaperPort SE can quickly convert the text on a ScanSoft PaperPort SE item (which is really just a picture of the text) into text that you can edit with a word processing application.

PaperPort SE uses the optical character recognition software (OCR), which comes with PaperPort SE.

PaperPort SE can use your preferred OCR application if it is already on your PC. You can convert the entire item, or by using the Copy Text command, you can choose only a portion of the text to convert.

Dragging an item onto a word-processing link icon starts PaperPort SEs built-in OCR application, or you can use your own OCR application.

Scanning

43

2

You can import items from other applications 2

As well as scanning items, you can bring items into PaperPort SE in a variety of ways and convert them to PaperPort SE (MAX) files in several different ways:

Print to the Desktop View from another application, such as Microsoft Excel.

Import files saved in other file formats, such as Windows Bitmap (BMP) or Tagged Image File Format (TIFF).

You can export items into other formats 2

You can export or save PaperPort SE items in several popular file formats, such as BMP, JPEG, TIFF, PDF or as a self-viewing executable (.EXE) file.

Exporting an image file 2

a Click File, then Save As in the PaperPort SE window. The Save XXXXX as dialog box is displayed.

b Choose the drive and folder where you want to store the file.

c Enter the new file name and choose the file type.

d Click Save to save your file, or Cancel to return to PaperPort SE without saving it.

Uninstalling ScanSoft PaperPort SE with OCR 2

For Windows 98/98SE and Windows Me 2

a Click the Start button, Settings, Control Panel, Add/Remove Programs, and click the Install/Uninstall tab.

b Choose PaperPort from the list and click Add/Remove.

For Windows 2000 Professional 2

a Click the Start button, Settings, Control Panel, then Add/Remove Programs.

b Choose PaperPort from the list and click Change or Remove.

For Windows XP 2

a Click the Start button, Control Panel, Add or Remove Programs, and click the Change or Remove Programs icon.

b Choose PaperPort from the list and click Change or Remove.

44

3

3

Note The features available to you in ControlCenter3 may vary depending on the model number of your machine.

Using ControlCenter3 3

ControlCenter3 is a software utility that lets you quickly and easily access your frequently used applications. Using ControlCenter3 eliminates the need to manually launch specific applications. ControlCenter3 has the following operations:

a Scan directly to a file, E-mail, word processor or graphics application of your choice. (1)

b Access to the Custom Scan settings. Custom Scan buttons let you configure a button to meet your own application needs. (2)

c Access to the advanced features of PhotoCapture Center. (3)

d Access the Copy features available via your PC. (4)

e Access the PC-FAX applications available for your device. (5)

f Access the settings available to configure your device. (6)

g You can choose which machine ControlCenter3 will connect with from the Model drop-down list. (7)

h You can also open the configuration window for each function and a link to the Brother Solutions Center by clicking the Configuration button. (8)

ControlCenter3 3

ControlCenter3

45

3

Modern 3

Classic 3

Note To be able to choose another connected model from the Model drop-down list, you must have the

MFL-Pro Suite Software installed on your PC for that model.

To use the Modern user interface, you need to have Macromedia Flash Player 8 or greater installed. If you do not have it installed, the installer will open Internet Explorer so you can download the latest version of the Flash Player. If Internet Explorer does not open automatically, you should open it manually.

The modern user interface is not supported in Windows XP Professional x64 Edition.

7

1,

8

2

3

4

5

6

7

1

8

2 3 4 5 6

ControlCenter3

46

3

Switching the user interface 3

You can choose the Modern or Classic user interface for ControlCenter3.

a To switch the user interface, click the Configuration button and select SETUP then SKIN SELECT.

b From the SKIN SELECT dialog, you can choose your preferred user interface.

Turning the AutoLoad feature off 3

Once you start ControlCenter3 from the Start menu, the icon will appear on the tasktray. You can open the ControlCenter3 window by double-clicking the icon.

If you do not want ControlCenter3 to run automatically each time you start your PC;

a Right-click the ControlCenter3 icon in the tasktray , and choose Preferences. The ControlCenter3 preference window appears.

b Uncheck Start ControlCenter on computer startup.

c Click OK to close the window.

ControlCenter3

47

3

SCAN 3

There are four scan options: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File.

Image (Default: Microsoft Paint)

Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination application, such as Microsoft Paint, Corel Paint Shop Pro, Adobe PhotoShop, or any kind of image editing application on your PC.

OCR (Default: Microsoft NotePad)

Lets you scan a page or document, automatically run the OCR application and put text (not a graphic image) into a word processing application. You can choose the target word processing application, such as Microsoft NotePad, Microsoft Word, Corel WordPerfect or any word processing application on your PC.

E-mail (Default: your default E-mail software)

Lets you scan a page or document directly into an E-mail application as a standard attachment. You can choose the file type and resolution for the attachment.

File Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.

ControlCenter3 gives you the ability to configure the hardware Scan key on your machine and the ControlCenter3 Software button for each scan feature. To configure the hardware Scan key on your machine choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure the Software button in ControlCenter3 choose the Software Button tab in the configuration menu for each of the SCAN buttons.

CUSTOM SCAN 3

You can configure the button name and settings for each of these buttons to meet your specific needs by right-clicking a button and following the configuration menus.

PHOTOCAPTURE (USB only) (Not available for MFC-3360C) 3

There are three ways of accessing data stored on a media card. These access methods are only available when the machine is connected to the PC by a USB cable.

Open PCC Folder Lets you see the files and folders that are on the media card. (See For USB cable users on page 94.)

Copy From PCC Lets you copy the files on the media card to a specific folder on your PC. You can choose the destination folder.

Copy To Application Lets you copy the files on the media card directly to a specific application.

ControlCenter3

48

3

COPY 3

Lets you use the PC and any printer driver for enhanced copy operations. You can scan a page on the machine and print copies using any of the features of the machines printer driver, or you can direct the copy output to any standard printer driver installed on the PC including network printers.

You can configure your preferred settings on up to four buttons.

PC-FAX (MFC models only) 3

These buttons are for sending or receiving faxes using the Brother PC-FAX application.

Send Lets you scan a page or document and automatically send the image as a fax from the PC using the Brother PC-FAX software. (See PC-FAX sending on page 76.)

Receive (Not available for MFC-240C and MFC-3360C)

By clicking this button, the PC-FAX receive software is activated and your PC starts receiving fax data from your Brother machine. After activating the PC-FAX option, the icon name changes to View Received which when clicked will open the PC-FAX viewer application and display the received faxes. Before using the PC-FAX Receive option, you must select the PC-FAX Receive option from the control panel menu of the Brother machine. (See PC-FAX receiving (Not available for MFC-240C and MFC-3360C) on page 89.)

Address Book Lets you open the Brother PC-FAX address book. (See Brother Address Book on page 82.)

Setup Lets you configure the PC-FAX sending settings. (See Sending setup on page 78.)

DEVICE SETTING 3

You can configure the machine settings or check ink levels.

Remote Setup (Not available for DCP models and MFC-240C)

Lets you open the Remote Setup Program. (See Remote Setup on page 74.)

Quick-Dial (Not available for DCP models and MFC-240C)

Lets you open the Set Quick-Dial window of Remote Setup. (See Remote Setup on page 74.)

Ink Level Lets you check the ink status.

Users Guide Lets you view the Software Users Guide and the Network Users Guide.

ControlCenter3

49

3

SCAN 3

There are four scan options: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File applications.

Note You can configure your machines Scan key for each ControlCenter3 button in the Device Button tab.

Image (example: Microsoft Paint) 3

The Scan to Image feature lets you scan an image directly into your graphics application for image editing. To change the default settings, right-click the Image button, click ControlCenter Configuration and click the Software Button tab.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

ControlCenter3

50

3

Change the other settings, if needed.

To change the destination application, click the Target Application drop-down list and choose your preferred application. You can add an application to the list by clicking the Add button.

Enter the Application Name (up to 30 characters) and the Application Location. You can also find the

application location by clicking the icon. Choose File Type from the drop-down list.

You can delete an application that you have added by clicking the Delete button in the Software Button tab.

Note This function is also available for Scan to E-mail and Scan to OCR. The window may vary depending on the function.

ControlCenter3

51

3

OCR (Word Processing program) 3

Scan to OCR scans a document and converts it into text. This text can be edited using your favorite word processing software.

To configure Scan to OCR, right-click the OCR button, click ControlCenter Configuration and click the Software Button tab.

To change the word processing application, choose the destination word processing application from the Target Application drop-down list. You can add an application to the list by clicking the Add button. To delete an application, click the Delete button in the Software Button tab.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

You can also configure the other settings for Scan to OCR.

ControlCenter3

52

3

E-mail 3

Scan to E-mail lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. To change the default E-mail application or attachment file type, right-click the E-mail button, click ControlCenter Configuration and click the Software Button tab.

To change the E-mail application, choose your preferred E-mail application from the E-mail Application drop-down list. You can add an application to the list by clicking the Add button 1. To delete an application, click the Delete button. 1 When you first start ControlCenter3 a default list of compatible E-mail applications will appear in the drop-down list. If you are having trouble using

a custom application with ControlCenter3 you should choose an application from the list.

You can also change the other settings used to create the file attachments.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

Supported file types 3

You can choose from the following list of file types when saving to a folder.

Choose from the drop-down list the type of file you want the scanned images to be saved in.

Windows Bitmap (*.bmp)

JPEG (*.jpg)

TIFF - Uncompressed (*.tif)

TIFF - Compressed (*.tif)

TIFF Multi-Page - Uncompressed (*.tif)

TIFF Multi-Page - Compressed (*.tif)

Portable Network Graphics (*.png)

PDF (*.pdf)

ControlCenter3

53

3

File 3

The Scan to File button lets you scan an image to a folder on your hard disk in one of the file types shown in the file attachment list. To configure the file type and folder, right-click the File button, click ControlCenter Configuration and click the Software Button tab.

Choose the file type for the saved image from the File Type drop-down list. You can save the file to the default

folder shown in the Destination Folder, or choose your preferred folder by clicking the icon.

To display where the scanned image is saved when scanning is finished, check the Show Folder box. To let you specify the destination of the scanned image every time you scan, check the Show Save as Window box.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

ControlCenter3

54

3

CUSTOM SCAN 3

The Custom Scan option lets you create your own scan options.

For Modern interface users, click Custom.

To customize a button, right-click the appropriate button and click ControlCenter Configuration. There are four options: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File.

Modern 3

Classic 3

ControlCenter3

55

3

Customizing a user-defined button 3

To customize a button, right-click the button, then click the ControlCenter Configuration button to see the configuration window.

Scan to Image 3

General tab

To create the button name, enter a name in the Please enter a name for the Custom Button text field (up to 30 characters).

Choose the type of scan from the Scan Action field.

Settings tab

Choose the Target Application, File Type, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter3

56

3

Scan to OCR 3

General tab

To create the button name, enter a name in the Please enter a name for the Custom Button text field (up to 30 characters).

Choose the type of scan from the Scan Action field.

Settings tab

Choose the Target Application, File Type, OCR Software, OCR Language, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter3

57

3

Scan to E-mail 3

General tab

To create the button name, enter a name in the Please enter a name for the Custom Button text field (up to 30 characters).

Choose the type of scan from the Scan Action field.

Settings tab

Choose the E-mail Application, File Type, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter3

58

3

Scan to File 3

General tab

To create the button name, enter a name in the Please enter a name for the Custom Button text field (up to 30 characters).

Choose the type of scan from the Scan Action field.

Settings tab

Choose the file format from the File Type drop-down list. Save the file to the default folder which is shown

in the Destination Folder box or choose your preferred folder by clicking the icon. Check Show Folder to show where the scanned image is saved after scanning. Check Show Save As Window to specify the destination of the scanned image after every scan.

Choose the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter3

59

3

PHOTOCAPTURE (USB only) (Not available for MFC-3360C) 3

These buttons can be used to open or copy files and folders from a media card installed in the machine.

Open PCC Folder (PCC: PhotoCapture Center) 3

The Open PCC Folder button starts Windows Explorer and displays files and folders on the media card.

Copy From PCC 3

The Copy From PCC button lets you copy files on a media card to a folder on your hard disk. To change the destination folder or other settings, right-click the button, click ControlCenter Configuration and choose your preferred settings for file copying.

ControlCenter3

60

3

Setting the Copy Folder 3

Create a new folder based on the PCC files Date or Month The default setting is Date. A folder is created with a name derived from the date the original file was created. The file is then saved into this folder. For example, a file created on the media card on Oct.08, 2006 will be saved into a folder named 08102006.

Retain PCC folder structure when copying The copy is saved using the same folder structure as the original, no new folders are created. If you check Create date folder before copying, a folder based on the current date is created. The copy is then saved into this folder.

Copy To Application 3

The Copy To Application button lets you open files from a specific application after copying to the folder of that application. To change the folder settings, right-click the button and choose your preferred settings for file copying.

Setting the Copy Folder 3

Create a new folder based on the PCC files Date or Month The default setting is Date. A copy folder is created with a name based on the date that the original file was created. The copy is then saved into this folder. For example, the copy of an original file created on Oct.8, 2006 will be saved into a folder named 08102006.

Retain PCC folder structure when copying The copy is saved using the same folder structure as the original, no new folders are created. If you check Create date folder before copying, a folder based on the current date is created. The copy is then saved into this folder.

ControlCenter3

61

3

COPY 3

The Copy1 to Copy4 buttons can be customized let you use advanced copy functions such as N in 1 printing.

To use the Copy buttons, configure the printer driver by right-clicking the button and choosing ControlCenter Configuration.

Enter a name in Please enter a name for the Copy Button text field (up to 30 characters) and choose Copy Ratio.

Choose the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings to be used.

Before finishing the Copy button configuration, set the Printer Name and click the Print Options button to display the printer driver settings.

ControlCenter3

62

3

Note You must configure each of the copy buttons before they can be used.

The Print Options screen will vary depending on the model of printer you have chosen.

ControlCenter3

63

3

PC-FAX (MFC models only) 3

The PC-FAX option lets you send and receive faxes. You can also configure the address book and change some general machine settings.

Send 3

The Send button lets you scan a document and automatically send the image as a fax from the PC using the Brother PC-FAX software. (See PC-FAX sending on page 76.)

To change the Send settings, right-click the Send button and click ControlCenter Configuration. You can change the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter3

64

3

Receive/View Received (Not available for MFC-240C and MFC-3360C) 3

The Brother PC-FAX Receiving software option lets you view and store your faxes on your PC. It is automatically installed when you install the MFL-Pro Suite. By clicking the Receive button, the PC-FAX Receive function is activated and starts to receive fax data from your Brother machine. Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control panel menu of the Brother machine. (See Running the PC-FAX Receiving software on your PC on page 91.) To configure the PC-FAX Receive software, see Setting up your PC on page 91.

When the PC-FAX receiving software is running, you can open the viewer application with the View Received button. (PaperPort SE)

Note You can also activate the PC-FAX receiving software from the start menu. (See Running the PC-FAX Receiving software on your PC on page 91.)

ControlCenter3

65

3

Address Book 3

The Address Book button lets you add, amend or delete contacts from your address book. To edit this button, click the Address Book button to open the dialog box. (See Brother Address Book on page 82.)

Setup 3

By clicking the Setup button, you can configure the user settings of the PC-FAX application.

(See Setting up user information on page 77.)

ControlCenter3

66

3

DEVICE SETTING 3

In the Device Settings option, you can configure the machine settings or check ink levels.

Remote Setup (Not available for DCP models and MFC-240C) 3

The Remote Setup button lets you open the Remote Setup Program window to configure the machine setting menus.

Note For details, see Remote Setup on page 74.

ControlCenter3

67

3

Quick-Dial (Not available for DCP models and MFC-240C) 3

The Quick-Dial button lets you open the Set Quick-Dial window in the Remote Setup Program. You can then easily register or change the Quick-Dial numbers from your PC.

Ink Level 3

The Ink Level button opens the Status Monitor window, which displays the ink level for each cartridge.

Users Guide 3

The Users Guide button lets you view the Software Users Guide and the Network Users Guide in HTML format.

68

4

4

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel (See Control Panel Setup in the Network Users Guide) or by using the BRAdmin Professional software. If you installed the machine following the instructions for a network user in the Quick Setup Guide then the machine should already be configured for your network.

Note For network scanning, a maximum of 25 clients can be connected to one machine on a network. For

example, if 30 clients try to connect at a time, 5 of those clients will not be shown on the LCD.

If your PC is protected by a firewall, and is unable to scan you may need to configure the firewall settings to allow communication through port number 137 and 54925. Visit the Brother Solutions Center (http://solutions.brother.com) for more information.

Before using Network Scanning 4

Network license 4

This product includes a PC license for up to 2 Users.

This license supports the installation of the MFL-Pro Software Suite including ScanSoft PaperPort SE on up to 2 PCs on the network.

If you want to use more than 2 PCs with ScanSoft PaperPort SE installed, please buy the Brother NL-5 pack which is a multiple PC license agreement pack for up to 5 additional users. To buy the NL-5 pack, contact your Brother dealer.

Network Scanning (For models with built-in network support)4

Network Scanning (For models with built-in network support)

69

4

Configuring Network Scanning 4

If you are using a different machine to the one that was originally registered to your PC during the installation of MFL-Pro Suite software (see the Quick Setup Guide), follow the steps below.

a For Windows XP, click the Start button, Control Panel, Printers and Other Hardware, then Scanners and Cameras (or Control Panel, Scanners and Cameras). For Windows 98/Me/2000, click the Start button, Control Panel, then Scanners and Cameras.

b Right-click the Scanner Device icon and choose Properties. The Network Scanner Properties dialog box appears.

c Click the Network Setting tab and choose the appropriate connection method.

Specify your machine by address Enter IP address of the machine in IP Address, and then click Apply.

Network Scanning (For models with built-in network support)

70

4

Specify your machine by name 4

1 Enter the machine node name in Node Name, or click Browse and choose the device you want to use.

2 Click Apply.

d Click the Scan To Button tab and enter your PC name in the Display Name field. The machines LCD displays the name you enter. The default setting is your PC name. You can enter any name that you like.

e If you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and Retype Pin number field. To send data to a PC protected by a PIN number, the LCD prompts you to enter the PIN number before the document can be scanned and sent to the machine. (See Using the Scan key on page 71.)

Network Scanning (For models with built-in network support)

71

4

Using the Scan key 4

Note If you use the Scan key with a USB connection, see Using the Scan key (For USB cable users) on page 34.

Scan to E-mail (PC) 4

When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you designated on your network. The ControlCenter3 software will launch the default E-mail application on the designated PC. You can scan and send a black and white or colour document from the PC as an attachment.

You can change the (Scan) configuration. (See E-mail on page 52.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to E-mail. Press OK.

d Press a or b to choose the destination PC you want to use for E-mailing your document. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Network Scanning (For models with built-in network support)

72

4

Scan to Image 4

When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated on your network. The ControlCenter3 software will launch the default graphics application on the designated PC. You can change the Scan configuration. (See Image (example: Microsoft Paint) on page 49.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to Image. Press OK.

d Press a or b to choose the destination PC you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Scan to OCR 4

When you choose Scan to OCR, your document will be scanned and sent directly to the PC you designated on your network. The ControlCenter3 software will launch the ScanSoft PaperPort with OCR software and convert your document into text that can be viewed and edited from a word processing application on the designated PC. You can change the Scan configuration. (See OCR (Word Processing program) on page 51.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to OCR. Press OK.

d Press a or b to choose the destination PC you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Network Scanning (For models with built-in network support)

73

4

Scan to File 4

When you choose Scan to File, you can scan a black and white or colour document and send it directly to a PC you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter3. You can change the Scan configuration. (See File on page 53.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to File. Press OK.

d Press a or b to choose the destination PC you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Note If you want the scanned data in colour, choose colour in the scan type in the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in the scan type in the Device Button tab of the ControlCenter3 configuration. (See SCAN on page 49.)

74

5

5

Remote Setup 5

The Remote Setup program lets you configure many machine settings from a Windows application. When you start this application, the settings on your machine will be downloaded automatically to your PC and displayed on your PC screen. If you change the settings, you can upload them directly to the machine.

Click the Start button, All Programs, Brother, MFC-XXXX, and Remote Setup.

Note If you are using the MFC-5460CN or MFC-5860CN with a network connection, you will be prompted to

enter a password. The default password is "access".

For other models or if you are connected using USB, no password is required by default.

OK Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK.

Cancel Lets you exit the Remote Setup application without uploading data to the machine.

Apply Lets you upload data to the machine without exiting the Remote Setup application.

Print Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine and then click Print.

Remote Setup (Not available for DCP models and MFC-240C) 5

Remote Setup (Not available for DCP models and MFC-240C)

75

5

Export Lets you save the current configuration settings to a file.

Import Lets you read the settings from a file.

Note You can use the Export and Import buttons to save several sets of settings for your machine.

To save all your settings, highlight MFC-XXXX at the top of the settings list then click Export. To save a single setting or a group of settings, highlight each setting or function heading (for example, to

choose all fax settings highlight Fax) from the setting list then click Export. If you are using a different machine to the one that was originally registered to your PC during the

installation of MFL-Pro Suite (see the Quick Setup Guide), you need to specify the new machine. Open the properties of the Remote Setup Program and choose the new machine. Click the Start button, All Programs, Brother, MFC-XXXX, and Remote Setup.

If your PC is protected by a firewall, and is unable to use Remote Setup, you may need to configure the firewall settings to allow communication through port number 137. Visit the Brother Solutions Center (http://solutions.brother.com) for more information.

76

6

6

Note If you are using Windows XP or Windows 2000 Professional, you must log on with Administrator rights.

PC-FAX sending 6

The Brother PC-FAX feature lets you use your PC to send an application or document file as a standard fax. You can send a file created in any application on your PC as a PC-FAX. You can even attach a cover page. All you have to do is set up the receiving parties as members or groups in your PC-FAX Address Book or simply enter the destination address or fax number into the user interface. You can use the Address Book Search feature to quickly find members to send to. The Brother PC-FAX feature lets you use your PC to send a fax from within your Windows application. The PC-FAX software includes a convenient address book allowing you to quickly find and enter new fax numbers.

For the latest information and updates on the Brother PC-FAX feature, visit http://solutions.brother.com.

Note The PC-FAX software can only send Black & White fax documents.

If your PC is protected by a firewall, and is unable to use PC-FAX send, you may need to configure the firewall settings to allow communication through port number 137. Visit the Brother Solutions Center (http://solutions.brother.com) for more information.

Brother PC-FAX Software (MFC models only) 6

Brother PC-FAX Software (MFC models only)

77

6

Setting up user information 6

Note

You can access User Information from the FAX Sending dialog box by clicking the icon.

(See Sending a file as a PC-FAX using the Facsimile style user interface on page 86.)

a Click the Start button, All Programs, Brother, MFC-XXXX (where XXXX is your model name), PC-FAX sending, then PC-FAX Setup. The Brother PC-FAX Setup dialog box appears:

b Enter this information to create the fax header and cover page.

c Click OK to save the User Information.

Note If you are using Windows 2000 and XP, you can set up the User Information separately for each Windows account.

Brother PC-FAX Software (MFC models only)

78

6

Sending setup 6

From the Brother PC-FAX Setup dialog box, click the Sending tab to display the screen below.

Outside line access Enter a number to access an outside line here. This is sometimes required by local PBX telephone systems (for example, dialling 9 to get an outside line in your office).

Include header To add header information to the top of the fax pages, check Include header. User interface Choose the user interface from two choices: Simple style or Facsimile style.

Simple style 6

Facsimile style 6

Brother PC-FAX Software (MFC models only)

79

6

Setting up a cover page 6

From the PC-FAX dialog box, click the icon to access the PC-Fax Cover Page setup screen.

The Brother PC-FAX Cover Page Setup dialog box appears:

Entering cover page information 6

Note If you are sending a fax to more than one recipient, the recipient information will not be printed on the cover page.

To Choose the sender information you want to add to the cover page.

From Choose the recipient information you want to add to the cover page.

Comment Enter the comment you want to add to the cover page.

Form Choose the cover page format you want to use.

Cover page title You can put a bitmap file, such as your company logo, on the cover page.

Use the browse button to choose the BMP file, and then choose the alignment style.

Count cover page When Count cover page is checked, the cover page will be included in the page numbering. When Count cover page is unchecked, the cover page will not be included.

Brother PC-FAX Software (MFC models only)

80

6

Address Book 6

If Outlook or Outlook Express is installed on your PC, you can choose in the Address Book which address book to use for PC-FAX sending. There are three types: Brother Address Book, Outlook or Outlook Express.

For the address book file, you must enter the path and file name of the database file which contains the address book information.

Click the Browse button to choose the database file.

If you choose Outlook or Outlook Express, you can use the Outlook or Outlook Express Address Book by clicking the Address Book button in the FAX Sending dialog box.

Outlook Express Address Book 6

Note To use your Outlook Address Book, you must select Microsoft Outlook 2000, 2002 or 2003 as your default

e-mail application.

If your Outlook address book is password protected, you must have Outlook running before using the Brother PC-FAX utility. For more information, visit http://solutions.brother.com.

Brother PC-FAX Software (MFC models only)

81

6

Speed Dial setup 6

From the Brother PC-FAX Setup dialog box, click the Speed Dial tab. (To use this feature, you must choose the Facsimile style user interface.)

You can register a member or group on each of the ten Speed Dial buttons.

Registering an address in a Speed Dial button 6

a Click the Speed Dial button you want to program.

b Click the member or group you want to store on the Speed Dial button.

c Click Add >>.

Clearing a Speed Dial button 6

a Click the Speed Dial button you want to clear.

b Click Clear.

Brother PC-FAX Software (MFC models only)

82

6

Brother Address Book 6

a Click the Start button, All Programs, Brother, MFC-XXXX (where XXXX is your model name), PC-FAX sending, then PC-FAX Address Book. The Brother Address Book dialog box appears:

Setting up a member in the Address Book 6

In the Brother Address Book dialog box you can add, edit and delete members and groups.

a In the Address Book dialog box, click the icon to add a member. The Brother Address Book Member Setup dialog box appears:

b In the Member Setup dialog box, enter the members information. Name is a required field. Click OK to save the information.

Brother PC-FAX Software (MFC models only)

83

6

Setting up a group for broadcasting 6

You can create a group to send the same PC-FAX to several recipients at one time.

a In the Brother Address Book dialog box, click the icon to create a Group. The Brother Address Book Group Setup dialog box appears:

b Enter the name of the new group in the Group Name field.

c In the Available Names box, choose each member to be included in the group, and then click Add >>. Members added to the group appear in the Group Members box.

d After all the members you want have been added, click OK.

Note You can have up to 50 members in a group.

Editing member information 6

a Choose the member or group you want to edit.

b Click the edit icon.

c Change the member or group information.

d Click OK.

Deleting a member or group 6

a Choose the member or group you want to delete.

b Click the delete icon.

c When the confirmation dialog box appears, click OK.

Brother PC-FAX Software (MFC models only)

84

6

Exporting the Address Book 6

You can export the whole Address Book to an ASCII text file (*.csv). You can also choose and create a Vcard that can be attached to a members outgoing E-mail. (A Vcard is an electronic business card that contains the senders contact information.)

Exporting the whole current Address Book 6

Note If you are creating a Vcard, you must first choose the member.

If you choose Vcard in a, Save as type: will be Vcard (*.vcf).

a Do one of the following: From the Address Book, click File, Export, then Text. Click Vcard and go to e.

b From the Available Items column, choose the data fields you want to export and then click Add >>.

Note Choose the items in the order you want them listed.

c If you are exporting to an ASCII file, choose Tab or Comma from Divide Character. This chooses Tab or Comma to separate the data fields.

d Click OK to save the data.

e Enter the name of the file, and then click Save.

Brother PC-FAX Software (MFC models only)

85

6

Importing to the Address Book 6

You can import ASCII text files (*.csv) or Vcards (electronic business cards) into your Address Book.

Importing an ASCII text file 6

a Do one of the following: From the Address Book, click File, Import, then Text. Click Vcard and go to e.

b From the Available Items column choose the data fields you want to import, and click Add >>.

Note From the Available Items list choose the fields in the same order they are listed in the import text file.

c Choose Tab or Comma based on the file format you are importing from Divide Character.

d Click OK to import the data.

e Enter the name of the file, and then click Open.

Note If you chose a text file in a, Files of type: will be Text file (*.csv).

Brother PC-FAX Software (MFC models only)

86

6

Sending a file as a PC-FAX using the Facsimile style user interface 6

a Create a file in any application on your PC.

b Click File, then Print. The Print dialog box appears:

c Choose Brother PC-FAX as your printer, and then click Print. The Facsimile style user interface appears:

Note If the Simple style user interface appears, change the user interface selection setting. (See Sending setup on page 78.)

d Enter a fax number using any of the following methods: Use the dial pad to enter the number. Click any of the 10 Speed-Dial buttons. Click the Address Book button, and then choose a member or group from the Address Book.

If you make a mistake, click Clear to delete all the entries.

e To include a cover page, click Cover Page On.

Note

You can also click the cover page icon to create or edit a cover page.

Brother PC-FAX Software (MFC models only)

87

6

f Click Start to send the fax.

Note If you want to cancel the fax, click Stop.

If you want to redial a number, click Redial to scroll through the last five fax numbers, choose a number, and then click Start.

Sending a file as a PC-FAX using the Simple style user interface 6

a Create a file in any application on your PC.

b Click File, then Print. The Print dialog box appears:

c Choose Brother PC-FAX as your printer, and then click Print. The Simple style user interface appears:

Note If the Facsimile style user interface appears, change the user interface selection setting. (See Sending setup on page 78.)

d Enter the fax number using any of the following methods: Enter the fax number in the To: field. Click the To: button, and then choose destination fax numbers from the Address Book.

If you make a mistake, click Clear to delete all the entries.

Brother PC-FAX Software (MFC models only)

88

6

e To send a cover page and note, check Cover Page On.

Note

You can also click the icon to create or edit a cover page.

f Click the send icon.

Note

If you want to cancel the fax, click the cancel icon.

Brother PC-FAX Software (MFC models only)

89

6

PC-FAX receiving (Not available for MFC-240C and MFC-3360C) 6

Note For Windows 2000, XP and XP Professional x64 Edition users, you must log on with Administrator rights

to use PC-FAX receiving. If your PC is protected by a firewall, and is unable to use PC-FAX receive, you may need to configure the

firewall settings to allow communication through port number 137 and 54926. Visit the Brother Solutions Center (http://solutions.brother.com) for more information. Depending on the operating system you are using, you may get a Security Alert message when you start the PC-FAX receiving feature. To enable PC-FAX receiving, you must unblock the program.

The Brother PC-FAX Receive Software lets you view and store faxes on your PC. It is automatically installed when you install the MFL-Pro Suite and works on locally or network connected machines. When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will automatically be sent to your PC. If you turn your PC off, your machine will continue to receive and store your faxes in its memory. The machine LCD will display the number of stored faxes received, for example: PC-Fax Msgs:001

When you switch your PC on, the PC-FAX Receive Software automatically transfers your faxes to your PC. To enable the PC-FAX Receive Software, do the following:

Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on the machine. Run the Brother PC-FAX Receive software on your PC. (We recommend select the Add to Startup folder check box, so that the software automatically runs and can transfer any faxes on PC startup.)

Brother PC-FAX Software (MFC models only)

90

6

Enabling the PC-FAX Receiving software on your machine 6

You can optionally enable the Backup Print option. When enabled, the machine will print a copy of the fax before the fax is sent to the PC or the PC is switched off.

(For MFC-5460CN and MFC-5860CN)

a Press Menu, 2, 5, 1.

b Press a or b to choose PC Fax Receive. Press OK.

c Press a or b to choose USB or your PC name if connected on a network. Press OK.

d Press a or b to choose Backup Print:On or Backup Print:Off. Press OK.

e Press Stop/Exit. (For other models)

a Press Menu.

b Press a or b to choose Fax, Advanced Fax Operation, Forward/Store and PC Fax Receive. Press OK.

c Press a or b to choose USB or your PC name if connected on a network. Press OK.

d Press a or b to choose Backup Print:On or Backup Print:Off. Press OK.

e Press Stop/Exit.

Note If you select Backup Print:On, the machine will print the fax, so you will have a copy if there is a power failure before it is sent to the PC. The fax messages are automatically erased from your machines memory when they have been successfully printed and sent to your PC. When Backup Print is off, your fax messages are automatically erased from your machines memory when they have been successfully sent to your PC.

Brother PC-FAX Software (MFC models only)

91

6

Running the PC-FAX Receiving software on your PC 6

Click the Start button, All Programs, Brother, MFC-XXXX, PC-FAX Receiving and Receive.

The PC-FAX icon appears in your PC tasktray.

Setting up your PC 6

a Right-click the PC-FAX icon on your PC tasktray, and then click PC-Fax RX Setup. The PC-Fax RX Setup dialog box appears:

b In Save file to, click the Browse button if you want to change the path where PC-FAX files are saved.

c In File Format, choose .tif or .max as the received document format. The default format is .tif.

d To play wave files (.wav sound files) when receiving a fax, check Play wave file when receiving FAX, and enter the path of the wave file.

e To automatically start the PC-FAX receiving software when you start Windows, check Add to Startup folder.

f If you want to use the PC-FAX Receiving software, see Configuring the Network PC-FAX Receiving Settings on page 92.

Brother PC-FAX Software (MFC models only)

92

6

Configuring the Network PC-FAX Receiving Settings 6

The settings to send received faxes to your computer were automatically configured during the installation of MFL-Pro Suite (See the Quick Setup Guide). If you are using a different machine to the one that was registered to your PC during the installation of the MFL-Pro Suite software, follow the steps below.

a In the PC-FAX RX Setup dialogue box, click the Network Settings button. The Network Settings dialog box appears.

b You must specify the IP address or name of your machine. Choose the appropriate connection method.

Specify your machine by address Enter the IP address of the machine in IP Address.

Specify your machine by name Enter the machine node name in Node Name, or click the Browse button and choose the correct Brother machine you want to use from the list.

Specify your PC name You can specify the PC name that will appear on the display of the machine. To change the name, enter the new name in Display Your PC Name.

Brother PC-FAX Software (MFC models only)

93

6

Viewing new PC-FAX messages 6

Each time your PC is receiving a PC-FAX, the icon will alternate between and . Once the fax has

been received, the icon will change to . The icon will change to once the received fax has

been viewed.

a Run PaperPort.

b Open the Fax Received folder.

c Double-click any new faxes to open and view them.

Note The name title of your unread PC message will be based on the date and time that the messages were received until you assign a file name. For example Fax 2-20-2006 16:40:21.tif.

94

7

7

CAUTION

DO NOT start your PC with a media card installed in the media drive of the machine. You could lose your data or damage the card.

Note The PhotoCapture Center will read only the card that was put in first.

While the machine is printing from the PhotoCapture Center, your PC cannot access the PhotoCapture Center for any other operation.

For USB cable users 7

Note For Windows 2000 users, to access the PhotoCapture Center features from your PC, you must first install a Windows 2000 update. See the Quick Setup Guide for installation instructions.

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

b In Windows Explorer, click the Removable Disk icon 1. The files and folders on the media card appear on your PC screen. You can edit a file and save it to another drive on your PC.

1 If you are using Windows XP and you create a name for the volume label of the media card, this name appears instead of Removable Disk.

PhotoCapture Center (Not available for MFC-3360C) 7

PhotoCapture Center (Not available for MFC-3360C)

95

7

When you take out a media card, do the following to prevent damage to the media card: 7

a In Windows Explorer, right-click the removable disk icon and choose Eject.

b Wait until the (PhotoCapture) key stops blinking before taking out the media card.

CAUTION

DO NOT unplug the power cord, USB cable or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the

card (when the (PhotoCapture) key is flashing). You could lose your data or damage the card.

If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once before putting the same media card back into the machine. If you do not restart your PC, the data on your media card may be destroyed.

PhotoCapture Center (Not available for MFC-3360C)

96

7

For Network users (For models with built-in network support) 7

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

b Double-click the Network PhotoCapture Center icon.

Your browser software appears and a list of file names on your media card is shown.

Note Your browser software accesses the media card using the FTP protocol and the network Host Name of the machine. You can also access the media card by entering ftp://XXX.XXX.XXX.XXX (where XXX.XXX.XXX.XXX is the IP address of your Brother machine) from your web browser.

c Click the name of the file you want to see.

When you take out a media card, do the following to prevent damage to the media card: 7

a Close the browser.

b Wait until the (PhotoCapture) key stops blinking before taking out the media card.

CAUTION

DO NOT unplug the power cord or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the card

(when the (PhotoCapture) key is flashing). You could lose your data or damage the card.

If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once before putting the same media card back into the machine. If you do not restart your PC, the data on your media card may be destroyed.

Section II

Apple Macintosh II

Printing and Faxing 98 Scanning 107 ControlCenter2 122 Network Scanning (For models with built-in network support) 138 Remote Setup & PhotoCapture Center 143

98

8

8

Note The screens shown in this section are from Mac OS X 10.2.4. Screens on your Macintosh may vary depending on your operating system.

Setting up your USB-equipped Apple Macintosh 8

Note Before you can connect the machine to your Macintosh, you must buy a USB cable that is no longer than 2 metres (6 feet).

Improper Setup

DO NOT connect the machine to a USB port on a keyboard or a non-powered USB hub.

Simultaneous printing, scanning and faxing 8

Your machine can print from your Macintosh while sending or receiving a fax in memory, or while scanning a document into the Macintosh. Fax sending will not be stopped during Macintosh printing.

However, when the machine is copying or receiving a fax on paper, it pauses the Macintosh printing operation, and then continues printing when copying or fax receiving has finished.

Clearing data from the memory 8

If the LCD shows Data Remaining, you can clear the data that is left in the printer memory by pressing Stop/Exit.

Checking the print quality 8

If you want to check the print quality and find out how to improve it, see Improving print quality in the Users Guide.

Printing and Faxing 8

Printing and Faxing

99

8

Status Monitor 8

The Status Monitor utility is a configurable software tool for monitoring the status of the machine, letting you see error messages such as paper empty, paper jam or ink empty at pre-set update intervals. Before you can use the tool you must choose your machine in the Model pop-up menu in ControlCenter2.

You can check the device status by clicking the Ink Level icon in the DEVICE SETTINGS tab of ControlCenter2 or by choosing Brother Status Monitor located in Macintosh HD /Library/Printers/ Brother/Utilities.

Updating the machines status

If you want the latest machine status while the Status Monitor window is open, click the update button (1).

You can set at what interval the software will update the machine status information. Go to the menu bar, Brother Status Monitor and choose Preferences.

Hiding or showing the window

After starting the Status Monitor, you can hide or show the window. To hide the window, go to the menu bar, Brother Status Monitor and choose Hide Brother Status Monitor. To show the window, click the Status Monitor icon in the dock or click the Ink Level button in the DEVICE SETTINGS tab of ControlCenter2.

Quitting the window

Go to the menu bar and choose Quit.

Note For network users, a Status Monitor Widget for Mac OS X 10.4 or greater is also available as a download from http://solutions.brother.com.

1

Printing and Faxing

100

8

Using the Brother Ink driver 8

Choosing page setup options 8

a From an application such as Apple TextEdit, click File, then Page Setup. Make sure MFC-XXXX (where XXXX is your model name) is chosen in the Format for pop-up menu. You can change the settings for Paper Size, Orientation and Scale, then click OK.

b From an application such as Apple TextEdit, click File, then Print to start printing.

Borderless printing 8

From the Paper Size pop-up menu, choose the size of paper you want to print such as A4 (borderless).

Printing and Faxing

101

8

Choosing printing options 8

To control special printing features, choose Print Settings in the Print dialog box. You can choose the Quality, Slow Drying Paper, Media Type, Color/Grayscale, Paper Thickness, Paper Feed (MFC-5860CN only), Bi-Directional Printing and Mirror Print settings.

Note Check Slow Drying Paper when printing with plain paper on which ink dries slowly. This setting may

cause some slight blurring of text.

See Resolution in Specifications in the Users Guide.

Media Type 8

For the best print results, choose the print media in the driver. The machine changes the way it prints, depending on the media type.

Plain Paper Inkjet Paper Brother Premium Glossy Photo Paper Other Photo Paper Transparencies

Printing and Faxing

102

8

Quality 8

The quality selection lets you choose the print resolution you want for your document. Print quality and speed are related. The higher the quality, the longer it will take to print the document. The quality selections that are available will vary depending on the media type you choose.

Highest Up to 1200 6000 dpi. (See Resolution in Specifications of the Users Guide.) Use for printing precise images such as photographs. This is the highest resolution and slowest speed.

Photo Up to 1200 2400 dpi. Use for printing photographs. Since the print data is much larger than a normal document, the processing time, data transfer time and print time will be longer.

Fine 1200 1200 dpi. Better print quality than Normal mode and faster print speed than Photo.

Normal 600 600 dpi. Good print quality with typical print speed.

Fast Normal 600 300 dpi. Faster print speed than Normal. Fast 600 150 dpi. The fastest print mode and the lowest amount of ink used. Use for printing large volume documents or documents for proofing.

Note The default settings are shown in bold.

For DCP-130C and MFC-240C, the Highest Print Quality selection is not available if you choose borderless printing.

Media Type Colour/Greyscale Print Quality Selection Plain Paper Colour/Greyscale Fast, Fast Normal, Normal, Fine Inkjet Paper Colour/Greyscale Fine, Photo Brother Premium Glossy Photo Paper or Other Photo Paper

Colour/Greyscale Fine, Photo, Highest

Transparencies Colour/Greyscale Normal, Fine

Printing and Faxing

103

8

Paper Feed (MFC-5860CN only) 8

The Paper Feed selection sets the paper tray from which the machine will feed the paper when printing. If you choose Auto Select, the machine will take paper from Tray 1. When Tray 1 is empty, Auto Select allows the machine to take paper from Tray 2 if both trays are using paper that is the same type and size.

Note You can only use Plain Paper for Media Type, and Letter, Legal, A4, Executive or B5 for Paper Size in

Tray 2.

Tray 2 does not support Borderless printing.

Printing and Faxing

104

8

Sending a fax (MFC models only) 8

You can send a fax directly from a Macintosh application.

a Create a document in a Macintosh application.

b Click File, then Print. The Printer dialog box appears:

c Choose Send Fax from the pop-up menu.

d Choose Facsimile from the Output pop-up menu.

Printing and Faxing

105

8

e Enter a fax number in the Input Fax Number box, and then click Print to send the fax.

Note If you want to send a fax to more than one number, click Add after entering the first fax number. The destination fax numbers will be listed in the dialog box.

Drag a vCard from the Mac OS X Address Book application

You can address a fax number using a vCard (an electronic business card) from the Mac OS X Address Book application.

a Click Address Book.

b Drag a vCard from the Mac OS X Address Book application to the Destination Fax Numbers field.

Printing and Faxing

106

8

Note If both work and home fax numbers are stored in the Mac OS X Address Book, choose work fax or home fax from the Stored Fax Numbers pop-up menu, and then drag a vCard.

c When you are finished addressing your fax, click Print.

Note The vCard used must contain a work fax or home fax number.

107

9

9

Scanning from a Macintosh 9

The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use this Macintosh TWAIN Scanner driver with any applications that support TWAIN specifications.

Note If you want to scan from a machine on a network, choose the networked machine in the DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model pop-up menu of ControlCenter2.

Accessing the scanner 9

Run your Macintosh TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it as the default driver by choosing Select Source (or another menu name for choosing the default driver). For each document you scan after this, choose Acquire Image Data or Start. The scanner setup dialog box appears.

Note The method of choosing the default driver or scanning a document may vary depending on the application you are using.

Scanning 9

Scanning

108

9

Scanning an image into your Macintosh 9

You can scan a whole page, or a portion by pre-scanning the document.

Scanning a whole page 9

a Load your document in the ADF.

Note If your model is a flatbed type, you can also put your document on the scanner glass.

b Adjust the following settings, if needed, in the Scanner Setup dialog box: Resolution Scan Type Scanning Area Document Size Brightness Contrast

c Click Start. When scanning has finished, the image appears in your graphics application.

Pre-Scanning an image 9

The PreScan button is used to preview and also lets you crop any unwanted areas from the image. When you are satisfied you are scanning the correct area, click the Start button in the Scanner Setup dialog box to scan the image.

a Load your document.

b Click PreScan. The whole image is scanned into your Macintosh and appears in the Scanning Area.

c Drag the mouse pointer over the portion you want to scan.

d Put the document in the ADF again.

Note If your model is a flatbed type, and you put the document on the scanner glass in a, skip this step.

Scanning

109

9

e Adjust the settings for Resolution, Scan Type (Greyscale), Brightness, Contrast, and Size in the Scanner Setup dialog box as needed.

f Click Start. This time only the chosen area of the document appears in the application window.

g You can refine the image in your editing software.

Settings in the Scanner window 9

Resolution 9

You can change the scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colours.

Resolution Black & White/ Gray (Error Diffusion)

8 bit color True Gray/24 bit color

100 100 dpi Yes Yes Yes 150 150 dpi Yes Yes Yes 200 200 dpi Yes Yes Yes 300 300 dpi Yes Yes Yes 400 400 dpi Yes Yes Yes 600 600 dpi Yes Yes Yes 1200 1200 dpi Yes No Yes 2400 2400 dpi Yes No Yes 4800 4800 dpi Yes No Yes 9600 9600 dpi Yes No Yes 19200 19200 dpi Yes No Yes

Scanning

110

9

Scan Type 9

Black & White Use for text or line art images.

Gray (Error Diffusion) Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray images without using true gray dots. Black dots are put in a specific pattern to give the gray appearance.)

True Gray Use for photographic images or graphics. This mode is more exact because it uses up to 256 shades of gray.

8 Bit Color Uses up to 256 colours to scan the image.

24 Bit Color Uses up to 16.8 million colours to scan the image.

Although using 24 Bit Color creates an image with the most accurate colour reproduction, the image file size will be about three times larger than a file created using the 8 Bit Color option. It requires the most memory and has the longest transfer time.

Scanning

111

9

Scanning Area 9

Choose one of the following sizes:

A4 210 297 mm

B5 182 257 mm

Letter 8.5 11 in.

Legal 8.5 14 in.

A5 148 210 mm

Executive 7.25 10.5 in.

Business Card

To scan business cards, choose the Business Card size (90 60 mm), and then put the business card face down at the center of the scanner glass.

Photo 4 6 in.

Index Card 5 8 in.

Photo L 89 127 mm

Photo 2L 127 178 mm

Post Card 1 100 148 mm

Post Card 2 148 200 mm

Custom (User adjustable from 0.35 0.35 in. to 8.5 14 in. or 8.9 8.9 mm to 215 355 mm.)

After you choose a custom size, you can adjust the scanning area. Click and hold the mouse button as you drag the mouse to crop the image.

Width: Enter the width of the custom size.

Height: Enter the height of the custom size.

Scanning

112

9

Adjusting the Image 9

Brightness Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average, and is usually suitable for most images.

You can set the Brightness level by dragging the slide bar to the right or left to lighten or darken the image. You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again.

If the image is too dark, set a higher Brightness level and scan the document again.

Note The Brightness setting is only available if you have set Scan Type to Black & White, Gray or True Gray.

Contrast You can increase or decrease the contrast level by moving the slide bar to the left or right. An increase emphasizes dark and light areas of the image, while a decrease reveals more detail in gray areas. You can also enter a value in the box to set the Contrast.

Note The Contrast setting is only available if you have set Scan Type to Gray or True Gray.

When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits your needs.

Scanning

113

9

Using the Scan key (For USB cable users) 9

Note If you use the Scan key on a network, see Using the Scan key on page 140.

You can use the (Scan) key on the control panel to scan documents directly into your word processing, graphics or E-mail applications or to a folder on your Macintosh.

Before you can use the (Scan) key on the control panel, you have to install the Brother MFL-Pro Software Suite and connect the machine to your Macintosh. If you installed the MFL-Pro Suite from the included CD-ROM, then the correct drivers and ControlCenter2 are installed. Scanning by the (Scan) key follows the configuration in the Device Button tab. (See SCAN on page 125.) For details about how to configure the ControlCenter2 buttons to launch the application of your choice using the (Scan) key, see Using ControlCenter2 on page 122.

Scan to E-mail 9

You can scan either a black and white or colour document into your E-mail application as a file attachment. You can change the (Scan) configuration. (See E-mail on page 128.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to E-mail. Press OK.

d Press Mono Start or Colour Start. The machine starts scanning the document, creates a file attachment, and launches your E-mail application, displaying the new message waiting to be addressed.

Scanning

114

9

Scan to Image 9

You can scan a colour picture into your graphics application for viewing and editing. You can change the (Scan) configuration. (See Image (example: Apple PreView) on page 125.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to Image. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Scan to OCR 9

If your document is text, you can have it converted by Presto! PageManager to an editable text file and then have the result displayed in your word processing application for viewing and editing. You can change the (Scan) configuration. (See OCR (word processing application) on page 127.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to OCR. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Note You must have Presto! PageManager installed on your Macintosh for the OCR feature to work from the Scan key or ControlCenter2. (See Using Presto! PageManager on page 119.)

Scanning

115

9

Scan to File 9

You can scan a black and white or a colour document into your Macintosh and save it as a file in the folder you choose. The file type and specific folder are based on the settings you have chosen in the Scan to File screen of the Brother MFL-Pro ControlCenter2. (See File on page 129.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to File. Press OK.

d Press Mono Start or Colour Start. The machine starts the scanning process.

Note If you want the scanned data in colour, choose colour in the scan type in the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type in the Device Button tab of the ControlCenter2 configuration. (See File on page 129.)

Scan to Card (Not available for MFC-240C and MFC-3360C) 9

You can scan black and white and colour documents directly to a media card. Black and white documents will be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. File names are based on the current date. For example, the fifth image scanned on July 1, 2006 would be named 01070605.PDF. You can change the colour, quality and file name.

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

Resolution (For Monochrome Display models)

Resolution (For Colour Display models)

File Format Options Default File Format

B/W 200x100 dpi 200x100dpi B/W TIFF / PDF TIFF B/W 200 dpi 200dpi B/W TIFF / PDF TIFF Color 150 dpi 150dpi Color JPEG / PDF PDF Color 300 dpi 300dpi Color JPEG / PDF PDF Color 600 dpi 600dpi Color JPEG / PDF PDF

Scanning

116

9

CAUTION

DO NOT unplug the power cord or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the card (the PhotoCapture key is flashing). You could lose your data or damage the card. If you take out the media card while the PhotoCapture key is flashing, you must restart your PC at once before putting the media card back in. If you put in another media card before the PC is restarted, the data on it may be destroyed.

b Load your document.

c Press the (Scan) key.

d Press a or b to choose Scan to Card. Press OK. Do one of the following:

To change the quality, go to e. To start scanning without changing any settings, press Mono Start or Colour Start.

e Press a or b to choose the quality you want. Press OK. Do one of the following:

To change the file type, go to f. To start scanning without changing any settings, press Mono Start or Colour Start.

f Press a or b to choose the file type you want. Press OK. Do one of the following:

To change the file name, go to g. To start scanning without changing any settings, press Mono Start or Colour Start.

Note If you choose colour in the resolution setting, you cannot choose TIFF. If you choose monochrome in the resolution setting, you cannot choose JPEG.

g The file name is set automatically. However, you can create a name of your choice using the dial pad. You can only change the first 6 digits of the file name. (MFC models only) Press OK.

Note Press Stop/Exit or Clear/Back to delete the letters you entered.

h Press Mono Start or Colour Start to start scanning.

Scanning

117

9

Changing the default quality 9

(For MFC-5460CN and 5860CN) 9

a Press Menu, 4, 9, 1.

b Press a or b to choose B/W 200x100 dpi, B/W 200 dpi, Color 150 dpi, Color 300 dpi or Color 600 dpi. Press OK.

c Press Stop/Exit.

(For DCP-130C) 9

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 1.Quality. Press OK.

e Press a or b to choose B/W 200x100 dpi, B/W 200 dpi, Color 150 dpi, Color 300 dpi or Color 600 dpi. Press OK.

f Press Stop/Exit.

Changing the default black & white file format 9

(For MFC-5460CN and 5860CN) 9

a Press Menu, 4, 9, 2.

b Press a or b to choose TIFF or PDF. Press OK.

c Press Stop/Exit.

(For DCP-130C) 9

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 2.B/W File Type. Press OK.

e Press a or b to choose TIFF or PDF. Press OK.

f Press Stop/Exit.

Scanning

118

9

Changing the default colour file format 9

(For MFC-5460CN and 5860CN) 9

a Press Menu, 4, 9, 3.

b Press a or b to choose PDF or JPEG. Press OK.

c Press Stop/Exit.

(For DCP-130C) 9

a Press Menu.

b Press a or b to choose 2.PhotoCapture. Press OK.

c Press a or b to choose 0.Scan to Card. Press OK.

d Press a or b to choose 3.ColorFile Type. Press OK.

e Press a or b to choose PDF or JPEG. Press OK.

f Press Stop/Exit.

Scanning

119

9

Using Presto! PageManager 9

Presto! PageManager is an application for managing the documents in your Macintosh. Since it is compatible with most image editors and word processing programs, Presto! PageManager gives you unmatched control over your Macintosh files. You can easily manage your documents, edit your E-mail and files and read documents with the OCR software built into Presto! PageManager.

If you use the machine as a scanner, we recommend that you install Presto! PageManager. To install Presto! PageManager, see the Quick Setup Guide.

Note The complete NewSoft Presto! PageManager 7 Users Guide can be viewed from the Help icon in NewSoft Presto! PageManager 7.

Features 9

OCR: In one step you can scan an image, recognize the text, and edit it with a word processor.

Image Editing: Enhance, crop and rotate images, or open them with an image-editing program of your choice.

Annotation: Add removable notes, stamps and drawings to images.

Treeview Window: View and arrange your folder hierarchy for easy access.

Thumbnail Window: View files as thumbnails for easy identification.

System requirements for Presto! PageManager 9

PowerPC processor

System 10.2.4 or greater

CD-ROM drive

Hard disk drive with at least 120 MB of free disk space

Recommended: 8-bit Colour or higher video adapter

Eudora Mail, or Outlook Express electronic mail software

Scanning

120

9

Technical support 9

For USA

Company name: Newsoft America Inc. Postal Address: 4113 Clipper Court Fremont CA 94538, USA Telephone: 510-4458600 Fax: 510-4458601 E-mail Address: contactus@newsoftinc.com URL: http://www.newsoft.com

For Canada

E-mail Address: contactus@newsoftinc.com

Germany

Company name: NewSoft Europe Postal Address: Regus Center Fleethof Stadthausbrucke 3 20355 Hamburg, Germany Telephone: 49-40-37644530 Fax: 49-40-37644500 E-mail Address: contact@newsoft.eu.com URL: http://de.newsoft.eu.com Company name: SoftBay GmbH Postal Address: Carlstrase 50 D-52531 Ubach-Palenberg Telephone: 49(0)2451/9112647 Fax: 49(0)2451/409642 E-mail Address: newsoft@softbay.de URL: http://de.newsoft.eu.com

UK

Company name: Guildsoft Ltd Postal Address: Not Open Telephone: 44-01752-201148 Fax: 44-01752-894833 E-mail Address: Tech@guildsoft.co.uk URL: http://uk.newsoft.eu.com

Scanning

121

9

France

Company name: Partners in Europe Postal Address: Unit 14, Distribution Centre, Shannon Ind. Est Shannon, Co. Clare, Ireland Telephone: 0800-917171 E-mail Address: Newsoft@pie.ie

Italy

Company name: V.I.P Postal Address: Not Open Telephone: 166821700 Fax: 532786999 E-mail Address: supporto@gensoftonline.com

Spain

Company name: Atlantic Devices Postal Address: Caputxins, 58, 08700 Igualada Telephone: 938040702-33 Fax: 938054057 E-mail Address: support@atlanticdevices.com

Other countries

E-mail Address: tech@newsoft.eu.com

122

10

10

Note The features available to you in ControlCenter2 may vary depending on the model number of your machine.

Using ControlCenter2 10

ControlCenter2 is a software utility that lets you quickly and easily access your frequently used applications. Using ControlCenter2 eliminates the need to manually launch specific applications. The icon will appear on

the menu bar. To open the ControlCenter2 window, click the icon and choose Open. ControlCenter2 has the following operations:

a Scan directly to a file, E-mail, word processor or graphics application of your choice. (1)

b Custom Scan buttons let you configure a button to meet your own application needs. (2)

c Access the Copy features available via your Macintosh. (3)

d Access the settings available to configure your device. (4)

e You can choose which machine ControlCenter2 will connect with from the Model pop-up menu. (5) You can also open the DeviceSelector window by choosing Other... from the Model pop-up menu.

f You can also open the configuration window for each function by clicking the Configuration button. (6)

ControlCenter2 10

5

1

6

2 3 4

ControlCenter2

123

10

Turning the AutoLoad feature off 10

If you do not want ControlCenter2 to run automatically each time you start your Macintosh, do the following.

a Click the ControlCenter2 icon in the menu bar and choose Preferences. The ControlCenter2 preference window appears.

b Uncheck Start ControlCenter on computer startup.

c Click OK to close the window.

Note The ControlCenter2 application icon is in Macintosh HD/Library/Printers/Brother/Utilities/ControlCenter.

SCAN 10

There are four scan buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File applications.

Image (Default: Apple PreView)

Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination application, such as Adobe PhotoShop or any kind of image editing application on your Macintosh.

OCR (Default: Apple Text Edit)

Lets you scan a page or document, automatically run the OCR application and put text (not a graphic image) into a word processing application. You can choose the target word processing application, such as Microsoft Word or any word processing application on your Macintosh. You must have Presto! PageManager installed on your Macintosh.

E-mail (Default: your default E-mail software)

Lets you scan a page or document directly into an E-mail application as a standard attachment. You can choose the file type and resolution for the attachment.

File Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.

ControlCenter2

124

10

ControlCenter2 gives you the ability to configure the hardware Scan key on your machine and the ControlCenter2 Software button for each scan feature. To configure the hardware Scan key on your machine choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure the Software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of the SCAN buttons.

CUSTOM SCAN 10

You can configure the button name and settings for each of these buttons to meet your specific needs by clicking a button while holding down the Ctrl key and following the configuration menus.

COPY / PC-FAX 10

COPY - Lets you use your Macintosh and any printer driver for enhanced copy operations. You can scan a page on the machine and print the copies using any of the features of the machines printer driver, or you can direct the copy output to any standard printer driver installed on your Macintosh including network printers.

PC-FAX - Lets you scan a page or document and automatically send the image as a fax from the Macintosh. (Not available for DCP models.)

You can configure your preferred settings on up to four buttons.

DEVICE SETTINGS 10

You can configure the machine settings or check ink levels.

Remote Setup Lets you open the Remote Setup Program. (Remote Setup (Not available for DCP models and MFC-240C) on page 143.)

Quick-Dial Lets you open the Set Quick-Dial window of the Remote Setup. (Remote Setup (Not available for DCP models and MFC-240C) on page 143.)

Ink Level Lets you open the Brother Status Monitor, which displays the ink level for each cartridge.

ControlCenter2

125

10

SCAN 10

There are four buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File applications.

Note You can configure your machines Scan key for each ControlCenter2 button in the Device Button tab.

Image (example: Apple PreView) 10

The Scan to Image feature lets you scan an image directly into your graphics application for image editing. To change the default settings, click the Scan to Image button while holding down the Ctrl key and choose Software Button.

ControlCenter2

126

10

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

Change the other settings, if needed.

To change the destination application, click the Target Application pop-up menu and choose your preferred application. You can add an application to the lists by clicking the Add button.

Enter the Application Name (up to 30 characters) and choose your preferred application by clicking the Browse button. Also choose the File Type from the pop-up menu.

You can delete an application that you have added. Just choose the Application Name and click the Delete button.

Note This function is also available for Scan to E-mail and Scan to OCR. The window may vary depending on the function.

ControlCenter2

127

10

OCR (word processing application) 10

Scan to OCR converts the graphic page image data into text which can be edited by any word processing application. You can change the default word processing application.

To configure, click the Scan to OCR button while holding down the Ctrl key and choose Software Button.

To change the word processing application, choose the destination word processing application from the Target Application pop-up menu. You can add an application to the list by clicking the Add button. To delete an application, click the Delete button.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

ControlCenter2

128

10

E-mail 10

The Scan to E-mail feature lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment. To change the default E-mail application or attachment file type, click the Scan to E-mail button while holding down the Ctrl key and choose Software Button.

To change the E-mail application, choose your preferred E-mail application from the E-mail Application pop-up menu. You can add an application to the lists by clicking the Add button 1. To delete an application, click the Delete button. 1 When you first start ControlCenter2 a default list of compatible E-mail applications will appear in the pop-up menu. If you are having trouble using

a custom application with ControlCenter2 you should choose an application from the list.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

Supported file types 10

You can choose from the following list of file types for attachments or for saving to a folder.

Choose from the pop-up menu the type of file you want the scanned images to be saved in.

Windows Bitmap (*.bmp)

JPEG (*.jpg)

TIFF - Uncompressed (*.tif)

TIFF - Compressed (*.tif)

TIFF Multi-Page - Uncompressed (*.tif)

TIFF Multi-Page - Compressed (*.tif)

Portable Network Graphics (*.png)

PDF (*.pdf)

ControlCenter2

129

10

File 10

The Scan to File button lets you scan an image to a folder on your hard disk in any file format. This lets you easily archive your paper documents. To configure the file type and folder, click the Scan to File button while holding down the Ctrl key and choose Software Button.

Choose the file type for the saved image from the File Type pop-up menu. You can save the file to the default folder, or choose your preferred folder by clicking the Browse button.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

Note For supported file types, see Supported file types on page 128.

ControlCenter2

130

10

CUSTOM SCAN 10

There are four buttons which you can configure to fit your scanning needs.

To customize a button, click the Custom button while holding down the Ctrl key, and the configuration window appears. There are four scan functions: Scan to Image, Scan to OCR, Scan to E-mail and Scan to File.

Scan to Image Lets you scan a page directly into any image viewer/editor software. You can choose any image editor application on your Macintosh as a destination.

Scan to OCR Converts scanned documents into editable text files. You can choose the destination application for the editable text. You must install Presto! PageManager for this feature.

Scan to E-mail Attaches the scanned images to an E-mail message. You can choose any E-mail application on your Macintosh. You can also choose the file attachment type and create a quick send list of E-mail addresses chosen from your E-mail address book.

Scan to File Lets you save a scanned image to any folder on a local or network hard disk. You can also choose the file type to be used.

User-defined button 10

To customize a button, click the Custom button while holding down the Ctrl key, and the configuration window appears. Follow these guidelines for button configuration.

ControlCenter2

131

10

Scan to Image 10

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the Target Application, File Type, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter2

132

10

Scan to OCR 10

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the Target Application, File Type, OCR Software, OCR Language, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter2

133

10

Scan to E-mail 10

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the E-mail Application, File Type, Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter2

134

10

Scan to File 10

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the file format from the File Type pop-up menu. Save the file to the default folder or choose your preferred folder by clicking the Browse button.

Choose the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings.

If you want to specify the destination of the scanned image, check Show Save As Window.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

ControlCenter2

135

10

COPY / PC-FAX (PC-FAX is not available for DCP models) 10

The Copy1-Copy4 buttons can be customized to let you use advanced copy and fax functions such as N in 1 printing.

To use the Copy buttons, configure the printer driver by clicking the Copy button while holding down the Ctrl key.

Enter a name in Name for Copy (up to 30 characters) and choose Copy Ratio.

Choose the Resolution, Scan Type, Document Size, Show Scanner Interface, Brightness and Contrast settings to be used.

Before finishing the Copy button configuration, set the Printer Name. Then choose your print settings from the Presets pop-up menu, then click OK to close the dialog box. By clicking the configured copy button, the print dialog box opens.

To copy, choose Copies & Pages from the pop-up menu. To fax, choose Send Fax from the pop-up menu. (See Sending a fax (MFC models only) on page 104.)

ControlCenter2

136

10

DEVICE SETTINGS 10

You can configure the machine settings or check ink levels by clicking a button.

Remote Setup (Not available for DCP models and MFC-240C) 10

The Remote Setup button lets you open the Remote Setup Program window to configure the machine setting menus.

Note For details, see Remote Setup (Not available for DCP models and MFC-240C) on page 143.

ControlCenter2

137

10

Quick-Dial (Not available for DCP models and MFC-240C) 10

The Quick-Dial button lets you open the Set Quick-Dial window in the Remote Setup Program, so you can easily register or change the dial numbers on your Macintosh.

Ink Level 10

The Ink Level button opens the Brother Status Monitor window, which displays the ink level for each cartridge.

Note The Brother Status Monitor application is located in Macintosh HD/Library/Printers/Brother/Utilities.

138

11

11

If you want to scan from the machine on a network, you must choose the networked machine in the DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the Model pop-up menu in the main screen of ControlCenter2. If you already installed the MFL-Pro Suite Software following the network installation steps in the Quick Setup Guide then this selection should already be made.

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel. (See Control Panel Setup in the Network Users Guide.)

Note For network scanning, maximum 25 clients can be connected to one machine on a network. For example, if 30 clients try to connect at a time, 5 clients will not be shown on the LCD.

Before using Network Scanning 11

Configuring network scanning 11

a From Library, choose Printers, Brother, Utilities and DeviceSelector, and then double-click DeviceSelector. The DeviceSelector window appears. This window can also be opened from ControlCenter2. For more information, see Using ControlCenter2 on page 122.

Network Scanning (For models with built-in network support)11

Network Scanning (For models with built-in network support)

139

11

b Specify your machine by IP address or node name. To change the IP address, enter the new IP address. To change the node name of your machine, enter the new node name. Each node (machine) has its own node name. You can find the node name by printing out the machine configuration page. (See Printing the Network Configuration List in the Network Users Guide.) The default node name is BRN_xxxxxx (`BRW_xxxxxx` for wireless models) (where xxxxxx is the last six digits of the Ethernet address). You can also choose a machine from the list of the machines available. Click Browse to show the list.

c Click OK.

Note To use Scan To button features on the machine, click the check box for Register your computer with

the Scan To functions at the machine. Then enter the name you want to be displayed on the machine LCD for your Macintosh. You can use up to 15 characters.

You can avoid receiving unwanted documents by setting a 4-digit Pin number. Enter your Pin number in the PIN number and Retype PIN number field. To send data to a computer protected by a Pin number, the LCD prompts you to enter the Pin number before the document can be scanned and sent to the machine. (See Using the Scan key on page 140.)

Network Scanning (For models with built-in network support)

140

11

Using the Scan key 11

Note If you use the Scan key with a USB connection, see Using the Scan key (For USB cable users) on page 113.

Scan to E-mail 11

When you choose Scan to E-mail, your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the default E-mail application on the designated Macintosh for addressing to the recipient. You can scan a black and white or colour document and it will be sent with the E-mail from the Macintosh as an attachment.

You can change the (Scan) configuration. (See E-mail on page 128.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to E-mail. Press OK.

d Press a or b to choose the destination Macintosh you want to use for E-mailing your document. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Network Scanning (For models with built-in network support)

141

11

Scan to Image 11

When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the default graphics application on the designated Macintosh. You can change the Scan configuration. (See Image (example: Apple PreView) on page 125.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to Image. Press OK.

d Press a or b to choose the destination Macintosh you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Scan to OCR 11

When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh (Presto! PageManager) and convert your document into text for viewing and editing from a word processing application on the designated Macintosh. You can change the Scan configuration. (See OCR (word processing application) on page 127.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to OCR. Press OK.

d Press a or b to choose the destination Macintosh you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

Note Presto! PageManager must be installed on your Macintosh.

Network Scanning (For models with built-in network support)

142

11

Scan to File 11

When you choose Scan to File, you can scan a black and white or colour document and send it directly to the Macintosh you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter2 on the designated Macintosh. You can change the Scan configuration. (See File on page 129.)

a Load your document.

b Press the (Scan) key.

c Press a or b to choose Scan to File. Press OK.

d Press a or b to choose the destination Macintosh you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh on the control panel. Press OK.

e Press Mono Start or Colour Start. The machine starts the scanning process.

143

12

12

Remote Setup (Not available for DCP models and MFC-240C) 12

The Remote Setup application lets you configure many machine settings from a Macintosh application. When you access this application, the settings on your machine will be downloaded automatically to your Macintosh and displayed on the screen. If you change the settings, you can upload them directly to the machine.

Note The Remote Setup application icon is in Macintosh HD/Library/Printers/Brother/Utilities.

OK Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK.

Cancel Lets you exit the Remote Setup application without uploading data to the machine.

Apply Lets you upload data to the machine without exiting the Remote Setup application.

Print Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine and then click Print. Export Lets you save the current configuration setting to a file.

Import Lets you read the setting from a file.

Remote Setup & PhotoCapture Center 12

Remote Setup & PhotoCapture Center

144

12

Note To save a setting, highlight the setting (for example, Set Quick-Dial) from the setting list then click Export.

Each setting you export is saved as a single file.

If you need to change the machine that was registered to your Macintosh during the installation of MFL-Pro Suite (see the Quick Setup Guide), or if the network environment was changed, you need to specify the new machine. Open the DeviceSelector and choose the new machine. (For network users only)

Remote Setup & PhotoCapture Center

145

12

PhotoCapture Center (Not available for MFC-3360C) 12

You can access a Media Card installed in the machine from a Macintosh.

CAUTION

DO NOT start your Macintosh with a media card installed in the media drive of the machine. You could lose your data or damage the card.

For USB cable users 12

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD- Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

Note If you create a name for the volume level of the media card, the name appears instead of Removable Disk.

b Double-click the Removable Disk icon. The files and folders on the media card appear on your screen.

c You can edit a file and save it to another drive on your Macintosh.

d Quit all applications that are running stored data on the media card and drag the Removable Disk icon into the Trash icon before you remove the media card from the machine.

Remote Setup & PhotoCapture Center

146

12

CAUTION

DO NOT unplug the power cord, USB cable or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the card (when the (PhotoCapture) key is flashing). You could lose your data or damage the card.

If you take out the media card while the PhotoCapture key is flashing, you must restart your Macintosh at once before putting the same media card back into the machine. If you do not restart your Macintosh, the data on your media card may be destroyed.

Note The PhotoCapture Center will only read one card at a time so do not put more than one media card in at a time.

While the machine is printing from PhotoCapture Center, PhotoCapture Center cannot perform any other operation.

Remote Setup & PhotoCapture Center

147

12

For Network users (For models with built-in network support) 12

a Put a CompactFlash 1, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card 2 into your machine. 1 This product supports CompactFlash type1. 2 This product supports xD-Picture Card Type M/Type H (Large Capacity).

b Launch any FTP software or any web browser in which FTP is supported. (e.g. Safari, Internet Explorer) Your browser software accesses the media card using the FTP protocol and the network Host Name of the machine. In the address bar, enter ftp://XXX.XXX.XXX.XXX (where XXX.XXX.XXX.XXX is the IP address of your Brother machine). Your browser software appears and a list of file names on your media card is shown.

c Click the name of the file you want to see.

When you take out a media card, do the following to prevent damage to the media card: 12

a Close the browser.

b Wait until the (PhotoCapture) key stops blinking before taking out the media card.

CAUTION

DO NOT unplug the power cord or remove a CompactFlash, Memory Stick, Memory Stick Pro, MultiMediaCard, SecureDigital or xD-Picture Card from the machine while it is reading the card (when the (PhotoCapture) key is flashing). You could lose your data or damage the card.

If you take out the media card while the PhotoCapture key is flashing, you must restart your Macintosh at once before putting the same media card back into the machine. If you do not restart your Macintosh, the data on your media card may be destroyed.

Index

148

A C ControlCenter2

Macintosh .......................................................... 122 ControlCenter3

Windows .............................................................. 44

D DeviceSelector ....................................... 107, 138, 144 Drivers

Macintosh

Brother Ink driver .............................................. 100 TWAIN .............................................................. 107

Windows

Brother printer driver .........................................2, 5 TWAIN ................................................................ 22 WIA ..................................................................... 29

F FAX (PC-FAX)

Macintosh

sending .....................................................104, 105 Windows

address book ...................................................... 82 cover page .......................................................... 79 facsimile style ..................................................... 86 group ................................................................... 83 receiving ............................................................. 89 sending ............................................................... 76 simple style ......................................................... 87

P PaperPort (Windows) ......................................42, 43

exporting ................................................................ 43 importing ................................................................ 43

PhotoCapture Center Macintosh .......................................................... 145 Windows .............................................................. 94

Presto! PageManager (Macintosh) ...........114, 119 Print

Macintosh

Brother Ink driver .............................................. 100 Windows

Brother printer driver ............................................. 5

R Remote Setup

Macintosh .......................................................... 143 Windows .............................................................. 74

S Scan

Macintosh

Network ............................................................. 138 OCR .................................................................. 119 Presto! PageManager ...........................114, 119 Resolution ......................................................... 109 Scan key ...................................................113, 140 TWAIN compliant .............................................. 107

Windows

Network ............................................................... 68 Resolution ........................................................... 26 Scan key .......................................................34, 71 ScanSoft PaperPort ........................................ 40 TWAIN Compliant ............................................... 22 WIA Compliant .................................................... 29

Status Monitor Macintosh ............................................................ 99 Windows ................................................................ 4

Visit us on the World Wide Web http://www.brother.com

This product is approved for use in the country of purchase only. Local Brother companies or their

Manualsnet FAQs

If you want to find out how the FAX-1860C Printer Driver Brother works, you can view and download the Brother FAX-1860C Printer Driver User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Brother FAX-1860C Printer Driver as well as other Brother manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Brother FAX-1860C Printer Driver. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brother FAX-1860C Printer Driver User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brother FAX-1860C Printer Driver User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brother FAX-1860C Printer Driver User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brother FAX-1860C Printer Driver User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Brother FAX-1860C Printer Driver User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.