Contents

Brother ADS-2000e Quick Setup Guide PDF

1 of 23
1 of 23

Summary of Content for Brother ADS-2000e Quick Setup Guide PDF

1

USA/CAN Version 0

ADS-2000e ADS-2500We

Thank you for choosing Brother. Your support is important to us and we value your business. Your Brother product is engineered and manufactured to the highest standards to deliver reliable performance, day in and day out.

Please read the Product Safety Guide before you set up your machine.

1 Unpack the machine and check the components

The components included in the box may differ depending on your country.

You can download the Users Guide and Network Users Guide for your model from the Brother Solutions Center at http://support.brother.com. If your computer does not have a DVD-ROM drive, the supplied DVD-ROM does not contain drivers for your operating system, or you want to download manuals and utilities, visit your model page at http://support.brother.com

WARNING This product was packaged in a plastic bag. To avoid suffocation, keep plastic bags away from babies

and children. Do not use the bag in cribs, beds, carriages, or play pens. The bag is not a toy.

Use only the AC power cord supplied with this product.

a Remove the protective tape and film covering the machine and the LCD or Control Panel.

b Make sure you have all the components.

NOTE Unless otherwise specified, illustrations in this guide show the ADS-2500We.

AC Power Cord USB Interface Cable

Carrier Sheet/ Plastic Card Carrier Sheet

Quick Setup Guide Product Safety Guide

DVD-ROM Product Registration Sheet (USA only)

Warranty Card (USA only)

NOTE We recommend saving the original packaging in case you must ship your machine. Use the supplied USB cable if you want to connect the machine to a computer.

Start Here Quick Setup Guide ADS-2000e / ADS-2500We

2

2 Connect the power cord

a Connect the power cord.

WARNING The machine must be fitted with a three prong grounded plug.

b Open the Top Cover 1.

c Pull the Output Tray out of the machine1, and then unfold the Document Stopper2.

3 Choose your language (if needed) (ADS-2500We only)

a Press .

b Press a or b to display Initial Setup. Press Initial Setup.

c Press Local Language.

d Press a or b to display your language. Press your language.

e Press .

IMPORTANT DO NOT CONNECT THE USB CABLE YET.

1

2

1

W ired

N etw

o rk

W in

d o

w s

M

acin to

sh

U S

B W

ireless N etw

o rk

3

4 Choose your connection type

These installation instructions are for Windows XP Home, XP Professional, Windows Vista, Windows 7, Windows 8, and OS X v10.7.5, 10.8.x and 10.9.x.

If your computer does not have a DVD-ROM drive or the supplied DVD-ROM does not contain drivers for your operating system, or you want to download manuals and utilities, visit your model page at http://support.brother.com. Some software applications included on the DVD-ROM may not be available as a download.

NOTE Windows 8 users: If the Brother manuals are in PDF format, use Adobe Reader to open them. If Adobe Reader is installed on your computer but you cannot open the files in Adobe Reader, change the file association for PDF.

For Wired Network (ADS-2500We only) Go to page 8

For Wireless Network (ADS-2500We only) Go to page 12

For USB interface cable Windows, go to page 4 Macintosh, go to page 6

4

WindowsUSB

For Windows USB interface users (Windows XP Home/XP Professional/Windows Vista/Windows 7/Windows 8)

5 Before you install

Make sure that your computer and your Brother machine are ON.

6 Install MFL-Pro Suite

a Put the DVD-ROM into your DVD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b Click Install MFL-Pro Suite, and then click Yes if you accept the license agreements.

c Choose Local Connection (USB), and then click Next.

d Follow the on-screen instructions.

NOTE DO NOT CONNECT THE USB CABLE YET.

If there are any programs running, close them.

The screens may differ depending on your operating system.

The DVD-ROM includes Nuance PaperPort12SE. This software supports Windows XP Home (SP3 or greater), XP Professional (SP3 or greater), Windows Vista (SP2 or greater), Windows 7 and Windows 8. Update to the latest Windows Service Pack before installing MFL-Pro Suite.

NOTE If the Brother screen does not appear

automatically, go to Computer (My Computer).

(For Windows 8: click the (File Explorer)

icon on the taskbar, and then go to Computer.)

Double-click the DVD-ROM icon, and then double-click start.exe.

NOTE For Windows Vista, Windows 7 and Windows 8, when the User Account Control screen appears, click Allow or Yes.

5

WindowsUSB W

in d

o w

s

M acin

to sh

U S

B

7 Connect the USB cable

a Connect the USB cable to the USB port

marked with a symbol on the back of

your machine. Connect the other end of the cable to your computer.

b The installation will continue automatically.

The installation screens appear one after another.

c When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions.

8 Finish and restart

a Click Finish to restart your computer.

b The following screens will appear:

When the Software Update Setting screen appears, choose the software update setting you want and click OK.

When the Brother Product Research and Support Program screen appears, select your preference and follow the on-screen instructions.

To install optional applications:

Now go to

Page 19

NOTE DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

NOTE If an error message appears during the

software installation, run the Installation

Diagnostics, double-click (Brother Utilities) on the desktop, and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar.

Depending on your security settings, a Windows Security or antivirus software window may appear when using the machine or its software. Please click Allow or Permit the window to continue.

NOTE Internet access is required for the software update and the Brother Product Research and Support Program.

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

6

MacintoshUSB

For Macintosh USB interface users (OS X v10.7.5, 10.8.x and 10.9.x)

5 Before you install

Make sure that your Macintosh and your Brother machine are ON.

6 Connect the USB cable

Connect the USB cable to the USB port marked with

a symbol on the back of your machine. Connect

the other end of the cable to your computer.

7 Install MFL-Pro Suite

a Download the full driver and software package from the Brother Solutions Center (http://support.brother.com/). -> Select your country. -> Select your language. -> Click Downloads, navigate to your product

page, then select your OS.

b Double-click the Start Here OSX icon to install. If the model name screen appears, choose your machine.

c Choose Local Connection (USB), and then click Next. Follow the on-screen instructions.

d After the installation, the Brother software will search for the Brother device. This will take a few moments to complete.

NOTE OS X v10.6.x users must upgrade to OS X v10.7.5 - 10.9.x.

NOTE DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Connect the machine directly to your Macintosh.

NOTE For help identifying your OS, click the link How to identify your Operating System (OS).

7

MacintoshUSB W

in d

o w

s

M acin

to sh

U S

B

e Choose your machine from the list, and then click Next.

To install optional applications:

Now go to

Page 20

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

8

WindowsWired Network (ADS-2500We only)

5 Connect the network cable

a Make sure that your computer and your Brother machine are ON.

b You will find the Ethernet port marked with a

symbol on the back of the machine as

shown below. Remove the protective cap and connect the network cable to the Ethernet port.

c Connect the cable to your network.

For Mobile device users:

For Windows users:

Now go to

Page 9

For Macintosh users:

Now go to

Page 11

NOTE If there are any programs running, close them.

USB

NOTE Download and install Brother iPrint&Scan

(Android/iOS/Windows Phone) from your mobile devices application download site.

To download the Users Guide for the application you are using (Brother iPrint&Scan), visit the Brother Solutions Center at http://support.brother.com and click Manuals on your models page.

Finish The installation is now complete and it is time to do a test scan.

NOTE For Windows XP Home/XP Professional/

Windows Vista/Windows 7/Windows 8

The screens may differ depending on your operating system.

The DVD-ROM includes Nuance PaperPort12SE. This software supports Windows XP Home (SP3 or greater), XP Professional (SP3 or greater), Windows Vista (SP2 or greater), Windows 7 and Windows 8. Update to the latest Windows Service Pack before installing MFL-Pro Suite.

NOTE OS X v10.6.x users, upgrade to OS X v10.7.5 - 10.9.x.

W in

d o

w s

M

acin to

sh

W ired

N etw

o rk

9

WindowsWired Network (ADS-2500We only)

6 Install MFL-Pro Suite

a Put the supplied DVD-ROM into your DVD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b The DVD-ROM Top Menu will appear. Click Install MFL-Pro Suite and click Yes if you accept the license agreements. Follow the on-screen instructions.

c Choose Wired Network Connection (Ethernet), and then click Next.

d When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

e The installation of the Brother drivers will automatically start. The installation screens appear one after another.

f When the On-Line Registration screen appears, make your selection and follow the on-screen instructions.

NOTE If the Brother screen does not appear

automatically, go to Computer (My Computer). (For Windows 8: click the (File Explorer) icon on the taskbar, and then go to Computer.)

Double-click the DVD-ROM icon, and then double-click start.exe.

NOTE For Windows Vista, Windows 7 and Windows 8, when the User Account Control screen appears, click Allow or Yes.

IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

10

WindowsWired Network (ADS-2500We only)

7 Finish and restart

a Click Finish to restart your computer.

b The following screens will appear.

When the Software Update Setting screen appears, choose the software update setting you want and click OK.

When the Brother Product Research & Support Program starts up, follow the on-screen instructions.

To install optional applications:

Now go to

Page 19

NOTE Internet access is required for the software update and the Brother Product Research & Support Program.

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

W in

d o

w s

M

acin to

sh

W ired

N etw

o rk

11

MacintoshWired Network (ADS-2500We only)

6 Install MFL-Pro Suite

a Download the full driver and software package from the Brother Solutions Center (http://support.brother.com/). -> Select your country. -> Select your language. -> Click Downloads, navigate to your product

page, then select your OS.

b Double-click the Start Here OSX icon to install. If the model name screen appears, choose your machine.

c Choose Wired Network Connection (Ethernet), and then click Next. Follow the on-screen instructions.

d After the installation, the Brother software will search for the Brother device. This will take a few moments to complete.

e Choose your machine from the list, and then click Next.

To install optional applications:

Now go to

Page 20

NOTE For help identifying your OS, click the link How to identify your Operating System (OS).

NOTE If your machine is not found over the network,

confirm your network settings.

You can find your machines MAC Address (Ethernet Address) and IP Address from the control panel of the machine.

If this screen appears, enter a name for your Macintosh up to 15 characters long, and then click Next.

The name you enter will appear on the machines LCD when you choose a scan option. (For more information, see Scan from the Control Panel of the Machine in the Users Guide.)

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

12

For Wireless Network Users (ADS-2500We only)

For wireless network interface users

5 Choose your wireless setup method

The following instructions offer two methods for setting up your Brother machine on a wireless network. If you want to scan using your mobile devices only, select method b. Otherwise, select method a.

a Setup using the driver and a USB cable (Windows and Macintosh)

We recommend using a computer wirelessly connected to your network for this method.

You will need to use a USB cable temporarily during configuration.

Now go to page 13

b Setup using your Brother machine

Use this method if you want to scan using your mobile devices only.

If you want to scan using your computer, use method a.

Now go to page 16

13

For Wireless Network Users (ADS-2500We only) W

ireless N etw

o rk

6 Setup using the DVD-ROM and USB cable (Windows and Macintosh)

For Windows Users:

a Put the DVD-ROM into your DVD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b Click Install MFL-Pro Suite and click Yes if you accept the license agreements.

c Choose Wireless Network Connection, and then click Next.

d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

e Follow the on-screen instructions to set up the Brother machine.

f Your machine will now try to connect to your wireless network. It may take a few minutes.

Wireless setup is now complete.

The Wi-Fi light on the Control Panel lights up, indicating that the machines Network I/F is set to WLAN.

To install MFL-Pro Suite

For Windows users:

Now go to

Step g on page 14

For Macintosh users:

Now go to

Step g on page 15

For Macintosh Users:

For Macintosh installation, download the full driver and software package from the Brother Solutions Center (http://support.brother.com/). After downloading the file on your Macintosh, double-click Start Here OSX. Select Wireless installation and follow the Wireless Device Setup instructions on your computer screen. When setup is complete, go to step g on page 15.

NOTE If the Brother screen does not appear

automatically, go to Computer (My Computer). (For Windows 8: click the (File Explorer) icon on the taskbar, and then go to Computer.)

Double-click the DVD-ROM icon, and then double-click start.exe.

NOTE For Windows Vista, Windows 7 and

Windows 8, when the User Account Control screen appears, click Allow or Yes.

Click Yes if you accept the license agreements.

14

For Wireless Network Users (ADS-2500We only)

g Choose your machine from the list, and then click Next.

h The installation of the Brother drivers will automatically start. The installation screens appear one after another.

i When the On-Line Registration screen appears, make your selection and follow the on-screen instructions.

7 Finish and restart

a Click Finish to restart your computer.

b The following screens will appear:

When the Software Update Setting screen appears, choose the software update setting you want and click OK.

When the Brother Product Research and Support Program starts up, follow the on-screen instructions.

To install optional applications:

Now go to

Page 19

NOTE If your machine is not found over the network,

confirm your settings by following the on-screen instructions.

If you are using WEP and the LCD displays Connected but your machine is not found on the network, make sure you entered the WEP key correctly. The WEP key is case-sensitive.

NOTE DO NOT cancel any of the screens during the

installation. It may take a few seconds for all screens to appear.

If the Windows Security screen appears, select the check box and click Install to complete the installation correctly.

NOTE If an error message appears during the software installation, run the Installation Diagnostics,

double-click (Brother Utilities) on the desktop, and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar.

NOTE Internet access is required for the software

update and the Brother Product Research and Support Program.

When you install MFL-Pro Suite, Brother Help will also be installed automatically. Launch

Brother Help by clicking

in the system tray. Click to access the Brother Solutions Center.

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

15

MacintoshWireless Network (ADS-2500We only) W

in d

o w

s

M acin

to sh

W ireless N

etw o

rk

g Choose your machine from the list, and then click Next.

h The installation of the Brother drivers will automatically start. Please wait for the software to install.

To install optional applications:

Now go to

Page 20

NOTE If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration.

NOTE You can display your machines MAC Address

(Ethernet Address) and IP Address using the machines LCD. To find the MAC Address, press

(Settings) > Network > WLAN >

MAC Address. To find the IP Address, press

(Settings) > Network > WLAN >

TCP/IP > IP Address.

If the Setup Network Scan to name screen appears, type a name for your Macintosh (up to 15 characters), and then click Next.

The name you type will appear on the LCD of the machine when you choose a scan option. For more information, see Scan from the Control Panel of the Machine in the Users Guide.

Finish The installation is now complete and it is time to do a test scan. See Test Scan (Scan to PC) on page 21.

16

For Wireless Network Users (ADS-2500We only)

7 Setup using your Brother machine

a Place the Brother machine within range of your wireless access point/router. The range may differ depending on your environment. Refer to the instructions provided with your wireless access point/router.

b If your wireless access point/router has the WPS or AOSS symbol as shown below, go to d. If not, go to c.

c On the machine's LCD, press

(Settings) > Network > WLAN >

Setup Wizard. Follow the instruction on the LCD. Then go to g.

d On the machines LCD, press

(Settings) > Network > WLAN >

WPS/AOSS.

When Enable WLAN? appears, press Yes to accept.

e When the LCD instructs you to start WPS or AOSS, press the WPS or AOSS button on your wireless access point/router (for more information, see the instructions provided with your wireless access point/router).

Press OK on your Brother machine's LCD

f This feature will automatically detect which mode (WPS or AOSS) your wireless access point/router uses and try to connect to your wireless network.

g If your wireless device is connected successfully, the LCD will display the message Connected until you press OK. If the connection failes, the LCD will display an error code. Make a note of the error code, see Troubleshooting on page 17, and then correct the error.

Wireless setup is now complete.

The Wi-Fi light on the Control Panel lights up, indicating that the machines Network I/F is set to WLAN.

NOTE If you do not start WPS/AOSS from the

machines LCD a few seconds after pressing the WPS or AOSS button on your wireless access point/router, the connection may fail.

If your wireless access point/router supports WPS and you want to configure your machine using the PIN (Personal Identification Number) Method, see Configuration using the PIN Method of WPS (Wi-Fi Protected Setup) in the Network Users Guide.

NOTE Connect your mobile device to a wireless

access point/router using a Wi-Fi connection.

Download and install Brother iPrint&Scan (Android/iOS/Windows Phone) from your mobile devices application download site.

To download the Users Guide for the application you are using (Brother iPrint&Scan), visit the Brother Solutions Center at http://support.brother.com and click Manuals on your models page.

17

For Wireless Network Users (ADS-2500We only) W

ireless N etw

o rk

Troubleshooting

How can I find the wireless security information (SSID* and Network Key**)?

* If the WLAN access point/router is not broadcasting the SSID, the SSID will not automatically be detected. You must manually enter the SSID name. See Configuring your machine when the SSID is not broadcasting in the Network Users Guide.

**The Network Key may also be described as the Password, Security Key, or Encryption Key.

Error Codes If the LCD displays an error code, locate code in the table that follows and use the recommended solution to correct the error.

If you need assistance during setup and want to contact Brother Customer Service, make sure you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.

1) Check the documentation provided with your wireless access point/router.

2) The default SSID could be the manufacturers name or the model name.

3) If you do not know the security information, please consult the router manufacturer, your system administrator, or your Internet provider.

Error Code Recommended Solutions

TS-01

The wireless setting is not activated.

Turn the wireless setting to ON:

1. On your machine, press (Settings) > Network > WLAN > Setup Wizard.

2. When Enable WLAN? is displayed, press Yes. This will start the wireless setup wizard.

TS-02

The wireless access point/router cannot be detected.

1. Check the following: - Make sure that the wireless access point/router is powered on. - Move your machine to an obstruction-free area, or closer to the wireless access

point/router. - Temporarily place your machine within about 3.3 feet (one meter) from the wireless

access point when you are configuring the wireless settings. - If your wireless access point/router is using MAC address filtering, confirm that the

Brother machines MAC address is allowed in the filter.

2. If you manually entered the SSID and security information (SSID/authentication method/encryption method/Network Key), the information may be incorrect.

Confirm the SSID and security information and re-enter the correct information as necessary. See How can I find the wireless security information (SSID* and Network Key**)? on page 17.

TS-03

The wireless network and security setting you entered may be incorrect.

Confirm the wireless network settings. See How can I find the wireless security information (SSID* and Network Key**)? on page 17.

Confirm that the entered or selected SSID/authentication method/encryption method/UserID/Userpass are correct.

18

For Wireless Network Users (ADS-2500We only)

TS-04

The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine.

For infrastructure mode, change the authentication and encryption methods of the wireless access point/router. Your machine supports the following authentication methods:

Authentication Method Encryption Method

WPA-Personal TKIP

AES

WPA2-Personal AES

Open WEP

None (without encryption)

Shared key WEP

If your problem is not solved, the SSID or network settings you entered may be incorrect. Confirm the wireless network settings. See How can I find the wireless security information (SSID* and Network Key**)? on page 17.

For ad-hoc mode, change the authentication and encryption methods of your computer for the wireless setting. Your machine supports Open authentication method only, with optional WEP encryption.

TS-05

The security information (SSID/Network Key) is incorrect.

Confirm the SSID and security information (Network Key). See How can I find the wireless security information (SSID* and Network Key**)? on page 17.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.

TS-06

The wireless security information (Authentication method/Encryption method/Network Key) is incorrect.

Confirm the wireless security information (Authentication method/Encryption method/ Network Key) using the Authentication Method table in error TS-04. See How can I find the wireless security information (SSID* and Network Key**)? on page 17.

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.

TS-07

The machine cannot detect a wireless access point/router that has WPS or AOSS enabled.

To configure your wireless settings using WPS or AOSS, you must operate both your machine and the wireless access point/router. Confirm that your wireless access point/router supports WPS or AOSS, and try starting from step 7 on page 16 again.

If you do not know how to operate your wireless access point/router using WPS or AOSS, see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator.

TS-08

Two or more wireless access points that have WPS or AOSS enabled are detected.

Confirm that only one wireless access point/router within range has the WPS or AOSS method active and try again.

To avoid interference from other access points, after a few minutes, try again starting from step 7 on page 16.

TS-20 The machine is still trying to connect to your wireless network. Please wait a few minutes, and then check the WLAN status.

Error Code Recommended Solutions

19

Install Optional Applications

1 Install optional applications (Windows users)

NewSoft Presto! BizCard 6 Presto! BizCard lets you manage the information from scanned business cards, such as names, companies, mailing addresses, phone/fax numbers and e-mail addresses on your computer. Simply scan or import your business cards, and Presto! BizCard automatically saves the data and image for each card. Different viewing modes are available for easy searching, editing, creating, and sorting.

Nuance PDF Converter Professional 8 Nuance PDF Converter Professional 8 offers a variety of features for handling PDF files. It can unlock and open PDF files for viewing, editing, annotation and re-assembly. Enter the Nuance serial number that is shown on the MFL-Pro Suite DVD-ROM sleeve when installing Nuance PDF Converter Professional 8.

a Reinsert the DVD-ROM or double-click the start.exe program. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b The DVD-ROM Top Menu will appear. Click Additional Applications.

c Click the button for the application you want to install. (These applications available may differ depending on your country.)

d When installation is complete, click Back to go back to the Additional Applications screen and install other applications.

To exit, click Exit.

NOTE To start NewSoft Presto! BizCard 6, do one of

the following:

- Windows XP, Windows Vista and

Windows 7 users: Click (Start) > All Programs > NewSoft > Presto! BizCard 6.

- Windows 8 users: Move your mouse to the lower right corner of your desktop. When the

menu bar appears, click (Start) and

then click (Presto! BizCard 6).

To start Nuance PDF Converter Professional 8, do one of the following:

- Windows XP, Windows Vista and

Windows 7 users: Click (Start) > All Programs > Nuance PDF Converter Professional 8 > PDF Converter Professional.

- Windows 8 users: Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Start and then click

(PDF Converter Professional).

Finish The installation is now complete.

20

Install Optional Applications

1 Install optional applications (Macintosh users)

NewSoft Presto! BizCard 6 Presto! BizCard lets you manage the information from scanned business cards, such as names, companies, mailing addresses, phone/fax numbers and e-mail addresses on your computer. Simply scan or import your business cards, and Presto! BizCard automatically saves the data and image for each card. Different viewing modes are available for easy searching, editing, creating, and sorting.

Presto! PageManager Presto! PageManager adds Optical Character Recognition (OCR) capability to Brother ControlCenter2. For mode detail about ControlCenter2, See Scan Using ControlCenter2 (Macintosh) in the User's Guide. OCR allows you to scan a document and convert its contents to text, so that you can edit the text using the word processing application of your choice. You can also scan, share and organize photos and documents using Presto! PageManager.

a Double-click the Brother Support icon to install. The Brother Support window will appear.

b Click the button for the application you want to install. (These applications available may differ depending on your country.)

Finish The installation is now complete.

21

Test Scan (Scan to PC)

1 Scan your document

Your Brother scanner offers various scanning methods (see the Users Guide). With the following Scan to File feature, you can scan and save documents as PDF files. To scan documents and configure various settings, please ensure you have installed the driver and connected the machine to your computer by following the instructions in this guide.

a Confirm that the machine is connected to your computer.

b Load your document.

ADS-2000e users, go to c.

ADS-2500We users, go to d.

c Press (Scan to PC key). The machine

starts to feed and scan your document. Go to i.

d Swipe left or right, or press d or c to display Scan 1.

e Press to PC.

f Swipe left or right to select to File and then press OK.

g Select the destination computer you want to save to.

h Press Start. The machine starts to feed and scan your document.

i The scanned data is saved in PDF format destination folder on the computer that is connected to the machine.

NOTE When you load multiple documents, position the documents so that the leading edges are aligned at a slight angle in the feed direction.

Finish The test scan is now complete.

22

Users Guides and where to find them

Download your Brother machine's User's Guides from the Brother Solutions Center.

http://support.brother.com/ and:

-> Select your country. -> Select your language. -> Click Manuals, navigate to your product page, then click on the User's Guide(s) you want.

If you cannot download these User's Guides from the Brother Solutions Center and want to request a printed copy of any guide, call our customer service center (USA only)

1-877-BROTHER (1-877-276-8437)

NOTE For help identifying your model name, click the link: How to identify your model name.

Which manual? Whats in it?

Quick Setup Guide (This book)

Follow the instructions for setting up your machine and installing the drivers and software for the operating system and connection type you are using. This Guide also includes the Safety Instructions before you set up your machine. Read the instructions first.

Users Guide Learn the Scan operations, learn how to perform routine maintenance, and see troubleshooting tips.

Network Users Guide (ADS-2500We only)

This Guide provides useful information about network settings and security settings using the Brother machine. You can also find supported protocol information for your machine and detailed troubleshooting tips.

Web Connect Guide (ADS-2500We only)

This Guide provides useful information about accessing internet services from the Brother machine, as well as downloading images and uploading files directly from internet services.

Mobile Print/Scan Guide for Brother iPrint&Scan (ADS-2500We only)

This Guide provides useful information about scanning from your Brother machine to your mobile device when connected to a Wi-Fi network. For more information on Printing using this app to devices supporting print refer to the guide.

Brother Image Viewer Guide for Android

This Guide provides useful information about using your Android mobile device to view and edit documents that were scanned by a Brother machine.

Brother ScanViewer Guide for iOS/OS X

This Guide provides useful information about using your iOS device or Macintosh computer to view and edit docum

Manualsnet FAQs

If you want to find out how the ADS-2000e Brother works, you can view and download the Brother ADS-2000e Quick Setup Guide on the Manualsnet website.

Yes, we have the Quick Setup Guide for Brother ADS-2000e as well as other Brother manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Setup Guide should include all the details that are needed to use a Brother ADS-2000e. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brother ADS-2000e Quick Setup Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brother ADS-2000e Quick Setup Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brother ADS-2000e Quick Setup Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brother ADS-2000e Quick Setup Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Brother ADS-2000e Quick Setup Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.