Contents

Brother DCP-1512(E) Software User's Guide PDF

1 of 160
1 of 160

Summary of Content for Brother DCP-1512(E) Software User's Guide PDF

Software Users Guide

Not all models are available in all countries.

Version 0

UK

i

Applicable models

This Users Guide applies to the following models.

DCP-1510(E)/1511/1512(E)

MFC-1810(E)/1811/1815

For DCP users: This documentation is for both MFC and DCP models. Where it says MFC in this users guide, please read MFC-xxxx as DCP-xxxx.

Definitions of notes

We use the following icons throughout this Users Guide:

IMPORTANT NOTE

This product is approved for use in the country of purchase only. Do not use this product outside the country of purchase as it may violate the power regulations of that country.

For DCP users: In this manual, the screens in this manual are from MFC models, since DCP models and MFC models have identical features. Where they display MFC in this manual, please read MFC-xxxx as DCP-xxxx.

For Macintosh users: Before using this manual, please be sure to install available drivers and software from the download page for your machine at the Brother Solutions Center (http://solutions.brother.com/).

For DCP users: You can download a printer driver and scanner drivers from the Brother Solutions Center.

For MFC users: You can download a printer driver, scanner drivers, PC-FAX Software and Remote Setup from the Brother Solutions Center.

Windows XP in this document represents Windows XP Professional, Windows XP Professional x64

Edition and Windows XP Home Edition.

Windows Vista in this document represents all editions of Windows Vista.

Windows 7 in this document represents all editions of Windows 7.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.

NOTE Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features.

CAUTION

ii

Table of Contents

Section I Windows

1 Printing 2

Using the Brother printer driver..................................................................................................................2 Printing a document...................................................................................................................................3 2-sided printing ..........................................................................................................................................4

Guidelines for printing on both sides of the paper ...............................................................................4 Simultaneous scanning, printing and faxing ..............................................................................................4 Printer driver settings.................................................................................................................................5 Accessing the printer driver settings..........................................................................................................6 Basic tab ....................................................................................................................................................7

Paper Size ...........................................................................................................................................7 Orientation ...........................................................................................................................................8 Copies .................................................................................................................................................8 Media Type..........................................................................................................................................8 Print Quality .........................................................................................................................................8 Print Settings .......................................................................................................................................9 Multiple Page.......................................................................................................................................9 2-sided / Booklet................................................................................................................................10 Print Preview .....................................................................................................................................11

Advanced tab...........................................................................................................................................12 Scaling...............................................................................................................................................12 Reverse Print.....................................................................................................................................12 Use Watermark..................................................................................................................................13 Watermark Settings ...........................................................................................................................14 Header-Footer Print...........................................................................................................................15 Toner Save Mode ..............................................................................................................................15 Administrator .....................................................................................................................................16 Other Print Options............................................................................................................................17 Density Adjustment............................................................................................................................17 Improve Print Output .........................................................................................................................17 Skip Blank Page ................................................................................................................................18 Print Text in Black .............................................................................................................................18

Print Profiles tab ......................................................................................................................................19 Add Profile .........................................................................................................................................20 Delete Profile .....................................................................................................................................20

Support ....................................................................................................................................................21 Device Settings tab..................................................................................................................................23 Status Monitor..........................................................................................................................................24

Monitoring the machines status ........................................................................................................25

iii

2 Scanning 26

Scanning a document using the WIA driver.............................................................................................26 WIA compliant ...................................................................................................................................26 Scanning a document into the PC .....................................................................................................26 Pre-Scanning to crop a portion you want to scan using the scanner glass .......................................28

Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan) ........................................................................32

Scanning a document into the PC .....................................................................................................32 Pre-Scanning to crop a portion you want to scan using the scanner glass .......................................34

Scanning a document using the TWAIN driver........................................................................................35 Scanning a document into the PC .....................................................................................................35 Pre-Scanning to crop a portion you want to scan..............................................................................37 Settings in the Scanner Setup dialog box..........................................................................................39

3 ControlCenter4 43

Overview..................................................................................................................................................43 Changing the user interface ..............................................................................................................43

Using ControlCenter4 in Home Mode......................................................................................................44 ControlCenter4 Features for Home Mode users ...............................................................................45

Scan tab ..................................................................................................................................................46 File types ...........................................................................................................................................47 Document Size ..................................................................................................................................47 Advanced Settings.............................................................................................................................48 Saving the scanned image ................................................................................................................49 Printing the scanned image ...............................................................................................................49 Opening the scanned image with an application ...............................................................................50 Attaching the scanned data to E-mail................................................................................................50

PC-FAX tab (For MFC models) ...............................................................................................................51 Sending an image file from your computer........................................................................................52 Sending a scanned image .................................................................................................................52 Viewing and printing received PC-FAX data .....................................................................................53

Device Settings tab..................................................................................................................................54 Configuring Remote Setup (For MFC models) ..................................................................................55 Accessing Address Book (For MFC models).....................................................................................55 Configuring Scan key settings ...........................................................................................................56

Support tab ..............................................................................................................................................58 Opening ControlCenter Help .............................................................................................................58 Using Brother Solutions Center .........................................................................................................58 Accessing the Brother CreativeCenter ..............................................................................................58

Using ControlCenter4 in Advanced Mode ...............................................................................................59 ControlCenter4 Features for Advanced Mode users .........................................................................60

Scan tab ..................................................................................................................................................61 File types ...........................................................................................................................................61 Document Size ..................................................................................................................................61 Advanced Settings.............................................................................................................................61 Opening the scanned image with an application ...............................................................................62 Attaching the scanned data to E-mail................................................................................................62 Saving the scanned image ................................................................................................................62 How to change the default settings of each button............................................................................63

PC-Copy tab ............................................................................................................................................64 Printing the scanned image ...............................................................................................................64

iv

PC-FAX tab (For MFC models) ...............................................................................................................65 Sending an image file from your computer........................................................................................65 Sending a scanned image .................................................................................................................65 Viewing and printing received PC-FAX data .....................................................................................66

Device Settings tab..................................................................................................................................67 Configuring Remote Setup (For MFC models) ..................................................................................67 Accessing Address Book (For MFC models).....................................................................................67 Configuring Scan key settings ...........................................................................................................68

Support tab ..............................................................................................................................................70 Opening ControlCenter Help .............................................................................................................70 Using Brother Solutions Center .........................................................................................................70 Accessing the Brother CreativeCenter ..............................................................................................70

Custom tab ..............................................................................................................................................71 Creating a Custom tab.......................................................................................................................71 Creating a Custom button..................................................................................................................72

Changing the Scan key settings for Scan to PC menu............................................................................73

4 Remote Setup (For MFC models) 75

Remote Setup..........................................................................................................................................75

5 Brother PC-FAX Software (For MFC models) 77

PC-FAX sending......................................................................................................................................77 Sending a file as a PC-FAX...............................................................................................................77 Setting up user information................................................................................................................79 Sending setup....................................................................................................................................80 Setting up a cover page.....................................................................................................................81 Entering cover page information........................................................................................................82

Address Book ..........................................................................................................................................83 Brother Address Book .......................................................................................................................84 Setting up a member in the Address Book ........................................................................................85 Setting up a group for broadcasting ..................................................................................................86 Editing member information...............................................................................................................86 Deleting a member or group..............................................................................................................87 Exporting the Address Book ..............................................................................................................88 Importing to the Address Book ..........................................................................................................90

PC-FAX receiving ....................................................................................................................................91 Enabling PC-FAX Receiving software on your machine ...................................................................92 Running the PC-FAX Receiving software on your PC.......................................................................93 Setting up your PC ............................................................................................................................94 Viewing new PC-FAX messages.......................................................................................................95

v

Section II Apple Macintosh

6 Printing and Faxing 97

Features in the printer driver (Macintosh)................................................................................................97 2-sided printing ........................................................................................................................................97

Guidelines for printing on both sides of the paper .............................................................................97 Manual 2-sided printing .....................................................................................................................97

Simultaneous scanning, printing and faxing ............................................................................................98 Choosing page setup options ............................................................................................................98 Choosing printing options ................................................................................................................101 Cover Page......................................................................................................................................101 Layout..............................................................................................................................................102 Print Settings ...................................................................................................................................103

Removing the Printer driver for Macintosh ............................................................................................106 Status Monitor........................................................................................................................................107

Updating the machines status ........................................................................................................107 Hiding or showing the window .........................................................................................................107 Quitting the window .........................................................................................................................108

Sending a fax (For MFC models)...........................................................................................................109

7 Scanning 113

Scanning a document using the ICA driver ...........................................................................................113 Choosing your machine from Print & Scan......................................................................................117

Scanning a document using the TWAIN driver......................................................................................118 Scanning a document into your Macintosh......................................................................................118 Pre-Scanning to crop a portion you want to scan............................................................................120 Settings in the Scanner window ......................................................................................................121

8 ControlCenter2 125

Using ControlCenter2 ............................................................................................................................125 Turning the AutoLoad feature off.....................................................................................................126

SCAN.....................................................................................................................................................127 File types .........................................................................................................................................128 Document Size ................................................................................................................................128 Advanced Settings...........................................................................................................................129 Image...............................................................................................................................................130 E-mail ..............................................................................................................................................131 File...................................................................................................................................................132

CUSTOM SCAN ....................................................................................................................................133 File types .........................................................................................................................................133 Document Size ................................................................................................................................133 Advanced Settings...........................................................................................................................133 User-defined button .........................................................................................................................133 Scan to Image .................................................................................................................................134 Scan to E-mail .................................................................................................................................136 Scan to File......................................................................................................................................137

COPY / PC-FAX Sending (Mac OS X v10.6.8, PC-FAX for MFC models only) ....................................139 DEVICE SETTINGS ..............................................................................................................................141

Remote Setup (For MFC models) ...................................................................................................142

vi

Address Book (For MFC models) ....................................................................................................143 Status Monitor .................................................................................................................................143

9 Remote Setup (For MFC models) 144

Remote Setup........................................................................................................................................144

Section III Using the Scan key

10 Scanning 147

Using the Scan key................................................................................................................................147 Scan to E-mail .................................................................................................................................148 Scan to Image .................................................................................................................................149 Scan to File......................................................................................................................................150

A Index 151

Section I

Windows I

Printing 2

Scanning 26

ControlCenter4 43

Remote Setup (For MFC models) 75

Brother PC-FAX Software (For MFC models) 77

2

1 1

NOTE The screens in this section are from Windows 7. Screens on your PC may vary depending on your operating system.

Using the Brother printer driver 1

A printer driver is software that translates data from the format used by a PC into the format needed by a particular printer, using a printer command language or page description language.

The printer drivers are on the installer CD-ROM we have supplied. Install the drivers by following the Quick Setup Guide. The latest printer drivers can also be downloaded from the Brother Solutions Center at:

http://solutions.brother.com/

Printing 1

Printing

3

1 Printing a document 1

When the machine receives data from your computer, it begins printing by picking up paper from the paper tray. The paper tray can feed plain paper and recycled paper. (For information about the Paper Tray and Recommended paper: See Users Guide)

a From your application, choose the Print command. If any other printer drivers are installed on your computer, choose Brother MFC-XXXX* as your printer driver from the Print or Print Settings menu in your software application, and then click OK or Print to begin printing. *(Where XXXX is your model name.)

NOTE You can choose the paper size and orientation in your application software.

If your application software does not support your custom paper size, choose the next largest paper size.

Then adjust the print area by changing the right and left margins in your application software.

Printing

4

1 2-sided printing 1

The supplied printer driver supports manual 2-sided printing.

Guidelines for printing on both sides of the paper 1

If the paper is thin, it may wrinkle.

If paper is curled, turn over the stack, straighten it and then put it back in the paper tray.

If the paper is not feeding correctly, it may be curled. Remove the paper, straighten it and turn over the stack.

When you use the manual 2-sided function, it is possible that there may be paper jams or poor print quality.

If there is a paper jam: See Users Guide: Paper Jams. If you have a print quality problem: See Users Guide: Improving the print quality.

The machine prints all the even-numbered pages on one side of the paper first. Then, the printer driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not recommended.

Simultaneous scanning, printing and faxing 1

Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a document into the computer. Fax sending will not be stopped during the computer printing. However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then continues printing when copying or fax receiving has finished.

Printing

5

1 Printer driver settings 1

You can change the following printer settings when you print from your computer:

Paper Size

Orientation

Copies

Media Type

Print Quality

Print Settings

Multiple Page

2-sided / Booklet

Print Preview

Scaling

Reverse Print

Use Watermark

Header-Footer Print

Toner Save Mode

Administrator

Density Adjustment

Improve Print Output

Skip Blank Page

Print Profiles

Print Text in Black

The following pages provide an overview of the printer driver settings. For more information, see the Help text in the printer driver.

Printing

6

1 Accessing the printer driver settings 1

a (For Windows XP) Click Start, and then Printers and Faxes.

(For Windows Vista)

Click , Control Panel, Hardware and Sound, and then Printers.

(For Windows 7)

Click , and then click Devices and Printers.

(For Windows 8) Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings, and then click Control Panel. In the Hardware and Sound group, click View devices and printers.

b (For Windows XP and Windows Vista) Right-click the Brother MFC-XXXX Printer icon (where XXXX is your model name) and select Properties. The printer properties dialog box appears.

(For Windows 7 and Windows 8) Right-click the Brother MFC-XXXX Printer icon (where XXXX is your model name) and select Printer properties. If printer driver options appear, select your printer driver. The printer properties dialog box appears.

c Choose the General tab and then click Preferences... or Printing Preferences.... The printer driver dialog box appears.

Printing

7

1 Basic tab 1

You can also change the Page Layout settings by clicking the illustration on the left side of the Basic tab.

a Choose Paper Size, Orientation, Copies, Media Type, Print Quality and Print Settings (1).

b Choose Multiple Page and 2-sided / Booklet (2).

c Confirm your current settings in the window (3).

d Click OK to apply your chosen settings. To return to the default settings, click Default, then OK.

NOTE If you want to preview your document before printing, check the Print Preview check box (4).

Paper Size 1

From the drop-down list choose the Paper Size you are using.

(1)

(2)

(3)

(4)

Printing

8

1 Orientation 1

Orientation selects the position of how your document will be printed (Portrait or Landscape).

Copies 1

The copies selection sets the number of copies that will be printed.

Collate

With the Collate check box selected, one complete copy of your document will be printed and then repeated for the number of copies you selected. If the Collate check box is not selected, then each page will be printed for all the copies selected before the next page of the document is printed.

Media Type 1

You can use the following types of media in your machine. For the best print quality, select the type of media that you wish to use.

Plain Paper

Recycled Paper

Print Quality 1

You can choose the print quality as follows:

Draft

Normal

Fine

Portrait (Vertical) Landscape (Horizontal)

Printing

9

1 Print Settings 1

You can change the print settings as follows:

Graphics

This is the best mode for printing documents that contain graphics.

Text

This is the best mode for printing text documents.

Manual

You can change the settings manually by choosing Manual and clicking Manual Settings....

You can set the brightness, contrast and other settings.

Multiple Page 1

The Multiple Page selection can reduce the image size of a page allowing multiple pages to be printed on one sheet of paper or enlarge the image size for printing one page on multiple sheets of paper.

Page Order

When the N in 1 option is selected, the page order can be selected from the drop-down list.

Border Line

When printing multiple pages onto one sheet, with the Multiple Page feature, you can choose to have a solid border, dashed border or no border around each page on the sheet.

Print cut-out line

When the 1 in NxN Pages option is selected, the Print cut-out line option can be selected. This option allows you to print a faint cut-out line around the printable area.

Printing

10

1 2-sided / Booklet 1

When you want to print a booklet or do 2-sided printing, use this function.

None

This disables 2-sided printing.

2-sided (Manual)

When you want to print on both sides of the paper, use this option.

2-sided (Manual)

The machine prints all the even-numbered pages first. Then the printer driver will stop and show the instructions required to reload the paper. When you click OK the odd-numbered pages will be printed.

When you choose 2-sided (Manual), the 2-sided Settings... button becomes available to select. You can set the following settings in the 2-sided Settings dialog box.

2-sided Type

There are four types of 2-sided binding directions available for each orientation.

Binding Offset

When you check Binding Offset, you can also specify the offset for binding in inches or millimetres.

Booklet (Manual)

Use this option to print a document in booklet format using 2-sided printing; it will arrange the document according to the correct page numbers and allows you to fold at the centre of the print output without having to change the order of the pages.

Booklet (Manual)

The machine prints all the even-numbered sides first. Then the printer driver will stop and show the instructions required to reload the paper. When you click OK the odd-numbered sides will be printed.

When you choose Booklet (Manual), the 2-sided Settings... button becomes available to select. You can set the following settings in the 2-sided Settings dialog box.

2-sided Type

There are two types of 2-sided binding directions available for each orientation.

Booklet Printing Method

When Divide into Sets is selected:

This option allows you to print the whole booklet into smaller individual booklet sets, it still allows you to fold at the centre of the smaller individual booklet sets without having to change the order of the page number. You can specify the number of sheets in each smaller booklet set, from 1 to 15. This option can help when folding a printed booklet that has a large number of pages.

Binding Offset

When you check Binding Offset, you can also specify the offset for binding in inches or millimetres.

Printing

11

1 Print Preview 1

You can preview a document before it is printed. If you check the Print Preview check box, the Print Preview Viewer window will open before printing starts.

1 Page List Area The Page List Area displays the page numbers for the actual pages that will be printed. If you chose a page in this list, a preview of the print results for the page will be displayed in the Preview Area. If you do not want to print a page, clear the check mark.

2 Preview Area The Preview Area displays a preview of the print results for the pages chosen in the Page List Area.

NOTE If the 2-sided (Manual) or Booklet (Manual) setting was chosen in the Printer driver settings, you cannot use the Print Preview function.

2

1

Printing

12

1 Advanced tab 1

You can change the following settings in this tab:

Scaling (1)

Reverse Print (2)

Use Watermark (3)

Header-Footer Print (4)

Toner Save Mode (5)

Administrator (6)

Other Print Options (7)

Scaling 1

You can change the print image scaling.

Reverse Print 1

Check Reverse Print to reverse the data (flip it upside down).

(1)

(4)

(2) (3)

(6) (5)

(7)

Printing

13

1 Use Watermark 1

You can put a logo or text into your document as a watermark. You can choose one of the preset Watermarks, or you can use a bitmap file that you have created. Check Use Watermark and then click the Settings... button.

Printing

14

1 Watermark Settings 1

Select Watermark 1

Choose the watermark you want to use.

To make an original watermark, click the Add button to add the watermark settings and then choose Use Text or Use Bitmap File in Watermark Style.

You can change the watermarks size and position on the page by selecting the watermark, and clicking the Settings... button.

Title

Enter a suitable title into the field.

Printing

15

1 Text

Enter your Watermark Text into the Text box, and then choose the Font, Style, Size and Darkness.

Bitmap

Enter the file name and location of your bitmap image in the File box, or click Browse to search for the file. You can also set the scaling size of the image.

Position

Use this setting if you want to control the position of the watermark on the page.

Bring to Front 1

This option will overlay the selected characters or image onto your printed document.

In Outline Text 1

Check In Outline Text if you only want to print an outline of the watermark. It is only available when you choose a text watermark.

Custom Settings 1

You can choose which watermark to print on the first page or on the other pages.

Header-Footer Print 1

When this feature is enabled, it will print the date and time on your document from your computers system clock and the PC login user name or the text you entered. By clicking Settings, you can customize the information.

ID Print

If you select Login User Name, your PC login user name will be printed. If you select Custom and enter the text in the Custom edit box, the text you entered will be printed.

Toner Save Mode 1

You can conserve toner use with this feature. When you set Toner Save Mode to on, print appears lighter. The default setting is off.

NOTE We do not recommend Toner Save Mode for printing photo or greyscale images.

Toner Save Mode is not available when Fine is selected for Print Quality.

Printing

16

1 Administrator 1

Administrators have the authority to limit access to functions such as Scaling and Watermark.

Password

Enter the password into this box.

NOTE Click Set Password... to change the password.

Copies Lock

Lock the copy pages selection to prevent multiple copy printing.

Multiple Page & Scaling Lock

Lock the scaling setting and multiple page setting to prevent changes being made.

Watermark Lock

Lock the current settings of the Watermark option to prevent changes being made.

Header-Footer Print Lock

Lock the current settings of the Header-Footer Print option to prevent changes being made.

Printing

17

1 Other Print Options 1

You can set the following options in Printer Function:

Density Adjustment

Improve Print Output

Skip Blank Page

Print Text in Black

Density Adjustment 1

Increase or decrease the print density.

NOTE Density Adjustment is not available when Fine is selected for Print Quality.

Improve Print Output 1

This feature allows you to improve a print quality problem.

Reduce Paper Curl

Choose this setting to reduce paper curl.

If you are printing only a few pages, you do not need to choose this setting.

NOTE This operation will decrease the temperature of the machine's fusing process.

Improve Toner Fixing

Choose this setting to improve toner fixing on paper.

NOTE This operation will increase the temperature of the machine's fusing process.

Printing

18

1 Skip Blank Page 1

If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them from printing.

NOTE This option does not work when you choose the following options:

Use Watermark

Header-Footer Print

N in 1 or 1 in NxN Pages in Multiple Page

2-sided (Manual) or Booklet (Manual)

Print Preview

Print Text in Black 1

This function enables all text to be printed in Black instead of grey scale.

NOTE It may not work with certain characters.

Printing

19

1 Print Profiles tab 1

Print Profiles are editable presets designed to give you quick access to frequently used printing configurations.

Print profile list box (1)

Delete Profile (2)

Always show Print Profiles tab first (3)

Add Profile (4)

Current print profile view (5)

a Choose your profile from the print profile list box.

b If you want to display the Print Profiles tab at the front of the window from the next time you print, check Always show Print Profiles tab first.

c Click OK to apply your chosen profile.

(1)

(2)

(3)(4)

(5)

Printing

20

1 Add Profile 1

The Add Profile dialog box appears by clicking Add Profile. You can add 20 new profiles with your preferred settings.

a Enter the desired title in Name.

b Choose an icon you want to use from the Icon list, then click OK.

c The current settings shown on the left side of the printer driver window will be saved.

Delete Profile 1

The Delete Profile dialog box appears by clicking Delete Profile. You can delete any of the profiles you have added.

a Click Delete Profile.

b Choose a profile you want to delete and click Delete.

c Click Yes.

d The selected profile will be deleted.

Printing

21

1 Support 1

Click Support... in the Printing Preferences dialog box.

Printing

22

1

Brother Solutions Center (1)

The Brother Solutions Center (http://solutions.brother.com/) is a website offering information about your Brother product including FAQs (Frequently Asked Questions), Users Guides, driver updates and tips for using your machine.

Original Supplies Website (2)

You can visit our website for original/genuine Brother supplies by clicking this button.

Brother CreativeCenter (3)

You can visit our website for free and easy online solutions for business and home users by clicking this button.

Check Setting (4)

You can check the current driver settings.

About (5)

This will list the printer driver files and version information.

(1)

(2)

(3)

(4) (5)

Printing

23

1 Device Settings tab 1

NOTE To access the Device Settings tab, see Accessing the printer driver settings on page 6.

You can detect the serial number in the Device Settings tab as follows.

Serial No. (1)

By clicking Auto Detect (2), the printer driver will probe the machine and display its serial number. If it fails to receive the information, the screen will display ---------------.

Auto Detect (2)

The Auto Detect function shows the available settings in the printer driver.

NOTE The Auto Detect (2) function is not available under the following machine conditions:

The machine is powered off.

The machine is connected to the print server using a USB cable in a network shared environment.

The USB cable is not connected to the machine correctly.

(1)

(2)

Printing

24

1 Status Monitor 1

The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of error messages.

You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing Status Monitor located in Start/All Programs/Brother/MFC-XXXX on your PC.

(Windows 7)

To show the Status Monitor icon on your taskbar, click the button. The Status Monitor icon will appear

in the small window. Then drag the icon to the taskbar.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not already

selected). Click Tools in the left navigation bar, and then click Status Monitor.

NOTE For more information about using the Status Monitor software, right-click the Status Monitor icon and

choose Help.

The automatic software update feature is active when the Status Monitor feature is active. With the update feature you can receive both Brother applications and machine firmware updates automatically.

Printing

25

1 Monitoring the machines status 1

The Status Monitor icon will change colour depending on the machines status.

A green icon indicates the normal stand-by condition.

A yellow icon indicates a warning.

A red icon indicates an error has occurred.

There are two locations where you can display the Brother Status Monitor on your PC - in the tasktray or on the desktop.

26

2

2

The scanning operations and drivers will be different depending on your operating system. The machine uses a TWAIN compliant driver for scanning documents from your applications.

Two scanner drivers are installed. A Windows Imaging Acquisition (WIA) driver (See Scanning a document using the WIA driver on page 26) and a TWAIN compliant scanner driver (See Scanning a document using the TWAIN driver on page 35).

Scanning a document using the WIA driver 2

WIA compliant 2

You can choose Windows Image Acquisition (WIA) for scanning images from the machine. You can scan images directly into any other application that supports WIA or TWAIN scanning.

Scanning a document into the PC 2

There are two ways in which you can scan a page. You can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass.

If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 28.)

a Load your document.

b Start the Microsoft Paint application to scan a document.

NOTE The instructions for scanning in this Guide are using Microsoft Paint. The scanning steps may vary when using other software applications.

c Click From scanner or camera on the File menu. The Scanner Setup dialog box appears.

d If necessary, adjust the following settings in the Scanner Setup dialog box:

Paper source (1)

Picture type (2)

Adjust the quality of the scanned picture (3)

Page size (4)

Preview (5)

Scan (6)

Scanning 2

Scanning

27

2

e (For MFC models) Choose the Paper source from the drop-down list (1).

f Choose the picture type (2).

g Choose the Page size from the drop-down list (4).

NOTE Skip this step if you choose Flatbed in step e.

h If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness, Contrast, Resolution (DPI) and Picture type from Advanced Properties. Click OK after you have changed the settings.

NOTE The scanner resolution can be set as high as 1200 dpi.

For resolutions greater than 1200 dpi, use the Scanner Utility. (See Scanner Utility on page 30.)

(1)

(2)

(3)

(4)

(5) (6)

Scanning

28

2

i Click the Scan button in the Scan dialog box (6). The machine starts scanning the document.

Pre-Scanning to crop a portion you want to scan using the scanner glass 2

The Preview button is used to preview an image when cropping any unwanted portions from the image. When you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.

NOTE Pre-Scanning is not available when using the ADF (Document Feeder).

a Follow the steps from a to c of Scanning a document into the PC on page 26.

b (For MFC models) Choose Flatbed in the Paper source drop-down list (1).

c Choose the picture type (2).

d Click Preview (5). The image is scanned into the PC and appears in the scanning area (4).

(1)

(2)

(3)

(4)

(5) (6)

Scanning

29

2

e Press and hold down the left mouse button and drag it over the portion you want to scan.

f If you want to change any advanced settings, click Adjust the quality of the scanned picture (3). You can choose Brightness, Contrast, Resolution (DPI) and Picture type from Advanced Properties. Click OK after you have changed the setting.

g Click Scan in the Scan dialog box (6). The machine starts scanning the document.

This time only the chosen area of the document appears in the Microsoft Paint window (or your application window).

Scanning

30

2

Scanner Utility 2

The Scanner Utility is used for configuring the WIA scanner driver for resolutions greater than 1200 dpi. You must restart your PC for the new settings to take effect.

NOTE If you scan the document at a resolution greater than 1200 dpi, the file size may be very large. Make sure

that you have enough memory and hard disk space for the size of the file you are trying to scan. If you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.

(Windows XP)

You can change the paper size using the Scanner Utility. If you want to set Legal size as the default size, use this utility to change the setting.

Running the utility

Do one of the following:

(Windows XP, Windows Vista and Windows 7)

You can run the utility by choosing the Scanner Utility located in Start/All Programs/Brother/MFC-XXXX (where XXXX is your model name)/ Scanner Settings/Scanner Utility.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not already

selected). Click SCAN in the left navigation bar, and then click Scanner Utility.

Screens on your computer may vary depending on your operating system or the model of your machine.

Scanning

31

2

NOTE (Windows Vista, Windows 7 and Windows 8)

When the User Account Control screen appears, do the following:

For users who have administrator rights: Click Allow or Yes.

For users who do not have administrator rights: Enter the administrator password and click OK or Yes.

Scanning

32

2

Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan) 2

Scanning a document into the PC 2

There are two ways in which you can scan a page. You can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass.

If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the scanner glass. (See Pre-Scanning to crop a portion you want to scan using the scanner glass on page 34.)

a Load your document.

b Open your software application to scan the document.

c Do one of the following:

(Windows Photo Gallery)

Click File, then Import from Camera or Scanner.

(Windows Fax and Scan)

Click File, New, then Scan.

d Choose the scanner you want to use.

e Click Import or OK. The Scan dialog box appears.

Scanning

33

2

f If necessary, adjust the following settings in the Scan dialog box:

Scanner (1)

Profile (2)

Source (3)

Paper size (4)

Color format (5)

File type (6)

Resolution (DPI) (7)

Brightness (8)

Contrast (9)

Scanning area (10)

Preview (11)

Scan (12)

g Click Scan in the Scan dialog box. The machine starts scanning the document.

(1)

(2) (3) (4)

(5) (6) (7)

(8)

(11) (12)

(9)

(10)

Scanning

34

2

Pre-Scanning to crop a portion you want to scan using the scanner glass 2

The Preview button is used to preview an image when cropping any unwanted portions from the image. When you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.

NOTE Pre-Scanning is not available when using the ADF (Feeder (Scan one side)).

a Follow the steps a to e of Scanning a document into the PC on page 32.

b (For MFC models) Choose Flatbed in the Source drop-down list.

c If necessary, adjust the additional settings in the Scan dialog box.

d Click Preview. The image is scanned into the PC and appears in the scanning area.

e Press and hold down the left mouse button and drag it over the portion you want to scan.

f Click Scan in the Scan dialog box. The machine starts scanning the document. This time only the chosen area of the document appears in your application window.

Scanning

35

2

Scanning a document using the TWAIN driver 2

The Brother machine software includes a TWAIN Scanner driver for Windows. You can use this Windows TWAIN Scanner driver with any applications that support TWAIN specifications.

When you scan a document, you can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass.

For more information on loading the documents: See Users Guide: Loading documents.

NOTE The first time you use the Brother TWAIN driver, set it as the default driver. The method of choosing the driver or scanning a document may vary depending on the application you are using.

Scanning a document into the PC 2

There are two ways in which you can scan a page. You can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass.

a Load your document.

b Start your graphics application, and select the scan operation. The Scanner Setup dialog box appears.

Scanning

36

2

c If necessary, adjust the following settings in the Scanner Setup dialog box:

Scan (Image Type) (1)

Resolution (2)

Scan Type (3)

Reduce Noise (4)

Brightness (5)

Contrast (6)

Document Size (7)

d Click Start. When scanning has finished, click Cancel to return to the graphics application window.

(1)

(7)

(6)

(5) (4)

(2)

(3)

Scanning

37

2

Pre-Scanning to crop a portion you want to scan 2

You can preview your image and crop unwanted portions before scanning by using the PreScan button.

When you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.

a Load your document.

b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and Document Size, as needed.

c Click PreScan. The image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup dialog box.

(1)

Scanning

38

2

d Press and hold down the left mouse button and drag it over the portion you want to scan.

1 Scanning area

NOTE

You can enlarge the image using , and then use to restore the image to its original size.

e Load your document again.

NOTE Skip this step if you loaded the document on the scanner glass in step a.

f Click Start. When scanning has finished, click Cancel to return to the graphics application window. This time only the chosen area of the document appears in your application window.

g In your application window, use the options available to refine the image.

1

Scanning

39

2

Settings in the Scanner Setup dialog box 2

Scan (Image Type) 2

Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be altered for each default setting.

The default settings are listed in the table below:

Resolution 2

You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colour options.

Scan Type 2

Black & White

Use for text or line art.

Grey (Error Diffusion)

Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey images without using true grey dots. Black dots are put in a specific pattern to give a grey appearance.)

True Grey

Use for photographic images or graphics. This mode is more exact due to using up to 256 shades of grey.

Scan (Image Type) Resolution Scan Type

Photo Use for scanning photo images. 300 x 300 dpi 24bit Colour

Web Use for attaching the scanned image to web pages. 100 x 100 dpi 24bit Colour

Text Use for scanning text documents. 200 x 200 dpi Black & White

Resolution Black & White/ Grey (Error Diffusion)

256 Colour True Grey/24bit Colour

100 x 100 dpi Yes Yes Yes

150 x 150 dpi Yes Yes Yes

200 x 200 dpi Yes Yes Yes

300 x 300 dpi Yes Yes Yes

400 x 400 dpi Yes Yes Yes

600 x 600 dpi Yes Yes Yes

1200 x 1200 dpi Yes No Yes

2400 x 2400 dpi Yes No Yes

4800 x 4800 dpi Yes No Yes

9600 x 9600 dpi Yes No Yes

19200 x 19200 dpi Yes No Yes

Scanning

40

2

256 Colour

Uses up to 256 colours to scan the image.

24bit Colour

Uses up to 16.8 million colours to scan the image.

Although using 24bit Colour creates an image with the most accurate colour, the image file will be about three times larger than a file created with 256 Colour. It requires the most memory and has the longest transfer time.

Reduce Noise 2

You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise setting is available when using 24bit Colour and scan resolutions of 300 300 dpi, 400 400 dpi or 600 600 dpi.

Brightness 2

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average.

You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again.

NOTE The Brightness setting is not available when 256 Colour is chosen.

Contrast 2

You can increase or decrease the Contrast level by moving the slider to the left or right. An increase emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can also enter a value in the box to set the Contrast.

NOTE The Contrast setting is only available when Grey (Error Diffusion), True Grey or 24bit Colour is chosen.

When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the contrast and resolution to see which setting best suits your needs.

Document Size 2

Choose one of the following sizes:

A4 210 x 297 mm (8.3 x 11.7 in)

JIS B5 182 x 257 mm (7.2 x 10.1 in)

Letter 215.9 x 279.4 mm (8 1/2 x 11 in)

Legal 215.9 x 355.6 mm (8 1/2 x 14 in) (For MFC models)

A5 148 x 210 mm (5.8 x 8.3 in)

Scanning

41

2

JIS B6 128 x 182 mm (5 x 7.2 in)

A6 105 x 148 mm (4.1 x 5.8 in)

Executive 184.1 x 266.7 mm (7 1/4 x 10 1/2 in)

Business Card 90 x 60 mm (3.5 x 2.4 in)

To scan business cards, choose the Business Card size, and then place the business card face down at the top left of the scanner glass.

10 x 15 cm (4 x 6 in)

13 x 20 cm (5 x 8 in)

9 x 13 cm (3.5 x 5 in)

13 x 18 cm (5 x 7 in)

Postcard 1 100 x 148 mm (3.9 x 5.8 in)

Postcard 2 (Double) 148 x 200 mm (5.8 x 7.9 in)

Custom

(For DCP models) User adjustable from 8.9 8.9 mm to 215.9 297 mm

(For MFC models) User adjustable from 8.9 8.9 mm to 215.9 355.6 mm

If you choose Custom as the size, the Custom Document Size dialog box appears.

Enter the Custom Document Size Name, Width and Height for the document.

You can choose mm or inch as the unit for Width and Height.

Scanning

42

2

NOTE (For MFC models) You can load four sizes of document in the ADF: A4, Letter, Legal and Folio. When you

scan smaller sized documents, use the scanner glass.

(For MFC models) You can scan a page of Folio size paper using the ADF. Choose Legal size.

You can see the actual paper size you chose on the screen.

Width: shows the width of the scanning area.

Height: shows the height of the scanning area.

Data Size: shows the rough data size in Bitmap format. The size will be different for other file formats such as JPEG.

43

3

3

Overview 3

ControlCenter4 is a software utility that lets you quickly and easily access your most used applications. Using ControlCenter4 eliminates the need to manually launch specific applications.

ControlCenter4 has two user interfaces: Home Mode and Advanced Mode.

ControlCenter4 also controls the settings for the SCAN key on the control panel of your Brother machine. For information about how to configure the settings for the SCAN key on the machine, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode.

Home Mode

The Home Mode gives you easy access to your machines main functions. This mode is recommended for most Home office users. See Using ControlCenter4 in Home Mode on page 44.

Advanced Mode

The Advanced Mode gives you more control over the details of your machines functions. You can add up to three customized tabs in your original settings. See Using ControlCenter4 in Advanced Mode on page 59.

Changing the user interface 3

a Click Configuration, and then select Mode Select.

b Select Home Mode or Advanced Mode in the mode dialog box.

ControlCenter4 3

ControlCenter4

44

3

Using ControlCenter4 in Home Mode 3

This section briefly introduces the ControlCenter4 functions in Home Mode. For more details on each

function, click (Help).

1 Scan directly to a file, E-mail or graphics application of your choice.

2 Access the PC-FAX applications available for your device. (For MFC models)

3 Access the settings available to configure your device.

4 Link to Brother Solutions Center, Brother CreativeCenter and the ControlCenter Help file.

5 You can select which machine ControlCenter4 will connect with from the Model drop-down list.

6 You can change the user interface and the ControlCenter4 startup preferences.

7 Access the Help file.

8 Access Brother Status Monitor by clicking the Device Status button.

ControlCenter4

45

3

ControlCenter4 Features for Home Mode users 3

Scan (See Scan tab on page 46.)

See Saving the scanned image on page 49.

See Printing the scanned image on page 49.

See Opening the scanned image with an application on page 50.

See Attaching the scanned data to E-mail on page 50.

PC-FAX (See PC-FAX tab (For MFC models) on page 51.)

See Sending a scanned image on page 52.

See Sending an image file from your computer on page 52.

See Viewing and printing received PC-FAX data on page 53.

Device Settings (See Device Settings tab on page 54.)

See Configuring Remote Setup (For MFC models) on page 55.

See Accessing Address Book (For MFC models) on page 55.

See Configuring Scan key settings on page 56.

Support (See Support tab on page 58.)

See Opening ControlCenter Help on page 58.

See Using Brother Solutions Center on page 58.

See Accessing the Brother CreativeCenter on page 58.

ControlCenter4

46

3

Scan tab 3

There are four scan options: Save, Print, Open with an Application and Send E-mail.

This section briefly introduces the Scan tab function. For more details of each function, click (Help).

1 PC Scan setting area

2 Image viewer

3 Save button

4 Print button

5 Open with an Application button

6 Send E-mail button

ControlCenter4

47

3

File types 3

You can choose from the following list of file types when saving to a folder.

For Save and Send E-mail 3

Windows Bitmap (*.bmp)

JPEG (*.jpg) - Recommended for most users when scanning pictures.

TIFF (*.tif)

TIFF Multi-Page (*.tif)

Portable Network Graphics (*.png)

PDF (*.pdf) - Recommended for scanning and sharing documents.

High Compression PDF (*.pdf) 1

Secure PDF (*.pdf)

XML Paper Specification (*.xps) 1 In order to save the document as a High Compression PDF, you must set the Resolution to 300 x 300 dpi and Scan Type to True Grey or

24bit Colour.

NOTE The XML Paper Specification is available for Windows Vista, Windows 7 and Windows 8, or when

using applications that support XML Paper Specification files.

If you set the file type to TIFF or TIFF Multi-Page, you can choose Uncompressed or Compressed.

When you use the scanner glass to scan a multiple page document, check Continuous Scanning and follow the on-screen instructions.

Document Size 3

You can choose the document size from the drop-down list. If you choose a 1 to 2 document size, such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.

ControlCenter4

48

3

Advanced Settings 3

You can configure advanced settings by choosing Custom and then click Custom Settings. The Custom Scan Settings dialog box will appear. Click Advanced Settings and the Advanced Settings dialog box will appear.

You can also configure advanced settings by clicking the Advanced Settings button in the scan settings dialog box.

Remove Background Colour

Removes the base colour of documents to make the scanned data more recognizable. When you use this function, you can select the level from 3 settings: High, Medium and Low.

ControlCenter4

49

3

Saving the scanned image 3

The (Save) button lets you scan an image to a folder on your hard disk as one of the file types shown

in the file types list.

a Configure the settings in the PC Scan setting area.

b Click (Scan).

c Confirm and edit (if necessary) the scanned image in the image viewer.

d Click (Save).

e The Save dialog box will appear. Select your Destination Folder and other settings. Click OK.

f The image will be saved in your chosen folder.

Printing the scanned image 3

You can scan a page on the machine and print copies using any of the features of ControlCenter4 supported by your Brother machines printer driver.

a Select the Scan tab.

b Configure the settings in the PC Scan setting area.

c Click (Scan).

d Confirm and edit (if necessary) the scanned image in the image viewer.

e Click (Print).

f Configure the print settings and then click (Start Printing).

ControlCenter4

50

3

Opening the scanned image with an application 3

The (Open with an Application) button lets you scan an image directly into your graphics application

for image editing.

a Select the Scan tab.

b Configure the settings in the PC Scan setting area.

c Click (Scan).

d Confirm and edit (if necessary) the scanned image in the image viewer.

e Click (Open with an Application).

f Select the application from the drop-down list and click OK.

g The image will appear in the application you have chosen.

Attaching the scanned data to E-mail 3

The (Send E-mail) button lets you scan a document to your default E-mail application, so you can send

the scanned job as an attachment.

a Select the Scan tab.

b Configure the settings in the PC Scan setting area.

c Click (Scan).

d Confirm and edit (if necessary) the scanned image in the image viewer.

e Click (Send E-mail).

f Configure the attached file settings and click OK.

g Your default E-mail application will open and the image will be attached to a new, blank E-mail.

NOTE Webmail services are not supported by Scan to E-mail.

ControlCenter4

51

3

PC-FAX tab (For MFC models) 3

This section briefly introduces the PC-FAX tab function. For more details of each function, click (Help).

NOTE The PC-FAX software can only send Black & White fax documents in A4 size.

1 Send Image File button

2 Send Scanned Image button

3 View Received PC-FAX button

4 PC Scan setting area

5 Scan Image area

6 Send button

ControlCenter4

52

3

Sending an image file from your computer 3

The Send Image File button lets you send an image file as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab.

b Click Send Image File.

c Click on the folder tree to browse for the folder where the image you want to send is located. Then select the file you want to send.

d Click (Send).

e The PC-FAX sending dialog box will appear. Enter a fax number and click . Then click

Start.

Sending a scanned image 3

The Send Scanned Image button lets you scan a page or document and automatically send the image as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab.

b Click Send Scanned Image.

c Configure the settings in the PC Scan setting area.

d Click (Scan).

e Confirm and edit (if necessary) the scanned image in the image viewer.

f Click (Send).

g The PC-FAX sending dialog box will appear. Enter a fax number and click . Then click

Start.

ControlCenter4

53

3

Viewing and printing received PC-FAX data 3

The View Received PC-FAX button lets you view and print received fax data using the Brother PC-FAX software. Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control panel menu of the Brother machine. (See Enabling PC-FAX Receiving software on your machine on page 92.)

a Select the PC-FAX tab.

b Click View Received PC-FAX.

c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received

data will appear. To view the data, select the data and click (View).

d If you want to print the received data, select the data and then click (Print).

e Configure the print settings and then click (Start Printing).

ControlCenter4

54

3

Device Settings tab 3

This section briefly introduces the Device Settings tab function. For more details of each function, click

(Help).

1 Remote Setup button

2 Address Book button

3 Device Scan Settings button

ControlCenter4

55

3

Configuring Remote Setup (For MFC models) 3

The Remote Setup button lets you open the Remote Setup application window to configure most machine setting menus.

a Select the Device Settings tab.

b Click Remote Setup.

c The Remote Setup application window will appear. For Remote Setup configuration, see Remote Setup (For MFC models) on page 75.

Accessing Address Book (For MFC models) 3

The Address Book button lets you open the Address Book window in the Remote Setup application. You can then easily register or change the Address Book numbers on your machine from your computer.

a Select the Device Settings tab.

b Click Address Book.

c The Address Book window will appear. For Address Book configuration, see Remote Setup (For MFC models) on page 75.

ControlCenter4

56

3

Configuring Scan key settings 3

The Device Scan Settings button lets you configure your machines SCAN key settings.

There are three scan functions which you can configure to fit your scanning needs.

To configure each scan function, select the Device Settings tab and then click Device Scan Settings. The Device Scan Settings dialog box will appear.

Image tab 3

Lets you configure settings for Scan to Image by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, Target Application, Destination File Path, File size, Resolution, Scan Type, Document Size, Brightness and Contrast as needed. Click OK.

If you choose Secure PDF (*.pdf) from the File Type drop-down list, click (Set PDF Password). The Set PDF Password dialog box will appear. Type your password in the Password and Re-type Password boxes and then click OK.

NOTE Secure PDF (*.pdf) is also available for Scan to E-mail and Scan to File.

You can change the data compression ratio of the scanned image with File size.

ControlCenter4

57

3

E-mail tab 3

Lets you configure settings for Scan to E-mail by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, Destination File Path, File size, Resolution, Scan Type, Document Size, Brightness and Contrast as needed. Click OK.

NOTE You can change the data compression ratio of the scanned image with File size.

File tab 3

Lets you configure settings for Scan to File by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, File Name, Destination Folder, Show Folder, File size and Insert Date in File Name as needed. Click OK.

NOTE If Show Folder is checked, the destination of the scanned image will be shown after scanning.

You can change the data compression ratio of the scanned image with File size.

ControlCenter4

58

3

Support tab 3

This section briefly introduces the Support tab function. For more details of each function, click (Help) in ControlCenter4.

Opening ControlCenter Help 3

The ControlCenter Help lets you open the Help file for detailed information about ControlCenter.

a Select the Support tab.

b Click ControlCenter Help.

c The ControlCenter Help top page will appear.

Using Brother Solutions Center 3

The Brother Solutions Center button lets you open the Brother Solutions Center website offering information about your Brother product including FAQs (Frequently Asked Questions), Users Guides, driver updates and tips for using your machine.

a Select the Support tab.

b Click Brother Solutions Center.

c The Brother Solutions Center website will be shown in your web browser.

Accessing the Brother CreativeCenter 3

The Brother CreativeCenter button lets you access our website for free and easy online solutions for business and home users.

a Select the Support tab.

b Click Brother CreativeCenter. ControlCenter4 will launch your web browser and then open the Brother CreativeCenter website.

ControlCenter4

59

3

Using ControlCenter4 in Advanced Mode 3

This section briefly introduces the ControlCenter4 functions in Advanced Mode. For more details on each

function, click (Help).

1 Scan directly to a file, E-mail or graphics application of your choice.

2 Access the PC-Copy feature available via your PC.

3 Access the PC-FAX applications available for your device. (For MFC models)

4 Access the settings available to configure your device.

5 Link to Brother Solutions Center, Brother CreativeCenter and the ControlCenter Help file.

6 You can configure your original settings tab by right clicking the tab area.

7 You can select which machine ControlCenter4 will connect with from the Model drop-down list.

8 You can open the configuration window for each scan function and change the user interface mode.

9 Access the Help file.

10 Access Brother Status Monitor by clicking the Device Status button.

ControlCenter4

60

3

ControlCenter4 Features for Advanced Mode users 3

Scan (See Scan tab on page 61.)

See Opening the scanned image with an application on page 62.

See Attaching the scanned data to E-mail on page 62.

See Saving the scanned image on page 62.

See How to change the default settings of each button on page 63.

PC-Copy (See PC-Copy tab on page 64.)

See Printing the scanned image on page 64.

PC-FAX (See PC-FAX tab (For MFC models) on page 65.)

See Sending an image file from your computer on page 65.

See Sending a scanned image on page 65.

See Viewing and printing received PC-FAX data on page 66.

Device Settings (See Device Settings tab on page 67.)

See Configuring Remote Setup (For MFC models) on page 67.

See Accessing Address Book (For MFC models) on page 67.

See Configuring Scan key settings on page 68.

Support (See Support tab on page 70.)

See Using Brother Solutions Center on page 70.

See Opening ControlCenter Help on page 70.

See Accessing the Brother CreativeCenter on page 70.

Custom (See Custom tab on page 71.)

See Creating a Custom tab on page 71.

See Creating a Custom button on page 72.

ControlCenter4

61

3

Scan tab 3

There are three scan options: Image, E-mail and File.

This section briefly introduces the Scan tab function. For more details of each function, click (Help).

1 PC Scan setting area

2 Image button

3 E-mail button

4 File button

File types 3

You can choose a file type to save the scanned images as. For details, see File types on page 47.

Document Size 3

You can choose the document size from the drop-down list. If you choose a 1 to 2 document size, such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.

Advanced Settings 3

You can configure advanced settings. For details, see Advanced Settings on page 48.

ControlCenter4

62

3

Opening the scanned image with an application 3

The (Image) button lets you scan an image directly into your graphics application for image editing.

a Select the Scan tab.

b Click (Image). The Scan Settings dialog box appears.

c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned image, check the PreScan box.

d Click Scan. The image will appear in the application you have chosen.

Attaching the scanned data to E-mail 3

The (E-mail) button lets you scan a document to your default E-mail application, so you can send the

scanned job as an attachment.

a Select the Scan tab.

b Click (E-mail). The Scan Settings dialog box appears.

c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned image, check the PreScan box.

d Click Scan. Your default E-mail application will open and the image will be attached to a new E-mail.

NOTE The E-mail feature does not support Webmail services.

Saving the scanned image 3

The (File) button lets you scan an image to a folder on your hard disk in one of the file types shown in

the file attachment list.

a Select the Scan tab.

b Click (File). The Scan Settings dialog box appears.

c You can configure the scan settings in this dialog box. If you want to preview and configure the scanned image, check the PreScan box.

d Click Scan. The image will be saved in the folder you have chosen.

ControlCenter4

63

3

How to change the default settings of each button 3

You can change the default settings of the (Image), (E-mail) and (File) buttons.

a Right-click the button that you want to configure and click Button settings. The settings dialog box will appear.

b Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness, Contrast and Continuous Scanning as needed.

c Click OK. The new settings will be used as the default settings.

NOTE To preview and configure the scanned image, check PreScan in the settings dialog box.

ControlCenter4

64

3

PC-Copy tab 3

Printing the scanned image 3

You can scan a page on the machine and print copies using any of the features of ControlCenter4 supported by your Brother machines printer driver.

a Select the PC-Copy tab.

b If you want to change the scan settings, right-click the button you want to change and then change the settings. If you want to preview and configure the scanned image, check PreScan. Click OK.

c Click Monochrome Copy, 2 in 1 Copy or 4 in 1 Copy. You can customize each button with your custom settings.

d The scanned image will be printed.

ControlCenter4

65

3

PC-FAX tab (For MFC models) 3

This section briefly introduces the PC-FAX tab function. For more details of each function, click (Help).

NOTE The PC-FAX software can only send Black & White fax documents in A4 size.

Sending an image file from your computer 3

The (Send Image File) button lets you send an image file as a fax from your computer using the Brother

PC-FAX software.

a Select the PC-FAX tab.

b Click (Send Image File).

c Click on the folder tree to browse for the folder where the image you want to send is located. Then select the file you want to send.

d Click (Send). The PC-FAX sending dialog box will appear.

e Enter a fax number and click . Then click Start.

Sending a scanned image 3

The (Send Scanned Image) button lets you scan a page or document and automatically send the image

as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab.

b If you want to change the scan settings, right-click (Send Scanned Image) and then change the

settings. If you want to preview and configure the scanned image, check PreScan. Click OK.

c Click (Send Scanned Image). The PC-FAX sending dialog box will appear.

d Enter a fax number and click . Then click Start.

ControlCenter4

66

3

Viewing and printing received PC-FAX data 3

The (View Received PC-FAX) button lets you view and print received fax data using the Brother

PC-FAX software. Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control panel menu of the Brother machine. (See Enabling PC-FAX Receiving software on your machine on page 92.)

a Select the PC-FAX tab.

b Click (View Received PC-FAX).

c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received

data will appear. To view the data, select the data and click (View).

d If you want to print the received data, select the data and then click (Print).

e Configure the print settings and then click (Start Printing).

ControlCenter4

67

3

Device Settings tab 3

This section briefly introduces the Device Settings tab function. For further information on each function,

click (Help).

Configuring Remote Setup (For MFC models) 3

The (Remote Setup) button lets you open the Remote Setup application window to configure most

machine setting menus.

a Select the Device Settings tab.

b Click (Remote Setup). The Remote Setup application window will appear.

c For Remote Setup configuration, see Remote Setup (For MFC models) on page 75.

Accessing Address Book (For MFC models) 3

The (Address Book) button lets you open the Address Book window in the Remote Setup application.

You can then easily register or change the Address Book numbers on your machine from your computer.

a Select the Device Settings tab.

b Click (Address Book). The Address Book window will appear.

c For Address Book configuration, see Remote Setup (For MFC models) on page 75.

ControlCenter4

68

3

Configuring Scan key settings 3

The (Device Scan Settings) button lets you configure your machines SCAN key settings.

There are three scan functions which you can configure to fit your scanning needs.

To configure each scan function, select the Device Settings tab and then click Device Scan Settings. The Device Scan Settings dialog box will appear.

Image tab 3

Lets you configure settings for Scan to Image by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, Target Application, Destination File Path, File size, Resolution, Scan Type, Document Size, Brightness and Contrast as needed. Click OK.

If you choose Secure PDF (*.pdf) from the File Type drop-down list, click (Set PDF Password). The Set PDF Password dialog box will appear. Type your password in the Password and Re-type Password boxes and then click OK.

NOTE Secure PDF (*.pdf) is also available for Scan to E-mail and Scan to File.

You can change the data compression ratio of the scanned image with File size.

ControlCenter4

69

3

E-mail tab 3

Lets you configure settings for Scan to E-mail by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, Destination File Path, File size, Resolution, Scan Type, Document Size, Brightness and Contrast as needed. Click OK.

NOTE You can change the data compression ratio of the scanned image with File size.

File tab 3

Lets you configure settings for Scan to File by pressing the SCAN key on your Brother machine.

Choose the settings for File Type, File Name, Destination Folder, Show Folder, File size and Insert Date in File Name as needed. Click OK.

NOTE If Show Folder is checked, the destination of the scanned image will be shown after scanning.

You can change the data compression ratio of the scanned image with File size.

ControlCenter4

70

3

Support tab 3

This section briefly introduces the Support tab function. For more details of each function, click (Help) in ControlCenter4.

Opening ControlCenter Help 3

The (ControlCenter Help) lets you open the Help file for detailed information about ControlCenter.

a Select the Support tab.

b Click (ControlCenter Help).

c The ControlCenter Help top page will appear.

Using Brother Solutions Center 3

The (Brother Solutions Center) button lets you open the Brother Solutions Center website offering

information about your Brother product including FAQs (Frequently Asked Questions), Users Guides, driver updates and tips for using your machine.

a Select the Support tab.

b Click (Brother Solutions Center).

c The Brother Solutions Center website will be shown in your web browser.

Accessing the Brother CreativeCenter 3

The (Brother CreativeCenter) button lets you access our website for easy online solutions for business

and home users.

a Select the Support tab.

b Click (Brother CreativeCenter). ControlCenter4 will launch your web browser and then open the

Brother CreativeCenter website.

ControlCenter4

71

3

Custom tab 3

This section briefly introduces adding a Custom tab. For more details, click (Help) .

Creating a Custom tab 3

You can create up to three customized tabs including up to five customized buttons with your custom settings.

a Click Configuration and then select Create custom tab.

ControlCenter4

72

3

Creating a Custom button 3

a Click Configuration and then select Create custom button. Select a button you want to create from the menu. The settings dialog box will appear.

b Enter the button name and change the settings if necessary. Click OK. (The setting options vary depending on the created button.)

NOTE You can change or remove the created tab, button or settings. Click Configuration and follow the menu.

ControlCenter4

73

3

Changing the Scan key settings for Scan to PC menu 3

You can change your machines SCAN key settings for Scan to PC using ControlCenter4.

a Open ControlCenter4. Do one of the following:

(For Windows XP, Windows Vista and Windows 7) Click Start/All Programs/Brother/MFC-XXXX (where MFC-XXXX is your model name)/ControlCenter4.

(For Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not

already selected). Click SCAN in the left navigation bar, and then click ControlCenter4.

b Make sure the machine you want to use is selected from the Model drop-down list.

c Click the Device Settings tab.

d Click Device Scan Settings.

ControlCenter4

74

3

e Choose the File tab. You can change the default settings.

1 You can choose the file type from the drop-down list.

2 You can enter the file name you want to use for the document.

3 You can save the file to the default folder, or choose your preferred folder by clicking the (Browse) button.

4 You can choose a scanning resolution from the Resolution drop-down list.

5 You can choose the document size from the Document Size drop-down list.

f Click OK.

1

2

4

5

3

75

4

4

Remote Setup 4

The Remote Setup application lets you configure many machine settings. When you start this application, the settings on your machine will be downloaded automatically to your PC and displayed on your PC screen. If you change the settings, you can upload them directly to the machine.

Do one of the following:

(Windows XP, Windows Vista and Windows 7)

Click the Start button, All Programs, Brother, MFC-XXXX and Remote Setup.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not already

selected). Click Tools in the left navigation bar, and then click Remote Setup.

OK

Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK.

Cancel

Lets you exit the Remote Setup application without uploading data to the machine.

Remote Setup (For MFC models) 4

Remote Setup (For MFC models)

76

4

Apply

Lets you upload data to the machine without exiting the Remote Setup application.

Print

Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine and then click Print.

Export

Lets you save the current configuration settings to a file.

Import

Lets you read the settings from a file.

NOTE You can use the Export button to save your address book or all settings for the machine.

If you are using Windows Firewall and you installed MFL-Pro Suite from the installer CD-ROM, the necessary Firewall settings have already been made.

77

5

5

PC-FAX sending 5

The Brother PC-FAX feature lets you use your PC to send a document from an application as a standard fax. You can send a file created in any application on your PC as a PC-FAX. You can even attach a cover page. All you have to do is set up the receiving parties as members or groups in your PC-FAX Address Book or simply enter the destination address or fax number into the user interface. You can use the Address Book Search feature to quickly find members to send to.

For the latest information and updates on the Brother PC-FAX feature, visit http://solutions.brother.com/.

NOTE The PC-FAX software can only send Black & White fax documents in A4 size.

Sending a file as a PC-FAX 5

a Create a file in any application on your PC.

b Click File, then Print. The Print dialog box appears:

c Choose Brother PC-FAX as your printer, and then click Print. The PC-FAX sending dialog box appears:

Brother PC-FAX Software (For MFC models) 5

Brother PC-FAX Software (For MFC models)

78

5

d Enter a fax number using one of the following methods:

Use the dial pad to enter the number and then click .

Click the Address Book button, and then choose a member or group from the Address Book.

If you make a mistake, click All Clear to delete all the entries.

e To include a cover page, check Add Cover Page.

NOTE You can click to edit a cover page.

f Click Start to send the fax.

NOTE If you want to cancel the fax, click Cancel.

If you want to redial a number, click Redial to cycle through the last five fax numbers, and then click Start.

Brother PC-FAX Software (For MFC models)

79

5

Setting up user information 5

NOTE

You can access User Information from the PC-FAX sending dialog box by clicking .

(See Sending a file as a PC-FAX on page 77.)

a Do one of the following:

(Windows XP, Windows Vista and Windows 7) Click the Start button, All Programs, Brother, MFC-XXXX, PC-FAX Sending, then PC-FAX Setup.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not

already selected). Click PC-FAX Send in the left navigation bar, and then click PC-FAX Setup.

The PC-FAX Setup dialog box appears:

b Enter this information to create the fax header and cover page.

c Click OK to save the User Information.

NOTE You can set up the User Information separately for each Windows account.

Brother PC-FAX Software (For MFC models)

80

5

Sending setup 5

From the PC-FAX Setup dialog box, click the Sending tab to display the screen below.

Outside line access

You can enter a number to access an outside line. This is sometimes required by local PBX telephone systems (for example, dialling 9 to get an outside line in your office). For PC-Fax send, this number will be applied and the Dial Prefix set in the function menu will be ignored.

Include header

To add the header information you entered in the User Information tab to the top of your sent faxes, check the Include header box. (See Setting up user information on page 79.)

Brother PC-FAX Software (For MFC models)

81

5

Setting up a cover page 5

From the PC-FAX sending dialog box, click to access the Brother PC-FAX Cover Page Setup screen.

The Brother PC-FAX Cover Page Setup dialog box appears:

Brother PC-FAX Software (For MFC models)

82

5

Entering cover page information 5

NOTE If you are sending a fax to more than one recipient, the recipient information will not be printed on the cover page.

To

Choose the recipient information you want to add to the cover page.

From

Choose the sender information you want to add to the cover page.

Comment

Enter the comment you want to add to the cover page.

Form

Choose the cover page format you want to use.

Cover page title

If you choose Custom, you can put a bitmap file, such as your company logo, on the cover page.

Use the Browse button to choose the BMP file, and then choose the alignment style.

Count cover page

Check Count cover page to include the cover page in the page numbering.

Brother PC-FAX Software (For MFC models)

83

5

Address Book 5

If Outlook, Outlook Express, or Windows Mail is installed on your PC, you can choose in the Select Address Book drop-down list which address book to use for PC-FAX sending.

Click the Browse button to choose the database file.

You can use the address book you have chosen in the Select Address Book drop-down list by clicking the Address Book button in the FAX Sending dialog box.

Windows Contacts 5

NOTE To use your Outlook Address Book, you must select Microsoft Outlook 2000, 2002, 2003, 2007 or 2010

as your default E-mail application.

For Microsoft Outlook 2010, the 64-bit version is not supported.

Brother PC-FAX Software (For MFC models)

84

5

Brother Address Book 5

a Do one of the following:

(Windows XP, Windows Vista and Windows 7) Click the Start button, All Programs, Brother, MFC-XXXX (where XXXX is your model name), PC-FAX Sending, then PC-FAX Address Book.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not

already selected). Click PC-FAX Send in the left navigation bar, and then click PC-FAX Address Book.

The Address Book dialog box appears:

Brother PC-FAX Software (For MFC models)

85

5

Setting up a member in the Address Book 5

In the Address Book dialog box you can add, edit and delete members and groups.

a In the Address Book dialog box, click to add a member.

The Address Book Member Setup dialog box appears:

b In the Address Book Member Setup dialog box, enter the members information. Name is a required field. Click OK to save the information.

Brother PC-FAX Software (For MFC models)

86

5

Setting up a group for broadcasting 5

You can create a group to send the same PC-FAX to several recipients at one time.

a In the Address Book dialog box, click to create a Group.

The Address Book Group Setup dialog box appears:

b Enter the name of the new group in the Group Name field.

c In the Available Names box, choose each member to be included in the group, and then click Add >>. Members added to the group appear in the Group Members box.

d After all the members you want have been added, click OK.

NOTE You can have up to 50 members in a group.

Editing member information 5

a Choose the member or group you want to edit.

b Click .

c Change the member or group information.

d Click OK.

Brother PC-FAX Software (For MFC models)

87

5

Deleting a member or group 5

a Choose the member or group you want to delete.

b Click .

c When the confirmation dialog box appears, click OK.

Brother PC-FAX Software (For MFC models)

88

5

Exporting the Address Book 5

You can export the whole Address Book to an ASCII text file (*.csv). You can also create a vCard for an address book member that can be attached to an outgoing E-mail (a vCard is an electronic business card that contains the senders contact information). You can also export the Address Book as Remote Setup Dial Data that can be used by the Remote Setup application of your machine. (See Remote Setup on page 75.) If you are creating a vCard, you must first click on the address book member you want to create the vCard for.

Exporting Address Book entries 5

NOTE If you are creating a vCard, you must first choose the member.

If you choose vCard in step a, Save as type: will be vCard (*.vcf).

a Do one of the following:

From the Address Book, click File, Export, then Text.

From the Address Book, click File, Export, then vCard and go to step e.

From the Address Book, click File, Export, then Remote Setup Dial Data and go to step e.

b From the Available Items column, choose the data fields you want to export and then click Add >>.

NOTE Choose the items in the order you want them listed.

c If you are exporting to an ASCII file, choose Tab or Comma from Divide Character. This chooses Tab or Comma to separate the data fields.

d Click OK to save the data.

Brother PC-FAX Software (For MFC models)

89

5

e Enter the name of the file, and then click Save.

Brother PC-FAX Software (For MFC models)

90

5

Importing to the Address Book 5

You can import ASCII text files (*.csv), vCards (electronic business cards) or Remote Setup Dial Data into your Address Book.

Importing an ASCII text file 5

a Do one of the following:

From the Address Book, click File, Import, then Text.

From the Address Book, click File, Import, then vCard and go to step e.

From the Address Book, click File, Import, then Remote Setup Dial Data and go to step e.

b From the Available Items column, choose the data fields you want to import, and click Add >>.

NOTE From the Available Items list choose the fields in the same order they are listed in the imported text file.

c Choose Tab or Comma based on the file format you are importing from Divide Character.

d Click OK to import the data.

e Enter the name of the file, and then click Open.

NOTE If you chose Text file in step a, Files of type: will be Text files (*.txt; *.csv).

Brother PC-FAX Software (For MFC models)

91

5

PC-FAX receiving 5

The Brother PC-FAX Receive Software lets you view and store faxes on your PC. It is automatically installed when you install the MFL-Pro Suite and works on locally connected machines.

When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will automatically be sent to your PC.

If you turn your PC off, your machine will continue to receive and store your faxes in its memory. The machine LCD will display the number of stored faxes received, for example:

PC Fax Msg:001

When you switch your PC on, the PC-FAX Receive Software automatically transfers your faxes to your PC.

To enable the PC-FAX Receive Software, do the following:

Before you use the PC-FAX Receive function, you must choose PC-FAX Receive from the menu on the machine.

Run the Brother PC-FAX Receive software on your PC. (We recommend you select the Add to Startup folder check box, so that the software automatically runs and can transfer any faxes on PC startup.)

NOTE The PC-FAX software can only receive Black & White fax documents.

Brother PC-FAX Software (For MFC models)

92

5

Enabling PC-FAX Receiving software on your machine 5

You can optionally enable the Backup Print feature. When enabled, the machine will print a copy of the fax before the fax is sent to the PC or the PC is switched off.

a Press Menu.

b Press a or b to choose Fax. Press OK.

c Press a or b to choose Remote Fax Opt. Press OK.

d Press a or b to choose PC Fax Receive. Press OK.

e Press a or b to choose On. Press OK.

f Confirm the message. Press OK.

g Press a or b to choose Backup Print:On or Backup Print:Off. Press OK.

h Press Stop/Exit.

NOTE If you choose Backup Print:On, the machine will print the fax, so you will have a copy if there is a power failure before it is sent to the PC. The fax messages are automatically erased from your machines memory when they have been successfully printed and sent to your PC. When Backup Print is off, your fax messages are automatically erased from your machines memory when they have been successfully sent to your PC.

Brother PC-FAX Software (For MFC models)

93

5

Running the PC-FAX Receiving software on your PC 5

Do one of the following:

(Windows XP, Windows Vista and Windows 7)

Click the Start button, All Programs, Brother, MFC-XXXX, PC-FAX Receiving and Receive.

(Windows 8)

Click (Brother Utilities), click the drop-down list, and then select your model name (if not already

selected). Click PC-FAX Receive in the left navigation bar, and then click Receive.

The PC-FAX icon appears in your PC tasktray.

Brother PC-FAX Software (For MFC models)

94

5

Setting up your PC 5

a Right-click the PC-FAX icon on your PC tasktray, and then click PC-Fax Rx Setup.

The PC-Fax Rx Setup dialog box appears:

b In Save file to, click the Browse button if you want to change the path where PC-FAX files are saved.

c In File Format, choose .tif or .pdf as the received document format. The default format is .tif.

d To play wave files (.wav sound files) when receiving a fax, check Play wave file when receiving FAX, and enter the path of the wave file.

e To automatically start the PC-FAX receiving software when you start Windows, check Add to Startup folder.

Brother PC-FAX Software (For MFC models)

95

5

Viewing new PC-FAX messages 5

Each time your PC is receiving a PC-FAX, the icon will alternate between and . Once the fax has

been received, the icon will change to . It will change to once the received fax has been viewed.

a Double-click to open the Received Faxes folder.

b Double-click any new faxes to open and view them.

NOTE The subject of the received fax shows the received date and time based on your PC clock. (For example Fax 20-2-2011 16;40;21.tif.)

Section II

Apple Macintosh II

Printing and Faxing 97

Scanning 113

ControlCenter2 125

Remote Setup (For MFC models) 144

97

6

6

Features in the printer driver (Macintosh) 6

This machine supports Mac OS X v10.6.8, 10.7.x, 10.8.x.

NOTE The printer driver for Macintosh is available from the download page for your model on the Brother

Solutions Center (http://solutions.brother.com/).

The screens in this section are from OS X v10.7.x. The screens on your Macintosh will vary depending on your operating system version.

2-sided printing 6

The supplied printer driver supports 2-sided printing.

Guidelines for printing on both sides of the paper 6

If the paper is thin, it may wrinkle.

If the paper is curled, turn over the stack, straighten it and then put it back in the paper tray.

If the paper is not feeding correctly, it may be curled. Remove the paper, straighten it and turn over the stack.

When you use the manual 2-sided function, it is possible that there may be paper jams or poor print quality.

If there is a paper jam: See Users Guide: Paper Jams. If you have a print quality problem: See Users Guide: Improving the print quality.

Manual 2-sided printing 6

The machine prints all the even-numbered pages on one side of the paper first. Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not recommended.

Printing and Faxing 6

Printing and Faxing

98

6

Simultaneous scanning, printing and faxing 6

Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a document into the computer. Fax sending will not be stopped during the computer printing. However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then continues printing when copying or fax receiving has finished.

Choosing page setup options 6

You can set the Paper Size, Orientation and Scale.

a From an application such as TextEdit, click File, then Page Setup. Make sure Brother MFC-XXXX (where XXXX is your model name) is chosen in the Format For pop-up menu. You can change the settings for Paper Size, Orientation and Scale, then click OK.

Printing and Faxing

99

6

b From an application such as TextEdit, click File, then Print to start printing.

(For Mac OS X v10.6.8)

For more page setup options, click the disclosure triangle beside the Printer pop-up menu.

NOTE You can save the current settings as a preset by choosing Save As from the Presets pop-up menu.

Printing and Faxing

100

6

(For OS X v10.7.x to v10.8.x)

For more page setup options, click Show Details.

NOTE You can save the current settings as a preset by choosing Save Current Settings as Preset from the Presets pop-up menu.

Printing and Faxing

101

6

Choosing printing options 6

To control special printing features, choose the options you want to change from the Print dialog box.

Cover Page 6

You can choose the following cover page settings:

Print Cover Page

If you want to add a cover page to your document, use this function.

Cover Page Type

Choose a template for the cover page.

Billing Info

If you want to add the billing information to the cover page, enter text in the Billing Info box.

Printing and Faxing

102

6

Layout 6

Pages per Sheet

The Pages per Sheet selection can reduce the image size of a page by allowing multiple pages to be printed on one sheet of paper.

Layout Direction

When you specify the pages per sheet, you can also specify the direction of the layout.

Border

If you want to add a border, use this function.

Reverse page orientation

Check Reverse page orientation to reverse the data from up to down.

Flip horizontally

Check Flip horizontally to print as a reflection flipped left-to-right.

Printing and Faxing

103

6

Print Settings 6

You can change settings by choosing a setting in the Print Settings list:

Media Type

You can change the media type to one of the following:

Plain Paper

Recycled Paper

Print Quality

You can choose the print quality as follows:

Draft

Normal

Fine

Advanced print settings

When you click the triangle mark (c) beside Advanced, the advanced print settings appear.

Printing and Faxing

104

6

Toner Save Mode

You can conserve toner use with this feature. When you set Toner Save Mode to on, print appears lighter. The default setting is off.

NOTE We do not recommend Toner Save Mode for printing Photo or Greyscale images.

Toner Save Mode is not available when Fine is selected for Print Quality.

Graphics Quality

You can change the print quality as follows:

Graphics

The Graphics mode prioritises contrast. Choose this setting for printing text and figures, such as business and presentation documents. You can represent sharp contrasts between shaded areas.

Text

This is the best mode for printing text documents.

Improve Print Output

This feature allows you to improve a print quality problem.

Reduce Paper Curl

Choose this setting to reduce paper curl.

NOTE This operation will decrease the temperature of the machine's fusing process.

Improve Toner Fixing

Choose this setting to improve toner fixing on paper.

NOTE This operation will increase the temperature of the machine's fusing process.

Density Adjustment

Increase or decrease the print density.

Other Print Options

Skip Blank Page

If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them from printing.

Printing and Faxing

105

6

2-sided Printing 6

Manual 2-sided

Select Paper Handling.

Choose Even Only and print, and then reload the printed paper into the tray (blank side face up). Choose Odd Only and print.

Printing and Faxing

106

6

Removing the Printer driver for Macintosh 6

a Log in as an Administrator.

b From the Apple menu, choose System Preferences. Click Print & Scan 1, then choose the printer you want to remove and remove it by clicking the - button.

c Click Delete Printer. 1 Print & Fax for Mac OS X v10.6.8 users

Printing and Faxing

107

6

Status Monitor 6

The Status Monitor utility is a configurable software tool for monitoring the status of the machine, letting you see error messages at pre-set update intervals. You can check the device status by launching Status Monitor.

a Run the System Preferences, select Print & Scan 1, then choose your machine.

b Click the Options & Supplies.... Select the Utility tab then click Open Printer Utility. The Status Monitor will open.

1 Print & Fax for Mac OS X v10.6.8 users

Updating the machines status 6

If you want the latest machine status while the Status Monitor window is open, click . You can set the

interval at which the software will update the machine status information. Go to the menu bar, Brother Status Monitor and choose Preferences.

Hiding or showing the window 6

After starting the Status Monitor, you can hide or show the window. To hide the window, go to the menu bar, Brother Status Monitor and choose Hide Status Monitor. To show the window, click the Brother Status Monitor icon in the dock.

Printing and Faxing

108

6

Quitting the window 6

Click Brother Status Monitor in the menu bar and then choose Quit Status Monitor from the pop-up menu.

Printing and Faxing

109

6

Sending a fax (For MFC models) 6

You can send a fax directly from a Macintosh application.

NOTE Fax documents will be sent in Black and White only.

a Create a document in a Macintosh application.

b From an application such as TextEdit, click File, then Print.

(For Mac OS X v10.6.8)

For more page setup options, click the disclosure triangle beside the Printer pop-up menu.

Printing and Faxing

110

6

(For OS X v10.7.x to v10.8.x)

For more page setup options, click Show Details.

Printing and Faxing

111

6

c Choose Send Fax from the pop-up menu.

d Choose Facsimile from the Output pop-up menu.

e Enter a fax number in the Input Fax Number box.

f Click Add. The fax number is registered in Destination Fax Numbers.

g Click Print.

Printing and Faxing

112

6

NOTE If you want to send a fax to more than one number, click Add after entering the first fax number. The destination fax numbers will be listed in the dialog box.

113

7

7

Scanning a document using the ICA driver 7

You can scan a document using the ICA driver.

NOTE The ICA driver for Macintosh is available from the download page for your model on the Brother Solutions

Center (http://solutions.brother.com/).

If you dont see your machine in the Print & Fax or Print & Scan list after installing the ICA driver, you can add your machine by clicking the + button.

The screens in this section are from OS X v10.7.x. The screens on your Macintosh will vary depending on your operating system version.

a Connect your Brother machine to the Macintosh using a USB cable.

b Launch Image Capture.

Scanning 7

Scanning

114

7

c Select the machine from the list on the left side of the screen. If you connected the Brother machine and your Macintosh with a USB cable, you will see the machine in the DEVICES area.

NOTE (For OS X v10.7.x to v10.8.x)

If you cannot see the machine in the DEVICES area, point the mouse pointer over the area, and then click Show.

d Place your document in the ADF (for MFC models) or on the scanner glass.

(For OS X v10.7.x)

If you place the document in the ADF, select Document Feeder for Mode and the size of your document for Scan Size.

If you place the document on the scanner glass, select Flatbed for Mode (for MFC models) and the size of your document for Scan Size.

(For OS X v10.8.x)

If you place the document in the ADF, check Use Document Feeder and select the size of your document.

Scanning

115

7

If you place the document on the scanner glass, uncheck Use Document Feeder (for MFC models) and select the size of your document.

NOTE (Mac OS X v10.6.8)

When the Detect Separate Items box is unchecked, the document will be scanned as one item and saved as one file. When the Detect Separate Items box is checked, the program will detect each image and save them as separate files. If the program does not automatically crop the document as you want, you can do it manually by dragging the mouse pointer over the portion you want to scan from the dialog box that can be accessed by clicking on Show Details.

(OS X v10.7.x to v10.8.x)

When the Detect Enclosing Box is selected for Scan Size, the document will be scanned as one item and saved as one file. When the Detect Separate Items is selected for Scan Size, the program will detect each image and save them as separate files. If the program does not automatically crop the document as you want, you can do it manually by dragging the mouse pointer over the portion you want to scan from the dialog box that can be accessed by clicking on Show Details.

e Select the destination folder or destination application for Scan To.

Scanning

116

7

If necessary, you can adjust the following settings in the dialog box by clicking on Show Details. Please note that the item name and assignable value may vary depending on the machine.

Scan Mode: Choose Document Feeder or Flatbed.

Kind: Choose from Color, Black & White or Text.

Resolution: Choose the resolution you want to scan your document at.

Use Custom Size (OS X v10.7.x to v10.8.x): Check this box to customize the document size.

Scan Size or Size: Select the paper size of the document being scanned from the Document Feeder or the scan area from the Flatbed.

Orientation or Rotation Angle: Select the orientation of the document from the Document Feeder or the angle of the scan from the Flatbed.

Auto selection (OS X v10.7.x to v10.8.x): If you check Use Custom Size when using the Flatbed, you can choose the scanner drivers automatic detection features.

Scan To: Choose the destination folder or destination application.

Name: Enter the prefix text used for the name of the scanned image.

Format: Select the file format of the scanned data.

Create single document (Mac OS X v10.6.8): When you choose PDF for the file format, check this box to save all scanned documents as one PDF file.

Combine into single document (OS X v10.7.x to v10.8.x): When you choose PDF or TIFF for the file format, check this box to scan a document as one item and saved as one file.

Image Correction: From the manual setting you can adjust Brightness, Contrast (OS X v10.7.x to v10.8.x only), Tint, Temperature, Threshold and Saturation.

f Click on Scan to start scanning.

Scanning

117

7

Choosing your machine from Print & Scan 7

a Connect your Brother machine to the Macintosh using a USB cable.

b Select System Preferences from the Apple Menu.

c Click Print & Scan (Print & Fax for Mac OS X 10.6.8 users).

d Select the machine from the list on the left side of the screen and click Open Print Queue.

NOTE If you do not see the Scan tab on the screen, remove your machine by clicking the - button from the Print & Fax or Print & Scan list. Then add the machine by clicking the + button.

e Click Scanner.

f Go to step d of Scanning a document using the ICA driver on page 113 to continue. The screens vary depending on the scanning methods you are using.

Scanning

118

7

Scanning a document using the TWAIN driver 7

The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use the Macintosh TWAIN Scanner driver with any applications that support TWAIN specifications.

When you scan a document, you can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass. For more information on loading the documents: See Users Guide: Loading documents.

NOTE The TWAIN driver for Macintosh is available from the download page for your model on Brother Solutions

Center (http://solutions.brother.com/).

The first time you use the Brother TWAIN driver, set it as the default driver. The method of choosing the driver or scanning a document may vary depending on the application you are using.

Scanning a document into your Macintosh 7

There are two ways in which you can scan a page. You can either use the ADF (automatic document feeder) (for MFC models) or the scanner glass.

Scanning a page 7

a Load your document.

b Start your graphics application, and begin a scan operation.

Scanning

119

7

c If necessary, adjust the following settings in the Scanner Setup dialog box:

1 Resolution

2 Scan Type

3 Document Size

4 Adjust Image

Brightness

Contrast

d Click Start. When scanning has finished, the image appears in your graphics application.

1

2

3

4

Scanning

120

7

Pre-Scanning to crop a portion you want to scan 7

You can preview your image and crop unwanted portions before scanning by using the PreScan button.

When you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.

a Load your document.

b Start your graphics application, and begin a scan operation.

c Click PreScan. The image is scanned into your Macintosh and appears in the Scanning Area.

d Drag the mouse pointer over the portion you want to scan.

e Load your document again.

NOTE If you put the document on the scanner glass in step a, skip this step.

f If necessary, adjust the settings for Resolution, Scan Type, Brightness and Contrast in the Scanner Setup dialog box.

g Click Start. This time only the chosen area of the document appears in the application window.

h In your application window, use the options available to refine the image.

Scanning

121

7

Settings in the Scanner window 7

Resolution 7

You can change the scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colour options.

Scan Type 7

Black & White

Use for text or line art images.

Gray (Error Diffusion)

Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey images without using true grey dots. Black dots are put in a specific pattern to give the grey appearance.)

True Gray

Use for photographic images or graphics. This mode is more exact because it uses up to 256 shades of grey.

256 Color

Uses up to 256 colours to scan the image.

Resolution Black & White/ Gray (Error Diffusion)

256 Color True Gray/24bit Color

100 x 100 dpi Yes Yes Yes

150 x 150 dpi Yes Yes Yes

200 x 200 dpi Yes Yes Yes

300 x 300 dpi Yes Yes Yes

400 x 400 dpi Yes Yes Yes

600 x 600 dpi Yes Yes Yes

1200 x 1200 dpi Yes No Yes

2400 x 2400 dpi Yes No Yes

4800 x 4800 dpi Yes No Yes

9600 x 9600 dpi Yes No Yes

19200 x 19200 dpi Yes No Yes

Scanning

122

7

24bit Color

Uses up to 16.8 million colours to scan the image.

Although using 24bit Color creates an image with the most accurate colour reproduction, the image file size will be about three times larger than a file created using the 256 Color option. It requires the most memory and has the longest transfer time.

Document Size 7

Choose one of the following document sizes:

A4 210 x 297 mm

JIS B5 182 x 257 mm

Letter 215.9 x 279.4 mm

Legal 215.9 x 355.6 mm (For MFC models)

A5 148 x 210 mm

JIS B6 128 x 182 mm

A6 105 x 148 mm

Executive 184.1 x 266.7 mm

Business Card 90 x 60 mm

To scan business cards, choose the Business Card size, and then place the business card face down at the top left of the scanner glass.

10 x 15 cm

13 x 20 cm

9 x 13 cm

13 x 18 cm

Postcard 1 100 x 148 mm

Postcard 2 (Double) 148 x 200 mm

Custom

(For DCP models) User adjustable from 8.9 8.9 mm to 215.9 297 mm

(For MFC models) User adjustable from 8.9 8.9 mm to 215.9 355.6 mm

Scanning

123

7

After you choose a custom size, you can adjust the scanning area. Click and hold the mouse button as you drag the mouse to crop the image.

Width: Enter the custom width.

Height: Enter the custom height.

NOTE (For MFC models) You can load four sizes of document from the ADF: A4, Letter, Legal and Folio. When

you scan smaller size documents, use the scanner glass.

(For MFC models) You can scan a page of Folio size paper with ADF. Choose Legal size.

Adjusting the Image 7

Brightness

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average, and is usually suitable for most images.

You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again.

If the image is too dark, set a higher Brightness level and scan the document again.

NOTE The Brightness setting is not available for the 256 Color option.

Contrast

You can increase or decrease the contrast level by moving the slider to the left or right. An increase emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can also enter a value in the box to set the Contrast.

NOTE The Contrast setting is only available if you have set Scan Type to Gray (Error Diffusion), True Gray or 24bit Color.

Scanning

124

7

Reduce Noise

You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise setting is available when using 24bit Color and scan resolutions of 300 300 dpi, 400 400 dpi or 600 600 dpi.

When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the Resolution, Scan Type, Brightness and Contrast to see which setting best suits your needs.

125

8

8

NOTE ControlCenter2 is available from the download page for your model on the Brother Solutions Center

(http://solutions.brother.com/).

The features available to you in ControlCenter2 may vary depending on the model number of your machine.

Using ControlCenter2 8

ControlCenter2 is a software utility that lets you quickly and easily access your often used applications. Using ControlCenter2 eliminates the need to manually launch specific applications. The icon will appear on the

menu bar. To open the ControlCenter2 window, click and choose Open. ControlCenter2 has the

following operations:

1 Scan directly to a file, E-mail or graphics application of your choice.

2 Custom Scan buttons let you configure a button to meet your own application needs.

3 Access the Copy features available via your Macintosh and access the PC-FAX applications available for your device. (Mac OS X v10.6.8)

4 Access the settings available to configure your device.

5 Choose which machine ControlCenter2 will connect with from the Model pop-up menu.

Open the Device Selector window by choosing Other... from the Model pop-up menu.

6 You can also open the configuration window for each function by clicking the Configuration button.

ControlCenter2 8

5

1

6

2 3 4

ControlCenter2

126

8

Turning the AutoLoad feature off 8

If you do not want ControlCenter2 to run automatically each time you start your Macintosh, do the following.

a Click the ControlCenter2 icon in the menu bar and choose Preferences. The ControlCenter2 preference window appears.

b Uncheck Start ControlCenter on computer startup.

c Click OK to close the window.

NOTE The ControlCenter2 application icon is in Macintosh HD/Applications/Brother.

ControlCenter2

127

8

SCAN 8

There are three scan buttons for the Scan to Image, Scan to E-mail and Scan to File operations.

Image (Default: Apple Preview)

Lets you scan a page directly into any graphic viewer/editor application. You can choose the destination

application, such as Adobe Photoshop or any kind of image editing application on your Macintosh.

E-mail (Default: Apple Mail)

Lets you scan a page or document directly into an E-mail application as a standard attachment. You can choose the file type and resolution for the attachment.

File

Lets you scan directly to a disk file. You can change the file type and destination folder, as needed.

ControlCenter2 gives you the ability to configure the SCAN key on your machine and the ControlCenter2 Software button for each scan feature. To configure the SCAN key on your machine choose the Device Button (click each of the ControlCenter buttons while holding down the Ctrl key and choose Device Button) in the configuration menu for each of the SCAN buttons. To configure the Software button in ControlCenter2, choose the Software Button tab (click each of the ControlCenter buttons while holding down the Ctrl key and choose Software Button) in the configuration menu for each of the SCAN buttons.

ControlCenter2

128

8

File types 8

You can choose from the following list of file types for attachments or for saving to a folder.

Choose from the pop-up menu the type of file you want the scanned images to be saved as.

For Image, E-mail and File 8

Windows Bitmap (*.bmp)

JPEG (*.jpg) - Recommended for most users when scanning pictures.

TIFF (*.tif)

TIFF Multi-Page (*.tif)

Portable Network Graphics (*.png)

PDF (*.pdf) - Recommended for scanning and sharing documents.

High Compression PDF (*.pdf) 1

Secure PDF (*.pdf) 1 In order to save the document as a High Compression PDF, you must set the Resolution to 300 x 300 dpi and Scan Type to True Gray or 24bit

Color. In addition, Show Scanner Interface cannot be used.

NOTE If you set the file type to TIFF or TIFF Multi-Page, you can choose Uncompressed or Compressed.

When you use the scanner glass to scan a multiple page document, check Continuous Scanning and follow the on-screen instructions.

Document Size 8

You can choose the document size from the pop-up menu. If you choose a 1 to 2 document size, such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.

ControlCenter2

129

8

Advanced Settings 8

You can configure advanced settings. Click the Advanced Settings button in the scan settings dialog box.

Remove Background Color

Removes the base colour of documents to make the scanned data more recognizable. When you use this function, you can select the level from 3 settings: high, medium, and low.

ControlCenter2

130

8

Image 8

The Scan to Image feature lets you scan an image directly into your graphics application for image editing.

a Select the SCAN tab.

b Click (Image).

The Scan to Image dialog box will appear.

c You can configure the scan settings.

To scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface check box.

To change the application that you want to use, choose the appropriate application from the Target Application pop-up menu. You can add an application to the list by clicking Add. If you want to delete an application, click Delete.

d Click Start Scanning. Your default application will start and display the image.

NOTE If you choose Secure PDF (*.pdf) from the File Type list, the Set PDF Password dialog box will appear. Type your password in the Password and Re-type Password boxes, and then click OK. You can also choose Secure PDF (*.pdf) for Scan to E-mail and Scan to File.

ControlCenter2

131

8

E-mail 8

The Scan to E-mail feature lets you scan a document to your E-mail application, so you can send the scanned document as an attachment.

a Select the SCAN tab.

b Click (E-mail).

The Scan to E-mail dialog box will appear.

c You can configure the scan settings.

To scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface check box.

To change the E-mail application that you want to use, choose the appropriate application from the

E-mail Application pop-up menu. You can add an application to the list by clicking Add 1. If you want to delete an application, click Delete.

1 When you first start ControlCenter2, a default list of compatible E-mail applications will appear in the pop-up menu. If you are having trouble

using a custom application with ControlCenter2, you should choose an application from the list.

d Click Start Scanning. Your default E-mail application will start and the image will be attached to a new E-mail.

NOTE The Scan to E-mail feature does not support Webmail services.

Use the Scan to Image or Scan to File feature to scan a document or picture, and then attach the file of the scanned data to an E-mail message.

ControlCenter2

132

8

File 8

The Scan to File button lets you scan an image to a folder on your hard disk in a supported file format.

Therefore, this feature allows you to easily archive your paper documents.

a Select the SCAN tab.

b Click (File).

The Scan to File dialog box will appear.

c You can configure the scan settings.

To scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface check box.

To change the file name, enter the file name you want to use for the document (up to 100 characters) in the File Name box. When you want to add the date, check Insert Date in File Name. A sequential number will be added when a file with the same name already exists.

Choose the file type for the saved image from the File Type pop-up menu. You can save the file to the default folder, or choose your preferred folder by clicking Browse.

To show where the scanned image is saved when scanning is finished, check the Show Folder check box. If you want to specify the destination of the scanned image every time, check the Show Save As window check box.

d Click Start Scanning. The image will be saved in the folder you have chosen.

ControlCenter2

133

8

CUSTOM SCAN 8

There are four buttons which you can configure to fit your scanning needs.

To customize a button, click the button while holding down the Ctrl key, and the configuration window appears. There are three scan functions: Scan to Image, Scan to E-mail and Scan to File.

Scan to Image

Lets you scan a page directly into any image viewer/editor software. You can choose any image editor application on your Macintosh as a destination.

Scan to E-mail

Attaches the scanned images to an E-mail message. You can also choose the file attachment type and create a quick send list of E-mail addresses chosen from your E-mail address book.

Scan to File

Lets you save a scanned image to any folder on a local or network hard disk. You can also choose the file type to be used.

File types 8

You can choose the file type to save the scanned images. For details, see File types on page 128.

Document Size 8

You can choose the document size from the pop-up menu. If you choose a 1 to 2 document size, such as 1 to 2 (A4), the scanned image will be divided into two A5 size documents.

Advanced Settings 8

You can configure advanced settings. For details, see Advanced Settings on page 129.

User-defined button 8

To customize a button, click the button while holding down the Ctrl key, and the configuration window appears. Follow these guidelines for button configuration.

ControlCenter2

134

8

Scan to Image 8

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the Target Application, File Type, Resolution, Scan Type, Document Size, Continuous Scanning, Show Scanner Interface, Brightness and Contrast settings.

ControlCenter2

135

8

If you choose Secure PDF (*.pdf) from the File Type list, the Set PDF Password dialog box appears. Type your password in the Password and Re-type Password boxes and then click OK.

NOTE Secure PDF (*.pdf) is also available for Scan to E-mail and Scan to File.

ControlCenter2

136

8

Scan to E-mail 8

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

Settings tab

Choose the E-mail Application, File Type, Resolution, Scan Type, Document Size, Continuous Scanning, Show Scanner Interface, Brightness and Contrast settings.

NOTE Webmail services are not supported by Scan to E-mail.

ControlCenter2

137

8

Scan to File 8

General tab

Enter a name in Name for Custom (up to 30 characters) to create the button name.

Choose the type of scan from the Scan Action field.

ControlCenter2

138

8

Settings tab

Choose the file format from the File Type pop-up menu. Save the file to the default folder or choose your preferred folder by clicking the Browse button.

Choose the Resolution, Scan Type, Document Size, Continuous Scanning, Show Scanner Interface, Brightness and Contrast settings and enter the file name if you want to change it.

If you want to specify the destination of the scanned image, check Show Save As window.

If you want to scan and then crop a portion of a page after pre-scanning the document, check the Show Scanner Interface box.

ControlCenter2

139

8

COPY / PC-FAX Sending (Mac OS X v10.6.8, PC-FAX for MFC models only) 8

COPY - Lets you use your Macintosh and any printer driver for enhanced copy operations. You can scan a page on the machine and print the copies using any of the features of the machines printer driver, or you can direct the copy output to any standard printer driver installed on your Macintosh.

PC-FAX - Lets you scan a page or document and automatically send the image as a fax from the Macintosh.

NOTE PC-FAX Receiving is not available for Macintosh.

You can configure your preferred settings on up to four buttons.

The Copy1-Copy4 buttons can be customized to let you use advanced copy and fax functions such as N in 1 printing.

To use the Copy buttons, configure the printer driver by clicking the button while holding down the Ctrl key.

Enter a name in Name for Copy (up to 30 characters).

Choose the Copy Ratio, Resolution, Scan Type, Document Size, Continuous Scanning, Show Scanner Interface, Brightness and Contrast settings to be used.

ControlCenter2

140

8

Before finishing the Copy button configuration, select the Printer. Then choose your print settings from the Presets pop-up menu, and click OK to close the dialog box. Clicking the configured copy button opens the print settings.

For more options click the disclosure triangle beside the Printer pop-up menu.

To copy, click the Print button.

To PC-Fax, click the disclosure triangle beside the Printer pop-up menu and then choose Send Fax from the pop-up menu. (See Sending a fax (For MFC models) on page 109.)

ControlCenter2

141

8

DEVICE SETTINGS 8

You can configure or check the machine settings.

Remote Setup (For MFC models)

Lets you open the Remote Setup application. (See Remote Setup (For MFC models) on page 144.)

Address Book (For MFC models)

Lets you open the Set Address Book window of Remote Setup. (See Remote Setup (For MFC models) on page 144.)

Status Monitor

Allows you to open the Status Monitor Utility.

ControlCenter2

142

8

Remote Setup (For MFC models) 8

The Remote Setup button opens the program window; allowing you to configure the settings of the machine.

NOTE For details, see Remote Setup (For MFC models) on page 144.

ControlCenter2

143

8

Address Book (For MFC models) 8

The Address Book button lets you open the Address Book window in the Remote Setup application, so you can easily register or change the Address Book numbers from your Macintosh.

Status Monitor 8

The Status Monitor button allows you to monitor the status of one device, allowing you to get immediate notification of errors such as a paper jam. (See Status Monitor on page 107.)

144

9

9

Remote Setup 9

The Remote Setup application lets you configure many machine settings. When you access this application, the settings on your machine will be downloaded automatically to your Macintosh and displayed on your Macintosh screen. If you change the settings, you can upload them directly to the machine.

NOTE The Remote Setup application is available from the download page for your model on the Brother

Solutions Center (http://solutions.brother.com/).

The Remote Setup application icon is in Macintosh HD/Applications/Brother.

OK

Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK.

Cancel

Lets you exit the Remote Setup application without uploading data to the machine.

Apply

Lets you upload data to the machine without exiting the Remote Setup application.

Print

Lets you print the chosen items on the machine. You cannot print the data until it is uploaded to the machine. Click Apply to upload the new data to the machine and then click Print.

Remote Setup (For MFC models) 9

Remote Setup (For MFC models)

145

9

Export

Lets you save the current configuration setting to a file.

Import

Lets you read the setting from a file.

NOTE You can use the Export button to save your address book or all settings for the machine.

Section III

Using the Scan key III

Scanning 147

147

10

10

Using the Scan key 10

You can use (SCAN) on the control panel to scan documents into your graphics or E-mail applications

or a folder on your computer.

Before you can use (SCAN), you have to install the Brother MFL-Pro Suite and connect the machine

to your computer. If you installed the MFL-Pro Suite from the included installer CD-ROM then the correct

drivers and ControlCenter4 (Windows) or ControlCenter2 (Macintosh) are installed. Scanning using

(SCAN) follows the configuration on the Device Scan Settings screen of ControlCenter4 or

Device Button tab of ControlCenter2. (For Windows, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode. For Macintosh, see SCAN on page 127.) For details about how to configure the scan settings of ControlCenter4 or ControlCenter2

buttons and to launch the application of your choice using (SCAN), see ControlCenter4 on page 43 or

ControlCenter2 on page 125.

NOTE For Macintosh users, ControlCenter for Macintosh is available from the download page for your model on

the Brother Solutions Center (http://solutions.brother.com/).

The XPS file format is available for Windows Vista, Windows 7 and Windows 8, or when using applications which support XML Paper Specification files.

Scanning 10

Scanning

148

10

Scan to E-mail 10

You can scan either a black and white or colour document into your E-mail application as a file attachment.

a Load your document.

b Press (SCAN).

c Press a or b to choose Scan to PC. Press OK.

d Press a or b to choose E-mail. Press OK.

e Press a or b to choose Start Scan. Press OK.

f Press Start. The machine starts scanning the document, creates a file attachment, and launches your E-mail application, displaying the new message waiting to be addressed.

NOTE Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4 or

Device Button tab of the ControlCenter2 configuration screen.

If you want to change between colour and black and white scanning, choose colour or black and white in the scan type option on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the

ControlCenter2 configuration screen. (For Windows, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode. For Macintosh, see SCAN on page 127.)

If you want to change the default file size for JPEG, PDF or Secure PDF, choose your preferred size by moving the scroll bar on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the ControlCenter2 configuration screen.

Webmail services are not supported by Scan to E-mail.

Scanning

149

10

Scan to Image 10

You can scan either a black and white or colour document into your graphics application for viewing and editing.

a Load your document.

b Press (SCAN).

c Press a or b to choose Scan to PC. Press OK.

d Press a or b to choose Image. Press OK.

e Press a or b to choose Start Scan. Press OK.

f Press Start. The machine starts the scanning process.

NOTE Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4 or

Device Button tab of the ControlCenter2 configuration screen.

If you want to change between colour and black and white scanning, choose colour or black and white in the scan type option on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the

ControlCenter2 configuration screen. (For Windows, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode. For Macintosh, see SCAN on page 127.)

If you want to change the default file size for JPEG, PDF or Secure PDF, choose your preferred size by moving the scroll bar on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the ControlCenter2 configuration screen.

Scanning

150

10

Scan to File 10

You can scan a black and white or a colour document into your computer and save it as a file in a folder of your choice. The file type and specific folder are based on the settings you have chosen in the Device Scan

Settings screen of ControlCenter4 or Scan to File screen of ControlCenter2. (For Windows, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode. For Macintosh, see SCAN on page 127.)

a Load your document.

b Press (SCAN).

c Press a or b to choose Scan to PC. Press OK.

d Press a or b to choose File. Press OK.

e Press a or b to choose Start Scan. Press OK.

f Press Start. The machine starts the scanning process.

NOTE Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4 or

Device Button tab of the ControlCenter2 configuration screen.

If you want to change between colour and black and white scanning, choose colour or black and white in the scan type option on the Device Scan Settings screen of ControlCenter4 or Device Button tab of the

ControlCenter2 configuration screen. (For Windows, see Configuring Scan key settings on page 56 for Home Mode or Configuring Scan key settings on page 68 for Advanced Mode. For Macintosh, see SCAN on page 127.)

If you would like to display the folder window after scanning the document, select Show Folder on the Device Scan Settings screen of ControlCenter4 or the Device Button tab of the ControlCenter2 configuration screen.

If you would like to change the file name of scanned documents, enter the file name in the File Name section on the Device Scan Settings screen of ControlCenter4 or the Device Button tab of the ControlCenter2 configuration screen.

If you want to change the default file size for JPEG, PDF or Secure PDF, choose your preferred size by moving the scroll bar on the Device Scan Settings screen of ControlCenter4 or the Device Button tab of the ControlCenter2 configuration screen.

Index

151

A

A

A

Administrator .......................................................12, 16

B

Brightness Macintosh ............................................................ 116 Windows .............................................................. 40

C

Contrast Macintosh ............................................................ 116 Windows .............................................................. 40

ControlCenter2 Macintosh ............................................................ 125

ControlCenter4 Windows .............................................................. 43

D

Drivers Macintosh

ICA .................................................................... 113 printer .................................................................. 97 TWAIN .............................................................. 118

Windows

printer .................................................................... 2 TWAIN ................................................................ 35 WIA ..................................................................... 26

F

FAX (PC-FAX) Macintosh

sending ............................................................. 109 Windows

address book ...................................................... 84 cover page .......................................................... 81 group ................................................................... 86 receiving ............................................................. 91 sending ............................................................... 77 setup ................................................................... 80

H

Header-Footer Print ............................................12, 15

P

Password .................................................................. 16 Print

Macintosh 2-sided printing ...........................................97, 105 Preset ............................................................... 100 Printer driver ....................................................... 97 Toner Save Mode ............................................. 104

Windows

2-sided printing ...............................................4, 10 Booklet printing ................................................... 10 Print Profiles ....................................................... 19 Printer driver ......................................................... 2 Scaling ................................................................ 12 Toner Save Mode ............................................... 15

R

Remote Setup Macintosh ............................................................. 144 Windows .............................................................. 75

S

Scan Macintosh

ICA driver .......................................................... 113 Resolution ......................................................... 121 TWAIN Compliant ............................................. 118

Windows

Resolution ........................................................... 39 TWAIN Compliant ............................................... 35 WIA Compliant .................................................... 26

Scan key ................................................................. 147 Scan Type

Macintosh 24bit Color ........................................................ 122 256 Color .......................................................... 121 Black & White ................................................... 121 Gray (Error Diffusion) ........................................ 121 True Gray .......................................................... 121

Windows

24bit Colour ........................................................ 40 256 Colour .......................................................... 40 Black & White ..................................................... 39 Grey (Error Diffusion) .......................................... 39 True Grey ............................................................ 39

Status Monitor Macintosh ............................................................. 107 Windows .............................................................. 24

Index

152

A

Support ..................................................................... 21

W

Watermark ..........................................................12, 13

www.brotherearth.com

Visit us on the World Wide Web http://www.brother.com/

These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will

Manualsnet FAQs

If you want to find out how the DCP-1512(E) Brother works, you can view and download the Brother DCP-1512(E) Software User's Guide on the Manualsnet website.

Yes, we have the Software User's Guide for Brother DCP-1512(E) as well as other Brother manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Software User's Guide should include all the details that are needed to use a Brother DCP-1512(E). Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brother DCP-1512(E) Software User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brother DCP-1512(E) Software User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brother DCP-1512(E) Software User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brother DCP-1512(E) Software User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Brother DCP-1512(E) Software User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.