Brother DCP-8085DN Quick Setup Guide PDF

1

Start Here DCP-8080DN DCP-8085DN

Quick Setup Guide

USA/CAN Version A

Before you can use the machine, read this Quick Setup Guide for the correct setup and installation. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.

1 Unpack the machine and check the components

WARNING Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children.

IMPORTANT DO NOT connect the interface cable yet.

Drum Unit Assembly (including Standard Toner

Cartridge)

CD-ROMS (Windows) (Macintosh)

Product Registration Sheet

(USA only)

AC Power Cord Quick Setup Guide Users Guide Accessory Order Form

Note The components included in the box may differ depending on your country. Save all packing materials and the box in case for any reason you must ship your machine. The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you

want to use (USB, Parallel or Network). USB cable Please make sure you use a USB 2.0 cable (Type A/B) that is no longer than 6 feet (2 meters). DO NOT connect the interface cable at this time. Connecting the interface cable is done during MFL-Pro

installation process. When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB

port on a keyboard or non-powered USB hub. Parallel cable DO NOT use a parallel interface cable that is longer than 6 feet (2 meters). Use a shielded interface cable that is IEEE 1284-compliant. Network cable Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

2

Symbols used in this guide

CAUTIONUTION When you move the machine, grasp the side handholds that are under the scanner. DO NOT carry the machine by holding it at the bottom.

WARNINGS tell you what to do to prevent possible personal injury.

CAUTIONS specify procedures you must follow or avoid to prevent possible minor injuries. IMPORTANT describe procedures you must follow or avoid to prevent possible machine problems or machine damage, or damage to other objects.

Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch machine parts that are hot.

Note Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features.

Users Guide Software Users Guide Network Users Guide

Indicates reference to the printed Users Guide, the Software Users Guide or the Network Users Guide. The Software Users Guide and Network Users Guide are located on the supplied CD-ROM.

Note Keep a minimum gap around the machine as shown in the illustration.

WARNING

CAUTION

IMPORTANT

11.8 in. (300 mm)

5.12 in. (130 mm)

7.87 in. (200 mm)

19.68 in. (500 mm)

3

2 Install the drum unit and toner cartridge assembly

a Remove the protective tape and film covering the scanner glass.

b Press the front cover release button and open the front cover a.

c Unpack the drum unit and toner cartridge assembly.

d Gently shake it from side to side several times to distribute the toner evenly inside the assembly.

e Put the drum unit assembly into the machine until it clicks into place.

f Close the front cover of the machine.

IMPORTANT DO NOT connect the interface cable yet.

1

4

3 Load paper in the paper tray

a Pull the paper tray completely out of the machine.

b While pressing the blue paper-guide release lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots.

c Fan the stack of paper well to avoid paper jams and misfeeds.

d Put paper in the tray, and make sure that the paper is below the maximum paper mark a. The side to be printed on must be face down.

e Put the paper tray firmly back in the machine. Make sure that it is completely inserted into the machine.

f Unfold the support flap a to prevent paper from sliding off the face-down output tray.

Note For Legal or Folio size paper, press the release button a in the bottom of the paper tray and then pull out the back of the paper tray. (Legal or Folio size paper are not available in some regions.)

1

1

IMPORTANT Make sure the paper guides touch the sides of the paper so it will feed properly.

1

1

5

4 Release the scanner lock

a Push the lever a in the direction shown to unlock the scanner. (The gray scanner lock lever is located at the back left side, under the document cover b.)

5 Connect the power cord

a Make sure that the machine power switch is off. Connect the AC power cord to the machine.

b Plug the AC power cord into an AC outlet. Turn the power switch on.

6 Choose your language (If needed)

a Press Menu.

b Press 1.

c Press 0.

d Press or to choose your language. Press OK.

e Press Stop/Exit.

7 Set the LCD contrast (If needed)

If you are having difficulty reading the LCD, try changing the contrast setting.

a Press Menu.

b Press 1.

c Press 5.

d Press to increase the contrast.

OR

Press to decrease the contrast. Press OK.

e Press Stop/Exit.

IMPORTANT DO NOT connect the interface cable yet.

Note If Scanner Locked appears on the LCD, immediately release the scanner lock and press Stop/Exit. (See Release the scanner lock on page 5.)

2

1

6

8 Set the date and time

This setting allows the machine to name files created when using the Scan to USB feature.

a Press Menu.

b Press 6.

c Press 1.

d Enter the last two digits of the year on the dial pad, and then press OK.

61.Date&Time

Year:2009

Enter & OK Key

(e.g. Enter 0, 9 for 2009.)

e Enter the two digits for the month on the dial pad, and then press OK.

61.Date&Time XX/XX/2009

Month:03

Enter & OK Key

(e.g. Enter 0, 3 for March.)

f Enter the two digits for the day on the dial pad, and then press OK.

61.Date&Time 03/XX/2009

Day:25

Enter & OK Key

(e.g. Enter 2, 5.)

g Enter the time in 24-hour format on the dial pad, and then press OK.

61.Date&Time 03/25/2009

Time:15:25

Enter & OK Key

(e.g. Enter 1 5, 2 5 for 3:25 P.M.)

h Press Stop/Exit.

9 Automatic Daylight Savings Time

You can set the machine to change automatically for daylight savings time. It will reset itself forward one hour in the Spring and backward one hour in the Fall.

a Press Menu.

b Press 6.

c Press 2.

d Press or to choose On (or Off). Press OK.

e Press Stop/Exit.

7

W indow

s U

SB M acintosh

W

indow s

Parallel W

indow s

M

acintosh

W ired N

etw ork

10 Choose your connection type

For USB Interface Users Windows, go to page 8 Macintosh, go to page 12

For Parallel interface cable Windows, go to page 14

For Wired Network Windows, go to page 18 Macintosh, go to page 23

For Windows Server 2003/ 2008, see the Network Users Guide on the CD-ROM.

8

WindowsUSB

For USB Interface Users (Windows 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista)

11 Before you install

a Make sure that your computer is ON and you are logged on with Administrator rights.

b Turn off and unplug the machine from the AC outlet and disconnect it from your computer, if you already connected an interface cable.

12 Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b The CD-ROM main menu will appear. Click Initial Installation.

c Click Install MFL-Pro Suite.

IMPORTANT DO NOT connect the USB cable yet. If there are any programs running, close

them. Make sure a USB Flash memory device is

not inserted into the machine. The screen may differ depending on the

operating system. The supplied CD-ROM includes ScanSoft

PaperPort 11SE. This software supports Windows 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and Windows Vista. Update to the latest Windows Service Pack before installing MFL-Pro Suite.

Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click Start.exe.

9

WindowsUSB W

indow s

U SB M

acintosh

d When the ScanSoft PaperPort 11SE License Agreement window appears, click Yes if you agree to the Software License Agreement.

e The installation of ScanSoft PaperPort 11SE will automatically start and is followed by the installation of MFL-Pro Suite.

f When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement.

g Choose Local Connection, and then click Next. The installation continues.

h If you do not want to monitor the machine status and error notification from your computer, uncheck Enable Status Monitor and then click Next.

i When this screen appears, go to the next step.

Note If the installation does not continue

automatically, open the main menu again by ejecting and then reinserting the CD-ROM or double-click the Start.exe program from the root folder, and continue from step c to install MFL-Pro Suite.

For Windows Vista, when the User Account Control screen appears, click Allow.

Note If you want to install the PS driver (Brothers BR-Script Driver), choose Custom Install and then follow the on-screen instructions. When the Select Features screen appears, check PS Printer Driver, and then continue following the on-screen instructions.

10

WindowsUSB

13 Connect the USB cable

a Remove the label covering the USB interface connector.

b Connect the USB cable to the USB connector

on the machine marked with the symbol. Then connect the cable to your computer.

14 Connect the power cord

a Plug the AC power cord into an AC outlet. Turn the power switch on.

The installation will continue automatically. The installation screens appear one after another.

b When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next.

IMPORTANT DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub. Connect the machine directly to your

computer.

IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

11

WindowsUSB W

indow s

U SB M

acintosh

15 Finish and restart

a Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights.

b If this screen appears, choose the firmware update setting and click OK.

Note If an error message appears during the software installation, run the Installation Diagnostics located in Start/All Programs/Brother /DCP-XXXX (where DCP-XXXX is your model name).

Note Internet access is required for the firmware upgrade.

Finish The installation is now complete.

Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from the applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/.

12

MacintoshUSB

For USB Interface Users (Mac OS X 10.3.9 or greater)

11 Before you install

a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

12 Connect the USB cable

a Remove the label covering the USB interface connector.

b Connect the USB cable to the USB connector

on the machine marked with the symbol. Then connect the cable to your computer.

13 Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM drive.

b Double-click Start Here OSX to install.

Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software.

IMPORTANT Make sure a USB Flash memory device is not inserted into the machine.

IMPORTANT DO NOT connect the machine to a USB port

on a keyboard or a non-powered USB hub. Connect the machine directly to your

Macintosh.

Note Please see the Software Users Guide on the CD-ROM if you want to install the PS driver. (Brothers BR-Script Driver)

13

MacintoshUSB W

indow s

U SB M

acintosh

c The Brother software will search for the Brother device. During this time the following screen will appear.

d Choose the machine from the list, and then click OK.

e When this screen appears, click OK.

14 Install Presto! PageManager

When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager.

a Double-click Presto! PageManager and follow the on-screen instructions.

The installation of MFL-Pro Suite is now complete. Go to step 14 on page 13.

Finish The installation is now complete.

14

WindowsParallel

For Parallel Interface Users (Windows 2000 Professional/XP/XP Professional x64 Edition)

11 Before you install

a Make sure that your computer is ON and you are logged on with Administrator rights.

b Turn off and unplug the machine from the AC outlet and disconnect it from your computer, if you already connected an interface cable.

12 Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b The CD-ROM main menu will appear. Click Initial Installation.

c Click Install MFL-Pro Suite.

IMPORTANT DO NOT connect the Parallel cable yet. If there are any programs running, close

them. Make sure a USB Flash memory device is

not inserted into the machine. The screen may differ depending on the

operating system. The supplied CD-ROM includes ScanSoft

PaperPort 11SE. This software supports Windows 2000 (SP4 or greater), XP (SP2 or greater) and XP Professional x64 Edition. Update to the latest Windows Service Pack before installing MFL-Pro Suite.

Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click Start.exe.

15

WindowsParallel W

indow s

Parallel

d When the ScanSoft PaperPort 11SE License Agreement window appears, click Yes if you agree to the Software License Agreement.

e The installation of ScanSoft PaperPort 11SE will automatically start and is followed by the installation of MFL-Pro Suite.

f When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement.

g Choose Local Connection, and then click Next. The installation continues.

h If you do not want to monitor the machine status and error notification from your computer, uncheck Enable Status Monitor and then click Next.

i When this screen appears, go to the next step.

Note If the installation does not continue automatically, open the main menu again by ejecting and then reinserting the CD-ROM or double-click the Start.exe program from the root folder, and continue from c to install MFL-Pro Suite.

Note If you want to install the PS driver (Brothers BR-Script Driver), choose Custom Install and then follow the on-screen instructions. When the Select Features screen appears, check PS Printer Driver, and then continue following the on-screen instructions.

16

WindowsParallel

13 Connect the Parallel cable

a Connect the Parallel interface cable to your computer, and then connect it to the machine.

14 Connect the power cord

a Plug the AC power cord into an AC outlet. Turn the power switch on.

The installation will continue automatically. The installation screens appear one after another.

b Do one of the following: For Windows 2000 Professional users, click Next.

For Windows XP/XP Professional x64 Edition users, wait for a while since the installation of the Brother drivers will automatically start. The screens appear one after another.

c When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next.

IMPORTANT Connect the machine directly to your computer.

Note If this screen appears, click OK.

IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

17

WindowsParallel W

indow s

Parallel

15 Finish and restart

a Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights.

b If this screen appears, choose the firmware update setting and click OK.

Note If an error message appears during the software installation, run the Installation Diagnostics located in Start/All Programs/Brother /DCP-XXXX LPT (where DCP-XXXX is your model name).

Note Internet access is required for the firmware upgrade.

Finish The installation is now complete.

Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from the applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/.

18

WindowsWired Network

For Wired Network Interface Users (Windows 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista)

11 Before you install

a Make sure that your computer is ON and you are logged on with Administrator rights.

b Unplug the machine from the AC outlet.

12 Connect the network cable

a Connect the network interface cable to the LAN

connector marked with a symbol and then connect it to a free port on your hub.

13 Connect the power cord

a Plug the AC power cord into an AC outlet. Turn the power switch on.

IMPORTANT If there are any programs running, close

them. Make sure a USB Flash memory device is

not inserted into the machine. The screens may differ depending on the

operating system. The supplied CD-ROM includes ScanSoft

PaperPort 11SE. This software supports Windows 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and Windows Vista. Update to the latest Windows Service Pack before installing MFL-Pro Suite.

IMPORTANT Disable all personal firewall software (other than Windows Firewall), anti-spyware or antivirus applications for the duration of the installation.

19

WindowsWired Network W

indow s

M

acintosh

W ired N

etw ork

14 Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language.

b The CD-ROM main menu will appear. Click Initial Installation.

c Click Install MFL-Pro Suite.

d When the ScanSoft PaperPort 11SE License Agreement window appears, click Yes if you agree to the Software License Agreement.

e The installation of ScanSoft PaperPort 11SE will automatically start and is followed by the installation of MFL-Pro Suite.

f When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement.

Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click Start.exe.

Note If the installation does not continue

automatically, open the main menu again by ejecting and then reinserting the CD-ROM or double-click the Start.exe program from the root folder, and continue from c to install MFL-Pro Suite.

For Windows Vista, when the User Account Control screen appears, click Allow.

20

WindowsWired Network

g Choose Network Connection, and then click Next.

h For Windows XP SP2/XP Professional x64 Edition/ Windows Vista users, when this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

If you are not using the Windows Firewall, see the Users Guide for your software for information on how to add the following network ports.

For network scanning, add UDP port 54925. If you still have trouble with your network connection, add UDP port 137.

i If the machine is configured for your network, choose the machine from the list, and then click Next.

j If you do not want to monitor the machine status and error notification from your computer, uncheck Enable Status Monitor and then click Next.

k The installation of the Brother drivers will automatically start. The installation screens appear one after another.

Note If you want to install the PS driver (Brothers BR-Script Driver), choose Custom Install and then follow the on-screen instructions. When the Select Features screen appears, check PS Printer Driver, and then continue following the on-screen instructions.

Note You can find your machines IP address and

the node name by printing out the Network Configuration List. See Print the Network Configuration List on page 27.

If your machine is not found over the network, following screen will appear.

Confirm your network setting by following the on-screen instructions.

If the machine is not yet configured for use on your network, the following screen appears.

Click OK and then Configure IP Address. Enter an IP address for your machine that is suitable for your network by following the on-screen instructions.

IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.

21

WindowsWired Network W

indow s

M

acintosh

W ired N

etw ork

l When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Once you have completed the registration process, close your web browser to return to this window. Then click Next.

15 Finish and restart

a Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights.

b If this screen appears, choose the firmware update setting and click OK.

Note For Windows Vista, when this screen appears, click the check box and click Install to complete the installation correctly.

Note If an error message appears during the software installation, run the Installation Diagnostics located in Start/All Programs/Brother/ DCP-XXXX LAN (where DCP-XXXX is your model name).

Note Internet access is required for the firmware upgrade.

22

WindowsWired Network

16 Install MFL-Pro Suite on additional computers (If needed)

If you want to use your machine with multiple computers on the network, install MFL-Pro Suite on each computer. Go to step 14 on page 19.

Note The MFL-Pro Suite Software License permits installation on up to 5 network computers. If you want to install MFL-Pro Suite on additional computers, you can purchase additional NL-5 (five user) license agreements from your authorized Brother dealer or contact Brother customer service.

Finish The installation is now complete.

Note XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from the applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/.

23

MacintoshWired Network W

indow s

M

acintosh

W ired N

etw ork

For Wired Network Interface Users (Mac OS X 10.3.9 or greater)

11 Before you install

a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

12 Connect the network cable

a Connect the network interface cable to the LAN

connector marked with a symbol and then connect it to a free port on your hub.

13 Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM drive.

b Double-click Start Here OSX to install.

Please wait, it will take a few seconds for the software to install. After the installation, click Restart to finish installing the software.

c The Brother software will search for the Brother device. During this time the following screen will appear.

IMPORTANT Make sure a USB Flash memory device is not inserted into the machine.

Note Please see the Network Users Guide on the CD-ROM if you want to install the PS driver. (Brothers BR-Script Driver)

24

MacintoshWired Network

d If the machine is configured for your network, choose the machine from the list, and then click OK.

e When this screen appears, click OK.

14 Install Presto! PageManager

When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager.

a Double-click Presto! PageManager and follow the on-screen instructions.

15 Install MFL-Pro Suite on additional computers (If needed)

If you want to use your machine with multiple computers on the network, install MFL-Pro Suite on each computer. Go to step 13 on page 23.

Note You can find your machines IP address and

the node name by printing out the Network Configuration List. See Print the Network Configuration List on page 27.

If your machine is not found over the network, confirm your network setting.

If this screen appears click OK.

Enter a name for your Macintosh in Display Name up to 15 characters long and click OK. Go to e.

If you want to use the machines Scan key to scan over the network, you must check the Register your computer with the Scan To function on the machine box.

The name you enter will appear on the machines LCD when you press and choose a scan option. (For more information, see Network Scanning in the Software Users Guide on the CD-ROM.)

The installation of MFL-Pro Suite is now complete. Go to step 14 on page 24.

Finish The installation is now complete.

25

For Network Users

BRAdmin Light utility (For Windows users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address. For more information on BRAdmin Light, visit us at http://solutions.brother.com/.

Install the BRAdmin Light configuration utility

a Click Network Utilities on the menu screen.

b Click BRAdmin Light and follow the on-screen instructions.

Set your IP address, Subnet Mask and Gateway using BRAdmin Light

a Start BRAdmin Light. It will search for new devices automatically.

b Double-click the unconfigured device.

c Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK.

d The address information will be saved to the machine.

Note If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is available as a download from http://solutions.brother.com/.

Note If you have a DHCP/BOOTP/RARP server in your network, you do not have to do the following operation. The machine will automatically obtain its own IP address.

Note The default password for the machine is access. You can use BRAdmin Light to change this password.

26

For Network Users

BRAdmin Light utility (For Mac OS X users) BRAdmin Light is a utility for initial setup of Brother network connected devices. It also can search for Brother products on your network, view the status and configure basic network settings, such as IP address from a computer running Mac OS X 10.3.9 or greater. The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already installed the printer driver, you do not have to install BRAdmin Light again. For more information on BRAdmin Light, visit us at http://solutions.brother.com/.

Set your IP address, Subnet Mask and Gateway using BRAdmin Light

a Double-click Macintosh HD on your desktop.

b Choose Library, Printers, Brother and then Utilities.

c Double-click the file BRAdmin Light.jar and run the software. BRAdmin Light will then search for new devices automatically.

d Double-click the unconfigured device.

e Choose STATIC for Boot Method. Enter the IP Address, Subnet Mask and Gateway, and then click OK.

f The address information will be saved to the machine.

Note If you have a DHCP/BOOTP/RARP server in

your network, you do not have to do the following operation. The machine will automatically obtain its own IP address.

Make sure that version 1.4.2 or greater of Java client software is installed on your computer.

The default password for the machine is access. You can use BRAdmin Light to change this password.

27

For Network Users

Web Based Management (web browser) The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).

a Open your browser.

b Type http:// printer_ip_address /into your browser (Where printer_ip_address is the IP address of the printer or the print server name). You can find the IP address of the machine on the Network Configuration List. See Print the Network Configuration List on page 27.

For example http://192.168.1.2/

Print the Network Configuration List You can print the Network Configuration List to confirm the current network settings. To print the Network Configuration List:

a Make sure that the front cover is closed and the AC power cord is plugged in.

b Turn on the machine and wait until the machine is in the Ready state.

c Press Menu, 6, 6.

d Press Start. The machine will print the current network settings.

Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.

a Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

b Press Menu, 5, 0.

c Press 1 to choose Reset.

d Press 1 to choose Yes.

e The machine will restart, re-connect cables once this is complete.

Note The User Name is admin and the default

password is access. You can use a web browser to change this password.

We recommend Microsoft Internet Explorer 6.0 (or higher) or Firefox 1.0 (or higher) for Windows and Safari 1.3 for Macintosh. Please also make sure that JavaScript and cookies are always enabled in whichever browser you use. To use a web browser, you will need to know the IP address of the print server. The IP address of the print server is listed on the Network Configuration List.

See Chapter 11 of the Network Users Guide.

Options and Consumables

28

Options

For more details about the optional Lower Tray Unit and compatible SO-DIMM Memory please see the Users Guide or visit http://solutions.brother.com/.

Replacement consumables When the time comes to replace consumable items, an error message will be indicated on the LCD. For more information about the consumables for your machine, visit http://www.brother.com/original/ or contact your local Brother re-seller.

Lower Tray Unit SO-DIMM Memory LT-5300

Second lower paper tray unit can hold up to 250 sheets of paper. When the tray is installed, the machine expands total input capacity up to 550 sheets.

You can expand the memory by installing a (144-pin SO-DIMM) memory module.

Toner cartridge Drum unit TN-620/TN-650 DR-620

Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Multi-Function Link is a registered trademark of Brother International Corporation. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and other countries. Microsoft, Windows and Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United States and other countries. Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.

All other brand and product names mentioned in this manual are trademarks or registered trademarks of their respective companies.

Compilation and Publication Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Copyright and License 2009 Brother Industries, Ltd. This product includes software developed by the following vendors: 1983-1998 PACIFIC SOFTWORKS, INC. This product includes the KASAGO TCP/IP software developed by ELM