Brother P-touch PT-7100 User's Guide PDF

1 of 1
1 of 1

Summary of Content for Brother P-touch PT-7100 User's Guide PDF

2 3PREPARATION OPERATION REFERENCE

[GETTING STARTED]

E L E C T R O N I C L A B E L I N G S Y S T E M

USER'S GUIDE / Espaol

www.brother.com Printed in China

LW3522001

English

With your PT-7100, you can create labels for any application. Select from the many frames, character sizes and styles to design beautiful custom labels. In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colors. Read this manual carefully before starting and keep the manual in a handy place for future reference.

Always use the specified voltage and the suggested AC adapter (AD-24) for this machine to prevent any damage or failure.

Unplug the power cord immediately and stop using the P-touch labeler during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not use the AC adapter in places of high humidity such as bathrooms. Do not overload the power cord. Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend

or pull the power cord. When disconnecting the power cord from the power outlet, always hold the plug.

To prevent fire or electric shock, make sure that the plug is fully inserted to the power outlet. Do not use an outlet that is loose.

Do not get the machine/AC adapter/power plug wet, such as by handling them with wet hands or spilling beverages on to them.

Do not disassemble or modify the machine/AC adapter/batteries. Disconnect the AC adapter, remove batteries and stop using immediately if you notice

any abnormal odor, heat, discoloration, deformation or anything unusual while in use, or in storage.

Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the batteries.

Do not throw into fire or heat up the battery.

To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the print head.

Do not apply excessive pressure to the cutter lever. Remove the batteries and disconnect the AC adapter if you do not intend to use the

machine for an extended period of time. (Note: When power is disconnected for more than two minutes, all text & formats in the display will be lost. Language, Unit and Time/Date settings will also be cleared.)

Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. Otherwise, the batteries may leak or be damaged.

To prevent damage or breakage, do not drop or hit the machine/AC adapter and press on the LCD display.

Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the color of the label may change or be transferred to other objects. Before applying the label, check the environmental condition and the material.

Any data stored in memory will be lost due to failure or repair of the P-touch labeler, or if the battery expires.

Do not use the P-touch labeler in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the machine.

Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark.

Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth.

Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab) when cleaning the print head.

Do not put any foreign objects into the tape exit slot or AC adapter connector, etc. Do not place the P-touch labeler in direct sunlight or rain, near heaters or other hot

appliances, dashboard or in the back of your car, in any location exposed to extremely high or low temperatures, high humidity, or dusty locations. Standard operating temperature range: 50F to 95F (10C to 35C).

Do not try to print labels using an empty tape cassette in the P-touch labeler. Doing so will damage the print head.

Do not pull the tape being fed from the P-touch labeler, otherwise the tape cassette or P-touch labeler may be damaged.

INTRODUCTION

WARNING

CAUTION

General Precautions

1 Power Supply & Tape Cassettes

Open the tape compartment cover by pressing in the rough area at the top end of the machine. If a tape cassette is already installed, remove it by pulling it straight up. Also, if batteries are already installed, remove them. Make sure that the power is

turned off when replacing batteries or tape cassette.

Insert six new AAA alkaline batteries (LR03), making sure that their poles point in the correct directions. Always replace all six batteries at the same time using brand new ones.

Insert a tape cassette, making sure that it snaps into place.

Make sure that the end of the tape feeds under the tape guides. If the ink ribbon is loose, use your finger to wind the toothed wheel in the

direction of the arrow on the cassette. Use only Brother TZ tapes with this machine.

Securely close the back cover, making sure that it snaps into place. After you have installed the tape, feed the tape (see Feeding) once and then push in the tape cutter lever to cut the tape.

When using optional AC adapter (AD-24)

Insert the plug on the adapter cord into the adapter jack on the bottom end of the machine. Insert the plug into the nearest standard electrical outlet.

For memory back up, we recommend using AAA alkaline batteries (LR03) together when using the AC adapter.

Print head

Tape cutter lever

Tape compartment cover

End of tape

Tape guide

Cutter's edge

Toothed Wheel

Tape exit slot

Keyboard & LCD

Initial Settings Start your machine Supply power by using six AAA alkaline batteries or the optional AC adapter, and then press .

Set the language (English/Espaol/Franais/Hrvatski/Italiano/Magyar/ Nedrlnds/Norsk/Polski/Portug./Romn/Slovenski/Slovensky/Suomi/ Svenska/ /Dansk/Deutsch) The default setting is "English".

> [ Language] >

Choose a language with and press .

Set the unit (inch/mm) The default setting is "inch".

> [Unit] >

Choose unit with and press .

Set Date (MM/DD/YY) and Time (hh:mm) Example: setting the clock to October 21st 2009, 10:30AM

> [TimeDate] > [Clock] .

You can also confirm the figure and move to the next setting by using the right cursor key.

The LCD shows one row of 12 characters; however, the text that you enter can be up to 80 characters in length.

Date (MM/DD/YY)

> > >

input 10 input 21 input 09

Time (hh:mm)

> >

input 10 input 30

Select AM/PM with and press .

The machine automatically turns off if no keys are pressed within 5 minutes.

To cancel operations, press .

To initialize the settings, turn off the machine and then while

holding down and , press to turn the machine back

on. Finally, release and .

Size

Cursor

Caps

Power key

Function key

Character key

Clear key

Caps key Symbol key

Width

Style

Underline/Frame Label Length

Print key

Cursor key Backspace key

Enter key

Accent key Space key

Time/Date key

Number key

Troubleshooting Error message

What to do when...

Specifications

Accessories (Supplies may differ by distribution.)

If the cutter blade becomes blunt and the cutter stopper wear after repetitive use and the tape cannot be cut cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an authorized brother reseller.

Message Cause/Remedy Battery The batteries are weak. Replace them with new ones. BATTERY! The installed batteries are about to run out. Invalid There is no text above the cursor when you set Numbering.

Invalid character is selected for Numbering. Invalid number is selected for Tab Length or Label Length.

No Text You tried to print a text file when there is no data stored in the memory.

The Print key is pressed when no text is entered. You tried to set Copies, Numbering, Mirror, or Text Preview

when no text is entered. Line Lmt You tried to enter a 3rd line by pressing the Enter key.

You tried to print a 2 line text when 9/64" (3.5mm) or 1/4" (6mm) tape is installed.

No Cassette You tried to print a label when there is no cassette installed. Cutter Error Tape cutter lever is used in the middle of printing process. Full The maximum number of characters (80 characters) have

already been entered. Text Lmt The text length exceeds the selected label length or the

selected Auto Format setting length. No Frame OK? Printing on 9/64" (3.5 mm) tape with invalid Frame setting

ON. (Select to print with no Frame, to cancel.)

Problem Solution The display stays blank after you have turned on the machine.

Check that the batteries are correctly inserted. If the batteries are weak, replace them. Check that the AD-24 adapter is correctly connected.

When the label is printed out, there is too much margin (space) on both sides of the text.

See "[Margin] (Tape Margin)" in this users guide and select [Half] or [Narrow] to have smaller margins for your label.

The machine does not print, or the printed characters are not formed properly.

Check that the tape cassette has been inserted correctly. If the tape cassette is empty, replace it. Check the tape compartment cover is properly closed.

The setting has cleared on its own.

The batteries may be weak. Replace them. When power is disconnected for more than two minutes,

all text & formats in the display will be lost. Language, Unit and Time/Date settings will also be cleared.

A blank horizontal line appears through the printed label.

There maybe some dust on the print head. Remove the tape cassette and use a dry cotton swab to gently wipe the print head with an up-and-down motion.

The machine has "locked up" (i.e., nothing happens when a key is pressed, even though the machine is on.)

Turn off the machine, and then while holding down and , press to turn the machine back on.

Finally, release and . Note: The text and formats in the display are erased. Also,

the language, Unit and Time/Date settings will be cleared. The power turns off when you try to print.

The batteries may be weak. Replace them. Check that the batteries are correctly inserted.

The tape does not feed properly or the tape gets stuck inside the machine.

Check that the end of the tape feeds under the tape guides. The cutter lever is used while printing. Do not touch the

cutter lever during printing. All text and format settings need to be cleared to create a new label.

Press and select [Txt&Format].

To change language setting.

See step 2 "Set the language" of the "Initial Settings".

Item Specification Dimensions 4.3" (W) 8.1" (D) 2.3" (H)

(107.4 mm (W) 202.6 mm (D) 56.6 mm (H)) Weight 0.80 lbs. (365 g) (without batteries and tape cassette) Power supply Six AAA alkaline batteries (LR03) or optional AC adapter

(AD-24) Tape cassette Brother TZ tape (width) :

9/64" (3.5 mm), 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm)

Accessories Stock No. Tape Cassettes See the included "Supplies and Accessories Guide". AC Adapter AD-24 Cutter Unit TC-5 (replacement)

[CREATING LABELS]

1 MAKING TEXT Switching Upper Case/Lower Case

Making Two Line Text Move the cursor to where the second line starts and press .

Use either 3/8" (9 mm) or 1/2" (12 mm) wide tape for two line text.

Entering Symbols >

To go to the next group, press . To cancel operations, press .

Entering Accented Characters > > / >

To cancel operations, press . The order of accented characters differ by the selected LCD language.

To Clear By pressing the Backspace Key, the letters will be deleted

one by one.

> [Txt&Format] . All text and settings will be

cleared.

> [Text Only] . Only text will be cleared.

Group Symbols Group Symbols

1 10

2 11

3 12

4 13

5 14

6 15

7 16

8 17

9

Accented Characters Accented Characters A a

C c

D d

E e

G g

I i

K k

L l

N n

O o

R r

S s

T t

U u

Y y

Z z

Upper case ( ON) Lower case ( OFF)

Display Label image

2 3 4DESIGNING LABELS PRINTING LABELS COMPLETED LABELS

USEFUL FUNCTIONS

[Size] > [Size] > [Large]

Automatically adjusts the text size according to the tape width.

[Width] > [Width] > [2]

[Style] (Vertical)

> [Style] > [Vertical]

[Underline/Frame] > [Undl/Frm] > [Undl]

Frames can not be printed on 9/64" (3.5mm) tape.

[Tab] You can make aligned texts by setting tabs. Example: To set a tab between "ABC" and "D"

The cursor should be positioned where you set a tab.

> > [Tab]

[Tab Length](Auto / 0.0" - 4.0" (0-100mm))

> [Tab Length] >

You can also select the length by entering the length with Number keys. To return to [Auto], press .

[Label Length](Auto / 1.2" - 12.0" (30-300mm))

> [Length]>

You can also select the length by entering the length with Number keys. To return to [Auto], press .

[Auto Format] You can choose label length from six formats to create labels for various ap- plications.

> [A/F]> [VCR VHS]

Text Preview You can preview the text before printing.

> [Preview]

The LCD shows the whole text and the label length (inch/mm), then returns to the original text.

Only the text can be previewed, not the font, style, size, underline/frame or any additional features.

Feeding (Tape Feed)

> [Feed]

Printing

To cut off the label, push in the tape cutter lever on the upper-right corner of the machine.

To prevent damage to the tape, do not try to cut while the message "Print" or "Feed" is displayed.

When Chain Print is set, "OK to Feed?" will appear. (See the Note of [Chain Prt] in [Margin] (Tape Margin). )

[Margin] (Tape Margin)

> [Margin] > [Full]

[Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text. NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.

[Chain Prt] (Chain Print) is for printing more than 1 copy of a label with min- imum margin . You can also create a label containing texts in various styles; enter a text in one style and press . After that, cancel feeding (see the note below), and enter the second text in another style .

Using [Print Option] [Copies] You can print up to 9 copies of each label.

> [Print Option] > [Copies] >

You can also select the number of copies by entering with Number keys.

[Numbering] You can print many copies of the same text while increasing a selected number by 1 after each label is printed. Example: To print copies of a label containing a serial number (0123, 0124 and 0125)

> > [Print Option] >

[Numbering] >

Select the highest number you wish to be printed when setting the number.

[Mirror] > [Print Option] > [Mirror] >

[Mirror Prt?]

Use clear tape in [Mirror], so the labels can be read correctly from the oppo- site side when attached on glass, windows or other transparent surfaces.

Peel the printed label from backing and apply the label.

File (Memory)

You can save your original labels on to your machine. Up to nine labels can be saved and recalled for printing whenever you desire. You can also edit and overwrite the stored label.

> > [File] > >

To Save: > [Save] >

To Print: > [Print] >

To Open: > [Open] >

Time/Date Function You can insert the desired time and date to your text at the touch of a button. 8 Formats are available for printing time and date. You can change the number of time/date by changing the clock setting.

To add Time/Date to your text:

The cursor should be positioned where you wish to insert the time and date.

To select the format of Time/Date:

> [TimeDate] >

To change the Clock Setting: See step 4 of the "Initial Settings".

[Large] [Medium] [Small]

[Normal] [2] [1/2]

[Normal] [Bold] [Outline]

[Shadow] [Italic] [I+Bold](Italic Bold)

[I+Outl](Italic Outline) [I+Shadow](Italic Shadow) [Vertical]

[Off] [Undl](Underline) [Round] [Candy]

[Callout] [Banner] [Wooden]

Application Length Application Length VCR VHS 5.5" (140mm) CD Spine 4.4" (113mm) Mini DV 1.6" (42mm) File Tab 3.2" (82mm) Audio 3.5" (89mm) Divider 1.6" (42mm)

You can also use the Function shortcuts for these menu. Press the and the shortcut key shown next to the menu title. To confirm,

press .

( + )

( + )

( + )

( + )

( + )

Label image

ABC D

Tab

Display

( + )

( + )

( + )

FEED THE TAPE BEFORE USING THE CUTTER OTHERWISE A PART OF THE TEXT MAY BE CUT OFF.

After pressing , "OK to Feed?" will appear. Press to feed. Press to cancel.

Do not try to pull the tape since this may damage the tape cassette.

( + )

( + )

( + )

1" 1/2" 1/2" 1/6"1/6"1"

ABC ABC: ABC:

Full Half Narrow

ABC ABC ABC ABC ABC DEF

(feed & cut) (feed & cut)

Chain Print

( + )

If you try to store a label when there is already a label stored to that

number, a message Overwrite? will appear. Press to save your

new label. Press to cancel.

Format Example (October 21st 2009, 3:30PM) Format Example

(October 21st 2009, 3:30PM)

M/D/Y 10/21/09 D.M.Y 21.10.09

M/D/Y hm 10/21/09 03:30PM D.M.Y hm 21.10.09 03:30PM

D/M/Y 21/10/09 Y-M-D 09-10-21

D/M/Y hm 21/10/09 03:30PM Y-M-D hm 09-10-21 03:30PM

FCC NOTICE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. - Changes or modifications not expressly approved by Brother Industries, Ltd. could void the users

authority to operate the equipment.

Should you encounter any problems with your product, please do not return your product to the store! After referring to the User's guide, if you still need assistance, call Brother Customer Service at:

Voice: 1-877-BROTHER Web: www.brother.com Fax: 1-901-379-1210 If you need to locate a service center, please

Manualsnet FAQs

If you want to find out how the P-touch Brother works, you can view and download the Brother P-touch PT-7100 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Brother P-touch as well as other Brother manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Brother P-touch. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brother P-touch PT-7100 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brother P-touch PT-7100 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brother P-touch PT-7100 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brother P-touch PT-7100 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Brother P-touch PT-7100 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.