Contents

Brother BCL-D10 User's Manual PDF

1 of 43
1 of 43

Summary of Content for Brother BCL-D10 User's Manual PDF

USERS GUIDE Digital Cordless Handset BCL-D10

2007 Brother Industries, Ltd.

i

Brother numbers

IMPORTANT For technical help, you must call the country where you bought the machine/cordless handset. Calls must be made from within that country.

FAQs (frequently asked questions)

The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function Center needs. You can download the latest software documents and utilities, read FAQs and troubleshooting tips, and learn how to get the most from your Brother product.

http://solutions.brother.com

For Customer Service

Service Center Locator (USA only) For the location of a Brother authorized service center, call 1-800-284-4357.

Service Center Locations (Canada only) For the location of a Brother authorized service center, call 1-877-BROTHER.

In USA: 1-800-284-4329 (voice)

1-901-379-1215 (fax)

1-800-284-3238 (TTY service for the hearing-impaired) In Canada: 1-877-BROTHER (voice)

(514) 685-4898 (fax)

ii

Ordering accessories and supplies For best quality results use only genuine Brother accessories, which are available at most Brother retailers. If you cannot find the accessory you need and you have a Visa, MasterCard, Discover, or American Express credit card, you can order accessories directly from Brother. (In the USA, you can visit us online for a complete selection of the Brother accessories and supplies that are available for purchase.)

Note In Canada, only Visa and MasterCard are accepted.

Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without notice.

Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

In USA: 1-877-552-MALL (6255)

1-800-947-1445 (fax)

http://www.brothermall.com

In Canada: 1-877-BROTHER

http://www.brother.ca

Description Item Cordless Handset BCL-D10

Battery BCL-BT10

Users Guide LS2932001 (English for USA and Canada)

LS2932002 (French for Canada)

iii

Brother One Year Limited Warranty and Replacement Service (USA only)

Who is covered: This limited warranty (warranty) is given only to the original end-use/retail purchaser (referred to in this warranty as Original Purchaser) of the accompanying product, consumables and accessories (collectively referred to in this warranty as this Product). If you purchased a product from someone other than an authorized Brother reseller in the United States or if the product was used (including but not limited to floor models or refurbished product), prior to your purchase you are not the Original Purchaser and the product that you purchased is not covered by this warranty.

What is covered: This Product includes a battery, Except as otherwise provided herein, Brother warrants that the Product and battery will be free from defects in materials and workmanship, when used under normal conditions. This warranty applies only to products purchased and used in the United States. For products purchased in, but used outside, the United States, this warranty covers only warranty service within the United States (and does not include shipping outside the United States).

What is the length of the Warranty Periods: Product: one year from the original purchase date. Battery: 90 days from the original purchase date or the rated life, whichever comes first.

What is NOT covered: This warranty does not cover: 1 Physical damage or normal wear and tear

to this Product; 2 Damage caused by improper installation,

improper or abnormal use, misuse, neglect or accident (including but not limited to transporting this Product without the proper preparation and/or packaging);

3 Damage caused by another device, power surges or lightening;

4 Conditions beyond the control of Brother, such as common carrier provided services, and

5 Problems arising from other than defects in materials or workmanship.

This limited warranty is VOID if this Product has been altered or modified in any way (including but not limited to attempted warranty repair without authorization from Brother and/or alteration/removal of the serial number).

What to do if you think your Product is eligible for warranty service: Report your issue to our Customer Service Hotline at 1-800-284-4329 Supply Brother with a copy of your dated bill of sale showing that this Product was purchased within the U.S

What Brother will ask you to do: After contacting Brother you may be required to deliver (by hand if you prefer) or send the Product properly packaged, freight prepaid, to the Brother Service Center together with a photocopy of your bill of sale. You are responsible for the cost of shipping, packing product, and insurance (if you desire). You are also responsible for loss or damage to this Product in shipping.

What Brother will do: If the problem reported concerning your Product is covered by this warranty and if you first reported the problem to Brother within the applicable warranty period, Brother will repair or replace the Product at no charge to you for parts or labor. The decision as to whether to repair or replace the Product is made by Brother in its sole discretion. Brother reserves the right to supply a refurbished or remanufactured replacement Product and use refurbished parts provided such replacement products conform to the manufacturers specifications for new product/parts. The repaired or replacement Product will be returned to you freight prepaid or made available for you to pick up at the Brother Service Center.

iv

If the Product is not covered by this warranty (either stage), you will be charged for shipping the Product back to you and charged for any service and/or replacement parts/products at Brother's then current published rates. The foregoing are your sole (i.e., only) and exclusive remedies under this warranty.

What happens when Brother elects to replace your Product: When a replacement Product is authorized by Brother, and you have delivered the Product to the Brother Service Center, the Brother Service Center will provide you with a replacement Product or Brother will send to you a replacement Product with the understanding that you will, after receipt of the replacement Product, supply the required proof of purchase information, together with the Product that Brother agreed to replace. You are then expected to pack the Product that Brother agreed to replace in the package from the replacement Product and return it to Brother using the pre-paid freight bill supplied by Brother in accordance with the instructions provided by Brother. Since you will be in possession of two Products, Brother will require that you provide a valid major credit card number. Brother will issue a hold against the credit card account number that you provide until Brother receives your original Product and determine that your original Product is entitled to warranty coverage. Your credit card will be charged up to the cost of a new Product only if: (i) you do not return your original Product to Brother within five (5) business days; (ii) the problems with your original Product are not covered by the limited warranty; (iii) the proper packaging instructions are not followed and has caused damage to the product; or (iv) the warranty period on your original Product has expired or has not been sufficiently validated with a copy of the proof of purchase (bill of sale). The replacement Product you receive (even if refurbished or remanufactured) will be covered by the balance of the limited warranty period remaining on the original Product, plus an additional thirty (30) days. You will keep the replacement Product that is sent to you and your original Product shall become the property of Brother. Retain your original Accessory Items and a copy of the return freight bill, signed by the courier.

Limitations: Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of this Product. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, WHETHER EXPRESSED BY AFFIRMATION, PROMISE, DESCRIPTION, DRAWING, MODEL OR SAMPLE. ANY AND ALL WARRANTIES OTHER THAN THIS ONE, WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.

This Limited Warranty is the only warranty that Brother is giving for this Product. It is the final expression and the exclusive and only statement of Brother's obligations to you. It replaces all other agreements and understandings that you may have with Brother or its representatives. This warranty gives you certain rights and you may also have other rights that may vary from state to state. This Limited Warranty (and Brother's obligation to you) may not be changed in any way unless you and Brother sign the same piece of paper in which we (1) refer to this Product and your bill of sale date, (2) describe the change to this warranty and (3) agree to make that change. Important: We recommend that you keep all original packing materials, in the event that you ship this Product.

2006 Brother International Corporation

v

BROTHER CORDLESS HANDSET LIMITED WARRANTY (Canada only)

Pursuant to the limited warranty of 1 year from the date of purchase for labour and parts, Brother International Corporation (Canada) Ltd. ("Brother"), or its Authorized Service Centres, will repair or replace (at Brother's sole discretion) this product free of charge if defective in material or workmanship. This warranty applies only to products purchased and used in Canada. This limited Warranty does not include cleaning, consumables (including, without limitation batteries) or damage caused by accident, neglect, misuse or improper installation or operation, any damage caused from service, maintenance, modifications, or tampering by anyone other than a Brother Authorized Service Representative, or if shipped out of the country. The battery included with this product is covered exceptionally for a period of 90 days or the rated life, whichever comes first. The use of supplies or consumable items that are non-Brother products may void your warranty. This limited warranty ceases when this product is rented, sold, or otherwise disposed of. Operation of the Product in excess of the specifications or with the Serial Number or Rating Label removed shall be deemed abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser. In order to obtain warranty service, the Product must be delivered or shipped freight prepaid by the end-user/purchaser to a "Brother" Authorized Service Centre, together with your Canadian Proof of Purchase in the form of a Sales Receipt. When shipping or transporting your Product, please refer to your Operation Manual for the proper packaging procedures. Improper packaging may cause severe damage to the machine during shipping and will void the warranty. BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING, WITHOUT LIMITATIONS, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXCEPT TO THE EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY WAIVED. No oral or written information, advice or representation provided by Brother, its Authorized Service Centres, Distributors, Dealers, Agents or employees, shall create another warranty or modify this warranty. The warranty states Brother's entire liability and your exclusive remedy against Brother for any failure of the Product to operate properly. Neither Brother nor anyone else involved in the development, production, or delivery of this Product shall be liable for any indirect, incidental, special, consequential, exemplary, or punitive damages, including lost profits, arising from the use of or inability to use the product, even if advised by the end user/purchaser of the possibility of such damages. Since some Provinces do not allow the above limitation of liability, such limitation, may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from Province to Province. Warranty Service is available at Brother Authorized Service Centres throughout Canada. For Technical Assistance or for the name and location of your nearest Authorized Service Centre call 1-877-Brother. Internet support: support@brother.ca or browse Brother's Web Site www.brother.ca.

vi

Important Information

Federal Communications Commission (FCC) Compliance Notice (USA only)

This equipment is hearing-aid compatible.

declares, that the products

Product Name: BCL-D10

comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Call the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Responsible Party:

Brother International Corporation 100 Somerset Corporate Boulevard Bridgewater, NJ 08807-0911 USA TEL: (908) 704-1700

vii

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This equipment has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.

IMPORTANT Changes or modifications not expressly approved by Brother Industries, Ltd. could void the users authority to operate the equipment.

Industry Canada Compliance Statement (Canada only)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.

Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This equipment has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.

Trademark

The Brother logo is a registered trademark of Brother Industries, Ltd.

Brother is a registered trademark of Brother Industries, Ltd.

2007 Brother Industries, Ltd. All rights reserved.

All other brand and product names mentioned in this Users Guide are registered trademarks of their respective companies.

viii

Table of Contents 1 General Information

Using the documentation .......................................................................................1 Symbols and conventions used in the documentation ....................................1

Introduction ............................................................................................................1 Optional Cordless Handset....................................................................................2

Carton Components ........................................................................................2 Connecting the power cord to the cradle .........................................................2 Installing the battery ........................................................................................2 Setting your country.........................................................................................3 Registering additional cordless handsets ........................................................3

Deregistering cordless handsets ...........................................................................4 Choosing a location ...............................................................................................5 Important safety instructions..................................................................................5 Control panel overview ..........................................................................................6

LCD display screen .........................................................................................7

2 Telephone Basic operation ......................................................................................................8

Making a telephone call ...................................................................................8 Answering calls................................................................................................8 Hold .................................................................................................................8 Tone or pulse (For Canada only).....................................................................8 Search .............................................................................................................9 Call History/Redial ...........................................................................................9 Caller ID history ...............................................................................................9 Pause ............................................................................................................10

Storing numbers for easy dialing .........................................................................11 Storing numbers ............................................................................................11 Storing numbers from the Call History...........................................................11 Storing Tel-Index numbers from the Caller ID history ...................................12 Changing numbers ........................................................................................12

Advanced operation.............................................................................................13 Transferring a call at the end of a conversation ............................................13 Intercom calling .............................................................................................14 Three-way calling ..........................................................................................14

ix

3 Menu and Features On-screen programming......................................................................................15 Menu keys ...........................................................................................................15

Memory storage.............................................................................................15 Menu Table..........................................................................................................16 Entering Text .......................................................................................................17 General setup ......................................................................................................18

Ring Volume ..................................................................................................18 Beeper Volume..............................................................................................18 Speaker Volume ............................................................................................18 Handset Volume ............................................................................................18 Handset Volume (For Volume Amplify) .........................................................18 Ring Pattern...................................................................................................19 Automatic Daylight Savings Time..................................................................19 LCD Contrast.................................................................................................20 Date and Time ...............................................................................................20 Choosing your language (Canada only) ........................................................20 Voice Enhance ..............................................................................................20 Echo Control..................................................................................................21

4 Troubleshooting and Routine Maintenance Troubleshooting...................................................................................................22

If you are having difficulty with your cordless handset ..................................22 Error messages ...................................................................................................23 Routine maintenance...........................................................................................24

Charging the battery ......................................................................................24 Cleaning ........................................................................................................24 Replacing the battery.....................................................................................25

5 Specifications General................................................................................................................27

Cordless handset...........................................................................................27 Battery ...........................................................................................................27 Battery cradle ................................................................................................28 AC adapter ....................................................................................................28

Basic Feature.......................................................................................................28

6 Index

1

1 Using the documentation 1

Thank you for buying a Brother machine! Reading the documentation will help you make the most of your cordless handset.

Symbols and conventions used in the documentation 1

The following symbols and conventions are used throughout the documentation.

Introduction 1

The cordless handset offers several functions that can be used to enhance the calling features of your Brother machine.

Redial: Allows you to choose one of the last 10 numbers dialed for redialing.

Store numbers: You can store up to 100 names with each having a number available for Tel-Index.

Transfer: Transfer calls between the cordless handset and the machine (base unit). If you have additional optional cordless handsets (4 max.) you can also transfer a call to another cordless handset.

Intercom:

Use the intercom feature to make internal calls between the cordless handset and the machine (base unit). If you have additional optional cordless handsets (4 max.) you can also make an intercom call to another cordless handset.

Three-way calling:

Three-way calling allows two users to speak with a third party from the machine (base unit) and the cordless handset at the same time.

Caller ID: If you have the Caller ID subscriber service from your telephone company the incoming caller will be identified on the LCD display of the cordless handset. You can also store this number as a Tel-Index number.

General Information 1

Bold Bold typeface identifies specific keys on the control panel of the cordless handset or the machine (base unit).

Italics Italicized typeface emphasizes an important point or refers you to a related topic.

Courier New

Text in the Courier New font identifies messages on the LCD of the cordless handset.

Warnings tell you what to do to prevent possible personal injury.

Cautions specify procedures you must follow or avoid to prevent possible damage to the cordless handset or other objects.

Notes tell you how you should respond to a situation that may arise or give tips about how the operation works with other features.

General Information

2

1 Optional Cordless Handset 1

Your Brother machine can support 3 additional cordless handsets for a total of 4 cordless handsets. If you have purchased an optional cordless handset please follow the steps below to setup and register your optional cordless handset with the machine (base unit). For the cordless handset that was included with your machine please follow the setup steps in the Quick Setup Guide.

Carton Components 1

Make sure you have all the components below.

1 AC adapter 2 Cordless Handset 3 Users Guide 4 Battery 5 Battery Cover 6 Cradle

Connecting the power cord to the cradle 1

a Plug the connector into the jack (1) and route the cable through the hook (2) as shown below.

b Plug the AC adapter into the AC power outlet.

Installing the battery 1

a Insert the connector (1) of the new battery (2) in the direction shown below.

1 2

3 4

5

1 2

1

2

Chapter 1

3

b Place the battery in the correct position as shown below.

c Slide the battery cover back on.

Note Be careful that you do not catch the

battery connector cord. After replacement, you should set the date

and time. (See Date and Time on page 20.)

d Charge the battery for 12 hours. (See Charging the battery on page 24.) You can continue to set up the handset during this time.

Setting your country 1

The first time you install the battery, you must set your country so that the cordless handset works correctly on local telecommunication lines.

a Press Menu/OK.

b Press a or b to choose your country. Press Menu/OK.

c Press 1 to confirm.

Registering additional cordless handsets 1

You can register 3 additional cordless handsets for a total of 4 cordless handsets to the machine (base unit). The cordless handset that was included with your machine is already registered with the machine (base unit).

Note Do not operate any other cordless handsets until registration of the cordless handset you are registering has completed.

For non-Color LCD models (base unit) 1

a Press Menu/OK on the cordless handset.

Note If you see Enter Register HS Mode on Base Unit on the LCD of the cordless handset, go to step c.

b Press a or b to choose Register HS. Press Menu/OK.

c Press Menu, 0, 6 on the control panel of the machine (base unit).

d Press OK on the control panel of the machine (base unit). You will hear one long beep when the cordless handset is registered correctly.

General Information

4

1 Note

If you hear three short beeps, the cordless handset did not register. Repeat steps b and d.

If you want to install another cordless handset, repeat steps a through d.

e Press Stop/Exit on the control panel of the machine (base unit).

For Color LCD models (base unit) 1

a Press Menu/OK on the cordless handset.

Note If you see Enter Register HS Mode on Base Unit on the LCD of the cordless handset, go to step c.

b Press a or b to choose Register HS. Press Menu/OK.

c Press Menu on the control panel of the machine (base unit).

d Press a or b to choose Initial Setup. Press OK.

e Press a or b to choose Register Handset. Press OK.

f Press a or b to choose Register. Press OK. You will hear one long beep when the cordless handset is registered correctly.

Note If you hear three short beeps, the cordless

handset did not register. Repeat step b and f.

If you want to install another cordless handset, repeat steps a through f.

g Press Stop/Exit on the control panel of the machine (base unit).

Deregistering cordless handsets

If you want to register a handset that has already been registered, with another machine (base unit), you should deregister it first, and then register it with the other machine (base unit). (See Registering additional cordless handsets on page 3.) If you are using more than one cordless handset, deregistration will remove all handsets registered with the machine (base unit).

Note Do not operate any other cordless handsets until deregistration of the cordless handset you are removing has completed.

For non-Color LCD models (base unit) 1

a Press Menu, 0, 6 on the control panel of the machine (base unit).

b Press Erase. Then, confirm the Delete by pressing 1.

c Press Stop/Exit.

For Color LCD models (base unit) 1

a Press Menu on the control panel of the machine (base unit).

b Press a or b to choose Initial Setup. Press OK.

c Press a or b to choose Register Handset. Press OK.

d Press a or b to choose Terminate. Press OK. Then, confirm the Delete by pressing 1.

e Press Stop/Exit.

Chapter 1

5

Choosing a location 1

Choose a location where the temperature remains between 50 F and 95 F (10 and 35 C).

DO NOT put the cordless handset and cradle near heaters, air conditioners, water or chemicals.

DO NOT expose the cordless handset and cradle to direct sunlight, excessive heat, moisture, or dust.

DO NOT use the cordless handset near electro-medical equipment.

We recommend at least 9.8 ft (3 m) between the machine (base unit) or cordless handset and other electronic devices.

Important safety instructions 1

WARNING

Use only the AC adapter and the cradle supplied with this cordless handset.

This product must be installed near an AC power outlet that is easily accessible.

Use only a genuine Brother rechargeable battery.

DO NOT dispose of a used battery in a fire. It may explode.

Corrosive fluid rarely leaks out. If it gets in your eyes wash them with water at once. Call a doctor if you are concerned.

DO NOT allow the battery to touch any conductive materials. It can cause a short circuit of the battery.

CAUTION

DO NOT take off the white plastic that covers the battery.

(MFC-885CW)

9.8 ft (3 m)

9.8 ft (3 m)

General Information

6

1 Control panel overview1

1 LCD (liquid crystal display) Displays messages on the screen to help you set up and use your cordless handset.

2 Redial/Pause Redials any of the last 10 numbers you called. It also puts a pause in Quick-Dial numbers.

3 Headset jack You can connect an external headset with microphone (not included) to the cordless handset. To access the headset jack fold open the headset jack cover located on the left side of the cordless handset. You can connect any standard headsets that use a 2.5 mm mini style plug.

4 Clear Press to back up the cursor and delete a letter.

5 Talk

Press to make or receive a phone call.

6 Dial Pad Use these keys to dial a telephone number and as a keyboard for entering information into the cordless handset. (Canada only) The # key lets you temporarily switch the dialing mode during a telephone call from Pulse to Tone.

7 Speaker Phone Turns the speaker phone on or off.

8 Charging LED Turns green when the cordless handset is being charged.

9 Flash/Callwait Use this key to answer another phone call when you hear beeps during the conversation. This feature requires the Call Waiting subscriber service offered by many local telephone companies. (Canada only) You can make a call from the Caller ID history in combination with a prefix number by pressing this key.

1

4

5

6

7

2

10

8

9

3

11

12

13

Chapter 1

7

10 Menu keys: Volume keys

d c You can press these keys to adjust the ring, speaker or handset volume of the cordless handset.

a Lets you look up numbers that are stored in the cordless handsets dialing memory. a or b Press to scroll through the menus and options.

11 Menu/OK Lets you access the Menu to program or store your settings in the cordless handset.

12 Off

Press to hang up or cancel the current operation.

13 Hold/Intercom Lets you place telephone calls on hold. Also, press this key to speak on the intercom, to transfer an incoming call to the cordless handset or to make a three-way call.

LCD display screen 1

The LCD shows the current cordless handset status.

1 Cordless status A four level indicator shows the current cordless handset signal strength.

2 Speaker Phone Lets you see when you are speaking with the Speaker Phone.

3 Cordless handset number Lets you see the cordless handset numbers that have been registered with the machine (base unit).

4 Ring volume status Lets you see when the ring volume is set to off.

5 Battery status A four level indicator shows the available battery.

0 Max

0 Max

1 2 3 4 5

8

2

2 Basic operation 2

Making a telephone call 2

a Pick up the cordless handset.

b Enter a number using the dial pad or choose a number stored in the dialing memory.

c Press (Talk).

d Speak clearly toward the microphone.

e Press (Off) to hang up.

f Replace the cordless handset.

Note If you want to make a telephone call without lifting the cordless handset, press Speaker Phone and enter the number using the dial pad.

Answering calls 2

a Pick up the cordless handset from the cradle to answer the call. If your cordless handset is not in the cradle you

must press (Talk) to answer the call.

b To end the call, press (Off).

c Replace the cordless handset.

When the machine (base unit) or the cordless handset rings, instead of lifting the cordless

handset, and pressing (Talk) you can also press Speaker Phone on the cordless handset. Speak clearly toward the cordless handset. To end the call, press

(Off).

If you have a bad connection, your caller might hear your voice echoed during the call. If you experience this problem, pick up the cordless handset and press Speaker Phone to use the handset.

Note Even if you answer a fax call, the machine (base unit) will receive the fax automatically. (See Easy Receive in the Users Guide.)

Hold 2

If you want to put a call on hold, press the Hold/Intercom key. To release the call from hold press Hold/Intercom again. You can also transfer a call to the machine (base unit) or to another cordless handset if you have an additional optional cordless handset. (See Transferring a call at the end of a conversation on page 13.)

Tone or pulse (For Canada only) 2

If you have a pulse dialing service, but need to send tone signals (for example, for telephone banking), follow the instructions below. If you have a Touch Tone service, you will not need this feature to send tone signals.

a Pick up the cordless handset.

b Press (Talk).

Telephone 2

Chapter 2

9

c Press # on the control panel of your cordless handset. Any digits dialed after this will send tone signals. When you hang up, the cordless handset will return to the pulse dialing service.

d Press (Off).

Search 2

You can search for names you have stored in the Tel-Index memories.

a Pick up the cordless handset.

b Press a and do one of the following: Press a or b to choose the name you want to call. Use the dial pad to enter the first letter of the name, press Menu/OK, and then press a or b to choose the name you want to call.

Call History/Redial 2

The last 10 numbers you called will be stored in the call history. You can choose one of these numbers to make a call, add it to Tel-Index, or delete it from the history.

a Pick up the cordless handset.

b Press Redial/Pause. You can also choose Call History by pressing Menu/OK.

c Press a or b to choose a number and do one of the following:

To make a call, press

(Talk). To store or delete the number, press Menu/OK and go to step d.

d Do one of the following: If you want to store the number, press a or b to choose Set Tel-Index. Press Menu/OK. (See Storing numbers from the Call History on page 11.) If you want to delete the number, press a or b to choose Delete. Press Menu/OK. Then, confirm the Delete by pressing 1. If you want to delete all the stored numbers, press a or b to choose All Delete. Press Menu/OK. Then, confirm the Delete by pressing 1.

Caller ID history 2

This feature requires the Caller ID subscriber service offered by many local telephone companies. (See Caller ID in the machines Users Guide.)

The last 30 numbers you received will be stored in the Caller ID history. You can choose one of these numbers to make a call, add it to Tel-Index, or delete it from the history.

a Pick up the cordless handset.

b Press Menu/OK.

c Press a or b to choose Caller ID hist.. Press Menu/OK.

d Press a or b to choose a number and do one of the following:

To make a call, press

(Talk). To store or delete the number, press Menu/OK and go to step e.

Telephone

10

2

e Do one of the following: If you want to store the number, press a or b to choose Set Tel-Index. Press Menu/OK. (See Storing numbers from the Call History on page 11.) If you want to delete the number, press a or b to choose Delete. Press Menu/OK. Then, confirm the Delete by pressing 1. If you want to delete all the stored numbers, press a or b to choose All Delete. Press Menu/OK. Then, confirm the Delete by pressing 1.

Note This feature may not be available in

certain areas of the USA and Canada.

(USA only) If you redial from the Caller ID history outside your area code you must set up your AREA CODE in advance. (See Setting up your area code (USA only) on page 10.)

(Canada only) You can make a call from the Caller ID history in combination with a prefix number. After you enter a prefix number manually, press Flash/Callwait. Press a or b to choose a number and press

(Talk).

Setting up your area code (USA only) 2

Your cordless handset will automatically dial "1" plus the area code for any number that does not originate in your area code. The cordless handset can identify local calls from your area code by entering your area code in the Area Code setting. With this setting, calls returned from the caller ID history to your area code will be dialed using only 7-digits. If you must dial the area code to call within your area code, do not enter this setting. If your dialing plan does not follow the standard 1 + area code + 7-digit number dialing system for calling outside your area code, you may experience problems returning calls automatically from the caller ID history. If this is not the procedure followed by your dialing plan you will not be able to return calls automatically.

a Press Menu/OK.

b Press a or b to choose Area Code. Press Menu/OK.

c Use the dial pad to enter your area code. Press Menu/OK.

d Press (Off).

Pause 2

Press Redial/Pause to put a 3.5-second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Chapter 2

11

Storing numbers for easy dialing 2

You can set up your cordless handset for easy dialing. When you dial a Tel-Index number, the LCD shows the name, if you stored it, or the number.

Note If you lose electrical power, the Tel-Index numbers that are in the memory will not be lost.

Storing numbers 2

You can store up to 100 locations with a name and a number. When you dial you will only have to press a few keys (for example:

a , a or b and (Talk)).

a Pick up the cordless handset.

b Press a .

c Press a or b to choose Set Tel-Index. Press Menu/OK.

d Do one of the following: Enter the name (up to 14 characters) using the dial pad. Press Menu/OK. (To help you enter letters, see Entering Text on page 17.) To store the number without a name, press Menu/OK.

e Enter the telephone number (up to 20 digits). Press Menu/OK.

f Do one of the following: To store another number, go to step c. To finish the setting, press

(Off).

Storing numbers from the Call History 2

You can also store numbers from the call history.

a Pick up the cordless handset.

b Press Menu/OK.

c Press a or b to choose Call History. Press Menu/OK.

d Press a or b to choose the number you want to store. Press Menu/OK.

e Press a or b to choose Set Tel-Index. Press Menu/OK.

f Do one of the following: Enter the name (up to 14 characters) using the dial pad. Press Menu/OK. (To help you enter letters, see Entering Text on page 17.) To store the number without a name, press Menu/OK.

g Press Menu/OK to confirm the number.

Telephone

12

2

Storing Tel-Index numbers from the Caller ID history 2

If you have the Caller ID subscriber service from your telephone company you can also store Tel-Index numbers from incoming calls in the Caller ID history. (See Caller ID in the Users Guide.)

a Pick up the cordless handset.

b Press Menu/OK.

c Press a or b to choose Caller ID hist.. Press Menu/OK.

d Press a or b to choose the number you want to store. Press Menu/OK.

e Press a or b to choose Set Tel-Index. Press Menu/OK.

f Do one of the following: Enter the name (up to 14 characters) using the dial pad. Press Menu/OK. (To help you enter letters, see Entering Text on page 17.) To store the number without a name, press Menu/OK.

g Press Menu/OK to confirm the number.

Changing numbers 2

You can change or delete a name or number that has already been stored.

a Pick up the cordless handset.

b Press a .

c Press a or b to choose the location you want to change. Press Menu/OK.

d Do one of the following: Press a or b to choose Change. Press Menu/OK and go to step e. Press a or b to choose Delete. Press Menu/OK. Then, confirm the Delete by

pressing 1 and (Off).

e Do one of the following: Enter the name (up to 14 characters) using the dial pad. Press Menu/OK. (See Entering Text on page 17.) If you do not want to change the name, press Menu/OK.

Note If you want to change a character, press d or c to position the cursor under the incorrect character and press Clear. Re-enter the correct letter.

f Do one of the following: Enter the new number. Press Menu/OK. If you do not want to change the number, press Menu/OK.

g Press (Off).

Chapter 2

13

Advanced operation 2

You can transfer a call, make an intercom call or use three-way calling. If you have optional cordless handsets you must register the handset with the machine (base unit). See Registering additional cordless handsets on page 3. The cordless handset that was included with your machine (base unit) is already registered as Handset 1.

Transferring a call at the end of a conversation 2

You can transfer a call after you speak.

From the machine (base unit) 2

a When you have finished speaking, press Hold/Intercom.

b Press the number of the cordless handset you want to transfer to.

c After you confirm the other person is on the line, hang up.

Note If no one is on the line, press Hold/Intercom to release the call from hold.

From the cordless handset 2

a Press Hold/Intercom when you have finished speaking.

b Press a or b to choose Base Unit. Press Menu/OK.

c After you confirm the other person is on the line, hang up.

Note If no one is on the line, press

Hold/Intercom to release the call from hold.

If you have the optional cordless handset, you can choose another cordless handset in step b.

Base Unit machine

Handset#1 cordless handset 1 included with the machine

Handset#2 optional cordless handset 1

Handset#3 optional cordless handset 2

Handset#4 optional cordless handset 3

Telephone

14

2

Intercom calling 2

The intercom feature allows you to make internal calls between the cordless handset and the machine (base unit). If you have additional optional cordless handsets (4 max.) you can also make an intercom call to another cordless handset.

Making a call from the machine (base unit) 2

a Press Hold/Intercom.

b Press the number of the cordless handset you want to speak with.

c After you have finished speaking, hang up.

Making a call from the cordless handset 2

a Pick up the cordless handset.

b Press Hold/Intercom.

c Press a or b to choose Base Unit. Press Menu/OK.

d After you have finished speaking, hang up.

Note If you have the optional cordless handset, you can choose another cordless handset in step c.

Three-way calling 2

You can speak with another person on the other handset and a third party in a three-way call. After you speak with the third party, you can make a call to the other handset.

Calling the cordless handset from the machine (base unit) 2

a Press Hold/Intercom when you have finished speaking.

b Press the number of the cordless handset you want to speak with.

c After you confirm the other person is on the line, press Hold/Intercom.

Calling the machine (base unit) from the cordless handset 2

a Press Hold/Intercom when you have finished speaking.

b Press a or b to choose Base Unit. Press Menu/OK.

c After you confirm the other person is on the line, press Hold/Intercom.

Note If you have the optional cordless handset, you can choose another cordless handset in step b.

15

3 On-screen programming 3

Your cordless handset is designed to be easy to use with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your cordless handset has to offer.

Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your cordless handset. All you need to do is follow the instructions as they guide you through the menu selections and programming options.

Menu keys 3

To access the menu mode:

a Press Menu/OK.

b Press a or b to choose an option.

c Press Menu/OK when that option appears on the LCD. The LCD will then show the next option.

d Press a or b to choose the option.

e Press Menu/OK. When you have finished setting an option, the LCD shows Accepted.

Memory storage 3

Even if there is a battery power failure, you will not lose your menu settings because they are stored permanently. You may have to reset the date and time.

Menu and Features 3

Access the menu.

Go to the next menu level.

Accept an option. Delete an incorrect letter when

you need to enter text into the cordless handset.

Scroll through the current menu level.

Exit the menu.

Menu and Features

16

3

Menu Table 3

The menu table will help you understand the menu selections and options that are found in the cordless handset's programs. The factory settings are shown in Bold with an asterisk.

Level1 Level2 Options Descriptions Page

Setup Volume Beeper On*

Off

Adjusts the volume level of the beeper.

18

Volume Amplify On

Off*

For the hearing-impaired, you can set the volume to the On setting.

18

Ringer Pattern Signal 1*

Signal 2

Signal 3

Signal 4

Signal 5

Melody 1

Melody 2

You can choose a ring pattern. 19

Call History Delete

All Delete

Set Tel-Index

You can choose a number from the call history and then make a phone call to it, add it to Tel-Index, or delete it.

9

Caller ID hist. Delete

All Delete

Set Tel-Index

You can choose a number from the Caller ID history and then make a phone call to it, add it to Tel-Index, or delete it.

9

Auto Daylight On

Off*

Changes for Daylight Savings Time automatically.

19

LCD Contrast 1

2

3

4*

5

6

7

Adjusts the contrast of the LCD. 20

Date&Time Puts the date and time on the LCD.

20

Register HS Registers the cordless handset into the machine (base unit).

3

Voice Enhance On*

Off

Changing this setting to Off will increase the battery life but may reduce voice quality.

20

Area Code (USA only)

Sets up your 3-digit area code only if you do not dial it within your own areacode.

10

Select Language (Canada Only)

English*

French

Allows you to change the LCD language for your country.

20

Chapter 3

17

Entering Text 3

When you are storing a name or a number in the Tel-Index memory, you may need to enter text into the cordless handset. Most dial pad keys have three or four letters printed on keys. The keys for 0, # and l do not have printed letters because they are used for special characters.

By pressing the proper dial pad key repeatedly, you can access the character you want.

Putting spaces To enter a space in a name, press c twice between characters.

Making corrections If you entered an incorrect letter and want to change it, press d to move the cursor under the incorrect character. Then press Clear. Re-enter the correct character. You can also back up and insert letters.

Repeating letters If you need to enter a letter that is on the same key as the letter before, press c to move the cursor to the right before you press the key again.

Special characters and symbols

Press l, # or 0, repeatedly until you see the special character or symbol you want.

Press Key

one time

two times

three times

four times

2 A B C 2

3 D E F 3

4 G H I 4

5 J K L 5

6 M N O 6

7 P Q R S

8 T U V 8

9 W X Y Z

Press l for (space) ! " # $ % & ' ( ) l + , - . / m

Press # for : ; < = > ? @ [ ] ^ _ Press 0 for 0

Menu and Features

18

3

General setup 3

Ring Volume 3

You can choose a range of ring volume levels, from High to Off.

a Press d or c to adjust the volume level. This setting will stay until you change it again.

Note

If you choose Off, will appear on the LCD.

Even if you choose Off, the cordless handset will ring in the lowest volume level when you receive a transferred call.

Beeper Volume 3

When the beeper is on, the cordless handset will beep when you press a key.

a Press Menu/OK.

b Press a or b to choose Setup Volume. Press Menu/OK.

c Press a or b to choose Beeper. Press Menu/OK.

d Press a or b to On or Off. Press Menu/OK.

e Press (Off).

Speaker Volume 3

You can choose a range of speaker volume levels, from High to Low.

a Press Speaker Phone.

b Press d or c . This setting will stay until you change it again.

c Press (Off).

Handset Volume 3

You can adjust the cordless handset volume any time you are talking on the telephone.

a Press d or c . This setting will stay until you change it again.

Handset Volume (For Volume Amplify) 3

Before you begin to use the cordless handset, you must decide if you need to set the cordless handset volume to Volume Amplify:On for a user who is hearing-impaired. The AMPLIFY volume level complies with FCC standards. Before you use this setting, see Choosing the Handset Volume (For Volume Amplify) in the machines Users Guide.

a Press Menu/OK.

b Press a or b to choose Setup Volume. Press Menu/OK.

c Press a or b to choose Volume Amplify. Press Menu/OK.

Chapter 3

19

d Do one of the following: If none of the users are hearing- impaired, press a or b to choose Off, and then press Menu/OK and go to step f. If some or all of the users are hearing-impaired, press a or b to choose On, and then press Menu/OK.

e Do one of the following: If all the users are hearing-impaired, press a or b to choose Permanent, and then press Menu/OK. If only some of the users are hearing- impaired, press a or b to choose Temporary, and then press Menu/OK.

f Press (Off).

WARNING

It is important that you do NOT choose Permanent unless ALL the users are hearing-impaired. Otherwise, the default setting of Volume Amplify may damage the hearing of some users.

Ring Pattern 3

You can choose a ring pattern from five signal (regular ring patterns) or two types of melodies.

a Press Menu/OK.

b Press a or b to choose Ringer Pattern. Press Menu/OK.

c Press a or b to choose Signal 1, Signal 2, Signal 3, Signal 4, Signal 5, Melody 1 or Melody 2. Press Menu/OK.

d Press (Off).

Automatic Daylight Savings Time 3

You can set the cordless handset to change automatically for daylight savings time. It will reset itself forward one hour in the Spring and backward one hour in the Fall. Make sure you have set the correct date and time in the Date&Time setting.

a Press Menu/OK.

b Press a or b to choose Auto Daylight. Press Menu/OK.

c Press a or b to choose On or Off. Press Menu/OK.

d Press (Off).

Melody name

Melody 1 Grandfathers clock

Melody 2 The four seasons concerto Spring 1

Menu and Features

20

3

LCD Contrast 3

You can adjust the LCD contrast for a sharper and more vivid display. If you are having difficulty reading the LCD, try changing the contrast setting.

a Press Menu/OK.

b Press a or b to choose LCD Contrast. Press Menu/OK.

c Press d or c to adjust the contrast. Press Menu/OK.

d Press (Off).

Date and Time 3

The cordless handset displays the date and time.

a Press Menu/OK.

b Press a or b to choose Date&Time. Press Menu/OK.

c Enter the two digits for the month on the dial pad. (e.g. Enter 0 3 for March.)

d Enter the two digits for the day on the dial pad. (e.g. Enter 0 1 for the first day of the month.)

e Enter the last two digits of the year on the dial pad. Press Menu/OK. (e.g. Enter 0 8 for 2008.)

f Enter the time in 24-hour format on the dial pad. Press Menu/OK. (e.g. Enter 1 5 2 5 for 3:25 P.M.)

g Press (Off).

Choosing your language (Canada only) 3

You can change the LCD language.

a Press Menu/OK.

b Press a or b to choose Select Language. Press Menu/OK.

c Press a or b to choose your language. Press Menu/OK.

d Press (Off).

Voice Enhance 3

The voice enhance setting offers the best reception quality under all conditions. This setting is On as factory default. If you normally use the cordless handset in close proximity to the machine (base unit) then you can set voice enhance Off to increase the battery life. With this setting Off you may experience reduced reception quality.

a Press Menu/OK.

b Press a or b to choose Voice Enhance. Press Menu/OK.

c Press a or b to choose Off (or On). Press Menu/OK.

d Press (Off).

Chapter 3

21

Echo Control 3

Under some conditions you may experience an echo when using the cordless handset. You can reduce or remove the echo by choosing a level in the echo control setting from the control panel of the machine (base unit). It will take a moment for the level setting to change. During this time you can not answer a call.

For non-color LCD models (base unit) 3

a Press Menu, 1, 8 on the control panel of the machine (base unit).

b Press a or b to choose level1, level2, level3 or level4. Press OK.

c Press Stop/Exit.

For color LCD models (base unit) 3

a Press Menu on the control panel of the machine (base unit).

b Press a or b to choose General Setup. Press OK.

c Press a or b to choose Echo Control. Press OK.

d Do one of the following: (MFC-845CW) Press a or b to choose level1, level2, level3 or level4. Press OK. (MFC-885CW) Press d or c to choose level1, level2, level3 or level4. Press OK.

e Press Stop/Exit.

22

4

4

Troubleshooting 4

IMPORTANT For technical help, you must call the country where you bought the cordless handset. Calls must be made from within that country.

If you think there is a problem with your cordless handset, check the chart below and follow the troubleshooting tips.

Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com.

If you are having difficulty with your cordless handset 4

Troubleshooting and Routine Maintenance 4

Difficulties Suggestions

The cordless handset does not operate.

Check that the battery is charged properly. (See Charging the battery on page 24.)

Dialing or receiving does not work. Check that the phone line connection of the machine (base unit).

Check that the machine (base unit) is plugged in and the On/Off key on the machine (base unit) is on.

Check that the battery is charged properly. (See Charging the battery on page 24.)

Come closer to the machine (base unit). The cordless handset may be too far from the machine (base unit).

Bad phone line connection Check that there are no electronic devices between the machine (base unit) and the cordless handset.

Come closer to the machine (base unit). The cordless handset may be too far from the machine (base unit).

During the conversation, try to adjust the angle of the antenna to improve reception.

Move away from walls.

Try to change the Echo Control setting. (See Echo Control on page 21.)

The battery does not charge. Check that the battery is installed properly in the cordless handset. (See Replacing the battery on page 25.)

Check that the cordless handset is placed properly in the cradle and LED turns green. (See Charging the battery on page 24.)

Clean the charger contacts for both cordless handset and the cradle. (See Cleaning on page 24.)

The battery performance is still poor after recharging.

It is time to replace the battery. (See Replacing the battery on page 25.)

Chapter 4

23

Error messages 4

As with any sophisticated office product, errors may occur. If this happens, your cordless handset identifies the error and shows an error message. The most common error messages are shown below.

You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers latest FAQs and troubleshooting tips.

Visit us at http://solutions.brother.com.

The cordless handset beeps during a call.

Come closer to the machine (base unit). The cordless handset may be too far from the machine (base unit).

Your battery may be low. If you want to continue the call, transfer the call to the machine (base unit) and use the Speaker Phone key to answer. (See Transferring a call at the end of a conversation on page 13.) And then, charge the battery. (See Charging the battery on page 24.)

You cannot make an internal call. The cordless handset or the machine you want to call to may be on an internal call or an outside call. Wait until the line is free.

You cannot register the optional cordless handset.

Check that both the cordless handset and the machine (base unit) are in standby mode.

Error Message Cause Action Base Unit in use

The machine (base unit) is being used for intercom calling.

Wait until the line is free.

The machine (base unit) is being set up for cordless handset registration.

Wait until the registration is finished.

The machine (base unit) is being used for Message Center functions such as OGM recording or ICM playing.

Wait until machine (base unit) is back in standby mode.

Cannot register Handset

You failed to register the cordless handset.

Try to register the cordless handset again. (See Registering additional cordless handsets on page 3.)

Line in use Another person is on the phone line using the machines (base unit) speaker phone or another cordless handset.

Wait until the line is free.

The machine (base unit) is receiving faxes.

Wait until the line is free.

Low Battery Put handset on cradle

The battery of the cordless handset is low.

Charge the battery. (See Charging the battery on page 24.)

Difficulties Suggestions

Troubleshooting and Routine Maintenance

24

4 Routine maintenance 4

Charging the battery 4

If your battery is getting low, you should charge the battery. You can see the battery strength at the bottom right of the LCD.

a Make sure the AC adapter of the cradle or the machine (base unit) is connected to an AC power outlet.

b Place the cordless handset in the cradle with the dial pad facing forward.

Cleaning 4

Clean the outside of the cordless handset with a soft cloth. You should also clean the charger contacts. If the charger contacts are not clean, the battery may not be charged.

CAUTION

Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the cordless handset.

DO NOT use cleaning materials that contain ammonia.

DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel.

Clean the charger contacts as follows: 4

a Unplug the cradle from the AC power outlet.

b Clean the charger contacts (1) for both the cordless handset and the cradle with a cotton swab.

No Caller ID There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company.

If you want to use the Caller ID feature call your telephone company. (See Caller ID in the Users Guide.)

Searching for Base Unit

(Base Unit not detected)

The cordless handset is too far from the machine (base unit).

Bring the cordless handset closer to the machine (base unit).

You have not registered the cordless handset.

Register the cordless handset. (See Registering additional cordless handsets on page 3.)

Error Message Cause Action

1

Chapter 4

25

Replacing the battery 4

If your battery performance is getting worse, make sure that you have charged the battery correctly. If the battery performance is still poor, it is time to replace it.

WARNING

Use a genuine Brother rechargeable battery (BCL-BT10). If not, it may cause damage or personal injury.

CAUTION

DO NOT take off the white plastic that covers the battery.

a Press the area indicated (1) on the battery cover (2) and slide it off the cordless handset.

b Remove the old battery and pull out the connector.

c Insert the connector (1) of the new battery (2) in the direction shown below.

d Place the battery in the correct position.

e Slide the battery cover back on.

Note Be careful that you do not catch the

battery connector cord. After replacement, you should set the date

and time. (See Date and Time on page 20.)

f Charge the battery for 12 hours. (See Charging the battery on page 24.)

1

2

1

2

Troubleshooting and Routine Maintenance

26

4

CAUTION

ATTENTION: The product you have purchased is powered by Nickel Metal Hydride battery which is recyclable.

(For USA) At the end of their useful lives, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8- BATTERY or visit www.rbrc.com for information on how to recycle this battery.

(For Canada) For more information on how to recycle this battery, please call 1-800-8- BATTERY or visit www.rbrc.com.

RECYCLE

1 8 0 0 . 8 2 2 . 8 8 37

R B R C

N i - M H TM

27

5 General 5

Cordless handset 5

1 When Voice Enhance is set to On. 2 When Voice Enhance is set to Off.

Battery 5

Specifications 5

Frequency 5.8 GHz Technology FHSS (Frequency Hopping Spread Spectrum) Multi Handset Capability Up to 4 handsets Dimensions

Weight (including battery) 5.43 oz (154 g) LCD (liquid crystal display) 16-Digit, 3-Line (+1-Line for Pict), Backlit (Orange) Charge Indicator Yes (LED) Full Charge Time 12 hours While in Use (TALK) 4 hours 1

6 hours 2

While Not in Use (Standby) 200 hours

Type BCL-BT10 Rating Ni-MH 3.6 V 730 mAh

6.06 in. (154 mm)

1.24 in. (31.6 mm)

1.95 in. (49.6 mm)

Specifications

28

5

Battery cradle 5

AC adapter 5

Basic Feature 5

Dimensions

Weight 2.53 oz (71.6 g) Power Consumption (during charge)

Charging: Average 2 W

Type BCL-ADA Input AC 100 to 240 V 50/60 Hz Output DC 11.0 V

Tel-Index Up to 100 names 1 numbers Redial Yes Melody ringer patterns Yes (2 melodies, 5 signals) 2 Way Intercom Handset-to-Handset and Handset-to-Base Unit Talk Time display Yes

2.64 in. (67 mm)

3.35 in. (85 mm) 2.72 in. (69 mm)

Index

29

6 A Accessories and supplies .......................... ii

B Battery

charging ................................................24 installing ..................................................2 power failure .........................................15 recycling ................................................26 replacing ...............................................25

Brother accessories and supplies ........................ ii Brother numbers ...................................... i Customer Service .................................... i FAQs (frequently asked questions) .......... i product support ........................................ i Warranties .............................................. iii

C Cleaning ...................................................24 Control panel overview ..............................6

D Date and time ...........................................20 Daylight saving time .................................19 Dialing

call history ...............................................9 caller ID history .......................................9 pause ....................................................10 tel-index ..................................................9

E Echo Control ............................................21 Error messages on LCD ..........................23

H HELP

LCD messages .....................................15 using menu keys ................................15

menu table ............................................15

L LCD (liquid crystal display) .................. 7, 15

contrast ................................................. 20

M Maintenance, routine ............................... 24 Memory storage ...................................... 15 Menu table ............................................... 16

O Optional cordless handset ......................... 2

deregistering ........................................... 4 registering ............................................... 3

P Programming your cordless handset ....... 15

R Redial/Pause ............................................. 9 Ring pattern ............................................. 19

S Safety instructions ..................................... 5

T Telephone ................................................. 8

call history .............................................. 9 caller ID history ....................................... 9 hold ......................................................... 8 intercom ............................................ 1, 14 three-way calling .............................. 1, 14 transferring ........................................... 13

Tel-Index changing ............................................... 12 deleting ................................................. 12 storing ................................................... 11

from call history ................................. 11 from caller ID history ......................... 12

Text, entering .......................................... 17 special characters ................................ 17

30

Troubleshooting .......................................22 error messages on LCD ........................23 if you are having difficulty .....................22

V Voice enhance .........................................20 Volume, setting

beeper ...................................................18 handset .................................................18

volume amplify ...................................18 ring ........................................................18 speaker .................................................18

W Warranties

Canada ................................................... v USA ....................................................... iii

World Wide Web ......................................... i

EQUIPMENT ATTACHMENT LIMITATIONS (Canada only)

NOTICE This product meets the applicable Industry Canada technical specifications.

NOTICE The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.

Brother International Corporation 100 Somerset Corporate Boulevard

P.O. Box 6911 Bridgewater, NJ 08807-0911 USA

Brother International Corporation (Canada) Ltd. 1 rue Htel de Ville,

Dollard-des-Ormeaux, QC, Canada H9B 3H6

Visit us on the World Wide Web http://www.brother.com

These machines are made for use in the USA and Canada only. We cannot recommend using them overseas because it may violate the Telecommunications Regulations of that country and the power requirements of your cordless handset AC adapter may not be compatible with the power available in foreign countries. Using USA o

Manualsnet FAQs

If you want to find out how the BCL-D10 Brother works, you can view and download the Brother BCL-D10 User's Manual on the Manualsnet website.

Yes, we have the User's Manual for Brother BCL-D10 as well as other Brother manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Manual should include all the details that are needed to use a Brother BCL-D10. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brother BCL-D10 User's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brother BCL-D10 User's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brother BCL-D10 User's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brother BCL-D10 User's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Brother BCL-D10 User's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.