Broan 360NDK Hood Instruction Manual PDF

1 of 4
1 of 4

Summary of Content for Broan 360NDK Hood Instruction Manual PDF

1. Install PM390SSP per installation instructions shipped with power module. 2. Remove aluminum filter and attach the CHARCOAL FILTER (included) to the backside of the

aluminum filter with the 4 supplied metal clips. 3. Remove backdraft damper. (Damper supplied with power module.) 4. Cut hole in bottom of SOFFIT to allow clearance for the 90 ANGLE BOOT. 5. Locate top of 4 X 10 OPENING on soffit - centered on POWER MODULE CENTERLINE and

26.625 above bottom of POWER MODULE. 6. Layout 4 x 10 pattern and cut opening in soffit. 7. Connect 90 ANGLE BOOT to 6-IN. TO 7-IN. ROUND TRANSITION. 8. Insert boot end into soffit and connect 6-in. round end to the exhaust of the unit. 9. Install GRILLE (included - not shown) into soffit opening. 10. Use metal foil tape to make all connections secure and air tight.

INSTALLATION INSTRUCTIONS 360NDK DUCTLESS CONVERSION KIT FOR THRU SOFFIT VENTING

FOR USE WITH PM390SSP POWER MODULE

SOFFIT

CABINET

90 ANGLE BOOT (included)

6-IN. TO 7-IN. ROUND TRANSITION

(included)

PM390SSP POWER MODULE

OPTIONAL METAL LINER (LB30SS or LB36SS) (purchase separately)

4 x 10 SOFFIT OPENING

POWER MODULE CENTER LINE

CL

26.625

CHARCOAL FILTER (included) (99010464)

1. Installer le module motoris PM390SSP conformment aux directives dinstallation qui laccompagnent. 2. Retirer le filtre en aluminium et fixer le FILTRE AU CHARBON (fourni) larrire du filtre en aluminium

laide des 4 attaches mtalliques fournies. 3. Retirer le clapet antirefoulement (clapet fourni avec le module motoris.) 4. Dcouper louverture dans le bas de la SOFFITE pour permettre le dgagement requis pour le RACCORD

COUD DE 90. 5. Reprer lOUVERTURE DE 10,8 cm X 26 cm (4 po X 10 po) de la soffite - aligne sur la LIGNE DE

CENTRE DU MODULE MOTORIS et 67,6 cm (26,625 po) au-dessus du bas du MODULE MOTORIS. 6. Placer le gabarit de 10,8 cm X 26 cm (4 po X 10 po) et dcouper louverture dans la soffite. 7. Connecter le RACCORD COUD DE 90 la TRANSITION RONDE DE 15,2 cm (6 po) 17,8 cm (7 po). 8. Insrer lextrmit du raccord dans la soffite et raccorder lextrmit de 15,2 cm (6 po) la sortie de lunit. 9. Installer la GRILLE (fournie - non illustre) dans louverture de la soffite. 10. Utiliser du ruban mtallique conduit pour fixer tous les raccords et assurer leur tanchit.

DIRECTIVES DINSTALLATION ENSEMBLE DE CONVERSION SANS CONDUIT 360NDK

POUR VENTILATION PAR LA SOFFITE UTILISER AVEC LE MODULE MOTORIS PM390SSP

SOFFITE

ARMOIRE

RACCORD COUD DE 90 (fourni)

TRANSITION RONDE DE 15,2 cm (6 po)

17,8 cm (7 po)

MODULE MOTORIS PM390SSP

ENVELOPPE MTALLIQUE EN OPTION

(LB30SS ou LB36SS) (vendue sparment)

OUVERTURE DE LA SOFFITE DE

10,8 cm x 26 cm (4 po x 10 po)

LIGNE DE CENTRE DU MODULE MOTORIS

CL

26,625 po (67,6 cm)

FILTRE AU CHARBON (fourni) (99010464)

1. Instale el PM390SSP segn las instrucciones enviadas con el mdulo elctrico. 2. Retire el filtro de aluminio y fije el FILTRO DE CARBN (incluido) en la parte posterior del filtro de aluminio con los

4 sujetadores metlicos suministrados. 3. Retire el regulador de contratiro. (El regulador se suministra con el mdulo elctrico.) 4. Corte un orificio en la parte inferior del PLAFN para dejar espacio para la TRANSICIN EN NGULO DE 90. 5. Localice la parte superior de la ABERTURA DE 4 X 10 pulg. (10.8 X 26 cm) en el plafn, centrada en la LNEA

CENTRAL DEL MDULO ELCTRICO y a 26.625 pulg. (67.6 cm) por arriba de la parte inferior del MDULO ELCTRICO.

6. Extienda el patrn de 4 x 10 pulg. (10.8 x 26 cm) y corte la abertura en el plafn. 7. Conecte la TRANSICIN EN NGULO DE 90 a la TRANSICIN REDONDA de 6 PULG. (15.2 CM) A 7 PULG.

(17.8 CM) 8. Inserte el extremo de la transicin en el plafn y conecte el extremo redondo de 6 pulg. (15.2 cm) a la salida de

la unidad. 9. Instale la REJILLA (incluida, no se ilustra) en la abertura del plafn. 10. Coloque cinta de aluminio metlica en todas las conexiones para asegurarlas y hacerlas hermticas.

INSTRUCCIONES DE INSTALACIN JUEGO DE CONVERSIN SIN CONDUCTOS 360NDK

PARA VENTILACIN EN PLAFN PASANTE, PARA USARSE CON EL MDULO ELCTRICO PM390SSP

PLAFN

GABINETE

TRANSICIN EN NGULO DE 90 (incluida)

TRANSICIN REDONDA DE 6 PULG. (15.2 CM) A

7 PULG. (17.8 CM) (incluida)

MDULO ELCTRICO PM390SSP

RECUBRIMIENTO METLICO OPCIONAL

(LB30SS o LB36SS) (se compra por separado)

LNEA CENTRAL DEL MDULO ELCTRICO

CL

26.625 PULG.

(67.6 CM)

FILTRO DE CARBN (incluido) (

Manualsnet FAQs

If you want to find out how the 360NDK Broan works, you can view and download the Broan 360NDK Hood Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Broan 360NDK as well as other Broan manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Broan 360NDK. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Broan 360NDK Hood Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Broan 360NDK Hood Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Broan 360NDK Hood Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Broan 360NDK Hood Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Broan 360NDK Hood Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.