Breville VIN281 Instruction Booklet PDF

1 of 20
1 of 20

Summary of Content for Breville VIN281 Instruction Booklet PDF

2000W

steam generator

instruction booklet

2

product safety

This product can be used by children aged 8 years and above, and persons who require supervision, provided: they are familiar with the hazards associated with the

product, and, they receive instruction by a competent person on how to

safely use the product. Children must not play with the product. Cleaning and user maintenance must not be done by children unless they are supervised. Keep the appliance and its cord out of reach of children less than 8 years old when it is switched on or cooling down. The appliance must not be left unattended when it is connected to the mains supply. The appliance must be unplugged from the mains supply socketbeforefillingthewatertankwithwater. Always use the appliance on a stable, secure, dry and level surface. When placing the appliance on its stand, ensure that the surface on which the stand is placed is stable. Do not use the appliance if it has been dropped, if there are any visible signs of damage or if it is leaking. If the supply cord is damaged, it must be replaced by the manufacturer,itsserviceagentorsimilarlyqualifiedpersons in order to avoid a hazard.

3

Please read these instructions before operating the appliance and retain them for future use.

! Never use this appliance for anything other than its intended use. This appliance is for household use only. Do not use this appliance outdoors. ! Always ensure that hands are dry before handling the plug or switching on the appliance. ! Do not touch the metal parts of the appliance during use as they may become very hot. ! This appliance must not be placed on or near any potentially hot surfaces (such as a gas or electric hob). ! Always allow the appliance to cool before cleaning or storing. ! Never immerse any part of the appliance or power cord and plug in water or any other liquid. ! Never let the power cord hang over the edge of a worktop, touch hot surfaces or become knotted, trapped or pinched.

4

features

1. Steam lock button 2. Temperature indicator light 3. Steam trigger 4. Temperature control 5. Steam hose 6. Temperature control ring 7. Temperature control pointer 8. Stainless steel soleplate 9. Boiler rinse plug cover 10. Boiler rinse plug (underneath the rinse plug cover) 11. Iron rest 12. Low water indicator light 13. Steam indicator light 14. Steam control 15. On/off button 16. Watertankfillingcover 17. Water tank 18. Water tank release button 19. Mains power cord storage strap 20. Mains power cord

5

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

wer tq

;

j

l

f g h

2)

k

uy

o a

s d

STEA M

6

filling your steam generator

Never add fabric conditioner, starches or any other chemicals to the water in your steam generator. Use cold tap water only in your steam generator.

1. Remove the water tank by pressing the water tank release button underneath the tank.

2. Slide the water tank out. 3. Open the water tank filling cover. 4. Fill the water tank with cold tap water to the MAX mark. 5. Close the water tank filling cover and slide the water tank back into the base unit until

it latches securely into place. Note that when you use your steam generator for the first time or after rinsing the boiler, a lot of water will be pumped out of the water tank. Refill the tank as required.

Filling during use You can fill your steam generator during use without having to remove the water tank. The low water indicator light will flash to let you know that the water tank needs filling.

Simply open the water tank filling cover and add water as required. Do not fill past the MAX indicator mark on the tank.

Beforefirstuse Remove all packaging including any soleplate protection before operating your

steam generator.

Wipe over the soleplate with a soft cloth.

Position your steam generator iron horizontally on your ironing board (if it is large enough) or on a heat resistant and secure surface at the same height as your ironing board.

Before connecting your steam generator to the mains supply, make sure your supply voltage is the same as the one indicated on your steam generator.

When you first use your steam generator, there may be a slight odour and it may smoke slightly for the first few minutes of operation. This is quite normal and will disappear.

When you first use your steam generator, iron an old towel to ensure that any residues inside the iron are not transferred to your laundry.

7

e

q

w

r

t

MAX

8

using your steam generator

We recommend that you: Start by ironing those items of laundry that require the lowest temperature (e.g.

synthetics). Finish by ironing fabrics which respond best to higher temperatures and steamsuch as cotton and linen.

If you iron a fabric made of a blend of fibres set the temperature of your iron to the most delicate fibre.

When using starch, it should be sprayed onto the reverse side of the fabric and the soleplate cleaned more frequently.

Do not iron over sharp or hard objects such as buttons, studs or zippers as they will scratch the soleplate of your iron.

Important Your steam generator takes time to heat up and cool down. If you change the temperature setting on your steam generator, you must give it time to adjust to the new setting.

This is especially important when you change from a high setting to a lower one. It takes your steam generator longer to cool down than it does to heat up and this is the reason we recommend that you begin ironing at lower temperatures.

If you do need to reduce the temperature of your steam generator, wait until the temperature indicator light comes on and then goes out again before ironing. This will ensure that your steam generator has cooled to the lower temperature and is not too hot for the fabric being ironed.

For example, you have been ironing using the lll setting and wish to change to the ll setting:

1. Rotate the temperature control ring to set the pointer to the ll setting. Initially, the temperature indicator light will be off because your steam generator is still at the higher temperature.

2. Wait until the temperature indicator light comes on and then goes out again. Your steam generator has now cooled to the correct temperature.

9

using your steam generator

Steam ironing During steam ironing, if you do not allow your steam generator to reach the

selected temperature water may drip from the soleplate. During use the steam pipe and iron rest will become very hot.

It is recommended that for harder to iron fabrics such as cotton and linen, steam should be used when ironing.

When ironing cotton and linen, always select the highest temperature. Steam should never be used on delicate fabrics like nylons, acrylics and synthetics.

1. Fill the water tank with water. 2. Plug your steam generator into the mains supply and press the on/off button to switch

your steam generator on. 3. Rotate the temperature control ring to set the pointer to between the ll and the

maximum heat (MAX) setting. 4. The temperature indicator light will light up as your steam generator heats up. When

the temperature indicator light goes out your steam generator is at the selected temperature. The temperature indicator light will turn on and off during ironing as your steam generator maintains the correct temperature.

5. You will hear a buzzing sound as the pump inside your steam generator operates and transfers water from the water tank to the boiler where steam is produced. Set the desired amount of steam as described below in the Adjusting the amount of steam section. The steam indicator light will flash as your steam generator heats the water to create steam. When the steam indicator light stops flashing, your steam generator is ready to use. The steam indicator light will occasionally flash during ironing. This is normal.

6. With the soleplate in contact with the garment, press the steam trigger for a couple of seconds. It is not necessary to hold the trigger down continuously as steam will still be emitted from the soleplate for a short time after the trigger has been released. If more steam is required, press the steam trigger again.

Always release the trigger and allow any residual steam to be released before replacing the iron on its stand.

The pump will occasionally start and stop during ironing. This is normal

Adjusting the amount of steam 1. You can adjust the amount of steam using the steam control. 2. Turn the steam control clockwise to increase steam, or anticlockwise to decrease

steam. Steam can be switched off by turning it fully anticlockwise to OFF.

10

Ironing without steam If you intend to dry-iron fabrics there is no need to fill the water tank. However, if water is already in the water tank, you do not need to empty it.

1. Rotate the temperature control ring to set the pointer to the desired heat setting. 2. Turn the steam control fully anticlockwise to OFF. 3. When the temperature indicator light goes out your steam generator is ready to use.

The light will continue to turn on and off during ironing as your steam generator maintains the soleplate temperature.

4. Iron your laundry without pressing the steam trigger or using the steam lock button.

Vertical steam ironing Vertical steam ironing is especially useful for ironing items such as curtains while they are hanging, or jackets, suits and coats.

Hold the iron in a vertical position and press the steam trigger as required.

Steam lock To prevent fatigue, your steam generator can be set to produce steam without having to constantly hold the steam trigger in the on position.

1. Slide the steam lock button forwards and steam will be continuously emitted from the soleplate.

2. To stop, slide the steam lock button backwards. Always release the steam lock button when you put the iron back onto the iron rest.

using your steam generator

q w

11

troubleshooting

Problem Possible cause Solution

My steam generator doesnt heat up.

Your steam generator is not connected properly.

Check the mains power cord, plug and wall socket.

Your steam generator is not switched on.

Press the on/off switch to switch your steam generator on.

The temperaure is set to MIN.

Set the temperature to the required temperature.

My steam generator does not produce any steam.

There is not enough water in the water tank.

Fill the water tank as required.

Your steam generators boiler is still heating up.

Wait until the steam indicator light stops flashing and goes out.

The selected temperature is too low for steam ironing.

Set the temperature to ll or higher.

The water tank is not fitted correctly.

Check that the water tank is correctly fitted.

The steam may not be visible if your steam generator is set to a high ironing temperature.

Set your steam generator to a lower temperature (e.g. ll) to check if steam is being produced.

Water droplets come out of the soleplate.

The selected temperature is too low for steam ironing.

Set the temperature to ll or higher.

If you have left your steam generator for some time between ironing, steam left in the steam hose can cool down and cause water dropets to form.

This is normal. Hold your iron over an old cloth and press the steam trigger until steam rather than water droplets come from the soleplate.

My steam generator occasionally makes a strange sound.

This is the internal pump transferring water from the water tank as required.

This is normal.

Dirty water comes out of the soleplate.

Scale and other impurities have accumulated inside the boiler of your steam generator.

Allow your steam generator to fully cool down then rinse the boilersee care and cleaning on page 16.

12

Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your steam generator because they will damage the surface.

After each use After each use, allow your steam generator to completely cool down before wiping the soleplate with a soft damp cloth. If polyester has burnt to the soleplate, iron a damp cotton cloth while your steam generator is still hot. If necessary, allow your steam generator to completely cool down then wipe over the soleplate with a soft cloth moistened with methylated spirits. Remove the methylated spirit with a damp cloth. Make sure that the soleplate is completely dry.

To clean the exterior of your steam generator, wipe over with a soft damp cloth and wipe dry. Ensure the soleplate is dry.

To remove build-up from the steam holes which may affect steam performance, use a cotton wool tip moistened in methylated spirits. Wipe over with a damp cloth.

Rinsing out the boiler NEVER remove the boiler rinse plug when your steam generator is hot. Allow

your steam generator to cool for at least 2 hours before removing the boiler rinse plug.

To maintain optimum performance, it is important to rinse out the boiler in your steam generator once a month or after every 10 times you have used it.

Unplug your steam generator and allow it to cool for at least 2 hours. Remove the water tank.

1. Remove the iron from the iron rest and place it to one side. Shake the base unit for a few seconds.

2. Remove the boiler rinse plug cover by pulling it away from the base unit. 3. Use a coin to unscrew the boiler rinse plug. 4. Place the base unit on its side and and pour about 300ml (approx. equal to 1 coffee

mug) of cold tap water into the opening. 5. Shake the base unit again for a few seconds to agitate the water in the boiler. 6. Pour out the water into a sink. 7. Repeat steps 4, 5 and 6 again. 8. Refit the boiler rinse plug and tighten it firmly using a coin. 9. Refit the boiler rinse plug cover.

care and cleaning

13

14

Storing your iron Switch the mains supply socket off and remove the plug. Allow your steam generator

to completely cool down.

Empty any remaining water from the water tank.

Wrap the steam hose around the channel in the base unit as shown.

Use the mains cord storage strap to secure the mains cord as shown.

storage

15

This appliance must be earthed.

This appliance is fitted with either a moulded or rewirable BS1363, 13 amp plug. The fuse should be rated at 13 amps and be ASTA approved to BS1362.

If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance must not be used without the fuse cover fitted.

If the plug is unsuitable, it should be dismantled and removed from the supply cord and an appropriate plug fitted as detailed below. If you remove the plug it must not be connected to a 13 amp socket and the plug must be disposed of immediately.

The wires of the mains lead are coloured in accordance with the following code:

GREEN/YELLOW = EARTH BLUE = NEUTRAL BROWN = LIVE

The wire which is coloured GREEN/YELLOW must be connected to the terminal in your plug which is marked with an E or by the earth symbol ( ) or coloured GREEN or GREEN /YELLOW.

The wire which is coloured BLUE must be connected to the terminal in your plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in your plug which is marked with the letter L or coloured RED.

If any other plug is used, a 13 amp fuse must be fitted either in the plug or adaptor or at the distributor board.

Plug should be BS1363 approved Fit a 13 Amp Fuse

Ensure that the outer sheath of the cable is firmly held by the clamp

BROWN (Live)

13 Amp Fuse

BLUE (Neutral)

GREEN/YELLOW (Earth)

connection to the mains supply

16

after sales service

These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the unit fails to operate:

1. Check the instructions have been followed correctly. 2. Check that the fuse has not blown. 3. Check that the mains supply is functional. If the appliance will still not operate, return the appliance to the place it was purchased for a replacement. To return the appliance to the Customer Service Department, follow the steps below:

1. Pack it carefully (preferably in the original carton). Ensure the unit is clean. 2. Enclose your name and address and quote the model number on all correspondence. 3. Give the reason why you are returning it. 4. If within the guarantee period, state when and where it was purchased and include

proof of purchase (e.g. till receipt). 5. Send it to our Customer Service Department at the address below:

Customer Service Department

Pulse Home Products Limited

Middleton Road

Royton

Oldham

OL2 5LN, UK.

Telephone: 0161 621 6900 Fax: 0161 626 0391

e-mail: info@pulse-uk.co.uk

17

This product is guaranteed for a period of 1 year from the date of purchase against mechanical and electrical defects.

This guarantee is only valid if the appliance is used solely for domestic purposes in accordance with the instructions provided, that it is not connected to an unsuitable electricity supply, dismantled or interfered with in any way or damaged through misuse. Under this guarantee we undertake to repair or replace free of charge any parts found to be defective.

Nothing in this guarantee or the instructions relating to the product excludes, restricts or otherwise affects your statutory rights.

In line with our policy of continuous development, we reserve the right to change this product, packaging and documentation without

Manualsnet FAQs

If you want to find out how the VIN281 Breville works, you can view and download the Breville VIN281 Instruction Booklet on the Manualsnet website.

Yes, we have the Instruction Booklet for Breville VIN281 as well as other Breville manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Booklet should include all the details that are needed to use a Breville VIN281. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Breville VIN281 Instruction Booklet is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Breville VIN281 Instruction Booklet consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Breville VIN281 Instruction Booklet free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Breville VIN281 Instruction Booklet, simply download the document to your computer. Once downloaded, open the PDF file and print the Breville VIN281 Instruction Booklet as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.