Brandt BAM84WSUA Washing Machine User Manual PDF

1 of 16
1 of 16

Summary of Content for Brandt BAM84WSUA Washing Machine User Manual PDF

INSTRUCTION MANUAL EN

Washing machine

2EN

Dear Customer,

You have just purchased a BRANDT product and we thank you for your trust.

We designed and manufactured this product with you, your lifestyle and your needs in mind, in order to best meet your expectations. We have put into it our expertise, our spirit of innovation and all the passion which has driven us for over 60 years.

We make every effort to ensure our products better meet your require- ments, and our Customer Relations Department is at your disposal and will be happy to hear any questions or suggestions you may have.

You may also visit our website www.brandt.com where you will find our latest innovations, as well as useful and complementary information.

BRANDT is happy to assist you in your daily life and hopes you will fully enjoy your purchase.

Important: Before switching on your appliance, please read this user guide carefully in order to familiarise yourself more

quickly with its operation.

3 EN

This appliance has been designed exclusively for domestic use for washing linen.

SAFETY

EN -

Recommended loads: The maximum capacity of the appliance is 8 kg.

The following instructions must be respected:

InstallatIon: This appliance is designed to be used for domestic and similar applications such as: - kitchen areas for staff in shops, offices and other professional premises; - farms; - use by hotel, motel and other residential clients; - B&B-type environments.

The pressure of the water supply must be between 0.1 and 1 MPa (1 and 10 bars). Do not use an extension, adapter, multi-socket or a timer plug. The electrical installation must be able to withstand the maximum power indicated on the rating plate and the plug must be properly grounded. Once your appliance has been installed, the plug must remain accessible. Only use the hose and the new seals F supplied with the appliance. If the power cord is damaged, have it changed by the After Sales Service or a qualified professional to avoid any risks. We recommend that the appliance is not placed onto a mat or car- pet to avoid hampering the circulation of air at its base. If a problem occurs that you cannot solve (see page 12), do not attempt to repair the machine yourself. Call the resellers or the manufacturers technical service.

4EN

Use: This appliance may be used by children of 8 years or older and by persons with limited physical, sensorial or mental capacities or without experience or knowledge of it, provided that they are cor- rectly supervised or if they are given instructions on the use of the appliance in complete safety if the risks incurred are understood. Children should be supervised to ensure that they do not play with the appliance and prevent children of less than 3 years old from playing with it, unless they are constantly supervised. The device should not be cleaned or maintained by unsupervised children. Do not load linen that has been treated with stain removers, sol- vents or inflammable products straight after they have been treated (risk of explosion) This washing machine is fitted with a safety device to prevent any spillage of water. At the end of the cycle, ensure the water tap is switched off and the appliance unplugged.

ENVIRONMENT

SAFETY (continued)

This washing machine has been designed to res- pect the environment.

ProtectIng the envIronment The dose of washing product depends on how dirty the laundry is and the hardness of the water. Do not exceed the dose recommended by the manufactu- rer of the washing product. This appliances packaging material is recyclable. Help protect the environment by placing the pac- kaging into the municipal containers provided for

this purpose. Your washing machine also contains many recyclable materials, it features this logo to remind you that used appliances must not be mixed with other waste.

The appliance must therefore be recycled. Contact your town hall or your retailer for the used appliance collection points closest to your home.

Energy savIng Only programme a prewash when it is absolutely necessary. For linen that is not very or normally dirty, a low temperature programme is sufficient.

5 EN

2 - USE

RecommendatIons: Before inserting the linen, sort it by colour, how dirty it is and the type of textile. Empty all pockets, close zips, removes hooks from curtains, place Small items of underwear in a mesh bag. Remove any loose buttons, pins and clips. Knot belts, and ties for aprons, etc.

2.1 - LoadIng yoUr washIng (Diagram 2.1) Open the view port by pulling the handle.

1 - INSTALLATION

1.3 - ConnectIon to the water sUpply (Diagram 1.3 ) Connect the feed pipe with its new washers to the coupling on the rear of the washing machine and to a tap with a threaded 20x27 endpiece.

1.4 - DraInIng (Diagram 1.4) Position the drain hose, fitted with the curved part, G ensuring that the instructions shown on the diagram are respected and especially that the connection is not air-tight: air must pass freely between the drain hose and the drain to avoid used water from flowing back up the hose into the machine and bad smells being caused.

1.2 - LevellIng the machIne (Diagram 1.2) The appliance must be installed on a horizontal floor. If necessary and if it has adjustable feet, stabi- lise your washing machine by levelling them.

1.5 - ElectrIcal connectIon (Diagram 1.1.1) Ensure that the indications on the data plate of the Appliance are respected.

1.6 - CleanIng before Use Once installed, your washing machine must be cleaned by programming a cotton cycle at 90C with nothing inside and with half a dose of washing powder.

1.1 - UnpackIng

The following instructions must be respected:

Lift the washing machine and remove the motor B chock and base A (Diagram 1.1.2).

Remove the 5 transit bolts C and block the 5

Important: Never remove the top E from your appliance (Diagram 1.2).

holes with the caches D (Diagram 1.1.3)

2.2 - WashIng prodUcts and addItIves (Diagram 2.2) The product drawer has 3 compartments:

pre-wash (powder), wash (powder or liquid), softener.

Use detergents that are certified for domestic washing machines. Do not use liquid detergents with the pre-wash cycle and/or delayed start. Do not exceed the maximum level.

6EN

3 - PROGRAMMING

3.1 - The control panel

1

2

On / Off

Start/Pause 4

3 5Selecting the Programme

Options

Display

1110 12

9

7

6 Degree of soiling

Selecting the temperature

8 Selecting the spin speed

9 Delayed start

11

10 Easy start function light

Child safety indicator light

12 Door lock light

CLOSE-UP OF THE DISPLAY 5

7

6

8

C

h : min

rpm

4

1

23 5

7 EN

3.2 - ProgrammIng a wash cycle

StartIng the applIance Press the On/Off button 1 . When using your washing machine for the first time, the manufac- turers programme will appear, and then your pre- ferred programme and options will be displayed automatically, thanks to the Easy start function. The indicatoris 10 on. If this programme suits you, press Start/Pause 2 to start the programme. Otherwise, you can change the programme by turning the selector 3 . The LED corresponding to the chosen programme switches on. The machine displays the most suitable temperature and spin speed for the selected programme and the esti- mated cycle duration. If you wish, you can modify the temperature by pressing successively button 7 (Diagram 3.2.1).

Nota : For a cold wash, change the temperature to 0.

Using key 8 , you may: - modify the spin speed (automatic limit for certain programmes) (Diagram 3.2.2) - choose drip dry (Diagram 3.2.3). The cycle will end by draining the washing machine and will not spin. - or stop with the drum full (Diagram 3.2.4). You can select any options using keys 4 and 6 . The led corresponding to your selection switches on. A warning beep informs you of any options that are not compatible with your programme.

Press Start/Pause 2 to start your programme.

The door lock indicator 12 lights up (Diagram 3.2.5).

A few minutes after the cycle is launched, the dura- tion is updated according to the quantity and type of laundry in the machine.

Delayed start of a programme Select your programme.

Press the Delayed start key 9 to delay the start of your programme hour by hour, until you reach the time you want (max. 24h) (Diagram 3.2.6). Confirm your cycle selection by pressing the

Start/Pause button 2 . The display 9 shows the time remaining until the start of the programme via a countdown in hours, then in minutes during the last hour.

3 - PROGRAMMING (continued)

8EN

3 - PROGRAMMING (continued)

3.2 - ProgrammIng a wash cycle (continued)

End of the washIng cycle The display shows End (Diagram 3.2.7) and the

door lock indicator 12 goes out. You can programme a new cycle without having to

press the On/Off key 1 . This display is automatically switched off after a maximum of 5 minutes in order to save energy in standby mode. Open the view port and remove your washing.

Press and hold the On/Off 1 button to switch off the washing machine.

ChIld safety Activate Child safety to lock your programme by pressing buttons 6 and 7 at the same time. Once this safety device is active, light 11 , corresponding to the ( ) symbol ,comes on (Diagram 3.2.8). Simultaneously press the same buttons again to switch off the Child safety function.

CancellIng a programme

Press and hold the On/Off button 1 . All the lights go out. You can do this at any time: during the cycle, pro- gramming or during a pause. Nota : In all cases, cancelling a programme means that you have to re-programme everything from the start again (see paragraph 3.2) and a partial emp- tying is carried out.

Information:

In the event of a power cut, the cycle will automa- tically restart from the point where it stopped, as soon as the power returns.

AddIng or removIng an Item dUrIng the cycle (impossible during spin) If you need to add or remove items of clothing:

Press and hold the Start/Pause button 2 to interrupt the programme. If the water level is too high, the view post does not open. The time remaining flashes and the door lock indi-

cator 12 goes out. Insert or remove the linen. The time taken to unlock the view port

depends on the temperature inside the machine and can last up to several minutes for safety reasons. Close the view port again and press Start/Pause

2 to restart the programme. The countdown resumes. Nota : If you have selected a delayed start, you can open the drum at any time before the wash programme starts.

9 EN

Programme delIcates The very careful programme that takes care of satin, silk and wool. Your linen is cradled, as if was- hed by hand, and gently spun.

RInse/spIn programme When this programme is selected, the Sensitive skin option is activated automatically. Deactivate this option for spin drying only.

SensItIve skIn optIon Add an extra rinse. Ideal for people with delicate skin.

Easy IronIng optIon Wash and spin dry speeds adapted to avoid crum- pling of the linen.

Dark coloUrs optIon Enables your washing machine to take care of your darks and prevent creases and traces of detergent.

degree of soIlIng optIon Use this button to shorten or lengthen the wash cycle between two levels that can be chosen by pressing the button successively. Level 1 is for dirty laundry and increases the len- gth of the cycle by 20% on average (Diagram 3.2.9). Level 2 is for laundry that needs refreshing and reduces the length of the cycle by 40% on average (Diagram 3.2.10).

Important: For this programme, the doses of detergent should be reduced by half.

Programme daIly optIa 39 To wash a normal load of moderately dirty cotton or mixed linen in 39 minutes with a perfect result.

Programme cotton To wash moderately dirty cotton textiles with opti-

mised energy.

Programme stUrdy cotton fabrIc For a load consisting of sponge, resistant white or coloured cotton.

Programme cotton prewash To remove earth, sand, blood... This sequence includes a wash in clean water.

It is also necessary to put a detergent (was- hing powder only) in the prewash product

compartment (Diagram 2.2).

Programme mIxed For a linen load of mixed fibres.

Programme synthetIcs For a linen load of resistant synthetics.

Programme flash 25 minutes To wash a moderately dirty small cotton or mixed linen load in 25 minutes.

Important : For this programme, the doses of detergent should be reduced by half.

Sport programme For technical textiles. Wash designed to preserve the elastic fibres contained in sportswear and not slacken them.

Sheets/towels programme Intensive cycle for deep wash and additional rinsing. Optimised cycle with the non-removable Sensitive skin and Degree of soiling options.

ShIrt programme This programme is specially designed to wash six moderately soiled shirts that have been worn for one day in less than 40 minutes. The spin speed is adjusted to limit wrinkling (Easy ironing option not removable).

3 - PROGRAMMING (continued)

10EN

3 - PROGRAMMING (continued)

FonctIon drIp dry ( Essorage

) With very delicate laundry, this function empties the washing machine without spin drying.

FonctIon fUll drUm stop ( ) This function allows you to defer the spin phase. with your washing remaining in water to prevent creasing.

When the machine has stopped with a full drum, the icon flashes and the remaining time indica- tor shows 00:00 (Diagram 3.2.11).

Then: If you want to drain and spin, select a spin speed suitable for the type of laundry.

Or, if you want to drain only, select the drip dry function (spin speed

Essorage ).

The programme will stop automatically.

Programmes table

Programmes Temperature (C)

Maximum weight of dry

clothes

S ensitive skin

E asy ironing

S oiling

D ark colours

D rip-dry

Full drum stop

COTTON Cold - 90 8,0 kg

STURDY COTTON FABRIC 40 - 60 8,0 kg

COTTON PREWASH Cold - 60 8,0 kg

MIXED Cold - 60 3,0 kg

SYNTHETICS Cold - 60 3,0 kg

Special programmes

Daily OptiA 39 Cold - 40 3,0 kg

Flash 25 minutes Cold - 40 2,0 kg

Sport Cold - 40 2,5 kg

Sheets / towels Cold - 60 8,0 kg

Shirts Cold - 40 1,5 kg

Delicates Cold - 40 1,5 kg

Additional programmes

Rinse / Spin - -

ESSORAGE

TestIng programme for energy labelIng pUrpose : - Standard cotton programme at 60C : Cotton 60C No option Max spin.

11 EN

3 - PROGRAMMING (continued)

- Adjustment to the degree of soiling: The length and the intensity of the wash depend on how dirty your laundry is, which is the reason why your appliance can vary the length of the wash cycle by up to 40% according to the selected set- tings (see page 9).

- Adjustment to the type of textile: Cotton shirts and cashmere pullovers do not demand the same wash, which is the reason why your washing machine adapts its tumble speed to each type of textile.

For your information : The time shown on the washing machine when you select a programme corresponds to the time for an average load. This time is adjusted, once the appliance has taken its measurements and then throughout the pro- gramme, according to any unexpected events (too much washing powder, an unbalanced load when spinning, etc.).

- Easy start

Your washing machine memorises your habits. Every time a programme starts, the machine records the options that you use most frequently, and proposes these same options as soon as you switch on the appliance.

- Opti 4 Your washing machine can automatically optimise the length of the wash cycle and the water and energy consumption of every wash.

- Adjustment to the quantity of laundry: Washing 1kg of laundry is not the same as washing a full load, which is the reason why your washing machine is equipped with sensors that detect the quantity of laundry in the drum and automatically calculate the right levels of water and energy required to produce a perfect wash.

- Adjustment to the hardness of the water: The hardness of the water in your mains supply affects the wash and rinse performances of your appliance, which is the reason why your washing machine automatically adapts the tumble time and the number of rinses to produce a perfect result. The water hardness is adjusted when you use your washing machine for the first time (see special insert).

4 - REGULAR CARE

4.1 - AvoIdIng bad smells Follow the evacuation pipe installation instructions in paragraph 1.3, leave the view port open at the end of the cycle. Complete an empty cycle with a washing agent at 60C or 90C once a month.

4.2 - Detergent drawer (Diagram 4.1) Remove the detergent drawer by pulling and pressing the softener part. Remove siphon A and rinse everything under the tap. Re-install the detergent drawer siphon, then put everything back in its place.

4.3 - PUmp fIlter (Diagram 4.2) Open the service flap A . Place a suitable recipient under the service flap to collect the water. Gently unscrew filter B . Water may run out; this is normal. Remove any lint and residues before carefully replacing the filter. Screw the filter back in. Close the service flap.

4.4 - OUtsIde panels Do not use abrasive products or scourers. Use liquid soap. Dry with a soft cloth.

12EN

5 - PROBLEMS

Incidents may arise when using your washing machine:

If the screen shows one of the following errors and an alarm beeps, before calling Customer Service:

check whether: the water tap is open.

5.1

check whether: - the view port is not closed properly. - the drump is block

5.2

check whether: The pump filter is clogged ; clean the filter (paragraph 4.3).

5.3

Problems: causes / Remedies: The buttons do not work: - The child safety device is activated. The washing machine will not start: - The appliance is not plugged in or there is a power cut.

- You havent pressed the Start/Pause button. - You have programmed a delayed start. - See problems 5.1 and 5.2

The linen is not or not sufficiently spun: - You have selected a programme without spin drying or with limited spin drying. - The spin safety system has detected poor distribution of the

washing in the drum : unfold the linen and programme another spin cycle.

- Check the height of the curved drain part G (Diagram 1.4).

A puddle of water forms on the floor: First remove the plug from the socket and turn off the water supply. - Check that the seals F are fitted and the connectors are

tightened (Diagram 1.3). - Check the curved part is positioned correctly G (Diagram 1.4). - Check that the filter of pump B is correctly closed B

(Diagram 4.2)

Strong vibrations when spin drying: - The washing machine has not been released correctly (Diagram 1.1.3).

- The floor is not level (paragraph 1.2). The machine does not drain: - You have programmed Full drum stop.

- The drain hose is bent or squashed (Diagram 1.4). - See problem 5.3.

The view port doesnt open: - The programme has not yet finished. - The water level is too high (above the bottom of the view port). - Wait until the temperature inside the machine drops.

At the end of the programme, the detergent tray has traces of detergent:

- The detergent was poured into a wet drawer. - Check the water pressure. - You have poured too much washing product into the drawer

and exceeded the maximum recommended. All the lights are off at the end of the pro- gramme:

- All the lights automatically switch off no more than 5 minutes after the end of the programme in order to save energy. Press any button to restart the display.

Here are a few points to check:

Note on operation - this is not an incident : The programme time decreases or increases during the wash

This is not a fault. The length of time displayed at the start of the programme is updated according to the load in the machine (automatic weighing). This gua- rantees perfect washing results and water and energy consumption appropriate to the load. This is normal. The spin safety and anti-foam systems may extend the initial programme time displayed.

13 EN

1

80cm maxi

60cm mini

/o 34mm mini

1.4

13mm

13

E

1.1.1 1.1.2

1.1.3

1.3

C D

1.2

A

B

F

G

14EN

- 12

3

2.1 2.2

3.2.1 3.2.2

3.2.3 3.2.4

3.2.5 3.2.6

C

h : min

rpm

C

h : min

rpm

C

h : min

rpm

C

h : min

rpm

C

h : min

rpm

C

h : min

rpm

h : in

rp

15 EN

A

A

B

4

2.4

1.4

3.2.11

C

h : min

rpm

h : min

rpm

3

3.2.7

C

h : min

rpm

3.2.8

3.2.9 3.2.10

C

h : min

rpm

C

h : min

rpm

h : min

rpm

C

h : min

rpm

Any work on your appliance must be carried out by a qualified professional who is a dealer of the brand. When you call, so that we can handle your case efficiently, make sure you have the full references of your appliance (commercial reference, service reference, serial number). This information is on the ID plate (Diagram 1.1.1).

Original parts: When work is required, request exclusively original ce

Manualsnet FAQs

If you want to find out how the BAM84WSUA Brandt works, you can view and download the Brandt BAM84WSUA Washing Machine User Manual on the Manualsnet website.

Yes, we have the User Manual for Brandt BAM84WSUA as well as other Brandt manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Brandt BAM84WSUA. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brandt BAM84WSUA Washing Machine User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brandt BAM84WSUA Washing Machine User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brandt BAM84WSUA Washing Machine User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brandt BAM84WSUA Washing Machine User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Brandt BAM84WSUA Washing Machine User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.