Brandt VAP9831E Dryer User Manual PDF

1 of 31
1 of 31

Summary of Content for Brandt VAP9831E Dryer User Manual PDF

30

Dear Customer,

You have just acquired a BRANDT dryer and we would like to thank you. We have invested all our dedication and know-how in this appliance to best meet your needs. With strong innovation and performance, this appliance is designed to be easy to use.

In the BRANDT product range, you will also find a wide choice of ovens, microwaves, cooking hobs, ventilation hoods, cookers, dishwashers, washing machines,fridges and freezers, that could complement with your new BRANDT dryer.

Visit our website www.brandt.com where you will find all of our products, as well as useful and complementary information.

BRANDT

As part of our commitment to constantly improve our products, we reserve the right to make changes to the products specifications and features in the pursuit of technological advances.

Warning : Before installing and using your appliance, please read this Installation and Usage,

which will allow you to quickly familiarise yourself with its operation.

31

CONTENTSEN

1 / FOR THE USERS ATTENTION

Safety instructions ______________________________________ 32

Protection of the environment ____________________________ 33

2 / DESCRIPTION OF YOUR APPLIANCE

General presentation of the tumble dryer ____________________ 34

The steam tank ________________________________________ 35

3 / INSTALLING YOUR TUMBLE DRYER

The appliances surroundings ____________________________ 36

Levelling ______________________________________________ 36

Before using the Steam program for the first time ____________ 37

Built-in installation ______________________________________ 37

Combined washer/dryer installation ________________________ 37

Electrical connection ____________________________________ 38

4 / PREPARING YOUR LAUNDRY

Checking the condition of your laundry ____________________ 39

Loading laundry into the drum ____________________________ 39

5 / PROGRAMMING

Presentation of the control panel __________________________ 40

Drying programs ________________________________________ 40

"Steam" programs ______________________________________ 42

Your dryers programs __________________________________ 45

Options________________________________________________ 46

6 / REGULAR MAINTENANCE

Filling the steam tank ____________________________________ 48

Cleaning the steam tank __________________________________ 49

Cleaning the filter ______________________________________ 50

Emptying the condensor tank ____________________________ 50

Direct evacuation of water condensor ______________________ 51

Cleaning the condensor __________________________________ 52

Cleaning the appliance __________________________________ 52

Changing the bulb ______________________________________ 53

7 / PERIODIC MAINTENANCE

Cleaning the filter housing ________________________________ 54

Cleaning the condenser housing __________________________ 54

8 / TROUBLESHOOTING ______________________________________ 55

9 / AFTER-SALES SERVICE ____________________________________ 57

32

EN 1 / FOR THE USERS ATTENTION

Important : Keep these operating instructions with

your appliance. If you should sell your machine or give it to someone else, ensure that the operating instructions are provided. Please take note of these safety instructions before installing and using your appliance. They have been written for your safety and that of others.

SAFETY INSTRUCTIONS Installation When you receive the appliance, unpack it or have it unpacked immediately. Check that it has not suffered any damage during trans- port. Express any reservations in writing on the delivery slip and keep a copy. Never connect a damaged appliance. If your appliance is damaged, please contact your dealer. Before connecting your appliance, please refer to the installation instructions. Your tumble dryer must be kept disconnec- ted from the mains supply throughout the whole installation process. The electrical connection details shown on your appliances information plate must match those of the local mains supply. Once your appliance has been installed, the electrical plug must remain accessible. Do not alter or try to alter the appliances characteristics. This could be dangerous. If your installation requires alteration, only entrust the electrical and plumbing work to qualified electricians and plumbers. The appliance must not be installed behind a locking door, a sliding door or a door with hin- ges on the opposite side to those on the dryer. Your appliance is designed for normal domestic use. Do not use it for commercial or industrial purposes or for any purpose other than the one for which it has been designed

Childrens safety This appliance must only be used by adults. Do not let children play with the appliance and keep pets away from it. Keep young children away from the appliance when it is operating. Keep the packaging materials out of chil- drens reach (e.g.: plastic bags, polystyrene, etc.) because they can be dangerous for chil- dren : risk of suffocation. This appliance is not intended for use by per- sons (including children) with reduced physi- cal, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed concerning use of the appliance by the person responsible for their safety.

Use Important : Your tumble dryer is designed for

domestic use only, for drying laundry suitable for tumble drying.

Important : You must observe the following instruc-

tions. We decline any responsibility and res- cind the guarantee if these recommendations are ignored : failure to observe them can result in material damage and physical injury.

Use your appliance in accordance with its method of use, thereby avoiding injury to your- self and damage to your items. Do not use sol- vents in the appliance (risk of fire and explo- sion). Strictly comply with the care instructions on your laundry. If you have to open the door of the drum during the drying cycle, ensure that you do not touch the drum immediately, as it is very hot.

33

EN 1 / FOR THE USERS ATTENTION

Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers, turpentine or wax must be removed before drying in your machine (by using an adapted warm water washing programme with additional detergent for example). Precautions for using stain-removing products : any preliminary treatment by solvent, stain-remo- ver, aerosol, such as acetone, alcohol, gasoline, kerosene, trbentine is prohibited because these products are very inflammable. If your laundry requires this type of treatment, this must be done before washing. Similarly, we recommend that you do not use these products near to your dryer or, in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an explosion. If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see TROUBLESHOOTING), contact our Technical Service Center. Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power cable flush with the appliance and disengage the door lock. For your safetys sake, if you wish to change your appliances power cable, contact a qualified electrician. If any operating anomalies occur, disconnect your appliance and call our Technical Service Center.

ENVIRONMENTAL PROTECTION The appliances packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate that in countries that are a members of the European Union the used appliances should not be mixed with other waste. This way, the appliance recycling orga- nised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment.

Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you for doing your part to protect the environment.

ENERGY SAVINGS Spin your laundry at high speeds ; the residual dampness will be low, as will your energy consumption. Even synthetic textiles must be spun before drying. Place the maximum load in your machine ; this will optimize the energy used. When doing so, comply with the indications on volume provided in this instruction manual. The drying time and the energy consumption are both increased by a high ambient temperature and too small a room. Clean the filter after each drying cycle. Clean the condenser twice a month.

34

EN 2 / DESCRIPTION OF YOUR APPLIANCE

Fig. 01

B

A

D

F

C

E

GENERAL PRESENTATION OF THE TUMBLE DRYER

Control panel

Condensor tank

Condensor grill

Filter

Rating plate (Reference for After-Sales)

Adjustable feetF

E

D

C

B

A

35

EN 2 / DESCRIPTION OF YOUR APPLIANCE

THE STEAM TANK

Important : The Steam tank must be filled only with demineralised water or

with water from the recovery tank provided that it has been filtered using the filter provided for this purpose on the steam tank inlet.

Steam tank

Fig. 02

36

EN 3 / INSTALLING YOUR TUMBLE DRYER

Fig. 04

Fig. 03

THE APPLIANCES SURROUNDINGS

Important : We strongly advise against :

Installing your appliance on a carpeted floor. If you cannot avoid this, take all possible mea- sures not to obstruct the circulation of air at its base. Installing your dryer in a location where it can be subject to being splashed with water. Installing your dryer in a small closed room (if this is the case, open the door or the win- dow during drying). Installing your dryer in a poorly ventilated room. The temperature in the room must remain below 30C during drying.

1 cm mini

Advice : Your tumble dryer releases heat. If you place it next to another appliance or a unit, we

advise you always to leave a space in-between for air circulation (Fig. 03).

Important : Use a level to check that the appliance

is horizontal :

Your dryer is fitted with 4 adjustable feet (Fig.04). To adjust the stability and levelness : Tip it slightly backwards. Screw one or more of the feet in or out using a spanner or a screwdriver to adjust their height to suit the shape of the floor (Fig.04). Set your dryer back on its feet and check that it is stable.

LEVELLING

0.4 inches minimum

37

EN 3 / INSTALLING YOUR TUMBLE DRYER

BEFORE USING THE STEAM PROGRAM FOR THE FIRST TIME

Important : The Steam tank is empty when your appliance is delivered. Before using the Steam pro-

gram for the first time, fill the tank with demineralised water or with water from the recovery tank (see how to proceed in the "EVERYDAY MAINTENANCE" chapter).

The steam tank is empty when your appliance is delivered.

BUILT-IN INSTALLATION

COMBINED WASHER/DRYER INSTALLATION

Important : If you are fitting the appliance underneath a worktop, you must either keep the original

laminated top, or replace it with a slimmer version using a kit available for this purpose from your dealer. For safety reasons, the appliance must never be operated without a top.

An adaptation kit is available from your dealer. This is used to mount your tumble dryer above your washing machine.

Important : Check with your dealer that the kit is compatible with your washing machine. For safety rea-

sons, fitting must be performed by a qualified professional.

38

EN 3 / INSTALLING YOUR TUMBLE DRYER

ELECTRICAL CONNECTION

Danger : To make the electrical connection to your appliance :

Do not use an extension, an adapter, a multiple socket or a programmable timer. The plug must be easily accessible but be out of childrens reach. If there's any doubt about the condition of your installation, contact your installer or a qualified Brandt-approved professional. Never eliminate the electrical Earthing system.

The electrical installation must comply with the prevailing standards and the Electricity Boards regulations in the country concerned, particularly regarding Earthing and installation in shower rooms.

We cannot be held responsible for any incident caused by poor electrical installation.

Advice : In order to easily find your appliances reference numbers in the future, we recommend

that you note them down on the After-Sales Service and Consumer Relations page (this page also explains where to find these on your appliance).

Your appliance complies with European Directives 2006/95/EEC (Low Voltage Directive) and 2004/108/EEC (Electromagnetic Compatibility).

REPLACING THE ELECTRIC POWER CABLE

Important : To ensure your safety, this must be carried out by the manufacturer's after-sales service

team or a qualified professional.

39

EN 4 / PREPARING YOUR ITEMS

Fig. 05

Always adhere to the manufacturer's ins- tructions when using softening products.

Advice : If, before you insert your clothes in the

tumble dryer, you notice any stains, even after washing, do not dry the items concer- ned. As a general rule, stains that have been ironed or tumble-dried can no longer be removed. Please refer to the instructions for treating stubborn stains provided in most washing machine instruction manuals and, in particu- lar, wash the stained items again.

Preparing your laundry : Close all zippers and snap buttons. Remove any loose buttons, pins or hook fasteners. Knot any belts, apron strings, etc... Empty pockets, especially lighters and mat- ches.

Special notes on steam programs : Sort the laundry by fabric type Do not mix new coloured fabrics with white fabrics.

CHECKING THE CONDITION OF YOUR LAUNDRY

Important : Do not tumble-dry the following

articles : Clothing including rubber like materials (for example: shower caps, waterproof clothing and textiles, linings, pillows etc.) Chlorofibres (Thermolactyl* for example) *Registered trademark Items containing underwiring that could become detached Bulky items (duvets, eiderdowns, etc...) Laundry that has not been spun Laundry cleaned with inflammable chemi- cals.

Important : Check the labels on your laundry

Normal drying

Gentle drying

Do not tumble dry

LOADING LAUNDRY INTO THE DRUM

Open the door by pushing (press where the label is) (Fig. 05). Check that the filter is in its housing . Insert washed and spun clothes loosely in the drum without folding it or piling it up. Take care not to let any fabrics get caught in the door. Close the door.

Recommended loads : The maximum capacity of the dryer is 9 kg. To reduce creasing and optimize drying times, we recommend you do not overload the machine. To optimise the performance of the wrinkle- removing cycles, we recommend that you limit the quantity of laundry at 2 kg.

40

EN 5 / PROGRAMMING

Programs dial Tumbling Buzzer Additional drying

Delayed start - Delayed start + Start/Pause On/OffH

G

F

E

D

C

B

A

DRYING PROGRAMS

Your appliance has two functions : - a drying function that includes 8 programs - a steam treatment function that includes 3 programs

Your appliance is equipped with an automatic dryness detection system. The appliance will stop when the chosen level of dryness has been achieved (see the program chart on the following pages).

Starting the appliance : Check that the power cable is plugged in. The appliance will not start unless the door is properly closed. Press the On/Off button Select your program (see the table Your dryers programs on the following pages) by turning the Programs dial (it turns in both directions). The indicator light shows you the program you have selected. Press Start/Pause and the program will start. (The In use indicator lights up).

Time remaining : The time displayed at the start of a cycle corresponds to a full load. It is provided for informatio- nal purposes. The actual time adjusts during the cycle based on the load of laundry. When the cycle begins, the "Time remaining" symbol flashes . This symbol turns to a steady light when the remaining time has been calculated.

Pause Stop Pause Stop Pause Stop

Pause Stop

Pause Stop

Pause Stop

Pause Stop Pause Stop

Pause Stop Pause Stop

Pause Stop

Pause Stop

Pause Stop

G

H

PRESENTATION OF THE CONTROL PANEL

Pause - Drying - Cooling down - End of program

Program progress : Time remaining

Pause Stop

S T E A M P O W E R Cotton

VAP9831E

+

- Start / Pause On / Off

Condenser dryer

Delayed start

Mixed

Stretch

Delicates

MADE IN FRANCE

Cotton

Mixed

STEAM

A B C D E G HF

41

EN 5 / PROGRAMMING

Adding or removing an item during drying : Press Start/Pause to interrupt drying and open the door. Insert or remove the item or items and close the door. Press the Start/Pause button to resume drying.

Advice : To ensure the effectiveness of the Steam

programs, you are discouraged from interrup- ting these programs mid-cycle.

Altering programming or drying during operation : If you have entered the wrong program, you can change your selection during the cycle. Press Start/Pause to interrupt drying. Select another program using the program dial. Press the Start/Pause button to resume drying.

Cooling cycle : All programmes finish with a cooling cycle that lasts for a few minutes to allow the washing to cool gradually.

Important : Do not stop your dryer before this cycle

has finished.

End of program and appliance stop : At the end of program, the display shows 0:00. The Filter and Tank Full lights flash alternately to remind you that you must clean the filter and empty the water collection tank after every drying cycle: Press the On/Off button . Empty your drier. Clean the filter and empty the water collection tank (see the REGULAR MAINTENANCE sec- tion).

H

G

G

G

G

Advice : Consult the Programs table on the next page to determine the program needed for the type

of items.

Program stop

Time remaining

End of program

The Filter and Tank Full lights flash

Cooling cycle

42

EN 5 / PROGRAMMING

Cotton program : Thanks to the combined action of steam and laundry tumbling, this program allows you to rid "Cotton"-type textiles of wrinkles to facili- tate their ironing. This program lasts 18 minutes. Choose your program using the Programs dial . The indicator lights up, displaying your choice. Validate by pressing the "Start/Pause" button

.G

A

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

Mixed program : Thanks to the combined action of steam, tum- bling and laundry preheating, this program allows you to rid "Mixed"-type textiles (polyes- ter, synthetics, etc.) of wrinkles to facilitate their ironing. This program lasts 20 minutes. Choose your program using the the Programs dial . The indicator lights up, displaying your choice. Validate by pressing the "Start/Pause" button

.G

A

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

"STEAM" PROGRAMS

Your appliance is equipped with 3 STEAM programs : - Cotton - - Mixed -

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

- Refresh -

Thanks to their steam action, the "Cotton" and "Mixed" programs allow you to gently remove wrin- kles from your laundry and soften creases, whether the fabric was air dried or put through the dryer. As a result, your ironing becomes faster and easier and some items can even be put away without ironing. The Steam refresh program lets you "air" and freshen laundry that has been shut away in a clo- set.

Important : These programs can only be used for laundry that is already dry, just before ironing. We

recommend that you do not exceed the recommended load (see chart on following pages).

Important : The steam programs should not be used with the following textiles: knitted wool; leather;

clothing with metal, wood or plastic notions; clothing made from metal that may rust; oilskin or other similarly coated garments.

Important : The Steam tank is empty when your appliance is delivered. Before using the Steam pro-

gram for the first time, fill the tank with demineralised water or with water from the recovery tank (see how to proceed in the "EVERYDAY MAINTENANCE" chapter).

Important : Before starting a Steam program ensure that :

The amount of water contained in the tank is above the "Min." level The drying filter has been cleaned

Cott n

Mixed

STEAM

otton

ixed

Stretch

Delicates

Cotton

Mixed

Stretch

Delicates

Cotton

Mixed

STEAM

43

EN 5 / PROGRAMMING

Steam refresh : Thanks to the steam action, this program allows you to eliminate odours from laundry that has been put away in a closet. This program lasts 20 minutes. Choose your program using the Programs dial

. The indicator lights up, displaying your choice. Validate by pressing the "Start/Pause" button .

End of program and automatic tum- bling at the end of the "Steam Program" cycle : At the end of the Steam programs and during the tumbling phase, the display indicates End. Tumbling is activated as soon as the selected program is completed. During the tumbling phase, the drum rotates constantly to prevent the laundry from settling and wrinkling. This phase lasts 30 minutes. During the tumbling phase, you can remove the laundry from the drum after pressing the Start/Pause button. This action terminates the tumbling phase and makes it possible to empty the drum with the light on. The Filter and Full tank indicator lights blink alternately to remind you to clean the filter and empty the water recovery tank after each cycle.

G

G

A

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

Remarks : During the tumbling phase, if you have selected the "Buzzer" option, it will sound every

minute.

Advice : To optimise the effectiveness of the steam programs, we advise you to :

Remove the entire load, one item at a time, as soon as the program ends or during the tum- bling phase Place the clothing on hangers Promptly iron the garments, if necessary

Remarks : It is normal for the garments to be slightly damp at the end of the Steam programs. This is

to make ironing easier. Similarly, with small loads of laundry, it is possible to have damp spots after a steam program.

End of program

The Filter and Full tank indicator lights blink

44

EN 5 / PROGRAMMING

Pause Stop Pause Stop Pause Stop

Pause Stop

Pause Stop

Pause Stop

+

-

Pause Stop Pause Stop

Pause Stop Pause Stop

Pause Stop

Pause Stop

Pause Stop

During the cycle : 1 - Tank full : Your tank is full during the drying cycle. The appliance stops during the program. The Tank Full turns on, the time remai- ning flashes. Proceed to empty your water collection tank (see the REGULAR MAINTENANCE sec- tion). Press Start/Pause to restart your pro- gram.

2 - Tank empty : Your Steam tank becomes empty during a steam wrinkle rid cycle. The appliance stops during the program. The "Empty tank" and Pause indicators lights up, an exclamation mark symbol is dis- played on the screen, and the time remaining flashes. Proceed to fill up your Steam tank (see the REGULAR MAINTENANCE section). Press Start/Pause to restart your pro- gram.

G

Cotton

Mixed

STEAM

Cotton

Mixed

Stretch

Delicates

G

Important : Only fill the Steam tank with distilled water or fully demineralised water. Do not use tap

water or water containing any additives. The water from the recovery tank can also be used pro- vided that it has been filtered using the filter provided for this purpose on the steam tank inlet.

Program stop

TheTank Full light illuminates.

Program stop

The "Empty tank" and Pause indicators lights up, an exclamation mark symbol is dis- played.

45

EN 5 / PROGRAMMING

Programs Type of laundry Drying results

COTTON -

Stretch

Cotton

Delicates

Mixed

Extra Drying -

Stretch

Cotton

Delicates

Mixed

Cotton Dry

Dry -

Stretch

Cotton

Delicates

Mixed

Cotton Dry

Damp -

Stretch

Cotton

Delicates

Mixed

Cotton Damp

MIXED-

Stretch

Cotton

Delicates

Mixed

Dry -

Stretch

Cotton

Delicates

Mixed

Regular laundry Dry

Damp -

Stretch

Cotton

Delicates

Mixed

Regular laundry Slightly damp

Other drying programs

Modern fibres - Stretch

Cotton

Delicates

Mixed

Synthetic Dry

Delicates -

Stretch

Cotton

Delicates

Mixed

Synthetic, Delicates Dry

Air wollens -

Stretch

Cot on

Delicates

Mixed

Wollens Dry

Drying programs :

YOUR DRYERS PROGRAMS

Steam programs :

RECOMMENDED PROGRAMS FOR TESTS TO EN 61121 - DIRECTIVE 95/13/EEC

Load I Dry cotton ..... 9 kg .... select Cotton - Dry

Load II Ready to iron Cotton ..... 9 kg .... select Cotton - Damp

Load III Easy maintenance textiles ..... 4 kg ... select Modern fibres

Programs Load type Maximum

weight Duration

(min) consumption

water (litry) energy (kWh)

Cotton -

Stretch

Cotton

Delicates

Mixed Cotton shirts 10 items 18 0,4 0,20

Cotton home linens 2 kg 18 0,4 0,20

Mixed -

Stretch

Cotton

Delicates

Mixed

Synthetic shirts 10 items 20 0,4 0,35

Synthetic home linens 2 kg 20 0,4 0,35

Refresh -

Stretch

Cotton

Delicates

Mixed

Cotton or synthetic 2 kg 20 0,1 0,06

46

EN 5 / PROGRAMMING

Confirm by pressing theStart/Pause button .

Once the time delay has expired, the pro- gram starts. The screen tells you the time remaining, which becomes more precise as the drying cycle progresses.

Tumbling option : The Tumbling function fluffs the textiles every 10 minutes for up to 24 hours, until the door is opened or the machine is turned off. It begins as soon as the drying finishes and prevents the clothes from settling in the machine. To select this function, press the Tumbling button. An indicator lights up to show that this option has been activated.

Buzzer option :

B

G

Remarks : The Tumbling and "Buzzer" options remains selected from one program to the next. You can

simply press the button to deactivate thes options, even during a program

THE OPTIONS

Delaying a programs start : This option is not available for Steam pro- grams Select your program using the Program dial

. The indicator light shows you the pro- gram you have selected. Press the Delayed Start + button to delay the start of your program thirty minutes at a time until you reach the desired delay time (max 23 hours). To decrease the diffe- red starting time, press the Dpart diffr - button .E

F

A

Press the Buzzer button . At the end of drying, three beeps will sound every 10 minu- tes for one hour until the door is opened or the appliance is stopped. The indicator light corresponding to this option lights up at the bottom of the screen, indicating that the buz- zer is activated.

C

Time remaining until drying cycle begins

Delayed start

Buzzer option

Tumbling option

47

EN 5 / PROGRAMMING

Additional Drying option : This option is not available for Steam pro- grams This function enables you to add drying time at the end of a program in units of 10 minutes by successively pressing the Additional Drying button . Press the Start/Pause button. The additional drying time is added at the end of the selected program.

MEMO ACTIV function : Your dryer remembers the programs that you use most often. After a few drying cycles, the program displayed when you switch on your machine is the one that you have used most often.

D

Stretch

Cotton

Delicates

Mixed

Additional time

Important : A power failure cancels the current program. In this case, therefore, you have to reset all

the programming operations.

Advice : As a safety measure, you are advised to unplug the power cable when you are not using

the appliance.

48

EN 6 / REGULAR MAINTENANCE

FILLING THE STEAM TANK

Important : We remind you that the tank must be fil-

led before the "Steam" program is used for the first time.

Important : Only fill the Steam tank with distilled

water or fully demineralised water. Do not use tap water or water containing any additi- ves. The water from the recovery tank can also be used provided that it has been filte- red using the filter provided for this purpose on the steam tank inlet.

To fill the tank, proceed as follows : Press on the upper part of the tank to free it from its housing (Fig. 06). Fill the tank (Fig. 07). Press on the upper part of the tank to re- seat it in its housing.

You can also use the water from the recovery tank : Remove the water recovery tank (see fig. 20 on the next page). Extract the channeling tube from the water recovery tank (Fig. 08). Fill the tank (Fig. 09). Press on the upper part of the tank to re- seat it in its housing.

Important : If you use water from the recovery

tank, regularly clean the tank filter by pulling pills away with your fingers (Fig. 10).

Fig. 06

Fig. 07

Fig. 10

The 1.2 litre steam tank contains enough water to last approximately three cycles.

It is equipped with a filter that recovers the impurities found in the water. Properly filtered water is necessary for smooth functioning of the steam generator.

Fig. 08

Fig. 09

49

EN 6 / REGULAR MAINTENANCE

CLEANING THE STEAM TANK

Advice : If you have not used the Steam pro-

gram for several months, we recommend that you replace the water contained in the tank.

To clean the inside of the tank, you should completely remove it from its housing.The tank lock is located inside the door (Fig. 11).

To clean the tank, proceed as follows : Press on the tank to open it. Use the side of a coin to unlock the tank (Fig. 12). Remove it from its housing by pulling it from bottom to top (Fig. 13). Simultaneously push on both sides of the upper part of the tank and unclip the cover (Fig. 14). Clean the inside of the tank, as well as the filter, which can be immersed in water (Fig. 15). Clip the cover back onto the tank. Return the tank to its housing, seating the lower part first. Press on the upper part of the tank to re- seat it in its housing.

Fig. 11

Fig. 14

Fig. 13

Fig. 12

Fig. 15

50

EN 6 / REGULAR MAINTENANCE

Important : The dryer must not operate without the fil-

ter.

Important : Please remember that the filter must be

cleaned after every drying or steam cycle.

This is located in the lower part of your dryer. Clean it as follows : Remove it from its housing by pulling it upwards (Fig. 16). Open the filter (Fig. 17). Clean it by removing the thin coating of lint covering it (Fig. 18).

Ensure that there is no lint accumulating round the dryer.

Important : Do not wash filter with water. (Fig. 19).

Re-insert it in its housing, pushing it well in.

Fig. 16

Fig. 17

Fig. 18

Fig. 19 This is located at the top of your appliance. It col- lects the water extracted from your items as they are dried. To empty it, release it from its housing by pul- ling it towards you (Fig. 20). Empty the tank or recover the condensation container (Fig. 21).

Important : The condensor tank must be emptied

after each drying cycle.

Important : Risk of frost : if there is a risk of frost,

empty the condensor tank.

Fig. 20

Important : empty the condensor tank if you wish to move or tilt your appliance.

Advice : You can store the recovery tank water in a separate container. You can later use this water

to fill the Steam tank.

Fig. 21

CLEANING THE FILTER

EMPTYING THE CONDENSOR TANK

51

EN 6 / REGULAR MAINTENANCE

90 c

m m

ax i

Fig. 24

Fig. 22

Fig. 23

To avoid having to empty the collection tank every time you use the appliance, you have a kit (*) for removing the water from the condenser directly into the drain (hose and deflector). To fit this : Take off the existing pipe and push it inside the appliance (Fig. 22). Clip the deflector with the top of the pump (Fig. 23). Connect the hose from the kit to the end connector on the appliance (Fig. 24).

You can connect the other end of the hose either : - To a ventilated trap (Fig. 25). - Or a sink trap (Fig. 26).

When connecting to a trap, you must remove the fil- ler plug. Then press home the rubber tip. If neces- sary, add a clamp connection (Fig. 26).

Important : The deflector must necessarily be positioned

before the drain hose connection to avoid any water splashes when taking off the hose.

Remarks : Directly emptying the condenser water into

the sewage system will prevent the reuse of the recovery water for steam programs.

Fig. 26

Fig. 25

DIRECT EVACUATION OF WATER CONDENSER

Dflecteur Encart

Tuyau

Remarks : (*) This kit is provided with the appliance

or is available near your After-sales service under the ref. 57X3184 (according to model).

eflector

Hose

Insert

52

EN 6 / REGULAR MAINTENANCE

Fig. 27

Fig. 28

Fig. 29

Fig. 30

Important : The condensor must be cleaned twice a

month.

Important : Unplug the power cable from the socket

before cleaning the condensor.

Open the grill at the front of the appliance. Release the condensor (Fig. 27). Remove it carefully (Fig. 28). Remove any lint from the condensor. Clean it with water only under the tap (Fig. 29). After cleaning, ensure that none of the tubes are blocked and that the fins are clean. Rub it superficially. Re-insert the condensor and lock it in place. Close the grill.

Important : When refitting the condensor, ensure that it

is pushed in firmly right to the back of its housing when locking it in.

CLEANING THE CONDENSOR

Advice : To clean the control panel, the access to the

drum and the casing, use only a sponge or a damp cloth and some soapy water.

Ensure that there is no fluff accumulating round the dryer.

Clean the door seal with a damp cloth. Clean the filter housing with your vacuum cleaner once a year.

You should not use, under any circumstances (Fig. 30) : Abrasive powders Metal or plastic sponges Alcohol-based products (alcohol, thinners, etc.)

CLEANING THE APPLIANCE

53

EN 6 / REGULAR MAINTENANCE

Fig. 31

CHANGING THE BULB

You can replace the light bulb (type E14- 15W/230V) yourself (Fig. 31).

Important : Unplug the power cord before chan-

ging the bulb.

To do this : Unscrew the glass cover located to the left inside the appliance. Unscrew the extinguished bulb and replace it. Screw on the glass cover tightly.

Important : The bulb must be replaced when the

appliance is cooled down.

54

EN 7 / PERIODIC MAINTENANCE

Fig. 32

Fig. 33

Fig. 34

To clean the filter housing, proceed as fol- lows: Remove the filter from its housing (see Cleaning the filter paragraph, previous pages) Use a Hoover to remove all pills and lint (Fig. 32). Return the filter to its housing, pushing it firmly into place.

CLEANING THE FILTER HOUSING

To optimise the performance of your dryer, we recommend that you carry out the following clea- ning actions once or twice each year :

To clean the condenser housing, proceed as follows : Remove the condenser from its housing (see Cleaning the condenser paragraph, previous pages). Use a Hoover to remove all the pills and lint from the sides of the cavity (Fig. 33 & Fig. 34). Return the condenser to its housing, locking it into place, and clip the grill back on.

CLEANING THE CONDENSER HOUSING

55

8 / TROUBLESHOOTING

Fault : Check whether : The dryer does not start : - The plug is in the socket

- The On/Off button is pressed in - The door is properly closed - The condensor is correctly locked in place.

The drying times are too long : - The filter in the drum is clogged with lint. - The condensor is not clogged. - The filter and condensor housings are not clogged or

soiled. - The laundry has been spun enough beforehand

(500rpm minimum, but spinning at 850rpm provides shorter drying times).

- The room temperature is not too high, particularly if the room is small : if necessary, open the door or win- dow.

- The air inlets and outlets are unobstructed enough to ensure correct air circulation.

- The selected drying program does indeed correspond to the type of laundry in the drum.

The laundry is too damp : - The filter in the drum is clogged with lint - The type of drying has been selected correctly (too

low) : switch to the next program up or increase the drying time.

- The condensor is not blocked by lint.

The laundry is too dry, too creased : - The selected drying program does indeed correspond to the type of laundry in the drum.

Advice : Some incidents may arise when you are using your dryer. Here are the points you should

check, before contacting the After sales service.

EN

56

EN 8 / TROUBLESHOOTING

Fault : Check whether : The items are unevenly dried : - The types of laundry in the load are too different (e.g.

sheets together with jeans) - The laundry has been laid correctly unfolded in the

dryer - The drum is not overloaded.

The synthetic items are loaded with static electricity :

- The laundry has been dried too much - You have used softener during washing. By using this

product, you can reduce most of the problems with static electricity.

The Tank Full indicator light is lit : - The condensor tank is full : once you have emptied it, re-insert it correctly, pushing it completely into its housing

The Tank Full indicator light illumina- tes although the tank is empty :

- The containor has been properly inserted : push it in completely.

- The condensor is tightly locked on the two sides.

The "Empty tank" indicator is lit up : - The steam tank is empty : after emptying it, put it back into position, pressing it firmly into the housing. The program picks up where it had stopped.

The laundry will be slightly damp after a steam cycle :

- You have used a steam programme : in this case, it is completely normal, and it will make ironing easier.

57

EN 9 / AFTER-SALES SERVICE

Fig. 35

Any work on your appliance must be perfor- med by a Brandt-approved qualified professio- nal. When you call, mention your appliances full reference (model, type, serial number). These details are shown on the manufacturers information plate (Fig. 35).

ORIGINAL PARTS During any maintenance work, ask that only certified original replacement parts be used.

INTERVENTIONS

58

EN NOTES

59

EN NOTES

EN

Any maintenance on your equipment should be undertaken by: - either your dealer, - or another qualified mechanic who is an authorized agent for the brand appliances. When making an appointment, state the full reference of your equipment (model, type and serial number). This infor- mation appears on the manufacturer's nameplate attached to your equipment.

Les ventuelles interventions sur votre appareil doivent tre effectues : - soit par votre revendeur, - soit par un autre professionnel qualifi dpositaire de la marque. Lors de votre appel, mentionnez la rfrence complte de votre appareil (modle, type et numro de srie). Ces rensei- gnements figurent sur la plaque signaltique fixe sur votre appareil.

Eingriffe an Ihrem Gert drfen nur: - von Ihrem Hndler oder - von einem sonstigen Fachmann und Vertragshndler der Marke durchgefhrt werden. Geben Sie bei der Meldung einer Strung die vollstndige Typenbezeichnung Ihres Gertes an (Modell, Typ, Seriennummer). Diese Angaben finden Sie auf einem an Ihrem Gert angebrachten Schild.

Las intervenciones que requiera la mquina debern ser efectuadas: - por el revendedor, - o por cualquier profesional cualificado depositario de la marca. Al llamar, mencione la referencia completa de la mquina (modelo, tipo y nmero de serie). Estos datos figuran en la placa de identificacin situada en la mquina.

Qualquer interveno no seu aparelho deve ser realizada: - quer pelo seu revendedor, - quer por outro profissional qualificado autorizado pela marca. Ao cham los, indique a referncia completa do seu aparelho (modelo, tipo e nmero de srie). Estas informaes figuram na placa de identificao fixada no aparelho.

Eventuel vedligeholdelse af apparatet skal foretages: - enten af Deres forhandler, - eller af en kvalificeret fagmand, som er anerkendt til dette mrke. Nr De ringer op, skal De angive apparatets fulde reference (model, type, serienummer). Disse oplysninger str p types- kiltet, der sidder p apparatet.

After Sales Service :

FR Service aprs vente :

DE Kundendienst :

ES Servicio postventa :

PT Servios autorizados :

DA Kundeservice :

De eventuele ingrepen in de machine moeten worden uitge- voerd : - of door uw vakhandelaar, - of door een andere gekwalificeerd technicus van dit merk. Tijdens het telefoneren, dient u de complete referentie op te geven van uw machine (model, type, serienummer). Deze informatie staat op het typeplaatje op de machine.

Wszelkie czynnoci serwisowe wykonywane na urzdzeniu musz by wykonane przez: - sprzedawc, - wyspecjalizowany zakad naprawczy posiadajcy atest pro- ducenta. Aby przyspieszy i uatwi obsug prosimy o podanie dokadnych danych dotyczcych urzdzenia (model, typ, numer seryjny). Wszystkie te dane znajduj si na tabliczce znamionowej umieszczonej na urzdzeniu.

Ppadn opravy na pstroji me provdt pouze : - v prodejce - nebo zrun opravna, kter m smlouvu s vrobcem Pi telefonickm styku uvdjte pln oznaen vaeho pstroje (model, typ a vrobn slo). Tyto daje jsou uvede- ny na vrobnm ttku pstroje.

, : - , ; - , . (, ). ! ", .

: - , - . , (, ). .

NL Serviceafdeling :

PL Usugi serwisowe :

CS Zrun servis :

RU Cepcoe ocyae :

EL T :

VAP 9831E

FA G

O R

B R

A N

D T

SA S

- l oc

at ai

re -g

r an

t - S

oc i

t p

ar a

ct io

ns s

im pl

ifi e

a u

ca pi

ta l s

oc ia

l d e

20 .0

00 .0

00 E

ur os

- R

Manualsnet FAQs

If you want to find out how the VAP9831E Brandt works, you can view and download the Brandt VAP9831E Dryer User Manual on the Manualsnet website.

Yes, we have the User Manual for Brandt VAP9831E as well as other Brandt manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Brandt VAP9831E. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brandt VAP9831E Dryer User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brandt VAP9831E Dryer User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brandt VAP9831E Dryer User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brandt VAP9831E Dryer User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Brandt VAP9831E Dryer User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.