Brandt EFE730F Dryer User Manual PDF

1 of 17
1 of 17

Summary of Content for Brandt EFE730F Dryer User Manual PDF

36

EN CONTENTS

1 / FOR THE USERS ATTENTION

Safety instructions ______________________________________ 37

Protection of the environment ____________________________ 38

Energy savings ________________________________________ 38

2 / DESCRIPTION OF YOUR APPLIANCE

General presentation of the tumble dryer __________________ 39

3 / INSTALLING YOUR TUMBLE DRYER

The appliances surroundings ____________________________ 40

Levelling ______________________________________________ 40

Built-under installation____________________________________ 41

Combined washer/dryer installation ________________________ 41

Modifying the door opening direction ______________________ 41

Electrical connection ____________________________________ 42

4 / PREPARING YOUR ITEMS

Checking the condition of your textiles______________________ 43

Inserting the items in the drum ____________________________ 43

5 / PROGRAMMING

Presentation of the control panel __________________________ 44

Programming a drying cycle ______________________________ 44

Your driers programmes ________________________________ 47

6 / REGULAR MAINTENANCE

Cleaning the filter ______________________________________ 48

Emptying the condensate container ________________________ 48

Connecting the water outlet directly to the drain. ____________ 49

Cleaning the condenser __________________________________ 50

Cleaning the appliance __________________________________ 50

7 / TROUBLESHOOTING ______________________________________ 51

8 / AFTER-SALES SERVICE ____________________________________ 52

Changing the bulb ______________________________________ 52

37

EN 1 / FOR THE USERS ATTENTION

Important : Keep these operating instructions with

your appliance. If you should sell your machine or give it to someone else, ensure that the operating instructions go with it. Please take note of these safety instructions before installing and using your appliance. They have been drawn up for your safety and that of others.

SAFETY INSTRUCTIONS Installation When you take delivery of the appliance, unpack it or have it unpacked immediately. Check that it has not suffered any damage during transport. Express any reservations in writing on the delivery note and keep a copy. Never connect up a damaged appliance. If your appliance is damaged, please contact your dealer. Before proceeding to connect up your appliance, please refer to the Installation Instructions. Your tumble dryer must be kept disconnec- ted from the mains supply throughout the whole installation process. The electrical connection details shown on your appliances information plate must match the those of the local mains supply. Once your appliance has been installed, the plug must remain accessible. Do not alter or try to alter this appliances characteristics. This could be dangerous for you. If your installation requires alteration, only entrust the electrical and plumbing work to appropriately qualified electricians and plum- bers. The appliance must not be installed behind a locking door, a sliding door or a door with hin- ges on the opposite side to those on the dryer. Your appliance is designed for normal domestic use. Do not use it for commercial or industrial purposes or for any other purpose than the one for which it has been designed

Childrens safety This appliance must only be used by adults. Do not let children play with the appliance and keep pets away from it. Keep young children away from the appliance when it is operating. When you have unpacked your appliance, keep the packing out of childrens reach. Keep the packaging materials out of chil- drens reach (e.g.: plastic bags, polystyrene, etc.) because they can be dangerous for chil- dren: risk of suffocation.

Use Important : Your tumble dryer is designed only for

domestic use, for drying textiles suitable for tumble drying.

Important : You must observe the following instruc-

tions. We decline any responsibility and res- cind the guarantee if these recommendations are ignored: failure to observe them can result in material damage and physical injury.

Use your appliance in accordance with its method of use, thereby avoiding injury to your- self and damage to your items. Do not use sol- vents in the appliance (risk of fire and explo- sion). Precautions for using stain-removing pro- ducts: Any preliminary treatment with solvents, stain- removers or aerosols is forbidden because these products are very inflammable. If your laundry requires this type of treatment, this must be done before washing. Similarly, we recommend that you do not use these pro- ducts near to your dryer or, in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an explosion. .

38

EN 1 / FOR THE USERS ATTENTION

Strictly comply with the care instructions on your laundry. If you have to open the door of the drum during the drying cycle, ensure that you do not touch the drum immediately, as it is very hot. If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see TROUBLESHOOTING), contact an appropriately qualified professional. Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power cable flush with the appliance and make the door lock inoperable. For your safetys sake, if you wish to change your appliances power cable, contact an appropria- tely qualified electrician. If any operating anomalies occur, disconnect your appliance and call your After-Sales Service.

ENVIRONMENTAL PROTECTION This appliances packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possi- ble conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collec-

tion points closest to your home. We thank you doing your part to protect the environment.

ENERGY SAVINGS Spin your textiles at high speeds; the residual dampness will be low, as will your energy consump- tion. Even synthetic textiles must be spun before drying. Place the maximum load in your machine; this will utilise energy optimally. When doing so, com- ply with the indications on volume we provide in this instructions manual. The drying time and the energy consumption are both increased by a high ambient temperature and too small a room. Clean the filter after each drying cycle. Clean the condenser twice a month.

39

EN 2 / DESCRIPTION OF YOUR APPLIANCE

Control panel

Condensate container

Condenser grill

Filter

Information plate (Reference for After-Sales)

Adjustable feetF

E

D

C

B

A

GENERAL PRESENTATION OF THE TUMBLE DRYER

Fig. 01

B

A

D

F

C

E

40

EN

Fig. 03

3 / INSTALLING YOUR TUMBLE DRYER

Fig. 02

THE APPLIANCES SURROUNDINGS

Important : We would strongly advise against:

Installing your appliance on a carpeted floor. If you cannot avoid this, take all possible mea- sures not to obstruct the circulation of air at its base. Installing your dryer in a location where it could be subject to being splashed with water. Installing your dryer in a small closed room (if this is the case, open the door or the win- dow during drying) Installing your dryer in a poorly ventilated room. The temperature in the room must remain below 30C during drying.

1 cm mini

Advice : Your tumble dryer releases heat. If you place it next to another appliance or a unit, we would

advise you always to leave a space in-between to assist air circulation (Fig. 02).

Important : Use a spirit level to check that the

appliance is horizontal:

Your dryer is fitted with 4 adjustable feet (Fig.03). To adjust its horizontality and stabi- lity: Tip it slightly backwards Screw one or more of the feet in or out using a spanner or a screwdriver to adjust their height to suit the shape of the floor (Fig.03) Set your dryer back on its feet and check that it is stable.

LEVELLING

41

EN 3 / INSTALLING YOUR TUMBLE DRYER

If you wish to incorporate your appliance as a built-in unit, a special kit is required. Please contact your Consumer Relations Department.

PORTE A DROITE

EF

B CD

A

BUILT-UNDER INSTALLATION

PORTE A GAUCHE

A

B

E F

C D

Important : Check with your local After Sales Service Centre to see whether the column mounting kit

is compatible with your washing machine. For safety reasons, the assembly must be checked by a qualified professional.

COMBINED WASHER/DRYER INSTALLATION

If you wish, you can alter the direction the door opens as follows (Fig. 04 or 05).

Remove the 4 screws in the front panel holding the hinges and .

Reverse the hinge and fasten it back on.

Refit the door on the hinge .

Reverse the hinge and fasten it back on.

Reverse the positions of the lock and the cover on the machines front face.

Reverse the positions of the bolt and the cover .DC

EF

B

A

A

BA

Fig. 04 Fig.05

MODIFYING THE DOOR OPENING DIRECTION

LEFT-HAND DOOR RIGHT-HAND DOOR

42

EN 3 / INSTALLING YOUR TUMBLE DRYER

ELECTRICAL CONNECTION

Danger : For making the electrical connection to your appliance:

Do not use an extension, an adapter, a multiple socket or a programmable timer. The plug must be easily accessible but be out of childrens reach. If in any doubt about the condition of your installation, contact your installer or a qualified Brandt- approved professional. Never eliminate the electrical Earthing system.

The electrical installation must comply with norm NF C15-100, particularly as regards the Earthing system. 3 x 2.5mm 230V line connected to: A 20A, 230V-50Hz meter A differential circuit-breaker and a specific 16A fuse A 16A 2 pin + Earth socket

We cannot be held responsible for any incident caused by poor electrical installation.

Advice : In order to find your appliances reference numbers easily in future, we recommend that

you note them down on the After-Sales Service and Consumer Relations page (this page also explains where to find these on your appliance).

Your appliance complies with European Directives 73/23/EEC (Low Voltage Directive) and 89/336/EEC (Electromagnetic Compatibility) as modified by Directive 93/68/EEC.

43

EN 4 / PREPARING YOUR ITEMS

CHECKING THE CONDITION OF YOUR TEXTILES

Advice : If, before you insert your laundry in the

tumble dryer, you notice any stains, even after washing, do not dry the items concer- ned. As a general rule, stains that have been ironed or tumble-dried can no longer be removed. Please refer to the instructions for treating stubborn stains provided in most washing machine operating instructions manuals and, in particular, wash the stained items again.

Preparing your items : Close all zip fasteners and press studs. Remove any loose buttons, pins or hook fasteners. Knot any belts, apron strings, etc... Empty the pockets.

Normal drying

Gentle drying

Do not tumble dry

Important : Check the labels on your texti-

les

Open the door by pushing it (Fig.06). Check that the filter is in its housing . Insert the washed and spun laundry loosely in the drum without folding it or piling it up. Close the door.

Recommended volumes : To reduce creasing and optimise drying times, we recommend you do not overload the machine.

Important : Do not tumble-dry the following

articles : Plastic-coated fabrics Chlorofibres (Thermolactyl* for example) *Registered trademark Items containing plastic foam, rubber or underwiring that could become detached Bulky items (duvets, eiderdowns, etc...) Laundry that has not been spun Laundry cleaned with inflammable chemi- cals.

INSERTING YOUR ITEMS IN THE DRUM

Fig. 06

44

EN 5 / PROGRAMMING

PRESENTATION OF THE CONTROL PANEL

Programmes knob Start / Pause Anti-creasing Buzzer

Additional drying Delayed start ON / OFFG

F

E

D

C

B

A

Programme progress

Time remaining

Starting the appliance : Check that the power cable is plugged in. The appliance will not start unless the door is properly closed. Press the ON / OFF button Select your programme (see the table Your dryers programmes on the following pages) by turning the programmes knob (it turns in both directions). The indicator light lit shows you the programme you have selected. Press Start/Pause and the programme will start. The display shows you approximately how much time remains on the programme as the drying cycle progresses.

B

G

PROGRAMMING A DRYING CYCLE

Advice : Consult the Programmes table on the next page to determine the one you need for the

type of items.

STOP

SF-84CE

MIX

A B C D E F G

45

5 / PROGRAMMINGEN

Delaying a programmes start : Select your programme using the programme knob . The indicator light lit shows you the programme you have selected. Turn the Delayed Start knob to delay the start of your programme thirty minutes at a time until you reach the delay you wish (max 23 hours). Confirm by pressing the Start/Pause button . The display shows you how much time remains before your programme starts.

Once the time delay has expired and the pro- gramme actually starts, the display shows you approximately how much time remains on the programme as the drying cycle progresses.

Adding or removing an item during drying : Press Start/Pause to interrupt drying and open the door directly. Insert or remove the item or items and close the door. Press the Start/Pause button to resume drying.

Altering programming or drying during operation : Press Start/Pause to interrupt drying. Select another programme. Press the Start/Pause button to resume drying.

Stopping the appliance : At the end of the programme, the Filter and Tank Full lights flash alternately to remind you that you must clean the filter and empty the water collection tank after every drying cycle: Press the ON / OFF button and empty your drier. Clean the filter and empty the water collection tank (for how to do this, see the REGULAR MAINTENANCE section).

G

B

B

B

B

B

F

A Time remaining before the start of the drying cycle

Delayed start

Programme stop

Time remaining

Programme stop

Time remaining

End of programme

The Filter and Tank Full lights flash

46

5 / PROGRAMMINGEN

Additional time

End of programme

The Filter and Tank Full lights flash

End of programme

The Filter and Tank Full lights flash

Programme stop

TheTank Full light illumi- nates.

Additional Drying option : This function enables you to add drying time at the end of a programme in units of 10 minutes by successively pressing the Additional Drying button . Press the Start/Pause button. The additional drying is adapted to suit the textiles for the selected programme.

Buzzer option : Press the Buzzer button , 3 beeps every 10 minutes for one hour until the door is ope- ned or the appliance stops.

Anti-creasing option : Press the Anti-creasing button This option activates as soon as drying is com- plete. It prevents the textiles from settling in a heap. They are agitated every 10 minutes for 24 hours until the door is opened or the appliance stops.

C

D

E

Remarks : The Buzzer and Anti-creasing

options remain selected from one programme to the next. Simply pressing the button enables you to cancel the option, even while a programme is running.

During the cycle : Your tank is full during the drying cycle. The appliance stops during the programme. The Tank Full light is lit, the time remaining flashes. Proceed to empty your water collection tank (for how to do this, see the REGULAR MAIN- TENANCE section). Press Start/Pause [B] to restart your pro- gramme.

STOP

SF-84CE

MIX

A B C D E F G

47

EN 5 / PROGRAMMING

RECOMMENDED PROGRAMMES FOR TESTS TO EN 61121 - DIRECTIVE 95/13/EEC Load I Dry Cotton 8kg ....select Cotton, ready to put away Load II Ready-to-iron Cotton 8kg ....select Cotton, ready to iron Load III Easy Maintenance Textiles 3kg ....select Modern Fibres

Advice : As a safety measure, you are advised to unplug the power cable when you are not using

the appliance.

Important : A power failure cancels the current programme. In this case, therefore, you have to

repeat all the programming operations.

Regular programmes Type of textile Drying results

ALL TEXTILES (MIX)

Ready to put away Regular textiles Dry

Ready to iron Regular textiles Slightly damp

COTTON

Extra drying Cotton Drier

Ready to put away Cotton Dry

Ready to iron Cotton Slightly damp

Machine pressing Cotton Damp

Other drying programmes

Shirts Synthetic, easy iron

Dry

Modern fibres Delicate, synthetic Dry

Delicates Very delicate: silk, light

synthetic lingerie ... Dry

Refreshing and airing your textiles after prolonged storage

Air woollens Woollens already dry 6 minutes

Air and refresh Other textiles 15 minutes

YOUR DRIERS PROGRAMMES

48

EN 6 / REGULAR MAINTENANCE

Important : We would remind you that the filter

must be cleaned after every cycle. This is located in the lower part of your dryer. Clean it as follows: Remove it from its housing by pulling it from the bottom upwards (Fig. 07) Open the filter (Fig. 08) Clean it by removing the thin coating of fluff covering it (Fig. 09)

Ensure that there is no fluff accumulating round the dryer.

Important : IThe filter must not be washed with

water (Fig. 10). Re-insert it in its housing, pushing it well in.

CLEANING THE FILTER

Fig. 07

Fig. 08

Fig. 09

Fig. 10

This is located at the top of your appliance. It collects the water extracted from your items as they are dried. To empty it, free it from its housing by pul- ling it towards you (Fig. 11).

Important : The collection tank must be emptied

after each drying cycle (Fig.12).

Important : Risk of frost: if there is a risk of frost,

empty the water collection tank.

Important : Moving the appliance: empty the water

collection tank if you wish to move or tilt your appliance. Empty the tank (Fig. 12).

EMPTYING THE COLLECTION TANK

Fig. 11

Fig. 12

49

CONNECTING THE WATER OUTLET DIRECTLY TO THE DRAIN

To avoid having to empty the collection tank every time you use the appliance, you have a kit for eva- cuating the water from the condenser directly into the drain (hose and plastic tab); to fit this:

Take off the existing pipe and push it inside the appliance (Fig. 13).

Glue on the plastic cover to close off access to the inside of the appliance. (Fig. 14)

Connect the hose from the kit to the end connector on the appliance (Fig. 15).

You can connect the other end of the hose either : - To a ventilated trap (Fig. 16 ).

- Or a sink trap (Fig. 16 ).

When connecting to a trap, you must remove the fil- ler plug. Then press home the rubber tip. If neces- sary, add a clamp connection (Fig. 16 ).

Important : The plastic tab must necessarily be positio-

ned before the drain hose connection to avoid any water splashes when taking off the hose.

B

B

A

Fig. 15

Fig. 16

Fig. 13

Fig. 14

B

A

EN 6 / REGULAR MAINTENANCE

50

EN

50

6 / REGULAR MAINTENANCE

To keep your appliance in good working order, we recommend that you use Clearit household products.

Professional expertise for the general public Clearit offers you professional products and adapted solutions for the daily upkeep of your house- hold and kitchen appliances. You may find them in conventional retail outlets, along with a complete line of by-products and consumables.

Fig. 20

Advice : To clean the control panel, the access to the

drum and the casing, use only a sponge or a damp cloth and some soapy water. Ensure that there is no fluff accumulating round the dryer. Clean the door seal with a damp cloth. Clean the filter housing with your vacuum cleaner once per year. You should not use, under any circumstances (Fig.20): Abrasive powders Metal or plastic sponges Alcohol-based products (alcohol, thinners, etc.)

CLEANING THE APPLIANCE

Important : The condenser must be cleaned twice a

month. Important : Unplug the power cable from the socket

before cleaning the condenser. Drop down the grill at the front of the appliance. Release the condenser (Fig.17). Remove it carefully (Fig.18). Remove any fluff from the condenser. Clean it just with water under the tap (Fig.19). After cleaning, ensure that none of the tubes are blocked and that the fins are clean. Rub it over superficially. Re-insert the condenser and lock it in place. Refasten the grill.

Important : When refitting the condenser, keep it pus-

hed in firmly right to the back of its housing when locking it in.

CLEANING THE CONDENSER

Fig. 17

Fig. 18

Fig. 19

51

EN 7 / TROUBLESHOOTING

Advice : Some incidents may arise when you are using your dryer. Here are the points you should

check.

Fault : Check whether : The dryer does not start : - The plug is in the socket

- The ON/OFF button is pressed in - The door is properly closed - The condenser is correctly locked in place.

The drying times are too long : - The filter in the drum is clogged with fluff - The laundry has been spun enough beforehand

(500rpm minimum, but spinning at 850rpm provides better drying times)

- The condenser is not clogged. - The air inlets and outlets are unobstructed enough to ensure correct air circulation. - The drying programme selected matches the type of

items in the drum.

The laundry is too damp : - The filter in the drum is clogged with fluff - The type of drying has been selected correctly (too

low) : switch to the next programme up or increase the drying time.

- The condenser is not blocked by fluff.

The laundry is too dry, too creased : - The drying time selected is too long: the drying time is better to be too short than too long: this avoids the laundry becoming too dry and difficult to iron.

The items are unevenly dried : - The types of textiles in the load are too different (e.g. sheets together with jeans)

- The laundry has been laid correctly unfolded in the dryer

The drum is not overloaded.

The synthetic items are loaded with static electricity :

- The laundry has been dried too much - You have used softener during washing. By using this

product, you can reduce most of the problems with static electricity.

The Tank Full indicator light is lit : - The condensate container is full: once you have emp- tied it, re-insert it correctly, pushing it fully into its housing

The Tank Full indicator light illumina- tes although the tank is empty :

- Check whether the container has been properly inser- ted: push it in fully.

- Check if the condenser is tightly locked on the two sides.

EN 8 / AFTER-SALES SERVICE

Any work on your appliance must be perfor- med by a Brandt-approved qualified professio- nal. When you call, mention your appliances full reference (model, type, serial number). These details are shown on the manufacturers information plate (Fig. 21).

ORIGINAL PARTS During any maintenance work, ask that only certified original replacement parts be used.

INTERVENTIONS

Fig. 21

CHANGING THE BULB (depending on the model)

You can change the bulb (type E14-15W/230V) your- self (Fig

Manualsnet FAQs

If you want to find out how the EFE730F Brandt works, you can view and download the Brandt EFE730F Dryer User Manual on the Manualsnet website.

Yes, we have the User Manual for Brandt EFE730F as well as other Brandt manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Brandt EFE730F. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brandt EFE730F Dryer User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brandt EFE730F Dryer User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brandt EFE730F Dryer User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brandt EFE730F Dryer User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Brandt EFE730F Dryer User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.