Brandt 1SF-72CE Dryer User Manual PDF

1 of 19
1 of 19

Summary of Content for Brandt 1SF-72CE Dryer User Manual PDF

38

CONTENTSEN

1 / FOR THE USERS ATTENTION

Safety instructions ______________________________________ 39

Protection of the environment ____________________________ 40

2 / DESCRIPTION OF YOUR APPLIANCE

General presentation of the tumble dryer ____________________ 41

3 / INSTALLING YOUR TUMBLE DRYER

The appliances surroundings ____________________________ 42

Levelling ______________________________________________ 42

Built-in installation ______________________________________ 43

Combined washer/dryer installation ________________________ 43

Modifying the door opening direction ______________________ 43

Electrical connection ____________________________________ 44

4 / PREPARING YOUR ITEMS

Checking the condition of your textiles______________________ 45

Inserting the items in the drum ____________________________ 45

5 / PROGRAMMING

Presentation of the control panel __________________________ 46

Programming a drying cycle ______________________________ 46

Your dryers programs __________________________________ 49

6 / REGULAR MAINTENANCE

Cleaning the filter ______________________________________ 50

Emptying the condensation container ______________________ 50

Direct evacuation of water condenser ______________________ 51

Cleaning the condenser __________________________________ 52

Cleaning the appliance __________________________________ 52

7 / TROUBLESHOOTING ______________________________________ 53

8 / AFTER-SALES SERVICE ____________________________________ 54

39

1 / FOR THE USERS ATTENTIONEN

Warning : Please read the user guide carefully before turning on your appliance so that you can

learn how to use it as quickly as possible.

Important : Keep these operating instructions with

your appliance. If you should sell your machine or give it to someone else, ensure that the operating instructions are provided. Please take note of these safety instructions before installing and using your appliance. They have been written for your safety and that of others.

SAFETY INSTRUCTIONS Installation When you receive the appliance, unpack it or have it unpacked immediately. Check that it has not suffered any damage during trans- port. Express any reservations in writing on the delivery slip and keep a copy. Never connect a damaged appliance. If your appliance is damaged, please contact your dealer. Before connecting your appliance, please refer to the installation instructions. Your tumble dryer must be kept disconnec- ted from the mains supply throughout the whole installation process. The electrical connection details shown on your appliances information plate must match those of the local mains supply. Once your appliance has been installed, the electrical plug must remain accessible. Do not alter or try to alter the appliances characteristics. This could be dangerous. If your installation requires alteration, only entrust the electrical and plumbing work to qualified electricians and plumbers. The appliance must not be installed behind a locking door, a sliding door or a door with hin- ges on the opposite side to those on the dryer. Your appliance is designed for normal domestic use. Do not use it for commercial or industrial purposes or for any purpose other than the one for which it has been designed

Childrens safety This appliance must only be used by adults. Do not let children play with the appliance and keep pets away from it. Keep young children away from the appliance when it is operating. Keep the packaging materials out of chil- drens reach (e.g.: plastic bags, polystyrene, etc.) because they can be dangerous for chil- dren : risk of suffocation. This appliance is not intended for use by per- sons (including children) with reduced physi- cal, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or instructed concerning use of the appliance by the person responsible for their safety.

Use Important : Your tumble dryer is designed for

domestic use only, for drying textiles suitable for tumble drying.

Important : You must observe the following instruc-

tions. We decline any responsibility and res- cind the guarantee if these recommendations are ignored : failure to observe them can result in material damage and physical injury.

Use your appliance in accordance with its method of use, thereby avoiding injury to your- self and damage to your items. Do not use sol- vents in the appliance (risk of fire and explo- sion). Strictly comply with the care instructions on your laundry. If you have to open the door of the drum during the drying cycle, ensure that you do not touch the drum immediately, as it is very hot.

40

1 / FOR THE USERS ATTENTIONEN

Substances contained in soiling such as oil, acetone, alcohol, petrol, kerosene, stain removers, turpentine or wax must be removed before drying in your machine (by using an adapted warm water washing programme with additional detergent for example). Precautions for using stain-removing products : any preliminary treatment by solvent, stain-remo- ver, aerosol, such as acetone, alcohol, gasoline, kerosene, trbentine is prohibited because these products are very inflammable. If your laundry requires this type of treatment, this must be done before washing. Similarly, we recommend that you do not use these products near to your dryer or, in general, near any electrical appliance in a poorly ventilated room in order to avoid any risk of an explosion. If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see TROUBLESHOOTING), contact our Technical Service Center. Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power cable flush with the appliance and make the door lock inoperable. For your safetys sake, if you wish to change your appliances power cable, contact a qualified electrician. If any operating anomalies occur, disconnect your appliance and call our Technical Service Center.

ENVIRONMENTAL PROTECTION The appliances packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate that in countries that are a members of the European Union the used appliances should not be mixed with other waste. This way, the appliance recycling orga- nised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment.

Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you for doing your part to protect the environment.

ENERGY SAVINGS Spin your textiles at high speeds ; the residual dampness will be low, as will your energy consumption. Even synthetic textiles must be spun before drying. Place the maximum load in your machine ; this will optimize the energy used. When doing so, comply with the indications on volume provided in this instruction manual. The drying time and the energy consumption are both increased by a high ambient temperature and too small a room. Clean the filter after each drying cycle. Clean the condenser twice a month. Swich off your tumble dryer at the cycle ends.

41

2 / DESCRIPTION OF YOUR APPLIANCEEN

GENERAL PRESENTATION OF THE TUMBLE DRYER

Fig. 01

B

A

D

F

C

E

Control panel

Condensate container

Condenser grill

Filter

Information plate (Reference for After-Sales)

Adjustable feetF

E

D

C

B

A

42

3 / INSTALLING YOUR TUMBLE DRYEREN

Fig. 03

Fig. 02

THE APPLIANCES SURROUNDINGS

Important : We strongly advise against :

Installing your appliance on a carpeted floor. If you cannot avoid this, take all possible mea- sures not to obstruct the circulation of air at its base. Installing your dryer in a location where it can be subject to being splashed with water. Installing your dryer in a small closed room (if this is the case, open the door or the win- dow during drying). Installing your dryer in a poorly ventilated room. The temperature in the room must remain below 30C during drying.

1 cm mini

Advice : Your tumble dryer releases heat. If you place it next to another appliance or a unit, we

advise you always to leave a space in-between to assist in air circulation (Fig. 02).

Important : Use a level to check that the appliance

is horizontal :

Your dryer is fitted with 4 adjustable feet (Fig.03). To adjust the stability and levelness : Tip it slightly backwards. Screw one or more of the feet in or out using a spanner or a screwdriver to adjust their height to suit the shape of the floor (Fig.03). Set your dryer back on its feet and check that it is stable.

LEVELLING

0.4 inches minimum

43

3 / INSTALLING YOUR TUMBLE DRYEREN

BUILT-IN INSTALLATION

An adaptation kit is available from your dealer. This is used to mount your tumble dryer above your washing machine.

MODIFYING THE DOOR OPENING DIRECTION

Important : Check with your dealer that the kit is compatible with your washing machine. For safety rea-

sons, fitting must be performed by a qualified professional.

Important : If you are fitting the appliance underneath a worktop, you must either keep the original

laminated top, or replace it with a slimmer version using a kit available for this purpose from your dealer. For safety reasons, the appliance must never be operated without a top.

COMBINED WASHER/DRYER INSTALLATION

If you wish, you can alter the direction the door opens as follows (Fig. 04 or 05).

Remove the 4 screws in the front panel holding the hinges and .

Reverse the hinge and fasten it back on.

Refit the door on the hinge .

Reverse the hinge and fasten it back on.

Reverse the positions of the lock and the cover on the machines front.

Reverse the positions of the bolt .C

EF

B

A

A

BA

EF

B

C

A

A

B

E F

C

Fig. 04 Fig. 05Left-hand Door Right-hand door

44

3 / INSTALLING YOUR TUMBLE DRYEREN

ELECTRICAL CONNECTION

Danger : To make the electrical connection to your appliance :

Do not use an extension, an adapter, a multiple socket or a programmable timer. The plug must be easily accessible but be out of childrens reach. If there's any doubt about the condition of your installation, contact your installer or a qualified Brandt-approved professional. Never eliminate the electrical Earthing system.

The electrical installation must comply with the prevailing standards and the Electricity Boards regulations in the country concerned, particularly regarding Earthing and installation in shower rooms.

We cannot be held responsible for any incident caused by poor electrical installation.

Advice : In order to easily find your appliances reference numbers in the future, we recommend

that you note them down on the After-Sales Service and Consumer Relations page (this page also explains where to find these on your appliance).

Your appliance complies with European Directives 2006/95/EEC (Low Voltage Directive) and 2004/108/EEC (Electromagnetic Compatibility).

REPLACING THE ELECTRIC POWER CABLE

Important : To ensure your safety, this must be carried out by the manufacturer's after-sales service

team or a qualified professional.

45

4 / PREPARING YOUR ITEMSEN

CHECKING THE CONDITION OF YOUR TEXTILES

Open the door by pushing (press where the label is) (Fig. 06). Check that the filter is in its housing . Insert washed and spun clothes loosely in the drum without folding it or piling it up. Take care not to let any fabrics get caught in the door. Close the door.

Recommended volumes : The maximum capacity of the dryer is 7 kg. To reduce creasing and optimise drying times, we recommend you do not overload the machine.

INSERTING YOUR ITEMS IN THE DRUM

Fig. 06

Advice : If, before you insert your clothes in the

tumble dryer, you notice any stains, even after washing, do not dry the items concer- ned. As a general rule, stains that have been ironed or tumble-dried can no longer be removed. Please refer to the instructions for treating stubborn stains provided in most washing machine instruction manuals and, in particu- lar, wash the stained items again.

Preparing your items : Close all zippers and snap buttons. Remove any loose buttons, pins or hook fas- teners. Knot any belts, apron strings, etc... Empty pockets.

Always adhere to the manufacturer's ins- tructions when using softening products.

Important : Do not tumble-dry the following

articles : Clothing including rubber like materials (for example: shower caps, waterproof clothing and textiles, linings, pillows etc.) Chlorofibres (Thermolactyl* for example) *Registered trademark Items containing underwiring that could become detached Bulky items (duvets, eiderdowns, etc...) Laundry that has not been spun Laundry cleaned with inflammable chemi- cals.

Important : Check the labels on your textiles

Normal drying

Gentle drying

Do not tumble dry

46

5 / PROGRAMMINGEN

PRESENTATION OF THE CONTROL PANEL

PROGRAMMING A DRYING CYCLE

Starting the appliance : Check that the power cable is plugged in. The appliance will not start unless the door is pro- perly closed. Press the On/Off button . Select your program (see the table Your dryers programs on the following pages) by turning the programs dial (it turns in both directions). The indicator light shows you the program you have selected. Press Start/Pause and the pro- gram will start. The program progress lights illuminate suc- cessively as the drying progresses.

MEMO ACTIV function : Your dryer remembers the programs that you use most often. After a few drying cycles, the program dis- played when you switch on your machine is the one that you have used most often.

E

A

F

Pause - Drying - Cooling down - End of program

Program progress :

1SF-72CE

A B C D E F

Programs dial Anti-creasing Delayed start

Buzzer Start/Pause On/OffF

E

D

C

B

A

Advice : Consult the Programs table on the next page to determine the program needed for the

type of items.

47

5 / PROGRAMMINGEN

Delaying a programs start : Select your program using the program knob

. The indicator light lit shows you the pro- gram you have selected. Press the Delayed Start knob to delay the start of your program by 3 h , 6 h, 9 h or 12 hours. Confirm by pressing the Start/Pause button

. During the delayed start phase, the indicator changes from 12:00 to 9:00, from 9:00 to 6:00 or from 6:00 to 3:00. Once the Delayed Start time delay has expired, the program actually starts. The program progress lights illuminate as the drying cycle progresses.

Adding or removing an item during drying : Press Start/Pause to interrupt drying or open the door. Insert or remove the item or items and close the door. Press the Start/Pause button to resume drying.

Altering programming or drying during operation : If you have entered the wrong program, you can change your selection during the cycle. Press Start/Pause to interrupt drying. Select another program using the program dial. Press the Start/Pause button to resume drying.

Stopping the appliance : At the end of the program, the Filter and Tank Full lights flash alternately to remind you that you must clean the filter and empty the water collection tank after every drying cycle: Press the On/Offbutton and empty your dryer. Clean the filter and empty the water collection tank (see the REGULAR MAINTENANCE section).

F

E

E

E

E

E

C

A

Delayed start

Program stop

End of program

48

5 / PROGRAMMINGEN

Remarks : The Anti-creasing and "Buzzer" options remains selected from one program to the next. You

can simply press the button to deactivate thes options, even during a program.

Important : A power failure cancels the current program. In this case, therefore, you have to reset all

the programming operations.

Anti-creasing option : The Anti-creasing option fluffs the textiles every 10 minutes for up to 24 hours, until the door is opened or the machine is turned off. It begins as soon as the drying finishes and pre- vents the clothes from settling in the machine. To select this function, press the Anti-crea- sing . An indicator lights up to show that this option has been activated.

Buzzer option : Press the Buzzer button . At the end of drying, three beeps will sound every 10 minutes for one hour until the door is opened or the appliance is stopped.

Cooling cycle : All programs finish with a cooling cycle that lasts for a few minutes to allow the washing to cool gradually.

Important : Do not stop your dryer before this

cycle has finished.

During the cycle : Your tank is full during the drying cycle. The appliance stops during the program. The Tank Full and Pause light is lit, and the program light flashes. Proceed to empty your water collection tank (see the REGULAR MAINTENANCE sec- tion). Press Start/Pause to restart your program.

E

D

B

Anti-creasing option

Buzzer option

Program stop

49

EN 5 / PROGRAMMING

YOUR DRYERS PROGRAMS

Regular programs Type of textile Drying results

COTTON -

Extra drying - Cotton Dry

Ready to put away - Cotton Dry

Ready to iron - Cotton Slightly damp

Machine pressing - Cotton Damp

ALL TEXTILES -

Ready to put away - Regular textiles Dry

Ready to iron - Regular textiles Slightly damp

Other drying programs

Schirts - Synthetic, easy iron Dry

Modern fibres - Delicate, synthetic Dry

Delicates - Very delicate: silk, light

synthetic lingerie ... Dry

Refreshing and airing your textiles after prolonged storage

Air and refresh - Other textiles 15 minutes

Additional drying

30 min. ou 60 min. Regular textiles

Advice : As a safety measure, you are advised to unplug the power cable when you are not using

the appliance.

RECOMMENDED PROGRAMS FOR TESTS TO EN 61121 - DIRECTIVE 95/13/EEC

Load I Dry Cotton 7kg .... select Cotton - ready to put away Load II Ready-to-iron Cotton 7kg .... select Cotton - ready to iron Load III Easy Maintenance Textiles 3kg .... select Modern Fibres

50

EN 6 / REGULAR MAINTENANCE

Important : Please remember that the filter must

be cleaned after every drying.

This is located in the lower part of your dryer. Clean it as follows: Remove it from its housing by pulling it upwards (Fig. 08) Open the filter (Fig. 09) Clean it by removing the thin coating of fluff covering it (Fig. 10)

Ensure that there is no fluff accumulating round the dryer.

Important : Do not wash filter with water Fig. 11).

Re-insert it in its housing, pushing it well in.

CLEANING THE FILTER

Fig. 08

Fig. 09

Fig. 10

Fig. 11 EMPTYING THE CONDENSATION

CONTAINER

Fig. 12

Fig. 13

This is located at the top of your appliance. It collects the water extracted from your items as they are dried. To empty it, release it from its housing by pulling it towards you (Fig. 12).

Important : The condensation container must be

emptied after each drying cycle (Fig.13).

Important : Risk of frost : if there is a risk of frost,

empty the condensation container.

Important : Moving the appliance : empty the

condensation container if you wish to move or tilt your appliance. Empty the container (Fig. 13).

51

EN 6 / REGULAR MAINTENANCE

DIRECT EVACUATION OF WATER CONDENSER

90 c

m m

ax i

Fig. 16

Fig. 14

Fig. 15

Fig. 18

Fig. 17

To avoid having to empty the collection tank every time you use the appliance, you have a kit (*) for removing the water from the condenser directly into the drain (hose and deflector). To fit this : Take off the existing pipe and push it inside the appliance (Fig. 14). Clip the deflector with the top of the pump (Fig. 15). Connect the hose from the kit to the end connector on the appliance (Fig. 16).

You can connect the other end of the hose either : - To a ventilated trap (Fig. 17). - Or a sink trap (Fig. 18).

When connecting to a trap, you must remove the fil- ler plug. Then press home the rubber tip. If neces- sary, add a clamp connection (Fig. 18).

Important : The deflector must necessarily be positioned

before the drain hose connection to avoid any water splashes when taking off the hose.

Dflecteur Encart

Tuyau

Remarks : (*) This kit is provided with the appliance

(according to model).

eflector

Hose

Insert

52

EN 6 / REGULAR MAINTENANCE

Fig. 22

CLEANING THE CONDENSER

Fig. 19

Fig. 20

Fig. 21

Important : The condenser must be cleaned twice

a month.

Important : Unplug the power cable from the

socket before cleaning the condenser.

Open the grill at the front of the appliance. Release the condenser (Fig.19). Remove it carefully (Fig.20). Remove any fluff from the condenser. Clean it with water only under the tap (Fig.21). After cleaning, ensure that none of the tubes are blocked and that the fins are clean. Rub it superficially. Re-insert the condenser and lock it in place. Close the grill.

Important : When refitting the condenser, ensure

that it is pushed in firmly right to the back of its housing when locking it in.

Advice : To clean the control panel, the access

to the drum and the casing, use only a sponge or a damp cloth and some soapy water.

Ensure that there is no fluff accumulating round the dryer. Clean the door seal with a damp cloth. Clean the filter housing with your vacuum cleaner once a year.

You should not use, under any circumstances (Fig 22) : Abrasive powders Metal or plastic sponges Alcohol-based products (alcohol, thinners, etc.)

CLEANING THE APPLIANCE

53

EN 7 / TROUBLESHOOTING

Advice : Some incidents may arise when you are using your dryer. Here are the points you should

check.

Fault : Check whether : The dryer does not start : - the plug is in the socket

- the On/Off button is pressed in - the door is properly closed - the condenser is correctly locked in place.

The drying times are too long : - the filter in the drum is clogged with fluff - the laundry has been spun enough beforehand

(500rpm minimum, but spinning at 850rpm provides better drying times)

- the condenser is not clogged. - the air inlets and outlets are unobstructed enough to

ensure correct air circulation. - the drying programme selected matches the type of

items in the drum.

The laundry is too damp : - the filter in the drum is clogged with fluff - the type of drying has been selected correctly (too

low) : switch to the next programme up or increase the drying time.

- the condenser is not blocked by fluff.

The laundry is too dry, too creased : - the drying time selected is too long: the drying time is better to be too short than too long: this avoids the laundry becoming too dry and difficult to iron.

The items are unevenly dried : - the types of textiles in the load are too different (e.g. sheets together with jeans)

- the laundry has been laid correctly unfolded in the dryer

- the drum is not overloaded.

The synthetic items are loaded with static electricity :

- the laundry has been dried too much - you have used softener during washing. By using this

product, you can reduce most of the problems with static electricity.

The Tank Full indicator light is lit : - the condensate container is full: once you have emp- tied it, re-insert it correctly, pushing it completely into its housing

The Tank Full indicator light illumi- nates although the tank is empty :

- the container has been properly inserted: push it in completely.

- the condenser is tightly locked on the two sides.

54

EN 8 / AFTER-SALES SERVICE

Fig. 23

Any work on your appliance must be perfor- med by a Brandt-approved qualified professio- nal. When you call, mention your appliances full reference (model, type, serial number). These details are shown on the manufacturers information plate (Fig. 23).

ORIGINAL PARTS During any maintenance work, ask that only certified original replacement parts be

Manualsnet FAQs

If you want to find out how the 1SF-72CE Brandt works, you can view and download the Brandt 1SF-72CE Dryer User Manual on the Manualsnet website.

Yes, we have the User Manual for Brandt 1SF-72CE as well as other Brandt manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Brandt 1SF-72CE. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Brandt 1SF-72CE Dryer User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Brandt 1SF-72CE Dryer User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Brandt 1SF-72CE Dryer User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Brandt 1SF-72CE Dryer User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Brandt 1SF-72CE Dryer User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.