Contents

Bowers Wilkins T7 Wireless v2 Owner’s Manual PDF

1 of 98
1 of 98

Summary of Content for Bowers Wilkins T7 Wireless v2 Owner’s Manual PDF

T7

Firmware version 1.00 Operation may differ from other firmware versions

2

E N

G L

IS H

www.bowers-wilkins.com

Welcome to Bowers & Wilkins and T7 Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design.

T7 can be used to: Play music streamed from your mobile phone, tablet or

computer using Bluetooth wireless technology. Play music using a wired connection from any device

incorporating an analogue audio output . T7 is powered by a lithium-ion rechargeable battery pack, able when fully charged, to provide up to 18 hours playback time at average volume levels.

This manual will tell you everything you need to know to get the most from T7. It begins by describing the contents of T7 carton.

Note: Before using T7 ensure you have read and understood the safety instructions included with the product.

ENGLISH

Contents

ENGLISH 2 1. T7 Carton Contents 3

2. Getting to know T7 3

3. Battery charging 4

4. Switching on and off 4

5. T7 audio inputs 5

5.1 Bluetooth connection 5

5.2 Wired connection 6

6. Operating T7 6

7. T7 Indicators and Audio cues 6

8. T7 Firmware Update 6

9. Reboot 6

10. Cleaning T7 6

11. Troubleshooting 6

Technical Specifications 7

3

E N

G L

IS H

1. T7 Carton Contents

T7 speaker. T7 power supply. Regional plugs adapters. Literature pack

Environmental Information This product complies with international directives, including but not limited to the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment, the Registration, Evaluation, Authorisation and restriction of Chemicals (REACH) and the disposal of Waste Electrical and Electronic Equipment (WEEE). Consult your local waste disposal authority for guidance on how properly to recycle or dispose of this product.

Note: T7 is not waterproof and is not intended for use in high humidity environments such as bathrooms, swimming pools and saunas.

2. Getting to know T7

T7 is a Hi-Fi speaker built with maxiumum portability in mind. Once switched on via the Power button on its right hand side, it is controlled via Bluetooth, Play/Pause, Volume + and Volume buttons on its top panel. A blue indicator adjacent to the Bluetooth button displays Bluetooth connection state and a column of white indicators above the Power button displays battery charge level. T7 also provides audible feedback for some control commands and events.

Connections on the back of T7 include a power supply input, auxiliary input (3.5mm stereo jack), and service port used for firmware updates only (micro- USB). A pin-hole Reboot button is also located on the back of T7.

Diagram 1 Buttons and connection sockets.

Bluetooth pairing Play/Pause Volume down Volume up

On / Off / Check Battery Auxiliary Service (Firmware update only)

RebootPower

4

E N

G L

IS H

Diagram 4 Battery life indicator

3. Battery charging

T7 will be partially charged when you first unpack it. To charge T7 follow the steps described below.

Select the appropriate regional plug adapter for the mains outlet socket in your territory and clip it to the power supply body as illustrated in Diagram 2.

Plug the T7 power supply into a mains outlet socket and connect its output cable to T7 power input socket. This is illustrated in Diagram 3. If the mains outlet socket incorporates an isolator, switch it on.

Once T7 is connected to power, its battery will begin to charge. A full charge from a fully discharged state will take approximately 4 hours. It is best initially to leave T7 connected until it is fully charged although it can be used while it is charging.

When the Power button is briefly pressed and released the column of five indicators on the right- hand side of T7 will illuminate for short period to indicate the state of battery charge. The indicator illumination depends on the level of charge as shown in diagram 4.

Note: You can charge T7 at anytime independent of battery level.

4. Switching on and off

To switch T7 on or off press and hold the Power button for 2 seconds. T7 will provide audible feedback as it switches on.

Note: If T7 is unused for more than 10 minutes it will automatically enter sleep mode. Wake T7 by starting a Bluetooth audio stream from a paired device. T7 will also wake from sleep mode if either the Bluetooth or power button is pressed. If T7 is unused for more than 20 minutes it will switch off automatically.

If T7 has not been previously used or it is not within range of previously connected Bluetooth devices when first switched on, only its auxiliary input will be operational. See the following section of this manual for information on connecting to Bluetooth devices.

Diagram 3 Connecting T7 into the mains outlet

Diagram 2 Selecting the appropriate adapter

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

5

E N

G L

IS H

Diagram 5 Bluetooth setup

5. T7 audio inputs

T7 can play audio either wirelessly from a compatible Bluetooth device or through a wired connection from a device with an analogue output.

T7 will select between its Bluetooth and wired inputs automatically although the Bluetooth input has priority. The following input selection rules apply:

If T7 is connected via Bluetooth and a plug is inserted in the Auxiliary input socket, T7 will switch to the Auxiliary input.

If T7 is playing audio through its Auxiliary input and a Bluetooth stream is received or the Bluetooth button is pressed, T7 will switch to the Bluetooth input.

If T7 is playing audio through its Auxiliary input and the cable is disconnected T7 will switch to the Bluetooth input and attempt to connect to the primary paired source device.

Note: If T7 is connected via Bluetooth while an Auxiliary input cable is also connected, a new analogue audio signal will not automatically switch T7 to its Auxiliary input.

5.1 Bluetooth connection

To connect T7 to a Bluetooth enabled audio device it must first be paired with the device. Once paired, a Bluetooth device and T7 will remember each other and be able to connect when within range.

T7 will remember up to eight paired Bluetooth devices. The first paired device will be designated as the primary device, additional devices will be designated as secondary devices.

The primary device will be connected when within range, and the T7 Bluetooth button is pressed. Secondary devices will not connect automatically when in range but must be connected via their Bluetooth settings.

It is possible for two paired devices to be connected to T7. However, audio will only be heard from one device at any one time. When two devices are connected the other device can override the active stream.

To pair a Bluetooth device with T7 follow the steps described below.

With T7 switched on, press and hold the Bluetooth button for 2 seconds. The indicator will flash and T7 will provide audible feedback when it enters pairing mode.

Note: T7 will automatically exit from Bluetooth pairing mode if no device is paired within 5 minutes.

Open the Bluetooth settings on the source device and ensure Bluetooth is switched on. Once discovered, Bowers & Wilkins T7 will appear as an available Bluetooth device. Select T7 and close the Bluetooth settings. T7 Bluetooth indicator will flash as pairing is underway and illuminate fully when pairing is established. T7 will also provide audible feedback when pairing is established.

Note: If your Bluetooth audio source device does not support simple pairing and requests a four digit code, enter 0000.

Once a connection has been established, ensure that T7 is selected as the speaker output. Audio will now be heard through T7.

2 seconds

Devices Bowers & Wilkins T7

6

E N

G L

IS H

The paired device memory can be cleared by press and hold Volume and Bluetooth button for 2 seconds. The Bluetooth indicator will flash and T7 will restart once the memory has been cleared.

To disconnect a Bluetooth source device from T7 press the T7 Bluetooth button twice in quick succession. This will disconnect all Bluetooth connected devices. T7 will provide audible feedback when Bluetooth is disconnected.

5.2 Wired connection

Connect to the Auxiliary input using an appropriate cable. T7 will select its Auxiliary input automatically when a plug is inserted. If the analogue audio source has an output volume control, set it initially to around half volume. Use the T7 buttons to control volume rather than the source device volume controls. Only increase the source volume if T7 maximum volume is inadequate.

Note: T7 will always switch automatically to its Bluetooth input if an audio stream is received from a connected Bluetooth source device.

6. Operating T7

Once paired with a Bluetooth source or connected to a wired analogue audio source, operation of T7 is simple.

To increase or decrease volume press the Volume + or Volume buttons respectively.

To play or pause Bluetooth streamed audio use the T7 Play/Pause button. To skip to the next track press the Play/Pause button twice in quick succession. To skip to the previous track press the Play/Pause button three times in quick succession.

Note: The play/pause button will not control audio from T7 Auxiliary input.

To connect to the primary Bluetooth source press the Bluetooth button.

To disconnect from the currently connected Bluetooth source press the Bluetooth button twice in quick succession. If two Bluetooth devices are connected to T7, both devices will be disconnected. T7 will provide audible feedback of Bluetooth disconnection and switch to the auxiliary input.

To select T7 analogue wired input insert a connection plug or disconnect from the connected Bluetooth source.

To check T7 battery charge press the Power button.

To switch T7 off press and hold the Power button.

7. T7 Indicators and Audio cues

Blue flashing T7 is in discoverable mode

Blue solid T7 is successfully paired with a Bluetooth device

Blue blinking (fast flashing)

Pairing has failed

The LEDs on the side of the product give an indication of battery life as described in Diagram 4. Audio cues are heard for the following actions

Power on Power off Bluetooth discoverable mode entered Bluetooth device connected Bluetooth devices disconnected Battery charging initiated Battery charge low Battery charge critical

Note: It is possible to toggle the audio cues on and off by press and releasing Play/Pause and +.

8. T7 Firmware Update

Updated T7 firmware may from time to time be made available for download from the T7 support section of the Bowers & Wilkins website.

9. Reboot

To perform a reboot use a straightened paper-clip to press and hold the Reboot button for two seconds. T7 will turn off, press Power on and reboot will be complete.

Note: Performing a reboot will not clear the paired device memory.

10. Cleaning T7

Wipe surfaces with a dry clean lint-free cloth.

11. Troubleshooting

If you need help troubleshooting a specific problem, or have a question youd like answered, please consult the T7 support section of the Bowers & Wilkins website: www.bowers-wilkins.com

7

E N

G L

IS H

Technical Specifications

Model T7

Description Wireless Portable Speaker

Technical features Bluetooth

Digital Signal Processing (DSP)

High Quality Class D amplifiers

Rechargeable lithium ion battery

Drive units 2x 50mm (2.0 in) Full range

2 x Auxiliary Bass Radiators (ABR)

Frequency response 58Hz - 19kHz +/-3dB

Frequency range -6dB@ 50Hz to 21kHz

Amplifier power output 2 x 12W

Power supply voltage Input: 100-240Vac, 50/60Hz, 1.0A, (Power supply)

Output: 15Vdc, 2.0A

Power consumption Standby: 0.141W

Sleep: 0.317W

Operating temperature This product is only designed to work at an ambient

temperature of up to 45C

Inputs Auxiliary - analogue (stereo 3.5mm jack)

Service - firmware updates only (micro USB)

Height 114mm

Width 210mm

Depth 54mm

Net weight 940g

Enclosure Polycarbonate

Version du logiciel interne 1.00 Les fonctionnalits peuvent tre diffrentes selon les versions du logiciel interne.

8

F R

A N

A

IS

www.bowers-wilkins.com

Bienvenue Bowers & Wilkins et T7 Merci d'avoir choisi Bowers & Wilkins. Lorsque John Bowers a cr notre socit, il la fait avec la conviction quune conception imaginative, une ingnierie de pointe et des technologies novatrices taient les cls qui dbloqueraient les plaisirs de l'audio domicile. Cette vision reste toujours celle que nous partageons et qui inspire tous les produits que nous concevons aujourdhui.

T7 vous permet : Dcouter la musique stocke sur votre tlphone mobile,

tablette ou ordinateur en utilisant la technologie sans fil Bluetooth.

Dcouter de la musique en utilisant une liaison filaire depuis n'importe quel appareil quip dune sortie audio analogique.

T7 est aliment par une batterie lithium-on rechargeable qui, lorsquelle est charge au maximum, va pouvoir vous offrir jusqu 18 heures de musique un niveau dcoute standard.

Ce manuel dcrit tout ce que vous devez savoir pour utiliser au mieux T7. Il commence par numrer le contenu du carton de T7.

Remarque : avant dutiliser T7, assurez-vous davoir lu et compris les instructions de scurit incluses avec le produit.

FRANAIS

Contents

FRANAIS 2 1. Contenu du carton de T7 3

2. Faites connaissance avec T7 3

3. Chargement de la batterie 4

4. Mise sous et hors tension 4

5. Sources audio de T7 5

5.1 Connexion Bluetooth 5

5.2 Connexion filaire 6

6. Utilisation de T7 6

7. Indicateurs de T7 et alertes sonores 6

8. Mise jour du logiciel interne (firmware) de T7 6

9. Redmarrage 6

10. Nettoyage de T7 6

11. Problmes de fonctionnement 6

Spcifications 7

9

F R

A N

A

IS

1. Contenu du carton de T7

Enceinte T7 Alimentation T7 Adaptateurs dalimentation rgionaux Ensemble de documents dont un guide de

dmarrage rapide, des informations concernant la garantie et les avertissements lgaux en termes de scurit.

Information sur l'environnement Ce produit est conforme avec les directives internationales, y compris mais non limit la restriction des substances dangereuses (RoHS) dans les quipements lectriques et quipements lectroniques, lenregistrement, l'valuation, lautorisation et la restriction des substances chimiques (REACH) et l'limination des dchets lectriques et lectroniques (WEEE). Consultez votre centre local dlimination des dchets pour des conseils appropris sur la manire de recycler ou d'liminer ce produit.

Remarque : T7 nest pas tanche leau et par consquent il ne doit pas tre utilis dans ou proximit denvironnements humides tels que les salles de bains, les piscines ou saunas.

2. Faites connaissance avec T7

T7 est une enceinte hi-fi conue avant tout pour offrir une portabilit maximale. Une fois quelle sera mise en route par simple pression sur le bouton Power situ sur le ct droit, elle pourra tre pilot par Bluetooth ou via les touches Lecture/Pause, Volume+ et Volume situes sur son panneau suprieur. Une diode indicatrice bleue, ct du bouton Bluetooth, dfinit ltat de la connexion sans fil et une colonne dindicateurs lumineux situe au-dessus du bouton Power affiche le niveau de charge de la batterie. Enfin, T7 produit des messages sonores en retour certaines commandes ou vnements.

Les bornes de connexion larrire de T7 sont : une prise d'alimentation, une entre audio analogique au standard jack stro 3.5mm, et une prise micro- USB ddie aux mises jour logicielles. Un bouton de redmarrage (par insertion dun trombone par exemple) est galement propos larrire de T7.

Schma 1 Touches de commande et bornes de connexions.

Jumelage Bluetooth

Lecture/Pause Diminuer Volume

Augmenter Volume

On/Off/Vrifier la batterie Auxiliaire Maintenance uniquement

Rinitiali sationAlimen tation

10

F R

A N

A

IS

Schma 4 Diodes indiquant le pourcentage de charge de la batterie

3. Chargement de la batterie

Au dballage, la batterie de T7 sera partiellement charge. Pour charger la batterie de T7, merci de suivre les diffrentes tapes dcrites ci-dessous.

Slectionnez l'adaptateur rgional qui est appropri au format des prises secteur de votre pays de rsidence et insrez le dans le corps de boitier dalimentation tel que dcrit sur le Schma 2.

Branchez le boitier dalimentation de T7 dans une prise murale et connectez lautre extrmit dans le connecteur dalimentation de T7. Cette opration est illustre sur le schma 3. Si la prise de courant que vous utilisez est quipe dun disjoncteur, veuillez le mettre sur marche.

Ds que T7 est branch, sa batterie va commencer se recharger. Une charge complte si la batterie est compltement vide va ncessiter environ quatre heures. Au dballage, il est prfrable de laisser branch T7 jusqu ce quil soit compltement recharg, bien quil soit possible de lutiliser pendant la charge.

Lorsquon appuie et que lon relche rapidement le bouton Power, les indicateurs lumineux situs sur le ct droit de T7 vont brivement sclairer, pour indiquer le niveau de charge de lappareil. Le nombre de diodes qui va sallumer est fonction du pourcentage de charge, voir le schma 4.

Remarque : vous pouvez recharger T7 tout moment, quel que soit le niveau de charge de la batterie.

4. Mise sous et hors tension

Pour mettre T7 sous ou hors tension, maintenez appuy le bouton Power pendant 2 secondes. T7 va produire un son en retour lorsquil est mis sous tension.

Remarque : lorsque T7 nest pas utilis pendant plus de 10 minutes, il va automatiquement passer en mode veille. Il sera ractiv par le flux audio Bluetooth issu dun priphrique jumel. T7 sera aussi ractiv si la touche Bluetooth ou la touche Power est presse. Si T7 nest pas utilis au bout de 20 minutes, il passera automatiquement sur off.

Si T7 na pas encore t utilis, ou sil nest pas porte ou pas encore jumel un ou plusieurs priphriques Bluetooth, il ne fonctionnera quavec une source Auxiliaire. Reportez-vous au paragraphe suivant de ce manuel pour des informations sur la connexion des priphriques Bluetooth.

Schma 3 Branchement de T7 la prise secteur

Schma 2 Slectionnez ladaptateur secteur appropri

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

11

F R

A N

A

IS

Schma 5 Configuration Bluetooth

5. Sources audio de T7

T7 pourra diffuser soit le flux audio sans fil issu dun appareil Bluetooth compatible, soit le flux audio filaire de n'importe quel appareil quip dune sortie analogique.

T7 va basculer de faon automatique entre ses entres Bluetooth ou filaire, bien que la connexion Bluetooth soit prioritaire. Les rgles de slection des sources sont les suivantes :

Si T7 est connect en Bluetooth et quune prise est branche sur son entre Auxiliaire, T7 va alors basculer automatiquement sur son entre Auxiliaire .

Si T7 est en train de diffuser un flux audio via son entre Auxiliaire et quil reoit un flux Bluetooth ou que la touche Bluetooth est appuye, alors T7 va basculer sur lentre/la source Bluetooth.

Si T7 est en train de diffuser un flux audio via son entre Auxiliaire et que le cble est dbranch, T7 va automatiquement basculer sur son entre Bluetooth et va essayer de se connecter au priphrique Bluetooth principal.

Remarque : si T7 est connect en Bluetooth, et quun cble est aussi branch son entre Auxiliaire, larrive dun nouveau signal analogique ne fera pas automatiquement basculer T7 sur son entre Auxiliaire.

5.1 Connexion Bluetooth

Pour pouvoir connecter T7 un appareil dot de la technologie Bluetooth, il est au pralable ncessaire quil soit jumel avec lappareil en question. Une fois jumels, lappareil Bluetooth et T7 vont se rappeler lun de lautre et pourront se connecter automatiquement quand ils seront porte.

T7 est capable de mmoriser jusqu huit priphriques Bluetooth. Le premier appareil qui a t jumel est dsign comme le priphrique principal , et les appareils suivants comme les priphriques secondaires .

Le priphrique principal se connectera automatiquement T7 ds quil sera porte. A linverse, les priphriques secondaires ne se connecteront pas automatiquement : ils devront tre connects manuellement au niveau de leurs paramtres Bluetooth.

Il est possible de jumeler deux appareils Bluetooth simultanment T7. Cependant, un seul flux audio pourra tre cout la fois. Quand deux appareils sont connects, le second priphrique pourra venir remplacer le flux audio en cours.

Pour jumeler un priphrique Bluetooth T7, merci de suivre les tapes dcrites ci-dessous.

Le T7 tant en marche (sur on), maintenez appuy le bouton Bluetooth pendant 2 secondes. La diode situe ct du bouton Bluetooth va clignoter et paralllement, T7 va mettre un message sonore ds lors quil va rentrer en mode dit de jumelage .

Remarque : T7 va automatiquement sortir du mode jumelage si aucun appareil Bluetooth nest jumel au bout de 5 minutes.

2 secondes

Devices Bowers & Wilkins T7

12

F R

A N

A

IS

Ouvrez la page de paramtrage Bluetooth de lappareil source que vous voulez connecter, et vrifiez que la fonction Bluetooth est bien active. Ds que T7 apparait dans la liste des appareils Bluetooth disponibles, slectionnez-le et fermez la page de paramtrage. Lindicateur Bluetooth de T7 va clignoter pendant la phase dappairage puis sallumer en continu ds que celui-ci sera tabli. T7 va galement produire un signal sonore ds le jumelage est tabli.

Remarque : au cas o votre source audio Bluetooth ne serait pas compatible avec un jumelage simple et ncessiterait la saisie dun code sur quatre caractres, entrez simplement : 0000 .

Lorsque la connexion a t tablie, vrifiez que T7 a bien t choisi comme enceinte/haut- parleur de sortie. Le signal audio pourra alors tre entendu au travers de T7.

La mmoire contenant la liste des appareils jumels pourra tre efface en maintenant appuyes simultanment la touche Volume et la touche Bluetooth pendant au moins 2 secondes. La diode indicatrice Bluetooth va alors clignoter et T7 redmarrera quand la mmoire sera efface.

Pour dconnecter un appareil Bluetooth de T7, appuyez deux fois de suite rapidement sur la touche Bluetooth. Cette opration va dconnecter tous les appareils Bluetooth. En retour, T7 va mettre un son lorsque les sources Bluetooth seront dconnectes.

5.2 Connexion filaire

Effectuez le branchement lentre Auxiliaire en utilisant un cble appropri. T7 va slectionner automatiquement son entre Auxiliaire sil dtecte quune prise y a t branche. Si la source analogique que vous avez connecte dispose dun rglage de volume, rglez-le dans un premier temps un niveau moyen. Utilisez les boutons de rglages de T7 pour ajuster le volume plutt que ceux de la source. Servez-vous des rglages de volume de la source uniquement si ceux de T7 savraient inadquats.

Remarque : T7 va systmatiquement basculer sur son entre Bluetooth ds quil reoit le flux audio issu dun appareil Bluetooth connect.

6. Utilisation de T7

Une fois quil a t jumel un appareil Bluetooth ou connect une source audio analogique, lutilisation de T7 est simple.

Pour augmenter ou pour diminuer le volume maintenez respectivement appuyes les touches de Volume + et .

Pour lancer la lecture ou faire une pause pendant la lecture servez-vous du bouton Lecture/Pause de T7. Pour passer la piste suivante, appuyez rapidement deux fois sur le bouton Lecture/Pause. Pour revenir la piste prcdente, appuyez rapidement trois fois sur le bouton Lecture/Pause.

Remarque : la touche Lecture/Pause ne contrle pas le flux audio de lentre Auxiliaire de T7.

Pour connecter le priphrique Bluetooth principal, appuyez sur la touche Bluetooth.

Pour dconnecter la source Bluetooth courante, appuyez deux fois rapidement sur la touche Bluetooth. Si deux appareils Bluetooth sont connects simultanment au T7, les deux priphriques seront dconnects. Le T7 va produire un son au moment de la dconnexion Bluetooth et basculer sur son entre Auxiliaire.

Pour choisir une source audio filaire branchez le cble ou dconnectez la source Bluetooth.

Pour vrifier le niveau de charge de la batterie appuyez sur le bouton Power.

Pour mettre T7 hors tension maintenez appuy le bouton Power.

7. Indicateurs de T7 et alertes sonores

Bleu clignotant

T7 est en mode recherche de priphriques Bluetooth

Bleu continu T7 a t jumel avec succs avec un priphrique Bluetooth

Bleu clignotant (clignotement rapide)

Le jumelage a chou

Les diodes LED situes sur le ct de lappareil donnent une indication sur le niveau de charge de la batterie comme prcis dans le Schma 4

Des alertes sonores seront mises dans les conditions suivantes :

Mise sous tension Mise hors tension Activation du mode de recherche Bluetooth Connexion dun priphrique Bluetooth Dconnexion des priphriques Bluetooth Dbut de charge de la batterie Niveau de charge de la batterie faible Niveau de charge de la batterie critique

Remarque : il est possible de couper ou dactiver les alertes sonores en appuyant simultanment sur les touches Lecture/Pause et + .

8. Mise jour du logiciel interne (firmware) de T7

Des mises jour du logiciel de T7 peuvent tre disponibles rgulirement pour tlchargement au niveau de la section Support T7 du site internet de Bowers & Wilkins.

9. Redmarrage

Pour procder un redmarrage, maintenez appuy pendant deux secondes le bouton de redmarrage en vous servant de lextrmit dun trombone. T7 va alors steindre. Appuyez sur la touche Power pour terminer le redmarrage.

Remarque : procder un redmarrage nefface pas la mmoire des appareils jumels.

10. Nettoyage de T7

Essuyez simplement les surfaces avec un chiffon doux et non pelucheux.

11. Problmes de fonctionnement

Si vous avez besoin d'aide pour rsoudre un problme spcifique, ou si avez une question laquelle vous voudriez une rponse, veuillez-vous reporter notre guide de dpannage, ou aux Questions Frquemment Poses (FAQ) la page  Support T7 de notre site Web : www.bowers-wilkins.com

13

F R

A N

A

IS

Spcifications

Modle T7

Description Enceinte Portable sans Fil

Caractristiques techniques Bluetooth

Traitement numrique du signal ( DSP)

Amplificateurs Classe D Haute Qualit

Batterie rechargeable Lithium Ion

Haut-parleurs 2x 50 mm large bande

2x radiateurs auxiliaires de graves (ABR)

Rponse en frquence 59 Hz -19 kHz +/- 3dB

Gamme de frquence 50 21 kHz -6 dB

Puissance de lamplificateur de

sortie

2x 12 W

Alimentation Entre : 100-240V AC,50/60 Hz, 1.0A (bloc dalimentation)

Sortie : 15 V DC, 2.0 A

Consommation Standby : 0.141 W

Veille : 0.317 W

Temprature de fonctionnement Ce produit a t conu pour fonctionner une temprature

ambiante infrieure 45 C

Entres Auxiliaire-analogique (mini-jack 3.5 mm)

Service : mises jour logicielles (firmware)

Hauteur 114 mm

Largeur 210 mm

Profondeur 54 mm

Poids net 940 g

Coffret Polycarbonate

Firmware-Version 1.00 Die Bedienung kann von anderen Firmware-Versionen abweichen

14

D E

U T

S C

H

www.bowers-wilkins.com

Willkommen bei Bowers & Wilkins und herzlichen Glckwunsch zum T7 Vielen Dank, dass Sie sich fr Bowers & Wilkins entschieden haben. John Bowers hat unser Unternehmen in der berzeugung aufgebaut, dass wunderschnes Design, innovative Konstruktion und ausgeklgelte Technologien die Schlssel zu Audio- Entertainment der Extraklasse in Ihrem Zuhause sind. Wir teilen diese berzeugung und jedes von uns entwickelte Produkt basiert darauf.

Mit dem T7 haben Sie die Mglichkeit: Musik abzuspielen, die von Ihrem Mobiltelefon, Tablet oder

Computer ber die kabellose Bluetooth-Technologie gestreamt wird.

Musik abzuspielen, die ber einen kabelgebundenen Anschluss von einem Gert mit analogem Audioausgang bertragen wird.

Der T7 wird durch einen Lithium-Ionen-Akku betrieben, der bei vollstndiger Ladung und durchschnittlichen Lautstrkepegeln bis zu 18 Stunden Abspielzeit bereitstellt.

In dieser Bedienungsanleitung erfahren Sie alles notwendige, um das meiste aus Ihrem T7 herauszuholen. Zu Beginn wird der Kartoninhalt des T7 beschrieben.

Hinweis: Stellen Sie vor der Nutzung des T7 sicher, dass Sie sich mit den Sicherheitshinweisen, die diesem Produkt beiliegen, vertraut gemacht haben.

DEUTSCH

Contents

DEUTSCH 2 1. Kartoninhalt des T7 3

2. Den T7 kennenlernen 3

3. Aufladen des Akkus 4

4. An- und Ausschalten 4

5. Audioeingnge des T7 5

5.1 Verbindung per Bluetooth 5

5.2 Kabelgebundene Verbindung 6

6. Bedienung des T7 6

7. Anzeigen und hrbare Signale des T7 6

8. Firmware-Aktualisierung des T7 6

9. Neustart (Reboot) 6

10. Reinigung des T7 6

11. Fehlerbehebung 6

Technische Daten 7

15

D E

U T

S C

H

1. Kartoninhalt des T7

Lautsprecher T7 Ext. Netzteil Lnderspez. Steckdosenadapter Unterlagen

Umweltinformationen Dieses Produkt entspricht internationalen Richtlinien, insbesondere der Richtlinie zur Beschrnkung der Verwendung bestimmter gefhrlicher Stoffe in Elektro- und Elektronikgerten (RoHS), der Richtlinie zur Registrierung, Bewertung, Zulassung und Beschrnkung chemischer Stoffe (REACH) sowie der Richtlinie zur Entsorgung von Elektro- und Elektronik-Altgerten (WEEE). Wenden Sie sich an Ihre rtliche Entsorgungsstelle, wenn Sie Fragen zur ordnungsgemen Wiederverwendung bzw. Entsorgung dieses Produktes haben.

Hinweis: Der T7 ist nicht wasserfest und nicht zum Betrieb in Umgebungen mit hoher Luftfeuchtigkeit, wie beispielsweise Bad, Swimmingpool und Sauna, bestimmt.

2. Den T7 kennenlernen

Der T7 ist ein HiFi-Lautsprecher, der im Hinblick auf maximale Mobilitt entwickelt wurde. Nach dem Einschalten ber die Power-Taste auf der rechten Seite wird der T7 ber Bluetooth sowie die auf der Oberseite des Gerts liegenden Wiedergabe/Pause- Taste und die Lautstrketasten (+/-) gesteuert. Die blaue Leuchtanzeige neben der Bluetooth-Taste zeigt den Status der Bluetooth-Verbindung und die vertikal angeordneten, weien Leuchtanzeigen ber der Power-Taste den Ladestand des Akkus an. Der T7 gibt darber hinaus auch hrbare Rckmeldungssignale bei bestimmten Befehlen und Ereignissen aus.

Das Gert ist auf der Rckseite mit einem Anschluss fr die Stromversorgung, einem Aux-Eingang (3,5-mm-Klinke, Stereo) sowie einem Service- Port (Micro-USB-Anschluss), der ausschlielich zur Aktualisierung der Firmware genutzt wird, ausgestattet. Eine Neustart-Taste befindet sich ebenfalls auf der Rckseite des T7.

Abbildung 1 Tasten und Anschlsse

Bluetooth- Kopplung

Wiedergabe/ Pause

Lautstrke verringern

Lautstrke erhhen

An / Aus / Ladestand Aux Service-Port (Nur fr Firmware- Aktualisierung)

Neustart (Reboot)

Power

16

D E

U T

S C

H

Abbildung 4 Ladestandsanzeige

3. Aufladen des Akkus

Der T7 wird im teilweise geladenen Zustand ausgeliefert. Folgen Sie den untenstehenden Schritten, um den T7 zu laden.

Whlen Sie den fr Ihre Steckdose geeigneten Steckdosenadapter und stecken Sie diesen entsprechend der Abbildung 2 in das Netzteil.

Stecken Sie das Netzteil des T7 in die Steckdose und verbinden Sie das Stromanschlusskabel mit dem Anschluss fr die Stromversorgung am T7. Beachten Sie dazu Abbildung 3. Sollte die Steckdose mit einem Schalter versehen sein, schalten Sie diesen ein.

Sobald der T7 an die Stromversorgung angeschlossen ist, wird der Akku des T7 geladen. Die Ladezeit eines vollstndig entladenen Akkus bis zum vollstndigen Aufladen betrgt etwa 4 Stunden. Am besten ist es, den T7 bis zum vollstndigen Laden angeschlossen zu lassen. Sie knnen das Gert jedoch auch whrend des Ladevorgangs verwenden.

Wenn die Power-Taste kurz gedrckt und wieder losgelassen wird, leuchten die vertikal angeordneten Anzeigen auf der rechten Seite des T7 fr eine kurze Zeit auf und zeigen den gegenwrtigen Ladezustand des Akkus an. Dabei ist die Anzahl der leuchtenden LEDs vom Ladezustand abhngig, wie in Abbildung 4 angegeben.

Hinweis: Sie knnen den T7 zu jeder Zeit und unabhngig vom Akkuladestand aufladen.

4. An- und Ausschalten

Drcken und halten Sie die Power-Taste fr 2 Sekunden, um den T7 einzuschalten. Whrend des Einschaltvorgangs gibt das Gert ein hrbares Signal aus.

Hinweis: Wenn der T7 fr einen Zeitraum von lnger als 10 Minuten nicht verwendet wird, schaltet er automatisch in den Sleep-Modus. Durch das Starten eines Audio-Streams durch ein per Bluetooth gekoppeltes Gert wird der T7 wieder in Betrieb gesetzt. Darber hinaus schaltet der T7 auch bei Bettigen der Bluetooth- oder Power-Taste vom Sleep- in den Betriebsmodus. Bei einer Unttigkeit des T7 von lnger als 20 Minuten schaltet sich das Gert automatisch ab.

Wenn der T7 zum ersten Mal verwendet wird oder sich nach dem Einschalten nicht in Reichweite eines per Bluetooth verbundenen Gerts befindet, ist ausschlielich der Aux-Eingang betriebsbereit. Beachten Sie fr den Anschluss von Bluetooth- Gerten den folgenden Abschnitt dieser Bedienungsanleitung.

Abbildung 3 Den T7 an die Stromversorgung anschlieen

Abbildung 2 Auswahl eines geeigneten Steckdosenadapter

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

17

D E

U T

S C

H

Abbildung 5 Bluetooth einrichten

5. Audioeingnge des T7

Der T7 ist in der Lage, Audiosignale kabellos von einem kompatiblen Bluetooth-Gert oder ber eine kabelgebundene Verbindung von einem Gert mit einem analogen Ausgang wiederzugeben.

Der T7 whlt automatisch zwischen den Bluetooth- und kabelgebundenen Eingngen, wobei der Bluetooth-Eingang priorisiert wird. Folgende Regeln zur Auswahl des Eingangssignals finden Anwendung:

Wenn der T7 per Bluetooth verbunden und ein Klinkenstecker in den Aux-Eingang eingesteckt wird, schaltet der T7 auf den Aux-Eingang.

Wenn der T7 Audiosignale ber den Aux-Eingang abspielt und ein Bluetooth-Stream empfangen oder die Bluetooth-Taste bettigt wird, schaltet der T7 auf den Bluetooth-Eingang.

Wenn der T7 Audiosignale ber den Aux-Eingang abspielt und das Verbindungskabel entfernt wird, schaltet der T7 auf den Bluetooth-Eingang und versucht, eine Verbindung mit dem primr gekoppelten Gert herzustellen.

Hinweis: Wenn der T7 per Bluetooth verbunden ist und gleichzeitig ein Verbindungskabel fr den Aux-Eingang angeschlossen ist, schaltet der T7 bei Vorliegen eines neuen Analog-Signals nicht automatisch auf den Aux-Eingang.

5.1 Verbindung per Bluetooth

Um den T7 mit einem Gert zu verbinden, das Audiosignale per Bluetooth bermitteln kann, muss der T7 mit diesem Gert gekoppelt werden. Nach dem koppeln erinnern sich das Bluetooth-Gert und der T7 an einander und sind in der Lage, sich miteinander zu verbinden, sobald sie sich in Reichweite befinden.

Der T7 erinnert sich an bis zu acht gekoppelte Bluetooth-Gerte. Das erste gekoppelte Gert wird als primres Gert und zustzliche Gerte als sekundre Gerte gekennzeichnet.

Das primre Gert wird verbunden, sobald es sich in Reichweite befindet und die Bluetooth-Taste am T7 bettigt wurde. Sekundre Gerte werden nicht automatisch verbunden, wenn sie sich in Reichweite befinden, sondern mssen ber die Bluetooth- Einstellungen des entsprechenden Gerts verbunden werden.

Es ist mglich, dass sich zwei gekoppelte Gerte gleichzeitig mit dem T7 verbinden. Es wird jedoch nur das Audiosignal eines Gerts zur gleichen Zeit zu hren sein. Wenn zwei Gerte verbunden sind, kann das jeweils andere Gert den aktiven Stream unterbrechen.

Beachten Sie die folgenden Schritte, um ein Bluetooth-Gert mit dem T7 zu koppeln.

Drcken und halten Sie die Bluetooth-Taste am eingeschalteten T7 fr 2 Sekunden. Die Anzeige blinkt auf und der T7 gibt ein hrbares Signal aus, wenn es in den Verbindungsmodus schaltet.

Hinweis: Der T7 verlsst den Bluetooth- Kopplungsmodus, wenn nach 5 Minuten kein Gert gekoppelt werden konnte.

2 Sekunden

Devices Bowers & Wilkins T7

18

D E

U T

S C

H

Hrbare Signale werden bei folgenden Aktionen ausgegeben:

Einschalten Ausschalten Bluetooth-Erkennungsmodus aktiviert Bluetooth-Gert verbunden Bluetooth-Gert getrennt Akkuladevorgang gestartet Geringer Akkuladestand Kritischer Akkuladestand

Hinweise: Es besteht die Mglichkeit, die hrbaren Signale durch gleichzeitiges Bettigen der Tasten Wiedergabe/Pause und + an- bzw. auszuschalten.

8. Firmware-Aktualisierung des T7

Aktualisierte Firmware fr den T7 wird ber die Support-Seite fr den T7 auf der Webseite von Bowers & Wilkins in regelmigen Abstnden zur Verfgung gestellt.

9. Neustart (Reboot)

Verwenden Sie fr einen Neustart des Gerts eine gerade gebogene Broklammer und halten Sie damit die Reboot-Taste fr 2 Sekunden gedrckt. Bettigen Sie die Power-Taste nachdem der T7 abgeschaltet ist, um den Neustartvorgang abzuschlieen.

Hinweis: Durch einen Neustart wird die Liste der gespeicherten gekoppelten Gerte nicht gelscht.

10. Reinigung des T7

Wischen Sie die Oberflche des T7 mit einem sauberen fusselfreien Tuch ab.

11. Fehlerbehebung

Falls Sie Untersttzung bei der Behebung eines bestimmten Problems bentigen oder eine Frage haben, konsultieren Sie bitte die Support-Seite des T7 auf der Webseite von Bowers & Wilkins: www.bowers-wilkins.com

ffnen Sie die Bluetooth-Einstellungen des jeweiligen Gerts und stellen Sie sicher, dass Bluetooth aktiviert ist. Sobald der T7 gefunden wurde, erscheint Bowers & Wilkins T7 als verfgbares Gert. Whlen Sie T7 aus und schlieen Sie die Bluetooth-Einstellungen. Die Bluetooth-Anzeige des T7 zeigt durch Blinken an, dass eine Kopplung im Gange ist, und leuchtet durchgngig, wenn die Kopplung erfolgreich durchgefhrt wurde. Der T7 gibt bei der erfolgreich durchgefhrten Kopplung ein hrbares Signal aus.

Hinweis: Sollte Ihr Bluetooth-Audiogert kein einfaches Koppeln untersttzen und einen vierstelligen Code anfordern, geben Sie 0000 ein.

Stellen Sie nach der Herstellung einer Verbindung sicher, dass der T7 als Lautsprecherausgang ausgewhlt ist. Das Audiosignal wird nun ber den T7 wiedergegeben.

Der Speicher mit den gekoppelten Gerten kann gelscht werden, indem die Lautstrketaste (-) und die Bluetooth-Taste gedrckt und fr 2 Sekunden gehalten werden. Die Bluetooth-Anzeige blinkt auf und der T7 wird neu gestartet, sobald der Speicher gelscht worden ist.

Um ein Bluetooth-Gert vom T7 zu trennen, drcken Sie die Bluetooth-Taste in kurzen Abstnden zweimal hintereinander. Damit werden smtliche per Bluetooth verbundenen Gerte getrennt. Der T7 gibt ein hrbares Signal aus, wenn die Bluetooth- Verbindungen getrennt wurden.

5.2 Kabelgebundene Verbindung

Schlieen Sie ein Gert mittels eines geeigneten Kabels an den Aux-Eingang an. Der T7 whlt den Aux-Eingang bei Anschluss eines Klinkensteckers automatisch aus. Sollte die analoge Audioquelle ber eine Lautstrkeregelung fr diesen Ausgang verfgen, stellen Sie diese vorerst auf etwa halbe Lautstrke. Verwenden Sie anstelle der Lautstrkeregelung der Audioquelle lieber die Tasten zur Lautstrkeregelung am T7. Erhhen Sie die Lautstrke an der Audioquelle ausschlielich in Fllen, in denen die maximale Lautstrke am T7 nicht ausreicht.

Hinweis: Der T7 schaltet automatisch zum Bluetooth-Eingang, wenn ein Audio-Stream von einem verbundenen Bluetooth-Gert empfangen wird.

6. Bedienung des T7

Nachdem ein Bluetooth-Gert verbunden ist oder eine analoge Audioquelle per Kabel angeschlossen ist, ist die Bedienung kinderleicht.

Um die Lautstrke zu erhhen oder zu verringern, bettigen Sie entsprechend die Lautstrketaste (+) oder (-).

Um die Wiedergabe eines Bluetooth-Audiostreams zu starten oder anzuhalten, bettigen Sie die Wiedergabe/Pause-Taste. Um zum nchsten Titel zu wechseln, bettigen Sie die Wiedergabe/ Pause-Taste zweimal in kurzem Abstand. Um zum vorherigen Titel zurckzukehren, bettigen Sie die Wiedergabe/Pause-Taste dreimal in kurzem Abstand.

Hinweis: Mit der Wiedergabe/Pause-Taste kann die Wiedergabe von Audiosignalen des Aux- Eingangs nicht gesteuert werden.

Um das primre Bluetooth-Gert zu verbinden, bettigen Sie die Bluetooth-Taste.

Um das gegenwrtig verbundene Bluetooth-Gert zu trennen, bettigen Sie die Bluetooth-Taste zweimal in kurzem Abstand. Wenn zwei Bluetooth-Gerte mit dem T7 verbunden sind, werden beide Gerte getrennt. Der T7 gibt ein hrbares Signal aus, wenn die Bluetooth-Verbindung getrennt wurde und schaltet auf den Aux-Eingang.

Um den analogen kabelgebundenen Eingang des T7 auszuwhlen, stecken Sie einen Klinkenstecker ein oder trennen Sie das verbundene Bluetooth-Gert.

Um den Ladestand zu berprfen, drcken Sie die Power-Taste.

Um den T7 auszuschalten, halten Sie die Power- Taste gedrckt.

7. Anzeigen und hrbare Signale des T7

Blau, blinkend T7 ist im Koppelungsmodus

Blau, durchgngig leuchtend

T7 wurde erfolgreich mit einem Bluetooth-Gert gekoppelt

Blau, blinkend (schnelles Blinken)

Koppeln eines Gerts fehlgeschlagen

Die an der Seite des Produkts angebrachten LEDs zeigen den Ladestand des Akkus an (siehe Abbildung 4).

19

D E

U T

S C

H

Technische Daten

Modell T7

Beschreibung Mobiler Bluetooth-Lautsprecher

Technische Merkmale Bluetooth

Digital Signal Processing (DSP)

Hochwertige Class-D-Verstrker

Lithium-Ionen-Akku

Chassis 2 x 50-mm-Breitbandlautsprecher

2 x Auxiliary Bass Radiator (ABR)

Frequenzgang 58 Hz 19 kHz +/- 3 dB

Frequenzumfang -6 dB bei 50 Hz bis 21 kHz

Ausgangsleistung (Verstrker) 2 x 12 W

Spannungsversorgung Eingang: 100-240 V AC, 50/60 Hz, 1,0 A, (Stromversorgung)

Ausgang: 15 V DC, 2,0 A

Leistungsaufnahme Standby: 0,141 W

Sleep-Modus: 0,317 W

Betriebstemperatur Dieses Produkt ist ausschlielich fr den Betrieb in

Umgebungstemperaturen von bis zu 45C geeignet

Eingnge Auxiliary (Aux) analog (3,5-mm-Klinkenstecker, Stereo)

Service-Port nur fr Firmware-Aktualisierungen (Micro-USB)

Hhe 114 mm

Breite 210 mm

Tiefe 54 mm

Nettogewicht 940 g

Gehuse Polycarbonat

Versin del firmware: 1.00 El funcionamiento puede diferir del de otras versiones de firmware.

20

E S

P A

O

L

www.bowers-wilkins.com

Bienvenido a Bowers & Wilkins y al A7 Gracias por elegir Bowers & Wilkins. Cuando John Bowers fund nuestra compaa, lo hizo con la firme creencia de que el diseo imaginativo, la ingeniera innovadora y la tecnologa avanzada eran las claves que podran desbloquear el disfrute del sonido en el hogar. Se trata de una creencia que seguimos compartiendo y que inspira cada producto que diseamos.

La T7 puede ser utilizada para: Reproducir msica directamente desde su telfono mvil,

tableta u ordenador utilizando la tecnologa de conexin inalmbrica Bluetooth.

Reproducir msica utilizando una conexin por cable desde cualquier dispositivo equipado con una salida de audio analgica.

La T7 es alimentada por una batera de in de litio recargable que le permite, cuando est completamente cargada, de proporcionar hasta 18 horas de reproduccin ininterrumpida a niveles de volumen intermedios.

Este manual le contar todo lo que usted necesita saber para sacar el mximo provecho de la T7. Empieza describiendo el contenido del embalaje de la T7.

Nota: Antes de utilizar la T7, asegrese de haber ledo y entendido las instrucciones de seguridad incluidas con el producto.

ESPAOL

Contents

ESPAOL 2 1. Contenido del Embalaje del A7 3

2. Conociendo la T7 3

3. Carga de la batera 4

4. Puesta en marcha y desactivacin. 4

5. Entradas de audio de la T7 5

5.1 Conexin Bluetooth 5

5.2 Conexin por cable 6

6. Manejo de la T7 6

7. Indicadores Luminosos y Avisos Acsticos de la T7 6

8. Actualizacin del Firmware de la T7 6

9. Reinicializacin 6

10. Limpieza de la T7 6

11. Problemas y Posibles Soluciones 6

Caractersticas Tcnicas 7

21

E S

P A

O

L

1. Contenido del Embalaje del A7

Caja acstica T7 Fuente de alimentacin de la T7 Adaptadores para las clavijas de alimentacin

regionales Paquete con documentacin

Informacin Medioambiental Este producto satisface varias regulaciones internacionales relacionadas con la proteccin del medio ambiente, entre ellas aunque sin estar limitadas a las mismas- la de Restriccin del Uso de Sustancias Peligrosas (RoHS) en equipos elctricos y electrnicos, la de Registro, Evaluacin y Autorizacin del uso de Productos Qumicos REACH) y la de eliminacin de Residuos Procedentes de Equipos Elctricos y Electrnicos (WEEE). Para reciclar o desechar este producto adecuadamente, le sugerimos que contacte con sus autoridades locales en materia de gestin de residuos.

Nota: La T7 no es impermeable y no ha sido diseada para ser utilizada en ambientes con altas dosis de humedad como cuartos de bao, piscinas y saunas.

2. Conociendo la T7

La T7 es una caja acstica de Alta Fidelidad diseada siguiendo criterios de mxima portabilidad. Una vez puesta en marcha mediante el botn Power de su parte derecha, es controlada desde los botones Bluetooth, Play/Pause, Volume + y Volume de su panel superior. Un indicador luminoso de color azul situado junto al botn Bluetooth muestra el estado de la conexin Bluetooth, mientras que una columna de indicadores luminosos en color blanco situados encima de del botn Power muestra el nivel de carga de la batera. La T7 proporciona incluso avisos audibles para determinados eventos y rdenes de control.

Las conexiones disponibles en el panel posterior de la T7 son una entrada para la fuente de alimentacin, una entrada auxiliar (toma estereofnica de 35 mm) y un puerto de mantenimiento utilizado nicamente para realizar actualizaciones de firmware (toma USB micro). En la zona posterior de la T7 tambin se dispone de un pequeo botn/pulsador de reinicializacin.

Diagrama 1 Botones y conectores

Sincronizacin Bluetooth

Reproduccin/ Pausa

Reducir nivel de volumen

Aumentar nivel de volumen

Encendido / Apagado / Comprobar Batera

Auxiliar Mantenimiento (slo actualiza- ciones de firmware)

ReinicializacinPuesta en Marcha

22

E S

P A

O

L

Diagrama 4 Indicador del estado de la batera

3. Carga de la batera

La T7 estar parcialmente cargada cuando la desembale por vez primera. Para cargar la T7, siga los pasos que se describen a continuacin.

Seleccione el adaptador regional apropiado para la clavija de alimentacin correspondiente a su territorio e insrtelo en el cuerpo de la fuente de alimentacin tal como se ilustra en el Diagrama 2.

Conecte la fuente de alimentacin de la T7 a una toma de corriente elctrica alterna y conecte el cable de salida de aqulla a la entrada de alimentacin de la T7. Esto se ilustra en el Diagrama 3. Si la toma de corriente elctrica alterna incorpora un aislador, actvelo.

Una vez que la T7 est conectada a la red elctrica, su batera empezar a cargarse. Una carga completa a partir de un estado de descarga total tardar aproximadamente 4 horas en llevarse a cabo. Inicialmente es mejor dejar la T7 hasta que su batera est completamente cargada, aunque puede ser utilizada mientras se est cargando.

Cuando el botn Power sea brevemente pulsado y liberado, los cinco indicadores luminosos de la columna que figura en la parte derecha de la T7 se activarn durante un corto intervalo de tiempo para indicar el estado de la carga de la batera. La iluminacin de los indicadores depender del nivel de carga, tal y como se muestra en el Diagrama 4.

Nota: Puede cargar la batera de la T7 en cualquier momento independientemente de cul sea el nivel de la misma.

4. Puesta en marcha y desactivacin.

Para activar y desactivar la T7, pulse y mantenga pulsado el botn Power durante 2 segundos. La T7 emitir un aviso acstico de confirmacin cuando est activada.

Nota: Si la T7 no va a ser utilizada durante ms de 10 segundos, entrar automticamente en el modo de reposo (sleep). La T7 se activar de nuevo cuando reciba una seal de audio va Bluetooth desde un dispositivo sincronizado. La T7 tambin saldr del modo de reposo si se pulsa bien el botn Bluetooth, bien el botn Power. Si la T7 no es utilizada durante ms de 20 minutos, se desactivar automticamente

Si la T7 no ha sido utilizada con anterioridad o no est dentro del alcance de dispositivos Bluetooth previamente conectados cuando es puesta en marcha por primera vez, slo estar operativa su entrada auxiliar. Para ms informacin sobre la conexin de dispositivos Bluetooth, le rogamos que consulte la siguiente seccin del presente manual.

Diagrama 3 Conexin de la T7 a una toma de corriente elctrica alterna

Diagrama 2 Seleccin del adaptador apropiado

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

23

E S

P A

O

L

Diagrama 5 Configuracin Bluetooth

5. Entradas de audio de la T7

La T7 puede reproducir seales de audio tanto sin cables desde un dispositivo Bluetooth compatible como mediante una conexin con cables desde un dispositivo equipado con una salida analgica.

La T7 seleccionar automticamente entre sus entradas Bluetooth o por cable, aunque la entrada Bluetooth tiene prioridad. Para la seleccin de entradas se aplicarn las siguientes reglas:

Si la T7 est conectada por Bluetooth y se inserta una clavija en la toma de entrada Auxiliar, la T7 conmutar a dicha entrada.

Si la T7 est reproduciendo msica desde su entrada Auxiliar y recibe una seal va Bluetooth o se pulsa el botn Bluetooth, la T7 conmutar a la entrada Bluetooth.

Si la T7 est reproduciendo msica desde su entrada Auxiliar y el cable es desconectado, la T7 conmutar a la entrada Bluetooth e intentar conectarse a la fuente sincronizada en primer lugar.

Nota: Si la T7 est conectada va Bluetooth estando a la vez conectado un cable a su entrada Auxiliar, la presencia de una nueva seal de audio analgica no har que la T7 conmute automticamente a su entrada Auxiliar.

5.1 Conexin Bluetooth

Para conectar la T7 a un dispositivo de audio compatible Bluetooth, en primer lugar debe ser sincronizada (emparejada) con dicho dispositivo. Una vez efectuada dicha sincronizacin, tanto el dispositivo Bluetooth como la T7 se reconocern y podrn conectarse siempre y cuando estn dentro de un determinado rango de cobertura.

La T7 reconocer hasta ocho dispositivos Bluetooth sincronizados. El primero de los dispositivos sincronizados ser designado como dispositivo primario, mientras que los dispositivos adicionales sern designados como dispositivos secundarios.

El dispositivo primario ser conectado cuando est dentro del rango de cobertura y se pulse el botn Bluetooth. Los dispositivos secundarios no se conectarn automticamente cuando estn dentro del rango de cobertura sino que debern ser conectados mediante sus ajustes Bluetooth.

Es posible conectar dos dispositivos sincronizados a la T7. Sin embargo, la seal de audio slo podr escucharse a partir de un nico dispositivo. Es posible que cuando se conecten dos dispositivos el segundo de ellos se superponga a la seal activa.

Para sincronizar un dispositivo Bluetooth con la T7, siga los pasos que se describen a continuacin:

Con la T7 activada, pulse y mantenga pulsado el botn Bluetooth durante 2 segundos. El indicador luminoso parpadear y la T7 emitir un tono de confirmacin audible cuando entre en el modo de sincronizacin.

Nota: Si no se sincroniza ningn dispositivo en el transcurso de 5 minutos, la T7 saldr automticamente del modo de sincronizacin Bluetooth.

2 segundos

Devices Bowers & Wilkins T7

24

E S

P A

O

L

Abra los ajustes Bluetooth del dispositivo fuente y asegrese de que la conexin Bluetooth est activada. Cuando haya sido detectada, la Bowers & Wilkins T7 aparecer como un dispositivo Bluetooth disponible. Seleccione T7 y cierre los ajustes Bluetooth. El indicador luminoso Bluetooth parpadear mientras el proceso de sincronizacin est en marcha y se iluminar por completo cuando dicho proceso haya sido finalizado. La T7 tambin emitir una confirmacin audible cuando se haya establecido la sincronizacin.

Nota: Si su dispositivo de audio Bluetooth no admite una sincronizacin simple y le solicita un cdigo de cuatro dgitos, introduzca 0000.

Cuando se haya establecido una conexin, asegrese de que la T7 ha sido seleccionada como caja acstica de salida. A partir de este momento, usted podr escuchar msica con la T7.

La memoria del dispositivo sincronizado tambin puede ser borrada pulsando y manteniendo pulsados los botones Volume y Bluetooth durante 2 segundos. El indicador luminoso Bluetooth parpadear y la T7 se volver a poner en marcha una vez que la memoria haya sido borrada.

Para desconectar un dispositivo Bluetooth de la T7, pulse rpidamente dos veces seguidas el botn Bluetooth de la T7. Esto desconectar todos los dispositivos Bluetooth conectados. La T7 proporcionar conformacin audible cada vez que se desactive la conexin Bluetooth.

5.2 Conexin por cable

Conecte el dispositivo a la entrada Auxiliar utilizando un cable apropiado. La T7 seleccionar su entrada Auxiliar automticamente cuando la clavija haya sido insertada. Si la fuente de audio analgica incluye un control del nivel de volumen de salida, ajstelo inicialmente a aproximadamente la mitad. Para controlar el nivel de volumen, utilice los botones de la T7 y no los de la fuente. Aumente el nivel de volumen de la fuente nica y exclusivamente si el nivel de volumen mximo de la T7 es inadecuado.

Nota: La T7 siempre conmutar automticamente a su entrada Bluetooth si recibe una seal de audio procedente de un dispositivo Bluetooth conectado.

6. Manejo de la T7

Una vez que la T7 ha sido sincronizada con una fuente Bluetooth o conectada por cable a una fuente de audio analgica, su funcionamiento es muy sencillo.

Para aumentar o reducir el nivel de volumen, pulse los botones Volume + o Volume respectivamente.

Para reproducir o interrumpir momentneamente pausa- una seal de audio enviada por Bluetooth, pulse el botn Play/Pause de la T7. Para saltar a la siguiente cancin, pulse rpidamente dos veces seguidas el botn Play/Pause. Para saltar a la cancin anterior, pulse rpidamente tres veces seguidas el botn Play/Pause.

Nota: El botn Play/Pause no controlar la seal de audio de la entrada Auxiliar.

Para conectarse a la fuente Bluetooth primaria, pulse el botn Bluetooth.

Para desconectarse de la fuente Bluetooth conectada en ese momento, pulse rpidamente dos veces seguidas el botn Bluetooth. En el caso de que estn conectados dos dispositivos Bluetooth a la T7, ambos sern desconectados. La T7 proporcionar una confirmacin audible de la desconexin Bluetooth y conmutar a la entrada Auxiliar.

Para seleccionar la entrada analgica por cable de la T7, inserte una clavija de conexin o desconecte la fuente Bluetooth conectada.

Para comprobar la carga de la batera de la T7, pulse el botn Power.

Para desactivar la T7, pulse y mantenga pulsado el botn Power.

7. Indicadores Luminosos y Avisos Acsticos de la T7

Parpadeo en azul La T7 est en modo visible

Azul estacionario La T7 ha sido sincronizada con xito con un dispositivo Bluetooth

Parpadeo rpido en azul

Sincronizacin errnea

Los indicadores luminosos (LEDs) que figuran en los laterales del producto informan sobre el estado de la batera, tal y como se indica en el Diagrama 4.

Los avisos acsticos se emiten para las siguientes acciones:

Puesta en marcha (On) Desactivacin (Off) Entrada en el modo de visibilidad Bluetooth Dispositivo Bluetooth conectado Dispositivo Bluetooth desconectado Carga de la batera iniciada Carga de la batera baja Carga de la batera crtica

Nota: Es posible activar o desactivar los avisos acsticos pulsando y liberando los botones Play/Pause y +.

8. Actualizacin del Firmware de la T7

Es posible que de vez en cuando est disponible para su descarga firmware actualizado de la T7 en la correspondiente seccin de soporte del sitio web de Bowers & Wilkins.

9. Reinicializacin

Para llevar a cabo una reinicializacin, utilice la punta de un clip sujetapapeles con el fin de pulsar y mantener pulsado el botn de Reinicializacin (Reboot) durante 2 segundos. La T7 se desactivar. A continuacin pulse el botn Power y la reinicializacin se habr completado.

Nota: La ejecucin de una reinicializacin no borrar la memoria del dispositivo sincronizado.

10. Limpieza de la T7

Limpie las superficies de la T7 con una gamuza seca libre de hilos.

11. Problemas y Posibles Soluciones

Si necesita ayuda para resolver un problema especfico o hay alguna cuestin sobre la que desea preguntarnos, le rogamos que consulte la seccin de soporte de la T7 del sitio web de Bowers & Wilkins. www.bowers-wilkins.com

25

E S

P A

O

L

Caractersticas Tcnicas

Modelo T7

Descripcin Caja Acstica Porttil Inalmbrica

Detalles tcnicos relevantes Bluetooth

Procesado Digital de Seal (DSP)

Amplificadores en Clase D de Alta Calidad

Batera de in de litio recargable

Transductores utilizados 2 altavoces de gama completa de 50 mm de dimetro

2 Radiadores de Graves Auxiliares (ABR)

Respuesta en frecuencia 58-19.000 Hz, +/-3dB

Rango de frecuencias cortes a -6 dB en 50 Hz y 21 kHz

Potencia de salida del amplificador 2x12 W

Tensin de alimentacin Entrada: 100-240 V CA, 50/60Hz, 1 A (fuente de alimentacin)

Salida: 15 V CC, 2 A

Consumo Standby: 0'141 W

Reposo ("Sleep"): 0'317 W

Temperatura de funcionamiento Este producto est diseado nicamente para funcionar a una

temperatura ambiente de hasta 45C

Entradas Auxiliar analgica (toma estereofnica de 3'5 mm)

Slo para mantenimiento actualizaciones de firmware (USB micro)

Altura 114 mm

Anchura 210 mm

Profundidad 54 mm

Peso neto 940 g

Material del recinto Policarbonato

Verso do firmware 1.00 O funcionamento pode diferir para outras verses de firmware.

26

P O

R T

U G

U

S

www.bowers-wilkins.com

Bem-vindo Bowers & Wilkins e coluna T7 Obrigado por ter escolhido a Bowers & Wilkins. Quando John Bowers criou a Bowers & Wilkins, f-lo porque acreditava que o design imaginativo, a engenharia inovadora e a tecnologia avanada so as chaves que lhe permitem usufruir de um excelente udio em casa. A sua crena algo que continuamos a partilhar e que inspira cada produto que desenhamos.

A T7 pode ser usada para: Reproduzir msica transmitida por um telemvel, tablet ou

computador com tecnologia sem fios Bluetooth. Reproduzir msica usando uma ligao com fios, a partir de

qualquer dispositivo que disponha de uma sada de udio analgico.

A coluna T7 alimentada por uma bateria recarregvel de ies de ltio com capacidade para 18 horas de reproduo, quando totalmente carregada e em volume mdio.

Este manual explica tudo o que precisa de saber para tirar o mximo partido da T7. Comea por descrever o contedo da embalagem da T7.

Nota: Antes de utilizar a T7, certifique-se de que l e compreende as instrues de segurana includas com o produto.

PORTUGUS

ndice

PORTUGUS 2 1. Contedo da caixa da T7 3

2. Introduo coluna T7 3

3. Carregamento da bateria 4

4. Ligar e desligar 4

5. Entradas de udio da T7 5

5.1 Ligao Bluetooth 5

5.2 Ligao com fios 6

6. Modo de funcionamento da T7 6

7. Indicadores e sinais sonoros da T7 6

8. Actualizao do firmware da T7 6

9. Reiniciar 6

10. Limpeza da T7 6

11. Resoluo de problemas 6

Especificaes tcnicas 7

27

P O

R T

U G

U

S1. Contedo da caixa da T7

Coluna T7. Carregador T7. Adaptadores para tomadas elctricas. Folheto de instrues

Informao ambiental Este produto cumpre as directivas internacionais, incluindo mas no se limitando s seguintes normas: Directiva relativa restrio do uso de determinadas substncias perigosas (RoHS: Restriction of Hazardous Substances); Regulamento relativo ao registo, avaliao, autorizao e restrio de substncias qumicas (REACH - Registration, Evaluation, Authorisation and restriction of Chemicals) e Directiva relativa aos Resduos de Equipamentos Elctricos e Electrnicos (REEE). Consulte uma entidade local de recolha de lixo para obter informao sobre como reciclar ou eliminar este produto de forma correcta.

Nota: A T7 no prova de gua e no foi concebida para utilizao em ambientes com uma elevada humidade, tais como casas de banho, piscinas e saunas.

2. Introduo coluna T7

A T7 uma coluna Hi-Fi concebida com a mxima portabilidade em mente. Aps ser ligada, no boto Power que se encontra no lado direito, pode control- la atravs dos botes de Bluetooth, Reproduzir/Pausa, Volume + e Volume existentes no painel superior. Um indicador azul adjacente ao boto Bluetooth apresenta o estado da ligao Bluetooth e uma coluna de indicadores brancos acima do boto Power apresenta o nvel de carga da bateria. A T7 tambm produz um sinal sonoro para algumas funes de controlo e eventos.

As ligaes na parte de trs da T7 incluem uma entrada de alimentao elctrica, uma entrada auxiliar (ficha estreo de 3,5 mm) e uma porta de servio utilizada apenas para actualizaes de firmware (micro- USB). Na parte de trs da T7, existe tambm um boto de reincio embutido num orifcio.

Diagrama 1 Botes e entradas.

Emparelhamento Bluetooth

Reproduzir/ Pausa

Reduzir volume

Aumentar volume

Ligar / Desligar / Verificar bateria

Auxiliar (Aux)

Servio (Service) (apenas actualizao de firmware)

Reiniciar (Reboot)

Alimentao (Power)

28

P O

R T

U G

U

S

Diagrama 4 Indicador de carga da bateria.

3. Carregamento da bateria

A T7 fornecida parcialmente carregada. Para carregar a T7, siga os passos descritos a seguir.

Seleccione o adaptador para tomada elctrica adequado ao seu pas e encaixe-o no carregador, como ilustrado no Diagrama 2.

Ligue o carregador da T7 a uma tomada elctrica na parede e ligue o cabo do carregador entrada de alimentao elctrica da T7. Isto est ilustrado no Diagrama 3. Se a tomada dispuser de um dispositivo de proteco contra picos de corrente, ligue-o.

Depois de a T7 estar ligada corrente, a bateria comear a carregar. O carregamento completo de uma bateria totalmente descarregada demora cerca de 4 horas. Inicialmente, o ideal ser que deixe a T7 ligada at a bateria estar totalmente carregada, apesar de ser possvel us-la enquanto est a carregar.

Quando o boto Power premido momentaneamente e, depois, libertado, a coluna de cinco indicadores do lado direito da T7 ilumina-se por um curto perodo, para indicar o estado da carga da bateria. A iluminao do indicador depende do nvel de carga, de acordo com o ilustrado no Diagrama 4.

Nota: Pode carregar a T7 a qualquer momento, independentemente do nvel da bateria.

4. Ligar e desligar

Para ligar ou desligar a T7, prima e mantenha o boto Power durante 2 segundos. A T7 emite um sinal sonoro quando se liga.

Nota: Se a T7 no for usada por mais de 10 minutos, entrar automaticamente em modo de suspenso. Para sair do modo de suspenso da T7, inicie uma transmisso de udio por Bluetooth a partir de um dispositivo emparelhado. Para sair do modo de suspenso da T7, prima o boto de Bluetooth ou Power. Se a T7 no for usada por mais de 20 minutos, desliga-se automaticamente.

Se a T7 no tiver sido usada antes, ou se no estiver ao alcance de um dispositivo Bluetooth ao qual tivesse sido previamente ligada, apenas estar operacional a entrada auxiliar. Consulte a seco seguinte deste manual para obter informaes sobre como ligar a dispositivos Bluetooth.

Diagrama 3 Ligar a T7 tomada elctrica.

Diagrama 2 Seleccionar o adaptador adequado.

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

29

P O

R T

U G

U

S

Diagrama 5 Configurao do Bluetooth

5. Entradas de udio da T7

A coluna T7 pode reproduzir udio atravs de uma ligao sem fios (a partir de um dispositivo Bluetooth compatvel), ou atravs de uma ligao com fios (a partir de um dispositivo com sada analgica).

A T7 activa automaticamente as entradas Bluetooth ou com fios, apesar de a entrada Bluetooth ter prioridade. Aplicam-se as seguintes regras de activao de entradas:

Se a T7 estiver ligada via Bluetooth e for inserida uma ficha na entrada auxiliar, a T7 activar a entrada auxiliar.

Se a T7 estiver a reproduzir udio atravs da entrada auxiliar e receber uma transmisso de udio por Bluetooth, ou se o boto Bluetooth for premido, a T7 activa a entrada Bluetooth.

Se a T7 estiver a reproduzir udio atravs da entrada auxiliar e o cabo for desligado, a T7 activa a entrada Bluetooth e tenta ligar ao dispositivo emparelhado como primrio.

Nota: Se a T7 estiver ligada via Bluetooth ao mesmo tempo que est ligado um cabo de entrada auxiliar, um novo sinal udio analgico no activar automaticamente a entrada auxiliar da T7.

5.1 Ligao Bluetooth

Para ligar a T7 a um dispositivo de udio por Bluetooth, necessrio, em primeiro lugar, "emparelhar" os dois dispositivos. Depois de emparelhados, o dispositivo Bluetooth e a T7 registam os dados da ligao, conseguindo ligar-se com facilidade quando estiverem distncia adequada.

A T7 registar at oito dispositivos Bluetooth emparelhados. O primeiro dispositivo emparelhado ser designado como o dispositivo "primrio", sendo os seguintes designados como "secundrios".

O dispositivo primrio ser ligado quando estiver no alcance da T7 e o boto Bluetooth for premido. Os dispositivos secundrios no ligaro automaticamente quando estiverem no alcance, pelo que devem ser ligados atravs das respectivas definies Bluetooth.

possvel ligar dois dispositivos emparelhados simultaneamente T7. Contudo, apenas ser possvel reproduzir o udio de um dos dispositivos de cada vez. Quando esto ligados dois dispositivos, o segundo dispositivo pode sobrepor-se transmisso que est a decorrer.

Para emparelhar um dispositivo Bluetooth com a T7, siga os passos descritos a seguir.

Com a T7 ligada, prima e mantenha o boto Bluetooth durante 2 segundos. O indicador pisca e a T7 emite um sinal sonoro quando entra em modo de "emparelhamento".

Nota: A T7 sai automaticamente do modo de emparelhamento Bluetooth se o emparelhamento no se efectuar aps 5 minutos.

Abra as definies de Bluetooth no dispositivo que fornece o udio e verifique se o Bluetooth est ligado. Depois de ter sido descoberta, aparece a Bowers & Wilkins T7 na lista de dispositivos Bluetooth disponveis. Seleccione a T7 e feche as definies de Bluetooth. O indicador de Bluetooth da T7 pisca enquanto decorre o emparelhamento e fica aceso quando o emparelhamento est estabelecido. A T7 tambm emite um sinal sonoro quando fica emparelhada.

2 segundos

Devices Bowers & Wilkins T7

30

P O

R T

U G

U

SNota: Se o dispositivo de udio Bluetooth no suportar emparelhamento "simples" e pedir um cdigo de quatro dgitos, escreva "0000".

Depois de ter sido estabelecida uma ligao, verifique se a T7 est seleccionada como a sada de som. O udio deve ento ser ouvido atravs da coluna T7.

A memria do dispositivo emparelhado pode ser limpa premindo e mantendo premidos os botes Volume  e Bluetooth durante 2 segundos. O indicador Bluetooth pisca e a T7 reinicia quando a memria tiver sido limpa.

Para desligar um dispositivo Bluetooth da T7, prima rapidamente o boto Bluetooth da T7 duas vezes. Esta operao desliga todos os dispositivos Bluetooth ligados. A T7 tambm emite um sinal sonoro quando o Bluetooth desligado.

5.2 Ligao com fios

Ligue um cabo adequado entrada auxiliar. A T7 activa a entrada auxiliar automaticamente quando inserida uma ficha. Se a entrada de udio analgica tiver um controlo de volume de sada, defina-a inicialmente para cerca de metade do volume. Use os botes da T7 para controlar o volume, em vez dos controlos de volume do dispositivo fonte do udio. Aumente o volume do dispositivo fonte de udio apenas se o volume mximo da T7 no for suficiente.

Nota: A T7 activa sempre automaticamente a sua entrada Bluetooth se receber uma transmisso de udio de um dispositivo Bluetooth que transmita udio.

6. Modo de funcionamento da T7

Aps ter sido emparelhada com um dispositivo Bluetooth ou ligada a uma fonte de udio analgica com fios, o funcionamento da T7 simples.

Para aumentar ou reduzir o volume, prima os botes Volume + ou Volume , respectivamente.

Para reproduzir, ou colocar a reproduo de udio transmitido por Bluetooth em pausa, use o boto Reproduzir/Pausa da T7. Para avanar para a faixa seguinte, prima rapidamente o boto Reproduzir/ Pausa duas vezes. Para recuar para a faixa anterior, prima rapidamente o boto Reproduzir/Pausa trs vezes.

Nota: O boto Reproduzir/Pausa no controla o udio recebido atravs da entrada auxiliar da T7.

Para ligar o dispositivo primrio de udio Bluetooth, prima o boto Bluetooth.

Para desligar a T7 do dispositivo Bluetooth actual, prima rapidamente o boto Bluetooth duas vezes. Se estiverem ligados dois dispositivos Bluetooth T7, ambos os dispositivos sero desligados. A T7 emite um sinal sonoro ao desligar o dispositivo Bluetooth e ao ligar a entrada auxiliar.

Para seleccionar a entrada analgica com fios da T7, introduza a ficha de ligao do dispositivo ou desactive a ligao Bluetooth.

Para verificar o estado da bateria da T7, prima o boto Power.

Para desligar a T7, prima e mantenha o boto Power.

7. Indicadores e sinais sonoros da T7

A piscar a azul T7 no modo detectvel

Fixo a azul T7 emparelhada com sucesso com um dispositivo Bluetooth

A piscar a azul (piscar rpido)

Falha no emparelhamento

Os LEDs na parte lateral do produto fornecem uma indicao sobre a durao da bateria, conforme descrito no Diagrama 4. Ouvem-se sinais sonoros nas seguintes aces:

Ligar Desligar Entrada no modo de Bluetooth detectvel Dispositivo Bluetooth ligado Dispositivo Bluetooth desligado Incio de carregamento da bateria Bateria com pouca carga Bateria com muito pouca carga

Nota: possvel activar e desactivar os sinais sonoros premindo e libertando os botes "Reproduzir/Pausa" e "+".

8. Actualizao do firmware da T7

De vez em quando, pode ser disponibilizado para transferncia firmware para a T7, na seco de suporte tcnico do website da Bowers & Wilkins.

9. Reiniciar

Para reiniciar, use um clip aberto para premir e manter premido o boto embutido de reincio (Reboot) durante dois segundos. A T7 desliga-se; prima o boto Power para que o reincio fique concludo.

Nota: O reincio no limpa a memria do dispositivo emparelhado.

10. Limpeza da T7

Limpe as superfcies com um pano seco, limpo e que no largue plos.

11. Resoluo de problemas

Se necessitar de ajuda para resolver problemas especficos, ou se tiver alguma questo que gostava de nos colocar, consulte a seco de suporte tcnico da T7 no website da Bowers & Wilkins: www.bowers-wilkins.com

31

P O

R T

U G

U

SEspecificaes tcnicas

Modelo T7

Descrio Coluna porttil sem fios

Caractersticas tcnicas Bluetooth

Processamento de sinal digital (DSP)

Amplificadores de alta qualidade Classe D

Bateira recarregvel de ies de ltio

Unidades de controlo Gama total 2 x 50 mm (2,0 pol.)

2 radiadores auxiliares de graves (ABR)

Resposta de frequncia 58 Hz - 19 kHz +/-3 dB

Gama de frequncias -6 dB a 50 Hz at 21 kHz

Sada de potncia do amplificador 2 x 12 W

Tenso da alimentao Entrada: 100-240 V CA, 50/60 Hz, 1,0 A, (carregador)

Sada: 15 V CC, 2,0 A

Consumo de energia Standby: 0,141 W

Suspenso: 0,317 W

Temperatura de funcionamento Este produto foi concebido para funcionar a uma temperatura ambiente

de at 45 C.

Entradas Auxiliar - analgica (ficha estreo de 3,5 mm)

Servio - apenas actualizaes de firmware (micro-USB)

Altura 114 mm

Largura 210 mm

Profundidade 54 mm

Peso lquido 940 g

Caixa Policarbonato

Versione Firmware 1.00 Il funzionamento pu variare con versioni differenti del firmware

32

IT A

L IA

N O

www.bowers-wilkins.com

Benvenuto e grazie per aver scelto Bowers & Wilkins. Quando John Bowers fond la nostra societ, era convinto che design attraente, capacit dinnovare e tecnologie allavanguardia fossero i fattori vincenti per la riproduzione audio domestica. Le sue idee sono ancor oggi condivise da noi tutti e fonte dispirazione per ogni nuovo modello che progettiamo.

Il T7 pu essere utilizzato per: Riprodurre musica inviata in streaming da uno smartphone,

tablet o computer tramite la tecnologia senza fili Bluetooth. Riprodurre musica da un qualsiasi dispositivo dotato di uscita

analogica audio e collegato tramite cavo. Il T7 viene alimentato da una batteria ricaricabile agli ioni di litio, in grado, quando completamente carica, di assicurare fino a 18 ore di funzionamento a normali livelli dascolto.

Questo manuale illustra tutto ci che necessario conoscere per ottenere il massimo dal vostro T7, ed inizia con la descrizione del contenuto della confezione.

Nota: Prima di utilizzare il T7 assicuratevi di aver letto e compreso le istruzioni di sicurezza che accompagnano il prodotto.

ITALIANO

Contents

ITALIANO 2 1. Contenuto della confezione 3

2. Descrizione 3

3. Carica della batteria 4

4. Accensione e spegnimento 4

5. Ingressi audio 5

5.1 Connessione Bluetooth 5

5.2 Collegamento via cavo 6

6. Funzionamento 6

7. Indicatori e segnalazioni acustiche 6

8. Aggiornamento firmware 6

9. Riavvio 6

10. Pulizia 6

11. Risoluzione dei problemi 6

Caratteristiche tecniche 7

33

IT A

L IA

N O

1. Contenuto della confezione

Diffusore T7 Alimentatore T7 Adattatori spina elettrica Documentazione

Informazioni per lambiente Questo prodotto realizzato in conformit alle normative internazionali sulla limitazione delle sostanze pericolose (RoHS) come pure sulla registrazione, valutazione, autorizzazione e limitazione delle sostanze chimiche (REACH) e sullo smaltimento delle apparecchiature elettriche ed elettroniche (WEEE). Fare riferimento alle indicazioni dell'autorit del vostro Paese per il corretto riciclo o smaltimento del prodotto.

Nota: Il T7 non impermeabile e non destinato alluso in ambienti ad alta concentrazione di umidit, come bagni, piscine o saune.

2. Descrizione

T7 un diffusore Hi-Fi progettato per la massima portabilit. Una volta acceso tramite lapposito tasto sul lato destro pu essere comandato tramite i tasti Bluetooth, Riproduzione/Pausa, Volume + e Volume  presenti sul lato superiore. Un led blu a fianco del tasto Bluetooth segnala lo stato della connessione Bluetooth, mentre una colonna di led bianchi sopra il tasto daccensione mostra il livello di carica della batteria. Il T7 emette anche segnali acustici in risposta ad alcuni comandi oppure al verificarsi di determinate condizioni.

Le connessioni sul retro comprendono una presa dalimentazione, un ingresso audio analogico ausiliario (mini-jack 3,5 mm stereo) ed una presa di servizio (micro USB) da utilizzarsi esclusivamente per aggiornamenti firmware. Un piccolo foro consente poi di accedere al tasto interno di riavvio.

Figura 1 Tasti e prese di collegamento

Abbinamento Bluetooth

Riproduzione/ Pausa

Abbassare il volume

Aumentare il volume

Acceso/Spento/ Controllo batterie

Ingresso analogico ausiliario

Presa di servizio (solo per aggiornamenti firmware)

RiavvioAlimen- tazione

34

IT A

L IA

N O

Figura 4 Indicatore stato di carica della batteria

3. Carica della batteria

La batteria del T7 parzialmente carica al momento in cui lo si estrae dalla confezione. Per caricarla del tutto, seguire la procedura descritta qui sotto.

Scegliere ladattatore con la spina corrispondente al tipo di presa elettrica in uso nella vostra zona ed inserirla nellalimentatore del T7 come illustrato in Figura 2.

Inserire lalimentatore nella presa elettrica a muro e collegare il cavo allingresso alimentazione del T7 come illustrato in Figura 3. Nel caso la presa elettrica fosse dotata di un interruttore di sicurezza, accertarsi che sia in posizione di acceso.

Una volta collegato il T7 allalimentazione la batteria inizia a caricarsi. Una carica completa, a partire da condizioni di batteria completamente scarica, richiede allincirca 4 ore. Allinizio buona norma lasciare il T7 collegato allalimentazione fino alla carica completa della batteria, ma possibile utilizzarlo mentre in carica.

Premendo brevemente il tasto daccensione la colonna di cinque led sul lato destro del T7 si illuminer per qualche secondo per visualizzare lo stato di carica della batteria come illustrato in Figura 4.

Nota: possibile ricaricare la batteria del T7 in ogni momento, indipendentemente dal livello residuo.

4. Accensione e spegnimento

Per accendere e spegnere il T7 premere e mantenere premuto lapposito tasto sul lato destro per 2 secondi. Una segnalazione acustica conferma laccensione o lo spegnimento.

Nota: Se il T7 rimane inutilizzato per pi di 10 minuti entra automaticamente in modalit sleep. Per riattivarlo, inviare un flusso dati Bluetooth da un dispositivo abbinato oppure premere il tasto daccensione o quello Bluetooth. Se il T7 rimane inutilizzato per pi di 20 minuti si spegne automaticamente.

Se il T7 non mai stato utilizzato in precedenza oppure non si trova nel raggio dazione di un dispositivo Bluetooth gi abbinato, allatto dellaccensione diviene operativo il solo ingresso ausiliario. Per maggiori informazioni sul collegamento di dispositivi Bluetooth si veda la pagina successiva.

Figura 3 Collegamento del T7 alla presa elettrica

Figura 2 Inserimento della spina elettrica adatta

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

35

IT A

L IA

N O

Figura 5 Configurazione Bluetooth

5. Ingressi audio

Il T7 in grado di riprodurre file audio in modalit senza fili da un dispositivo dotato di Bluetooth o da un apparecchio con uscita analogica collegato tramite cavo allingresso ausiliario.

La selezione tra Bluetooth ed ingresso ausiliario automatica, con priorit per il Bluetooth. La selezione dellingresso avviene secondo le seguenti regole:

Se il T7 collegato tramite Bluetooth e si inserisce uno spinotto nella presa dellingresso ausiliario, viene selezionato l'ingresso ausiliario.

Se il T7 in riproduzione audio attraverso il suo ingresso ausiliario e viene ricevuto un flusso dati Bluetooth o premuto il pulsante Bluetooth, viene selezionato l'ingresso Bluetooth.

Se il T7 in riproduzione audio attraverso il suo ingresso ausiliario e si scollega il cavo, viene selezionato l'ingresso Bluetooth tentando di connettersi al dispositivo abbinato come primario.

Nota: Se il T7 connesso ad un dispositivo Bluetooth e contemporaneamente anche collegato un cavo allingresso ausiliario, linvio di un segnale audio analogico non provoca la selezione automatica dellingresso ausiliario.

5.1 Connessione Bluetooth

Per collegare il T7 a un dispositivo audio Bluetooth necessario prima "abbinare" il dispositivo stesso. Una volta abbinati, sia il dispositivo Bluetooth, sia il T7 si "ricorderanno" l'uno dell'altro cos da essere in grado di riconnettersi rientrando nel raggio d'azione.

Il T7 pu memorizzare fino a otto dispositivi Bluetooth abbinati. Il primo dispositivo abbinato verr designato come dispositivo "primario", i successivi come "secondari".

Il dispositivo primario viene connesso automaticamente quando, trovandosi nel raggio d'azione, si preme il tasto Bluetooth del T7. I dispositivi secondari non si connettono automaticamente, ma devono essere di volta in volta collegati tramite le rispettive impostazioni Bluetooth.

possibile per due dispositivi abbinati essere connessi contemporaneamente al T7. Tuttavia verr riprodotto l'audio di uno solo di essi. Quando sono connessi due dispositivi, il flusso dati di uno pu prevalere su quello dell'altro.

Per abbinare un dispositivo Bluetooth al T7 seguire i passi descritti qui sotto.

Con il T7 acceso, premere e mantenere premuto il tasto Bluetooth per 2 secondi. Il led blu lampeggia ed il T7 emette un segnale acustico entrando in modalit "abbinamento".

Nota: Il T7 esce automaticamente dalla modalit di abbinamento Bluetooth se nessun dispositivo viene abbinato entro 5 minuti.

2 secondi

Devices Bowers & Wilkins T7

36

IT A

L IA

N O

Aprire le impostazioni Bluetooth sul dispositivo che si desidera abbinare e verificare che il Bluetooth sia attivo. Una volta individuato, il T7 comparir nell'elenco dei dispositivi disponibili con la denominazione Bowers & Wilkins T7. Selezionarlo e chiudere le impostazioni Bluetooth. Il led Bluetooth sul T7 lampeggia segnalando labbinamento in corso e si illumina completamente una volta conclusa l'operazione e stabilita la connessione. Contemporaneamente viene emesso un segnale acustico.

Nota: Se il dispositivo Bluetooth non consentisse labbinamento diretto e dovesse richiedere un codice di quattro cifre, immettere '0000'.

Una volta stabilita la connessione, assicurarsi che il T7 sia selezionato come uscita altoparlante. ora possibile riprodurre file audio tramite il T7.

I dispositivi abbinati possono essere cancellati dalla memoria premendo e mantenendo premuti per 2 secondi i tasti Volume e Bluetooth. Il led Bluetooth lampeggia ed il T7 si riavvier una volta cancellata la memoria.

Per disconnettere un dispositivo Bluetooth dal T7 premere il tasto Bluetooth per due volte in rapida successione. Ci scollegher tutti i dispositivi Bluetooth connessi. Il T7 emette un segnale acustico quando il Bluetooth viene disattivato.

5.2 Collegamento via cavo

Collegare una sorgente audio analogica all'ingresso ausiliario utilizzando un idoneo cavo. Inserendo uno spinotto nella presa il T7 seleziona automaticamente lingresso ausiliario. Se la sorgente possiede un controllo del volume duscita, regolarlo inizialmente circa a met. Utilizzare i tasti del T7 per ritoccare il volume piuttosto che il controllo della sorgente. Incrementare il volume duscita della sorgente solo nel caso il volume massimo del T7 dovesse apparire insufficiente.

Nota: Il T7 seleziona sempre automaticamente lingresso Bluetooth se viene ricevuto un flusso dati audio da un dispositivo Bluetooth connesso.

6. Funzionamento

Una volta abbinato il T7 ad un dispositivo Bluetooth o collegato tramite cavo ad una sorgente audio analogica, il suo funzionamento molto semplice.

Per aumentare o diminuire il volume agire rispettivamente sui tasti Volume + o Volume -.

Per riprodurre o mettere in pausa il flusso dati Bluetooth utilizzare il tasto Riproduzione/Pausa. Per passare al brano successivo, premere lo stesso tasto due volte in rapida successione. Per tornare a quello precedente, premere sempre il tasto Riproduzione/Pausa tre volte in rapida successione.

Nota: Il tasto Riproduzione/Pausa non agisce sul segnale proveniente da una sorgente audio collegata allingresso ausiliario.

Per connettersi al dispositivo Bluetooth primario premere il tasto Bluetooth.

Per scollegarsi dal dispositivo Bluetooth attualmente connesso premere il tasto Bluetooth due volte in rapida successione. Se al T7 sono connessi due dispositivi Bluetooth, verranno scollegati entrambi. Il T7 emetter un segnale acustico quando il Bluetooth viene disattivato e l'ingresso ausiliario selezionato.

Per selezionare l'ingresso ausiliario, inserire uno spinotto nella presa o scollegarsi dal dispositivo Bluetooth.

Per controllare lo stato di carica della batteria, premere brevemente il tasto daccensione.

Per spegnere il T7 premere e mantenere premuto per 2 secondi il tasto daccensione.

7. Indicatori e segnalazioni acustiche

Blu con lampeggio lento

Modalit ricerca dispositivi

Blu stabile Abbinamento ad un dispositivo Bluetooth eseguito con successo

Blu con lampeggio veloce

Abbinamento fallito

La colonna di cinque led sul lato destro dellapparecchio mostra il livello di carica della batteria come illustrato in Figura 4.

Un segnale acustico viene emesso in conseguenza delle seguenti azioni:

Accensione Spegnimento Modalit ricerca dispositivi Bluetooth Dispositivo Bluetooth connesso Dispositivo Bluetooth disconnesso Avvio ricarica batteria Livello di carica della batteria basso Livello di carica della batteria critico

Nota: possibile attivare/disattivare le segnalazioni acustiche premendo brevemente assieme i tasti Riproduzione/Pausa e Volume +.

8. Aggiornamento firmware

Aggiornamenti firmware possono di tanto in tanto rendersi disponibili per il download nella sezione Supporto dedicata al T7 del sito web Bowers & Wilkins.

9. Riavvio

Per eseguire un riavvio dellapparecchio, premere e mantenere premuto per 2 secondi lapposito tasto interno accessibile con una graffetta aperta tramite il piccolo foro presente sul retro. Il T7 si spegne. Riaccenderlo premendo il tasto daccensione per completare la procedura.

Nota: Eseguendo il riavvio non viene cancellata la memoria dei dispositivi Bluetooth abbinati.

10. Pulizia

Spolverare le superfici con un panno morbido asciutto.

11. Risoluzione dei problemi

In caso di necessit, per risolvere un problema specifico o ottenere risposta ad una domanda, consultare la sezione Supporto dedicata al T7 del sito web Bowers & Wilkins.

37

IT A

L IA

N O

Caratteristiche tecniche

Modello T7

Descrizione Diffusore portatile senza fili

Caratteristiche tecniche Bluetooth

Elaborazione digitale del segnale (DSP)

Amplificazione in Classe D di alta qualit

Batteria ricaricabile agli ioni di litio

Trasduttori 2 x 50 mm a gamma intera

2 x radiatori passivi per la gamma bassa (ABR)

Risposta in frequenza 58 Hz 19 kHz +/-3 dB

Gamma di frequenze -6 dB a 50 Hz e 21 kHz

Potenza amplificazione 2 x 12 W

Alimentazione (Alimentatore) Ingresso: 100 240 V AC; 50/60 Hz, 1 A

Uscita: 15 V DC, 2 A

Assorbimento Standby: 0,141 W

Sleep: 0,317 W

Temperature di funzionamento Lapparecchio progettato per funzionare ad una temperatura

ambientale fino a 45C

Ingressi Aux: analogico (mini-jack 3,5 mm stereo)

Service: solo per aggiornamenti firmware (micro USB)

Altezza 114 mm

Larghezza 210 mm

Profondit 54 mm

Peso netto 940 g

Mobile Policarbonato

Firmwareversie 1.00 De werking kan afwijken van die van andere firmwareversies

38

N E

D E

R L

A N

D S

www.bowers-wilkins.com

Welkom bij Bowers & Wilkins en T7 Dank u wel voor uw keuze voor Bowers & Wilkins. Toen John Bowers zijn bedrijf oprichtte, was hij ervan overtuigd dat hij de consument met fantasierijke ontwerpen, innovatieve engineering en geavanceerde technologie meer van audio in de thuisomgeving zou kunnen laten genieten. Wij delen deze overtuiging nog altijd; elk product dat wij ontwerpen is hierop genspireerd.

De T7 is geschikt voor het: afspelen van muziek die u met draadloze Bluetooth-

technologie van uw mobiele telefoon, tablet of computer streamt.

afspelen van muziek via een bedrade verbinding vanaf een apparaat met een analoge audio-uitgang.

Als de oplaadbare lithium-ion accu volledig is opgeladen, kan de T7 op een gemiddeld volume tot 18 uur muziek laten horen.

In deze handleiding staat alles wat u moet weten om optimaal van uw T7 te kunnen genieten. Ten eerste beschrijven we de inhoud van de verpakking.

NB: Lees alvorens de T7 te gebruiken eerst de bijgesloten veiligheidsaanwijzingen en zorg ervoor dat u deze begrijpt.

NEDERLANDS

Contents

NEDERLANDS 2 1. Inhoud verpakking T7 3

2. De T7 beter leren kennen 3

3. Accu laden 4

4. In- en uitschakelen 4

5. Audio-ingangen T7 5

5.1 Bluetooth-verbinding 5

5.2 Bedrade aansluiting 6

6. De T7 bedienen 6

7. Indicatielampjes en geluidssignalen op de T7 6

8. Firmware-update T7 6

9. Herstarten 6

10. De T7 schoonmaken 6

11. Problemen oplossen 6

Technische gegevens 7

39

N E

D E

R L

A N

D S

1. Inhoud verpakking T7

T7-luidspreker. Voeding T7 Regionale stekkers/adapters. Documentatie

Milieu-informatie Dit product voldoet aan internationale regelgeving, zoals onder andere de BGS-richtlijn inzake beperkingen op het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur, de REACH-verordening inzake de registratie en beoordeling van en de autorisatie en beperkingen ten aanzien van chemische stoffen en de AEEA-richtlijn betreffende afgedankte elektrische en elektronische apparatuur. Neem contact op met de lokale instantie die verantwoordelijk is voor afvalverwerking voor informatie over hoe u dit product op de juiste wijze kunt recyclen of afdanken.

NB: De T7 is niet waterdicht en is niet bedoeld voor gebruik in een omgeving met een hoge luchtvochtigheid zoals een badkamer, zwembad of sauna.

2. De T7 beter leren kennen

De T7 is een hifi-luidspreker die zo handzaam mogelijk is ontworpen om hem gemakkelijk te kunnen verplaatsen. Nadat hij ingeschakeld is via de AAN/UIT-knop op de rechterzijkant, wordt hij bediend via de knoppen voor Bluetooth, Afspelen/ pauzeren en Volume + en Volume op het bovenpaneel. Een blauw indicatielampje naast de Bluetooth-knop laat de status van de Bluetooth- verbinding zien en een rij witte indicatielampjes boven de AAN/UIT-knop geeft de accucapaciteit aan. De T7 laat ook geluidssignalen horen bij bepaalde commando's en acties.

De aansluitingen aan de achterkant omvatten een voedingsingang, Aux-ingang (3,5 mm stereo jack), en een serviceaansluiting die alleen gebruikt wordt voor firmware-updates (micro-USB) Het verborgen resetknopje bevindt zich ook op de achterkant van T7.

Afbeelding 1 Knoppen en aansluitpunten

Bluetooth koppelen

Afspelen/ Pauzeren

Volume lager

Volume hoger

Aan / Uit / Accuvermogen controleren

Aux Service (alleen voor firmware- updates)

HerstartenVoeding

40

N E

D E

R L

A N

D S

Afbeelding 4 Indicator voor accucapaciteit

3. Accu laden

De T7 is deels opgeladen als u hem uitpakt. Volg de onderstaande stappen om de T7 helemaal te laden.

Selecteer de juiste stekkeradapter voor uw stopcontact en klik hem op de voeding zoals in afbeelding 2 wordt getoond.

Steek nu de voeding van de T7, met de juiste stekkeradapter, in het stopcontact en sluit het andere uiteinde van het netsnoer op de voedingsingang van de T7 aan. Dit wordt in afbeelding 3 getoond. Als het stopcontact een aan-/uitschakelaar heeft, schakel deze dan in.

Zodra de T7 op de stroom is aangesloten, wordt de accu geladen. Als de accu helemaal leeg is, kost het zo'n vier uur om hem weer volledig te laden. U kunt de T7 in eerste instantie het beste op de netstroom aangesloten laten tot de accu volledig is geladen. U kunt hem in de tussentijd wel gewoon gebruiken; het laden gaat dan gewoon door.

Als u de Power-knop kort indrukt en weer loslaat, gaan de vijf indicatielampjes aan de rechterkant van de T7 even branden om de resterende accucapaciteit aan te geven. Het aantal lampjes dat gaat branden geeft aan hoe vol de accu nog is; zie afbeelding 4.

NB: U kunt de T7 altijd opladen, ongeacht hoeveel capaciteit de accu nog heeft.

4. In- en uitschakelen

U kunt de T7 in- of uit schakelen door de Power- knop twee seconden ingedrukt te houden. Zodra de T7 wordt ingeschakeld, klinkt er een geluidssignaal.

NB: Als de T7 langer dan 10 minuten niet wordt gebruikt, schakelt hij vanzelf over naar de slaapstand. Laat de T7 ontwaken door een Bluetooth-audiostream vanaf een gekoppeld apparaat te starten. De T7 ontwaakt ook uit de slaapstand als de Bluetooth-knop of de power-knop wordt ingedrukt. Als de T7 langer dan 20 minuten niet wordt gebruikt, schakelt hij vanzelf uit.

Als de T7 nog niet eerder is gebruikt of zich bij inschakelen niet binnen het bereik van eerder aangesloten Bluetooth-apparaten bevindt, is alleen de Aux-ingang actief. In het volgende hoofdstuk van deze handleiding vindt u informatie over het aansluiten van Bluetooth-apparaten.

Afbeelding 3 De T7 op de netstroom aansluiten

Afbeelding 2 De juiste adapter kiezen

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

41

N E

D E

R L

A N

D S

Afbeelding 5 Bluetooth-apparaten koppelen

5. Audio-ingangen T7

De T7 kan draadloos muziek van een compatibel Bluetooth-apparaat afspelen of via een bedrade verbinding vanaf een apparaat met een analoge uitgang.

De T7 selecteert zelf tussen zijn Bluetooth- en bedrade ingangen, maar de Bluetooth-ingang heeft voorrang. De volgende regels gelden hierbij:

Als de T7 via Bluetooth wordt verbonden en er een stekker in de Aux-ingang wordt gestoken, schakelt de T7 over naar Aux.

Als er een Bluetooth-stream wordt ontvangen of de Bluetooth-knop wordt ingedrukt terwijl de T7 muziek via de Aux-ingang afspeelt, schakelt de T7 over naar de Bluetooth-ingang.

Als de kabel wordt uitgetrokken terwijl de T7 muziek via de Aux-ingang afspeelt, schakelt de T7 over naar de Bluetooth-ingang en probeert hij de verbinding met het primaire gekoppelde bronapparaat tot stand te brengen.

NB: Als de T7 via Bluetooth is verbonden terwijl er ook een kabel op de Aux-ingang is aangesloten, schakelt de T7 bij een nieuw analoog audiosignaal niet vanzelf op de Aux- ingang over.

5.1 Bluetooth-verbinding

Om de T7 met een bronapparaat via Bluetooth te verbinden, moet hij eerst met dat apparaat gekoppeld worden. Na het koppelen onthouden het Bluetooth-apparaat en de T7 elkaar en kunnen ze verbinding met elkaar maken als ze binnen elkaars bereik zijn.

De T7 onthoudt maximaal acht gekoppelde Bluetooth-apparaten. Het eerste gekoppelde apparaat wordt aangegeven als het primaire apparaat; extra apparaten worden aangegeven als secundaire apparaten.

De verbinding met het primaire apparaat wordt gemaakt als dit binnen bereik is en de Bluetooth- knop op de T7 wordt ingedrukt. Secundaire apparaten maken niet vanzelf verbinding als ze binnen bereik zijn, maar moeten via hun Bluetooth- instellingen worden verbonden.

Het is mogelijk twee gekoppelde apparaten met de T7 te verbinden. Er is echter alleen maar geluid vanaf n apparaat tegelijk te horen. Als er twee apparaten verbonden zijn, kan het andere apparaat de actieve stream onderdrukken.

Ga als volgt te werk om een Bluetooth-apparaat met de T7 te koppelen.

Druk, terwijl de T7 is ingeschakeld, de Bluetooth- knop in en houd deze twee seconden ingedrukt. Het indicatielampje gaat knipperen en de T7 laat een geluidssignaal horen als hij in de koppelstand schakelt.

NB: De T7 verlaat de Bluetooth-koppelstand vanzelf als er niet binnen vijf minuten een apparaat gekoppeld is.

2 seconden

Devices Bowers & Wilkins T7

42

N E

D E

R L

A N

D S

Open de Bluetooth-instellingen op het bronapparaat en controleer of Bluetooth is ingeschakeld. Zodra hij ontdekt is, verschijnt de T7 van Bowers & Wilkins als een beschikbaar Bluetooth-apparaat. Selecteer de T7 en sluit de Bluetooth-instellingen. Het Bluetooth- indicatielampje op de T7 knippert tijdens het koppelen en brandt constant als de koppeling geslaagd is. Als de koppeling tot stand komt, geeft de T7 ook een hoorbaar signaal.

NB: Als met uw Bluetooth-apparaat dat u als muziekbron wilt gebruiken gewoon koppelen niet mogelijk is en u een pincode moet invoeren, voer dan '0000' in.

Vergeet niet om, zodra er een verbinding tot stand is gebracht, de T7 als luidsprekeruitgang te selecteren. U hoort het geluid nu via de T7.

Het geheugen met gekoppelde apparaten kan worden gewist door de knop Volume en de Bluetooth-knop twee seconden ingedrukt te houden. Het Bluetooth-indicatielampje gaat knipperen en de T7 wordt opnieuw gestart zodra het geheugen gewist is.

Om de verbinding met een Bluetooth-bronapparaat te verbreken, drukt u twee keer snel na elkaar op de Bluetooth-knop op de T7. Alle koppelingen met Bluetooth-apparaten worden hiermee verbroken. Als de Bluetooth-verbinding wordt verbroken, geeft de T7 een hoorbaar signaal.

5.2 Bedrade aansluiting

Gebruik een geschikte aansluitkabel voor de Aux- ingang. De T7 selecteert vanzelf zijn Aux-ingang als er een stekker op wordt aangesloten. Als de analoge geluidsbron een uitgangsvolumeregeling heeft, dan moet die in eerste instantie op ongeveer half volume worden ingesteld. Regel het volume met de knoppen op de T7 in plaats van met de volumeknoppen op het bronapparaat. Verhoog het bronvolume alleen maar als het maximumvolume van de T7 niet voldoende is.

NB: De T7 schakelt automatisch op zijn Bluetooth-ingang over als er een audiostream van een aangesloten Bluetooth-bronapparaat wordt ontvangen.

6. De T7 bedienen

Na het koppelen met een Bluetooth-bron of het aansluiten op een bedrade analoge geluidsbron is de T7 verder gemakkelijk te bedienen.

U kunt het volume hoger of later stellen met de knoppen Volume + en Volume -.

Met de knop voor afspelen/pauzeren op de T7 kunt u via Bluetooth gestreamde muziek afspelen en pauzeren. U kunt naar het volgende nummer springen door twee keer snel na elkaar op de knop voor afspelen/pauzeren te drukken. U kunt naar het vorige nummer terugspringen door drie keer snel na elkaar op de knop voor afspelen/pauzeren te drukken.

NB: Met de knop voor afspelen/pauzeren kunt u het afspelen van muziek via de Aux-ingang van de T7 niet regelen.

Druk op de Bluetooth-knop om verbinding te maken met de primaire Bluetooth-bron.

Om de verbinding met het actueel verbonden Bluetooth-bronapparaat te verbreken, drukt u twee keer snel na elkaar op de Bluetooth-knop op de T7. Als er twee Bluetooth-apparaten met de T7 zijn verbonden, wordt de verbinding met beide apparaten verbroken. De T7 laat een geluidssignaal horen als de Bluetooth-verbinding is verbroken en schakelt over naar de Aux-ingang.

U kunt de analoge bedrade ingang van de T7 selecteren door een stekker in de ingang te steken of de verbinding met het verbonden Bluetooth- apparaat te verbreken.

U kunt de accucapaciteit van de T7 controleren door op de Power-knop te drukken.

U kunt de T7 uitschakelen door de Power-knop ingedrukt te houden.

7. Indicatielampjes en geluidssignalen op de T7

Langzaam blauw knipperend

De T7 kan ontdekt worden

Constant blauw

De T7 is met een Bluetooth- apparaat gekoppeld

Snel blauw knipperend

Het koppelen is mislukt

De led's aan de zijkant van het product geven de accucapaciteit aan; zie afbeelding 4.

Er zijn geluidssignalen te horen voor de volgende handelingen:

Stroom aan Stroom uit Bluetooth-ontdekkingsstand ingeschakeld Bluetooth-apparaat verbonden Verbindingen met Bluetooth-apparaten verbroken Accu opladen gestart Accucapaciteit laag Accucapaciteit kritiek

NB: U kunt de geluidssignalen in- en uitschakelen door de knop voor afspelen/pauzeren' en de +-knop in te drukken en weer los te laten.

8. Firmware-update T7

Af en toe komen er firmware-updates voor de T7 uit. U kunt deze downloaden in de rubriek voor T7- ondersteuning op de website van Bowers & Wilkins.

9. Herstarten

Druk voor het herstarten de Reboot-knop twee seconden lang met een rechtgebogen paperclip in. De T7 schakelt zichzelf uit. Druk nu op Power om het herstarten te voltooien.

NB: door een herstart wordt het geheugen met gekoppelde apparaten niet gewist.

10. De T7 schoonmaken

Veeg de oppervlakken met een droge, pluisvrije doek schoon.

11. Problemen oplossen

Als u een vraag hebt of hulp nodig hebt bij het oplossen van een specifiek probleem, raadpleeg dan de rubriek voor ondersteuning voor de T7 op de website van Bowers & Wilkins: www.bowers- wilkins.nl

43

N E

D E

R L

A N

D S

Technische gegevens

Model T7

Beschrijving Draadloze draagbare luidspreker

Technische kenmerken Bluetooth

Digitale signaalverwerking (DSP) Digital Signal Processing (DSP)

Hoogwaardige klasse D-versterkers

Oplaadbare lithium-ion accu

Drivers 2x 50 mm, volledig bereik

2 x Auxiliary Bass Radiators (ABR) 2 x Auxiliary Bass Radiators (ABR)

Frequentierespons 58 Hz 19 kHz +/-3 dB

Frequentiebereik -6 dB bij 50 Hz tot 21 kHz

Versterkervermogen 2 x 12 W

Voedingsspanning Ingangsvermogen: 100 240 Vac, 50/60 Hz, 1,0 A, (voeding)

Uitgangsvermogen: 15 Vdc, 2,0 A

Stroomverbruik Stand-by: 0,141 W

In slaapstand: 0,317 W

Bedrijfstemperatuur Dit product is ontworpen voor een omgevingstemperatuur van

max. 45C

Ingangen Aux analoog (3,5 mm stereo jack)

Service alleen firmware-updates (micro-USB)

Hoogte 114 mm

Breedte 210 mm

Diepte 54 mm

Nettogewicht 940 g

Kast Polycarbonaat

1.00

44

www.bowers-wilkins.com

Bowers & Wilkins T7 Bowers & Wilkins. John Bowers , , . .

7 : ,

tablet Bluetooth.

.

7 , 18 , .

7. 7.

: 7, .

2 1. 7 3

2. 7 3

3. 4

4. 4

5. 7 5

5.1 Bluetooth 5

5.2 6

6. 7 6

7. 7 6

8. 7 6

9. 6

10. 7 6

11. 6

7

45

1. 7

T7. T7. . .

, , , Restriction of Hazardous Substances (RoHS - ) , Registration, Evaluation, Authorisation and restriction of CHemicals (REACH - , , ) Waste Electrical and Electronic Equipment (WEEE - ). .

: 7 , , .

2. 7

7 Hi-Fi . , Bluetooth, / , . Bluetooth Bluetooth . 7 .

T7 , ( 3,5 mm) (micro USB). 7 .

1

Bluetooth

- /

/ /

( - )

-

-

46

4

3.

7 . 7, .

, 2.

7 7. 3. , .

7 , . 4 . 7 , .

, 7 . ,  4.

: 7 , .

4.

7, 2 . 7 .

: 7 10 , . 7 Bluetooth . 7 Bluetooth . 7 20 , .

7 Bluetooth , . Bluetooth, .

3 T7

2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

47

5 Bluetooth

5. 7

7 Bluetooth .

7 Bluetooth , Bluetooth . :

7 Bluetooth , 7 .

7 Bluetooth Bluetooth, 7 Bluetooth.

7 , 7 Bluetooth .

: 7 Bluetooth , 7 .

5.1 Bluetooth

7 Bluetooth, "" . , Bluetooth 7 .

7 Bluetooth. "" , "" .

Bluetooth 7. , Bluetooth .

7 . , . , .

Bluetooth 7, .

7 , Bluetooth 2 . 7 .

: 7 Bluetooth 5 .

2

Devices Bowers & Wilkins T7

48

Bluetooth Bluetooth . , Bowers & Wilkins T7 Bluetooth. T7 Bluetooth. Bluetooth 7 . 7 .

: Bluetooth , "0000".

, 7 . 7.

Bluetooth 2 . Bluetooth 7 .

Bluetooth 7, Bluetooth 7. Bluetooth. 7 Bluetooth.

5.2

. 7 . , . 7 . 7 .

: 7 Bluetooth Bluetooth.

6. 7

Bluetooth , 7 .

, .

Bluetooth, / 7. , / . , /.

: / 7.

Bluetooth, Bluetooth.

Bluetooth, Bluetooth. 7 Bluetooth, . 7 Bluetooth .

7, Bluetooth.

7, .

7, .

7. 7

7

7 Bluetooth

()

LED , 4.

:

Bluetooth Bluetooth Bluetooth

: / "+".

8. 7

, 7 7 Bowers & Wilkins.

9.

, . 7 , .

: .

10. 7

.

11.

, 7 Bowers & Wilkins. www.bowers-wilkins.com

49

T7

Bluetooth

(DSP)

D

2 x 50 mm

2 x (ABR)

58 Hz 19 kHz +/-3 dB

-6 dB 50 Hz 21 kHz

2 x 12 W

: 100 - 240 Vac, 50/60 Hz, 1,0 A ()

: 15 Vdc, 2,0 A

: 0,141 W

: 0,317 W

45 C

- ( 3,5 mm)

- (micro USB)

114 mm

210 mm

54 mm

940 g

1.00

50

www.bowers-wilkins.com

Bowers & Wilkins T7 Bowers & Wilkins.

, ,

, ,

,

. ,

.

T7 :

,

Bluetooth.

,

.

T7 - ,

18

.

,

, T7.

T7.

: T7, ,

, .

Contents

2 1. T7 3

2. T7 3

3. 4

4. 4

5. T7 5

5.1 Bluetooth 5

5.2 6

6. T7 6

7. T7 6

8. T7 6

9. Reboot 6

10. T7 6

11. 6

7

51

1. T7

T7. T7.

.

, , , (RoHS) , , , (REACH), (WEEE). .

: T7 , , , .

2. T7

T7 Hi-Fi , . Power , Bluetooth, Play/Pause, Volume + Volume . Bluetooth Bluetooth, Power . , T7 .

T7 , AUX (3.5- -), , (micro-USB). Reboot () T7.

Diagram 1 .

Bluetooth

Play/Pause Volume down Volume up

On / Off / Check Battery Auxiliary Service ( )

RebootPower

52

Diagram 4

3.

T7 , . T7 .

, Diagram 2.

T7 T7. Diagram 3. , .

T7 , . ( ) 4 . T7 , , .

Power , T7 . diagram 4.

: T7 , .

4.

T7, Power 2 . T7 .

: T7 10 , . T7 Bluetooth . T7 Bluetooth . T7 20 , .

T7 , Bluetooth , AUX . Bluetooth .

Diagram 3 T7

Diagram 2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

53

Diagram 5 Bluetooth

5. T7

T7 , Bluetooth- , .

T7 Bluetooth , Bluetooth . :

T7 Bluetooth, AUX, T7 AUX.

T7 AUX Bluetooth Bluetooth, T7 Bluetooth.

T7 AUX , T7 Bluetooth .

: T7 Bluetooth AUX , T7 AUX.

5.1 Bluetooth

T7 Bluetooth , (paired). Bluetooth T7 , .

T7 Bluetooth . , .

, Bluetooth T7. , Bluetooth .

T7 . . , .

Bluetooth T7 , .

T7, Bluetooth 2 . T7 , .

: T7 Bluetooth, 5 .

2

Devices Bowers & Wilkins T7

54

Bluetooth , Bluetooth . , Bowers & Wilkins T7 Bluetooth. T7 Bluetooth. Bluetooth T7 , . T7 , .

: Bluetooth 4- , 0000.

, , T7 . T7.

, Volume Bluetooth 2 . Bluetooth T7 .

Bluetooth T7, Bluetooth T7. Bluetooth . T7 , Bluetooth .

5.2

Aux . T7 Aux . , . T7 , . , T7 .

: T7 Bluetooth Bluetooth .

6. T7

T7 Bluetooth , .

, Volume + Volume .

Bluetooth Play/Pause T7. Play/Pause. Play/Pause.

: Play/Pause AUX.

Bluetooth , Bluetooth.

Bluetooth , Bluetooth. Bluetooth T7, . T7 Bluetooth AUX.

T7, Bluetooth .

T7 Power.

T7 Power.

7. T7

T7

T7 Bluetooth

( )

T7 Diagram 4.

Bluetooth Bluetooth Bluetooth

: , Play/Pause + .

8. T7

T7 T7 Bowers & Wilkins.

9. Reboot

T7 , Reboot 2 . T7 , Power .

: .

10. T7

.

11.

- , , , T7 Bowers & Wilkins: www.bowers- wilkins.com

55

T7

Bluetooth

(DSP)

D

-

2x 50 (2.0 in)

2 x (ABR)

58 -19 , +/-3

50 21 , 6

2 x 12

: 100-240, 50/60, 1.0A, ( )

: 15 . , 2.0A

Standby: 0.141

Sleep: 0.317

45C

AUX - ( 3.5- )

(micro USB)

114

210

54

, 940

Verze firmware 1.00 U jinch verz firmware se mohou funkce liit

56

E

S K

Y

www.bowers-wilkins.com

Vtejte u Bowers & Wilkins Dkujeme Vm, e jste si zvolili znaku Bowers & Wilkins. Kdy John Bowers zakldal na firmu, vil, e npadit proveden, novtorsk pstup a pokroil technologie jsou klem otevrajcm dvee ke kvalitn reprodukci. Touto filozofi se dodnes inspirujeme, kdykoli tvome nov produkt.

T7 lze vyut pro: Pehrvn hudby streamovan pomoc bezdrtov

technologie Bluetooth z vaeho mobilnho telefonu, tabletu i potae

Pehrvn hudby z rznch dalch zazen pomoc analogovho kabelovho propojen

T7 je napjen lithio-iontovm akumultorem, jen po plnm dobit vydr pi prmrn hlasitosti a 18 hodin provozu.

Tento manul vm poskytne vechny informace potebn k tomu, abyste z pstroje T7 vytili maximum. Zanme popisem obsahu balen.

Poznmka: Ne zanete T7 pouvat, mli byste se seznmit s bezpenostnmi instrukcemi, kter jsou soust balen vrobku.

ESKY

Contents

ESKY 2 1. Balen T7 obsahuje 3

2. Seznamme se s T7 3

3. Dobjen akumultoru 4

4. Zapnn a vypnn 4

5. Audio vstupy T7 5

5.1 Bluetooth pipojen 5

5.2 Kabelov propojen 6

6. Obsluha T7 6

7. T7 indiktory a zvukov znamen 6

8. Aktualizace firmware T7 6

9. Restart 6

10. itn T7 6

11. een problm 6

Technick specifikace 7

57

E

S K

Y

1. Balen T7 obsahuje

T7 reprosystm. T7 napjec zdroj. Regionln adaptry do AC zsuvky. Balek s dokumenty

Informace k ivotnmu prosted Tento produkt je konstruovn s ohledem na nejen tyto mezinrodn pedpisy RoHS (Restriction of Hazardous Substances) jen se tk omezen nebezpench ltek v elektrickch a elektronickch zazench, REACH (Registration, Evaluation, Authorisation and restriction of CHemicals), jen se tk registrace, evaluace, autorizace a restrikce chemickch ltek a WEEE (Waste Electrical and Electronic Equipment), jen se tk likvidac elektrickho a elektronickho zazen. Vce informac o tom, jak sprvn recyklovat nebo likvidovat tento vrobek, zskte od pslunho orgnu, kter se zabv likvidac odpadu.

Poznmka: Pstroj T7 nen vododoln a nen uren k provozu ve vlhkm prosted, jako jsou napklad koupelny, bazny i sauny.

2. Seznamme se s T7

T7 je Hi-Fi reprosystm, konstruovan s ohledem na maximln penositelnost. Po jeho zapnut pomoc tlatka Power na jeho prav stran, me bt ovldn pomoc tlatek Bluetooth, Play/Pause, Volume + a Volume , jen se nachzej na jeho hornm panelu. Modr kontrolka v blzkosti tlatka Bluetooth signalizuje status Bluetooth pipojen a ada blch indiktor nad tlatkem Power signalizuje rove dobit akumultoru. Nkter funkce pstroj T7 signalizuje tak pomoc zvuk.

Terminly na zadn stran pstroje T7 zahrnuj vstup pro napjec zdroj, analogov vstup AUX (3.5mm stereo jack) a servisn terminl uren jen pro aktualizaci firmware (mikro-USB). Tak je zde mal zaputn tlatko Reboot, uren pro restartovn pstroje.

Obrzek 1 Ovldac prvky a terminly.

Provn Bluetooth Pehrvn/Pauza Hlasitost nahoru Hlasitost dol

Zapnout / Vypnout / Kontrola nabit

Vstup AUX Servisn port (jen pro Firmware)

RestartovnNapjen

58

E

S K

Y

Obrzek 4 Indiktor stavu akumultoru

3. Dobjen akumultoru

Akumultor pstroje T7 je ji z vroby sten nabit. Pro nabjen akumultoru postupujte podle ne uvedench instrukc:

Vyberte patin regionln adaptr, kter je vhodn pro vai zsuvku a nacvaknte jej na tlo napjecho zdroje, jak je znzornno na obrzku 2.

Zapojte napjec zdroj T7 do zsuvky a jeho vstupn kabel pipojte k pstroji T7. To je znzornno na obrzku 3. Je-li vae napjec zsuvka vybavena vypnaem, zapnte jej.

Jakmile je pstroj T7 zapojen k napjen, zane se dobjet jeho akumultor. Pln nabit z nulovho stavu trv zhruba 4 hodiny. Nejlep je nechat pstroj pipojen k napjen tak dlouho, ne je akumultor pln nabit. Bhem dobjen vak pstroj mete klidn pouvat.

Je-li krtce stisknuto tlatko Power, znzorn na chvli ada blch indiktor stav nabit akumultoru. Vysvtlen k vznamu tchto indiktor naleznete na obrzku 4.

Poznmka: Pstroj T7 lze dobjet kdykoli, bez ohledu na aktuln stav akumultoru.

4. Zapnn a vypnn

Pro zapnut T7 stisknte na dobu cca 2 vtein tlatko Power. Pstroj se zapne a oznm to zvukovm signlem.

Poznmka: Nen-li T7 pouvn po dobu vce ne 10 minut, pejde automaticky do spcho reimu. Z tohoto reimu se probud bu zahjenm Bluetooth streamovn ze sprovanho pstroje, nebo stiskem tlatka Bluetooth. Nen-li T7 pouvn po dobu vce ne 20 minut, automaticky se vypne.

Nebyl-li pstroj T7 jet pouit a sprovn, nebo pokud se nachz mimo dosah pedtm sprovanho Bluetooth zazen, bude fungovat pouze pro analogov vstup AUX. Pro sprovn s Bluetooth zazenm si prosm pette nsledujc st.

Obrzek 3 Pipojen T7 k napjen

Obrzek 2 Volba a vloen patinho regionlnho adaptru

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

59

E

S K

Y

Obrzek 5 Nastaven Bluetooth

5. Audio vstupy T7

T7 me pehrvat hudbu jak bezdrtov z kompatibilnho Bluetooth zazen, tak po kabelu ze zazen s analogovm vstupem.

Pstroj T7 pitom me pepnat vstupy automaticky, piem pednost m vstup Bluetooth. Pravidla pro pepnn jsou nsledujc:

Je-li T7 pipojen pes Bluetooth a do vstupu AUX zasunete konektor, pepne se T7 na vstup AUX.

Pehrv-li T7 audio pes vstup AUX a obdr pi tom Bluetooth stream, nebo je stisknuto tlatko Bluetooth, pepne se na vstup Bluetooth.

Pehrv-li T7 audio ze svho vstupu AUX a dojde k odpojen kabelu z tto zdky, pepne se na vstup Bluetooth a pokus se navzat spojen s naposledy sprovanm zazenm..

Poznmka: Je-li T7 spojen po Bluetooth a zrove je spojen kabelem pes AUX, nedojde k jeho pepnut na AUX pi sputn analogovho signlu.

5.1 Bluetooth pipojen

Aby mohlo dojt ke spojen T7 s njakm Bluetooth zazenm, je nejprve teba toto zazen sprovat. Sprovan zazen si pak T7 zapamatuje a je schopen se k nim pipojit kdykoli, kdy je zazen v dosahu.

T7 si me pamatovat a osm sprovanch Bluetooth zazen. Prvn sprovan zazen je pitom brno jako primrn, zatmco dal jsou jako sekundrn.

Primrn zazen bude pipojeno, kdy bude v dosahu a dojde ke stisknut tlatka Bluetooth na T7. Sekundrn zazen nebudou pipojovna automaticky, kdy budou v dosahu, ale budou muset bt pipojena pes jejich Bluetooth nastaven.

K pstroji T7 lze pipojit i dv sprovan zazen najednou, Nicmn poslouchat lze samozejm jen jedno z nich. Pi zapojen dvou zazen me jedno vystdat aktivn stream toho druhho.

Pro sprovn Bluetooth zazen s pstrojem T7 postupujte podle ne popsanch krok.

Kdy je T7 zapnut, stisknte a po 2 vteiny podrte tlatko Bluetooth. Kontrolka zane blikat a T7 vyd zvukov signl oznamujc reim provn.

Poznmka: T7 automaticky opust provac reim tehdy, nezaznamen-li po dobu 5ti minut v dosahu dn provan zazen.

Na zdrojovm Bluetooth zazen otevete menu pro nastaven Bluetooth a ovte, zda je Bluetooth zapnuto. V nabdce dostupnch zazen by se vm ml objevit Bowers & Wilkins T7. Zvolte T7 a zavete nastavovac menu. Bluetooth kontrolka na T7 bude blikat, dokud neskon proces provn a pak bude svtit stlm svtlem. Po ukonen provn se navc z T7 ozve zvukov signl.

Poznmka: Pokud vae zdrojov Bluetooth zazen nepodporuje jednoduch provn a poaduje tymstn kd, zadejte 0000.

Jakmile je spojen navzno, ovte, zda je ve zdrojovm Bluetooth zazen jako audio vstup zvolen pstroj T7. Pak byste ji mli bt schopni poslouchat zvuk pes T7.

2 vteiny

Devices Bowers & Wilkins T7

60

E

S K

Y

Pam sprovanch zazen lze u pstroje T7 vymazat stiskem a podrenm tlatek Volume " a Bluetooth po dobu 2 vtein. Bluetooth kontrolka zane blikat a T7 se po vymazn pamti restartuje.

Pro odpojen Bluetooth zazen od T7 stisknte dvakrt v rychlm sledu tlatko Bluetooth. Tm odpojte vechna pipojen Bluetooth zazen. T7 na odpojen upozorn zvukovm signlem.

5.2 Kabelov propojen

Do zdky AUX zapojte odpovdajc analogov kabel. Jakmile dojde k zasunut konektoru, zvol T7 automaticky vstup AUX. M-li pipojen zazen variabiln rove svho vstupu, nastavte ji zhruba na polovinu. Pro regulaci hlasitosti reprodukce pak radji pouvejte tlatka na T7, ne prvky na zdrojovm zazen. Pouze pokud by byla hlasitost neadekvtn rovni zvolen na T7, dolate ji na zdroji.

Poznmka: Zaregistruje-li pstroj T7 Bluetooth stream ze sprovanho zazen, automaticky se pepne na Bluetooth vstup.

6. Obsluha T7

Po sprovn s Bluetooth zdrojem i kabelovm pipojen analogovho audio zdroje je ji obsluha T7 velmi snadn.

Pro zven i snen hlasitosti pouvejte tlatka Volume + a Volume .

Pro zahjen i peruen reprodukce hudby streamovan po Bluetooth pouvejte tlatko Play/ Pause na T7. Pro peskoen na nsledujc skladbu stisknte tlatko Play/Pause dvakrt rychle za sebou. Pro peskoen na pedchoz skladbu stisknte tlatko Play/Pause tikrt rychle za sebou.

Poznmka: Tlatko Play/Pause neovld pehrvn ze vstupu AUX.

Pro pipojen k primrnmu Bluetooth zazen stisknte tlatko Bluetooth.

Pro odpojen od prv pipojenho Bluetooth zazen stisknte tlatko Bluetooth dvakrt rychle za sebou. Jsou-li pipojena dv Bluetooth zazen najednou, odpoj se ob. Odpojen Bluetooth a pepnut na vstup AUX oznamuje T7 zvukovm signlem.

Pro volbu analogovho vstupu AUX zapojte kabel, nebo odpojte T7 od Bluetooth zazen.

Pro kontrolu stavu akumultoru T7stisknte krtce tlatko Power.

Pro vypnut T7 stisknte a podrte tlatko Power.

7. T7 indiktory a zvukov znamen

Blikajc modr T7 je v rozpoznvacm reimu

Stl modr T7 je spn sprovn

Blikajc modr (rychle blikajc)

Chyba provn

LED kontrolky na boku pstroje indikuj stav akumultoru, jak je popsno na obrzku 4.

Zvukov upozornn vydv pstroj v nsledujcch ppadech

Zapnut Vypnut Zahjen reimu rozpoznvn Bluetooth Pipojen Bluetooth zazen Odpojen Bluetooth zazen Zahjen dobjen akumultoru Nzk stav dobit akumultoru Nabit akumultoru je kritick

Poznmka: Zvukov signly je mon zapnout i vypnout stisknutm tlatek Play/Pause a +.

8. Aktualizace firmware T7

as od asu se me na internetovch strnkch Bowers & Wilkins objevit v sekci podpory (Support) ke staen nov firmware pro T7.

9. Restart

Pro restartovn pstroje slou mal zaputn tlatko na zadnm panelu, kter lze stisknout nap. narovnanou kancelskou sponkou. Stisknete-li jej po dobu 2 vtein, pstroj T7 se vypne a po stisku tlatka Power se restart dokon.

Poznmka: Restart nevymae pam sprovanch Bluetooth zazen.

10. itn T7

Povrch pstroje lze utrat suchou, nenapoutnou utrkou.

11. een problm

Potebujete-li pomoci s konkrtnm problmem, zkuste se prosm podvat do sekce podpory T7 na internetovch strnkch Bowers & Wilkins: www.bowers-wilkins.com

61

E

S K

Y

Technick specifikace

Model T7

Popis Bezdrtov penosn reprosystm

Technick pednosti Bluetooth

Digitln signlov procesing (DSP)

Kvalitn D zesilovae

Dobjec lithium-ion baterie

Mnie 2x 50mm irokopsmov

2 x pasivn zi (ABR)

Frekvenn rozsah 58Hz -19kHz +/-3dB

Frekvenn psmo -6dB@ 50Hz a 21kHz

Vkon zesilovae 2 x 12W

Napjen (napjec zdroj) Vstup: 100-240Vac, 50/60Hz, 1.0A

Vstup: 15Vdc, 2.0A

Spoteba Standby: 0.141W

Reim spnku: 0.317W

Pracovn teplota Tento produkt je navren pro teplotu okolnho prosted do 45C

Vstupy Analogov AUX (stereo 3.5mm jack)

Servisn -pouze pro aktualizaci firmware (mikro USB)

Vka 114mm

ka 210mm

Hloubka 54mm

Hmotnost 940g

Ozvunice Polykarbont

Firmware verzi 1.00 A vezrls eltrhet ms firmware verziknl

62

M A

G Y

A R

www.bowers-wilkins.com

dvzli nt a Bowers & Wilkins s a T7. Ksznjk, hogy a Bowers & Wilkins-t vlasztotta. Amikor John Bowers megalaptotta a trsasgot, clja az volt, hogy az tletes dizjn, innovatv megoldsok s fejlett technolgia rvn tkletestse az otthoni hangzsvilg lmnyt. Ez az elkpzels mai napig a vllalat mozgatrugja, amely minden termknk tervezst meghatrozza.

A T7 hasznlhat: Zenk streamelshez mobiltelefonrl, tabletrl vagy

Bluetooth vezetknlkli technolgit hasznl szmtgprl.

Zenk lejtszshoz vezetkes kapcsolaton, brmilyen eszkzrl, amely analg audi kimenettel rendelkezik.

A T7 ramelltsrl egy lithium ion jratlthet akkumultor csomag gondoskodik, mely teljes feltlts utn akr 18 rs lejtszsra is alkalmas, tlagos hangerszinten.

Ez az tmutat mindent tartalmaz ahhoz, hogy n a legtbbet hozhassa ki a T7 kszlkbl. A lers a T7 doboznak tartalom ismertetsvel kezddik.

Megjegyzs: Mieltt hasznlni kezden a T7-et, gyzdjn meg arrl, hogy elolvasta s megrtette a biztonsgi instrukcikat, melyet a termkhez csomagoltunk.

MAGYAR

Contents

MAGYAR 2 1. A T7 doboznak tartalma 3

2. Amit tudni kell a T7-rl 3

3. Az akkumultor tltse 4

4. Be s kikapcsols 4

5. A T7 audi bemenetei 5

5.1 Bluetooth csatlakozs 5

5.2 Vezetkes csatlakozs 6

6. A T7 irnytsa 6

7. A T7 kijelzi s jelzhangjai 6

8. A T7 firmware frisstse 6

9. jraindts 6

10. A T7 tiszttsa 6

11. Hibaelhrts 6

Technikai specifikcik 7

63

M A

G Y

A R

1. A T7 doboznak tartalma

T7 hangsugrz T7 tpegysg Helyi hlzati adapter dugk Hasznlati tmutat csomag

Krnyezetvdelmi informcik A termk megfelel a nemzetkzi elrsoknak, idertve, de nem kizrlagosan a veszlyes anyagok elektromos s elektronikus berendezsekben trtn hasznlatnak korltozst elr RoHS irnyelvet (Restriction of Hazardous Substances), a vegyi anyagok regisztrlsrl, rtkelsrl, engedlyezsrl s korltozsrl szl REACH irnyelvet (Registration, Evaluation, Authorisation and restriction of CHemicals, valamint az elektromos s elektronikus berendezsek hulladkairl szl WEEE elrst (Waste Electrical and Electronic Equipment). A termk megfelel leselejtezsrl vagy jrahasznostsrl tovbbi informcikat a helyi hulladkkezeltl vagy hatsgtl krhet.

Megjegyzs: A T7 nem vzll s nem javasolt a hasznlata magas pratartalm helysgekben, mint pldul frdszobk, uszodk s szaunk.

2. Amit tudni kell a T7-rl

A T7 egy hifi hangsugrz, melyet a maximum hordozhatsg jegyben ksztettk el. A jobb oldalon lv Power kapcsol megnyomsa utn, a kszlk irnythat Bluetooth-on keresztl a kabinet tetejn megtallhat Play/Pause, Volume + and Volume- gombokkal. Egy kk szn kijelz a Bluetooth gomb mellett a Bluetooth kapcsolat llapott, tovbb az oldalt lv Power gomb felett egy sor fehr kijelz pedig az aktulis tltttsgi llapotot mutatja. A T7 hangjelzst is ad, nhny esemny, illetve vezrl parancs esetben.

A T7 kszlk htlapjn tallhat egy hlzati bemenet, egy kls bemenet( 3,5mm-es sztere jack) s egy szerviz aljzat (micro USB) melyet csak firmware frisstskor kell hasznlni. Egy apr jraindts gomb is tallhat a T7 htlapjn.

1. bra Gombok s csatlakoz aljzatok

Bluetooth prosts

Lejtszs/llj Hanger le Hanger fel

Be / Ki / Elem ellenrzs Kls bemenet

Szerviz (Csak firmware frisstshez)

jraindtsFkapcsol

64

M A

G Y

A R

4. bra Tltttsgi szint kijelz

3. Az akkumultor tltse

Az els kicsomagolsakor a T7 csak rszlegesen van feltltve. A feltltshez kvesse az albbi tmutatt.

Vlassza ki az n orszgnak megfelel hlzati dug tpust s pattintsa azt fel a hlzati tpegysgre. Ezt a 2.brn lthatja.

Csatlakoztassa a T7 tpegysgt a hlzati aljzatba, majd a vezetk vgt dugja a T7 htlapjn tallhat aljzatba. Ezt a folyamatot a 3.bra illusztrlja. Ha a hlzati aljzat kln kapcsolhat, akkor kapcsolja be azt is.

Miutn a T7-et csatlakoztatta a hlzathoz, az akkumultor elkezd tlteni. A teljes tltttsgi llapotot krlbell 4 ra alatt ri el. Els alkalommal legjobb, ha a teljes tltttsgig hagyjuk a kszlket a hlzaton, ugyanakkor mr tlts kzben is hasznlhat a kszlk.

Ha a kszlk jobb oldalon lv Power gombot rviden megnyomja s elengedi a gomb feletti fehr kijelzk egy kis ideig felvillannak. Innen olvashat le az aktulis tltttsgi llapot. A kijelzk felvillansnak jelentst a 4.brn lv rajzon tallhatja meg.

Megjegyzs: Brmikor tlthet a T7 kszlk, fggetlenl az akkumultor tltttsgi szintjtl.

4. Be s kikapcsols

A T7 bekapcsolshoz nyomja meg s tartsa lenyomva 2 msodpercig a Power gombot. A T7 hanggal jelzi, hogy a kszlk bekapcsolt.

Megjegyzs: Ha a T7 nincs hasznlva 10 percig, akkor automatikusan alv llapotba kerl. A T7 ilyenkor elindthat egy prostott Bluetooth kszlk zenelejtszsnak indtsval. Ugyancsak elindthat a Power vagy Bluetooth gomb megnyomsval. Ha a T7 20 percig nem kap jelet akkor automatikusan kikapcsol.

Ha elszr hasznlja a T7-et vagy az elzleg mr prostott Bluetooth eszkz nincs a sugrzsi tartomnyban, az els bekapcsolskor csak a kls bemenet hasznlhat. Olvassa el a kvetkez fejezetet, mely a Bluetooth eszkzk csatlakoztatst mutatja be.

3. bra A T7 csatlakoztatsa a hlzati aljzatba

2. bra A megfelel adapter kivlasztsa

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

65

M A

G Y

A R

5. bra Bluetooth bellts

5. A T7 audi bemenetei

A T7 kpes vezetk nlkl, egy Bluetooth kompatibilis eszkzrl vagy vezetkes mdon, egy analg kimenettel rendelkez kszlkrl hanganyagot lejtszani.

A T7 a Bluetooth s vezetkes bemenetek kztt automatikusan kapcsol t, azonban a Bluetooth kapcsolatnak van prioritsa. A kvetkez bekezdsek rjk le az alapvet szablyokat:

Ha a T7 Bluetooth- on keresztl csatlakoztatva van, de a vezetkes kls bemenetbe bedugja a dugt akkor a kszlk a kls bemenetre kapcsol.

Ha a T7 hanganyagot jtszik le vezetkes kapcsolaton s Bluetooth stream rkezik vagy a Bluetooth gombot megnyomja, akkor a kszlk Bluetooth bemenetre kapcsol.

Ha a T7 hanganyagot jtszik le vezetkes kapcsolaton keresztl s a vezetket kihzza, a T7 Bluetooth bemenetre kapcsol s megprbl csatlakozni az elsdlegesen prostott Bluetooth forrs eszkzzel.

Megjegyzs: Ha a T7 Bluetooth kapcsolaton csatlakozik s a vezetkes kapcsolat is l, egy j analg audi jel elindtsval a kszlk nem fog automatikusan tkapcsolni kls bemenetre.

5.1 Bluetooth csatlakozs

A T7 kszlkhez csatlakozni egy Bluetooth engedlyezett audi eszkzzel lehet, melyet elsknt prostani kell. A prosts utn a Bluetooth eszkz s s T7 "emlkezni" fog egymsra s kpes lesz a csatlakozsra a hattvon bell.

A T7 8 prostott Bluetooth eszkzt kpes memorizlni. Az elsknt prostott eszkz lesz az "elsdleges", az ez utn prostott kszlkeket "msodlagosknt" fogja felismerni.

Az elsdleges eszkz fog csatlakozni, ha tartomnyon bell van s a T7 Bluetooth gombjt megnyomja. A msodlagos eszkzk nem fognak automatikusan csatlakozni a sugrzsi tartomnyon bell. A kszlkeket csak a sajt Bluetooth belltsokban lehet csatlakoztatni.

Lehetsges egyszerre kt eszkzrl is csatlakozni a T7-re. Ugyanakkor a hanganyag csak az egyik eszkzrl fog szlni. Mikor kt eszkz csatlakozik, az egyik eszkz kpes fellrni a msik eszkzn lejtszsban lv hanganyagt.

A T7 prostshoz kvesse az albbi lpseket:

A bekapcsolt T7 Bluetooth gombjt nyomja meg s tartsa lenyomva 2 msodpercig. A kijelz felvillan s a T7 prosts mdba lp.

Megjegyzs: A T7 automatikusan kilp a prosts mdbl, ha 5 percen bell nem prost vele egy eszkzt.

A forrs eszkzn nyissa meg a Bluetooth belltsok menpontot, majd gyzdjn meg arrl, hogy a Bluetooth funkci be van kapcsolva. Az eszkz keresni kezdi az elrhet Bluetooth kszlkeket s megjelenik a Bowers & Wilkins T7 felirat. Vlassza ki a T7- et s zrja be a Bluetooth belltsokat. A T7 kijelzje villogni fog mg csatlakozik az eszkzhz, majd folyamatos fnnyel jelzi a sikeres csatlakozst. A T7 hanggal is jelzi, hogy ltrejtt a kapcsolat.

2 msodperc

Devices Bowers & Wilkins T7

66

M A

G Y

A R

Megjegyzs: Ha a Bluetooth audi forrs eszkz, nem tmogatja az "egyszer" prostst s kdot kr, adja meg az albbi kdot "0000"

Miutn a kapcsolat ltrejtt bizonyosodjon meg arrl, hogy a T7 van hangsugrz kimenetknt kivlasztva. A hanganyag most mr megszlal a T7 kszlken keresztl.

A prostott eszkz trlhet a Volume s a Bluetooth gombok egyttes megnyomsval s kt msodpercig trtn nyomva tartsval. A Bluetooth kijelz felvillan, jelezve, hogy a memria trldtt.

A Bluetooth eszkz levlasztshoz nyomja meg ktszer, gyorsan egyms utn a T7 Bluetooth gombjt. Ez levlasztja a Bluetooth eszkzt. A T7 hanggal is jelzi, hogy az eszkz lecsatlakozott.

5.2 Vezetkes csatlakozs

Csatlakozzon a kls bemenetre egy megfelel vezetkkel. A T7 automatikusan kivlasztja a kls bemenetet, ha a vezetk dugjt bedugja. Ha az analg audio forrson van hanger szablyzsi lehetsg, lltsa azt krlbell fl hangerre. Hasznlja a T7 hanger gombjait a forrs eszkz szablyzja helyett. Nvelheti a forrs eszkz hangerejt, ha a T7 maximlis hangereje nem elegend.

Megjegyzs: A T7 mindig automatikusan Bluetooth bemenetre kapcsol, ha audi adatfolyam rkezik egy Bluetooth forrs eszkzrl.

6. A T7 irnytsa

Miutn csatlakozott vezetkes analg vagy vezetk nlkli Bluetooth mdon a T7 irnytsa nagyon egyszer.

A hanger nvelshez vagy cskkentshez hasznlja a Volume + vagy Volume gombokat.

A Bluetooth adatfolyam lejtszshoz vagy meglltshoz hasznlja a T7 Play/Pause gombjt. A kvetkez szmra val ugrshoz nyomja meg ktszer, gyorsan egyms utn a T7 Play/Pause gombot. Az elz szmra val visszaugrshoz nyomja meg a Play/Pause gombot hromszor, gyorsan egyms utn.

Megjegyzs: a play/pause gomb nem hasznlhat, a T7 kls bemenetn.

A Bluetooth gomb megnyomsval csatlakozhat az elsdleges Bluetooth forrshoz.

A pillanatnyilag csatlakoztatott Bluetooth eszkz levlasztshoz nyomja meg ktszer gyors egyms utn a Bluetooth gombot a T7 kszlken. Ha kt Bluetooth eszkz csatlakozik, akkor mindkt eszkzt lecsatlakoztatja a T7. A T7 hanggal jelzi, hogy megtrtn a levlaszts s a kls bementre kapcsol.

Az analg kls bemenet kivlasztshoz dugja be az vezetk dugjt a htlapi aljzatba vagy vlassza le a Bluetooth eszkzt.

A T7 tltttsgnek ellenrzshez nyomja meg a Power gombot.

A T7 kikapcsolshoz nyomja meg s tarts lenyomva a Power gombot.

7. A T7 kijelzi s jelzhangjai

Kk villogs A T7 csatlakozsi mdban van

Folyamatos kk

A T7 sikeresen prostva lett egy Bluetooth eszkzzel

Kk villogs (gyors villogs)

A prosts sikertelen

A kszlk oldaln lv LED kijelzk az akkumultor tltttsgt mutatjk, melyet a 4.brn lthat.

A hangjelzsek a kvetkez mveletekkor hallhatak -

Bekapcsols Kikapcsols Bluetooth csatlakozsi mdba val belps Bluetooth eszkz csatlakoztatva Bluetooth eszkz levlasztva Akkumultor tlts indtsakor Alacsony tltttsgi szint Kritikus tltttsgi szint

Megjegyzs: A hangjelzsek ki s bekapcsolhatak a Play/Pause s a + gombok egyttes megnyomsval s felengedsvel.

8. A T7 firmware frisstse

Idnknt friss frimware jelenhet meg a kszlkhez, mely letlthet a Bowers & Wilkins weboldal T7 support menpontjbl.

9. jraindts

Az jraindtshoz egy kiegyenestett gemkapocs segtsgvel nyomja meg s tartsa lenyomva a Reboot gombot kt msodpercig. A T7 kikapcsol, majd a Power gomb megnyomsa utn bekapcsol s az jraindts befejezdtt.

Megjegyzs: Az jraindts nem trli ki a prostott eszkzket a memribl.

10. A T7 tiszttsa

A felleteket tiszta, szraz s szszmentes ronggyal vgezze.

11. Hibaelhrts

Ha hibaelhrtsra van szksge vagy olyan krds merl fel, amire szeretne vlaszt kapni, keresse fel a T7 support menpontot a Bowers & Wilkins weboldaln: www.bowers-wilkins.com

67

M A

G Y

A R

Technikai specifikcik

Model T7

Lers Vezetknlkli hordozhat hangsugrz

Technikai jellemzk Bluetooth

Digitlis jelfeldolgozs (DSP)

Kivl minsg D osztly erst

jratlthet lithium ion akkumultor

Meghajt egysgek 2x 50mm (2.0 in) szlessv

2 x kls basszus raditor (ABR)

Frekvencia vlasz 58Hz 19kHz +/-3dB

Frekvencia tartomny /-6dB/ 50Hz- tl 21kHz- ig

Erst kimeneti teljestmny 2 x 12W

Hlzati tpegysg Bemenet: 100-240Vac, 50/60Hz, 1.0A, (Tpegysg)

Kimenet: 15Vdc, 2.0A

Teljestmny felvtel Kszenlt: 0.141W

Alv llapot: 0.317W

Mkdsi hmrsklet Ez a termk csak normlis hmrskleti viszonyokhoz

kszlt, egszen 45C- ig

Bemenetek Kls analg (sztere 3.5mm jack)

Szervz csak firmware frisstshez (micro USB)

Magassg 114mm

Szlessg 210mm

Mlysg 54mm

Nett sly 940g

Kabinet Polikarbont

Wersja oprogramowania 1.00 Dziaanie moe rni si od innych wersji oprogramowania

68

P O

L S

K I

www.bowers-wilkins.com

Witamy w instrukcji obsugi urzdzenia T7 firmy Bowers & Wilkins Dzikujemy za wybr firmy Bowers & Wilkins. Kiedy John Bowers stworzy nasz firm, kierowa si przekonaniem, e kreatywne wzornictwo, innowacyjne rozwizania i zaawansowana technologia maj kluczowe znaczenie przy suchaniu muzyki w domu. Jego pogldy s nadal inspiracj dla kadego z tworzonych przez nas produktw.

T7 mona uy do: odtwarzania muzyki strumieniowanej z telefonu

komrkowego, tabletu lub komputera za pomoc bezprzewodowej technologii Bluetooth,

odtwarzania muzyki uywajc poczenia przewodowego z jakiegokolwiek urzdzenia posiadajcego analogowe wyjcie audio

T7 jest zasilane przez nadajc si do powtrnego naadowania bateri litowo-jonow, ktra w peni naadowana dostarcza 18 godzin odtwarzania przy rednim poziomie gonoci.

Niniejsza instrukcja zawiera wszelkie informacje niezbdne do uytkowania urzdzenia T7. Poniej opisana zostaa zawarto opakowania.

Uwaga: Przed uyciem T7 prosz si upewni e przeczytali i zrozumieli Pastwo instrukcje bezpieczestwa doczone do produktu.

POLSKI

Contents

POLSKI 2 1. Zawarto opakowania 3

2. O produkcie T7 3

3. adowanie baterii 4

4. Wczanie i wyczanie 4

5. Wejcia audio 5

5.1 Poczenia Bluetooth 5

5.2 Poczenie przewodowe 6

6. Obsuga T7 6

7. Wskaniki i sygnay dwikowe 6

8. Aktualizacja oprogramowania 6

9. Reset T7 6

10. Czyszczenie T7 6

11. Usuwanie problemw 6

Specyfikacje techniczne 7

69

P O

L S

K I

1. Zawarto opakowania

urzdzenie T7 kabel zasilania adaptery do rnych rodzajw gniazdek

ciennych zestaw dokumentw

Informacje o wpywie na rodowisko Niniejszy produkt jest zgodny z midzynarodowymi dyrektywami, wczajc dyrektywy RoHS (Restriction of Hazardous Substances ograniczenie uycia substancji niebezpiecznych) dla urzdze elektrycznych i elektronicznych, REACH (Registration, Evaluation, Authorisation and restriction of CHemicals bezpiecznego stosowania chemikaliw poprzez ich rejestracj i ocen) i WEEE (Waste Electrical and Electronic Equipment utylizacja odpadw elektrycznych i elektronicznych). Aby uzyska informacje na temat przetwarzania lub wyrzucania niniejszego produktu, naley skontaktowa si z lokaln instytucj zajmujc si usuwaniem odpadw.

UWAGA: T7 nie jest urzdzeniem wodoodpornym i nie jest przeznaczone do uywania w miejscach o wysokiej wilgotnoci takich jak azienki, baseny i sauny.

2. O produkcie T7

T7 jest gonikiem zbudowanym z myl o moliwoci wszechstronnego uycia. Urzdzenie wczamy za pomoc przycisku POWER znajdujcym si z prawej strony urzdzenia, a sterujemy za pomoc Bluetooth, przyciskw Play/ Pause oraz przyciskami gonoci VOLUME + i VOLUME na panelu gwnym znajdujcym si na grze urzdzenia. Niebieski wskanik ssiadujcy z przyciskiem poczenia Bluetooth pokazuje stan poczenia a biae wskaniki powyej przycisku POWER wskazuj poziom naadowania baterii. T7 dostarcza rwnie informacje dwikowe dla niektrych polece kontrolujcych dziaanie urzdzenia.

Zcze na tylnym panelu T7 zawiera wejcie do kabla zasilania, wejcie AUX (3.5mm gniazdo jack stereo), oraz port sucy wycznie do aktualizacji oprogramowania (przez micro-usb). Otwr do resetu T7 jest rwnie zlokalizowany z tyu T7.

Schemat 1 Przyciski i gniazda poczeniowe

Przycisk Bluetooth Przycisk Play/Pause

Przycisk zmniejszenia gonoci

Przycisk zwikszenia gonoci

Przycisk On/Przycisk Off/ Sprawdzenie poziomu baterii

Wejcie AUX

Wejcie serwisowe (tylko do aktualizacji oprogramowania)

RebootWejcie zasilania

70

P O

L S

K I

Schemat 4 Stan naadowania baterii

3. adowanie baterii

T7 bdzie czciowo naadowany po pierwszym rozpakowaniu. Aby naadowa urzdzenie prosz zastosowa si do instrukcji poniej.

Wybierz waciw wtyczk do gniazdka (typ europejski) i wcinij j do zasilacza w sposb pokazany na rysunku 2.

Wcz zasilacz do gniazdka i pocz z gniazdkiem wejciowym z tyu T7 w sposb widoczny na rysunku 3. Jeeli gniazdko gwne zawiera wcznik prosz wczy.

Po podczeniu T7 do zasilania bateria rozpocznie adowanie. Czas penego naadowania baterii ze stanu rozadowania wynosi przecitnie 4 godziny. Jest zalecane nie uywanie urzdzenia T7 podczas adowania baterii, przynajmniej podczas pierwszego adowania, chocia w ogle istnieje moliwo korzystania podczas adowania.

Po krtkim naciniciu przycisku POWER i puszczeniu go kolumna piciu wskanikw po prawej stronie T7 podwietli si przez krtki okres aby wskaza poziom naadowania baterii. Wskanik podwietlenia zaley od poziomu naadowania baterii jak wida na rysunku 4.

UWAGA: T7 moe by adowane w kadym czasie niezalenie od aktualnego poziomu naadowania baterii.

4. Wczanie i wyczanie

Aby wczy lub wyczy T7 nacinij i przytrzymaj przycisk POWER przez 2 sekundy. Urzdzenie wyda informacj dwikow po wczeniu.

UWAGA: Jeeli T7 jest nieuywane duej ni 10 minut automatycznie wejdzie w stan upienia. Aby wczy T7 z powrotem w stan gotowoci wystarczy rozpocz strumieniowanie muzyki ze sparowanego z Bluetooth urzdzenia. T7 rwnie przejdzie w stan gotowoci przez nacinicie przycisku Bluetooth lub POWER. Jeeli T7 jest nieuywane duej ni 20 minut wyczy si automatycznie.

Jeeli T7 nie by uprzednio uywany lub nie jest w zasigu poprzednio uywanego urzdzenia Bluetooth podczas pierwszego wczenia tylko wejcie AUX bdzie gotowe do dziaania. W kolejnych czciach instrukcji przedstawiono informacje dotyczce poczenia Bluetooth.

Schemat 3 Podczenie T7 do gniazdka

Schemat 2 Wybr waciwego adaptera

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

71

P O

L S

K I

Schemat 5 Ustawienia Bluetooth

5. Wejcia audio

T7 moe odtwarza bezprzewodowo przez kompatybilne urzdzenie Bluetooth lub przez poczenie przewodowe z wejciem analogowym innego urzdzenia.

T7 automatycznie wybierze poczenie pomidzy Bluetooth a poczeniem przewodowym chocia urzdzenie Bluetooth ma zawsze priorytet. Nastpujce zasady dotycz poczenia:

jeeli T7 jest poczony przez Bluetooth a do wejcia AUX T7 podczymy przewd urzdzenie automatycznie przeczy si na wejcie AUX,

jeeli T7 odtwarza dwik przez wejcie AUX i otrzyma sygna Bluetooth lub przycisk Blutooth zostanie przycinity, T7 zostanie przeczony na poczenie Bluetooth,

jeeli T7 odtwarza dwik przez wejcie AUX i odczymy z gniazda AUX przewd T7 przeczy si na poczenie Bluetooth i sprbuje poczy si z gwnym sparowanym urzdzeniem.

UWAGA: Jeeli T7 jest poczone przez Bluetooth podczas gdy kabel jest rwnie podczony nowy sygna analogowy nie spowoduje automatycznego przeczenia T7 do wejcia poczenia kablowego.

5.1 Poczenia Bluetooth

Aby poczy T7 do urzdzenia kompatybilnego z technologi Bluetooth urzdzenie musi by sparowane z T7. Po sparowaniu urzdzenia Bluetooth i T7 automatycznie zapisz ustawienia i bd gotowe poczy si kiedy s w zasigu.

T7 zapamita do 8 sparowanych urzdze. Pierwsze urzdzenie ktre zostao sparowane bdzie uywane jako gwne pozostae bd wyznaczone jako drugorzdne.

Urzdzenie gwne bdzie poczone jako urzdzenie gwne gdy jest w zasigu i po wciniciu przycisku Bluetooth. Urzdzenia drugorzdne nie bd poczone automatycznie kiedy s w zasigu, musz zosta wybrane przez ustawienia Bluetooth.

Jest moliwe jednoczesne poczenie dwch sparowanych urzdze do T7. Jednak dwik bdzie syszany tylko z jednego ze sparowanych urzdze. Kiedy dwa urzdzenia s wczone jedno z urzdze moe nakada si na strumie dwiku.

Aby sparowa urzdzenie kompatybilne z Bluetooth z urzdzeniem T7 wykonaj nastpujce kroki:

Wcz urzdzenie T7, przycinij i przytrzymaj przycisk Bluetooth przez 2 sekundy. Wskanik zacznie miga i dostarczy informacji dwikowej kiedy wejdzie w stan parowania urzdze.

UWAGA: T7 automatycznie wyjdzie ze stanu parowania jeeli urzdzenie nie zostanie sparowane w cigu 5 minut.

Otwrz ustawienia Bluetooth na urzdzeniu rdowym i upewnij si, e opcja Bluetooth jest wczona. Po wykryciu przez urzdzenie rdowe Bowers&Wilkins T7 pojawi si jako dostpne urzdzenie Bluetooth. Wybierz T7 i zamknij ustawienia Bluetooth. Wskanik Bluetooth zacznie miga co jest informacj e parowanie jest w trakcie i podwietli si cakowicie kiedy parowanie zostanie zakoczone. T7 rwnie wyda syszaln informacj dwikow po zakoczeniu parowania.

2 sekundy

Devices Bowers & Wilkins T7

72

P O

L S

K I

UWAGA: Jeeli urzdzenie rdowe nie wspiera opcji prostego parowania i prosi o czterocyfrowy kod, wprowad 0000.

Kiedy poczenie zostao nawizane upewnij si e T7 wybrane zostao jako urzdzenie wyjciowe dla sygnau audio urzdzenia rdowego. Dwik bdzie teraz syszalny z T7.

Pami sparowanego urzdzenia moe by wyczyszczona poprzez jednoczesne przytrzymanie przyciskw VOLUME oraz przycisku Bluetooth przez dwie sekundy. Wskanik poczenia Bluetooth zacznie miga i T7 uruchomi si ponownie po wyczyszczeniu pamici.

Aby rozczy urzdzenie Bluetooth z T7 nacinij szybko przycisk Bluetooth dwa razy. Usyszysz informacj dwikow informujc o rozczeniu Bluetooth.

5.2 Poczenie przewodowe

Uyj waciwego przewodu do podczenia do wyjcia AUX. T7 automatycznie wybierze wejcie AUX kiedy do gniazda AUX zostanie podczony przewd. Jeeli rdo analogowe posiada kontrol gonoci, pocztkowo ustaw gono w poowie skali. Do regulacji gonoci uywaj racze przyciskw kontroli gonoci na T7 ni urzdzenie rdowego. Zwiksz rdo na urzdzeniue rdowym tylko gdy nie zadowala ci gono maksymalna ustawiona na T7.

UWAGA:T7 zawsze przeczy si automatycznie do Bluetooth jeeli strumie dwikowy jest otrzymywany ze sparowanego, gwnego urzdzenia rdowego.

6. Obsuga T7

Po sparowaniu urzdzenia lub po podczeniu przewodowo urzdzenia rdowego obsuga T7 jest prosta.

Aby zwikszy lub zmniejszy gono nacinij odpowiednio przycisk Volume + lub Volume .

eby odtworzy lub zatrzyma ciek dwikow nacinij przycisk Play/Pause. Aby przeskoczy do nastpnego utworu nacinij szybko 2 razy przycisk Play/Pause. Aby przeskoczy do poprzedniego utworu nacinij szybko przycisk Play/Pause 3 razy.

UWAGA: PrzyciskPlay/Pause nie kontroluje dwiku z wejcia AUX.

Aby poczy si z gwnym urzdzeniem rdowym przez Bluetooth nacinij przycisk Bluetooth.

Aby rozczy aktualnie poczone urzdzenie Bluetooth nacinij szybko dwukrotnie przycisk Bluetooth. Jeeli dwa urzdzenia s poczone za pomoc Bluetooth oba bd rozczone. T7 dostarczy syszalnej informacji dwikowej rozczenia Bluetooth i przeczy si do poczenia AUX.

Aby wybra analogowe wejcie przewodowe T7 wepnij do wejcia AUX przewd poczeniowy lub rozcz poczenie z urzdzeniami Bluetooth.

Aby sprawdzi adowanie baterii T7 nacinij przycisk POWER.

Aby wyczy T7 nacinij i przytrzymaj przycisk POWER.

7. Wskaniki i sygnay dwikowe

Niebieskie wiato migajce

T7 jest w stanie wykrywania

Niebieskie wiato stae

T7 pomylnie sparowane z urzdzeniem Bluetooth

Niebieskie wiato szybko migajce

Parowanie nieudane

Diody z bok produktu wskazuj poziom naadowania baterii tak jak pokazuje rysunek 4.

Sygnay dwikowe syszalne s po wykonaniu nastpujcych operacji:

wczenie T7 wyczenie T7 wejcie w tryb wykrywania poczenie z urzdzeniem rdowym przez Bluetooth dokonane rozczenie z urzdzeniem rdowym przez Bluetooth dokonane rozpoczcie adowania baterii niski poziom naadowania bateria rozadowana

UWAGA: Istnieje moliwo wczania i wyczania sygnaw dwikowych przez przyciskanie przyciskw PLAY/PAUSE oraz +

8. Aktualizacja oprogramowania

Aktualizacja oprogramowania moe by dostpna ze strony internetowej Bowers&Wilkins w sekcji wsparcia klienta.

9. Reset T7

Aby wykona reset urzdzenia uyj wyprostowanego spinacza do papieru i przytrzymaj przycisk REBOOT przez dwie sekundy. T7 wyczy si, nacinij przycisk POWER aby zakoczy reset urzdzenia.

UWAGA: Zresetowanie urzdzenia nie wyczyci z pamici urzdze sparowanych z T7.

10. Czyszczenie T7

Wytrzyj powierzchni such mikk delikatn ciereczk.

11. Usuwanie problemw

Jeli konieczne jest usunicie okrelonego problemu lub znalezienie odpowiedzi na pytanie zwizane z uytkowaniem urzdzenia, naley skorzysta z sekcji Support na naszej witrynie internetowej www.bowers-wilkins.com

73

P O

L S

K I

Specyfikacje techniczne

Model T7

Opis Bezprzewodowy system muzyczny

Funkcje techniczne Bluetooth

Digital Signal Processing (DSP)

Wysokiej jakoci wzmacniacz Klasy D

Bateria do ponownego adowania

Goniki Penozakresowe 2 x 50mm (2 cale)

2 x Auxilliary Bass Radiators (ABR)

Pasmo przenoszenia 58Hz -19kHz +/-3dB

Zakres czstotliwoci -6dB przy 50Hz do 21kHz

Moc wyjciowa wzmacniacza 2 x 12W

Napicie zasilania Wejcie: 100-240Vac,50/60Hz,1.0A

Wyjcie: 15Vdc, 2.0A

Pobr mocy Stan gotowoci: 0.141W

Stan czuwania: 0.317W

Temperatura operacyjna Do 45 stopni Celsjusza

Wejcia AUX analogowe (3.5 mm stereo jack)

Serwisowe tylko synchronizacja i aktualizacje oprogramowania (micro USB)

Wysoko 114mm

Szeroko 210mm

Gboko 54mm

Waga netto 940g

Obudowa Poliwglan

1.00

74

www.bowers-wilkins.com

Bowers & WilkinsT7 Bowers & WilkinsJohn

Bowers

T7

T7

18

T7

T7

T7

Contents

2 1. T7 3

2. T7 3

3. 4

4. 4

5. T7 5

5.1 5

5.2 6

6. T7 6

7. T7 6

8. T7 6

9. 6

10. T7 6

11. 6

7

75

1. T7

T7 T7

(RoHS) (REACH) (WEEE)

T7

2. T7

T7Hi-Fi T7/ +- T7

T7(3.5 )(micro-USB) T7

1

/

// ( )

76

4

3.

T7T7

2

T7 T73

T7 T7 T7

T7 4

T7

4.

T72T7

T710 T7 T7T720

T7

3 T7

2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

77

5

5. T7

T7

T7

T7 T7

T7 T7

T7 T7

: T7 T7

5.1

T7 T7 T7

T7

T7

T7

T7

T72 T7

5T7

Bowers & Wilkins T7 T7 T7 T7

0000

T7 T7

2

Devices Bowers & Wilkins T7

78

T7

T7T7 T7

5.2

T7 T7 T7

T7

6. T7

T7

T7+-

T7/ / /

/T7

T7 T7

T7

T7

T7

7. T7

T7

LED4

-

/+

8. T7

Bowers & WilkinsT7 T7

9.

T7

10. T7

11.

Bowers & WilkinsT7 www.bowers-wilkins.com

79

T7

(DSP)

D

2x 50mm (2.0 in)

2 x (ABR)

58Hz - 19kHz +/-3dB

-6dB@ 50Hz to 21kHz

2 x 12W

100-240Vac50/60Hz1.0A

15Vdc2.0A

: 0.141W

: 0.317W

45

- 3.5mm

- (USB)

114mm

210mm

54mm

940g

1.00

80

www.bowers-wilkins.com

Bowers & WilkinsT7

Bowers & WilkinsJohn

Bowers

T7

T7

18

T7

T7

T7

Contents

2 1. T7 3

2. T7 3

3. 4

4. 4

5. T7 5

5.1 5

5.2 6

6. T7 6

7. T7 6

8. T7 6

9. 6

10. T7 6

11. 6

7

81

1. T7

T7 T7

(RoHS) (REACH) (WEEE)

T7

2. T7

T7Hi-Fi T7/ +- T7

T7(3.5 )(micro-USB) T7

1

/

// ( )

82

4

3.

T7T7

2

T7 T73

T7 T7 T7

T7 4

T7

4.

T72T7

T710 T7 T7T720

T7

3 T7

2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

83

5

5. T7

T7

T7

T7 T7

T7 T7

T7 T7

: T7 T7

5.1

T7 T7 T7

T7

T7

T7

T7

T72 T7

5T7

Bowers & Wilkins T7 T7 T7 T7

0000

T7 T7

2

Devices Bowers & Wilkins T7

84

T7

T7T7 T7

5.2

T7 T7 T7

T7

6. T7

T7

T7+-

T7/ / /

/T7

T7 T7

T7

T7

T7

7. T7

T7

LED4

-

/+

8. T7

Bowers & WilkinsT7 T7

9.

T7

10. T7

11.

Bowers & WilkinsT7 www.bowers-wilkins.com

85

T7

(DSP)

D

2x 50mm (2.0 in)

2 x (ABR)

58Hz - 19kHz +/-3dB

-6dB@ 50Hz to 21kHz

2 x 12W

100-240Vac50/60Hz1.0A

15Vdc2.0A

: 0.141W

: 0.317W

45

- 3.5mm

- (USB)

114mm

210mm

54mm

940g

1.00

86

www.bowers-wilkins.com

Bowers & Wilkins T7 Bowers & Wilkins John BowersB&W B&W B&W

T7 Bluetooth

T7 18

T7 T7

T7

Contents

2 1. T7 3 2. T7 3 3. 4 4. 4 5. T7 5 5.1 Bluetooth 5 5.2 6 6. T7 6 7. T7 6 8. T7 6 9. 6 10. T7 6 11. 6 7

87

1. T7

T7 T7

RoHS

REACHWEEE

T7

2. T7

T7Hi-Fi Bluetooth Bluetooth Bluetooth T7

T7AUX 3.5mm USB T7

1

Bluetooth

AUX

88

4

3.

T7

2

3 T7

T7 4 T7 T7

T75 4

T7

4.

T72

T710 T7 Bluetooth Bluetooth T720

T7 Bluetooth AUXBluetooth 3

T7

2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80% 60% 40% 20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

89

5 Bluetooth

5. T7

T7Bluetooth

T7Bluetooth Bluetooth

T7BluetoothAUX AUX

AUXBluetooth Bluetooth Bluetooth

AUX Bluetooth

AUX T7BluetoothBluetooth T7AUX

5.1 Bluetooth

T7Bluetooth BluetoothT7

T78Bluetooth

T7Bluetooth Bluetooth

T72 12

BluetoothT7

T7Bluetooth 2 .

5Blutooth

Bluetooth Bluetooth BluetoothBowers & Wilkins T7Bluetooth T7Bluetooth T7Bluetooth

Bluetooth 4 0000

2

Devices Bowers & Wilkins T7

90

T7 T7

Bluetooth2 Bluetooth T7

Bluetooth T7Bluetooth2 Bluetooth Bluetooth

5.2

AUX T7AUX T7T7

Bluetooth T7Bluetooth

6. T7

Bluetooth T7

Bluetooth T7 2 3

T7AUX

Bluetooth Bluetooth

Bluetooth Bluetooth22 BluetoothT7 Bluetooth AUX

T7 Bluetooth

T7

T7

7. T7

T7Bluetooth

T7Bluetooth

4

Bluetooth Bluetooth Bluetooth

8. T7

T7 Bowers & WilkinsT7

9.

2 T7

10. T7

11.

Bowers & Wilkins

www.bowers-wilkins.comT7

91

T7

Bluetooth

DSP

D

2 x 50mm (2.0 inch)

2 x ABR

58 Hz - 19k Hz +/-3 dB

-6 dB 50 Hz21 kHz

2 x 12 w

AC100240 V 50/60 Hz1.0 A DC15 V2.0 A

0.141 W 0.317 W

45

AUX3.5 mm

USB

114 mm

210 mm

54 mm

940 g

1.00 .

92

www.bowers-wilkins.com

Bowers & Wilkins

.

Bowers & Wilkins John Bowers , . Bowers & Wilkins Bowers & Wilkins .

T7 . , ,

.

. T7 . , 18 .

T7 .

: T7 .

Contents

2 1. 3

2. T7 3

3. 4

4. On/Off 4

5. T7 5

5.1 5

5.2 6

6. T7 6

7. T7 6

8. T7 6

9. 6

10. T7 6

11. 6

7

93

1.

T7 T7 , ,

B&W (RoHS), (REACH) (WEEE) . .

: T7 , , .

2. T7

T7 Hi-Fi . , /, , . . .

T7 , AUX (3.5mm ), ( USB) . .

1

/

On / Off / Aux ( )

94

4

3.

T7 . .

2 .

T7 T7 . 3 . .

T7 . 4 . .

T7 5 . 4 .

: T7 .

4. On/Off

T7 2 . .

: T7 10 . . . T7 20 .

AUX . .

3

2

POWER AUX SERVICE REBOOT

POWER AUX SERVICE REBOOT

100%

80%

60%

40%

20%

China Europe Korea

Australia New Zealand

USA Taiwan Japan

United Kingdom

95

5

5. T7

T7 .

T7 .

T7 AUX AUX .

T7 AUX , .

T7 AUX .

: T7 AUX .

5.1

T7 . T7 .

T7 8 . .

T7 . .

T7 . .

T7 .

T7 2 .

: 5 .

. T7 . T7 . T7 .

: simple 4 0000 .

T7 . T7 .

2

Devices Bowers & Wilkins T7

96

Volume Bluetooth 2 T7 . .

T7 . .

5.2

AUX . T7 AUX . 1/2 . T7 . T7 .

: T7 .

6. T7

T7 .

T7 +/- .

T7 / . / 2 / 3 .

: / AUX .

.

2 . 2 T7 . AUX .

.

.

.

7. T7

LED . ( 4 )

.

on off .

: on/off Play/Pause' '+' .

8. T7

Bowers Walkins T7 Support T7 .

9.

2 . T7 .

: .

10. T7

.

11.

Bowers Wilkins www.bowers-wilkins.com T7 Support .

97

T7

(DSP)

D

2x 50mm

2 x Auxiliary Bass Radiator (ABR)

58Hz 19kHz +/-3dB

-6dB@ 50Hz~21kHz

2 x 12W

: 100-240Vac, 50/60Hz, ( ) : 15Vdc, 2.0A

: 0.141W : 0.317W

45 .

AUX ( 3.5mm )

( USB)

114mm

210mm

<

Manualsnet FAQs

If you want to find out how the T7 Wireless Bowers Wilkins works, you can view and download the Bowers Wilkins T7 Wireless v2 Owner’s Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Bowers Wilkins T7 Wireless as well as other Bowers Wilkins manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Bowers Wilkins T7 Wireless. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bowers Wilkins T7 Wireless v2 Owner’s Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bowers Wilkins T7 Wireless v2 Owner’s Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bowers Wilkins T7 Wireless v2 Owner’s Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bowers Wilkins T7 Wireless v2 Owner’s Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Bowers Wilkins T7 Wireless v2 Owner’s Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.