EnglishOwners ManualBCB-30X Pedal Board Before using this unit, carefully read USING THE UNIT SAFELY and IMPORTANT NOTES. After reading, keep the document(s) where it will be available for immediate reference.
2020 Roland Corporation
Effect Unit Installation Examples By cutting the included holding pad to match the shape of the products that you want to install, you can hide the cabling and create a clean layout.
Example 1 Example 2 Example 3
USING THE UNIT SAFELY
Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.
* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.
Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
Do It Yourself 1 (Cutting the Holding Pad) When installing stompboxes, you can save layout time by using the existing pre-cuts in the holding pad to remove unneeded portions. The cutouts at the left and right of the holding pad indicate the positions that are above the cable guides (places to conceal long cables) when it is placed in the case. Use these cutouts when deciding where to position your effect units, and cut the holding pad so that cables can be accommodated neatly when the effect units are installed.
* If you use a knife to cut the holding pad, take care not to injure yourself. * When cutting the cutouts, take care not to damage nearby equipment with the knife.
Holding pad
Cutouts
Cable guide
Do It Yourself 2 (Keeping the Cables Neat) If the power supply parallel cable and long patch cables are aligned with the cable guide, the cables can be managed neatly.
Cable guide
MEMO
To detach the lid, lift it to the position shown in the illustration, and then press in the direction of the arrow.
Making Connections
* To prevent malfunctions or speaker damage, be sure to minimize the volume of all devices and power them off before you make connections.
* After you have made connections correctly, you must observe the following procedure when turning on the power Malfunctions or speaker damage might occur if you fail to observe the correct order.
Main Specifications
Dimensions 330 (W) x 307 (D) x 100 (H) mm
13 (W) x 12-1/8 (D) x 3-15/16 (H) inches
Inside dimensions 66 (H) mm
2-5/8 (H) inches
Weight 1.3 kg
2 lbs 14 oz
Accessories 4-pin parallel DC cable x 1
Pre-cut insert pad (thickness: 10 mm) x 1
Owners Manual
Option (sold separately)
AC adaptor: PSA series
Pre-cut insert pad (thickness: 10 mm)
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.
When turning the power on: Power-on the amp last. When turning the power off: Power-off the amp first.
Roland Corporation 2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN
Roland Corporation ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440 Geel, BELGIUM
Importer:
Manufacturer: For EU Countries
Roland Corporation 2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN
Roland Europe Group Limited Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA United Kingdom
Importer:
Manufacturer: For the U.K.
For EU Countries
IMPORTANT NOTES Placement Depending on the material and
temperature of the surface on which you place the unit, its rubber feet may discolor or mar the surface.
Maintenance Never use benzine, thinners, alcohol
or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
Additional Precautions When disposing of the packing carton
or cushioning material in which this unit was packed, you must observe the waste disposal regulations that apply to your locality.
When opening/closing the lid, please be careful not to get your fingers pinched between the movable part and the unit. In places where small children are present, make sure that an adult provides supervision and guidance.
Intellectual Property Right Roland, BOSS are either registered
trademarks or trademarks of Roland Corporation in the United States and/or other countries.
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
WARNING Do not disassemble or modify by yourself Do not carry out anything unless you are instructed to do so in the owners manual. Otherwise, you risk causing malfunction.
Do not repair or replace parts by yourself Be sure to contact your dealer, a Roland service center, or an official Roland dealer. For a list of Roland service centers and official Roland dealers, refer to the Roland website.
Do not place in an unstable location Otherwise, you risk injury as the result of the unit toppling over or dropping down.
WARNING Do not use or store in the following types of locations Subject to temperature extremes
(e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
Damp (e.g., baths, washrooms, on wet floors); or are
Exposed to steam or smoke; or are Subject to salt exposure; or are Exposed to rain; or are Dusty or sandy; or are Subject to high levels of vibration and
shakiness; or are Placed in a poorly ventilated location.
Be cautious to protect children from injury Always make sure that an adult is on hand to provide supervision and guidance when using the unit in places where children are present, or when a child will be using the unit.
WARNING Do not drop or subject to strong impact Otherwise, you risk causing damage or malfunction.
CAUTION Avoid climbing on top of the unit, or placing heavy objects on it Otherwise, you risk injury as the result of the unit toppling over or dropping down.
Take care so as not to get fingers pinched When handling the following moving parts, take care so as not to get fingers, toes, etc., pinched. Whenever a child uses the unit, an adult should be on hand to provide supervision and guidance. Lid
If you use a knife to cut the holding pad, take care not to injure yourself.
When trimming the cutouts, take care that the knife does not damage nearby devices.
For details on the BCB-30X, refer to the Boss website.
https://www.boss