Boss WAZA-AIR Tone Studio Android Connection Guide PDF

1 of 7
1 of 7

Summary of Content for Boss WAZA-AIR Tone Studio Android Connection Guide PDF

Connecting the BOSS TONE STUDIO Android App to the WAZA-AIR Unit

For details on how to use BOSS TONE STUDIO, refer to the Using BOSS TONE STUDIO for WAZA-AIR PDF.

01 2019 Roland Corporation

1. Power-on the WAZA-AIR unit and the mobile device.

2. In your mobile devices settings, turn Bluetooth on.

NOTE

Even if the Available devices list shows WAZA-AIR MIDI, dont tap it.

3. Start the BOSS TONE STUDIO for WAZA-AIR app that you installed in your mobile device.

4. Tap [Bluetooth MIDI DEVICE] that appears in the screen, and then tap WAZA-AIR MIDI.

Verify that * is shown at the upper right of WAZA-AIR MIDI.

* If WAZA-AIR MIDI is not shown, tap SCAN at the very bottom of the Bluetooth Devices screen, and search again.

5. Tap the Android back button to return to the previous screen.

6. Verify that WAZA-AIR MIDI is shown for CONNECT.

WAZA-AIR MIDI

7. Tap [OK] to start communication.

If you cant connect Check each of the following five items one at a time.

1 In the settings of the WAZA-AIR unit, is the Bluetooth function turned on?

Verify that the WAZA-AIR units Bluetooth indicator is blinking or lit.

If it is unlit, long-press the Bluetooth Multi Function button to make it blink.

2 In step 2 (p.2) of the procedure, could you have tapped a model name shown on the mobile device?

When you turn the Bluetooth switch on in step 2, WAZA-AIR MIDI might appear in the list of Available devices but you should not tap it. If you tapped it, clear the pairing, and try the procedure again from step 1.

Clearing the pairing

1. Tap the gear icon shown beside WAZA-AIR MIDI in Paired devices, and tap Unpair.

2. Turn the Bluetooth switch off.

3 Turn Bluetooth on and off once again

Turn Bluetooth on/off again.

4 Close all apps, and try the procedure again from step 1 (p.2)

If youve checked 1 3 and still cannot connect to the app, close all apps that are running on your mobile device.

If the WAZA-AIR is paired, clear the pairing.

Closing the app Tap the Android multitasking button, and swipe right on the app screen.

5 When using on Android 6.0 or later, turn Android Location mode on

6 Power-off the mobile device and the WAZA-AIR unit, and then power them on again

If youve checked 1 5 and still cannot connect to the app, power-off the mobile device and the WAZA-AIR, wait for about 10 s

Manualsnet FAQs

If you want to find out how the WAZA-AIR Boss works, you can view and download the Boss WAZA-AIR Tone Studio Android Connection Guide on the Manualsnet website.

Yes, we have the Connection Guide for Boss WAZA-AIR as well as other Boss manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Connection Guide should include all the details that are needed to use a Boss WAZA-AIR. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Boss WAZA-AIR Tone Studio Android Connection Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Boss WAZA-AIR Tone Studio Android Connection Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Boss WAZA-AIR Tone Studio Android Connection Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Boss WAZA-AIR Tone Studio Android Connection Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Boss WAZA-AIR Tone Studio Android Connection Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.