Boss VB-2w Waza Craft Owner’s Manual PDF

1 of 1
1 of 1

Summary of Content for Boss VB-2w Waza Craft Owner’s Manual PDF

Owners Manual

OUTPUT jack Connect this jack to your amp or to the input of another effect unit.

Guitar Amplifier

DEPTH jack If an expression pedal is connected, you can use the pedal to control the depth of modulation.

* Refer to Caution When Using the DEPTH Jack.

Before using this unit, carefully read the sections entitled: USING THE UNIT SAFELY and IMPORTANT NOTES (supplied on a separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference.

Precautions When Connecting * To prevent malfunction and equipment failure, always turn

down the volume, and turn off all the units before making any connections.

* Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/ or damage to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn off the power to your guitar amp first.

* Due to the characteristics of its analog circuitry, this units CHECK indicator may be lit (effect on) or unlit (effect off) when you turn the power on.

Use of Battery * A battery was installed in the unit before it left the factory. The

life of this battery may be limited, however, since its primary purpose was to enable testing.

* If you handle batteries improperly, you risk explosion and fluid leakage. Make sure that you carefully observe all of the items related to batteries that are listed in USING THE UNIT SAFELY and IMPORTANT NOTES (supplied on a separate sheet).

* When operating on battery power only, the units indicator will become dim when battery power gets too low. Replace the battery as soon as possible.

* Batteries should always be installed or replaced before connecting any other devices. This way, you can prevent malfunction and damage.

Changing the Battery 1. Hold down the

pedal and loosen the thumbscrew, then open the pedal upward.

* The pedal can be opened without detaching the thumbscrew completely.

2. Remove the old battery from the battery housing, and remove the snap cord connected to it.

3. Connect the snap cord to the new battery, and place the battery inside the battery housing.

* Be sure to carefully observe the batterys polarity (+ versus -).

4. Slip the coil spring onto the spring base on the back of the pedal, and then close the pedal.

* Carefully avoid getting the snap cord caught in the pedal, coil spring, and battery housing.

5. Finally, insert the thumbscrew into the guide bush hole and fasten it securely.

Caution When Using the DEPTH Jack * Use only the specified expression pedal (BOSS FV-500H,

FV-500L, Roland EV-5; sold separately). By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit.

* You can use the DEPTH knob to adjust the amount of modula- tion that occurs when the pedal is in the maximum position.

* You can use the minimum volume control of the EV-5 to adjust the amount of modulation that occurs when the pedal is in the minimum position.

Specifications BOSS VB-2W: Vibrato

Nominal Input Level -20 dBu

Input Impedance 1 M

Nominal Output Level -20 dBu

Output Impedance 1 k

Recommended Load Impedance 10 k or greater

Power Supply DC 9 V: Carbon-zinc battery (9 V, 6F22)/ Alkaline battery (9 V, 6LR61), AC Adaptor (sold separately)

Current Draw

35 mA

* Expected battery life under continuous use: Carbon: Approx. 4 hours Alkaline: Approx. 22 hours These figures will vary depending on the actual conditions of use.

Dimensions 73 (W) x 129 (D) x 59 (H) mm

2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

Weight 450 g/1 lb (including battery)

Accessories

Owners Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), Alkaline battery (9 V, 6LR61)

Option (sold separately)

AC adaptor (PSA series)

Expression pedal (BOSS FV-500H, FV-500L, Roland EV-5)

* 0 dBu = 0.775 Vrms

Thumbscrew

Battery Housing

Pedal

Spring Base

Coil Spring

Guide Bush Hole

Battery Snap Cord

Battery Snap

9 V Battery

* 5 1 0 0 0 4 8 6 1 3 - 0 1 *

Thumbscrew When this screw is loosened, the pedal will open, allowing you to change the battery.

* For instructions on changing the battery, refer to Chang- ing the Battery.

AC Adaptor (PSA series: optional)

Electric Guitar

English

This is a WAZA CRAFT series effect unit featuring analog circuitry painstakingly designed in every detail for the best possible sound. It is a vibrato unit featuring a unique effect that uses a carefully selected BBD. In addition to the sound of the original VB-2, youll enjoy a custom tone thats been fully tuned-up by BOSS engineers.

Main Features

INPUT jack This jack accepts signals coming from a guitar or other musical instrument, or another effects unit.

* The INPUT jack doubles as the power switch. Power to the unit is turned on when you plug into the INPUT jack; the power is turned off when the cable is unplugged. To prevent unnecessary battery consumption, be sure to disconnect the plug from the INPUT jack when not using the effects unit.

Panel Descriptions DC IN jack Accepts connection of an AC Adaptor (PSA series; optional). By using an AC Adaptor, you can play without being concerned about how much battery power you have left.

* Use only the specified AC adaptor (PSA series; optional), and connect it to an AC outlet of the correct voltage. Do not use any other AC adaptor, since this may cause malfunction.

* If the AC adaptor is connected while a battery is installed, the power supply is drawn from the AC adaptor.

* We recommend that you keep batteries installed in the unit even though youll be powering it with the AC adaptor. That way, youll be able to continue a performance even if the cord of the AC adaptor gets accidently disconnected from the unit.

CHECK indicator This indicator shows whether the effect is on or off, and also doubles as the battery check indicator. The indicator lights when the effect is on.

* If youre powering the unit with a battery and the CHECK indicator goes dim or doesnt light at allwhen you try to turn the effect on, the battery is near depletion and should be replaced. For instructions on changing the battery, refer to Changing the Battery.

* The CHECK indicator shows whether the effect is being applied or not. It does not indicate whether the power to the device is on or not.

Pedal switch This switch turns the effect on/off.

RATE knob

RISE TIME knob

DEPTH knob

Standard/Custom switch

MODE knob

Adjusts the modulation speed of the vibrato effect.

Adjusts the time until the maximum vibrato effect is reached.

Adjusts the modulation depth of the vibrato effect.

Switches the function of the pedal.

UNLATCH The vibrato effect is on only while you hold down the pedal.

BYPASS The vibrato effect turns on/off each time you press the pedal. Turning the vibrato effect off bypasses the BBD so that the audio signal does not pass through it.

LATCH The vibrato effect turns on/off each time you press the pedal.

* When the vibrato effect is turned off in UNLATCH or LATCH mode, the audio signal passes through the BBD so that the effect can begin smoothly.

Switches the tonal character.

S (standard): The original tone of the

Manualsnet FAQs

If you want to find out how the Waza Craft Boss works, you can view and download the Boss VB-2w Waza Craft Owner’s Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Boss Waza Craft as well as other Boss manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Boss Waza Craft. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Boss VB-2w Waza Craft Owner’s Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Boss VB-2w Waza Craft Owner’s Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Boss VB-2w Waza Craft Owner’s Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Boss VB-2w Waza Craft Owner’s Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Boss VB-2w Waza Craft Owner’s Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.