Contents

Bosch GTA 60 W Stand Instruction Manual V2 PDF

Bosch GTA 60 W Stand Instruction Manual V2 PDF
Pages 42
Year 2020
Language(s)
Arabic ar
English en
French fr
Indonesian id
Thai th
Persian fa
Vietnamese vi
Spanish sp
Chinese zh
Portuguese pt
1 of 42
1 of 42

Summary of Content for Bosch GTA 60 W Stand Instruction Manual V2 PDF

Robert Bosch Power Tools GmbH 70538 Stuttgart GERMANY

www.bosch-pt.com

1 609 92A 5YE (2020.10) PS / 42

en Original instructions fr Notice originale pt Manual original es Manual original pt Manual de instrues original zh zh

th

id Petunjuk-Petunjuk untuk Penggunaan Orisinal

vi Bn gc hng dn s dng ar fa

1 609 92A 5YE

GTA 60 W Professional

2 |

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

Franais . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10

Portugus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pgina 13

Espaol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pgina 16

Portugus do Brasil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pgina 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Bahasa Indonesia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 30

Ting Vit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 3

J

J

J

I

(2)(1)

(3)

(4)

(5)

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

4 |

J J

J

I

6 x M10 x 100

2 x M10 x 50

4 x M6 x 110

4 x M6 x 75

4 x M6 x 45

18 x M10

8 x M6

2 x M10

6 x M10

6 x M8

4 x M6 6 x M8 x 50

(6)

(1)

(7)

(10)

(8)

(9)

(8)

(9)

(11)

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 5

M8 x 50

M10 x 50

M10

M10 x 100M10M10

M10 x 100M10 M10

A B

C D

(7)

(6) (6) (7)

(8)

(10)

(6)

(1)

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

6 |

M10M10 M10 x 100

E

F

(9)

(2)

(4)

(3)

(10)

(1)

(12)

(5)

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 7

JJ

J

I

G

H

(3)

(2)

(4)

(10)

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

8 | English

English Safety Instructions General Safety Instructions

Read all the warnings and instructions in- cluded with the saw stand or the power tool you intend to mount on it. Failure to observe the safety information and follow instructions may result in electric shock, fire and/or serious injury.

Safety Instructions for Saw Stands u Disconnect the plug from the power source and/or re-

move the battery from the power tool before making any adjustments to the power tool or changing ac- cessories. Accidents can occur when power tools are started unintentionally.

u Assemble the saw stand properly before mounting the power tool. Correct assembly is important to prevent the risk of collapsing.

u Firmly secure the power tool to the saw stand before using it. You may lose control of the power tool if it slips on the saw stand.

u Place the saw stand on a firm, flat, horizontal surface. If there is a chance that the saw stand will slip or wobble, the safe and steady machining of the workpiece cannot be guaranteed.

u Do not overload the saw stand or climb or stand on it. Overloading or standing on the saw stand can raise its centre of gravity, causing it to tip over.

u Ensure that all screws and connecting pieces are tightly fastened during transport and when carrying out work. Loose connections can cause instability and in- accurate sawing.

u Only install and remove the power tool when it is in the transport position (for information on the trans- port position, also refer to the operating instructions for the relevant power tool). Otherwise the power tool may have an such unfavourable centre of gravity that you will not be able to hold onto it securely.

u Operate the power tool secured to the mounting plate on the saw stand only. Without the saw stand, the mounting plate with the power tool will not be stable and can tip over.

u Ensure that long and heavy workpieces do not unbal- ance the saw stand. The free end of long and heavy workpieces must have something placed underneath it or be supported.

u When folding or unfolding the saw stand, keep your fingers away from hinge areas. There is a risk of fingers being crushed.

Symbols The following symbols may provide you with important in- formation about the use of your saw stand. Please take note of these symbols and their meaning. Knowing what these symbols mean will help you to use your saw stand more ef- fectively and more safely. Symbols and their meaning

180 kg

The maximum load bearing capacity (power tool + workpiece) of the saw stand is 180 kg.

Product description and specifications Intended Use The saw stand is intended for holding the following Bosch benchtop saws (stand 2020.10): GTS 10 (3 601 L30 2..) GTS 10 J (3 601 M30 5..) GTS 10 XC (3 601 L30 4..) GTS 635-216 (3 601 M42 0..) GTS 18V-216 (3 601 M44 0..) The saw stand and power tool are intended for cutting boards and profiles. The saw stand is also suitable for various competitor products (see "Securing the Power Tool to the Mounting Plate (see figure G)", page 9).

Product Features The numbering of the components shown refers to the illus- trations on the graphics pages at the beginning of the manual. (1) Mounting plate (2) Locking mechanism (3) Handle (4) Lock bolt (5) Height-adjustable foot (6) Upper frame with locking mechanism (7) Lower frame (8) Wheel (9) Linkage bar (10) Foot support (11) Fastening set (12) Wing nut

Technical Data Saw stand GTA 60 W Article number 0 601 B12 0..

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

English | 9

Saw stand GTA 60 W Saw stand height mm 622 Max. load bearing capacity (power tool + workpiece)

kg 180

Weight according to EPTA-Pro- cedure 01:2014

kg 24

Assembly Items included

See the list of items included at the start of the operating manual.

Check to ensure that all the parts listed below have been supplied before assembling the saw stand: No. Designation Quant-

ity (1) Mounting plate 1 (6) Upper frame with locking mechanism (2) 1 (7) Lower frame 1 (8) Wheel with linkage bar (9) 2 (10) Foot support 1 (11) Fastening set consisting of:

Hexagon screws M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Cross-head screws M8 x 5

  6

Washers M10 M10 (clamp disc) M6

  18

2 8

Lock nuts M10 M8 M6

  6 6 4

Extra tools required (not included in the delivery): Cross-headed screwdriver Spanner (10 mm, 8 mm, 6 mm)

Assembling the Mobile Base Unit Carefully remove all parts included in the delivery from

their packaging. Remove all packing material. For assembly, follow figures A  E.

For figure A: Screw together the upper frame (6) and the lower

frame (7).

For figure B: Screw the left and right wheels (8) onto the upper

frame (6). When doing so, ensure that the linkage bars (9) are facing outwards and that the tyres of the wheels are facing towards the lower frame (7). Note: Do not over-tighten the nuts. The screwed-together parts must be able to move freely.

For figure C: Screw together the foot support (10) and the two

wheels (8).

For figure D: Screw the mounting plate (1) on both sides to the upper

frame (6). Note: Do not over-tighten the nuts. The screwed-together parts must be able to move freely.

For figure E: Screw the left and right linkage bars (9) onto the mount-

ing plate (1). Note: Do not over-tighten the nuts. The screwed-together parts must be able to move freely.

Preparing the Saw Stand Setting up the Saw Stand (see figure F) Before securing the power tool, you must pull the base unit apart. To release the lock bolts (4), gently pull the saw stand up-

wards by the handle (3). Open the locking mechanism (2). This retracts the lock

bolts which lock the wheels. Place one foot on the foot support (10) and push the

handle (3) downwards with both hands until the lock bolts engage again.

Close the locking mechanism (2). The height-adjustable feet (5) will help you to straighten the saw stand. Undo the wing nuts (12) and screw in/out the feet until

the saw stand is level.

Securing the Power Tool to the Mounting Plate (see figure G) The mounting plate (1) is suitable for general use. The vari- ous different mounting holes allow both Bosch power tools and competitor products to be mounted on the saw stand.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

10 | Franais

JJ

J

I

Manufac- turer

Model Mounting hole

Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWalt DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Position the power tool over the corresponding mounting holes.

Screw together the mounting plate and power tool using the compatible screws, washers and nuts.

Operation Working Advice Before commencing work, ensure that the locking mechanism (2) is always closed. Always hold the workpiece firmly in place, especially long, heavy pieces. Once the workpiece has been cut, the centre of gravity may be displaced, causing the saw stand to tip over. Do not overload the saw stand. Always observe the max- imum load bearing capacity of the saw stand.

Transport (see figure H) You must fold the base unit together for transport. To release the lock bolts (4), gently push the saw stand

downwards by the handle (3). Open the locking mechanism (2).

This retracts the lock bolts which lock the wheels. Place one foot on the foot support (10) and pull the

handle (3) upwards with both hands until the lock bolts engage again.

Close the locking mechanism (2).

Maintenance and Service After-Sales Service and Application Service Our after-sales service responds to your questions concern- ing maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessor- ies. In all correspondence and spare parts orders, please always include the 10digit article number given on the nameplate of the product.

Malaysia Robert Bosch Sdn. Bhd.(220975-V) PT/SMY No. 8A, Jalan 13/6 46200 Petaling Jaya Selangor Tel.: (03) 79663194 Toll-Free: 1800 880188 Fax: (03) 79583838 E-Mail: kiathoe.chong@my.bosch.com www.bosch-pt.com.my

You can find further service addresses at: www.bosch-pt.com/serviceaddresses

Disposal Saw stands, accessories and packaging should be recycled in an environmentally responsible manner.

Franais Consignes de scurit Consignes de scurit gnrales

Lisez tous les avertissements et instructions joints au support de travail ou loutil lec- troportatif monter. Le non-respect des ins- tructions et consignes de scurit peut provo- quer un choc lectrique, un incendie et/ou en- traner de graves blessures.

Consignes de scurit pour supports de travail u Dbranchez loutil lectroportatif de la prise secteur

et/ou retirez laccu avant de procder des rglages et des changements daccessoires. La mise en route intempestive des outils lectroportatifs est une cause fr- quente daccident.

u Installez correctement le support de travail avant de fixer loutil lectroportatif. Un montage correct est pri-

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Franais | 11

mordial pour disposer dune bonne stabilit et exclure tout effondrement du support.

u Fixez loutil lectroportatif de manire stable et sre sur le support de travail avant de lutiliser. Un outil lectroportatif qui glisse sur le support de travail peut en- traner une perte de contrle.

u Placez le support de travail sur un sol ferme, plan et horizontal. Si le support de travail risque de se dplacer ou de basculer, il nest pas possible de scier en toute s- curit et de bien guide la pice.

u Ne surchargez pas le support de travail et ne lutilisez pas en tant que marche-pied ou escabeau. Si vous sur- chargez le support de travail ou montez dessus, il risque de se renverser du fait que son centre de gravit se d- place alors vers le haut.

u Veillez ce que toutes les vis et tous les lments dassemblage soient bien serrs lors du transport et de lutilisation de loutil lectroportatif. Un serrage in- suffisant des lments dassemblage est source dinstabi- lit et dimprcision lors des sciages.

u Ninstallez et ne retirez loutil lectroportatif que lors- quil se trouve en position de transport (rfrez-vous pour cela la notice dutilisation de loutil lectropor- tatif en question). Le centre de gravit de loutil lectro- portatif risque sinon dtre mal plac, ce qui le rend in- stable et difficile tenir.

u Nutilisez loutil lectroportatif fix sur la plaque de montage que sur le support de travail. Sans le support de travail, la plaque de montage avec loutil lectroporta- tif nest pas stable et peut basculer.

u Assurez-vous que les pices longues et lourdes ne ds- quilibrent pas le support de travail. Les pices longues et lourdes doivent tre soutenues par des cales ou autre au niveau de leur extrmit libre.

u Napprochez pas vos doigts des points darticulation lorsque vous pliez ou dpliez le support de travail. Vous pourriez vous coincer les doigts.

Symboles Les symboles suivants peuvent tre importants pour lutilisa- tion de votre support de travail. Veuillez mmoriser les sym- boles et leur signification. Linterprtation correcte des sym- boles vous aidera mieux utiliser votre support de travail et en toute scurit. Symboles et leur signification

180 kg

La capacit de charge maximale (outil lectroportatif + pice) du support de travail est de 180 kg.

Description des prestations et du produit Utilisation conforme Le support de travail est conu pour supporter les scies sta- tionnaires Bosch suivantes (tat : 2020.10) : GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) Le support de travail est conu pour sectionner des planches et des profils en combinaison avec loutil lectroportatif. Le support de travail est galement utilisable pour supporter des outils lectroportatifs de marques concurrentes (voir  Fixation de loutil lectroportatif sur la plaque de montage (voir figure G) , Page 12).

lments constitutifs La numrotation des lments se rfre aux reprsentations sur les pages graphiques situes en dbut de notice. (1) Plaque de montage (2) Verrouillage (3) Poigne (4) Goupille de blocage (5) Pied rglable en hauteur (6) Cadre suprieur avec verrouillage (7) Cadre infrieur (8) Roue (9) Biellette de liaison (10) Traverse (11) Set de fixation (12) crou oreilles

Caractristiques techniques Support de travail GTA 60 W Rfrence 0 601 B12 0.. Hauteur du support de travail mm 622 Capacit de charge max. (outil lectroportatif + pice)

kg 180

Poids selon EPTA-Proce- dure 01:2014

kg 24

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

12 | Franais

Montage Accessoires fournis

Reportez-vous la reprsentation du conte- nu, dans les pages graphiques qui se trouvent en dbut de notice.

Avant de monter le support de travail, vrifiez quaucune des pices indiques ci-dessous ne manque : N Dsignation Nombr

e (1) Plaque de montage 1 (6) Cadre suprieur avec verrouillage (2) 1 (7) Cadre infrieur 1 (8) Roue avec biellette de liaison (9) 2 (10) Traverse 1 (11) Set de fixation comprenant :

Vis tte hexagonale M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Vis empreinte cruciforme M8 x 5

  6

Rondelles M10 M10 (rondelle de serrage) M6

  18

2 8

crous de blocage M10 M8 M6

  6 6 4

Dautres outils ncessaires, pas fournis avec loutil : Tournevis cruciforme Cls plates (10 mm, 8 mm, 6 mm)

Montage du socle mobile Sortez avec prcaution de lemballage toutes les pices

fournies. Enlevez tout le matriel demballage. Pour le montage, suivez les figures A  E.

Image A : Assemblez le cadre suprieur (6) et le cadre infrieur (7)

avec les vis.

Image B : Vissez la roue gauche et la roue droite (8) sur le cadre su-

prieur (6). Veillez ce que les biellettes de liaison (9) soient orientes vers lextrieur et ce que les pneus des roues soient orien- ts en direction du cadre infrieur (7).

Remarque : Ne serrez pas les crous fond. Les lments visss doivent pouvoir bouger librement.

Image C : Vissez la traverse (10) aux deux roues (8).

Image D : Vissez de chaque ct la plaque de montage (1) au cadre

suprieur (6). Remarque : Ne serrez pas les crous fond. Les lments visss doivent pouvoir bouger librement.

Image E : Vissez gauche et droite la biellette de liaison (9) la

plaque de montage (1). Remarque : Ne serrez pas les crous fond. Les lments visss doivent pouvoir bouger librement.

Prparation du support de travail Installation du support de travail (voir figure F) Avant de fixer loutil lectroportatif, vous devez dployer le socle. Pour dlester les goupilles de blocage (4), saisissez le

support de travail par la poigne (3) et tirez-le lgrement vers le haut.

Ouvrez le verrouillage (2). Cela a pour effet de librer les goupilles de blocage qui bloquent les roues.

Mettez un pied sur la traverse (10) et poussez avec les deux mains la poigne (3) vers le bas jusqu ce que les goupilles de blocage senclenchent nouveau.

Fermez le verrouillage (2). Les pieds rglables en hauteur (5) aident stabiliser et mettre niveau le support de travail. Desserrez les crous oreilles (12) et vissez ou dvissez

les pieds jusqu ce que le support de travail soit parfaite- ment lhorizontale.

Fixation de loutil lectroportatif sur la plaque de montage (voir figure G) La plaque de montage (1) peut tre utilise de manire uni- verselle. Les diffrents orifices de montage permettent de fixer sur le support de travail aussi bien des outils lectro- portatifs Bosch que des outils de marques concurrentes.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Portugus | 13

JJ

J

I

Fabricant Modle Orifice de montage Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Positionnez loutil lectroportatif en face des orifices de montage appropris.

Fixez loutil lectroportatif sur la plaque de montage avec les vis, rondelles et crous adquats.

Utilisation Instructions dutilisation Assurez-vous avant chaque travail que le verrouillage (2) est bien ferm. Tenez toujours fermement la pice, surtout la partie plus longue qui est la plus lourde. Aprs avoir sectionn la pice, le support de travail risque de basculer du fait d'un dplace- ment dfavorable du centre de gravit. Ne surchargez pas le support de travail. Respectez toujours la capacit de charge maximale du support de travail.

Transport (voir figure H) Pour le transport, vous devez replier le socle. Pour dlester les goupilles de blocage (4), saisissez le

support de travail par la poigne (3) et poussez-le lgre- ment vers le bas.

Ouvrez le verrouillage (2). Cela a pour effet de librer les goupilles de blocage qui bloquent les roues.

Mettez un pied sur la traverse (10) et poussez avec les deux mains la poigne (3) vers le haut jusqu ce que les goupilles de blocage senclenchent nouveau.

Fermez le verrouillage (2).

Entretien et Service aprsvente Service aprs-vente et conseil utilisateurs Notre Service aprs-vente rpond vos questions concer- nant la rparation et lentretien de votre produit et les pices de rechange. Vous trouverez des vues clates et des infor- mations sur les pices de rechange sur le site : www.bosch- pt.com Lquipe de conseil utilisateurs Bosch se tient votre dispo- sition pour rpondre vos questions concernant nos pro- duits et leurs accessoires. Pour toute demande de renseignement ou toute commande de pices de rechange, prcisez imprativement la rf- rence 10 chiffres figurant sur ltiquette signaltique du produit.

Maroc Robert Bosch Morocco SARL 53, Rue Lieutenant Mahroud Mohamed 20300 Casablanca Tel.: +212 5 29 31 43 27 E-Mail : sav.outillage@ma.bosch.com

Vous trouverez d'autres adresses du service aprs-vente sous : www.bosch-pt.com/serviceaddresses

limination des dchets Prire de rapporter les supports de travail, accessoires et emballages dans un Centre de recyclage respectueux de len- vironnement.

Portugus Instrues de segurana Advertncias gerais de segurana

Leia todas as indicaes de aviso e instrues fornecidas com a mesa de trabalho ou da ferramenta eltrica a montar. A inobservncia das indicaes e instrues de segurana pode causar choque eltrico, incndio e/ou ferimentos graves.

Instrues de segurana para mesas de trabalho u Retire a ficha da tomada e/ou retire a bateria da

ferramenta eltrica antes de efetuar ajustes no aparelho ou trocar acessrios. Um arranque

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

14 | Portugus

involuntrio de ferramentas eltricas a causa de alguns acidentes.

u Montar corretamente a mesa de trabalho, antes de montar a ferramenta eltrica. Uma montagem perfeita importante para evitar o risco de desmoronamento.

u Fixe a ferramenta eltrica de forma segura na mesa de trabalho, antes de a usar. Um deslize da ferramenta eltrica na mesa de trabalho pode causar perda de controlo.

u Coloque a mesa de trabalho sobre uma superfcie fixa, plana e horizontal. Se a mesa de trabalho puder se deslocar ou balanar, a pea a ser trabalhada no poder ser conduzida uniformemente.

u No sobrecarregue a mesa de trabalho, nem a use como escadote ou armao. Se sobrecarregar ou se subir na mesa de trabalho, poder ser que o centro de gravidade se desloque para cima e que a mesa tombe.

u Ao transportar e ao trabalhar, certifique-se de que todos os parafusos e elemento de unio esto bem apertados. Unies soltas podem levar a instabilidades e a processos de corte imprecisos.

u Monte e desmonte a ferramenta eltrica apenas quando esta estiver na posio de transporte (para as indicaes sobre a posio de transporte ver tambm o manual de instrues da respetiva ferramenta eltrica). Caso contrrio, a ferramenta eltrica pode ter um centro de gravidade to desfavorvel que no a consegue segurar de forma segura.

u Opere a ferramenta eltrica fixa na placa de montagem exclusivamente na mesa de trabalho. Sem a mesa de trabalho, a placa de montagem com a ferramenta eltrica no fica segura e pode tombar.

u Assegure-se de que peas compridas e pesadas no desequilibram a mesa de trabalho. Apoie ou escore as extremidades de peas compridas e pesadas.

u Ao juntar ou separar a mesa de trabalho, no coloque os dedos prximos de pontos de articulao. Os dedos poderiam ser esmagados.

Smbolos Os seguintes smbolos podem ser importantes para a utilizao da sua mesa de trabalho. Os smbolos e os seus significados devem ser memorizados. A correta interpretao dos smbolos ajuda-o a utilizar a mesa de trabalho melhor e com mais segurana. Smbolos e seus significados

180 kg

A capacidade mx. de carga (ferramenta eltrica + pea) da mesa de trabalho de 180 kg.

Descrio do produto e do servio Utilizao adequada A mesa de trabalho destina-se a suportar as seguintes serras estacionrias da Bosch (verso 2020.10): GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) Combinada com a ferramenta eltrica, a mesa de trabalho destina-se a cortar no comprimento certo tbuas e perfis. A mesa de trabalho tambm apropriada para diversos produtos da concorrncia (ver "Fixar a ferramenta eltrica na placa de montagem (ver figura G)", Pgina 15).

Componentes ilustrados A numerao dos componentes exibidos diz respeito s representaes existentes nas pginas dos grficos no incio do manual. (1) Placa de montagem (2) Bloqueio (3) Punho (4) Pino de bloqueio (5) P regulvel na vertical (6) Estrutura superior com bloqueio (7) Estrutura inferior (8) Roda (9) Escora de ligao (10) Apoio dos ps (11) Conjunto de fixao (12) Porca de orelhas

Dados tcnicos Mesa de trabalho GTA 60 W Nmero de produto 0 601 B12 0.. Altura da mesa de trabalho mm 622 Capacidade mx. de carga (ferramenta eltrica + pea)

kg 180

Peso conforme EPTA- Procedure 01:2014

kg 24

Montagem Volume de fornecimento

Observe a este respeito a figura do material a fornecer no incio do manual de instrues.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Portugus | 15

Antes de montar a mesa de trabalho, dever verificar se todas as peas especificadas abaixo foram fornecidas: N. Designao Nmer

o (1) Placa de montagem 1 (6) Estrutura superior com bloqueio (2) 1 (7) Estrutura inferior 1 (8) Roda com escora de ligao (9) 2 (10) Apoio dos ps 1 (11) Conjunto de fixao composto por:

Parafusos sextavados M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Parafusos de fenda em cruz M8 x 5

  6

Anilhas M10 M10 (disco de fixao) M6

  18

2 8

Porcas de bloqueio M10 M8 M6

  6 6 4

Ferramentas necessrias alm das fornecidas: Chave de estrela Chave de bocas (10 mm, 8 mm, 6 mm)

Montar a base mvel Retire todas as peas fornecidas cuidadosamente das

respetivas embalagens. Remova todo o material de embalagem. Para a montagem siga as imagens A  E.

sobre a imagem A: Aparafuse a estrutura superior (6) estrutura

inferior (7).

sobre a imagem B: Aparafuse as rodas esquerda e direita (8) respetivamente

com a estrutura superior (6). Certifique-se de que as escoras de ligao (9) apontam para fora e os pneus das rodas apontam em direo estrutura inferior (7). Nota: No aperte muito as porcas. As peas aparafusadas tm de poder mover-se livremente.

sobre a imagem C: Aparafuse o apoio dos ps (10) s duas rodas (8).

sobre a imagem D: Aparafuse a placa de montagem (1) de ambos os lados

estrutura superior (6).

Nota: No aperte muito as porcas. As peas aparafusadas tm de poder mover-se livremente.

sobre a imagem E: Aparafuse as escoras de ligao esquerda e direita (9)

respetivamente placa de montagem (1). Nota: No aperte muito as porcas. As peas aparafusadas tm de poder mover-se livremente.

Preparar a mesa de trabalho Instalar a mesa de trabalho (ver figura F) Antes de fixar a ferramenta eltrica tem de abrir a base. Para aliviar o pino de bloqueio (4) puxe ligeiramente a

mesa de trabalho para cima pelo punho (3). Abra o bloqueio (2). Com isto, os pinos de bloqueio que

prendem as rodas so recuados. Coloque um p no apoio dos ps (10) e pressione com as

duas mos o punho (3) para baixo at que os pinos de bloqueio tornem a engatar.

Feche o bloqueio (2). Os ps regulveis na vertical (5) ajudam-no a alinhar a mesa de trabalho. Solte as porcas de orelhas (12) e enrosque ou

desenrosque os ps at que a mesa de trabalho esteja alinhada.

Fixar a ferramenta eltrica na placa de montagem (ver figura G) A placa de montagem (1) de aplicao universal. Devido aos diferentes orifcios de montagem, a mesa de trabalho tanto compatvel com as ferramentas eltricas Bosch como com produtos da concorrncia.

JJ

J

I

Fabricante Modelo Orifcio de montagem Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

16 | Espaol

Fabricante Modelo Orifcio de montagem Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Posicione a ferramenta eltrica nos orifcios de montagem adequados.

Aparafuse a placa de montagem e a ferramenta eltrica com os parafusos, anilhas e porcas adequados.

Funcionamento Instrues de trabalho Antes de iniciar os trabalhos, certifique-se sempre de que o bloqueio (2) est fechado. Segure sempre firmemente a pea a ser trabalhada, especialmente o pedao mais longo e mais pesado. Aps cortar a pea a ser trabalhada possvel que o centro de gravidade se desloque desfavoravelmente, de modo que a mesa de trabalho tombe. No sobrecarregue a mesa de trabalho. Observe sempre a capacidade portante mxima da mesa de trabalho.

Transporte (ver figura H) Para o transporte tem de fechar a base. Para aliviar o pino de bloqueio (4) pressione ligeiramente

a mesa de trabalho para baixo pelo punho (3). Abra o bloqueio (2).

Com isto, os pinos de bloqueio que prendem as rodas so recuados.

Coloque um p no apoio dos ps (10) e puxe com as duas mos o punho (3) para cima at que os pinos de bloqueio tornem a engatar.

Feche o bloqueio (2).

Manuteno e assistncia tcnica Servio ps-venda e aconselhamento O servio ps-venda responde s suas perguntas a respeito de servios de reparao e de manuteno do seu produto, assim como das peas sobressalentes. Desenhos explodidos e informaes acerca das peas sobressalentes tambm em: www.bosch-pt.com A nossa equipa de consultores Bosch esclarece com prazer todas as suas dvidas a respeito dos nossos produtos e acessrios. Indique para todas as questes e encomendas de peas sobressalentes a referncia de 10 dgitos de acordo com a placa de caratersticas do produto.

Brasil Robert Bosch Ltda. Diviso de Ferramentas Eltricas Rodovia Anhanguera, Km 98 - Parque Via Norte 13065-900, CP 1195 Campinas, So Paulo

Tel.: 0800 7045 446 www.bosch.com.br/contato

Encontra outros endereos da assistncia tcnica em: www.bosch-pt.com/serviceaddresses

Eliminao As mesas de trabalho, acessrios e embalagens devem ser enviados a uma reciclagem ecolgica de matria-prima.

Espaol Indicaciones de seguridad Indicaciones de seguridad generales

Lea todas las indicaciones de advertencia e instrucciones de la mesa de trabajo o inclui- das en la herramienta elctrica que va a montar. El incumplimiento de las indicaciones de seguridad y de las instrucciones pueden causar descargas elctricas, incendios y/o le- siones graves.

Indicaciones de seguridad para mesas de trabajo u Retire el conector de la toma de corriente y/o extraiga

la batera de la herramienta elctrica antes de realizar ajustes en el aparato o sustituir accesorios. La puesta en marcha accidental de la herramienta elctrica puede provocar accidentes.

u Ensamble correctamente la mesa de trabajo antes de montar la herramienta elctrica. Un montaje adecuado es importante para evitar el riesgo de derrumbe.

u Fije la herramienta elctrica de forma segura sobre la mesa de trabajo antes de utilizarla. Podra perder el control sobre la herramienta elctrica si sta no va co- rrectamente sujeta a la mesa de trabajo.

u Fije la mesa de trabajo a una superficie firme, lisa y horizontal. Si la mesa de trabajo se desplaza sobre la ba- se o tambalea, no es posible guiar uniformemente ni de forma segura la pieza.

u No sobrecargue la mesa de trabajo y no la utilice como escalera o andamio. Al sobrecargar o subirse a la mesa de trabajo puede ocurrir que sta vuelque.

u Asegrese de que todos los tornillos y elementos de unin estn bien apretados durante el transporte y en los trabajos. Una sujecin deficiente puede provocar una inestabilidad y un serrado inexacto.

u Monte y desmonte la herramienta elctrica slo cuan- do est en la posicin de transporte (para las indica- ciones sobre la posicin de transporte vea tambin las instrucciones de servicio de la respectiva herramienta elctrica). De lo contrario, la herramienta elctrica pue-

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Espaol | 17

de tener un centro de gravedad tan desfavorable que no la pueda sostener con seguridad.

u Opere la herramienta elctrica montada en la placa de montaje slo en la mesa de trabajo. Sin la mesa de tra- bajo, la placa de montaje con la herramienta elctrica no est asegurada y puede volcarse.

u Asegrese de que las piezas de trabajo largas y pesa- das no perturben el equilibrio de la mesa de trabajo. En las piezas de trabajo largas y pesadas, su extremo libre deber sostenerse convenientemente.

u Cuando empuje o separe la mesa de trabajo, no acer- que los dedos en los puntos de articulacin. Sus dedos podran ser magullados.

Smbolos Los smbolos mostrados a continuacin pueden ser de im- portancia en el uso de la mesa de trabajo. Es importante que retenga en su memoria estos smbolos y su significado. La in- terpretacin correcta de estos smbolos le ayudar a mane- jar mejor, y de forma ms segura, la mesa de trabajo. Simbologa y su significado

180 kg

La capacidad de carga mxima (herra- mienta elctrica + pieza de trabajo) de la mesa de trabajo es de 180 kg.

Descripcin del producto y servicio Utilizacin reglamentaria La mesa de trabajo ha sido concebida para alojar las siguien- tes sierras estacionarias de Bosch (ltima actualizacin 2020.10): GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) La mesa de trabajo, en combinacin con la herramienta elc- trica, ha sido concebida para cortar a longitud tablas y perfi- les. La mesa de trabajo tambin es adecuada para varios produc- tos de la competencia (ver "Fijar la herramienta elctrica so- bre la placa de montaje (ver figura G)", Pgina 18).

Componentes principales La numeracin de los componentes representados hace re- ferencia a las figuras de las pginas de grficos que aparecen al inicio de las instrucciones. (1) Placa de montaje (2) Enclavamiento (3) Empuadura (4) Perno de bloqueo

(5) Pie ajustable en altura (6) Bastidor superior con enclavamiento (7) Bastidor inferior (8) Rueda (9) Tirante de unin (10) Apoyo de pi (11) Juego de piezas de sujecin (12) Tuerca de mariposa

Datos tcnicos Mesa de trabajo GTA 60 W Nmero de artculo 0 601 B12 0.. Altura de la mesa de trabajo mm 622 Capacidad de carga mx. (he- rramienta elctrica + pieza de trabajo)

kg 180

Peso segn EPTA-Procedu- re 01:2014

kg 24

Montaje Suministro de serie

Observe la representacin del volumen de suministro al comienzo de las instrucciones de servicio.

Antes de montar la mesa de trabajo compruebe si se han su- ministrado todas las partes que a continuacin se detallan: Nm .

Descripcin Canti- dad

(1) Placa de montaje 1 (6) Bastidor superior con enclavamiento (2) 1 (7) Bastidor inferior 1 (8) Rueda con tirante de unin (9) 2 (10) Apoyo de pi 1 (11) Juego de piezas de sujecin integrado por:

Tornillos hexagonales M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Tornillos con ranura en cruz M8 x 5

  6

Arandelas M10 M10 (arandela de sujecin) M6

  18

2 8

Tuercas de seguridad M10

  6

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

18 | Espaol

Nm .

Descripcin Canti- dad

M8 M6

6 4

Herramientas necesarias que no se suministran con el aparato: Destornillador de cruz Llave para tuercas (10 mm, 8 mm, 6 mm)

Montaje del bastidor inferior mvil Saque cuidadosamente del embalaje todas las partes su-

ministradas. Desembale las piezas completamente. Para el montaje siga las figuras A  E.

Figura A: Atornille el bastidor superior (6) con el bastidor inferior

(7).

Figura B: Atornille la rueda izquierda y la derecha (8) respectiva-

mente con el bastidor superior (6). Asegrese de que los tirantes de unin (9) apunten hacia afuera y los neumticos de las ruedas hacia el bastidor infe- rior (7). Indicacin: No apriete demasiado las tuercas. Las partes atornilladas deben poder moverse libremente.

Figura C: Atornille el apoyo de pie (10) con las dos ruedas (8).

Figura D: Atornille la placa de montaje (1) en ambos lados con el

bastidor superior (6). Indicacin: No apriete demasiado las tuercas. Las partes atornilladas deben poder moverse libremente.

Figura E: Atornille el tirante de unin izquierdo y el derecho (9) res-

pectivamente con la placa de montaje (1). Indicacin: No apriete demasiado las tuercas. Las partes atornilladas deben poder moverse libremente.

Preparacin de la mesa de trabajo Montaje de la mesa de trabajo (ver figura F) Antes de fijar la herramienta elctrica, debe desplegar el bastidor inferior. Para descargar los pernos de bloqueo (4), tire de la mesa

de trabajo ligeramente hacia arriba por el asidero (3). Abra el enclavamiento (2). Esto retrae los pernos de blo-

queo que bloquean las ruedas. Ponga un pie en el apoyo de pie (10) y, con ambas ma-

nos, presione hacia abajo el asidero (3), hasta que los pernos de bloqueo encastren de nuevo.

Cierre el enclavamiento (2). Los pies ajustables en altura (5) le ayudan a nivelar la mesa de trabajo.

Afloje las tuercas de mariposa (12) y atornille los pies ha- cia dentro o hacia fuera, hasta que la mesa de trabajo es- t nivelada.

Fijar la herramienta elctrica sobre la placa de montaje (ver figura G) La placa de montaje (1) es universalmente aplicable. Gra- cias a los diversos agujeros de montaje, la mesa de trabajo se puede utilizar para herramientas elctricas de Bosch as como productos de la competencia.

JJ

J

I

Fabricante Modelo Agujero de montaje Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Posicione la herramienta elctrica en los agujeros de montaje adecuados.

Atornille la placa de montaje y la herramienta elctrica con los tornillos, arandelas y tuercas adecuados.

Operacin Instrucciones para la operacin Asegrese de que el enclavamiento (2) est siempre cerrado ante de comenzar con el trabajo. En todo momento sujete con firmeza la pieza de trabajo, es- pecialmente el tramo que sea ms largo y pesado. Una vez dividida la pieza, el centro de gravedad puede modificarse en tal medida que la mesa de trabajo llegue a volcar. No sobrecargue la mesa de trabajo. Siempre tenga en cuenta la capacidad de carga mxima de la mesa de trabajo.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Portugus do Brasil | 19

Transporte (ver figura H) Para el transporte tiene que plegar el bastidor inferior. Para descargar los pernos de bloqueo (4), presione la

mesa de trabajo ligeramente hacia abajo por el asidero (3).

Abra el enclavamiento (2). Esto retrae los pernos de bloqueo que bloquean las rue- das.

Ponga un pie en el apoyo de pie (10) y, con ambas ma- nos, tire hacia arriba el asidero (3), hasta que los pernos de bloqueo encastren de nuevo.

Cierre el enclavamiento (2).

Mantenimiento y servicio Servicio tcnico y atencin al cliente El servicio tcnico le asesorar en las consultas que pueda Ud. tener sobre la reparacin y mantenimiento de su produc- to, as como sobre piezas de recambio. Las representacio- nes grficas tridimensionales e informaciones de repuestos se encuentran tambin bajo: www.bosch-pt.com El equipo asesor de aplicaciones de Bosch le ayuda gustosa- mente en caso de preguntas sobre nuestros productos y sus accesorios. Para cualquier consulta o pedido de piezas de repuesto es imprescindible indicar el n de artculo de 10 dgitos que fi- gura en la placa de caractersticas del producto.

Mxico Robert Bosch S. de R.L. de C.V. Calle Robert Bosch No. 405 C.P. 50071 Zona Industrial, Toluca - Estado de Mxico Tel.: (52) 55 528430-62 Tel.: 800 6271286 www.bosch-herramientas.com.mx

Direcciones de servicio adicionales se encuentran bajo: www.bosch-pt.com/serviceaddresses

Eliminacin Las mesas de trabajo, los accesorios y los embalajes debe- rn someterse a un proceso de reciclaje respetuoso con el medioambiente.

Portugus do Brasil Indicaes de segurana Indicaes gerais de segurana

Leia todas indicaes de aviso e instrues fornecidas junto com a mesa de trabalho ou com a ferramenta eltrica a montar. O desrespeito das indicaes de segurana e das

instrues apresentadas abaixo pode causar choque eltrico, incndio e/ou graves leses.

Indicaes de segurana para mesas de trabalho u Retire o plugue da tomada e/ou remova a bateria da

ferramenta eltrica antes de executar ajustes na ferramenta ou de substituir acessrios. O arranque involuntrio das ferramentas eltricas a causa de alguns acidentes.

u Monte corretamente a mesa de trabalho, antes de colocar a ferramenta eltrica. Uma montagem correta importante para evitar o risco de avaria.

u Fixe a ferramenta eltrica mesa de trabalho de forma segura antes de a utilizar. Se a ferramenta eltrica escorregar na mesa de trabalho, tal pode causar a perda de controle.

u Coloque a mesa de trabalho sobre uma superfcie estvel, plana e horizontal. Se a mesa de trabalho balanar ou for possvel deslizar a mesma, a pea no pode ser conduzida de forma segura e uniforme.

u No sobrecarregue a mesa de trabalho, nem a use como escada ou armao. Se sobrecarregar ou se subir na mesa de trabalho, o centro de gravidade da mesa de trabalho pode se deslocar para cima e pode tombar.

u Para o transporte e para os trabalhos, certifique-se de que todos os parafusos e elementos de unio esto bem apertados. As unies frouxas podem causar instabilidades e processos de serragem imprecisos.

u Monte e desmonte a ferramenta eltrica somente quando esta estiver na posio de transporte (para as indicaes sobre a posio de transporte veja tambm o manual de instrues da respectiva ferramenta eltrica). Caso contrrio, a ferramenta eltrica pode ter um centro de gravidade to desfavorvel que no a consegue segurar de forma segura.

u Opere a ferramenta eltrica fixa na placa de montagem exclusivamente sobre a mesa de trabalho. Sem a mesa de trabalho, a placa de montagem com a ferramenta eltrica no fica segura e pode tombar.

u Certifique-se de que as peas compridas e pesadas no desequilibram a mesa de trabalho. As peas compridas e pesadas devem ser apoiadas na extremidade livre.

u Ao abrir ou fechar a mesa de trabalho no coloque os seus dedos prximos dos pontos de articulao. Os dedos podem ser esmagados.

Smbolos Os seguintes smbolos podem ser importantes para a utilizao da sua mesa de trabalho. Memorize os smbolos e o respetivo significado. A interpretao correta dos smbolos ajuda voc a usar melhor e de forma mais segura a mesa de trabalho.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

20 | Portugus do Brasil

Smbolos e seus respetivos significados

180 kg

A capacidade mxima de carga (ferramenta eltrica + pea) da mesa de trabalho de 180 kg.

Descrio do produto e especificaes Utilizao adequada A mesa de trabalho compatvel com as seguintes serras estacionrias da Bosch (verso 2020.10): GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) Juntamente com a ferramenta eltrica, a mesa de trabalho destina-se a cortar tbuas e perfis no comprimento certo. A mesa de trabalho tambm indicada para diversos produtos da concorrncia (ver "Fixar a ferramenta eltrica na placa de montagem (ver figura G)", Pgina 21).

Componentes ilustrados A numerao dos componentes ilustrados refere-se apresentao nas pginas de esquemas no incio do manual. (1) Placa de montagem (2) Trava (3) Punho (4) Pino de bloqueio (5) P regulvel em altura (6) Estrutura superior com travamento (7) Estrutura inferior (8) Roda (9) Suporte de conexo (10) Apoio para os ps (11) Conjunto de fixao (12) Porca de orelhas

Dados tcnicos Mesa de trabalho GTA 60 W Nmero de produto 0 601 B12 0.. Altura da mesa de trabalho mm 622 Capacidade mx. de carga (ferramenta eltrica + pea)

kg 180

Peso conforme EPTA- Procedure 01:2014

kg 24

Montagem Volume de fornecimento

Observe a representao do volume de fornecimento no incio do manual de instrues.

Antes de montar a mesa de trabalho, verifique se todas as peas listadas abaixo foram fornecidas: N Descrio Nmer

o (1) Placa de montagem 1 (6) Estrutura superior com travamento (2) 1 (7) Estrutura inferior 1 (8) Roda com suporte de conexo (9) 2 (10) Apoio para os ps 1 (11) Conjunto de fixao composto por:

Parafusos sextavados M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Parafusos de fenda em cruz M8 x 5

  6

Arruelas M10 M10 (disco de fixao) M6

  18

2 8

Porcas de reteno M10 M8 M6

  6 6 4

Ferramentas necessrias adicionais alm das fornecidas: Chave de fenda em cruz Chave de bocas (10 mm, 8 mm, 6 mm)

Monte a base mvel Retire com cuidado todas as peas de suas respectivas

embalagens. Remova todo o material de embalamento. Para a montagem siga as imagens A  E.

sobre a imagem A: Aparafuse a estrutura superior (6) com a estrutura

inferior (7).

sobre a imagem B: Aparafuse as rodas esquerda e direita (8)

respectivamente com a estrutura superior (6). Certifique-se de que os suportes de conexo (9) apontam para fora e os pneus das rodas em direo ao quadro inferior (7).

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Portugus do Brasil | 21

Nota: No aperte muito as porcas. As peas aparafusadas devem mover-se livremente.

sobre a imagem C: Aparafuse o apoio para os ps (10) com as duas

rodas (8).

sobre a imagem D: Aparafuse a placa de montagem (1) de ambos os lados

com a estrutura superior (6). Nota: No aperte muito as porcas. As peas aparafusadas devem mover-se livremente.

sobre a imagem E: Aparafuse os suportes de conexo esquerdo e direito (9)

cada um com a placa de montagem (1). Nota: No aperte muito as porcas. As peas aparafusadas devem mover-se livremente.

Preparar a mesa de trabalho Instalar a mesa de trabalho (ver figura F) Antes de conectar a ferramenta eltrica, voc deve deslizar a estrutura da base para separ-la. Para aliviar o pino de bloqueio (4) puxe ligeiramente a

mesa de trabalho para cima pelo punho (3). Abra a trava (2). Deste modo, os pinos de bloqueio que

prendem as rodas so recuados. Coloque um p no apoio para os ps (10) e pressione

com as duas mos o punho (3) para baixo at que os pinos de bloqueio voltem a engatar.

Feche a trava (2). Os ps regulveis em altura (5) ajudam voc a alinhar a mesa de trabalho. Solte as porcas de orelhas (12) e aparafuse os ps para

dentro ou para fora at que a mesa de trabalho esteja nivelada.

Fixar a ferramenta eltrica na placa de montagem (ver figura G) A placa de montagem (1) de utilizao universal. Devido aos diferentes furos de montagem, a mesa de trabalho compatvel com ferramentas eltricas Bosch e produtos da concorrncia.

JJ

J

I

Fabricante Modelo Furo de montagem Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Posicione a ferramenta eltrica nos furos de montagem adequados.

Aparafuse a placa de montagem e a ferramenta eltrica com os parafusos, arruelas e porcas adequados.

Funcionamento Indicaes de trabalho Antes de iniciar os trabalhos, se assegure que a trava (2) est fechada. Segure sempre bem a pea, especialmente em cortes compridos e pesados. Depois de cortar a pea, o centro de gravidade pode ficar to desfavorvel que a mesa de trabalho tomba. No sobrecarregue a mesa de trabalho. Tenha sempre ateno capacidade mxima de carga da mesa de trabalho.

Transporte (ver figura H) Para o transporte feche a base. Para aliviar o pino de bloqueio (4) pressione ligeiramente

a mesa de trabalho para baixo pelo punho (3). Abra a trava (2).Deste modo, os pinos de bloqueio que

prendem as rodas so recuados. Coloque um p no apoio para os ps (10) e puxe com as

duas mos o punho (3) para cima at que os pinos de bloqueio voltem a engatar.

Feche a trava (2).

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

22 |

Manuteno e servio Servio ps-venda e assistncia ao cliente O servio ps-venda responde s suas perguntas a respeito de servios de reparao e de manuteno do seu produto, assim como das peas sobressalentes. Desenhos explodidos e informaes sobre peas sobressalentes tambm em: www.bosch-pt.com A nossa equipe de consultores Bosch esclarece com prazer todas as suas dvidas a respeito dos nossos produtos e acessrios. Indique em todas as questes ou encomendas de peas sobressalentes impreterivelmente a referncia de 10 dgitos de acordo com a placa de caractersticas do produto.

Brasil Robert Bosch Ltda. Diviso de Ferramentas Eltricas Rodovia Anhanguera, Km 98 - Parque Via Norte 13065-900, CP 1195 Campinas, So Paulo Tel.: 0800 7045 446 www.bosch.com.br/contato

Encontre outros endereos da assistncia tcnica em: www.bosch-pt.com/serviceaddresses

Descarte Mesas de trabalho, acessrios e embalagens devem ser enviados a uma reciclagem ecolgica de matrias-primas.

/

u /

u

u

u

u

u

u

u

u

u

180 kg

+ 180

2020.10 GTS 103 601 L30 2.. GTS 10 J3 601 M30 5.. GTS 10 XC3 601 L30 4.. GTS 635-2163 601 M42 0.. ) GTS 18V-2163 601 M44 0.. ( G,  23)

(1) (2) (3) (4) (5)

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 23

(6) (7) (8) (9) (10) (11) (12)

GTA 60 W 0 601 B12 0.. 622 +

180

EPTA- Procedure 01:2014

24

(1) 1 (6) (2) 1 (7) 1 (8) (9) 2 (10 )

1

(11 )

M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

M8 x 5

  6

M10 M10 M6

  18

2 8

M10 M8 M6

  6 6 4

1086

AE A (6)(7) B (8)(6)

(9) (7) C (10)(8) D (1)(6) E (9)(1)

F (4)(3)

(2) (10)

(3) (2) (5) (12)

G (1)

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

24 |

JJ

J

I

GTS 10

GTS 10 XC GTS 10 J GTS 635-216 GTS 18V-216

B B J T T

DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

(2)

H (4)(3)

(2)

(10)

(3) (2)

www.bosch-pt.com 10 567 102/1F 310052 (0571)8887 5566 / 5588 (0571)8887 6688 x 5566# / 5588# bsc.hz@cn.bosch.com www.bosch-pt.com.cn Robert Bosch Power Tools GmbH 70538 Stuttgart / GERMANY 70538 / www.bosch-pt.com/serviceaddresses

u

u

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 25

u

u

u

u

u

u

u

u

180 kg

+ 180 kg

2020.10 GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) ( G,  26)

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

GTA 60 W 0 601 B12 0.. mm 622 +

kg 180

EPTA- Procedure 012014

kg 24

(1) 1 (6) (2) 1 (7) 1 (8) (9) 2 (10 )

1

(11 )

M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

26 |

M8 x 5

  6

M10 M10 M6

  18

2 8

M10 M8 M6

  6 6 4

10 mm8 mm6 mm

A  E A (6) (7)

B (8) (6)

(9) (7) C (10) (8) D (1) (6)

E (9)

(1)

F (4) (3)

(2)

(10) (3)

(2) (5) (12)

G (1)

JJ

J

I

GTS 10

GTS 10 XC GTS 10 J GTS 635-216 GTS 18V-216

B B J T T

DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

(2)

H

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 27

(3) (4)

(2)

(10) (3)

(2)

www.bosch-pt.com 10 90 6 10491 : (02) 7734 2588 : (02) 2516 1176 www.bosch-pt.com.tw : Robert Bosch Power Tools GmbH 70538 Stuttgart / GERMANY 70538 / www.bosch-pt.com/serviceaddresses

/

u /

u

u

u

u

u

u ( )

u

u

u

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

28 |

180 kg

( + ) 180 .

Bosch ( 2020.10) :: GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) ( " ( G)",  29).

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

GTA 60 W

0 601 B12 0..

. 622

( + )

. 180

EPTA- Procedure 01:2014

. 24

:

(1) 1

(6) (2) 1

(7) 1

(8) (9) 2

(10 )

1

(11 )

:

M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

M8 x 5

  6

M10

  18

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 29

M10 () M6

2 8

M10 M8 M6

  6 6 4

( ): (10 ., 8 ., 6 .)

A  E.

A: (6) (7)

B: (8) (6) (9) (7) :

C: (10) (8)

D: (1)

(6) :

E: (9)

(1) :

( F) (4)

(3) (2) (10)

(3) (2) (5) (12)

( G) (1) Bosch

JJ

J

I

Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

T

T

DeWALT DW744XP D

Metabo TS 250 Me

Makita 2703 M

Hitachi C 10 R A 2 H

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

30 | Bahasa Indonesia

(2)

( H) (4)

(3) (2)

(10)

(3) (2)

: www.bosch-pt.com 10

1 5 2525 4 10110 : +66 2012 8888 : +66 2064 5800 www.bosch.co.th

G 2 10/11 16 10540 02 7587555 02 7587525

: www.bosch-pt.com/serviceaddresses

Bahasa Indonesia Petunjuk keselamatan Petunjuk keselamatan umum

Baca semua petunjuk peringatan keamanan dan instruksi yang tercantum mengenai meja kerja atau perkakas listrik yang akan dipasang. Kelalaian dalam mengabaikan instruksi dan petunjuk keselamatan dapat menyebabkan sengatan listrik, kebakaran, dan/ atau cedera serius.

Petunjuk keselamatan untuk meja kerja u Lepaskan steker dari stopkontak dan/atau lepaskan

baterai dari perkakas listrik sebelum melakukan pengaturan pada perangkat atau mengganti aksesori. Perkakas listrik yang dinyalakan tanpa disengaja dapat mengakibatkan kecelakaan.

u Sebelum memasang perkakas listrik pada meja kerja, rakit terlebih dulu meja kerja dengan benar. Perakitan yang tepat sangat penting untuk mencegah meja kerja roboh.

u Pasang perkakas listrik ke meja kerja dengan aman sebelum digunakan. Perkakas listrik pada meja kerja dapat terlepas dan menyebabkan kehilangan kendali.

u Letakkan meja kerja di atas permukaan yang kokoh, datar, dan horizontal. Jika meja kerja dapat terlepas atau goyah, benda kerja tidak dapat diarahkan secara merata dan aman.

u Jangan membebani meja kerja dan jangan menggunakannya sebagai tangga atau perancah. Pemberian beban berlebih dan penggunaan meja kerja

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Bahasa Indonesia | 31

sebagai pijakan dapat menyebabkan titik berat meja kerja bergeser ke atas sehingga meja dapat terguling.

u Pastikan semua sekrup dan elemen penghubung telah dikencangkan dengan kuat selama pengangkutan dan pengerjaan. Penyambungan yang tidak kencang dapat menyebabkan ketidakstabilan dan proses penggergajian tidak akurat.

u Hanya pasang dan lepaskan perkakas listrik saat berada dalam posisi pengangkutan (petunjuk mengenai posisi pengangkutan dapat dilihat pada panduan pengoperasian untuk tiap-tiap perkakas listrik). Jika tidak, perkakas listrik dapat memiliki titik berat yang tidak menguntungkan sehingga perkakas tidak dapat dipegang dengan aman.

u Hanya operasikan perkakas listrik yang terpasang pada pelat pemasangan di atas meja kerja. Tanpa meja kerja, pelat pemasangan dengan perkakas listrik akan berdiri dengan tidak seimbang dan dapat terbalik.

u Pastikan benda kerja yang panjang dan berat tidak mengganggu keseimbangan meja kerja. Benda kerja yang panjang dan berat harus dialasi atau ditopang pada ujungnya.

u Jauhkan jari dari titik sambungan saat melipat atau membuka meja kerja. Jari dapat terjepit.

Simbol-simbol Simbol-simbol berikut dapat membantu selama penggunaan meja kerja. Pelajari dan ingat simbol-simbol berikut beserta artinya. Interpretasi yang tepat mengenai simbol tersebut dapat membantu Anda menggunakan meja kerja dengan aman dan lebih baik. Simbol dan artinya

180 kg

Kapasitas beban maksimal (perkakas listrik + benda kerja) meja kerja sebesar 180 kg.

Spesifikasi produk dan performa Tujuan penggunaan Meja kerja ini cocok untuk menopang gergaji stasioner Bosch berikut (per 2020.10): GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) Bersama dengan perkakas listrik, meja kerja cocok untuk memotong panjang papan dan profil. Meja kerja juga cocok untuk berbagai produk pesaing (lihat Mengencangkan perkakas listrik pada pelat pemasangan (lihat gambar G), Halaman 32).

Ilustrasi komponen Nomor-nomor dari bagian-bagian perkakas yang digambarkan mengacu pada gambar pada halaman grafik di awal petunjuk. (1) Pelat pemasangan (2) Pengunci (3) Gagang (4) Baut pengunci (5) Kaki dengan tinggi yang dapat disesuaikan (6) Rangka atas dengan pengunci (7) Rangka bawah (8) Roda (9) Penyangga sambungan (10) Pijakan kaki (11) Set pengencangan (12) Mur kupu-kupu

Data teknis Meja kerja GTA 60 W Nomor seri 0 601 B12 0.. Tinggi meja kerja mm 622 Kapasitas beban maks. (perkakas listrik + benda kerja)

kg 180

Berat sesuai dengan EPTA- Procedure 01:2014

kg 24

Pemasangan Lingkup pengiriman

Perhatikan ilustrasi lingkup pengiriman pada awal panduan pengoperasian.

Sebelum memasang meja kerja, periksa apakah semua komponen yang tercantum di bawah ini telah disertakan: No. Nama Jumlah (1) Pelat pemasangan 1 (6) Rangka atas dengan pengunci (2) 1 (7) Rangka bawah 1 (8) Roda dengan penyangga sambungan (9) 2 (10) Pijakan kaki 1 (11) Set pengencangan terdiri dari:

Baut heksagonal M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

32 | Bahasa Indonesia

No. Nama Jumlah Sekrup kembang

M8 x 5  

6 Washer

M10 M10 (cincin penjepit) M6

  18

2 8

Mur pengunci M10 M8 M6

  6 6 4

Perkakas yang diperlukan selain peralatan yang disertakan dalam pengiriman: Obeng kembang Kunci pas (10 mm, 8 mm, 6 mm)

Memasang rangka bawah yang dapat dipindahkan Keluarkan dengan hati-hati semua komponen yang

disertakan dari dalam kemasan. Singkirkan semua bahan kemasan. Untuk pemasangan, ikuti gambar A  E.

Untuk gambar A: Kencangkan rangka atas (6) dengan rangka bawah (7).

Untuk gambar B: Kencangkan tiap roda kiri dan kanan (8) ke rangka atas

(6). Pastikan penyangga sambungan (9) mengarah ke luar dan ban roda menghadap ke rangka bawah (7). Catatan: Jangan mengencangkan mur. Bagian yang disekrup harus dapat bergerak bebas.

Untuk gambar C: Pasang penyangga kaki (10) ke kedua roda (8).

Untuk gambar D: Kencangkan pelat pemasangan (1) pada kedua sisi ke

rangka atas (6). Catatan: Jangan mengencangkan mur. Bagian yang disekrup harus dapat bergerak bebas.

Untuk gambar E: Kencangkan tiap penyangga sambungan kiri dan kanan

(9) ke pelat pemasangan (1). Catatan: Jangan mengencangkan mur. Bagian yang disekrup harus dapat bergerak bebas.

Mempersiapkan meja kerja Menyetel meja kerja (lihat gambar F) Sebelum memasang perkakas listrik, rangka bawah harus dipisah. Untuk melepaskan baut pengunci (4), tarik sedikit meja

kerja ke atas pada gagang (3).

Buka pengunci (2). Dengan begitu, baut pengunci yang mengunci roda akan tertarik kembali.

Posisikan satu kaki di pijakan kaki (10) dan tekan gagang (3) ke bawah dengan kedua tangan selama beberapa saat hingga baut pengunci mengunci kembali.

Tutup pengunci (2). Keki dengan tinggi yang dapat disesuaikan (5) membantu mensejajarkan meja kerja. Kendurkan mur kupu-kupu (12) dan kencangkan atau

kendurkan kaki hingga meja kerja rata.

Mengencangkan perkakas listrik pada pelat pemasangan (lihat gambar G) Pelat pemasangan (1) dapat digunakan secara universal. Berkat berbagai lubang pemasangan, perkakas listrik Bosch serta produk pesaing dapat dipasang pada meja kerja.

JJ

J

I

Produsen Model Lubang pemasangan Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H

Posisikan perkakas listrik pada lubang pemasangan yang sesuai.

Kencangkan pelat pemasangan dan perkakas listrik dengan sekrup, cincin dan mur yang sesuai.

Pengoperasian Petunjuk pengoperasian Sebelum pengerjaan, pastikan pengunci (2) selalu tertutup. Selalu pegang benda kerja dengan kuat, terutama pada bagian yang lebih panjang dan lebih berat. Setelah

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Ting Vit | 33

memotong benda kerja, titik berat dapat bergeser sedemikian rupa sehingga meja kerja terbalik. Jangan membebani meja kerja. Selalu perhatikan kapasitas beban maksimal meja kerja.

Mengangkut (lihat gambar H) Rangka bawah harus dilipat untuk pengangkutan. Untuk melepaskan baut pengunci (4), tekan sedikit meja

kerja ke bawah pada gagang (3). Buka pengunci (2).

Dengan begitu, baut pengunci yang mengunci roda akan tertarik kembali.

Posisikan satu kaki di pijakan kaki (10) dan tarik gagang (3) ke atas dengan kedua tangan selama beberapa saat hingga baut pengunci mengunci kembali.

Tutup pengunci (2).

Perawatan dan servis Layanan pelanggan dan konsultasi penggunaan Layanan pelanggan Bosch menjawab semua pertanyaan Anda tentang reparasi dan perawatan serta tentang suku cadang produk ini. Gambaran teknis (exploded view) dan informasi mengenai suku cadang dapat ditemukan di: www.bosch-pt.com Tim konsultasi penggunaan Bosch akan membantu Anda menjawab pertanyaan seputar produk kami beserta aksesorinya. Jika Anda hendak menanyakan sesuatu atau memesan suku cadang, selalu sebutkan nomor model yang terdiri dari 10 angka dan tercantum pada label tipe produk.

Indonesia PT Robert Bosch Palma Tower 10th Floor Jalan RA Kartini II-S Kaveling 6 Pondok Pinang, Kebayoran Lama Jakarta Selatan 12310 Tel.: (021) 3005 5800 Fax: (021) 3005 5801 E-Mail: boschpowertools@id.bosch.com www.bosch-pt.co.id

Alamat layanan lainnya dapat ditemukan di: www.bosch-pt.com/serviceaddresses

Cara membuang Meja kerja, aksesori, dan kemasan harus didaur ulang secara ramah lingkungan.

Ting Vit

Cc cnh bo an ton Hng dn an ton chung

Hy c mi cnh bo v hng dn nh km bn lm vic hoc dng c in cn lp. Khng tun th mi cnh bo v hng dn c lit k di y c th b in git, gy chy v/hay b thng tt nghim trng.

Cc cnh bo an ton cho bn lm vic u Rt phch cm ra khi cm v/hoc tho

pin ra khi dng c in, trc khi tin hnh bt k iu chnh no trn thit b hoc thay ph kin. V tnh lm dng c in hot ng l nguyn nhn gy ra nhiu tai nn.

u Lp rp gi ca ng cch trc khi gn dng c in. S lp rp hon ho l quan trng ngn nga nguy c b sp.

u Hy gn chc chn dng c in trn bn lm vic, trc khi s dng. Dng c in b trt trn bn lam vic c th gy ra s mt iu khin.

u t bn lm vic ln mt b mt chc chn, phng v nm ngang. Nu bn lm vic c th b trt hay lung lay th phi gia cng khng th chnh chy mt cch ng u v an ton c.

u Khng lm qu ti bn lm vic v khng s dng lm thang hoc gin gio. Lm qu ti hay ng ln bn lm vic c th lm lch trng tm ca bn lm vic v lm cho lt nghing.

u m bo rng ton b vt v chi tit kt ni c sit cht khi vn chuyn v khi lm vic. Cc kt ni lng c th dn n mt n nh v qu trnh ca khng chnh xc.

u Ch lp v tho dng c in, nu n v tr vn chuyn (Hng dn v v tr vn chuyn xem thm hng dn vn hnh ca dng c in tng ng). Nu khng dng c in c th c trng tm khng thun li khin bn khng th gi n mt cch chc chn.

u Ch c vn hnh dng c in gn ln mt lp rp trn bn lm vic. Nu khng c bn lm vic, mt lp rp c dng c in s khng c gi chc chn v c th b lt.

u m bo rng cc phi gia cng di v nng khng lm mt thng bng bn lm vic. Cc chi tit gia cng di v/hay nng phi c k phn u trng.

u Khi y bn lm vic vo nhau hoc khi tch n ra, khng a cc ngn tay ca bn n gn cc im khp ni. Cc ngn tay ca bn c th b nghin nt.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

34 | Ting Vit

Cc Biu Tng Cc biu tng sau y hm cha ngha cho vic s dng bn lm vic ca bn. Xin vui lng ghi nhn cc biu tng v ngha ca chng. S hiu ng cc biu tng s gip bn bit cch s dng bn lm vic tt v an ton hn. Biu tng v cc ngha ca chng

180 kg

Ch s trng ti ti a (Dng c in + Phi gia cng) ca bn lm vic l 180 kg.

M T Sn Phm v c Tnh K Thut S dng ng cch Bn lm vic c thit k cha cc my ca c nh ca Bosch sau y (Trng thi 2020.10): GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. ) Cng vi dng c in, bn lm vic c thit k ct phn on cc tm vn v tit din. Bn lm vic cng ph hp vi nhiu sn phm ca i th cnh tranh (xem Gn dng c in trn mt lp rp (xem hnh G), Trang 35).

Cc b phn c minh ha S nh s cc c tnh sn phm l tham kho hnh minh ha trn trang hnh nh phn u ca hng dn. (1) Mt lp rp (2) Kha (3) Tay Nm (4) Cht kha (5) Chn c th iu chnh chiu cao (6) Khung trn c kha (7) Khung di (8) Bnh (9) Thang ngang (10) Gi chn (11) B vt nh v (12) ai c tai hng

Thng s k thut Bn lm vic GTA 60 W M s my 0 601 B12 0..

Bn lm vic GTA 60 W Bn lm vic cao mm 622 Ch s trng ti ti a (Dng c in + Phi gia cng)

kg 180

Trng lng theo Qui trnh EPTA-Procedure 01:2014

kg 24

S lp vo Cc mn c giao

Vui lng tham kho hnh minh ha phm vi giao hng u hng dn vn hnh.

Trc khi lp bn lm vic, hy kim tra xem tt c cc b phn theo thit k c c cung cp y khng: S. K hiu S

lng (1) Mt lp rp 1 (6) Khung trn c kha (2) 1 (7) Khung di 1 (8) Bnh xe c thang ngang (9) 2 (10) Gi chn 1 (11) B vt nh v gm c:

Cc vt u lc gic M10 x 100 M10 x 50 M6 x 110 M6 x 75 M6 x 45

  6 2 4 4 4

Vt u rnh ch thp M8 x 5

  6

Vng m M10 M10 (Vng m kha) M6

  18

2 8

ai c kha M10 M8 M6

  6 6 4

Cc dng c ph tr cn thit (khng nm trong phm vi giao km): Cha vn vt bn cnh Cha vn (10 mm, 8 mm, 6 mm)

Lp khung di c th di chuyn Ly tt c cc b phn c giao km theo my

ra khi bao b mt cch cn thn.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

Ting Vit | 35

Ly tt c cc gi ti liu. Hy lm theo hnh nh lp rp A  E.

v hnh nh A: Vn vt cc khung trn (6) vi khung di (7).

v hnh nh B: Vn vt bnh xe bn tri v bn phi (8) vi

khung trn tng ng (6). Hy m bo rng cc thanh ngang (9) hng ra ngoi v lp ca bnh xe hng v khung di (7). Hng dn: Khng sit qu cht ai c. Cc b phn vn vt phi chuyn ng trn tru.

v hnh nh C: Vn vt gi chn (10) vi c hai bnh xe (8).

v hnh nh D: Vn vt mt lp rp (1) vi khung trn c hai

bn (6). Hng dn: Khng sit qu cht ai c. Cc b phn vn vt phi chuyn ng trn tru.

v hnh nh E: Vn vt thanh ngang bn tri v bn phi (9) vi

mt lp rp (1). Hng dn: Khng sit qu cht ai c. Cc b phn vn vt phi chuyn ng trn tru.

Chun b bn lm vic Lp bn lm vic (xem hnh F) Trc khi gn dng c in, bn phi y khung di tch ra. Kp nh bn lm vic ln trn bng tay nm

gim ti cho cht kha (4) (3). M kha (2). Do , cc cht kha gi cht bnh

xe s c ko li tr li. t chn ln gi chn (10) v n tay nm (3)

xung di bng c hai tay cho n khi cht kha khp li.

ng kha (2). Cc chn c th iu chnh chiu cao (5) gip bn cn chnh bn lm vic. Ni lng ai c tai hng (12) v vn vo hoc

vn ra cc chn cho n khi bn lm vic c chnh phng.

Gn dng c in trn mt lp rp (xem hnh G) Mt lp rp (1) c th s dng ph bin. Nh c nhiu l khoan lp rp khc nhau, m bn lm vic c th gn c dng c in Bosch v cc sn phm ca i th cnh tranh.

JJ

J

I

Nh sn xut

Model L khoan lp

Bosch GTS 10

GTS 10 XC

GTS 10 J

GTS 635-216

GTS 18V-216

B

B

J

T

T DeWALT DW744XP D Metabo TS 250 Me Makita 2703 M Hitachi C 10 R A 2 H nh v dng c in trn cc l khoan lp rp

ph hp. Vn vt mt lp rp v dng c in bng vt ph

hp, vng m v ai c.

Vn Hnh Hng Dn S Dng Hy m bo rng kha (2) lun c ng trc khi lm vic. Lun gi phi chc chn, c bit l on di hn, nng hn. Sau khi ct phi gia cng, trng tm c th b dch chuyn khin bn lm vic b lt. Khng lm qu ti bn lm vic. Lun tun th ch s trng ti ti a ca bn lm vic.

Vn chuyn (xem hnh H) Bn phi y khung di li vn chuyn. n nh bn lm vic xung di bng tay nm

gim ti cho cht kha (4) (3). M kha (2).

Do , cc cht kha gi cht bnh xe s c ko li tr li.

t chn ln gi chn (10) v ko tay nm (3) ln trn bng c hai tay cho n khi cht kha khp li.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

36 | Ting Vit

ng kha (2).

Bo Dng v Bo Qun Dch v h tr khch hng v t vn s dng B phn phc v hng sau khi bn ca chng ti tr li cc cu hi lin quan n vic bo dng v sa cha cc sn phm cng nh ph tng thay th ca bn. S m t v thng tin v ph tng thay th cng c th tra cu theo di y: www.bosch-pt.com i ng t vn s dng ca Bosch s gip bn gii p cc thc mc v sn phm v ph kin. Trong tt c cc phn hi v n t ph tng, xin vui lng lun lun nhp s hng ha 10 ch s theo nhn ca hng ha.

Vit Nam CN CNG TY TNHH BOSCH VIT NAM TAI TP.HCM Tng 14, Ngi Nh c, 33 L Dun Ph ng Bn Ngh, Qun 1, Thanh Ph H Chi Minh Tel.: (028) 6258 3690 Fax: (028) 6258 3692 - 6258 3694 Hotline: (028) 6250 8555 Email: tuvankhachhang-pt@vn.bosch.com www.bosch-pt.com.vn www.baohanhbosch-pt.com.vn

Xem thm a ch dch v ti: www.bosch-pt.com/serviceaddresses

S thi b Bn lm vic, ph kin, bao b phi c phn loi ti ch theo hng thn thin vi mi trng.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 37

.

. /

t /

.

.

t .

. t

.

. t

.

. t

.

.

t .

.

t )

.(

.

t .

. t

.

.

t .

.

. .

.

180 kg

+ )

(180 .

) 2020.10:(

GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. )

.

) )

G  ,(38(.

. )1( )2( )3( )4( )5( )6( )7( )8( )9( )10( )11( )12(

GTA 60 W

0 601 B12 0..

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

38 |

GTA 60 W 622

)

( +

180

EPTA- Procedure 01:2014

24

.

:

)1( 1 )6( )2(1 )7( 1 )8( )9(2 )10 (

1

)11 (

:

M10 x 100 M10 x 50 M6 x 110

M6 x 75 M6 x 45

  6 2 4 4 4

M8 x 5

  6

M10 M10( )

M6

  18 2 8

M10

M8 M6

  6 6 4

:

) 10  8  6( 

. . A  E.

A: )6( )7(.

B: )8(

)6(. )9(

)7(. : .

. C:

)10( )8(. D:

)1( )6(. : .

. E:

)9( )1(.

: . .

) F(

.

)4( )3(.

)2( . .

)10( )3(

. )2(.

)5( .

)12( .

)G(

)1( .

.

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 39

JJ

J

I

BoschGTS 10 GTS 10 XC

GTS 10 J GTS 635-216 GTS 18V-216

B B J T T

DeWALTDW744XPD MetaboTS 250Me Makita2703M HitachiC 10 R A 2H

.

.

)2(.

.

. .

.

) H( .

)4( )3(.

)2(.

. )10(

)3( .

)2(.

.

:www.bosch-pt.com

Bosch

.

.

Robert Bosch Morocco SARL

53 20300

:+212 5 29 31 43 27 : sav.outillage@ma.bosch.com

: www.bosch-pt.com/serviceaddresses

.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

40 |

.

.

t

/ .

.

t .

.

t .

.

t .

.

t .

. t

.

. t

) .(

. t

.

. t

.

. t

. .

. .

.

180 kg

+ ) (

180.

Bosch

) 2020.10:( GTS 10 ( 3 601 L30 2.. ) GTS 10 J ( 3 601 M30 5.. ) GTS 10 XC ( 3 601 L30 4.. ) GTS 635-216 ( 3 601 M42 0.. ) GTS 18V-216 ( 3 601 M44 0.. )

.

)

) G  ,(41( .

.

)1( )2( )3( )4( )5( )6( )7( )8( )9( )10( )11( )12(

1 609 92A 5YE | (23.10.2020) Bosch Power Tools

| 41

GTA 60 W

0 601 B12 0.. mm622

) ( +

kg180

EPTA-

Procedure 01:2014

kg24

.

:

)1( 1 )6( )2(1 )7( 1 )8( )9(2 )10 (

1

)11 (

:

M10 x 100 M10 x 50 M6 x 110

M6 x 75 M6 x 45

  6 2 4 4 4

M8 x 5

  6

M10 M10( )

M6

  18 2 8

M10

M8 M6

  6 6 4

: ) 10 mm 8 mm 6 mm(

.

. A  E.

A: )6( )7(.

B: )8(

)6(. )9(

)7(.

: . .

C: )10( )8(.

D: )1(

)6(. : .

. E:

)9( )1(.

: . .

)

F(

. )4(

)3(. )2( .

. )10( )3(

.

)2(. )5(

. )12(

. )

G( )1(.

.

Bosch Power Tools 1 609 92A 5YE | (23.10.2020)

42 |

JJ

J

I

GTS 10 GTS 10 XC

GTS 10 J GTS 635-216 GTS 18V-216

B B J T T

DeWALTDW744XPD MetaboTS 250Me Makita2703M HitachiC 10 R A 2H

.

.

)2( .

.

.

.

.

) H(

. )4(

)3(. )2(.

.

)10( )3(

. )2(.

.

:

www.bosch-pt.com Bosch

.

10

.

-

3 . 1994834571 :42039000+ 9821

: www.bosch-pt.com/serviceaddresses

Manualsnet FAQs

If you want to find out how the GTA 60 W Bosch works, you can view and download the Bosch GTA 60 W Stand Instruction Manual V2 on the Manualsnet website.

Yes, we have the Instruction Manual for Bosch GTA 60 W as well as other Bosch manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Bosch GTA 60 W. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bosch GTA 60 W Stand Instruction Manual V2 is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bosch GTA 60 W Stand Instruction Manual V2 consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bosch GTA 60 W Stand Instruction Manual V2 free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bosch GTA 60 W Stand Instruction Manual V2, simply download the document to your computer. Once downloaded, open the PDF file and print the Bosch GTA 60 W Stand Instruction Manual V2 as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.