Bosch 0 611 265 160 Hammer Instruction Manual PDF

1 of 41
1 of 41

Summary of Content for Bosch 0 611 265 160 Hammer Instruction Manual PDF

Robert Bosch Power Tools GmbH 70538 Stuttgart GERMANY

www.bosch-pt.com

1 609 92A 1TX (2013.11) PS / 42 ASIA

GBH Professional 8-45 D | 8-45 DV

en Original instructions cn

tw

ko

th

id Petunjuk-Petunjuk untuk Penggunaan Orisinal vi Bn gc hng dn s dng

OBJ_BUCH-1388-005.book Page 1 Monday, November 16, 2015 3:01 PM

2 |

1 609 92A 1TX | (16.11.15) Bosch Power Tools

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

. . . . . . . . . . . . . . . . . . . . 8

. . . . . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Bahasa Indonesia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 26 Ting Vit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 31

OBJ_BUCH-1388-005.book Page 2 Monday, November 16, 2015 2:58 PM

English | 3

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

English General Power Tool Safety Warnings

Read all safety warnings and all in- structions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or seri- ous injury. Save all warnings and instructions for future reference. The term power tool in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety Keep work area clean and well lit. Cluttered or dark areas

invite accidents. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an exten- sion cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoid- able, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while op- erating power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal inju- ries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or en- ergising power tools that have the switch on invites acci- dents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a ro- tating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewel- lery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

If devices are provided for the connection of dust ex- traction and collection facilities, ensure these are con- nected and properly used. Use of dust collection can re- duce dust-related hazards.

Power tool use and care Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or bind- ing of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in ac- cordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en- sure that the safety of the power tool is maintained.

WARNING

OBJ_BUCH-1388-005.book Page 3 Wednesday, July 13, 2016 3:41 PM

4 | English

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Hammer Safety Warnings Wear ear protectors. Exposure to noise can cause hear-

ing loss. Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury. Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting ac- cessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock.

Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an author- ised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains sock- et elsewhere. Products sold in AUS and NZ only: Use a residual current de- vice (RCD) with a rated residual current of 30 mA or less.

Additional Safety and Working In- structions Observe the mains voltage! The voltage of the power

source must correspond with the data on the type plate of the machine.

Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility com- pany for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property dam- age.

Firmly tighten the auxiliary handle, hold the machine firmly with both hands while working and keep proper footing and balance at all times. The machine is securely guided with both hands.

Select the correct operating mode and the suitable ap- plication tool for the material to be worked.

Insert the SDS-max application tool: Check the latching by pulling the tool.

Replace a damaged dust protection cap immediately. The dust protection cap largely prevents the penetration of drilling dust into the tool holder during operation. When in- serting the tool, pay attention that the dust protection cap is not damaged.

Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to ones health and cause allergic reactions, lead to res- piratory infections and/or cancer. Materials containing asbestos may only be worked by specialists. As far as possible, use a dust extraction system suita-

ble for the material.

Provide for good ventilation of the working place. It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the materials to be worked.

If the application tool should become blocked, switch the machine off. Loosen the application tool.

Before switching on the power tool, make sure that the application tool moves freely. When switching on with a blocked drilling tool, high torque reaction can occur.

To save energy, only switch the power tool on when using it.

Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.

Restarting Protection In chiselling mode, the restarting protection prevents un- controlled starting of the machine after a power failure. To restart the operation, switch the On/Off switch to

the Off position and start the machine again.

Symbols The following symbols are important for reading and under- standing the operating instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the machine in a better and safer manner.

Vibration Damper (GBH 8-45 DV)

The integrated vibration damper reduces occurring vibra- tions.

Symbol Meaning GBH 8-45 D/ GBH 8-45 DV: Rotary Hammer Grey-marked area: Handle (insulated gripping surface)

Article number

Read all safety warnings and all instruc- tions

Before any work on the machine itself, pull the mains plug from the socket out- let

Wear protective gloves

OBJ_BUCH-1388-005.book Page 4 Wednesday, July 13, 2016 3:41 PM

English | 5

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Delivery Scope Rotary hammer, auxiliary handle. Application tools and other accessories shown or described are not part of the standard delivery scope. A complete overview of accessories can be found in our ac- cessories program.

Intended Use The machine is intended for hammer drilling in concrete, brick and stone as well as for chiselling.

Technical Data The technical data of the machine are listed in the table on page 37. The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Always wear ear protection

Wear safety glasses/goggles

Movement direction

Reaction direction

Next step of action

Prohibited action

Hammer Drilling

Chiselling

Vario-Lock

Switching On

Switching Off

On/Off switch lock-on

Releasing the On/Off switch

Low speed/impact rate

High speed/impact rate

Tool holder

Apply a light coat of grease to the shank end of the application tool

Service Indicator

P1 Rated power input E Impact energy per stroke according to

EPTA-Procedure 05/2009 n0 No-load speed

Symbol Meaning Restarting Protection

Drilling diameter, max. Concrete

Brickwork

Twist drill bit

Break-through drill bit

Core bit

Weight according to EPTA-Procedure 01:2014 Protection class

LwA Sound power level LpA Sound pressure level ah Vibration total value K Uncertainty

Symbol Meaning

OBJ_BUCH-1388-005.book Page 5 Wednesday, July 13, 2016 3:41 PM

6 | English

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Mounting and Operation The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the safety instructions.

Action Figure Please observe Page Insert the SDS-max application tool

1 38

Removing the SDS-max application tool

2 38

Selecting the Operating Mode 3 39

Changing the chisel position (Vario-Lock)

4 39

Changing the position of the auxiliary handle

5 39

Switching On/Off in Drilling Mode 6 40

Switching On/Off in Chiselling Mode

7 40

Adjusting the Speed 8 40

Observing the service indicator 9 41

OBJ_BUCH-1388-005.book Page 6 Wednesday, July 13, 2016 3:41 PM

English | 7

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Maintenance and Cleaning For safe and proper working, always keep the machine

and ventilation slots clean. If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in or- der to avoid a safety hazard.

Service Indicator (see Fig. 9, page 41) When the carbon brushes are worn out, the machine switches itself off. This is indicated approx. 8 hours beforehand by the lighting or blinking of the service indicator . The machine must then be sent to an after-sales service agent. Addresses are listed in the Section After-sales Service and Application Ser- vice. Service indicator flashes in regular intervals, the machine is defective. In this case, do not continue to use the machine and send it immediately to an after-sales service agent.

After-sales Service and Application Service In all correspondence and spare parts order, please always in- clude the 10-digit article number given on the type plate of the machine. Our after-sales service responds to your questions concern- ing maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can al- so be found under: www.bosch-pt.com Boschs application service team will gladly answer questions concerning our products and their accessories.

Peoples Republic of China China Mainland Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road Bin Jiang District 310052 Hangzhou, P.R.China Service Hotline: 4008268484 Fax: (0571) 87774502 E-Mail: contact.ptcn@cn.bosch.com www.bosch-pt.com.cn HK and Macau Special Administrative Regions Robert Bosch Hong Kong Co. Ltd. 21st Floor, 625 Kings Road North Point, Hong Kong Customer Service Hotline: +852 2101 0235 Fax: +852 2590 9762 E-Mail: info@hk.bosch.com www.bosch-pt.com.hk

Indonesia PT. Multi Mayaka Kawasan Industri Pulogadung Jalan Rawa Gelam III No. 2 Jakarta 13930 Indonesia Tel.: (021) 46832522 Fax: (021) 46828645/6823 E-Mail: sales@multimayaka.co.id www.bosch-pt.co.id

Philippines Robert Bosch, Inc. 28th Floor Fort Legend Towers, 3rd Avenue corner 31st Street, Fort Bonifacio Global City, 1634 Taguig City, Philippines Tel.: (02) 8703871 Fax: (02) 8703870 matheus.contiero@ph.bosch.com www.bosch-pt.com.ph Bosch Service Center: 9725-27 Kamagong Street San Antonio Village Makati City, Philippines Tel.: (02) 8999091 Fax: (02) 8976432 rosalie.dagdagan@ph.bosch.com

Malaysia Robert Bosch (S.E.A.) Sdn. Bhd. No. 8A, Jalan 13/6 G.P.O. Box 10818 46200 Petaling Jaya Selangor, Malaysia Tel.: (03) 79663194 Fax: (03) 79583838 cheehoe.on@my.bosch.com Toll-Free: 1800 880188 www.bosch-pt.com.my

Thailand Robert Bosch Ltd. Liberty Square Building No. 287, 11 Floor Silom Road, Bangrak Bangkok 10500 Tel.: 02 6393111, 02 6393118 Fax: 02 2384783 Robert Bosch Ltd., P. O. Box 2054 Bangkok 10501, Thailand www.bosch.co.th

OBJ_BUCH-1388-005.book Page 7 Wednesday, July 13, 2016 3:41 PM

8 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Bosch Service Training Centre La Salle Tower Ground Floor Unit No.2 10/11 La Salle Moo 16 Srinakharin Road Bangkaew, Bang Plee Samutprakarn 10540 Thailand Tel.: 02 7587555 Fax: 02 7587525

Singapore Robert Bosch (SEA) Pte. Ltd. 11 Bishan Street 21 Singapore 573943 Tel.: 6571 2772 Fax: 6350 5315 leongheng.leow@sg.bosch.com Toll-Free: 1800 3338333 www.bosch-pt.com.sg

Vietnam Robert Bosch Vietnam Co. Ltd 10/F, 194 Golden Building 473 Dien Bien Phu Street Ward 25, Binh Thanh District 84 Ho Chi Minh City Vietnam Tel.: (08) 6258 3690 ext. 413 Fax: (08) 6258 3692 hieu.lagia@vn.bosch.com www.bosch-pt.com

Australia, New Zealand and Pacific Islands Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169 Customer Contact Center Inside Australia: Phone: (01300) 307044 Fax: (01300) 307045 Inside New Zealand: Phone: (0800) 543353 Fax: (0800) 428570 Outside AU and NZ: Phone: +61 3 95415555 www.bosch.com.au

Disposal The machine, accessories and packaging should be sorted for environmental-friendly recycling. Do not dispose of power tools into household waste!

Subject to change without notice.

!

" "

RCD RCD

/

OBJ_BUCH-1388-005.book Page 8 Wednesday, July 13, 2016 3:41 PM

| 9

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

/

SDS-max- :

/

P2

(GBH 8-45 DV)

OBJ_BUCH-1388-005.book Page 9 Wednesday, July 13, 2016 3:41 PM

10 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

GBH 8-45 D/

GBH 8-45 DV:

Vario-Lock

/

/

P1

E EPTA-Procedure

05/2009

n0

EPTA-Procedure 01:2014

LwA

LpA

ah

K

OBJ_BUCH-1388-005.book Page 10 Wednesday, July 13, 2016 3:41 PM

| 11

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

37

230 V

SDS-max- 1 38

SDS-max- 2 38

3 39

(Vario-Lock) 4 39

5 39

/

6 40

/

7 40

8 40

9 41

OBJ_BUCH-1388-005.book Page 11 Wednesday, July 13, 2016 3:41 PM

12 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

( 9, 41)

8

" "

10

:

www.bosch-pt.com

567

310052

4008268484

(0571) 87774502

contact.ptcn@cn.bosch.com

www.bosch-pt.com.cn

625 21

+852 2101 0235

+852 2590 9762

info@hk.bosch.com

www.bosch-pt.com.hk

Robert Bosch Power Tools GmbH

70538 Stuttgart / GERMANY

70538 /

!

" "

,

RCD RCD

OBJ_BUCH-1388-005.book Page 12 Wednesday, July 13, 2016 3:41 PM

| 13

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

/

SDS-max- :

/

P2

OBJ_BUCH-1388-005.book Page 13 Wednesday, July 13, 2016 3:41 PM

14 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

(GBH 8-45 DV)

GBH 8-45 D/

GBH 8-45 DV:

:

Vario-Lock

/

/

P1

E

EPTA-Procedure 05/2009

n0

EPTA-Procedure 01:2014

LwA

LpA

ah

K

OBJ_BUCH-1388-005.book Page 14 Wednesday, July 13, 2016 3:41 PM

| 15

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

37

230

SDS-max- 1 38

SDS-max- 2 38

3 39

(Vario-Lock) 4 39

5 39

/

6 40

/

7 40

OBJ_BUCH-1388-005.book Page 15 Wednesday, July 13, 2016 3:41 PM

16 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

( 9, 41)

8

" "

10

:

www.bosch-pt.com

90 6

10491

: (02) 2515 5388

: (02) 2516 1176

www.bosch-pt.com.tw

:

Robert Bosch Power Tools GmbH

70538 Stuttgart / GERMANY

70538 /

.

.

.

( )

( ) .

.

.

, .

.

.

.

. .

.

.

8 40

9 41

OBJ_BUCH-1388-005.book Page 16 Wednesday, July 13, 2016 3:41 PM

| 17

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

, , , .

.

.

.

, .

,

.

.

.

.

.

.

. ,

.

.

.

.

.

, ,

.

. ,

,

.

.

.

.

.

.

.

. .

.

,

.

,

, .

.

. .

.

.

,

.

,

.

.

,

.

.

. ,

,

. .

.

.

.

, , ,

. .

.

,

.

.

.

.

.

.

.

.

OBJ_BUCH-1388-005.book Page 17 Wednesday, July 13, 2016 3:41 PM

18 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

!

.

.

.

.

,

.

.

.

SDS-max :

.

.

.

.

,

/

.

.

. . P2

.

.

. .

.

.

.

.

.

.

.

.

.

.

(GBH 8-45 DV)

.

GBH 8-45 D/

GBH 8-45 DV:

: (

)

OBJ_BUCH-1388-005.book Page 18 Wednesday, July 13, 2016 3:41 PM

| 19

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

, .

.

.

.

37

.

[U] 230 V .

.

.

. . .

Vario-Lock

/

/

P1

E EPTA-Procedure 05/2009

n0

EPTA 01:2014

LwA

LpA

ah

K

SDS-max 1 38

OBJ_BUCH-1388-005.book Page 19 Wednesday, July 13, 2016 3:41 PM

20 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

.

.

( 9, 41 )

. 8

.

. "AS "

.

.

.

AS

10

.

.

AS

.

: 080-955-0909 :

Bosch-pt.hotline@kr.bosch.com

SDS-max 2 38

3 39

(Vario-Lock)

4 39

5 39

6 40

7 40

8 40

9 41

OBJ_BUCH-1388-005.book Page 20 Wednesday, July 13, 2016 3:41 PM

| 21

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

( )

298

www.bosch-pt.co.kr

.

!

.

/

""

()

()

/

OBJ_BUCH-1388-005.book Page 21 Wednesday, July 13, 2016 3:41 PM

22 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

/

!

SDS-max:

OBJ_BUCH-1388-005.book Page 22 Wednesday, July 13, 2016 3:41 PM

| 23

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

/

- P2

-

(GBH 8-45 DV)

GBH 8-45 D/

GBH 8-45 DV:

:

()

/

Vario-Lock

-

-

OBJ_BUCH-1388-005.book Page 23 Wednesday, July 13, 2016 3:41 PM

24 |

1 609 92A 1TX | (13.7.16) Bosch Power Tools

37

[U] 230

/

/

P1

E -

EPTA-Procedure 05/2009 n0

-EPTA-

Procedure 01:2014

LwA

LpA

ah

K

SDS-max 1 38

OBJ_BUCH-1388-005.book Page 24 Wednesday, July 13, 2016 3:41 PM

| 25

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

( 9 41)

8

""

SDS-max 2 38

3 39

(Vario-Lock)

4 39

5 39

-

6 40

-

7 40

8 40

9 41

OBJ_BUCH-1388-005.book Page 25 Wednesday, July 13, 2016 3:41 PM

26 | Bahasa Indonesia

1 609 92A 1TX | (13.7.16) Bosch Power Tools

: www.bosch-pt.com

11 287

10500

02 6393111, 02 6393118

02 2384783 . 2054

10501

www.bosch.co.th

G 2 10/11 16

10540

02 7587555 02 7587525

!

Bahasa Indonesia Petunjuk-Petunjuk Umum untuk Perkakas Listrik

Bacalah semua petunjuk- petunjuk untuk keselamatan

kerja dan petunjuk-petunjuk untuk penggunaan. Kesalahan dalam menjalankan petunjuk-petunjuk untuk keselamatan kerja dan petunjuk-petunjuk untuk penggunaan dapat mengakibatkan kontak listrik, kebakaran dan/atau luka- luka yang berat. Simpanlah semua petunjuk-petunjuk untuk keselamatan kerja dan petunjuk-petunjuk lainnya untuk penggunaan di masa depan. Kata perkakas listrik yang disebutkan di dalam petunjuk- petunjuk untuk keselamatan kerja adalah sebutan untuk perkakas listrik pakai listrik jaringan (dengan kabel) dan untuk perkakas listrik tenaga baterai (tanpa kabel listrik).

Keselamatan kerja di tempat kerja Jagalah supaya tempat kerja selalu bersih dan terang.

Tempat kerja yang tidak rapi atau tidak terang dapat mengakibatkan terjadinya kecelakaan.

Janganlah menggunakan perkakas listrik di tempat di mana dapat terjadi ledakan, di mana ada cairan, gas atau debu yang mudah terbakar. Perkakas listrik dapat memancarkan bunga api yang lalu mengakibatkan debu atau uap terbakar.

Selama menggunakan perkakas listrik, jauhkan anak- anak dan orang-orang lain dari tempat kerja. Jika konsentrasi terganggu, bisa jadi Anda tidak bisa mengen- dalikan perkakas listrik tersebut.

Keamanan listrik Steker dari perkakas listrik harus cocok pada

stopkontak. Janganlah sekali-kali merubah steker. Janganlah menggunakan steker perantara bersama dengan perkakas listrik yang mempunyai hubungan arde. Steker yang tidak dirubah dan stopkontak yang cocok mengurangi bahaya terjadinya kontak listrik.

Jagalah supaya badan Anda tidak bersentuhan dengan permukaan yang mempunyai hubungan arde, misalnya pipa-pipa, radiator pemanas ruangan, kompor listrik dan lemari es. Ada risiko besar terjadi kontak listrik, jika badan Anda mempunyai hubungan arde.

Jagalah supaya perkakas listrik tidak kena hujan atau menjadi basah. Air yang masuk ke dalam perkakas listrik menambah risiko terjadinya kontak listrik.

Janganlah menyalah gunakan kabel listrik untuk mengangkat dan menggantungkan perkakas listrik atau untuk menarik steker dari stopkontak. Jagalah supaya kabel listrik tidak kena panas, minyak, pinggiran yang tajam atau bagian-bagian perkakas yang bergerak. Kabel listrik yang rusak atau tersangkut menambah risiko terjadinya kontak listrik.

PERHATIKANLAH

OBJ_BUCH-1388-005.book Page 26 Wednesday, July 13, 2016 3:41 PM

Bahasa Indonesia | 27

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Jika Anda menggunakan perkakas listrik di luar gedung, gunakanlah hanya kabel sambungan yang juga cocok untuk pemakaian di luar gedung. Penggunaan kabel sambungan yang cocok untuk pemakaian di luar gedung mengurangi risiko terjadinya kontak listrik.

Jika penggunaan perkakas listrik di tempat yang basah tidak bisa dihindarkan, gunakanlah sakelar pengaman terhadap arus penyimpangan. Penggunaan sakelar pengaman terhadap arus penyimpangan mengurangi risiko terjadinya kontak listrik.

Keselamatan kerja Berhati-hatilah selalu, perhatikanlah apa yang Anda

kerjakan dan bekerjalah dengan seksama jika menggunakan perkakas listrik. Janganlah mengguna- kan perkakas listrik, jika Anda capai atau berada di bawah pengaruh narkoba, minuman keras atau obat. Jika Anda sekejap mata saja tidak berhati-hati sewaktu menggunakan perkakas listrik, dapat terjadi luka-luka berat.

Pakailah pakaian dan sarana pelindung dan pakailah selalu kaca mata pelindung. Dengan memakai pakaian dan sarana pelindung, misalnya kedok anti debu (masker), sepatu tertutup yang tidak licin, helm pelindung atau pemalut telinga sesuai dengan pekerjaan yang dilakukan dengan perkakas listrik, bahaya terjadinya luka-luka dapat dikurangi.

Jagalah supaya perkakas listrik tidak dihidupkan secara tidak disengaja. Perhatikan bahwa perkakas listrik dalam penyetelan mati, jika steker disambungkan pada pengadaan listrik dan/atau baterai, jika perkakas listrik diangkat atau dibawa. Jika selama mengangkat perkakas listrik jari Anda berada pada tombol untuk menghidupkan dan mematikan atau perkakas listrik yang dalam penyetelan hidup disambungkan pada listrik, dapat terjadi kecelakaan.

Lepaskan semua perkakas-perkakas penyetelan atau kunci-kunci pas sebelum perkakas listrik dihidupkan. Perkakas atau kunci yang berada di dalam bagian yang berputar dapat mengakibatkan terjadinya luka-luka.

Aturkan badan sedemikian sehingga Anda bisa bekerja dengan aman. Berdirilah secara mantap dan jagalah selalu keseimbangan. Dengan demikian Anda bisa mengendalikan perkakas listrik dengan lebih baik, jika terjadi sesuatu dengan tiba-tiba.

Pakailah pakaian yang cocok. Janganlah memakai pakaian yang longgar atau perhiasan. Jagalah supaya rambut, pakaian dan sarung tangan tidak masuk dalam bagian-bagian perkakas yang bergerak. Pakaian yang longgar, rambut panjang atau perhiasan dapat tersangkut dalam bagian perkakas yang bergerak.

Jika ada kemungkinan untuk memasangkan sarana penghisapan dan penampungan debu, perhatikan bahwa sarana-sarana ini telah dipasangkan dan digunakan dengan betul. Penggunaan sarana penghisa- pan bisa mengurangi bahaya yang disebabkan debu.

Penggunaan dan penanganan perkakas listrik de- ngan seksama Janganlah membebankan perkakas listrik terlalu

berat. Gunakan selalu perkakas listrik yang cocok untuk pekerjaan yang dilakukan. Dengan perkakas listrik yang cocok Anda bekerja lebih baik dan lebih aman dalam batas-batas kemampuan yang ditentukan.

Janganlah menggunakan perkakas listrik yang tombolnya rusak. Perkakas listrik yang tidak bisa dihidupkan atau dimatikan, berbahaya dan harus direparasikan.

Tariklah steker dari stopkontak dan/atau keluarkan baterai, sebelum Anda melakukan penyetelan pada perkakas listrik, mengganti alat-alat kerja atau sebelum menyimpan perkakas listrik. Tindakan keselamatan kerja ini mengurangi bahaya perkakas listrik hidup secara tidak disengaja.

Simpanlah perkakas listrik yang tidak digunakan di luar jangkauan anak-anak. Janganlah mengizinkan orang-orang yang tidak mengenal perkakas listrik ini atau yang belum membaca petunjuk-petunjuk ini, menggunakan perkakas listrik ini. Perkakas listrik bisa menjadi berbahaya, jika digunakan oleh orang-orang yang tidak mengenalnya.

Rawatlah perkakas listrik dengan seksama. Periksalah, apakah bagian-bagian perkakas listrik yang bergerak berfungsi dengan baik dan tidak tersangkut, apakah ada bagian-bagian yang patah atau rusak sedemikian, sehingga dapat mempengaruhi jalannya perkakas listrik. Biarkan bagian-bagian perkakas yang rusak direparasikan, sebelum Anda mulai menggunakan perkakas listrik. Banyak kecelakaan terjadi karena perkakas listrik tidak dirawat de- ngan seksama.

Perhatikan supaya alat-alat pemotong selalu tajam dan bersih. Alat-alat pemotong dengan mata-mata pemotong yang tajam dan dirawat dengan seksama tidak mudah tersangkut dan lebih mudah dikendalikan.

Gunakanlah semua perkakas listrik, aksesori, alat-alat kerja dsb. sesuai dengan petunjuk-petunjuk. Perhatikan syarat-syarat kerja dan macam pekerjaan yang dilakukan. Penggunaan perkakas listrik untuk macam pekerjaan yang tidak cocok dengan kegunaannya bisa mengakibatkan keadaan yang berbahaya.

Servis Biarkan perkakas listrik Anda direparasikan hanya

oleh orang-orang ahli yang berpengalaman dan hanya dengan menggunakan suku cadang yang asli. Dengan demikian terjamin keselamatan kerja dengan perkakas listrik ini secara berkesinambungan.

OBJ_BUCH-1388-005.book Page 27 Wednesday, July 13, 2016 3:41 PM

28 | Bahasa Indonesia

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Petunjuk-petunjuk untuk keselamatan kerja dengan palu Pakailah pemalut telinga. Jika Anda mendengar suara

bising untuk waktu yang lama, daya pendengaran bisa berkurang.

Gunakanlah gagang tambahan-gagang tambahan, jika ini dipasok bersama dengan perkakas listrik. Perkakas listrik yang tidak bisa dikendalikan bisa mengakibatkan terjadinya luka-luka.

Peganglah perkakas listrik hanya pada pegangan yang terisolir jika Anda melakukan pekerjaan yang memungkinkan alat pemotong ini menjalin kontak dengan kabel listrik yang tidak terlihat atau kabelnya sendiri. Alat kerja yang bersentuhan dengan kabel yang bertegangan dapat mengakibatkan bagian-bagian logam dari perkakas listrik juga ikut dialiri tegangan arus dan mengakibatkan terjadinya kontak listrik.

Petunjuk-petunjuk lainnya untuk keselamatan kerja dan untuk penggunaan Perhatikanlah tegangan jaringan listrik! Tegangan

jaringan listrik harus sesuai dengan tegangan listrik yang tercantum pada label tipe perkakas listrik.

Gunakanlah alat detektor logam yang cocok untuk mencari kabel dan pipa pengadaan yang tidak terlihat, atau hubungi perusahaan pengadaan setempat. Sentuhan dengan kabel-kabel listrik bisa mengakibatkan api dan kontak listrik. Pipa gas yang dirusak bisa mengakibatkan ledakan. Pipa air yang dirusak mengakibatkan barang-barang menjadi rusak.

Kencangkan gagang tambahan sampai mantap, pegangkan perkakas listrik selama bekerja dengannya secara kencang dengan kedua belah tangan dan berdirilah secara tegap. Jika perkakas listrik dipegang dengan kedua belah tangan, perkakas listrik dapat dikendalikan dengan baik.

Pilihkan jenis penggunaan dan alat kerja yang cocok bagi bahan yang akan dikerjakan.

Memasang alat kerja SDS-max: Periksalah apakah alat kerja sudah terkunci dengan cara menariknya.

Gantikanlah segera kap pelindung debu yang rusak (menjadi tidak mulus). Kap pelindung debu menghindarkan debu pemboran masuk ke dalam pemegang alat kerja selama perkakas listrik digunakan. Selama memasang alat kerja, perhatikanlah supaya kap pelindung debu tidak menjadi rusak.

Debu dari berbagai bahan misalnya cat yang mengadung timbel, beberapa jenis kayu, bahan mineral dan logam bisa berbahaya bagi kesehatan dan mengakibatkan reaksi alergi, penyakit saluran pernafasan dan/atau kanker. Bahan-bahan yang me- ngandung asbes hanya boleh dikerjakan oleh orang-orang ahli yang berpengalaman.

Gunakanlah hanya penghisap debu yang cocok untuk menghisap bahan yang dikerjakan.

Perhatikanlah supaya ada pertukaran udara di tempat kerja.

Kami anjurkan supaya Anda memakai kedok anti debu dengan saringan (filter) kelas P2.

Taatilah peraturan-peraturan untuk bahan-bahan yang dikerjakan yang berlaku di negara Anda.

Jika alat kerja memblok, matikanlah segera perkakas listrik. Kendorkan alat kerjanya.

Sebelum menghidupkan kembali perkakas listrik, periksalah apakah alat kerjanya sudah tidak memblok. Jika perkakas listrik dihidupkan, padahal mata bor masih memblok, terjadi momen reaksi yang besar.

Untuk menghemat energi, hidupkan perkakas listrik hanya jika Anda menggunakannya.

Sebelum meletakkan perkakas listrik, tunggulah sampai perkakas berhenti memutar. Alat kerja bisa tersangkut dan membuat perkakas listrik tidak bisa dikendalikan.

Penghindar hidup ulang Penghindar hidup ulang menghindarkan perkakas listrik dalam jenis penggunaan memahat hidup secara tidak terkendali setelah pengadaan listrik mati. Untuk menghidupkan kembali perkakas listrik,

tombol untuk menghidupkan dan mematikan disetelkan pada posisi mati dan perkakas listrik dihidupkan kembali.

Simbol-Simbol Simbol-simbol berikut penting pada waktu membaca dan untuk mengerti petunjuk-petunjuk untuk penggunaan. Lihat dan ingati simbol-simbol dan artinya. Penafsiran yang betul dari simbol-simbol sangat membantu Anda untuk menggunakan perkakas listrik dengan jitu dan sesuai dengan petunjuk untuk keselamatan kerja.

Peredaman getaran (GBH 8-45 DV)

Peredaman getaran yang terpadu mengurangi getaran yang terjadi.

Simbol Arti GBH 8-45 D/ GBH 8-45 DV: Mesin bor pakai hamering Bidang berwarna abu-abu: gagang (permukaan yang dipegang dengan isolasi) Nomor model

Bacalah semua petunjuk-petunjuk untuk keselamatan kerja dan petunjuk- petunjuk untuk penggunaan

OBJ_BUCH-1388-005.book Page 28 Wednesday, July 13, 2016 3:41 PM

Bahasa Indonesia | 29

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Pasokan standar Mesin bor pakai hamering, gagang tambahan. Alat kerja dan aksesori lainnya yang ada pada gambar atau yang dijelaskan tidak termasuk pasokan standar perkakas listrik. Semua aksesori yang tersedia dapat Anda lihat di dalam program aksesori.

Penggunaan alat Perkakas listrik ini cocok untuk membor dengan hamering pada beton, batu bata dan batu-batuan serta untuk pekerjaan memahat.

Data teknis Data-data teknis dari produk ini tertera di dalam tabel pada halaman 37 dari petunjuk-petunjuk untuk penggunaan ini. Data-data berlaku untuk tegangan nominal [U] 230 V. Pada tegangan yang lebih rendah dan pada model khusus mancanegara data-data ini bisa berlainan.

Sebelum melakukan semua pekerjaan pada perkakas listrik, tarikkan steker dari stopkontak

Pakailah sarung tangan pelindung

Pakailah pemalut telinga

Pakailah kaca mata pelindung

Arah gerakan

Arah reaksi

Kegiatan berikut

Kegiatan yang dilarang

Membor pakai hamering

Memahat

Vario-Lock

Menghidupkan perkakas listrik

Mematikan perkakas listrik

Mengunci tombol untuk menghidupkan dan mematikan Membuka penguncian tombol untuk menghidupkan dan mematikan Kecepatan putaran/banyaknya getaran rendah

Kecepatan putaran/banyaknya getaran tinggi

Pemegang alat kerja

Ujung pegang dari alat kerja harus dilumasi sedikit

Simbol Arti Display tanda servis

P1 Masukan nominal E Daya tiap-tiap getar sesuai dengan

EPTA-Procedure 05/2009 n0 Kecepatan putaran tanpa beban

Penghindar hidup ulang

Diameter maks. pemboran Beton

Tembok

Mata bor berulir

Mata bor untuk menembus

Mata bor pipa

Berat sesuai dengan EPTA-Procedure 01:2014 Klasifikasi keamanan

LwA Nilai tenaga bunyi LpA Tekanan bunyi ah Nilai jumlah getaran K Ketidak tepatan

Simbol Arti

OBJ_BUCH-1388-005.book Page 29 Wednesday, July 13, 2016 3:41 PM

30 | Bahasa Indonesia

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Memasang dan menggunakan Tabel berikut ini menunjukkan tujuan dari kegiatan pemasangan dan pengoperasian perkakas listrik. Petunjuk-petunjuk untuk tujuan dari kegiatan dijelaskan dengan gambar-gambar. Tergantung dari jenis pengoperasian, dibutuhkan berbagai kombinasi yang berbeda dari petunjuk-petunjuk. Taatilah petunjuk-petunjuk untuk keselamatan kerja.

Rawatan dan kebersihan Perkakas listrik dan lubang ventilasi harus selalu

dibersihkan supaya perkakas bisa digunakan dengan baik dan aman.

Jika kabel listrik harus digantikan, pekerjaan ini harus dilakukan oleh Bosch atau Service Center untuk perkakas listrik Bosch yang resmi, supaya keselamatan kerja selalu terjamin.

Kegiatan Gambar Perhatikanlah Halaman Memasang alat kerja SDS-max 1 38

Melepaskan alat kerja SDS-max 2 38

Memilih jenis penggunaan 3 39

Merubah penyetelan pahat (Vario-Lock)

4 39

Memutar gagang tambahan 5 39

Menghidupkan/mematikan perkakas listrik sewaktu membor

6 40

Menghidupkan/mematikan perkakas listrik sewaktu memahat

7 40

Menyetel kecepatan putaran 8 40

Perhatikan display tanda servis 9 41

OBJ_BUCH-1388-005.book Page 30 Wednesday, July 13, 2016 3:41 PM

Ting Vit | 31

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Display tanda servis (lihat gambar 9, halaman 41) Jika karbon dinamo habis, perkakas listrik akan berhenti sendiri. Hal ini akan diperingatkan kira-kira 8 jam sebelumnya oleh display tanda servis yang menyala atau berkedip-kedip. Perkakas listrik harus dikirimkan ke Service Center untuk diservis, alamatnya lihat bab Layanan pasca beli dan konseling terkait pengoperasian. Jika display tanda servis berkedip-kedip secara merata, perkakas listrik rusak. Dalam hal ini, janganlah meneruskan penggunaan perkakas listrik, melainkan kirimkannya segera ke Service Center Bosch.

Layanan pasca beli dan konseling terkait pengoperasian Jika Anda hendak menanyakan sesuatu atau memesan suku cadang, sebutkan selalu nomor model yang terdiri dari 10 angka dan tercantum pada label tipe pekakas. Layanan pasca beli Bosch menjawab semua pertanyaan Anda terkait reparasi dan maintenance serta suku cadang produk ini. Gambar tiga dimensi dan informasi terkait suku cadang dapat Anda lihat di: www.bosch-pt.com Tim konseling pengoperasian dari Bosch dengan senang hati membantu Anda, jika Anda hendak bertanya tentang produk- produk kami dan aksesorisnya.

Indonesia PT. Multi Mayaka Kawasan Industri Pulogadung Jalan Rawa Gelam III No. 2 Jakarta 13930 Indonesia Tel.: (021) 46832522 Fax: (021) 46828645/6823 E-Mail: sales@multimayaka.co.id www.bosch-pt.co.id

Cara membuang Perkakas listrik, aksesori dan kemasan sebaiknya didaur ulangkan sesuai dengan upaya untuk melindungi lingkungan hidup. Janganlah membuang perkakas listrik dalam sampah rumah tangga!

Perubahan dapat terjadi tanpa pemberitahuan sebelumnya.

Ting Vit

Cnh bo tng qut cch s dng an ton dng c in cm tay

c k mi cnh bo an ton v hng dn. Khng tun th mi

cnh bo v hng dn c lit k di y c th b in git, gy chy v/hay b thng tt nghim trng.

Hy gi tt c ti liu v cnh bo v hng dn tham kho v sau.

Thut ng dng c in cm tay trong phn cnh bo l cp n s s dng dng c in cm tay ca bn, loi s dng in ngun (c dy cm in) hay vn hnh bng pin (khng dy cm in).

Khu vc lm vic an ton Gi ni lm vic sch v nh sng. Ni lm

vic ba bn v ti tm d gy ra tai nn.

Khng vn hnh dng c in cm tay trong mi trng d gy n, chng hn nh ni c cht lng d chy, kh t hay rc. Dng c in cm tay to ra cc tia la nn c th lm rc bn chy hay bc khi.

Khng tr em hay ngi n xem ng gn khi vn hnh dng c in cm tay. S phn tm c th gy ra s mt iu khin.

An ton v in Phch cm ca dng c in cm tay phi

thch hp vi cm. Khng bao gi c ci bin li phch cm di mi hnh thc. Khng c s dng phch tip hp ni tip t (dy mt). Phch cm nguyn bn v cm ng loi s lm gim nguy c b in git.

Trnh khng thn th tip xc vi t hay cc vt c b mt tip t nh ng ng, l si, hng ro v t lnh. C nhiu nguy c b in git hn nu c th bn b tip hay ni t.

Khng c dng c in cm tay ngoi ma hay tnh trng m t. Nc vo my s lm tng nguy c b in git.

Khng c lm dng dy dn in. Khng bao gi c nm dy dn xch, ko hay rt phch cm dng c in cm tay. Khng dy gn ni c nhit cao, du nht, vt nhn bn hay b phn chuyn ng. Lm hng hay cun ri dy dn lm tng nguy c b in git.

OBJ_BUCH-1388-005.book Page 31 Wednesday, July 13, 2016 3:41 PM

32 | Ting Vit

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Khi s dng dng c in cm tay ngoi tri, dng dy ni thch hp cho vic s dng ngoi tri. S dng dy ni thch hp cho vic s dng ngoi tri lm gim nguy c b in git.

Nu vic s dng dng c in cm tay ni m t l khng th trnh c, dng thit b ngt mch t ng (RCD) bo v ngun. S dng thit b thit b ngt mch t ng RCD lm gim nguy c b in git.

An ton c nhn Hy tnh to, bit r mnh ang lm g v hy

s dng thc khi vn hnh dng c in cm tay. Khng s dng dng c in cm tay khi ang mt mi hay ang b tc ng do cht gy nghin, ru hay dc phm gy ra. Mt thong mt tp trung khi ang vn hnh dng c in cm tay c th gy thng tch nghim trng cho bn thn.

S dng trang b bo h c nhn. Lun lun eo knh bo v mt. Trang b bo h nh khu trang, giy chng trt, nn bo h, hay dng c bo v tai khi c s dng ng ni ng ch s lm gim nguy c thng tt cho bn thn.

Phng trnh my khi ng bt ng. Bo m cng tc my v tr tt trc khi cm vo ngun in v/hay lp pin vo, khi nhc my ln hay khi mang xch my. Ngng ngn tay vo cng tc my xch hay kch hot dng c in cm tay khi cng tc v tr m d dn n tai nn.

Ly mi cha hay kha iu chnh ra trc khi m in dng c in cm tay. Kha hay cha cn gn dnh vo b phn quay ca dng c in cm tay c th gy thng tch cho bn thn.

Khng rn ngi. Lun lun gi t th ng thch hp v thng bng. iu ny to cho vic iu khin dng c in cm tay tt hn trong mi tnh hung bt ng.

Trang phc thch hp. Khng mc qun o rng lng thng hay mang trang sc. Gi tc, qun o v gng tay xa khi cc b phn chuyn ng. Qun o rng lng thng, trang sc hay tc di c th b cun vo cc b phn chuyn ng.

Nu c cc thit b i km ni my ht bi v cc ph kin khc, bo m cc thit b ny c ni v s dng tt. Vic s dng cc thit b gom ht bi c th lm gim cc c hi lin quan n bi gy ra.

S dng v bo dng dng c in cm tay Khng c p my. S dng dng c in

cm tay ng loi theo ng ng dng ca bn. Dng c in cm tay ng chc nng s lm vic tt v an ton hn theo ng tin m my c thit k.

Khng s dng dng c in cm tay nu nh cng tc khng tt v m c. Bt k dng c in cm tay no m khng th iu khin c bng cng tc l nguy him v phi c sa cha.

Rt phch cm ra khi ngun in v/hay pin ra khi dng c in cm tay trc khi tin hnh bt k iu chnh no, thay ph kin, hay ct dng c in cm tay. Cc bin php ngn nga nh vy lm gim nguy c dng c in cm tay khi ng bt ng.

Ct gi dng c in cm tay khng dng ti ni tr em khng ly c v khng cho ngi cha tng bit dng c in cm tay hay cc hng dn ny s dng dng c in cm tay. Dng c in cm tay nguy him khi trong tay ngi cha c ch cch s dng.

Bo qun dng c in cm tay. Kim tra xem cc b phn chuyn ng c b sai lch hay kt, cc b phn b rn nt v cc tnh trng khc c th nh hng n s vn hnh ca my. Nu b h hng, phi sa cha my trc khi s dng. Nhiu tai nn xy ra do bo qun dng c in cm tay ti.

Gi cc dng c ct bn v sch. Bo qun ng cch cc dng c ct c cnh ct bn lm gim kh nng b kt v d iu khin hn.

S dng dng c in cm tay, ph kin, u ci v. v., ng theo cc ch dn ny, hy lu n iu kin lm vic v cng vic phi thc hin. S s dng dng c in cm tay khc vi mc ch thit k c th to nn tnh hung nguy him.

Bo dng a dng c in cm tay ca bn n th

chuyn mn bo dng, ch s dng ph tng ng chng loi thay. iu ny s m bo s an ton ca my c gi nguyn.

Cc Cnh Bo An Ton Cho Khoan Ba Hy mang dng c bo v tai. tai trn tip

xc vi ting n c th lm mt thnh gic.

OBJ_BUCH-1388-005.book Page 32 Wednesday, July 13, 2016 3:41 PM

Ting Vit | 33

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Hy s dng tay nm ph, nu nh c giao km vi dng c. S mt iu khin c th gy thng tch cho bn thn.

Nm gi dng c in ni phn nm cch in khi thc hin vic gia cng ni dng c ct c th chm vo dy in khng nhn thy c hay chnh dy ca my. Dng c ct chm phi dy c in c th lm cho cc b phn kim loi khng c bao bc c in v git ngi vn hnh my.

Cc Hng Dn An Ton v Vn Hnh B Sung Tun th theo ng in th! in th ngun

chnh phi ng vi cc d liu c ghi trn nhn my.

S dng thit b d tm thch hp xc nh cc ng hay ng dn cng ch nm m trong khu vc lm vic hay lin h vi cty cng trnh phc li nh gip . Tip xc vi dy in c th dn n chy v b in git. Chm ng dn kh t c th gy n. Lm thng ng dn nc c th lm h hi ti sn hay c th gy ra in git.

Vn tht cht tay nm ph, gi my tht cht bng c hai tay trong khi lm vic v lun lun gi t th ng thch hp v cn bng trong mi lc. My c iu khin an ton bng c hai tay.

Chn ng ch hot ng v dng c ng dng thch hp cho vt liu c gia cng.

Lp dng c ng dng SDS-max: Kim tra xem ci chc cha bng cch ko th dng c ra.

Thay chp bo v ngn bi b h hng ngay lp tc. Chp bo v ngn bi ngn cn phn ln s xm nhp ca bi khoan vo trong b phn g lp dng c trong thi gian hot ng. Khi lp dng c vo, hy lu rng chp bo v ngn bi khng b lm h hng.

Bi t cc vt liu nh l lp ph c cha ch, mt s loi g, khong cht v kim loi c th gy nguy hi n sc khe v gy d ng, dn n s nhim trng ng h hp v/hay gy ung th. Vt liu cha aming c th ch nn cho cc th chuyn mn gia cng.

Cch xa mc c th c, s dng h thng ht thch hp cho loi vt liu.

To khng kh thng thong ni lm vic. Khuyn ngh nn mang mt n phng c c

b lc cp P2.

Tun th cc qui nh ca quc gia bn lin quan n loi vt liu gia cng.

Nu gi s nh dng c ng dng b kt cng, hy tt my. Lm li dng c ng dng ra.

Trc khi cho dng c in hot ng, bo m rng dng c ng dng chuyn ng c t do. Khi m my m dng c ng dng b kt cng, lc xon vn cao c th xy ra.

tit kim nng lng, ch cho dng c in hot ng khi s dng.

Lun lun i cho my hon ton ngng hn trc khi t xung. Dng c lp vo my c th b kp cht dn n vic dng c in cm tay b mt iu khin.

Chng s khi ng li Trong ch c, b phn chng s khi ng li phng chng my khi ng ngoi tm iu khin sau khi b mt in.

vn hnh li, bt cng tc Tt/M v v tr Tt v khi ng my li.

Cc Biu Tng Cc biu tng sau y mang ngha quan trng suy din v hiu cc hng dn s dng. Xin vui lng lu n cc biu tng v ngha ca chng. S hiu ng cc biu tng s gip bn s dng my mt cch tt v an ton hn.

B Phn Gim Chn (GBH 8-45 DV)

B phn gim chn ni kt lm gim s rung chn pht sinh.

Biu Tng Ngha GBH 8-45 D/ GBH 8-45 DV: Khoan Ba

Phm vi c mu xm: Tay nm (phn nm c cch in)

M s my

c tt c cc cnh bo an ton v mi hng dn

Trc khi thc hin bt c vic g trn my, rt phch cm ra khi in ngun

OBJ_BUCH-1388-005.book Page 33 Wednesday, July 13, 2016 3:41 PM

34 | Ting Vit

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Cc mn c giao Khoan ba xoay, tay nm ph. Dng c ng dng v cc ph kin khc c trnh by hay m t khng phi l mt phn ca khun kh tiu chun hng c giao.

Bn c th tm thy thng tin m t tng qut cc ph kin trong chng trnh ph kin ca chng ti.

Dnh s dng cho My c thit k khoan ba b-tng, gch v cng nh dng c.

Thng s k thut Tnh nng k thut ca my c lit k trong Bng trang 37 ca cc hng dn s dng ny.

Cc gi tr cho c hiu lc cho in th danh nh [U] 230 V. i vi in th thp hn v cc loi my dnh ring cho mt s quc gia, cc gi tr ny c th thay i.

Hy mang gng tay bo v

Mang dng c bo v tai

Mang knh an ton/knh bo h lao ng

Chiu chuyn ng

Chiu phn ng

Bc hnh ng k tip

Hnh ng b cm

Khoan Ba

c

Vario-Lock (Kha nhiu v tr)

M cng tc

tt my

Cng tc Tt/M c kha t- chy Nh cng tc Tt/M

Tc chm/tn sut p

Tc cao/tn sut p

Phn lp dng c

Bi mt t m bi trn vo chui lp dng c ng dng

n Cnh Bo Hot ng

P1 Cng sut vo danh nh

Biu Tng Ngha E Nng lng va p ca tng hnh

trnh da theo Qui Chun-EPTA 05/2009

n0 Tc khng ti Chng s khi ng li

ng knh khoan, ti a B-tng

Cng trnh xy gch

Mi khoan xon

Mi khoan xuyn ph

Mi khoan li

Trng lng theo Qui trnh EPTA- Procedure 01:2014 (chun EPTA 01:2014) Cp bo v

LwA Cp cng sut m thanh LpA Cp p lc m thanh ah Tng tr s rung K Bt nh

Biu Tng Ngha

OBJ_BUCH-1388-005.book Page 34 Wednesday, July 13, 2016 3:41 PM

Ting Vit | 35

Bosch Power Tools 1 609 92A 1TX | (13.7.16)

Lp v Vn Hnh Biu bng sau y ch r cc thao tc cho mc ch lp rp v vn hnh dng c in. S hng dn cho tng thao tc mc ch c trnh by bn cnh. Ty theo loi hnh ng dng, s kt hp mt s hng dn l cn thit. Tun th cc hng dn cho s an ton.

Loi cng vic Hnh nh

Xin vui lng tun th Trang

Lp dng c ng dng SDS-max

1 38

Tho dng c ng dng SDS-max

2 38

Chn Ch Hot ng 3 39

Thay i t th ca mi c (Vario-Lock/Kha nhiu v tr)

4 39

Xoay Tay Nm Ph 5 39

Tt/M my Ch Khoan 6 40

Tt/M my Ch c 7 40

iu chnh tc 8 40

Tun theo n cnh bo hot ng

9 41

OBJ_BUCH-1388-005.book Page 35 Wednesday, July 13, 2016 3:41 PM

36 | Ting Vit

1 609 92A 1TX | (13.7.16) Bosch Power Tools

Bo Dng V Lm Sch c an ton v my hot ng ng chc

nng, lun lun gi my v cc khe thng gi c sch.

Nu nh cn phi thay dy dn in th cng vic ny phi do hng Bosch, hay mt i l c Bosch y nhim thc hin trnh gp s nguy him do mt an ton.

n Cnh Bo Hot ng (xem hnh 9, trang 41)

Khi chi than mn ht, my t tt. iu ny c bo trc khong 8 gi ng h bng s sng ln hay nhp nhy ca n cnh bo hot ng . Sau my phi c mang n i l phc v hu mi. a ch ca cc i l ny c lit k trong Phn Dch V Sau Khi Bn v Dch V ng Dng.

n cnh bo hot ng nhy sng cch qung, my b h hng. Trong trng hp ny, khng c tip tc s dng my v hy gi ngay my n i l bo hnh bo tr sa cha.

Dch V Sau Khi Bn v Dch V ng Dng Trong mi th t giao dch v n t hng ph tng, xin vui lng lun vit 10 con s c ghi trn nhn my.

B phn phc v hng sau khi bn ca chng ti s tr li cc cu hi lin quan n vic bo tr v sa cha cc sn phm cng nh cc ph tng thay th ca bn. Hnh nh chi tit v thng tin ph tng thay th c th tm hiu theo a ch di y: www.bosch-pt.com B phn dch v ng dng Bosch s hn hnh tr li cc cu hi lin quan n cc sn phm ca chng ti v linh kin ca chng.

Vit Nam Cng ty Trch Nhim Hu Hn Robert Bosch Vit Nam, PT/SVN Tng 10,194 Golden Building 473 in Bin Ph Phng 25, Qun Bnh Thnh Thnh Ph H Ch Minh Vit Nam Tel.: (08) 6258 3690 Ext 413 Fax: (08) 6258 3692 hieu.lagia@vn.bosch.com www.bosch-pt.com

Thi b My, linh kin v bao b phi c phn loi ti ch theo hng thn thin vi mi trng.

Khng c thi b dng c in vo chung vi rc sinh hot!

c quyn thay i ni dung m khng phi thng bo trc.

OBJ_BUCH-1388-005.book Page 36 Wednesday, July 13, 2016 3:41 PM

| 37

Bosch Power Tools 1 609 92A 1TX | (16.11.15)

GBH 8-45 D GBH 8-45 DV

3 611 B65 1.. 3 611 B65 0.. P1 W 1500 1500 E J 12,5 12,5 n0 min-1 0 305 0 305

max.

mm 45 45

mm 80 80

mm 125 125

kg 8,2 8,9 II II

OBJ_BUCH-1388-005.book Page 37 Monday, November 16, 2015 2:58 PM

1 609 92A 1TX | (16.11.15) Bosch Power Tools

38 |

1

2

3

2

4

5

1

2

1

OBJ_BUCH-1388-005.book Page 38 Monday, November 16, 2015 2:58 PM

| 39

Bosch Power Tools 1 609 92A 1TX | (16.11.15)

1

3

2

2

1

3

4

5

OBJ_BUCH-1388-005.book Page 39 Monday, November 16, 2015 2:58 PM

1 609 92A 1TX | (16.11.15) Bosch Power Tools

40 |

8

6

7

OBJ_BUCH-1388-005.book Page 40 Monday, November 16, 2015 2:58 PM

Manualsnet FAQs

If you want to find out how the 0 611 265 160 Bosch works, you can view and download the Bosch 0 611 265 160 Hammer Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Bosch 0 611 265 160 as well as other Bosch manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Bosch 0 611 265 160. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Bosch 0 611 265 160 Hammer Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Bosch 0 611 265 160 Hammer Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Bosch 0 611 265 160 Hammer Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Bosch 0 611 265 160 Hammer Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Bosch 0 611 265 160 Hammer Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.