BMW X5 4.4i SUV X5 Series 2003 Owner's Manual PDF
Summary of Content for BMW X5 4.4i SUV X5 Series 2003 Owner's Manual PDF
Owner's Manual for Vehicle
X5 3.0i X5 4.4i X5 4.6is
Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:
Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new BMW. The manual contains important data and instructions intended to assist you in obtaining maximum satisfaction from your BMW's unique array of advanced technical fea- tures. It also contains information on vehicle maintenance designed to enhance operating safety while simultaneously helping you to maintain your BMW's value throughout an extended service life. For additional information refer to the supple- mental manuals.
This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information.
We wish you an enjoyable driving experience.
BMW AG
Vorwort
Contents
2002 Bayerische M Aktiengesellschaft Munich, Germany Reprinting, including written consent of BM Order No. 01 41 0 157 098 US English IX/2002 Printed in Germany Printed on environmentally friendly paper bleached without chlorine, suitable for recycling
N o
te s
About this Ow Symbols use The individua Status at time For your own Symbol on ve Service and W Reporting sa
urity systems:
system 30 osing te control 31
osing lock 34 osing ide 35
39 windows 40 oof with glass
Electric power Sliding/tilt sunr
moonroof 42
O ve
rv ie
w
C o
n tr
o ls
a n
d f
e at
u re
sner's Manual 8 d 8 l vehicle 8 of printing 9
safety 9 hicle parts 10 arranty 10
fety defects 10
Cockpit 14 Instrument cluster 15 Indicator and warning lamps 19 Steering wheel with multifunction
buttons 23 Warning triangle 24 First-aid kit 24 Refueling 24 Fuel specifications 26 Tire inflation pressures 26
Locks and sec Keys 30 Central locking Opening and cl
via the remo Opening and cl
via the door Opening and cl
from the ins Liftgate 36 Tailgate 37 Alarm system
sition 44
t 45
47 t backrest 8
steering wheel
1 52
otoren Werke
excerpts, only with the W AG, Munich.
Adjustments: Safe seating po Seats 44 Mechanical sea Power seat 46 Head restraints Power rear-sea
adjustment 4 Safety belts 49 Seat, mirror and
memory 50 Seat heating 5 Steering wheel
.
Steering wheel heating 53 Mirrors 53
Inhalt
5n
w
Cabin convenience:
BMW Universal Transmitter 112
u re
s Passenger safety systems: Airbags 55
Technology for safety and driving convenience:
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Glove compartment 115 Storage compartments 116 Cellular phone 116 Beverage holder 116 Glasses compartment 117 Ashtray, front 117 Ashtray, rear 118 Cigarette lighter, rear 118
Loading and transporting: Ski bag 119 Cargo area
Fold the rear backrests down 120 Cargo area cover 121 Partition net 122 Cover panels in the cargo area 123
sensor 68 Cruise control 71
Everything under control:
lamps 100 Fog lamps 100 Interior lamps 101
Re pa
ir s
Da ta
In de
x
Power outlets 124 Pull-out cargo floor 124
Cargo loading 126 Roof-mounted luggage rack 127
C o
n tr
o ls
a n
d f
e at Transporting children safely 58
Vehicle Memory, Key Memory 61
Driving: Ignition lock 62 Starting the engine 62 Switching off the engine 63 Parking brake 64 Manual transmission 64 Automatic transmission with
Steptronic 65 Indicator/Headlamp flasher 68 Washer/Wiper system/Rain
Park Distance Control PDC 90 Dynamic Stability Control
DSC 91 Hill Descent Control HDC 93 Self-leveling suspension 94 2-axle self-leveling
suspension 94 Tire Pressure Monitor RDC 97 Adaptive brake light 98
Lamps: Parking lamps/Low beams 99 Instrument lighting 100 High beams/Standing
Odometer, outside temperature display 73
Tachometer 74 Energy control 74 Temperature gauge 75 Fuel gauge 75 Coolant temperature gauge 76 Service Interval Display 76 Check Control 77 Computer 80 Multi-Information Display
MID 81 Digital clock in the MID 82 Computer in the MID 85
Controlling the climate for pleasant driving: Air conditioner 102 Automatic climate control 105 Roller sun blinds 111 Independent ventilation
system 111
Contents
re s
Replacement procedures:
ce Special operating instructions: Care and maintenance:
O w
n e
r se
rv ic
e p
ro c
e d
u Onboard tool kit 150 Windshield wiper blades 150 Lamps and bulbs 151 Changing a wheel 154 Battery 160 Fuses 160
Assistance, giving and receiving: Jump-starting 162 Towing the vehicle 164
Under the hood: Hood 139 Engine compartment
O p
e ra
ti o
n , m
ai n
te n
an
Break-in procedures 130 Driving your BMW X5 131 General driving notes 132 Antilock Brake System 132 Brake system 132
Wheels and tires: Tire inflation pressures 134 Tire condition 134 Tire replacement 135 Wheel and tire
combinations 137 Winter tires 138 Snow chains 138
The BMW Maintenance System 145
Laws and regulations: Technical modifications 146 California Proposition
65 Warning 146 OBD interface socket 147
essentials 140 Washer fluid 141 Engine oil 141 Coolant 143 Brake fluid 144
7n
w
d at
a
n d
e xEngine specifications 168
Dimensions 169 Everything from A to Z 174
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
T e
c h
n ic
al IWeights 170 Capacities 171
8n
ndividual vehicle
ying your BMW, you have ed in favor of a model with individ- d equipment and features. This r's Manual describes all models quipment that BMW offers within me group.
pe you will understand that ment and features are included ou might not have chosen for your le. Any differences can easily be fied, since all optional extras and al equipment are marked with an sk
*
.
r BMW features equipment which
Notes
About this Owner's Manual We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find certain topics is by using the detailed index at the end. If you desire an initial overview of your vehicle, this can be found in the first chapter.
Should you wish to sell your BMW at some time in the future, please remember to hand over the Owner's Manual to the new owner; it is an important part of the vehicle.
If you have any questions, your
Symbols used Indicates precautions that must be followed precisely in order to
avoid the possibility of personal injury and serious damage to the vehicle.
Contains information that will assist you in gaining the optimum
benefit from your vehicle and enable you to care more effectively for your vehicle.
Refers to measures that can be taken to help protect the
environment.
described in this Owner's al, Supplementary Owner's Man- re enclosed. We ask you to read manuals as well.
BMW Sports Activity Vehicle center will be glad to advise you.
< Marks the end of a specific item of information.
* Indicates special equipment, country-specific equipment and optional extras.
Identifies systems or components, which can be activated or adapted
to suit an individual driver's require- ments Vehicle Memory, Key Memory, refer to page 61. Activation and adjustments on some of these systems can be performed at your BMW Sports Activity Vehicle center.
Notes Symbols The individual vehicle
The i On bu decid ualize Owne and e the sa
We ho equip that y vehic identi speci asteri
If you
9n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Important safety information! For your own safety, use genuine
ts and accessories approved by W. en you purchase accessories tested approved by BMW and Original W Parts, you simultaneously acquire assurance that they have been thor- hly tested by BMW to ensure imum performance when installed our vehicle.
W warrants these parts to be free defects in material and workman- .
W will not accept any liability for ages resulting from installation of
ts and accessories not approved by
Notes
Status at time of printing BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Nor can errors and omissions be entirely ruled out. You are therefore asked to appreciate that no legal claims can be entertained on the basis of the data, illustrations or descriptions in this manual.
For your own safety Use unleaded gasoline only. Fuels containing up to and including
10% ethanol or other oxygenates with up to 2.8% oxygen by weight that is, 15% MTBE or 3% methanol plus an equivalent amount of co-solvent will not void the applicable warranties respecting defects in materials or work manship. Field experience has indi- cated significant differences in fuel quality volatility, composition, addi- tives, etc. among gasolines offered for sale in the United States and Canada. The use of poor-quality fuels may result in driveability, starting and stalling problems especially under certain envi-
Re pa
ir s
Da ta
In de
x
W. W cannot test every product on the ket to determine whether it can be d on a BMW safely and without risk ither the vehicle, its operation, or its upants. inal BMW Parts, BMW Accessories other products approved by BMW, ther with professional advice on g these items, are available from all
W Sports Activity Vehicle centers.
Aktualitt bei Drucklegung
ronmental conditions such as high ambient temperature and high altitude. Should you encounter driveability prob lems which you suspect could be related to the fuel you are using, we recommend that you respond by switching to a recognized high-quality brand. Failure to comply with these recom- mendations may result in unscheduled maintenance. Obey pertinent relevant safety rules when you are handling gasoline.<
-
par BM Wh and BM the oug opt on y BM from ship BM dam par
-
BM BM mar use to e occ Orig and toge usin BM
10n
Notes
rting safety defects
llowing only applies to vehicles d and operated in the US.
believe that your vehicle has a t which could cause a crash or cause injury or death, you should diately inform the National ay Traffic Safety Administration A in addition to notifying BMW of America, LLC, P.O. Box 1227, ood, New Jersey 07675-1227,
hone 800-831-1117.
SA receives similar complaints, it pen an investigation, and if it that a safety defect exists in a
-
Repo The fo owne
If you defec could imme Highw NHTS North Westw Telep
If NHT may o finds
of vehicles, it may order a recall medy campaign. However, A cannot become involved in indi- l problems between you, your r, or BMW of North America, LLC.
ntact NHTSA, you may either call uto Safety Hotline toll-free at -424-9393 or 366-0123 in ington, D.C. area or write to: A, U.S. Department of Transpor- , Washington, D.C. 20590. You lso obtain other information about vehicle safety from the Hotline.
group and re NHTS vidua deale
To co the A 1-800 Wash NHTS tation can a motor
For your own safety
Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones including operation of any portable cellular phone from within the vehicle without using an externally mounted antenna or trans- ceiver equipment such as CB, walkie- talkie, ham radio or similar accessories, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the BMW Limited Warranty. Contact your BMW Sports Activity Vehicle center for additional
Service and Warranty This manual is supplemented by a Ser- vice and Warranty Information Booklet for US models or a Warranty and Ser- vice Guide Booklet for Canadian models.
We recommend that you read this publication thoroughly.
Your BMW is covered by the following warranties: >New Vehicle Limited Warranty >Rust Perforation Limited Warranty >Federal Emissions System Defect
Warranty >Federal Emissions Performance War
information.<
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any automotive repair establishment or individual using any certified auto- motive part.<
Symbol on vehicle parts Indicates that you should consult the relevant section of this
Owner's Manual for information on a particular part or assembly.
ranty >California Emissions Control System
Limited Warranty
Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
11n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
12n
13n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Overview
14n
Cockpit
ams 99
s 68
8
4 Washer/Wiper system/Rain sensor 68
5 Rear window defroster 103, 108
6 Central locking system 30
ard warning flashers
n, the entire surface
usting steering wheel 52
1 Parking lamps/Low be
2 Fog lamps 100
3 >Turn signal indicator >Standing lamps 100 >High beams 100 >Headlamp flasher 6 >Computer 80
5 3 0 d
e3 2 8
7 Haz
8 Hor
9 Adj
15n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Instrument cluster BMW X5 3.0i, 4.4i
Re pa
ir s
Da ta
In de
x
rn signal
3 Speedometer
4 Indicator and warning lamps 19 to 22
achometer and Energy Control 74
oolant temperature gauge 76
1 Fuel gauge 75
2 Indicator lamp for tu indicators 22
5 3 0 u s2
2 4
5 T
6 C
16n
Instrument cluster BMW X5 3.0i, 4.4i
odometer 73
ontrol 77
ometer 73
11 Computer display operation via the turn signal lever, refer to page 80: >
Outside temperature >
Average fuel consumption >
Cruising range >
Average speed
rvice Interval Display 76
12 Se
13 Selector lever and program display r automatic transmission* 65
dicator and warning mps 19 to 22
fo
14 In la
7 Indicator and warning lamps 19 to 22
8 Reset button for trip
9 Indicator for Check C
10 Odometer and trip od
5 3 0 u s2
2 5
17n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Instrument cluster BMW X5 3.0i, 4.4i
*
rn signal
g
rgy Control 74
gauge 76
7 Indicator and warning lamps 19 to 22
8 Reset button for trip odometer 7
9 Service Interval Display 76
10 Display for >
Trip odometer 73 >
Outside temperature display 7
Indicator for Check Control 77
Selector lever and program display
11
12
Da ta
In de
x
for automatic transmission* 65
CHECK button 77
Indicator and warning lamps 19 to 22
3
3
13
14
1 Fuel gauge 75
2 Indicator lamp for tu indicators 22
3 Speedometer
4 Indicator and warnin lamps 19 to 22
5 Tachometer and Ene
6 Coolant temperature
5 3 0 u s2
2 6
5 3 0 u s2
2 6
18n
Instrument cluster BMW X5 4.6is
signal
y Control 74
auge 76
7 Indicator and warning lamps 19 to 22
8 Reset button for trip odometer 73
9 Service Interval Display 76
10 Display for >
Trip odometer 73 >
Outside temperature display 73
dicator for Check Control 77
lector lever and program display r automatic transmission* 65
HECK button 77
dicator and warning mps 19 to 22
11 In
12 Se fo
13 C
14 In la
1 Fuel gauge 75
2 Indicator lamp for turn indicators 22
3 Speedometer
4 Indicator and warning lamps 19 to 22
5 Tachometer and Energ
6 Coolant temperature g
5 3 0 u s2
2 6
5 3 0 u s2
3 0
19n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Indicator and warning lamps
Parking brake
*
/ Brake hydraulic system
Comes on when you engage the king brake. additional information: refer to e 64.
es on although the parking brake leased: have the brake fluid level cked. Before continuing your ney, be sure to read the notes on es 132 and 144.
comes on in the Check Control the message CHECK BRAKE
INGS.
Parking brake warning lamp
*
/ Brake hydraulic system warning lamp for Canadian models.
Tire Pressure Monitor RDC
*
In addition, an acoustic signal is sounded: a flat tire has
urred. Reduce vehicle speed imme- ely and stop the vehicle. Avoid hard ke applications. As you steer the icle, use caution and avoid overcor- ing.
n
se
ot ld e
rts
par For pag
Com is re che jour pag
Also with LIN
occ diat bra veh rect
Da In
de x
additional information: refer to e 96.
For pag
Technology that monitors itself Indicator and warning lamps that are identified by are tested for proper functioning whenever the ignition key is turned. They each light up once for different periods of time.
If a fault should occur in one of these systems, the corresponding lamp does not go out after the engine is started or it lights up while the vehicle is moving. You will see how to react to this in the following section.
Red: stop immediately Battery charge current
The battery is no longer being charged. There is a malfunctio
of the alternator drive belt or in the charging circuit of the alternator. Plea contact the nearest BMW Sports Activity Vehicle center.
If the drive belt is defective, do n continue driving. The engine cou
be damaged due to overheating. If th drive belt is defective, increased steering effort is also required.<
Engine oil pressure
Stop the vehicle immediately
Check the engine oil level; top off as required. If the oil level is correct: please contact the nearest BMW Spo Activity Vehicle center.
Do not continue driving. The engine could be damaged
because of inadequate lubrication.<
20n
Indicator and warning lamps
w: check as soon as possible
Antilock Brake System ABS
ABS has been deactivated in response to system malfunction.
ntional braking performance ns available with no loss of effi- y. Please have the system cted by your BMW Sports Activity le center. ditional information: refer to
132.
ABS warning lamp for Canadian models.
Engine oil level Comes on while driving: The oil level is at the absolute
um; refill as soon as possible. Do ive more than approx. 30 miles/ until you do. ditional information: refer to
141.
Engine oil level
r
Yello
Conve remai cienc inspe Vehic For ad page
minim not dr 50 km For ad page
Comes on after the engine has been switched off: add engine
your earliest opportunity, e.g. you stop to refuel. ditional information: refer to
141.
oil at when For ad page
Red or yellow: continue to drive; drive cautiously
If the brake warning lamp comes on red together with the yellow warning lamps for ABS and DSC: Continue to drive; drive cautiously and defensively and avoid full brake applications. Have the system checked by the
nearest BMW Sports Activity Vehicle center. For additional information: refer to pages 91 and 132.
If all three warning lamps come on yellow:
Red: an important reminder Parking brake* Comes on when the parking brake is engaged.
For additional information: refer to page 64.
Parking brake* warning lamp fo Canadian models.
Please fasten safety belts
Lights up either for a few seconds or, depending on
model, until the belt is engaged. Depending on model, together with an acoustic signal* or a message* in the
Continue to drive; drive cautiously and defensively and avoid full brake appli- cations. Have the system checked by your BMW Sports Activity Vehicle center as soon as possible.
Warning lamps for Canadian models.
Check Control. For additional information on safety belts: refer to page 49.
Airbags
Please have the system inspected by your BMW Sports
Activity Vehicle center. For additional information: refer to page 55.
21n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Indicator and warning lamps
Service Engine Soon
If the indicator lamp comes on either continuously or intermit-
ly, this indicates a fault in the ssions-related electronic systems. ough the vehicle remains opera- al, you should have the systems cked by your BMW Sports Activity icle center at the earliest possible ortunity. additional information: refer to e 147.
Service Engine Soon warning lamp for Canadian models.
Check Filler Cap*
This indicator lamp comes on when the fuel filler cap is loose
issing. se the filler cap tightly: refer to e 25.
ve
s
e es
he
e
tent emi Alth tion che Veh opp For pag
or m Clo pag
Da In
de x
,
Automatic transmission* Because of a malfunction, the automatic transmission shifts
only in the emergency program. Please consult the nearest BMW Sports Activity Vehicle center. For additional information: refer to page 67.
Brake pads*
Have the brake pads checked. For additional information: refer
to page 132.
Self-leveling suspension* Self-leveling suspension is inac- tive. Please consult the nearest
BMW Sports Activity Vehicle center.
Dynamic Stability Control DSC Indicator lamp flashes:
The system is active and governs dri and braking force. The warning lamp comes on and stay on while driving: DSC has been switched off with the button. If, after repeatedly pressing th DSC button, the warning lamp still do not go off, then that means that the DSC, HDC and the vehicle's road- holding ability are defective. Please have the system checked by t nearest BMW Sports Activity Vehicle center. For additional information: refer to
For additional information: refer to page 94.
Dynamic Brake Control DBC Fault in the DBC system. Conventional braking perfor-
mance remains available with no loss of efficiency. Please have the system checked and repaired by your BMW Sports Activity Vehicle center. For additional information: refer to page 92.
Dynamic Brake Control DBC warning lamp for Canadian models.
pages 91 and 93.
Engine electronics* There is a fault in the engine's electronic control system. You
can continue to drive with reduced engine output or engine speed. Pleas have the system checked by your BMW Sports Activity Vehicle center.
Tire Pressure Monitor RDC* Check tire inflation pressures refer to pages 26, 97.
22nIndicator and warning lamps
Green: for your information Turn signal indicators Flashes when the turn signal indicators are operated. Rapid
flashing indicates a system malfunction. For additional information: refer to page 68.
Cruise control* Comes on when the cruise control is activated: available for
operation via the steering wheel with multifunction buttons. For additional information: refer to page 71.
Fog lamps
Blue: for your information High beams Lights up when the high beams are on or the headlamp flasher
is actuated. For additional information: refer to pages 68 and 100.
Lights up whenever you switch on the fog lamps.
For additional information: refer to page 100.
23n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Steering wheel with multifunction buttons*
me
ise control: calling up.
ise control: store and accelerate + ecelerate and store .
ise control: activate/interrupt/deac- te.
irculated-air mode and automatic rculated-air control AUC or steering el heating: switch on/off.
t
.
Volu
Cru
Cru or d
Cru tiva
Rec reci whe
In de
x
The buttons integrated in the steering wheel are provided so that you can operate a number of accessories quickly and without being distracted from traffic conditions. You may operate:
>selected control functions for the radio along with CD and cassette player
> the recirculated-air mode of the air conditioner* or the steering-wheel heating*
> the cruise control >selected phone functions and > the voice entry
In order to operate a system, the
Switch between phone and radio, cassette and CD.
Forward:
>Radio Press briefly: next stored station Extended pressure: station search function
>CD Press briefly: jump to next track Extended pressure: fast forward in track
>Cassette
switched on.<
Press briefly: Accept incoming call, start dialing, terminate call. Extended pressure: Activate/deactivate voice entry.
Press briefly: stop track scan or fas forward Extended pressure: fast forward
>Phone Scan personal phone book.
Reverse: functions as for fast forward
24nWarning triangle* First-aid kit* Refueling
filler door Before filling the tank, switch off the engine. If you do not, fuel t be filled into the tank and the
Fuel
canno
5 3 0 d
e2 4 3
e Engine Soon lamp may come
en the fuel filler door, press on the dge.
event of an electrical malfunction, an also open the fuel filler door ally:
en the cover on the right in the go area: lift the handle on the er l the knob with the fuel pump bol.
Servic on.<
To op front e
In the you c manu
1. Op car cov
2. Pul sym
1. Open the cover on the left in the cargo area: lift the handle on the cover
2. Pull the tab of the retaining strap,
5 3 0 u s0
0 5
The first-aid kit is located under the front passenger's seat.
To open: pull the handle and fold the cover down.
5 3 0 d
e2 4 2
refer to arrow, and remove the hazard warning triangle from the support bracket
3. To install: slide the hazard warning triangle into the support bracket and press on the retaining strap.
Always observe all legal regula- tions requiring a warning triangle
to be carried in the vehicle.<
To close: fold the cover up.
Some of the articles in the first-aid kit may be used within a limited
time only. For this reason, check the expiration dates of each of the items regularly, and replace any whose expiration dates have passed. You can acquire replacements in any drugstore or pharmacy. Always observe all legal regulations requiring a first-aid kit to be carried in the vehicle.<
25n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Refueling
ong as the filler nozzle is used prop- , the fuel tank is full whenever the zle shuts off the first time.
Close the filler cap carefully after refueling until a click is heard.
ile closing, be sure not to squeeze strap which is fastened to the cap. ose or missing cap will activate the sage CHECK FILLER CAP in the ck Control* or the Check Filler Cap p*.<
k capacity: rox. 24.6 gal./approx. 93 liters, a reserve capacity of
ylinder engine: approx. 2.0 gal./
As l erly noz
Wh the A lo mes Che lam
Tan app with 6-c
Re pa
ir s
Da ta
In de
x
rox. 8 liters ylinder engine: approx. 2.5 gal./ rox. 10 liters.
Do not drive until the tank is completely empty, as otherwise
ine functions are not ensured and age can occur.<
e
-
or
app 8-c app
eng dam
When handling fuels, comply with all of the applicable safety precau-
tions and regulations pertaining to fuels. Never carry spare fuel containers in your vehicle. Whether empty or full, these containers can leak, cause an explosion, or lead to fire in the event of a collision.<
Simple and environmentally friendly
Open the filler cap carefully to prevent fuel from spraying out.
5 3 0 u s0
0 8
Fuel spray may cause injury. Do not top off. Topping off may caus fuel spillage.<
Keep the filler cap in the bracket attached to the fuel filler door.
When refueling, insert the filler nozzle completely into the filler pipe. Pulling the nozzle out of the pipe during refu eling
> results in premature pump shutoff >and will reduce the effect of the vap
recovery system on the pump.
26nFuel specifications Tire inflation pressures
Check tire inflation pressures regularly at least every two s and before beginning a longer correct tire pressure can other-
ead to poor handling, tire damage ccidents. k the tire inflation pressure of the tire. Inflate the spare tire to ghest inflation pressure of any tire ur vehicle.<
ply with tire approval ifications flation pressures in the table
to tire sizes and tires from BMW- ved manufacturers. Your
week trip. In wise l and a Chec spare the hi on yo
Com spec The in apply appro
Sports Activity Vehicle center is ar with these pressures. A nt inflation pressure may be ed for tire makes not approved by .
vehicle is equipped with tires that ly meet US standards, but also ean standards. We recommend clusive use of BMW-approved
.
BMW famili differe requir BMW
Your not on Europ the ex tires.
The engine uses lead-free gasoline only.
Required fuel:
>Premium Unleaded Gasoline, min. 91 AKI.
AKI = Anti Knock Index
Do not use leaded fuels. The use of leaded fuels will cause perma-
nent damage to the system's oxygen sensor and the catalytic converter.<
Check tire pressures All pressure specifications are indicated in psi/kilopascal for tires at ambient temperature, refer also to the table on
5 3 0 d
e2 2 5
the next page.
Vehicles with Tire Pressure Monitor RDC: After correcting the inflation pressures, reactivate the system, refer to page 97
27n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire inflation pressures
70
Re pa
ir s
Da ta
In de
x
BMW Tires
All pressure specifications in the table are indicated in psi/ kilopascal with cold tires, cold = ambient temperature
X5 All sizes 32/220 32/220 32/220 39/2
28n
Controls
29n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Index
Technical data
Owner service procedures
In
30nKeys Central locking system
oncept entral locking system is ready for tion as soon as you close the front . The system engages or releases cks on the
rs ate/tailgate l filler door.
entral locking system can be ted
outside via the remote control ell as via the driver's door lock inside via the button for the
tral locking system.
system is locked from inside, the
The c The c opera doors the lo
>doo > liftg > fue
The c opera
> from as w
> from cen
If the
the system is actuated from e of the vehicle, the anti-theft is actuated simultaneously. This
nts the doors from being unlocked fety lock buttons or door handles. larm system is also armed or ed.
event of an accident, the central g system unlocks automatically, ly those doors which were not
d separately with the safety lock s, refer to page 35. In addition, zard warning flashers and interior come on.
fuel fi to pag
When outsid system preve via sa The a disarm
In the lockin but on locke button the ha lamps
The key set 1 The master keys with remote control
determine the functions of the Key Memory, refer to page 61.
4 6 3 d
e0 2 3
2 Spare master key for storage in a safe place, such as in your wallet. This key is not intended for contin- uous use
3 Door and ignition key The lock for the glove compartment cannot be operated with this key. This is recommended for valet parking, for instance.
You can mark individual keys for subsequent identification by applying the colored decals that you received when accepting delivery of your vehicle
There is an extended-life battery in every master key which is
charged automatically in the ignition lock as you drive. For this reason, if you have a master key that is otherwise not used, use that key approx. once every year while driving for an extended period. This will charge the battery, refer also to page 31.<
31n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Opening and closing via the remote control
nlock and convenience opening
ock and secure, switching on inte- or lamps, switching off tilt alarm ensor and interior motion sensor
pen the liftgate, panic mode
e , at
ol, y in nt ol, ey
,
1 U
2 L ri s
3 O
3 9 0 d
e7 9 3
In de
x
The concept The remote control makes opening and locking the doors of your vehicle very convenient. Furthermore it provides three additional functions that can only be executed via the remote control:
>Switch on the interior lamps, refer to page 32. With this function, you can also search for your vehicle when parked in an underground garage, for instance
>Open the liftgate, refer to page 32. The liftgate will open slightly, regard- less of whether it was previously locked or unlocked
Since passengers or animals remaining in the vehicle might b
able to lock the doors from the inside take the vehicle's keys with you so th the vehicle can be opened again from the outside at any time.<
If it is no longer possible to lock the vehicle via the remote contr
the battery is discharged. Use this ke while driving for an extended period order to charge the battery. To preve unauthorized use of the remote contr surrender only the door and ignition k or the spare key when leaving the vehicle for valet parking, for example refer to page 30.
>Panic mode, refer to page 32. In case of danger, you can trigger an alarm.
Whenever you unlock or lock the vehicle, you simultaneously deactivate/ activate the anti-theft system, disarm/ arm the alarm system and switch the interior lamps on/off.
You can have an acknowledgment signal set to confirm that the
vehicle is correctly locked.<
In the event of a system malfunction, please contact your BMW Sports Activity Vehicle center. You can also obtain replacement keys there.<
32nOpening and closing via the remote control
en the liftgate
button.
ggage compartment lid/liftgate en slightly, regardless of whether previously locked or unlocked.
Before and after a trip, be sure that the tailgate/liftgate was not d unintentionally.<
mode
essing and holding the button for than two seconds, you can trigger rm via the alarm system if there is pending danger (the alarm system be armed).
itch off the alarm
button.
To op
Press
The lu will op it was
opene
Panic
By pr more an ala an im must
To sw
Press
To unlock
Press button.
Press the button once to unlock the driver's door and the fuel filler door only; press a second time to unlock all remaining doors as well as the tailgate/ liftgate.
Convenience opening mode
Press and hold button. The power windows and sliding/tilt sunroof are opened.
To lock and secure
Press button.
To switch on the interior lamps
After locking the vehicle, press button again.
To switch off the tilt alarm sensor and interior motion sensor
Press button a second time immedi-
33n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Opening and closing via the remote control
y
he e
r- ce n.
to
-
System interference The remote control system may be affected by other units or equipment operating in the immediate vicinity of your vehicle.
If this should occur, you can unlock and lock the vehicle via the door lock with a master key.
For US owners only The transmitter and receiver units comply with part 15 of the FCC Federal Communication Commission regulations. Operation is governed b the following:
FCC ID: LX8EWS LX8FZVS LX8FZVE
Compliance statement: This device complies with part 15 of t FCC Rules. Operation is subject to th following two conditions:
>This device may not cause harmful interference, and
> this device must accept any interfe
Any unauthorized modifications these devices could void the
user's authority to operate this equip ment.<
34nOpening and closing via the door lock
,
One turn of the key in the driver's door lock unlocks the driver's door only. Turning the key a second time unlocks all of the remaining doors, the liftgate/
5 3 0 d
e2 4 4
Convenience operation You can also operate the windows and sliding/tilt sunroof via the door lock.
>To open: with the door closed, turn the key to the Unlock position and hold it
>To close: with the door closed, turn the key to the Lock position and hold it.
Watch during the closing process to be sure that no one is inadvert-
ently injured. Releasing the key stops the operation.<
Manual operation
You can have an acknowledgment signal set to confirm that the
vehicle is correctly locked.<
In the event of an electrical malfunction turn the key to the extreme left or right to unlock/lock the door.
35n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Opening and closing from the inside
engage the locks se the central locking button to lock ll of the doors simultaneously, r ress down the individual safety lock uttons. The fuel filler door remains nlocked. As an added design ature to prevent the driver from eing inadvertently locked out of the ehicle, the driver's safety lock utton will not engage as long as the oor is open.
When the vehicle is moving, do not lock the doors with the safety
buttons. Doors locked in this ner would not unlock automatically e event of an accident. e passengers or animals remaining e vehicle might be able to lock the rs from the inside, take the vehicle's s with you so that the vehicle can be ned again from the outside at any .<
in
ith
le
or r,
To >U
a o
>p b u fe b v b d
lock man in th Sinc in th doo key ope time
In de
x
You can operate the central locking system with this button when the driver's door is closed. The doors and liftgate are unlocked or locked only. However, the anti-theft system is not
5 3 0 d
e2 2 0
If only the driver's door was unlocked from the outside and
you press the button >all other doors, the tailgate/liftgate
and the fuel filler door will be unlocked when the driver's door is opened
> the driver's door will be locked aga when it is closed.<
To unlock and open the doors >Either unlock the doors together w
the button for the central locking system and then pull the door hand above the armrest or
>pull the release handle for each do
The central locking system can be locked automatically as soon as
you begin to drive if you desire. You may also have this function programmed into individual keys.<
twice: the first pull unlocks the doo and the second one opens it.
36nLiftgate
al release event of an electrical malfunction, an release the liftgate manually:
move the plastic plug from inside cargo area and pull toward the rior, refer to arrow. The liftgate
l be released install the plug.
Manu In the you c
1. Re the inte wil
2. Re
5 3 0 d
e3 1 6
To open from the outside Press the button, refer to arrow: The liftgate opens slightly.
5 3 0 d
e2 4 5
Opening from inside the vehicle Press this button to open the liftgate when the vehicle is stationary.
5 3 0 d
e2 2 1
The cargo area is illuminated whenever the liftgate is opened, refer also to page 101.
When the liftgate is opened, the clearance from the ground to the
upper edge is more than 6.6 ft/2 m. Please keep this in mind when opening the liftgate (in a garage, for example).<
If pointed or sharp-edged objects could strike the rear window while
driving, be sure to provide protection around all edges. If you do not do this, the heating conductors of the rear window could be damaged.<
For information on the cargo area cover and on other details in the cargo area, refer to Cargo area, beginning on page 120.
37n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Liftgate Tailgate
open ss the button: can fold the tailgate down.
d. e- it e
/
To Pre You
5 3 0 d
e2 4 6
Re pa
ir s
Da ta
In de
x
When opened, the tailgate can accept loads of up to 440 lbs/
kg. When the vehicle is parked, you utilize the tailgate as a seat or as a ing platform for luggage or recre- n gear, for example.<
200 may load atio
To close You can pull the liftgate down by placing both hands in the handle recesses, refer to arrows.
5 3 0 u s0
1 7
Operate the vehicle only when both gates are completely close
Otherwise, exhaust fumes could pen trate the interior of the vehicle. Should be absolutely necessary to operate th vehicle with an open gate: >Close all windows. Shut the sliding
tilt sunroof > Increase the air supply for the air
conditioner or automatic climate control to a high level, refer to page 103 or 107.<
To avoid injuries, be sure that the travel path of the liftgate is clear
when it is closed, as with all closing procedures.<
38nTailgate
age straps he retaining straps on the cargo loor to secure smaller items of ge.
Lugg Use t area f lugga
3 9 4 d
e3 0 2
ment is reduced when objects are d on the straps.
shing eyes located at the corners cargo area provide you with a nient means of attaching luggage or flexible straps for securing ge.
also to Stowing cargo on 126.
Move place
The la of the conve nets* lugga
Refer page
Manual release In the event of an electrical malfunction, you can release the tailgate manually:
5 3 0 d
e3 1 7
2. Using the same tool, press the latch in the direction of the arrow; the tailgate is released
3. Reinstall the trim panel. 5 3 0 d
e2 4 1
1. Unfasten the trim panel clip with the vehicle key or with a screwdriver, refer to arrow 1, and remove it toward the top, refer to arrow 2
39n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Alarm system
icator lamp displays he indicator lamp below the interior arview mirror flashes continuously: e system is armed
ed e
-
e he
Ind >T
re th
5 3 0 u s0
1 8
Re pa
ir s
Da ta
In de
x
he indicator lamp flashes during rming: the door(s), the hood or lift- ate are not completely closed. Even you do not close the alerted area, e system begins to monitor the maining areas, and the indicator mp flashes continuously after 0 seconds. However, the interior otion sensor is not activated the indicator lamp goes out when e system is disarmed: no manipula-
on or attempted intrusions have een detected in the period since the ystem was armed
, it >T a g if th re la 1 m
> If th ti b s
The concept The vehicle alarm system responds:
>When a door, the hood, or the liftgate is opened
>To movement inside the vehicle interior motion sensor
>To variations in the vehicle tilt angle such as occur during attempts to steal the wheels or tow the vehicle
>To interruption of battery voltage.
The system responds to unauthorized vehicle entry and attempted theft by simultaneously activating the following:
>Sounding an acoustical alarm for 30 seconds
>The hazard warning flashers are acti-
To arm and disarm the alarm system When the vehicle is locked or unlock with the key or the remote control, th alarm system is also simultaneously armed or disarmed.
You can have different acknowl edgment signals set to confirm
system arming and disarming.<
You can still open the liftgate after th system has been armed by pressing t button of the remote control, refer to
vated for approx. five minutes >The high beams flash on and off in
the same rhythm.
page 32. When you close the liftgate is secured again.
40nAlarm system Electric power windows
and close windows ignition key position 1:
ss the switch up to the pressure
-
Open From
>Pre
5 3 0 u s0
2 0
nt: window continues to move as as you continue to hold the
tch ss the switch beyond the pressure nt: window moves downward auto-
tically. Touch the switch again to p the opening movement.
an close the windows in the same er by pulling the switch.
poi The long swi
>Pre poi The ma sto
You c mann
> If the indicator lamp flashes for 10 seconds when the system is disarmed: an attempted entry has been detected in the period since the system was armed.
Following triggering of an alarm, the indicator lamp will flash continuously.
Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. To prevent an unintentional alarm from being triggered, in garages with elevator ramps, for instance, or when the vehicle is transported by trailer or train:
Interior motion sensor In order for the interior motion sensor to function properly, the windows and sliding/tilt sunroof must be completely closed.
However, be sure to switch off the inte rior motion sensor refer to the previous column when you
> leave children or animals in the vehicle
> intend to leave the windows or sliding/tilt sunroof open.
Lock the vehicle twice, i. e. arm the system. Press button of the remote control twice in succession or actuate the locks twice with the key. The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are deactivated as long as the system is armed.
41n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Electric power windows
ety switch h the safety switch, you can prevent rear windows from being opened or ed via the switches in the rear
g
rip
y re
ed e
y. an
Saf Wit the clos
5 3 0 u s2
0 9
Re pa
ir s
Da ta
In de
x
senger area, by children, for mple. You can also prevent adjust- ts of the power rear-seat backrests the rear passenger area, refer to
e 48.
Press the safety switch whenever children are riding in the rear of
vehicle. Careless use of the power dows can lead to injury.<
r e
r
pas exa men from pag
the win
After the ignition has been switched off:
>You can still operate the windows as long as neither of the front doors has been opened. To open the windows, press the switch beyond the pressure point.
Remove the key from the ignition lock and close the doors when
you leave the vehicle so that children cannot operate the power windows and possibly injure themselves.<
For the convenience mode via the remote control or the door lock, refer to pages 32 and 34.
Despite this safety feature, be extremely careful that the closin
path of the window is not obstructed whenever it is closed. Otherwise, an object might not touch the contact st in some situations, with very thin objects, for instance. You can override this safety feature b pulling the switch beyond the pressu point and holding it. Because the power windows are seal at high pressure to prevent wind nois when closed, a powerful motor is required for efficient closing. When closing the windows, always ensure that they are not obstructed in any wa Unsupervised use of these systems c
Safety feature A contact strip is integrated into the inner side of each of the upper window frame sections. If pressure is exerted against this contact strip while a window is being raised, the system will respond by stopping the window and then retracting it a small distance.
result in serious personal injury. Remove the ignition key to deactivate the electric power windows wheneve you leave the vehicle. Never leave th keys in the vehicle with unsupervised children. Never place anything that could obstruct the driver's vision on o next to the windows.<
42nSliding/tilt sunroof with glass moonroof*
the ignition has been switched off, an still operate the sliding/tilt of as long as neither of the front has been opened.
e convenience mode via the e control or the door lock, refer to 32 and 34.
matic* opening and closing the switch briefly past the pres- oint and then release it.
automatic operations are:
h the sunroof open, press the tch briefly toward Lift: the sunroof omatically extends to its fully ed position.
ing the switch again briefly stops otion.
h the sunroof raised, hold the tch toward Open until the roof has ched the desired position.
After you c sunro doors
For th remot pages
Auto Press sure p
Other
>Wit swi aut rais
Press the m
>Wit swi rea
To prevent injuries, exercise care when closing the sliding/tilt
sunroof and keep it in your field of vision until it is shut. Before leaving the vehicle, switch off the electric sunroof mechanism by removing the ignition key. Do not leave children unattended in the vehicle with access to vehicle keys. Use of the key can result in starting of the engine and operation of vehicle systems such as the power sunroof, etc. Unsupervised use of these systems can result in serious personal injury.<
Lifting Opening Closing With the ignition key in position 1 or higher, press the switch or slide it in the desired direction until you feel resis-
5 3 0 d
e2 4 7
tance.
The headliner slides back somewhat when you raise the sunroof. When the sunroof is opened the headliner retracts with it. It remains open, and it is possible to slide it back and forth as long as the sunroof is not completely open.
The headliner insert cannot be closed with the sliding/tilt sunroof
in its raised position.<
43n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Sliding/tilt sunroof with glass moonroof*
nual operation e event of an electrical malfunction,
can operate the sliding/tilt sunroof ually:
pen the glasses compartment, refer page 117 sert the Allen wrench from the
ehicle tool kit, refer to page 150, in e opening provided and turn the
liding/tilt sunroof in the desired irection.
r
x.
Ma In th you man
1. O to
2. In v th s d
5 3 0 u s1
2 4
In de
x
Safety feature If the sliding/tilt sunroof encounters resistance when it is
>closing from the raised position >closing at a point roughly past the
middle of its travel
the closing cycle is interrupted and the sliding/tilt sunroof will open again slightly.
Despite this safety feature, be extremely careful that the closing
path of the sunroof is not obstructed whenever it is closed. Otherwise, trig- gering the closing-force limitation may not be ensured in some situations, with
Power loss When the battery is disconnected, fo instance, the sunroof may only lift. To reinitialize the mechanism:
5 3 0 d
e2 4 8
very thin objects, for instance. You can disable this safety feature by pressing the switch beyond the pressure point and holding it.<
1. Raise the sliding/tilt sunroof fully 2. Press and hold the switch for appro
twenty seconds.
44n
rve the following before ting
Never try to adjust your seat while operating the vehicle. The seat respond with unexpected move- and the ensuing loss of vehicle l could lead to an accident. Never ith the backrest reclined to an e horizontal angle especially
tant for front passengers to ber.
do so there is a risk that you will under the safety belt in an acci- thus reducing the protection ed by the safety belt.<
Safe seating position Seats
The condition for relaxed, fatigue-free driving is a seating position adjusted to your needs. Together with the safety belts and the airbags, the seating posi- tion is very important for the passive safety of the occupants in the case of an accident. Therefore, observe the following instructions, as otherwise the protective function of the safety systems may be impaired.
For additional information on trans- porting children safely, refer to page 58.
Sitting safely with airbags Maintain a distance to the airbags.
Sitting safely with safety belts Never allow more than one person to wear a single safety belt. Never
allow infants or small children to ride in a passenger's lap. Avoid twisting the belt while routing it firmly across the pelvis and shoulder, wear it as snugly against your body as possible. Do not allow the belt to rest against hard or fragile objects in your pockets. Never route the belt across your neck, do not run it across sharp edges and ensure that the belt does not become caught or jammed. Avoid wearing bulky clothing and pull on the lap belt periodi- cally to retension it over your shoulders.
adjustment chanical seat adjustment, refer to e 45 er seat adjustment, refer to e 46 d restraints, refer to page 47 er rear-seat backrest adjustment, r to page 48
Always hold the steering wheel by the rim with the hands at the 9 and 3-o'clock positions to keep any chance of injury to hands or arms to an abso- lute minimum, should the airbag be deployed. No one and nothing is to come between the airbags and the seat occupant. Do not use the cover of the front airbag on the front passenger side as a storage area for objects, or as a rest for feet or legs.<
For the location of the airbags and additional information, refer to page 55.
In the event of a frontal impact, a loose lap belt could slide over your hips, leading to abdominal injury. In addition, the safety belt's restraint effectiveness is reduced if the belt is worn loosely. Expectant mothers should always wear their safety belts, taking care to position the lap belt against the lower hips, where it will not exert pressure against the abdominal area.<
For instructions on operating the safety belts, refer to page 49.
Obse adjus
could ment, contro ride w extrem impor remem If you slide dent, provid
Seat >Me
pag >Pow
pag >Hea >Pow
refe
45n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Mechanical seat
usting the BMW sports seat* can adjust the thigh support addi- ally:
the lever and adjust the position of thigh support for your personal fort.
r s
Adj You tion
Pull the com
5 3 0 d
e2 5 3
Da ta
In de
x
Seat adjustment 1 Backward/forward adjustment
Pull the lever and slide the seat to the desired position.
5 3 0 u s2
1 1
3 Backrest angle Pull the lever and apply weight to o remove weight from the backrest a required.
5 3 0 u s2
1 2
After you release the lever, move the seat forward or backward slightly so that it engages fully
2 Cushion height Pull the lever and apply weight to or remove weight from the seat as required
Comply with the adjustment instructions on page 44. Failure
to do so could result in diminished personal safety.<
46nPower seat*
ss the front or rear of the switch: ease or decrease curvature ss the upper or lower end of the tch: ease the upper or lower curva- .
l
>Pre Incr
>Pre swi Incr ture
Seat adjustment 1 Tilt angle driver's seat only
2 Backward/forward adjustment
5 3 0 u s0
2 4
Adjusting the BMW comfort seat* This seat allows you to make additiona adjustments for
5 3 0 d
e2 5 1
3 Cushion height
4 Backrest angle
Adjust the head restraint manually, refer to page 47.
Comply with the adjustment instructions on page 44. Failure to
do so could result in diminished personal safety.<
1 Lumbar support
2 Shoulder support
3 Head restraint height
Lumbar support:
You can adjust the backrest's contour for additional support in the curvature of your spine's lumbar region.
The upper hips and spinal column receive supplementary support to help you maintain a relaxed, upright seating position.
47n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Power seat* Head restraints
ustments djust the angle of the front head raints, tilt the head restraint to the ired angle.
djust the height of the front or rear d restraints, pull the head restraint r push it down. er height adjustment, refer to e 46.
Adjust the head restraint so that
to
ell
/ t
t e
Adj To a rest des
To a hea up o Pow pag
5 3 0 d
e2 5 0
Da ta
In de
x
its center is approximately level your ears, otherwise the risk of al injury in the event of an accident
increase.<
with spin will
Shoulder support:
Move the switch in the direction of the arrow to adjust the tilt angle of the shoulder support.
5 3 0 d
e2 5 2
Front passenger's seat adjusted for relaxed traveling:
1. Adjust the upper backrest section its extreme rear position
2. Tilt the backrest down to a slightly more horizontal angle
3. Bring the upper backrest section forward until your shoulders are w supported.
Make corrections in the forward backward adjustment of the sea
to ensure that the safety belt still fits firmly against your body. If you do no do this, the protection provided by th safety belt may be reduced.<
You can use the adjustable upper back- rest for supplementary support in the shoulder region. This provides a relaxed seating position and helps relieve stress on the shoulder muscles.
To obtain the optimal shoulder support position, we recommend:
Driver and front passenger:
1. Adjust the upper backrest section to its extreme rear position
2. Adjust for the optimal sitting position as described on page 44
3. Bring the upper backrest section further forward until your shoulders are well supported.
Head restraint height:
Move the switch in the desired direc- tion.
48nHead restraints Power rear-seat backrest adjustment*
the cargo area: the switches are d on both sides of the cargo area.
From locate
5 3 0 d
e2 2 4
Removal front 1. Pull the head restraint upward to the
stop 2. Press the button, refer to arrow, and
5 3 0 d
e3 2 3
You can make separate adjustments of the backrest tilt angle on the right and left sides. You can select a comfortable seating
5 3 0 u s1
4 3
remove the head restraint.
Installation front 1. Press the button, refer to arrow, and
insert the head restraint into the guides
2. Adjust the head restraint for your personal comfort.
Removal and installation rear To remove the head restraint, pull it outward with a firm movement. To install it, press it down firmly.
position and also increase the capacity of the cargo area by moving the back- rests into their most upright position.
From the rear seats: press the corre- sponding switch.
You can prevent adjustments of the power rear-seat backrest from
the rear passenger area with the safety switch for the power windows, refer to page 41.<
49n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Safety belts
ety belt height adjustment can adjust the safety belts to fit r own physical dimensions by using safety belt height adjustment:
he
er k-
Saf You you the
5 3 0 d
e2 5 9
Re pa
ir s
Da ta
In de
x
e the button up or down as uired.
observe the instructions on sting the seats on page 44.
If the safety belt system has been subjected to the stresses involved
n accident or otherwise damaged: e the entire safety belt system laced by your BMW Sports Activity icle center. In addition, have your W Sports Activity Vehicle center ect the safety belt anchors. Other-
e, the safety function can no longer nsured.c
Slid req
Also adju
in a Hav rep Veh BM insp wis be e
Drive with your safety belt on Even though there is an airbag, wear a safety belt every time you get in the vehicle, because airbags enhance
5 3 0 u s0
3 4
In the rear, the belt buckle with the word CENTER is intended
exclusively for passengers sitting in t middle. If it is not possible to extract the cent belt, this indicates that the larger bac rest is not securely locked, refer to page 120.<
safety by providing added protection.
To lock Make sure you hear the lock engage in the belt buckle.
Please fasten safety belts warning lamp Lights up either for a few
seconds or until the belt is engaged.
To unlock 1. Press the red button in the buckle 2. Hold the belt 3. Guide the belt back into its reel.
50nSeat, mirror and steering wheel memory*
ll up a stored setting Do not call up a position from the memory while the vehicle is g. There is a risk of accident from ected movement of the seat or ng wheel.<
nience function:
en the driver's door after ocking the vehicle or place the ition key in position 1 efly press memory button 1, 2 , as desired.
vement stops immediately when of the seat-adjustment or
mory buttons is activated during adjustment process.
ity function:
h the driver's door closed and the ition key either removed or in ition 0 or 2 intain pressure on the desired mory button 1, 2 or 3 until the ustment process is completed.
If you press the MEMORY button accidentally: press the button a d time the indicator lamp goes
2
-
.
To ca
movin unexp steeri
Conve
1. Op unl ign
2. Bri or 3 Mo one me the
Secur
1. Wit ign pos
2. Ma me adj
secon out.<
You can store and call up three different seat, exterior mirror and steering wheel positions. The illustration shows the buttons on the seat for making these
5 3 0 u s0
3 2
To store 1. Turn the ignition key to position 1 or 2. Adjust the desired positions for the
seat, exterior mirror and steering wheel
3. Press the MEMORY button: the indi cator lamp in the button comes on
4. Press memory button 1, 2 or 3, as desired: the indicator lamp goes out
position adjustments.
The adjustment of the lumbar support is not stored in the
memory.<
51n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
at a
Seat, mirror and steering wheel memory* Seat heating*
nt seat cushion and backrest can be ted when the ignition key is in posi- 2.
can call up different heating modes epeatedly pressing the button.
can also switch the higher heating es off directly:
ss the button and hold it slightly er.
ilt
, n- e
-
.
Fro The hea tion
You by r
You mod Pre long
5 3 0 d
e2 3 3
D
de x
Your BMW Sports Activity Vehicle center can adjust your vehicle's
systems in such a manner that your personalized settings are automatically called up for the seat, mirror and steering wheel positions when you unlock the vehicle with your personal remote control key.<
If you make use of this adjustment, be sure that the footwell behind
the driver's seat is unobstructed before unlocking the vehicle. If you fail to do so, persons or objects could be injured or damaged if the seat should move backward.<
Passenger side exterior mirror t function Automatic curb monitor
1. Select the driver's mirror via the
5 3 0 u s2
1 4
switch 2. When the gearshift lever or the
selector lever is placed in Reverse the passenger-side mirror tilts dow ward to help the driver monitor the area directly adjacent to the vehicl during parking curbs, etc.
You can deactivate this automatic fea ture by setting the mirror selector switch to the passenger side position
52nSeat heating* Steering wheel
matic steering wheel tment conjunction with seat, mirror and
ng wheel memory
er to make it easier to get into and the vehicle, the steering wheel atically moves into the top posi-
nd returns to the driving or ry position.
utomatic feature is controlled by sition of the ignition key and by iver's door.
Auto adjus only in steeri
In ord out of autom tion a memo
This a the po the dr
l
Rear The function is the same as for front seat heating. You can select between two heating modes.
5 3 0 d
e2 3 4
Adjustment The steering wheel can be moved in any of four directions. Adjust the steering wheel by moving the control
5 3 0 d
e2 5 5
lever in the desired direction.
Do not adjust the steering wheel while the vehicle is moving. If you
do so, there is a risk of accident from unexpected movement.<
To store the steering wheel setting, refer to Seat, mirror and steering whee memory on page 50.
53n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Steering wheel heating* Mirrors
Before going through a car wash, manually, or with button 3 fold the
rior mirrors inward, otherwise they ld be damaged, depending on the th of the car wash system.<
usting manually can also adjust the mirrors manu- : ss on the outer edges of their es.
tore the mirror settings, refer to t, mirror and steering wheel ory on page 50.
nvex mirror
exte cou wid
Adj You ally Pre lens
To s Sea mem
Co
Re pa
ir s
Da ta
In de
x
The passenger-side mirror features a convex lens. When esti-
ing the distance between yourself other traffic, bear in mind that the cts reflected in the mirror are closer they appear. This means that esti- ions of the distance to following fic should not be regarded as cise.<
f-defrosting mirrors h mirrors are defrosted automati- y when the ignition key is in ition 2.
,
a
mat and obje than mat traf pre
Sel Bot call pos
Steering wheel heating functions in ignition key position 2.
Press the button to activate or deacti- vate this system.
5 3 0 d
e2 3 5
Adjusting exterior mirrors 1 Mirror switch for 4-way adjustment
2 Left/right selector switch
3 Button for folding mirror in and out 5 3 0 u s2
1 3
The indicator lamp within the button lights up when the steering wheel heating is in operation.
If you have a steering wheel with multi- function buttons without steering wheel heating, the button for the recirculated- air mode is in this location, refer to page 23.
By pressing button 3 repeatedly, you can fold the mirror in and out. This is for example, advantageous in car washes, narrow streets or for bringing mirror folded forward into the proper position again.
Folding in is possible up to a speed of approx. 6 mph/
10 km/h.<
54nMirrors
ouble-free operation, keep the cells clean and do not cover the etween the interior rearview and the windshield. Do not any kind of stickers on the wind- in front of the mirror, either.
For tr photo area b mirror attach shield
.
Interior rearview mirror To reduce glare from vehicles behind you when you are driving at night, tilt the mirror by turning the button.
5 3 0 u s2
1 8
Interior and exterior rearview mirrors with automatic dimmer* These mirrors automatically dim through an infinitely-variable range.
5 3 0 u s0
3 1
They automatically revert to their undimmed mode whenever the trans- mission is placed in reverse gear or selector lever in Reverse.
There are two photocells located in the interior rearview mirror for this purpose One photocell is in the mirror glass, refer to arrow, while the other is offset somewhat on the back of the mirror.
55n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Airbags
Do not apply adhesive materials to the cover panels of the airbags,
er them or modify them in any other . Do not attempt to remove the ag restraint system from the icle. In the event of a malfunction, ctivation, or triggered actuation as sponse to an accident of the ag restraint system, consult your W Sports Activity Vehicle center for ing, repairs or service operations. not modify or tamper with either the ng or the individual components in airbag system. These include the ded steering wheel hub, the instru- t panel, the side trim panels of the t or rear doors and the roof pillars or
a
or
g
in e
cov way airb veh dea a re airb BM test Do wiri the pad men fron
Re pa
ir s
Da ta
In de
x
sides of the headliner. Do not ove or dismantle the steering wheel rself. To ensure compliance with ial safety regulations, entrust osal of airbag generators to a
W Sports Activity Vehicle center. rofessional attempts to service the
tem could lead to failure in an emer- cy or undesired airbag activation, er of which could result in personal ry. Do not touch the individual ponents directly after the system
been triggered, as otherwise there danger of burns.<
the rem you offic disp BM Unp sys gen eith inju com has is a
1 Front airbag for driver and front passenger
2 Side Impact Head Protection System for front and rear
5 3 0 u s0
3 5
The side airbags in the rear passenger area* of your vehicle
may already have been deactivated either at the time of manufacture or by BMW Sports Activity Vehicle center. You may have them activated if you desire to do so. Please contact your BMW Sports Activity Vehicle center f additional information.<
For information on the correct seatin position, refer to page 44.
The airbags will not be triggered the event of a minor accident, a
vehicle roll-over, or collisions from th rear.<
3 Side airbags for front and rear*
Protective effect The front airbags supplement the safety belts by helping to provide additional protection for the front-seat occupants in the event of a severe frontal impact in which the protection afforded by the safety belts alone may no longer be suf- cient. The Side Impact Head Protection System and the side airbags help pro- vide protection in the event of a side impact. Each of the side airbags is designed to help support the upper body.
56nAirbags
the right way a child should sit in d-restraint device when rear side s, refer to arrow, are provided.
-
t
This is a chil airbag
5 3 0 u s0
2 6
At all times, occupants should sit upright and be properly restrained
infants and small children in appro- priate child-restraint systems; larger children and adults using the safety belts. Never let an occupant's head rest near or on a side airbag because the inflating airbag could cause a serious or fatal injury. Please note that the word Airbag imprinted on the door trim panel indi- cates the airbag's location. Accident research shows that the safest place for children in an auto- mobile is in the rear seat. However, a child sitting in the rear seat and not
The rear seat side airbags may already have been deactivated, either at the time of manufacture or by a BMW Sports Activity Vehicle center. Labels in the rear door opening should indicate the status of your rear seat side airbags. If you are uncertain of their status, or wish to have the airbags acti vated or deactivated, please contact your BMW Sports Activity Vehicle center.<
Even when all these guidelines are observed, there is still a small residual risk of injuries to the face, hands and arms occurring from airbag deploymen
properly restrained may place his or her head on or near the airbag, if so equipped. For example, a child even though belted may fall asleep with his or her head against the side airbag. It may be difficult for a driver to ensure that chil- dren in the rear seat will remain prop- erly positioned at all times and do not place their heads on or near the side airbag. Therefore, we recommend that the rear side airbags, if provided, be deactivated if you plan to transport children in the rear seat.
in isolated instances. The ignition and inflation noise may provoke a mild temporary hearing loss in extremely sensitive individuals.
Airbag warning information is also pro- vided on both sun visors.
57n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Airbags
u- -
y
y up
Re pa
ir s
Da ta
In de
x
ly. ir- el
This is the right way a larger child should sit wearing the safety belt when rear side airbags, refer to arrow, are provided.
5 3 0 u s0
9 9
Indicator lamp The indicator lamp in the instr ment cluster shows the opera tional status of the airbag
system from ignition key position 1 and up.
System operational:
>The indicator lamp comes on briefl then goes out.
System malfunction:
>The indicator lamp fails to come on >The indicator lamp comes on briefl
before going out and then lighting again.
If there is a system malfunction, have
58nTransporting children safely
seating position is fitted with a restraint.
seating positions: e head restraint and pass the strap between the head restraint e seat back. It is recommended
Each head
Outer Lift th tether and th
5 3 0 au
0 0 3
to readjust the head restraint into the t possible position.
lowes
Commercially-available child-restraint systems are designed to be secured with a lap belt or with the lap belt portion of a combination lap/shoulder belt. Improperly or inadequately installed restraint systems can increase the risk of injury to children. Always read and follow the instructions that come with the system.
Child-restraint system with tether strap If you use a child-restraint system with a tether strap, three additional tether
5 3 0 u s0
3 7
anchorage points have been provided refer to the arrows in the illustration. Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corre- sponding anchorage point to secure the child-restraint system, as shown in the illustration below.
59n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Transporting children safely
nger children should be secured in ppropriate forward-facing child- raint system that has first been perly secured with a safety belt. er install a rearward-facing child- raint system in the front passenger t. strongly urge you to carefully read comply with the instructions for allation and use provided by the d restraint's manufacturer when- r you use such a device. sure that all occupants, of all ages, ain properly and securely restrained ll times.<
ear seating positions in your icle meet the recommendations of J1819, an industry-recommended
ctice for securing child-restraint sys- s in motor vehicles.
r
ag st t ts
be , e
.
to
ty
You an a rest pro Nev rest sea We and inst chil eve Be rem at a
All r veh SAE pra tem
In de
x
ter
Center seating position: The head restraint must be adjusted into the lowest possible position. Pass the tether strap over the head restraint.
Adjust the tether strap according to the
5 3 0 au
0 0 2
Before installing any child- restraint device or child seat,
please read the following: Never install a rearward-facing child- restraint system in the front passenge seat of this vehicle. Your vehicle is equipped with an airb supplemental restraint system for the front passenger. Because the backre on any rearward-facing child-restrain system, of the kind designed for infan under 1 year and 20 Ibs/9 kg, would within the airbag's deployment range you should never mount such a devic in the front passenger seat, since the impact of the airbag against the child restraint's backrest could lead to
child restraint manufacturer's instruc- tions.
serious or fatal injuries. If it is necessary for a child, not an infant, to ride in the front seat, certain precautions should be taken. First, move the passenger seat as far away from the instrument panel as possible This important precaution is intended maximize the distance between the airbag and the child. Older children should be tightly secured with a safe belt, after they have outgrown a boos seat that is appropriate for their age, height and weight.
60nTransporting children safely
-safety locks the safety lever on the rear doors ward:
oor can now be opened from the e only.
Child Slide down
The d outsid
5 3 0 d
e2 2 6
Child-restraint system security All of the rear belt retractors and the front passenger's safety belt can be locked for mounting and securing child-
5 3 0 u s1
0 4
LATCH child-restraint system LATCH: Lower Anchors and Tethers for CHildren
5 3 0 u e2
2 9
restraint systems. Information regarding this is located near the buckle latch of each safety belt.
Lock the safety belt Pull the entire length of the belt from the belt retractor. Allow the reel to retract the belt somewhat and engage the buckle, then tighten the belt against the child-restraint system. The retrac- tion mechanism is now locked.
Release the safety belt Release the buckle, remove the child- restraint device and allow the belt retractor to reel the belt completely in.
The rear outer seating positions are provided with anchorage points for a LATCH child-restraint system. The illustration shows the anchorage points in the left rear seat as an example.
Canadian models only: The anchorage points for the LATCH child-restraint system are indicated by buttons, refer to illustration.
Remove cover panel by pulling it off toward the front. Simply put it back on to reattach it.
To install a LATCH child-restraint system, please follow the manu-
facturer's operating instructions and safety precautions.<
61n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Vehicle Memory, Key Memory
mples for Key Memory:
utomatic adjustment of the driver's eat, outside mirror and steering heel with settings stored in the emory for the individual driver when e vehicle is unlocked, refer to age 51 alling up customized settings for the utomatic climate control when nlocking the vehicle, refer to age 107.
You will see this symbol through- out the Owner's Manual. It is to
ind you at appropriate places of the ings that are available to you.<
he s a
n ed
n y m-
e
Exa
>A s w m th p
>C a u p
rem sett
Da In
de x
How the system functions You have probably frequently wished that you could configure individual functions of your vehicle to reflect your
4 6 3 d
e0 2 9
When your vehicle is unlocked with t remote control, the vehicle recognize the individual user by means of a dat exchange with the key, and makes adjustments accordingly.
In order for you to distinguish betwee the remote control master keys, color decals are supplied together with the keys.
What the system can do Your BMW Sports Activity Vehicle center can provide you with details o the capabilities of the Vehicle Memor and Key Memory systems. A few exa ples follow below:
own personal requirements. In engi- neering your vehicle, BMW has included several user-defined func- tions in the vehicle's design. Your BMW Sports Activity Vehicle center can make these settings for you.
There are settings related to the vehicle Vehicle Memory and settings related to individuals Key Memory. You can configure up to four different basic positions for four different persons. The only requirement is that each person uses his or her own remote control key.
Examples for Vehicle Memory:
>Various signals that can serve as acknowledgment for locking and unlocking the vehicle, refer to pages 31, 34
>Deactivating/activating the Follow m home lamps function, refer to page 99.
62n
re starting age the parking brake sure that the gearshift lever is in tral or the selector lever in Park if
vehicle is equipped with an auto- tic transmission ress the clutch pedal.
Do not allow the engine to run in enclosed spaces. Breathing the st gases poses an extreme health nd can lead to unconsciousness eath. The exhaust gases contain n monoxide, an odorless and col- , but highly toxic gas. t leave the vehicle unattended
Ignition lock Starting the engine
Ignition key positions 0 Steering lock engaged
1 Steering lock disengaged
3 9 0 d
e0 1 0
An acoustic warning is sounded when you fail to remove the ignition key after opening the driver's door.
Vehicles with automatic trans- mission:
Do not move the selector lever from the Park position until the engine is running ignition key in position 2. In order to turn the key to position 0 or to remove it, first move the selector lever to the Park position Interlock.<
Steering lock disengaged You will find that it is often easier to turn the ignition key from position 0 to posi-
he engine running, since an unat- d vehicle with a running engine sents a safety hazard.<
When driving, standing at idle, and parking the vehicle, take care id contact between the hot st system and flammable mate-
e.g. grass, hay, leaves, etc. Such ct could lead to a fire, resulting in s personal injury and property ge.<
2 Ignition on
3 Starting the engine
Steering lock engaged The key can only be inserted or removed in this position.
After removing the key, turn the steering wheel slightly to the left or right until you hear the lock engage.
Once the ignition has been switched off ignition key in position 0 or removed the radio functions are still available for approx. 20 minutes. Turn the radio back on to use it.
tion 1 when you move the steering wheel slightly to help disengage the lock. Individual electrical devices are ready for operation.
Starting the engine Vehicles with manual transmis- sion: depress the clutch when
starting the engine. If you do not, a lock prevents the engine from starting.<
Befo >Eng >Be
Neu the ma
>Dep
exhau risk, a and d carbo orless Do no
to avo exhau rials, conta seriou dama
63n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Starting the engine Switching off the engine
n the ignition key to position 1 or 0.
Do not remove the ignition key while the vehicle is still moving. If
do so, the steering will lock. ays remove the ignition key and age the steering lock before leaving vehicle. icles with manual transmission: ays engage the parking brake when king on slopes and inclined sur- s. Even placing the gearshift lever st gear or reverse may not provide quate resistance to rolling. icles with automatic transmission: e the selector lever in Park.<
or
y
t/ a-
e at
s e,
Tur
you Alw eng the Veh Alw par face in 1 ade Veh Plac
Re pa
ir s
Da ta
In de
x
icles with automatic transmission:
vehicle must be stationary and the ctor lever in Park before you can ove the ignition key.
g, at
r- nt
Veh
The sele rem
Do not press the accelerator pedal while starting the engine.
BMW X5 3.0i: Do not actuate the starter for too
short a time. Do not turn it for more than approx. 20 seconds. Release the ignition key immediately as soon as the engine starts. BMW X5 4.4i, 4.6is: Your BMW is equipped with the conve- nience starting feature. Simply turn the ignition key to position 3 starter and then release it immediately. The starter actuation continues to operate automatically for a certain period of time and is stopped automati-
Should the engine fail to start on the first attempt, if it is very hot or cold, f instance:
>Press the accelerator pedal halfwa down while engaging the starter.
Cold starts at altitudes above 3,300 f 1,000 meters and at very low temper tures, from approx. +5 7/15 6:
>For the initial start attempt, allow th starter to remain engaged somewh longer, approx. 10 seconds.
Engine idle speed is controlled by the engine computer system. Increased speeds at start-up are normal and should decrease as the engine warm up. If engine speed does not decreas
cally as soon as the engine has started. The automatic starting mode will not operate if the battery voltage is low. The engine can be started by means of jump-starting, refer to page 162.<
Do not allow the engine to warm up by leaving it running while the vehicle remains stationary. Instead, begin to drive immediately at a moderate engine speed.
service is required.
To prevent the battery from dischargin always switch off electrical devices th are not in use. Switch the ignition off when the vehicle is not being driven.
Extended starting attempts, cha acterized by excessively freque
or long periods with the starter engaged, can lead to damage of the catalytic converter.<
64nParking brake Manual transmission
the clutch pedal all the way down time you shift, pressing the gear- ever into its proper end position.
Press each shift l
3 6 0 d
e0 4 4
ss the clutch when starting the le, too, otherwise, the interlock event the engine from starting if utch is not depressed.
Depre vehic will pr the cl
The parking brake is primarily designed to prevent the vehicle from rolling while parked. It operates against the rear wheels.
5 3 0 d
e2 6 2
If, in exceptional circumstances, it should be necessary to engage
the parking brake while the vehicle is in motion, do not pull it with excessive pressure. Keep your thumb pressed against the release button while care- fully pulling up the lever to apply mod- erate pressure. Excessive pressure can lead to over- braking and loss of traction fishtailing at the rear axle. The brake lamps do not come on when the parking brake is engaged. Vehicles with manual transmission: Always engage the parking brake when parking on slopes and inclined sur-
To engage The lever engages automatically when you pull it up and the indicator lamp comes on in the instrument cluster in ignition key position 2, refer to pages 19 and 20.
To release Pull up slightly on the lever, press the button and lower the lever.
faces. Even placing the gearshift lever in 1st gear or reverse may not provide adequate resistance to rolling. Vehicles with automatic transmission: Place the selector lever in Park.<
To avoid corrosion, apply the parking brake lightly from time to time when coasting to a standstill at a traffic signal, for instance, provided that it is safe to do so.
65n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Manual transmission Automatic transmission with Steptronic*
ector lever positions P R N D M/S
transmission range display varies ording to the equipment of your
an
m
Sel
The acc
3 9 0 u s6
0 7
Re pa
ir s
Da ta
In de
x
icle, refer to the illustrations.
rting the engine engine can only be started in ctor lever positions Park or Neutral.
t on
n
to
el n
veh
Sta The sele
Reverse Select Reverse only when the vehicle is completely stopped. Press the gearshift lever to the left to overcome the resis- tance.
As you do this, the backup lamps will turn on automatically when the ignition key is in position 2.
Do not hold the vehicle in place on slopes by slipping or riding the
clutch. Use the parking brake instead, since a slipping clutch increases clutch wear.<
You can drive as with a normal auto- matic transmission. In addition, you c also shift manually.
When you move the selector lever fro
5 3 0 u s0
4 0
the D position to the left into the M/S range, the performance-oriented shif programs of the automatic transmissi are engaged. As soon as you tap the selector lever in the + or direction, Steptronic changes the gear. The manual mode is engaged. When you wish to use the automatic transmissio mode again, move the selector lever the right into the D position.
Under normal operating conditions, fu consumption is lowest when driving i position D.
66nAutomatic transmission with Steptronic*
ive Automatic shift ram osition is designed for driving all normal operating conditions. ward gears are available.
own kickdown mode, you achieve um acceleration and in posi- top speed. ss the accelerator pedal past the sed resistance point at the full-
le position.
D Dr prog This p under All for
Kickd In the maxim tion D Depre increa thrott
A detent prevents inadvertent shifts to the Reverse or Park selector lever posi- tions. To disengage the detent, press
5 3 0 d
e2 6 3
If you leave the vehicle with the engine running, move the selector
lever to the Park position and engage the parking brake. If you fail to do this, the vehicle could move. Do not leave the vehicle unattended with the engine running, since an unat- tended vehicle with a running engine represents a safety hazard.<
P Park Select only when the vehicle is sta- tionary. The transmission locks to pre- vent the rear wheels from turning.
R Reverse
While the vehicle is stationary and before shifting out of Park or Neu-
tral, depress the footbrake in order to disengage the selector lever's lock mechanism Shiftlock. Hold the footbrake down until starting off. The vehicle will otherwise creep when a drive position is engaged.<
Select only when the vehicle is sta- tionary.
N Neutral Idle Select only if your journey is interrupted for a longer period.
67n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Automatic transmission with Steptronic*
ctronic transmission control dule
If the indicator lamp comes on or the message TRANS.FAIL- SAFE PROG appears in the
ck Control, there is a fault in the smission system.
g the vehicle to a stop. Move the smission selector lever to P. Set the king brake and switch the engine ignition key to position 0.
it a few seconds, then start the ine. e indicator lamp goes out after a seconds, normal transmission per- ance has been restored. You may
tinue to drive as usual. If the indi- r lamp does not go out, you can e the selector lever in all positions. ever, the vehicle will now only drive ard with limited gear selection.
is happens, avoid extreme engine s and consult the nearest
W Sports Activity Vehicle center.
e
e
p-
h
a
Ele mo
Che tran
Brin tran par off,
Wa eng If th few form con cato plac How forw
If th load BM
Da In
de x
Do not work in the engine com- partment when a drive gear is
aged. If you do this, the vehicle ld move.<
rmation on jump-starting, tow- ting and towing begins on page 162.
eng cou
Info star
M/S Manual mode and Sport Program When you change from D to M/S, the Sport Program is activated. This is indi-
5 3 0 d
e2 6 4
Upshifts or downshifts will only be carried out at appropriate engine speeds and road speeds. If the engin speed is too high, for instance, the downshift will not be executed. The gear selected will appear briefly in th instrument cluster followed by the current gear.
If you are driving in the manual mode and wish to accelerate ra
idly to pass another vehicle, for example shift down manually or wit the kickdown function.<
You can only change from M/S to selector lever positions P, R and N vi
cated by D S in the transmission range display. The Sport Program is designed for performance-oriented driving.
With the first brief touch, the automatic transmission shifts from the Sport Pro- gram to the manual mode. Whenever you tap the selector lever in the + direction, the transmission shifts up, and when you tap it in the direc- tion, the transmission will shift down. Depending on the equipment version, 1 to 5 or M1 to M5 is indicated in the transmission range display.
the D position.
68nIndicator/Headlamp asher Washer/Wiper system/Rain sensor*
rs retracted home position ft wiper is partially concealed by od. In order to bring the wipers to ly a vertical position this is tant for changing the wiper blades fold the wipers out during frosty er, for example:
h the lever in position 1, switch off ignition as soon as the wipers e to a stop.
ipped with a rain sensor:
itch on the wipers with the lever in ition 1, 2 or 4 en the wipers are approx. vertical, itch the ignition off.
Wipe The le the ho rough impor or to weath
>Wit the com
If equ
1. Sw pos
2. Wh sw
anging the wiper blades, refer to 150.
Fold the wipers back down onto the windshield before you turn the n key to position 1 or 2 again. If o not, they could be damaged.<
For ch page
ignitio you d
1 High beams blue indicator
2 Headlamp flasher blue indicator
3 Turn signal indicators green
5 3 0 d
e2 6 5
0 Wipers retracted
1 Intermittent mode or rain sensor 2 Normal wipe
5 3 0 d
e3 2 4
indicator accompanied by periodic clicking sound from the relay
To signal briefly Press the lever up to but not beyond the pressure point. It then returns to the center position when released.
If the indicator lamp and the clicking from the relay are both
faster than normal, one of the turn signal indicators has failed.<
3 Fast wipe
4 Brief wipe
5 Clean the windshield
6 Special wash program*
7 Rotary dial for control of the wipe interval or the sensitivity of the rain sensor
69n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Washer/Wiper system/Rain sensor*
cial wash program* t 5; there are also several additional h cycles, and the headlamps are ned*. program is recommended after you e driven on extremely dirty roads.
an the headlamps* ith the special wash program 6 ith every actuation of clean the indshield 5 when the vehicle's hting is switched on, the head- mps will be cleaned at appropriate tervals.
o- , ch
n
st rs
Spe As a was clea This hav
Cle >W >W
w lig la in
Da In
de x
Intermittent mode Not on vehicles with rain sensor.
You can set the wipe interval to four stages with rotary dial 7. In addition, the wipe interval is varied automatically depending on road speed.
Rain sensor The rain sensor is positioned on the windshield, directly in front of the inte- rior rearview mirror.
To activate the rain sensor: Move the lever to position 1 with the ignition key in position 1 or higher. The wipers travel once across the wind-
Switch the rain sensor off in aut matic car washes. If you do not
damage may occur if the wipers swit on unintentionally.<
Normal wipe The system switches automatically to intermittent mode when the vehicle is not moving, not on vehicles with rain sensor.
Fast wipe The wipers operate at normal speed when the vehicle is not moving, not o vehicles with rain sensor.
shield, regardless of the weather conditions.
You can leave the lever permanently in position 1. It is then only necessary to activate the rain sensor from ignition key position 1 and up. To do this, turn rotary dial 7 briefly.
To adjust the sensitivity of the rain sensor: Turn rotary dial 7.
Deactivating the rain sensor: Move lever to position 0.
Clean the windshield The system sprays washer fluid again the windshield and activates the wipe for a brief period.
70nWasher/Wiper system/Rain sensor*
amming is deleted:
rox. 10 seconds after the lever is ed in position 0 or r the engine is switched off.
anging the wiper blade, refer to 150.
-
Progr
>App plac
>afte
For ch page
Do not use the washers if there is any danger that the fluid will
freeze on the windshield. If you do so, your vision could be obscured. For this reason, use an antifreeze agent, refer to page 141. Do not use the washers when the reser- voir is empty. This could cause damage to the washer pump.<
Windshield washer jets The windshield washer jets are warmed automatically when the ignition key is in position 2.
Rear window wiper 0 Retracted position of the rear window
wiper
5 3 0 d
e2 6 6
1 Rear window wiper in intermittent mode. When reverse gear is engaged, continuous operation is switched on automatically
2 Clean the rear window
You can also program the interval:
>Switch briefly from position 0 to posi tion 1
>The time until reactivation from position 0 to 1 is the programmed interval, max. 30 seconds.
71n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cruise control*
maintain and store speed or ccelerate
ss button + briefly: system maintains and stores the ent vehicle speed. Every time you fly touch the button, the speed eases by approx. 0.6 mph/1 km/h.
ss and hold button + : vehicle accelerates without pres- on the accelerator pedal. When
release the button, the system ntains and stores the current speed.
If, on a downhill gradient, the engine's braking effect is not suffi-
e
t r- <
To to a
Pre The curr brie incr
Pre The sure you mai
Re pa
ir s
Da ta
In de
x
t, the controlled speed can be eeded. Speed can drop on uphill es if the engine output is insuffi- t.<
cien exc grad cien
You can automatically maintain and store any desired vehicle speed above approx. 20 mph/30 km/h.
You can use cruise control whenever the system is active while the engine is running.
To activate the system
From ignition key position 2: Press button; the indicator lamp in th instrument cluster comes on, refer to page 22. You can now use the cruise control.
Do not use cruise control on twisting roads, when high traffic
density prevents driving at a constan speed, when the road surface is slick snow, rain, ice or when the road su face is loose rocks, gravel or sand.
To deactivate the system
Press the button repeatedly until the indicator lamp in the instrument clust goes out.
The cruise control is also deactivated when the ignition key is turned into position 0.
The speed stored in the memory is deleted.
72nCruise control*
call the stored setting
button: ehicle accelerates to and main- the last speed stored.
To re
Press The v tains
To decelerate
Press button briefly: When cruise control is active, every brief touch of the button reduces the speed by approx. 0.6 mph/1 km/h.
Press and hold button : With the cruise control active, the system automatically reduces the throttle opening to slow the vehicle. When you release the button, the system maintains and stores the cur- rent speed.
To interrupt the cruise control
When the system is activated, press button 1. The indicator lamp stays on. You can use the cruise control again whenever required by calling up the speed that was stored last.
In addition, the system is automatically interrupted in response to the following conditions:
>When you apply pressure to the brake pedal
>When you apply pressure to the clutch pedal or when you move the
> If you exceed or fall below the con- trolled speed for an extended period, by depressing the accelerator, for example.
73n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
warning e outside temperature drops to rox. +37.5 7/+3 6, a signal nds as a warning and the display hes for a brief period.
The ice warning does not alter the fact that surface ice can form at
peratures above +37.5 7/+3 6, ridges or shaded road surfaces, for
ance.<
Odometer, outside temperature display
1 Odometer
2 Trip odometer
3 Outside temperature display
3 9 0 u s6
0 8
Outside temperature display The outside temperature appears in the display from ignition key position 1 and higher.
Re pa
ir s
Da ta
In de
x
change the units of measure /7 by
ng and holding down the , refer to arrow, with the ign y in position 1 en turning the ignition key to same time the units of mea- ent in the temperature displa automatic climate control w nged, refer to page 105.
o to page 80.
Odometer You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster, refer to arrow.
The range of available displays varies according to your individual vehicle's equipment.
Trip odometer To reset the trip odometer to zero, press the button, refer to arrow, with the ignition key in position 1 or 2.
You can ment 6
1. pressi button tion ke
2. and th At the surem of the be cha
Refer als
-
i-
0.
y ill
Ice If th app sou flas
tem on b inst
74nTachometer Energy control
X5 3.0i, 4.4i tes the current fuel consumption g, on Canadian vehicles in liters/ m. This allows you to see whether
BMW Indica in mp 100 k
3 9 0 u s0
0 5
urrent driving style is conducive l economy with minimum exhaust ions.
the vehicle is stationary, the y goes to Maximum zero on ian models.
your c to fue emiss
When displa Canad
BMW X5 3.0i, 4.4i Do not operate the engine with the needle in the red overspeed zone of the gauge, refer to arrow.
5 3 0 u s2
2 7
BMW X5 4.6is The orange pre-warning zone displays current permissible engine speeds, depending on the engine temperature.
5 3 0 u s2
3 1
To protect the engine, the engine man- agement system automatically inter- rupts the fuel supply in this range.
As the engine temperature increases, some of the sectors for this pre-warning zone will go out one after the other.
Avoid engine speeds in the pre-warning zone if possible.
Do not operate the engine with the needle in the red overspeed zone of the gauge, refer to arrow.
To protect the engine, the engine man- agement system automatically inter- rupts the fuel supply in this range.
75n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Temperature gauge Fuel gauge
Do not drive until the tank is com- pletely empty, as otherwise
ine functions are not ensured and age can occur.<
en you switch on the ignition, the cator lamp comes on briefly to con- that the system is operational.
e
eng dam
Wh indi firm
Re pa
ir s
Da ta
he e
In de
x
BMW X5 4.6is The general operating temperature is between 176 7/80 6 and 248 7/ 120 6. Do not exceed the maximum
5 3 0 u s2
3 2
If the indicator lamp comes on and stays on, there are approx.
>2.0 gal./8 liters 6-cylinder engine >2.5 gal./10 liters 8-cylinder engin
3 9 0 u s0
0 6
temperature of 302 7/150 6. of fuel still in the tank.
Tank capacity: approx. 24.6 gal./ approx. 93 liters.
Certain operating conditions where t tilt of the vehicle varies, such as thos encountered in mountainous areas, may cause the needle to fluctuate slightly.
76nCoolant temperature gauge Service Interval Display
nge of available displays varies ding to your individual vehicle's ment.
n lamps umber of illuminated lamps ases as the time for your next
The ra accor equip
Gree The n decre
3 9 0 u s0
0 8
maintenance visit approaches.
w lamp ield appears together with RVICE or INSPECTION.
enance is due. Please contact MW Sports Activity Vehicle
r for an appointment.
lamp aintenance deadline has been d.
Yello This f OILSE
Maint your B cente
Red The m passe
Blue The engine is still cold. Drive at mod- erate engine and vehicle speeds.
3 9 0 d
e0 0 7
Between the blue and red zones Normal operating range. It is not unusual for the needle to rise as far as the edge of the red zone.
Red When you switch on the ignition, the warning lamp comes on briefly to con- firm that the system is operational.
If the warning lamp comes on while driving or the message COOLANT TEMPERATURE appears in the Check Control: the engine is overheated. Switch off the engine immediately and allow it to cool down.
Checking coolant level, refer to page 143.
77n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Check Control
rity 1
se defects are immediately indi- d by an acoustic signal and a
hing warning symbol 1. Simulta- us defects will be displayed con-
he e
Prio
The cate flas neo
Re pa
ir s
Da ta
In de
x
utively. These status messages ain in the display until the defects corrected. They cannot be deleted ressing the CHECK button 3:
ELEASE PARKINGBRAKE OOLANT TEMPERATURE he coolant is overheated. Stop the ehicle immediately and switch off e engine, refer to pages 76 and 143 TOP!ENGINE OILPRESS he oil pressure is too low. Stop the ehicle immediately and switch off e engine, refer to pages 19 and 141
re :
sec rem are by p
>R >C
T v th
>S T v th
Graphic display* The following alerts or status messages are displayed with icons from ignition key position 2 and up until the defects
3 9 0 d
e1 2 1
Alphanumeric display* Text messages are used to alert the driver to system malfunctions when t ignition key is turned to position 2. Th
3 9 0 u s1
1 1
are corrected:
1 Check low beams
2 Add washer fluid (goes out after approx. 1 minute)
3 Door open
4 Tailgate open
5 Check brake and tail lamps. A defec- tive center brake lamp is indicated by the upper symbol.
When you open the door after stopping, a warning signal sounds without a visual indicator for:
>LIGHTS ON >KEY IN IGNITION LOCK.
alert is accompanied by an acoustic signal.
1 Status messages symbol
2 Display
3 CHECK button
Messages concerning system faults a differentiated based on two priorities
78nCheck Control
ECK FILLER CAP ck to see whether the fuel filler has been closed properly, refer age 25 TSIDE TEMP. +23 7/5 6 display is only an example. The
rent temperature is displayed at side temperatures of +37.5 7/ 6 and below, refer also to e 73 E PRESSURE SET* RDC has imported the current tion pressure in the tires as the et values which the system will
nitor, refer to page 97 ECK TIRE PRESSURE*
>CH Che cap to p
>OU This cur out +3 pag
>TIR The infla targ mo
>CH
ssure to specifications at the ear- t opportunity, e.g. next stop to el, refer to page 97 ECONTROL INACTIVE* mporary interference of the RDC system fault, refer to page 98
ECK BRAKE LIGHTS mp has failed or the electrical uit has a fault, refer to page 153 onsult a BMW Sports Activity icle center
Che pre lies refu
>TIR A te or a
>CH A la circ or c Veh
>CHECK BRAKE FLUID Indicates that brake fluid is down to approximately the minimum level. Top off the brake fluid at the next opportunity, refer to page 144. Have the cause of the brake fluid loss diag- nosed and corrected by your BMW Sports Activity Vehicle center
>TIRE LOW/FLAT* Reduce vehicle speed immediately and stop the vehicle. Avoid hard brake applications. Do not oversteer, refer to page 98
>SELFLEVEL SUSP.INACT* Please consult the nearest BMW Sports Activity Vehicle center
Priority 2
These displays appear for 20 seconds when the ignition key is turned to posi- tion 2. The warning symbols remain after the message disappears. You can call up the messages again for display by pressing the CHECK button.
>TRUNKLID OPEN This message appears only at the start of a trip
>DOOR OPEN This message appears after a min- imal defined road speed has been exceeded
>FASTEN SEAT BELTS* In addition to this message, an indi-
max. 35 mph/max. 60 km/h* These displays appear consecutively. Do not exceed a maximum speed of 35 mph/60 km/h. Please consult the nearest BMW Sports Activity Vehicle center
>LIMIT* You will see this message if the pro- grammed speed limit has been exceeded, refer to page 85.
cator lamp with the safety belt icon appears and an acoustical signal is sounded
>WASHER FLUID LOW The fluid level is too low; top off at the next opportunity, refer to page 141
>CHECK ENGINE OIL LEV The oil level is at the absolute min- imum; refill as soon as possible, refer to page 141. Do not drive more than approx. 30 miles/50 km until you add oil
79n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Check Control
check the Check Control ss the CHECK button 3 with the tion key in position 2: CK CONTROL OK appears in the lay.
malfunctions are present in the itored systems.
mputer can find a description of the com- r on pages 80 and 85 as well as in
Owner's Manual for the Onboard puter.
You can have the Check Control and computer messages dis-
ng e
en
o
To Pre igni CHE disp
No mon
Co You pute the Com
Re pa
ir s
Da ta
In de
x
ed in a different language.<
ul-
play
>CHECK LOWBEAM LIGHTS CHECK SIDE LIGHTS CHECK REAR LIGHTS CHECK FRONT FOGLAMPS CHECK LICPLATE LIGHT CHECK HIGHBEAM LIGHT CHECK BACK UP LIGHTS Defective bulb or circuit, refer to page 151 or consult a BMW Sports Activity Vehicle center
>TRANS. FAILSAFE PROG* Please consult the nearest BMW Sports Activity Vehicle center, refer to page 67
>CHECK BRAKE LININGS Have the brake pads inspected by your BMW Sports Activity Vehicle
Displays after completion of trip All of the malfunctions registered duri the trip appear consecutively when th ignition key is turned to position 0.
The following displays will appear wh appropriate:
>LIGHTS ON >KEY IN IGNITION LOCK >CHECK ENGINE OIL LEV
Add engine oil at the next opportu- nity, e.g. next stop to refuel, refer t page 141.
This display appears when you open the driver's door after parking the vehicle. A supplementary acoustic signal is also heard.
center, refer to page 133 >CHECK COOLANT LEVEL
Coolant too low, top off at the next opportunity, refer to page 143
>ENGINE FAILSAFE PROG There is a fault in the engine's elec- tronic control system. You can continue to drive with reduced engine output or engine speed. Have the system checked by your BMW Sports Activity Vehicle center.
Status messages remain available fo period of approx. three minutes after the display goes out and the key is removed from the ignition lock. Press the CHECK button 3. If there were m tiple messages, press the CHECK button repeatedly to view them all in sequence.
80nComputer
ing range and average speed omputer bases its calculations cruising range on the previous g style and conditions.
omputer ignores any time spent he vehicle stationary and the e switched off in its average calculations.
ncel the display button in the turn signal lever is ed briefly while the average speed layed, the computer display can sked out.
-
Cruis The c of the drivin
The c with t engin speed
To ca If the press is disp be ma
start calculations continue to press the button in rn signal lever, the average values were just displayed for fuel con- tion and speed will be recalcu- from that point. The engine must ning for this calculation.
puter with alphanumeric ay* r vehicle has Check Control with numeric display, the system's uter is described beginning on 85 and in the Owner's Manual for nboard Computer.
.
To re If you the tu which sump lated be run
Com displ If you alpha comp page the O
Mode selection From ignition key position 1 and up, you can call up information from the computer using the button in the turn
5 3 0 d
e2 2 8
Outside temperature and average fuel consumption You can change the units of measure- ment 6/7 for the outside tempera
3 9 0 u s1
2 6
signal lever. By pressing the button briefly in the direction of the steering column, you can call up a new function for display.
The displays appear in the following order: outside temperature, average fuel consumption, cruising range, average speed.
Starting with ignition key position 1, the last active setting is displayed.
The range of available displays varies according to your individual vehicle's equipment.
ture display by
1. pressing and holding the trip odo- meter reset button with the ignition key in position 1
2. and then turning the ignition key to 0 At the same time the units of mea- surement in the temperature display of the automatic climate control will be changed, refer to page 105.
Refer also to page 73.
81n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Multi-Information Display MID
isplay for the entry and query but- ns. Depending on the operating ode, the functions and alternatives at can be selected at the buttons
re displayed here
ntry and query buttons for operating e various onboard systems
ne
ti-
k
6 D to m th a
7 E th
Da ta
In de
x
Central display The MID serves as the central display and operation for the following onboard systems:
>Digital clock, e.g. time display, date >Audio systems radio, cassette, CD >Computer, e.g. fuel consumption,
cruising range >Cellular phone, e.g. dialing.
You will find explanations and notes for operating the digital clock and the computer on the following pages. Please refer to the separate Owner's Manuals for operating the audio sys- tems, the cellular phone and the onboard computer.
1 Function button for audio systems
2 Function button for the cellular pho
3 Indicator lamp for independent ven lation
3 9 0 u s7
0 5
Any unrealistic numerical entries will not be accepted.
All stored data will be lost if the power supply is interrupted. Time display, switch-on times for independent heating and ventilation, distance and cruise control speed limit may have to be reset once the power supply has been re-established.<
> remains on if switch-on time is active
> flashes while operating
4 Function button for the digital cloc and computer
5 Indicator display for the various onboard systems
82nDigital clock in the MID
ange the date
the left side of the button.
.
the right side of the button: ots and the DATE display flash.
ange the setting:
To ch
Press
Press
Press The d
To ch
on left or right, or hold the button .
re the entry:
the right side of the button.
lock takes leap years into account erefore does not have to be reset
ally.
Press down
To sto
Press
The c and th manu
Only make entries when the vehicle is stationary to avoid
endangering yourself or other road users.<
To call up time or date
Press the left side of the button.
Display shows:
You can have the time displayed in 12 or 24 hours.
To change the time
Press the left side of the button.
Press the right side of the button: The dots flash in the display.
To change the setting:
Press on the left or right, or hold the button down.
To change the display:
Press the left side of the button.
If the 12-hour time display is in use, AM or PM appears after the time.
To store the entry:
Press the right side of the button.
83n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Digital clock in the MID
tart the stopwatch function:
ss the right side of the button.
ake an intermediate time reading:
ss.
ss. stopwatch display can be seen nting up; the stopwatch continues
To s
Pre
To t
Pre
Pre The cou
Re pa
ir s
Da ta
In de
x
un.
alt the stopwatch:
ss the right side of the button.
The stopwatch is halted when the ignition key is turned back to 0,
starts to run again when the ignition is turned to 1.<
to r
To h
Pre
but key
Reminder signal You can program a reminder signal Memo to be heard every hour, so that you are sure not to miss a news broadcast.
Press the left side of the button.
Press: MEMO OFF appears in the display for entry and query buttons, and the tone symbol will appear in the upper right of the display.
Stopwatch
Press the left side of the button.
Press.
Display shows:
A signal is then heard 15 seconds before each hour.
84nDigital clock in the MID
tly switching the endent ventilation d off
The independent ventilation func- tion can only be called up in igni- ey position 1.<
the left side of the button.
.
Direc indep on an
tion k
Press
Press
l
l
Enter the switch-on times for the independent ventilation You can enter two different switch-on times. The ventilation will shut off automati- cally after 30 minutes.
Please follow the instructions for operating the independent ventila-
tion that start on page 111.<
Press the left side of the button.
To enter the time:
Press on the left/right, or hold the button down.
To confirm the entry:
Press the right side of the button.
The activated time is marked with an asterisk.
Press on the left/right.
Display shows:
Press the right side of the button: Display flashes, e.g. TIMER 1.
The switch-on times remain stored unti new entries are made.
You can change switch-on times that have already been stored by making a new time entry as described above.
When the switch-on time is active, the LED comes on in the MID. During actua operation of the ventilation, the LED flashes. The LED goes out when the system is switched off.
To activate/deactivate the time:
Press twice.
85n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer* in the MID
lay shows:
er the limit by pressing the function ons.
orrect an entry:
ss the left side of the button and eat the entry.
tore the entry:
ss the right side of the button.
e - in -
e
Disp
Ent butt
To c
Pre rep
To s
Pre
Re pa
ir s
Da ta
In de
x
Only make entries when the vehicle is stationary to avoid
endangering yourself or other road users.<
Computer calculations begin at the start of the journey. Information can also be called up in the display by remote control, refer to page 89.
Speed limit Speed limit entry:
You can enter the road speed here at which you wish to hear and see a reminder signal: a signal will sound, the word LIMIT will flash, and with th Check Control with alphanumeric dis play*, the speed limit warning stored the memory will appear on the instru ment cluster briefly.
The speed limit reminder is only repeated if road speed has fallen at least 3 mph/approx. 5 km/h below th preset speed limit.
Press the right side of the button.
Press.
Press the right side of the button.
86nComputer* in the MID
rrect an entry:
the left side of the button and t the entry.
re the entry:
the right side of the button.
king stored value:
the right side of the button.
To co
Press repea
To sto
Press
Chec
Press
the left side of the button.
Press
Adopting the current speed as the speed limit:
Press the right side of the button.
Press.
Press twice at right.
Deactivating the speed limit:
Distance to destination The remaining distance to the destina- tion will be displayed on the screen. Enter the entire distance before starting the journey.
To enter:
Press the right side of the button.
Press the left side of the button.
Press the right side of the button.
Press.
The LIMIT display goes out, but the stored value is not lost and can be reactivated by pressing the LIMIT button.
Press the right side of the button.
Display shows:
You can enter the distance by pressing the function buttons.
87n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer* in the MID
l consumption can have the average fuel con- ption displayed for two different ances, for example a complete ney and part of the journey.
tart the calculation, select the NS function with the engine running.
ss the right side of the button.
ss the left or right side of the button: display will show the average fuel sumption.
d k
e.
l / ne
Fue You sum dist jour
To s CO
Pre
Pre The con
Re pa
ir s
Da ta
In de
x
estart the fuel consumption ulation:
ss the left or right side of the button.
ss the right side of the button.
e To r calc
Pre
Pre
Estimated time of arrival When you have entered the distance to your destination, you can obtain an estimated time of arrival display which is continuously updated by the com- puter as your average driving period varies.
Press the right side of the button.
Press the right side of the button: The estimated time of arrival is dis- played.
Cruising range The distance which the vehicle shoul cover on the remaining fuel in the tan is displayed.
Press the right side of the button.
Press: The display shows the probable rang
When you have only enough fue left to drive fewer than 30 miles
50 km, then refuel, as otherwise engi
The computer will only register fuel amounts over 1.8 gal/6 liters.
88nComputer* in the MID
rrect an entry:
on the left side of the button and t the entry.
re the entry:
the right side of the button. he ignition key to position 0.
ivate the code:
you are asked to enter the code n key in position 1 or 2:
To co
Press repea
To sto
Press Turn t
Deact
When ignitio
er the code at the function but- s.
the right side of the button.
the code has been entered cor- and confirmed with the SET , the time display appears.
>Ent ton
Press
After rectly button
Speed You can call up a display of the vehicle's average speed.
To start the calculation, select the SPEED function with the engine run- ning.
Press the right side of the button.
Press: The display shows the average speed.
To recalculate the speed:
Extended immobilizer function You can establish a code that will pre- vent the engine from being started unless the code is entered.
If you do not have access to the code, the emergency deactivation procedure will have to be carried out, refer to next page.
Establishing and activating the code:
Press the right side of the button.
Press the right side of the button.
Press the left side of the button.
Display shows:
Enter the code with the function but- tons.
89n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer* in the MID
ave all the available information layed, press
e button on the lever until the dis- lay shows PROG e SET button.
btain individual items of informa- , press the button in briefly as often ecessary.
r of
To h disp
> th p
> th
To o tion as n
Re pa
ir s
Da ta
In de
x
ch
ro- ay.
:
After three incorrect code entries, or three attempts to start the engine without a code entry, the alarm will sound for 30 seconds on vehicles fitted with an alarm system.
Deactivating the alarm in an emergency:
If you have forgotten the code, proceed as follows:
1. Disconnect the battery, wait approx. 2 minutes, then reconnect it. Note that on vehicles with an alarm system, the alarm will sound
2. Set the ignition key to position 1: The time display will count down for the next ten minutes
Remote control The button on the turn signal indicato lever can be used to select the items computer information which are to
5 3 0 d
e2 2 8
3. After ten minutes, start the engine.
If the code becomes available again in the meantime, it can be
entered during the waiting period after pressing the CODE button.<
be displayed.
To do this, press:
> the button on the lever until PROG shows on the display
> the MID buttons in the order in whi you wish the information to be dis- played. Each time an entry is stored, the p gram number appears on the displ
To terminate the selection procedure
Press the right side of the button.
90n
stical signals istance from an object is indicated t with a higher intermittent tone,
t the rear with a lower intermittent As the distance between vehicle bject decreases, the intervals en the tones become shorter. tinuous tone indicates the pres- of an object less than approx. 1 ft/ away.
arning signal is canceled after x. 3 seconds if you are moving el to a wall.
e is a malfunction of the system: dicator lamp flashes and a short
Park Distance Control PDC*
The concept PDC provides extra safety and conve- nience during parking maneuvers by pro- viding an acoustic signal to indicate the distance between your front and rear bumpers and the nearest object. To do this, four ultrasonic sensors in the front and rear bumpers each measure the dis- tance to the nearest object. The detection range of the front sensors and the two sensors located at the ends of the rear bumper is approx. 2 ft/60 cm, while the rear center sensors can detect objects to a distance of approx. 5 ft/1.50 m.
PDC is a parking aid which regis-
Manual activation Press the button; the indicator lamp comes on.
5 3 0 d
e2 2 9
y signal tone is sounded
u activate PDC with the button n you select reverse for the first
e after switching on the ignition > if a malfunction occurs while the PDC
system is active.
h the system off and have the of the malfunction corrected by MW Sports Activity Vehicle
r.
ters objects when approaching slowly, as is the case during usual parking maneuvers. Avoid approaching objects too fast, otherwise the system may give warning of physical obstacles too late.<
Automatic function The system starts to operate automati- cally approx. one second after you select reverse or move the selector lever into the R position with the igni- tion key in position 2.
Wait for this brief period before you start reversing.<
Manual deactivation Press the button again; the indicator lamp goes out.
Automatic deactivation After driving a distance of more than approx. 160 ft/50 m or exceeding a speed of approx. 20 mph/30 km/h, the system switches off and the indicator lamp goes out. Switch the system on again as required.
Acou The d in fron and a tone. and o betwe A con ence 30 cm
The w appro parall
If ther The in stead
> if yo >whe
tim
Switc cause your B cente
91n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
PDC* Dynamic Stability Control DSC
icator lamp The indicator lamp in the instru- ment cluster goes out shortly after you switch on the ignition,
r to page 21.
cator lamp ashes: system is active and governs drive braking force.
e indicator lamp fails to go out after engine is started, or comes on ing normal driving and stays on: system is either defective or was tched off with the button: the stabi- g applications described to the left no longer available. The vehicle will ain completely operational, how-
in
y g
s
y ke
Ind
refe
Indi The and
If th the dur The swi lizin are rem
Re pa
ir s
Da ta
In de
x
r, without DSC.
sult your BMW Sports Activity icle center to have the system aired.
eve
Con Veh rep
The PDC system does not remove the driver's personal responsibility
for evaluating the distance between the vehicle and any objects. Even when sensors are involved, there is a blind spot in which objects cannot be detected. This applies especially in those cases where the system approaches the physical constraints of ultrasonic measurement, as occurs with tow bars and trailer couplings, and in the vicinity of thin or wedge-shaped objects. Similarly, low objects that have already been detected - e.g. a curb- stone - may disappear out of the range of the sensors before a continuous tone is emitted.
The concept DSC maintains vehicle stability, even critical driving situations.
The system optimizes vehicle stabilit during acceleration and when startin from a full stop, as well as optimizing traction. In addition, it recognizes unstable vehicle conditions, such as understeering or oversteering, and, a far as is possible within the laws of physics, keeps the vehicle on a stead course by adapting the rpms and bra applications to the individual wheels.
The system starts up automatically each time you start the engine.
Loud sources of sound, inside and out- side the vehicle, could drown out the PDC signal tone.<
Keep the sensors clean and free of ice or snow in order to ensure
that they continue to operate effectively. Do not apply high pressure spray to the sensors for a prolonged period of time. Maintain an adequate distance of more than 4 in/10 cm.<
92nDynamic Stability Control DSC
mic Brake Control DBC is an integral component of the ystem.
ystem responds to sudden, high- ity applications of force to the pedal by automatically braking hicle with maximum boost to
ve the shortest-possible braking ces during panic stops. This exploits all the benefits of ABS.
t reduce the pressure exerted st the brake pedal until the g maneuver has been completed.
is deactivated when you release ake pedal.
-
Dyna DBC DSC s
The s intens brake the ve achie distan system
Do no again brakin DBC the br
To switch the system off Press the button; the indicator lamp comes on and stays on.
5 3 0 d
e2 3 0
As a result of the traction interven tion, the brakes may be subjected
to additional loads when the system is switched off. For this reason, it is pos- sible that the braking intervention will be disabled automatically for a brief period in order to limit brake tempera- ture. To maintain vehicle stability, always drive with the system switched on when possible.<
To switch the system on again Press the button again; the indicator lamp goes out.
Traction intervention remains active; that is, braking intervention will con- tinue.
In the following exceptional circum- stances, it may be effective to switch off the DSC for a short period:
>When rocking the vehicle or starting off in deep snow or on loose surfaces
>On sandy road surfaces >On poor surfaces with deep ruts > If the wheels churn on muddy
surfaces >When driving with snow chains.
The laws of physics cannot be repealed, even with DSC. An
appropriate driving style always remains the responsibility of the driver. We therefore urge you to avoid using the additional safety margin of the system as an excuse for taking risks. Do not make any modifications to the DSC system. Service procedures on the system are to be performed by authorized technicians only.<
93n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Hill Descent Control HDC
use HDC h manual transmission: HDC in first gear and in Reverse e the engine's braking effect is inished in the higher gears.
h automatic transmission: can use HDC in every drive ition.
he event of a fault indicator lamp goes out in the HDC e or does not come on when HDC
witched on: is temporarily not available if
ke temperature is too high.
If the DSC indicator lamp also
To Wit Use sinc dim
Wit You pos
In t The mod is s HDC bra
Re pa
ir s
Da ta
In de
x
lights up: There is a fault in the HDC and
systems. Have your BMW Sports ivity Vehicle center inspect this tem as soon as possible.
ve
DSC Act sys
The concept HDC is a system for driving downhill in steep terrain. This system reduces vehicle speed on steep downhill gradi- ents, thus allowing you to maintain con- trol of your BMW under these condi- tions. The vehicle moves at slightly more than walking speed without active interven- tion from the driver.
HDC is available for activation at vehicle speeds below approx. 20 mph/ 35 km/h. When driving down steep hills with a speed below approx. 20 mph/ 35 km/h, the vehicle reduces speed automatically down to slightly more
To switch the system on Press the button. The indicator lamp comes on.
The indicator lamp flashes when the
5 3 0 d
e2 3 1
than walking speed (approx. 5 mph/ 8 km/h) and then maintains this speed at a constant.
You can use the accelerator or brakes to vary this automatically controlled speed within a range extending from approx. 3 mph/5 km/h to 15 mph/ 25 km/h. You can specify a target speed within the same range by using the +/ buttons of the cruise control.
HDC is automatically deactivated once vehicle speed again exceeds approx. 35 mph/60 km/h.
brakes are applied automatically.
To switch the system off Press the button again; the indicator lamp goes out.
HDC is deactivated automatically abo a road speed of approx. 35 mph/ 60 km/h and when the ignition is switched off.
94nSelf-leveling suspension* 2-axle self-leveling suspension*
ges in ride height are initiated manually, using the control , refer to page 95, or automati-
n response to specific speeds. the ride height is selected manu- e driver has the additional option
ising the ride-height selection by ng a new command during the tment process.
the vehicle is stationary, the executes ride-height changes in
irections (up and down) when- he doors are closed. The tailgate/ e may be open. The system raises hicle only when the engine is run-
Chan either button cally i When ally, th of rev enteri adjus
When system both d ever t liftgat the ve ning.
ystem's automatic self-leveling e automatically compensates for ions in the vehicle's load.
Frequent changes in ride height initiated at short intervals can eat the compressor, causing the
to briefly suspend active opera-
The s featur variat
overh system tion.<
The warning lamp for the self- leveling suspension comes on, or the message SELFLEVEL
SUSP.INACT appears in the Check Control: there is a malfunction in the self-leveling suspension.
Stop and inspect the vehicle. If it is riding significantly lower in the rear than in the front, or if it is sitting at an incline left rear compared to right rear - con- sult the nearest BMW Sports Activity Vehicle center. Drive with appropriate caution in the meantime. The vehicle has reduced ground clearance or driving comfort is noticeably reduced.
Even if the attitude of the vehicle is
The concept Your vehicle is equipped with 2-axle self-leveling suspension acting on both the front and rear suspension. This system combines automatic self-lev- eling, which compensates for variations in front-to-rear load-distribution pat- terns, with a selection feature allowing drivers to choose from among several ride-height options.
You may choose from among the fol- lowing ride heights:
>Standard The standard setting is intended for most operating conditions, including
normal, you should consult the nearest BMW Sports Activity Vehicle center if the warning lamp indicates a system malfunction.
trailer towing >Off-Road
Higher ride height for increased ground clearance
>Access Lowers vehicle for more convenient cargo handling or easier passenger ingress and exits
95n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
2-axle self-leveling suspension*
sing ilable only when the engine is run- .
m Standard to Off-Road:
ss button 1 while traveling at a ed of less than approx. 30 mph/ m/h.
m Access to Standard:
ress button 1 or he setting automatically reverts to e standard setting once the vehicle
xceeds a speed of roughly 20 mph/ 5 km/h.
d ut for
Rai Ava ning
Fro
Pre spe 50 k
Fro
>P >T
th e 3
5 3 0 d
e2 1 9
Da In
de x
Ride-height display 1 Off-Road
2 Standard
3 Access
5 3 0 d
e2 1 8
When the suspension reaches the new ride height the flashing LED reverts to continuous operation, an the LED for the earlier level goes o
>LED for current ride height flashes roughly 3 seconds when you press the button: change in ride height is not possible.
The LEDs not only show the current ride height, but also indicate changes:
>LED on: indicates the vehicle's cur- rent ride height
>Ride-height LED flashes while the LED for the earlier level remains on: the ride height is being adjusted to a new level, either automatically or in response to driver input at the button.
96n2-axle self-leveling suspension*
Lowering Available with ignition key in position 2.
From Standard to Access:
1. Press button 2 while traveling at less than approx. 50 mph/80 km/h. The system enters its preselection mode. The preselection mode is canceled >by pressing button 1 >automatically once the vehicle
exceeds a speed of approx. 50 mph/80 km/h or roughly 60 seconds after button 2 is pressed
2. Reduce speed to below approx. 15 mph/25 km/h within roughly
From Off-Road to Standard: >Press button 2 or >automatically once you exceed a
speed of approx. 30 mph/50 km/h.
60 seconds after pressing button 2.
When you press button 2 at speeds below approx. 15 mph/
25 km/h the system automatically lowers the vehicle to the Access level.<
97n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
pa ir
s
Tire Pressure Monitor RDC*
s of tire pressure fter a certain period of time, the tion pressure has gone down sig- antly, which is normal for any tire, yellow indicator lamp comes on or message CHECK TIRE PRES- E appears in the Check Control.
alerts you that you should have the inflated to the specified pressures oon as possible.
If you are prompted to check the tire pressure shortly after a cor-
ion has been made, this indicates the corrected values were not urate. Please check the inflation ssure again and make corrections ording to the inflation pressure e. After that reactivate the system.<
do
til
v- E
Los If, a infla nific the the SUR
This tires as s
rect that acc pre acc tabl
Re Da
ta In
de x
- nt
e- t c-
s
The concept RDC monitors the tire pressures at all four tires, even when the vehicle is moving. The system provides an alert whenever the inflation pressure drops significantly below the specified pres- sure in one or more tires.
In order for the system to learn the cor- rect tire inflation pressure, check the inflation pressures in all tires, refer to the table on page 27 and make any necessary corrections. Then activate the system.
This indicator lamp in the instru- ment cluster or the Check Con- trol will inform you if the tire
To switch the system on 1. Turn the ignition key to position 2,
not start the engine 2. Maintain pressure on the button un
5 3 0 d
e2 3 2
pressure is different from the learned values.
the yellow indicator lamp in the instrument cluster comes on for se eral seconds or the message TIR PRESSURE SET appears in the Check Control
3. After you have driven for a few min utes, the RDC will import the curre inflation pressure in the tires as the reference values which the system will monitor.
You will only have to repeat this proc dure if the tire inflation pressure mus be corrected. Otherwise, the RDC fun tions automatically when the ignition key is in position 2, and thus operate whenever the vehicle is driven.
98nTire Pressure Monitor RDC* Adaptive brake light
daptive brake light provides s of following vehicles with an tion of the intensity with which akes are being applied in your ehicle.
isplay occurs in two stages:
mal braking: brake light units within the tail ps and the high-mount brake p integrated within the rear iler both light up with normal nsity d braking or braking with ABS ive: tail lamps also come on, lighting with the same intensity as the ke lamps to provide a more con- uous warning.
The a driver indica the br own v
The d
>Nor The lam lam spo inte
>Har act The up bra spic
Flat tire If there is a tire failure with a loss of inflation pressure, the red indicator lamp comes on or the message TIRE LOW/FLAT appears in the Check Control. In addition, an acoustic signal sounds.
If this occurs, reduce vehicle speed immediately and stop the vehicle in a safe location. Avoid hard brake applica- tions. Do not oversteer. Replace the flat tire.
The spare tire which is available in your vehicle as standard equip-
ment is equipped with the electronics
System malfunction During the period of the malfunction, the yellow indicator lamp comes on or the message TIRECONTROL INAC- TIVE appears in the Check Control.
You will also see the same message
> in the event of a system malfunction > if a wheel is mounted without the
RDC electronics > if, in addition to the spare tire, addi-
tional wheels with RDC electronics are on board
>after installation of one or several wheels with an electronics system still unknown to the system.
required for RDC and, following activa- tion of the system, is also monitored after it is mounted.<
RDC cannot alert you to severe and sudden tire damage caused
by external factors.<
Have the tires changed at your BMW Sports Activity Vehicle
center. Your BMW Sports Activity Vehicle center has the information needed for working with RDC and is equipped with the necessary special tools.<
It takes a few minutes to learn the new wheel electronics ID numbers after system activation. Only then can RDC detect and report a flat tire.
Please contact your BMW Sports Activity Vehicle center for additional information.
99n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
matic headlamp control* When the switch is set to this position the system automati- cally activates or deactivates the
eams in response to changes in nt light, e. g. in tunnels, at dusk, ll as rain and snow.
The vehicle's external lamps remain on constantly when you on the fog lamps after the head- have come on automatically.<
Automatic headlamp control cannot serve as a substitute for iver's judgement in determining
Parking lamps/Low beams
Parking lamps side marker lamps
The front, rear and side vehicle lighting is switched on. You can
5 3 0 u s2
1 5
Follow me home lamps: When you activate the headlamp
flasher after parking the vehicle and switching off the lamps, the low beams will come on for a brief period. You may also have this function deactivated if you wish.<
LIGHTS ON warning Whenever you open the driver's door, after having turned the ignition key to position 0, you will hear an acoustic signal for a few seconds to remind you that the lamps have not been switched off.
On vehicles with alphanumeric Check
Re pa
ir s
Da ta
In de
x
the vehicle lamps should be ed on. For example, the sensors t able to detect fog. To avoid risks, you should respond to kinds of low-visibility situations itching the headlamps on manu-
You can have the sensitivity of your vehicle's automatic head- control adjusted.<
use the parking lamps for parking. For lighting on one side for parking as an additional feature, refer to page 100.
Low beams When the ignition is switched off and the low beams are on, only the parking lamps side marker
lamps remain on.
Control*: The reminder is given through the Check Control.
Daytime driving lamps* The headlamps are automatically switched on for daylight driving at ignition key position 2.
Auto
low b ambie as we
switch lamps
the dr when switch are no safety these by sw ally.<
lamp
100nInstrument lighting High beams/Standing lamps Fog lamps
amps A green indicator lamp appears in the instrument cluster to indi- cate that the front fog lamps are
Fog l
5 3 0 u s2
1 0
high beams are switched on, the mps go out.
If the automatic headlamp control is activated, the low beams will atically be switched on when the og lamps are switched on.<
on.
If the fog la
autom front f
Turn the rotary dial to adjust the illumi- nation intensity.
5 3 0 u s2
1 6
1 High beams blue indicator lamp
2 Headlamp flasher blue indicator lamp
5 3 0 d
e2 6 5
3 Standing lamps
Standing lamps, left or right* As an additional feature, you can illuminate your vehicle on either side for parking, if you wish to do so:
With the ignition key in position 0, engage the lever in the appropriate turn signal position.
101n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Interior lamps
twell and cargo area lamps lamps are controlled in the same ner as the front interior lamps.
nt area lighting* lighting system in the two exterior ors illuminates the ground in the near the two front doors. It is also
trolled in the same manner as the t interior lamps, but it does not tion while the vehicle is moving.
In order to prevent battery dis- charge, all of the lamps in the
icle are switched off automatically rox. 15 minutes after the ignition
Foo The man
Fro This mirr area con fron func
veh app
Re pa
ir s
Da ta
In de
x
is turned to position 0.<
The interior lamps operate automati- cally.
Switching the interior lamps on and off manually
5 3 0 d
e3 3 7
Rear reading lamps* Switched on and off with the button next to each lamp, refer to arrows.
5 3 0 u s0
5 7
Press the button briefly.
If you want the interior lamps to remain off all the time, press and hold the button for approx. 3 seconds.
Press the button briefly to revert to normal operation.
The button for the interior lamps in the rear passenger area only switches these lamps on and off.
Front reading lamps* Switched on and off with the button 2 next to each lamp.
102nAir conditioner
the wind- s
ody 104
on
4 Rear footwell ventilation
5 Airflow for the upper body in the rear seat 104
6 Temperature 103
7 Air distribution 103
r supply 103
ar window defroster 103
r conditioning 103
circulated-air mode 103
1 Airflow directed toward shield and side window
2 Airflow for the upper b
3 Front footwell ventilati
5 3 0 u s2
2 2
8 Ai
9 Re
10 Ai
11 Re
103n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Air conditioner
irculated-air mode You can respond to unpleas- ant odors outside the vehicle
emporarily switching off the outside upply. The system then recirculates air currently within the vehicle.
u have a steering wheel with multi- tion buttons with the button for the
rculated-air mode, you can also use button to switch to the recirculated-
ode, refer to page 23.
If the windows fog over in the recirculated-air mode, switch the
rculated-air mode off and increase air supply as required.<
at-
- on
s
Rec
by t air s the
If yo func reci this air m
reci the
Re pa
ir s
Da ta
In de
x
a- er er
Temperature The graduations on the dial provide general reference values for the interior temper- ature. We recommend
+70 7/+22 6 as a comfortable setting. When you start the vehicle, the system adjusts the air to the selected temperature as quickly as possible, and then maintains that temperature constantly.
Air distribution You can direct air to flow onto the windows , toward the upper body and into the
Rear window defroster When the rear window defroster is activated, the
indicator lamp comes on. The rear window defroster switches off autom ically.
Air conditioning The air is cooled and dehu midified and depending
the temperature setting warmed again. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce condensation forming on the window by switching on the air conditioning.
footwell . All intermediate settings are possible. In the setting, there is a low flow of air onto the windows to keep them free of conden- sation.
Air supply You can adjust the air supply through an infinitely-variable range. The heating and venti- lation become more and more
effective as the air supply settings are increased. In the 0 setting, the blower and climate control are switched off and the outside air supply is blocked.
During air conditioning condens tion forms, which then exits und
the vehicle. Traces of condensed wat of this kind are thus normal.<
104nAir conditioner
frost windows and remove ensation can specify an interior tempera- that is comfortable for you with
To de cond 1. You
ture
5 3 0 u s1
4 9
rotary temperature dial. A good rting point is +70 7/+22 6 the air distribution rotary dial
the blower/air supply rotary dial pletely to the right
se the vent outlets in the rear ting area itch on the rear window defroster efrost the rear window.
.
-
the sta
2. Set to
3. Set com
4. Clo sea
5. Sw to d
Draft-free ventilation You can adjust the vent outlets for the upper body area completely for your personal comfort:
5 3 0 d
e2 7 0
Rear passenger area ventilation 1 Rotary dial for opening and closing
the vent outlets through an infinitely- variable range
5 3 0 d
e2 7 1
1 Rotary dials for opening and closing the vent outlets through an infinitely- variable range
2 Levers for adjusting airflow direction
3 With the rotary dial you can adjust the temperature of the incoming air: >Turn toward blue colder >Turn toward red warmer.
2 Levers for adjusting airflow direction
The air that flows out here is somewhat cooler than the air delivered to the foot well.
Particle filter The particle filter removes dust and pollen from the incoming air. It is replaced by your BMW Sports Activity Vehicle center during regular mainte- nance. A substantial reduction in air supply indicates that the filter must be replaced before normal maintenance.
105n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic climate control*
Re pa
ir s
Da ta
In de
x
ard the wind- ows
body 109
tion
4 Rear footwell ventilation
5 Airflow for the upper body in the re seat 109
6 Automatic air distribution and air supply 107
dividual air distribution 107
emperature control ft-hand side 107
isplay for temperature and air upply 107
1 Airflow directed tow shield and side wind
2 Airflow for the upper
3 Front footwell ventila
5 3 0 u s2
2 3
ar
7 In
8 T le
9 D s
106nAutomatic climate control*
nd remove
13 Automatic recirculated-air control (AUC) 108
14 Rear window defroster 108
15 Air supply 107
aximum cooling 108 using up residual heat 109
r grille for interior temperature nsor please keep clear and obstructed
16 M or
17 Ai se un
10 Temperature control right-hand side 107
11 To defrost windows a condensation 108
12 Air conditioning 108
5 3 0 u s2
2 3
107n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Automatic climate control*
supply In the AUTO program, the air supply is controlled
matically. AUTO will appear in the lay 9, refer to the overview on e 105. Press the left or right side of button to vary the air supply. When r setting is displayed by bars, the matic air supply is switched off.
omatic air distribution maintains its ing. You can reactivate the auto- ic air supply by pressing the AUTO on.
en you press the left side of the but- during operation at minimum blower ed all displays are canceled: the er, heating and air conditioner are
tched off. The outside air supply is ed. You can switch the system k on by pressing any button of the matic climate control, except the
X button 16.
l ,
he
he
r
le
Air
auto disp pag the you auto Aut sett mat butt
Wh ton spe blow swi clos bac auto MA
Da ta
In de
x
defrost windows and remove densation
This program quickly removes ice and conden-
on from the windshield and the side dows.
his n.
3
To con
sati win
Tips for pleasant driving Use the automatic system; that is press AUTO button 6. Select an interior temperature that is comfortable for you.
Detailed setting options are described for you in the following section.
Your BMW center can program the settings of your vehicle in such
a manner that, when you unlock the vehicle with your individualized key, your own personalized setting for the automatic climate control is initiated.<
Automatic air distribution The AUTO program
Individual air distribution You can cancel the AUTO program by selecting specific air distribution patterns for your persona comfort, the automatic air
supply remains in operation. You can direct air to flow onto the windows toward the upper body , and into t footwell . You can reactivate the automatic air distribution mode by selecting the AUTO button.
Temperature You can make individual temperature settings on t
assumes the adjustment of the air distribution and the air supply for you and also adapts the temperature to external influences summer, winter to meet preferences you can specify.
driver's side or the front passenger side. Your settings will be shown in the display 9. The displayed temperatures are reference values fo the interior temperature. We recom- mend +70 7/+22 6 as a comfortab setting, whether the air conditioner is operating or not. When you start the vehicle, this system ensures that the selected temperature is achieved as quickly as possible. It then maintains t temperature, regardless of the seaso
To change the units of measurement 6/7 of the display, refer to page 7 or 80.
108nAutomatic climate control*
have a steering wheel with multi- on buttons with the button for ulated-air mode, refer to page 23, an also use this button to switch en Off and the recirculated-air or AUC and the recirculated-air .
If the windows fog over in the recirculated-air mode, switch the ulated-air mode off and increase r supply as required.<
window defroster When the rear window defroster is activated,
dicator lamp comes on. The indow defroster switches off atically.
If you functi recirc you c betwe mode mode
recirc the ai
Rear
the in rear w autom
Air conditioning The air is cooled and dehumidified and
depending on the temperature setting warmed again. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce condensation forming on the windows by switching on the air conditioning.
During air conditioning condensa- tion forms, which then exits under
the vehicle. Traces of condensed water of this kind are thus normal.<
Automatic recirculated-air control AUC
If there are unpleasant odors or pollutants in the
outside air, you can temporarily block the air supply from the outside. The system then recirculates the air currently within the vehicle. Press the button repeatedly to run through the following control sequence
> Indicator lamps off: outside air supply operational
>Left-hand indicator lamp on AUC mode: the system recognizes pollut- ants in the outside air and blocks the flow of air when necessary. The
Maximum cooling You will get maximum cooling capacity using this
program if the engine is running and the outside temperature is above approx. +41 7/+5 6.
The temperature display 9 jumps to +60 7/+16 6, the system switches over to the recirculated-air mode, and the air streams out of the ventilation grill with the maximum air supply. That is why you need to keep these open if you select this program.
system then recirculates the air currently within the vehicle. Depending on the air quality, the automatic system then switches back and forth between outside air supply and recirculation of the air within the vehicle
>Right-hand indicator lamp on: the outside air supply into the vehicle is completely blocked. The system then recirculates the air currently within the vehicle.
109n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Automatic climate control*
r passenger area climate trol
ir supply
emperature
djusting the direction of the airflow
e m
g y-
he
Rea con 1 A
2 T
3 A
5 3 0 d
e2 7 2
Da ta
In de
x
Residual heat mode The heat which is stored in the engine is utilized for
heating the interior when the engine has been switched off (while waiting at a railroad crossing, for instance). In ignition key position 1, you can alter the settings of the automatic climate control. With the ignition key in posi- tion 0, the system automatically directs heated air to the windshield, side windows and footwells.
This function may be activated when the outside temperature is
below approx. 59 7/15 6, the engine is at operating temperature, and the
Draft-free ventilation You can adjust the vent outlets for th upper body area to select the optimu airflow rates and directions for your
5 3 0 d
e2 7 0
battery is adequately charged. The LED on the button will light up when all conditions have been met.<
personal comfort:
1 Rotary dials for opening and closin the vent outlets through an infinitel variable range
2 Selector levers for airflow direction
3 With the rotary dial you can adjust t temperature of the incoming air. >Turn toward blue colder >Turn toward red warmer.
110nAutomatic climate control*
cle filter, ated-charcoal filter article filter removes dust and from the incoming air. The acti- -charcoal filter provides additional ction by filtering gaseous pollut- rom the outside air. Your Sports Activity Vehicle center es this combined filter as a stan- art of your scheduled mainte- . A substantial reduction in air y indicates that the filter must be ed before normal maintenance.
Parti activ The p pollen vated prote ants f BMW replac dard p nance suppl replac
0 Blower off
I Maximum blower speed
5 3 0 d
e2 7 3
Temperature Passengers in the rear seating area can adjust their own temperature for the vent outlets:
5 3 0 d
e2 7 4
You can adjust the air supply for the vent outlets through an infinitely-vari- able range between the 0 and I settings.
In the 0 setting, the blower is switched off and the supply of air through the vent outlets is blocked.
Individual adjustments on the front-seat control elements influence the air supply for rear passenger area climate control.
>Turn toward blue colder >Turn toward red warmer
When you start the vehicle, this system ensures that the selected temperature is achieved as quickly as possible. It then maintains this temperature, regardless of the season.
A temperature setting is only possible when the blower is
switched on, not in the 0 setting.<
111n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Roller sun blinds* Independent ventilation system*
en a preselected activation time is the independent ventilation system perational at outside temperatures ve +60 7/+16 6, or by direct tch activation.
air emerges via the vent outlets for upper body. Therefore, the vent ets must be open for the system to rate.
he ng - ol.
s
he
e r s
Wh set, is o abo swi
The the outl ope
Re pa
ir s
Da ta
In de
x
en
Roller sun blinds for rear side windows* Use the strap to pull out the blinds, then hook them in the provided attachment.
With roller sun blinds attached, do not open the windows during
travel. The blinds may otherwise be damaged by the wind.<
You can use this system to ventilate t interior and lower its temperature, usi the blower of the independent ventila tion or of the automatic climate contr
The independent ventilation system i operated via the Multi-Information display MID, refer to page 84 or via t onboard computer, refer to the sepa- rate Owner's Manual.
You can set two different times for th system to start; it will remain active fo 30 minutes. You can also switch it on and off directly. Since the system use a substantial amount of electrical current, you should refrain from switching it on twice in succession
112n
Before programming, read the User information section on 114.<
nal hand-held transmitter If this symbol is present on the packaging or in the instructions of the original hand-held trans-
, it may be assumed that this held transmitter is compatible he BMW Universal Transmitter.
BMW Universal Transmitter
The concept The BMW Universal Transmitter replaces up to three hand-held trans- mitters of different devices such as garage door openers, alarm systems, or door locking systems. The BMW Universal Transmitter recognizes and learns the transmitted signal of each of the original hand-held transmitters.
The signal of an original hand-held transmitter can be programmed on one of the three channel keys. Following that, each of the devices can be actu- ated with the appropriately-programmed channel key. The indicator lamp flashes to confirm transmission of the signal.
During programming and before every remote actuation of a
programmed device by the BMW Universal Transmitter, check to be sure that there are no persons, animals or objects within the actuation range of the device in order to prevent possible injuries or damage. Also, comply with the safety precautions of the original hand-held transmitter.<
To Canadian residents: During programming, your hand-
held transmitter may automatically stop transmitting after two seconds. This may not be long enough to program the
If the vehicle is sold, the memory of the channel keys should be cleared as described on page 114.
BMW Universal Transmitter. If you are programming from one of these hand- held transmitters, the Universal Trans- mitter's light may begin to flash in a series of double-blinks. If this occurs, continue to hold the button of the Universal Transmitter while you reacti- vate your hand-held transmitter. You may have to repeat this function several times while programming.<
page
Origi
mitter hand- with t
113n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
BMW Universal Transmitter
old the original hand-held trans- itter toward the receiver 3 a aximum of 2 in/5 cm away ress the transmission key of the riginal hand-held transmitter, refer arrow 2, and the desired channel
ey of the Integrated BMW Universal ransmitter, refer to arrow 1, simulta- eously. Release both keys as soon s the indicator lamp flashes rapidly o program other original hand-held ansmitters, repeat steps 3 and 4.
y
1
3. H m m
4. P o to k T n a
5. T tr
5 3 0 u s1
3 7
Da ta
In de
x
The corresponding channel key is now programmed with the signal of the orig-
hand-held transmitter.
inal
Checking for the conversion code To determine whether the original hand-held transmitter is provided with a conversion-code system, you may either read the instructions for the orig- inal hand-held transmitter or program a channel key as described on the next page left-hand column under Programming.
Then press and hold the programmed channel key of the BMW Universal Transmitter. If the indicator lamp of the BMW Universal Transmitter flashes for two seconds and then comes on steadily, the original hand-held trans- mitter is provided with a conversion-
Programming 1 Channel keys
2 Indicator lamp
3 Receiver for programming 5 3 0 u s1
3 6
code system. With a conversion-code system, program the channel keys as described on the next page right-hand column under Programming a hand- held transmitter with conversion code.
If you have additional questions, please consult your BMW Sports
Activity Vehicle center or call 1-800-355-3515. You can also visit this website: www.bmwusa.com.<
Read and comply with the safet precautions on the previous
page.<
1. Turn the ignition key to position 2 2. For initial use:
Press and hold both outside keys until the indicator lamp 2 flashes, and then release them. The three chann keys are cleared
114nBMW Universal Transmitter
information t use this BMW Universal Trans- with any garage door opener that safety stop and reverse features uired by federal safety standards, cludes any garage door opener l manufactured before April 1st,
evice complies with Section 15 of C Rules. Operation is subject to
llowing two conditions: as defined regulations, this device must not armful interference, and must be ed against interference from al sources to prevent unautho-
or inadvertent activation.
User Do no mitter lacks as req this in mode 1982.
This d the FC the fo in the emit h shield extern rized
Programming a hand-held transmitter with conversion code
Read and comply with the safety precautions on page 112.<
When programming the BMW Universal Transmitter, consult the instructions for the specific device. For using the BMW Universal Trans- mitter with a conversion-code system, note the following supplemental programming instructions:
A second person facilitates programming of the BMW
Universal Transmitter.<
Clearing the channel keys Read and comply with the safety precautions on page 112.<
The memory of individual channel keys cannot be cleared. However, the three channel keys can be cleared together as follows:
>Press and hold both outside keys of the BMW Universal Transmitter until the indicator lamp flashes, and then release them.
All of the channel keys are cleared.
1. Program the BMW Universal Trans- mitter as described previously under Programming
2. Press and hold the programming key on the receiver of the device for approx. two seconds until the programming lamp on the device comes on
3. Press the desired channel key of the BMW Universal Transmitter three times.
If you have additional questions, please consult your BMW Sports
Activity Vehicle center.<
115n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Glove compartment
hargeable flashlight* ated on the left-hand side of the e compartment. tures integral overload-protection, t can be left in its holder continu- ly.
To avoid completely discharging and possibly damaging the lamp,
ays ensure that it is switched off re inserting it in the socket.<
r
nd r
Rec Loc glov Fea so i ous
alw befo
Re pa
ir s
Da ta
In de
x
To open Pull the handle. The lamp inside the glove compartment comes on.
5 3 0 d
e2 7 5
To lock Use one of the master keys. A maste key is also required for unlocking.
If you turn over only your door a ignition key for valet parking, fo
example, refer to page 30, access to the glove compartment is not possible.<
To close Fold the cover up.
To prevent injury in the event of an accident, close the glove
compartment immediately after use.<
116nStorage compartments Cellular phone* Beverage holder
t the sliding cover, refer to illustra-
ve the insert which is a compart-
Fron Below tion. Remo
5 3 0 d
e2 7 7
for storing pens.
ment
You will find two storage compartments in the armrest between the front seats.
To open the top compartment: Press the button, refer to arrow 1.
5 3 0 d
e2 7 6
Hands-free system On vehicles with telephone prepara- tion*, the hands-free microphone is positioned in the headliner.
5 3 0 u s0
7 0
You will find a cellular phone* in this compartment.
To move the armrest or open the lower compartment: Pull the handle, refer to arrow 2. In this compartment, you will find a coin tray and a storage compartment* for cassettes or CDs.
You will find additional storage compartments in all of the doors as well as on the backrests of the front seats.
For further information on the cellular phone, refer to the Telephone Owner's Manual.
117n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Beverage holder Glasses compartment Ashtray, front
empty ss the edge of the lid, refer to arrow: ashtray moves up and can be oved.
d To Pre the rem
5 3 0 d
e3 3 8
Re pa
ir s
Da ta
In de
x
arette lighter, front ss the lighter 1 in.
lighter can be removed as soon as tracts.
Hold or touch the hot cigarette lighter by the knob only. Holding
ouching it in other areas could result urns. cigarette lighter remains opera- al when the ignition key has been oved. For this reason, do not leave upervised children in the vehicle.<
Cig Pre
The it re
or t in b The tion rem uns
Rear At the end of the center console under the lighter.
Press briefly to open; push back inward
5 3 0 d
e2 7 8
Press the button to open; fold upwar to close.
5 3 0 d
e2 7 9
to close.
118nAshtray, front Ashtray, rear Cigarette lighter, rear
the lighter in. ghter can be removed as soon as acts.
Press The li it retr
5 3 0 d
e2 3 9
Hold or touch the hot cigarette lighter by the knob only. Holding ching it in other areas could result ns. igarette lighter remains opera- when the ignition key has been ed. For this reason, do not leave ervised children in the vehicle.<
or tou in bur The c tional remov unsup
Cigarette lighter socket This socket is suitable for attaching power supplies for flashlights, car vacuum cleaners and other appliances up to a rating of approx. 200 watts at 12 volts. Avoid damage to the socket caused by inserting plugs of a different shape or size.
You will find additional power outlets in the cargo area, refer to page 124.
To empty Remove the insert tray.
5 3 0 d
e2 8 2
119n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Ski bag*
ress button 1 downward and swing e cover forward ress button 2: the cover in the argo area is unlocked. ogether with the pull-out cargo
e
2. P th
3. P c T
5 3 0 d
e2 8 3
Re pa
ir s
Da ta
In de
x
oor, refer to page 124: pull the floor ut, release the cover and slide the oor back in the floor then conceals e cover xtend the ski bag between the front eats. The zipper provides conven- nt access to the inside of the bag, r can also be left open to promote rying.
tore the ski bag, perform the above s in reverse sequence.
fl o fl th
4. E s ie o d
To s step
The ski bag allows the safe and clean transport of up to 4 pairs of standard skis or up to two snowboards.
With the length of the ski bag and the additional space in the cargo area, you can store skis with a length of up to 6.8 ft/2.1 m. Because of the tapered shape of the bag, the ski bag can only accommodate two pairs of skis with a length of 6.8 ft/2.1 m.
Loading 1. Fold the center armrest outward.
Loosen the trim from the upper Velcro fastener and place it on th
5 3 0 u s0
7 7
armrest
120nSki bag* Cargo area
the rear backrests down into the recess and pull forward, o arrow.
Fold Reach refer t
5 3 0 d
e2 8 5
When you fold back the backrest, be sure that the catch engages ely. The red warning indicator dis- rs in the recess when the catch is ed.
enter safety belt can be retracted hen the larger backrest is ed.<
secur appea engag The c only w engag
Securing the load Secure the bag's contents by tightening down the retaining
strap at the buckle.<
5 3 0 d
e2 8 4
If the cover in the cargo area is concealed by the pull-out cargo
floor, do not fold the larger rear back- rest down. If you do so, it will damage the cover.<
Please be sure that the skis are clean before loading them into the bag. Be careful to avoid damage from sharp edges.
121n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cargo area
oving the cover se both hands to press the cover gether on both sides and slide it rward, refer to arrow 1
e t le.
Rem 1. U
to fo
5 3 0 d
e2 8 8
Re pa
ir s
Da ta
In de
x
ift the cover upward from the rear n both sides, refer to arrow 2, and emove it.
tallation e the cover into the retainers on h sides and then press it down at rear until it engages.
2. L o r
Ins Slid bot the
Cargo area cover Pull the cover out by the handle and hook it in the rear holders.
You can carry light objects such as
5 3 0 d
e2 8 6
When the cover is pulled out, it can b opened behind the rear-seat backres to gain access to the cargo area from the rear seats during a trip, for examp
5 3 0 d
e2 8 7
articles of clothing on the cover.
Do not place heavy or hard objects on the cover. If you do so,
they could already pose a danger to vehicle occupants during braking or evasive maneuvers.<
Before you slide it back into position, place the grip in the rear fold of the cover.
For removing the cover, refer to the next column.
122nCargo area
ach the hooks on the bottom of partition net into the eyes on both es
6. Att
the sid
5 3 0 d
e0 3 0
Partition net* 1. Remove the bag with the partition
net from the retainer by releasing the hooks from the lashing eyes on both
5 3 0 d
e0 2 8
3. Slide back the covers on the retainers for the partition net on both sides of the roof, refer to arrow
4. Insert the curved ends of the parti- 5 3 0 d
e2 8 9
sides 2. Remove the partition net from the
bag and unroll it half way
Note how the bag with the parti- tion net is secured in the vehicle
and how the partition net is rolled up and stored in the bag so that you can return everything to its place after use. If your vehicle is equiped with a pull-out cargo floor be sure to read the note on page 124.<
tion net rod in the retainers on both sides
5. Now you can slide the covers toward the front again, refer to arrow
123n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cargo area
or cover ccess the spare wheel.
elease: press the recess in the dle, refer to arrow, and raise the
rs. Flo To a
To r han
5 3 0 d
e2 9 1
Re pa
ir s
Da ta
In de
x
er with the handle.
7. When the rear backrests are folded down, you can open the Velcro strips, completely unroll the partition net, insert it in the front retainers on the roof and attach the three hooks
5 3 0 d
e0 3 1
Side covers Pull the handle to open the side cove
5 3 0 d
e2 9 0
into the eyes. The illustration shows securing at the bottom right as an example.
124nCargo area
out cargo floor* ease, pull the handle recess rd. Then pull the floor out.
Pull- To rel upwa
5 3 0 d
e2 9 2
Do not drive when the cargo floor is pulled out. t release the cargo floor on steep s. If you do, it could extend auto- ally and cause personal injuries. which is not properly secured
begin to slide if the floor extends atically and then drop to the d as a result of the rapid braking cargo floor at the limit stop.<
-
Do no grade matic A load could autom groun of the
Fold the floor cover up Lift up the black retainer on the lower side of the floor cover and hook it into the upper frame of the liftgate cutout.
5 3 0 u s0
8 6
Power outlets When you fold the cover caps up, you have access to additional power out- lets.
5 3 0 u s0
8 4
Before you fold the floor cover down, return the retainer to its original posi- tion.
You can use the power outlets for flash lights, car vacuum cleaners or other automotive appliances with up to approx. 200 watts at 12 volts. Avoid damage to the socket caused by inserting plugs of a different shape or size.
Refer also to page 118.
125n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cargo area
er
it
Re pa
ir s
Da ta
In de
x
t: et l. -
When it is extended, you can load the cargo floor:
>With up to 990 Ibs/450 kg, distrib- uted evenly across the entire surface
>With up to 330 Ibs/150 kg on the rear edge.
Do not overload the cargo floor when it is extended. If you do so,
it could cause damage. When you slide the cargo floor back in, do not grasp it on the bottom. If you do so, there is a risk of personal injury.< Raise the cargo floor
For access to the spare wheel or oth stored items:
Swing the cargo floor up and secure
5 3 0 d
e2 4 0
with the rod, see detail.
If your vehicle has a partition ne Take the bag with the partition n
out of the retainer, refer to page 122, before you raise the cargo floor pane Otherwise, the bag could slide down ward.<
126nCargo loading
Always position and secure the load correctly. If you do not, it can ger the passengers, e.g. simply braking or evasive maneuvers. t exceed the permissible gross
le weight and the permissible axle , refer to page 170. If you do, the ting safety of the vehicle is no r ensured and you are in violation law. t carry hard or heavy objects ured in the passenger compart- If you do so, they may be pro- through the air, e.g. simply braking and evasive maneuvers, ndangering vehicle occupants.<
endan during Do no vehic loads opera longe of the Do no unsec ment. jected during thus e
Stowing cargo >Position heavy cargo as far forward
as possible directly behind the backrests and as low as possible
5 3 0 d
e0 3 2
Securing the load >Secure smaller, light pieces with the
retaining straps or a luggage net*, or use elastic straps, refer to page 38
5 3 0 u s0
9 0
>Cover sharp edges and corners >Do not pile objects higher than the
top edge of the backrest >Fasten the partition net, refer to
page 122, and ensure that carried items cannot pass through the parti- tion net
> If you are transporting very heavy loads when the rear seat is not occu- pied, secure the outer safety belts in the opposite buckles.
>For large, heavy pieces, see your BMW Sports Activity Vehicle center for load-securing devices*. The lashing eyes provided at the corners of the cargo area serve for mounting these load-securing devices
>Read and comply with the informa- tion enclosed with the load-securing devices.
127n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Roof-mounted luggage rack*
Always ensure that roof-mounted loads are tightly secured, as loose can shift or even fly off the roof, g a serious hazard for following .<
smoothly. Avoid sudden accelera- nd braking maneuvers. Take cor- ently.
loads posin traffic
Drive tion a ners g
Da ta
In de
x
A special rack system is available as an optional extra for your BMW. Please comply with the precautions included with the installation instructions.
5 3 0 d
e2 9 3
Cargo loading and driving hints Roof-mounted luggage racks raise the center of gravity of the vehicle when they are loaded. For this reason, they exercise a major effect on the vehicle's handling and steering response.
You should therefore always remember not to exceed the approved roof weight, the approved gross vehicle weight or the axle loads when loading the rack.
You will find the specifications under Technical Data on page 170.
Make sure that the load is not too heavy, and attempt to distribute it
Mounting points Access to the mounting points: To fold up the cover, refer to arrow, please use the tool which is provided with the rack system.
evenly. Always load the heaviest pieces on the bottom. Be sure that adequate clearance is maintained for raising the sliding/tilt sunroof, and that objects do not project into the opening path of the liftgate.
128n
129n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Mainte-
130nBreak-in procedures
e system x. 300 miles/500 km must elapse the brake pads and rotors
ve the optimal pad-surface and patterns required for trouble-free tion and long service life later on.
ak in the separate parking brake , apply the parking brake lightly
coasting to a standstill at a traffic l, for instance, provided that traffic tions allow you to do so. oid corrosion, repeat this proce- rom time to time.
The brake lamps do not light up when the parking brake is applied.
-
Brak Appro before achie wear opera
To bre drums when signa condi To av dure f
m for the brake system servo unit ur BMW is available only when the e is running. When you move the le with the engine switched off towing, for instance substan- igher levels of pedal force will be ed to brake the vehicle.<
Vacuu on yo engin vehic when tially h requir
To ensure that your vehicle provides maximum economy throughout a long service life, we request that you observe the following instructions:
Engine and differential Up to 1,200 miles/2,000 km: Drive at varying engine speeds and road speeds, but do not exceed 4,500 rpm and the following road speeds during this initial period:
6-cylinder engines: 100 mph/160 km/h 8-cylinder engines: 106 mph/170 km/h
Obey your local and state maximum speed limits.
Tires Due to technical factors associated with their manufacture, tires do not achieve their full traction potential until an initial break-in period has elapsed. For this reason, drive with extra care during the initial 200 miles/300 km.
Obey your local and state maximum speed limits.
When the vehicle is operated on wet or slushy roads, a wedge of
water may form between the tire and the road surface. This phenomenon is referred to as aquaplaning, or hydro- planing, and can lead to partial or com
Refrain from using full throttle and avoid pressing the accelerator beyond the kickdown point.
Once you have driven 1,200 miles/ 2,000 km, engine and vehicle speeds can gradually be increased.
You should also comply with these break-in procedures should the engine or one of the differentials be replaced later in the course of the vehicle's ser- vice life.
plete loss of traction, vehicle control and braking effectiveness. Reduce your speed on wet roads.<
131n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Driving your BMW X5
k onto the paved road commending that you observe the wing points after driving on adverse surfaces, it is not as a beauty
tment for your BMW. Instead, it is nded for the maintenance of driving ty:
lean accumulations of dirt from the ody and check the undercarriage for amage lean mud, snow, ice and other aterials from the wheels and tires. heck the tires for damage heck to determine whether rocks, ravel or accumulations of dirt on the rake rotors and calipers could influ- nce braking performance. Remove ll such foreign objects
on
ry
r
e
t
r
Bac In re follo road trea inte safe
>C b d
>C m C
>C g b e a
Re pa
ir s
Da ta
In de
x
order to clean the brake rotors, pply the footbrake gently several mes while driving at a low speed. Be ure that following traffic is not ndangered by this or cleaning the parking brake, apply e lever slightly at approx. 25 mph/
0 km/h and continue to drive for pprox. 200 yards/200 meters, pro- ided that traffic conditions allow you do so.
h, t
e e
in e
> In a ti s e
>F th 4 a v to
Your BMW is right at home on all roads and byways even where the pavement ends. It combines permanent four- wheel drive with the agility of a typical passenger vehicle.
On bad roads When you are driving on bad roads, there are a few points which you should strictly observe for your own safety, for that of your passengers, and for the safety of the vehicle:
>Familiarize yourself with the vehicle before you begin driving. Do not take risks with the vehicle under any cir- cumstances
Starting from a full stop is possible uphill gradients of up to 32%. The permitted side tilt is also 50%
>While driving, watch carefully for obstacles such as rocks or holes. T to avoid these obstacles whenever possible
>On hill crests and bumpy roads, fo example, be careful to prevent the body from bottoming contact between the body and the ground. The ground clearance of the vehicl is:
8 in/200 mm with up to four passengers 7 in/180 mm fully loaded withou self-leveling suspension
>Always adapt vehicle speed to road conditions the steeper and more uneven the road surface is, the slower the vehicle's speed should be
>You can operate your vehicle on uphill and downhill gradients with a maximum slope of 50%. If you intend to drive on either an uphill or downhill gradient of this steepness, check to be sure in advance that the engine oil and coolant levels are both near the MAX mark, refer to pages 141 and 143. When driving down steep slopes, use the Hill Descent Control HDC, refer to page 93.
>Do not drive in water that is deepe than 20 inches/50 cm. If you must drive through water up to that dept drive at a walking speed and do no stop. After leaving the water, press on th footbrake gently several times whil driving at a low speed. The brake applications will help to dry the brakes, thus preventing a reduction braking performance caused by th moisture.
132nGeneral driving notes Antilock Brake System Brake system
e fluid level brake fluid level is too low and pedal travel has become longer, may be a defect in one of the two system's hydraulic circuits.
Proceed to the nearest BMW Sports Activity Vehicle r. Here increased pressure on the pedal may be required, and slight g to the side and longer braking ces may result. Please remember pt your driving style accord- <
, .
l
Brak If the brake there brake
cente brake pullin distan to ada ingly.
Brakes: Do not drive with your foot resting
on the brake pedal. Even light but con- sistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure. Hydroplaning: When driving on wet or slushy roads, reduce vehicle speed. If you do not, a wedge of water may form between the tires and the road surface. This phe- nomenon is referred to as hydroplaning or aquaplaning. It is characterized by a partial or complete loss of contact between the tires and the road surface. The ultimate results are loss of steering
The concept The Antilock Brake System ABS keeps the wheels from locking during braking thereby enhancing active driving safety
Braking with ABS If you are in a situation that requires ful braking, you will exploit the full benefits of the ABS system if you apply max- imum pedal pressure panic stop.
Pulsation at the brake pedal combined with sounds from the hydraulic circuits indicates to the driver that ABS is in its active mode.
and braking control.<
133n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Brake system
ke pads For your own safety: use only brake pads that BMW has
ased for your particular vehicle el. BMW cannot evaluate non-
roved brake pads to determine if are suited for use, and therefore not ensure the operating safety of vehicle if they are installed.<
s on in nt
ot e
en is-
Bra
rele mod app they can the
Re pa
ir s
Da ta
In de
x
y a
-
Disc brakes When the vehicle is driven only occa- sionally, during extended periods when the vehicle is not used at all, and in operating conditions where brake appli- cations are less frequent, there is an increased tendency for corrosion of the rotors and accumulation of contamina- tion on the brake pads. This occurs because the minimal pressure which must be exerted by the pads to clean the discs by brake applications is not reached.
If the brake rotors are corroded, they will tend to respond to braking with a pulsating effect which even extended
Extended or steep mountain descent should be driven in the gear in which only minimal periodic brake applicati is required. This avoids excessive stra on the brakes and possible impairme of the braking effect.
Do not coast with the clutch depressed or with the transmis-
sion or selector lever in neutral. Do n drive with the engine switched off. Th engine provides no braking effect wh the clutch is depressed or the transm sion is in neutral, and there is no power-assist for braking or steering when the engine is not running. BMW recommends having brake
application will fail to cure.
When driving in wet conditions and in heavy rain, it is advisable to apply light pressure to the brake pedal from time to time. Watch traffic conditions to ensure that this maneuver does not endanger other road users. The heat which is generated by the brake appli- cations helps to dry the brake pads and rotors. The braking force is then imme- diately available when required.
inspections performed at a BMW Sports Activity Vehicle center only. If you do not, parts of the four-wheel drive system could be damaged. Never allow floor mats, carpets or an other objects to protrude into the are around the accelerator, clutch and brake pedals and obstruct their move ment.<
134n
At a tread depth of 0.063 in/ m these indicators, signal that the ave reached the legally permis-
wear limit.
Do not drive on a deflated flat tire. A flat tire greatly impairs ng and braking response, and can o complete loss of control over hicle. overloading the vehicle so that rmitted load on the tires is not ded. Overloading leads to over- g and causes damage inside the The ultimate result can assume rm of a sudden air loss.
Tire inflation pressures Tire condition
Information for your safety The factory-approved radial tires are matched to the vehicle and have been selected to provide optimum safety and driving comfort on your vehicle when used correctly.
It is not merely the tire's service life, but also driving comfort and above all else driving safety which depend on the condition of the tires and the mainte- nance of the specified tire pressure.
Incorrect inflation pressure is a frequent cause of tire damage. It
also significantly influences the road- holding ability of your BMW. Check tire
Tire tread Tire damage Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the
3 9 0 d
e3 3 1
al vibrations encountered during l vehicle operation, e.g. caused
ntact with curbs, etc., can indicate tire or some other vehicle mal- on. This is also true for irregulari- the vehicle's handling character- such as a pronounced tendency l to the left or right. Should this , respond by immediately ing your speed.
inflation pressures including the spare wheel regularly, refer to page 26, at least every two weeks and before beginning a longer trip. If this is not done, incorrect tire pressures can cause driving instability and tire damage, ultimately resulting in an accident.<
tread pattern depth.
Tread depth should not be allowed to go below 0.12 in/3 mm, even though, the legally specified minimum tread depth, for example in Europe, is only 0.063 in/1.6 mm. Below a tread depth of 0.12 in/3 mm there is an increased risk of hydroplaning, even at relatively moderate speeds and with only small amounts of water on the road.
Tread wear indicators, refer to arrow, are embedded around the tire circum- ference in the base of the tire tread. Their locations are indicated on the tire sidewall with TWI Tread Wear Indi-
cator. 1.6 m tires h sible
steeri lead t the ve Avoid the pe excee heatin tires. the fo
135n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire condition Tire replacement
ction traction grades, from highest to est, are AA, A, B, and C. se grades represent the tire's ability top on wet pavement as measured er controlled conditions on speci- government test surfaces of halt and concrete. A tire marked C have poor traction performance.
The traction grade assigned to this tire is based on straight-
ad braking traction tests, and does include acceleration, cornering, roplaning, or peak traction charac- tics.<
-
e ire
Tra The low Tho to s und fied asp may
ahe not hyd teris
Re pa
ir s
Da ta
In de
x
as ire
di-
e r-
Proceed carefully to the nearest BMW Sports Activity Vehicle center or professional tire center, or have the vehicle towed in to have it, its wheels and tires inspected. Tire damage up to and including blow- outs can endanger the lives of both the vehicle occupants and other road users.<
DOT Quality Grades Tread wear Traction AA A B C Temperature A B C
All passenger car tires must con form to Federal Safety Require-
ments in addition to these grades.<
Tread wear The tread wear grade is a comparativ rating based on the wear rate of the t when tested under controlled condi- tions on a specified government test course. For example, a tire graded 150 would
136nTire replacement
ge recommends the replacement of s i.e. also of the spare tire, inde- ntly of actual wear when the re no more than 6 years old, even e life of 10 years is possible.
ate on which the tire was manu- ed is indicated by the code on the all: .. 2602 indicates that the tire was factured in week 26 of 2002.
Tire a BMW all tire pende tires a if a tir
The d factur sidew DOT . manu
Temperature The temperature grades are A, the highest, B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled condi- tions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive tem- perature can lead to a sudden flat tire. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Car Safety Standard No. 109.
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:
Tread wear 200 Traction AA Temperature A
Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
The temperature grade for this tire is established for a tire that is
properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible a tire failure.<
137n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
a
Wheel and tire combinations
rage re wheels or tires in a cool, dry e, protecting them against light never possible. Protect the tires inst contact with oil, grease and .
bi- c-
s
at f nt
nd
ch s re g
Sto Sto plac whe aga fuel
Da t
In de
x
The right choice Use only wheels and tires approved by BMW for the corre-
sponding vehicle model, as otherwise the tires may make contact with the body as the result of tolerances despite the same nominal size being used, resulting in serious accidents. If non- approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot be held liable for driving safety.<
BMW tests certain tire brands for each tire size, classifies them as road-safe and approves them. Consult your BMW Sports Activity Vehicle center for
The correct wheel and tire com nation affects different systems
such as ABS, ATC and DSC. The fun tion of these systems is impaired if improper wheel and tire combination are used. For this reason, use only tires of the same brand and tread pattern on the vehicle and, for example, restore the approved wheel and tire combination following a flat tire as soon as possible.<
The use of rims and lug bolts th do not meet the specifications o
the original factory-installed equipme will affect the safe operation of your
more information. Observe any regula- tions applicable in the country of use, e.g. requiring entry in the vehicle docu- ments.
vehicle and may cause an accident a personal injury. Never mix tires of different design, su as steel-belted radials with radial bia belted or bias-ply tires, etc. Mixing ti types will adversely affect roadholdin and can lead to loss of vehicle control.<
138nWinter tires Snow chains*
ertain snow chains have been by BMW and classified and ved as safe. Consult your BMW s Activity Vehicle center for s. The use of narrow-link BMW chains is approved only in pairs rear wheels and only with the ing tire sizes.
X5 4.6is: 255/55 R18 er models: 235/65 R 17.
ly with all manufacturer's safety utions when mounting the chains. t exceed a maximum speed of h/50 km/h.
Only c tested appro Sport detail snow on the follow
BMW All oth
Comp preca Do no 30 mp
Choosing the right tire BMW recommends winter tires M+S radial tires for operation under inclement winter driving conditions. While so-called all-season tires with M+S designation provide better winter traction than summer tires with the load ratings H, V, W, Y and ZR, they gener- ally do not achieve the performance of winter tires.
In the interests of safe tracking and steering response, install radial tires made by the same manufacturer and with the same tread configuration on all four wheels if you elect to mount winter tires.
Do not exceed specified maximum speeds
Never exceed the maximum speed for which the tires are rated.
Unprofessional attempts by laymen to service tires can lead to damage and accidents. Have this work performed by skilled professionals only. Your BMW Sports Activity Vehicle center will be glad to assist you with both their expertise and the proper equipment for your vehicle.<
Tire condition, tire pressure Winter tires display a perceptible loss in their ability to cope with winter driving
Comply with the specified tire inflation pressures and be sure to have the wheel and tire assemblies balanced every time you change the tires.
139n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Hood
close w the hood to fall from a height of ut 12 in/30 cm so that it audibly ages.
To Allo abo eng
5 3 0 d
e2 9 7
Re pa
ir s
Da ta
In de
x
To avoid injuries, be sure that the travel path of the hood is clear
n it is closed, as with all closing cedures. is determined that the hood is not pletely closed while driving, stop ediately and close it securely.<
whe pro If it com imm
To unlock Pull the lever located under the left- hand side of the instrument panel.
5 3 0 d
e2 9 5
To open Pull the release handle and open the hood.
5 3 0 d
e2 9 6
Do not work on your vehicle without appropriate skills. Failure
to work in an informed, professional manner when servicing components and materials constitutes a safety hazard for vehicle occupants and other road users. If you are not familiar with the guidelines, please have the opera- tions performed by your BMW Sports Activity Vehicle center.<
140nEngine compartment essentials
1
id under the 144
3 Auxiliary terminal for jump starting 162
4 Coolant expansion tank 143
5 Engine oil filler neck 141
ervoir for windshield and dlamp washer system 141
1 Engine oil dipstick 14
2 Reservoir for brake flu microfilter trim panel
5 3 0 d
e3 4 1
6 Res hea
141n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Washer fluid Engine oil
oil volume between the two marks he dipstick corresponds to approx. US quarts/1 liter. Do not fill beyond upper mark on the dipstick. Excess ill damage the engine
-
The on t 1.1 the oil w
5 3 0 u s2
0 5
Re pa
ir s
Da ta
In de
x
W X5 4.6is: e vehicle's performance reserves used extensively high-perfor- ce driving the oil level should be
ntained at the upper mark on the tick.
r
ay
n
s.
BM If th are man mai dips
Windshield and headlamp washer system Approximate capacity is 8.2 US quarts/ 7.8 liters.
5 3 0 d
e2 9 8
Checking oil level 1. Park the vehicle on a level surface 2. Switch the engine off after it has
reached normal operating tempera
5 3 0 u s1
0 0
Fill with water and if required with a washer antifreeze, according to manu- facturer's recommendations.
It is more convenient to mix the washer fluid before adding it to
the reservoir.<
Antifreeze agent for the washer systems is inflammable. For this
reason, keep it away from sources of flame and store it only in its original containers. Store it so that it is inacces- sible to children. Comply with the instructions on the containers.<
ture 3. After approx. 5 minutes, pull the
dipstick out and wipe it off with a clean lint-free cloth, paper towel, o similar material
4. Push the dipstick carefully all the w into the guide tube and pull it out again
5. The oil level should be in between the two marks on the dipstick.
As with fuel economy, oil consumptio is directly influenced by your driving style and vehicle operating condition
142nEngine oil
Ask your BMW Sports Activity Vehicle center for details rning the specific BMW High
rmance Synthetic Oil or synthetic hich have been approved.<
an also call BMW of North ica at 1-800-831-1117 or visit this ite: www.bmwusa.com to obtain formation.
sity ratings sity is the oil flow rating as estab- in SAE classes.
election of the correct SAE class ds on the climatic conditions in
conce Perfo oils w
You c Amer webs this in
Visco Visco lished
The s depen
ea where you typically drive your .
Approved oils are in SAE classes 5W-40 and 5W-30.<
oils may be used for driving in all nt temperatures.
the ar BMW
These ambie
To add oil While you should wait until the level has dropped to just above the lower mark before adding oil, you should never
5 3 0 d
e3 2 6
Continuous exposure to used oil has caused cancer in laboratory
testing. For this reason, any skin areas that come into contact with oil should be thoroughly washed with soap and water. Always store oils, grease and similar materials so that they are inaccessible to children. Comply with warning labels and information on containers.<
Comply with the applicable envi- ronmental laws regulating the
disposal of used oil.<
Specified engine oils
allow the oil level to fall below this marking.
BMW engines are designed to operate without oil additives; the
use of additives could lead to damage in some cases. This is also true for the manual transmission, the automatic transmission, the differential, and the power steering system.<
Recommendation: have the oil changed by your BMW Sports Activity Vehicle center.
The quality of the engine oil selected has critical significance for the opera- tion and service life of an engine. Based on extensive testing, BMW has approved only certain engine oils.
Use only approved BMW High Perfor- mance Synthetic Oil.
If you are unable to obtain BMW High Performance Synthetic Oil, you can add small amounts of synthetic oil in between oil changes. Use only oils with the API SH specification or higher.
143n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Coolant
necessary, add coolant. Slowly add oolant until the correct level is eached do not overfill.
Comply with the applicable envi- ronmental laws regulating the
osal of extended-duty antifreeze corrosion inhibitor.<
e
n- to
he
3. If c r
disp with
Da ta
In de
x
g, , to he p
Do not add coolant to the cooling system when the engine is hot. If
you attempt to do so, escaping coolant can cause burns. To avoid the possibility of damage later on, never use anything other than factory-approved, nitrite and amino- free extended-duty antifreeze with corrosion inhibitor. Your BMW Sports Activity Vehicle center is familiar with the factory specifications. Antifreeze and anticorrosion agents are hazardous to health. You should always store them in their original container and in a location which is inaccessible to children. Extended-duty antifreeze with corro-
Checking coolant level and adding coolant Correct coolant level when the engin is cold approx. +68 7/+20 6:
5 3 0 u s1
0 2
sion inhibitor contains the flammable substance ethylene-glycol. For this reason, do not spill antifreeze with corrosion inhibitor on hot engine parts. It could ignite and cause serious burns.<
1. Start by turning the cap of the expa sion tank counterclockwise. Pause allow any accumulated pressure to escape, then open
2. The coolant level is correct when t end of the red float is aligned with the upper edge of the filler openin refer to the arrow in the illustration or max. 0.8 in/2 cm higher, i. e. up the mark on the float, refer also to t schematic diagram, next to the ca
144nBrake fluid
,
Brake fluid level If the indicator lamp for the brake hydraulic system appears or if the CHECK BRAKE FLUID warning appears in the Check Control: the brake fluid level is too low.
Add brake fluid The brake fluid reservoir is located under the microfilter housing trim panel on the driver's side of the vehicle. For adding brake fluid or for determining and correcting the cause of brake fluid loss, consult your BMW Sports Activity Vehicle center. Your BMW Sports
Brake fluid is hygroscopic, that is it absorbs moisture from the air
over time. In order to ensure the safety and reli- ability of the brake system, have the brake fluid changed every two years by a BMW Sports Activity Vehicle center. Refer also to the Service and Warranty Information Booklet for US models or the Warranty and Service Guide Booklet for Canadian models. Brake fluid is toxic and damages the vehicle's paint. You should always store it in its original container and in a loca- tion which is out of reach of children. Do not spill the fluid and do not fill the
Activity Vehicle center is familiar with the specifications for factory-approved brake fluids DOT 4.
Brake fluid loss may result in extended brake pedal travel. For this situation, refer to the notes on page 132.
brake fluid reservoir beyond the MAX mark. The brake fluid could ignite upon contact with hot engine parts and cause serious burns.<
Comply with the applicable envi- ronmental laws regulating the
disposal of brake fluid.<
145n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
vice and Warranty Information klet US models/Warranty Service Guide Booklet adian models
additional information on mainte- ce intervals and procedures, please r to the Service and Warranty Infor- ion Booklet for US models or the rranty and Service Guide Booklet for adian models.
precaution against corrosion, it is isable to have the body checked for age from rocks or gravel at the e time, depending upon operating ditions.
The BMW Maintenance System
The BMW Maintenance System has been designed as a reliable means of providing maximum driving and oper- ating safety and as cost-effectively as possible for you.
3 9 0 u s0
0 8
Service Interval Display Conventional systems rely solely on distance traveled to determine when service is due. The BMW Maintenance System, on the other hand, began many years ago to take the actual conditions under which the vehicle is driven into consideration. After all, different drivers can accumulate mileage in very different ways.
From the point of view of maintenance, 62,000 miles/100,000 km accumulated in short-distance urban driving are not the equivalent of the same distance covered at moderate speeds in long- distance highway travel.
Re pa
ir s
Da ta
In de
x
Have your BMW Sports Activity Vehicle center do the mainte-
ce and repair. sure that all maintenance work is firmed in the Service and Warranty rmation Booklet for US models or Warranty and Service Guide klet for Canadian models. se entries will constitute your proof the vehicle has received regular ntenance. They are also required for ranty claims.<
care all information on this subject, refer he Caring for your vehicle manual.
Please keep in mind that regular main- tenance is not only necessary for the safety of your vehicle, but also plays a significant role in maintaining the resale value of the vehicle.
The BMW Maintenance System includes the Engine Oil Service and Inspections I and II.
Determining the maintenance intervals according to the actual loads on the vehicle covers every kind of operating situation. However, even those who drive only short distances significantly less than 6,000 miles/10,000 km annu- ally should have the engine oil changed at least every 2 years since oi deteriorates over time, regardless of use.
Ser Boo and Can For nan refe mat Wa Can
As a adv dam sam con
nan Be con Info the Boo The that
l mai war
Car For to t
146nTechnical modifications California Proposition 65 Warning
Light-emitting diodes LEDs Light-emitting diodes installed behind translucent lenses serve as the light source for many of the controls and dis- plays in your vehicle. The concept behind their operation is related to that employed for lasers.
Do not remove the protective lens and avoid staring directly at the
unfiltered beam for several hours, as inflammation of the iris could result.<
California laws require us to state the following warning:
Engine exhaust, some of its con- stituents, and certain vehicle com-
ponents contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Battery posts, terminals and related accessories contain lead and lead
147n
Ov er
vi ew
Co nt
ro ls
M ai
nt e-
OBD interface socket
When the filler cap is not properly tightened, the OBD system can
ct the vapor leak and the indicator light up. If the filler cap is subse- ntly tightened, the indicator should ut within a few days.<
ou
y
r er
s- a
s,
dete will que go o
Re pa
ir s
Da ta
In de
x
The interface socket for the Onboard Diagnostic is located on the left of the driver's side at the bottom of the instru- ment panel and under a cover. The cover has the letters OBD on it.
5 3 0 u s1
0 5
An illuminated lamp informs y of the need for service, not of the need to stop the vehicle.
However, the systems should be checked by your BMW Sports Activit Vehicle center at the earliest possible opportunity.
Under certain conditions, the indicato will blink or flash. This indicates a rath severe level of engine misfire. When this occurs, you should reduce speed and consult the nearest BMW Sports Activity Vehicle center as soon as po sible. Severe engine misfire over only short period of time can seriously damage emission control component especially the catalytic converter.
The purpose of the OBD system is to ensure proper operation of the emis- sion control system for the vehicle's lifetime. The system monitors emission- related components and systems for deterioration and malfunction.
Service Engine Soon warning lamp for Canadian models.
148n
149n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Repairs
150n
ld the wiper blade on the window remove/unclip the wiper arm at articulated joint, refer to arrow
Onboard tool kit Windshield wiper blades
Under the cargo area floor in a pocket.
5 3 0 u s1
0 6
Front 1. Move the wiper to a fold-out posi-
tion, refer to page 68 2. Lift the wiper arm and press the
5 3 0 d
e3 0 0
ert a new wiper blade and press it clip it into the wiper arm.
Use only wiper blades approved by BMW.<
securing spring, refer to arrow 3. Pull the wiper blade off toward the
wiper arm 4. Insert the new blade and snap it into
place.
Fold the wipers back down onto the windshield before you turn the
ignition key to position 1 or 2 again. If you do not, they could be damaged.<
Rear 1. Ho
and the
5 3 0 d
e3 0 1
2. Ins on/
151n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
urn the bulb holder to the left, refer arrow, and remove emove and replace the bulb.
h beams bulb, 60 watts
The bulb is pressurized. There- fore, wear safety glasses and
tective gloves. Failure to comply this precaution could lead to injury e bulb is accidentally damaged ing replacement.<
urn the bulb holder to the left and emove isconnect the plug
1. T to
2. R
Hig HB3
pro with if th dur
1. T r
2. D
Re pa
ir s
Da ta
In de
x
lug the new bulb into the plug onnector. Be sure that it is securely ngaged stall in the opposite order.
d-
ry
3. P c e
4. In
The lamps and bulbs make essential contributions to the safety of your vehicle. For this reason, follow the instructions below carefully when replacing a bulb. If you are not familiar with any of the procedures, consult your BMW Sports Activity Vehicle center.
Do not touch the glass portion of a new bulb with your bare hands
since even small amounts of impurities burn into the surface and reduce the service life of the bulb. Use a clean cloth, paper napkin, or a similar mate- rial, or hold the bulb by its metallic base.<
The right side of the engine compart- ment.
1 Low beams
2 High beams 5 3 0 d
e3 0 2
A replacement bulb set is available from your BMW Sports Activity Vehicle center.
Whenever working on the elec- trical system, switch off the elec-
trical accessory you are working on or disconnect the cable from the negative terminal of the battery. Failure to do this could result in short circuits. Comply with any instructions provided by the bulb manufacturer. If you do not, injuries and damages during the bulb replacement can occur.<
For checking and adjusting hea lamp aim, please contact your
BMW Sports Activity Vehicle center.<
Low beams H7 bulb, 55 watts
The bulb is pressurized. There- fore, wear safety glasses and
protective gloves. Failure to comply with this precaution could lead to inju if the bulb is accidentally damaged during replacement.<
152nLamps and bulbs
t fog lamps lb, 55 watts
The bulb is pressurized. There-
Fron H3 bu
5 3 0 d
e3 4 4
fore, wear safety glasses and ctive gloves. Failure to comply his precaution could lead to injury bulb is accidentally damaged replacement.<
l the cover in front of the fog lamp ard sen the two screws, refer to ws, and remove the fog lamp
n the cover cap on the rear of the lamp to the left and remove hook the wire clamp, remove the tact base and replace the bulb.
prote with t if the during
1. Pul forw
2. Loo arro
3. Tur fog
4. Un con
Xenon lamps* The operating life of these lamp units is extremely long and the likelihood of failure very low, provided that they are not switched on and off a very great number of times. If one of these bulbs should nevertheless fail, it is possible to continue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this.
Because of the extremely high voltages involved, any work on the
xenon lighting system should be carried out by technically-qualified personnel only. Failure to comply with this creates
Side turn signal indicators 5 watt bulb
1. Use finger pressure against the rear
5 3 0 d
e3 0 4
a risk of fatal injury.<
Turn signal indicators/Standing lamps side marker lamps front Dual-filament bulb, 28/8 watts
Please contact a BMW Sports Activity Vehicle center in case of a malfunction.
end of the lamp, refer to arrow, to press it forward for removal
2. Press gently on the bulb and turn it to the left to remove it
3. Replace the bulb.
153n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
ps in the tailgate:
nclip the trim panel in the tailgate ith a screwdriver ress gently on the bulb holder and
Lam
1. U w
2. P
5 3 0 d
e3 0 6
Re pa
ir s
Da ta
In de
x
rn it to the left to remove it emove the bulb.
ter high-mount brake lamp strip in the rear spoiler: please tact a BMW Sports Activity Vehicle ter in case of a malfunction.
tu 3. R
Cen LED con cen
Tail lamp assembly Tail lamp 2: 21/5 watt bulb Remaining bulbs: 21 watts
1 Turn signal indicator
5 3 0 d
e2 1 2
Lamps in the side panel:
1. Open the cover in the side panel 2. Lift the side panel if necessary 3. Press gently on the bulb holder an
5 3 0 d
e3 0 5
2 Rear lamps/Side marker lamps
3 Backup lamps
4 Brake lamps
5 Reflector
turn it to the left to remove it 4. Remove the bulb.
154nLamps and bulbs Changing a wheel
on the jack on a firm support e. t place wooden blocks or similar ts under the jack. If this is done, ck might not be able to reach its pport capacity because of the d height. t lie under the vehicle or start the e when the vehicle is supported jack. Failure to comply with this s a risk of fatal injury.<
Positi surfac Do no objec the ja full su limite Do no engin by the create
License plate lamps 5 watt bulb
1. Press the lamp out to the side with a
5 3 0 d
e3 0 7
Safety precautions in the event of a flat tire or wheel change:
Stop the vehicle as far as possible from passing traffic. Park on a firm flat, sur- face. Switch on the hazard warning flashers. Turn the steering wheel to the straight- ahead position, remove the key and engage the steering lock. Shift into 1st or reverse, selector lever in Park with automatic transmission, and engage the parking brake. All passengers should be outside the vehicle and well away from your imme- diate working area, behind a guardrail, for instance.
screwdriver 2. Remove the lamp and replace the
bulb.
If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations. Change the wheel only on a level, firm surface which is not slippery. Avoid jacking the vehicle up on a soft or slip- pery surface, snow, ice, very smooth surfaces, etc., since it could slide side- ways.
155n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Changing a wheel
andle for the jack emove from its holder
>H R
5 3 0 d
e2 1 3
Re pa
ir s
Da ta
In de
x
What you will need In order to avoid rattling noises later, note the position of the tools when you remove them and return them to their
5 3 0 u s1
1 7
>Lug wrench Is located next to the spare wheel
5 3 0 u s1
2 0
original position when you are through using them.
>Two wedges wheel chocks Open the liftgate and tailgate. In the cargo area, fold up the floor cover or pull-out cargo floor, refer to pages 123, 124 or 125. Take out the wedges, refer to arrow, next to the spare wheel
156nChanging a wheel
oval aid for the spare wheel ing this device, you do not have to spare wheel out of the recess by
Rem By us lift the hand.
5 3 0 d
e3 1 0
k is to help you to move the wheel he tailgate, from where you can lift it off.
se the tailgate again sp the handle of the removal aid ind the spare wheel with both ds and pull upward over the
gate, refer to arrow
Its tas onto t easily
1. Clo 2. Gra
beh han tail
>Jack Remove the rubber band from the holder, refer to arrow, and take out the jack.
5 3 0 d
e3 3 3
Spare wheel 1. Loosen the wing nut 1 2. Remove the plate 2 to the side 3. Unscrew the threaded rod 3
5 3 0 u s1
1 8
When you have completed work, screw the jack all the way back down, remove the handle and insert it into its holder.
completely.
157n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Changing a wheel
ress the tailgate down and hold it ere. The spare wheel is now pulled y means of the removal aid onto the ilgate
5. P th b ta
5 3 0 d
e3 1 3
Re pa
ir s
Da ta
In de
x
Hold the tailgate in the opened position and do not allow it to
act sharply upward. If you do so, e is a risk of personal injury and icle damage.<
retr ther veh
3. Hook both buckles into the latch of the tailgate, refer to arrow; the tail- gate is released
5 3 0 d
e3 1 1
4. Remove the support rod from the bracket
5 3 0 d
e3 1 2
158nChanging a wheel
ition the jack at the jacking point sest to the flat tire so that the jack e is vertically below the jacking nt and the entire surface of the
- 5. Pos clo bas poi
5 3 0 d
e2 3 6
d of the jack will move into the are recess of the jacking point, r to the illustration detail, when
jack is cranked k the vehicle up until the wheel are changing is raised from the und screw the lug bolts and remove wheel move accumulations of mud or from the mounting surfaces of wheel and hub. Clean the lug ts
hea squ refe the
6. Jac you gro
7. Un the
8. Re dirt the bol
6. Insert the support rod in the tailgate lock and press down until it engages, refer to arrow 1; then lock hook of rod in striker, refer to arrow 2
5 3 0 d
e3 1 4
Procedure 1. Read carefully and comply with the
safety precautions on page 154 2. Secure the vehicle to prevent it from
rolling: Place the wedges (chocks) behind the wheels on the side opposite the side you are lifting. If the vehicle is parked on a downward slope, place the wedges securely in front of the wheels. If the wheel must be changed on a surface with a more severe slope, take additional precau tions to secure the vehicle from rolling
3. Loosen the lug bolts 1/2-turn
Be sure that the support rod is locked firmly in place. If you fail to
do so, it could retract sharply upward and cause personal injury and vehicle damage.<
7. You can now release the locked tail- gate and take the spare wheel down from the tailgate. It is recommended that you leave the tailgate locked into place until you have completed the wheel change and placed the wheel with the defective tire into the removal aid.
4. Insert the jack handle into the jack, refer to the illustration in the next column
159n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Changing a wheel
ht-alloy wheels other than original W light-alloy wheels have been nted, it may be necessary to use rent lug bolts for those wheels.
lace the defective tire as soon as sible and have the new wheel/tire nced.
ving with spare wheel With certain wheel-and-tire com- binations the size of the spare
el differs from that of the other els. The spare wheel is equivalent
hese in all speed and load ranges. ever, to restore the original state,
normal wheel should be remounted
el .
th ci-
d,
If lig BM mou diffe
Rep pos bala
Dri
whe whe to t How the
Re pa
ir s
Da ta
In de
x
oon as possible. en the spare wheel is mounted, the imum speed rating is 130 mph/ km/h.<
ld r-
ail- ly
as s Wh max 210
9. Position the spare wheel. Secure the wheel by turning at least two lug bolts into opposite bolt holes
10. Screw in the remaining lug bolts. Tighten all the bolts securely
11. Lower the jack and remove it from beneath the vehicle
12. Tighten the lug bolts in a diagonal pattern
13. Check and correct the tire inflation pressure at the earliest opportunity. Vehicles with Tire Pressure Monitor RDC*: After mounting the spare wheel or correcting the tire inflation pres- sure, reactivate the system, refer to page 97.
The vehicle jack is designed for changing wheels only. Do not
attempt to raise another vehicle mod with it or to raise any load of any kind To do so could cause accidents and personal injury. To ensure continued safety, have the tightness of the lug bolts checked wi a calibrated lug wrench torque spe fication: 101 lb-ft/140 Nm at the earliest opportunity.<
Store the wheel and the tools in the order opposite that for removal.
Before removing the support ro be sure that the tailgate is held
Protect valve stems and valves from dirt using screw-on valve stem caps. Dirt in the valve stems frequently leads to slow leaks.
down firmly. If you fail to do so, it cou retract sharply upward and cause pe sonal injury and vehicle damage. After you remove the rod, close the t gate carefully. Continue to hold it firm until it is completely closed.<
160nBattery Fuses
glove compartment the glove compartment and turn o quick-release fasteners to the
,
In the Open the tw left.
5 3 0 u s1
2 1
Battery posts, terminals and related accessories contain lead
and lead compounds. Wash hands after handling.<
Maintenance The battery is maintenance-free, that is, the original electrolyte will normally last for the service life of the battery under moderate climatic conditions.
For all questions that regard the battery, please consult your
BMW Sports Activity Vehicle center. Since the battery is maintenance-free, the following is for your information
Charging the battery Charge the battery in the vehicle only when the engine is not running. Use the connections provided in the engine compartment. For correct connections refer to Jump-starting on page 162.
Disposal Return used batteries to a recyc- ling point or your BMW Sports
Activity Vehicle center. Maintain the battery in an upright position for trans- port and storage. Secure the battery against tilting during transport.<
only.<
Do not disconnect the battery when the engine is running. If
you do so, the ensuing voltage surge will damage the vehicle's onboard elec- tronics.<
161n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Fuses
Re pa
ir s
Da ta
In de
x
In the cargo area Open the right cover by pulling the handle.
Do not attempt to repair a burned
5 3 0 u s1
2 2
fuse or replace it with a fuse having a different color or ampere rating. To do this could cause a fire in the vehicle resulting from a circuit over- load.<
162n
so-called jump start auxiliary ter- al in the engine compartment of r BMW acts as the positive bat- terminal. The cap of this jump
Jump-starting
When your battery is discharged you can used two jumper cables to start your vehicle with power from the bat- tery in a second vehicle. You can also use the same method to help start another vehicle. Always use jumper cables with fully insulated handles on the terminal clamps.
Do not touch the live parts while the engine is running. Failure to
comply with this creates a risk of fatal injury. Carefully observe the following instructions to avoid personal injury and/or damage to one or both vehi- cles.<
1. Make sure, that the battery on the support vehicle is rated at 12 volts. This information is provided on the battery label
2. Switch off the engine of the support vehicle. Switch off all electrical accessories in both vehicles except the hazard warning flashers of the support vehicle
3. Make absolutely certain that there is no contact between the bodywork of the two vehicles risk of short circuit
rt auxiliary terminal is identified by symbol. To open, tip up the cap, r to arrow. t connect a jump start cable to positive terminal of the dis- rged battery, and the other end to positive terminal of the support icle
4. The min you tery
5 3 0 d
e3 2 5
sta a + refe Firs the cha the veh
163n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Jump-starting
it
w ry
s
Re pa
ir s
Da ta
In de
x
o
5. With the second jumper cable, con- nect the negative terminals of the two vehicles. First connect the cable to the support vehicle's negative bat- tery terminal or a suitable ground on
5 3 0 u s1
2 7
6. Start the support vehicle's engine and let it run at an increased idling speed for a few minutes
7. Start the engine on the vehicle needing the jump-start, and allow to run as usual. If the first start attempt is not successful, wait a fe minutes before another attempt in order to allow the discharged batte to recharge
8. Before disconnecting the jumper cables let the engines run for a few minutes
9. Then disconnect the jumper cable in reverse sequence.
Depending on the cause of the fault, have the battery recharged by your
its engine or bodywork, and then the other end to the negative battery ter- minal or a suitable ground on the engine or bodywork of the vehicle being started. There is a special nut for this purpose on the left side panel of your BMW, refer to the arrow in the illustration
Always adhere to this sequence when connecting jumper cables;
failure to observe this procedure can lead to sparks at the battery terminals and pose an injury hazard.<
BMW Sports Activity Vehicle center.
Do not use spray starter fluids t start the engine.<
164nTowing the vehicle
Avoid off-center towing. Be sure that the tow rope is pulled tightly the towing vehicle begins to .<
Do not tow a vehicle heavier than your own. If you do, it is no longer ble to control vehicle response.<
starting ot possible to start the engine of a le equipped with an automatic
ission by towing or pushing.
structions on Jump starting refer e 162.
when move
possi
Tow- It is n vehic transm
For in to pag
attempt to use your vehicle to another vehicle. If you do so, ge to the energy-absorbing ers could result.
-
Never push dama bump
Tow fitting The screw-in tow fitting is stored beneath the cargo area floor. Carry it with you at all times. This fitting is
5 3 0 u s1
2 8
Rear: Pull the cover off.
Screw the tow fitting in until it is 5 3 0 d
e3 1 8
designed for installation in the tow sockets located at the front and rear of the vehicle, and is intended for towing on paved road surfaces only. It should not be used to pull a vehicle out of deep snow, mud, sand, etc. Always observe all applicable towing laws and regulations.
Access to tow sockets Front: Use a screwdriver to press the right or left cover out, refer to arrows.
tight. If you do not, the threads could be damaged. Do not tow the vehicle by any compo- nents of the running gear, or lash them down in any way. If you do so, the com ponents could be damaged, leading to possible accidents.<
Use only a nylon towing strap to tow the vehicle, since the inherent resil- ience of this material helps protect both vehicles from sudden jerking move- ments.
165n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Towing the vehicle
ing with a raised axle lace the gearshift lever or selector ver in Neutral urn the ignition key to position 0 or emove it owing speed: aximum 30 mph/50 km/h
owing distance: aximum 95 miles/150 km.
Remove the rear driveshaft for longer towing distances with the
t axle lifted; remove the front drive- ft for towing over longer distances the rear axle lifted. Failure to ply with this will result in damage to transfer box.<
nt
Tow 1. P
le 2. T
r 3. T
M 4. T
M
fron sha with com the
Re pa
ir s
Da ta
In de
x
ng
in <
Towing a vehicle with automatic transmission 1. Place the selector lever in position N 2. Towing speed:
Maximum 45 mph/70 km/h 3. Towing distance:
Maximum 95 miles/150 km 4. Turn the ignition key to position 1 to
ensure that the brake lamps, turn signal indicators, horn and wind- shield wipers remain operative, and to prevent the steering lock from engaging
5. Switch on the hazard warning flashers, comply with country-spe- cific regulations.
Towing with a commercial tow truck >Do not tow with sling-type equipme >Use a wheel-lift or flatbed carrier
5 3 0 u s1
3 8
In the event of electrical malfunction, find some means of identifying the vehicle in tow, for instance, place a sign or warning triangle in the rear window.
Make sure that the ignition key remains in position 1 even when
the electrical system has failed. This will prevent the steering lock from engaging. The steering and brakes are without power assist when the engine is not running. This means that increased effort is required for steering and braking.<
>Please comply with applicable towi laws.
Never allow passengers to ride a towed vehicle for any reason.
166n
167n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Index
Technical data
Owner service procedures
In
Index
168n
i BMW X5 4.6is
281.9/4,619 8
340 5,700
350/475 3,700
10.5
3.35/85.0 3.66/93.0
-management system
Engine specifications
An engine performance test is authorized only on an appropriate chassis dynamom
BMW X5 3.0i BMW X
Displacement Number of cylinders
cu in/cm3 181.8/2,979 6
268.4/ 8
Maximum output at engine speed
hp rpm
225 5,900
290 5,400
Maximum torque at engine speed
Ib-ft/Nm rpm
214/290 3,500
324/44 3,600
Compression ratio 10.2 10.0
Stroke Bore
in/mm in/mm
3.53/89.6 3.31/84
3.26/8 3.62/9
Fuel-injection system Digital electronic e
eter.
5 4.4
4,398
0
2.7 2.0
ngine
169n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Dimensions
; without level control system: .5/1,740; without level control ,566, rear 62.8/1,596.
8 1
.7 /2
.0 7
6
.2/1,707 tem: 68 t 61.7/1
ters
2,180
1,560
5 3 0 d
e2 1 0
5 3 0 d
e3 3 9
All dimensions are given in inch/mm. Height: with level control system: 67 67.5/ 1,715. Height with roof-mounted luggage rack: with level control sys
system: 68.8/1,748. Track width X5 3.0i: 62.0/1,576; X5 4.6is: fron Min. turning circle dia.: 39.7 ft/12.1 me
73.7/1,872 85.8/
61.4/1,560 61.4/
111/2,820
184/4,667
6 7
.2 /1
,7 0
7
170nWeights
4.4i BMW X5 4.6is
188 4,824/2,188
724 6,005/2,724
264 2,787/1,264
500 3,307/1,500
0/100
,540 according to DIN according to SAE
BMW X5
included 4,824/2,
6,005/2,
2,787/1,
3,307/1,
22
/465 1 /1,955
BMW X5 3.0i
Curb weight with one person, ready for operation, full tank of fuel, options not with manual transmission with automatic transmission
Ibs/kg Ibs/kg
4,533/2,056 4,586/2,080
Approved gross vehicle weight with manual transmission with automatic transmission
Ibs/kg Ibs/kg
6,005/2,724 6,005/2,724
Approved front axle load Ibs/kg 2,787/1,264
Approved rear axle load Ibs/kg 3,307/1,500
Approved roof load capacity Ibs/kg Never exceed either the approved axle loads or the gross vehicle weight.
Cargo area capacity cu ft/l 16.4 54.4 69.04
171n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Capacities
Notes
Fuel specification: page 26
For details: page 141
For details: page 143
BMW High Performance Synthetic Oil For details: page 142
Lifetime fluid, no fluid change required
, 4.6is
.6is
Fuel tank Reserve
gal./liters gal./liters
approx. 24.6/approx. 93 approx. 2.0/approx. 8 BMW X5 3.0i approx. 2.5/approx. 10 BMW X5 4.4i, 4.6is
Windshield washer system with headlamp washer system
quarts/liters approx. 8.2/approx. 7.8
Cooling system including heater circuit
quarts/liters 11.1/10.5 BMW X5 3.0i 13.7/13.0 BMW X5 4.4i
Engine oil and filter change quarts/liters 8.0/7.5 BMW X5 3.0i 8.5/8.0 BMW X5 4.4i, 4
Manual and automatic transmission, transfer box and differential
172n
173n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Index
Everything from A to Z
153
tor
0
6
Brake system 132 brake fluid 144 brake fluid level 133 brake pads indicator 21 disc brakes 133 hydraulic system indicator 19 malfunctions 132
Break-in procedures 130 Bulbs and lamps 151
C
A ABS Antilock Brake
System 20, 132 Accessories 9 Activated-charcoal
filter 110 Adaptive brake light 98 Adding
brake fluid 144 coolant 143 engine oil 141 washer fluid 141
Arrival time 87 Ashtray
front 117 rear 118
AUC Automatic recirculated- air control 108
Automatic climate control 105 removing condensation from the windows 107
Automatic cruise control 71 Automatic curb monitor 51
B Backup lamps 65
bulb replacement Battery 160
charge 160 discharged 163
Battery charge indica lamp 19
Battery, disposal 16 Belts 49 Beverage holder 11 Blower 103, 107
6 nce
153
California Proposition 65 Warning 146
Can holder, refer to beverage holder 116
Capacities 171 Cargo area 38, 120
capacity 170 cover 120 lamps 101 partition net 122
Cargo floor, pull-out 124 Cargo loading 126
Adjusting head restraints 47 mirrors 53 seats 44 steering wheel 52 thigh support 45
Air conditioner 102 Air distribution 103, 107 Air outlets 102, 105 Air supply 103, 107 Airbags 20, 55 Alarm system 39
Automatic dimming exterior rearview mirrors 54 interior rearview mirror 54
Automatic headlamp control 99
Automatic recirculated-air control AUC 108
Automatic steering wheel adjustment 52
Automatic transmission with Steptronic 65
BMW comfort seat 4 BMW High Performa
Synthetic Oil 142 BMW Maintenance
System 145 BMW sports seat 45 BMW Universal
Transmitter 112 Brake fluid 144 Brake fluid level 144 Brake lamps
bulb replacement
ABS 20, 13 Anti-theft syst Approved gros
weight 170 Aquaplaning
98 Cellular phone 116 hands-free system 116
Center high-mount brake lamp 153
Center (high-mount) brake lamp 153
3 System 2 em 31 s vehicle
132, 134
Average fuel consumption 80
Average speed 80, 88 Avoiding unintentional
alarms 40 Axle loads 170
Brake light, adaptive
Everything from A to Z 175n
Ov er
vi ew
Co nt
ro ls
nc e
terior 2, 40
07
Owner's nboard
l 142
Drink holder, refer to beverage holder 116
Driving notes 132 Driving through water 131 Driving with spare
wheel 159 Driving your BMW X5 131 DSC Dynamic Stability
Control 21, 91 Dynamic Brake Control
DBC 21, 92 Dynamic Stability Control
DSC 21, 91
Central locking system 30 button 35
Changing a wheel 155 CHECK button 77 Check Control 77 Check tire pressures 26 Checking
engine oil level 142 Child-safety locks 60 Cigarette lighter
front 117 rear 118 socket 118
Configuring individual settings via Vehicle and Key Memory 61
Consumption, fuel 87 Convenience operation of
windows and sliding/tilt sunroof 34
Convenience starting feature 63
Coolant 143 temperature gauge 76
Copyright notice 4 Correct sitting posture 44
Deactivating the in motion sensor 3
Deep water 131 Defrosting the
windows 104, 1 Digital clock 82
refer also to the Manual for the O Computer
Dimensions 169 Dipstick, engine oi Disc brakes 133 Displacement 168
M ai
nt en
a Re
pa ir
s
0 7, 18
60
160
90 est 120
E Electric power windows 40 Electrical malfunction
liftgate 36 sliding/tilt sunroof 43 tailgate 38
Elements of operation 14 Emergency operation
doors 34 liftgate 36 sliding/tilt sunroof 43
Clean the windshield 69 Climate control in the rear
passenger area 109 Clock 82
refer also to the Owner's Manual for the Onboard Computer
Cockpit 14 Code 88
activating 88 deactivating 88 selecting 88
seat adjustment 44 Cruise control 71 Cruising range 80, 87 Cup holder 116 Curb weight 170
D Data link connector for On-
board Diagnostics 147 Date
calling up 82 changing 82
Display lighting 10 Displays 15, 16, 1 Disposal
used batteries 1 used oil 142
Disposal of battery Distance from
destination 86 Distance warning Divided rear backr Door keys 30 Doors
Da ta
In de
x
ration 34 34
2 cking 34 s 135
tailgate 38 Energy control 74 Engine
output 168 power rating 168 specifications 168
Comfort seat 46 Compartments 116 Computer 80, 81, 85
refer also to the Owner's Manual for the Onboard Computer remote control 89
refer also to the Owner's Manual for the Onboard Computer
Daytime driving lamp 99 DBC Dynamic Brake
Control 21, 92
convenience ope manual operation remote control 3 unlocking and lo
DOT Quality Grade
Everything from A to Z
E
E E
E E E
F F
F
F F
F F F
F F F F F
el 53
5 d 109
I Ice warning 73 Identification, tires 137 Ignition key 30 Ignition lock 62 Imprint 4 Independent ventilation
system 84, 111 switching on and off 84
Indicator lamps 19 Inflation pressures,
tires 134
ngine compartment essentials 140
ngine coolant 143 ngine oil 141, 142 consumption 141 grades 142 level 20 pressure 19
stimated time of arrival 87 xterior mirrors 53 xterior rearview mirrors, automatic dimming
Frost protection, radiator 143
Fuel 26 capacity 171 display 75 gauge 75 quality 26 specifications 26
Fuel consumption 87 average 87
Fuel filler door 24 electrical malfunction 24
Head restraints 47 Headlamp flasher 68 Headlamp washer
system 69, 141 Heated seats 51 Heated steering whe Heating and
ventilation 102, 10 Heating while stoppe Heavy cargo 126 Height 169 Height adjustment
a
i
i i
l l o
o o r r r
151 mp 153
r to 16
stant
monitoring 97 INSPECTION 76 Instrument
cluster 15, 16, 17, 18 Instrument lighting 100 Instrument
panel 15, 16, 17, 18 Intensive cleaning
system 69 Interior lamps 101
remote control 32 Interior mirrors 54
feature 54
ilure of an electrical accessory 160 lling the windshield washer reservoir 141 rst-aid kit 24 ttings, tow-starting and towing 164 ashlight 115 at tire 98, 134, 155
Fuses 160
G Garage-door opener 112 Gasoline 26 General driving notes 132 Glasses compartment 117 Glove compartment 115 Gross vehicle weight 170 Ground clearance 131
H
seats 46 steering wheel 52
High beams 22, 100 bulb replacement
High-mount brake la Hill Descent Control
HDC 93 Holder for cans, refe
beverage holder 1 Hood 139 Hood release 139 Hydraulic Brake Assi
g lamps bulb rep lding rea otbrake ont area ont fog l ont seat
34 Interior motion sensor 40 Interior rearview mirror,
automatic dimming feature 54
Interlock 62 Intermittent wipe 68
100 lacement 152 r backrest 120 133
lighting 101 amps 100 adjustment 44
Handbrake 64 Hands-free system 116 Hazard warning flashers 14 Hazard warning triangle 24 HDC Hill Descent
Control 93
refer to DBC 21 Hydroplaning 132, 1
Everything from A to Z 177n
Ov er
vi ew
Co nt
ro ls
nc e
ion
3
7
ns, 3
Oil change interval, refer to the Service and Warranty Information Booklet for US models or to the Warranty and Service Guide Booklet for Canadian models
Oil level 20 indicator lamp 20
Oil pressure, indicator lamp 19
OILSERVICE 76 Onboard computer, refer to
the separate Owner's
J Jack 155, 156, 158 Jump-starting 162
K Key Memory 61 Keys 30 Keys with radio remote
control 30 Kickdown mode 66
L
Louvers 102, 105 Low beams 99
automatic 99 bulb replacement 151
Low-fuel warning lamp 75 Lug bolts 158 Lug wrench 155 Luggage net 38 Luggage straps 38 Lumbar support 46
M
MID Multi-Informat Display 81 digital clock 82
Mirror defrosting 5 Mirror memory 50 Mirrors 53 Modifications,
technical 9, 146 Monitoring inflation
pressure, tires 9 Moonroof 42 Multifunction butto
steering wheel 2
M ai
nt en
a Re
pa ir
s
isplay
, refer to ner's
ket 147
Manual Onboard Diagnostic
system 147 Onboard tool kit 150 Opening and closing
from the inside 35 from the outside 34 using the key 34 using the remote control 31
Outlets, ventilation 102, 105 Outside temperature
Lamps and bulbs 151 Lashing eyes 38, 126 LATCH Lower Anchors and
Tethers for CHildren child-restraint system 60
Lead-free gasoline 26 Length 169 License plate lamps
bulb replacement 154 Liftgate 36
opening from the inside 36
M+S radial tires 138 Maintenance 76, 145 Maintenance System 145 Malfunction displays 77 Manual operation
doors 34 fuel filler door 24 liftgate 36 sliding/tilt sunroof 43 tailgate 38
Manual transmission 64 Master key 30 Maximum cooling 108
Multi-Information D MID 81 digital clock 82
N Navigation system
the separate Ow Manual
O OBD interface soc Odometer 73
Da ta
In de
x
2
ge 75
display 73 in the computer 80
release following an electrical malfunction 36, 38 remote control operation 32
Lighter 117 LIGHTS ON warning 99 Load-securing devices 126
Mechanical seat 45 Memory 50
driver's seat 50 mirrors 50 steering wheel 50
Messages concerning system malfunctions 77
Oil additives 142 consumption 14 dipstick 142 grades 142 temperature gau
Everything from A to Z
P Park Dis
PDC Parking Parking Parking Particle Passen
functi PDC Pa
Contr
emo 83
pare
tion
143
Safety defects, reporting 10 Safety lock buttons 35 Seat adjustment 44 Seat belts 49 Seat, electric power 46 Seat heating 51 Seat, mechanical 45 Seat memory 50 Seat, mirror and steering
wheel memory 50 Securing cargo 38, 126 Selector lever, automatic
tance Control 90 aid 90 brake 20, 64 lamps 99 filter 104, 110 ger side mirror tilt on 51 rk Distance ol 90 fasten safety belts
R Rain sensor 68 RDC Tire Pressure
Monitor 97 warning lamp 19, 21
Rear backrests, folding down 120
Rear lamps 153 Rear passenger area climate
control 109 Rear seats, power 48 Rear window
Reminder signal M Remote control 31
computer 89 Removal aid for the s
wheel 156 Removing condensa
from the windows 104, 107
Replacing antifreeze, radiator bulbs 151 fuses 160
cts 10
09
1 70
ge
transmission 66 Self-leveling
suspension 94, 131 inactive 94 warning lamp 21
Service and Warranty Information Booklet for US models 145
Service Engine Soon indicator lamp 21
Service Interval Display 76, 145
Please warning lamp 20
Poor driving conditions 131 Power loss
sliding/tilt sunroof 43 Power outlets
flashlight 124 other appliances 124 vacuum cleaner 124
Power rating 168 Power rear-seat
backrests 48 Power seat 46
defroster 103, 108 Rear window wiper 70
blade replacement 150 Rear-seat backrest, folding
down 120 Rear-seat backrests,
power 48 Rearview mirrors
exterior 53 interior 54
Rechargeable flashlight 115 Recirculated-air
windshield wiper blades 150
Reporting safety defe Reservoir, washer
system 141 Residual heat 106, 1 Reverse 65 Rims 137 Roller sun blinds 11 Roof load capacity 1 Roof-mounted lugga
rack 127
44
4
49
Set temperature 107 Shiftlock 66 Shoulder support 47 Side airbags 55 Side Impact Head Protection
System 55
Power windows 40 safety switch 41
Pull-out cargo floor 124
mode 103, 108 Reclining seat 44 Refueling 24, 181 Releasing
hood 139 tailgate following an electrical malfunction 38
S Safe seating position
with airbags 44 with safety belts 4
Safety belts 49 height adjustment
Everything from A to Z 179n
Ov er
vi ew
Co nt
ro ls
nc e
t 153
an ction 38
Time calling up 82 changing 82 of arrival, estimated 87
Timer refer to Stopwatch refer also to the Owner's Manual for the Onboard Computer
Tire 134 damage 134 pressure monitoring 97 replacement 135
Side lamps 99 bulb replacement 152
Sitting safely with airbags 44
Sitting safely with safety belts 44
Ski bag 119 Sliding/tilt sunroof 42
closing following an electrical malfunction 43 convenience operation 34 power loss 43 remote control 32
Sports seat 45 Standing lamps 100 Starting assistance 163 Starting problems 63, 163 Starting the engine 62, 63 Steering lock 62 Steering wheel
adjustment 52 adjustment, automatic 52 heating 53 lock 62 memory 50
Steering wheel with
T Tachometer 74 Tail lamps 153
bulb replacemen Tailgate 37
opening from the outside 36 release following electrical malfun remote control operation 32
Tank capacity 171
M ai
nt en
a Re
pa ir
s
Sno Soc
p va
Spa Spa Spa
re Spa Spe Spe
Sp Sp Sp Sp Sp
146 tion 116 y,
80 e 75, 76
9 g 107
53
tread 134 Tire condition 134 Tire inflation
pressures 26, 134 monitoring 97 table 27
Tire Pressure Monitor RDC 97 warning lamp 19, 21
Tire Quality Grading 136 Tools 150 Torque 168
w chains 138 ket ower supplies 118 cuum cleaner 118 re key 30 re tire 156 re wheel 156 moval aid 156 re wheel, driving 159 aker 116 cial features of winter
res 138
multifunction buttons 23 Steptronic 65 Stopwatch 83 Storage compartments 116
in the cargo area 123 Summer tires 137 Sunroof 42 Sunshades 111 Switching off the engine 63 Switch-on times
input 84 Symbols 8
Technical modifications 9,
Telephone prepara Temperature displa
outside temperature 73,
Temperature gaug Temperature
layering 104, 10 Temperature settin Thigh support
adjustment 45 Third brake lamp 1
Da ta
In de
x
0 nger side
Tow fittings 164 Towing the vehicle 164 Tow-starting 164 Track width 169
ti ecial wash program 69 eed 88 eed control 71 eed limit 85, 86 eedometer 15, 17, 18
Synthetic oils 142 System malfunction
indicators 77
Tilt alarm 32 Tilt alarm sensor 4 Tilt function, passe
mirror 51
Everything from A to Z
Tractio refer
Transm Transp
safely Tread d Trip od Turn sig
bulb Turning Two-ax
sus disp low rais
U Unifor
Gra Unive Used
disp Used
5
7
tion 34
n Control System, to DSC 91 ission 64, 65 orting children
58 epth, tires 134 ometer 73 nal indicator 68
replacement 152 circle 169 le self-leveling nsion 94
Valve caps 159 Variable Ride Height 94 Vehicle battery 160 Vehicle jack 155 Vehicle keys 30 Vehicle Memory 61 Vehicle vacuum cleaner
power outlet 124 socket 118
Ventilation 102, 104, 109 draft-free 104, 109 in the rear 104, 109
Wheel and tire combinations 137
Wheel, changing 15 Wheelbase 169 Wheels and tires 13 Width 169 Windows 40
convenience opera remote control 32
Windshield intensive cleaning program 68
am 68
1
150
pe lay 95
ering 96 ing 95
m Tire Quality ding 136 rsal Transmitter 112 batteries, osal 160 oil, disposal 142
while parked 111 Viscosity 142 Voice entry 23
W Warm feet cool head 104 Warning lamps 19 Warning messages 77 Warning triangle 24 Warranty and Service Guide
Booklet for Canadian models 145
special wash progr Windshield washer
filling reservoir 14 Windshield wiper 68
blade replacement Winter tires 138 Wiper blade
replacement 150 Wipers 68 Work in the engine
compartment 139
V Vacuum cleaner
power outlet 124 socket 118
Washer fluid 141 Washer reservoir, filling 141 Washer/wiper system 68 Weights 170
X Xenon lamps 152
Refueling
So that you will have important specifi- cations available when you stop to refuel, we recommend that you supple- ment this table with data which apply to your vehicle. Consult the index for individual specifications.
Fuel
Please enter your preferred fuel here.
Engine oil
The oil volume between the two marks on the oil dipstick corresponds to
Designation
Quality
mmer Winter
Rear Front Rear
approx. 1.1 US quarts/1 liter.
Tire inflation pressures
4 persons
5 persons or 4 plus luggage
Su
Front
The Ultimate Driving Machine
0 1
4 1
0 1
5 7
0 9
8 u e
More about BMW
bmwusa.com
Related manuals for BMW X5 4.4i SUV X5 Series 2003 Owner's Manual
Manualsnet FAQs
If you want to find out how the X5 Series BMW works, you can view and download the BMW X5 4.4i SUV X5 Series 2003 Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for BMW X5 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a BMW X5 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the BMW X5 4.4i SUV X5 Series 2003 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This BMW X5 4.4i SUV X5 Series 2003 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download BMW X5 4.4i SUV X5 Series 2003 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print BMW X5 4.4i SUV X5 Series 2003 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW X5 4.4i SUV X5 Series 2003 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.