BMW X5 4.4i SAV X5 Series 2006 Owner's Manual PDF
en
Summary of Content for BMW X5 4.4i SAV X5 Series 2006 Owner's Manual PDF
The Ultimate Driving Machine
Owner's Manual for Vehicle
X5 3.0i X5 4.4i X5 4.8is
Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:
Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new BMW. The manual contains important data and instructions intended to assist you in obtaining maximum satisfaction from your BMW's unique array of advanced technical fea- tures. It also contains information on vehicle maintenance designed to enhance operating safety while simultaneously helping you to maintain your BMW's value throughout an extended service life. For additional information refer to the supple- mental manuals.
This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information.
We wish you an enjoyable driving experience.
BMW AG
Contents
2005 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 159 867 US English VIII/05 Printed in Germany Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.
N o
te s
O ve
rv ie
w
C o
n tr
o ls
a n
d f
e at
u re
sAbout this Owner's Manual 8 Symbols used 8 Your individual vehicle 8 Status at time of printing 9 For your own safety 9 Symbol on vehicle parts 10 Service and Warranty 10 Reporting safety defects 11
Cockpit 14 Instrument cluster 15 Indicator and warning lamps 19 Buttons on steering wheel 23 Warning triangle 24 First-aid kit 24 Refueling 24 Fuel specifications 26
Locks and security systems: Keys 30 Central locking system 30 Opening and closing:
from outside 31 Opening and closing:
from inside 34 Liftgate 35 Tailgate 36 Alarm system 38 Windows 39 Panorama glass roof 41
Adjustments: Sitting safely 43 Seats 44 Mechanical seat adjustment 45 Power seat adjustment 46 Head restraints 47 Power rear-seat backrest
adjustment 48 Safety belts 49 Seat, mirror and steering wheel
memory 50 Heated seats 52 Steering wheel 52 Steering wheel heater 53 Mirrors 53
5n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
C o
n tr
o ls
a n
d f
e at
u re
s Passenger safety systems: Airbags 55 Transporting children safely 57 Vehicle Memory,
Key Memory 61
Driving: Ignition lock 62 Starting engine 62 Switching off engine 63 Handbrake 64 Manual transmission 64 Automatic transmission with
Steptronic 65 Turn signals/
headlamp flasher 68 Washer/wiper system/
rain sensor 69 Cruise control 71
Everything under control: Odometer, outside temperature
display 73 Tachometer 74 Energy control 74 Engine oil temperature gauge 75 Fuel gauge 75 Coolant temperature gauge 76 Service Interval Display 76 Check Control 77 Computer 79 MID Multi-Information
Display 81
Digital clock in MID 82 Computer in MID 85
Technology for safety and driving convenience: PDC Park Distance Control 90 Antilock Brake System 91 DSC Dynamic Stability
Control 92 xDrive 94 HDC Hill Descent Control 94 Self-leveling suspension 95 2-axle self-leveling
suspension 96 Brake force display 98 Flat Tire Monitor 98
Lamps: Parking lamps/low beams 100 Adaptive Head Light 101 High beams/roadside parking
lamps 101 Front fog lamps 102 Instrument lighting 102 Interior lamps 103
Controlling the climate for pleasant driving: Air conditioner 104 Automatic climate control 107 Roller sun blinds 113 Parked car ventilation 113
Cabin convenience: Integrated universal remote
control 114 Telephone 116 Interior rearview mirror with
digital compass 117 Glove compartment 119 Storage compartments 119 Cup holders 120 Ashtray, front 121 Ashtray, rear 121 Cigarette lighter, rear 122
Loading and transporting: Ski bag 123 Cargo area
Folding rear backrests down 124 Roll-up cover 125 Partition net 125 Covers in cargo area 127 Sockets 128 Pull-out cargo floor 128
Cargo loading 130 Roof-mounted luggage rack 132
Contents O
p e
ra ti
o n
, m ai
n te
n an
c e
O w
n e
r se
rv ic
e p
ro c
e d
u re
sSpecial operating instructions: Breaking-in 136 General driving notes 137 Driving your X5 138 Safe braking 140
Wheels and tires: Tire inflation pressure 141 Tire identification marks 145 Wheel/tire condition 146 Replacing wheels/tires 148 Snow chains 149
Under the hood: Hood 150 Engine compartment
essentials 151 Washer fluid 152 Engine oil 152 Coolant 154 Brake fluid 155
Care and maintenance: The BMW Maintenance
System 156 OBD interface socket 157
Replacement procedures: Onboard tool kit 160 Windshield wiper blades 160 Lamps and bulbs 161 Changing a wheel 165 Vehicle battery 171 Fuses 172
Assistance, giving and receiving: Receiving assistance 173 Jump starting 174 Tow-starting and towing 175
7n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
T e
c h
n ic
al d
at a
In d
e xEngine specifications 180
Dimensions 181 Weights 182 Capacities 183
Everything from A to Z 186
Notes
8n
About this Owner's Manual We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find certain topics is by using the detailed index at the end. If you desire an initial overview of your vehicle, this can be found in the first chapter.
Should you want to sell your BMW some day, please remember to hand over the Owner's Manual as well; it is an important component of your vehi- cle.
Additional sources of information:
If you have any questions, your BMW Sports Activity Vehicle center will be glad to advise you.
You can find information on BMW, e.g. technology, on the Internet at www.bmwusa.com.
Symbols used Indicates precautions that must be followed precisely in order to
avoid the possibility of personal injury and serious damage to the vehicle.
Indicates information that will assist you in gaining the optimum
benefit from your vehicle and enable you to care more effectively for your vehicle.
Refers to measures that can be taken to help protect the environ-
ment.
< Marks the end of a specific item of information.
* Indicates special equipment, country- specific equipment and optional extras, as well as equipment and functions not yet available at the time of printing.
Vehicle Memory, Key Memory, refer to page 61. Identifies func-
tions that can be specifically adapted for a particular key or vehicle. These adjustments can be performed by your BMW Sports Activity Vehicle center.
Your individual vehicle On buying your BMW, you have decided in favor of a model with individ- ualized equipment and features. This Owner's Manual describes all models and equipment that BMW offers within the same group.
We hope you will understand that equipment and features are included that you might not have chosen for your vehicle. Sections describing options and special equipment are marked by an asterisk *to assist you in identifying possible differences between the descriptions in this manual and your own vehicle's equipment.
Should equipment of your BMW not be described in this Owner's Manual, please refer to the included Supple- mentary Owner's Manuals.
Notes
9n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Status at time of printing BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. Thus in rare circumstances, the features described in this Owner's Manual may differ from those of your vehicle.
For your own safety Maintenance and repair:
Advanced technology, e.g. the use of modern materials and high-
performance electronics, requires spe- cially adapted maintenance and repair methods. Therefore, only have corre- sponding work on your BMW carried out by a BMW Sports Activity Vehicle center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. If work is carried out improperly, there is a danger of consequential damage and the related safety risks.<
California Proposition 65 Warning:
California laws require us to state the following warning:
Engine exhaust and a wide variety of automobile components and
parts, including components found in the interior furnishings in a vehicle, con- tain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of com- ponent wear contain or emit chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm. Battery posts, terminals and related accessories contain lead and lead com- pounds. Batteries also contain other chemicals known to the State of Cali- fornia to cause cancer. Wash your hands after handling. Used engine oil contains chemicals that have caused cancer in laboratory ani- mals. Always protect your skin by washing thoroughly with soap and water.<
Parts and accessories:
For your own safety, use genuine parts and accessories approved
by BMW. When you purchase accessories tested and approved by BMW and Genuine BMW Parts, you simultaneously acquire the assurance that they have been thor- oughly tested by BMW to ensure opti- mum performance when installed on your vehicle. BMW warrants these parts to be free from defects in material and workman- ship. BMW will not accept any liability for damages resulting from installation of parts and accessories not approved by BMW.
Notes
10nNotes
BMW cannot test every product on the market to determine whether it can be used on a BMW safely and without risk to either the vehicle, its operation, or its occupants. Genuine BMW Parts, BMW Accessories and other products approved by BMW, together with professional advice on using these items, are available from all BMW Sports Activity Vehicle centers. Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones including operation of any mobile phone from within the vehicle without using an externally mounted antenna or trans- ceiver equipment such as CBs, walkie- talkies, ham radios or similar accesso- ries, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the BMW Limited Warranty. Refer to your BMW Sports Activity Vehicle center for addi- tional information.<
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any automotive repair establishment or individual using any certified auto- motive part.<
Symbol on vehicle parts Indicates that you should consult the relevant section of this
Owner's Manual for information on a particular part or assembly.
Service and Warranty This manual is supplemented by a Ser- vice and Warranty Information Booklet for US models or a Warranty and Ser- vice Guide Booklet for Canadian mod- els.
We recommend that you read this pub- lication thoroughly.
Your BMW is covered by the following warranties:
>New Vehicle Limited Warranty >Rust Perforation Limited Warranty >Federal Emissions System Defect
Warranty >Federal Emissions Performance
Warranty >California Emissions Control System
Limited Warranty
Detailed information about these war- ranties is listed in the Service and War- ranty Information Booklet for US mod- els or in the Warranty and Service Guide Booklet for Canadian models.
11n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Reporting safety defects For US customers:
The following only applies to vehicles owned and operated in the US.
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National High- way Traffic Safety Administration NHTSA in addition to notifying BMW of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 800-831-1117.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in indi- vidual problems between you, your dealer, or BMW of North America, LLC.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-800-327-4236 (TTY: 1-800-424- 9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other infor- mation about motor vehicle safety from http://www.safercar.gov
For Canadian customers:
Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may telephone the toll-free hotline 1-800-333-0510, or contact Transport Canada by mail at: Trans- port Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5.
Notes
12n
13n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
Overview
14n
1 Parking lamps/low beams 100
2 Fog lamps 102
3 >Turn signals 68 >Roadside parking lamps 101 >High beams 101 >Headlamp flasher 68 >Computer 79
4 Washer/wiper system/rain sensor 69
5 Rear window defroster 105, 110
6 Central locking system 30
7 Hazard warning flashers
8 Horn: the entire surface
9 Adjusting steering wheel 52
Cockpit
5 3
0 d
e 4
2 7
15n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
1 Fuel gauge 75
2 Indicator lamp for turn signals 22
3 Speedometer
4 Indicator and warning lamps 19 to 22
5 Tachometer 74 Energy control 74
6 Coolant temperature gauge 76
Instrument cluster X5 3.0i, 4.4i
5 3
0 u s2
3 3
16nInstrument cluster X5 3.0i, 4.4i
7 Indicator and warning lamps 19 to 22
8 Reset button for trip odometer 73
9 Display for Check Control 77
10 Odometer and trip odometer 73
11 Display for computer; operation via turn signal lever, refer to page 79: >Outside temperature >Average fuel consumption >Cruising range >Average speed
12 Service Interval Display 76
13 Selector lever and program display for automatic transmission* 65
14 Indicator and warning lamps 19 to 22
5 3
0 u s2
3 4
17n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Instrument cluster* X5 3.0i, 4.4i
1 Fuel gauge 75
2 Indicator lamp for turn signals 22
3 Speedometer
4 Indicator and warning lamps 19 to 22
5 Tachometer 74 Energy control 74
6 Coolant temperature gauge 76
7 Indicator and warning lamps 19 to 22
8 Reset button for trip odometer 73
9 Service Interval Display 76
10 Display for >Trip odometer/odometer 73 >Outside temperature 73
11 Display for Check Control 77
12 Selector lever and program display for automatic transmission* 65
13 CHECK button 77
14 Indicator and warning lamps 19 to 22
5 3
0 u s2
5 1
18nInstrument cluster X5 4.8is
1 Fuel gauge 75
2 Indicator lamp for turn signals 22
3 Speedometer
4 Indicator and warning lamps 19 to 22
5 Tachometer 74 Engine oil temperature gauge
6 Coolant temperature gauge 76
7 Indicator and warning lamps 19 to 22
8 Reset button for trip odometer 73
9 Service Interval Display 76
10 Display for >Trip odometer/odometer 73 >Outside temperature 73
11 Display for Check Control 77
12 Selector lever and program display for automatic transmission 65
13 CHECK button 77
14 Indicator and warning lamps 19 to 22
5 3
0 u s2
5 2
19n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Indicator and warning lamps
Technology that monitors itself Indicator and warning lamps that are identified by + are tested for proper functioning whenever the ignition key is turned. They each light up once for dif- ferent periods of time.
If a malfunction should occur in one of the monitored systems, the corre- sponding lamp will not go out after the engine is started or it will light up while the vehicle is moving. The section below will instruct you on what to do in this situation.
Red: stop immediately Battery charge current + The battery is not being charged. There is a malfunction
of the alternator drive belt or in the charging circuit of the alternator. Have the system checked immediately.
If the drive belt is defective, do not continue driving. The engine could
be damaged due to overheating. When the drive belt is defective, you will also have to exert increased steering effort.<
Engine oil pressure + Stop immediately and switch off the engine. Check the engine oil
level; top up as required. If the oil level is correct: have the system checked immediately.
Do not continue driving. The engine could be damaged due to
inadequate lubrication.<
Handbrake*/ brake hydraulic system + Lights up with handbrake
engaged. For additional information, refer to page 64
Lights up although the handbrake is released: stop immediately. The brake fluid in the reservoir has fallen to below the minimum level. At the same time, a considerably longer brake pedal travel may be noticeable. Have the system checked immediately.
During continued driving, increased brake pedal pressure
may be necessary and considerably longer braking distances may result. Please remember to adapt your driving style accordingly.<
Before continuing your journey, be sure to read the notes on pages 140 and 155.
Also lights up in the Check Control with the message CHECK BRAKE LININGS.
Display of the previously described malfunction in Cana- dian models.
20nIndicator and warning lamps
Transmission temperature* + The transmission is overheated. Reduce speed immediately and
stop at a suitable location so that the system can cool down again. Have the system checked immediately.
Yellow: stop immediately Flat Tire Monitor + An acoustic signal also sounds: there is a flat tire or extensive
inflation pressure loss. Reduce speed immediately for stopping while avoiding extreme braking and steering maneu- vers. For additional information, refer to page 99
Red or yellow: continue to drive cautiously
The red brake warning lamp lights up together with the warn- ing lamps for ABS and DSC/ xDrive. In addition, a warning signal sounds: ABS, DSC, HDC and xDrive have failed. Drive may be being exerted exclusively via the rear axle. Have the system checked
as soon as possible. For additional information, refer to pages 91, 92
Proceed cautiously and defen- sively. When driving on poor
roads, avoid using full throttle or press- ing the accelerator beyond the kick- down point and also avoid forceful braking or full braking. Otherwise, the drive train may be damaged or acci- dents can occur.<
If the brake warning lamp lights up in yellow in the above-described combi- nation, the EBV Electronic brake-force distribution is still available.
Display of the previously described malfunction in Cana- dian models.
21n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Indicator and warning lamps
Red: an important reminder Handbrake* Lights up with handbrake engaged.
For additional information, refer to page 64
Handbrake warning lamp* for Canadian models
Please fasten safety belts + Indicator lamp flashes or lights up. In addition, a signal sounds
and, depending on the equipment, a message* appears in the Check Con- trol. Please check safety belts for cor- rect placement.
The belt reminder is activated when the safety belt on the driver's side has not yet been fastened. The belt reminder is also active at speeds greater than approx. 5 mph/ 8 km/h when the passenger belt has not yet been fastened, heavy objects are placed on the front passenger seat, or passengers sitting in the front remove their safety belts. For additional information on safety belts, refer to page 49
Airbags + Malfunction in airbag system. Have the system checked as
soon as possible. For additional information, refer to page 55
Yellow: check as soon as possible DBC Dynamic Brake Control + Malfunction in the DBC system. Please have the system
checked as soon as possible. For details on DBC, refer to page 91
Display of the previously described malfunction in Cana- dian models.
Engine oil level Comes on while driving: the oil level is at the absolute minimum;
refill as soon as possible. Do not drive more than approx. 30 miles/50 km until you do. For additional information, refer to page 152
Engine oil level Comes on after the engine has been switched off: add engine
oil at your earliest opportunity, e.g. when you stop to refuel. For additional information, refer to page 152
Automatic transmission* The automatic transmission switches into the emergency
program due to a malfunction. Have the system checked as soon as possible. For additional information, refer to page 67
Brake pads* + Have the condition of the brake pads checked.
For additional information, refer to page 140
Self-leveling suspension* + The self-leveling suspension is inactive. Have the system
checked as soon as possible. For additional information, refer to page 95
22nIndicator and warning lamps
DSC Dynamic Stability Control/ xDrive + The warning lamp lights up con-
tinuously and a warning signal sounds: DSC and HDC or the xDrive 4-wheel drive system have failed. The stabilizing interventions of DSC or the xDrive 4-wheel drive system are no longer available. Drive may be being exerted exclusively via the rear axle. Have the system checked as soon as possible. For additional information, refer to page 92
Proceed cautiously and defen- sively. When driving on poor
roads, avoid using full throttle or press- ing the accelerator beyond the kick- down point and also avoid forceful braking or full braking. Otherwise, the drive train may be damaged or acci- dents can occur.<
Engine electronics* Malfunction in the engine elec- tronics. You can continue to
drive with reduced engine output or engine speed. Have the system checked as soon as possible.
Service Engine Soon + If the indicator lamp lights up continuously or intermittently,
there is a malfunction in the exhaust- relevant electronic systems. Although the vehicle remains operable, the sys- tem must be checked as soon as possi- ble. For additional information, refer to page 157
Display of the previously described malfunction in Cana- dian models.
Check Gas Cap* + Warning lamp lights up. Fuel filler cap is not properly closed
or is missing. Check whether the fuel filler cap is properly closed. For addi- tional information, refer to page 25
Green: for your information Turn signals Flashes when the turn signals are operated. Rapid flashing
indicates a system malfunction. For additional information, refer to page 68
Cruise control* Lights up when system is switched on: ready for operation
using the buttons on the steering wheel. For additional information, refer to page 71
Fog lamps Lights up when fog lamps are switched on. For additional
information, refer to page 102
Blue: for your information High beams Lights up when the high beams are on or the headlamp flasher
is actuated. For additional information, refer to pages 68, 101
23n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Buttons on steering wheel*
The buttons integrated into the steering wheel are provided so that you can operate a number of accessories quickly and without being distracted from traffic conditions. You may oper- ate:
>selected functions of the audio sources*
> the recirculated-air mode of the air conditioner* or the steering-wheel heater*
> the cruise control >selected phone functions* and > the voice command system*.
In order to operate a system, the corresponding system must be
switched on.<
Press briefly: Accept incoming call, start dialing, terminate call. Extended pressure: Switch voice command system on and off
Display/hide phonebook. Display the entries consecutively with the buttons for forward/back
Forward:
>Radio Press briefly: next stored station Extended pressure: station search function
>CD Press briefly: track search Extended pressure: fast forward in track
>Cassette Press briefly: stop track search or fast forward Extended pressure: fast forward
>Telephone Scroll through list of names
Reverse: functions the same as fast forward
Volume
On the sports steering wheel*, there are +/ buttons for volume on the left side of the steering wheel.
Cruise control: resume
Cruise control: store and accelerate + as well as store and decelerate On the sports steering wheel*, there are +/ buttons on the right side of the steering wheel for the cruise control.
Cruise control: activate/interrupt/deac- tivate
Recirculated-air mode* and AUC auto- matic recirculated-air control or steer- ing wheel heater*: switch on/off
24nWarning triangle* First-aid kit* Refueling
1. Open the cover on the left in the cargo area by lifting the handle on the cover
2. Pull the tab of the retaining strap, refer to arrow, and remove the haz- ard warning triangle from the support bracket
3. To install: slide the hazard warning triangle into the support bracket and press on the retaining strap.
5 3
0 u s0
0 5
The first-aid kit is located under the front passenger's seat.
To open: pull the handle and fold the cover down.
To close: fold the cover up.
Some of the articles in the first-aid kit may be used within a limited time only. Therefore, check the expiration dates of the contents regularly and replace the contents concerned in good time as needed.
5 3
0 d
e 2
4 2
Fuel filler door Before filling the tank, switch off the engine. If you do not, fuel can-
not be added to the tank and the Ser- vice Engine Soon lamp may come on.<
To open the fuel filler door, press on the front edge.
In the event of an electrical malfunction, you can also open the fuel filler door manually:
1. Open the cover on the right in the cargo area by lifting the handle on the cover
2. Pull the knob with the fuel pump symbol.
5 3
0 d
e 2
4 3
25n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Refueling
When handling fuels, always observe any safety guidelines
posted at the service station. Never carry spare fuel containers in your vehi- cle. Whether empty or full, these con- tainers can leak, cause an explosion, or lead to fire in the event of a collision.<
Observe the following when refueling
Open the filler cap carefully to prevent fuel from spraying out.
Fuel spray may cause injury. Do not top off. Topping off may cause fuel spillage.<
Keep the filler cap in the bracket attached to the fuel filler door.
When refueling, insert the filler nozzle completely into the filler pipe. Pulling the nozzle out of the pipe during refuel- ing
> results in premature pump shutoff >and will reduce the effect of the vapor
recovery system on the pump.
The fuel tank is full when the filler noz- zle clicks off the first time.
5 3
0 u s0
0 8
To close the fuel filler cap: Fit the cap and turn it clockwise until you clearly hear a click.
Close the filler cap carefully after refueling until a click is heard.
While closing, be sure not to jam the strap attached to the cap between the gas cap and the vehicle. A loose or missing cap will activate the message CHECK GAS CAP in the Check Con- trol* or the Check Gas Cap lamp*.<
Tank capacity: approx. 24.6 gal./93 liters, including a reserve of: 6-cylinder engine: approx. 2.0 gal./ 8 liters: 8-cylinder engine: approx. 2.5 gal./ 10 liters.
Never attempt to continue driving until the tank is completely empty,
as engine functions could be affected, and the vehicle could sustain damage as a result.<
26nFuel specifications
The engine uses lead-free gasoline only.
Required fuel Premium Unleaded Gasoline, Minimum Octane Rating: 91.
Minimum Octane Rating corresponds to the Anti Knock Index AKI and is deter- mined according to the so-called (R+M)/2 method.
Do not use leaded gasoline: use of leaded fuel will permanently dam-
age the lambda probe and catalytic converter of your vehicle.<
Use high-quality brands Field experience has indicated signifi- cant differences in fuel quality: volatility, composition, additives, etc., among gasolines offered for sale in the United States and Canada. Fuels containing up to and including 10% ethanol or other oxygenates with up to 2.8% oxygen by weight, that is, 15% MTBE or 3% meth- anol plus an equivalent amount of co- solvent, will not void the applicable warranties with respect to defects in materials or workmanship.
The use of poor-quality fuels may result in drivability, starting and
stalling problems, especially under cer- tain environmental conditions such as high ambient temperature and high alti- tude. Should you encounter drivability prob- lems that you suspect could be related to the fuel you are using, we recom- mend that you respond by switching to a recognized high-quality brand. Failure to comply with these recom- mendations may also result in unsched- uled maintenance.<
27n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
28n
29n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Index
Technical data
Controls
Owner service procedures
30nKeys Central locking system
The key set 1 Each master key with remote control
contains a long-life battery as a power supply, which is automatically recharged in the ignition lock while driving. It is therefore necessary to use each master key at least twice per year in order to maintain the charge. Depending on which master key the vehicle detects during unlocking, different settings will be requested and executed in the vehi- cle, refer to Vehicle and Key memory on page 61.
5 3
0 d
e 3
6 7
2 Spare key for storage in a safe place, such as in your wallet. This key does not fit in the lock of the glove compartment. This is an advan- tage in a hotel, for example. The key is not intended for continuous use.
Replacement keys Additional or replacement keys are available at your BMW Sports Activity Vehicle center.
The concept The central locking system is ready for operation as soon as you close the front doors. The system engages or releases the locks on the
>doors > liftgate/tailgate > fuel filler door.
The central locking system can be operated
> from outside via the remote control as well as via the driver's door lock
> from inside via the button for the cen- tral locking system.
If the system is locked from inside, the fuel filler door remains unlocked, refer to page 34.
When the system is actuated from out- side of the vehicle, the anti-theft system is actuated simultaneously. This pre- vents the doors from being unlocked via lock buttons or door handles. The alarm system is also armed or disarmed.
In an accident of sufficient severity the central locking system automatically unlocks, but only doors which have not been locked separately with the lock buttons, refer to page 34. In addition, the hazard warning flashers and the interior lamps are switched on.
31n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Opening and closing: from outside
Using remote control When you engage/release the vehicle locks, you also activate/deactivate the anti-theft system, arm/disarm the alarm system, and switch the interior lamps on/off.
Protect the remote control against unauthorized use by handing over
only the spare key, for example when using hotel valet parking.<
You can find more detailed information on the alarm system on page 38.
Since passengers or animals remaining in the vehicle might be
able to lock the doors from the inside, take the vehicle's keys with you so that the vehicle can be opened again from the outside at any time.<
Unlocking vehicle
Press the button.
Press the button once to unlock the driver's door and the fuel filler door only; press a second time to unlock all remaining doors as well as the liftgate/ tailgate.
Convenience opening mode
Press the button briefly and then hold down. The windows and the panorama glass roof open.
Locking and securing
Press the button.
As a confirmation that the vehicle is correctly locked, the hazard warning flashers light up.
If you so desire, you can have this function deactivated if your vehi-
cle is not equipped with an alarm sys- tem.<
Switching on interior lamps
If the vehicle is locked, press the but- ton. With this function, you can also search for your vehicle, e.g. when parked in an underground garage.
Switching off tilt alarm sensor and interior motion sensor
Press the button once again immedi- ately after locking. For more detailed information, refer to page 39.
Opening liftgate
Briefly press the button.
The liftgate will open slightly, regardless of whether it was previously locked or unlocked.
32nOpening and closing: from outside
If the vehicle is locked, the liftgate is also locked again when closed.
Before and after a trip, be sure that the liftgate was not opened unintention- ally.<
Panic mode
When the alarm system is armed, you can trigger an alarm in response to an impending danger by pressing and holding the button for more than two seconds.
To switch off the alarm
Press the button.
Malfunction The remote control can be subjected to malfunctions by local radio waves. Should the remote control fail to oper- ate owing to interference of this kind, unlock and lock the vehicle via the door lock using the master key.
If it is no longer possible to lock the vehicle via the remote control, the bat- tery is discharged. Use this remote con- trol during an extended drive; this will recharge the battery, refer to page 30.
For US owners only The transmitter and receiver units com- ply with part 15 of the FCC/Federal Communication Commission regula- tions. Operation is governed by the fol- lowing:
FCC ID: LX8EWS LX8FZVS LX8FZVE
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
>This device may not cause harmful interference, and
> this device must accept any interfer- ence received, including interference that may cause undesired operation.
Any unauthorized modifications to these devices could void the
user's authority to operate the equip- ment.<
33n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Opening and closing: from outside
Using door lock One turn of the key in the driver's door lock unlocks the driver's door only. Turning the key a second time unlocks all of the remaining doors, the liftgate/ tailgate and the fuel filler door.
As a confirmation that the vehicle is correctly locked, the hazard warning flashers light up.
If you so desire, you can deacti- vate this function if your vehicle is
not equipped with an alarm system.<
5 3
0 d
e 2
4 4
Convenience operation You also have the option of operating the windows and the panorama glass roof from the door lock.
>To open: with the door closed, turn the key to the Unlock position and hold it.
>To close: with the door closed, turn the key to the Lock position and hold it.
Watch during the closing process to be sure that no one is injured.
Releasing the key stops the operation.<
Manual operation In the event of an electrical malfunction, turn the key to the extreme left or right to unlock/lock the door.
34nOpening and closing: from inside
This button serves to unlock or lock doors and the liftgate, but does not activate the anti-theft system. The fuel filler door remains unlocked.
You have the option of setting the central locking system to lock
automatically as soon as you begin to drive. This can be set to be key- specific.<
5 3
0 d
e 2
2 0
If only the driver's door was unlocked from the outside and
you press the button >all other doors, the liftgate/tailgate
and the fuel filler door will be unlocked when the driver's door is opened
> the driver's door will be locked again when it is closed.<
Unlocking and opening doors >Either unlock the doors together with
the button for the central locking sys- tem and then pull the door handle above the armrest or
>pull the release handle for each door twice: the first pull unlocks the door, and the second one opens it.
Locking >Use the central locking button to lock
all of the doors simultaneously, or >press down the individual lock but-
tons. As an added design feature to prevent the driver from being inad- vertently locked out of the vehicle, the driver's lock button will not engage as long as the door is open.
When the vehicle is moving, do not lock the doors with the lock
buttons. Doors locked in this manner would not unlock automatically in the event of an accident. Since passengers or animals remaining in the vehicle might be able to lock the doors from the inside, take the vehicle's keys with you so that the vehicle can be opened again from the outside at any time.<
35n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Liftgate
Opening from outside Press the button, refer to arrow: The liftgate opens slightly.
The cargo area is illuminated whenever the liftgate is opened, refer also to page 103.
With the liftgate open, the dis- tance from the ground to the
upper edge is more than 6.6 ft/2 m. Please remember this, e.g. when open- ing the liftgate in a garage.<
5 3
0 d
e 2
4 5
Opening from inside Press this button to open the liftgate when the vehicle is stationary.
If pointed or sharp-edged objects could strike the rear window while
driving, be sure to provide protection around all edges. Failure to do so could result in damage to the heating conduc- tors of the rear window.<
For information on the cargo area cover and on other details in the cargo area, refer to Cargo area, beginning on page 124.
5 3
0 d
e 4
1 5
Manual release In the event of an electrical malfunction, you can release the liftgate manually:
1. Remove the plastic plug from inside the cargo area and pull toward the interior, refer to arrow. The liftgate will be released
2. Reinstall the plug.
5 3
0 d
e 3
1 6
36nLiftgate Tailgate
Closing You can pull the liftgate down by plac- ing both hands in the handle recesses, refer to arrows.
Automatic Soft Close function To close the liftgate, merely press it down gently. The closing process will then be carried out automatically.
To avoid injuries, be sure that the travel path of the liftgate is clear
when it is closed, as with all closing procedures.<
5 3
0 u s0
1 7
Opening Press the button: You can fold the tailgate down.
When opened, the tailgate can accept loads of up to 440 lbs./
200 kg. When the vehicle is stationary you may, for example, utilize the tail- gate as a seat or as a loading platform for luggage or recreation gear.<
5 3
0 d
e 2
4 6
Manual release In the event of an electrical malfunction, you can release the tailgate manually:
1. Unfasten the trim panel clip with the vehicle key or with a screwdriver, refer to arrow 1, and remove it toward the top, refer to arrow 2
5 3
0 d
e 3
1 7
37n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Tailgate
2. Using the same tool, press the latch in the direction of the arrow; the tail- gate is released
3. Reinstall the trim panel.
5 3
0 d
e 2
4 1
Luggage straps Use the luggage straps on the cargo floor cover to secure smaller items of luggage.
Movement is reduced when objects are placed on the straps.
The lashing eyes located at the corners of the cargo area provide you with a convenient means of attaching luggage nets* or flexible straps for securing lug- gage.
Refer also to Cargo loading on page 130.
3 9
4 d
e 3
0 2
38nAlarm system
The concept The vehicle alarm system responds:
>When a door, the hood or the liftgate is opened
>To movement in the vehicle interior: interior protection, refer to Tilt alarm sensor and Interior motion sensor
>To variations in the vehicle tilt angle such as occur during attempts to steal the wheels or tow the vehicle
>To interruption of battery voltage.
The system responds to unauthorized vehicle entry and attempted theft by simultaneously activating the following:
>An acoustical alarm, which sounds for 30 seconds
>The hazard warning flashers, which flash for approx. five minutes
>The high beams, which flash on and off in the same rhythm as the hazard warning flashers.
Arming and disarming alarm system When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time.
You can have different acknowl- edgment signals set to confirm
arming and disarming.<
The liftgate can also be opened with the system armed using the button on the remote control, refer to page 31. The liftgate is locked again when closed. Pressing the button longer triggers the alarm: panic mode, refer to page 32.
Indicator lamp displays >The indicator lamp below the interior
rearview mirror flashes continuously: the system is armed.
>The indicator lamp flashes when the vehicle is locked: the doors or liftgate are not properly closed. Even if you do not close the alerted area, the sys- tem begins to monitor the remaining areas, and the indicator lamp flashes continuously after 10 seconds. How- ever, the interior motion sensor is not activated.
>The indicator lamp goes out when the vehicle is unlocked: no manipulation or attempted intrusions have been detected in the period since the sys- tem was armed.
5 3
0 u s2
4 1
39n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Alarm system Windows
>The indicator lamp flashes for 10 sec- onds after the vehicle is unlocked: an attempted entry has been detected in the period since the system was armed.
Following triggering of an alarm, the indicator lamp will flash continuously.
Tilt alarm sensor The tilt of the vehicle is monitored. The alarm system reacts, for example, if someone attempts to steal the wheels or tow the vehicle.
Interior motion sensor In order for the interior motion sensor to function properly, the windows and panorama glass roof must be com- pletely closed.
Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. This prevents unintentional alarms, e.g. in the following situations:
> In duplex garages >When transporting on car-carrying
trains > If animals are to remain in the vehicle.
To switch off the tilt alarm sensor and interior motion sensor:
Press the button on the remote control twice consecutively.
The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are switched off until the next unlocking and locking actions are executed.
To prevent injuries, exercise care when closing the windows and
keep them in your field of vision until they are shut. Always take along the ignition key when you leave the vehicle, as otherwise chil- dren could, for example, operate the windows and injure themselves.<
Opening and closing windows As of ignition key position 1:
>Press the switch up to the resistance point: The window continues to move downward as long as you continue to hold the switch
>Briefly press the switch beyond the resistance point: The window moves downward auto-
5 3
0 u s0
2 0
40nWindows
matically. Briefly press the switch again to stop the opening movement.
You can close the windows in the same manner by pulling the switch.
After the ignition has been switched off:
You can still operate the windows for approx. 1 minute, as long as no door has been opened.
For the convenience mode via the remote control or the door lock, refer to pages 31, 33.
Anti-trapping mechanism A contact strip is integrated into the inner side of each of the upper window frame sections. If pressure is exerted against this contact strip while a win- dow is being raised, the system will respond by stopping the window and then retracting it a small distance.
Despite the anti-trapping mecha- nism, be extremely careful that the
closing path of the window is not obstructed whenever it is closed. Otherwise, an object might not touch the contact strip in some situations, with very thin objects, for instance. You can disable the anti-trapping mechanism by pulling the switch beyond the resistance point and hold- ing it. Because the power windows are sealed at high pressure to prevent wind noise when closed, a powerful motor is required for efficient closing. When closing the windows, always ensure that they are not obstructed in any way. Unsupervised use of these systems can result in serious personal injury. Remove the ignition key to deactivate the power windows whenever you leave the vehicle. Never leave the keys in the vehicle with unsupervised children. Never place anything that could obstruct the driver's vision on or next to the windows.<
Safety switch With the safety switch, you can prevent the rear windows from being opened or closed via the switches in the rear pas- senger area, by children, for example. You can also prevent adjustments of the power rear-seat backrests from the rear passenger area, refer to page 48.
Always press the safety switch when children ride in the rear, oth-
erwise unchecked closing of the win- dows could lead to injuries.<
5 3
0 u s2
0 9
41n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Panorama glass roof*
To avoid bodily injuries, be sure to watch the panorama glass roof
while closing. Always take along the ignition key when you leave the vehicle, as otherwise children could, for exam- ple, operate the roof and injure them- selves.<
The panorama glass roof is operational with the ignition key in position 2.
Raising, opening, closing Press the switch or slide it in the desired direction up to the resistance point. Release the switch to stop the motion.
The sliding visor is opened slightly when the panorama glass roof is raised.
The panorama glass roof can be opened or closed independently with the sliding visor open.
5 3
0 u e 2
6 2
Ventilation setting: The panorama glass roof is raised and the sliding visor is opened slightly: Briefly press the switch twice consecu- tively.
After the ignition has been switched off: You can still operate the roof for approx. 1 minute, as long as no door has been opened.
Automatic opening and closing Briefly press the switch beyond the resistance point and then release it. Briefly pressing the switch again stops the motion.
Opening and closing panorama glass roof and sliding visor together: Briefly press the switch beyond the resistance point twice consecutively. Briefly pressing the switch again stops the motion.
42nPanorama glass roof*
Comfort position Each time the panorama glass roof is completely opened or closed, it stops in the comfort position. Use the switch to continue the motion after this if you wish.
In the comfort position, the wind noises in the interior are reduced.
Anti-trapping mechanism If the panorama glass roof or sliding visor encounter resistance when clos- ing from roughly one third of the roof opening or when closing from the raised position, the closing action is interrupted and the panorama glass roof and sliding visor reopen a little.
Despite the anti-trapping mecha- nism, inspect the roof's travel path
prior to closing it, as the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the roof would continue closing. The anti-trapping mechanism for clos- ing the panorama glass roof is deacti- vated if the switch is pressed beyond the resistance point and held there. The closing action is interrupted when you release the switch.<
Following a power failure Following interruptions in electrical power, for instance when the battery is disconnected, it is possible that the panorama glass roof will extend to its tilt-up position, but fail to respond to other commands. The system must be initialized. BMW recommends having this work carried out by your BMW Sports Activity Vehicle center.
Manual operation In the event of an electrical malfunction, you can operate the panorama glass roof manually.
1. Take the Allen wrench and screw- driver from onboard tool kit, refer to page 160
2. Remove the cover panel on the headliner. To do so, insert the screw- driver from behind slightly off-center and carefully pry the cover out
3. Insert the Allen wrench into the opening provided and turn the pan- orama glass roof in the desired direc- tion.
5 3
0 d
e 4
1 0
43n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
The ideal sitting position can make a vital contribution to relaxed driving that is as fatigue-free as possible. In con- junction with the safety belts, the head restraints and the airbags, the seat position also plays an important role for the passive safety of the occupants in an accident. To ensure that the safety systems operate with optimized effi- ciency, we strongly urge you to follow the instructions contained in the section below.
For additional information on transport- ing children safely, refer to page 57.
Airbags Always maintain an adequate dis- tance between yourself and the
airbags. Always hold the steering wheel by its rim, with hands at the 9 o'clock and 3 o'clock positions to minimize the risk of injuries to your hands and arms in the event of airbag deployment. No one and nothing is to come between the airbags and the seat occupant. Do not use the cover of the front airbag on the front passenger side as a storage area. Make sure that the front passen- ger is correctly seated and does not rest feet or legs on the instrument panel, as otherwise leg injuries can occur if the front airbag is triggered.
Make sure that the occupants do not rest their heads on side or head air- bags, as otherwise injuries can occur if the airbags are triggered.<
Even if you adhere to all instructions, injuries resulting from contact with air- bags cannot be fully excluded, depend- ing on the circumstances. The ignition and inflation noise may provoke a mild usually temporary hearing loss in extremely sensitive individuals.
For airbag locations and additional information on airbags, refer to page 55.
Head restraint A correctly adjusted head restraint reduces the risk of cervical injuries in accidents.
Adjust the head restraint so that its center is approximately at the
height of the ears, as otherwise there is an increased risk of injury in an acci- dent.<
Safety belt For every trip, use the safety belt on all occupied seats. Airbags complement the safety belt as an additional safety device, but they do not represent a sub- stitute.
Your vehicle has five seats that are all equipped with a safety belt.
At all times, occupants should sit upright and be properly restrained
infants and small children in appropri- ate child-restraint systems; larger chil- dren and adults using the safety belts. Each safety belt should always be used by only one person; babies and children may not ride on the lap of another pas- senger. In addition, pregnant women should always wear a safety belt, making espe- cially sure that the belt rests low on the hips in the lap area, and does not press against the abdomen. Do not route the belt across your neck or run it across sharp edges. Be sure that the belt does not become caught or jammed. Wear the safety belt without twisting, snugly across the lap and shoulders, as close to the body as pos- sible. Be sure not to route it over solid or breakable objects, otherwise the belt can slip over the hips in the lap area in a
Sitting safely
44nSitting safely Seats
frontal impact and injure the abdomen. Avoid wearing clothing that prevents the belt from fitting properly and pull the belt in the upper body area periodi- cally to readjust the tension in order to avoid a reduction in the restraint of the safety belt.<
If the middle safety belt in the rear is used, the wider seatback must be locked, refer to page 124, otherwise the safety belt has no restraining action.
Fasten safety belt, refer to page 49.
Note before adjusting Never try to adjust your seat while operating the vehicle. The seat
could respond with unexpected move- ment and the ensuing loss of vehicle control could lead to an accident. On the front passenger side as well, do not tilt the backrest too far toward the rear while driving. Failure to observe this precaution can prevent the belt from providing effective protection against injury, as the passenger could slide under the belt in an accident.<
Also observe the information on the safety belts on page 49 and on the head restraints on page 47.
Seat adjustment >Mechanical seat adjustment, refer to
following columns >Power seat adjustment, refer to
page 46 >Head restraints, refer to page 47 >Power rear-seat backrest adjustment,
refer to page 48
45n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Mechanical seat adjustment
Seat adjustment 1 Backward/forward
Pull the lever and slide the seat to the desired position. After you release the lever, move the seat forward or backward slightly so that it engages fully.
2 Height Pull the lever and apply weight to or remove weight from the seat as needed.
5 3
0 u s2
1 1
3 Backrest Pull the lever and apply weight to or remove weight from the backrest as needed.
Comply with the adjustment instructions on page 43. Failure
to do so could result in diminished per- sonal safety.<
5 3
0 u s2
1 2
Sports seat* adjustment You can also adjust the thigh support:
Pull the lever and adjust the position of the thigh support for your personal comfort.
5 3
0 d
e 2
5 3
46nPower seat adjustment*
Seat adjustment 1 Angle
2 Backward/forward
3 Cushion height
4 Backrest angle
Adjust the head restraint manually, refer to page 47.
Comply with the adjustment instructions on page 43. Failure
to do so could result in diminished per- sonal safety.<
5 3
0 u s0
2 4
Comfort seat* adjustment This seat allows you to make additional adjustments for
1 Lumbar support
2 Shoulder support
3 Head restraint height
Lumbar support:
You can also adjust the contours of the backrest to obtain additional support in the lumbar region.
The upper hips and spinal column receive supplementary support to help you maintain a relaxed, upright sitting position.
5 3
0 d
e 2
5 1
> Increase or decrease curvature: push switch forward or backward.
>Shift curvature up or down: push switch up or down.
47n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Power seat adjustment* Head restraints
Shoulder support:
Move the switch in the direction of the arrow to adjust the tilt angle of the shoulder support.
You can use the adjustable upper back- rest for supplementary support in the shoulder region. This provides a relaxed sitting position and helps relieve stress on the shoulder muscles.
For optimum adjustment, the following is recommended:
Driver and front passenger:
1. Adjust the upper backrest section to its extreme rear position
2. Adjust for the optimal sitting position as described on page 43
3. Bring the upper backrest section fur- ther forward until your shoulders are well supported.
5 3
0 d
e 2
5 2
Front passenger's seat adjusted for relaxed traveling:
1. Adjust the upper backrest section to its extreme rear position
2. Tilt the backrest down to a slightly more horizontal angle
3. Bring the upper backrest section for- ward until your shoulders are well supported.
Make corrections in the forward/ backward adjustment of the seat
to ensure that the safety belt still fits firmly against your body. If you do not do this, the protection provided by the safety belt may be reduced.<
Head restraint height:
Move the switch in the desired direc- tion.
A correctly adjusted head restraint reduces the risk of cervical injuries in accidents.
Adjust the head restraint so that its center is approximately at the
height of the ears, as otherwise there is an increased risk of injury in an acci- dent.<
Adjustments To adjust the angle of the front head restraints, tilt the head restraint to the desired angle.
To adjust the height of the front or rear head restraints, pull the head restraint up or push it down. Power height adjustment, refer to page 46.
5 3
0 d
e 2
5 0
48nHead restraints Power rear-seat backrest adjustment*
Removal front 1. Pull the head restraint upward to the
stop 2. Press the button, refer to arrow, and
remove the head restraint.
Installation front 1. Press the button, refer to arrow, and
insert the head restraint into the guides
2. Adjust the head restraint for your personal comfort.
Removal and installation rear To remove the head restraint, pull it outward with a firm movement. To install it, press it down firmly.
5 3
0 d
e 3
2 3
You can make separate adjustments of the backrest tilt angle on the right and left sides. You can select a comfortable sitting position and also increase the capacity of the cargo area by moving the back- rests into their full, upright position.
From the rear seats: press the corre- sponding switch.
You can prevent adjustments of the power rear-seat backrest from
the rear passenger area with the safety switch for the power windows, refer to page 40.<
5 3
0 d
e 4
2 2
From the cargo area: the switches are located on both sides of the cargo area.
5 3
0 d
e 2
2 4
49n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Safety belts
Comply with the instructions on page 43. Failure to do so could
result in diminished personal safety.<
Use the safety belts on all occupied seats for every trip. Airbags comple- ment the safety belt as an additional safety device, but they do not represent a substitute.
Fastening Make sure you hear the latch plate engage in the belt buckle.
Releasing 1. Press the red button in the belt
buckle 2. Hold the belt firmly 3. Guide the belt back into its reel.
5 3
0 u s0
3 4
In the back, the middle safety belt buckle is provided for use exclu-
sively by the middle passenger. If it is not possible to extract the center belt, this indicates that the larger back- rest is not securely locked, refer to page 124.<
Safety belt reminder for front seats
Indicator lamp flashes or lights up. In addition, a signal sounds and, depending on the equip-
ment, a message* appears in the Check Control. Please check to make sure safety belts are correctly fastened.
The belt reminder is activated when the safety belt on the driver's side has not yet been fastened. The belt reminder is also active at speeds greater than approx. 5 mph/ 8 km/h when the passenger belt has not yet been fastened, heavy objects are placed on the front passenger seat, or passengers sitting in the front remove their safety belts.
Safety belt height adjustment You can adjust the safety belts to fit your own physical dimensions by using the safety belt height adjustment:
Slide the button up or down as required.
Also observe the instructions on adjust- ing the seats on page 44.
5 3
0 d
e 2
5 9
50nSafety belts Seat, mirror and steering wheel memory*
Damage to safety belts If the safety belts are damaged or stretched in an accident: have the
entire belt system, including the ten- sioning mechanisms, replaced at your BMW Sports Activity Vehicle center or at a workshop that works according to BMW repair procedures with corre- spondingly trained personnel. Have the belt anchorage points inspected for damage at the same time. Failure to observe this precaution may prevent the safety belts from effectively provid- ing optimal protection when needed. If a child-restraint system was in the vehicle during an accident, consult the manufacturer's instructions regarding replacement.<
You can store and recall three different seat, exterior mirror and steering wheel positions. The illustration shows the buttons on the seat for making these position adjustments.
The adjustment of the lumbar sup- port is not stored in the memory.<
5 3
0 u s0
3 2
Storing 1. Turn the ignition key to position 1
or 2 2. Adjust the desired positions for the
seat, exterior mirror and steering wheel
3. Press the MEMORY button: LED in the button lights up
4. Press memory button 1, 2 or 3, as desired: LED goes out.
51n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Seat, mirror and steering wheel memory*
Calling up a stored setting Do not call up a position from the memory while the vehicle is mov-
ing. There is a risk of accident from unexpected movement of the seat or steering wheel.<
Convenience function:
1. Open the driver's door after unlock- ing the vehicle or place the ignition key in position 1
2. Briefly press memory button 1, 2 or 3, as desired. Movement stops immediately when one of the seat-adjustment or mem- ory buttons is activated during the adjustment process.
Security function:
1. With the driver's door closed and the ignition key either removed or in position 0 or 2
2. Maintain pressure on the desired memory button 1, 2 or 3 until the adjustment process is completed.
If you press the MEMORY button accidentally: press the button
again the LED goes out.<
You can have your vehicle pro- grammed to automatically dial in
your own individual adjustment settings for the seat, mirrors and steering wheel whenever you use your personal remote control to unlock the vehicle.<
If you make use of this function, be sure that the footwell behind
the driver's seat is unobstructed before unlocking the vehicle. If you fail to do so, any persons or objects behind the seat could be injured or damaged by a rearward movement of the seat.<
Passenger-side exterior mirror tilt function Automatic curb monitor
Activating:
1. Select the driver's mirror with the mirror selection switch
2. When you engage reverse gear or selector-lever position R, the exterior mirror glass on the front passenger side tilts downward slightly. This allows the driver to see the area immediately adjacent to the vehicle such as a curb when parking, etc.
Deactivating:
Slide the mirror selection switch to the passenger's side position.
5 3
0 u s2
1 4
52nHeated seats* Steering wheel
Front The seat cushion and backrest can be heated when the ignition key is in posi- tion 2.
You can call up different heating modes by repeatedly pressing the button.
You can also switch off the higher heat- ing modes directly: Press the button and hold it slightly longer.
5 3
0 d
e 4
1 7
Rear The operating concept is the same as for the front heated seats. You can select between two heating modes.
5 3 0
d e 2 3
4
Adjustments The steering wheel can be moved in any of four directions. Adjust the steer- ing wheel by moving the control lever in the desired direction.
Do not adjust the steering wheel while the vehicle is moving. There
is a risk of accident from unexpected movement.<
To store the steering wheel setting, refer to Seat, mirror and steering wheel memory on page 50.
5 3
0 d
e 2
5 5
53n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Steering wheel Steering wheel heater* Mirrors
Automatic steering wheel adjustment only in conjunction with seat, mirror and steering wheel memory
In order to make it easier to get into and out of the vehicle, the steering wheel automatically moves into the top posi- tion and returns to the driving or mem- ory position.
This automatic feature is influenced by the position of the ignition key and by the driver's door. The steering wheel heater functions in
ignition key position 2.
Press the button to activate or deacti- vate this system.
The LED in the button lights up when the steering wheel heater is switched on.
If your vehicle is not equipped with steering wheel heater, the button for the recirculated-air mode is located here, refer to page 23.
5 3
0 d
e 4
2 8
Exterior mirrors The mirror on the passenger's side is more curved than the
driver's mirror. Objects reflected in the mirror are closer than they appear. Do not attempt to estimate the distance to following traffic based on the view in the mirrors, as otherwise an increased accident risk will result.<
54nMirrors
1 Adjustments
2 Switching to the other mirror or to the automatic parking function*
3 Folding mirrors in and out* To store the mirror settings, refer to Seat, mirror and steering wheel memory on page 50.
Adjusting manually The mirrors can also be adjusted manu- ally by pressing the edges of the mirror glass.
5 3
0 d
e 2
5 6
Folding mirrors in and out Pressing button 3 allows you to fold mirrors in and out up to a speed of 6 mph/10 km/h. This is advantageous, for example, in narrow streets or for bringing mirrors that have been manu- ally folded-in back into the correct posi- tion.
Before going through a car wash, fold the exterior mirrors inward
manually or using button 3; otherwise they could be damaged, depending on the width of the car wash system.<
Automatic heating Below a certain outdoor temperature, both exterior mirrors are automatically heated when the motor is running or the ignition is switched on.
Interior rearview mirror To reduce glare from vehicles behind you when you are driving at night, tilt the mirror by turning the button.
5 3
0 u s2
4 4
55n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Airbags
1 Front airbags
2 Head airbags
3 Side airbags for front and rear*
Protective action Comply with the instructions on page 43. Failure to do so could
result in diminished personal safety.<
The front airbags supplement the safety belts by helping to provide additional protection for the front-seat occupants in the event of a severe frontal impact in which the protection afforded by the safety belts alone may no longer be suf- ficient. The head airbag and side airbag help provide protection in the event of a side impact. The respective side airbag is designed to help support the body at
5 3
0 u s0
3 5
the side of the chest region. The Side Impact Head Protection System pro- tects the head.
The airbags are intentionally not trig- gered in every impact situation, e.g. not in minor accidents or rear-end colli- sions.
Stickers on the rear door frame indicate the status of the rear side
airbags. If the status cannot be clearly recognized, or if you want to have the airbags activated/deactivated, please contact your BMW Sports Activity Vehi- cle center.<
For information on the correct sitting position, refer to page 43.
Do not apply adhesive materials to the cover panels of the airbags,
cover them or modify them in any other way. Do not attempt to remove the airbag restraint system from the vehicle. Do not modify or tamper with either the wiring or the individual components in the airbag system. These include the padded steering wheel hub, the instru- ment cluster, the side trim panels, the doors and the roof pillars or the sides of the headliner. Do not remove or dis-
mantle the steering wheel yourself. Do not touch the individual components directly after the system has been trig- gered, otherwise there is a danger of burns. If the airbag restraint system malfunctions, needs to be decommis- sioned, or has been triggered, only entrust the necessary repair work to a BMW Sports Activity Vehicle center or a workshop that works according to BMW repair procedures with corre- spondingly trained personnel and has the required explosives permits for test- ing, repair, dismantling or scrapping of the airbag generators. Unprofessional attempts to service the system could lead to failure in an emergency or undesired airbag activation, either of which could result in personal injury.<
Warnings and information on the air- bags is also provided on the sun visors.
56nAirbags
Automatically deactivating front passenger airbags The occupation of the seat is detected by evaluating the imprint on the occu- pied seat surface of the front passenger seat. The front and side airbag on the front passenger side are activated or deactivated accordingly by the system.
The current status of the front passenger airbag, i.e. deactivated
or activated, is indicated by the indica- tor lamp over the interior rearview mir- ror, refer to Status of front passenger airbags in the following.<
Before transporting a child on the front passenger seat, observe the
safety information and handling instruc- tions under Transporting children safely, refer to page 57. The front and side airbag on the front passenger side can be deactivated for teenagers and adults in certain seat positions; then the indicator lamp for the front passenger airbags lights up. In these cases, change the seat position so that the front passenger airbags are activated and the indicator lamp goes out. If the desired status cannot be pro- duced by changing the seat position, transport the corresponding person on
the rear seat. Do not install protective covers, seat cushions, ball mats or other objects on the front passenger seat which are not specially recom- mended by BMW. Do not lay objects under the seat which could press against the seat from below. Otherwise a correct evaluation of the occupied seat surface cannot be ensured.<
Status of front passenger airbag One of the illustrated indicator lamps is located above the interior rearview mir- ror.
The indicator lamp for the front passen- ger airbags indicates the operating sta- tus of the front and side airbag on the front passenger side depending on the seat occupation. The indicator lamp shows whether the front passenger air- bags are activated or deactivated.
>The indicator lamp lights up when a child in a child restraint system intended for the purpose is properly detected on the seat. The front and side airbag on the front passenger side are not activated
5 3
0 u e 2
6 0
57n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Airbags Transporting children safely
>The indicator lamp does not light up when, for example, a correctly seated person of sufficient height is detected on the seat. The front and side airbag on the front passenger side are acti- vated
>The indicator lamp does not light up when the seat is empty. The front and side airbag on the front passenger side are not activated.
Operational readiness of airbag system
As of ignition key position 1, the warning lamp in the instrument cluster lights up for a short time,
thus indicating the operational readi- ness of the entire airbag system and the safety belt tensioners.
Airbag system malfunction:
>Warning lamp does not light up as of ignition key position 1
>Warning lamp lights up continuously.
Have the airbag system checked immediately if a malfunction
occurs, as otherwise there is a danger of the system failing to respond in the expected manner in an accident of cor- responding severity.<
The right place for children Do not leave children unattended in the vehicle, as otherwise they
could endanger themselves and other persons, e.g. by opening the doors.<
In principle, all seats in your BMW except the driver's seat are suitable for mounting universal child restraint sys- tems for all ages which are approved for the respective age group.
Children always in the rear:
Accident research shows that the saf- est place for children is on the back seat.
Only transport children under 13 years of age or less than 5 ft/
150 cm tall in the rear in child restraint systems intended for the respective age, weight and height of the child. Otherwise there is an increased danger of injury in an accident.<
Children 13 years of age or older must wear a safety belt as soon as a suitable child restraint system can no longer be used due to their age, size and weight.
All rear seat positions in your vehicle comply with the recommendations of the standard SAE J1819 for the safe securing of child restraint systems in motor vehicles.
Exception for front passenger seat:
Should it be necessary to use a child-restraint system on the front
passenger seat, the front and side air- bags must be deactivated. Otherwise, there is an increased risk of injury for the child when the airbags are trig- gered, even with a child-restraint sys- tem. Your BMW Sports Activity Vehicle center will be happy to advise you.<
More information on automatic deacti- vation of the front passenger airbags, refer to page 56.
58nTransporting children safely
Installing child-restraint systems Follow the child-restraint system manufacturer's instructions when
selecting, installing and using child- restraint systems. Otherwise the degree of protection can be reduced.<
Commercially available child restraint systems are designed for securing with a lap belt or with the lap belt section of a three-point belt. Incorrectly or improperly installed child restraint sys- tems can increase the risk of injury for children. Always follow the instructions for installing the system exactly.
On front passenger seat:
Before mounting a child restraint system on the front passenger
seat, make sure that the front and side airbag on the front passenger side are deactivated, as otherwise there is an increased risk of injury if the airbags are triggered.<
Before mounting a universal child- restraint system, move the front pas- senger seat into the highest position to achieve the best possible belt routing. Do not change this seat height.
Child-restraint system security All rear safety belts and the safety belt for the front passenger can be locked to prevent them from being pulled out, enabling them to be used for securing child restraint systems.
Locking safety belt:
1. Secure child restraint system with the belt
2. Pull out belt webbing completely 3. Allow belt webbing to be pulled in
and pull taut against child restraint system. The safety belt is locked.
Unlocking safety belt:
1. Open belt buckle 2. Remove child restraint system 3. Allow belt webbing to be pulled in
completely
5 3
0 u s1
0 4
Child restraint system with tether strap There are three additional mounting points for child restraint systems with a tether strap, refer to arrows.
5 3
0 u s0
3 7
59n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Transporting children safely
The illustration shows the fastening of the tether strap for the outer seats.
5 3
0 u e 2
5 7
The illustration shows the fastening of the tether strap for the middle seat.
Routing of the tether strap:
1. Push head restraint upward 2. Guide securing strap through head
restraint bracket 3. Slide the head restraint into the bot-
tom position.
When using the cargo area roll-up cover, also route the tether strap between the rear backrest and the cas- ing of the roll-up cover.
5 3
0 u e 2
5 6
LATCH child-restraint fixing system LATCH: Lower Anchor and Tethers for CHildren.
To attach a LATCH child's seat, follow the operating and safety
instructions of the system manufac- turer.<
The rear outer seating positions are provided with anchors for a LATCH child-restraint fixing system.
The illustration shows the left rear seat as an example. The mounts for attach- ment of the LATCH child-restraint fixing system are located behind the cover panels.
5 3
0 u s2
5 5
60nTransporting children safely
Remove cover panels by pulling them toward the front. To remount, simply slide into place.
On trips If the rear is equipped with side airbags, make sure that children
do not lean out of the child's seat towards the door panels. Otherwise severe injuries can be caused if the side airbags are triggered.<
Child-safety locks of rear doors:
Slide down the safety lever on the rear doors:
The door can now be opened from the outside only.
Safety switch for power windows:
Always press the safety switch for the power windows, refer to page 40, when children are riding in the rear of the vehicle.
5 3
0 d
e 2
2 6
61n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Vehicle Memory, Key Memory
How the system functions You have probably frequently wished that you could configure individual functions of your vehicle meet your own personal requirements. In developing your vehicle, BMW has included several user-defined functions in the vehicle's design. Your BMW Sports Activity Vehi- cle center can make these settings for you.
There are vehicle and person-related adjustments: Vehicle Memory and Key Memory. You can have up to four differ- ent basic positions configured for four different persons. The only requirement is that each person uses his or her own remote control key.
When your vehicle is unlocked with the remote control, the vehicle recognizes the individual user by means of a data exchange with the key, and makes adjustments accordingly.
In order for you to distinguish between the master keys with remote control, color-coded decals are supplied together with the keys.
What the system can do Your BMW Sports Activity Vehicle cen- ter can provide you with details on the capabilities of the Vehicle Memory and Key Memory systems.
You will see this symbol through- out the Owner's Manual. It is to
remind you at appropriate places of the settings that are available to you.<
Following configuration of the memory functions, vehicle opera-
tion may differ from the description in the Owner's Manual. Should you want to sell your BMW some day, please remember to have the memory func- tions reset to the default state.<
Examples for Vehicle Memory:
>Various signals that can serve as acknowledgment for locking and unlocking the vehicle, refer to pages 31, 33
>Deactivating/activating the Pathway lighting function, refer to page 100.
Examples for Key Memory:
>Automatic adjustment of the driver's seat, exterior mirror and steering wheel with settings stored in the memory for the individual driver when the vehicle is unlocked, refer to page 51
>Calling up customized settings for the automatic climate control when unlocking the vehicle, refer to page 109.
62nIgnition lock Starting engine
Ignition key positions 0 Steering lock engaged
1 Steering lock disengaged
2 Ignition on
3 Starting engine
Steering lock engaged The key can only be inserted or removed in this position.
After removing the key, turn the steer- ing wheel slightly to the left or right until you hear the lock engage.
If the key is not removed, an acoustic signal sounds after the driver's door is opened.
3 9
0 d
e 0
1 0
Automatic transmission: Only move the selector lever from
position P with the engine running. To turn the key back to position 0 or to remove it, first place the selector lever in position P: interlock.<
Steering lock disengaged Slightly moving the steering often makes it easier to turn the key from 0 to 1. Individual electrical devices are ready for operation.
Starting engine Manual transmission: Depress the clutch when starting
the engine. If you do not, a lock pre- vents the engine from starting.<
Before starting >Engage the handbrake >Be sure that the gearshift lever is in
Neutral or the selector lever in Park if the vehicle is equipped with an auto- matic transmission
>Depress the clutch. If the clutch is not depressed, the engine cannot be started
>Press the footbrake with an auto- matic transmission.
Do not run the engine in closed rooms, otherwise the inhalation of
toxic exhaust gases can cause uncon- sciousness and death. The exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Never leave an unattended vehicle with the engine running, as such a vehicle represents a potential safety hazard. To prevent the vehicle from rolling, always select neutral or the position P and engage the handbrake before leav- ing the vehicle with the engine run- ning.<
When starting the engine, do not press the accelerator pedal.
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
63nStarting engine Switching off engine
Do not allow the engine to warm up by leaving it running while the vehicle remains stationary. Instead, begin to drive immediately at a moderate engine speed.
X5 3.0i: Do not end the starting procedure too soon, but do not continue for longer than approx. 20 seconds. Release the ignition key immediately as soon as the engine starts. X5 4.4i, 4.8is: Your BMW is equipped with the conve- nience starting feature. With this fea- ture, it is sufficient to turn the ignition key only briefly to position 3 'Start engine' and to let go of it right away. The starter actuation continues to oper- ate automatically for a certain period of time and is stopped automatically as soon as the engine has started. The automatic starting mode will not operate or will be canceled if the bat- tery voltage is insufficient. The engine can be jump started, refer to page 174.
Should the engine fail to start on the first attempt, if it is very hot or cold, for instance:
>Press the accelerator pedal halfway down while engaging the starter.
Cold starts at altitudes above 3,300 ft/ 1,000 meters and at very low tempera- tures, from approx. +57/156:
>For the initial starting attempt, allow the starter to remain engaged some- what longer, approx. 10 seconds.
Engine idle speed is controlled by the engine computer system. Increased speeds at startup are normal and should decrease as the engine warms up. If engine speed does not decrease, service is required.
To prevent the battery from being drained, always switch off electrical devices that are not in use. Switch the ignition off when the vehicle is not being driven.
Extended starting attempts, char- acterized by excessively frequent
or long periods with the starter engaged, can lead to damage of the catalytic converter.<
Manual transmission:
1. Turn the ignition key to position 1 or 0
2. Shift into first gear or reverse.
Automatic transmission:
1. Shift into selector lever position P 2. Turn the ignition key to position 1
or 0.
Do not remove the ignition key when the vehicle is moving, other-
wise, the steering could lock. When leaving the vehicle, always remove the ignition key and lock the steering. Manual transmission: Always engage the handbrake when parking on slopes and inclined sur- faces. Even placing the gearshift lever in 1st gear or reverse may not provide adequate resistance to rolling. Automatic transmission: Place the selector lever in the P posi- tion.<
Automatic transmission:
The vehicle must be stationary and the selector lever in Park before you can remove the ignition key.
64nHandbrake Manual transmission
The handbrake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels.
Engaging The lever engages automatically when you pull it up and the indicator lamp comes on in the instrument cluster in ignition key position 2, refer to pages 19, 21.
Releasing Pull up slightly on the lever, press the button and lower the lever.
5 3
0 d
e 2
6 2
If exceptional circumstances should make it necessary to
engage the handbrake while the vehicle is in motion, do not pull it too strongly. In doing so, continuously press the but- ton of the handbrake lever. Otherwise strong application of the handbrake can lead to overbraking of the rear axle and associated 'fishtailing' of the vehicle rear end. Manual transmission: Always engage the handbrake when parking on slopes and inclined sur- faces. Even placing the gearshift lever in 1st gear or reverse may not provide adequate resistance to rolling. Automatic transmission: Place the selector lever in Park.<
To prevent corrosion and one- sided braking action, occasionally
apply the handbrake lightly when the vehicle is slowly coming to a stop if the traffic conditions are suitable. The brake lamps do not light up when the handbrake is applied.
Press the clutch all the way down each time you shift, pressing the gearshift lever into its proper end position.
Depress the clutch when starting the vehicle, too. If the clutch is not depressed, the interlock will prevent the engine from starting.
While shifting in the 5th/6th gear slot, press the gearshift lever
toward the right, otherwise, accidental shifting into the 3rd or 4th gear could result in engine damage.<
3 8
0 d
e 0
4 4
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
65nManual transmission Automatic transmission with Steptronic*
Reverse Select only when the vehicle is station- ary. Press the gearshift lever to the left to overcome the resistance.
As you do this, the backup lamps will turn on automatically when the ignition key is in position 2.
In addition to fully automatic operation, you can also manually shift with the Steptronic, refer to page 67.
Under normal operating conditions, fuel consumption is lowest when driving in position D.
5 3
0 u s2
3 8
Selector lever positions P R N D M/S
The transmission range display varies in accordance with the equipment of your vehicle.
Starting engine The engine can only be started in the selector lever position Park or Neutral.
5 3
0 u s2
3 9
66n Automatic transmission with Steptronic*
Range selection >The selector lever can be moved out
of the P position with the ignition switched on or the engine running: interlock
>With the vehicle stationary, press the footbrake before shifting out of P or N, otherwise, the selector lever is blocked: shiftlock. Keep the brake pedal pressed down until you start off. The vehicle will oth- erwise creep when a drive position is engaged. A lock prevents accidentally shifting
into the selector lever positions R and P. To deactivate the lock, press the button on the front of the selector lever knob, refer to arrow.
P Park Select only when the vehicle is station- ary. The transmission locks to prevent the rear wheels from turning.
R Reverse Select only when the vehicle is station- ary.
N Neutral, idle For example, engage in automatic car washes. The vehicle can roll.
5 3
0 d
e 2
6 3
D Drive, automatic driving position This position is designed for driving under all normal operating conditions. All forward gears are available.
Kick-down The kick-down mode provides maxi- mum acceleration. Depress the accelerator pedal past the increased resistance point at the full- throttle position.
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
67nAutomatic transmission with Steptronic*
Sport Program and manual operation M/S Shift selector lever from position D toward the left into the shifting slot M/S: the Sport Program is activated and DS appears in the instrument cluster. This position is recommended for a perfor- mance-oriented driving style.
Briefly pressing the selector lever toward the front or rear activates man- ual operation and Steptronic changes gears. The following display appears in the instrument cluster, depending on the model:
>1 to 5 or 1 to 6 >M1 to M5 or M1 to M6.
5 3
0 d
e 2
6 4
Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected will appear briefly in the instrument cluster and then the current gear will reappear.
To return to automatic mode, move the selector lever toward the right into posi- tion D.
Malfunction The warning lamp lights up or the message TRANS.FAILSAFE PROG appears in the Check
Control. A malfunction has occurred in the transmission system. Avoid heavy loads.
Bring the vehicle to a stop. Move the transmission selector lever to P. Set the parking brake and switch the engine off by turning the ignition key to position 0.
Wait a few seconds, then start the engine. If the indicator lamp goes out after a few seconds, normal transmission per- formance has been restored. You may continue to drive as usual. If the indica- tor lamp does not go out, you can place the selector lever in all positions, but the vehicle will now only drive forward with limited gear selection. Have the system checked as soon as possible.
Information on jump starting, tow- starting and towing begins on page 174.
68n Turn signals/headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
Signaling briefly Press lever to resistance point and hold for as long as you wish to signal.
Atypically rapid flashing of the turn signal light indicates the failure of
a turn signal lamp and when towing a trailer, may indicate the failure of one of the trailer's turn signal lamps.<
5 3
0 d
e 2
6 5
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
69nWasher/wiper system/rain sensor*
0 Wipers retracted
1 Intermittent mode or rain sensor
2 Normal wipe
3 Fast wipe
4 Brief wipe
5 Windshield washing
6 Special wash program* 7 Knurled wheel for control of the wipe
interval or the sensitivity of the rain sensor
5 3
0 d
e 3
2 4
Fold-out position The left wiper is partially concealed by the hood. To bring the wipers to roughly a vertical position, which is important when changing the wiper blades or when folding the wipers out during frosty weather, for example, proceed as follows:
>With the lever in position 1, switch off the ignition as soon as the wipers come to a stop.
If equipped with a rain sensor:
1. Switch on the wipers with the lever in position 1, 2 or 4
2. When the wipers are roughly vertical, switch the ignition off.
For changing the wiper blades, refer to page 160.
Fold the wipers back down onto the windshield before you turn the
ignition key to position 1 or 2 again. If you do not, they could be damaged.<
Intermittent mode Not provided in vehicles with rain sen- sor.
You can set the wipe interval to four stages with the knurled wheel 7. In addition, the wipe interval is varied automatically depending on road speed.
Rain sensor The rain sensor automatically controls the wiper operation as a function of the rain intensity. It is located on the wind- shield, directly in front of the interior rearview mirror.
To activate the rain sensor: Move the lever to position 1 as of igni- tion key position 1. The wipers travel once across the windshield, regardless of the weather conditions.
You can leave the lever permanently in position 1. It is then only necessary to activate the rain sensor as of ignition key position 1. To do this, turn the knurled wheel 7 briefly.
70nWasher/wiper system/rain sensor*
To adjust the sensitivity of the rain sensor: Turn the knurled wheel 7.
To deactivate the rain sensor: Move the lever to position 0.
Deactivate the rain sensor when passing through an automatic car
wash. Failure to do so could result in damage caused by undesired wiper activation.<
Normal wipe The system switches automatically to intermittent mode when the vehicle is stationary, not on vehicles with rain sensor.
Fast wipe The wipers operate at normal speed when the vehicle is not moving, not on vehicles with rain sensor.
Windshield washing The system sprays washer fluid against the windshield and activates the wipers for a brief period.
Special wash program* As with 5; several additional wash cycles are carried out and the head- lamps are cleaned*. This program is recommended after you have driven on extremely dirty roads.
Headlamp washing* >With the special wash program 6 >At appropriate intervals, the head-
lamps will also be cleaned upon actu- ation of the windshield washer func- tion 5 while the vehicle's headlamps are switched on.
Do not use the washers if there is any danger that the fluid will
freeze on the windshield. If you do so, your vision could be obscured. Use antifreeze to prevent this, refer to page 152. Do not actuate washer systems when the fluid reservoir is empty, otherwise, the washer pump will be damaged.<
Windshield washer nozzles The windshield washer jets are heated automatically when the ignition key is in position 2.
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
71nWasher/wiper system/rain sensor* Cruise control*
Rear window wiper 0 Retracted position of the rear window
wiper
1 Rear window wiper in intermittent mode. When the transmission is shifted into reverse, continuous rear wiper operation is switched on auto- matically
2 Cleaning rear window
You can also program the interval:
>Switch briefly from position 0 to posi- tion 1
>Wait the desired interval time and then switch from position 0 to 1 again to establish the programmed inter- val; max. 30 seconds.
5 3
0 d
e 2
6 6
Programming is deleted:
>approximately 10 seconds after the lever is placed in position 0 or
>after the engine is switched off.
For changing the wiper blade, refer to page 160.
You can automatically maintain and store any desired vehicle speed above approx. 20 mph/30 km/h.
You can use cruise control whenever the system is active while the engine is running.
On the sports steering wheel*, there are +/ buttons on the right side of the steering wheel for the cruise control.
Do not use the cruise control when unfavorable conditions do
not permit driving at constant speed. Otherwise you could lose control of the vehicle and cause an accident. These unfavorable conditions include winding roads, heavy traffic or poor road condi- tions, e.g. snow, rain, ice or a loose road surface.<
72nCruise control*
Activating system
As of ignition key position 2: Press the button; the indicator lamp in the instrument cluster comes on, refer to page 22. Cruise control is ready to use.
Deactivating system
Press the button repeatedly until the indicator lamp in the instrument cluster goes out.
The cruise control is also deactivated when the ignition key is turned to posi- tion 0.
The speed stored in the memory is deleted.
Maintaining and storing speed or accelerating
Briefly press button +: The system maintains and stores the current vehicle speed. Every time you briefly press the button, the speed increases by approx. 0.6 mph/1 km/h.
Press and hold button +: The vehicle accelerates without pres- sure on the accelerator pedal. When you release the button, the system maintains and stores the current speed.
On downhill grades, the controlled speed can be exceeded if the engine's braking action is insufficient. Speed can drop on uphill grades if the engine out- put is insufficient.
Deceleration
Briefly press button : When cruise control is active, every brief touch of the button reduces the speed by approx. 0.6 mph/1 km/h.
Press and hold button : With the cruise control active, the sys- tem automatically reduces the throttle opening to slow the vehicle. When you release the button, the system main- tains and stores the current speed.
Interrupting cruise control
When the system is activated, press button 1. The indicator lamp stays on. You can use the cruise control again whenever required by resuming the speed that was stored last.
In addition, cruise control is interrupted automatically:
>When you apply pressure to the brake pedal
>When you apply pressure to the clutch pedal or when you move the automatic transmission selector lever from Drive to Neutral
> If you exceed or fall below the con- trolled speed for an extended period, by depressing the accelerator, for example
>When DSC Dynamic Stability Control is active.
Resuming stored setting
Press the button: The vehicle accelerates to and main- tains the last speed stored.
73n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
1 Odometer
2 Trip odometer
3 Outside temperature display
Odometer You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster, refer to arrow.
The range of available displays varies according to your individual vehicle's equipment.
Trip odometer To reset the trip odometer to zero, press the button, refer to arrow, with the ignition key in position 1 or 2.
5 3
0 u s2
5 3
Outside temperature display The outside temperature appears on the display as of ignition key position 1.
You can change the units of measure 7/6 by
1. pressing and holding down the but- ton, refer to arrow, with the ignition key in position 1 and
2. then turning the ignition key to 0. At the same time the units of mea- surement in the temperature display of the automatic climate control will be changed, refer to page 107.
Refer also to page 80.
Outside temperature warning If the display drops to approx. +37.57/ +36, a signal sounds as a warning and the display flashes for a brief period. There is an increased danger of ice.
Even at temperatures above +37.57/+36 ice can form.
Therefore, drive carefully, e.g. on bridges and sections of road in the shade, as otherwise there is an increased accident risk.<
Odometer, outside temperature display
74nTachometer Energy control
X5 3.0i, 4.4i Do not operate the engine with the needle in the red overspeed zone of the gauge, refer to arrow.
In this range, the fuel supply is inter- rupted to protect the engine.
5 3
0 u s2
2 7
X5 4.8is The orange warning sector gradually moves upward as the engine warms to its normal operating temperature. As the engine temperature increases, an increasing number of sectors in this warning panel go out.
Avoid allowing the engine speed to rise as far as the orange warning sector whenever possible.
Do not operate the engine with the needle in the red overspeed zone of the gauge, refer to arrow.
In this range, the fuel supply is inter- rupted to protect the engine.
5 3
0 u s2
3 1
X5 3.0i, 4.4i Shows the current fuel consumption. This allows you to see whether your current driving style is conducive to fuel economy with minimum exhaust emis- sions.
3 9
0 u s0
0 5
75n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Engine oil temperature gauge Fuel gauge
X5 4.8is The general operating temperature lies between 1767/806 and 2487/ 1206. Do not exceed the maximum value of 3027/1506.
5 3
0 u s2
3 2
If the LED comes on and stays on, there are approx. >2.0 gal./8 liters, 6-cylinder engine >2.5 gal./10 liters, 8-cylinder engine of fuel still in the tank.
Tank capacity: approx. 24.6 gal./ 93 liters.
If the tilt of the vehicle varies, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly.
Refuel well before the tank is empty, otherwise engine functions
will not be ensured. Damage can occur if you drive down to the last drop.<
When you switch on the ignition, the LED lights up briefly to confirm that the system is operational.
3 9
0 u s0
0 6
76nCoolant temperature gauge Service Interval Display
Blue The engine is still cold. Drive at moder- ate engine and vehicle speeds.
Red When you switch on the ignition, the warning lamp* comes on briefly to con- firm that the system is operational.
If the warning lamp lights up during driving or the message COOLANT TEMPERATURE appears in the Check Control; the engine is overheated. Switch off the engine immediately and allow it to cool down.
Checking coolant level, refer to page 154.
3 9
0 d
e 0
0 7
Between blue and red zones Normal operating range. The dial may drift up to the red field.
The range of available displays varies according to your individual vehicle's equipment.
Green lamps The number of illuminated lamps decreases as the time for your next maintenance visit approaches.
Yellow lamp This field appears together with OILSERVICE or INSPECTION.
Maintenance is due. Please contact your BMW Sports Activity Vehicle cen- ter for an appointment.
Red lamp The maintenance deadline has been passed.
3 9
0 u s0
0 8
77n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Check Control
Graphic display* The following alerts or status messages are displayed with icons as of ignition key position 2 until the defects are cor- rected:
1 Check low beams
2 Add washer fluid, goes out after approx. 1 minute
3 Door open
4 Tailgate open
5 Check brake and tail lamps. A defec- tive center brake lamp is indicated by the upper symbol.
When you open the door after stopping, a warning signal sounds without a visual indicator for:
>LIGHTS ON >KEY IN IGNITION LOCK.
3 9
0 d
e 1
2 1
Alphanumeric display* Text messages are used to alert the driver to system malfunctions as of igni- tion key position 2. The alert is accom- panied by an acoustic signal.
1 Status messages symbol
2 Display
3 CHECK button
Messages concerning system defects are differentiated based on two priori- ties:
5 3
0 d
e 2
5 4
Priority 1
These defects are immediately indi- cated by an acoustic signal and a flash- ing warning symbol 1. Simultaneous defects will be displayed consecutively. These status messages remain on the display until the defects are corrected. They cannot be deleted by pressing the CHECK button 3:
>RELEASE PARKINGBRAKE >COOLANT TEMPERATURE
Temperature too high. Stop the vehi- cle immediately and switch off the engine, refer to pages 76 and 154
>STOP! ENGINE OILPRESS Oil pressure too low. Stop the vehicle immediately and switch off the engine, refer to pages 19 and 152
78nCheck Control
>CHECK BRAKE FLUID Level has dropped approx. to mini- mum. Have the brake fluid replen- ished as soon as possible, refer to page 155. Have the reason for the brake fluid loss eliminated by your BMW Sports Activity Vehicle center
>DSC/4x4 INACTIVE DSC and/or four-wheel drive system xDrive has failed. The stabilizing interventions of DSC and/or the four-wheel drive system xDrive are no longer available. Drive may be being exerted exclusively via the rear axle. Have the system checked at the nearest BMW Sports Activity Vehicle center. For additional information, refer to page 94
>SELFLEVEL SUSP.INACT* Please consult the nearest BMW Sports Activity Vehicle center
>SELFLEVEL SUSP.INACT* MAX. 35 MPH/MAX. 60 KM/H* These messages are displayed con- secutively. Do not exceed a maximum speed of 35 mph/60 km/h. Please consult the nearest BMW Sports Activity Vehicle center
>TRANSMISS'N OVERHEAT* Reduce speed immediately and stop at a suitable location so that the sys- tem can cool down again. Please contact the nearest BMW Sports Activity Vehicle center.
>LIMIT* Display when the programmed road- speed limit is exceeded, refer to page 85.
Priority 2
These displays appear for 20 seconds as of ignition key position 2. The warn- ing symbols remain after the message disappears. You can open the mes- sages again for display by pressing the CHECK button.
>TRUNKLID OPEN This message only appears when starting off
>DOOR OPEN This message appears after a minimal defined road speed has been exceeded
>FASTEN SEAT BELTS* In addition, the indicator lamp with the belt symbol lights up and an acoustic signal sounds
>WASHER FLUID LOW Too low, top up at the next opportu- nity, refer to page 152
>CHECK ENGINE OIL LEV The oil level is at the absolute mini- mum point. Therefore, have the engine oil replenished as soon as possible, refer to page 152. Until then, do not drive more than approx. 30 miles/50 km.
>CHECK GAS CAP Check to see whether the fuel filler cap has been closed properly, refer to page 25
>OUTSIDE TEMP. +237/56 This display is only an example. The current temperature is displayed at outside temperatures of +37.57/ +36 and below, refer also to page 73
>CHECK BRAKE LIGHTS A lamp has failed or the electrical circuit has a malfunction, refer to page 163 or consult a BMW Sports Activity Vehicle center
>CHECK LOWBEAM LIGHTS CHECK SIDE LIGHTS CHECK REAR LIGHTS CHECK FRONT FOGLAMPS CHECK LICPLATE LIGHT CHECK HIGHBEAM LIGHT CHECK BACK UP LIGHTS The respective lamp may have failed or the electrical circuit may be defec- tive, refer to page 161 or consult a BMW Sports Activity Vehicle center
79n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Check Control Computer
>TRANS. FAILSAFE PROG* Please consult the nearest BMW Sports Activity Vehicle center, refer to page 67
>CHECK BRAKE LININGS Have the brake pads inspected by your BMW Sports Activity Vehicle center, refer to page 140
>CHECK COOLANT LEVEL Coolant too low, top off at the next opportunity, refer to page 154
>ENGINE FAILSAFE PROG Fault in the engine electronics. You can continue to drive with reduced engine output or engine speed. Please have the system inspected by your BMW Sports Activity Vehicle center.
Displays after completion of trip All of the malfunctions registered during the trip appear consecutively when the ignition key is turned to position 0.
The following displays will appear when appropriate:
>LIGHTS ON >KEY IN IGNITION LOCK >CHECK ENGINE OIL LEV
Replenish engine oil at the next opportunity, e.g. while refueling, refer to page 152.
This display appears when you open the driver's door after parking the vehi- cle. A supplementary acoustic signal also sounds.
Status messages remain available with the CHECK button 3 for a period of approx. three minutes after the display goes out and the key is removed from the ignition lock. If there are multiple messages, press the CHECK button repeatedly to view them all in sequence.
Checking Check Control Press the CHECK button 3 with the ignition key in position 2: CHECK CONTROL OK appears on the display.
No malfunctions are present in the monitored systems.
Computer You can find a description of the com- puter below and on page 85 as well as in the Owner's Manual for Onboard Computer.
You can have the Check Control and computer messages dis-
played in a different language.<
Mode selection As of ignition key position 1, you can request information from the computer using the computer button in the turn signal lever.
A new function appears each time you briefly press the computer button.
The display sequence:
>Outside temperature >Average fuel consumption >Cruising range >Average speed.
As of ignition key position 1, the last active setting is displayed.
The range of available displays varies according to your individual vehicle's equipment.
5 3
0 d
e 2
2 8
80nComputer
Outside temperature and average fuel consumption You can change the units of measure 7/6 for the outside temperature dis- play by
1. pressing and holding the trip odome- ter reset button with the ignition key in position 1 and
2. then turning the ignition key to 0. At the same time the units of mea- surement in the temperature display of the automatic climate control will be changed, refer to page 107.
Refer also to page 73.
The average fuel consumption is calcu- lated for the time during which the engine is running.
3 9
0 u s1
2 6
Cruising range and average speed Displays the estimated cruising range available with the remaining fuel. The fuel level is measured and the range is calculated taking into account the driv- ing style over the last 20 miles/30 km.
Periods with the vehicle parked and the engine off are not included in the calcu- lations of average speed.
Canceling display You can hide the computer display by briefly pressing the button in the turn signal lever while the average speed is being displayed.
Restarting calculations If you continue to press the computer button in the turn signal lever, the aver- age values which were just displayed for fuel consumption and speed will be recalculated from that point. The engine must be running in order for this calcu- lation to be executed.
Computer with alphanumeric display* If your vehicle has Check Control with alphanumeric display, the system's computer is described beginning on page 85 and in the Owner's Manual for Onboard Computer.
81n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
MID Multi-Information Display
Central display The MID is used for centralized display and operation for the following onboard systems:
>Digital clock, e.g. time display, date >Audio systems: radio, cassette, CD >Computer, e.g. fuel consumption,
cruising range >Telephone, e.g. dialing
You will find notes and instructions for operating the digital clock and the com- puter on the following pages. Please refer to the separate Owner's Manuals for operating the audio systems, the telephone and the onboard computer.
Any unrealistic numerical entries will not be accepted.
All stored data will be lost if the power supply is interrupted. Time display, switch-on times for parked car ventila- tion, distance and cruise control speed limit may have to be reset once the power supply has been reestablished.<
1 Function button for audio systems
2 Function button for the telephone
3 LED for parked car ventilation > remains on if switch-on time is
active > flashes while operating
4 Function button for the digital clock and computer
5 Indicator display for the various onboard systems
3 9
0 u s7
0 5
6 Display for the entry and request but- tons. Depending on the operating mode, the functions and options that can be selected with the buttons are displayed here
7 Entry and request buttons for operat- ing the various onboard systems
82nDigital clock in MID
To avoid endangering yourself or other road users, only make
entries when the vehicle is stationary.<
Displaying time or date
Press the left side of the button.
Display shows:
You can have the time displayed in 12 or 24 hours.
To change the display:
Press the left side of the button.
If the 12-hour time display is in use, AM or PM appears after the time.
Changing time
Press the left side of the button.
Press the right side of the button: The dots flash on the display.
To change the setting:
Press the left/right side of the button, or hold the button down.
To store the entry:
Press the right side of the button.
Changing date
Press the left side of the button.
Press the button.
Press the right side of the button: The dots and the DATE display flash.
To change the setting:
Press the left/right side of the button, or hold the button down.
To store the entry:
Press the right side of the button.
The clock takes leap years into account and therefore does not have to be reset manually.
83n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Digital clock in MID
Reminder signal You can program a reminder signal memo to be heard every hour, so that you are sure not to miss a news broad- cast.
Press the left side of the button.
Press the button: MEMO OFF appears on the display for entry and request buttons, and the tone symbol will appear in the upper right of the display.
A signal is then heard 15 seconds before each hour.
Stopwatch
Press the left side of the button.
Press the button.
Display shows:
To start the stopwatch function:
Press the right side of the button.
To take an intermediate time reading:
Press the button.
Press the button: The stopwatch display can be seen counting up; the stopwatch continues to run.
To halt the stopwatch:
Press the right side of the button.
The stopwatch is halted when the ignition key is turned back to 0,
but starts to run again when the ignition key is turned to 1.<
84nDigital clock in MID
Entering switch-on times for parked car ventilation You can enter two different switch-on times. The ventilation will switch off automati- cally after 30 minutes.
Please follow the instructions for operating the parked car ventila-
tion that start on page 113.<
Press the left side of the button.
Press the left/right side of the button.
Display shows:
Press the right side of the button: Display flashes, e.g. TIMER 1.
To enter the time:
Press the left/right side of the button, or hold the button down.
To confirm the entry:
Press the right side of the button.
The activated time is marked with an asterisk.
The switch-on times remain stored until new entries are made.
You can change switch-on times that have already been stored by making a new time entry as described above.
When the switch-on time is active, the LED comes on in the MID. During actual operation of the ventilation, the LED flashes. The LED goes out when the system is switched off.
To activate/deactivate the time:
Press the button twice.
Switching parked car ventilation on and off directly
The parked car ventilation function can only be requested in ignition
key position 1.<
Press the left side of the button.
Press the button.
85n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Computer* in MID
To avoid endangering yourself or other road users, only make
entries when the vehicle is stationary.<
Computer calculations begin at the start of the journey. Information can also be called up on the display by the remote control, refer to page 89.
Speed limit Speed limit entry:
You can enter the road speed at which you wish to hear and see a reminder signal: a signal will sound, the word LIMIT will flash, and with the Check Control with alphanumeric display*, the speed limit warning stored in the mem- ory will appear on the instrument clus- ter briefly: limit.
The speed limit reminder is only repeated if road speed has fallen at least 3 mph/5 km/h below the preset speed limit since the last time the speed limit reminder was triggered.
Press the right side of the button.
Press the button.
Press the right side of the button.
Display shows:
Enter the limit by pressing the function buttons.
To correct an entry:
Press the left side of the button and repeat the entry.
To store the entry:
Press the right side of the button.
86nComputer* in MID
To adopt the current speed as the speed limit:
Press the right side of the button.
Press the button.
Press the right side of the button twice.
To deactivate the speed limit:
Press the right side of the button.
Press the button.
The LIMIT display goes out, but the stored value is not lost and can be reactivated by pressing the LIMIT but- ton.
Distance to destination The remaining distance to the destina- tion will be displayed on the screen. Enter the entire distance before starting the journey.
To enter:
Press the right side of the button.
Press the left side of the button.
Press the right side of the button.
Display shows:
You can enter the distance by pressing the function buttons.
To correct an entry:
Press the left side of the button and repeat the entry.
To store the entry:
Press the right side of the button.
To check a stored value:
Press the right side of the button.
Press the left side of the button.
87n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Computer* in MID
Estimated time of arrival When you have entered the distance to your destination, you can obtain an esti- mated time of arrival display that is con- tinuously updated by the computer as your average driving period varies.
Press the right side of the button.
Press the right side of the button: The estimated time of arrival is dis- played.
Cruising range The distance that the vehicle should cover on the remaining fuel in the tank is displayed.
Press the right side of the button.
Press the button: The display shows the probable range.
Always refuel as soon as possible once your cruising range falls to
below 30 miles/50 km, otherwise engine functions are not ensured and damage can occur.<
The computer will only register fuel amounts over 1.8 gal/6 liters.
Fuel consumption You can have the average fuel con- sumption displayed for two different distances, for example a complete jour- ney and part of the journey.
To start the calculation, select the func- tion with the engine running:
Press the right side of the button.
Press the left or right side of the button: The display will show the average fuel consumption.
To restart the fuel consumption calcula- tion:
Press the left or right side of the button.
Press the right side of the button.
88nComputer* in MID
Speed You can open a display of the vehicle's average speed.
To start the calculation, select the func- tion with the engine running:
Press the right side of the button.
Press the button: The display shows the average speed.
To recalculate the speed:
Press the right side of the button.
Extended immobilizer function You can establish a code that will pre- vent the engine from being started unless the code is entered.
If you do not have access to the code, the emergency deactivation procedure will have to be carried out, refer to next page.
To establish and activate the code:
Press the right side of the button.
Press the left side of the button.
Display shows:
Enter the code with the function but- tons.
To correct an entry:
Press the left side of the button and repeat the entry.
To store the entry:
Press the right side of the button. Turn the ignition key to position 0.
To deactivate the code:
When you are asked to enter the code with the ignition key in position 1 or 2:
>Enter the code at the function but- tons.
Press the right side of the button.
After the code has been entered cor- rectly and confirmed with the SET but- ton, the time display appears.
89n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Computer* in MID
After three incorrect code entries, or three attempts to start the engine with- out a code entry, the alarm will sound for 30 seconds on vehicles fitted with an alarm system.
Deactivating the alarm in an emer- gency:
If you have forgotten the code, proceed as follows:
1. Disconnect the battery, wait approx. 2 minutes, then reconnect it. Note that on vehicles with an alarm sys- tem, the alarm will sound
2. Set the ignition key to position 1: the time display will count down for the next ten minutes
3. After ten minutes, start the engine.
If the code becomes available again in the meantime, it can be
entered during the waiting period after pressing the CODE button.<
Remote control The computer button on the turn signal lever can be used to select the items of computer information to be displayed.
To do this, press:
> the button on the lever until PROG shows on the display
> the MID buttons in the order in which you wish the information to be dis- played. Each time an entry is stored, the pro- gram number appears on the display.
To terminate the selection procedure:
Press the right side of the button.
5 3
0 d
e 2
2 8
To have all the available information displayed, press > the button on the lever until PROG
shows on the display > the SET button.
To obtain individual items of informa- tion, briefly press the button as often as necessary.
90nPDC Park Distance Control*
The concept PDC provides extra safety and conve- nience during parking maneuvers. Sig- nal tones indicate the current distance to an object behind or in front of your vehicle. To do this, four ultrasonic sen- sors in the front and rear bumpers each measure the distance to the nearest object. The detection range of the front sensors and the two sensors located at the ends of the rear bumper is approx. 2 ft/60 cm, while the rear center sen- sors can detect objects up to a distance of approx. 5 ft/1.50 m.
PDC is a parking aid that can indicate objects when they are
approached slowly, as is usually the case when parking. Avoid approaching objects too quickly; otherwise the phys- ical circumstances may cause the sys- tem to issue the warning too late.<
Automatic operation When the engine is running or the igni- tion is switched on, the PDC system starts to operate automatically approx. one second after you shift into reverse or move the selector lever into the R position. Wait this short period before backing up.
Manual activation Press the button; the LED lights up.
Manual deactivation Press the button again; the LED goes out.
Automatic deactivation After driving a distance of more than approx. 95 ft/30 m or exceeding a speed of approx. 20 mph/30 km/h, the system switches off and the LED goes out. You may switch the system on again manually as needed.
5 3
0 d
e 4
1 8
91n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
PDC Park Distance Control* Antilock Brake System
Signal tones The distance from an object is indicated in front with a higher intermittent tone, and at the rear with a lower intermittent tone. As the distance between vehicle and object decreases, the intervals between the tones become shorter. The signal tone becomes continuous once the distance to the nearest object falls to below roughly 1 ft/30 cm.
The warning signal is canceled after approx. 3 seconds if you are moving parallel to a wall.
Malfunctions The LED flashes and a short steady sig- nal tone is sounded
> if you activate PDC with the button >when you select reverse for the first
time after switching on the ignition > if a malfunction occurs while the PDC
system is active.
Switch the system off and have the cause of the malfunction corrected by your BMW Sports Activity Vehicle cen- ter.
System limits Even with PDC, final responsibility for estimating the distance
between the vehicle and any obstruc- tions always remains with the driver. Even when sensors are involved, there is a blind spot in which objects cannot be detected. This applies especially in those cases where the system approaches the physical constraints of ultrasonic measurement, as occurs with tow bars and trailer couplings, and in the vicinity of thin or wedge-shaped objects. It is also possible that low objects already displayed, such as curb edges, may come into the blind spot of the sensors before a continuous signal sounds or that higher, protruding objects, such as ledges, will not be detected. Loud sources of sound, inside and out- side the vehicle, could drown out the PDC signal tone.<
Keep the sensors clean and free of ice or snow in order to ensure
that they will continue to operate effec- tively. When using high-pressure washers, do not spray sensors for long periods and keep the sprayer at least 4 in/10 cm away from the sensors.<
The concept The ABS Antilock Brake System pre- vents the wheel brakes from locking during braking. Safe steering response is maintained even during full braking. This increases active safety.
The ABS is operational every time you start the engine. Safe braking, refer to page 140.
EBV Electronic brake-force distribution EBV controls the brake system's appli- cation pressure at the rear wheels to ensure stable deceleration.
DBC Dynamic Brake Control When the brake pedal is depressed rapidly, this system automatically gen- erates a maximum boost of braking force and thus aids in keeping braking distances as short as possible during full braking. This system exploits all of the benefits provided by ABS.
Do not reduce the pressure on the brake pedal for the duration of the brake application. DBC is deactivated when you release the brake pedal.
92nAntilock Brake System DSC Dynamic Stability Control
Malfunctions Please be absolutely sure to follow instructions regarding possible combi- nations of indicator lights on page 20.
The concept DSC prevents the drive wheels from slipping when starting off and acceler- ating. DSC also identifies unstable driv- ing conditions, such as a loss of trac- tion at the rear of the vehicle or sliding of the vehicle in its front wheels. Under these circumstances, DSC helps the vehicle maintain a safe course within the physical limits by reducing the engine output and by applying the brakes in the individual wheels.
The DSC is operational every time you start the engine.
The laws of physics cannot be repealed, even with DSC. An
appropriate driving style always remains the responsibility of the driver. So please do not further limit the addi- tional safety margin by taking unneces- sary risks.<
Indicator lamp The indicator lamp in the instru- ment cluster goes out shortly after the engine is started.
The indicator lamp flashes: DSC is active and is regulating drive and braking force.
The indicator lamp stays lit: DSC has been switched off using the button and the stabilizing interventions are no longer available.
93n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
DSC Dynamic Stability Control
Switching DSC off Press the button; the indicator lamp comes on and stays on.
Stabilizing interventions of the chassis control system DSC are no longer avail- able. However, the braking interven- tions that simulate the function of the differential lock continue to be active.
In the following exceptional circum- stances, it may be effective to switch off the DSC for a short period:
>When rocking a stuck vehicle free and when starting off in deep snow or on loose road surfaces
>On sandy road surfaces >On poor surfaces with deep ruts
5 3
0 d
e 4
1 4
> If the wheels churn on muddy sur- faces
>When driving with snow chains.
When the DSC system is switched off, braking maneuvers may sub-
ject the brakes to additional loads. Automatic limitation of braking action may briefly occur in order to limit brake temperatures. To maintain vehicle stability, always drive with the system switched on when possible.< Switching DSC on
Press the button a second time the indicator lamp goes out. DSC is now activated.
Malfunctions Please be sure to read the information on the DSC Dynamic Stability Control/ xDrive warning lamp on page 22 and on the possible lamp combinations that can light up on page 20.
5 3
0 d
e 4
1 4
94nxDrive HDC Hill Descent Control
xDrive is the 4-wheel drive system of your X5. The combined effects of xDrive and DSC further optimize the traction and dynamic driving characteristics. The 4-wheel drive system xDrive vari- ably distributes the drive torque to the front and rear axle depending on the driving situation and prevailing road conditions.
Malfunctions Please be sure to read the information on the DSC Dynamic Stability Control/ xDrive warning lamp on page 22 and on the possible lamp combinations that can light up on page 20.
The concept HDC is a system for driving downhill in steep terrain. This system reduces vehi- cle speed on steep downhill gradients, thus allowing you to maintain even bet- ter control of your BMW under these conditions. The vehicle moves at slightly more than walking speed without active interven- tion from the driver.
HDC is available for activation at vehi- cle speeds below approx. 20 mph/ 35 km/h. When driving down steep hills with a speed below approx. 20 mph/ 35 km/h, the vehicle reduces speed automatically down to slightly more than walking speed, approx. 5 mph/ 8 km/h, and then maintains this speed at a constant.
You can use the accelerator or brakes to vary this automatically controlled speed within a range extending from approx. 3 mph/5 km/h to 15 mph/ 25 km/h. You can specify a target speed within the same range by using the +/ but- tons of the cruise control.
HDC is automatically deactivated once vehicle speed again exceeds approx. 35 mph/60 km/h.
Activating system Press the button; the LED lights up.
The LED flashes when the brakes are applied automatically.
Deactivating system Press the button again; the LED goes out.
HDC is deactivated automatically above a road speed of approx. 35 mph/ 60 km/h and when the ignition is switched off.
5 3
0 d
e 4
1 6
95n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
HDC Hill Descent Control Self-leveling suspension*
Using HDC With manual transmission: Use HDC in first gear and in Reverse since the engine's braking action is diminished in the higher gears.
With automatic transmission: You can use HDC in every drive posi- tion.
In case of a malfunction If the LED in the button goes out during HDC operation or does not light up when the HDC is activated: HDC is temporarily unavailable due to excessive brake temperature.
The warning lamp for the self- leveling suspension comes on, or the message SELFLEVEL
SUSP.INACT appears in the Check Control: there is a malfunction in the self-leveling suspension.
Stop and inspect the vehicle. If the rear of the vehicle is visibly lower than the front, possibly accompanied by a tilt noticeable when you compare the left rear with the right rear, please respond by immediately proceeding to the near- est BMW Sports Activity Vehicle center. Drive with appropriate caution in the meantime. The vehicle has reduced ground clearance and driving comfort may be noticeably reduced.
Even when the position of the vehicle is normal, have the system checked as soon as possible when a malfunction is indicated.
96n2-axle self-leveling suspension*
The concept Your vehicle is equipped with 2-axle self-leveling suspension acting on both the front and rear suspension. This sys- tem combines automatic self-leveling, which compensates for variations in front-to-rear load-distribution patterns, with a selection feature allowing drivers to choose from among several ride- height options.
You may choose from among the fol- lowing ride heights:
>Normal The standard setting is intended for most operating conditions, including trailer towing
>Off-Road Increased level for more ground clearance
>Access Lowers vehicle for more convenient cargo handling or easier passenger entries and exits.
Changes in ride height are initiated either manually, using the control but- ton, refer to page 97, or automatically in response to specific speeds. When the ride height is selected manually, the driver has the additional option of revis- ing the ride-height selection by entering
a new command during the adjustment process.
When the vehicle is stationary, the sys- tem executes ride-height changes in both directions up and down when- ever the doors are closed. The tailgate/ liftgate may be open. The system raises the vehicle only when the engine is run- ning.
The system's automatic self-leveling feature automatically compensates for variations in the vehicle's load.
The ground clearance of the vehicle 6.5-9 in/16.5-22 cm, depending on the level selected.
Frequent changes in ride height initiated at short intervals can
overheat the compressor, causing the system to briefly suspend active opera- tion.<
Self-leveling suspension display 1 Off-Road
2 Standard
3 Access
The LEDs not only show the current ride height, but also indicate changes:
>LED on: indicates the vehicle's cur- rent ride height
>Ride-height LED flashes while the LED for the earlier level remains on: the ride height is being adjusted to a new level, either automatically or in response to driver input at the button.
When the suspension reaches the new ride height the flashing LED reverts to continuous operation, and the LED for the earlier level goes out.
5 3
0 d
e 2
1 8
97n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
2-axle self-leveling suspension*
>LED for current ride height flashes for roughly 3 seconds when you press the button: change in ride height is not possible.
Raising Available only when the engine is run- ning.
From Standard to Off-Road:
Press button 1 while traveling at a speed of less than approx. 30 mph/ 50 km/h.
From Access to Standard:
>Press button 1 or >automatically once the vehicle
exceeds a speed of approx. 20 mph/ 35 km/h.
5 3
0 d
e 2
1 9
Lowering Available with ignition key in position 2.
From Standard to Access:
1. Press button 2 while traveling at less than approx. 50 mph/80 km/h. The system enters its preselection mode. The preselection mode is canceled >by pressing button 1 >automatically once the vehicle
exceeds a speed of approx. 50 mph/80 km/h or approx. 60 seconds after button 2 is pressed
2. Reduce speed to below approx. 15 mph/25 km/h within approx. 60 seconds after pressing button 2.
When you press button 2 at speeds below approx. 15 mph/
25 km/h the system automatically low- ers the vehicle to the Access level.<
From Off-Road to Standard:
>Press button 2 or >automatically once the vehicle
exceeds a speed of approx. 30 mph/ 50 km/h.
98nBrake force display Flat Tire Monitor
The brake lamps light up in two stages, depending on how forcefully you apply the brakes.
>Normal braking: The brake lamp 1 and the center brake lamp light up
>Heavy braking: The brake lamps 1 and 2 light up together with the center brake lamp.
5 3
0 d
e 4
0 0
The concept The Flat Tire Monitor keeps track of the inflation pressures in the four fitted tires as you drive. The system provides an alert whenever the inflation pressure in one tire drops significantly in relation to the pressure in another tire.
The check of the tire inflation pressure is based on monitoring the relative speeds of the wheels. A flat is detected and reported on the basis of a deviation in certain speed ratios.
Functional requirement To ensure reliable operation, the sys- tem should have been initialized with the correct tire inflation pressure.
System limits The Flat Tire Monitor cannot indi- cate sudden severe tire damage
caused by outside factors and does not detect a natural, even pressure drop in all four tires.<
In the following situations, the system could be delayed or malfunction:
>When driving on snow-covered or slippery road surfaces
> In the case of performance-oriented driving: slip in the drive wheels, high lateral acceleration
>False alarms and undetected loss of pressure may occur when you are driving with snow chains fitted.
99n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Flat Tire Monitor
Initializing system Perform the initialization immedi- ately every time you correct the
inflation pressure, change a tire or change a wheel or all wheels. The vehi- cle must be driven during initialization.<
1. Start the engine, but do not begin to drive immediately.
2. Press the button until the yellow indi- cator lamp in the instrument cluster lights up for a few seconds.
3. Begin driving.
5 3
0 d
e 4
1 9
It takes a few minutes of driving before the Flat Tire Monitor can detect and report a flat tire.
When driving with snow chains, do not initialize the system.<
Indication of a flat tire The warning lamp lights up yel- low. There is a flat tire or exten- sive inflation pressure loss.
1. Reduce speed and stop the vehicle carefully. Avoid sudden braking and steering maneuvers
2. Identify damaged tire
If identification is not possible, contact your BMW Sports
Activity Vehicle center.<
3. Replace the damaged wheel, refer to Changing a wheel on page 165.
100n
Parking lamps/side marker lamps The front, rear and side vehicle lighting is switched on. You can use the parking lamps for park-
ing. For lighting on one side for parking as an additional feature, refer to page 101.
Low beams When the ignition is switched off and the low beams are on, only the parking lamps/side marker
lamps remain on.
5 3
0 u s2
1 5
Pathway lighting: When you activate the headlamp
flasher after parking the vehicle and switching off the lamps, the low beams will come on for a brief period. You may also have this function deactivated if you wish.<
Lights on warning Whenever you open the driver's door, after having turned the ignition key to position 0, an acoustic signal will sound for a few seconds to remind you that the lamps have not been switched off.
Alphanumeric Check Control*: The reminder is given through the Check Control.
Daytime driving lamps* The headlamps are automatically switched on for daytime driving at igni- tion key position 2.
Automatic headlamp control* When you set the switch to this position, the system activates and switches on and off the low
beams in response to changes in ambi- ent light conditions, for instance, in tun- nels, at dawn and dusk, and in rain and snow.
The low beams remain switched on regardless of the ambient light
when you switch on the front fog lamps.<
Automatic headlamp control can- not serve as a substitute for the
driver's judgment in determining when the vehicle lamps should be switched on. For example, the system cannot detect fog. To avoid safety risks, you should always switch on the lamps manually under these conditions.<
You can have the sensitivity of the headlamp control system adjusted
on your vehicle.<
Parking lamps/low beams
101n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Adaptive Head Light* High beams/roadside parking lamps
The concept Adaptive Head Light is a variable head- lamp control system that enables better illumination of the road surface. Depending on the steering angle and other assumptions, the light from the headlamp follows the course of the road.
Activating Adaptive Head Light In ignition key position 2, turn the light switch to the position 'Automatic headlamp control',
refer to page 100.
To avoid blinding oncoming traffic, the Adaptive Head Light
> is not active when driving in reverse > is active only when pointing toward
the passenger side.
Malfunctions The LED next to the symbol for auto- matic headlamp control flashes. Adap- tive Head Light is faulty or has failed. Have the system checked as soon as possible.
1 High beams
2 Headlamp flasher
3 Roadside parking lamps
Roadside parking lamps, left or right* As an additional feature, you can illumi- nate your vehicle on either side for parking, if you wish:
With the ignition key in position 0, engage the lever in the appropriate turn signal position.
The roadside parking lamps drain the battery. Avoid use for
extended periods of time, otherwise, it will no longer be possible to start the engine.<
5 3
0 d
e 2
6 5
102nFront fog lamps Instrument lighting
Briefly press the button to switch on/off.
The parking lamps or low beams must be switched on for the fog lamps to operate. A green indi-
cator lamp appears in the instrument cluster to indicate that the front fog lamps are on.
If the high beams are switched on, the front fog lamps go out.
If the automatic headlamp control is activated, the low beams will
automatically be switched on when the front fog lamps are switched on.<
5 3
0 u s2
1 0
Turn the knurled wheel to adjust the illumination intensity.
5 3
0 u s2
1 6
103n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Interior lamps
The interior lamps operate automati- cally.
Switching interior lamps on and off manually Briefly press button 1.
If you want the interior lamps to remain off all the time, press and hold the but- ton for approx. 3 seconds.
Briefly press the button to revert to nor- mal operation.
The button for the interior lamps in the rear passenger area only switches these lamps on and off.
5 3
0 u e 2
6 3
Reading lamps* Reading lamps are located at the front and in the rear next to the dome light. They can be switched on and off with the respective buttons 2 located next to them.
Footwell and cargo area lamps The lamps are controlled in the same manner as the front interior lamps.
Courtesy lighting* This lighting system in the two exterior mirrors illuminates the ground in the area near the two front doors. It is also controlled in the same manner as the front interior lamps, but it does not function while the vehicle is moving.
In order to prevent battery dis- charge, all of the lamps in the
vehicle are switched off automatically approx. 15 minutes after the ignition key is turned to position 0.<
104n
1 Airflow directed toward the wind- shield and side windows
2 Airflow for the upper body 106
3 Front footwell ventilation
4 Rear footwell ventilation
5 Airflow for the upper body in the rear seat 106
6 Temperature 105
7 Air distribution 105
8 Air supply 105
9 Rear window defroster 105
10 Air conditioning 105
11 Recirculated-air mode 105
Air conditioner
5 3
0 u e 2
5 8
105n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Air conditioner
Temperature The graduations on the dial provide general reference val- ues for the interior tempera- ture. 707/226 is recom-
mended as a comfortable setting. After driving begins, the selected tempera- ture is reached as quickly as possible and kept constant by the control sys- tem.
Air distribution You can direct air to flow onto the windows , toward the upper body and into the footwell . All intermediate
settings are possible. In the setting, there is a low flow of air onto the win- dows to keep them free of condensa- tion.
Air supply You can adjust the air supply through an infinitely-variable range. The heating and venti- lation become more and more
effective as the air supply settings are increased. In the 0 setting, the blower and climate control are switched off and the outside air supply is blocked.
Rear window defroster When the rear window defroster is activated, the
LED lights up. The rear window defroster switches off automatically.
Air conditioning The air is cooled and dehu- midified and depending on
the temperature setting warmed again. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce condensation forming on the windows by switching on the air conditioning.
During air conditioning, condensa- tion forms, which then exits under
the vehicle. Traces of water on the ground are therefore normal.<
Recirculated-air mode You can respond to unpleas- ant odors outside the vehicle
by temporarily switching off the outside air supply. The system then recirculates the air currently within the vehicle.
You can also use the button on the steering wheel to switch over to the recirculated-air mode, refer to page 23.
If the windows fog over in the recirculated-air mode, switch the
recirculated-air mode off and increase the air supply as required.<
106nAir conditioner
Ventilation The air vents for the upper body region are adjustable:
1 Knurled wheels for opening and closing the vent outlets through an infinitely-variable range
2 Levers for adjusting airflow direction
3 Use this knurled wheel to adjust the temperature of the incoming air: >Turn toward blue: colder >Turn toward red: warmer.
5 3
0 d
e 2
7 0
Rear ventilation* 1 Knurled wheel for opening and clos-
ing the vent outlets through an infi- nitely-variable range
2 Levers for adjusting airflow direction
The air that flows out here is somewhat cooler than the air delivered to the foot- well.
Microfilter The microfilter removes dust and pollen from the incoming air and in the recircu- lated-air mode. It is replaced by your BMW Sports Activity Vehicle center during regular maintenance. A substan- tial reduction in air supply indicates that the filter must be replaced before nor- mal maintenance.
5 3
0 d
e 2
7 1
Defrosting windows and removing condensation 1. You can specify an interior tempera-
ture that is comfortable for you with the rotary temperature dial. A good starting point is 707/226
2. Set the air distribution rotary dial to
3. Set the blower/air supply rotary dial completely to the right
4. Close the vent outlets in the rear seating area
5. Switch on the rear window defroster to defrost the rear window.
5 3
0 u s1
4 9
107n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
1 Airflow directed toward the wind- shield and side windows
2 Airflow for the upper body 111
3 Airflow for the footwell
4 Rear footwell ventilation
5 Airflow for the upper body in the rear seat 111
6 Automatic air distribution and supply 109
7 Individual air distribution 109
8 Temperature, left side of passenger compartment 109
9 Display for temperature and air supply 109
Automatic climate control*
5 3
0 u e 2
5 9
108nAutomatic climate control*
10 Temperature, right side of passen- ger compartment 109
11 Defrosting windows and removing condensation 109
12 Air conditioning 110
13 AUC Automatic recirculated-air control 110
14 Rear window defroster 110
15 Air supply 109
16 Maximum cooling 110 or residual heat utilization 110
17 Air grill for interior temperature sensor please keep clear and unobstructed
5 3
0 u e 2
5 9
109n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Automatic climate control*
Tips for pleasant driving For nearly all conditions, AUTO pro- gram 6 offers the optimal air distribution and airflow volume. Select the interior temperature that is comfortable for you.
Detailed setting options are described for you in the following section.
Your BMW Sports Activity Vehicle center can program the settings of
your vehicle in such a manner that, when you unlock the vehicle with your individualized key, your own personal- ized setting for the automatic climate control is initiated.<
Automatic air distribution The AUTO program adjusts the airflow and dis-
tribution patterns for you while also using your preselected temperature setting as the basis for adjusting the interior climate to adapt to external influences: summer, winter.
Individual air distribution You can cancel the AUTO program by selecting spe- cific air distribution patterns for your personal comfort, the automatic air supply
remains in operation. You can direct air to flow onto the windows , toward the upper body , and into the foot- well . You can reactivate the auto- matic air distribution mode by pressing the AUTO button.
Temperature Set the desired tempera- ture individually on the driver's and front passen-
ger side.
The automatic climate control adjusts this temperature as quickly as possible at any time of year, if necessary with the maximum cooling or heating capacity, and then keeps it constant.
When switching between differ- ent temperature settings in rapid
succession, the automatic climate con- trol does not have sufficient time to adjust the set temperature.<
To change the units of measure in the display 7/6, refer to page 73 or 80.
Air supply In the AUTO program, the air supply is automati-
cally controlled, and AUTO appears on the display 9, refer to overview on page 107. You can vary the air supply by pressing the left or right half of the button. When your setting is displayed as bars, the automatic air supply is switched off. Automatic air distribution maintains its setting. You can reactivate the automatic air supply by pressing the AUTO button.
When you press the left side of the but- ton during operation at minimum blower speed, all displays are canceled: the blower, heating and air conditioner are switched off. The outside air supply is closed. You can switch the system back on by pressing any button of the auto- matic climate control, except the MAX button 16.
Defrosting windows and removing condensation
Quickly remove ice and condensation from the
windshield and front side windows.
110nAutomatic climate control*
Air conditioning The air is cooled and dehumidified and
depending on the temperature setting warmed again. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce condensation forming on the windows by switching on the air conditioning.
During air conditioning, condensa- tion forms, which then exits under
the vehicle. That traces of water on the ground are therefore normal.<
Maximum cooling Maximally cooled air is obtained as quickly as possi-
ble from an outside temperature above 327/06 and with the engine running.
The automatic climate control changes over to the lowest temperature and switches into the recirculated-air mode. The maximum air quantity only flows out of the vents for the upper body. Therefore, open these vents for maxi- mum cooling.
AUC Automatic recirculated-air control
You can respond to unpleasant odors or pollut-
ants in the immediate environment by shutting off the supply of outside air. The system then recirculates the air currently within the vehicle. In AUC operating mode, a sensor detects pol- lutants in the external air and controls the shut-off automatically.
Press the button repeatedly to run through the following control sequence
>LEDs off: outside air supply opera- tional
>Left LED on, AUC mode: the system detects pollutants in the outside air and blocks the flow of air when nec- essary. The system then recirculates the air currently within the vehicle. Depending on the air quality, the automatic system then switches back and forth between outside air supply and recirculation of the air within the vehicle
>Right LED on: the outside air supply into the vehicle is shut off continu- ously. The system then recirculates the air currently within the vehicle.
You can also use the button on the steering wheel to switch between Off and recirculated-air mode or between AUC and recirculated-air mode, refer to page 23.
If the windows fog over in the recirculated-air mode, switch the
recirculated-air mode off and increase the air supply as required.<
Rear window defroster When the rear window defroster is activated, the
LED lights up. The rear window defroster switches off automatically after a while.
Residual heat Press the button when the motor is switched off, but
warm.
The heat stored in the engine is utilized for heating the interior when the engine has been switched off while waiting at a railroad crossing, for instance.
This function may be activated when the outside temperature is below approx. 597/156, the engine is at operating temperature, and the battery
111n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Automatic climate control*
is adequately charged. The LED on the button will light up when all conditions have been met.
Ventilation The air vents for the upper body region are adjustable:
1 Knurled wheels for opening and clos- ing the vent outlets through an infi- nitely-variable range
2 Selector levers for airflow direction
3 Use this knurled wheel to control the temperature of the airflow: >Turn toward blue: colder >Turn toward red: warmer.
5 3
0 d
e 2
7 0
Rear climate control* 1 Air supply
2 Temperature
3 Adjusting the direction of the airflow
5 3
0 d
e 2
7 2
112nAutomatic climate control*
Air supply 0 Blower off
I Maximum blower speed
You can adjust the air supply for the vent outlets through an infinitely-vari- able range between the 0 and I set- tings.
In the 0 setting, the blower is switched off and the supply of air through the vent outlets is blocked.
Individual adjustments on the front-seat control elements influence the air sup- ply for rear passenger area climate con- trol.
5 3
0 d
e 2
7 3
Temperature Passengers in the rear seating area can adjust their own temperature for the vent outlets:
>Turn toward blue: colder >Turn toward red: warmer.
When you start the vehicle, this system ensures that the selected temperature is achieved as quickly as possible. It then maintains this temperature, regardless of the season.
It is only possible to adjust the temperature when the blower is
switched on, not in the 0 setting.<
5 3
0 d
e 2
7 4
Microfilter/activated-charcoal filter The microfilter removes dust and pollen from the incoming air. The activated- charcoal filter provides additional pro- tection by filtering gaseous pollutants from the outside air. Your BMW Sports Activity Vehicle center replaces this combined filter as a standard part of your scheduled maintenance. A sub- stantial reduction in air supply indicates that the filter must be replaced before normal maintenance.
113n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Roller sun blinds* Parked car ventilation*
Roller sun blinds for rear side windows* Use the strap to pull out the blinds, then hook them in the attachment provided.
With roller sun blinds attached, do not open the windows during
travel. The blinds may otherwise be damaged by the wind.<
You can use this system to ventilate the interior and lower its temperature, using the blower of the parked car ventilation or of the automatic climate control.
The parked car ventilation is operated via the MID Multi-Information Display, refer to page 84 or via the onboard computer, refer to the separate Owner's Manual.
You can set two different times for the system to start; it will remain active for 30 minutes. You can also switch it on and off directly. Since the system uses a substantial amount of electrical cur- rent, you should refrain from switching it on twice in succession without allow- ing the battery to be recharged in nor- mal operation between uses.
When a preselected activation time is set, the parked car ventilation is opera- tional at outside temperatures above approx. 607/166, or by direct switch activation.
The air enters the passenger compart- ment through the vent outlets in the instrument cluster, which can be adjusted for both direction and airflow. The vent outlets must therefore be open for the system to operate.
114n
The concept The integrated universal remote control can replace as many as three hand- held transmitters for various remote- controlled accessories, such as door openers and house alarm systems. The integrated universal remote control rec- ognizes and learns the transmitted sig- nal of each of the original hand-held transmitters.
The signal of an original hand-held transmitter can be programmed on one of the three memory buttons 1. Follow- ing that, each of the devices can be actuated with the appropriately-pro- grammed memory button 1. The LED 2 flashes to confirm transmission of the signal.
Should you sell your vehicle one day, be sure to delete the stored programs beforehand for your safety, refer to page 116.
To prevent possible damage or injury, before programming or
using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the travel range of the device. Also, comply with the safety precautions of the original hand-held transmitter.<
To Canadian residents: During programming, your hand-
held transmitter may automatically stop transmitting after two seconds, which may not be long enough to program the integrated universal remote control. If you are programming from one of these hand-held transmitters, the Universal Transmitter's light may begin to flash in a series of double-blinks. If this occurs, continue to hold the button of the inte- grated universal remote control while you reactivate your hand-held transmit- ter. You may have to repeat this func- tion several times while programming.<
Checking compatibility If you see this symbol on the packaging or in the manual sup- plied with the original hand-held
transmitter, it is safe to assume that it is compatible with the integrated universal remote control.
A list of compatible hand transmitters is available via fax polling by calling +49 (0)6838 907283 3333. For details, please call the toll-free HomeLink Hotline at +49 (0)6838 907 277 or 0800 0466 35465 in Germany.
HomeLink is a registered trademark of Johnson Controls.
Integrated universal remote control*
115n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Integrated universal remote control*
Programming 1 Memory buttons
2 LED
Fixed-code hand-held transmitter 1. Switch on the ignition. 2. For initial use: press both outer
buttons 1 for approx. 20 seconds until the LED 2 flashes. The three memory buttons 1 are cleared.
3. Hold the original hand-held transmit- ter at a distance of approx. 2 to 8 in/ 5 to 20 cm from the memory but- tons 1.
The required distance between the hand-held transmitter and
memory buttons 1 depends on the relevant system of the original hand- held transmitter used.<
5 3
0 u e 2
6 4
4. Simultaneously press the transmit button on the original hand-held transmitter and the desired memory button 1 of the integrated universal remote control. The LED 2 flashes slowly at first. As soon as the LED 2 flashes rapidly, release both buttons. If the LED 2 does not flash rapidly after approx. 15 seconds, alter the distance.
5. To program other original hand-held transmitters, repeat steps 3 and 4.
The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.
You can operate the system when the engine is running or when the ignition is switched on.
If the system cannot be operated after repeated programming,
check whether the original hand-held transmitter uses an alternating-code system. To do so, either read the instructions of the original hand-held transmitter or press and hold down the programmed memory button 1 of the integrated universal remote control.
If the LED 2 on the integrated universal remote control flashes quickly for a brief period and then remains lit up for approx. two seconds, this indicates that the original hand-held transmitter is equipped with an alternating code. In the case of an alternating-code system, program the memory buttons 1 as described in the section on alternating- code hand-held transmitters. If you have additional questions, please consult your BMW Sports Activity Vehi- cle center or call 1-800-355-3515. You can also visit our website www.bmwusa.com.<
Alternating-code hand-held transmitter To program the integrated universal remote control, consult the Owner's Manuals for the equipment to be set. You will find information there on the possibilities for synchronization. When programming alternating-code hand-held transmitters, please follow the supplementary instructions below:
Programming will be easier with the aid of a second person.<
116nIntegrated universal remote control* Car phone*
1. Park your vehicle within the range of the remote-controlled device
2. Program the integrated universal remote control as described at the section on fixed-code hand-held transmitters
3. Locate the button on the receiver of the device you want to set up, e.g. on the upper section of the motor
4. Press the button on the receiver of the device you want to set up. After step 4, you have approx. 30 seconds for step 5
5. Press the programmed memory button 1 on the integrated universal remote control three times.
The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.
If you have any additional ques- tions, please contact your BMW
Sports Activity Vehicle center.<
Clearing memory buttons It is not possible to clear memory but- tons 1 individually. To clear all three memory buttons 1, proceed as follows:
Press both outer buttons 1 of the inte- grated universal remote control for approx. 20 seconds, maintaining pres- sure until the LED 2 starts to flash.
Hands-free system On vehicles with telephone provisions*, the hands-free microphone is located in the headliner.
For further information on the tele- phone, refer to the telephone Owner's Manual.
5 3
0 u e 2
6 5
117n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Interior rearview mirror with digital compass*
1 Adjusting knob for compass zones
2 Display
The display indicates the cardinal and/ or intercardinal direction in which you are currently driving.
Setting compass zones Depending on where you and your vehi- cle are located, it is necessary to set the appropriate compass zone, refer to world map with compass zones, page 118. To set the compass zone, press the adjusting button in the mirror frame for approx. 3-4 seconds with a sharp object, e.g. a ball-point pen or the like. The display indicates the number of the currently set compass zone.
5 3
0 d
e 4
2 5
To change the zone setting, press the adjusting button repeatedly until the number of the compass zone that applies to your current position is dis- played.
The compass will be operational again after approximately 10 seconds.
For automatic dimming action, refer to Interior and exterior mirrors, automatic dimming feature on page 138.
Calibrating digital compass In the following situations, the digital compass must be calibrated:
>C or CAL appears on the display >The wrong cardinal direction appears
on the display >The cardinal direction displayed does
not change despite a change in the direction of travel
>Not all cardinal directions are dis- played.
How to correct this:
1. Make sure that there are no large metal objects or overhead power lines in the vicinity of your vehicle and that you have enough space to drive in a circle
2. Input the currently applicable com- pass zone
3. Press the adjustment button to bring up C or CAL. Then drive in a com- plete circle at a maximum speed of 4 mph/7 km/h. If the calibration was successful, the displays C or CAL are replaced with the points of the compass.
118nInterior rearview mirror with digital compass*
5 3
0 d
e 4
1 3
119n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Glove compartment Storage compartments
Opening Pull the handle. The lamp inside the glove compartment comes on.
Closing Fold the cover up.
To prevent injury in the event of an accident, close the glove com-
partment immediately after use.<
5 3
0 d
e 2
7 5
Locking Use one of the master keys. A master key is also required for unlocking.
If you turn over only your spare key for valet parking, for example,
refer to page 30, this prevents unautho- rized access to the glove compart- ment.<
Rechargeable flashlight Located on the left-hand side of the glove compartment. Features integral overload-protection, so it can be left in its holder continu- ously.
To avoid completely discharging and possibly damaging the lamp,
always ensure that it is switched off before inserting it into the socket.<
You will find two storage compartments in the armrest between the front seats.
To open the top compartment: Press the button, refer to arrow 1. A built-in phone* is located in this com- partment.
To move the armrest or open the lower compartment: Pull the handle, refer to arrow 2. This compartment contains a coin tray and a storage compartment* for cas- settes or CDs.
You will find additional storage com- partments in all of the doors as well as on the backrests of the front seats.
5 3
0 d
e 2
7 6
120nStorage compartments Cup holders
Clothes hooks When suspending clothing from the hooks, ensure that it will not
obstruct the driver's vision. Do not hang heavy objects on the hooks. If you do so, they could cause endanger passen- gers during braking or evasive maneu- vers.<
Front Below the sliding cover, refer to illustra- tion.
5 3
0 d
e 2
7 7
Rear At the end of the center console under the lighter.
Briefly press to open; push back inward to close.
Do not place glass containers in the cup holders, otherwise there is
a danger of injury in an accident.<
5 3
0 d
e 2
7 8
121n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Ashtray, front Ashtray, rear
Emptying Press the edge of the lid, refer to arrow: the ashtray moves up and can be removed.
Cigarette lighter, front Press the lighter 1 in. The lighter can be removed as soon as it pops out.
Hold or briefly press the hot ciga- rette lighter by the knob only.
Holding or touching it in other areas could result in burns. The cigarette lighter remains opera- tional when the ignition key has been removed. For this reason, do not leave unsupervised children in the vehicle.<
5 3
0 d
e 3
3 8
Socket The cigarette lighter socket can be used to plug in hand flashlights, car vacuum cleaners etc., with power rat- ings of up to approx. 200 W at 12 V. Be careful not to damage the socket with unsuitable plugs.
Additional sockets are located in the cargo area, refer to page 128, and in the front passenger footwell.
Emptying Remove the insert tray.
5 3
0 d
e 2
8 2
122nCigarette lighter, rear
Press the lighter in. The lighter can be removed as soon as it pops out.
Hold or briefly press the hot ciga- rette lighter by the knob only.
Holding or touching it in other areas could result in burns. The cigarette lighter remains opera- tional when the ignition key has been removed. For this reason, do not leave unsupervised children in the vehicle.<
5 3
0 d
e 2
3 9
123n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Ski bag*
The ski bag allows the safe and clean transport of up to four pairs of standard skis or up to two snowboards.
With the length of the ski bag and the additional space in the cargo area, you can store skis up to 6.8 ft/2.1 m length. Because stowing skis of this maximum length causes the ski bag to narrow, it can only accommodate two pairs of skis with a length of 6.8 ft/2.1 m.
Loading 1. Fold down the center armrest.
Loosen the trim from the upper Velcro fastener and place it onto the armrest
5 3
0 u s0
7 7
2. Press button 1 downward and swing the cover forward
3. Press button 2: the cover in the cargo area is unlocked. With pull-out cargo floor, refer to page 128: pull out floor, release cover and push back floor again; the floor then conceals the cover
4. Place ski bag between the front seats and load. The zip fastener facil- itates access to the stowed items.
Make sure that only clean skis are loaded into the ski bag. Wrap sharp edges so that no damage occurs.
5 3
0 d
e 2
8 3
124nSki bag* Cargo area
Securing load After loading, secure the ski bag and its contents. To do so, tighten the retaining belt at the buckle.
Secure the ski bag in this way. If you fail to do so, it could endanger
occupants during braking or evasive maneuvers.<
When stowing the ski bag, proceed in the reverse order from loading.
5 3
0 d
e 2
8 4
If the cover in the cargo area is concealed by the pull-out cargo
floor, do not fold the larger rear back- rest down. If you do so, it will damage the cover.<
Folding rear backrests down Reach into the recess and pull forward, refer to arrow.
When you fold back the backrest, be sure that the catch engages
securely. The red warning indicator dis- appears in the recess when the catch is engaged. The center safety belt can only be pulled out when the larger backrest is locked.<
5 3
0 d
e 2
8 5
125n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Cargo area
Roll-up cover Pull out the roll-up cover and hook it into the brackets at the rear.
You can carry light objects such as items of clothing on the roll-up cover.
Do not place heavy or hard objects on the roll-up cover. If you
do so, they could pose a danger to vehicle occupants during braking or evasive maneuvers. Do not allow the roll-up cover to snap back, otherwise it could be damaged.<
5 3
0 d
e 3
4 8
Removing roll-up cover 1. Unlock the case with the button,
refer to arrow 1, lift it out of the bracket on the side and hold it in place on the opposite side with the other hand
2. Then push the case toward the side window, refer to arrow 2. This pulls it out of the second bracket and it can be removed.
Installation Lay the case in the two side brackets and then press down until it engages.
5 3
0 d
e 3
4 9
Partition net* 1. Remove the bag with the partition
net from the retainer by releasing the hooks from the lashing eyes on both sides
5 3
0 d
e 0
2 8
126nCargo area
2. Remove the partition net from the bag, unroll it half way and hook it into the retaining strap on both sides, refer to arrow
Note how the partition net is stored in the bag and secured
in the vehicle so that you can return everything to its proper place again after use. If your vehicle has a pull-out cargo floor, follow the instructions on page 128.<
5 3
0 d
e 3
5 0
3. Slide back the covers on the retain- ers for the partition net on both sides of the roof, refer to arrow
4. Insert the curved ends of the partition net rod into the retainers on both sides
5. Now you can slide the covers toward the front again, refer to arrow
5 3
0 d
e 2
8 9
6. Pull the partition net down by the loop on both sides, refer to arrow, and hook the hook into the eye on the backrest
The case with the roll-up cover is not shown in the illustration. With
the case removed, it is easier to hook the hooks of the partition net onto the backrest.<
5 3
0 d
e 3
5 1
127n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Cargo area
7. When the rear backrests are folded down, you can unhook the partition net from the retaining straps, com- pletely unroll it, insert it in the front retainers on the roof and attach the three hooks into the eyes on the backrests. The illustration shows securing at the bottom right as an example.
5 3
0 d
e 3
5 2
Side covers Pull the handle to open the side covers.
5 3
0 d
e 2
9 0
Floor cover To access the spare wheel.
To open: press the recess in the han- dle, refer to arrow, and raise the cover with the handle.
5 3
0 d
e 2
9 1
128nCargo area
Folding floor cover up Disengage the loop end on the under- side of the floor cover and hook it in with the catch on the upper frame of the liftgate cutout.
Before swinging down the floor cover, reengage the loop end in the retainer on the underside of the floor cover.
5 3
0 d
e 3
5 5
Sockets When you fold the cover caps up, you have access to additional sockets.
You can use the sockets for flashlights, car vacuum cleaners or other automo- tive appliances with up to approx. 200 watts at 12 volts. Be careful not to damage the socket with unsuitable plugs.
Also refer to page 121.
5 3
0 u s0
8 4
Pull-out cargo floor* To release, pull the handle recess upward. Then pull the floor out.
Do not drive when the cargo floor is pulled out.
Do not release the cargo floor on steep grades. If you do, it could extend auto- matically and cause personal injuries. A load which is not properly secured could slide if the floor extends automat- ically and then drop to the ground as a result of the rapid braking of the cargo floor at the limit stop.<
5 3
0 d
e 2
9 2
129n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Cargo area
When it is extended, you can load the cargo floor:
>With up to 990 lbs./450 kg, distrib- uted evenly across the entire surface
>With up to 330 lbs./150 kg on the rear edge.
Do not overload the cargo floor when it is extended. If you do so, it
could cause damage. When sliding the cargo floor back in, do not reach under the floor. Otherwise there is a risk of injury.< Raising cargo floor
For access to the spare wheel or other stored items:
Swing the cargo floor up and secure it with the rod, refer to illustration.
If your vehicle has a partition net: Take the bag with the partition net
out of the retainer, refer to page 125, before you raise the cargo floor. Other- wise, the bag could slide downward.<
5 3
0 d
e 2
4 0
130nCargo loading
Avoid overloading the vehicle so that the permissible loading
capacity of the tires is not exceeded. Overloading can lead to overheating and increases the rate at which damage develops inside the tires. The ultimate result can assume the form of a sudden air loss.<
Determining loading limit 1. Locate the following statement on
your vehicle's placard*:
The combined weight of occu- pants and cargo should never
exceed XXX lbs. or YYY kg, other- wise the vehicle may be damaged and unstable driving conditions may result.<
2. Determine the combined weight of the driver and passengers that will be riding in your vehicle
3. Subtract the combined weight of the driver and passengers from XXX lbs. or YYY kg
5 3
0 d
e 2
2 5
4. The resulting figure equals the avail- able amount of cargo and luggage load capacity. For example, if the XXX amount equals 1,350 lbs. and there will be five 150 lbs. passengers in your vehi- cle, the amount of available cargo and luggage load capacity is 600 lbs.: 1,350 lbs. minus 750 lbs. = 600 lbs.
5. Determine the combined weight of luggage and cargo being loaded into the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4
6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult the manual for transporting a trailer to determine how this may reduce the available cargo and luggage load capacity of your vehicle.
131n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Cargo loading
Load:
The permitted load is the total of the weight of occupants and cargo/lug- gage. The greater the weight of occu- pants, the less cargo/luggage can be transported.
5 3
0 u s2
4 9
Stowing cargo >Use the partition net to protect the
occupants, refer to page 125 >Position heavy cargo as far forward
as possible directly behind the back- rests and as low as possible
>Cover sharp edges and corners >Do not pile objects higher than the
top edge of the backrest >Appropriately wrap objects that could
strike the rear window while driving > If you are transporting very heavy
loads when the rear seat is not occu- pied, secure the outer safety belts in the opposite buckles.
5 3
0 d
e 4
2 6
Securing load >Secure smaller, light pieces with the
retaining straps or a luggage net*, or use elastic straps, refer to page 37
>Heavy-duty cargo straps* for secur- ing larger and heavier objects are available at your BMW Sports Activity Vehicle center. The lashing eyes pro- vided at the corners of the cargo area serve for mounting these heavy-duty cargo straps
>Read and comply with the informa- tion enclosed with the heavy-duty cargo straps.
5 3
0 u s0
9 0
132nCargo loading Roof-mounted luggage rack*
Always position and secure the load as described above. If you do
not, it can endanger the passengers during braking or evasive maneuvers. Do not exceed the permissible gross vehicle weight and the permissible axle loads, refer to page 182. If you do, the operating safety of the vehicle is no longer ensured and you are in violation of the law. You should never transport heavy or hard objects unsecured in the passen- ger compartment, as they could fly around and pose a safety hazard to the vehicle's occupants even during abrupt braking or evasive maneuvers.<
A special rack system is available as an option for your BMW. Please comply with the precautions included with the installation instructions.
Mounting points Access to the mounting points: To fold up the cover, refer to arrow, please use the tool which is provided with the rack system.
5 3
0 d
e 2
9 3
Loading luggage rack Roof-mounted luggage racks raise the center of gravity of the vehicle when they are loaded and therefore signifi- cantly effect the vehicle's handling and steering response.
It is thus crucial never to exceed the approved roof weight, the approved gross vehicle weight or the axle loads when loading the rack.
You will find the specifications under Technical data on page 182.
Make sure that the load is distributed evenly, and that it does not extend out- ward to beyond the limits of the loading surface. Always load the heaviest pieces on the bottom. Be sure that ade- quate clearance is maintained for rais- ing the panorama glass roof, and that objects do not project into the opening path of the liftgate.
Always ensure that roof-mounted loads are tightly secured, as loose
loads can shift or even fly off the roof, posing a serious hazard for following traffic.<
Drive smoothly. Avoid sudden accelera- tion and braking maneuvers. Take cor- ners gently.
133n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
134n
135n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
Maintena
136n
Moving parts should be allowed to break in. To ensure that your vehicle provides maximum economy through- out a long service life, we request that you comply with the following instruc- tions:
Engine and differential Obey your local and state maximum speed limits.
Up to 1,200 miles/2,000 km:
Drive at varying engine speeds and road speeds, but do not exceed 4,500 rpm and the following road speeds during this initial period:
>6-cylinder engine 100 mph/160 km/h
>8-cylinder engine 106 mph/170 km/h
Avoid full-throttle operation and use of the transmission's kick-down mode during these initial miles.
From 1,200 miles/2,000 km:
The engine and vehicle speed can gradually be increased.
Tires Due to technical factors associated with their manufacture, tires do not achieve their full traction potential until after an initial break-in period. Therefore, drive reservedly during the first 200 miles/ 300 km.
Obey your local and state maximum speed limits.
When the vehicle is operated on wet or slushy roads, a wedge of
water may form between the tire and the road surface. This phenomenon is referred to as hydroplaning and can lead to partial or complete loss of trac- tion, vehicle control and braking effec- tiveness. Reduce your speed on wet roads.<
Brake system Brakes require an initial break-in period of approx. 300 miles/500 km to achieve optimal contact and wear patterns between brake pads and rotors.
To break in the separate handbrake drums, apply the handbrake lightly when coasting to a standstill at a traffic signal, for instance, provided that traffic conditions allow you to do so.
To avoid corrosion, repeat this proce- dure from time to time.
The brake lamps do not light up when the handbrake is applied.
Vacuum for the brake system servo unit on your BMW is available only when the engine is running. When you move the vehicle with the engine switched off, when towing, for instance, substantially higher levels of pedal force will be required to brake the vehicle.<
Clutch The function of the clutch is only at its optimized level after a distance driven of approx. 300 miles/500 km. During this break-in period, engage the clutch gently.
Following component replacements Observe the break-in instructions again if previously addressed components must be replaced again during subse- quent driving.
Breaking-in
137n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
General driving notes
Closing liftgate/tailgate Operate the vehicle only when the tailgate and liftgate are completely
closed. Otherwise, exhaust fumes could enter into the passenger com- partment.<
However, if special circumstances should make it absolutely necessary to operate the vehicle with the liftgate/tail- gate open:
1. Close all windows and the panorama glass roof
2. Increase the air supply for the air conditioner or automatic climate control to a high level, refer to page 105 or 109.
Hot exhaust system Extreme temperatures occur on the exhaust system on any vehi-
cle. Do not remove the heat shields installed adjacent to it, and never apply undercoating to them. When driving, standing at idle and while parking, take care to avoid possible contact between a hot exhaust system and any highly flammable materials such as hay, leaves, grass etc. Otherwise, there is a danger of ignition and fire, with the risk of serious injuries and damage.<
Mobile communications devices in vehicle
BMW advises against using mobile communications devices
such as mobile phones inside the vehi- cle unless they are directly connected to the external antenna. Otherwise, it is impossible to prevent a mutual interfer- ence of the vehicle electronics with the mobile phone device. Also, there is no guarantee that the radiation generated by the transmission will be conveyed out from the interior of the vehicle.<
When vehicle is parked Condensation forms in the air condi- tioner system during operation and then exits under the vehicle. Traces of water on the ground are therefore normal.
Brakes Do not drive with your foot resting on the brake pedal. Even light but
consistent pedal pressure can lead to excessively high temperatures, brake wear and possibly even brake failure.<
Road hazards If road hazards, obstacles or curbs are unavoidable, only drive over
them very slowly and carefully, other- wise the wheels and suspension parts, especially on vehicles fitted with low profile tires, can be damaged.<
For more information on wheels and tires, refer to page 146.
Before driving into a car wash Fold in the exterior mirrors, refer to page 53, otherwise they could be dam- aged due to the width of the vehicle.
Hydroplaning When driving on wet or slushy roads, reduce road speed. If you
do not, a wedge of water can form between tires and road surface. This state can cause a partial or total loss of contact with the road surface, of braking control and of control over the vehicle.<
138nGeneral driving notes Driving your X5
Driving through water Do not drive through water on the road if it is deeper than 20 in/
50 cm, and then only at walking speed at the most. Otherwise, the vehicle's engine, the electrical systems and the transmission may be damaged. When equipped with 2-axle self leveling sus- pension*, switch the vehicle into the Off-Road setting before driving through, refer to page 97.<
Using handbrake on slopes Do not hold the vehicle in place on slopes by slipping or riding the
clutch; use the handbrake instead. Oth- erwise, severe clutch wear will result.<
Interior and exterior mirrors, automatic dimming feature* Two photocells serve to control the automatic dimming of the interior and exterior rearview mirrors. One photocell is in the mirror glass, refer to arrow, while the other is on the back of the mirror, offset somewhat from the first.
For trouble-free operation, keep the photocells clean and do not cover the area between the interior rearview mir- ror and the windshield. Do not attach any kind of stickers to the windshield in front of the mirror either.
5 3
0 u s2
4 5
On poor roads When you are driving on poor roads, there are a few points which you should strictly observe for your own safety, for that of your passengers, and for the safety of the vehicle:
Driving on unpaved terrain can cause damage to the vehicle.<
>Always adapt the driving speed to the road conditions. The rougher or steeper the road surface is, the lower the speed should be
>You can operate your vehicle on uphill and downhill gradients with a maximum slope of 50%. If you want to drive on uphill or downhill gradi- ents of this kind, make sure before- hand that the engine oil and coolant levels are near the max mark, refer to pages 152 and 154. Use the HDC Hill Descent Control when driving down steep grades, refer to page 94. It is possible to start off on grades of up to 33%. The permissible body roll is also 50%
>While driving, watch carefully for obstacles such as rocks or holes. Try to avoid these obstacles whenever possible
139n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Driving your X5
>Please note that it is possible for the undercarriage to touch the ground, for example on crests and bumpy roads. The ground clearance of the vehicle is: without self-leveling suspension
X5 3.0i, 4.4i: 8 in/20 cm X5 3.0d: 7 in/17.5 cm
with 2-axle self-leveling suspen- sion* 6.5-9 in/16.5-22 cm, depending on the level selected.
>Only drive through water up to a max- imum depth of 20 in/50 cm and only at walking speed, making sure not to stop in the process. When equipped with 2-axle self leveling suspension*, switch the vehicle to the Off-Road setting before driving through, refer to page 97. After leaving the water, apply the footbrake lightly several times while driving at low speeds so as to dry the brakes by braking and to prevent decreased braking action due to wet- ness.
Back onto paved road Our recommendation that you observe the following points after driving on adverse road surfaces is not intended as a beauty treatment for your BMW. Instead, it is intended to maintain driv- ing safety:
>Clean the worst of the dirt from the body and inspect the undercarriage for damage.
>Clean mud, snow, ice etc. from the wheels and tires and check the wheels for damage.
>Check to determine whether rocks, gravel or accumulations of dirt on the brake rotors and calipers could influ- ence braking performance. Remove all such foreign objects.
> In order to clean the brake rotors, apply the footbrake gently several times while driving at a low speed. Be sure that following traffic is not endangered by this.
>For cleaning the handbrake, apply the lever slightly at approx. 25 mph/ 40 km/h and continue to drive for approx. 200 yards/200 meters, pro- vided that traffic conditions allow you to do so.
140nSafe braking
Emergency stops You brake most effectively when you apply maximum pedal pressure in situa- tions requiring it: emergency stops. Since the vehicle maintains steering responsiveness, you can nevertheless avoid possible obstacles with a mini- mum of steering effort.
Pulsation at the brake pedal combined with sounds from the hydraulic circuits indicates to the driver that ABS is in its active mode.
Brake fluid level If the brake fluid level is too low and brake pedal travel has become longer, there may be a malfunction in one of the two brake system's hydraulic cir- cuits.
Proceed to the nearest BMW Sports Activity Vehicle center.
In so doing, increased pressure on the brake pedal may be required, and slight pulling to the side and longer braking distances may result. Please remember to adapt your driving style accord- ingly.<
Disk brakes When the vehicle is driven only occa- sionally, during extended periods when the vehicle is not used at all, and in operating conditions where brake appli- cations are less frequent, there is an increased tendency for corrosion to form on rotors, while contaminants accumulate on the brake pads. This occurs because the minimal pressure that the pads must exert to clean the rotors during brake applications is not reached.
If the brake rotors are corroded, they will tend to respond to braking with a pulsating effect that even extended application will fail to cure.
When driving in wet conditions and in heavy rain, it is advisable to apply light pressure to the brake pedal from time to time. Monitor traffic conditions to ensure that this maneuver does not endanger other road users. The heat generated in this process helps dry the pads and rotors to ensure that the brak- ing force is then immediately available when required.
Extended or steep mountain descents should be driven in the gear in which only minimal periodic brake application is required. This avoids excessive strain
on the brakes and possible impairment of braking action.
Do not drive with the clutch pedal depressed, at idle or with the
engine switched off, as otherwise there will be no engine braking effect or power assistance for braking and steer- ing. BMW recommends having brake inspections performed at a BMW Sports Activity Vehicle center only. If you do not, parts of the 4-wheel drive system could be damaged. No floor mats, carpets or other objects may lie in the area of pedal travel, as otherwise pedal operation may be impaired.<
Brake pads For your own safety: use only brake pads that BMW has
approved for your particular vehicle model. BMW cannot evaluate non- approved brake pads to determine if they are suited for use, and therefore cannot ensure the operating safety of the vehicle if they are installed.<
141n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Information for your safety The condition of the tires and the main- tenance of the specified tire pressure are crucial not only to the tire's service life, but also to driving comfort and most importantly, driving safety.
Checking pressure Only check tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When tires are warm, the tire inflation pressure increases.
Check the tire inflation pressure regularly and correct it as needed,
even on the spare wheel: at least twice a month and before starting long trips. If you fail to observe this precaution, you may be driving on tires with incorrect tire pressures, a condition that can not only compromise your vehicle's driving stability, but also lead to tire damage and the risk of an accident. Do not drive with deflated, i.e. flat, tires. A flat tire will seriously impairs your vehicle's handling and braking response. Attempts to drive on a flat tire can lead to loss of control over the vehicle.<
After correcting the inflation pres- sure(s), always reinitialize the Flat
Tire Monitor, refer to page 99.<
Inflation pressures for factory- installed tires The tire inflation pressure specifications for your factory-installed tires at ambi- ent temperature are listed on the edge of the driver's door and can be con- sulted when the door is open.
Inflation pressures The tire pressure tables in the following pages give all of the pressure specifica- tions for the tire sizes indicated at ambi- ent temperature.
The inflation pressures apply to the tire sizes and tire brands
respectively approved and recom- mended by BMW; a list of these is avail- able from your BMW Sports Activity Vehicle center.<
5 3
0 d
e 2
2 5
Tire inflation pressure
142nTire inflation pressure
For correct identification of the right tire inflation pressure for your tires, observe the following:
>Tire sizes for your vehicle >Load conditions >Maximum allowable driving speed
Tire inflation pressures for driving up to 100 mph or 160 km/h:
For normal driving up to 100 mph or 160 km/h adjust pressures to the respective tire inflation pressures listed on the following page in the traveling speeds column for normal driving at speeds up to a maximum of 100 mph or 160 km/h to achieve optimum driving comfort.
The permissible top speed for these tire inflation pressures is
100 mph or 160 km/h. Do not exceed this speed, as otherwise tire damage and accidents may result.<
Tire inflation pressures for driving above 100 mph or 160 km/h:
In order to drive at maximum speeds in excess of 100 mph or
160 km/h, please observe, and, if nec- essary, adjust tire pressures for speeds exceeding 100 mph or 160 km/h from the relevant table on the following pages. Otherwise tire damage and acci- dents could occur.<
143n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Tire inflation pressure
BMW Tire size Pressure specifications in psi/kPa Traveling speeds up to a max. of
100 mph/160 km/h
Traveling speeds including those exceeding
100 mph/160 km/h
All pressure specifications in the table are indicated in psi/ kilopascal with cold tires, cold = ambient temperature
X5 3.0i
235/65 R 17 104 H M+S 255/55 R 18 105 H M+S
32/220 33/230 32/220 32/220 32/220 39/270
Front: 255/50 R 19 103 V Rear: 285/45 R 19 107 V Front: 275/40 R 20 102 W Rear: 315/35 R 20 106 W
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
39/270
39/270
You will find more information on permissible loads and weights on page 182.
144nTire inflation pressure
BMW Tire size Pressure specifications in psi/kPa Traveling speeds up to a max. of
100 mph/160 km/h
Traveling speeds including those exceeding
100 mph/160 km/h
All pressure specifications in the table are indicated in psi/ kilopascal with cold tires, cold = ambient temperature
X5 4.4i
235/65 R 17 104 H M+S 255/55 R 18 105 H M+S
32/220 33/230 32/220 33/230 32/220 39/270
Front: 255/50 R 19 103 V Rear: 285/45 R 19 107 V Front: 275/40 R 20 102 W Rear: 315/35 R 20 106 W
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
32/220
39/270
39/270
X5 4.8is
Front: 275/40 R 20 102 W Rear: 315/35 R 20 106 W 255/55 R 18 105 H M+S
32/220
32/220
35/240 35/240
32/220
32/220
35/240 35/240
33/230
33/230
39/270 39/270
Compact wheel: T 155/80 R 19 114 M
61/420
You will find more information on permissible loads and weights on page 182.
145n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Tire identification marks
Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires.
Tire size
Speed code letter:
Q = up to 105 mph/160 km/h T = up to 118 mph/190 km/h H = up to 131 mph/210 km/h V = up to 150 mph/240 km/h W = up to 167 mph/270 km/h
Tire Identification Number Tires with DOT codes meet the guide- lines of the U.S. Department of Trans- portation.
e.g.
Nominal width in mm
Cross-sectional ratio in
Belted construction radial
Rim diameter in inches
Load index, not with ZR tires
Speed code letter, with ZR tires before the R
235/65 R 17 104 H
DOT code:
Tire age The manufacturer of your BMW recom- mends that all tires, i.e. including the spare wheel, be replaced regardless of the actual wear after 6 years at the lat- est.
The tire's date of manufacture is indi- cated on the sidewall: DOT... 2605 indicates that the tire was manufactured in week 26 of 2005.
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:
e.g.
Manufacturer's code for tire brand
Tire size and tire model
Tire age
DOT xxxx xxx 2605
DOT Quality Grades Tread wear
Traction AA A B C
Temperature A B C
All passenger car tires must con- form to Federal Safety Require-
ments in addition to these grades.<
Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled condi- tions on a specified government test course.
For example, a tire graded 150 would wear one and one-half, 1, times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual condi- tions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road char- acteristics and climate.
146nTire identification marks Wheel/tire condition
Traction The traction grades, from highest to lowest, are AA, A, B, and C.
Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on speci- fied government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
The traction grade assigned to this tire is based on straight-ahead
braking traction tests, and does not include acceleration, cornering, hydro- planing, or peak traction characteris- tics.<
Temperature The temperature grades are A, the highest, B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled condi- tions on a specified indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive tem- perature can lead to a sudden flat tire. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
The temperature grade for this tire is established for a tire that is
properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible a tire failure.<
M+S Winter and all-season tires. These have better winter properties than summer tires.
Wheel/tire damage Inspect your wheels and tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread pattern depth.
Please note that low-profile tires make your wheels, tires and sus-
pension parts more susceptible to road hazard and consequential damages. Unusual vibrations encountered during normal vehicle operation can indicate tire failure or some other vehicle mal- function. This can, for example, be caused by driving over curbs. This is also true for irregularities in the vehi- cle's handling characteristics, such as a pronounced tendency to pull to the left or right. Should this occur, respond by immediately reducing your speed. Carefully proceed or have your vehicle towed to the nearest BMW Sports Activity Vehicle center or tire dealer to have the wheels or tires inspected. Tire damage, extending to sudden and complete loss of pressure in extreme cases, can pose a potentially lethal safety hazard for the vehicle's occu- pants and other road users alike.<
147n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Wheel/tire condition
Tire tread The tread depth should not fall below 0.12 in/3 mm although, for example, European regulations only require a minimum tread depth of 0.063 in/ 1.6 mm.
At tread depths below 0.12 in/3 mm, there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface.
As winter tires display a noticeable loss in their ability to cope with cold- weather driving conditions once the tread wears to below 0.16 in/4 mm, you should always have such tires replaced to ensure continued safety.
Wear indicators at the tread-groove base are distributed over the tire's cir- cumference and are marked on the side of the tire with TWI Tread Wear Indi- cator. If the tire tread has worn down to the wear indicators, then the legally permissible tread depth limit of 0.063 in/1.6 mm has been reached.
5 3
0 d
e 4
2 3
148nReplacing wheels/tires
Have new wheels and tires installed only by your BMW Sports
Activity Vehicle center or tire shop that works according to BMW repair proce- dures with correspondingly trained per- sonnel. If this work is not carried out properly, there is a danger of subse- quent damage and related safety haz- ards.<
Retreaded tires BMW does not recommend the use of retreaded tires, otherwise
driving safety may be reduced. The rea- son for this is that possible variations in the design and aging which could be substantial of the tire casing can result in a limited service life.<
The right wheels and tires BMW recommends that you use only wheel and tire combinations
that BMW has tested and approved for your particular vehicle. Variations in fac- tors such as manufacturing tolerances mean that even wheels and tires with identical official size ratings could actu- ally have different dimensions than the approved units these differences could lead to body contact, and with it the risk of severe accidents. If non- approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot be held liable for driving safety.<
You can ask your BMW Sports Activity Vehicle center for the correct wheel/tire combination.
The correct wheel/tire combination also affects various systems whose function would otherwise be impaired, e.g. ABS, DSC, xDrive.
To maintain good handling and vehicle response, use only tires of a single tread configuration from a single manu- facturer. After tire damage, always remember to have the original wheel and tire combination remounted on the vehicle as soon as possible.
Recommended tire brands: BMW recommends particular tire brands for each tire size. You will rec- ognize them by the clearly visible BMW identification on the tire sidewall.
With proper use, these tires meet the highest standards for safety and han- dling characteristics.
5 3
0 d
e 4
2 4
149n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Replacing wheels/tires Snow chains*
Special features of winter tires BMW recommends winter tires for use in cold winter driving conditions. Although all-season M+S tires provide better winter traction than summer tires, they generally fail to provide the same levels of cold-weather perfor- mance as winter tires.
When switching to winter tires, observe the description under Tire condition, page 146, and Replacing wheels/tires.
Observing speed ratings:
Never exceed the maximum speed for which the winter tires
are rated. Unprofessional attempts by laymen to service tires can lead to dam- age and accidents. Have this work per- formed by skilled professionals only. The technicians at your BMW Sports Activity Vehicle center will be glad to assist you with the required profes- sional knowledge and specialized equipment.<
Storage Store wheels or tires in a cool, dry place, protecting them against light whenever possible. Always protect tires against all contact with oil, grease and fuels. Do not exceed the maximum tire infla- tion pressure indicated on the side wall of the tire.
Only certain fine-link snow chains are tested, classified as road-safe, and rec- ommended by BMW. Consult your BMW Sports Activity Vehicle center for details. Use is only permitted in pairs on the rear wheels with the following tire sizes:
X5 4.8is: 255/55 R 18 All other models: 235/65 R 17
Follow the manufacturer's instructions when installing snow chains. Do not exceed a maximum speed of 30 mph/ 50 km/h.
Do not initialize the Flat Tire Moni- tor after mounting snow chains, as
the monitor may then incorrectly indi- cate flat tires. When you are driving with snow chains, it can be beneficial to switch off DSC briefly, refer to page 93.<
150nHood
Unlocking Pull the lever located under the left side of the instrument cluster.
Never attempt to perform any ser- vice or repair operations on your
vehicle without the required profes- sional technical training. If you are not familiar with the regulations to be observed, only have work on your vehi- cle carried out by a BMW Sports Activ- ity Vehicle center or a workshop that uses personnel trained in accordance with BMW requirements. If this work is not carried out properly, there is a dan- ger of subsequent damage and related safety hazards.<
5 3
0 d
e 2
9 5
Opening Pull the release handle and open the hood.
5 3
0 d
e 2
9 6
Closing Allow the hood to fall from a height of about 12 in/30 cm so that it audibly engages.
Observe the same precautions that apply to all closing operations
by ensuring that the hood's travel range is clear and unobstructed before allow- ing the hood to fall into position. If you discover that the hood is not completely closed while driving, stop immediately and close it securely.<
5 3
0 d
e 3
6 9
151n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
1 Engine oil dipstick 152
2 Brake fluid reservoir, located beneath the microfilter cover 155
3 Auxiliary terminal for jump starting 174
4 Coolant expansion tank 154
5 Engine oil filler neck 152
6 Reservoir for windshield and headlamp washer system 152
Engine compartment essentials
5 3
0 d
e 3
4 1
152nWasher fluid Engine oil
Windshield and headlamp washer system Approximate capacity is 8.2 US quarts/ 7.8 liters.
Fill with water and if required with the addition of a washer antifreeze, according to manufacturer's recom- mendations.
We recommend that you mix the washer fluid before adding it to
the reservoir.<
Antifreeze agent for the washer systems is flammable. For this
reason, keep it away from sources of flame and store it only in its original containers. Store it so that it is inacces- sible to children. Comply with the instructions on the containers.<
5 3
0 d
e 2
9 8
Checking oil level Oil consumption depends on driving style and operating conditions.
1. With the engine at operating temper- ature, i.e. after at least 6 miles/10 km of continuous driving, park the vehi- cle in a horizontal position
2. Switch off the engine 3. After approx. 5 minutes, pull the dip-
stick out and wipe it off with a clean lint-free cloth, paper towel, or similar material
5 3
0 u s1
0 0
4. Slide the dipstick carefully all the way into the dipstick tube and pull it out again. The oil level should be in between the two marks on the dipstick
5. Slide the dipstick all the way into the dipstick tube again.
153n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Engine oil
The oil volume between the two marks on the dipstick corresponds to approx. 1.1 US quarts/1 liter.
Do not fill beyond the upper mark on the dipstick. Excess oil will
damage the engine.<
X5 4.8is: With a very sporty driving style, the engine oil level should be at the upper mark on the dipstick.
5 3
0 u s2
0 5
Adding engine oil Wait until the level has dropped to just above the lower mark on the dipstick before adding oil.
Add oil within the next 30 miles/ 50 km, otherwise, the engine
could be damaged.<
Keep oil, grease, etc. out of reach of children and heed warnings on
the containers to avoid health risks.<
Oil change: Have oil changed only by your BMW Sports Activity Vehicle center or by a repair shop that works according to BMW guidelines with appropriately trained personnel.
5 3
0 d
e 3
2 6
Specified engine oils The quality of the engine oil selected has critical significance for the opera- tion and service life of an engine. Based on extensive testing, BMW has approved only certain engine oils.
Only use approved BMW High Perfor- mance Synthetic Oil.
If you are unable to obtain BMW High Performance Synthetic Oil, you can add small amounts of other synthetic oil in between oil changes. Only use oils with the API SH specification or higher.
Ask your BMW Sports Activity Vehicle center for details concern-
ing the specific BMW High Performance Synthetic Oil or synthetic oils which have been approved.<
You can also call BMW of North Amer- ica at 1-800-831-1117 or visit this web- site: www.bmwusa.com to obtain this information.
Never use oil additives as they can damage your engine under some
circumstances.<
154nEngine oil Coolant
Viscosity ratings Viscosity is the oil flow rating as estab- lished in SAE classes.
The selection of the correct SAE class depends on the climatic conditions in the area where you typically drive your BMW.
Approved oils are in SAE classes 5W-40 and 5W-30.<
These oils may be used for driving in all ambient temperatures.
Do not open the cooling system when the engine is hot. Escaping
coolant can cause burns.<
Coolant is comprised of water and coolant additive. Not all commercially available additives are suitable for your BMW. Your BMW Sports Activity Vehi- cle center knows which additives are suitable.
Use only suitable additives, other- wise you could damage your
engine. The additives can be harmful to your health.<
Always observe all applicable environmental rules and regula-
tions when disposing of coolant addi- tives.<
Checking coolant level 1. The engine must be at ambient tem-
perature. 2. Start by turning the cap of the expan-
sion tank counterclockwise. Pause to allow any accumulated pressure to escape, then open.
3. The coolant level is correct when the end of the red float is aligned with the upper edge of the filler opening, refer to the arrow in the illustration, or max. 0.8 in/2 cm higher, i. e. up to the mark on the float, refer also to the schematic diagram, next to the cap.
5 3
0 u s1
0 2
155n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Coolant Brake fluid
4. When necessary, slowly add coolant until the correct level is reached; do not overfill.
5. Close the cap and tighten snugly. 6. Have the cause of the coolant loss
corrected as soon as possible.
Brake fluid level If the warning lamp lights up or the message CHECK BRAKE FLUID appears in the Check Control: stop immediately. The brake fluid in the reservoir has fallen to below the minimum level.
Add brake fluid The brake fluid reservoir is located under the microfilter housing trim panel on the driver's side of the vehicle. For adding brake fluid or for determining and correcting the cause of brake fluid loss, consult your BMW Sports Activity Vehicle center. Your BMW Sports Activ- ity Vehicle center is familiar with the specifications for factory-approved DOT 4 brake fluids.
Brake fluid loss may result in extended brake pedal travel. For this situation, refer to the notes on page 140.
Brake fluid is hygroscopic, that is, it absorbs moisture from the air
over time. In order to ensure the safety and reli- ability of the brake system, have the brake fluid changed every two years by a BMW Sports Activity Vehicle center. Refer also to the Service and Warranty Information Booklet for US models or the Warranty and Service Guide Book- let for Canadian models. Brake fluid is toxic and also damages vehicle paintwork. Always store these agents in tightly-closed original con- tainers kept well away from the reach of children. Do not spill the fluid and do not refill the brake fluid reservoir to beyond the MAX mark. The brake fluid could ignite upon contact with hot engine parts and cause serious burns.<
Always observe all applicable environmental rules and regula-
tions when disposing of used brake fluid.<
156n
The BMW Maintenance System helps maintain the road and driving safety of your BMW.
Please keep in mind that regular main- tenance is not only necessary for the safety of your vehicle, but also plays a significant role in maintaining the resale value of the vehicle.
Service Interval Display Conventional systems rely solely on distance traveled to determine when service is due. The BMW Maintenance System, on the other hand, began many years ago to take the actual conditions under which the vehicle is driven into consideration. After all, different drivers can accumulate mileage in very differ- ent ways.
3 9
0 u s0
0 8
From the point of view of maintenance, 62,000 miles/100,000 km accumulated in short-distance urban driving are not the equivalent of the same distance covered at moderate speeds in long- distance highway travel.
The BMW Maintenance System includes the Engine Oil Service and Inspections I and II.
Determining the maintenance intervals according to the actual loads on the vehicle covers every kind of operating situation. However, even those who drive only short distances, significantly less than 6,000 miles/10,000 km annu- ally, should have the engine oil changed at least every 2 years since oil deterio- rates over time, regardless of use.
Service and Warranty Information Booklet for US models/Warranty and Service Guide Booklet for Canadian models For additional information on mainte- nance intervals and procedures, please refer to the Service and Warranty Infor- mation Booklet for US models or the Warranty and Service Guide Booklet for Canadian models.
As a precaution against corrosion, it is advisable to have the body checked for damage from rocks or gravel at the same time, depending upon operating conditions.
Have your BMW Sports Activity Vehicle center do the mainte-
nance and repair. Be sure that all maintenance work is confirmed in the Service and Warranty Information Booklet for US models or the Warranty and Service Guide Book- let for Canadian models. These entries will constitute your proof that the vehicle has received regular maintenance. They are also required for warranty claims.<
Car care For all information on this subject, refer to the Caring for your vehicle brochure.
The BMW Maintenance System
157n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
OBD interface socket
The interface socket for the Onboard Diagnostics is located on the left of the driver's side at the bottom of the instru- ment cluster and under a cover. The cover has the letters OBD on it.
The purpose of the OBD system is to ensure proper operation of the emission control system for the vehicle's lifetime. The system monitors emission-related components and systems for deteriora- tion and malfunction.
An illuminated indicator lamp informs you of the need for ser- vice, not of the need to stop the
vehicle. However, the systems should be checked by your BMW Sports Activ- ity Vehicle center at the earliest possi- ble opportunity.
5 3
0 u s1
0 5
Display of the previously described malfunction in Cana- dian models.
Under certain conditions, the indicator lamp will blink or flash. This indicates a rather severe level of engine misfire. When this occurs, you should reduce speed and consult the nearest BMW Sports Activity Vehicle center as soon as possible. Severe engine misfire over only a short period of time can seriously damage emission control components, especially the catalytic converter.
When the filler cap is not properly tightened, the OBD system can
detect the vapor leak and the indicator lamp will light up. If the filler cap is sub- sequently tightened, the indicator lamp should extinguish within a few days.<
Event Data Recorders Your vehicle may be equipped with one or more sensing and diagnostic mod- ules or a recording device capable of recording or transmitting certain vehicle data or information. In addition, if you have a Subscription Service Agree- ment for the BMW Assist system, cer- tain vehicle information may be trans- mitted or recorded in order to provide such services.
158n
159n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
Repairs
160n
Under the cargo floor cover in a pocket.
5 3
0 u s1
0 6
Front 1. Move the wiper to a fold-out position,
refer to page 69 2. Lift the wiper arm and press the
securing spring, refer to arrow 3. Pull the wiper blade off toward the
wiper arm 4. Insert the new blade and snap it into
place.
Fold the wipers back down onto the windshield before you turn the
ignition key to position 1 or 2 again. If you do not, they could be damaged.<
5 3
0 d
e 3
0 0
Rear 1. Hold the wiper blade on the window
and remove/unclip the wiper arm at the articulated joint, refer to arrow
2. Insert a new wiper blade and press it on/clip it into the wiper arm.
Use only wiper blades approved by BMW.<
5 3
0 d
e 3
0 1
Onboard tool kit Windshield wiper blades
161n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Lamps and bulbs
The lamps and bulbs make essential contributions to the safety of your vehi- cle. For this reason, follow the instruc- tions below carefully when replacing a bulb. If you are not familiar with any of the procedures, consult your BMW Sports Activity Vehicle center.
Never touch the glass on new bulbs with your bare fingers, as
even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean cloth, paper napkin, or a similar mate- rial, or hold the bulb by its metallic base.<
A replacement bulb set is available from your BMW Sports Activity Vehicle cen- ter.
To prevent short circuits, before working on any electrical system,
equipment or accessory you should always switch it off and disconnect the cable from the battery's negative termi- nal before starting. To avoid possible injury or equipment damage when replacing bulbs, follow any instructions provided by the bulb manufacturer.<
Releasing lamp cover The illustration shows the right-hand side of the engine compartment.
1 Halogen low beams Turn cover cap to left, refer to arrow
2 High beams and parking lamps Press tab downward, refer to arrow
For checking and adjusting head- lamp aim, please contact your
BMW Sports Activity Vehicle center.<
5 3
0 d
e 3
5 7
1 Halogen low beams H7 bulb, 55 watts
The bulb is pressurized. There- fore, wear safety glasses and pro-
tective gloves. Otherwise there is a danger of injury if the bulb is acciden- tally damaged during replacement.<
1. Remove the cover 2. Turn the bulb holder to the left and
remove 3. Pull bulb out of bulb holder by base
and replace.
5 3
0 d
e 3
5 8
162nLamps and bulbs
2 Halogen high beams H1 bulb, 55 watts
The bulb is pressurized. There- fore, wear safety glasses and pro-
tective gloves. Otherwise there is a danger of injury if the bulb is acciden- tally damaged during replacement.<
1. Remove the cover 2. Disconnect the plug 3. Unhook wire spring 4. Remove and replace the bulb.
5 3
0 d
e 3
5 9
3 Parking lamps and roadside parking lamps 10 watt bulb: H 10 W
1. Remove the cover 2. Disconnect the plug 3. Turn reflector module with bulb to
left and remove 4. Replace module with bulb.
Xenon lamps* The operating life of these lamp units is extremely long and the likelihood of failure very low, provided that they are not switched on and off a very great number of times. If one of these bulbs should nevertheless fail, it is possible to continue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this.
To avoid risk of potentially fatal injuries: owing to the extremely
high voltages at which these units oper- ate, service work should always be entrusted to qualified personnel.<
Front turn signals/side-marker lamps Bulb S8 yellow
Please contact a BMW Sports Activity Vehicle center in case of a malfunction.
Side turn signals 5 watt bulb: WY 5 W
1. Use finger pressure against the rear end of the lamp, refer to arrow, to press it forward for removal
2. Apply gentle pressure to the bulb while turning it to the left and pull it out
3. Replace the bulb.
5 3
0 d
e 3
0 4
163n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Lamps and bulbs
Front fog lamps H11 bulb, 55 watts
The bulb is pressurized. There- fore, wear safety glasses and pro-
tective gloves. Otherwise there is a danger of injury if the bulb is acciden- tally damaged during replacement.<
1. Pull the cover in front of the fog lamp forward.
2. Loosen the two screws, refer to arrows, and remove the fog lamp. When pulling out, overcome initial resistance and turn the headlamp slightly to the left.
3. Pull the cable connector off the bulb. 4. Turn the bulb to the left and remove.
5 3
0 d
e 3
5 6
5. Insert a new bulb in the headlamp and turn as far to the right as possi- ble.
6. Connect the plug connector to the bulb, ensuring proper engagement.
Tail lamps 21 watt bulbs: P 21 W and PY 21 W, recommendation: BMW special bulbs with neutral coloration
1 Turn signal
2 Rear lamp/side marker lamp
3 Backup lamp
4 Brake lamp
5 Reflector
5 3
0 u s2
3 5
164nLamps and bulbs
Lamps in the side panel:
1. Open the cover in the side panel 2. Lift the side panel if necessary 3. Apply gentle pressure to the bulb
holder while turning it to the left for removal and replacement
4. Remove the bulb.
5 3
0 d
e 3
0 5
Lamps in the tailgate:
1. Unclip the trim panel in the tailgate with a screwdriver
2. Apply gentle pressure to the bulb holder while turning it to the left for removal and replacement
3. Remove the bulb.
Center brake lamp LED strip in the rear spoiler: please contact a BMW Sports Activity Vehicle center in case of a malfunction.
5 3
0 d
e 3
0 6
License plate lamps 5 watt bulb
1. Press the lamp out to the side with a screwdriver
2. Remove the lamp and replace the bulb.
5 3
0 d
e 3
0 7
165n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Lamps and bulbs Changing a wheel
Light-emitting diodes LEDs Light-emitting diodes installed behind translucent lenses serve as the light source for many of the controls and dis- plays in your vehicle. The concept behind their operation is related to that employed for lasers.
Do not remove the covers, and never stare into the unfiltered light
several hours, as irritation of the retina could result.<
Safety precautions to observe in the event of a flat and during all
tire changes: Park the vehicle as far as possible from passing traffic. Park on a firm, flat, sur- face. Switch on the hazard warning flashers. Turn the steering wheel to the straight- ahead position, remove the key and engage the steering lock. Shift into 1st or reverse, selector lever in Park with automatic transmission, and engage the handbrake. All passengers should be outside the vehicle and well away from your imme- diate working area, behind a guardrail, for instance. If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regula- tions. Change the wheel only on a level, firm surface that is not slippery. The vehicle or the jack could slip to the side if you attempt to raise the vehicle on a soft or slippery surface such as snow, ice, tiles, etc.
Position the jack on a firm support sur- face. Do not place wooden blocks or similar objects under the jack. If this is done, the jack might not be able to reach its full support capacity because of the limited height. To avoid serious or fatal injury: never lie under the vehicle, and never start the engine while it is sup- ported by the jack.<
Your BMW has either a compact wheel for temporary use to ensure your mobil- ity, or a spare wheel of the size 235/ 65 R 17. Please observe the differences in handling when removing the wheel from the cargo area.
166nChanging a wheel
What you will need In order to avoid rattling noises later, note the position of the tools when you remove them and return them to their original position when you are through using them.
>Two wheel chocks Open liftgate and tailgate. Raise the floor panel flap or pull-out cargo floor in the cargo area, refer to page 128 or 129. On vehicles with a compact wheel, remove the cover, refer to page 167. Remove the wheel chocks, refer to arrow, next to the spare wheel
5 3
0 u s1
1 7
>Lug wrench Located beside the spare wheel
5 3
0 u s1
2 0
>Handle for the jack Remove from its holder
5 3
0 d
e 4
0 5
167n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Changing a wheel
>Jack Remove the rubber band from the holder, refer to arrow, and take out the jack. Following use, crank down the vehi- cle jack completely again and clip in the crank.
5 3
0 d
e 4
0 4
Compact wheel Remove the cover under the floor panel flap. Vehicles with pull-out cargo floor: the cover is secured at the rear on both sides with quick-release locks.
1. Loosen the wing nut 1 2. Remove the plate 2 to the side 3. Remove the wheel.
5 3
0 d
e 3
0 9
Spare wheel* 1. Loosen the wing nut 1 2. Remove the plate 2 to the side 3. Unscrew the threaded rod 3 com-
pletely.
5 3
0 u s1
1 8
168nChanging a wheel
Removal aid for spare wheel By using this device, you do not have to lift the spare wheel out of the recess by hand. Its task is to help you to move the wheel onto the tailgate, from where you can easily lift it off.
1. Close the tailgate again 2. Grasp the handle of the removal aid
behind the spare wheel with both hands and pull upward over the tail- gate, refer to arrow.
5 3
0 d
e 3
1 0
3. Hook both buckles into the latch of the tailgate, refer to arrow; the tail- gate is released.
5 3
0 d
e 3
1 1
4. Remove the support rod from the bracket.
5 3
0 d
e 3
1 2
169n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Changing a wheel
5. Press the tailgate down and hold it there. The spare wheel is now pulled by means of the removal aid onto the tailgate.
Hold the tailgate in the opened position and do not allow it to
spring upward abruptly. If you do so, there is a risk of vehicle damage and injury.<
5 3
0 d
e 3
1 3
6. Insert the support rod in the tailgate lock and press down until it engages, refer to arrow 1; then lock hook of rod in striker, refer to arrow 2.
Make sure that the support rod is locked firmly in place. If you fail to
do so, the tailgate could move upward quickly and cause personal injury and vehicle damage.<
7. You can now release the locked tail- gate and take down the spare wheel. It is recommended that you leave the tailgate locked into place until you have completed the wheel change and placed the wheel with the defec- tive tire into the removal aid.
5 3
0 d
e 3
1 4
Procedure 1. Read carefully and comply with the
safety precautions on page 165. 2. Secure the vehicle to prevent it from
rolling: Place the wedges chocks behind the wheels on the side opposite the side you are lifting. If the vehicle is parked on a downward slope, place the wedges securely in front of the wheels. If the wheel must be changed on a surface with a more severe slope, take additional precau- tions to secure the vehicle from roll- ing.
3. Loosen the lug bolts 1/2-turn. 4. Insert the jack handle into the jack,
refer to the illustration in the next col- umn.
170nChanging a wheel
5. Position the jack at the jacking point closest to the flat tire so that the jack base is vertically below the jacking point and the entire surface of the head of the jack will move into the square recess of the jacking point, refer to the illustration detail, when the jack is cranked.
6. Jack the vehicle up until the wheel you are changing is raised from the ground.
7. Unscrew the lug bolts and remove the wheel.
8. Remove accumulations of mud or dirt from the mounting surfaces of the wheel and hub. Clean the lug bolts.
9. Move the spare wheel into position. Secure the wheel by turning at least two lug bolts into opposite bolt holes.
5 3
0 d
e 2
3 6
10. Screw in the remaining lug bolts. Tighten all the bolts securely in a diagonal pattern.
11. Lower the jack and remove it from beneath the vehicle.
12. Tighten the lug bolts in a diagonal pattern.
13. Check and correct the tire inflation pressure at the earliest opportunity. After mounting the spare wheel or correcting the inflation pressure, reinitialize the Flat Tire Monitor, refer to page 99.
Protect valve stems and valves from dirt using screw-on valve stem caps. Dirt in the valve stems frequently leads to slow leaks.
The vehicle jack is designed for changing wheels only. Do not
attempt to raise another vehicle model with it or to raise any load of any kind. To do so could cause accidents and personal injury. To ensure safety, always have the lug bolts checked with a calibrated torque wrench as soon as possible to ensure that they are tightened to the specified torque. The tightening torque is 101 lb ft/140 Nm.<
Store the wheel and the tools in the order opposite that for removal.
Before removing the support rod, be sure that the tailgate is held
down firmly. If you fail to do so, it could spring upward abruptly and cause per- sonal injury and vehicle damage. After you remove the rod, close the tail- gate carefully. Continue to hold it firmly until it is completely closed.<
If light-alloy wheels other than Genuine BMW light-alloy wheels have been mounted, it may be necessary to use different lug bolts for those wheels.
Replace the defective tire as soon as possible and have the new wheel/tire balanced.
Driving with compact wheel Drive reservedly and do not exceed a maximum speed of 50 mph/80 km/h.
Altered handling characteristics, such as reduced track stability during brak- ing, longer braking distances and altered self-steering properties at the driving limit can occur. These proper- ties are more apparent in conjunction with winter tires.
171n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Changing a wheel Vehicle battery
Only one compact wheel may be mounted. Wheels and tires of the
original size should be mounted again as soon as possible.<
Driving with spare wheel* Do not exceed a speed of 130 mph/210 km/h, otherwise tire
damage could lead to accidents.<
With certain wheel-and-tire com- binations the size of the spare
wheel differs from that of the other wheels. To restore the original state, the normal wheel should be remounted as soon as possible.<
Battery posts, terminals and related accessories contain lead
and lead compounds. Wash hands after handling.<
Battery care The battery is maintenance-free, that is, the original electrolyte will normally last for the service life of the battery under moderate climatic conditions. Your BMW Sports Activity Vehicle center will be glad to advise in all matters con- cerning the battery.
Charging battery Only charge the battery in the vehicle via the terminals in the engine compart- ment with the engine off. For correct connections, refer to Jump starting on page 174.
Disposal Following replacement, have old batteries disposed of by your
BMW Sports Activity Vehicle center or turn them over to a recycling center. Maintain the battery in an upright posi- tion for transport and storage. Always restrain the battery to prevent it from tipping over during transport.<
Power failure Following a temporary power failure, e.g. in the case of a dead battery, some equipment is subject to restricted use and must be reinitialized. Individual set- tings are also lost and must be updated again:
>Seat, mirror and steering wheel memory The positions must be stored again, refer to page 50
>Time and date Have to be updated again, refer to page 82
>Activation time for parked car ventilation Has to be updated again, refer to page 84.
172nFuses
In glove compartment Open the fuse cover in the glove com- partment by the indentations on the right and left.
5 3
0 u s1
2 1
In cargo area Open the right cover by pulling the handle.
Never attempt to repair a blown fuse, and do not replace a defec-
tive fuse with a substitute of another color or amperage rating, as this could lead to a circuit overload, ultimately resulting in a fire in the vehicle.<
5 3
0 u s1
2 2
173n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
The Roadside Assistance of the BMW Group offers you assistance in the event of a breakdown around the clock, also on weekends and public holidays.
The phone numbers of the Roadside Assistance control center in your home country can be found in the BMW Dealer Directory.
In the case of vehicles with the corre- sponding equipment, you can use but- tons in the headliner to contact Road- side Assistance or initiate an emergency call.
When the emergency call is initiated, a telephone connection with the BMW Assist response center is established.
In vehicles with activated BMW Assist, if the current position of your vehicle can be determined, it is transmitted to the BMW Assist response center.
The requirements for initiating an emer- gency call or contacting Roadside Assistance:
> Ignition key in position 1 >The car phone is logged on to a
mobile telephone network >The emergency call system is opera-
ble.
1 Initiating an emergency call
2 Establishing contact to Roadside Assistance
Initiating an emergency call* Press button 1 for at least 2 seconds. The LED in the button lights up. As soon as the voice connection to the BMW Assist response center has been established, the LED flashes. If the LED flashes, but you are unable to hear the response center, you can still be heard by the response center.
5 3
0 u e 2
6 1
For technical reasons, the emer- gency call cannot be guaranteed
under the most unfavorable condi- tions.<
Under certain conditions, an emer- gency call is initiated automatically immediately after a severe accident. The automatic emergency call is not affected by the button being pressed.
Roadside Assistance* Press button 2 for at least 2 seconds.
With the BMW Assist activated, the cur- rent position of your vehicle will be transmitted in the specific country.
Receiving assistance
174nJump starting
When your battery is discharged, you can use two jumper cables to start your vehicle with power from the battery in a second vehicle. You can also use the same method to help start another vehi- cle. Use only jumper cables with fully- insulated clamp handles.
To avoid the risk of potentially fatal injury, always avoid all con-
tact with electrical components while the engine is running. Carefully observe the following instructions to avoid per- sonal injury and/or damage to one or both vehicles.<
Preparing 1. Check whether the battery of the
other vehicle has a voltage of 12 Volts and approximately the same capacitance in Ah. This information can be found on the battery.
2. Switch off the engine of the support vehicle.
3. Switch off any electrical systems and components in both vehicles.
Ensure that no contact exists between the bodywork on the two
vehicles, otherwise there is a danger of short circuits.<
Connecting jumper cables To avoid personal injury from sparks, always follow this
sequence when connecting jumper cables.<
On your BMW the so-called jump-start connection point in the engine com- partment acts as the battery positive terminal, also refer to the engine com- partment overview on page 151. The cover cap is marked with +.
1. Fold up the cap of the BMW jump- start connection point, refer to arrow.
2. Attach one end of the positive/+ jumper cable to the positive terminal of the battery or a jump-start connec- tion point of the vehicle providing assistance.
3. Connect the second terminal clamp of the positive/+ jumper cable to the positive terminal of the battery or a jump-start connection point of the vehicle to be started.
5 3
0 d
e 3
2 5
175n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Jump starting Tow-starting and towing
Your BMW is equipped with a special nut on the left side panel as a body ground or negative terminal, refer to arrow in illustration.
4. Attach one end of the negative/ jumper cable to the negative terminal of the battery or to an engine or body ground of the vehicle providing assistance.
5. Connect the second terminal clamp of the negative/ jumper cable to the negative terminal of the battery or to the engine or body ground of the vehicle to be started.
5 3
0 u s1
2 7
Starting engine 1. Start the engine on the support vehi-
cle and allow it to run for several min- utes at a fast idle.
2. Start the engine on the other vehicle in the usual way. If the first start attempt is not suc- cessful, wait a few minutes before another attempt in order to allow the discharged battery to recharge.
3. Let the engines run for a few min- utes.
4. Disconnect the jumper cables by reversing the connection sequence.
Depending on the cause of the mal- function, have the battery recharged by your BMW Sports Activity Vehicle cen- ter.
Never use spray fluids to start the engine.<
Using tow fitting The screw-in tow fitting is stored beneath the cargo floor cover. Carry it with you at all times. It can be screwed in at the front or rear of the vehicle.
Only use the tow fitting that comes with the vehicle and screw
it in as far as it will go. Use the tow fit- ting for towing only on the roadway. Avoid lateral loading of the tow fitting, e.g. do not lift the vehicle by the tow fit- ting. Otherwise damage to the tow fit- ting and the vehicle can occur.<
176nTow-starting and towing
Access to screw thread Front: Use a screwdriver to press the right or left cover out, refer to arrows.
5 3
0 d
e 3
7 0
Rear: Pull the cover off.
Being towed Make sure that the ignition key is in position 1, otherwise the steer-
ing lock could engage and it would not be possible to steer the vehicle. When the engine is stopped, there is no power assist. This requires increased braking and steering effort.<
Switch on the hazard warning flashers depending on the local regulations. If the electrical system fails, mark the vehicle to be towed, e.g. with a sign or warning triangle in the rear window.
5 3
0 d
e 3
1 8
Do not exceed a towing speed of 30 mph/50 km/h and a towing dis-
tance of 95 miles/150 km, otherwise the automatic transmission may be damaged.<
Manual transmission: Gearshift lever in idle position
Automatic transmission: Selector lever in N.
Towing methods In some countries, towing with a tow bar or rope on public roads is not per- mitted. Familiarize yourself with all regulations on towing in the respective country.
With tow bar:
The towing vehicle may not be lighter than the vehicle to be
towed, otherwise handling will be uncontrollable.<
The tow fitting of both vehicles should be on the same side. If an angled posi- tion of the bar cannot be avoided, be aware of the following:
177n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Tow-starting and towing
>The freedom of movement is restricted during cornering
>The angled position of the tow bar creates lateral forces.
Only attach the tow bar to the tow fittings, as attachment to other
vehicle parts can lead to damage.<
With tow-rope: When starting off in the towing vehicle, make sure that the tow-rope is taut.
Use nylon ropes or nylon straps for towing, and avoid all exces-
sively sudden jerking movements. Only attach tow ropes to the tow fittings, as attachment to other vehicle parts can lead to damage.<
With tow truck:
Do not tow the X5 with the front or rear axle raised individually, other-
wise the wheels may lock and the transfer case may be damaged.<
The X5 may only be transported on a flat bed.
5 3
0 d
e 4
0 3
Tow-starting Do not tow-start vehicles with an automatic transmission.
For information on jump starting, refer to page 174.<
Only tow-start vehicles with a catalytic converter with the engine cold. It is bet- ter to jump start the engine, refer to page 174.
1. Switch on the hazard warning flash- ers and observe local regulations.
2. Turn the ignition key to position 2. 3. Shift into 3rd gear. 4. Tow-start with the clutch completely
depressed and slowly release the clutch. After the engine starts, imme- diately depress the clutch again completely.
5. Stop at a suitable location, remove the tow bar or rope and switch off the hazard warning flashers.
6. Have the vehicle checked.
Do not activate the HDC Hill Descent Control during tow-
starting, refer to page 94.<
178n
179n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
Data
180n
An engine performance test is authorized only on an appropriate chassis dynamometer.
X5 3.0i X5 4.4i X5 4.8is
Displacement Number of cylinders
cu in/cm3 181.8/2,979 6
268.4/4,398 8
292.9/4,799 8
Maximum output at engine speed
hp rpm
225 5,900
315 5,400
355 6,200
Maximum torque at engine speed
Ib ft/Nm rpm
214/290 3,500
324/440 3,600
369/500 3,500
Engine specifications
181n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Dimensions
5 3 0
d e 2 1
0 5 3
0 d
e3 6 8
All dimensions are given in inches/mm. Height: with self-leveling suspension 67.2/1,707; without self-leveling suspension 67.5/1,715; X5 4.8is 66.4-67.8/1,668-1,723. Height with roof-mounted luggage rack: with self-leveling
suspension 68.5/1,740; without self-leveling suspension 68.9/1,750. Track width: X5 3.0i 62.0/1,576; X5 4.8is front 61.7/1,566, rear 62.8/1,596. Min. turning circle dia.: 39.7 ft/12.1 meters.
73.7/1,872 85.8/2,180 61.4/1,560 61.4/1,560
111.0/2,820
183.7/4,667
6 7
.2 /1
,7 0
7
8 1
.7 /2
,0 7
6
182nWeights
X5 3.0i X5 4.4i X5 4.8is
Curb weight with manual transmission with automatic transmission
lbs./kg lbs./kg
4,652/2,110 4,696/2,130
4,927/2,235
5,016/2,275
Approved gross vehicle weight with manual transmission with automatic transmission
lbs./kg lbs./kg
6,008/2,725 6,008/2,725
6,008/2,725
6,008/2,725
Load with manual transmission with automatic transmission
lbs./kg lbs./kg
1,356/615 1,312/595
1,080/490
992/450
Approved front axle load lbs./kg 2,712/1,230 2,789/1,265 2,789/1,265
Approved rear axle load lbs./kg 3,307/1,500 3,307/1,500 3,307/1,500
Approved roof load capacity lbs./kg 220/100 Never exceed either the approved axle loads or the gross vehicle weight.
Cargo area capacity cu ft/l 16.4/465, according to DIN 69.01/1,955, according to SAE
183n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Capacities
Notes
Fuel tank including a reserve of: X5 3.0i X5 4.4i, 4.8is
gal./liters
gal./liters gal./liters
approx. 24.6/approx. 93
approx. 2.1/approx. 8 approx. 2.6/approx. 10
Fuel specification: page 26
Windshield washer system with headlamp washer system
quarts/liters approx. 8.2/approx. 7.8 For details: page 152
Engine with oil filter change X5 3.0i X5 4.4i, 4.8is
quarts/liters quarts/liters
8.0/7.5 8.5/8.0
BMW High Performance Synthetic Oil. For details: page 153
184
185n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
Index
Everything from A to Z
A Ability to climb, refer to
Driving on poor roads 138 ABS Antilock Brake
System 91 warning lamp 20
Accessories, refer to For your own safety 9
Accident, refer to Emergency call 173 Roadside Assistance 173
Activated-charcoal filter 112 Adaptive Head Light 101 Adjusting cooling capacity of
rear climate control 112 Adjusting seats 44
electric 46 electric comfort seat 46 mechanical 45 mechanical sports seat 45
Air, drying, refer to Air conditioning 105, 110
Airbags 55 sitting safely 43 warning lamp 21
Air circulation, refer to Recirculated-air mode 105
Air conditioner 104 Air conditioning
air conditioner 105 automatic climate control 110
Air distribution air conditioner 105 automatic climate control 109 individual 109
Airing, refer to Ventilation 106, 111
Air outlets, refer to Ventilation 106, 111
Air pressure, refer to Tire inflation pressure 141
Air recirculation, refer to AUC Automatic recircu- lated-air control 110
Air supply air conditioner 105 automatic climate control 109 rear climate control 112
Air vents, refer to Ventilation 104, 107
Alarm system 38 avoiding unintentional alarms 39
All-season tires, refer to Special features of winter tires 149
All-wheel drive, refer to xDrive 94
Antenna, refer to Caring for your vehicle brochure
Antifreeze coolant 154 washer fluid 152
Antilock Brake System ABS 91 warning lamp 20
Anti-theft alarm system, refer to Alarm system 38
Anti-theft system 30 Anti-trapping
mechanism 40, 42 panorama glass roof 42 power windows 40
Armrest, refer to Storage compartments 119
Artificial leather, refer to Caring for your vehicle brochure
Artificial wood trim, refer to Caring for your vehicle brochure
Ashtray 121 front 121 rear 121
AUC Automatic recirculated- air control 110
Automatic air distribution 109 air supply 109 cruise control 71 headlamp control 100 recirculated-air control AUC 110 steering wheel adjustment 53
Automatic car wash, refer to Caring for your vehicle brochure
Automatic climate control 107
Automatic cruise control 71 Automatic curb monitor 51 Automatic headlamp
control 100 Automatic rear window
washer 71 Automatic Soft Close
function, liftgate 36 Automatic speed reduction
for descents, refer to HDC Hill Descent Control 94
Everything from A to Z 187n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Automatic transmission with Steptronic 65 interlock 62 selector lever interlock 66 shiftlock 66 towing 176 tow-starting 176 warning lamp 20, 21
AUTO program, refer to Automatic air distribution and supply 109
Average fuel consumption 80, 87
Average speed 80, 88 Avoiding alarms 39 Axle loads, refer to
Weights 182
B Backrest contour, refer to
Lumbar support 46 Backrests, refer to Adjusting
seats 45, 46 Backup lamps 65
replacing bulbs 163 Bandages, refer to First-aid
kit 24 Bar, towing 176
Battery 171 disposal 171 indicator lamp 19 jump starting 174 power failure 171 remote control 30
Belts, refer to Safety belts 49 Beverage can holders, refer
to Cup holders 120 Beverage holder, refer to
Cup holders 120 Blower
air conditioner 105 automatic climate control 109 refer to Air supply 105, 109
BMW High Performance Synthetic Oil 153
BMW Maintenance System 156
Bottle holder, refer to Cup holders 120
Brake fluid 155 adding 155 level 155 replacing 155 warning lamp 19
Brake force display 98 Brake hydraulic system 140
warning lamp 19, 20 Brake lamps, replacing
bulbs 163
Brake lights, refer to Brake lamps 163
Brake pads 140 breaking-in 136 warning lamp 19, 21
Brake rotors brake system 140 breaking-in 136
Brakes 140 ABS 91 brake fluid 155 brake pads 140 breaking-in 136 handbrake 64 indicator/warning lamp 19, 20
Brake system brake fluid 155 brake fluid level 140, 155 brake pads 140 breaking-in 136 disk brakes 140 warning lamp 19
Brake wear warning warning lamp 19, 21
Breakdown, Flat Tire Monitor 98
Breakdown assistance, refer to Roadside Assistance 173
Breaking-in 136
Break wear warning, refer to Brake pads 140
Buttons on steering wheel 23
C California Proposition
65 Warning 9 Calling, refer to telephone
Owner's Manual Can holders, refer to Cup
holders 120 Capacities 183 Car care, refer to Caring for
your vehicle brochure Car-care products, refer to
Caring for your vehicle brochure
Care, refer to Caring for your vehicle brochure
Care of paintwork, refer to Caring for your vehicle brochure
Everything from A to Z
Cargo area 124 capacity 182 cover, refer to Roll-up cover 125 emergency operation, refer to Unlocking manually 35, 36 enlarging 124 floor cover 127 lamps 103 lid, refer to Liftgate/ tailgate 35, 36 opening, remote control 31 opening/closing, refer to Liftgate 35 opening/closing, refer to Tailgate 36 opening from inside 35 opening from outside 35
Cargo-area partition net 125 Cargo bay, refer to Cargo
area 124 Cargo floor, pull-out 128 Cargo loading 130 Caring for leather, refer to
Caring for your vehicle brochure
Caring for the carpet, refer to Caring for your vehicle brochure
Car keys, refer to Keys 30
Car phone, refer to separate Owner's Manual
Car phone provision 116 Car radio, refer to Owner's
Manual for Radio/Onboard Computer
Car wash, refer to Caring for your vehicle brochure
Cassette operation, refer to Owner's Manual for Radio/ Onboard Computer
CD changer, refer to Owner's Manual for Radio/Onboard Computer
CD operation, refer to Owner's Manual for Radio/ Onboard Computer
Center armrest, refer to Storage compartments 119
Center brake lamp, replacing bulbs 164
Central locking system 30 interior 34
Changes, technical, refer to For your own safety 9
Changing a wheel 165 Changing gears with
automatic transmission with Steptronic 66
Changing tires 145
Changing wheels compact wheel 167 spare wheel 167
Charge-current indicator lamp 19
Charging battery 171 CHECK button 77 Check Control 77 Child's seat, refer to Child-
restraint systems 57 Child-restraint fixing system
LATCH 59 Child-restraint systems 57 Child-safety locks 60 Chocks 166 Chrome parts, care, refer to
Caring for your vehicle brochure
Cigarette lighter 121, 122 Cigarette lighter socket, refer
to Socket 121 Circulation of air, refer to
Recirculated-air mode 105, 110
Cleaning, vehicle, refer to Caring for your vehicle brochure
Cleaning rear window 71 Climate control in the rear
passenger area 111
Clock 82 12 or 24-hour mode 82 hour signal 83 setting 82 setting, also refer to Owner's Manual for Radio/ Onboard Computer setting time and date 82
Closing from inside 34 from outside 31
Clothes hooks 120 Clutch 136
breaking-in 136 Cockpit 14 Code
activating 88 deactivating 89 establishing 88
Cold starting, refer to Starting engine 63
Combination of wheels/ tires 148
Comfort seat 46 Comfort starting, refer to
Starting engine 63 Compact Disc operation,
refer to Owner's Manual for Radio/Onboard Computer
Compact wheel, changing wheels 167
Everything from A to Z 189n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Compartments, refer to Storage compartments 119
Compass interior rearview mirror 117
Computer 79, 85 also refer to Owner's Manual for Onboard Computer
Condensation, refer to Air conditioning 105, 110
Connecting vacuum cleaner, refer to Sockets 121, 128
Consumption, refer to Average fuel consumption 80 Fuel consumption 87
Consumption display, refer to Energy control 74
Consumption indicator, refer to Fuel gauge 75
Contents 4 Controls, refer to Cockpit 14 Convenience opening mode
panorama glass roof 31 windows 31
Convenience operation from outside 33 panorama glass roof 33 windows 33
Coolant 154 level 154 temperature gauge 76 warning lamp 76
Coolant temperature 76 Coolant temperature
gauge 76 Cooling, maximum 110 Cooling, refer to
Air conditioning 105, 110 Temperature 105, 109
Copyright 4 Cornering light, refer to
Adaptive Head Light 101 Correct tires
wheel/tire replacement 148 winter tires 149
Courtesy illumination, refer to Courtesy lighting 103
Courtesy lighting 103 Cruise control 71
buttons on steering wheel 23 indicator lamp 22
Cruising range 80, 87 Cup holders 120 Curb weight, refer to
Weights 182 Current consumption, refer
to Energy control 74
Cylinders, refer to Engine data 180
D Dashboard, refer to
Cockpit 14 Dashboard lighting, refer to
Instrument lighting 102 Data, technical 180
dimensions 181 engine 180 filling capacities 183 weights 182
Date also refer to Owner's Manual for Onboard Computer changing 82 displaying 82
Daytime driving lamps 100 DBC Dynamic Brake
Control 91 indicator lamp 21
Deactivating the alarm in an emergency 89
Defective lamp 161 Defrosting windows 106, 109
air conditioner 106 automatic climate control 109
Defrosting windows and removing condensation air conditioner 106 automatic climate control 109
Defrost position, refer to Defrosting windows 106, 109
Digital clock 82 also refer to Owner's Manual for Onboard Computer
Digital compass 117 Dimensions 181 Dimming feature, interior
mirror 138 Dipstick, engine oil 152 Directional indicators, refer
to Turn signals 68 Disk brakes 140 Displacement, refer to
Engine specifications 180 Display, refer to Instrument
cluster 15, 17, 18 Display lighting, refer to
Instrument lighting 102 Disposal, vehicle battery 171 Distance to destination 86 Distance warning, refer to
PDC Park Distance Control 90
Everything from A to Z
Divided rear seat backrest, refer to Folding rear seat back 124
Door keys 30 Door lock 33 DOT Quality Grades 145 Draft-free
ventilation 106, 111 Driving lamps, refer to
Parking lamps/low beams 100
Driving notes breaking-in 136 driving hints 137, 138
Driving on poor roads 138 Driving stability control 92 Driving tips, refer to Driving
notes 137 Driving your X5 138 Dry air, refer to Air
conditioning 105, 110 DSC Dynamic Stability
Control 92 warning lamp 22
DVD changer, refer to Owner's Manual for Radio/ Onboard Computer
Dynamic Brake Control DBC 91 indicator lamp 21
Dynamic Stability Control DSC 92 warning lamp 22
E EBV Electronic brake-force
distribution 91 Electrical defect
liftgate 35 tailgate 36
Electrical malfunction automatic transmission with Steptronic 67 door lock 33 driver's door 33 fuel filler door 24 panorama glass roof 42
Electric steering wheel adjustment 52
Electronic brake-force distri- bution EBV 91
Electronic Stability Program ESP, refer to DSC Dynamic Stability Control 92
Emergency call 173 Emergency operation, refer
to Manual operation driver's door 33 fuel filler door 24 liftgate 35 panorama glass roof 42 tailgate 36
Emergency Service, refer to Roadside Assistance 173
Energy-conscious driving, refer to Energy control 74
Energy control 74 Engine
breaking-in 136 data 180 electronic circuitry 22 overheated, refer to Coolant temperature gauge 76 speed 74 starting 62 switching off 63
Engine compartment 151 Engine coolant 154 Engine oil 152
additives, refer to Specified engine oils 153 filling capacity 183 indicator/warning lamp 19 specified engine oils 153
Engine oil level 152 indicator/warning lamp 21
Engine oil pressure, indicator/warning lamp 19
Engine oil temperature gauge 75
Engine output, refer to Engine specifications 180
Engine overheating, refer to Coolant temperature gauge 76
Engine specifications 180 Engine speed, refer to
Engine specifications 180 Environmentally friendly
driving, refer to Energy control 74
ESP Electronic Stability Program, refer to DSC Dynamic Stability Control 92
Event Data Recorders 157 Exhaust system 137 Extended immobilizer
function 88 Exterior mirrors 53
automatic dimming feature 138 folding in and out 54
External air, automatic climate control 110
F Failure messages, refer to
Check Control 77 Failure of a current
consumer 172 False alarms, refer to
Avoiding unintentional alarms 39
Everything from A to Z 191n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Fastening seat belts refer to Safety belts 49
Fasten safety belts warning lamp 21, 49
Fault displays, refer to Check Control 77
Filter, refer to Microfilter 106 Microfilter/activated- charcoal filter 112
First aid, refer to First-aid kit 24
First-aid kit 24 Flashlight 119 Flat, compact wheel 167 Flat tire 165
compact wheel 167 Flat Tire Monitor 98 refer to Changing a wheel 165 refer to Tire inflation pressure 141 spare wheel 167
Flat Tire Monitor 98 false alarms 98 initializing system 99 limits of system 98 show chains 149 warning lamp 99
Flooding, refer to Driving through water 138
Floor mats, refer to Caring for your vehicle brochure
Fluid level, indicator lamp 21 Fog lamps, indicator lamp 22 Folding floor cover up 128 Folding rear backrest 124 Folding rear seat back 124 Footbrake, refer to General
driving notes 137 Footwell lamps 103 For information on breaking
in the differential, refer to Engine and differential 136
Four-wheel drive system, refer to xDrive 94
Front airbags 55 Front fog lamps 102
replacing bulbs 163 Fuel
average consumption 80, 87 display 75 quality 26 volume, refer to Capacities 183
Fuel display, refer to Fuel gauge 75
Fuel filler door 24 manual operation 24
Fuel gauge 75
Fuel-saving driving, refer to Energy control 74
Fuel tank capacity, refer to Capacities 183
Full preparation package mobile phone, refer to separate Owner's Manual
Fuses 172
G Garage-door opener, refer to
Integrated universal remote control 114
Gasoline, refer to Fuel quality 26
Gasoline display, refer to Fuel gauge 75
Gear display 65 Gearshift lever, manual
transmission 64 General driving notes 137 Glove box, refer to Glove
compartment 119 Glove compartment 119 Grills, refer to
Ventilation 106, 111 Gross weight, refer to
Weights 182 Ground clearance 139
H Handbrake 64
indicator lamp 19, 21 Hand lamp, refer to
Rechargeable flashlight 119
Hands-free microphone, refer to Telephone 116
Hands-free system 116 refer to Microphone 116
Hazard warning flashers 14 HDC Hill Descent Control 94 Head airbags 55 Headlamp control,
automatic 100 Headlamp cover, care, refer
to Caring for your vehicle brochure
Headlamp flasher 68 indicator lamp 22
Headlamps care, refer to Caring for your vehicle brochure replacing bulbs 161
Headlamp washer reservoir 152 volume, refer to Filling capacities 183
Headlamp washer system headlamp washing 70 washer fluid 152
Everything from A to Z
Head restraints 47 adjusting 47 installing in front 48 removing and installing in rear 48 removing in front 48 sitting safely 43
Heated mirrors 54 Heated rear window
air conditioner 105 automatic climate control 110
Heated seats 52 Heated steering wheel 53 Heater
rear window 105, 110 steering wheel 53
Heating exterior mirror 54 residual heat utilization 110 seats 52
Heating and ventilation 104, 107
Heating while stationary 110 Heavy cargo, refer to Cargo
loading 131 Heavy-duty cargo straps,
refer to Cargo loading 131 Height, refer to
Dimensions 181
Height adjustment seats 45, 46 steering wheel 52
High beams 101 headlamp flasher 68 indicator lamp 22 replacing bulbs 162
High temperatures 137 Hill Descent Control HDC 94 Hills 138, 140 Holder for cups 120 Hood 150 Horn 14 Hotel function 30 Hot exhaust system 137 Hydraulic brake assistant,
refer to DBC 91 Hydraulic system, brakes 19 Hydroplaning 137, 147
I Ice, refer to Outside
temperature warning 73 Identification, tire 145 Ignition 62 Ignition key 30 Ignition key positions, refer
to Ignition lock 62 Ignition lock 62 Immobilizer function 88 Imprint 4
Independent ventilation, refer to Parked car ventilation 113
Indicating elements 15, 17, 18
Indicator/warning lamp airbags 57 alarm system 38 automatic transmission with Steptronic 67 brakes 155 coolant temperature 76 DSC 92 engine temperature 76 fasten safety belts 49 Flat Tire Monitor 99 front fog lamps 102 reserve 75 self-leveling suspension 95
Indicator and warning lamps, overview 19
Indicator lighting, refer to Instrument lighting 102
Individual air distribution 109 Individual settings, refer to
Vehicle Memory, Key Memory 61
Inflation pressure, tires, refer to Tire inflation pressure 141
Initializing, refer to Power loss 42
INSPECTION 76 Instrument cluster 15, 17, 18
refer to Cockpit 14 Instrument lighting 102 Instrument panel 14 Integrated universal remote
control 114 Interface socket for Onboard
Diagnostics 157 Interior lamps 103
remote control 31 Interior mirror, automatic
dimming feature 138 Interior motion sensor 39
switching off 31, 39 Interior rearview mirror 54
compass 117 Interlock, refer to Steering
lock engaged 62 Intermittent operation of
wipers 69, 71 Interval Display, Service 76
J Jacking points for vehicle
jack 170 Jumpering, refer to Jump
starting 174 Jump starting 174
Everything from A to Z 193n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
K Key Memory 61 Keys 30
key-related settings, refer to Vehicle Memory, Key Memory 61
Kick-down 66
L Lamps, refer to Parking
lamps/low beams 100 Lamps and bulbs 161 Lashing eyes, refer to
Securing load 131 LATCH child-restraint fixing
system 59 Length, refer to
Dimensions 181 License plate lamp,
replacing bulbs 164 Liftgate 35
emergency operation, refer to Unlocking manually 35 opening, remote control 31
Liftgate/tailgate opening from inside 35 opening from the outside 35 unlocking manually 35, 36
Light-alloy wheels, care, refer to Caring for your vehicle brochure
Light-emitting diodes LEDs 165
Lighter 121, 122 Lighting of instruments 102 Lights on warning 100 Light switch 100 Limit 85 Limit speed, refer to Speed
limit 85 Load, refer to Cargo
loading 130 Loading, securing load 131 Lock buttons, doors, refer to
Locking 34 Locking
from inside 34 from outside 31
Locking, vehicle from inside 34 from outside 31
Locking and unlocking doors from inside 34 from outside 31
Low beams 100 automatic 100 replacing bulbs 161
Lower back support, refer to Lumbar support 46
Low-fuel indicator lamp, refer to Fuel gauge 75
Lug bolts 169 torque 170
Luggage compartment capacity 182 opening from inside 35
Luggage compartment, refer to Cargo area 124
Luggage compartment cover, refer to Roll-up cover 125
Luggage compartment lamps, refer to Cargo area lamps 103
Luggage compartment lid refer to Liftgate 35 refer to Tailgate 36
Luggage net, refer to Partition net 125
Luggage rack, refer to Roof- mounted luggage rack 132
Luggage straps 37 Lumbar support 46
M M+S tires, refer to Winter
tires 149 Maintenance, refer to
Service Interval Display 76 Maintenance system 156
Malfunction automatic transmission with Steptronic 67 door lock 33 fuel filler door 24 liftgate 35 panorama glass roof 42 tailgate 36
Manual operation door lock 33 driver's door 33 fuel filler door 24 liftgate 35 panorama glass roof 42 tailgate 36
Manual transmission 64 Master key 30
with remote control 30 Maximum cooling 110 Maximum roof weight 182 Maximum speed with winter
tires 149 Measurements, refer to
Dimensions 181 Mechanical key, refer to
Door and ignition key 30 Mechanical seats 45 Memo 83
Everything from A to Z
Memory, refer to Seat, mirror and steering wheel memory 50 Vehicle Memory, Key Memory 61
Microfilter air conditioner 106 automatic climate control 112
Microphone for telephone, refer to Car phone 116
MID Multi-Information Display displays and controls 81 information display 81
Mirror dimming feature 138 Mirrors 53
automatic curb monitor 51 mirror heating 54 mirror memory, refer to Seat, mirror and steering wheel memory 50
Mobile communications devices in vehicle 137
Mobile phone, refer to separate Owner's Manual
Monitoring pressure of tires, refer to Flat Tire Monitor 98
Multi-function steering wheel, refer to Buttons on steering wheel 23
Multifunction switch turn signals/headlamp flasher 68 washer/wiper system 69
Multi-Information Display MID 81
N Navigation system, refer to
separate Owner's Manual Neck support, refer to Head
restraints 47 Nozzles, refer to
Ventilation 106, 111 Nylon rope, refer to Tow-
starting and towing 177
O OBD interface socket 157 Odometer 73 Oil
additives, refer to Specified engine oils 153 consumption 152 consumption, refer to Engine oil, checking 152 dipstick 152 filling capacity 183 level 152 refilling, refer to Engine oil, adding 153 specified engine oils 153
Oil change interval, refer to Service and Warranty Information Booklet, US models or Warranty and Service Guide Booklet, Canadian models
Oil consumption 152 Oil level 152
checking 152 Oil pressure, indicator/
warning lamp 19 OILSERVICE 76 Oil temperature 75 Old batteries, refer to
Disposal 171 Onboard tool kit 160 Opening and closing
from inside 34 from outside 31 using the door lock 33 using the remote control 31
Output, refer to Engine specifications 180
Outside air, air conditioner 105
Outside temperature display 73 changing unit of measure 73, 80 on onboard computer 80
P Package shelf, refer to Roll-
up cover 125 Panorama glass roof 41
automatic opening and closing 41 closing in the event of an electrical malfunction 42 comfort operation 33 comfort position 42 initializing 42 power failure 42 remote control 31
Park Distance Control PDC 90
Parked car ventilation 113 activating/deactivating switch-on times 84 also refer to Owner's Manual for Onboard Computer entering switch-on times 84 switching on and off directly 84
Parking, vehicle 63 Parking aid, refer to PDC
Park Distance Control 90 Parking assistant, refer to
PDC Park Distance Control 90
Everything from A to Z 195n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Parking brake, refer to Handbrake 64
Parking lamps 100 replacing bulbs 162
Parking lamps/low beams 100
Parts and accessories, refer to For your own safety 9
Passenger-side mirror tilt function 51
Pathway lighting 100 PDC Park Distance
Control 90 Permissible axle load, refer
to Weights 182 Permissible gross weight,
refer to Weights 182 Plastic, care, refer to Caring
for your vehicle brochure Pollen, refer to
Microfilter 106 Microfilter/activated- charcoal filter 112
Power electric seat 46 Power failure 171 Power rear seat backrest 48 Power windows 39
safety switch 40 Pressure, tires 141 Pressure monitoring, tires 98
Flat Tire Monitor 98
Programming settings, refer to Vehicle Memory, Key Memory 61
Protective function, panorama glass roof 42
Pull-out cargo floor 128
R Radio, refer to Owner's
Manual for Radio/Onboard Computer
Radio-control key, refer to Master key with remote control 30
Radio navigation, refer to separate Owner's Manual
Rain sensor 69 Reading lamps
front 103 rear 103
Real wood, refer to Caring for your vehicle brochure
Rear backrests, power 48 Rear climate control 111
air supply 112 temperature 112
Rear lamps refer to Tail lamps 163 replacing bulbs 163
Rear seat back, folding 124
Rear seat backrest, electric 48
Rear-seat backrest, folding down 124
Rear seats, heating 52 Rearview mirror 53 Rear window blinds, refer to
Roller sun blinds 113 Rear window defroster
air conditioner 105 automatic climate control 110
Rear window safety switch 40
Rear window wiper 71 replacing bulbs 160
Rechargeable flashlight 119 Recirculated-air mode
air conditioner 105 automatic climate control 110
Reflectors, refer to Tail lamps 163
Refueling 24 fuel filler door 24
Remaining distance, refer to Cruising range 80, 87
Remaining distance for service, refer to Service Interval Display 76
Remote control 31 garage door opener, refer to Integrated universal remote control 114 liftgate 31 malfunction 32
Removal aid for spare wheel 168
Removing condensation, windows air conditioner 106 automatic climate control 109
Replacement fuses 172 Replacement keys 30 Replacement tire 167 Replacing bulbs, refer to
Lamps and bulbs 161 Replacing light bulbs 161 Replacing tires
changing a wheel 165 tire replacement 145
Reporting an accident, refer to Initiating an emergency call 173
Reporting safety defects 11 Residual heat 110 Restraint systems, refer to
Safety belts 49 Restraint systems for
children 57
Everything from A to Z
Reverse gear automatic transmission with Steptronic 66 manual transmission 65
Roadside Assistance 173 Roadside parking lamps 101
replacing bulbs 162 Roller blind for cargo area,
refer to Roll-up cover 125 Roller sun blinds 113 Roll-up cover 125 Roof-mounted luggage
rack 132 Rope, refer to Tow-starting
and towing 177 Rotating coin holder, refer to
Storage compartments 119
S Safe braking 140 Safety belt height
adjustment 49 Safety belts 49
adjusting belt height 49 care, refer to Caring for your vehicle brochure sitting safely 43 warning lamp 21, 49
Safety belt tensioners, refer to Safety belts 50
Safety defects 11
Safety feature, power windows 40
Safety systems, refer to Airbags 55 Antilock Brake System 91 Brake system 140 DSC Dynamic Stability Control 92 xDrive 94
Screw thread for tow fitting 176
Seat heating 52 Seat memory, refer to Seat,
mirror and steering wheel memory 50
Seats 44 adjusting comfort seat 46 adjusting electrically 46 adjusting sports seat 45 heating 52 memory, refer to Seat, mirror and steering wheel memory 50 sitting safely 43 storing adjustment 50
Securing cargo, refer to Cargo loading 130
Securing load 131 Selector lever, automatic
transmission with Steptronic 66
Selector lever interlock, refer to Changing selector lever positions 66
Selector lever positions, automatic transmission with Steptronic 65
Self-leveling suspension 95 2-axle self-leveling suspension 96 inactive 95
Service, refer to Roadside Assistance 173
Service and Warranty Infor- mation Booklet for US models 156
Service Interval Display 76, 156
Setting interior temperature 105, 109
Setting time, refer to Prese- lecting switch-on times 84
Shifting automatic transmission with Steptronic 66 manual transmission 64
Shiftlock 66 Shoulder support 47 Side airbags 55 Side Impact Head Protection
System 55 Side tilt, permissible 138
Side turn signals, replacing bulbs 162
Side window blinds, refer to Roller sun blinds 113
Signal horn, refer to Horn 14 Signaling briefly 68 Sitting safely 43
with airbags 43 with head restraint 43 with safety belts 43
Ski bag 123 Sliding sunroof, refer to
Panorama glass roof 41 Snow chains 149 Sockets 121 Sockets in cargo area 128 Soft closure aid for liftgate,
refer to Automatic Soft Close function 36
Spare fuses 172 Spare key 30 Spare wheel 167
removal aid 168 Special wash program 70 Specified engine oils 153 Speed
with compact wheel 170 with spare wheel 171 with winter tires 149
Speed limit 85
Everything from A to Z 197n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Speedometer 15, 17, 18 refer to Instrument cluster 15, 17, 18
Sport Program, automatic transmission with Steptronic 67
Sports seat 45 Stability control, refer to
DSC Dynamic Stability Control 92 xDrive 94
Starting, refer to Starting engine 62
Starting engine 62 Starting problems
at very low temperatures 63 jump starting 174
Status of this Owner's Manual at time of printing 9
Steering lock 62 Steering wheel
adjustment 52 buttons on steering wheel 23 entry/exit aid 53 heating 53 lock 62 memory 50
Steering wheel adjustment, automatic 53
Steering wheel heater 53
Steering wheel memory 50 Steering wheel with multi-
function buttons 23 Steptronic, refer to Manual
operation 67 Stopwatch 83 Storage compartments 119 Storage compartments in
cargo area 127 Storage space, refer to
Cargo area 124 Storing desired speed, refer
to Cruise control 71 Storing seat adjustment 50 Storing sitting position, refer
to Seat, mirror and steering wheel memory 50
Storing tires 149 Supply reservoir, washer
systems 152 Switches, refer to Cockpit 14 Switching air conditioner
mode on and off manually 105, 110
Switching off engine 63 Switching on hour signal 83 Switch-on times, entering 84 Symbols 8 Synthetic oil 153
T Tachometer 74
Tailgate 36 emergency operation, refer to Unlocking manually 35, 36 opening, remote control 31 remote control 31 unlocking manually 36
Tail lamps, replacing bulbs 163
Taking time, refer to Stopwatch 83
Tank capacity, refer to Fuel tank capacity 183
Technical data 180 Technical modifications 9 Telephone 116
refer to separate Owners Manual
Telephone provisions, refer to Hands-free telephone operation 116
Temperature air conditioner 105 automatic climate control 109
Temperature display interior temperature 109 outside temperature 73, 80 outside temperature warning 73 setting the units 73, 80
Temperature of coolant, refer to Coolant temper- ature gauge 76
Temperature warning 73 Tempomat, refer to Cruise
control 71 Thigh support adjustment 45 Third brake lamp
refer to Center brake lamp 164 replacing bulbs 164
Three-point belt 49 Tightening torque of lug
bolts 170 Tilt alarm sensor 39
remote control 31 switching off 39
Tilt function, passenger-side mirror 51
Time of arrival 87 Timer, refer to Stopwatch 83 Tire Identification
Number 145 Tire inflation pressure 141
producing 141 Tire inflation pressure
monitoring, refer to Flat Tire Monitor 98
Tire Quality Grading 145
Everything from A to Z
Tires age 145 breaking-in 136 changing 148, 165 condition 146 damage 146 DOT Quality Grades 145 flat 165 inflation pressure 141 size 145 storage 149 traction 146 tread 147 tread wear 145 Uniform Tire Quality Grading 145 wear indicators, refer to Tire tread 147 winter tires 149
Tools, refer to Onboard tool kit 160
Torque engine 180 lug bolts 170
Tow bar 176 Tow fittings 175 Towing the vehicle 175, 176
with automatic transmission 176
Tow-rope 177 Tow sockets for tow
fitting 176
Tow-starting 175 Track width, refer to
Dimensions 181 Traction 146 Traction aid, refer to DSC
Dynamic Stability Control 92
Traction control, refer to DSC Dynamic Stability Control 92
Transmission automatic transmission with Steptronic 65 manual transmission 64
Transmission lockout, refer to P Park 66
Transmission malfunction, refer to Malfunction 67
Transporting children safely 57
Transport securing device, refer to Securing load 131
Tread depth, refer to Tire tread 147
Tread wear 145 Trip-distance counter, refer
to Trip odometer 73 Trip odometer 73 Trunk lamps, refer to Cargo
area lamps 103
Trunk lid, refer to Liftgate 35 Tailgate 36
Turning circle, refer to Dimensions 181
Turn signals 68 indicator lamp 22 replacing bulbs 162, 163
Turn signals, side, replacing bulbs 162
TV function, refer to Owner's Manual for Onboard Computer
TV set, refer to Owner's Manual for Onboard Computer
Two-axle self-leveling suspension display 96 lowering 97 raising 97
U Underbody protection, refer
to Caring for your vehicle brochure
Uniform Tire Quality Grading 145
Units, temperature 73, 80, 109
Universal garage door control, refer to Integrated universal remote control 114
Universal remote control 114 Unlocking
from inside 34 from outside 31 hood 150
Using antifreeze 152, 154
V Vacuum cleaner,
connecting, refer to Sockets 121, 128
Valve inserts 170 screw caps 170
Vehicle battery 171 breaking-in 136 care, refer to Caring for your vehicle brochure cargo loading 130 measurements, refer to Dimensions 181 parking 63 storage, refer to Caring for your vehicle brochure washing, refer to Caring for your vehicle brochure weight 182
Everything from A to Z 199n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
R ep
ai rs
Da ta
In de
x
Vehicle battery 171 Vehicle jack 167
jacking points 170 Vehicle Memory 61 Ventilation 106, 111 Ventilation in the rear 106 Ventilation while parked 113 Viscosity 154 Voice command system 23 Voice control, refer to
separate Owner's Manual Volume, cargo area 182
W Warning and indicator
lamps 19 Warnings, refer to Check
Control 77 Warning triangle 24 Warranty 10
refer also to Service and Warranty Information Booklet for US models or Warranty and Service Guide Booklet for Canadian models
Warranty and Service Guide Booklet for Canadian models 156
Washer fluid 152 Washer fluid reservoir,
content 183
Washer jets, refer to Windshield washer nozzles 70
Washer reservoir, refer to Windshield and headlamp washer system 152
Waste container, refer to Ashtray 121
Water on roads, flooding 138 Wear indicators in tires, refer
to Tire tread 147 Weights 182 Wheel/tire combinations 148 Wheelbase, refer to
Dimensions 181 Wheel bolts, wrench 166 Wheel replacement 148 Width, refer to
Dimensions 181 Windows 39
convenience operation 33 defrosting, refer to Defrosting windows 106, 109 safety switch 40
Windshield defrosting, refer to Defrosting windshield 106, 109 washing 70
Windshield cleaner reservoir volume, refer to Filling capacities 183
Windshield washer, washer fluid 152
Windshield washer fluid reservoir 152
Windshield washer nozzles 70
Windshield washer system, washer/wiper system 69
Windshield wiper blades care, refer to Caring for your vehicle brochure replacement 160
Windshield wipers, refer to Wiper/washer system 69
Winter tires 149 changing 149 condition 146 storage 149
Wiper blade replacement 160
Wiper system 69 Working in the engine
compartment 150 Wrenches/screwdrivers,
refer to Onboard toolkit 160
X xDrive 94 Xenon lamps, replacing
bulbs 162
Y Your individual vehicle 8
So that you will have important speci- fications available when you stop to refuel, we recommend that you fill in this table with data which apply to your vehicle. Consult the index for individual specifi- cations.
Fuel
Please enter your preferred fuel here.
Engine oil
The oil volume between the two marks on the oil dipstick corresponds to approx. 1.1 US quarts/1 liter.
Designation
Quality
Tire inflation pressures Summer tires Winter tires
Front Rear Front Rear
4 persons
5 persons or 4 plus luggage
Refueling
The U
Related manuals for BMW X5 4.4i SAV X5 Series 2006 Owner's Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the X5 Series BMW works, you can view and download the BMW X5 4.4i SAV X5 Series 2006 Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for BMW X5 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a BMW X5 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the BMW X5 4.4i SAV X5 Series 2006 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This BMW X5 4.4i SAV X5 Series 2006 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download BMW X5 4.4i SAV X5 Series 2006 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print BMW X5 4.4i SAV X5 Series 2006 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW X5 4.4i SAV X5 Series 2006 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.