BMW M5 Sedan 5 Series 2003 Owner's Manual PDF
en
Summary of Content for BMW M5 Sedan 5 Series 2003 Owner's Manual PDF
Owner's Manual for Vehicle
M5
Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:
Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new BMW. The manual contains important data and instructions intended to assist you in obtaining maximum satisfaction from your BMW's unique array of advanced technical fea- tures. It also contains information on vehicle maintenance designed to enhance operating safety while simultaneously helping you to maintain your BMW's value throughout an extended service life. For additional information refer to the supple- mental manuals.
This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information.
We wish you an enjoyable driving experience.
BMW M
Preface
Contents
N o
te s
re s
About this Ow Symbols used Your individua Status at time For your own Symbol on veh Service and W Reporting safe
Opening and closing:
e wner's Manual 8 Cockpit 14
C o
n tr
o ls
a n
d f
e at
u Keys 26 Central locking system 26 Opening and closing
via the door lock 27 Opening and closing
via the remote control 28 Opening and closing
from the inside 31 Luggage compartment lid 32 Luggage compartment 34 Alarm system 35 Electric power windows 36 Sliding/tilt sunroof 38
Adjustments: Sitting safely 40 Seats 40 BMW M sport seat 41
steering wheel memory 45 Seat heating 46 Steering wheel 47 Mirrors 48
Contents
bleached without chlorine, suitable for recycling.
O ve
rv i8
l vehicle 8 of printing 9 safety 9 icle parts 10 arranty 10 ty defects 10
Instrument cluster 15 Indicator and warning lamps 16 Steering wheel with multifunction
buttons 19 Warning triangle 20 First-aid kit 20 Refueling 20 Fuel specifications 22 Tire inflation pressure 22
2002 BMW M GmbH Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order no. 01 41 0 156 830 US English IX/02 Printed in Germany Printed on environmentally friendly paper
5n
w
Interior conveniences:
BMW Universal Transmitter 93
u re
s Passenger safety systems: Airbags 49
Technology for safety and driving convenience:
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Glove compartment 96 Storage compartments 96 Cellular phone 97 Beverage holder 97 Ashtray, front 97 Cigarette lighter 98 Ashtray, rear 98
Loading and transporting cargo: Through-loading system 99 Ski bag 100 Cargo loading 102 Roof-mounted luggage rack 103
Everything under control: Odometer, outside temperature
display 63
pleasant driving: Automatic climate control 87 Roller sun blind 92
Re pa
ir s
Da ta
In de
x
C o
n tr
o ls
a n
d f
e at Transporting children safely 51
Vehicle Memory, Key Memory 55
Driving: Steering/Ignition lock 56 Starting the engine 56 Switching off the engine 57 Parking brake 58 Manual transmission 58 Turn signal/Headlamp flasher 59 Washer/Wiper system/
Rain sensor 60 Cruise control 61
Park Distance Control (PDC) 78 Dynamic Stability Control
(DSC) 80 M Dynamic Driving Control 81 Flat Tire Monitor 82
Lamps: Parking lamps/Low beams 84 Instrument lighting 85 High beams/Standing lamps 85 Fog lamps 85 Interior lamps 86 Reading lamps 86
Controlling the climate for
Tachometer 64 Engine oil temperature 64 Fuel gauge 64 Coolant temperature gauge 65 Service Interval Display 65 Check Control 66 Multi-Information Display
(MID) 69 Digital clock 70 Computer 73
Parked-car ventilation 92
Contents
re s
Replacement procedures:
c e Special operating instructions: In the engine compartment:
O w
n e
r se
rv ic
e p
ro c
e d
u Onboard tool kit 124 Windshield wiper blades 124 Lamps and bulbs 124 Repairing a flat tire 128 Battery 131 Fuses 132
Assistance, giving and receiving: Jump-starting 133 Towing the vehicle 135
65 Warning 120 OBD interface socket 121
O p
e ra
ti o
n , m
ai n
te n
an
Break-in procedures 106 Driving notes 107 Antilock Brake System 107 Brake system 108
Wheels and tires: Tire inflation pressure 109 Tire condition 109 Tire replacement 110 Wheel and tire
combinations 111 Special characteristics of winter
tires 112 Snow chains 112
Hood 113 Engine compartment
essentials 114 Washer fluids 115 Engine oil 115 Coolant 117 Brake fluid 118
Maintenance: The BMW Maintenance
System 119
Laws and regulations: Technical modifications 120 California Proposition
7n
w
d at
a
n d
e xEngine data 140
Dimensions 141 Everything from A to Z 146
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
T e
c h
n ic
al IWeights 142 Capacities 143
8n
Identifies systems or components, which can be activated or adapted t an individual driver's require- ("Vehicle Memory", "Key ry"). Refer to page 55. tion and adjustments on some of
systems can be performed at MW center.
individual vehicle
ying your BMW, you have ed in favor of a model with individ- d equipment and features. This r's Manual describes all models quipment that BMW offers within me group.
Notes
About this Owner's Manual We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find certain topics is by using the detailed index at the end. If you are looking for a brief initial summary of the essentials, please turn to the first chapter.
Should you wish to sell your BMW at some time in the future, please remember to hand over this Owner's Manual to the new owner; it is an important part of the vehicle.
If you have any questions, your BMW
Symbols used Indicates precautions that must be followed precisely in order to
avoid the possibility of personal injury and serious damage to the vehicle.
Contains information that will assist you in gaining the optimum
benefit from your vehicle and enable you to care more effectively for your vehicle.
Refers to measures that can be taken to help protect the environ-
ment.
pe you will understand that ment and features are included you might not have chosen for ehicle. You can easily identify any nces with the aid of the asterisk *
to identify all optional equipment ccessories.
r BMW features equipment which described in this Owner's al, Supplementary Owner's als are enclosed. We ask you to hese manuals as well.
center will be glad to advise you. < Marks the end of a specific item of information.
* Indicates special equipment, country- specific equipment and optional extras.
t Identifies index entries that refer to owner service procedures or topics on vehicle maintenance.
Notes Symbols
to sui ments Memo Activa these your B
Your On bu decid ualize Owne and e the sa
We ho equip which your v differe used and a
If you is not Manu Manu read t
9n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Important safety information! For your own safety, use genuine
ts and accessories approved by W. en you purchase accessories tested approved by BMW and Original W Parts, you simultaneously acquire assurance that they have been thor- hly tested by BMW to ensure imum performance when installed our vehicle.
W warrants these parts to be free defects in material and workman- .
W will not accept any liability for ages resulting from installation of
ts and accessories not approved by
Notes
Status at time of printing BMW pursues a policy of continuous, ongoing development designed to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Nor can errors and omissions be entirely ruled out. We therefore request your understanding for the fact that we are unable to recognize any legal claims based on the data, illustrations or descriptions in this manual.
For your own safety Use unleaded gasoline only. Fuels containing up to and including
10 % ethanol or other oxygenates with up to 2.8 % oxygen by weight i.e. 15 % MTBE or 3 % methanol plus an equivalent amount of co-solvent will not void the applicable warranties covering defects in materials or work- manship. Field experience has indi- cated significant differences in fuel quality volatility, composition, addi- tives, etc. among gasolines offered for sale in the United States and Canada. The use of poor-quality fuels may result in driveability, starting and stalling problems, especially under certain
Re pa
ir s
Da ta
In de
x
W. W cannot test every product from r manufacturers to verify if it can be
d on a BMW safely and without risk ither the vehicle, its operation, or its upants. inal BMW Parts, BMW Accessories other products approved by BMW, ther with professional advice on g these items, are available from all
W centers.
Status at time of printing
environmental conditions, such as high ambient temperature and high altitude. Should you encounter driveability prob lems that you suspect could be related to the fuel you are using, we recom- mend that you respond by switching to a recognized high-quality brand. Failure to comply with these recom- mendations may result in unscheduled maintenance. Obey pertinent safety rules when you are handling gasoline.<
Your individual vehicle
par BM Wh and BM the oug opt on y BM from ship BM dam par
-
BM BM othe use to e occ Orig and toge usin BM
10n
rting safety defects
llowing only applies to vehicles d and operated in the US.
believe that your vehicle has a t which could cause a crash or cause injury or death, you should diately inform the National ay Traffic Safety Administration A in addition to notifying BMW of America, LLC, P.O. Box 1227, ood, New Jersey 07675-1227,
hone (800) 831-1117.
SA receives similar complaints, it pen an investigation, and if it that a safety defect exists in a
Notes
Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones including operation of any portable cellular phone from within the vehicle without using an externally-mounted antenna or trans- ceiver equipment, e.g., CBs, walkie- talkie, ham radio or similar accessories, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system, or affect the validity of the BMW Limited Warranty. See your BMW center for additional information.<
Service and Warranty This manual is supplemented by a Ser- vice and Warranty Information Booklet for US models or a Warranty and Ser- vice Guide Booklet for Canadian models.
We recommend that you read this publication thoroughly.
Your BMW is covered by the following warranties: >New Vehicle Limited Warranty >Rust Perforation Limited Warranty >Federal Emissions System Defect
Warranty >Federal Emissions Performance War-
of vehicles, it may order a recall medy campaign. However, A cannot become involved in indi- l problems between you, your r, or BMW of North America, LLC.
ntact NHTSA, you may either call uto Safety Hotline toll-free at -424-9393 or 366-0123 in ington, DC area or write to: A, U.S. Department of Transpor- , Washington, D.C. 20590. You lso obtain other information about vehicle safety from the Hotline.
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any automotive repair establishment or individual using any certified auto- motive part.<
Symbol on vehicle parts Indicates that you should consult the relevant section of this
Owner's Manual for information on a particular part or assembly.
ranty >California Emissions Control System
Limited Warranty
Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
For your own safety
Repo The fo owne
If you defec could imme Highw NHTS North Westw Telep
If NHT may o finds
To co the A 1-800 Wash NHTS tation can a motor
11n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
12n
13n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Overview
14n
Cockpit
ams 84
s 59
9
3 Fog lamps 85
4 Wiper/Washer system 60
5 Central locking system 26
6 Hazard warning flashers
r window defroster 90
n: the entire surface
usting the steering wheel 47
1 Parking lamps/Low be
2 >Turn signal indicator >Standing lamps 85 >High beams 85 >Headlamp flasher 5 >Computer 77
3 9 m
d e1
4 7
7 Rea
8 Hor
9 Adj
15n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Instrument cluster
Re pa
ir s
Da ta
In de
x
rn signal
h beams 18
ine oil 64
gauge 65
7 Indicator and warning lamps 16 to 18
8 CHECK button 66
9 Outside temperature display 63
10 Indicator lamp for Dynamic Stabil Control (DSC) 17
11 Trip odometer 63
Check Control display 66
Odometer 63
Service Interval Display 65
Trip odometer, reset to zero 63
Indicator and warning lamps 16 to 18
1 Fuel gauge 64
2 Indicator lamp for tu indicator 18
3 Speedometer
4 Indicator lamp for hig
5 Tachometer and eng temperature gauge
6 Coolant temperature
3 9 m
u s0
0 4
ity
12
13
14
15
16
16n
Indicator and warning lamps
Brake hydraulic system
Have the brake fluid level checked. Before driving further,
re to read the notes on pages 108 18.
dicator lamp comes on together he "CHECK BRAKE LININGS" age in the Check Control.
Brake hydraulic system warning lamp for Canadian models.
l l
be su and 1
The in with t mess
Technology that monitors itself The system runs a check on the warning and indicator lamps marked by "" each time you switch on the ignition. They each light up once for dif- ferent periods of time.
If a fault should occur in one of these systems, the corresponding lamp does not go out after the engine is started or it lights up while the vehicle is moving. The following section describes how you should respond.
Red: stop immediately Alternator charge current The battery is no longer being charged. Indicates a defective
alternator drive belt or a problem with the alternator's charge circuit. Please contact the nearest BMW center.
You should never attempt to con- tinue driving with a defective drive
belt, as the engine could overheat and sustain serious damage. A defective drive belt will also make the vehicle harder to steer.<
Engine oil pressure
PRESS" in the Check Control display panel: stop the vehicle immediately and switch off the engine. Check level of oi in engine, top up as required. If oil leve is correct: please contact the nearest BMW center.
Do not continue driving, as the engine could sustain serious
damage from inadequate lubrication.<
17n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
s
Indicator and warning lamps
Dynamic Brake Control (DBC)
Malfunction in DBC system. ventional braking performance ains available with no loss of effi- cy. e the system repaired by your BMW ter at the earliest possible opportu- . additional information: refer to e 80
Dynamic Brake Control (DBC) warning lamp for Canadian models.
Service Engine Soon
If the indicator lamp lights up either continuously or intermit-
ly, this indicates a fault in the emis- s-related electronic systems.
n- le
r.
an
r al-
Con rem cien Hav cen nity For pag
tent sion
Re pa
ir Da
ta In
de x
ough the vehicle remains opera- al, you should have the systems cked at your BMW center at the iest possible opportunity. additional information: refer to OBD rface socket, page 121
Service Engine Soon warning lamp for Canadian models.
n, W
Alth tion che earl For inte
Red: an important reminder Parking brake Comes on when you engage the parking brake.
For additional information: refer to page 58
Parking brake warning lamp for Canadian models.
Please fasten safety belts An acoustic signal sounds and a message appears in the Check
Control for 4 to 8 seconds. The acous- tical signal remains on until the belt is fastened. For additional information on safety
Yellow: please have checked at your earliest opportunity
Antilock Brake System (ABS)
ABS has been deactivated in response to a system malfunction. Co ventional braking efficiency is availab and unrestricted. Please have the system inspected at your BMW cente For additional information: refer to page 107
ABS warning lamp for Canadi models.
Dynamic Stability Control (DSC)
belts: refer to page 44
Airbags
Please have the system inspected at your BMW center.
For additional information: refer to page 49
DSC has been switched off o has been deactivated because of a m function. In the event of a malfunctio have the system checked at your BM center. For additional information: refer to page 80
18n
Indicator and warning lamps
Green: for your information Turn signal indicators Flashes when the turn signal indicators are on. Rapid
flashing: indicates a system malfunc- tion. For additional information: refer to page 59
Cruise control Lights up when system is on: available for operation via the
multifunction steering wheel. For additional information: refer to page 61
Front fog lamps
Blue: for your information High beams Lights up when the high beams are on as well as when the
headlamp flasher is activated. For additional information: refer to pages 59, 85
Lights up whenever you switch on the front fog lamps.
For additional information: refer to page 85
19n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Steering wheel with multifunction buttons
me
ise control: select a stored setting.
ise control: store and accelerate (+) ecelerate and store ().
ise control: activate/interrupt/deac- te.
s-
nd n
n
t
Volu
Cru
Cru or d
Cru tiva
In de
x
The controls integrated within the multi- function steering wheel (MFL) have been designed to allow you to operate a number of accessories both quickly and safely, without taking your eyes from the road:
>Selected control functions for the radio along with CD and cassette player
> the cruise control >selected telephone functions* and >voice entry*.
The controls are active only when the corresponding systems and
accessories are switched on.<
Switch between phone and radio, ca sette and CD.
Forward:
>Radio Press briefly: station scan in FM ba Extended pressure: search functio
>CD Press briefly: track scan Extended pressure: search functio in track
>Cassette Press briefly: stop track scan or fas
Press briefly: Receive a phone call, initiate dialing, terminate a call. Extended pressure: Activate/deactivate voice entry.
forward Extended pressure: fast forward
>Phone Scan personal phone book.
Reverse: functions as forward.
20n
Warning triangle
*
First-aid kit
*
Refueling
filler door Before filling the tank, shut off the engine. If you do not, fuel cannot
Fuel
3 9 4 d
e7 2 9
ed into the tank and the Service e Soon lamp may come on.<
en the filler door, press its front
lectrical malfunction occurs, you nlock the fuel filler door manually:
e the handle to lower the trim el on the right side of the luggage partment
l the button with the fuel pump bol.
be fill Engin
To op edge.
If an e can u
1. Us pan com
2. Pul sym
The hazard warning triangle is readily accessible. It is stored in the container for the onboard tool kit mounted in the luggage compartment lid.
3 9 4 d
e0 5 3
Under the front passenger's seat.
To remove: lift the button on the front (arrow) and pull the first-aid kit forward out of its support.
3 9 0 d
e7 1 6
To open the container, loosen the wingnut(s).
Always observe all legal regula- tions requiring a warning triangle
to be carried in the vehicle.<
To store: position the first-aid kit in the support, then push back until the button engages.
Some of the articles contained in the first-aid kit have a limited
storage life and should be replaced at periodic intervals. Please check the expiration dates of each of the items regularly, and replace any whose expiration dates have passed. You can acquire replacements in any drugstore or pharmacy. Always observe all legal regulations requiring a first-aid kit to be carried in the vehicle.<
21n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Refueling
Refill early to avoid damaging the catalytic converter; never attempt
rive to the last drop of fuel in the .<
k capacity: approx. 18.5 gal. liters), with reserve of approx. gal. (10 liters).
Close the fuel filler cap carefully after refueling until a click is
rd. While closing, be sure not to eeze the strap which is fastened to cap. A loose or missing cap will vate the message "CHECK FILLER " in the Check Control.<
el pt p, .<
he g
or
to d tank
Tan (70 2.5
hea squ the acti CAP
In de
x
p-
Always observe all safety notices posted at the service station when
refueling. Never carry spare fuel con- tainers in your vehicle. Whether empty or full, these containers can leak, cause an explosion, or lead to fire in the event of a collision.<
Simple and environmentally friendly
Open the fuel filler cap carefully prevent fuel from spraying out. Fu
3 9 4 d
e1 2 0
spray may cause injury. Do not attem to continue adding fuel to the last dro as this practice can cause fuel to spill
Keep the fuel filler cap in the bracket attached to the fuel filler door.
When refueling, insert the filler nozzle completely into the filler pipe. Pulling t nozzle out of the pipe during refuelin
> results in premature pump shutoff >and will reduce the effect of the vap
recovery system on the pump.
As long as the filler nozzle is used pro erly, the fuel tank is full whenever the nozzle shuts off the first time.
22nFuel specifications Tire inflation pressure
Check tire inflation pressures on a regular basis, at least every two s, and before every extended y. Otherwise, incorrect tire pres- an lead to driving instability, tire ge and accidents.<
ply with tire approval ifications flation pressures in the table
to BMW approved tire sizes and anufacturers. Your BMW center is ar with these pressures. Higher ures may be specified for tires by other manufacturers.
vehicle is equipped with tires
week journe sure c dama
Com spec The in apply tire m famili press made
Your
which also E mend appro
The engine uses lead-free gasoline only.
Required fuel:
>Premium Unleaded Gasoline, min. 91 AKI. AKI = Anti Knock Index
Never use leaded fuel, as it would cause permanent and irreparable
damage to both the oxygen sensor and the catalytic converter.<
The inflation pressures are indicated on a warning sticker attached to the B-pillar behind the driver's door (visible with door open).
3 9 0 d
e6 9 7
Check tire pressures All pressure specifications are indicated in psi (kilopascal) for tires at ambient temperature (refer also to the next page).
After correcting the inflation pres- sures in the tires, reactivate the
Flat Tire Monitor, refer to page 82.<
23n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire inflation pressure
) )
Re pa
ir s
Da ta
In de
x
BMW Tires All pressure specifications in the table are indicated in psi (kilopascal) with cold tires (cold = ambient temperature)
M5 245/40 ZR 18 35 (240) - 44 (300) - 275/35 ZR 18 - 38 (260) - 48 (330 235/45 R 17 94 H M+S 35 (240) 38 (260) 39 (270) 46 (320
24n
Controls
25n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
26nKeys Central locking system
oncept entral locking system is ready for tion when both front doors are d. The system engages and es the locks on the rs age compartment lid
l filler door.
entral locking system can be ted outside via the driver's door lock ell as via the remote control inside via the central locking
tem button.
el filler door is not locked when
The c The c opera close releas >doo > lugg > fue
The c opera > from
as w > from
sys
The fu
you o (refer is aut activa outsid locks locke vated
1 The master keys with remote control determine the functions of the Key Memory. Refer to page 55. You can mark individual keys for sub-
4 6 3 d
e0 2 3
2 Spare key for storage in a safe place such as in your wallet. This key is not intended for continuous use
3 Door and ignition key The lock for the glove compartment cannot be operated with this key. This is recommended for valet parking, for instance
sequent identification by applying the colored decals that you received when accepting delivery of your vehicle
There is an extended-life battery in every master key that is
charged automatically in the ignition lock as you drive. For this reason, if you have a master key that is not in regular use, you should use that key approx. once every year while driving for an extended period to charge the battery. For addi- tional information refer to page 28.<
27n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Central locking system Opening and closing via the door lock
nvenience operation can also operate the electric power dows and the sliding/tilt sunroof via door lock.
o open: with the door closed, turn e key to the "Unlock" position and
old it o close: with the door closed, turn e key to the "Lock" position and
old it.
Watch the closing process care- fully and be sure that no one is
ped by the closing motion. easing the key stops the opera- .<
or
s
Co You win the
>T th h
>T th h
trap Rel tion
Re pa
ir s
Da ta
In de
x
nual operation he event of an electrical malfunc- )
n the key all the way to the extreme or right to unlock/lock the driver's r.
e or.
:
s)
Ma (in t tion
Tur left doo
When you use the central locking system to lock the doors from inside the vehicle, it will automatically disen- gage the locks if an accident occurs, except on doors that have been locked individually using the lock buttons, refer to page 31. The accident response rou- tine also includes automatic activation of the hazard warning flashers and the interior lamps.
Using the key One turn of the key in the driver's do lock unlocks the driver's door only. Turning the key a second time unlock
3 9 0 d
e7 2 3
all of the remaining doors, the luggag compartment lid and the fuel filler do
Vehicles without armored glass do not lock the vehicle if anyone
will be remaining inside, as it would then be impossible for the occupant( to disengage the locks from the inside.<
You can have a signal set as an acknowledgment message that
the vehicle is locked correctly.<
28n
Opening and closing via the remote control
er keys with remote control
Since passengers or animals remaining in the vehicle might be o lock the doors from the inside, he vehicle's keys with you so that hicle can be opened again from tside at any time.<
Master keys that are used repeat- edly are always ready for opera- ince the battery in the key is ed automatically in the ignition s you drive. no longer possible to unlock the le via the remote control, the y is discharged. Use this key driving for an extended period in to recharge the battery. For more ation refer to page 26. nt unauthorized use of the remote l by surrendering e.g. only the nd ignition key 3 or the spare
(refer to page 26) when leaving hicle for valet parking. event of a system malfunction, e contact your BMW center, which your source for replacement
-
Mast
able t take t the ve the ou
tion, s charg lock a If it is vehic batter while order inform Preve contro door a key 2 the ve In the pleas is also keys.<
The concept The remote control gives you an excep- tionally convenient method for unlocking and locking your vehicle. Fur- thermore, it provides two additional functions that can only be executed by means of the remote control:
>To switch on interior lamps, refer to page 29 With this function, you can also "search for" your vehicle when parked in an underground garage, for instance
>To open the luggage compartment lid, refer to page 29 The luggage compartment lid will
1 Unlock, convenience opening and alarm system
2 Lock and secure, interior lamp activa tion, disarming tilt alarm sensor and
3 9 0 d
e7 9 3
open slightly, regardless of whether it was previously locked or unlocked
>Panic mode, refer to page 29 In case of danger, you can trigger an alarm.
When you unlock (lock) your vehicle the system automatically deactivates (acti- vates) the anti-theft system and disarms (arms) the alarm system while also switching on (off) the interior lamps.
You can have a signal set as an acknowledgment message that
the vehicle is locked correctly.<
interior motion sensor 3 Open the luggage compartment lid,
panic mode
29n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
x
Opening and closing via the remote control
open the luggage partment lid
ss button.
luggage compartment lid will open htly, regardless of whether the lid previously locked or unlocked.
Before and after a trip, be sure that the luggage compartment lid
not been opened unintentionally.<
ic mode
vided that the alarm system is ed, you can respond to imminent ger by holding down the button for een two and five seconds.
ancel alarm
ss button.
: e
s)
or
.
To com
Pre
The slig was
has
Pan
Pro arm dan betw
To c
Pre
In de
To unlock
Press button.
Press the button once to unlock the driver's door and the fuel filler door only; press a second time to unlock all remaining doors as well as the luggage compartment lid.
Convenience opening mode
Press and hold button to open the elec- tric power windows and sliding/tilt sun- roof.
To lock and secure
Press button.
Vehicles without armored glass Do not lock the vehicle if anyon
will be remaining inside, as it would then be impossible for the occupant( to disengage the locks from the inside.<
To deactivate the tilt alarm sens and the interior motion sensor
Press button a second time immedi-
To switch on the interior lamps
With the vehicle locked, press button
30nOpening and closing via the remote control
l
For US owners only The transmitter and receiver units comply with part 15 of the FCC (Federa Communications Commission) regula- tions. Operation is governed by the following:
FCC ID: LX8EWS LX8FZVS LX8FZVE
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
>This device may not cause harmful interference, and
External systems External systems or devices may cause local interference in the functions of the remote control. If this should occur, you can unlock and lock the vehicle via the door lock with a master key.
> this device must accept any interfer- ence received, including interference that may cause undesired operation.
Any unauthorized modifications to these devices could void the
user's authority to operate the equip- ment.<
31n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Opening and closing from the inside
engage the locks se the central locking button to lock ll of the doors simultaneously, r ress the individual safety lock but- ns down. As an added design fea- re to prevent the driver from being advertently locked out of the
ehicle, the driver's door safety lock utton will not engage as long as the oor is open.
Never use the look buttons while the vehicle is underway, as the
rs would then fail to open automati- y in the event of an accident. e passengers or animals remaining e vehicle might be able to lock the rs from the inside, take the vehicle's s with you so that the vehicle can be ned again from the outside at any .<
rt- be n in
ith
s
or r,
To >U
a o
>p to tu in v b d
doo call Sinc in th doo key ope time
Da ta
In de
x
Use this button to operate the central locking system when the front doors are closed. The doors and luggage compartment lid are unlocked or locked only. The anti-theft alarm system is not
3 9 0 d
e6 9 1
If only the driver's door was unlocked from the outside and
you press the button >all other doors, the luggage compa
ment lid and the fuel filler door will unlocked if the driver's door is ope
> the driver's door will be locked aga when it is closed.<
To unlock and open the doors >Either unlock the doors together w
the button for the central locking system and then pull each of the release handles above the armrest or
>pull the release handle for each do twice: the first pull unlocks the doo
activated. Also, the fuel filler door remains unlocked to allow refueling.
The central locking system can be locked automatically as soon
as you begin to drive, if you desire. You may also have this function pro- grammed into individual keys.<
and the second one opens it.
32nLuggage compartment lid
al operation event of an electrical malfunc-
he master key to the left in the ge compartment lock all the way stop the luggage compartment l open slightly.
ggage compartment is locked as soon as you close the lid.
Manu (in the tion)
Turn t lugga to the lid wil
The lu again
The lock Only the master key (refer to page 26) fits in the lock for the luggage compart- ment lid.
3 9 4 d
e7 8 3
To secure separately Turn the master key to the right past the pressure point and then pull it out in the horizontal position.
3 9 4 d
e7 3 1
To open separately Turn the master key to the left in the luggage compartment lock, continuing until it stops the luggage compart- ment lid will open slightly.
The luggage compartment is locked again as soon as you close the lid.
This locks the luggage compartment and disconnects it from the central locking system. This feature can be used to prevent unauthorized access to the luggage compartment when you hand over the door and ignition key 3 (refer to page 26) for valet parking, etc.
33n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Luggage compartment lid
close handle recess (arrow) next to the mechanism is designed to assist in closing the luggage compart- t lid.
Operate the vehicle only when the luggage compartment lid is
pletely closed. An open lid would w exhaust fumes to penetrate into interior of the vehicle. Should it be olutely necessary to operate the
as To The lock you men
com allo the abs
3 9 4 d
e1 2 8
Da ta
In de
x
icle with the luggage compartment pen: lose all windows. Shut the sliding/ lt sunroof et the automatic climate control for aximum airflow, refer to page 89.<
veh lid o >C
ti >S
m
To open from the outside Press the button (arrow): the luggage compartment lid opens slightly.
The luggage compartment is illumi-
3 9 4 d
e7 2 8
To open from the inside Provided the luggage compartment h not been locked separately, you can use this button to open it when the
3 9 m
d e1
1 7
nated when the luggage compartment lid is opened.
vehicle is stationary.
34nLuggage compartment lid Luggage compartment
er* e left-hand side of the luggage artment is a hanger for fastening ing bags, packages and similar
Hang On th comp shopp
3 9 4 d
e1 4 4
.
Emergency release This lever releases the luggage com- partment lid from the luggage compart- ment's interior.
3 9 0 d
e7 9 2
Luggage net Use the luggage net to secure smaller items of luggage.
3 9 m
d e0
5 0
If you place objects on the luggage net this helps to prevent them from moving
Lashing eyes for attaching flexible straps* to secure your luggage are located in the corners of the luggage compartment. Refer also to "Cargo loading" on page 102.
35n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Alarm system
icator lamp displays he indicator lamp below the interior arview mirror flashes continuously: e system is armed
ed e
- rm
d
Ind >T
re th
3 9 m
d e0
8 4
Re pa
ir s
Da ta
In de
x
he indicator lamp flashes during rming: a door (or doors), the hood, ggage compartment lid or rear indow are not completely closed. ven if you do not respond by ecuring the indicated area, the ystem will start monitoring all other reas, and the indicator lamp flashes ontinuously after 10 seconds. How- ver, the interior motion sensor is not ctivated the indicator lamp goes out when e system is disarmed: no manipula-
on or attempted intrusions have een detected in the period since the ystem was armed
he in.
>T a lu w E s s a c e a
> If th ti b s
The concept The vehicle alarm system responds:
>When a door, the hood or the lug- gage compartment lid are opened
>To movement inside the vehicle (inte- rior motion sensor)
>Variations in the vehicle's tilt angle of the kind that occur during attempts to steal the wheels or tow the vehicle
>To interruption of battery voltage.
The system responds to unauthorized vehicle entry and attempted theft by simultaneously activating the following:
>Sounding an acoustical alarm for 30 seconds
>The hazard warning flashers are acti-
To arm and disarm the alarm system When the vehicle is locked or unlock with the key or the remote control, th alarm system is also simultaneously armed or disarmed.
You can have different acknowl edgment messages set to confi
arming and disarming.<
You can also open the luggage com- partment lid when the system is arme by pressing the button on the remote
vated for approx. five minutes >The high beams flash on and off in
the same rhythm as the hazard warning flashers.
control (refer to page 29). When you close the luggage compartment lid, t luggage compartment is secured aga
36nAlarm system Electric power windows
en and close windows ition key position 1 and 2:
ress the rocker switch until you
f
To op In ign
>Dep
3 9 0 d
e0 5 5
l resistance: window continues moving for as as you maintain pressure on the
tch ss the rocker switch beyond the ssure point: window moves automatically. ss the switch a second time to p the window.
fee The long swi
>Pre pre The Pre sto
> If the indicator lamp flashes for 10 seconds when the system is dis- armed: an attempted entry has been detected in the period since the system was armed.
Following triggering of an alarm, the indicator lamp will flash continuously.
Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. You can do this to prevent an unintentional alarm from being trig- gered (in garages with elevator ramps, for instance), or when the vehicle is transported by trailer or train:
Interior motion sensor In order for the interior motion sensor to function properly, the windows and sliding/tilt sunroof must be completely closed.
Nevertheless, you should deactivate the interior motion sensor (refer to "Avoiding unintentional alarms") if
>children or animals are left in the vehicle
> the windows or the sliding/tilt sunroo are being left open.
Actuate the lock (= arm the system) twice; in other words, press button 2 of the remote control twice in succession (refer to page 29). You may also actuate the locks twice with the key (refer to page 27). The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are deactivated as long as the system is armed.
37n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Electric power windows
ety switch h the safety switch you can prevent rear windows from being opened losed via the switch in the rear pas-
ht tu- ).
ed e
y.
an
Saf Wit the or c
3 9 0 d
e6 9 3
Re pa
ir s
Da ta
In de
x
ger area (by children, for example).
Press the safety switch whenever children are riding in the rear of
vehicle. Careless use of the power dows can lead to injury.<
r e
r
sen
the win
After the ignition has been switched off:
>You can still operate the power win- dows as long as neither of the front doors has been opened. To open a window, press the switch beyond the pressure point.
When leaving the vehicle, always remove the ignition key from the
lock and remember to close the doors to prevent children from operating the power windows and injuring them- selves, etc.<
For convenience operation via the door lock or remote control, refer to page 27 or 29.
Despite this safety feature, be extremely careful to ensure that
the closing path of the window is not obstructed. Otherwise, an object mig not touch the contact strip in some si ations (very thin objects, for instance You can disable this safety feature by pressing the switch beyond the pres- sure point and holding it. Because the power windows are seal at high pressure to prevent wind nois when closed, a powerful motor is required for efficient closing. When closing the windows, always be sure that they are not obstructed in any wa Unsupervised use of these systems c result in serious personal injury.
Safety feature A contact strip is located on the inside upper frame of each of the windows. If pressure is exerted against this contact strip while a window is being raised, the system will respond by stopping the window and then retracting it slightly.
Remove the ignition key to deactivate the electric power windows wheneve you leave the vehicle. Never leave th keys in the vehicle with unsupervised children. Never place anything that could obstruct the driver's vision on o next to the windows.<
38nSliding/tilt sunroof*
matic opening and closing the switch past the pressure briefly: the sunroof travels to the fully-closed or fully-open on.
automatic operations are:
h the sunroof open, press the tch briefly toward "Lift": the sun- f automatically extends to its fully- ed position h the sunroof lifted, press the tch briefly toward "Open": the roof automatically opens all the .
ing the switch again stops the
Auto Press point either positi
Other
>Wit swi roo rais
>Wit swi sun way
Press
y feature sliding/tilt sunroof encounters ance at a point roughly past the e of its travel when it is closing, osing cycle is interrupted and the of will open again slightly.
, -
motio
Safet If the resist middl the cl sunro
To prevent injuries, exercise care when closing the sliding/tilt
sunroof and keep it in your field of vision until it is shut. Before leaving the vehicle, switch off the electric sunroof mechanism by removing the ignition key. Do not leave children unattended in the vehicle with access to vehicle keys. The key can be used to start the engine and to operate vehicle systems such as the power sun- roof, etc. Unsupervised use of these systems can result in serious personal injury.<
For convenience operation via the door
Raising opening closing With the ignition key in position 1 or higher, press the switch or slide it in the desired direction until you feel resis-
3 9 m
d e1
3 8
lock or remote control, refer to page 27 or 29. tance.
When lifting, the headliner retracts sev- eral inches.
The headliner insert can not be closed with the sunroof in its
raised position.<
After the ignition has been switched off you can still operate the sliding/tilt sun roof as long as no front door has been opened.
39n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Sliding/tilt sunroof*
nual operation e event of an electrical malfunction,
can also operate the sliding/tilt roof manually.
Ma In th you sun
3 9 0 d
e3 7 6
Re pa
ir s
Da ta
In de
x
emove the interior lamp, then reach to the exposed opening and press ut the cover se the Allen key from the onboard ol kit (refer to page 124) to turn the
liding/tilt sunroof in the desired irection.
y :
x.
1. R in o
2. U to s d
Despite this safety feature, be extremely careful to ensure that
the closing path of the roof is not obstructed. Remember that the safety mechanism may not be able to detect every kind of potential obstruction (very thin objects, for instance). You can dis- able this safety feature by pressing the switch beyond the pressure point and holding it.<
Sliding/tilt sunroof with glass moonroof insert* The options and control procedures are essentially the same as those previ- ously described for the sliding/tilt sun- roof. In order to open the raised roof,
Interruption in the electrical supply After interruptions in the electrical supply (when the battery is discon-
3 9 m
d e1
3 9
press the control switch towards "Open" and maintain pressure until the roof has reached the desired position.
The headliner insert slides back some- what when you raise the sunroof, and retracts along with the sunroof panel when you slide it back. The insert then remains open, and you can slide it back and forth to adjust it whenever the sun- roof is not fully retracted.
nected, for instance), the sunroof ma only lift. To reinitialize the mechanism
1. Raise the sliding/tilt sunroof fully 2. Press and hold the switch for appro
20 seconds.
40n
adjusting your seat, always rve the following precautions Never try to adjust your seat while operating the vehicle. The seat respond with an unexpected ment, and the ensuing loss of le control could lead to an acci- Never ride with the backrest ed to an extreme horizontal angle rtant for front passengers to
ber), otherwise, there is a risk ou will slide under the safety belt accident, thus negating the pro- n the safety belt provides. t move the seats to the rear when hicle is at an extreme angle (on
Sitting safely Seats
For relaxed and fatigue-free driving you should select a seating position that reflects your personal requirements. Correct seating position combines with safety belts and airbags to enhance occupant safety in the event of an acci- dent. To ensure that the vehicle's safety systems provide you with optimal pro- tection, we request that you direct your careful attention to the following sec- tion.
For additional information on trans- porting children, refer to page 51.
Sitting safely with airbags Always maintain an adequate dis-
For airbag locations and additional information on airbags refer to page 49.
Sitting safely with safety belt Never allow more than one person to wear a single safety belt. Never
allow infants or small children to ride in a passenger's lap. Avoid twisting the belt while routing it firmly across the pelvis and shoulder, wear it as snugly against your body as possible. Do not allow the belt to rest against hard or fragile objects in your pockets. Do not route the belt across your neck, or run it across sharp edges. Avoid wearing bulky clothing and pull on the lap belt
e ramps or steep slopes, for ple). If you do so, the automatic belt height adjustment can be gaged.<
adjustment W M sport seat, refer to page 41 W comfort seat, refer to page 42 d restraints, refer to page 43 W active seat, refer to page 43
tance between yourself and the airbags. Always hold the steering wheel by the rim with the hands at the 9 and 3-o'clock positions to keep any chance of injury to hands or arms to an absolute minimum should the airbag be deployed. Never allow any objects, individuals or animals to obstruct the areas between passengers and airbags. Never use the front airbag's cover as a storage tray or support for objects of any kind. Never allow front passengers to rest their feet or legs on the airbag cover.<
periodically to retension it over your shoulders. In the event of a frontal impact, a loose lap belt could slide over the hips, leading to abdominal injury. In addition, the safety belt's restraint effectiveness is reduced if it is worn loosely. Expectant mothers should always wear their safety belts, taking care to position the lap belt against the lower hips, where it will not exert pres- sure against the abdominal area.<
For information on using the safety belts refer to page 44.
When obse
could move vehic dent. reclin (impo remem that y in an tectio Do no the ve
Seat >BM >BM >Hea >BM
41n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
BMW M sport seat
gh support ss switch: you can adjust the thigh port for maximum personal comfort.
r
Thi Pre sup
3 9 m
d e1
1 5
Re pa
ir s
Da ta
In de
x
lp g
/
ur-
1 Tilt (driver's seat only)
2 Backward/forward adjustment
3 Cushion height
4 Backrest angle
3 9 m
d e0
0 9
Lumbar support You can adjust the backrest's contou for additional support in the curvature of your spine's lumbar region.
3 9 m
d e1
1 4
5 Head restraint height
To adjust the angle of the head restraint manually, tilt to the desired angle.
Please refer to the adjustment instructions on page 40 to reduce
the risk of personal injury.<
The upper hips and spinal column receive supplementary support to he you maintain a relaxed, upright seatin position.
>Press front/rear of switch: increase decrease curvature
>Press the upper/lower end of the switch: increase the upper/lower c vature.
42nBMW comfort seat*
passenger's seat adjusted for d traveling:
just the upper backrest section ts extreme rear position er the backrest slightly to
rease the tilt angle ng the upper backrest section
ard until your shoulders enjoy support.
Make corrections in the forward/ backward adjustment of the seat ure that the safety belt still fits
against your body. Failure to ve this precaution can reduce the nt of protection provided by your
Front relaxe
1. Ad to i
2. Low inc
3. Bri forw firm
to ens firmly obser amou
belt.<
safety
This seat also allows you to make addi- tional adjustments using the power seat system (refer to BMW M sport seat, page 41) for
3 8 0 d
e0 2 4
Shoulder support Press the switch: the support angle of the upper backrest section is adjusted.
5 3 0 d
e2 5 2
1 Lumbar support
2 Shoulder support
Please refer to the adjustment instructions on page 40 to reduce
the risk of personal injury.<
Lumbar support Refer to BMW M sport seat on page 41.
You can use the adjustable upper back rest for supplementary support in the shoulder region. This provides a relaxed seating position and helps relieve stress on the shoulder muscles.
To obtain the optimal shoulder support position, we recommend:
Driver and front passenger:
1. Adjust the upper backrest section to its extreme rear position
2. Adjust for the optimal seating posi- tion as described on page 40
3. Bring the upper backrest section forward until your shoulders enjoy firm support.
43n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Head restraints BMW active seat*
n .
Re pa
ir s
Da ta
In de
x
Head restraints To adjust the angle of the front head restraints: tilt the head restraint.
To adjust the height of the rear head
3 9 m
d e1
3 1
Active changes in the seat's cushion helps to avoid muscle cramps, pain i the spine's lumbar region and fatigue
To activate, press the button.
3 9 m
d e1
2 1
restraints: pull up or push down.
Head restraints reduce the risk of spinal injury in the event of an
accident. Adjust the head restraint so that its center is approximately level with your ears. Leave the center-rear head restraint in the fully-lowered position at all times. Extending it limits its function.<
44nSafety belts
:
Drive with your safety belt on Always fasten your safety belt before starting off. As supplemental restraint devices, the airbags are designed to
3 9 m
d e0
6 9
The shoulder belt anchor automatically adjusts to continue providing an optimum fit when you move the seat forward or back.
The rear belt buckle with the word "CENTER" is intended exclusively
for the passenger sitting in the middle. Vehicles with through-loading system* please refer to the instructions for using the rear center belt found on page 99.<
If the safety belt system has been subjected to the stresses involved
in an accident or otherwise damaged: to ensure that the safety belts continue
enhance the effectiveness of the safety belts, and not to replace them.
To close Make sure you hear the catch engage in the belt buckle.
To open 1. Press the red button in the belt
buckle 2. Hold the end of the belt 3. Guide the belt back into the inertia
reel.
to provide effective protection, always have the entire safety belt mechanism replaced and the belt anchorages inspected at your BMW center. If a child-restraint system was in the vehicle during an accident, consult the manufacturer's instructions regarding replacement.<
45n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Seat, mirror and steering wheel memory
select a stored setting venience function:
he driver's door remains open after nlocking or the ignition key is in osition 1 riefly press memory button 1, 2 r 3, as desired. ovement stops immediately when ne of the seat adjustment or emory buttons is activated during e adjustment process.
ety function:
ith the driver's door closed and the nition key either removed or in osition 0 or 2 aintain pressure on the desired emory button (1, 2 or 3) until the
djustment process is completed.
u should happen to press the MORY button by mistake: press the on a second time; the indicator p goes out.
Do not call up a position from the memory while the vehicle is
ing. There is a risk of accident from xpected movement of the seat or ring wheel.<
n
ng
di-
ut.
To Con
1. T u p
2. B o M o m th
Saf
1. W ig p
2. M m a
If yo ME butt lam
mov une stee
You can store and call up three different seat, exterior mirror and steering wheel positions. The illustration shows the buttons on the driver's door for making these position adjustments.
3 9 0 d
e0 3 2
To store 1. Turn the key to ignition key positio
1 or 2 2. Adjust to the desired positions for
the seat, exterior mirror and steeri wheel
3. Press the MEMORY button: the in cator lamp in the button lights up
4. Press memory button 1, 2 or 3, as desired. The indicator lamp goes o
The setting for the lumbar support is not stored in memory.
46nSeat, mirror and steering wheel memory Seat heating
eat cushion and backrest can be d with the ignition key in on 2. You can select different g modes by repeatedly pressing ttons.
an also switch the higher heating s off directly: the button and hold it slightly r.
The s heate positi heatin the bu
You c mode Press longe
3 9 0 d
e7 2 0
Your BMW center can adjust your vehicle's systems in such a
manner that your personalized settings are automatically called up for the seat, mirror and steering wheel positions when you unlock the vehicle with your personal remote control key.<
Before using the key memory fea- ture to unlock the vehicle always
ensure that no objects are stored in the footwell behind the driver's seat. If you fail to do so, persons or objects could be injured or damaged if the seat should move backward.<
Passenger-side exterior mirror tilt function (automatic curb monitor)
3 9 0 d
e7 2 0
1 Move the mirror selector switch (arrow) to the "driver's mirror" posi- tion
2 When the gearshift lever or the selector lever is placed in "Reverse," the passenger-side mirror tilts down- ward to help the driver monitor the area directly adjacent to the vehicle during parking (curbs, etc.).
You can deactivate this automatic fea- ture by setting the mirror selector switch to the "passenger-side" posi- tion.
47n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Steering wheel
nd i- ry)
y
is g
Re pa
ir s
Da ta
In de
x
Adjustments The steering wheel can be moved in any of four directions. Adjust by moving the control lever in the desired direc-
3 9 m
d e1
3 4
Automatic steering wheel adjustment In order to make it easier to get into a out of the vehicle, the steering wheel automatically moves into the top pos tion and returns to the driving (memo position.
This automatic feature is controlled b the position of the ignition key and by the driver's door.
Your BMW center can adjust your vehicle's systems in such a
manner that your personalized setting automatically called up for the steerin wheel position when you unlock the
tion.
Do not adjust the steering wheel while the vehicle is moving. There
is a risk of accident from unexpected movement.<
To store the steering wheel setting, refer to "Seat, mirror and steering wheel memory" on page 45.
vehicle with your personal key.<
48nMirrors
ior and exterior mirrors, atic dimming feature
mirrors automatically respond re from following vehicles by dim-
Inter autom These to gla
3 9 m
d e0
8 2
through an infinitely variable . The mirrors automatically revert ir clear, undimmed setting when- ou select reverse.
terior rearview mirror's dimming on is regulated by two photocells; integrated in the mirror's lens ), while the other is located at an
position on the rear of the mirror.
sure that the mirror continues rate efficiently, ensure that the djacent to the photocells remains and unobstructed. Refrain from ing stickers or other objects to hield immediately behind the ew mirror.
ming range to the ever y
The in functi one is (arrow offset
To en to ope area a clear attach winds rearvi
Exterior mirrors 1 Switch for 4-way adjustment
2 Selector switch for changing
3 9 0 u s7
3 3
Convex mirror The passenger-side mirror fea- tures a convex lens. When esti-
mating the distance between yourself and other traffic, bear in mind that the objects reflected in the mirror are closer than they appear.<
Your BMW center can adjust your vehicle's systems in such a
manner that your personalized setting is automatically called up for the mirror position when you unlock the vehicle with your personal remote control.<
Self-defrosting mirrors
To adjust manually The mirrors can also be adjusted by hand: Press the edge of the lens.
To store mirror settings, refer to "Seat, mirror and steering wheel memory" on page 45.
Both mirrors are automatically defrosted with the ignition key in position 2.
49n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Airbags
tem components include the uphol- ed surfaces on the steering wheel, rument panel, the trim panels on the t and rear doors and the roof braces ell as the sides of the headliner
ve the doors. er attempt to remove or dismantle steering wheel. nsure compliance with official ty regulations, always entrust dis- al of airbag generators to your BMW ter. Attempts to carry out service cedures undertaken by anyone r than specially-trained profes- als can result in system failure or esired airbag deployment, both of ch can lead to personal injury. If the
- y r W if
g
in
e-
Sys ster inst fron as w abo Nev the To e safe pos cen pro othe sion und whi
Re pa
ir s
Da ta
In de
x
ags deploy in response to an acci- t, always remember to avoid all tact with system components, as are hot and can cause burns in the
iod immediately following deploy- t.<
All vehicle occupants should always sit upright and be properly
rained (infants and small children in ropriate child-restraint systems; er children and adults using the ty belts). Never let an occupant's d rest near or on a side airbag: the ting airbag could cause a serious or
e - ny e of er-
e g,
ith r
airb den con they per men
rest app larg safe hea infla
1 Front airbags on the driver and passenger sides
2 Head protection airbags on driver and passenger side (front and rear*)
3 9 m
d e0
8 4
The side airbags in the rear pas senger area* of your vehicle ma
already have been deactivated, eithe at the time of manufacture or by a BM center. You may have them activated you desire to do so. Please contact your BMW center for additional infor- mation.<
For information on the correct seatin position, refer to page 40.
The airbags will not be triggered the event of a minor accident, a
vehicle rollover or a collision from the rear.<
Never apply stickers or adhesiv
side (front and rear*)
Protective effect The front airbags help to protect the driver and passenger in the event of a head-on collision where the protection provided by the safety belt alone would not be adequate. The head protection airbags and side airbags help provide protection in the event of a collision from the side. Each of the side airbags is designed to help support the occu- pant's upper body.
backed objects of any kind to th airbag covers. Never attempt to reup holster the covers or modify them in a way. If the airbags deploy in respons to an accident, if you note any signs system malfunction, or if you wish to have any parts of the airbag passeng restraint system deactivated, always contact your BMW center, to whom w strongly urge you to entrust all testin repair and dismantling operations. Never attempt to modify or tamper w either the system's electrical wiring o any of its individual components.
50nAirbags
the right way a child should sit in d restraint when rear side airbags ) are provided.
This is a chil (arrow
3 8 0 d
e6 3 7
fatal injury. Please note that the word "Airbag" imprinted on the door trim panel indicates the airbag's location. Accident research shows that the safest place for children in an automo- bile is in the rear seat. However, a child sitting in the rear seat and not properly restrained may place his or her head on or near the side airbag, if installed. For example, a child even though belted may fall asleep with his or her head against the side airbag. It may be diffi- cult for a driver to ensure that children in the rear seat will remain properly positioned at all times and do not place their heads on or near the side airbag.
Even when all these guidelines are fol- lowed, there is still a small residual risk of injuries to the face, hands and arms occurring in isolated instances. The ignition and inflation noise may provoke a mild temporary hearing loss in extremely sensitive individuals.
Airbag warning information is also pro- vided on the sun visors.
Therefore, we recommend that the rear-seat side airbags, if provided, be deactivated if you plan to transport chil- dren in the rear seat. The rear-seat side airbags may already have been deactivated, either at the time of manufacture or by a BMW center. Labels in the rear door opening should indicate the status of your rear- seat side airbags. If you are uncertain of their status, or wish to have the airbags activated or deactivated, please con- tact your BMW center.<
51n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Airbags Transporting children
mercially-available child-restraint tems are designed to be secured a lap belt or with the lap belt por- of a combination lap/shoulder belt. roperly or inadequately installed raint systems can increase the risk jury to children. Always read and w the instructions that come with system.
he g
-
y
y up
it
Com sys with tion Imp rest of in follo the
Re pa
ir s
Da ta
In de
x
-
e
This is the right way a larger child should sit wearing the safety belt when rear side airbags (arrow) are provided.
3 8 0 d
e6 3 8
Indicator lamp The indicator lamp indicates t operational status of the airba system from ignition key posi
tion 1.
System operational:
>The indicator lamp comes on briefl then goes out.
System malfunction:
>The indicator lamp fails to come on >The indicator lamp comes on briefl
before going out and then lighting again.
Please respond to any malfunctions in the system by immediately having
52nTransporting children safely
Before installing any child- restraint device or child seat, e read the following: install a rearward-facing child- int system in the front passenger f this vehicle. ehicle is equipped with an airbag
emental restraint system for the assenger. Because the backrest
y rearward-facing child-restraint (of the kind designed for infants
1 year and 20 Ibs./9 kg) would be the airbag's deployment range, hould never mount such a device front passenger seat, since the t of the airbag against the child int's backrest could lead to s or fatal injuries.
necessary for a child (not an ) to ride in the front seat, certain utions should be taken. First, the passenger seat as far away
pleas Never restra seat o Your v suppl front p on an system under within you s in the impac restra seriou If it is infant preca move
Child-restraint system with tether strap If you use a child-restraint system with a tether strap, three additional tether
3 8 0 u s1
2 3
Each seating position is fitted with a head restraint. Lift the head restraint and pass the tether strap between the head restraint and the seat back. It is
3 9 4 au
0 0 3
anchorage points have been provided refer to the arrows in the illustration. Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corre- sponding anchorage point to secure the child-restraint system, as shown in the following illustration.
recommended to readjust the head restraint into the lowest possible posi- tion.
Adjust the tether strap according to the child restraint manufacturer's instruc- tions.
53n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Transporting children safely
CH child-restraint anchorage nts* CH: Lower Anchor and Tethers for ldren.
p the rear center lap belt into the kle with the word CENTER and then the belt away from the area where child restraint will be mounted.
Vehicles with through-loading
ild-
LAT poi LAT CHi
Sna buc pull the
3 9 0 d
e7 8 6
Da ta
In de
x
system*: use the small lock mech- m to connect the two sections of center belt, refer to page 99.<
st -
-
.
anis the
This important precaution is intended to maximize the distance between the airbag and the child. Older children should be tightly secured with a safety belt, after they have outgrown a booster seat that is appropriate for their age, height and weight. Younger children should be secured in an appropriate forward-facing child- restraint system that has first been properly secured with a safety belt. Never install a rearward-facing child- restraint system in the front passenger seat. We strongly urge you to carefully read and comply with the instructions for installation and use provided by the child restraint's manufacturer when-
Child-restraint installation All of the rear belt retractors and the front passenger's safety belt can be locked for mounting and securing ch
3 6 5 u s1
4 6
ever you use such a device. Be sure that all occupants (of all ages) remain properly and securely restrained at all times.<
All rear seating positions in your vehicle meet the recommendations of SAE J1819, an industry-recommended prac- tice for securing child-restraint systems in motor vehicles.
restraint systems. A label with the appropriate instructions is located in the immediate vicinity of the buckle latch of each safety belt.
Lock the safety belt Extract the entire length of the belt from the belt retractor. Allow the reel to retract the belt somewhat and engag the buckle, then tighten the belt again the child-restraint system. The retrac tion mechanism is now locked.
Unlock the safety belt Release the buckle, remove the child restraint device and allow the belt retractor to reel the belt completely in
54nTransporting children safely
-safety locks the key in the slot of a rear door nd turn it outward:
oor can now be opened from the e only.
.
Child Insert lock a
The d outsid
3 9 0 d
e6 9 8
The rear outer seating positions are provided with anchors for a LATCH child-restraint system. The illustrations show the right rear seat as an example.
3 9 4 u s7
5 0
Canadian models only: The anchorage points for the LATCH child-restraint system are marked with buttons.
3 9 4 u s7
4 9
The outer anchorage points for the LATCH child-restraint system are marked with small flags.
To attach the LATCH child- restraint system, your BMW
center will provide an installation guide The guide, although not necessary for installation of a LATCH child-restraint system, will facilitate the installation and also help protect the vehicle's seating surfaces. Carefully read and comply with the safety precautions of the manufacturer.<
55n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Vehicle Memory, Key Memory
mples for Key Memory:
ocks the vehicle when you start off utomatically adjusts the driver's eat, the exterior mirrors and the teering wheel position to your per- onal programmed settings when you nlock the vehicle he automatic climate control ssumes your preset comfort settings hen you unlock the vehicle.
You will see this symbol through- out the Owner's Manual. It is to
ind you at appropriate places of the ings that are available to you.<
he s a
n -
ith le
t
e
Exa
>L >A
s s s u
>T a w
rem sett
Da ta
In de
x
How the system functions No doubt you have reflected at one time or another on how great it would be if you could permanently configure
4 6 3 d
e0 2 9
When your vehicle is unlocked with t remote control, the vehicle recognize the individual user by means of a dat exchange with the key, and makes adjustments accordingly.
In order for you to distinguish betwee different keys, colored decals are sup plied together with the keys.
What the system can do Your BMW center can provide you w details on the capabilities of the Vehic Memory and Key Memory systems. A few examples follow below:
Examples for Vehicle Memory:
>Various signals as acknowledgmen
The available configuration data fall into two categories, according to whether their primary orientation is the vehicle ("Vehicle Memory") or the individual ("Key Memory"). Provided that each person has a separate remote-control key, you can have your BMW center enter two personal adjustments for two different individuals into the system.
when locking or unlocking your vehicle
>Activates/deactivates the "Follow m home" function.
56n
re starting age the parking brake
ve the gearshift lever to the neu- position ress the clutch pedal.
Do not allow the engine to run in enclosed spaces. The exhaust contain carbon monoxide, an ss and colorless, but highly toxic reathing the exhaust gases poses
treme health risk, and can lead to sciousness and death. t leave the vehicle unattended he engine running. An unattended le with a running engine repre-
Steering/Ignition lock Starting the engine
0 Steering locked
1 Steering unlocked
2 Ignition switched on
3 9 0 d
e0 1 0
Steering unlocked Turning the steering wheel slightly to the right or left often makes it easier to turn the key from 0 to 1. Individual electrical accessories are ready for operation.
Starting engine Depress the clutch when starting the engine. A lockout prevents the engine from starting with the clutch engaged.
a potential safety hazard.<
Steering locked The key can be inserted or removed in this position only.
An acoustic warning is sounded when you fail to remove the ignition key after opening the driver's door.
After removing the key, turn the steering wheel slightly to the left or right until the lock engages.
Befo >Eng >Mo
tral >Dep
gases odorle gas. B an ex uncon Do no with t vehic
57n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Starting the engine Switching off the engine
n the ignition key to position 1 or 0.
Do not remove the ignition key while the vehicle is still moving. If
do so, the steering will lock, making possible to steer the vehicle.
en you leave the vehicle, always ove the ignition key and engage the ring lock. ays engage the parking brake n parking on hills and inclined sur- s, as even first gear or reverse may provide adequate resistance to ng.<
lly e- t
he
o
g, es n
-
Tur
you it im Wh rem stee Alw whe face not rolli
Re pa
ir s
Da ta
In de
x
re t s,
-
Starting engine Do not press the accelerator pedal while starting the engine.
While it is important not to release the key prematurely, you should
also avoid allowing the starter to operate continuously for more than 20 seconds at a time. Release the igni- tion key immediately when the engine starts.<
Do not warm up the engine by allowing it to run with the vehicle parked. Instead, you should drive away immedi- ately while taking care to avoid high engine speeds until the engine warms
The engine's idle speed is automatica regulated by the computerized engin management system. A brief period a high idle is normal just after starting; t idle speed should gradually return to normal as the engine warms. Should the engine fail to revert to its normal idle speed after warming, a problem may exist: please refer the problem t your BMW center.
To prevent the battery from dischargin always switch off any electrical devic not in use, as well as the ignition whe the vehicle is not being driven.
Extended starting attempts, characterized by excessively fre
to its normal operating temperature.
If the engine does not start on the first attempt (the engine is very hot or cold, for instance):
>Press the accelerator pedal halfway down while engaging the starter.
Cold starts at extremely low tempera- tures of roughly +57 (156) or below and at altitudes of over 3,300 ft (1,000 m):
>Allow the starter to turn somewhat longer (approx. 10 seconds) during your initial starting attempt.
quent or long periods with the starter engaged, can lead to catalyst damage.<
When driving, standing at idle, and parking the vehicle, take ca
to avoid contact between the exhaus system and flammable materials (gras hay, leaves, etc.). Such contact could lead to a fire, resulting in serious per sonal injury and property damage.<
58nParking brake Manual transmission
shifting gears, always depress utch pedal all the way down, then the gearshift lever until it engages ely in the desired gear.
When the cl move secur
3 9 m
d e0
1 7
ill also need to depress the clutch starting the engine, as an auto- lockout prevents the starter from ting when the clutch is engaged.
the vehicle lighting is switched e shift pattern is illuminated on arshift lever.
When shifting gears in the 5th/ 6th-gear plane, be sure to press arshift lever to the right in order vent inadvertent selection of a n the 3rd/4th-gear plane.<
You w when matic opera
When on, th the ge
the ge to pre gear i
The parking brake is designed primarily to prevent the vehicle from rolling when it is parked. It operates on the rear wheels.
3 9 0 d
e7 1 4
If, in exceptional circumstances, it should be necessary to engage
the parking brake while the vehicle is in motion, do not pull it with excessive pressure. Keep your thumb pressed against the release button while care- fully pulling the lever up to apply mod- erate pressure. Excessive pressure can lead to over- braking and loss of traction (fishtailing) at the rear axle. The brake lamps do not come on when the parking brake is applied. Always engage the parking brake when parking on hills and inclined surfaces, as even first gear or reverse may not provide
To engage The lever engages automatically when it is pulled up, and the "PARK BRAKE" (in Canada "P") indicator lamp comes on in the instrument cluster in ignition key position 2. Refer to page 17.
To release Pull up slightly on the lever, press the button and lower the lever.
adequate resistance to rolling.<
You can help prevent corrosion and maintain balanced braking by periodi- cally pulling up the parking brake lever gently while coasting to a stop at a traffic light. Always check traffic condi- tions first to avoid posing a hazard to yourself or other road users.
59n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Manual transmission Turn signal/Headlamp flasher
or
Re pa
ir s
Da ta
In de
x
he
Reverse Select only when the vehicle is com- pletely stopped. Press the gearshift lever to the left to overcome the resis- tance.
As you do this, the backup lamps will turn on automatically when the ignition key is in position 2.
Do not hold the vehicle in place on slopes by slipping or "riding" the
clutch. Use the parking brake instead. Riding the clutch causes the clutch assembly to wear out prematurely.<
1 High beam (blue indicator lamp)
2 Headlamp flasher (blue indicator lamp)
3 Turn signal indicator (green indicat 3 9 m
d e1
3 5
lamp accompanied by periodic clicking sound from the relay)
To signal briefly Press the lever up to but not beyond the pressure point. It then returns to t center position when released.
If the indicator lamp and the clicking from the relay are both
faster than normal, one of the turn signal indicators has failed.<
60nWasher/Wiper system/Rain sensor
Turn the rain sensor off in auto- matic car washes. Failure to do so result in damage caused by ired wiper activation.<
al wipe the vehicle is stationary, the s automatically revert to intermit- ipe (not on vehicles with rain r).
wipe the vehicle is stationary, the s operate at normal speed (not on les with rain sensor).
ning windshield ystem sprays washer fluid against indshield and activates the wipers rief period.
sive cleaning setting 5. In addition, an intensive-
could undes
Norm When wiper tent w senso
Fast When wiper vehic
Clea The s the w for a b
Inten As in
washer fluid is first sprayed on indshield.
action the w
0 Wipers retracted
1 Intermittent mode or rain sensor* 2 Normal wipe
3 9 m
d e1
3 6
Intermittent mode or rain sensor* Intermittent mode:
You can set the wipe interval to four stages with rotary dial 7. In addition, the wipe interval varies automatically depending on road speed.
Rain sensor:
The rain sensor is positioned on the windshield, directly ahead of the inte- rior rearview mirror.
To activate the rain sensor: Move the lever to position 1 with the ignition key in position 1 or higher. The wipers travel once across the wind-
3 Fast wipe
4 Brief wipe
5 Cleaning windshield
6 Intensive cleaning
7 Rotary dial for control of the wipe interval in the intermittent mode or the sensitivity of the rain sensor
shield, regardless of the weather conditions.
You can leave the lever permanently in position 1. Whenever the ignition key is in position 1 or higher, all you then need to do to activate the rain sensor is briefly turn the rotary dial 7.
To adjust the sensitivity of the rain sensor: Turn rotary dial 7.
To deactivate the rain sensor: Put lever in position 0.
61n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Washer/Wiper system Cruise control
activate the system
m ignition key position 2: ss the button and the indicator lamp he instrument cluster (refer to e 18) will come on. You can now the cruise control.
Do not use cruise control on twisting roads, when high traffic
sity prevents driving at a constant ed, or when the road surface is slick w, rain, ice) or loose (rocks or el, sand).<
deactivate the system
-
er
To
Fro Pre on t pag use
den spe (sno grav
To
Re pa
ir s
Da ta
In de
x
ss button as often as needed until indicator lamp in the instrument ter goes out.
ise control is also deactivated when ignition key is in position 0.
speed stored in memory is deleted.
Pre the clus
Cru the
The
Cleaning headlamps When the headlamps are on, they are also cleaned automatically every fifth time you activate "Cleaning windshield" 5 or "Intensive cleaning" 6.
Do not use the washers if there is any danger that the fluid will
freeze on the windshield, as your vision could be obscured. You can reduce this danger by adding a windshield washer antifreeze. Refer to page 115. Do not activate the washer if the reservoir is empty, as the washer pump could be damaged.<
Windshield washer jets
You can store and automatically main tain any desired vehicle speed above approx. 20 mph (30 km/h).
The cruise control is available whenev the engine is running and the system has been activated.
The windshield washer jets are warmed automatically when the ignition key is in position 2.
62nCruise control
terrupt the cruise control
the system is activated, press the . The indicator lamp stays on.
an use the cruise control again ever you want by calling up the that was stored last.
ition, cruise control is interrupted atically:
en the brakes are applied en you depress the clutch pedal u exceed or fall below the pro-
mmed speed for an extended iod (by depressing the acceler- r, for example).
To in
When button You c when speed
In add autom
>Wh >Wh > If yo
gra per ato
call the stored setting
button: ehicle accelerates to and main- the last speed stored.
To re
Press The v tains
To maintain and store speed or to accelerate
Press button (+) briefly: The system maintains and stores the current vehicle speed. Every time you tap the button, the speed increases by approx. 0.6 mph (1 km/h).
Press and hold button (+): The vehicle accelerates without pres- sure on the accelerator pedal. When you release the button, the system stores and maintains the current speed.
If, on a downhill gradient, the
To decelerate
Press button () briefly: If you are already driving with active cruise control, the speed is decreased by approx. 0.6 mph (1 km/h) every time you tap the button.
Press and hold button (): With the cruise control active, the system automatically reduces the throttle opening to slow the vehicle. When you release the button, the system maintains and stores the cur- rent speed.
engine braking effect is not suffi- cient, the controlled speed can be exceeded. Speed can drop on uphill grades if the engine output is insuffi- cient.<
63n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
arning outside temperature drops to x. +37.5 7 (+3 6), a signal is ed as a warning and the display s for a brief period.
The ice warning does not alter the fact that surface ice can form at ratures above +37.5 7 (+3 6),
dges or shaded road surfaces, for ce.<
Odometer, outside temperature display
1 Odometer
2 Trip odometer
3 Outside temperature display
3 9 m
u s0
0 5
Outside temperature display The outside temperature appears in the display in ignition key position 1 and higher.
Re pa
ir s
Da ta
In de
x
hange the units of measure- ) by
and holding the button with the ignition key in 1 the ignition key to 0.
Odometer You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster (arrow).
The range of available displays varies according to your individual vehicle's equipment.
Trip odometer To reset the trip odometer to zero, press the button (arrow) with the igni- tion key in position 1 or higher.
You can c ment (7/6
1. pressing (arrow) position
2. turning
Ice w If the appro sound flashe
tempe on bri instan
64nTachometer Engine oil temperature Fuel gauge
you switch on the ignition, the tor lamp comes on briefly to con- at the system is operational.
When indica firm th
3 9 m
u s0
2 5
indicator lamp comes on and on, there are approx. 2.5 gal ers) of fuel still in the tank.
el tank capacity, refer to 143.
tilt of the vehicle varies (when you iving in mountainous areas, for ple), the needle may fluctuate ly.
Please refuel early, since driving to the last drop of fuel can result in ge to the engine and/or catalytic rter.<
If the stays (10 lit
For fu page
If the are dr exam slight
dama conve
The orange pre-warning zone appears depending on the engine temperature. As the engine temperature increases, more and more of the sectors of this
3 9 m
u s0
2 3
The normal operating temperature range is between +176 7 (+80 6) and +248 7 (+120 6). Do not exceed the maximum temperature of +302 7
3 9 m
u s0
2 4
pre-warning zone disappear.
Avoid engine speeds in the pre-warning zone if possible.
Do not operate the engine with the needle in the red overspeed zone of the gauge.
To protect the engine, the engine-man- agement system interrupts the fuel supply when you approach this sector.
(+150 6).
65n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
ir s
Coolant temperature gauge Service Interval Display
en lamps number of illuminated lamps reases as the time for your next ntenance visit approaches.
low lamp field appears together with
Gre The dec mai
Yel This
3 8 0 u s0
0 8
Re pa
Da ta
In de
x
SERVICE or INSPECTION.
ntenance is due. Please contact r BMW center for an appointment.
lamp maintenance deadline has been sed.
OIL
Mai you
Red The pas
Blue The engine is still cold. Drive at mod- erate engine and vehicle speeds.
3 9 m
d e0
2 6
Red Accompanied by the warning, "COOLANT TEMPERATURE" in the Check Control: the engine is over- heated. Shut off the engine immediately and allow it to cool down.
To check coolant level, refer to page 118.
Between the blue and red zones Normal operating range. The needle may rise as far as the edge of the red sector in normal operation.
66n
ECK BRAKE FLUID" level has dropped nearly to the imum. Top up the brake fluid at earliest opportunity. Refer to e 118. Have the source of the ke fluid loss diagnosed and cor- ted at your BMW center E DEFECT" uce vehicle speed immediately stop the vehicle. Avoid hard ke applications. Do not oversteer. er to page 83 IT"* is displayed if the programmed ed limit has been exceeded. er to page 73.
Check Control
Text messages are used to alert the driver to system malfunctions with the ignition key in position 2 and higher. The alert is accompanied by a gong.
3 9 m
u s0
2 7
Priority 1
These defects are immediately indi- cated by a gong and a flashing warning symbol 1. Simultaneous defects will be
consecutively. These status remain in the display until the e corrected. They cannot be pressing the CHECK
SE PARKINGBRAKE" NT TEMPERATURE" lant is overheated. Stop the and switch off the engine tely. Refer to page 117 NGINE OILPRESS" ressure is too low. Stop the
and switch off the engine tely. Refer to pages 16, 115
1 Status symbol for messages
2 Display
3 CHECK button
Messages warning of system malfunc- tions are assigned one of two priority levels.
displayed messages defects ar deleted by button 3:
> "RELEA > "COOLA
The coo vehicle immedia
> "STOP!E The oil p vehicle immedia
> "CH The min the pag bra rec
> "TIR Red and bra Ref
> "LIM This spe Ref
67n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Check Control
HECK BRAKE LININGS" ave the brake pads checked at your MW center. Refer to page 108 HECK COOLANT LEVEL"
he coolant level is too low; top off t the next opportunity. Refer to age 118 HECK FILLER CAP"
heck to see whether the fuel filler ap has been properly closed. Refer page 21 NGINE FAILSAFE PROG" dicates a malfunction in the elec- onic engine-management system, hich then reverts to an emergency efault program allowing continued peration at reduced power and
he its
r
ir-
> "C H B
> "C T a p
> "C C c to
> "E In tr w d o
Re pa
ir s
Da ta
In de
x
wer engine speeds. lease have the system inspected by our BMW center
UTSIDE TEMPERATURE 24 7 5.0 6)" his temperature display is only an xample. The current temperature is isplayed at outside temperatures of 7.5 7 (+3 6) and below. Refer also page 63.
lo P y
> "O ( T e d 3 to
Priority 2
These displays appear for 20 seconds with the ignition key in position 2. The warning symbols remain after the mes- sage disappears. The messages can be recalled again with CHECK button 3.
> "TRUNKLID OPEN" This message appears only when you initially begin a trip
> "DOOR OPEN" This message appears after a defined road speed has been exceeded
> "FASTEN SEAT BELTS"* In addition to this message, an indi- cator lamp with the safety belt icon appears and an acoustic signal is
> "TIRE PRESSURE SET" The Flat Tire Monitor has adopted t tires' current inflation pressures as reference levels. Refer to page 82
> "TIRECONTROL INACTIVE" Transient malfunctions and system errors in the Flat Tire Monitor. Refe to page 83
> "CHECK BRAKE LIGHTS" A lamp has failed or the electrical c cuit has a fault. Refer to pages 126 and 132 or consult a BMW center
> "CHECK LOWBEAM LIGHTS" "CHECK SIDE LIGHTS" "CHECK REAR LIGHTS" "CHECK FRONT FOGLAMPS" "CHECK LICPLATE LIGHT"
sounded > "WASHER FLUID LOW"
Too low; top up fluid at the next opportunity. Refer to page 115
> "CHECK ENGINE OIL LEV" The oil level is at the absolute min- imum, so add engine oil as soon as possible. Refer to page 115. Until then, do not drive more than approx. 30 miles (50 km)
"CHECK HIGHBEAM LIGHT" "CHECK BACK UP LIGHTS" Defective bulb or circuit. Refer to page 124 and following and page 132 or consult a BMW center
68nCheck Control
Displays after completion of a trip All of the malfunctions registered during the trip appear consecutively when the key is turned to position 0.
The following displays will appear when appropriate:
> "LIGHTS ON" This display appears when you open the driver's door after parking the vehicle
> "KEY IN IGNITION LOCK" > "CHECK ENGINE OIL LEV"
Add the engine oil at the earliest opportunity (next stop to refuel). Refer to page 115.
To check the Check Control Press the CHECK button 3 with the ignition key in position 2: CHECK CONTROL OK appears in the display.
There are no faults in the monitored systems.
Computer You can find descriptions of the com- puter starting on page 73 and in the "Owner's Manual for Onboard Com- puter."
You can have the Check Control
Status messages remain available for a period of approx. three minutes after the display goes out and the key is removed from the ignition. Press the CHECK button 3 to display these mes- sages. If there were multiple messages, press the CHECK button repeatedly to view them all in sequence.
and computer messages dis- played in a different language.<
69n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Multi-Information Display (MID)
play for the entry and query but- s. Depending on the operating de, the functions and alternatives ch can be selected at the buttons displayed here
ry and check buttons for operating various onboard systems
-
6 Dis ton mo whi are
7 Ent the
Da ta
In de
x
Central Display The MID serves as the central display and control for the following onboard systems:
>Digital clock (e.g. time display, date) >Audio systems (radio, cassette, CD) >Computer (e.g. fuel consumption,
cruising range) >Cellular phone (e.g. dialing).
You will find explanations and notes for operating the digital clock and the com- puter on the following pages. Please refer to the Owner's Manual for oper- ating the audio systems, the cellular phone and the onboard computer.
1 Function button for audio systems
2 Function button for the cellular phone*
3 9 0 u s7
0 5
The system rejects all implausible data entries.
All stored data will be lost if the power supply is interrupted. Time of day, switch-on times for parked-car ventila- tion, distance and cruise control speed limit may have to be reset once the power supply has been re-estab- lished.<
3 Indicator lamp for parked-car ventila tion system > remains on if switch-on time is
active > flashes while operating
4 Function button for the digital clock and computer
5 Indicator display for the various onboard systems
70nDigital clock
ging the date
the left side of the button.
.
the right side of the button: ots and the DATE display will
er the setting:
Chan
Press
Press
Press The d flash.
To alt
on left or right, or hold the button .
re the entry:
the right side of the button.
lock takes leap years into account erefore does not have to be reset
ally.
Press down
To sto
Press
The c and th manu
Only make entries when the vehicle is standing still to avoid
endangering yourself or other road users.<
Calling up time or date
Press the left side of the button.
Display shows:
You can have the time of day displayed in 12 or 24 hours.
Changing the time
Press the left side of the button.
Press the right side of the button: The dots flash in the display.
To alter the setting:
Press on the left or right, or hold the button down.
To change the display:
Press the left side of the button.
If the 12-hour time display is in use, AM or PM appears after the time.
To store the entry:
Press the right side of the button.
71n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Digital clock
tart the stopwatch:
ss the right side of the button.
ake an intermediate time reading:
ss.
ss: stopwatch display can be seen nting up; the stopwatch continues
To s
Pre
To t
Pre
Pre The cou
Re pa
ir s
Da ta
In de
x
un.
alt the stopwatch:
ss the right side of the button.
The stopwatch is halted when the ignition key is turned back to 0,
starts to run again when the ignition is turned to 1.<
to r
To h
Pre
but key
Reminder signal You can program an hourly reminder signal (Memo), that will, for example, remind you of news broadcasts.
Press the left side of the button.
Press: MEMO OFF appears in the display for entry and query buttons, and the tone symbol will appear in the upper right of the display.
A signal is then heard 15 seconds
Stopwatch
Press the left side of the button.
Press.
Display shows:
before each hour.
72nDigital clock
tivate/deactivate the time:
twice.
ing the parked-car ventilation m on and off directly
The parked-car ventilation system is available exclusively in ignition osition 1.<
the left side of the button.
To ac
Press
Turn syste
key p
Press
.
Press
or
press
Setting activation times for parked-car ventilation system You can enter two different activation times. After 30 minutes, the ventilation will switch off automatically.
Please observe the instructions for operating the parked-car venti-
lation system on page 92.<
Press the left side of the button.
To enter the time:
Press on left or right, or hold down.
To confirm the entry:
Press the right side of the button.
The activated time is marked with an asterisk.
The switch-on times remain memorized
Press on the left or right.
Display shows:
Press the right side of the button: Display flashes, e.g. TIMER 1.
until new entries are made.
You can change switch-on times that have already been memorized by set- ting a new time using the procedure described above.
When the switch-on time is active, the LED comes on in the MID. During actua operation of the ventilation, the LED flashes. The LED goes out when the system is switched off.
73n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer
lay shows:
er the limit by pressing the function ons.
orrect an entry:
ss the left side of the button and eat the entry.
tore the entry:
ss the right side of the button.
he
n- ph
Disp
Ent butt
To c
Pre rep
To s
Pre
Re pa
ir s
Da ta
In de
x
Only make entries when the vehicle is standing still to avoid
endangering yourself or other road users.<
Computer calculations begin at the start of the journey. Display information can also be accessed by remote control, refer to page 77.
Speed limit Speed limit entry:
You can enter the road speed here at which you wish to hear and see a reminder signal: a signal will sound, t word LIMIT will flash and the stored speed will briefly flash in the Check Control display on the instrument cluster.
The speed limit reminder is only repeated if the vehicle has in the mea time been driven at least approx. 3 m (5 km/h) slower.
Press the right side of the button.
Press.
Press the right side of the button.
74nComputer
rrect an entry:
the left side of the button and t the entry.
re the entry:
the right side of the button.
all stored value:
the right side of the button.
To co
Press repea
To sto
Press
To rec
Press
the left side of the button.
Press
To adopt the current speed as the speed limit:
Press the right side of the button.
Press.
Press twice at right.
Deactivating the speed limit:
Distance to destination The remaining distance to the destina- tion will be displayed on the screen. This is of course only possible if you entered the entire distance before starting the journey.
Enter:
Press the right side of the button.
Press the left side of the button.
Press the right side of the button.
Press.
The LIMIT display goes out, but the stored limit is not lost and can be re- activated by pressing the LIMIT button.
Press the right side of the button.
Display shows:
You can enter the distance by pressing the function buttons.
75n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer
l consumption can have the average fuel sumption displayed for two different ances, for example a complete ney and part of the journey.
tart the calculation, select the func- with the engine running:
ss the right side of the button.
ss on left or right: average fuel consumption will be cated in the display.
d k
to ,
Fue You con dist jour
To s tion
Pre
Pre The indi
Re pa
ir s
Da ta
In de
x
estart the fuel consumption calcula- :
ss on the left or right.
ss the right side of the button.
ld To r tion
Pre
Pre
Estimated time of arrival When you have entered the distance from your destination, you can obtain an estimated time of arrival display which is continuously updated by the computer as your average rate of progress varies.
Press the right side of the button.
Press the right side of the button: The estimated time of arrival is dis- played.
Cruising range The distance which the vehicle shoul cover on the remaining fuel in the tan is displayed.
Press the right side of the button.
Press: The display shows the estimated cruising range.
When there is only enough fuel drive less than 30 miles (50 km)
you should refuel, as otherwise the engine or the catalytic converter cou be damaged.<
The computer will only register fuel amounts over 1.8 gal (6 liters).
76nComputer
re the entry:
the right side of the button. he ignition key to position 0.
ivate the code:
you are asked to enter the code on key in position 1 or 2):
er the code at the function but- s
the right side of the button.
To sto
Press Turn t
Deact
When (igniti
>Ent ton
Press
the code has been entered cor- and confirmed with the SET , the time display appears.
After rectly button
Speed You can call up a display of the vehicle's average speed.
To start the calculation, select the func- tion with the engine running:
Press the right side of the button.
Press: The display shows the average speed.
To recalculate the speed:
Extended immobilizer function You can define a code that will prevent the engine from being started unless the code is entered.
If you do not have access to the code, the emergency deactivation procedure will have to be carried out, refer to the next page.
To enter and activating the code:
Press the right side of the button.
Press the right side of the button.
Press the left side of the button.
Display shows:
Enter the code at the function buttons.
To correct an entry:
Press the left side of the button and repeat the entry.
77n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer
isplay all the available information, ss:
he button on the lever until the dis- lay shows PROG 1 he SET button.
btain individual items of informa- , press the button in briefly as often ecessary.
- .
To d pre
>T p
>T
To o tion as n
Re pa
ir s
Da ta
In de
x
1
ch
ro- ay.
:
After three incorrect code entries, or three attempts to start the engine without a code entry, the alarm will sound for 30 seconds on vehicles equipped with an alarm system.
Setting the alarm in an emergency:
If you have forgotten the code, proceed as follows:
1. Disconnect the battery, wait about 2 minutes, then reconnect it. Note that on vehicles with an alarm system, the alarm will sound
2. Turn the ignition key to position 1: The time display will count down for the next ten minutes
3. After ten minutes, start the engine.
Remote control You can press the button in the turn signal indicator lever to retrieve infor mation from the computer for display
3 9 m
d e1
1 8
If the code becomes available again in the meantime, it can be
entered during the waiting period after pressing the CODE button.<
To do this, press:
>The button on the lever until PROG shows on the display
>The MID buttons in the order in whi you wish the information to be dis- played. Each time an entry is stored, the p gram number appears on the displ
To terminate the selection procedure
Press the right side of the button.
78n
stic signals istance from an obstacle is indi- in front with a higher intermittent at the rear with a lower intermit- ne. As the distance between
e and object decreases, the inter- etween the tones become shorter. tinuous tone indicates the pres- of an object less than 1 ft (30 cm)
arning signal is canceled after x. three seconds if you are g parallel to a wall.
e is a malfunction of the system: dicator lamp flashes and a brief
Park Distance Control (PDC)*
The concept PDC provides extra safety and conve- nience during parking maneuvers by providing an acoustic signal to indicate the distance to the nearest object. To do this, four ultrasonic sensors in the front and rear bumpers each measure the distance to the nearest object. The monitoring range of the front sensors and two rear sensors at the ends of the rear bumper extends outward roughly 2 ft (60 cm), while the rear bumper's two centrally located sensors detect objects at distances of up to approx. 5 ft (1.50 m).
Manual activation Press the button, the indicator lamp lights up.
3 9 m
d e1
1 6
uous signal tone is heard
n you activate PDC with the ton n you select reverse for the first
e after switching on the ignition malfunction occurs while the PDC tem is active.
h the system off and have the of the malfunction corrected by MW center.
Automatic function The system is activated automatically about one second after you engage reverse with the ignition key in position 2.
When you subsequently drive a dis- tance of more than approx. 160 ft (50 meters) or exceed a speed of approx. 20 mph (30 km/h), the system switches off and the indicator lamp goes out. Switch the system on again as required.
Manual deactivation Press the button again.
Acou The d cated tone, tent to vehicl vals b A con ence away.
The w appro movin
If ther The in contin
>whe but
>whe tim
> if a sys
Switc cause your B
79n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
pa ir
s
Park Distance Control (PDC)*
Re Da
ta In
de x
PDC does not remove the driver's personal responsibility for evalu-
ating the distance between the vehicle and any obstacles. Even with the sen- sors, there is a blind spot in which objects cannot be detected. This applies especially in those cases where the system approaches the physical limits of ultrasonic measurement, as occurs with e. g. tow bars and trailer couplings, and in the vicinity of thin or wedge-shaped objects. Certain sources of sound, such as a loud radio, could drown out the PDC signal tone.<
Keep the sensors clean and free of ice or snow in order to ensure
that they will continue to operate effec- tively. Do not apply high-pressure spray to the sensors for a prolonged period of time. Maintain an adequate distance of more than 4 in (10 cm).<
80nDynamic Stability Control (DSC)
activate the system the button again; the indicator goes out.
The laws of physics cannot be repealed, even with DSC. An priate driving style always ns the responsibility of the driver. t use the extra safety margins fur-
d by these systems as an excuse ing unnecessary risks.<
mic Brake Control (DBC) is an integral component of the ystem.
ystem responds to sudden, high- ity applications of force to the pedal by automatically braking hicle with maximum boost to
ve the shortest possible braking ces during "panic stops." This
To re Press lamp
appro remai Do no nishe for tak
Dyna DBC DSC s
The s intens brake the ve achie distan
t reduce the pressure exerted st the brake pedal until the g maneuver has been completed.
is deactivated when you release dal.
s Do no again brakin DBC the pe
DSC maintains vehicle stability, even in critical driving situations.
The system optimizes vehicle stability during acceleration and when starting from a full stop, as well as enhancing traction. In addition, the system recog- nizes unstable vehicle conditions (understeering or oversteering, for example) and holds the vehicle on a sure course by intervening via the engine and by braking at the individual wheels.
The system starts up automatically each time you start the engine.
Indicator lamp
To deactivate the system Press the button, the indicator lamp lights up and remains on continuously.
3 9 m
d e1
2 4
The indicator lamp in the instru- ment cluster goes out shortly after you switch on the ignition.
Refer to page 17.
Indicator lamp flashes: The system is active and governs drive and braking force.
If the indicator lamp fails to go out after the engine is started, or if it comes on during normal driving and stays on: There is a system malfunction or the system was deactivated with the button. You can continue to drive the vehicle normally, but without DSC. Please con- sult your BMW center for repairs.
When DSC is deactivated, you are driving with conventional power transfer.
In the following exceptional circum- stances, it may be effective to deacti- vate the DSC for a short period:
>When rocking the vehicle or starting off in deep snow or on loose surface
>When driving with snow chains.
81n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
M Dynamic Driving Control
Da ta
In de
x
The system guarantees that whenever desired, the system will switch the Ser- votronic and the accelerator pedal response from the sporty-comfortable
3 9 m
d e1
2 5
Performance Recognition Press the button with the ignition key in position 2: the indicator lamp comes on.
Deactivating Performance Recognition: Press the button again; the indicator lamp goes out.
The coordinated performance-comfort mode is activated automatically each time you start the engine.
mode to a pure performance mode. This means that steering response becomes more performance-oriented and the response of the accelerator pedal is much more spontaneous (Per- formance Recognition).
82nFlat Tire Monitor
at this process after altering the flation pressure, changing the tire, ating the wheels.
t carry out a new initialization of stem, if you correct the inflation ures to the already specified tire ures.
Repe tire in or rot
Do no the sy press press
The concept The Flat Tire Monitor keeps track of the inflation pressures in your tires as you drive. The system provides an alert whenever the inflation pressure drops significantly in one of the tires.
To initialize the Flat Tire Monitor system with the correct tire inflation pressures, start by checking the inflation pressures in all four tires, comparing them with the figures specified in the tire inflation pressure table (page 23). Then correct the tire inflation pressures as neces- sary. Now you can activate the system.
The Check Control (refer to page 66)
Activating the system 1. Turn the ignition key to position 2
(do not start the engine) 2. Press the button and maintain pres-
3 9 m
d e1
1 9
will inform you if the tire inflation pres- sure of one the tires has dropped signif- icantly.
sure until the message "SET TIRE PRESSURE" appears in the Check Control (several seconds)
3. As you drive, the Flat Tire Monitor automatically enters the system ini- tialization mode in which it stores the current pressures as its reference figures. The initialization process lasts for ten minutes or somewhat longer. Once it has been completed the Tire Pressure Monitor is able to detect and warn of flat tires.
83n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Flat Tire Monitor
tem malfunctions message "TIRECONTROL INAC- " appears in the Check Control
remains on until the problem is cor- ed.
same message is displayed if there system malfunction.
se refer the problem to your BMW ter.
e
g r-
l ar- ire
Sys The TIVE and rect
The is a
Plea cen
Re pa
ir s
Da ta
In de
x
Flat tire In the event of a flat tire, the message, "TIRE DEFECT" will appear in the Check Control. This visual alert will be accompanied by a gong.
If this occurs, reduce vehicle speed immediately and stop the vehicle. Avoid hard braking and overcorrecting at the steering wheel. Correct the flat tire using the M Mobility system (refer to page 128).
The Flat Tire Monitor cannot alert you to severe and sudden tire
damage caused by external factors. Another factor which the Flat Tire Mon-
Check the tire inflation pressure on a regular basis and correct if
necessary. Refer to page 22. Do not carry out any kind of system activation when using snow chains. Under these kinds of conditions, fals warnings and unidentified losses in pressure are possible. In certain circumstances, when drivin on snow-covered or slippery road su faces, there may be a delay in identi- fying any loss in inflation pressure. Performance-oriented driving (slip at the drive wheels, high levels of latera acceleration) can also delay the appe ance of status messages in the Flat T Monitor's display panel.<
itor does not recognize is the balanced and very gradual pressure loss that takes place in all tires over an extended period of time.<
84n
matic headlight control* When the switch is set to this position the system automati- cally activates and cancels the
eams in response to changes in nt light ( in tunnels, at dusk, etc.) ll as rain and snow.
The vehicle's external lights remain on constantly when you on the front fog lamps after the
ights have come on automati-
Automatic headlight control cannot serve as a substitute for
Parking lamps/Low beams
Parking lamps (side marker lamps)
With the switch in this position, the front, rear and side vehicle
3 9 0 d
e7 3 2
"Follow me home": When you activate the headlamp
flasher after parking the vehicle and switching off the lights, the low beams will come on for a brief period. You may also have this function deactivated if you wish.<
"LIGHTS ON" warning When the driver's door is opened with the ignition key in position 0 a message will appear in the Check Control if the lights are on, refer to page 68.
Daytime driving lamps* The headlamps are automatically
iver's judgement in determining the vehicle lights should be ed on. For example, the sensors t able to detect fog. To avoid risks, you should respond to kinds of low-visibility situations itching the headlights on manu-
You can have the sensitivity of your vehicle's automatic head- ontrol adjusted.<
lighting is switched on. For lighting on one side for parking as an additional feature, refer to page 85.
Low beams When you switch off the ignition and the low beams are still on, only the parking lamps (side
marker lamps) remain on.
switched on for daylight driving at ignition key position 2.
Auto
low b ambie as we
switch headl cally.<
the dr when switch are no safety these
light c
85n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Instrument lighting High beams/Standing lamps Fog lamps
t fog lamps The green indicator lamp in the instrument cluster lights up to
Fron
3 9 0 u s7
3 5
Re pa
ir s
Da ta
In de
x
indicate that the front fog lamps .
high beams are switched on, the mps go out.
s comply with the legal regula- governing use of fog lamps.
If the automatic headlight control is on, the low beams will come on atically whenever you activate g lamps.<
are on
If the fog la
Alway tions
autom the fo
Turn the rotary dial to adjust the illumi- nation intensity.
3 9 0 d
e7 3 3
1 High beams (blue indicator lamp)
2 Headlamp flasher (blue indicator lamp)
3 9 m
d e1
3 5
3 Standing lamps
Standing lamps, left or right As an additional feature, you can illuminate your vehicle on either side for parking, if you wish to do so:
With the ignition key in position 0, push the lever in the appropriate direction. The lever engages in the turn signal indicator position.
86nInterior lamps Reading lamps
The interior lamps operate automati- cally.
Switching the interior lamps on
3 9 m
d e0
8 7
Reading lamps are located in the front near the interior lamp or in the rear of the vehicle. They can be switched on and off with the button (arrow) adjacent
3 9 4 d
e3 0 1
and off manually Press the button (arrow) briefly.
If you want the interior lamps to remain off all the time, press and hold the button for approx. 3 seconds.
To revert to normal operation, press the button briefly.
to each lamp.
In order to prevent battery dis- charge, all of the lamps in the
vehicle are switched off automatically approx. 15 minutes after the ignition key is turned to position 0.<
87n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic climate control
Re pa
ir s
Da ta
In de
x
ard the wind- ows
body area 91
4 Rear footwell ventilation
5 Airflow for the upper body area in the rear seats 91
6 Automatic air distribution 89
dividual air distribution 89
emperature control left-hand ide 89
isplay for temperature and ir supply 89
1 Airflow directed tow shield and side wind
2 Airflow for the upper
3 Footwell ventilation
3 9 m
u s0
0 6
7 In
8 T s
9 D a
88nAutomatic climate control
right-hand
remove
13 Automatic recirculated-air control (AUC) 90
14 Rear window defroster 90
15 Air supply 89
aximum cooling 90 residual heat mode 90
r grill for interior temperature nsor please keep clear and obstructed
16 M or
17 Ai se un
10 Temperature control side 89
11 Defrost windows and condensation 89
12 Air conditioning 90
3 9 m
u s0
0 6
89n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic climate control
supply In the AUTO program, the airflow is controlled auto-
ically. AUTO will appear in display 9, r to the overview on page 87. "+" and "" to vary the airflow. r setting is displayed with bars and automatic air supply is switched off. automatic air distribution setting is ntained. You can reactivate the matic air supply by pressing the O button.
en you press "" during operation at lowest blower speed, all displays canceled: the blower, heating and onditioning are switched off. The
of e
ef- - - - he
Air
mat refe Use You the The mai auto AUT
Wh the are air c
Re pa
ir s
Da ta
In de
x
ide air supply is deactivated. By ssing the desired button on the matic climate control (except MAX on 16), you can switch the system k on.
defrost windows and remove densation
This program quickly removes ice and conden-
on from the windshield and the side dows.
he
-
a al n- rt he
outs pre auto butt bac
To con
sati win
Tips for pleasant driving Use the automatic system (switch on with AUTO button 6). Select an interior temperature that you find comfortable.
The following description will lead you through additional individual settings.
Your BMW center can program the settings of your vehicle in such
a manner that, when you unlock the vehicle with your individualized key, your own personalized setting for the automatic climate control is initiated.<
Automatic air distribution The AUTO program
Individual air distribution You also have the option individually configuring th air distribution pattern to suit your own personal pr erences. While the AUTO
program is then deactivated, the auto matic airflow control remains in opera tion. The system directs air to the win dows , the upper body and into the footwells . You can reactivate t automatic air distribution mode by selecting the AUTO button.
Temperature You can make individual
assumes the adjustment of the air distribution and the air supply for you and in addition to that adapts the temperature to external influences (summer, winter) to meet preferences you can specify.
temperature settings on t driver's side or the front
passenger side. The figures in the dis play provide a general indication of interior temperature. We recommend setting of 72 7 (22 6) for a congeni interior climate, even when the air co ditioner is in operation. When you sta the vehicle, the system ensures that t selected temperature is achieved as quickly as possible. It then maintains this temperature, regardless of the season.
90nAutomatic climate control
window defroster When the rear window defroster is activated, the
tor lamp comes on. The rear w defroster switches off automat-
ual heating mode The heat which is stored in the engine is utilized for
g the interior when the engine een switched off (while waiting at oad crossing, for instance). In n key position 1, you can alter the gs of the automatic climate con- ith the ignition key in posi-tion 0,
l
.
Rear
indica windo ically.
Resid
heatin has b a railr ignitio settin trol. W
stem automatically directs heated the windshield, side windows and ells.
This function is available for oper- ation when the outside tempera- below approx. 59 7 (15 6),
he engine warm from recent oper- and an adequate charge in the y. The LED on the button will light en all conditions have been
the sy air to footw
ture is with t ation batter up wh met.<
Air conditioning The air is cooled and dehumidified and
depending on the temperature setting warmed again when the air conditioning is switched on. Depending on the weather, the wind- shield may fog over briefly when the engine is started. You can reduce con- densation forming on the windows by switching on the air conditioning.
Condensation forms in the air condition system during opera-
tion, which then exits under the vehicle. Traces of condensed water of this kind
Automatic recirculated-air contro You can respond to unpleasant external odors
by temporarily excluding the flow of outside air. The system then recircu- lates the air currently within the vehicle By repeated actuations of the button, you can select one of three different operation modes.
> Indicator lamps off: outside airflow operational
>Left-hand indicator lamp on AUC mode: the system recognizes pollut- ants in the outside air and blocks the flow of air when necessary. The system then recirculates the air cur-
are thus normal.<
Maximum cooling At outside temperatures above roughly 41 7 (5 6)
this program furnishes maximum cooling whenever the engine is running.
The temperature displays 9 jump to 60 7 (16 6), the system reverts to operating in the recirculated-air mode and maximum airflow emerges from the vent outlets only. That is why you need to keep these open if you select this program.
rently within the vehicle. Depending on the air quality, the automatic system then switches back and forth between outside air supply and recirculation of the air within the vehicle
>Right indicator lamp on recircu- lated-air mode: the flow of external air into the vehicle is permanently blocked. The system then recirculates the air currently within the vehicle.
If the windows should fog over in the recirculated-air mode, switch
it off and increase the air supply as required.<
91n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic climate control
rofilter, activated-charcoal r
microfilter removes dust and pollen the incoming air. The activated-
rcoal filter provides additional pro- ion by filtering gaseous pollutants the outside air. Your BMW center
laces this combined filter as a stan- d part of your scheduled mainte- ce. A substantial reduction in airflow cates that the filter must be laced before scheduled mainte- ce.
Mic filte The from cha tect from rep dar nan indi rep nan
Re pa
ir s
Da ta
In de
x
e
Draft-free ventilation You can adjust the vent outlets for the upper body area for optimal personal comfort:
3 9 0 d
e6 8 5
Rear passenger area ventilation 1 Rotary dial for infinitely variable
opening and closing of vent outlets
2 Rotary levers for airflow direction 3 9 0 d
e6 8 6
1 Rotary dials for infinitely-variable opening and closing the vent outlets
2 Rotary levers for airflow direction
3 Rotary dial allows you to control the temperature of the airflow as desired: >Turn toward blue colder >Turn toward red warmer.
3 The rotary dial operates in the sam way as the front dial to adjust the temperature of the emerging air.
92nRoller sun blind* Parked-car ventilation
ir emerges via the vent outlets upper body. Therefore, the vent
s must be open for the system to te.
an adjust the airflow volume and r distribution when the ignition key osition 1.
The a for the outlet opera
You c the ai is in p
r
-
To actuate, press the button briefly with ignition key in position 1.
Roller sun blinds for rear side
3 9 m
d e1
2 2
It will ventilate the interior, reducing the temperature through the use of the automatic climate control blowers, whenever the vehicle is not in opera- tion.
The parked-car ventilation system is operated via the Multi-Information Dis- play (MID) refer to page 72 or the onboard computer. Refer to the "Owner's Manual for Onboard Com- puter."
You may preselect two different activa- tion times. The ventilation will remain activated for 30 minutes. You can also turn it on and off directly. Since the system uses a substantial amount of
windows* Use the strap to pull out the blinds, then hook them in the provided attachment.
electrical current, you should refrain from activating it twice in succession without allowing the battery to be recharged in normal operation between use.
The parked-car ventilation is available for timer-controlled operation wheneve outside temperatures exceed 60 7 (16 6), and can also be activated man ually at any temperature. It operates only when the vehicle is stationary.
93n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
king for the conversion code er to determine whether the orig- and-held transmitter is equipped conversion code system, you ither refer to the instructions for iginal hand-held transmitter or am a channel key as described in ft-hand column on page 94 under ramming."
ing that, press and hold the pro- ed channel key on the BMW Uni-
l Transmitter. If the indicator lamp BMW Universal Transmitter s rapidly for two seconds and tays on continuously, the original held transmitter is equipped with
BMW Universal Transmitter*
The concept The BMW Universal Transmitter replaces up to 3 hand-held transmitters, e.g. for garage-door openers, alarm systems or a door-locking system. The BMW Universal Transmitter recognizes and "learns" the signal transmitted from each of the original hand-held transmit- ters.
The signal of an original hand-held transmitter can be programmed to one of the three channel keys. Following that, each of the devices can be actu- ated with the appropriately-pro- grammed channel key. The indicator lamp flashes to confirm transmission of
with the safety instructions for the orig- inal hand-held transmitter also.<
To Canadian residents During programming, your hand-
held transmitter may automatically stop transmitting after two seconds. This may not be long enough to program the BMW Universal Transmitter. If you are programming from one of these hand- held transmitters, the BMW Universal Transmitter's light may begin to flash in a series of double-blinks. If this occurs, continue to hold the key on the BMW Universal Transmitter while you reacti- vate your hand-held transmitter. You
Re pa
ir s
Da ta
In de
x
version code system. If the con- n code system is available, pro- the channel keys as described on 94 in the right-hand column under ramming a hand-held transmitter onversion code."
If you have additional questions, please consult your BMW center l 1-800-355-3515.<
the signal.
Before you sell your vehicle, the pro- gram data in the channel keys should be deleted. Refer to page 95 for the description of this process.
To prevent potential injuries or damage: during the programming
operation and before every remote trig- gering of a programmed device using the BMW Universal Transmitter, be sure that there are no persons, animals or objects within the range of movement of the respective device. Read and comply
may have to repeat this function several times while programming.<
Before programming, read the "User's information" section on
page 95.<
The original hand-held transmitter If this symbol is depicted on the packaging or in the user's instructions for the original
hand-held transmitter, it may be assumed that this original hand-held transmitter is compatible with the BMW Universal Transmitter.
Chec In ord inal h with a may e the or progr the le "Prog
Follow gramm versa on the flashe then s hand- a con versio gram page "Prog with c
or cal
94nBMW Universal Transmitter*
ramming a hand-held mitter with conversion code Read and comply with the safety precautions on page 93.<
lt the operating instructions when amming the BMW Universal mitter for a particular device. and comply with the following amming instructions to use the Universal Transmitter with a con- n code system:
A second person simplifies pro- gramming of the BMW Universal mitter.<
Prog trans
Consu progr Trans Read progr BMW versio
Trans
Programming 1 Channel keys
2 Indicator lamp
3 9 0 d
e6 4 0
3. Hold the original hand-held trans- mitter to receiver 3, a maximum of 2 in (5 cm) away
4. Press the transmitting key on the 3 8 0 d
e7 1 2
3 Receiver for programming
Read and comply with the safety precautions on page 93.<
1. Ignition key in position 2 2. For initial operation: press and hold
the two outer keys 1 until the indi- cator lamp 2 flashes. Release the keys. The three channel keys are cleared
original hand-held transmitter (arrow 2) and the desired channel key on the BMW Universal Trans- mitter (arrow 1) at the same time. Release both keys as soon as the indicator lamp flashes rapidly
5. To program other original hand-held transmitters, repeat steps 3 and 4.
The selected channel key is now pro- grammed with the signal of the original hand-held transmitter.
95n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
BMW Universal Transmitter*
's information t use this BMW Universal Trans- with any garage-door opener that safety "stop" and "reverse" fea- as required by federal safety stan- , (this includes any garage- door r model manufactured before st, 1982).
evice complies with Part 15 of the ules. Operation is subject to the
ing two conditions: (1) This device ot cause harmful interference, ) This device must accept any rence received, including inter- e that may cause undesired tion.
User Do no mitter lacks tures dards opene April 1
This d FCC R follow may n and (2 interfe ferenc opera
Da ta
In de
x
1. Program the BMW Universal Trans- mitter as described on the previous page under "Programming"
2. Press and hold the programming key on the receiver of the device for about two seconds or until the pro- gramming lamp on the device comes on
3. Press the desired channel key on the BMW Universal Transmitter three times.
If you have additional questions, please consult your BMW center
or call 1-800-355-3515.<
Deleting the channel keys Read and comply with the safety precautions on page 93.<
Individual channel keys cannot be deleted. However, the three channel keys can be deleted together in the fol- lowing manner:
>Press and hold the two outside channel keys on the BMW Universal Transmitter until the indicator lamp flashes, then release the keys.
All channel keys are deleted.
96nGlove compartment Storage compartments
an open and close the cover for nter console's storage compart- by pushing on the slanted front rrow). If your vehicle is equipped
You c the ce ment part (a
3 9 0 d
e7 3 9
cassette holder*, open each cas- compartment by pressing the button.
ge compartment on the center le between the front seats: to reach into the recess at the front ull upward. If a cellular phone has installed, this compartment is ied by the phone.
ill find additional storage com- ents in all of the doors as well as backrests of the front seats*.
with a sette small
Stora conso open, and p been occup
You w partm in the
To open Pull the handle and the lamp comes on.
To close
3 9 0 d
e7 3 8
To lock Use one of the master keys to lock the vehicle. A master key is also required for unlocking.
If you turn over only your door and ignition key for valet parking, for
example (refer to page 26), access to the glove compartment is not pos- sible.<
Rechargeable flashlight* Located on the left-hand side of the glove compartment. Features integral overload-protection, so it can be left in its holder continu-
Fold the cover up.
To prevent injury in the event of an accident, close the glove com-
partment immediately after use.<
ously.
To avoid completely discharging and possibly damaging the lamp,
always ensure that the flashlight is switched off before inserting it in the socket.<
97n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cellular phone* Beverage holder* Ashtray, front*
empty ss the edge of the lid (arrow): you now pull the ashtray upward for oval.
- To Pre can rem
3 9 0 d
e7 4 2
Re pa
ir s
Da ta
In de
x
vehicles equipped with a non- ker's package, the insert is oved in the same way.
On smo rem
Hands-free system* For vehicles with a telephone prepara- tion*, the trim cover for the hands-free speaker is located in the headliner in
3 9 m
d e0
9 0
Two holders for canned drinks have been provided in the front center con sole (illustration).
Press to open; fold back inward to
3 9 m
d e1
4 0
the area the interior lamp.
For further information on the cellular phone: refer to the Supplementary Owner's Manual.
close.
98nCigarette lighter* Ashtray, rear*
pty the edge of the cover (arrow): you ow pull the ashtray upward for al.
To em Press can n remov
3 9 0 d
e7 4 4
Press the cover panel for access (arrow), then push down the lighter.
Remove as soon as the lighter jumps
3 9 m
d e1
4 1
Cigarette lighter socket It is suitable for attaching power sup- plies for flashlights, car vacuum cleaners and other appliances up to a rating of approx. 200 watts at 12 volts. Avoid damaging the socket due to inserting plugs of different shapes or sizes.
back out.
Hold or touch the hot cigarette lighter by the knob only. Holding
or touching it in other areas could result in burns. The cigarette lighter remains opera- tional when the ignition key has been removed. For this reason, children should never be left in the vehicle unat- tended.<
99n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
h a master key you can lock each krest in the rear seat.
also prevents access to the lug- e compartment from the interior of
Through-loading system*
Fold the rear backrests down Reach into the recess and pull forward (arrow 1).
When you close the backrest, be sure
3 9 4 d
e7 4 5
The central belt has an additional small buckle.
> If you connect the two belt sections, you can use the central belt as any
3 9 4 d
e7 4 6
Re pa
ir s
Da ta
In de
x
vehicle if you turn over only your r and ignition key 3 (refer to e 26). This is convenient for valet king, for instance.
that the catch engages securely. The red slide (arrow 2) must retract completely.
normal 3-point belt > It is easier to fold the rear-seat back-
rest up and down if you disconnect the belt (arrow).
Wit bac
This gag
3 9 4 d
e7 4 7
the doo pag par
100nSki bag*
lling the center armrest the armrest into position from , then apply pressure until you t snap into position.
Be sure that the seat covers are not damaged by the side pins.<
Insta Guide above hear i
The ski bag allows the safe and clean transport of up to four pairs of standard skis or up to two snowboards.
The length of the ski bag and the addi- tional space provided in the luggage compartment make it possible to carry skis with a length of up to 6.8 ft (2.10 meters). Because of the tapered shape of the bag, the ski bag can only accommodate two pairs of skis with a length of 6.8 ft (2.10 meters).
Removing the center armrest (Not for vehicles with the through- loading system, refer to page 102).
3 9 4 d
e7 4 8
1. Fold the center armrest completely outward
2. Loosen the trim from the upper Velcro fastener and place it on the armrest
3. Grasp the front of the armrest with one hand, then use your other hand to reach down behind the armrest and pull up sharply (arrow).
101n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Ski bag*
uring the load Secure the bag's contents by tightening down the retaining
p at the buckle.<
ch ce he
Sec
stra
5 3 0 d
e2 8 4
Re pa
ir s
Da ta
In de
x
se be sure that the skis are clean re loading them into the bag. Be ful to avoid damage from sharp es.
ve
d .<
Plea befo care edg
Loading 1. Press the release button (arrow 1):
the cover panel in the luggage com- partment is unlocked
3 9 4 d
e7 4 9
4. Use the magnetic retainers to atta the cover panel to the upper surfa (metal surface below rear tray) of t luggage compartment.
3 9 4 d
e7 5 0
2. Press the detent levers (arrows 2) inward and fold the cover to the front
3. Extend the ski bag between the front seats. The zipper provides conve- nient access to stored items. It may be opened to allow the ski bag to dry
To store the ski bag, perform the abo steps in reverse sequence.
An unsecured ski bag could lea to loss of vehicle control and in
case of an accident to personal injury
102nSki bag* Cargo loading
ring the load ure smaller, light pieces with the age net or use retaining straps*
er to page 34)
Secu >Sec
lugg (ref
3 9 m
d e0
3 7
large, heavy pieces, see your W center for load-securing ices*. The lashing eyes provided he corners of the luggage com- tment serve for mounting these -securing devices ply with the information
losed with the load-securing ices.
-
>For BM dev at t par load
>Com enc dev
With through-loading system 1. Fold the center armrest outward.
Loosen the trim from the upper Velcro fastener and place it on the
3 9 4 d
e7 5 1
Stowing cargo When transporting cargo in your BMW:
>Load heavy cargo as far forward as
3 9 m
d e0
3 6
armrest 2. Press button 1 downward and swing
the cover forward 3. Press knob 2: the cover in the lug-
gage compartment is unlocked.
possible directly behind the back- rests or the luggage compartment partition and as low as possible
>Cover sharp edges and corners >Do not pile objects higher than the
top edge of the backrest > If you are transporting very heavy
loads when the rear seat is not occu pied, secure the outer safety belts in the opposite buckles.
103n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cargo loading Roof-mounted luggage rack*
hould therefore always remember exceed the approved roof load ity, the approved gross vehicle t or the axle weights when g the rack. These weights are
under "Technical Data", 142.
sure that the load is not too bulky, ttempt to distribute it evenly. s load the heaviest pieces first (on ttom). Be sure that adequate nce is maintained for raising the /tilt sunroof.
Secure the roof luggage correctly and securely to prevent it from
You s not to capac weigh loadin listed page
Make and a Alway the bo cleara sliding
Re pa
ir s
Da ta
In de
x
g or being lost during driving er to following traffic).<
smoothly and avoid sudden eration and braking. Do not corner h speeds.
shiftin (dang
Drive accel at hig
Always position and secure the load correctly. If you do not, it can
endanger the passengers during braking or evasive maneuvers. Never exceed either the approved gross vehicle weight or the approved loads for either of the axles (refer to page 142), as overloading the vehicle beyond the legally approved levels can severely compromise its operating safety. Do not carry hard or heavy objects unsecured in the passenger compart- ment. If you do so, they may be pro- jected through the air during braking and evasive maneuvers, thus endan-
A special roof-rack system is available as an optional extra for your BMW. Please observe the precautions included with the installation instruc-
3 9 4 d
e7 5 7
gering vehicle occupants.< tions.
Anchorages Access to the anchorages: To fold up the cover (arrow), please use the tool provided with the roof-rack system.
Loading and driving notes Roof-mounted luggage racks raise the center of gravity of the vehicle when they are loaded. For this reason, they have a major effect on the vehicle's handling and steering response.
104n
105n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Mainte-
106n
e system ximately 300 miles (500 km) must
e before the brake pads and achieve the optimal pad-surface ear patterns required for trouble- peration and long service life later
ak-in the separate parking brake , apply the parking brake lightly
coasting to a standstill (at a traffic l, for instance), provided that conditions allow you to do so. To corrosion, repeat this procedure ime to time.
The brake lamps do not come on
Break-in procedures
To ensure that your vehicle provides maximum economy throughout a long service life, we request that you observe the following.
Your BMW M5 is a masterpiece of superlative technology. To ensure
that you derive maximum satisfaction from its extensive array of advanced features while simultaneously creating the basis for many years of driving plea- sure, we urge you to observe the fol- lowing precautions during the initial period of operation.<
Engine and differential
Tires Owing to technical factors associated with their manufacture, tires do not achieve their full traction potential until an initial break-in period has elapsed. Thus drive with extra care during the initial 200 miles (300 km).
Comply with all official speed limits.
When the vehicle is operated on wet or slushy roads, a wedge of
water may from between the tire and the road surface. This phenomenon is referred to as aquaplaning, or hydro- planing, and can lead to partial or com- plete loss of traction, vehicle control
when the parking brake is applied. m for the brake system servo unit
ur BMW is available only when the e is running. When you move the le with the engine shut off when g, for instance substantially r levels of pedal force will be ed to brake the vehicle.<
h lutch will also begin to function ally after about 300 miles m). Engage the gears carefully the break-in period.
Up to 1,200 miles (2,000 km): Drive at varying engine speeds and road speeds, but do not exceed 5,500 rpm or 105 mph (170 km/h) during this period.
Comply with all official speed limits.
Do not depress the accelerator pedal to the full-throttle position.
Following the Break-in inspection at 1,200 miles (2,000 km), you can gradu- ally increase engine or road speeds.
You should also comply with these break-in procedures if the engine or dif- ferential is replaced later in the course of the vehicle service life.
and braking effectiveness. Reduce your speed on wet roads.<
Brak Appro elaps rotors and w free o on.
To bre drums when signa traffic avoid from t
Vacuu on yo engin vehic towin highe requir
Clutc The c optim (500 k during
107n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Driving notes Antilock Brake System
concept Antilock Brake System (ABS) keeps wheels from locking during braking, eby enhancing active driving safety.
h ABS, the shortest possible braking ances are achieved under most ditions (on straight-aways and in es, on asphalt, ice, wet road sur- s, etc.).
king with ABS u are in a situation that requires
braking, you will exploit the full ben- of the ABS system if you apply imum pedal pressure ("panic stop").
ation at the brake pedal combined
n
ct
e, ng rs,
The The the ther
Wit dist con curv face
Bra If yo full efits max
Puls
Re pa
ir s
Da ta
In de
x
sounds from the hydraulic circuits cates to the driver that ABS is in its ve mode.
with indi acti
Brakes: Do not rest your foot on the brake
pedal while driving. Even light but con- sistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure. Hydroplaning: When driving on wet or slushy roads, reduce vehicle speed. If you do not, a wedge of water may form between the tires and the road surface. This phe- nomenon is referred to as aquaplaning, or hydroplaning, and can lead to partial or complete loss of traction, vehicle control and braking effectiveness. Driving through water: When there is water on the roads, do
Rear parcel tray: Do not place heavy or hard objects o the rear parcel tray. If you do so, they could pose a danger to vehicle occu- pants during a braking or evasive maneuver. Clothes hooks: When suspending clothing from the hooks, ensure that they will not obstru the driver's vision. Do not hang any heavy objects on the hooks, otherwis passengers could be injured e.g. duri any hard braking or evasive maneuve or during an accident.<
not drive in it if it is deeper than 1 ft (30 cm). If the water is at that depth, drive only at walking speed, otherwise the vehicle can sustain damage to the engine, the electrical systems and the transmission.
108nBrake system
descending steep hills and ded grades, downshift to a gear ill allow you to continue safely nly a minimal amount of braking. nimizing the loads placed on the system, this strategy helps e that optimal brake system nse will remain available at all .
Do not coast with the clutch depressed or with the transmis- r gearshift lever in Neutral. Do not with the engine shut off. The e provides no braking effect when utch is depressed and there is no
-
When exten that w with o By mi brake ensur respo times
sion o coast engin the cl
r-assist for braking or steering the engine is not running. allow floor mats, carpets or any objects to protrude into the area d the accelerator, clutch and pedals and obstruct their move- <
e pads For your own safety: use only brake pads that BMW has ved for your particular vehicle l. BMW cannot evaluate non- ved brake pads to determine if re suited for use, and therefore t ensure the operating safety of hicle if they are installed.<
powe when Never other aroun brake ment.
Brak
appro mode appro they a canno the ve
Brake fluid level If the brake fluid level is too low and brake pedal travel has become notice- ably longer, there may be a defect in one of the two brake system's hydraulic circuits.
Proceed to the nearest BMW center. Higher brake application
pressure may be necessary under these conditions, and the vehicle may exhibit a slight tendency to pull to one side when the brakes are applied. Braking distances may also be longer. Please remember to adapt your driving style accordingly.<
Disc brakes Limited vehicle use, extended periods with the vehicle parked or in storage, and operating conditions in which braking is restricted to gentle, low- pressure applications will all increase the tendency for corrosion to form on the rotors; this is often accompanied by a simultaneous accumulation of con tamination on the brake pads. The pads must exert a certain minimal level of pressure against the rotors for the disc brakes' inherent self-cleaning effect to remain effective; the pressure available under the above conditions may not provide adequate cleansing.
If the brake rotors are corroded, they will tend to respond to braking with a pulsating effect that even extended brake applications will fail to cure.
When driving in heavy rain and on wet roads it is a good idea to apply light pressure to the brake pedal every few miles. Monitor traffic conditions to ensure that this maneuver does not pose a hazard to you or to other road users. The heat generated in this pro- cess helps dry the pads and rotors to ensure that your brake system will respond with undiminished efficiency when you need it.
109n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
mm) these indicators, signal that tires have reached the legally per- sible wear limit.
Do not drive on a deflated (flat) tire. A flat tire greatly impairs steering
braking response, and can lead to plete loss of control over the
icle. id overloading the vehicle so that permitted load on the tires is not eeded. Overloading leads to over- ting and causes damage inside the . The ultimate result can assume the of a sudden air loss. sual vibrations encountered during
mal vehicle operation can indicate a
Tire inflation pressure Tire condition
Information for your safety The factory-approved radial tires are matched to the vehicle and have been selected to provide optimum safety and driving comfort on your vehicle.
It is not merely the tire's service life, but also driving comfort and above all else driving safety that depend on the condition of the tires and the main- tenance of the specified tire inflation pressure.
Incorrect inflation pressures are a frequent cause of tire problems
and flat tires. Tire pressure also has a major effect on your BMW's handling
Tire tread tire damage Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the
3 9 0 d
e3 3 1
Re pa
ir s
Da ta
In de
x
tire or some other vehicle malfunc- . The type of problem can be caused ontact with curbs, etc. This is also for irregularities in the vehicle's dling characteristics, such as a pro- nced tendency to pull to the left or t. Should this occur, respond by ediately reducing your speed. Pro- d carefully to the nearest BMW ter or professional tire center, or e the vehicle towed in to have it, its els and tires inspected. damage (up to and including blow- ) can endanger the lives of both the
icle occupants and other road rs.<
response. Check tire inflation pressures on a regular basis (refer to page 22), at least every two weeks and before every long trip. If you fail to observe these precautions, incorrect tire pressures can cause driving instability and tire damage, ultimately resulting in an accident.<
tread depth.
The tread depth should not drop below 0.12 in (3 mm), even though, for example the legally specified minimum tread depth in Europe is only 0.063 in (1.6 mm). Below a tread depth of 0.12 in (3 mm) there is an increased risk of hydroplaning, even at relatively mod erate speeds and with only small amounts of water on the road.
Tread wear indicators, refer to arrow, are embedded around the tire circum- ference in the base of the tire tread. Their locations are indicated on the tire sidewall with TWI Tread Wear Indi- cator. At a tread depth of 0.063 in
(1.6 the mis
and com veh Avo the exc hea tires form Unu nor
-
flat tion by c true han nou righ imm cee cen hav whe Tire outs veh use
110nTire replacement
Car Safety Standard No. 109. s B and A represent higher levels formance on the laboratory test l than the minimum required by
The temperature grade for this tire is established for a tire that is rly inflated and not overloaded. sive speed, underinflation, or sive loading, either separately or bination, can cause heat buildup
ossible tire failure.<
rm Tire Quality Grading y grades can be found where
Motor Grade of per whee law.
prope Exces exces in com and p
Unifo Qualit
able on the tire sidewall between shoulder and maximum section . For example:
wear 200 on AA erature A
-
applic tread width
Tread Tracti Temp
To maintain good handling and vehicle response, use only tires of a single tread configuration from a single manu- facturer. BMW tests wheel and tire combinations and approves them.
DOT Quality Grades Treadwear Traction AA A B C Temperature A B C
All passenger car tires must con- form to Federal Safety Require-
ments in addition to these grades.<
Treadwear
Traction The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on speci- fied government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
The traction grade assigned to this tire is based on straight-
ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction charac- teristics.<
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled condi- tions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1g) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual condi- tions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road char- acteristics and climate.
Temperature The temperature grades are A (the highest), B and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled condi- tions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive tem perature can lead to a sudden flat tire. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal
111n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire replacement Wheel and tire combinations
e tread pattern are mounted at all wheels. After installing a spare tire sponse to a flat tire you should
ays ensure that a tire of the original cifications is remounted as soon as sible.<
The use of rims and wheel bolts that do not meet the specifica-
s of the original factory-installed ipment will affect the safe operation our vehicle and may cause an acci- t and personal injury. er mix tires of different design, such teel-belted radials with radial bias- ed or bias-ply tires, etc. Mixing tire s will adversely affect roadholding
at
r-
s n y- ci- es ld
h d
sam four in re alw spe pos
tion equ of y den Nev as s belt type
Re pa
ir s
Da ta
In de
x
can lead to loss of vehicle control.<
rage re tires in a cool, dry place, pro- ing them against light whenever sible. Protect the tires against con- with oil, grease and fuel.
e - ng
ur ct
y d/
s
and
Sto Sto tect pos tact
Do not use retreaded tires, since driving safety may be impaired.
This is due to the possible variations in casing structures and, in some cases, to their extreme age, which can lead to a decrease in their durability.<
Tire age The date on which the tire was manu- factured is indicated by the code on the sidewall: DOT ... 3401 indicates that the tire was manufactured in week 34 of the year 2001.
Although tires may have a theoretical service life of up to 10 years, BMW
The right choice Never mount wheels and tires th have not been specifically
approved by BMW for use on your pa ticular model. Although other wheels and tires may theoretically have the same dimensions, variations in factor such as manufacturing tolerances ca result in contact between tire and bod work, ultimately leading to serious ac dents. If non-approved wheels and tir are used, BMW cannot evaluate their suitability, and therefore cannot be he liable for driving safety.<
BMW has tested certain tires for eac tire size, rated them according to roa
all tires after an absolute maximum of 6 years.
safety and approved them. Your BMW center can inform you which tires hav been tested in this way. Observe pos sible national guidelines, e.g. regardi entry into vehicle documents.
Because various systems on yo vehicle, such as ABS, DSC and
the Flat Tire Monitor, rely on the corre combination of tires and wheels for optimal operation, their operation ma be adversely affected if other tires an or wheels are mounted. You should therefore ensure that tire from a single manufacturer with the
112nSpecial characteristics of winter tires Snow chains*
se of BMW narrow-link snow s on winter tires is approved only rs and only on the rear wheels. ly with all manufacturer's safety utions when mounting the chains. t exceed a speed of 30 mph /h) while driving with mounted
chains.
It is not possible to mount snow chains with 18-inch wheels and
.
The u chain in pai Comp preca Do no (50 km snow
tires.<
Choosing the right tire BMW recommends winter tires (M+S radial tires) for driving in adverse winter road conditions. While "all-season" tires (M+S designation) provide better winter traction than summer tires with the load ratings H, V, W, Y and ZR, they generally do not achieve the perfor- mance of winter tires. In the interests of safe tracking and steering response, install radial tires made by the same manufacturer and with the same tread configuration on all four wheels if you elect to mount winter tires.
Tire condition, tire inflation pressure When the tread wears to a depth of less than 0.16 in (4 mm) there is a substan- tial reduction in the tire's ability to pro- vide adequate traction under winter driving conditions. To ensure continued safety, tires with this amount of tread wear should always be replaced.
Comply with the specified tire inflation pressures and be sure to have the wheel and tire assemblies balanced every time you change the wheels/tires
Never exceed the maximum speed approved for your specic winter
tires. Unprofessional attempts by laymen to service tires can lead to damage and accidents. Have this work performed by skilled professionals only. Any BMW center has the required technical knowledge and the proper equipment and will be happy to assist you.<
113n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
close w the hood to fall from a height of ut 4 in (10 cm) so that it audibly ages.
Hood
To unlock Pull the lever located under the left- hand side of the instrument panel.
3 9 0 d
e7 5 9
To open Pull the release handle and open the hood.
3 9 0 d
e7 6 0
Re pa
ir s
Da ta
In de
x
To avoid injuries, be sure that the travel path of the hood is clear
n it is closed, observing the same cautions recommended for all ing procedures. u notice that the hood is not com- ely closed while driving, stop imme- ely and close it securely.<
Do not attempt to service your vehicle if you do not have the
required technical background. Failure to work in an informed, professional manner when servicing components and materials constitutes a safety hazard for vehicle occupants and other road users. If you are not familiar with the guidelines, please have the opera- tions performed by your BMW center.<
To Allo abo eng
3 9 0 d
e7 6 1
whe pre clos If yo plet diat
114nEngine compartment essentials
id (under rofilter) 118
mp
3 Engine oil dipstick 115
4 Engine oil filler neck 116
5 Coolant expansion tank 118
ervoir for the intensive-cleaning tem 115
ervoir for the windshield and dlamp washer system 115
6 Res sys
7 Res hea
1 Reservoir for brake flu the housing of the mic
2 Auxiliary terminal for ju starting 133
3 9 m
d e1
5 0
115n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Washer fluids Engine oil
ecking oil level ark the vehicle on a level surface llow the engine to run at operating mperature for at least 15 seconds
Ch 1. P 2. A
te
3 9 m
d e0
4 2
Re pa
ir s
Da ta
In de
x
t idle, then shut it off fter approx. one minute, pull the ipstick out and wipe it off with a lean lint-free cloth, paper towel, or imilar material arefully push the dipstick all the ay into the guide tube and pull it ut again he oil level should be between the o marks on the dipstick.
ith fuel economy, oil consumption irectly influenced by your driving e and vehicle operating conditions.
id. 7 r
le.
in o
.
a 3. A
d c s
4. C w o
5. T tw
As w is d styl
Headlamp and windshield washer system Capacity in US quarts (liters). Windshield washer:
3 9 m
d e1
2 8
Intensive-cleaning washer reservoir Capacity approx. 1.1 US quarts (1.0 liter).
3 9 m
d e1
2 9
Approx. 3.7 US quarts (3.5 liters) With headlamp-washing system: Approx. 6.3 US quarts (6.0 liters).
Fill with water and if required with a washer antifreeze (according to manu- facturer's recommendations).
We recommend that you mix the washer fluid before adding it to
the reservoir.<
Fill with intensive-cleaning washer flu It resists freezing down to approx. 1 7 (27 6) and is available from you BMW center.
Antifreeze agents or intensive- action washer fluids for the
washer systems are highly inflammab For this reason, keep them away from sources of flame and store them only their original containers. Store them s that they are inaccessible to children Comply with the instructions on the containers.<
116nEngine oil
Continuous exposure to used oil has caused cancer in laboratory g. is reason, any skin areas that into contact with oil should be ghly washed with soap and
. oil, grease, etc., out of reach of en. Comply with warning labels formation on containers.<
Comply with the applicable envi- ronmental laws regulating the dis- of used oil.<
testin For th come thorou water Store childr and in
posal
4 6 0 d
e1 8 9
To add oil While you should wait until the level has dropped to just above the lower marks before adding oil, you should never
3 9 m
d e1
1 0
oil will damage the engine. allow the oil level to fall below this mark.
BMW engines are designed to operate without oil additives; the
use of additives could lead to damage in some cases. This is also true for the manual transmission, the differential, and the power steering system.<
Recommendation: have the oil changed by your BMW center only.
117n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Engine oil Coolant
Do not add coolant to the cooling system when the engine is hot.
u attempt to do so, escaping lant can cause scalds. To avoid the sibility of secondary damage, never anything other than factory- roved, nitrite and amino-free nded-duty antifreeze with corrosion
bitor. Your BMW center is familiar these specifications.
ifreeze and anti-corrosion agents hazardous to health. You should ays store them in their original con- ers and in a location which is out of h of children. For this reason, do spill antifreeze with corrosion inhib- on hot engine parts. It could ignite
b-
s
ur
s
all
If yo coo pos use app exte inhi with Ant are alw tain reac not itor
Re pa
ir s
Da ta
In de
x
cause burns.<
Specified engine oils The quality of the engine oil is extremely important for the function and service life of an engine. Based on extensive testing, BMW approves only certain grades of engine oil.
Use only approved "BMW High Perfor- mance Synthetic Oil."
If you are unable to obtain "BMW High Performance Synthetic Oil," you can add small amounts of synthetic oil in between oil changes. Only use oils with the API SH specification or higher.
Ask your BMW center for details concerning the specific "BMW
Viscosity ratings Viscosity is the oil flow rating as esta lished in SAE classes.
The selection of the correct SAE clas depends on the climatic conditions in the area where you typically drive yo BMW.
Approved oils are in SAE classe 5W-40 and 5W-30.<
These oils may be used for driving in ambient temperatures.
High Performance Synthetic Oil" or "special oils" which have been approved.<
You can also call BMW of North America at 1-800-831-1117 or visit this website: www.bmwusa.com to obtain this information.
118nCoolant Brake fluid
Brake fluid is hygroscopic, that is, it absorbs moisture from the air ime. er to ensure the safety and reli- of the brake system, have the fluid changed every two years at
center. Refer also to the Service arranty Information Booklet (US
ls) or the Warranty and Service Booklet (Canadian models). fluid is hazardous to health and ges the vehicle's paint. You d always store it in its original iner and in a location which is out ch of children. Do not spill the nd do not fill the brake fluid reser-
over t In ord ability brake a BMW and W mode Guide Brake dama shoul conta of rea fluid a
eyond the MAX mark. The brake ould ignite upon contact with hot e parts and cause serious burns.<
Comply with the applicable envi- ronmental laws regulating the dis- of brake fluid.<
voir b fluid c engin
posal
Checking coolant level and adding coolant Correct coolant level when the engine is cold (approx. 68 7/20 6):
3 9 m
d e1
1 1
Brake fluid level The warning lamp for the brake system hydraulic circuits comes on and/or the message "CHECK BRAKE FLUID" appears in the Check Control: Brake fluid level too low.
To add brake fluid The brake fluid reservoir is located under the microfilter housing on the driver's side of the vehicle. For adding brake fluid or for determining and cor- recting the cause of brake fluid loss, consult your BMW center. Your BMW center is familiar with the specifications
In the translucent container's visible range, as far as the graduation marked KALT/COLD.
1. Turn the cap counterclockwise slightly in order to allow accumulated pressure to escape
2. If the coolant is low, slowly add coolant until the correct level is reached do not overfill.
Comply with the applicable envi- ronmental laws regulating the dis-
posal of extended-duty antifreeze with corrosion inhibitor.<
for factory-approved brake fluids (DOT 4).
Brake fluid loss may result in extended brake pedal travel. If this occurs, refer to the information on page 108.
119n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
ce and Warranty Information let (US models)/Warranty ervice Guide Booklet
adian models) ditional information on mainte- intervals and procedures, please o the Service and Warranty Infor- n Booklet (US models) or the War- and Service Guide Booklet (Cana- odels).
recaution against corrosion, it is ble to have the body checked for
ge from rocks or gravel at the time, depending upon operating tions.
The BMW Maintenance System
The BMW Maintenance System has been designed as a reliable means of providing maximum driving and oper- ating safety and as cost-effectively as
3 8 0 u s0
0 8
Service Interval Display Conventional systems rely solely on distance traveled to determine when service is due. The BMW Maintenance System, on the other hand, began many years ago to take the actual conditions under which the vehicle is driven into consideration. After all, different drivers can accumulate mileage in very dif- ferent ways.
From a maintenance point of view, 62,000 miles (100,000 km) of short-dis- tance driving cannot be compared with 62,000 miles (100,000 km) of long-dis- tance highway travel.
Re pa
ir s
Da ta
In de
x
Have your vehicle's maintenance and repairs performed at your center. re that all maintenance work is med in the Service and Warranty ation Booklet (US models) or the nty and Service Guide Booklet dian models). These entries are roof that the vehicle has received r maintenance. They are also a ement for warranty claims.<
possible for you.
Please keep in mind that regular main- tenance is not only necessary for the safety of your vehicle, but also plays a significant role in maintaining its resale value.
In response to this fact, the BMW Main- tenance System monitors operating conditions as the basis for determining the optimum service intervals for your individual vehicle. The BMW Mainte- nance System includes the Engine Oil Service and Inspections I and II.
Determining the maintenance intervals according to the actual loads on the vehicle covers every kind of operating situation. However, even those who drive only short distances significantly less than 6,000 miles (10,000 km) annu- ally should have the engine oil changed at least every 2 years since oil deteriorates over time, regardless of use.
Servi Book and S (Can For ad nance refer t matio ranty dian m
As a p advisa dama same condi
BMW Be su confir Inform Warra (Cana your p
120nTechnical modifications California Proposition 65 Warning
-
t
Light-emitting diodes (LEDs) Light-emitting diodes installed behind translucent lenses serve as the light source for many of the controls and dis- plays in your vehicle. The concept behind their operation is related to that employed for lasers.
Do not remove the protective lens and avoid staring directly at the
unfiltered beam for extended periods (several hours), as inflammation of the iris could result.<
California laws require us to state the following warning:
Engine exhaust, some of its con- stituents, and certain vehicle com
ponents contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Battery posts, terminals and related accessories contain lead and lead
121n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
OBD interface socket
When the fuel filler cap is not properly tightened, the OBD
tem can detect the vapor leak and indicator will light up. If the filler cap ubsequently tightened, the indi- r should go out within a few days.<
s ot e.
r er
d
sys the is s cato
Re pa
ir s
Da ta
In de
x
The Onboard Diagnostic (OBD) inter- face socket is located on the left of the driver's side at the bottom of the instru- ment panel and under a cover. The cover has the letters "OBD" on it.
3 9 0 u s7
3 9
An illuminated indicator inform you of the need for service, n of the need to stop the vehicl
However, the systems should be checked by your BMW center at the earliest possible opportunity.
Under certain conditions, the indicato will blink or flash. This indicates a rath severe level of engine misfire. When this occurs, you should reduce the speed and consult the nearest BMW center as soon as possible. Severe engine misfire over only a short perio of time can seriously damage emis- sions-control components, especially the catalytic converter.
The purpose of the OBD (Onboard- Diagnostics) system is to assure proper emission-control system operation for the vehicle's lifetime by monitoring emissions-related components and systems to detect deterioration and malfunction.
Service Engine Soon warning lamp for Canadian models.
122n
123n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Repairs
124n
mps and bulbs are essential fac- ontributing to the safety of your le. Therefore, comply fully with the ing instructions during bulb ement. If you are not familiar with
f the procedures, consult your center.
Do not touch the glass portion of a new bulb with your bare hands even small amounts of impurities n to the surface and reduce the e life of the bulb. Use a clean paper napkin, or a similar mate- r hold the bulb by its metallic <
Onboard tool kit Windshield wiper blades Lamps and bulbs
The onboard tool kit is located in the luggage compartment lid.
Loosen the wingnut to open.
3 9 4 d
e0 8 0
1. Lift the wiper arm up slightly and hold it firmly
2. Press back the release (arrow) and pull the wiper blade back toward the
3 9 0 d
e7 6 6
acement bulb set is available from MW center.
Always switch off all electrical accessories and systems before ng on them. As an alternative, you lso disconnect the cable from the y's negative terminal. Failure to ve this precaution can lead to circuits. vent injuries and damage,
ly with any instructions provided bulb manufacturer.<
base of the wiper arm 3. Install the new blade and slide the
release back into position.
Use only wiper blades approved by BMW.<
The la tors c vehic follow replac any o BMW
since burn i servic cloth, rial, o base.
A repl your B
worki can a batter obser short To pre comp by the
125n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
n signal indicators/parking ps (side marker lamps), front l-filament bulb, 21 watt
urn the bulb holder to the left and
Tur lam Dua
1. T
3 9 0 d
e6 7 0
Re pa
ir s
Da ta
In de
x
emove emove and replace the bulb.
d
r
r 2. R
Xenon lamps The service life of these bulbs is very long and the probability of a failure is very low, provided that they are not switched on and off an unusual number of times. If one of these bulbs should nevertheless fail, it is possible to con- tinue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this.
Never attempt to perform bulb changes or any other service oper-
ations on the xenon lamps. Always have them serviced by professional techni- cians. The extremely high voltages at which these lamps operate constitute a
Standing lamps 10 watt bulb
The bulb holder and reflector are
3 9 0 d
e6 6 9
potentially lethal safety hazard.<
When cleaning the headlamps, please observe the following:
>Do not clean by wiping with a dry cloth (this causes scratches). Never use abrasives or strong solvents to clean the covers
>Remove dirt and contamination (such as insects) by soaking with BMW Car Shampoo and then rinsing with ample water
>Always use a deicer spray to remove accumulated ice and snow never use a scraper.<
single unit and are both change at the same time.<
1. Turn the bulb holder with reflector to the left (arrow) and remove
2. Disconnect the plug 3. Plug the new bulb holder into the
plug connector. Be sure that it is securely engaged
4. Insert the reflector with bulb holde and turn to the right as far as possible.
126nLamps and bulbs
amps lamp/side marker lamps: emitting diodes ining bulbs: 21 watt
Tail l Rear Light- Rema
3 9 4 u s7
2 1
n signal indicator white
r lamp/side marker lamps red
kup lamps white
ke lamps red
lector red
Please contact your BMW center if there is a defect in the rear side marker lamp assembly.<
-
-
1 Tur
2 Rea
3 Bac
4 Bra
5 Ref
lamp/
Side turn signal indicators 5 watt bulb
1. Use finger pressure against the rear
3 9 0 d
e7 6 8
Front fog lamps HB4, 51 watt bulb
The bulb is pressurized. There- 3 9 m
d e1
0 4
end of the lens (arrow) to press it for- ward for removal
2. Apply gentle pressure to the bulb while turning it to the left to remove.
fore, wear safety glasses and pro tective gloves. Failure to observe these precautions can result in physical injury if the bulb breaks.<
1. Pull the cover panel next to the head lamp forward to remove
2. Loosen the screw, refer to arrow, and swing the lamp assembly out
3. Release the spring on the back of the lamp and turn the cover to the left
4. Release the clamp, remove the contact base and replace the bulb.
127n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
ense plate lamps att bulb
sert a screwdriver into the slot nd press to the left (arrow); this dis-
er
Lic 5 w
1. In a
3 9 4 d
e7 7 2
Re pa
ir s
Da ta
In de
x
dges the lamp emove the lamp and replace the ulb.
e.
lo 2. R
b
1. Use the upper handle to fold down the side panel in the luggage com- partment
2. Turn the corresponding bulb holder to the left (arrow) and remove it
3 9 4 d
e7 6 9
Center (high-mount) brake lamp 21 watt bulb
1. Open the luggage compartment lid 2. Use a screwdriver to unclip the cov
3 9 4 d
e1 2 3
3. Press the defective bulb gently and turn it to the left. Remove the bulb and replace it
4. Insert the bulb holder and turn to the right as far as possible.
panel (on the underside of the storage tray) (arrow)
3. Turn the bulb holder to the left and remove
4. Apply gentle pressure to the bulb while turning it to the left to remov
128nRepairing a flat tire
is part of the M Mobility m Off switch
This syste 1 On/
3 9 m
d e1
0 6
nection hose with pressure ge for connecting the compressor the sealant container or to con- t the compressor to the wheel
ssure gauge for indicating the tire ssure
nector hose from the sealant tainer to the wheel
rning sticker for maximum speed
g and cable for the cigarette ter socket
tective gloves (not illustrated)
2 Con gau with nec
3 Pre pre
4 Con con
5 Wa
6 Plu ligh
7 Pro
Precautions in case of a flat tire: Stop the vehicle as far as possible
from passing traffic. Switch on the hazard warning flashers. Turn the steering wheel to the straight- ahead position, remove the key and engage the steering lock. Shift into 1st or reverse and engage the parking brake. All passengers should be outside the vehicle and well away from your imme- diate working area (behind a guardrail, for instance). If necessary, set up your warning tri- angle or portable hazard warning lamp on the roadside at an appropriate dis-
The M Mobility system is located in the luggage compartment under the floor mat:
1. Lift up the floor mat and then raise 3 9 m
d e1
3 2
tance from the rear of the vehicle. Comply with all safety guidelines and regulations.<
M Mobility system For repairing a flat tire, you will find an M Mobility system in the BMW M5. With the aid of this system, you can apply a liquid sealant to the inside of the tire, thereby sealing off the damaged area, and then continue driving.
The M Mobility system makes the trans- port of a spare wheel superfluous and minimizes the curb weight.
the front cover panel 2. Loosen the M Mobility system from
its storage location.
Please note that the system's sealant container must be
replaced every three years by your BMW center if the device is not used.<
129n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Repairing a flat tire
lip open the cover and pull out the nclosed protective gloves. Take out ose 2 with the pressure gauge and crew it to the connection on the ealant container, as shown in the
ct p
id
3. F e h s s
3 9 m
d e1
4 3
Re pa
ir s
Da ta
In de
x
lustration ake sure that the system has been
witched off (position 0). Take out lug 6 and plug it into the cigarette ghter socket in the passenger com- artment (refer to page 98)
il 4. M
s p li p
Use the M Mobility system If possible, leave the foreign object in the tire.<
Do not exceed the maximum speeds indicated below, as an
accident could result. Before you use the M Mobility system, read the warnings and danger notices on the device carefully.<
1. Remove the warning sticker 5 for maximum speed that is located on top of the device and affix it to the steering wheel
2. Take off the round cover and extra hose 4. Unscrew the valve stem ca from the defective tire, then screw the hose onto the valve stem. Avo losing the valve stem cap
3 9 m
d e1
4 2
130nRepairing a flat tire
ke out the hose with the pressure uge and screw it onto the valve. ke out the plug and plug it into e cigarette lighter socket in the
t t
8. Ta ga Ta th
3 9 m
d e1
4 5
ssenger compartment eset the tire pressure to 29 psi 00 kilopascal), and: Increase the tire pressure: turn on the M Mobility system (position I). To check the new tire pressure briefly turn off the device Reducing tire pressure: turn the screw on the back of the pressure gauge, a valve located there will open
pa 9. R
(2 >
>
5. Make sure that the screw on the rear of the pressure gauge 3 is tightened down. Turn on the M Mobility system (position I, refer to illustration) and
3 9 m
d e1
4 4
7. Right afterward, drive at least 1.2 miles (2 km), so that the liquid sealant distributes evenly throughou the inside of the tire. If possible drive at no less than 15 mph (20 km/h), bu not more than 40 mph (60 km/h). Stop in a suitable spot
allow 3 minutes to elapse, to let the sealant flow in. At this point, it is insignificant what the tire pressure is
6. Turn the device off. Disconnect the connector hose from the sealant container and the wheel valve. Stow the M Mobility system in the luggage compartment
131n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Repairing a flat tire Battery
Battery posts, terminals and related accessories contain lead
lead compounds. Wash hands after dling.<
tery care battery is completely maintenance- . That means that the original elec- te will normally last for the service
of the battery under moderate cli- ic conditions.
Please consult the staff at your BMW center whenever you have
questions concerning the battery. battery is completely maintenance- ; the following section is provided
n- r
irt y
and han
Bat The free troly life mat
any The free
Re pa
ir s
Da ta
In de
x
your information only.<
Never disconnect the battery when the engine is running; the
uing voltage surge would seriously age the vehicle's onboard elec- ic systems.<
for
ens dam tron
If the inflation pressure does not hold, complete step 10 and then
repeat steps 7 through 10. The use of the M Mobility system may be ineffective if the damaged area in the tire is larger than approx. 0.15 in (4 mm). If it should prove impossible to restore the tire to operational status using the M Mobility system, please contact the nearest BMW center or BMW Roadside Assistance at 1-800-332-4269.<
10. Unscrew the hose from the valve and stow the M Mobility system in the luggage compartment. Screw the cap back onto the valve stem.
Replace the defective tire as soon as possible and have the wheel and tire balanced. Reactivate the Flat Tire Mo itor, for additional information refer to page 82. Have the M Mobility system recharged. Contact your BMW cente for this.
Protect valve stems and valves from d using screw-on valve stem caps. Dirt valve stems frequently lead to slow pressure loss.
When you start driving again, do not exceed the permissible maximum speed of 50 mph (80 km/h).
You will find corresponding instructions for using the M Mobility system on the device.
132nBattery Fuses
luggage compartment e handle to pull down the trim on ht wall.
In the Use th the rig
3 9 4 d
e6 7 8
Do not attempt to repair a blown fuse or replace it with a fuse g a different color or amperage . Installing the wrong fuse could a fire in the vehicle resulting from uit overload.<
havin rating cause a circ
Charging the battery Recharge the battery only with the engine off, using the auxiliary terminals provided in the engine compartment (for information on these terminals refer to "Jump-starting" on page 133).
Avoid environmental pollution when disposing of old batteries.<
Return used batteries to a recy- cling point or your BMW center.
Maintain the battery in an upright posi- tion for transport and storage. Secure the battery to prevent it from tilting during transport.<
In the glove compartment Open the glove compartment and turn the two white quick-release fasteners to the left.
3 9 0 d
e0 8 5
133n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Use one jumper cable (+) to con- nect the positive terminal of the battery in the support vehicle with the auxiliary positive terminal pro- vided in the engine compartment of
Jump-starting
Do not use spray starter fluids to start the engine.
When your battery is discharged you can used two jumper cables to start your vehicle with power from the bat- tery in a second vehicle. You can also use the same method to help start another vehicle. Use only jumper cables with fully insulated handles on the ter- minal clamps.
Do not touch high-voltage wiring and cables on a running engine.
There is a risk of fatal injury if you do this. Carefully observe the following instructions to avoid personal injury and/or damage to one or both vehi-
1. Ensure that the battery in the sup- port vehicle is also rated at 12 volts. This information is pro- vided on the top of the battery casing
2. Do not disconnect your battery from your vehicle's electrical system. Switch off all electrical accessories in both vehicles
3. Make absolutely certain that there is no contact between the body- work of the two vehicles short cir cuit hazard
4. Start the engine on the support vehicle and allow it to run
Re pa
ir s
Da ta
In de
x
your BMW specifically for jump- starting. The cover of the auxiliary terminal for use in jump-starting your BMW is identified by a "+" symbol, refer to illustration. Flip the cap out to open
cles.<
-
5.
3 9 m
d e1
1 2
134nJump-starting
6. Next, connect one end of the other jumper cable () to either the sup- port vehicle's negative battery ter- minal or a suitable ground on its
3 9 0 d
e1 4 6
7. Start the support vehicle's engine and let it run at an increased idling speed for a few minutes. Start the engine on the vehicle needing the jump-start, and allow it to run as usual. If the first start attempt is not successful, wait a few minutes before another attempt in order to allow the discharged battery to recharge
8. Before disconnecting the jumper cables let the engines run for a few minutes
9. Then disconnect the jumper cables in reverse sequence.
Depending on the cause of the fault,
Always adhere to this sequence when connecting jumper cables;
failure to observe this procedure can lead to sparks at the battery terminals and pose an injury hazard.<
have the battery recharged by your BMW center.
135n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Towing the vehicle
Keep the vehicles in line and avoid towing at an offset angle. Ensure
the tow rope connecting the two icles is tight, with no slack, before ting off.<
The towed vehicle should always be the lighter of the two vehicles.
is is not the case, it is no longer sible to control vehicle response.<
-starting better to start the vehicle's engine ump-starting. For instructions on p-starting, refer to page 133.
er attempt to use your vehicle to
n
ot-
that veh star
If th pos
Tow It is by j jum
Nev
Re pa
ir s
Da ta
In de
x
h another vehicle, as damage to the rgy-absorbing bumpers could lt.
, rol se s-
f es
pus ene resu
Tow fitting The screw-in tow fitting is stored in the onboard tool kit; be sure that it remains in the vehicle at all times. This fitting
3 9 0 d
e0 8 7
Rear: Apply pressure to the arrow symbol o the cover; remove the cover.
Screw the tow fitting in until it b 3 9 4 d
e0 8 8
is designed for installation in the tow sockets located at the front and rear of the vehicle, and is intended for towing on proper road surfaces only. It should not be used to pull a vehicle out of deep snow, mud, sand, etc. Always observe all applicable towing laws and regulations.
Access to tow sockets Front: Apply pressure to the arrow symbol on the cover; remove the cover.
toms firmly. Failure to screw the fitting in securely can lead to thread damage. Never attach tie-down hooks, chains straps, or tow hooks to tie rods, cont arms, or any other part of the vehicle suspension, as severe damage to the components will occur, leading to po sible accidents.<
Use only a nylon towing strap to tow the vehicle. The inherent resilience o this material helps protect both vehicl from sudden jerking movements.
136nTowing the vehicle
t t
Towing a vehicle 1. Shift lever in neutral 2. Towing speed:
Max. 45 mph (70 km/h) 3. Towing distance:
Max. 95 miles (150 km/h) 4. Leave the ignition key in position 1
to ensure that the brake lamps, turn signals, horn and windshield wipers remain operative, and to prevent the steering lock detent from engaging
5. Switch on the hazard-warning system (comply with official regula- tions).
Find some means of identifying the vehicle in tow, for instance, place a sign
Towing with a commercial tow truck >Do not tow with sling-type equipmen >Use a wheel-lift or flatbed equipmen
3 8 0 u s1
2 4
or warning triangle in the rear window.
Make sure that the ignition key remains in position 1 even if the
electrical system has failed to prevent the steering lock from engaging. The steering and brakes are without power assist when the engine is not running. This means that increased effort is required for steering and braking.<
>Please comply with applicable towing laws.
Never allow passengers to ride in a towed vehicle for any reason.<
137n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
138n
139n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Index
140n
t system
Engine data
BMW M5
Displacement Number of cylinders
cu in (cm3) 301.5 (4,941) 8
Maximum output at engine speed
hp rpm
394 6,600
Maximum torque at engine speed
lb ft (Nm) rpm
368 (500) 3,800
Compression ratio e 11.0
Stroke Bore
in (mm) in (mm)
3.50 (89.0) 3.70 (94.0)
Fuel-injection system Digital electronic engine-mana
141n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x.: 38.1 ft (11.6 m)
Dimensions
All dimensions are given in inches (mm). Minimum turning cir
3 9 m
u s0
0 3
cle dia
142nWeights
cluded) 5)
0)
0)
5)
BMW M5
Curb weight (with one person, ready for operation, full tank of fuel, options not in lbs. (kg) 4,024 (1,82
Approved gross vehicle weight lbs. (kg) 5,049 (2,29
Approved front axle load lbs. (kg) 2,426 (1,10
Approved rear axle load lbs. (kg) 2,701 (1,22
Approved roof load capacity Approved axle loads and approved gross vehicle weight may not be exceeded.
lbs. (kg) 220 (100)
Luggage compartment capacity cu ft (liters) 16.2 (460)
143n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Capacities
tes
l specification: page 22
details: page 115
details: page 117
W High Performance Synthetic ," for details: page 117
change at the 1,200-mile-service, n the oil never needs to be nged again
No
70) 0)
Fue
.5)
.0)
.0)
For
For
"BM Oil
Oil the cha
Re pa
ir s
Da ta
In de
x
Fuel tank of which reserve
gal. (liters) gal. (liters)
approx. 18.5 (approx. approx. 2.5 (approx. 1
Windshield washer system with headlamp washer system Intensive cleaning system
quarts (liters) quarts (liters) quarts (liters)
approx. 3.7 (approx. 3 approx. 6.3 (approx. 6 approx. 1.1 (approx. 1
Cooling system including heater circuit
quarts (liters) 12.7 (12.0)
Engine oil filter change quarts (liters) 6.9 (6.5)
Manual transmission and differential
144n
145n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Index
Everything from A to Z
A A
A A A
A
A A A A A A
41
12
Bulbs and lamps 124
C California Proposition
65 Warning 120 Capacities 143 Car telephone 97 Cargo loading 102 Cellular phone 97
refer also to the separate Owner's Manual 97
BS (Antilock Brake System) 17, 107 ctivated-charcoal filter 91 ctive seat 43 dding brake fluid 118t engine coolant 118t engine oil 116t washer fluid 115t djusting backrest 41
Ashtray front 97 rear 98
Attach vacuum cleaner 98 AUC (Automatic recircu-
lated-air control) 90 Automatic climate
control 87 removing condensation from the windows 89
Automatic cruise control 61 Automatic curb monitor 46
B Backrest, adjusting Backup lamps 59
bulb replacement Battery 131
care 131 charging 131 discharged 133t
Belts 44 Beverage holder 97 Blower 89 BMW active seat 43
head mirr seat stee temp ir co ir dis ir pre ir sup irbag larm
2 nce
1
7
Center (high mount) brake lamp 127
Central locking system 26 key 31
Charging the battery 132t CHECK button 66 Check Control 66 Check engine oil
level 115t Check tire inflation
pressure 22t, 109 Child seats 51 Child-restraint
restraints 43 ors 48 s 40 ring wheel 47 erature 89
nditioning 90 tribution 89 ssure, tires 22, 109 ply 89 s 17, 49 system 35 rage points
Automatic dimming exterior mirror 48 interior rearview mirror 48
Automatic recirculated-air control (AUC) 90
Automatic steering wheel adjustment 47
Automatic windshield washer 60
Average fuel consumption 75
Average speed 76
BMW comfort seat 4 BMW High Performa
Synthetic Oil 117 BMW M sport seat 4 BMW Maintenance
System 119 BMW Universal
Transmitter 93 Bottle holder, refer to
Beverage holder 9 Brake fluid 118
disposal 118
08
106
installation 53 Child-restraint system with
tether strap 52 Cigarette lighter 98 Clock 70
refer also to the "Owner's Manual for Onboard Computer"
Ancho child-restraint system with tether strap 52
Antifreeze 118 Antilock Brake System
(ABS) 17, 107 Aquaplaning 107, 109
Avoiding unintentional alarms 36
Axle loads 142
Brake hydraulic syste brake pads 16
Brake system 108 brake fluid level 1 brake linings 108 malfunctions 108t
Break-in procedures
6t
Everything from A to Z 147n
Ov er
vi ew
Co nt
ro ls
ce
nt
est 99
27 8
Electrical malfunction doors 27t fuel filler door 20t luggage compartment lid 32t sliding/tilt sunroof 39t
Elements of operation 14 Emergency release of
luggage compartment lid from luggage compartment's interior 34
Engine compartment 114 Engine coolant 118
Cockpit 14 Code 76
activating 76 deactivating 76 refer also to the "Owner's Manual for Onboard Computer" selecting 76
Comfort seat 42 Compartments 96 Computer 73
refer also to the "Owner's Manual for Onboard
Cup holder, refer to Beverage holder 97
Curb weight 142
D Date
calling up 70 changing 70 refer also to the "Owner's Manual for Onboard Computer"
Daytime driving lamps 84
Displays, instrume cluster 15
Disposal brake fluid 118 coolant 118 engine oil 116
Distance from destination 74
Divided rear backr Door key 26 Doors
manual operation remote control 2
M ai
nt en
an Re
pa ir
s
cking 27 s 110 bility
ntrol
ontrol 81 ontrol
temperature gauge 65 Engine data 140 Engine oil
checking level 115 consumption 115 dipstick 115 disposal 116 grades 117 level 16 pressure 16 temperature gauge 64
Engine performance 140
Computer" remote control 77
Configuring individual settings 55
Consumption 75 Convenience operation of
windows and sliding/tilt sunroof 27
Coolant 117 disposal 118
Coolant temperature gauge 65
DBC (Dynamic Brake Control) 17, 80
Deactivating interior motion sensor 36 tilt alarm sensor 36
Deep water 107 Defrosting position 89 Defrosting the
windows 89t Digital clock 70
refer also to the "Owner's Manual for Onboard Computer"
unlocking and lo DOT Quality Grade Driving notes 107 DSC (Dynamic Sta
Control) 17, 80 Dynamic Brake Co
(DBC) 17, 80 Dynamic Driving C Dynamic Stability C
(DSC) 17, 80
E
Da ta
In de
x
Coo Cop Cov Crui Crui
dows 36 exterior
Estimated time of arrival 75 Exterior mirrors 48
automatic dimming 48 electrical heating 48
ling, maximum 90 yright 4 er, roller sun blinds 92 se control 61 sing range 75
Dimensions 141 Disconnecting the
battery 133t Displacement 140 Display lighting 85
Electric power win Electrical heating,
mirror 48
Everything from A to Z
sis 0 09
11
ion
K Key Memory 55 Key with remote control 26 Keys 26
L Lamps and bulbs 124 Lashing eyes for attaching
cargo straps 34, 102 Length 141 License plate lamps, bulb
F Failure messages 66 Filling capacities 143 First-aid kit 20 Fittings, tow starting and
towing 135t Flashlight 96 Flat tire 109 Flat Tire Monitor 82 Flat tire, repairing 128 Fog lamps 85
bulb replacement 126t
H Handbrake 17, 58 Hands-free system 97 Hazard warning triangle 20 Head protection airbags 49 Head restraints 43
adjusting 43 Headlamp cover,
care 125t Headlamp flasher 59 Headlamp washer
system 115
Hydraulic Braking As refer to DBC 17, 8
Hydroplaning 107, 1
I Ice warning 63 Identification, tires 1 Ignition key 26 Ignition lock 56 Imprint 4 Independent ventilat
rked- em 92
9
5 5
nboard 121
replacement 127t Lighter 98 LIGHTS ON warning 84 Locking and unlocking the
doors 27 Low beams 14, 84 Low-fuel warning lamp 64 Luggage compartment 34
capacity 142 manual operation 32t opening from the inside 33 opening separately 32
Folding rear backrest 99 Follow me home lamps 84 Frost protection,
radiator 118 Fuel consumption 75
average 75 Fuel filler door 20
manual operation 20t Fuel gauge 64 Fuel quality 22 Fuel specifications 22 Fuel tank capacity 143
Headlamp washers 61 Headrests 43 Heated seats 46 Heating with vehicle
stopped 90 Heavy cargo 102 Height 141 Height adjustment
seats 41 steering wheel 47
High beams 18, 59, 85 High Performance Synthetic
system, refer to Pa car ventilation syst
Indicator lamps 16 Inflation
pressure 22t, 10 INSPECTION 65 Instrument cluster 1 Instrument lighting 8 Intensive cleaning
system 115 Interface socket for O
Diagnostics (OBD) Interior lamps 86
r 36
securing separately 32
G Gasoline gauge 64 Gasoline quality 22 Glove compartment 96 Gross vehicle weight 142
Oil 117 High-mount brake lamp 127 Holder for canned
beverages 97 Hood 113
release 113t Horn 14
Interior mirrors 48 Interior motion senso
deactivating 29
J Jump-starting 133t
tant,
Everything from A to Z 149n
Ov er
vi ew
Co nt
ro ls
ce
, re Wa let arr e B t ls) to
17
24t g
Passenger-side mirror tilt function 46
PDC Park Distance Control 78
Performance Recognition for M Dynamic Driving Control 81
Pocket flashlight 96 Pollen filter 91 Power seat 41 Power windows 36
safety switch 37 Pressure monitor, tires 82
Luggage compartment lid 32 emergency release from luggage compartment's interior 34 opening from the inside 33 opening from the outside 33 remote control 29 securing separately 32 unlocking in case of electrical
Manual transmission 58 Maximum cooling 90 Memory, adjustment of seat,
mirror, steering wheel 45 Microfilter 91 MID (Multi-Information
Display) 69 Mirrors 48
adjusting 48 heating 48 position adjustment memory 45 self-defrosting 48
Oil change interval the Service and Information Book models) or the W and Service Guid (Canadian mode
Oil pressure, indica lamp 16
Oil specification 1 OILSERVICE 65 Onboard tool kit 1 Opening and closin
from inside 31
M ai
nt en
an Re
pa ir
s
m Lug Lug Lum
M M D
C M M M+ Ma Ma Ma
re
trol
ion
"Owner's
Pressure, tires 22t, 109
Q Quality grades, tires 110
R Rain sensor 60 Reading lamps 86 Rear backrest, folding 99 Rear window defroster 90 Rearseat backrest,
folding 99
alfunction 32t gage net 34 gage straps 34 bar support 41
ynamic Driving ontrol 81 obility system 128
S tires 112 intenance 65, 119t lfunction displays 66
Modifications, technical 120
Multifunction buttons, steering wheel 19
Multifunction switch 59 Multi-Information Display
(MID) 69
O OBD interface socket 121 Odometer 63 Oil
from outside 27 with the key 27
Outside temperatu display 63
P Park Distance Con
(PDC) 78 Parked-car ventilat
system 92 activating 72 refer also to the
Da ta
In de
x
ard
58 84
Rearview mirrors 48 Recirculated-air mode 90 Refueling 20
nual operation doors 27t fuel filler door 20t luggage compartment lid 32t sliding/tilt sunroof 39t
additives 116 checking level 115 consumption 115 grades 117
Manual for Onbo Computer"
Parking brake 17, Parking lamps 14,
fer to rranty (US anty ookle
r
Everything from A to Z
R
R R R R
R R R
R
R R
R R R R
S S S S S
S
po
cs o
1
Summer tires 111 Switching off the engine 57 Symbols 8
T Tachometer 64 Tail lamps 126
bulb replacement 126t Tank capacity 143 Technical
modifications 120
eleasing the fuel filler door after an electrical malfunction 20t eminder signal (Memo) 71 emote control 28, 77 emote control key 26 emoving condensation from windows 89t epairing flat tire 128 eplacement key 26t eplacement of lamps and bulbs 124t
Seats 40 adjusting 40 heating 46 position adjustment memory 45
Securing cargo 34, 102 Service and Warranty 10 Service and Warranty Infor-
mation Booklet (US models) 119
Service Interval Display 65, 119
Socket for attaching supplies 98
Spare key 26 Speakers 97 Special characteristi
winter tires 112 Special oils 117 Specified engine oils Speed 76
average 76 Speed limit 73 Speedometer 15
epl wip epo ese sys esid olle oof oof rac
a a a a
e
85 56 t
ent 47
t
multi-
Telephone preparation 97 Temperature display
engine coolant 65 engine oil 64 outside temperature 63
Temperature gauge coolant 65 engine oil 64
Temperature layering 91 Tether strap 52
child-restraint system 52 Thigh support
adjustment 41
acement of windshield er blades 124t rting safety defects 10 rvoir, washer tem 115t ual heating mode 90 r sun blinds 92 load capacity 142 -mounted luggage k 103
Setting alarm in an emergency 77
Side airbags 49 Side Impact Head Protection
System 49 Side-marker lamps 84 Sitting safely 40
with airbags 40 with safety belt 40
Ski bag 100 Sliding/tilt sunroof 38
closing after an electrical
Sport seat 41 Standing lamps 14, Starting the engine
assistance 133t problems 57, 133
Starting, vehicle 56 Steering wheel 47
automatic adjustm lock 56 position adjustmen memory 45
Steering wheel with
wner's d
ts 96
Third brake light 127 Through-loading system 99 Tilt alarm sensor 36
deactivate 29 Tilt function, passenger-side
mirror 46
fety belts 44 fety buttons 31 fety defects, reporting 10 fety switch for power windows 37 at heating 46
malfunction 39t convenience operation 27 power loss or malfunction 39t
Snow chains 112
function buttons 1 Stopwatch 71
refer also to the "O Manual for Onboar Computer"
Storage compartmen
wer
f
17
Everything from A to Z 151n
Ov er
vi ew
Co nt
ro ls
ce
ead
6 0
ice n
t
X Xenon lamp 125
Time calling up 70 changing 70 refer also to the "Owner's Manual for Onboard Computer"
Time of arrival, estimated 75
Timer 70 Tire
condition 109 damage 109t inflation
Trip odometer 63 Trunk, refer to Luggage
compartment 32 Turn signal indicator 18, 59
bulb replacement 125t Turning circle 141
U Uniform Tire Quality Grading
(UTQR) 110 Universal Transmitter 93 Use antifreeze,
W Warm feet cool h Warning lamps 16 Warning messages Warning triangle 2 Warranty and Serv
Booklet (Canadia models) 119
Washer fluids 115 Washer reservoir,
filling 115t Washer system 60
M ai
nt en
an Re
pa ir
s
107 he
1
ration 27
60 115t
pressure 22t, 109 labeling 111 pressure monitor 82 replacement 110 tread 109
Tire Quality Grading 110 Tools 124t Torque 140 Tow fittings 135t Towing the vehicle 135t Track 141 Traction Control System,
radiator 118t Used batteries 132
V Vehicle battery 131 Vehicle key 26 Vehicle Memory 55 Ventilation 91 Ventilation in the rear 91 Ventilation while parked
activating 72 refer also to the "Owner's Manual for Onboard
Water on the roads Wear indicator in t
tires 109 Weights 142 Wheel and tire
combinations 11 Wheelbase 141 Width 141 Windows 36
convenience ope defrosting 89
Windshield washer reservoir, filling
Da ta
In de
x
60
ine 3t
refer to DSC 80 Transmitter key 26 Transporting children
safely 51 Tread depth, tires 109 Tread wear indicator 109
Computer" Ventilation while parked,
refer to Parked-car venti- lation system 92
Ventilation, draft-free 91
Windshield wiper Winter tires 112 Wiper system 60 Working in the eng
compartment 11
91
6
Guide
Fuel stops
To ensure that you always have conve- nient access to all essential information when you stop for fuel, we recommend that you take the time to fill out the adjoining chart by entering the data that apply to your vehicle. Consult the index for individual specifi- cations.
Fuel
Please enter your preferred fuel here.
Engine oil
The space between the two marks on the dipstick corresponds to approx.
Designation
Quality
mer tires Winter tires
rear front rear
1.1 US quarts (1 liter).
Tire inflation pressures
Up to 4 persons
5 persons or 4 plus luggage
Sum
front
The Ultimate Driving Machine
0 1
4 1
0 1
5 6
8 3
0 u
e
More about BMW
bmwusa.com
Related manuals for BMW M5 Sedan 5 Series 2003 Owner's Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the 5 Series BMW works, you can view and download the BMW M5 Sedan 5 Series 2003 Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for BMW 5 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a BMW 5 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the BMW M5 Sedan 5 Series 2003 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This BMW M5 Sedan 5 Series 2003 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download BMW M5 Sedan 5 Series 2003 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print BMW M5 Sedan 5 Series 2003 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW M5 Sedan 5 Series 2003 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.