BMW 530i Sports Wagon 5 Series 2003 Owner's Manual PDF
en
Summary of Content for BMW 530i Sports Wagon 5 Series 2003 Owner's Manual PDF
Owner's Manual for Vehicle
525i 530i 540i
sedan sport wagon
Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:
Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new BMW. The manual contains important data and instructions intended to assist you in obtaining maximum satisfaction from your BMW's unique array of advanced technical fea- tures. It also contains information on vehicle maintenance designed to enhance operating safety while simultaneously helping you to maintain your BMW's value throughout an extended service life. For additional information refer to the supple- mental manuals.
This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information.
We wish you an enjoyable driving experience.
BMW AG
Foreword
Contents
N o
te s
re s
About this Ow Symbols used The individual Status at time For your own Symbol on veh Service and W Reporting safe
Locks and security systems:
e wner's Manual 8 Cockpit 14
C o
n tr
o ls
a n
d f
e at
u Keys 32 Central locking system 32 Opening and closing via the
door lock 33 Opening and closing via the
remote control 34 Opening and closing from the
inside 37 Luggage compartment lid/
Tailgate 38 Rear window 40 Luggage compartment 42 Alarm system 42 Electric power windows 44 Sliding/tilt sunroof 46
Adjustments: Sitting safely 48
memory 54 Seat heating 55 Adjusting steering wheel 56 Steering wheel heating 56 Mirrors 57
Contents
bleached without chlorine, suitable for recycling.
O ve
rv i8
vehicle 8 of printing 9 safety 9 icle parts 10 arranty 10 ty defects 10
Instrument cluster 15 Indicator and warning lamps 19 Steering wheel with multifunction
buttons 22 Warning triangle 23 First-aid kit 23 Refueling 24 Fuel specifications 25 Tire inflation pressure 26
2002 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 156 818 US English IX/2002 Printed in Germany Printed on environmentally friendly paper
5n
w
Cabin convenience:
BMW Universal Transmitter 115
u re
s Passenger safety systems: Airbags 59
Technology for safety and driving convenience:
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Glove compartment 118 Storage compartments 118 Cellular phone 119 Beverage holder 119 Ashtray, front 119 Cigarette lighter 120 Ashtray, rear 120
Loading and transporting cargo: Through-loading system 121 Ski bag 122 sport wagon:
Cargo area 125 Roll-up cover 125 Partition net 125 Storage areas in the luggage compartment 126
Washer/Wiper system/Rain sensor 78
Cruise control 80
Reading lamps 105
Controlling the climate for pleasant driving:
Re pa
irs Da
ta In
de x
Cargo loading 128 Roof-mounted luggage rack 129
C o
n tr
o ls
a n
d f
e at Transporting children safely 62
Vehicle Memory, Key Memory 67
Driving: Steering/Ignition lock 68 Starting the engine 68 Switching off the engine 70 Parking brake 70 Manual transmission 71 Automatic transmission 72 Automatic transmission with
Steptronic 75 Indicator/Headlamp flasher 78
Park Distance Control (PDC) 98 Automatic Stability Control plus
Traction (ASC+T)/Dynamic Stability Control (DSC) 99
Self-leveling suspension 101 Tire Pressure Monitor (RDC) 101
Lamps: Parking lamps/Low beams 103 Instrument lighting 104 High beams/Standing
lamps 104 Fog lamps 104 Interior lamps 105
Everything under control: Odometer, outside temperature
display 82 Tachometer 83 Energy control 83 Fuel gauge 83 Coolant temperature gauge 84 Service Interval Display 84 Check Control 85 Computer 88 Multi-Information Display
(MID) 89 Digital clock in the MID 90 Computer in the MID 93
Air conditioning 106 Automatic climate control 109 Roller sun blind 114 Parked-car ventilation
system 114
Contents
re s
Replacement procedures:
ce Special operating instructions: Under the hood:
O w
n e
r se
rv ic
e p
ro c
e d
u Onboard tool kit 152 Windshield wiper blades 152 Lamps and bulbs 153 Changing a wheel 158 Battery 162 Fuses 162
Assistance, giving and receiving: Jump-starting 164 Towing the vehicle 165
65 Warning 147 OBD interface socket 148
O p
e ra
ti o
n , m
ai n
te n
an
Break-in procedures 132 Driving notes 133 Antilock Brake System 133 Brake system 134
Wheels and tires: Tire inflation pressure 135 Tire condition 135 Tire replacement 136 Wheel and tire
combinations 137 Special characteristics of winter
tires 138 Snow chains 138
Hood 139 Engine compartment
essentials 140 Washer fluids 141 Engine oil 142 Coolant 144 Brake fluid 145
Maintenance: The BMW Maintenance
System 146
Laws and regulations: Technical modifications 147 California Proposition
7n
w
d at
a
n d
e xEngine specifications 170
Dimensions 171 Everything from A to Z 178
Ov er
vi e
Co nt
ro ls
M ai
nt en
an ce
Re pa
irs Da
ta In
de x
T e
c h
n ic
al IWeights 173 Capacities 175
8n
Identifies systems or components, which can be activated or adapted t an individual driver's require- ("Vehicle Memory", "Key ry"). Refer to page 67. tion and adjustments on some of
systems can be performed at MW center.
ndividual vehicle
ying your BMW, you have ed in favor of a model with individ- d equipment and features. This r's Manual describes all models quipment that BMW offers within me group.
Notes
About this Owner's Manual We have made every effort to ensure that you are able to find what you need in this Owner's Manual as quickly as possible. The fastest way to find certain topics is by using the detailed index at the end. If you are looking for a brief initial summary of the essentials, please turn to the first chapter.
Should you wish to sell your BMW at some time in the future, please remember to hand over the Owner's Manual to the new owner; it is an important part of the vehicle.
If you have any questions, your BMW
Symbols used Indicates precautions that must be followed precisely in order to
avoid the possibility of personal injury and serious damage to the vehicle.
Contains information that will assist you in gaining the optimum
benefit from your vehicle and enable you to care more effectively for your vehicle.
Refers to measures that can be taken to help protect the environ-
ment.
pe you will understand that ment and features are included you might not have chosen for ehicle. You can easily identify any nces with the aid of the asterisk *
to identify all optional extras and sories.
r BMW features equipment which described in this Owner's al, Supplementary Owner's als are enclosed. We ask you to hese manuals as well.
center will be glad to advise you. < Marks the end of a specific item of information.
* Indicates special equipment, country- specific equipment and optional extras.
t Identifies index entries that refer to owner service procedures or topics on vehicle maintenance.
Notes Symbols
to sui ments Memo Activa these your B
The i On bu decid ualize Owne and e the sa
We ho equip which your v differe used acces
If you is not Manu Manu read t
9n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Important safety information! For your own safety, use genuine
ts and accessories approved by W. en you purchase accessories tested approved by BMW and Original W Parts, you simultaneously acquire assurance that they have been thor- hly tested by BMW to ensure imum performance when installed our vehicle.
W warrants these parts to be free defects in material and workman- .
W will not accept any liability for ages resulting from installation of
ts and accessories not approved by
Notes
Status at time of printing BMW pursues a policy of continuous, ongoing development designed to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible that the features described in this Owner's Manual could differ from those on your vehicle. Nor can errors and omissions be entirely ruled out. We therefore request your understanding for the fact that we are unable to recognize any legal claims based on the data, illustrations or descriptions in this manual.
For your own safety Use unleaded gasoline only. Fuels containing up to and including
10 % ethanol or other oxygenates with up to 2.8 % oxygen by weight i.e. 15 % MTBE or 3 % methanol plus an equivalent amount of co-solvent will not void the applicable warranties covering defects in materials or work- manship. Field experience has indi- cated significant differences in fuel quality volatility, composition, addi- tives, etc. among gasolines offered for sale in the United States and Canada. The use of poor-quality fuels may result in driveability, starting and stalling problems, especially under certain
Re pa
ir s
Da ta
In de
x
W. W cannot test every product from r manufacturers to verify if it can be
d on a BMW safely and without risk ither the vehicle, its operation, or its upants. inal BMW Parts, BMW Accessories other products approved by BMW, ther with professional advice on g these items, are available from all
W centers.
The individual vehicle
environmental conditions, such as high ambient temperature and high altitude. Should you encounter driveability prob lems that you suspect could be related to the fuel you are using, we recom- mend that you respond by switching to a recognized high-quality brand. Failure to comply with these recom- mendations may result in unscheduled maintenance. Obey pertinent safety rules when you are handling gasoline.<
Status at time of printing
par BM Wh and BM the oug opt on y BM from ship BM dam par
-
BM BM othe use to e occ Orig and toge usin BM
10n
Notes
rting safety defects
llowing only applies to vehicles d and operated in the US.
believe that your vehicle has a t which could cause a crash or cause injury or death, you should diately inform the National ay Traffic Safety Administration A in addition to notifying BMW of America, LLC, P.O. Box 1227, ood, New Jersey 07675-1227,
hone (800) 831-1117.
SA receives similar complaints, it pen an investigation, and if it that a safety defect exists in a
-
Repo The fo owne
If you defec could imme Highw NHTS North Westw Telep
If NHT may o finds
of vehicles, it may order a recall medy campaign. However, A cannot become involved in indi- l problems between you, your r, or BMW of North America, LLC.
ntact NHTSA, you may either call uto Safety Hotline toll-free at -424-9393 or 366-0123 in ington, D.C. area or write to: A, U.S. Department of Transpor- , Washington, D.C. 20590. You lso obtain other information about vehicle safety from the Hotline.
group and re NHTS vidua deale
To co the A 1-800 Wash NHTS tation can a motor
For your own safety
Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones including operation of any portable cellular phone from within the vehicle without using an externally-mounted antenna or trans- ceiver equipment, eg., CBs, walkie- talkie, ham radio or similar accessories, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system, or affect the validity of the BMW Limited Warranty. See your BMW center for additional information.<
Service and Warranty This manual is supplemented by a Ser- vice and Warranty Information Booklet for US models or a Warranty and Ser- vice Guide Booklet for Canadian models.
We recommend that you read this publication thoroughly.
Your BMW is covered by the following warranties: >New Vehicle Limited Warranty >Rust Perforation Limited Warranty >Federal Emissions System Defect
Warranty >Federal Emissions Performance War
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any automotive repair establishment or individual using any certified auto- motive part.<
Symbol on vehicle parts Indicates that you should consult the relevant section of this
Owner's Manual for information on a particular part or assembly.
ranty >California Emissions Control System
Limited Warranty
Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
11n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
12n
13n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Overview
14n
Cockpit
ams 103
s 78
8
3 Fog lamps 104
4 Washer/Wiper system 78
5 Central locking system 32
6 Hazard warning flashers
r window defroster 107, 112
n, the entire surface
usting the steering wheel 56
1 Parking lamps/Low be
2 >Turn signal indicator >Standing lamps 104 >High beams 104 >Headlamp flasher 7 >Computer 88
3 9 0 d
e7 8 8
7 Rea
8 Hor
9 Adj
15n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Instrument cluster
Re pa
ir s
Da ta
In de
x
urn signal
igh beams 21
5 Tachometer and Energy Control
6 Coolant temperature gauge 84
7 Indicator and warning lamps 19 to 21
Selector lever and program display for automatic transmission* 72, 75
Service Interval Display 84
1 Fuel gauge 83
2 Indicator lamp for t indicators 21
3 Speedometer
4 Indicator lamp for h
3 9 0 u s7
4 0
83 8
9
16n
Instrument cluster
uter opera- l lever,
re
mption
11 Indicator lamp for Automatic Sta- bility Control plus Traction (ASC+T) Dynamic Stability Control (DSC)
*
21
12 Indicator lamp for self-leveling suspension
*
21
dometer and trip odometer 82
dicator for Check Control 85
set trip odometer to zero 82
dicator and warning mps 19 to 21
/ 13 O
14 In
15 Re
16 In la
10 Display for the comp tion via the turn signa refer to page 88: >Outside temperatu >Average fuel consu >Cruising range >Average speed
3 9 0 u s7
4 0
17n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Instrument cluster
*
urn signal
4 Indicator lamp for high beams 21
5 Tachometer and Energy Control
6 Coolant temperature gauge 84
Indicator and warning lamps 19 to 21
83
7
Da ta
In de
x
CHECK button 85
Selector lever and program display for automatic transmission* 72, 75
8
9
1 Fuel gauge 83
2 Indicator lamp for t indicators 21
3 Speedometer
3 9 0 u s7
4 1
18n
Instrument cluster
*
display 82
tomatic Sta- ction (ASC+T)/ ntrol
12 Trip odometer 82
13 Check Control display 85
14 Odometer 82
rvice Interval Display 84
set button for trip odometer 82
dicator and warning mps 19 to 21
15 Se
16 Re
17 In la
10 Outside temperature
11 Indicator lamp for Au bility Control plus Tra Dynamic Stability Co (DSC)* 21
3 9 0 u s7
4 1
19n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Indicator and warning lamps
Tire Pressure Monitor (RDC)
*
Accompanied by an acoustic warning signal: a flat tire has
urred. Reduce vehicle speed imme- ely and stop the vehicle. Avoid hard ke applications. Do not oversteer. additional information: refer to e 101
Parking brake
*
/Brake system hydraulic circuits
Comes on when you engage the king brake. additional information: refer to e 70
es on although the parking brake leased: have the brake fluid level cked. Before continuing your ney, be sure to read the notes on es 134 and 145
comes on with the message ECK BRAKE LININGS" in the ck Control.
Parking brake warning lamp
*
/ Brake system hydraulic circuits for Canadian models.
ct
se
n- ve d elt is
- he e p ct:
occ diat bra For pag
par For pag
Com is re che jour pag
Also "CH Che
Da In
de x
<
Technology that monitors itself The system runs a check on the warning and indicator lamps marked by "" each time you switch on the ignition. They each light up once for dif- ferent periods of time.
If a fault should occur in one of these systems, the corresponding lamp does not go out after the engine is started or it lights up while the vehicle is moving. The following section describes how you should respond.
Red: stop immediately Battery charge current The battery is no longer being charged. This indicates a defe
in the alternator drive belt or in the charging circuit of the alternator. Plea contact the nearest BMW center.
You should never attempt to co tinue driving with a defective dri
belt, as the engine could overheat an sustain serious damage. If the drive b is defective, increased steering effort also required.<
Engine oil pressure May be accompanied by the
PRESS" in the Check Control*: stop t vehicle immediately and switch off th engine. Check the engine oil level; to up as required. If the oil level is corre please contact the nearest BMW center.
Do not continue driving, as the engine could sustain serious
damage from inadequate lubrication.
20n
Indicator and warning lamps
Automatic transmission
*
Because of a malfunction, the automatic transmission shifts
n the emergency program. Please lt the nearest BMW center. ditional information: refer to 74 and 77
Brake pads
*
Have the brake pads checked. For additional information: refer
e 134
Dynamic Brake Control (DBC)
*
Malfunction in DBC system. Conventional braking efficiency
ilable without limitations. the system repaired by your BMW r at the earliest possible opportu-
ditional information: refer to 100
Dynamic Brake Control (DBC) warning lamp for Canadian models.
. -
only i consu For ad pages
to pag
is ava Have cente nity. For ad page
Tire Pressure Monitor (RDC)* Check the tire inflation pressure: refer to pages 26, 101
Red: as important reminder Parking brake* Comes on when you engage the parking brake.
For additional information: refer to page 70
Parking brake warning lamp* for Canadian models.
Please fasten safety belts
Accompanied by warning tone and message* in the Check
Control. Remains on until the safety belts are fastened. For additional information on safety
Yellow: please have checked at your earliest opportunity
Antilock Brake System (ABS) ABS has been deactivated in response to system malfunction
Conventional braking efficiency is avail able without limitations. Please have the system inspected by your BMW center. For additional information: refer to page 133
Antilock Brake System (ABS) warning lamp for Canadian models.
Engine oil level*
Airbags
Please have the system inspected by your BMW center.
For additional information: refer to page 59
Comes on while driving: the engine oil level has fallen to the
absolute minimum; refill as soon as possible. Do not drive more than approx. 30 miles (50 km) until you do. For additional information: refer to page 142
Engine oil level* Comes on after the engine has been switched off: add engine
oil at your earliest opportunity (when you stop to refuel). For additional information: refer to page 142
21n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
ta
Indicator and warning lamps
en: for your information Turn signal indicators Flashes when the turn signal indicators are on. Rapid flashing
cates a system malfunction. additional information: refer to e 78
Cruise control Lights up when the system is switched on: available for oper-
n via the multifunction steering el.
additional information: refer to e 80
Front fog lamps Lights up whenever you switch on the front fog lamps.
additional information: refer to e 104
e: for your information High beams Lights up when the high beams are on or the headlamp flasher
ctuated.
n - is-
e
Gre
indi For pag
atio whe For pag
For pag
Blu
is a
Da In
de x
additional information: refer to es 78 and 104
For pag
Self-leveling suspension* The self-leveling suspension system is inactive. Please con-
sult the nearest BMW center. For additional information: refer to page 101
Automatic Stability Control plus Traction (ASC+T)/Dynamic Sta- bility Control (DSC)*
ASC+T/DSC has been deactivated, either manually at the button or auto- matically in response to a system mal- function. In the event of a malfunction, have the system checked by your BMW center. For additional information: refer to page 99
Service Engine Soon If the indicator lamp comes o either continuously or intermit
tently, this indicates a fault in the em sions-related electronic systems. Although the vehicle remains opera- tional, you should have the systems checked by your BMW center at the earliest possible opportunity. For additional information: refer to page 148
Service Engine Soon warning lamp for Canadian models.
Check Filler Cap*
This indicator lamp comes on
Engine electronics* There is a fault in the electronic engine-management system.
You can continue to drive with reduced engine output and engine speed. Please have the system inspected by your BMW center.
when the fuel filler cap is loos or missing. Close the filler cap tightly: refer to page 25
22nSteering wheel with multifunction buttons
e
control: to select a stored set-
control: store and accelerate (+) elerate and store ().
control: activate/interrupt/deac- .
ulated-air mode and automatic ulated-air control (AUC) or ng wheel heating: activate/deacti-
Volum
Cruise ting.
Cruise or dec
Cruise tivate
Recirc recirc steeri vate.
The controls integrated within the multi- function steering wheel (MFL) and the sports steering wheel* have been designed to allow you to operate a number of accessories both quickly and safely, without taking your eyes from the road:
>selected control functions for the radio along with CD and cassette player
> recirculated-air control of the air conditioner system or the steering wheel heating* (MFL only)
> the cruise control >selected phone functions* and >voice entry*.
Switch between phone and radio, cas- sette and CD.
Forward:
>Radio Press briefly: station scan in FM band Extended pressure: search function
>CD Press briefly: track scan Extended pressure: search function in track
>Cassette
The controls are active only when the corresponding systems and
accessories are switched on.<
Press briefly: Receive a phone call, initiate dialing, terminate a call. Extended pressure: Activate/deactivate voice entry.
Press briefly: stop track scan or fast forward Extended pressure: fast forward
>Phone Scan personal phone book.
Reverse: functions as forward.
23n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Warning triangle* First-aid kit*
Some of the items contained in the first-aid kit have a limited ser-
life. For this reason, check the iration dates of each of the items ularly, and replace any whose iration dates have passed. You can uire replacements in any drugstore harmacy. ays observe all legal regulations uiring a first-aid kit to be carried in vehicle.<
e
vice exp reg exp acq or p Alw req the
M Re
pa ir
s Da
ta In
de x
or-
e on
The hazard warning triangle is readily available, stored in the onboard tool kit mounted on the inside of the luggage compartment lid/tailgate. To open the container, loosen the wing
3 9 4 d
e0 5 3
The first-aid kit is located under the front passenger's seat.
To remove: lift the release lever on th front (arrow) and pull the first-aid kit f
3 9 0 d
e7 1 6
screw.
Always observe all legal regula- tions requiring a warning triangle
to be carried in the vehicle.<
ward out of its support.
To store: place the first-aid kit into th support, then push back until the butt engages.
24nRefueling
le and environmentally dly Open the fuel filler cap carefully to prevent fuel from spraying out. pray may cause injury. t top off. Topping off may cause pillage.<
the filler cap in the bracket ed to the fuel filler door.
refueling, insert the filler nozzle letely into the filler pipe. Pulling
,
Simp frien
Fuel s Do no fuel s
Keep attach
When comp
3 9 0 d
e6 0 3
zzle out of the pipe during refu-
ults in premature pump shutoff will reduce the effectiveness of vapor recovery system on the
p.
the no eling
> res >and
the pum
Fuel filler door Always switch off the engine before refueling, as it is not pos-
sible to add fuel with the engine run-
3 9 4 d
e7 2 9
sport wagon
1. Release the right-hand panel in the luggage compartment with the button and fold the panel down
2. Pull the button with the fuel pump symbol.
If a subwoofer* is installed, loosen the T-screw and swing the subwoofer to the side.
Always observe all safety precau- tions posted at the service station
when handling fuel. Never carry spare fuel containers in your vehicle. Whether empty or full, these containers can leak cause an explosion, or lead to fire in the
ning, and attempts may also trigger the Service Engine Soon lamp.<
To open the filler door, press on the front edge.
In the event of an electrical malfunction, you can also open the fuel filler door manually:
sedan
1. Use the handle to lower the trim panel on the right side of the luggage compartment
2. Pull the button with the fuel pump symbol.
event of a collision.<
25n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Refueling Fuel specifications
ld le e
Re pa
ir s
Da ta
In de
x
As long as the filler nozzle is used prop- erly, the fuel tank is full whenever the nozzle shuts off the first time.
Refill early to avoid damaging the catalytic converter; never attempt
to drive to the last drop of fuel in the tank.<
Tank capacity: approx. 18.5 gal. (70 liters), with a reserve capacity of
>BMW 525i, 530i: approx. 2.0 gal. (8 liters)
>BMW 540i: approx. 2.5 gal. (10 liters).
Close the filler cap carefully after refueling until a click is heard.
The engine uses lead-free gasoline only.
Required fuel:
>Premium Unleaded Gasoline, min. 91 AKI AKI = Anti Knock Index
Never use leaded fuel, as it wou cause permanent and irreversib
damage to the oxygen sensor and th catalytic converter.<
While closing, be sure not to squeeze the strap which is fastened to the cap. A loose or missing cap will activate the message "CHECK FILLER CAP" in the Check Control* or the Check Filler Cap lamp*.<
26nTire inflation pressure
ply with tire approval ifications flation pressures in the tables
to BMW approved tire sizes and anufacturers. Your BMW center is ar with these pressures. Higher ures may be specified for tires ther manufacturers.
vehicle is equipped with tires that ly meet US, but also European
ards. We recommend the exclu- se of BMW approved tires.
Com spec The in apply tire m famili press from o
Your not on stand sive u
The inflation pressures are indicated on a sticker attached to the B-pillar behind the driver's door (visible with door open).
3 9 0 d
e6 9 7
Check tire inflation pressures on a regular basis at least twice a
month and before every extended journey. Incorrect tire pressure can lead to driving instability, tire damage and accidents. Check the inflation pressure of the spare tire also. Inflate the spare tire to the highest pressure of any tire on your vehicle.<
Check tire pressures All pressure specifications are indicated in psi (kilopascal) for tires at ambient temperature (refer also to the next pages).
Vehicles with Tire Pressure Monitor (RDC)*: After correcting tire inflation pressures, reactivate the system, refer to page 101.
27n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire inflation pressure
80)
80)
Re pa
ir s
Da ta
In de
x
80)
80)
sedan Tires All pressure specifications in the table are indicated in psi (kilopascal) with cold tires (cold = ambient temperature)
525i
225/60 R 15 96 H M+S 225/55 R 16 95 H M+S 225/60 R 15 96 W 225/55 R 16 95 W 235/45 R 17 94 W/Y 205/65 R 15 94 Q M+S 225/60 R 15 96 Q M+S 225/55 R 16 95 Q M+S 235/45 R 17 94 Q M+S Front: 235/45 R 17 94 W/Y Rear: 255/40 R 17 94 W/Y
29 (200)
33 (230)
33 (230)
33 (230)
41 (2
41 (2 (outside US/CDN)
(US/CDN)
530i
225/55 R 16 95 H M+S 225/55 R 16 95 W 235/45 R 17 94 W/Y 225/55 R 16 95 Q M+S 235/45 R 17 94 Q M+S Front: 235/45 R 17 94 W/Y Rear: 255/40 R 17 94 W/Y
29 (200)
33 (230)
33 (230)
33 (230)
41 (2
41 (2 (outside US/CDN)
(US/CDN)
28nTire inflation pressure
R 17 94 Q M+S 35/45 R 17 94 W/Y 55/40 R 17 94 W/Y
30 (210)
35 (240)
36 (250)
44 (30
0)
0)
0)
0)
0)
sedan Tires All pressure specifications in the table are indicated in psi (kilopascal) with cold tires (cold = ambient temperature)
540i
225/55 R 16 95 W 235/45 R 17 94 W/Y
35 (240) 39 (270) 41 (280) 48 (33
Front: 235/45 R 17 94 W/Y Rear: 255/40 R 17 94 W/Y
35 (240)
39 (270)
41 (280)
48 (33
225/55 R 16 95 Q/T/H M+S 235/45 R 17 94 Q/T/H M+S
30 (210) 35 (240) 36 (250) 44 (30
540iA
225/55 R 16 95 H M+S 225/55 R 16 95 W 235/45 R 17 94 W/Y 225/55 R 16 95 Q M+S
30 (210) 35 (240) 36 (250) 44 (30
235/45 Front: 2 Rear: 2
29n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire inflation pressure
/Y M+S M+S
33 (230) 38 (260) 39 (270) 46 (3
00)
20)
00)
Re pa
ir s
Da ta
In de
x
20)
sport wagon
Tires All pressure specifications in the table are indicated in psi (kilopascal) with cold tires (cold = ambient temperature)
525i
225/55 R 16 95 H M+S 225/60 R 15 96 H M+S 225/60 R 15 96 W 225/55 R 16 95 W 235/45 R 17 94 W/Y
30 (210) 35 (240) 36 (250) 44 (3
225/60 R 15 96 Q M+S 225/55 R 16 95 Q M+S 235/45 R 17 94 Q M+S
33 (230) 38 (260) 39 (270) 46 (3
225/55 R 16 95 H M+S 225/55 R 16 95 W 30 (210) 35 (240) 36 (250) 44 (3
540i 235/45 R 17 94 W 225/55 R 16 95 Q 235/45 R 17 94 Q
30n
Controls
31n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
32nKeys Central locking system
oncept entral locking system is ready for tion as soon as you close the front . The system engages and es the locks on the
rs age compartment lid/tailgate rear window*
l filler door.
entral locking system can be ted
outside via the driver's door lock ell as via the remote control inside via the central locking
tem button.
,
The c The c opera doors releas
>doo > lugg
and > fue
The c opera
> from as w
> from sys
tion from inside does not lock the ller door (refer to page 37). Activa- om outside simultaneously acti- the anti-theft system. The alarm
is also armed or disarmed.
you use the central locking to lock the doors from inside
hicle, it will automatically disen- the locks if an accident occurs, t on doors that have been locked ually using the lock buttons, refer e 37. The accident response rou-
lso includes automatic activation hazard warning flashers and the r lamps.
Activa fuel fi tion fr vates system
When system the ve gage excep individ to pag tine a of the interio
1 Master keys with remote control unit determine the functions of the Key Memory, refer to page 67. You can mark individual keys for sub-
4 6 3 d
e0 2 3
2 Spare key for storage in a safe place such as in your wallet. This key is not intended for continuous use
3 Door and ignition key The locks for the luggage compart- ment lid/tailgate, rear backrest and glove compartment cannot be oper- ated with this key. This is recom- mended for valet parking, for instance.
sequent identification by applying the colored decals that you received when accepting delivery of your vehicle
There is an extended-life battery in every master key that is
charged automatically in the ignition lock as you drive. For this reason, if you have a master key that is not in regular use, you should use that key approx. once every year while driving for an extended period. This will charge the battery. Refer also to page 34.<
33n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Opening and closing via the door lock
d
d
-
on
ht
In de
x
Using the key One turn of the key in the driver's door lock unlocks the driver's door only. Turning the key a second time unlocks
3 9 0 d
e7 2 3
Convenience operation You can also operate the windows an sliding/tilt sunroof via the door lock.
>To open: with the door closed, turn the key to the "Unlock" position an hold it
>To close: with the door closed, turn the key to the "Lock" position and hold it.
Watch the closing process care fully and be sure that no one is
trapped by the closing motion. The closing process stops immediately when you release the key.<
all of the remaining doors, the luggage compartment lid/tailgate and the fuel filler door.
You can have a signal set to con- firm that the vehicle's locks have
engaged securely.<
Manual operation in the event of an electrical malfuncti
Turn the key to the extreme left or rig to unlock/lock the driver's door.
34nOpening and closing via the remote control
er keys with remote control Since passengers or animals remaining in the vehicle might be o lock the doors from the inside, he vehicle's keys with you so that hicle can be opened again from tside at any time.<
Master keys that are used repeat- edly are always ready for opera- ince the battery in the key is ed automatically in the ignition s you drive. no longer possible to lock the le via the remote control, the y is discharged. Use this key driving for an extended period in to charge the battery. Refer also e 32. vent unauthorized use of the
e control, surrender only the door nition key 3 or the spare key 2 to page 32) when leaving the le for valet parking, for example. event of a system malfunction, e contact your BMW center. You lso obtain replacement keys <
-
Mast
able t take t the ve the ou
tion, s charg lock a If it is vehic batter while order to pag To pre remot and ig (refer vehic In the pleas can a there.
The concept The remote control makes opening and locking the doors of your vehicle very convenient. Furthermore, it provides three additional functions which you can only execute via the remote control:
>To switch on interior lamps, refer to page 35. With this function, you can also "search for" your vehicle, when parked in an underground garage, for instance
>To open the luggage compartment lid/tailgate, refer to page 35. The luggage compartment lid/tailgate will open slightly, regardless of
1 Unlock, convenience opening and alarm system
2 Lock and secure, interior lamp activa tion, disarming tilt alarm sensor and
3 9 0 d
e7 9 3
whether it was previously locked or unlocked
>Panic mode In case of danger, you can trigger the alarm.
Whenever you unlock (lock) the vehicle, you simultaneously deactivate (activate) the anti-theft system, disarm (arm) the alarm system and switch the interior lamps on (off).
You can have a signal set to con- firm that the vehicle's locks have
engaged securely.<
interior motion sensor
3 Open the luggage compartment lid/ tailgate, panic mode
35n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Opening and closing via the remote control
open the luggage partment lid/tailgate
ss button.
luggage compartment lid/tailgate open slightly, regardless of whether as previously locked or unlocked.
Before and after a trip, be sure that the luggage compartment lid/
ate has not been opened uninten- ally.<
ic mode
vided that the alarm system is ed, you can respond to imminent ger by holding down the button for een two and five seconds.
ancel alarm
ss button.
:
s)
or
.
To com
Pre
The will it w
tailg tion
Pan
Pro arm dan betw
To c
Pre
In de
x
To unlock
Press button.
Press the button once to unlock the driver's door and the fuel filler door only; press a second time to unlock all remaining doors as well as the luggage compartment lid/tailgate.
Convenience opening mode
Press and hold button to open the elec- tric power windows and sliding/tilt sun- roof.
To lock and secure
Press button.
Vehicles without armored glass do not lock the vehicle if anyone
will be remaining inside, as it would then be impossible for the occupant( to disengage the locks from the inside.<
To deactivate the tilt alarm sens and interior motion sensor
Press button a second time immedi-
To switch on the interior lamps
With the vehicle locked, press button
36nOpening and closing via the remote control
l
External systems The remote control system may be affected by other units or equipment operating in the immediate vicinity of your vehicle. If this should occur, you can unlock and lock the vehicle via the door lock with a master key.
For US owners only The transmitter and receiver units comply with part 15 of the FCC (Federa Communication Commission) regula- tions. Operation is governed by the following:
FCC ID: LX8EWS LX8FZVS LX8FZVE
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
>This device may not cause harmful interference, and
> this device must accept any interfer- ence received, including interference that may cause undesired operation.
Any unauthorized modifications to these devices could void the
user's authority to operate the equip- ment.<
37n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Opening and closing from the inside
engage the locks se the central locking button to lock ll of the doors simultaneously, r ress down the individual door lock uttons. As an added design feature prevent the driver from being inad-
ertently locked out of the vehicle, e driver's door lock button will not
ngage as long as the door is open.
When the vehicle is moving, you should not lock the doors with
r lock buttons since doors locked in manner would not open automati- y in the event of an accident. e passengers or animals remaining e vehicle might be able to lock the rs from the inside, take the vehicle's s with you so that the vehicle can be ned again from the outside at any .<
rt-
if
in
ith
le
or r,
To >U
a o
>p b to v th e
thei this call Sinc in th doo key ope time
In de
x
You can operate the central locking system with this button when the driver's door is closed. With this button, only the doors, the luggage compart- ment lid/tailgate and rear window are
3 9 0 d
e6 9 1
If only the driver's door was unlocked from the outside and
you press the button >all other doors, the luggage compa
ment lid/tailgate, rear window and the fuel filler door will be unlocked the driver's door is open
> the driver's door will be locked aga when it is closed.<
To unlock and open the doors >Either unlock the doors together w
the button for the central locking system and then pull the door hand above the armrest or
>pull the release handle for each do twice: the first pull unlocks the doo
unlocked or locked. The anti-theft system is not activated. Also, the fuel filler door remains unlocked to allow refueling.
The central locking system can be locked automatically as soon as
you begin to drive if you desire. You may also have this function pro- grammed into individual keys.<
and the second one opens it.
38nLuggage compartment lid/Tailgate
al operation event of an electrical malfunction, an also open the luggage com- ent lid/tailgate manually:
: he master key to the left in the ge compartment lock, continuing way to the end of its travel the ge compartment lid will open ly.
ggage compartment is locked as soon as you close the lid.
Manu In the you c partm
sedan Turn t lugga all the lugga slight
The lu again
Only the master keys (refer to page 32) fit in the lock of the luggage compart- ment lid.
3 9 4 d
e7 8 3
Secure separately Turn the master key to the right past the pressure point and then pull it out in the horizontal position.
3 9 4 d
e7 3 1
Opening separately Turn the master key to the left in the luggage compartment lock, continuing until it stops the luggage compart- ment lid will open slightly.
The luggage compartment is locked again as soon as you close the lid.
This locks the luggage compartment lid and disconnects it from the central locking system. This feature can be used to prevent unauthorized access to the luggage compartment when you hand over the door and ignition key (refer to page 32) for valet parking, etc.
39n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Luggage compartment lid/Tailgate
open from the outside ss the button (arrow): the luggage partment lid/tailgate opens slightly.
luggage compartment (cargo area) luminated whenever the luggage partment lid/tailgate is opened (for itional information refer to e 105).
d e
r
To Pre com
The is il com add pag
3 9 4 d
e7 2 8
Da ta
In de
x
sport wagon: 1. From inside the luggage compart-
ment, open the two side covers (arrow). Remove the covers
3 9 2 d
e7 7 8
2. Release the two quick-release fas- teners of the cover for the onboard tool kit in the tailgate. Raise the cover
3. Remove the plastic plug (arrow) an 3 9 2 d
e7 7 6
pull toward the interior. The tailgat will be released
4. Open the tailgate. Press the plug back into place and close the cove with the quick-release fasteners
5. Position the two side covers and close them.
40nLuggage compartment lid/Tailgate
ng sedan andle recess (arrow) next to the echanism is designed to assist closing the luggage compart- lid.
Closi The h lock m you in ment
3 9 4 d
e1 2 8
To open from the inside You can use this button to open the luggage compartment lid/tailgate when the vehicle is stationary (not possible if
3 9 0 d
e6 9 2
Rear window sport wagon Small items can be loaded or unloaded quickly if the rear window is opened separately.
3 9 2 d
e7 2 7
the tailgate has been locked sepa- rately).
When the tailgate of the sport wagon is opened, the clearance
from the ground to the upper edge is more than 6.6 ft (two meters). Please keep this in mind when opening the tail- gate (in a garage, for example).<
For the roll-up covers and for additional details concerning the luggage com- partment, please refer to "Luggage compartment" beginning on page 125.
Press the button (arrow): the rear window opens slightly. It can now be tilted up.
Push the window down to close it.
When loading sharp or pointed objects in the area adjacent to the
rear window always wrap their edges in soft material if there is any chance that these objects could shift and rub against the window while the vehicle is underway. Failure to observe this pre- caution can result in damage to the rear window defroster's resistor elements.<
41n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Luggage compartment lid/Tailgate
ergency release sedan only lever releases the luggage com-
tment lid from the luggage compart- t's interior.
e
s ns
g- r
e
t
/ Em This par men
3 9 0 d
e7 9 2
Da ta
In de
x
Closing sport wagon You can pull the tailgate down by placing both hands in the handle recesses (arrows).
3 9 2 d
e6 8 9
To avoid injuries, be sure that th travel path of the luggage com-
partment lid/tailgate is clear when it i closed, observing the same precautio as with all closing procedures. Operate the vehicle only when the lu gage compartment lid/tailgate or rea window is completely closed. Other- wise, exhaust fumes could penetrate the interior of the vehicle. Should it b absolutely necessary to operate the vehicle with the luggage compartmen lid/tailgate or rear window open: >Close all windows. Shut the sliding
tilt sunroof > Increase the air supply for the air
conditioner or automatic climate
control to a high level. Refer to page 107 or 111.<
42nLuggage compartment Alarm system
oncept ehicle alarm system responds
n a door, the hood, the luggage partment lid/tailgate or the rear
dow is opened ovement inside the vehicle (inte-
motion sensor) ariations in the vehicle's tilt angle h as those occurring during mpts to steal the wheels or tow
vehicle nterruption of battery voltage.
ystem responds to unauthorized le entry and attempted theft by aneously activating the following
The c The v
>whe com win
> to m rior
> to v suc atte the
> to i
The s vehic simult
acoustic alarm for 30 seconds hazard warning flashers, for rox. five minutes
high beams flash on and off in the e rhythm as the hazard warning
hers.
>an > the
app > the
sam flas
Luggage straps Use the straps on the floor of the luggage compartment to secure smaller items of luggage.
3 9 4 d
e3 0 2
Hanger On the left-hand side of the luggage compartment is a hanger for fastening shopping bags, packages and similar
3 9 4 d
e1 4 4
Movement is reduced when objects are placed on the straps.
The lashing eyes at the corners of the luggage compartment provide you with a convenient means of attaching luggage nets* and flexible straps for securing suitcases and luggage.
Refer also to "Cargo loading" on page 128.
items.
43n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Alarm system
the indicator lamp flashes for 0 seconds when the system is isarmed: an attempted entry has een detected in the period since the ystem was armed.
owing triggering of an alarm, the cator lamp will flash continuously.
iding unintentional alarms tilt alarm sensor and interior motion sor may be switched off at the same . To prevent an unintentional alarm being triggered (in garages with ator ramps, for instance), or when vehicle is transported by trailer or :
or ly:
> If 1 d b s
Foll indi
Avo The sen time from elev the train
Re pa
ir s
Da ta
In de
x
k the vehicle (arm the alarm system) e in succession: press button 2 on remote control twice (refer to e 35), or turn the key in the door to the right (lock) twice in succes- (refer to page 33). indicator lamp lights up briefly and flashes continuously. The tilt alarm
sor and the interior motion sensor deactivated as long as the system is ed.
e
ot m
es -
ot
la-
he
Loc twic the pag lock sion The then sen are arm
To arm and disarm the alarm system When the vehicle is locked or unlocked with the key or the remote control, the alarm system is also simultaneously armed or disarmed.
You can have different acknowl- edgment signals set to confirm
arming and disarming.<
You can also open the luggage com- partment lid/tailgate when the system is armed by pressing the button on the
Indicator lamp displays >The indicator lamp below the interi
rearview mirror flashes continuous the system is armed
3 9 0 d
e0 2 0
remote control (refer to page 35). When you close the luggage compartment lid/ tailgate, the luggage compartment is secured again.
>The indicator lamp flashes during arming: door(s), the hood or luggag compartment lid/tailgate are not completely closed. Even if you do n secure the indicated area, the syste begins to monitor the remaining areas, and the indicator lamp flash continuously after 10 seconds. How ever, the interior motion sensor is n activated
> If the indicator lamp goes out when the system is disarmed: no manipu tion or attempted intrusions have been detected in the period since t system was armed
44nAlarm system Electric power windows
the ignition has been switched off:
can still operate the windows as as neither of the front doors has n opened. To open the window, ss the switch beyond the pressure nt.
When leaving the vehicle, always extract the ignition key from the nd remember to close the doors vent children from operating the r windows and injuring them- , etc.<
e convenience mode via the door r the remote control, refer to
After
>You long bee pre poi
lock a to pre powe selves
For th lock o
33 or 35.
y feature tact strip is integrated into the side of each of the upper window sections. If pressure is exerted st this contact strip while a w is being raised, the system will nd by stopping the window and etracting it a small distance.
pages
Safet A con inner frame again windo respo then r
Interior motion sensor In order for the interior motion sensor to function properly, the windows and sliding/tilt sunroof must be completely closed.
Nevertheless, you should deactivate the interior motion sensor (refer to "Avoiding unintentional alarms") if you
> leave children or animals in the vehicle
> intend to leave the windows or sliding/tilt sunroof open. To open and close windows
From ignition key position 1:
>Depress the rocker switch until you
3 9 0 d
e0 5 5
feel resistance: The window continues moving for as long as you maintain pressure on the switch
>Press the rocker switch beyond the pressure point: The window moves automatically. Press the switch a second time to stop the window.
45n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Electric power windows
nt or
Re pa
ir s
Da ta
In de
x
).
er r
Despite this safety feature, be extremely careful that the closing
path of the window is not obstructed. Otherwise, an object might not touch the contact strip in some situations (very thin objects, for instance). You can override this safety feature by pressing the switch beyond the pres- sure point and holding it. Because the power windows are sealed at high pressure to prevent wind noise when closed, a powerful motor is required for efficient closing. When closing the windows, always ensure that they are not obstructed in any way. Unsupervised use of these systems can result in serious personal injury.
Safety switch With the safety switch, you can preve the rear windows from being opened closed via the switch in the rear pas-
3 9 0 d
e6 9 3
Remove the ignition key to deactivate the electric power windows whenever you leave the vehicle. Never leave the keys in the vehicle with unsupervised children. Never place anything that could obstruct the driver's vision on or next to the windows.<
senger area (by children, for example
Press the safety switch whenev children are riding in the rear of
the vehicle. Careless use of the powe windows can lead to injury.<
46nSliding/tilt sunroof*
matic* opening and closing the switch past the pressure and then release it.
automatic operations are:
h the sunroof open, press the tch briefly toward "Lift:" the sun- f automatically extends to its fully- ed position h the sunroof lifted, press the tch briefly toward "Open:" the roof automatically opens all the .
ing the switch again briefly stops otion.
Auto Press point
Other
>Wit swi roo rais
>Wit swi sun way
Press the m
y feature sliding/tilt sunroof encounters ance at a point roughly past the e of its travel when it is closing, osing cycle is interrupted and the /tilt sunroof will open again
ly.
, -
Safet If the resist middl the cl sliding slight
To prevent injuries, exercise care when closing the sliding/tilt sun-
roof and keep it in your field of vision until it is shut. Before leaving the vehicle, switch off the electric sunroof mechanism by removing the ignition key. Do not leave children unattended in the vehicle with access to vehicle keys. The key could be used to start the engine and operate vehicle systems such as the power sun- roof, etc. Unsupervised use of these systems can result in serious personal injury.<
For the convenience mode via the door
Raising Opening Closing From ignition key position 1 on, press the switch or slide it in the desired direction until you feel resistance.
3 9 0 d
e7 2 4
lock or the remote control, refer to page 33 or 35. When lifting, the headliner retracts sev-
eral inches.
The headliner insert can not be closed with the sunroof in its
raised position.<
After the ignition has been switched off you can still operate the sliding/tilt sun roof as long as neither of the front doors has been opened.
47n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Sliding/tilt sunroof*
nual operation e event of an electrical malfunction,
can also operate the sliding/tilt roof manually:
Ma In th you sun
3 9 0 d
e3 7 6
Re pa
ir s
Da ta
In de
x
emove the interior lamp, then reach to the exposed opening and press ut the cover se the Allen key from the onboard ol kit (refer to page 152) to turn the
liding/tilt sunroof in the desired irection.
y :
x.
1. R in o
2. U to s d
Despite this safety feature, be extremely careful that the travel
path of the sunroof is not obstructed whenever it is closed. Remember that the safety mechanism may not be able to detect obstructions under all circum- stances (with very thin objects, for instance). You can disable this safety feature by pressing the switch beyond the pressure point and holding it.<
Sliding/tilt sunroof with glass moonroof* The options and control procedures are essentially the same as those previ- ously described for the sliding/tilt sun- roof. In order to open the raised roof,
Interruption in the electrical supply After interruptions in the electrical supply (when the battery is discon-
3 9 0 d
e7 2 5
press the control switch towards "Open" and maintain pressure until the roof has reached the desired position. The headliner insert slides back some- what when you raise the sunroof, and retracts along with the sunroof panel when you slide it back. The insert then remains open, and you can slide it back and forth to adjust it whenever the sun- roof is not fully retracted.
nected, for instance), the sunroof ma only lift. To reinitialize the mechanism
1. Raise the sliding/tilt sunroof fully 2. Press and hold the switch for appro
twenty seconds.
48n
adjusting your seat, always rve the following precautions Never try to adjust your seat while operating the vehicle. The seat respond with an unexpected ment, and the ensuing loss of le control could lead to an acci- Never ride with the backrest ed to an extreme horizontal angle rtant for front passengers to
ber), otherwise, there is a risk ou will slide under the safety belt accident, thus negating the pro- n the safety belt provides. t move the seats to the rear when hicle is at an extreme angle (on
Sitting safely Seats
For relaxed and fatigue-free driving you should select a seating position that reflects your personal requirements. Correct seating position combines with safety belts and airbags to enhance occupant safety in the event of an acci- dent. To ensure that the vehicle's safety systems provide you with optimal pro- tection, we request that you direct your careful attention to the following sec- tion.
For additional information on trans- porting children, refer to page 62.
Sitting safely with airbags Always maintain an adequate dis-
Sitting safely with safety belt Never allow more than one person to wear a single safety belt. Never
allow infants or small children to ride in a passenger's lap. Avoid twisting the belt while routing it firmly across the pelvis and shoulder, wear it as snugly against your body as possible. Do not allow the belt to rest against hard or fragile objects in your pockets. Do not route the belt across your neck, or run it across sharp edges. Avoid wearing bulky clothing and pull on the lap belt periodically to retention it over your shoulders. In the event of a frontal impact, a loose lap belt could slide over
e ramps or steep slopes, for ple). If you do so, the automatic belt height adjustment can be gaged.<
adjustment nually-adjusted seat, refer to e 49
ctric power seats, refer to page 50 d restraints, refer to page 52 W active seat, refer to page 52
tance between yourself and the airbags. Always hold the steering wheel by the rim to keep any chance of injury to hands or arms to an absolute min- imum should the airbag be deployed. Never allow any objects, individuals or animals to obstruct the areas between passengers and airbags. Never use the front airbag's cover as a storage tray or support for objects of any kind. Never allow front passengers to rest their feet or legs on the airbag cover.<
For airbag locations and additional information on airbags refer to page 59.
the hips, leading to abdominal injury. In addition, the safety belt's restraint effectiveness is reduced if it is worn loosely. Expectant mothers should always wear their safety belts, taking care to position the lap belt against the lower hips, where it will not exert pres- sure against the abdominal area.<
For information on using the safety belts refer to page 53.
When obse
could move vehic dent. reclin (impo remem that y in an tectio Do no the ve
Seat >Ma
pag >Ele >Hea >BM
49n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Manually-adjusted seat
r s
Re pa
ir s
Da ta
In de
x
to
Seat adjustment 1 Backward/forward adjustment
Pull the lever and slide the seat to the desired position.
3 9 0 u s7
3 1
3 Backrest angle Pull the lever and apply weight to o remove weight from the backrest a required.
3 9 0 u s7
3 2
After you release the lever, move the seat forward or backward slightly to engage the detent
2 Cushion height Pull the lever and apply weight to or remove weight from the seat as required
Comply with the adjustment instructions on page 48. Failure
do so could result in diminished per- sonal safety.<
50nElectric power seats*
sting BMW comfort seat* eat allows you to make additional tments for
Adju This s adjus
3 8 0 d
e0 2 4
bar support
ulder support
ar support:
an adjust the backrest's contour ditional support in the curvature r spine's lumbar region.
pper hips and spinal column e supplementary support to help aintain a relaxed, upright seating
on.
1 Lum
2 Sho
Lumb
You c for ad of you
The u receiv you m positi
1 Tilt angle (driver's seat only)
2 Backward/forward adjustment
3 Cushion height
3 8 0 d
e0 2 3
Adjusting BMW sports seat* With this seat, you can also adjust the thigh support:
3 9 0 d
e6 9 6
4 Backrest angle
5 Head restraint height
To adjust the angle of the head restraint manually, tilt to the desired angle.
Read and comply with the adjust- ment instructions on page 48.
Failure to do so could result in dimin- ished personal safety.<
Press the front/rear of the switch to adjust the thigh support for your max- imum personal comfort.
51n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Electric power seats*
nt passenger's seat adjusted for xed traveling:
djust the upper backrest section its extreme rear position
ower the backrest slightly to crease the tilt angle ring the upper backrest section rward until your shoulders enjoy
rm support.
Make corrections in the forward/ backward adjustment of the seat
nsure that the safety belt still fits ly against your body. Failure to erve this precaution can reduce the unt of protection provided by your ty belt.<
Fro rela
1. A to
2. L in
3 B fo fi
to e firm obs amo safe
Re pa
ir s
Da ta
In de
x
ck-
s.
rt
to
>Press the front/rear of the switch: Increase/decrease curvature
>Press the upper/lower end of the switch: Increase the upper/lower curvature.
Shoulder support:
Press the front/rear of the switch: the support angle of the upper backrest section is adjusted.
5 3 0 d
e2 5 2
You can use the adjustable upper ba rest for supplementary support in the shoulder region. This provides a relaxed seating position and helps relieve stress on the shoulder muscle
To obtain the optimal shoulder suppo position, we recommend:
Driver and front passenger:
1. Adjust the upper backrest section its extreme rear position
2 Adjust for the optimal seating posi- tion as described on page 48
3. Bring the upper backrest section forward until your shoulders enjoy firm support.
52nHead restraints BMW active seat*
changes in the seat's cushion o avoid muscle cramps, pain in ine's lumbar region and fatigue.
tivate, press the button.
Active help t the sp
To ac
3 9 0 u s7
2 5
Adjusting To adjust the height of the front or rear head restraints, pull up or push down. For electric height adjustment, refer to
3 9 0 d
e7 1 5
Head restraints reduce the risk of spinal injury in the event of an
accident. Adjust the head restraint so that its center is approximately level with your ears. Leave the center-rear head restraint in the fully-lowered position at all times. Extending it limits its function.<
page 50.
To adjust the angle of the front head restraints, tilt to the desired angle.
53n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Safety belts
lly
rd ly
e. or
is
Re pa
ir s
Da ta
In de
x
n ed : ue s
e
Drive with your safety belt on Always fasten your safety belt before starting off. As supplemental restraint devices, the airbags are designed to
3 9 0 d
e6 5 3
The shoulder belt anchor automatica adjusts to continue providing an optimum fit when you move the seat forward or back.
The rear belt buckle with the wo "CENTER" is intended exclusive
for the passenger sitting in the middl sedan with through-loading system*: please comply with the instructions f the center safety belt on page 121. sport wagon: if it is not possible to extract the center belt, this indicates that the detent for the larger backrest not securely engaged, refer to page 125.<
enhance the effectiveness of the safety belts, and not to replace them.
To close Make sure you hear the catch engage in the belt buckle.
To open 1. Press the red button in the belt
buckle 2. Hold the end of the belt 3. Guide the belt back into the inertia
reel.
If the safety belt system has bee subjected to the stresses involv
in an accident or otherwise damaged to ensure that the safety belts contin to provide effective protection, alway have the entire safety belt mechanism replaced and the belt anchorages inspected at your BMW center. If a child-restraint system was in the vehicle during an accident, consult th manufacturer's instructions regarding replacement.c
54nSeat, mirror and steering wheel memory
lect a stored setting nience function:
n the driver's door after cking the vehicle or turn the igni- key to position 1 fly press memory button 1, 2 or 3, esired.
vement stops immediately when of the seat-adjustment or
mory buttons is activated during adjustment process.
function:
h the driver's door closed and the tion key either removed or in posi- 0 or 2
intain pressure on the desired mory button (1, 2 or 3) until the stment process is completed.
press the MEMORY button entally: press the button a second the indicator lamp goes out.
Do not select a new stored memory setting while the vehicle ving. There is a risk of accident
To se Conve
1 Ope unlo tion
2 Brie as d Mo one me the
Safety
1 Wit igni tion
2 Ma me adju
If you accid time;
is mo
ering wheel.<
You can store and call up three different seat, exterior mirror and steering wheel positions. The illustration shows the buttons on the driver's door for making
3 9 0 d
e0 3 2
To store 1 Turn the ignition key to position 1 or 2 2 Adjust to the desired positions for the
seat, exterior mirror and steering wheel
3 Press the MEMORY button: the indi- cator lamp in the button comes on
4 Press memory button 1, 2 or 3, as desired: the indicator lamp goes out.
these position adjustments.
The adjustment of the lumbar support is not stored in the memory.
55n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Seat, mirror and steering wheel memory Seat heating*
seat cushion and backrest can be ted with the ignition key in ition 2.
can select from different heating es by repeatedly pressing the on.
can also switch the higher heating es off directly:
ss the button and hold it slightly er.
ilt
-
," n- e
-
The hea pos
You mod butt
You mod Pre long
3 9 0 u s7
2 9
In de
x
Your BMW center can adjust your vehicle's systems in such a
manner that your personalized settings are automatically called up for the seat, mirror and steering wheel positions when you unlock the vehicle with your personal remote control key.<
Before using the key memory fea- ture to unlock the vehicle always
ensure that no objects are stored in the footwell behind the driver's seat. If you fail to do so, persons or objects could be injured or damaged if the seat should move backward.<
Passenger-side exterior mirror t function (automatic curb monitor)
1 Move the mirror selector switch
3 9 0 d
e7 2 0
(arrow) to the "driver's mirror" posi tion
2 When the gearshift lever or the selector lever is placed in "Reverse the passenger-side mirror tilts dow ward to help the driver monitor the area directly adjacent to the vehicl during parking (curbs, etc.).
You can deactivate this automatic fea ture by setting the mirror selector switch to the "passenger-side" posi- tion.
56nAdjusting steering wheel Steering wheel heating*
teering wheel heating feature is ble for operation when the ignition in position 2.
the button to switch on and off.
)
The s availa key is
Press
3 9 0 d
e7 0 8
mp within the button lights up the steering wheel heating is in tion.
have a multifunction steering l without steering wheel heating, tton for the recirculated-air mode
his location (refer to page 22).
The la when opera
If you whee the bu is in t
The steering wheel can be moved in any of four directions. Adjust by moving the control lever in the desired direc- tion.
3 9 0 d
e7 1 1
Automatic steering wheel adjustment In order to make it easier to get into and out of the vehicle, the steering wheel automatically moves into the top posi- tion and returns to the driving (memory position.
This automatic feature is controlled by the position of the ignition key and by the driver's door.
Do not adjust the steering wheel while the vehicle is moving. There
is a risk of accident from unexpected movement.<
To store the steering wheel setting, refer to "Seat, mirror and steering wheel memory" on page 54.
57n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Mirrors
rior rearview mirror educe glare from vehicles behind after dark, tilt the mirror by moving small lever.
f e er
Inte To r you the
3 9 0 d
e7 1 3
Re pa
ir s
Da ta
In de
x
Exterior mirrors 1 Mirror switch for 4-way adjustment
2 Left/right selection switch
3 9 0 u s7
3 3
Convex mirror The passenger-side mirror fea- tures a convex lens. When esti-
mating the distance between yoursel and other traffic, bear in mind that th objects reflected in the mirror are clos than they appear.<
Self-defrosting mirrors Both mirrors are defrosted automati- cally when the ignition key is in position 2.
To adjust manually The mirrors can also be adjusted manu- ally: Press the edge of the lens.
To store mirror settings, refer to "Seat, mirror and steering wheel memory" on page 54.
58nMirrors
Interior and exterior mirrors with automatic dimming feature* These mirrors automatically respond to glare from following vehicles by dim-
3 9 0 d
e0 3 1
ming through an infinitely-variable range. The mirrors automatically revert to their clear, undimmed setting when- ever you select reverse.
The dimming function is regulated by two photocells; one is integrated in the mirror's lens (arrow), while the other is located at an offset position on the rear of the mirror.
To ensure that the mirror continues to operate efficiently, ensure that the pho- tocells remain clear and unobstructed. Refrain from attaching stickers to the windshield in the area immediately in front of the mirror.
59n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Airbags
- y r W if
g
in
Re pa
ir s
Da ta
In de
x
1 Front airbags on the driver and passenger sides
2 Head protection airbags on driver and passenger side (front and rear*)
3 8 0 d
e6 4 3
The side airbags in the rear pas senger area* of your vehicle ma
already have been deactivated, eithe at the time of manufacture or by a BM center. You may have them activated you desire to do so. Please contact your BMW center for additional infor- mation.c
For information on the correct seatin position, refer to page 48.
The airbags will not be triggered the event of a minor accident, a
vehicle rollover or a collision from the rear.<
3 Side airbags on driver and passenger side (front and rear*)
Protective effect The front airbags protect the driver and passenger in the event of a head-on collision where the protection provided by the safety belt alone would not be adequate. The head protection airbags and side airbags help provide protec- tion in the event of a collision from the side. Each of the side airbags is designed to help support the upper body.
60nAirbags
eat side airbags, if provided, be ivated if you plan to transport chil- n the rear seat. ar-seat side airbags may already
been deactivated, either at the f manufacture or by a BMW
r. Labels in the rear door opening d indicate the status of your rear- ide airbags. If you are uncertain of tatus, or wish to have the airbags ted or deactivated, please con- our BMW center.<
when all these guidelines are fol- , there is still a small residual risk ries to the face, hands and arms
rear-s deact dren i The re have time o cente shoul seat s their s activa tact y
Even lowed of inju
ring in isolated instances. nition and inflation noise may ke a mild temporary hearing loss remely sensitive individuals.
warning information is also pro- on the sun visors.
occur The ig provo in ext
Airbag vided
Never apply stickers or adhesive- backed objects of any kind to the
airbag covers. Never attempt to reup- holster the covers or modify them in any way. If the airbags deploy in response to an accident, if you note any signs of system malfunction, or if you wish to have any parts of the airbag passenger- restraint system deactivated, always contact your BMW center, to whom we strongly urge you to entrust all testing, repair and dismantling operations. Never attempt to modify or tamper with either the system's electrical wiring or any of its individual components. System components include the uphol-
airbags deploy in response to an acci- dent, always remember to avoid all contact with system components, as they are hot and can cause burns in the period immediately following deploy- ment.<
All vehicle occupants should always sit upright and be properly
restrained (infants and small children in appropriate child-restraint systems; larger children and adults using the safety belts). Never let an occupant's head rest near or on a side airbag: the inflating airbag could cause a serious or fatal injury. Please note that the word
stered surfaces on the steering wheel, instrument panel, the trim panels on the front and rear doors and the roof braces as well as the sides of the headliner above the doors. Never attempt to remove or dismantle the steering wheel. To ensure compliance with official safety regulations, always entrust dis- posal of airbag generators to your BMW center. Attempts to carry out service procedures undertaken by anyone other than specially-trained profes- sionals can result in system failure or undesired airbag deployment, both of which can lead to personal injury. If the
"Airbag" imprinted on the door trim panel indicates the airbag's location. Accident research shows that the safest place for children in an automo- bile is in the rear seat. However, a child sitting in the rear seat and not properly restrained may place his or her head on or near the side airbag, if installed. For example, a child even though belted may fall asleep with his or her head against the side airbag. It may be diffi- cult for a driver to ensure that children in the rear seat will remain properly positioned at all times and do not place their heads on or near the side airbag. Therefore, we recommend that the
61n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Airbags
icator lamp The indicator lamp indicates the operational status of the airbag system from ignition key posi-
1.
tem operational:
he indicator lamp comes on briefly en goes out.
tem malfunction:
he indicator lamp fails to come on he indicator lamp comes on briefly efore going out and then lighting up gain.
se respond to any malfunctions in system by immediately having it ected at your BMW center; other-
e the airbag could fail to respond to ccident in which both the angle and severity of the impact would nor- ly trigger airbag deployment.
to
Ind
tion
Sys
>T th
Sys
>T >T
b a
Plea the insp wis an a the mal
Da ta
In de
x
This is the right way for a child to sit in a child restraint when rear side airbags (arrow) are provided.
3 8 0 d
e6 3 7
This is the right way for a larger child sit wearing the safety belt when rear side airbags (arrow) are provided.
3 8 0 d
e6 3 8
62nTransporting children safely
wagon: in access to each anchor fitting lift astic plug (arrows) with the help of wdriver.
sport To ga the pl a scre
3 9 2 au
0 0 1
Commercially-available child-restraint systems are designed to be secured with a lap belt or with the lap belt por- tion of a combination lap/shoulder belt. Improperly or inadequately installed restraint systems can increase the risk of injury to children. Always read and follow the instructions that come with the system.
Child-restraint system with tether strap If you use a child-restraint system with a tether strap, three additional tether
3 8 0 u s1
2 3
anchorage points have been provided refer to the arrows in the illustrations. Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corre- sponding anchorage point to secure the child-restraint system, as shown in the following illustrations.
63n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
ir s
Transporting children safely
Before installing any child- restraint device or child seat,
se read the following: er install a rear-facing child- raint system in the front passenger t of this vehicle. r vehicle is equipped with an airbag plemental restraint system for the t passenger. Because the backrest ny rear-facing child-restraint
tem (of the kind designed for infants er 1 year and 20 Ibs./9 kg) would be in the airbag's deployment range, should never mount such a system e front passenger seat, since the act of the airbag against the child- raint's backrest could lead to ous or fatal injuries. If it is necessary a child (not an infant) to ride in the t seat, certain precautions should
e
i-
plea Nev rest sea You sup fron on a sys und with you in th imp rest seri for fron
Re pa
Da ta
In de
x
aken. First, move the passenger t as far away from the instrument el as possible. This important pre- tion is intended to maximize the dis- e between the airbag and the child.
he -
be t sea pan cau tanc
The anchor fittings of the sedan are shown in the illustration above. The one in the next column shows the sport wagon.
3 9 4 au
0 0
Each seating position is fitted with a head restraint. Lift the head restraint and pass the tether strap between th head restraint and the seat back. It is recommended to readjust the head
3 9 2 au
0 0 3
restraint into the lowest possible pos tion.
Adjust the tether strap according to t child-restraint manufacturer's instruc tions.
64nTransporting children safely
the safety belt e entire length of the belt from lt retractor. Allow the reel to t the belt somewhat and engage ckle, then tighten the belt against ild-restraint system. The retrac- echanism is now locked.
ck the safety belt se the buckle, remove the child- int device and allow the belt tor to reel the belt completely in.
-
Lock Pull th the be retrac the bu the ch tion m
Unlo Relea restra retrac
Older children should be tightly secured with a safety belt, after they have out- grown a booster seat that is appro- priate for their age, height and weight. Younger children should be secured in an appropriate forward-facing child- restraint system that has first been properly secured with a safety belt. Never install a rearward-facing child- restraint system in the front passenger seat. We strongly urge you to carefully read and comply with the instructions for installation and use provided by the child-restraint's manufacturer whenever you use such a system.
Child-restraint installation All of the rear belt retractors and the front passenger's safety belt can be locked for mounting and securing child
3 6 5 u s1
4 6
Be sure that all occupants (of all ages) remain properly and securely restrained at all times.<
All rear seating positions in your vehicle meet the recommendations of SAE J1819, an industry-recom- mended practice for securing child- restraint systems in motor vehicles.
restraint systems.
Information regarding this is located near the buckle latch of each safety belt.
65n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Transporting children safely
adian models only: anchorage points for the LATCH d-restraint system are marked with ons.
To attach the LATCH child- restraint system, your BMW
ter will provide an installation guide. guide, although not necessary for allation of a LATCH child-restraint tem, will facilitate the installation also help protect the vehicle's ting surfaces. Carefully read and
s le.
Can The chil butt
cen The inst sys and sea
3 9 4 u s7
4 9
Da ta
In de
x
comply with the safety precautions of manufacturer.<
LATCH child-restraint anchorage points* sedan LATCH: Lower Anchor and Tethers for CHildren.
3 9 0 d
e7 8 6
The rear outer seating positions are provided with anchors for a LATCH child-restraint system. The illustration show the right rear seat as an examp
3 9 4 u s7
5 0
Snap the rear center lap belt into the buckle with the word CENTER and then pull the belt away from the area where the child restraint will be mounted.
Vehicles with through-loading system*: use the small buckle to
connect the two sections of the belt, refer to page 121.<
The outer anchorage points for the LATCH child-restraint system are marked with small flags.
66nTransporting children safely
LATCH child-restraint anchorage points* sport wagon LATCH: Lower Anchor and Tethers for CHildren.
3 9 2 u s7
5 1
Child-safety locks Insert the key to the slot of a rear door lock and turn it outward:
3 9 0 d
e6 9 8
The rear outer seating positions are provided with anchors for a LATCH child-restraint system. The illustration shows the left rear seat as an example.
Canadian models only: The anchorage points for the LATCH child-restraint system are marked with buttons, refer to illustration.
Always follow all manufacturer's instructions and observe all safety
precautions when installing the LATCH child-restraint system.<
The door can now be opened from the outside only.
67n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Vehicle Memory, Key Memory
mples for Key Memory:
ocks the vehicle when you start off utomatically adjusts the drivers eat, the exterior mirrors and the teering wheel position to your per- onal programmed settings when you nlock the vehicle he automatic climate control ssumes your preset comfort settings hen you unlock the vehicle.
You will see this symbol through- out the Owner's Manual. It is to
ind you at appropriate places of the ings that are available to you.<
al
n -
ith le
t
e
Exa
>L >A
s s s u
>T a w
rem sett
Da ta
In de
x
How the system functions No doubt you have reflected at one time or another on how great it would be if you could permanently configure
4 6 3 d
e0 2 9
The system then relies on a bilateral data exchange to identify the individu user and dial in the selected settings whenever the remote control unit is used to disengage the door locks.
In order for you to distinguish betwee different keys, colored decals are sup plied together with the keys.
What the system can do Your BMW center can provide you w details on the capabilities of the Vehic Memory and Key Memory systems. A few examples follow below:
Examples for Vehicle Memory:
>Various signals as acknowledgmen
The available configuration data fall into two categories, according to whether their primary orientation is the vehicle ("Vehicle Memory") or the individual ("Key Memory"). Provided that each person has a separate remote-control key, you can have your BMW center enter two personal adjustments for two different individuals into the system.
when locking or unlocking your vehicle
>Activates/deactivates the "Follow m home" function.
68n
re starting age the parking brake sure that the gearshift lever is in utral" or the selector lever in rk" if the vehicle is equipped with automatic transmission ress the clutch pedal.
Do not allow the engine to run in enclosed spaces. The exhaust contain carbon monoxide, an ss and colorless, but highly toxic reathing the exhaust gases poses
treme health risk, and can lead to sciousness and death. leave the vehicle unattended
Steering/Ignition lock Starting the engine
0 Steering locked
1 Steering unlocked
2 Ignition switched on
3 9 0 d
e0 1 0
Vehicles with automatic transmis- sion:
Do not move the selector lever from the "Park" position until the engine is run- ning (ignition key in position 2). To turn the key back to position 0 (for instance, prior to removal), start by moving the selector lever to position P (Interlock).<
Steering unlocked You will find that it is often easier to turn the ignition key from position 0 to posi- tion 1 when you move the steering wheel slightly to help disengage the lock.
he engine running. An unattended le with a running engine repre- a potential safety hazard.<
3 Starting engine
Steering locked The key can be inserted or removed in this position only.
After removing the key, turn the steering wheel slightly to the left or right until the lock engages.
An acoustic warning is sounded when you fail to remove the ignition key after opening the driver's door.
Individual electrical accessories are ready for operation.
Starting engine Vehicles with manual transmis- sion: depress the clutch when
starting the engine. A lockout prevents the engine from starting with the clutch engaged.<
Befo >Eng >Be
"Ne "Pa an
>Dep
gases odorle gas. B an ex uncon Never
69n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Starting the engine
Extended starting attempts, char- acterized by excessively frequent
ng periods with the starter aged, can lead to damage of the lytic converter.<
When driving, standing at idle, and parking the vehicle, take care
void contact between the exhaust tem and flammable materials (grass, , leaves, etc.). Such contact could to a fire, resulting in serious per- al injury and property damage.<
or
y
- w
s
or lo eng cata
to a sys hay lead son
Re pa
ir s
Da ta
In de
x
e,
g,
n en.
Starting the engine Do not press the accelerator pedal while starting the engine.
While it is important not to release the key prematurely, you should
also avoid allowing the starter to operate continuously for more than 20 seconds at a time. Release the igni- tion key immediately as soon as the engine starts. BMW 540i with automatic transmission: Your BMW is equipped with the conve- nience starting feature. Simply turn the key to position 3 (starter) and then release it immediately. The starter continues to operate auto-
Should the engine fail to start on the first attempt (if it is very hot or cold, f instance):
>Press the accelerator pedal halfwa down while engaging the starter.
Cold starts at extremely low tempera tures of roughly +5 7 (15 6) or belo and at altitudes of over 3,300 ft (1,000 m):
>Allow the starter to turn somewhat longer (approx. 10 seconds) during your initial starting attempt.
Engine idle speed is controlled by the engine-management system. Higher idle speeds at startup are normal and should decrease as the engine warm
matically and will be deactivated as soon as the engine starts. The automatic starting mode will not operate if the battery voltage is low. The engine can be jump-started using an external power source (refer to page 164).<
Do not allow the engine to warm up by leaving it running while the vehicle remains stationary. Instead, begin to drive immediately at a moderate engine speed.
up. If engine speed does not decreas service is required.
To prevent the battery from dischargin always deactivate electrical devices that are not in use. Switch the ignitio off when the vehicle is not being driv
70nSwitching off the engine Parking brake
If, in exceptional circumstances, it should be necessary to engage rking brake while the vehicle is in n, do not pull it with excessive ure. Keep your thumb pressed st the release button while care- ulling up the lever to apply mod- pressure. sive pressure can lead to over- g and loss of traction (fishtailing) rear. rake lamps do not come on when rking brake is applied.
les with manual transmission: s engage the parking brake parking on hills and inclined sur-
the pa motio press again fully p erate Exces brakin at the The b the pa Vehic Alway when
, as first gear or reverse may not e adequate resistance to rolling.
les with automatic transmission: the selector lever in "Park."<
an help prevent corrosion and uneven braking response by engaging the parking brake from o time when coasting to a stop at lights (ensure that you will not a hazard to other road users).
faces provid Vehic Place
You c avoid gently time t traffic pose
Turn the ignition key to position 1 or 0.
Do not remove the ignition key while the vehicle is rolling. The
steering locks, making it impossible to steer the vehicle. Always remove the ignition key and engage the steering lock before leaving the vehicle. Vehicles with manual transmission: Always engage the parking brake when parking on hills and inclined sur- faces, as first gear or reverse may not provide adequate resistance to rolling. Vehicles with automatic transmission: Place the selector lever in "Park."<
The parking brake is primarily designed to prevent the vehicle from rolling while parked. It operates on the rear wheels.
3 9 0 d
e7 1 4
Vehicles with automatic transmission:
The vehicle must be stationary and the selector lever in "Park" before you can remove the ignition key.
To engage The lever engages automatically and the "PARK BRAKE" or "BRAKE" (in Canada "P") indicator lamp comes on in the instrument cluster in ignition key position 2. Refer to pages 19 and 20.
To release Pull up slightly on the lever, press the button and lower the lever.
71n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Manual transmission
erse ct only when the vehicle is com-
ely stopped. Press the gearshift r to the left to overcome the resis- e.
en you engage reverse, the backup ps will come on automatically when ignition key is in position 2.
Do not hold the vehicle in place on slopes by slipping or "riding" the
ch. Use the parking brake instead. ing the clutch causes increased ch wear.<
Rev Sele plet leve tanc
Wh lam the
clut Rid clut
Re pa
ir s
Da ta
In de
x
e t
n
BMW 525i, 530i Every time you shift gears, always depress the clutch pedal all the way down, pushing the gearshift lever into
3 6 0 d
e0 4 4
BMW 540i When shifting gears, always depress the clutch pedal all the way down, pushing the gearshift lever into the
3 8 0 d
e0 4 4
the respective end position.
Depress the clutch when starting the engine, as the lockout will prevent the engine from starting if the clutch is not depressed.
respective end position.
Depress the clutch when starting the engine, as the lockout will prevent th engine from starting if the clutch is no depressed.
When shifting gears in the 5th/6th-gear plane, be sure to
press the gearshift lever to the right i order to prevent inadvertent selection of a gear in the 3rd/4th-gear plane.<
72nAutomatic transmission*
e selection nt prevents inadvertent shifts into
selector lever positions. To disen- the detent, press the button on
Rang A dete some gage
3 9 0 u s7
3 4
nt of the selector lever knob ).
While the vehicle is stationary and before shifting out of "Park" or ral," depress the footbrake in to disengage the selector lever's
echanism (Shiftlock). the footbrake down until starting therwise the vehicle will "creep" a drive position is engaged.<
the fro (arrow
"Neut order lock m Hold off. O when
The automatic transmission of your BMW is equipped with Adaptive Trans- mission Control (ATC), a system which reacts with precision to your individual
3 9 0 u s6
2 5
Selector lever positions P R N D 4 3 2
The transmission range display varies
3 9 0 u s0
4 5
driving style and vehicle operating con- ditions. ATC operates by automatically selecting from among a range of avail- able control programs.
according to the equipment of your vehicle (refer to the illustrations).
Starting the engine The selector lever must be in "Park" or "Neutral" before it is possible to start the engine.
73n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic transmission*
nd 2 shift limiter ct this range when you wish to limit
r changes (on steep uphill or down- slopes, for instance). The transmis- shifts up only as far as the selected r limit.
ckdown" e "kickdown" mode, you achieve imum performance. ress the accelerator pedal past the stance point at the full-throttle posi- .
ed
.
el n
r-
3 a Sele gea hill sion gea
"Ki In th max Dep resi tion
Re pa
ir s
Da ta
In de
x
Before leaving the vehicle when the engine is running, move the
selector lever to the "Park" or "Neutral" position and apply the parking brake to prevent the vehicle from rolling. Never leave the vehicle unattended with the engine running. An unattended vehicle with a running engine repre- sents a potential safety hazard. If you should accidentally select "Neutral" while traveling at high speed, remove your foot from the accelerator pedal immediately. Allow the engine speed to drop to idle before selecting the desired drive position. Damage could otherwise occur due to excessive engine speed.<
N Neutral (idle) Select only if your journey is interrupt for a longer period.
D Drive (automatic shift program) This position is designed for driving under all normal operating conditions All forward gears are available.
Under normal operating conditions, fu consumption is lowest when driving i position D.
4 Sport Program The Sport Program is designed for pe formance-oriented driving.
P Park Select only when the vehicle is com- pletely stopped. The transmission locks to prevent the rear wheels from turning.
R Reverse Select only when the vehicle is com- pletely stopped.
74nAutomatic transmission*
Electronic transmission control module
If the indicator lamp comes on and/or if the message "TRANS. FAILSAFE PROG" appears in
the Check Control* display panel, this indicates a malfunction in the transmis- sion control system.
Bring the vehicle to a stop, select the "Park" position, apply the parking brake and switch the engine off (ignition key position 0). Restart the engine after a few seconds. If the indicator lamp goes out again after a few seconds, the normal transmission functions have been restored. You may continue to
If the indicator lamp does not go out, you can move the selector lever to all positions. However, the vehicle will now only drive forward with limited gear selection.
You should respond by avoiding extreme engine loads and referring the problem to the nearest BMW center.
Never perform work in the engine compartment without first
ensuring that the transmission is in "Park" or "Neutral" as the vehicle could otherwise start to move off on its own.<
For jump-starting, towing and tow-
drive as usual. starting, refer to pages 164 and 165.
75n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Automatic transmission with Steptronic*
ge selection etent prevents inadvertent shifts to "Reverse" or "Park" selector lever itions. To disengage the detent, ss the button on the front side of selector lever knob (arrow).
While the vehicle is stationary and before shifting out of "Park" or
utral," depress the footbrake in er to disengage the selector lever's mechanism (Shiftlock).
d the footbrake down until starting The vehicle will otherwise "creep" n a drive position is engaged.<
Ran A d the pos pre the
"Ne ord lock Hol off. whe
3 9 0 d
e7 1 8
In
You can drive as with a normal auto- matic transmission. In addition, you can also shift manually.
When you move the selector lever from the "D" position to the left into the M/S range, the performance-oriented shift programs of the automatic transmission are engaged. Steptronic enters the manual selection mode and executes the desired shift whenever you tap the selector lever in the direction indicated by "+" or "." When you wish to use the automatic transmission mode again, move the selector lever to the right into the "D" position.
Under normal operating conditions, fuel
Selector lever positions P R N D M/S
Starting the engine
3 9 0 u s6
0 7
consumption is lowest when driving in position D.
The engine can only be started in selector lever positions P or N.
76nAutomatic transmission with Steptronic*
Manual mode and t Program you change from "D" to "M/S," ort Program is activated. This is ted by "D S" in the transmission display. The Sport Program is ned for performance-oriented g.
he first brief touch, the automatic ission shifts from the Sport Pro-
to the manual mode. Whenever ove the selector lever in the "+"
-
M/S Spor When the Sp indica range desig drivin
With t transm gram you m
3 9 0 d
e7 2 1
ion, the transmission upshifts, and you move it in the "" direction, nsmission downshifts. M1...M5 displayed in the gear indicator.
direct when the tra will be
To prevent the vehicle from starting off on its own, always
move the selector lever to position P or N and engage the parking brake before leaving your vehicle with the engine running. Do not leave the vehicle unat- tended with the engine running. An unattended vehicle with a running engine represents a potential safety hazard.<
P Park Select "Park" only when the vehicle is completely stopped. The transmission locks to prevent the rear wheels from turning.
D Drive (automatic shift program) This position is designed for driving under all normal operating conditions. All forward gears are available.
"Kickdown" In the "kickdown" mode, you achieve maximum acceleration and top speed in position D. Depress the accelerator pedal past the resistance point at the full-throttle posi tion.
R Reverse Select "Reverse" only when the vehicle is completely stopped.
N Neutral (idle) Select "Neutral" only if your journey is interrupted for a longer period.
77n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
a
Automatic transmission with Steptronic*
Never perform work in the engine compartment without first
uring that the transmission is in rk" or "Neutral" as the vehicle could rwise start to move off on its own.<
jump-starting, towing and tow- ting, refer to pages 164 and 165.
n -
e
an s. ve
ens "Pa othe
For star
Da t
In de
x
ATC executes upshifts and downshifts only when the new gear will provide a suitable combination of vehicle and engine speed, i.e., ATC will not execute downshifts that would cause the engine to overrev. The gear selected will appear briefly in the instrument cluster followed by the current gear.
If you are driving in the manual mode and wish to accelerate
rapidly from low road speeds (when passing, for instance), you must shift down manually or with the "kickdown" function.<
You can only change from "M/S" to
Electronic transmission control module
If the indicator lamp comes o or the message "TRANS. FAIL SAFE PROG" appears in the
Check Control*, there is a fault in the transmission system.
Bring the vehicle to a stop. Move the transmission selector lever to "P." Engage the parking brake and turn th engine off (ignition key to position 0).
Wait a few seconds, then start the engine. If the indicator lamp goes out after a few seconds, normal transmission performance has been restored. You
selector lever positions "P," "R," and "N" via the "D" position.
may continue to drive as usual. If the indicator lamp does not go out, you c place the selector lever in all position However, the vehicle will now only dri forward with limited gear selection.
If this happens, avoid extreme engine loads and refer the problem to the nearest BMW center.
78nIndicator/Headlamp flasher Washer/Wiper system
mittent mode or rain sensor* ittent mode:
an set the wipe interval to four s with rotary dial 7. ition, the wipe interval is varied atically depending on road .
ensor:
in sensor is positioned on the hield, directly ahead of the inte- arview mirror.
tivate the rain sensor: the lever to position 1 with the n key in position 1 or higher. The s travel once across the wind-
Inter Interm
You c stage In add autom speed
Rain s
The ra winds rior re
To ac Move ignitio wiper
, regardless of the weather tions.
an leave the lever permanently in on 1. Whenever the ignition key is ition 1 or higher, all you then need to activate the rain sensor is turn the rotary dial 7.
just the sensitivity of the rain r: otary dial 7.
ivating the rain sensor: lever to position 0.
shield condi
You c positi in pos to do briefly
To ad senso Turn r
Deact Move
1 High beams (blue indicator lamp)
2 Headlamp flasher (blue indicator lamp)
3 9 0 d
e7 2 2
0 Wipers retracted
1 Intermittent mode or rain sensor* 2 Normal wipe
3 9 4 d
e7 3 0
3 Turn signal indicator (green indicator lamp accompanied by periodic clicking sound from the relay)
To signal briefly Press the lever up to but not beyond the pressure point. It then returns to the center position when released.
If the indicator lamp and the clicking from the relay are both
faster than normal, one of the turn signal indicators has failed.<
3 Fast wipe
4 Brief wipe
5 Clean the windshield
6 Intensive cleaning* 7 Rotary dial for controlling wipe inter-
vals in the intermittent mode and for setting the rain sensor's sensitivity level*
79n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Washer/Wiper system
r window wiper sport wagon etracted (home) position of the rear indow wiper
ear window wiper in intermittent
ve-
to
is
Rea 0 R
w
1 R
3 9 2 d
e7 2 6
Re pa
ir s
Da ta
In de
x
ode. Automatically switches to con- nuos operation when reverse is ngaged
lean the rear window
can also program the interval:
witch briefly from position 0 to posi- on 1 he time until reactivation (from posi- on 0 to 1) is the programmed terval (max. 30 seconds).
on ti-
er- ge
ed in
m ti e
2 C
You
>S ti
>T ti in
Turn the rain sensor off in auto- matic car washes. Failure to do so
could result in damage caused by undesired wiper activation.<
Normal wipe The system automatically reverts to operation in the intermittent mode whenever the vehicle is stationary (not on vehicles with rain sensor*).
Fast wipe The wipers revert to operation at normal speed when the vehicle stops (not on vehicles with rain sensor*).
Intensive cleaning* As in setting 5. In addition, an intensi action washer fluid is first sprayed on the windshield.
For changing the wiper blades, refer page 152.
Clean the headlamps* When the headlamps are on, they are also cleaned automatically every fifth time you activate the clean the wind- shield (5) or intensive cleaning (6) mode.
Do not use the washers if there any danger that the fluid will
Clean the windshield The system sprays washer fluid against the windshield and activates the wipers for a brief period.
freeze on the windshield, as your visi could be obscured. Always use an an freeze agent. Refer to page 141. Do not use the washers when the res voir is empty. This could cause dama to the washer pump.<
Windshield washer jets The windshield washer jets are warm automatically when the ignition key is position 2.
80nWasher/Wiper system Cruise control
tivate the system
ition key position 1 or 2: the button and the indicator lamp instrument cluster (refer to 21) will come on. You can now e cruise control.
Do not use cruise control on twisting roads, when high traffic ty prevents driving at a constant , or when the road surface is slick , rain, ice) or loose (rocks or l, sand).<
r
To ac
In ign Press in the page use th
densi speed (snow grave
activate the system
button as often as needed until dicator lamp in the instrument r goes out.
control is also deactivated when nition key is in position 0.
peed stored in memory is deleted.
To de
Press the in cluste
Cruise the ig
The s
The programmed interval is deleted
>approx. 10 seconds after the lever is placed in position 0 or
>after the engine is switched off.
When the rear window is opened, the rear window wiper is switched off. It must be switched on again after the window has been closed.
For changing the wiper blade, refer to page 152.
You can store and automatically main- tain any desired vehicle speed above approx. 20 mph (30 km/h).
The cruise control is available wheneve the engine is running and the system has been activated.
81n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
pa ir
s
Cruise control
interrupt the cruise control
en the system is activated, press the on. The indicator lamp stays on. can use the cruise control again never you want by calling up the ed that was stored last.
ddition, cruise control is interrupted matically:
hen the brakes are applied hen you depress the clutch pedal
you exceed or fall below the pro- rammed speed for an extended eriod (by depressing the acceler- tor, for example).
recall the stored setting
d e
To
Wh butt You whe spe
In a auto
>W >W > If
g p a
To
Re Da
ta In
de x
ss button: vehicle accelerates to and main- s the last speed stored.
Pre The tain
To maintain and store speed or to accelerate
Press button (+) briefly: The system maintains and stores the current vehicle speed. Every time you tap the button, the speed increases by approx. 0.6 mph (1 km/h).
Press and hold button (+): The vehicle accelerates without pres- sure on the accelerator pedal. When you release the button, the system maintains and stores the current speed.
If, on a downhill gradient, the engine braking effect is not suffi-
To decelerate
Press button () briefly: If you are already driving with active cruise control, the speed is decrease by approx. 0.6 mph (1 km/h) every tim you tap the button.
Press and hold button (): With the cruise control active, the system automatically reduces the throttle opening to slow the vehicle. When you release the button, the system maintains and stores the cur- rent speed.
cient, the controlled speed can be exceeded. Speed can drop on uphill grades if the engine output is insuffi- cient.<
82n
arning outside temperature drops to x +37.5 7 (+3 6), a warning l sounds and the display flashes .
The ice warning does not alter the fact that surface ice can form at ratures above +37.5 7 (+3 6), dges and shaded road surfaces,
Odometer, outside temperature display
1 Odometer
2 Trip odometer
3 Outside temperature display
3 9 0 u s6
0 8
Outside temperature display The outside temperature appears in the display from ignition key position 1 on.
hange the units of measure- 6) by
g and holding down the (arrow) with the ignition key in 1 n turning the ignition key to 0
to page 88.
Odometer You can activate the displays shown in the illustration with the ignition key in position 0 by pressing the button in the instrument cluster (arrow).
The range of available displays varies according to your individual vehicle's equipment.
Trip odometer To reset the trip odometer to zero, press the button (arrow) with the igni- tion key in position 1 or 2.
You can c ment (7/
1. pressin button position
2. and the
Refer also
.
Ice w If the appro signa briefly
tempe on bri etc.<
83n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tachometer Energy control Fuel gauge
en you switch on the ignition, the cator lamp comes on briefly to firm that the system is operational.
e indicator lamp stays on, there are
n
Wh indi con
If th
3 9 0 u s0
0 6
Re pa
ir s
Da ta
In de
x
rox.
.0 gal (8 liters) MW 525i, BMW 530i .5 gal (10 liters) BMW 540i
el still in the tank.
k capacity: refer to page 175
tain operating conditions (such as e encountered in mountainous s) may cause the needle to fluc- e slightly.
Please refuel early, since driving to the last drop of fuel can result in
age to the engine and/or catalytic verter.<
- a-
app
>2 B
>2
of fu
Tan
Cer thos area tuat
dam con
Do not operate the engine with the needle in the red overspeed zone of the gauge.
To protect the engine, the engine-man-
3 9 0 u s0
0 4
Indicates the current fuel consumptio in mpg (in liters/100 km on Canadian vehicles). This allows you to see whether your current driving style is conducive to fuel economy with
3 9 0 u s0
0 5
agement system interrupts the fuel supply when you approach this sector. minimum exhaust emissions.
When the vehicle is stationary, the dis play goes to "Maximum" (zero on Can dian models).
84nCoolant temperature gauge Service Interval Display
nge of available displays varies ding to your individual vehicle's ment.
n lamps umber of illuminated lamps ases as the time for your next
The ra accor equip
Gree The n decre
3 9 0 u s7
0 2
maintenance visit approaches.
w lamp ield appears together with RVICE or INSPECTION.
enance is due. Please contact MW center for an appointment.
lamp aintenance deadline has been d.
Yello This f OILSE
Maint your B
Red The m passe
Blue The engine is still cold. Drive at mod- erate engine and vehicle speeds.
3 9 0 d
e0 0 7
Between the blue and red zones Normal operating range. The needle may rise as far as the edge of the red sector in normal operation.
Checking coolant level: refer to page 144.
Red When you switch on the ignition, the warning lamp* comes on briefly to con- firm that the system is operational.
If the warning lamp lights up during normal vehicle operation, or the mes- sage "COOLANT TEMPERATURE" appears in the Check Control*, the engine is overheated. Switch off the engine immediately and allow it to cool down.
85n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Check Control
ty 1
defects are immediately indi- by a gong and a flashing warning ol 1. Simultaneous defects will be
Priori
These cated symb
Re pa
ir s
Da ta
In de
x
yed consecutively. These status ages remain in the display until the ts are corrected. They cannot be d by pressing the CHECK 3:
displa mess defec delete button
Graphic display* The following alerts and status mes- sages are displayed with icons from ignition key position 2 and remain in the
3 9 0 d
e1 2 1
Alphanumeric display* Text messages are used to alert the driver to system malfunctions when the ignition key is turned to position 2. The
3 9 0 u s1
1 1
display until the defects are corrected:
1 Check low beams 2 Add washer fluid (goes out after
approx. 1 minute) 3 Door open 4 Luggage compartment lid/tailgate
open 5 Check brake and tail lamps.
A defective center brake lamp is indi- cated by the upper symbol
When you open the door after stopping, a warning signal sounds without a visual indicator for:
> "LIGHTS ON" and > "KEY IN IGNITION LOCK."
alert is accompanied by a gong.
1 Status messages symbol
2 Display
3 CHECK button
Messages warning of system malfunc- tions are assigned one of two priority levels:
86nCheck Control
ECK FILLER CAP" ect the cap to make sure that it is ed properly, refer to page 25 TSIDE TEMP. +20 7 (5 6)" display is only an example. The
rent temperature is displayed at side temperatures of +37.5 7 6) and below. Refer also to e 82 E PRESSURE SET"* RDC has imported the current tion pressure in the tires as the et values which the system will
nitor. er to page 101 ECK TIRE PRESSURE"*
> "CH Insp clos
> "OU This cur out (+3 pag
> "TIR The infla targ mo Ref
> "CH
ssure to specifications at the liest opportunity (next stop to el). er to page 101 ECONTROL INACTIVE"* mporary interference of the RDC system fault. Refer to page 102 ECK BRAKE LIGHTS" mp has failed or the electrical uit has a fault. Refer to pages 156 162 or consult a BMW center
Che pre ear refu Ref
> "TIR A te or a
> "CH A la circ and
> "RELEASE PARKINGBRAKE" > "COOLANT TEMPERATURE"
The coolant is overheated. Stop the vehicle immediately and switch off the engine. Refer to pages 84 and 144
> "STOP!ENGINE OILPRESS" The oil pressure is too low. Stop the vehicle immediately and switch off the engine. Refer to pages 19, 142
> "CHECK BRAKE FLUID" Indicates that brake fluid is down to roughly minimum level. Have the reservoir topped up at the earliest opportunity, refer to page 145. Have the source of the brake fluid loss
Priority 2
These displays appear for 20 seconds when the ignition key is turned to posi- tion 2. The warning symbols remain after the message disappears. You can display the messages again by pressing the CHECK button 3:
> "TRUNKLID OPEN" Message appears only when the vehicle is initially set in motion
> "DOOR OPEN" This message appears after a defined road speed has been exceeded
> "FASTEN SEAT BELTS"* In addition to this message, a warning lamp with the safety belt icon
> "TIRE DEFECT"* Reduce vehicle speed immediately and stop the vehicle. Avoid hard brake applications. Do not oversteer. Refer to page 102
> "SELFLEVEL SUSP.INACT" Please consult the nearest BMW center. Refer to page 101
> "LIMIT"* Display if the programmed speed limit has been exceeded, refer to page 93
appears and an acoustic signal sounds
> "WASHER FLUID LOW" Too low; top up fluid at the next opportunity. Refer to page 141
> "CHECK ENGINE OIL LEV" The engine oil level is at the absolute minimum. You should respond by topping up the oil as soon as possible, refer to page 142. Do not continue for more than approx. 30 miles (50 km) before adding oil
87n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Check Control
check the Check Control ss the CHECK button 3 with the tion key in position 2:
CK CONTROL OK appears in the lay.
malfunctions are present in the itored systems.
mputer can find a description of the com- r on pages 88 and 93 as well as in
"Owner's Manual for Onboard Com- r."
You can have the Check Control and computer messages
ng e
en
ity
o
To Pre igni
CHE disp
No mon
Co You pute the pute
Re pa
ir s
Da ta
In de
x
layed in a different language.<
le
disp
> "CHECK LOWBEAM LIGHTS" "CHECK SIDE LIGHTS" "CHECK REAR LIGHTS" "CHECK FRONT FOGLAMPS" "CHECK LICPLATE LIGHT" "CHECK HIGHBEAM LIGHT" "CHECK BACK UP LIGHTS" Defective bulb or circuit. Refer to pages 153 and following, page 162 or consult your BMW center
> "TRANS. FAILSAFE PROG" Please consult the nearest BMW center. Refer to pages 74 and 77
> "CHECK BRAKE LININGS" Have the brake pads inspected by your BMW center. Refer to page 134
> "CHECK COOLANT LEVEL"
Displays after completion of trip All of the malfunctions registered duri the trip appear consecutively when th ignition key is turned to position 0.
The following displays will appear wh appropriate:
> "LIGHTS ON" > "KEY IN IGNITION LOCK" > "CHECK ENGINE OIL LEV"
Add engine oil at the next opportun (next stop to refuel). Refer to page 142.
This display appears when you open the driver's door after parking the vehicle. A supplementary gong is als heard.
Coolant too low, top up at the next opportunity. Refer to page 144
> "ENGINE FAILSAFE PROG"* Indicates a malfunction in the elec- tronic engine-management system, which then reverts to an emergency default program allowing continued operation at reduced power and lower engine speeds. Please have the system inspected at your BMW center.
Status messages remain available fo period of approx. three minutes after the display goes out and the key is removed from the ignition. Press the CHECK button 3. If there were multip reports, press the CHECK button repeatedly to view them all in sequence.
88nComputer
lete the display the button in the turn signal lever the average speed is being shown cel the display of computer infor-
n.
start calculations an maintain pressure on the within the turn signal lever to
the computer and initiate new cal- ons of average speed and fuel mption. This feature is only avail- hen the engine is running.
puter with alphanumeric ay*
To de Press while to can matio
To re You c button reset culati consu able w
Com displ
r vehicle is equipped with Check ol featuring an alphanumeric dis- description of the corresponding
uter can be found starting on 93 as well as in the "Owner's al for Onboard Computer."
.
If you Contr play, a comp page Manu
Mode selection From ignition key position 1 and up, you can press the button in the turn signal lever to retrieve information from the
3 9 0 d
e7 0 0
Outside temperature and average fuel consumption You can change the units of measure (7/6) for the outside temperature dis
3 9 0 u s1
2 6
computer for display. Tap the button toward the steering column to scroll to the next status display in the sequence.
The displays appear in the following order: outside temperature, average fuel consumption, cruising range, average speed.
Starting with ignition key position 1, the last active setting is displayed.
The range of available displays varies according to your individual vehicle's equipment.
play by
1. pressing and holding the trip odometer reset button (in ignition key position 1)
2. and then turning the ignition key to 0
Refer also to page 82.
Cruising range and average speed The computer bases its calculations of the cruising range on the previous driving style and conditions.
The computer ignores any time spent when the vehicle is stationary and the engine is not running in its average speed calculations.
89n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Multi-Information Display (MID)*
isplay for the entry and display uttons. Depending on the operating ode, the functions and alternatives hich can be selected at the buttons re displayed here
ntry and display buttons for oper- ting the various computer systems
k
6 D b m w a
7 E a
Da ta
In de
x
Central display The MID serves as the central display and operation for the following onboard systems:
>Digital clock (e.g. time display, date) >Audio systems (radio, cassette, CD) >Computer (e.g. fuel consumption,
cruising range) >Cellular phone (e.g. dialing).
You will find explanations and informa- tion on operating the digital clock and the computer on the following pages. Please refer to the separate Owner's Manual instructions for operating the audio systems, the cellular phone and the onboard computer.
1 Function button for audio systems
2 Function button for the cellular phone*
3 Indicator lamp for independent 3 9 0 u s7
0 5
The system rejects implausible numerical entries.
Any interruption in the supply of elec- trical power from the battery will result in the loss of all stored data. Once the power has been restored, you will need to reset the clock and re-enter any times for activating the auxiliary heater/ parked-car ventilation. Distance and vehicle speed data must also be entered again.<
ventilation* > remains on if switch-on time is
active > flashes while operating
4 Function button for the digital cloc and computer
5 Indicator display for the various computer systems
90nDigital clock in the MID*
ange the date
the left side of the button.
.
the right side of the button: ots and the DATE display flash.
er the setting:
on the left or right, or hold the down.
To ch
Press
Press
Press The d
To alt
Press button
re the entry:
the right side of the button.
lock takes leap years into account erefore does not have to be reset
ally.
To sto
Press
The c and th manu
Only make entries when the vehicle is standing still to avoid
endangering yourself or other road users.<
To call up time or date
Press the left side of the button.
Display shows:
You can have the time displayed in 12 or 24 hours.
To change the display:
To change the time
Press the left side of the button.
Press the right side of the button: The dots flash in the display.
To alter the setting:
Press on the left or right, or hold the button down.
Press the left side of the button.
If the 12-hour time display is in use, AM or PM appear after the time.
To store the entry:
Press the right side of the button.
91n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Digital clock in the MID*
tart the stopwatch function:
ss the right side of the button.
ake an intermediate time reading:
ss.
ss: stopwatch display can be seen nting up; the stopwatch continues
To s
Pre
To t
Pre
Pre The cou
Re pa
ir s
Da ta
In de
x
un.
alt the stopwatch:
ss the right side of the button.
The stopwatch is halted when the ignition key is turned back to 0,
starts to run again when the ignition is turned to 1.<
to r
To h
Pre
but key
Reminder signal You can program a reminder signal (Memo) to be heard every hour, so that you are sure not to miss a news broad- cast, for example.
Press the left side of the button.
Press: MEMO OFF appears in the display for entry and query buttons, and the tone symbol will appear in the upper right of the display.
Stopwatch
Press the left side of the button.
Press.
Display shows:
A signal is then heard 15 seconds before each hour.
92nDigital clock in the MID*
tivate/deactivate the time:
twice.
tly switching the parked-car lation* on and off The parked-car ventilation func- tion is only available in ignition key on 1.<
the left side of the button.
To ac
Press
Direc venti
positi
Press
.
.
l
l
Press
Or
Press
Enter the switch-on times for the parked-car ventilation* You can enter two different activation times. The ventilation will shut off automati- cally after 30 minutes.
To use the parked-car ventilation system, please refer to the infor-
mation provided starting on page 114.<
Press the left side of the button.
To enter the time:
Press on the left or right, or hold the button down.
To confirm the entry:
Press the right side of the button.
The activated time is marked with an asterisk.
Press on the left or right.
Display shows:
Press the right side of the button: Display flashes, e.g. TIMER 1.
The activation times remain stored unti new entries are made.
You can change switch-on times that have already been memorized by making a new time entry as described above.
When the switch-on time is active, the LED comes on in the MID. During actua operation of the ventilation, the LED flashes. The LED goes out when the system is switched off.
93n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer in the MID*
lay shows:
er the limit by pressing the function ons.
orrect an entry:
ss the left side of the button and eat the entry.
tore the entry:
ss the right side of the button.
h
e
t
Disp
Ent butt
To c
Pre rep
To s
Pre
Re pa
ir s
Da ta
In de
x
Only make entries when the vehicle is standing still to avoid
endangering yourself or other road users.<
Computer calculations begin at the start of the journey. Information can also be accessed for display by remote control, refer to page 97.
Speed limit Speed limit entry:
You can enter the road speed at whic you wish to hear and see a reminder signal: a signal will sound, the word LIMIT will flash, and for a moment, th speed limit warning stored in the memory will appear on the instrumen cluster as an alphanumeric display*, along with the Check Control.
The speed limit reminder is only repeated if the vehicle has in the meantime been driven at least 3 mph (approx. 5 km/h) slower.
Press the right side of the button.
Press.
Press the right side of the button.
94nComputer in the MID*
rrect an entry:
the left side of the button and t the entry.
re the entry:
the right side of the button.
all stored value:
the right side of the button.
To co
Press repea
To sto
Press
To rec
Press
the left side of the button.
Press
To adopt the current speed as the speed limit:
Press the right side of the button.
Press.
Press twice at right.
Deactivating the speed limit:
Distance to destination The remaining distance to the destina- tion will be displayed on the screen. This is of course only possible if you entered the entire distance before starting the journey.
Enter:
Press the right side of the button.
Press the left side of the button.
Press the right side of the button.
Press.
The LIMIT display goes out, but the stored value is not lost and can be reactivated by pressing the LIMIT button.
Press the right side of the button.
Display shows:
You can enter the distance by pressing the function buttons.
95n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer in the MID*
l consumption can have the average fuel sumption displayed for two different ances, for example a complete ney and part of the journey.
tart the calculation, select the func- with the engine running:
ss the right side of the button.
ss on the left or right: display will show the average fuel sumption.
d k
lls r-
Fue You con dist jour
To s tion
Pre
Pre The con
Re pa
ir s
Da ta
In de
x
estart the fuel consumption ulation:
ss on the left or right.
ss the right side of the button.
To r calc
Pre
Pre
Estimated time of arrival When you have entered the distance from your destination, you can obtain an estimated time of arrival display which is continuously updated by the computer as your average driving period varies.
Press the right side of the button.
Press the right side of the button: The estimated time of arrival is displayed.
Cruising range The distance which the vehicle shoul cover on the remaining fuel in the tan is displayed.
Press the right side of the button.
Press: The display shows the estimated cruising range.
Always refuel when the range fa below 30 miles (50 km), as othe
wise the engine or the catalytic converter could be damaged.<
The computer will only register fuel amounts over 1.8 gal (6 liters).
96nComputer in the MID*
rrect an entry:
the left side of the button and t the entry.
re the entry:
the right side of the button. he ignition key to position 0.
activate the code:
you are asked to enter the code on key in position 1 or 2):
To co
Press repea
To sto
Press Turn t
To de
When (igniti
er the code with the function tons.
the right side of the button.
the code has been entered cor- and confirmed with the SET , the time display appears.
>Ent but
Press
After rectly button
Speed You can call up a display of the vehicle's average speed.
To start the calculation, select the func- tion with the engine running:
Press the right side of the button.
Press: The display shows the average speed.
To recalculate the speed:
Extended immobilizer function You can enter a code that will prevent the engine from being started unless the code is entered.
If you do not have access to the code, the emergency deactivation procedure will have to be carried out, refer to the next page.
Entering and activating the code:
Press the right side of the button.
Press the right side of the button.
Press the left side of the button.
Display shows:
Enter the code with the function buttons.
97n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Computer in the MID*
ave all the available information layed, press
e button on the lever until the isplay shows PROG 1 e SET button.
btain individual items of informa- , press the button briefly as often as essary.
r
.
To h disp
> th d
> th
To o tion nec
Re pa
ir s
Da ta
In de
x
1
ch
:
After three incorrect code entries, or three attempts to start the engine without a code entry, the alarm will sound for 30 seconds on vehicles equipped with an alarm system.
Deactivating the alarm in an emer- gency:
If you have forgotten the code, proceed as follows:
1. Disconnect the battery, wait approx. 2 minutes, then reconnect it. Note that on vehicles with an alarm system, the alarm will sound
2. Turn the ignition key to position 1: The time display will count down for the next ten minutes
Remote control The button on the turn signal indicato lever can be used to select the com- puter data which are to be displayed
3 9 0 d
e7 0 0
3. After ten minutes, start the engine.
If the code becomes available again in the meantime, it can be
entered during the waiting period after pressing the CODE button.<
To do this, press
> the button on the lever until PROG shows on the display
> the MID buttons in the order in whi you wish the information to be displayed. Each time an entry is stored, the program number appears on the display.
To terminate the selection procedure
Press the right side of the button.
98n
stic signals istance from an obstacle is indi- in front with a higher intermittent at the rear with a lower intermit- ne. As the distance between
le and object decreases, the inter- etween the tones become r. A continuous tone indicates the
nce of an object less than 1 ft ) away.
arning signal is canceled after x. three seconds if you are g parallel to a wall.
e is a malfunction of the system: dicator lamp flashes and a brief
Park Distance Control (PDC)*
The concept PDC provides extra safety and conve- nience during parking maneuvers by providing an acoustic signal to indicate the distance between your front and rear bumpers and the nearest object. To do this, four ultrasonic sensors in the front and rear bumpers each mea- sure the distance to the nearest object. The monitoring range of the front sen- sors and two rear sensors at the ends of the rear bumper extends outward roughly 2 ft (60 cm), while the rear bumper's two centrally located sensors detect objects at distances of up to approx. 5 ft (1.50 meters).
Manual activation Press the button, the indicator lamp lights up.
3 9 0 u s7
2 7
uous signal tone is heard
u activate PDC with the button n you first select reverse or move
selector lever into the "R" posi- after switching on the ignition malfunction occurs while the PDC tem is active.
h the system off and have the of the malfunction corrected at MW center.
Automatic function The system starts to operate automati- cally approx. one second after you select reverse or move the selector lever into the "R" position with the igni- tion key in position 2.
When you subsequently drive a dis- tance of more than approx. 160 ft (50 meters) or exceed a speed of approx. 20 mph (30 km/h), the system switches off and the indicator lamp goes out. Reactivate the system as required.
Acou The d cated tone, tent to vehic vals b shorte prese (30 cm
The w appro movin
If ther The in contin
> if yo >whe
the
> if a sys
Switc cause your B
99n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Park Distance Control (PDC)* ASC+T/DSC*
omatic Stability Control plus ction (ASC+T)/Dynamic bility Control (DSC)* se systems contribute to additional icle stability, especially during eleration and when cornering.
DSC system enhances the benefits he ASC+T. In addition to optimizing icle stability and traction during eleration or when starting from a dstill, a further benefit is realized in ering. This, of course, is true only in physically feasible limits.
system activates automatically h time you start the engine.
e e
he e. re
Aut Tra Sta The veh acc
The of t veh acc stan corn with
The eac
Da ta
In de
x
PDC does not remove the driver's personal responsibility for evalu-
ating the distance between the vehicle and any obstacles. Even with the sen- sors, there is a blind spot in which objects cannot be detected. This applies especially in those cases where the system approaches the physical limits of ultrasonic measurement, as occurs with tow bars and trailer cou- plings, and in the vicinity of thin or wedge-shaped objects. Certain sources of sound, such as a loud radio, could drown out the PDC signal tone.<
Keep the sensors clean and fre of ice or snow in order to ensur
that they continue to operate effec- tively. Do not apply high pressure spray to t sensors for a prolonged period of tim Maintain an adequate distance of mo than 4 in (10 cm).<
100nASC+T/DSC*
activate the system the button again; the indicator goes out.
The laws of physics cannot be repealed, even with ASC+T/DSC. propriate driving style always ns the responsibility of the driver. t use the extra safety margins fur-
d by these systems as an excuse ing unnecessary risks.<
mic Brake Control (DBC)* is an integral component of the ystem.
To re Press lamp
An ap remai Do no nishe for tak
Dyna DBC DSC s
ystem responds to sudden, high- ity applications of force to the pedal by automatically braking hicle with maximum boost to
ve the shortest possible braking ces during "panic stops." This exploits all the benefits of ABS.
t reduce the pressure exerted st the brake pedal until the g maneuver has been completed.
is deactivated when you release ake pedal.
s
The s intens brake the ve achie distan system
Do no again brakin DBC the br
Indicator lamp The indicator lamp in the instru- ment cluster goes out shortly after you switch on the ignition.
Refer to page 21.
Indicator lamp flashes: The system is active and governs drive torque and braking force.
If the indicator lamp fails to go out after the engine is started, or if it comes on during normal driving: There is a system malfunction or the system was deactivated with the button. You can still drive the vehicle normally without ASC+T/DSC.
To deactivate the system Press the button, the indicator lamp lights up and remains on continuously.
3 9 0 u s7
2 8
Please consult your BMW center for repairs.
Depending on equipment options, the button is marked with ASC or DSC.
With deactivated ASC+T/DSC you are driving with conventional, unregulated torque transfer.
In the following exceptional situations, it may be effective to deactivate the ASC+T/DSC for a brief period:
>When rocking the vehicle or starting off in deep snow or on loose surface
>When driving with snow chains.
101n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Self-leveling suspension* Tire Pressure Monitor (RDC)*
ivate the system urn the ignition key to position 2 (do ot start the engine) aintain pressure on the button until
ll
t s -
he
ru- n-
Act 1. T
n 2. M
3 9 0 d
e7 0 4
Re pa
ir s
Da ta
In de
x
e yellow indicator lamp in the strument cluster comes on for sev- ral seconds or the message "SET IRE PRESSURE" appears in the heck Control panel fter you have driven for a few min- tes, the RDC will import the current flation pressure in the tires as the
eference values which the system ill monitor.
will only have to repeat this proce- e if the tire inflation pressure must orrected. Otherwise, the RDC func- s automatically when the ignition is in position 2, and thus operates never the vehicle is driven.
th in e T C
3. A u in r w
You dur be c tion key whe
The warning lamp for the self- leveling suspension comes on, or the message "SELFLEVEL
SUSP.INACT" appears in the Check Control: there is a malfunction in the self-leveling suspension.
Stop and inspect the vehicle. If it is riding significantly lower in the rear than in the front, or if it is sitting at an incline (left rear compared to right rear), con- sult the nearest BMW center. Drive with appropriate caution in the meantime. The vehicle has reduced ground clear- ance or driving comfort is noticeably reduced.
Even if the attitude of the vehicle is
The concept RDC monitors the tire pressures at a four wheels, even when the vehicle is moving. The system provides an aler whenever the inflation pressure drop significantly below the specified pres sure in one or more tires.
In order for the system to "learn" the correct tire inflation pressure, check t inflation pressure in all tires. Refer to the table of "Tire inflation pressures" beginning on page 27 and make any necessary corrections. Then activate the system.
This indicator lamp in the inst ment cluster or the Check Co
normal, you should consult the nearest BMW center if the warning lamp indi- cates a system fault.
trol will inform you if the tire pressure is not correct.
102nTire Pressure Monitor (RDC)*
m interference g the period of the malfunction, llow indicator lamp comes on message "TIRECONTROL INAC- appears in the Check Control.
ill also see the same message
he event of a system fault wheel is mounted without the C electronics addition to the spare tire, addi- al wheels with RDC electronics on board.
e contact your BMW center for onal information.
.
- t
Syste Durin the ye or the TIVE"
You w
> in t > if a
RD > if, in
tion are
Pleas additi
Loss of tire pressure If, after a certain period of time, the inflation pressure has gone down sig- nificantly (which is normal for any tire), the yellow indicator lamp comes on or the message "CHECK TIRE PRES- SURE" appears in the Check Control.
This alerts you that you should have the tires inflated to the specified pressures as soon as possible.
If you are prompted to check the tire pressure shortly after a cor-
rection has been made, this indicates that the corrected values were not accurate. Please check the inflation
Flat tire If there is a tire failure with a loss of inflation pressure, the red indicator lamp comes on or the message "TIRE DEFECT" appears in the Check Control In addition, a gong sounds.
If this occurs, reduce vehicle speed immediately and stop the vehicle in a safe location. Avoid hard brake applica tions. Do not oversteer. Replace the fla tire.
The spare tire which is available in your vehicle as standard equip-
ment is equipped with the electronics required for RDC and, following activa-
pressure again and make corrections according to the inflation pressure table.<
tion of the system, is also monitored after it is mounted.<
The RDC cannot alert you to severe and sudden tire damage
caused by external factors.<
Have the tires changed at your BMW center.
Your BMW center has the information needed for working with RDC and is equipped with the necessary special tools.<
103n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
omatic headlamp control* When the switch is set to this position the system automati- cally activates and cancels the
beams in response to changes in ient light ( in tunnels, at dusk, etc.) ell as rain and snow.
The vehicle's external lamps remain on constantly when you
tch on the front fog lamps after the dlamps have come on automati- y.<
Automatic headlamp control cannot serve as a substitute for
driver's judgement in determining
Parking lamps/Low beams
Parking lamps (side marker lamps)
With the switch in this position, the front, rear and side vehicle
3 9 0 d
e7 3 2
"Follow me home": When you activate the headlamp
flasher after parking the vehicle and switching off the lamps, the low beams will come on for a brief period. You may also have this function deactivated if you wish.<
"LIGHTS ON" warning When the driver's door is opened with the ignition key in position 0 an acoustic signal will sound for several seconds to remind you that you have forgotten to switch off the lamps.
Vehicles with alphanumeric Check Control*:
Re pa
ir s
Da ta
In de
x
n the vehicle lamps should be tched on. For example, the sensors not able to detect fog. To avoid ty risks, you should respond to e kinds of low-visibility situations witching the headlamps on manu-
.<
You can have the sensitivity of your vehicle's automatic head-
p control adjusted.<
lighting is switched on. For lighting on one side for parking as an additional feature, refer to page 104.
Low beams When the ignition is switched off while the low beams are on, the headlamps go out and only the
parking lamps (side marker lamps) remain on.
The reminder is provided by the Check Control, refer to page 87.
Daytime driving lamps* The headlamps are automatically switched on for daytime driving in ignition key position 2.
Aut
low amb as w
swi hea call
the whe swi are
lam
104nInstrument lighting High beams/Standing lamps Fog lamps
t fog lamps The green indicator lamp in the instrument cluster lights up to indicate that the front fog lamps
Fron
3 9 0 u s7
3 5
.
high beams are switched on, the mps go out.
If the automatic headlamp control is on, the low beams will come on atically whenever you activate g lamps.<
are on
If the fog la
autom the fo
Turn the rotary dial to adjust the illumi- nation intensity.
3 9 0 d
e7 3 3
1 High beams (blue indicator lamp)
2 Headlamp flasher (blue indicator lamp)
3 9 0 d
e7 2 2
3 Standing lamps
Standing lamps, left or right As an additional feature, you can illuminate your vehicle on either side for parking, if you wish to do so:
With the ignition key in position 0, push the lever in the appropriate direction. The lever engages in the turn signal indicator position.
105n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Interior lamps Reading lamps
an n
Re pa
ir s
Da ta
In de
x
to s
r .<
The interior lamps operate automati- cally.
Switching the interior lamps on and off manually
3 9 0 d
e6 3 8
The reading lamps are located in the front near the interior lamp. There are also reading lamps in the rear. They c be switched on and off with the butto (arrow) adjacent to each lamp.
3 9 4 d
e3 0 1
Press the button (arrow) briefly.
If you want the interior lamps to remain off all the times, press and hold the button for approx. 3 seconds.
Press the button briefly to revert to normal operation.
The lamp in the sport wagon's cargo area operates the same way.
To avoid subjecting the battery excessive loads, all of the lamp
within the vehicle are automatically switched off approx. 15 minutes afte you turn the ignition key to position 0
106nAir conditioning
rd the indows
body
ion
5 Airflow for the upper body area in the rear seat 108
6 Temperature 107
7 Air distribution 107
r supply 107
ar window defroster 107
ooling 107
circulated-air mode 107
1 Airflow directed towa windshield and side w
2 Airflow for the upper area 108
3 Footwell ventilation
4 Rear footwell ventilat
3 9 0 u s7
4 2
8 Ai
9 Re
10 C
11 Re
107n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Air conditioning
irculated-air mode You can respond to unpleasant odors in the sur-
nding environment by using this e to temporarily suspend the flow utside air into the vehicle's interior. system then recirculates the air ently within the vehicle.
ur vehicle is equipped with a multi- tion steering wheelfeaturing a
rculated-air button then you can select the recirculated-air mode this location (refer to page 22).
If the windows should fog over in the recirculated-air mode, switch
r
d. g air
Rec
rou mod of o The curr
If yo func reci also from
Re pa
ir s
Da ta
In de
x
recirculated-air mode off and ease the air supply as required.<
ra- le. d
the incr
Temperature The graduations on the dial provide general reference values for the interior temper- ature. We recommend 70 7
(22 6) as a comfortable setting. When you start the vehicle, this system adjusts the air to the selected tempera- ture as quickly as possible, and then maintains that temperature constantly.
Air distribution You can direct the emerging air toward the windows , toward your upper body or into the footwell . All inter-
Rear window defroster The indicator lamp comes on to indicate that the rea
window defroster is in operation. The rear window defroster switches off automatically.
Cooling The air conditioning cools and dehumidifies the
incoming air before reheating it to the selected temperature. Depending on the weather, the windshield may fog over briefly when the engine is starte You can reduce condensation formin on the windows by switching on the
mediate settings are also available. In the setting, there is a low flow of air onto the windows to keep them free of condensation.
Air supply You can control the emerging air's flow rate through an infi- nitely-variable range. The heating and ventilation
become more and more effective as the air supply settings are increased. In the "0" setting, the blower and climate con- trol are switched off and the outside air supply is blocked.
conditioning.
Condensation forms in the air conditioning system during ope
tion, which then exits under the vehic Traces of condensed water of this kin are thus normal.<
108nAir conditioning
frost windows and remove ensation e the rotary temperature dial to set system for an interior tempera-
To de cond 1. Us
the
3 9 0 u s7
1 0
that you find comfortable, such 70 7 (22 6) the air distribution rotary dial
the blower/air supply rotary dial pletely to the right
se the vent outlets in the rear ting area itch on the rear window defroster efrost the rear window.
-
ture as
2. Set to
3. Set com
4. Clo sea
5. Sw to d
Draft-free ventilation You can adjust the vent outlets for the upper body area for optimal personal comfort:
3 9 0 d
e6 8 5
Rear passenger area ventilation 1 Rotary dial for opening and closing
the vent outlets through an infinitely variable range
3 9 0 d
e6 8 7
1 Rotary dials for opening and closing the vent outlets through an infinitely- variable range
2 Levers for adjusting airflow direction
3 Rotary dial allows you to control the temperature of the airflow as desired: >Turn toward blue colder >Turn toward red warmer.
2 Levers for selecting airflow direction.
The air that flows out here is somewhat cooler than the air delivered to the foot well.
Microfilter The microfilter removes dust and pollen from the incoming air. Your BMW center will replace it during routine maintenance. A substantial reduction in airflow indicates that the filter needs to be replaced early.
109n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Automatic climate control*
Re pa
ir s
Da ta
In de
x
ard the wind- dows
r body
4 Rear footwell ventilation
5 Airflow for the upper body area in the rear 113
6 Automatic air distribution 111
Individual air distribution 111
Temperature control left-hand side 111
Display for temperature and air supply 111
1 Airflow directed tow shield and side win
2 Airflow for the uppe area 113
3 Footwell ventilation
3 9 0 u s7
4 3
7
8
9
110nAutomatic climate control*
and
12 Air conditioning 112
13 Automatic recirculated-air control (AUC) 112
14 Rear window defroster 112
r supply 111
aximum cooling 112 sidual heating mode 113
r grill for interior temperature nsor please keep clear and obstructed
15 Ai
16 M Re
17 Ai se un
10 Temperature control right-hand side 111
11 To defrost windshield windows 111
3 9 0 u s7
4 3
111n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Automatic climate control*
upply AUTO appears in display 9, while the AUTO
am automatically controls the flow oming air, refer to overview on 109. You can use "+" and "" to he airflow. When your setting is yed by bars, the automatic airflow tched off. Automatic air distribu- aintains its setting. You can reac-
the automatic airflow by pressing UTO button.
you press "" during operation at um blower speed all displays are led: the blower, heating and air tioner are switched off. The out- ir supply is deactivated. By ing any button of the automatic te control (except the MAX 16), you can switch the system
on.
frost windows and remove ensation
This program quickly
Air s
progr of inc page vary t displa is swi tion m tivate the A
When minim cance condi side a press clima button back
To de cond
Da ta
In de
x
removes ice and conden- from the windshield and the side ws.
sation windo
Tips for pleasant driving Use the automatic system, that is, press AUTO button 6. Select an interior temperature that you find comfortable.
Detailed setting options are described for you in the following section.
Your BMW center can program the settings of your vehicle in such
a manner that, when you unlock the vehicle with your individualized key, your own personalized setting for the automatic climate control is initiated.<
Automatic air distribution
Individual air distribution You can cancel the AUTO program by selecting specific distribution patterns to suit your own individual requirements. While the
AUTO program is then deactivated, the automatic airflow control remains in operation. The system directs air to the windows , the upper body and into the footwells . You can reacti- vate the automatic air distribution mode by selecting the AUTO button.
Temperature You can make individual
assumes the adjustment of the air distribution and the air supply for you and also adapts the temperature to external influences (summer, winter) to meet preferences you can specify.
temperature settings on the driver's side or the front
passenger side. Your selection appears in display 7. The numbers that appear in the display are reference figures for interior temperature. We recommend a setting of 72 7 (22 6) for a congenial interior climate, even when the air con- ditioner is in operation. When you start the vehicle, the system ensures that the selected temperature is achieved as quickly as possible. It then maintains this temperature, regardless of the season.
112nAutomatic climate control*
ending on the air quality, the omatic system then switches back forth between outside air supply recirculation of the air within the icle ht-hand indicator lamp on: the of external air into the vehicle is
manently blocked. The system n recirculates the air currently in the vehicle.
have a multifunction steering l with the recirculated-air button to page 22), you can also use it to between "Off" and the recircu-
air mode or AUC and the recircu- air mode.
If the windows should fog over in the recirculated-air mode, switch circulated-air mode off and se the air supply as required.<
-
-
Dep aut and and veh
>Rig flow per the with
If you whee (refer switch lated- lated-
the re increa
Rear window defroster When the rear window defroster is activated, the
tor lamp comes on. The rear w defroster switches off automat-
indica windo ically.
Air conditioning The air is cooled and dehumidified and
depending on the temperature setting warmed again when the air conditioning is switched on. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce condensation forming on the windows by switching on the air conditioning.
Condensation forms in the air conditioning system during opera-
tion, which then exits under the vehicle. Traces of condensed water of this kind
Maximum cooling With the engine running this program provides
maximum cooling at outside tempera- tures above approx. 41 7 (5 6).
60 7 (16 6) appears in the tempera- ture display 9, and the system reverts to the recirculated-air mode while simulta neously providing maximum airflow through the vent outlets only. That is why you need to keep these open if you select this program.
Automatic recirculated-air control (AUC)
are thus normal.< You can respond to unpleasant external odors
by temporarily stopping the flow of out side air. The system then recirculates the air currently within the vehicle. Press the button repeatedly to run through the following control sequence:
> Indicator lamps off: outside airflow operational
>Left-hand indicator lamp on AUC mode: the system recognizes pollut- ants in the outside air and blocks the flow of air when necessary. The system then recirculates the air cur- rently within the vehicle.
113n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Automatic climate control*
passenger area ventilation ary dial for infinitely-variable ning and closing of the vent out-
ector levers for airflow direction
rotary dial operates in the same as the front dial to adjust the perature of the emerging air.
:
Rear 1 Rot
ope lets
2 Sel
3 The way tem
3 9 0 d
e6 8 6
Da ta
In de
x
Residual heating mode The heat which is stored in the engine is utilized for
heating the interior when the engine has been switched off (while waiting at a railroad crossing, for instance).
In ignition key position 1, you can alter the settings of the automatic climate control. In ignition key position 0, the system automatically directs heated air to the windshield, side windows and footwells.
This function is available for oper- ation when the outside tempera-
ture is below approx. 59 7 (15 6),
Draft-free ventilation You can adjust the vent outlets for the upper body area completely for your personal comfort:
3 9 0 d
e6 8 5
with the engine warm from recent oper- ation and an adequate charge in the battery. The LED on the button will light up when all conditions have been met.<
1 Rotary dials for infinitely-variable opening and closing of the vent out- lets
2 Selector levers for airflow direction
3 Rotary dial allows you to control the temperature of the airflow as desired >Turn toward blue colder >Turn toward red warmer.
114nAutomatic climate control* Roller sun blind* Parked-car ventilation*
ystem allows you to ventilate the r and lower its temperature using ower of the automatic climate l.
arked-car ventilation system is ted via the Multi-Information Dis- MID) refer to page 92 or the rd computer. Refer to the sepa- wner's Manual.
an set two different times for the to start; it will remain active for
nutes. You can also turn it on and ectly. Since the system uses a antial amount of electrical current, hould not activate it twice in suc- n without allowing the battery to
This s interio the bl contro
The p opera play ( onboa rate O
You c system 30 mi off dir subst you s cessio
harged in normal operation en use.
arked-car ventilation system is ble for timer-controlled operation side temperatures above 60 7 ) as well as for manual operation temperature, provided that the
le is stationary.
ir emerges via the vent outlets for per body. Therefore, the vent
s must be open for the system to te.
be rec betwe
The p availa at out (16 6 at any vehic
The a the up outlet opera
Microfilter, activated-charcoal filter The microfilter removes dust and pollen from the incoming air. The activated- charcoal filter provides additional protection by filtering gaseous pollut- ants from the outside air. Your BMW center replaces this combined filter as a standard part of your scheduled main- tenance. A substantial reduction in air- flow indicates that the filter must be replaced before scheduled mainte- nance. To operate, press the button briefly with
the ignition key in position 1 or 2.
Sun blinds for rear side windows* 3 9 0 u s7
3 0
Use the strap to extract the blinds, then hook them in the attachment provided.
115n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
ecking for the conversion code rder to determine whether the orig- hand-held transmitter is equipped a conversion-code system, you either refer to the instructions for original hand-held transmitter or gram a channel key as described in left column on page 116 under gramming."
owing that, press and hold the pro- med channel key of the BMW Uni-
al Transmitter. If the indicator lamp he BMW Universal Transmitter hes rapidly for two seconds and stays on continuously, the original
d-held transmitter is equipped with
BMW Universal Transmitter*
The concept The BMW Universal Transmitter replaces up to three hand-held transmit- ters to control different devices such as a garage door opener, alarm systems or a door locking system. The BMW Uni- versal Transmitter recognizes and "learns" the transmitted signal from each of the original hand-held transmitters.
The signal of an original hand-held transmitter can be programmed on one of the three channel keys. Following that, each of the devices can be actu- ated with the appropriately-programmed channel key. The indicator lamp flashes to confirm transmission of the signal.
To Canadian residents: During programming, your hand-
held transmitter may automatically stop transmitting after two seconds. This may not be long enough to program the BMW Universal Transmitter. If you are programming from one of these hand- held transmitters, the Universal Trans- mitter's lamp may begin to flash in a series of double flashes. If this occurs, continue to hold the key on the Uni- versal Transmitter while you reactivate your hand-held transmitter. You may have to repeat this function several times while programming.<
Before programming, read the
Re pa
ir s
Da ta
In de
x
nversion-code system. If the con- ion-code system is available, pro- the channel keys as described in
right-hand column on page 116 er "Programming a hand-held trans- er with change code."
If you have additional questions, please consult your BMW center
all 1-800-355-3515.<
Before you sell your vehicle, the pro- grammed channel keys should be cleared. Refer to page 117 for the description of this process.
To prevent potential injuries or damage during the programming
operation and before every remote trig- gering of a programmed device using the BMW Universal Transmitter, be sure that there are no persons, animals or objects within the range of movement of the respective device. Also, comply with the safety precautions of the orig- inal hand-held transmitter.<
"User's information" section on page 117.<
The original hand-held transmitte If this symbol is depicted on the packaging or in the user's instructions for the original
hand-held transmitter, it may be assumed that this original hand-held transmitter is compatible with the BMW Universal Transmitter.
r
Ch In o inal with may the pro the "Pro
Foll gram vers of t flas then han a co vers gram the und mitt
or c
116nBMW Universal Transmitter*
ramming a hand-held mitter with conversion code Read and comply with the safety precautions on page 115.<
lt the operating instructions for dividual device when program- the BMW Universal Transmitter. and comply with the following amming instructions for the use of MW Universal Transmitter with a rsion-code system:
A second person simplifies pro- gramming of the BMW Universal mitter.<
f
Prog trans
Consu the in ming Read progr the B conve
Trans
-
Programming 1 Channel keys
2 Indicator lamp
3 9 0 d
e6 4 0
3. Hold the original hand-held trans- mitter at the receiver 3 a maximum o 2 in (5 cm) away
4. Simultaneously press the transmit- 3 8 0 d
e7 1 2
3 Receiver for programming
Read and comply with the safety precautions on page 115.<
1. Ignition key in position 2 2. For initial operation: press and hold
the two outer keys 1 until the indi- cator lamp 2 flashes. Release the keys. The three channel keys are cleared
ting key of the original hand-held transmitter (arrow 2) and the desired channel key of the BMW Universal Transmitter (arrow 1). Release both keys as soon as the indicator lamp flashes rapidly
5. To program other original hand-held transmitters, repeat steps 3 and 4.
The corresponding channel key is now programmed with the signal of the orig inal hand-held transmitter.
117n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
BMW Universal Transmitter*
r's information not use this BMW Universal Trans- er with any garage door opener that s safety "stop" and "reverse" fea- s as required by federal safety stan-
ds (this includes any garage door ner model manufactured before il 1st, 1982).
device complies with Part 15 of the Rules. Operation is subject to the wing two conditions: his device may not cause harmful
rference, and his device must accept any inter- nce received, including interference may cause undesired operation.
y
ys e in
el
s,
Use Do mitt lack ture dar ope Apr
This FCC follo (1) T inte (2) T fere that
Da ta
In de
x
1. Program the BMW Universal Trans- mitter as described above under "Programming" on the previous page
2. Press and hold the programming key on the receiver of the device for about two seconds or until the pro- gramming lamp on the device comes on
3. Press the desired channel key of the BMW Universal Transmitter three times.
If you have additional questions, please consult your BMW center.<
Clearing the channel keys Read and comply with the safet precautions on page 115.<
The memory of individual channel ke cannot be deleted. However, the thre channel keys can be cleared together the following manner:
>Press and hold the two outer chann keys of the BMW Universal Trans- mitter until the indicator lamp flashe and then release the keys.
All of the channel keys are cleared.
118nGlove compartment Storage compartments
over of the storage compartment vertical surface of the center le can be pushed open or closed ation). If your vehicle is equipped
The c on the conso (illustr
3 9 0 d
e7 3 9
cassette holder*, open each tte compartment by pressing on all button.
ge compartment on the center le between the front seats: to reach into the recess at the front ull upward.
ill find a coin holder in the door t on the driver's side.
ill find additional storage com- ents in all of the doors as well as backrests of the front seats.
with a casse the sm Stora conso open, and p
You w pocke
You w partm on the
To open Pull the handle and the lamp comes on.
To close
3 9 0 d
e7 3 8
To lock Use one of the master keys. A master key is also required for unlocking.
For example, if you turn over only your door and ignition keys for
valet parking (refer to page 32), access to the glove compartment is not pos- sible.<
Rechargeable flashlight* Located on the left-hand side of the glove compartment. Features integral overload-protection, so it can be left in its holder continu- ously.
Fold the cover up.
To prevent injury in the event of an accident, close the glove com-
partment immediately after use.<
To avoid completely discharging and possibly damaging the lamp,
always ensure that the flashlight is switched off before inserting it in the socket.<
119n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cellular phone* Beverage holder* Ashtray, front
empty ss the edge of the lid (arrow): ashtray moves up and can be oved.
- To Pre The rem
3 9 0 d
e7 4 2
Re pa
ir s
Da ta
In de
x
vehicles equipped with a non- ker's package, the insert is oved in the same way.
On smo rem
Hands-free system On vehicles with telephone prepara- tion*, the hands-free speaker is posi- tioned in the headliner.
3 9 0 d
e6 3 9
Two holders for canned drinks have been provided in the front center con sole (illustration).
Press to open; fold back inward to
3 9 0 u s7
3 6
For further information on the cellular phone, refer to the separate Owner's Manual.
close.
120nCigarette lighter* Ashtray, rear
pty the edge of the cover (arrow). shtray moves up and can be ed.
f
To em Press The a remov
3 9 0 d
e7 4 4
Press the cover panel for access (arrow), then push the lighter down.
You can remove the lighter from its socket for use as soon as it snaps back
3 9 0 u s7
3 7
Cigarette lighter socket This socket is suitable for attaching power supplies for flashlights, car vacuum cleaners and other appliances up to a rating of approx. 200 watts at 12 volts. Avoid damage to the socket caused by inserting plugs of different shapes or sizes.
Another socket is located in the cargo area of the sport wagon in the middle o the right-hand side panel.
Non-smoker's equipment package On vehicles with the non-smoker's
out.
Hold or touch the hot cigarette lighter by the knob only. Holding
or touching it in other areas could result in burns. The cigarette lighter remains opera- tional when the ignition key has been removed. For this reason, do not leave unsuper- vised children in the vehicle.<
equipment package, the socket is con- cealed by a cover.
For access to the socket: lift off the cover.
121n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Through-loading system*
h a master key, you can lock each krest in the rear seat.
also prevents access to the lug- e compartment from the interior of
al
s,
Wit bac
This gag
3 9 4 d
e7 4 7
Re pa
ir s
Da ta
In de
x
vehicle if you turn over only your r and ignition key 3 (refer to e 32), for valet parking.
k- t
the doo pag
Fold the rear backrests down Reach into the recess and pull forward (arrow 1).
When you close the backrest, be sure
3 9 4 d
e7 4 5
The central safety belt has an addition small buckle.
> If you connect the two belt section you can use the central belt as any
3 9 4 d
e7 4 6
that the catch engages securely. The red slide (arrow 2) must go underneath.
normal 3-point belt > It is easier to fold the rear-seat bac
rest up and down if you disconnec the belt (arrow).
122nSki bag*
lling the center armrest the armrest into position from , then apply pressure until you t snap into position.
When removing and installing the center armrest, be sure that the overs are not damaged by the ins.<
Insta Guide above hear i
seat c side p
The ski bag allows the safe and clean transport of up to 4 pairs of standard skis or up to two snowboards.
The length of the ski bag and the addi- tional space provided in the luggage compartment make it possible to carry skis with a length of up to 6.8 ft (2.10 meters). Because of the tapered shape of the bag, the ski bag can only accommodate two pairs of skis with a length of 6.8 ft (2.10 meters).
Removing the center armrest (Not for vehicles with the through- loading system and for the sport wagon, refer to page 124.)
3 9 4 d
e7 4 8
1. Fold the center armrest completely outward
2. Loosen the trim from the upper Velcro fastener and place it on the armrest
3. Grasp the front of the armrest with one hand, then use your other hand to reach down behind the armrest and pull up sharply (arrow).
123n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Ski bag*
uring the load Secure the bag's contents by tightening down the retaining
p at the buckle.<
ch ce he
Sec
stra
5 3 0 d
e2 8 4
Re pa
ir s
Da ta
In de
x
se ensure that the skis are clean re loading them into the bag. Take to avoid damage from sharp es.
ve
d .<
Plea befo care edg
Loading 1. Press the release button (arrow 1) to
unlock the cover panel in the luggage compartment
3 9 4 d
e7 4 9
4. Use the magnetic retainers to atta the cover panel to the upper surfa (metal surface below rear tray) of t luggage compartment.
3 9 4 d
e7 5 0
2. Press the detent levers (arrows 2) inward and fold the cover to the front
3. Extend the ski bag between the front seats. The zipper provides conve- nient access to the inside of the bag, and can also be left open to promote drying
To store the ski bag, perform the abo steps in reverse sequence.
An unsecured ski bag could lea to loss of vehicle control and in
case of an accident to personal injury
124nSki bag*
With through-loading system 1. Fold the center armrest outward.
Loosen the trim from the upper Velcro fastener and place it on the
3 9 4 d
e7 5 1
In the sport wagon 1. Fold the center armrest outward.
Loosen the trim from the upper Velcro fastener and place it on the
3 9 2 d
e7 5 2
armrest 2. Press button 1 downward and swing
the cover forward 3. Press knob 2: the cover in the lug-
gage compartment is unlocked.
armrest 2. Press button 1 downward and swing
the cover forward 3. Press button 2: the cover in the
cargo area is unlocked.
125n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
at a
Cargo area sport wagon
tition net out the partition net by the strap hold the bar firmly in the other d. Then grasp the bar on both sides, it up and engage it in the holders. It asiest to do this from the back seat.
Do not allow the partition net to snap back. Doing so could pose a
of injury and the partition net could amaged.<
en the rear backrests are folded n, you can store the case in front of
-
r
Par Pull and han pull is e
risk be d
Wh dow
3 9 2 d
e1 6 3
D In
de x
rear seats, pull the partition net out there and insert it in the front ers (refer to the next page).
the from hold
Fold the rear backrests down Reach into the recess and pull upward (arrow).
The rear backrest is divided into two
3 9 2 d
e7 5 3
Roll-up cover Pull the roll-up cover out and hook it into the rear bracket.
The cover will support light objects
3 9 2 d
e7 5 4
sections (one-third and two-thirds of the width of the seat). You can fold either section of the backrest down separately in order to increase the capacity of the cargo area.
When you close the backrest, be sure that the catch engages
securely. The red warning indicator dis- appears in the recess when the retainer is locked. The center safety belt can be retracted only when the larger backrest is engaged.<
such as items of clothing.
Do not place heavy or bulky objects on the roll-up cover,
otherwise, they could endanger occu pants while braking hard, during eva- sive maneuvers, or in an accident, fo example. Do not allow the cover to snap back, since this could damage it.<
For storing the case, refer to the next page.
126nCargo area sport wagon
covers the side covers by pressing the .
Side Open button
3 9 2 d
e7 7 8
Removing the roll-up cover and partition net 1. Press on the buttons (arrow 1) to
release the case on both sides
3 9 2 d
e7 5 5
Storage There are holders for the case in front of the rear seats.
3 9 2 d
e1 6 5
2. Holding the case straight, pull out to the rear (arrow 2).
Installation Simply slide the case forward in the two side holders until it engages.
Guide the case in from the side as shown in the illustration. The strap of the partition net must be directed upward, while the end of the roll-up cover must be laid around and under the case to the rear.
You can pull the partition net out and insert it in the holders above it in the upper roof area.
127n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
a
Cargo area sport wagon
d up the spare tire cover up the cover and hook it into the red iner on the floor panel (arrow).
ore you fold the cover down, return retainer to its original position.
r
,
Fol Lift reta
Bef the
3 9 2 d
e1 6 9
Da t
In de
x
Floor compartment To release: press the handle in the recess and fold the cover upward on the handle (large arrow).
3 9 2 d
e7 7 9
Fold the floor panel up Lift up the black retainer on the lowe side of the panel and hook it into the upper frame of the tailgate cutout.
3 9 2 d
e1 6 8
You can lock the cover with a master key.
The dividers in the compartment can be rearranged. If you remove the divider and turn the divider retainer to the left and remove it, you have a level storage compartment.
Before you fold the floor panel down return the retainer to its original posi- tion.
128nCargo area Cargo loading
ring the load ure smaller, light pieces with the ining straps or a luggage net*, or
Secu >Sec
reta
3 9 2 d
e1 7 8
elastic straps (refer to page 42) large, heavy pieces, visit your W center for load-securing ices*. Lashing eyes are provided he corners of the luggage com- tment/cargo area for attaching se load-securing devices (the tration shows the sport wagon) d and comply with the informa- enclosed with the load-securing ices.
use >For
BM dev at t par the illus
>Rea tion dev
Raise the cargo floor For access to the compartment under the floor or to the spare tire, etc.:
3 9 2 d
e7 5 6
Stowing cargo When transporting loads in your BMW:
>Position heavy loads as far forward
3 9 2 d
e1 7 7
>Raise the cargo floor and secure it with the support rod (arrow)
>Open the quick-release fasteners on the spare tire cover.
as possible directly behind the backrests or the luggage compart- ment partition panel and at the bottom (the illustration shows the sport wagon)
>Cover sharp edges and corners >Do not pile objects higher than the
top edge of the backrest >Pull out the partition net* (refer to
page 125) and ensure that carried items cannot pass through the parti- tion net
>For very heavy loads when the rear seat is not occupied, secure each safety belt in the opposite buckle.
129n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Cargo loading Roof-mounted luggage rack
should therefore always remember to exceed the approved roof ght, the approved gross vehicle ght or the axle loads when loading rack. You will find the specifications er "Technical data" on page 173.
e sure that the load is not too bulky, attempt to distribute it evenly. ays load the heaviest pieces first (on bottom). Ensure that adequate room ains for the tilt sunroof to extend ard and that no objects protrude the tailgate's travel range on the rt wagon.
Always ensure that roof-mounted loads are tightly secured, as loose
le
You not wei wei the und
Mak and Alw the rem upw into spo
Re pa
ir s
Da ta
In de
x
s can shift or even fly off the roof, ing a serious hazard for following fic.<
e smoothly and avoid sudden eleration and braking. Do not corner igh speeds.
se
e
's
load pos traf
Driv acc at h
Always position and secure the load correctly. If you do not, it can
endanger the passengers during braking or evasive maneuvers. Do not exceed the approved gross vehicle weight or the permissible axle loads (refer to page 173). If you do, the operating safety of the vehicle is no longer ensured and you are in violation of the law. Do not carry hard or heavy objects unsecured in the passenger compart- ment. If you do so, they may be pro- jected through the air during braking and evasive maneuvers, thus endan- gering vehicle occupants.<
A special roof-rack system is availab as an optional extra for your BMW. Please observe the precautions included with the installation instruc- tions.
3 9 4 d
e7 5 7
Anchorages Access to the anchorages: To fold up the cover (arrow), please u the tool provided with the roof-rack system.
Loading and driving notes Roof-mounted luggage racks raise th center of gravity of the vehicle when they are loaded. For this reason, they exercise a major effect on the vehicle handling and steering response.
130n
131n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Mainte-
132nBreak-in procedures
e system x. 300 miles (500 km) must
e before the brake pads and achieve the optimal pad-surface ear patterns required for trouble- peration and long service life later
ak-in the separate parking brake , apply the parking brake lightly
coasting to a standstill (at a traffic l, for instance), provided that conditions allow you to do so. oid corrosion, repeat this proce- rom time to time.
The brake lamps do not come on
-
Brak Appro elaps rotors and w free o on.
To bre drums when signa traffic To av dure f
when the parking brake is applied. m for the brake system servo unit
ur BMW is available only when the e is running. When you move the le with the engine switched off towing, for instance substan- igher levels of pedal force will be ed to brake the vehicle.<
h lutch will also begin to function ally after about 300 miles m). Engage the gears carefully the break-in period.
Vacuu on yo engin vehic when tially h requir
Clutc The c optim (500 k during
To ensure that your vehicle provides maximum economy throughout a long service life, we request that you observe the following suggestions.
Engine and differential Up to 1,200 miles (2,000 km): Drive at varying engine speeds and road speeds, but do not exceed 4,500 rpm and the following road speeds during this initial period:
BMW 525i, 530i: 100 mph (160 km/h) BMW 540i: 106 mph (170 km/h).
Comply with all official speed limits.
Refrain from using full throttle and avoid
Tires Owing to technical factors associated with their manufacture, tires do not achieve their full traction potential until an initial break-in period has elapsed. For this reason, you should drive with extra care during the initial 200 miles (300 km).
Comply with all official speed limits.
When the vehicle is operated on wet or slushy roads, a wedge of
water may form between the tire and the road surface. This phenomenon is referred to as aquaplaning or hydro- planing, and can lead to partial or com
pressing the accelerator beyond the kickdown point.
Once you have driven 1,200 miles (2,000 km), engine and vehicle speeds can gradually be increased.
You should also comply with these break-in procedures if the engine or dif- ferential is replaced later in the course of the vehicle service life.
plete loss of traction, vehicle control and braking effectiveness. Reduce your speed on wet roads.<
133n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Driving notes Antilock Brake System
concept Antilock Brake System (ABS) keeps wheels from locking during braking, eby enhancing active driving safety.
h ABS, the shortest possible braking ances are achieved under most ditions (on straight-aways and in es, on asphalt, ice, wet road sur- s, etc.).
king with ABS u are in a situation that requires full
king, you will exploit the full benefits he ABS system if you apply max- m pedal pressure ("panic stop").
ation at the brake pedal combined
n
a-
s r's
or
The The the ther
Wit dist con curv face
Bra If yo bra of t imu
Puls
Re pa
ir s
Da ta
In de
x
sounds from the hydraulic circuits cates to the driver that ABS is in its ve mode.
with indi acti
Brakes: Do not drive with your foot resting
on the brake pedal. Even light but con- sistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure. Hydroplaning: When driving on wet or slushy roads, reduce vehicle speed. If you do not, a wedge of water may form between the tires and the road surface. This phe- nomenon is referred to as aquaplaning or hydroplaning. It is characterized by a partial or complete loss of contact between the tires and the road surface. The ultimate results are loss of steering and braking control.
Rear parcel tray: Do not place heavy or hard objects o the rear parcel tray. These objects could endanger vehicle occupants during heavy brake applications or ev sive maneuvers. Clothes hooks: Hang items of clothing from the hook so that they will not obstruct the drive vision. Do not hang heavy objects on the hooks. If you do so, they could cause personal injury during braking evasive maneuvers.<
Driving through water: When there is water on the roads, do not drive in it if it is deeper than 1 ft (30 cm), and even then, only at walking speed, otherwise the vehicle can sustain damage to the engine, the electrical systems and the transmission.
134nBrake system
descending steep hills and ded grades, downshift to a gear ill allow you to continue safely nly a minimal amount of braking. nimizing the loads placed on the system, this strategy helps e that optimal brake system nse will remain available at all .
Do not coast with the clutch depressed or with the transmission ector lever in Neutral. Do not coast he engine switched off. The engine es no braking effect when the is depressed and there is no
When exten that w with o By mi brake ensur respo times
or sel with t provid clutch
r-assist for braking or steering the engine is not running. allow floor mats, carpets or any objects to protrude into the area d the accelerator, clutch and brake s and obstruct their movement.<
e pads For your own safety: use only brake pads that BMW has ved for your particular vehicle l. BMW cannot evaluate non- ved brake pads to determine if re suited for use, and therefore t ensure the operating safety of hicle if they are installed.<
powe when Never other aroun pedal
Brak
appro mode appro they a canno the ve
Brake fluid level If the brake fluid level is too low and brake pedal travel has become notice- ably longer, there may be a defect in one of the two brake system's hydraulic circuits.
Proceed to the nearest BMW center. Higher brake application
pressure may be necessary under these conditions, and the vehicle may exhibit a slight tendency to pull to one side when the brakes are applied. Braking distances may also be longer. Please remember to adapt your driving style accordingly.<
Disc brakes Limited vehicle use, extended periods with the vehicle parked or in storage, and operating conditions in which braking is restricted to gentle, low- pressure applications will all increase the tendency for corrosion to form on the rotors; this is often accompanied by a simultaneous accumulation of con- tamination on the brake pads. The pads must exert a certain minimal level of pressure against the rotors for the disc brakes' inherent self-cleaning effect to remain effective; the pressure available under the above conditions may not provide adequate cleansing.
If the brake rotors are corroded, they will tend to respond to braking with a pulsating effect that even extended brake applications will fail to cure.
When driving in heavy rain and on wet roads it is a good idea to apply light pressure to the brake pedal every few miles. Monitor traffic conditions to ensure that this maneuver does not pose a hazard to you or to other road users. The heat generated in this pro- cess helps dry the pads and rotors to ensure that your brake system will respond with undiminished efficiency when you need it.
135n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
mm) these indicators, signal that tires have reached the legally per- sible wear limit.
Do not drive on a deflated (flat) tire. A flat tire greatly impairs
ring and braking response, and can to complete loss of control over vehicle. id overloading the vehicle so that permitted load on the tires is not eeded. Overloading leads to over- ting and causes damage inside the . The ultimate result can assume form of a sudden air loss. sual vibrations encountered during
mal vehicle operation can indicate a
Tire inflation pressure Tire condition
Information for your safety The factory-approved radial tires are matched to the vehicle and have been selected to provide optimum safety and driving comfort.
It is not merely the tire's service life, but also driving comfort and above all else driving safety which depend on the condition of the tires and the mainte- nance of the specified tire inflation pressure.
Incorrect inflation pressures are a frequent cause of tire problems
and flat tires. Tire pressure also has a major effect on your BMW's handling
Tire tread Tire damage Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the
39 0d
e3 31
Re pa
ir s
Da ta
In de
x
tire or some other vehicle malfunc- . The type of problem can be sed by contact with curbs, etc. This lso true for irregularities in the icle's handling characteristics, such pronounced tendency to pull to the or right. Should this occur, respond mmediately reducing your speed. ceed carefully to the nearest BMW ter or professional tire center, or e the vehicle towed in to have it, its els and tires inspected. damage (up to and including blow- ) can endanger the lives of both the
icle occupants and other road rs.<
response. We recommend that you check the tire pressure remember to check the spare tire as well before every extended trip, as well as at least every two weeks in normal use (refer to page 26). Failure to observe these pre- cautions can result in incorrect tire pressures, which cause instable han- dling response as well as tire damage, and can ultimately lead to an acci- dent.<
tread depth.
The tread depth should not drop below 0.12 in (3 mm), even though, for example the legally specified minimum tread depth in Europe is only 0.063 in (1.6 mm). Below a tread depth of 0.12 in (3 mm) there is an increased risk of hydroplaning, even at relatively mod erate speeds and with only small amounts of water on the road.
Tread wear indicators, refer to arrow, are embedded around the tire circum- ference in the base of the tire tread. Their locations are indicated on the tire sidewall with TWI Tread Wear Indi- cator. At a tread depth of 0.063 in
(1.6 the mis
stee lead the Avo the exc hea tires the Unu nor
-
flat tion cau is a veh as a left by i Pro cen hav whe Tire outs veh use
136nTire replacement
erature mperature grades are A (the
st), B and C, representing the resistance to the generation of nd its ability to dissipate heat
tested under controlled condi- on a specified indoor laboratory heel. ined high temperature can cause aterial of the tire to degenerate duce tire life, and excessive tem- re can lead to sudden tire failure.
rade C corresponds to a level of mance which all passenger car ust meet under the Federal
Car Safety Standard No. 109.
Temp The te highe tire's heat a when tions test w Susta the m and re peratu The g perfor tires m Motor
s B and A represent higher levels formance on the laboratory test l than the minimum required by
The temperature grade for this tire is established for a tire that is rly inflated and not overloaded. sive speed, underinflation, or sive loading, either separately or bination, can cause heat buildup
ossible tire failure.<
Grade of per whee law.
prope Exces exces in com and p
To maintain good handling and vehicle response, use only tires of a single tread configuration from a single manu- facturer. BMW tests wheel and tire combinations and approves them.
DOT Quality Grades Treadwear Traction AA A B C Temperature A B C
All passenger car tires must con- form to Federal Safety Require-
ments in addition to these grades.<
Treadwear
Traction The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on speci- fied government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
The traction grade assigned to this tire is based on straight-
ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction charac- teristics.<
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled condi- tions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual condi- tions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road char- acteristics and climate.
137n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Tire replacement Wheel and tire combinations
The factu side DOT man 2001
Altho serv stron all ti 6 ye
s ensure that all of the tires ted on the vehicle are the same , from the same manufacturer and he same tread pattern. If you have unt the spare tire in response to a e, etc., you should remount a tire correct specifications as soon as ble.<
The use of rims and wheel bolts that do not meet the specifica- of the original factory-installed ment will affect the safe operation r vehicle and may cause an acci- nd personal injury. mix tires of different design, such
t
- -
Alway moun series with t to mo flat tir of the possi
tions equip of you dent a Never
Re pa
ir s
Da ta
In de
x
el-belted radials with radial bias- or bias-ply tires, etc. Mixing tire
will adversely affect roadholding an lead to loss of vehicle con-
ge tires in a cool, dry place, pro- g them against light whenever ble. Protect the tires against con- ith oil, grease and fuel.
as ste belted types and c trol.<
Stora Store tectin possi tact w
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:
Treadwear 200 Traction AA Temperature A
Do not use retreaded tires, since driving safety may be impaired.
This is due to the possible variations in casing structures and, in some cases, to their extreme age, which can lead to a decrease in their durability.<
Tire age
The right choice Never mount wheels and tires tha have not been specifically
approved by BMW for use on your par- ticular model. Although other wheels and tires may theoretically have the same dimensions, variations in factors such as manufacturing tolerances can result in contact between tire and body work, ultimately leading to serious acci dents. If non-approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot be held liable for driving safety.<
BMW has tested certain tires for each
date on which the tire was manu- red is indicated by the code on the
wall: ... 2601 indicates that the tire was ufactured in Week 26 of the year .
ugh tires may have a theoretical ice life of up to 10 years, BMW gly recommends that you replace
res after an absolute maximum of ars.
tire size, rated them according to road safety and approved them. Your BMW center can inform you which tires have been tested in this way. Observe pos- sible national guidelines, e.g. regarding entry into vehicle documents.
The correct wheel and tire combi- nation affects different systems
such as ABS, ATC, ASC+T/DSC. The function of these systems is impaired if improper wheel and tire combinations are used.
138nSpecial characteristics of winter tires Snow chains*
narrow-link snow chains are ved exclusively for use in combi- with winter tires on the rear
ls only. Comply with all manufac- safety precautions when
ting the chains. Do not exceed a of 30 mph (50 km/h) while
g with mounted snow chains.
It is not possible to mount snow chains on tires with 17-inch ls.<
.
BMW appro nation whee turer's moun speed drivin
whee
Choosing the right tire BMW recommends winter tires (M+S radial tires) for operation under inclement winter driving conditions. While all-season tires (M+S designa- tion) provide better winter traction than summer tires with the load ratings H, V, W, Y and ZR, they generally do not achieve the performance of winter tires.
In the interests of safe tracking and steering response, install radial tires made by the same manufacturer and with the same tread configuration on all four wheels if you elect to mount winter tires.
Tire condition, tire inflation pressure Winter tires display a perceptible loss in their ability to cope with winter driving conditions once the tread wears to below 0.16 in (4 mm), and should thus be replaced.
Comply with the specified tire inflation pressures and be sure to have the wheel and tire assemblies balanced every time you change the wheels/tires
Do not exceed specified maximum speeds
Never exceed the maximum speed for which the winter tires
are rated. Unprofessional attempts by laymen to service tires can lead to damage and accidents. Have this work performed by skilled professionals only. Any BMW center has the required technical knowledge and the proper equipment and will be happy to assist you.<
139n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Hood
close w the hood to fall from a height bout 12 in (30 cm) so that it audibly ages.
To Allo of a eng
3 9 0 d
e7 6 1
Re pa
ir s
Da ta
In de
x
To avoid injuries, be sure that the travel path of the hood is clear
n it is closed, as with all closing cedures. u notice that the hood is not com- ely closed while driving, stop imme- ely and close it securely.<
whe pro If yo plet diat
To unlock Pull the lever located under the left- hand side of the instrument panel.
3 9 0 d
e7 5 9
To open Pull the release handle and open the hood.
3 9 0 d
e7 6 0
Do not work on your vehicle without appropriate skills. Failure
to work in an informed, professional manner when servicing components and materials constitutes a safety hazard for vehicle occupants and other road users. If you are not familiar with the guidelines, please have the opera- tions performed by your BMW center.<
140nEngine compartment essentials
id (under the ter) 145
3 Engine oil dipstick 142
4 Engine oil filler neck 142
5 Coolant expansion tank 144
ervoir for intensive-cleaning tem* 141
ervoir for windshield and dlamp washer system* 141
1 Reservoir for brake flu housing of the microfil
2 Auxiliary terminal for jump-starting 164
3 9 0 d
e7 9 1
6 Res sys
7 Res hea
141n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Washer fluids
Re pa
ir s
Da ta
In de
x
id.
W
le.
g- ey
Headlamp* and windshield washer system Capacity in US quarts (liters).
Windshield washer:
3 9 0 d
e7 6 2
Intensive-cleaning washer reservoir* Capacity approx. 1.1 US quarts (1.0 liter).
3 9 0 d
e7 6 3
approx. 3.7 (3.5) sedan approx. 6.3 (6.0) sport wagon
Incl. headlamp washing system: approx. 6.3 (6.0)
Fill with water and if required with a washer antifreeze (according to manu- facturer's recommendations).
We recommend that you mix the washer uid before adding it to
the reservoir.<
Fill with intensive-cleaning washer flu It resists freezing to approx. 177 (276) and is available from your BM center.
Antifreeze agents or intensive- cleaning washer fluids for the
washer systems are highly inflammab For this reason, keep them away from sources of flame and store only in ori inal containers. Store them so that th are inaccessible to children. Comply with the instructions on the con- tainers.<
142nEngine oil
ng engine oil you should wait until the level has ed to just above the lower mark adding oil, you should never
Addi While dropp before
3 9 0 d
e6 2 6
the oil level to fall below this
BMW engines are designed to operate without oil additives; the f additives could lead to damage e cases. This is also true for the
al transmission, the automatic ission, the differential, and the
r steering system.<
mendation: have the oil changed ur BMW center only.
allow mark.
use o in som manu transm powe
Recom by yo
Checking oil level 1. Park the vehicle on a level surface 2. Switch the engine off after it has
reached normal operating tempera-
3 9 0 d
e6 4 7
The oil volume between the two marks on the dipstick corresponds to approx. 1.1 US quarts (1 liter). Do not fill beyond the upper mark on the dipstick. Excess
4 6 0 d
e1 8 9
ture 3. After approx. 5 minutes, pull the dip-
stick out and wipe it off with a clean lint-free cloth, paper towel, or similar material
4. Carefully push the dipstick all the way into the guide tube and pull it out again
5. The oil level should be in between the two marks on the dipstick.
As with fuel economy, oil consumption is directly influenced by your driving style and vehicle operating conditions.
oil will damage the engine.
143n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
Engine oil
cosity ratings osity is the oilflow rating as estab-
ed in SAE classes.
selection of the correct SAE class ends on the climatic conditions in area where you typically drive your W.
Approved oils are in SAE classes 5W-40 and 5W-30.<
se oils may be used for driving in all ient temperatures.
-
s
h
ith
s
e
Vis Visc lish
The dep the BM
The amb
In de
x
Continuous exposure to used oil has caused cancer in laboratory
testing. For this reason, any skin areas that come into contact with oil should be thoroughly washed with soap and water. Always store oil, grease, etc., out of reach of children. Comply with all warning labels and information on lubri- cant containers.<
Comply with the applicable envi- ronmental laws regulating the dis-
posal of used oil.<
Specified engine oils The quality of the engine oil selected has critical significance for the opera tion and service life of an engine. Based on extensive testing, BMW ha approved only certain engine oils.
Use only approved "BMW High Performance Synthetic Oil."
If you are unable to obtain "BMW Hig Performance Synthetic Oil," you can add small amounts of synthetic oil in between oil changes. Only use oils w the API SH specification or higher.
Ask your BMW center for detail concerning the specific "BMW
High Performance Synthetic Oil" or "synthetic oils" which have been approved.<
You can also call BMW of North America at 1-800-831-1117 or visit th website: www.bmwusa.com to obtain this information.
144nCoolant
rt by turning the cap counter- ckwise. Pause to allow any accu- lated pressure to escape, then n e coolant is low, slowly add lant until the correct level is ched do not overfill.
Comply with the applicable envi- ronmental laws regulating the dis- of extended-duty antifreeze with sion inhibitor.<
1. Sta clo mu ope
2. If th coo rea
posal corro
Do not add coolant to the cooling system when the engine is hot. If
you attempt to do so, escaping coolant can cause scalds. To avoid the possibility of damage later on, never use anything other than fac- tory-approved, nitrite and amino-free extended-duty antifreeze with corrosion inhibitor. Your BMW center is familiar with the factory specifications. Antifreeze and anti-corrosion agents are hazardous to health. You should always store them in their original con- tainers and in a location which is out of reach of children. Extended-duty antifreeze with corro-
Checking coolant level and adding coolant Correct coolant level when the engine is cold (approx. 687/206):
3 8 0 d
e0 8 1
sion inhibitor contains the inflammable substance ethylene-glycol. For this reason, do not spill antifreeze with cor- rosion inhibitor on hot engine parts. It could catch fire and cause burns.<
Unscrew the cap from the expansion tank.
The coolant level is correct when the upper end of the red float is at least even with the upper edge of the filler neck (refer to the arrow in the illustra- tion), but no more than 0.8 in (2 cm) above it that is, up to the second mark on the float (refer also to the schematic diagram next to the filler neck).
145n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Brake fluid
is,
rs er- t
ut
e
Re pa
ir s
Da ta
In de
x
on
i- is-
The warning lamp for the brake system's hydraulic circuits comes on/the message "CHECK BRAKE FLUID" appears in the Check Control: brake fluid level too low.
To add brake fluid The brake fluid reservoir is located under the microfilter housing on the driver's side of the vehicle. For adding brake fluid or for determining and cor- recting the cause of brake fluid loss, consult your BMW center. Your BMW center is familiar with the specifications for factory-approved brake fluids (DOT 4).
Brake fluid is hygroscopic, that it absorbs moisture from the air
over time. In order to ensure the safety and reli- ability of the brake system, have the brake fluid changed every two yea by a BMW center. Refer also to the S vice and Warranty Information Bookle (US models) or to the Warranty and Service Guide Booklet (Canadian models). Brake fluid is hazardous to health and damages the vehicle's paint. You should always store it in its original container and in a location which is o of reach of children. Do not spill the fluid and do not fill th
Brake fluid loss may result in extended brake pedal travel. Should this occur, refer to the notes on page 134.
brake fluid reservoir beyond the MAX mark. The brake fluid could ignite up contact with hot engine parts and cause serious burns.<
Comply with the applicable env ronmental laws regulating the d
posal of brake fluid.<
146n
ce and Warranty Information let (US models) or Warranty ervice Guide Booklet
adian models) ditional information on mainte- intervals and procedures, please o the Service and Warranty Infor- n Booklet (US models) or the nty and Service Guide Booklet dian models).
recaution against corrosion, it is ble to have the body checked for
ge from rocks or gravel at the time, depending upon operating tions.
The BMW Maintenance System
The BMW Maintenance System has been designed as a reliable means of providing maximum driving and oper- ating safety and as cost-effectively as
3 9 0 u s7
0 2
Service Interval Display While conventional systems rely on dis- tance traveled alone to determine when service is due, the BMW Maintenance System has for years considered the actual conditions under which the vehicle operates, because mileage can be accumulated in very different ways.
From a maintenance standpoint, 62,000 miles (100,000 km) accumulated in short-distance urban driving are not the equivalent of the same distance covered at moderate speeds in long- distance highway travel.
The BMW Maintenance System
Have your BMW center do the maintenance and repair. re that all maintenance work is med in the Service and Warranty ation Booklet (US models) or in arranty and Service Guide et (Canadian models). entries will constitute your proof e vehicle has received regular
enance. They are also required in ent of a warranty claim.<
possible for you.
Please keep in mind that regular main- tenance is not only necessary for the safety of your vehicle, but also plays a significant role in maintaining its resale value.
includes the Engine Oil Service and Inspections I and II.
Determining the maintenance intervals according to the actual loads on the vehicle covers every kind of operating situation. However, even those who drive only short distances significantly less than 6,000 miles (10,000 km) annu- ally should have the engine oil changed at least every 2 years since oil deteriorates over time, regardless of use.
Servi Book and S (Can For ad nance refer t matio Warra (Cana
As a p advisa dama same condi
Be su confir Inform
147n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Technical modifications California Proposition 65 Warning
Light-emitting diodes (LEDs) Light-emitting diodes installed behind translucent lenses serve as the light source for many of the controls and dis- plays in your vehicle. The concept behind their operation is related to that employed for lasers, and they are offi- cially designated as Class 1 light-emit- ting diodes.
Do not remove the protective lens and avoid staring directly at the
unfiltered beam for extended periods (several hours), as inflammation of the iris could result.<
California laws require us to state the following warning:
Engine exhaust, some of its con- stituents, and certain vehicle com
ponents contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Battery posts, terminals and related accessories contain lead and lead compounds. Wash your hands after
Re pa
ir s
Da ta
In de
x
handling. Used engine oil contains chemicals that have caused cancer in laboratory ani- mals. Always protect your skin by washing thoroughly with soap and water.<
-
148nOBD interface socket
When the filler cap is not properly tightened, the OBD system can t the vapor leak and the indicator ht up. If the filler cap is subse- ly tightened, the indicator should t within a few days.<
detec will lig quent go ou
The Onboard Diagnostic (OBD) inter- face socket is located on the left of the driver's side at the bottom of the instru- ment panel and under a cover. The
3 9 0 u s7
3 9
An illuminated lamp informs you of the need for service, not of the need to stop the vehicle.
However, the systems should be checked by your BMW center at the earliest possible opportunity.
Under certain conditions, the indicator will blink or flash. This indicates a rather severe level of engine misfire. When this occurs, you should reduce speed and consult the nearest BMW center as soon as possible. Severe engine misfire over only a short period of time can seriously damage emission control components, especially the catalytic converter.
cover has the letters "OBD" on it.
The purpose of the OBD system is to ensure proper operation of the emis- sion control system for the vehicle's lifetime. The system monitors emis- sions-related components and sys- tems to detect deterioration and mal- function.
Service Engine Soon warning lamp for Canadian models.
149n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
150n
151n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Repairs
152n
* ld the wiper blade on the window remove/unclip the wiper arm at articulated joint (arrow)
Onboard tool kit Windshield wiper blades
Attached to the underside of the lug- gage compartment lid/tailgate. Unscrew the wingnut for access.
3 9 4 d
e0 8 0
Front 1. Pull the wiper arm up slightly and
hold it firmly 2. Press back the release (arrow) and
3 9 0 d
e7 6 6
ert a new wiper blade and press it clip it into the wiper arm.
Use only wiper blades approved by BMW.<
pull the wiper blade back toward the base of the wiper arm
3. Install the new blade and slide the release back into position.
Rear 1. Ho
and the
5 3 0 d
e3 0 1
2. Ins on/
153n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
urn the bulb holder to the left rrow) and remove emove and replace the bulb.
When cleaning the headlamps, please observe the following:
o not wipe dry (scratches). Never se abrasives or strong solvents to lean the covers emove dirt and contamination (such s insects) by soaking with BMW Car hampoo and then rinsing with plenty f water lways use a deicer spray to remove ccumulated ice and snow never se a scraper.<
1. T (a
2. R
>D u c
>R a S o
>A a u
Re pa
ir s
Da ta
In de
x
d-
The lamps and bulbs are essential fac- tors contributing to the safety of your vehicle. For this reason, you should follow the instructions below carefully when replacing a bulb. If you are not familiar with any of the procedures, consult your BMW center.
Do not touch the glass portion of a new bulb with your bare hands
since even small amounts of impurities burn into the surface and reduce the service life of the bulb. Use a clean cloth, paper napkin, or a similar mate- rial, or hold the bulb by its metallic base.<
The right side of the engine compart- ment.
1 Low beams
2 High beams 3 9 0 d
e7 6 7
A replacement bulb set is available from your BMW center.
Whenever working on the elec- trical system, switch off the elec-
trical accessory you are working on or disconnect the cable from the negative terminal of the battery. Failure to do this could result in short circuits. To prevent injuries and damage, comply with any instructions provided by the bulb manufacturer.<
For checking and adjusting hea lamp aim, please contact your
BMW center.<
Low and high beams H7 bulb, 55 watt
The bulb is pressurized. There- fore, you should always wear
safety glasses and protective gloves. Failure to observe these precautions can result in physical injury if the bulb breaks.<
154nLamps and bulbs
signal indicator/Parking s (side marker lamps) filament bulb, 21 watt
Turn lamp Dual-
3 9 0 d
e6 7 0
n the bulb to the left and remove move and replace the bulb.
1. Tur 2. Re
Xenon lamps* The operating life of these lamp units is extremely long and the likelihood of failure very low, provided that they are not switched on and off an excessive number of times. If one of these bulbs should nevertheless fail, it is possible to continue driving with great caution using the fog lamps, provided traffic laws in your area do not prohibit this.
Because of the extremely high voltages involved, any work on the
xenon lighting system should be carried out by technically-qualified personnel only. Otherwise, there is a risk of fatal
Standing lamps 10 watt bulb
The bulb holder and reflector are a 3 9 0 d
e6 6 9
injury.< single unit and are both changed at the same time.<
1. Turn the bulb holder with reflector to the left and remove
2. Disconnect the plug 3. Plug the new bulb holder into the
plug connector. Be sure that it is securely engaged
4. Insert the reflector with bulb holder and turn to the right as far as possible.
155n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
oosen both screws (arrows) ake off the cover panel next to the eadlamp urn the headlamp 903 to the left and emove it by bringing it toward the
2. L 3. T
h 4. T
r
3 9 0 d
e6 7 2
Re pa
ir s
Da ta
In de
x
ont isconnect the plug urn the lamp to the left and remove .
ro- se ry
w)
fr 5. D 6. T
it
Side turn signal indicators 5 watt bulb
1. Use finger pressure against the rear end of the lens (arrow) to press it for-
3 9 0 d
e7 6 8
Front fog lamps H8 bulb, 35 watt
The bulb is pressurized. There-
3 9 0 d
e6 7 1
ward for removal 2. Press gently on the bulb and turn it to
the left to remove it.
fore, wear safety glasses and p tective gloves. Failure to observe the precautions can result in physical inju if the bulb breaks.<
1. Using a screwdriver, remove the mounting clips for the air grill (arro and remove the grill by bringing it toward the front
156nLamps and bulbs
amps sport wagon lamp/Side marker lamps: LEDs ining bulbs: 21 watt
Tail l Rear Rema
3 9 2 u s7
2 2
n signal indicator red
r lamp/ e marker lamps red
kup lamps white
ke lamps, reflector red
lector red
Please contact your BMW center if there is a defect in the rear side marker lamp assembly.<
1 Tur
2 Rea Sid
3 Bac
4 Bra
5 Ref
lamp/
Tail lamps sedan Rear lamp/Side marker lamps: LEDs Remaining bulbs: 21 watt
3 9 4 u s7
2 1
1. Use the upper handle to fold down the side panel in the luggage com- partment
2. Turn the corresponding bulb holder 3 9 4 d
e7 6 9
1 Turn signal indicator yellow or white
2 Rear lamp/ Side marker lamps red
3 Backup lamps white
4 Brake lamps red
5 Reflector red
Please contact your BMW center if there is a defect in the rear
lamp/side marker lamp assembly.<
to the left (arrow) and remove it 3. Press the defective bulb gently and
turn it to the left. Remove the bulb and replace it
4. Insert the bulb holder and turn to the right as far as possible.
157n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Lamps and bulbs
ter (high-mount) brake lamp att bulb
pen the luggage compartment lid nclip the cover panel (on the
id/
Cen 21 w
1. O 2. U
3 9 4 d
e1 2 3
Re pa
ir s
Da ta
In de
x
nderside of the rear tray) with screwdriver (arrow) urn the bulb to the left and remove pply gentle pressure to the bulb hile turning it to the left to remove.
rt wagon: LED strip in the tailgate. se contact a BMW center in case of
alfunction.
r
e.
u a
3. T 4. A
w
spo Plea a m
Lamps in the rear apron panel:
1. Open the cover in the side panel 2. Turn the quick-release fastener and
remove the trim panel in front of the
3 9 2 d
e7 7 0
Lamps in the luggage compartment l tailgate:
1. Open the trim panel in the luggage compartment lid/tailgate
3 9 2 d
e7 7 1
bulb holder 3. Open the quick-release fastener
(arrow) and remove the bulb holder 4. Apply gentle pressure to the bulb
while turning it to the left to remove.
If a subwoofer* is installed behind the right-hand panel, unscrew the T-screw and swing the subwoofer to the side.
2. Open the quick-release fastener (arrow) and remove the bulb holde
3. Apply gentle pressure to the bulb while turning it to the left to remov
158nLamps and bulbs Changing a wheel
on the jack on a firm support sur-
t place wooden blocks or similar ts under the jack. If this is done, ck might not be able to reach its pport capacity because of the d height. t lie under the vehicle or start the e when the vehicle is supported jack risk of fatal injury.<
Positi face. Do no objec the ja full su limite Do no engin by the
-
License plate lamps 5 watt bulb
1. Insert a screwdriver into the slot and
3 9 4 d
e7 7 2
Safety measures in the event of a flat tire or wheel change:
Stop the vehicle as far as possible from passing traffic. Park on a firm, flat, sur- face. Switch on the hazard warning flashers. Turn the steering wheel to the straight- ahead position, remove the key and engage the steering lock. Shift into 1st or reverse (selector lever in Park with automatic transmission) and engage the parking brake. All passengers should be outside the vehicle and well away from your imme- diate working area (behind a guardrail, for instance).
press to the left (arrow); this disen- gages the lamp
2. Remove the lamp and replace the bulb.
If necessary, set up your warning tri- angle or portable hazard warning lamp on the roadside at an appropriate dis- tance from the rear of the vehicle. Comply with all safety guidelines and regulations. Change the wheel only on a level, firm surface which is not slippery. Avoid jacking the vehicle up on a soft or slip- pery surface (snow, ice, very smooth surfaces, etc.), since it could slide side ways.
159n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Changing a wheel
cedure Carefully read and comply with the safety precautions on the previous page Secure the vehicle to prevent it from rolling: Place the wedge against the rear surface of the front tire on the side opposite the side being raised. If the vehicle is parked on a down- ward slope, place the wedge securely in front of the tire. If the wheel must be changed on a sur- face with a more severe slope, take additional precautions to secure the vehicle from rolling Wheels with full wheel covers*:
e
ng t
Pro 1.
2.
3.
Re pa
ir s
Da ta
In de
x
Reach into the ventilation openings and pull the cover off
w
g-
t
What you will need In order to avoid rattling noises later, note the position of the tools when you remove them and return them to their
3 9 4 d
e0 9 0
>Wedge (wheel chock) Located next to the jack. Loosen th wingnut to remove it
>Spare tire and adapter* for removi the lug bolt cover* (refer to the nex
3 9 4 d
e0 9 1
original positions when you are through using them.
>Car jack sedan: fold back the luggage com- partment floor mat for access, then unscrew the wingnut to release the jack (arrow). sport wagon: raise the floor panel and spare tire cover (refer to page 127). When you have completed work, screw the jack all the way back down. Fold the handle back and insert it in its holder
page) Both are next to the jack. Remove t adapter or the plastic cover. Unscre the wingnut (arrow) by hand and remove the wheel
>Lug wrench and screwdriver In the onboard tool kit under the lu gage compartment lid (refer to page 152). sport wagon: the lug wrench is nex to the spare tire.
160nChanging a wheel
osition the spare tire. Secure the heel by turning at least two lug lts into opposite bolt holes
crew in the remaining lug bolts.
11. P w bo
12. S
3 9 0 d
e3 6 0
ghten all the bolts securely in a agonal pattern wer the jack and remove it from neath the vehicle
ghten the lug bolts in a diagonal ttern heels with full wheel covers:
lace the wheel cover with the lve opening over the valve rrow). Use both hands to press e cover securely onto the rim
For this light-weight wheel, use only the full wheel cover installed factory. Other wheel covers may securely.<
Ti di
13. Lo be
14. Ti pa
15. W P va (a th
by the not fit
4. Wheels with adapter*: position the lug bolt adapter on the lug bolt cover. Then apply the lug wrench and turn it to the left (refer to the
3 9 0 d
e7 7 3
7. Position the jack at the jacking point closest to the flat tire so that the jack base is vertically below the jacking point and the entire surface
3 9 0 d
e7 0 7
illustration) 5. Wheels with hub cover*: pry the
hub cover off with the screwdriver in the slot
6. Loosen the lug bolts 1/2-turn
of the head of the jack will move into the square recess of the jacking point (refer to the illustration detail) when the jack is cranked
8. Jack the vehicle up until the wheel you are changing is raised from the ground
9. Unscrew the lug bolts and remove the wheel
10. Remove accumulations of mud or dirt from the mounting surfaces of the wheel and hub. Clean the lug bolts
161n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Changing a wheel
l
g e re
Re pa
ir s
Da ta
In de
x
c-
-
16. Wheels with hub covers: Position the hub cover and press it on tightly
17. If equipped with lug bolt covers: Align the arrow on the cover with the line in the wheel and press the cover into place
18. Check and correct the tire inflation pressure at the earliest opportunity. For vehicles with Tire Pressure Monitor (RDC)*: After mounting the spare tire or cor- recting the inflation pressure, reac- tivate the system. Refer to page 101.
The vehicle jack is designed for
When storing the wheel, take care to ensure that you do not damage the retaining pin in the spare tire recess.
If light-alloy wheels other than origina BMW light-alloy wheels have been mounted, it may be necessary to use different lug bolts for those wheels.
Replace the defective tire as soon as possible and have the new wheel/tire balanced.
Protect valve inserts against dirt usin screw-on valve stem caps. Dirty valv stems frequently lead to slow pressu loss.
Size 255/40 R17 94 W* tires on
attempt to raise another vehicle model with it or to raise any load of any kind. To do so could cause accidents and personal injury. To ensure continued safety, have the lug bolts checked with a calibrated torque wrench [torque specification 72 lb-ft (100 Nm)] at the earliest opportunity.<
the rear axle: In the event of a flat tire, it may be ne essary to mount the spare tire of dif- ferent size at the rear. This tire is suit able for use in all load and speed ranges. Nevertheless, you should remount a tire of the correct size as soon as possible.<
162nBattery Fuses
glove compartment the glove compartment and turn o white quick-release fasteners left.
. - -
In the Open the tw to the
3 9 0 d
e0 8 5
Battery posts, terminals and other components contain lead and lead
compounds. Wash hands after han- dling.<
Battery care The battery is maintenance-free, that is, the original electrolyte will normally last for the service life of the battery under moderate climatic conditions.
For all questions that regard the battery, please consult your BMW
center. The battery is completely main- tenance-free; the following section is provided for your information only.<
Charging the battery When charging the battery in the vehicle, leave the engine off at all times Connect the charge cables to the termi nals in the engine compartment (for ter minal locations, refer to "Jump-starting" on page 164).
Return used batteries to a recy- cling point or your BMW center.
Maintain the battery in an upright posi- tion for transport and storage. Secure the battery against tilting during trans- port.<
Do not disconnect the battery when the engine is running, as the
ensuing voltage surge would damage the vehicle's onboard electronics.<
163n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Fuses
ng he
Re pa
ir s
Da ta
In de
x
e
d
er-
In the luggage compartment Use the handle to pull down the trim on the right wall.
3 9 4 d
e6 7 8
In the cargo area sport wagon Open the right access door by pressi the button and pull the trim panel to t side.
3 9 2 d
e1 7 2
If a subwoofer* is installed, loosen th T-screw and swing the subwoofer to the side.
Do not attempt to repair a burne fuse or replace it with a fuse
having a different color or ampere rating. To do this could cause a fire in the vehicle resulting from a circuit ov load.<
164n
ext, connect one end of the other mper cable () to either the sup- rt vehicle's negative battery ter-
inal or a suitable ground on its
Jump-starting
Do not use spray starter fluids to start the engine.
When your battery is discharged you can used two jumper cables to start your vehicle with power from the bat- tery in a second vehicle. You can also use the same method to help start another vehicle. Always use jumper cables with fully insulated handles on the terminal clamps.
Do not touch high-voltage wiring and cables on a running engine.
Contact with components carrying high voltage can be harmful or fatal. Care- fully observe the following instructions
4. Start the engine on the support vehicle and allow it to run
5. Use one jumper cable (+) to con- nect the positive terminal of the
3 9 0 d
e6 9 0
gine or bodywork. Connect the her end to the negative battery rminal or a suitable ground on the hicle being started. There is a ecial nut on the strut dome of ur BMW; refer to the arrow in the
ustration
Always adhere to this sequence when connecting jumper cables; to observe this procedure can o sparks at the battery terminals ose an injury hazard.<
to avoid personal injury and/or damage to one or both vehicles.<
1. Ensure that the battery in the sup- port vehicle is also rated at 12 volts. This information is pro- vided on the top of the battery casing
2. Do not disconnect your battery from your vehicle's electrical system. Switch off all electrical accessories in both vehicles
3. Make absolutely certain that there is no contact between the body- work of the two vehicles short cir- cuit hazard
battery in the support vehicle with the auxiliary positive terminal pro- vided in the engine compartment of your BMW specifically for jump- starting. The cover on this auxiliary terminal is identified by a "+" symbol, refer to the illustration. Pull up to open the cover
6. N ju po m
3 9 0 d
e1 4 6
en ot te ve sp yo ill
failure lead t and p
165n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Jump-starting Towing the vehicle
r: ly pressure to the arrow symbol on cover panel to remove.
Screw the tow fitting in until it bot-
he ns is
Rea App the
3 9 4 d
e0 8 8
Re pa
ir s
Da ta
In de
x
toms firmly. Failure to screw the g all the way in can cause thread age. er attach tie-down hooks, chains, ps, or tow hooks to tie rods, control s, or any other part of the vehicle pension, as severe damage to these ponents will occur, leading to pos-
e accidents.<
only a nylon towing strap to tow vehicle, since the inherent resil- e of this material helps protect both icles from sudden jerking move- ts.
of g
n
fittin dam Nev stra arm sus com sibl
Use the ienc veh men
7. Start the support vehicle's engine and let it run at an increased idling speed for a few minutes. Start the engine on the vehicle needing the jump-start, and allow it to run as usual. If the first start attempt is not successful, wait a few minutes before another attempt in order to allow the discharged battery to recharge
8. Before disconnecting the jumper cables let the engines run for a few minutes
9. Then disconnect the jumper cables in reverse sequence.
Depending on the cause of the fault, have the battery recharged by your
Tow fitting The screw-in tow fitting is stored in t onboard tool kit; be sure that it remai in the vehicle at all times. This fitting
3 9 0 d
e0 8 7
BMW center. designed for installation in the tow sockets located at the front and rear the vehicle, and is intended for towin on paved road surfaces only. It should not be used to pull a vehicle out of deep snow, mud, sand, etc. Always observe all applicable towing laws and regulations.
Access to tow sockets Front: Apply pressure to the arrow symbol o the cover panel to remove.
166nTowing the vehicle
ng with a commercial ruck not tow with sling-type equipment a wheel-lift or flatbed carrier
.
Towi tow t >Do >Use
3 8 0 u s1
2 4
ase comply with applicable towing s.
Never allow passengers to ride in a towed vehicle for any reason.<
>Ple law
The towed vehicle should always be the lighter of the two vehicles.
If this is not the case, it is no longer possible to control vehicle response.<
Tow-starting It is not possible to start the engine of vehicles equipped with an automatic transmission by towing or pushing.
For instructions on jump-starting: refer to page 164.
Never attempt to use your vehicle to push another vehicle, since damage to the energy-absorbing bumpers could result.
Towing a vehicle with automatic transmission 1. Place the selector lever in position N 2. Towing speed:
Max. 45 mph (70 km/h) 3. Towing distance:
Max. 95 miles (150 km) 4. Leave the ignition key in position 1 to
ensure that the brake lamps, turn signal indicators, horn and wind- shield wipers remain operative, and to prevent the steering lock from engaging
5. Switch on the hazard warning flashers (observe official regulations)
Find some means of identifying the
Make sure that the ignition key remains in position 1 even when
the electrical system has failed to pre- vent the steering lock from engaging. The steering and brakes are without power-assist when the engine is off. This means that increased effort is required for steering and braking.<
167n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
168n
169n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
de x
Overview
Controls and features
Operation, maintenance
Owner service procedures
Index
Technical data
In
Index
170n
BMW 540i/sport wagon
268.4 (4,398) 8
290 5,400
324 (440) 3,600
10.0
3.26 (82.7) 3.62 (92.0)
agement system
Engine specifications
BMW 525i/sport wagon BMW 530i
Displacement Number of cylinders
cu in (cmm) 152.2 (2,494) 6
181.8 (2,979 6
Maximum output at engine speed
hp rpm
184 6,000
225 5,900
Maximum torque at engine speed
Ib ft (Nm) rpm
175 (236) 3,500
214 (289) 3,500
Compression ratio e 10.5 10.2
Stroke Bore
in (mm) in (mm)
2.95 (75.0) 3.31 (84.0)
3.53 (89.6) 3.31 (84.0)
Fuel-injection system Digital electronic engin
)
e-man
171n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Dimensions sedan
0i: 37.4 ft (11.4 m)
2 3
All dimensions are given in inches (mm). Min. turning circle dia.: BMW 525i, 530i: 37.1 ft (11.3 m); BM
172nDimensions sport wagon
ge rack*: 57.4 (1,459) .4 m)
ed lugga 7.4 ft (11
9 2 u s7
2 4
All dimensions are given in inches (mm). Height with roof-mount Min. turning circle dia.: BMW 525i: 37.1 ft (11.3 m); BMW 540i: 3
173n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Weights sedan
W 530i BMW 540i
) 4 (1,585) 9 (1,610)
3,748 (1,700) 3,803 (1,725)
9 (2,045) 3 (2,070)
4,762 (2,160) 4,817 (2,185)
8 (970) 2,381 (1,080)
9 (1,170) 2,635 (1,195)
(100) 220 (100)
(460) 16.2 (460)
BM
included 3,49 3,54
4,50 4,56
2,13
2,57
220
16.2
BMW 525i
Curb weight (with one person, ready for operation, full tank of fuel, options not with manual transmission with automatic transmission
lbs. (kg) lbs. (kg)
3,450 (1,565) 3,505 (1,590)
Approved gross vehicle weight with manual transmission with automatic transmission
lbs. (kg) lbs. (kg)
4,464 (2,025) 4,520 (2,050)
Approved front axle load lbs. (kg) 2,138 (970)
Approved rear axle load lbs. (kg) 2,579 (1,170)
Approved roof load capacity lbs. (kg) 220 (100) Never exceed either the approved axle loads or the gross vehicle weight.
Luggage compartment capacity cu ft (l) 16.2 (460)
174nWeights sport wagon
BMW 540i
4,056 (1,840)
5,093 (2,310)
2,381 (1,080)
2,910 (1,320)
220 (100)
14.5 53.9 (410 1,525)
cluded)
1,525)
BMW 525i
Curb weight (with one person, ready for operation, full tank of fuel, options not in with manual transmission with automatic transmission
lbs. (kg) lbs. (kg)
3,682 (1,670) 3,715 (1,695)
Approved gross vehicle weight with manual transmission with automatic transmission
lbs. (kg) lbs. (kg)
4,773 (2,165) 4,828 (2,190)
Approved front axle load lbs. (kg) 2,116 (960)
Approved rear axle load lbs. (kg) 2,844 (1,290)
Approved roof load capacity lbs. (kg) 220 (100) Never exceed either the approved axle loads or the gross vehicle weight.
Cargo area capacity cu ft (l) 14.5 53.9 (410
175n
Ov er
vi ew
Co nt
ro ls
M ai
nt en
an ce
Re pa
ir s
Da ta
In de
x
Capacities
Notes
i, 530i i
Fuel specification: page 25
For details: page 141
For details: page 144
"BMW High Performance Synthetic Oil." For details: page 143
Lifetime fluid, no fluid change required
W 525 W 540
i
Fuel tank Reserve
gal. (liters) gal. (liters)
approx. 18.5 (approx. 70) approx. 2.0 (approx. 8) BM approx. 2.5 (approx. 10) BM
Windshield washer system with headlamp washer system Intensive cleaning system
quarts (liters) quarts (liters) quarts (liters)
approx. 3.7 (approx. 3.5) approx. 6.3 (approx 6.0) approx. 1.1 (approx 1.0)
Cooling system including heater circuit
quarts (liters) 11.1 (10.5) BMW 525i, 530 12.7 (12.0) BMW 540i
Engine oil and filter change quarts (liters) 6.9 (6.5) BMW 525i, 530i 7.9 (7.5) BMW 540i
Manual transmission, automatic transmission and differential
176n
177n
Ov er
vi ew
Co nt
ro ls
ai nt
en an
ce
Overview
Controls and features
Operation, maintenance
M Re
pa ir
s Da
ta de
x
Owner service procedures
Index
Technical data
In
Key words
Everything from A to Z
atio tro itor w
d-air ontrol +T) 21
Battery 162 care 162t charging 162t discharged 164t disposal 162t
Belts 53 Beverage holder 119 Blower 107, 111 BMW active seat 52 BMW comfort seat 51 BMW Maintenance
System 146t
A ABS (Antilock Brake
System) 20, 133 Accessories 9 Activated-charcoal
filter 114 Active seat 52 Adaptive Transmission
Control (ATC) 72, 75 Add
antifreeze 144t brake fluid 145t
Alarm system 42 Anchorage points
child-restraint system with tether strap 62
Antifreeze, disposal 144t Antifreeze, radiator 144 Antilock Brake System
(ABS) 20, 133 Anti-theft alarm system 42 Anti-theft protection 34 Approved axle load 173 Approved gross vehicle
Automatic climate control 109 removing condens from windows 111
Automatic cruise con Automatic curb mon Automatic rear windo
cleaning 79 Automatic recirculate
control (AUC) 112 Automatic Stability C
plus Traction (ASC
Adjus bac hea mir sea ste tem thig
Ai Ai Ai Ai
Ai Ai Ai
ontrol mic SC+T/
2 ion with
96 al
BMW Universal Transmitter 115
Bottle holder, refer to beverage holder 119
Brake fluid 145 adding 145
Brake hydraulic system 19 Brake lamps, bulb
replacement 156t Brake malfunctions 134 Brake system 134
brake fluid level 134
ine coolant 144t ine oil 142t
sher fluid 141t ting krest 50 d restraints 52 rors 57 ts 48 ering wheel 56 perature 107, 111 h support 50 nditioning 106
weight 173 Aquaplaning 133, 135 ASC+T (Automatic Stability
Control plus Traction) 21 ASC+T/DSC (Automatic
Stability Control plus Traction/Dynamic Stability Control) 99
Ashtray, front 119 Ashtray, rear 120 ATC (Adaptive Transmission
Control) 72, 75
Automatic Stability C plus Traction/Dyna Stability Control (A DSC) 99
Automatic transmission 20, 7
Automatic transmiss Steptronic 20, 75
Average fuel consumption 88
Average speed 88, Avoiding unintention
50
156t
brake pads 20, 134 disc brakes 134 malfunctions 134
Break-in procedures 132 Bulbs and lamps 153t
r co r distribution 107, 111 r outlets 106, 109 r pressure, tires 26t, 135 r supply 107, 111 r vent 106, 109 rbags 20, 59
Attach vacuum cleaner 120 AUC (Automatic
recirculated-air control) 112
alarms 43t, 44
B Backrest, adjusting Backup lamps
bulb replacement
n
l 80 55
Everything from A to Z 179n
Ov er
vi ew
Co nt
ro ls
ce
ng
re
11 , 9
o 119
Displays 16, 17 Disposal
antifreeze with corrosion inhibitor 144t used batteries 162t used oils 143t
Distance from destination 94
Distance warning 98 Divided rear-seat
backrest 121 Doors
manual operation 33
C California Proposition
65 Warning 147 Capacities 175 Cargo area
floor compartment 127 lamps 105 opening from the inside 40 partition net 125 roll-up cover 125
Cargo loading 128
Clean rear window 79 Cleaning windshield 79 Climate control, refer to
Automatic climate control 109
Clock 90 for additional information refer to the "Owner's Manual for Onboard Computer"
Cockpit 14 Code, refer to immobilizer
function 96
Convenience starti feature 69
Coolant 144 Coolant temperatu
gauge 84 Copyright 4 Cover, sun blinds Cruising range 88 Cup holder 119 Cup holder, refer t
beverage holder Curb monitor 55
M ai
nt en
an Re
pa ir
s
ps 103 ke
nsor 43 43
108, 111
opening and closing 34 opening/closing from the inside 34 operation via remote control 34
DOT Quality Grades 136 Driving notes 133 DSC (Dynamic Stability
Control) 21, 99 Dynamic Brake Control
(DBC) 20 Dynamic Stability Control
Cellular phone 119 Center (high-mount) brake
lamp 157 Central locking
system 32, 37 Changing a wheel/
tire 158t Charge indicator lamp 19 CHECK button 85 Check Control 85t Check engine oil
level 142t Child seats 62
Cold start 69 Comfort seat 51 Compartments 118 Computer 88
for additional information refer to the "Owner's Manual for Onboard Computer" remote control 97
Computer in the MID 93 Configuring personal
adjustments, Vehicle and
D Date
calling up 90 changing 90
Daytime driving lam DBC (Dynamic Bra
Control) 20 Deactivating 97
interior motion se tilt alarm sensor
Deep water 133 Defrost windows
Da ta
In de
x
08, 111 MID 90
l 142t 4
(DSC) 21, 99
E Electric power seat 50 Electric power windows 44
Child-restraint installation 64
Child-restraint system with tether strap 62
Child-restraint systems 62 Child-safety locks 66 Cigarette lighter 120
Key Memory 67 Consumption display 83 Consumption, fuel 88, 95 Convenience operation of
windows and sliding/tilt sunroof 33
Defroster mode 1 Digital clock in the Dimensions 171 Dipstick, engine oi Displacement 170 Display lighting 10
4 5
Everything from A to Z
Electrica doors fuel fil luggag lid 38 sliding tailgat
Element cockp
Emergen luggag fro co
Ene Eng
es Eng Eng
co di le pr sp
11
1
High Performance Synthetic Oils 143
High-mount brake lamp 157 Holder for canned
beverages 119 Hood 139
release 139t Horn 14 Hydraulic Braking Assistant,
refer to DBC 20 Hydroplaning 133, 135
l malfunction 33
ler door 24 e compartment /tilt sunroof 47 e 39 s of operation, it 14 cy release of e compartment lid ggage
F Failure messages 85t Filling the washer
reservoir 141t First-aid kit 23 Fittings, tow-starting and
towing 165t Flashlight 118 Flat tire 135, 158t Fog lamps 104
bulb replacement 155t Fold rear-seat backrest 121
G Gasoline 25
gauge 83 quality 25
Glass moonroof 47 Glove compartment Grilles 109 Gross vehicle weight
H Handbrake 70
119 gle 23
8
el 56
9 d 113
I Ice warning 82 Identification, tires 137 Ignition lock 68 Immobilizer function 96
activating code 96 deactivating code 96 selecting code 96
Imprint 4 Indicator and warning
lamps 19 Inflation pressure 26t
m lu mpartment's interior 41
rgy control 83 ine compartment sentials 140 ine coolant 84, 144 ine oil 142 nsumption 142
sposal 143t vel 20 essure 19 ecifications 143t cosity ratings 143
Follow me home lamps 103 Front ashtray 119 Front fog lamps 104 Front seat adjustment 48 Fuel 25
gauge 83 quality 25 specifications 25 tank capacity 175
Fuel consumption 88, 95 average 88, 95 indicator 83
Hands-free system Hazard warning trian Head restraints 50 Headlamp covers,
care 153t Headlamp flasher 7 Headlamp washer
system 141 Heated seats 55 Heated steering whe Heating and
ventilation 106, 10 Heating while stoppe
1 153t
monitoring 101 Inflation pressure,
tires 26, 135 INSPECTION 84 Instrument
cluster 15, 16, 17
vis Engine specifications 170 Estimated time of arrival 95 Exterior mirrors 57, 58
Fuel filler door 24 electrical malfunction 24 manual release 24
Fuses 162
Heavy cargo 128 Height adjustment
seats 50 steering wheel 56
Height of vehicle 17 High beams 21, 104
bulb replacement
8
73
Everything from A to Z 181n
Ov er
vi ew
Co nt
ro ls
ce
2 0
146 ys
4 tment
Mirrors 57 adjusting 57 automatic dimming feature 58 defrosting 57 memory setting 54
Modifications, technical 9, 147
Monitoring inflation pressure, tires 101
Moonroof 47 Multifunction buttons,
steering wheel 22
Instrument displays 15 Instrument lighting 104 Instruments 15 Intensive cleaning 141 Interior lamps 105 Interior mirrors 58 Interior motion sensor 42
avoiding unintentional alarms 44 deactivate 35
Interior rearview mirror 57 automatic dimmer 58
Interlock 68
Level control system 21, 101
License plate lamps bulb replacement 158t
Lighter 120 LIGHTS ON warning 103 LIMIT 93 Load-securing devices 128 Louvers 106, 109 Low beams 103
bulb replacement 153t Low-fuel warning lamp 83 Lug bolts 160
Luggage net 42 Luggage straps 4 Lumbar support 5
M M+S tires 138 Maintenance 84, Malfunction displa Manual operation
doors 33 fuel filler door 2 luggage compar
M ai
nt en
an Re
pa ir
s
f 47
n 71
112 seat 49
112
nd 4
uals ("Key
Multi-Information Display (MID) 89
N Non-smoker's
equipment 120
O OBD interface socket 148 Odometer 16, 82 Oil additives 142 Oil change interval, refer to
J Jack 159 Jump-starting 164t
K Key Memory 67 Key with remote control 32 Keys 32 Kickdown 73, 76
Lug wrench 159t Luggage
compartment 38, 42, 125 capacity 173 manual operation 38t
Luggage compartment lid 38 electrical malfunction 38 emergency release from luggage compartment's interior 41 opening from the
lid 38 sliding/tilt sunroo tailgate 39
Manual transmissio Manually controlled
recirculated-air Manually-adjusted Master key 32 Maximum cooling Memory settings
for seat, mirror a steering wheel 5 related to individ
Da ta
In de
x
hicle y") 67 4 tion
the Service and Warranty Information Booklet (US models) or to the Warranty and Service Guide Booklet (Canadian models)
Oil consumption 142
L Lamp switch 103 Lamps and bulbs 153t Lashing eyes to secure the
load 128 Length of vehicle 171
outside 39 opening separately 38 remote control 35 secure separately 38
Luggage compartment's interior, emergency release 41
Memory") 67 related to the ve ("Vehicle Memor
Microfilter 108, 11 MID (Multi-Informa
Display) 89
t 85t
Everything from A to Z
2
g 79
Reservoir, washer system 141t
Residual heat 113 Rims 137 Roller sun blind 114 Roll-up cover 125 Roof load capacity 173 Roof-mounted luggage
rack 129
S
Oil dipstick 142t Oil level, indicator lamp 20 Oil pressure, indicator
lamp 19 Oil specifications 143t Oil viscosity 143 Oils, disposal 143t OILSERVICE 84 Old batteries 162 Onboard computer, refer to
the "Owner's Manual for Onboard Computer"
P Park Distance Control
(PDC) 98 Parked-car ventilation
system 114 for additional information refer to the "Owner's Manual for Onboard Computer"
Parking aid 98 Parking brake 20, 70 Parking lamps 103
R Rain sensor 78 RDC (Tire Pressure
Monitor) 101 Reading lamps 105 Rear ashtray 120 Rear window 40
defroster 107, 11 sun blinds 114 wiper 79
Rear window cleanin Rear-seat backrest
Onboa syst
Onboa (OB
Onboa Openi
from from usin usin con
Ope wi
Ope Outl
ve Outs
di
e 107
mo) 91
n from
Safety belts 53 Safety defects, reporting 10 Safety lock buttons 37 Seat belts 53 Seat heating 55 Seats
electric power 50 heating 55 manually-adjusted 49 memory setting 54
Secure the load 128 Securing cargo 42, 128 Selector lever, automatic
rd Diagnostic (OBD) em 148 rd Diagnostics
D) 148 rd tool kit 152t
ng and closing the inside 37 the outside 33 g the key 33 g the remote trol 33 ng the rear
bulb replacement 154t Partition net 125 Passenger-side mirror tilt
function 55 PDC (Park Distance
Control) 98 Pocket light 118 Pollen filter 108, 114 Power windows 45
safety switch 45 Power-slip control, refer to
ASC+T/DSC 99
fold 121 folding 121
Rearview mirror 57 Recirculated-air mod Reclining seat 48 Refueling 24 Releasing hood 139 Reminder signal (Me Remote control 34
computer 97 Remove condensatio
windows 108, 111
53t
cts 10
transmission 72, 75 Self-leveling
suspension 101 inactive 21
Service and Warranty 10 Service and Warranty
Information Booklet (US models) 146
ni ndow 40 rating range 88 ets, ntilation 106, 109 ide temperature
splay 82, 88
Q Quality Grades, tires 136
Replacing fuses 162t lamps and bulbs 1 wiper blades 152t
Reporting safety defe
Everything from A to Z 183n
Ov er
vi ew
Co nt
ro ls
ce
h ton
rm er' ard
ents 118 126
Temperature display 82, 88 Temperature gauge 84 Temperature
layering 108, 113 Tether strap 62 Third brake lamp 157 Through-loading
system 121 Tilt alarm sensor 42, 43
avoiding unintentional alarms 44 deactivate 35
Tilt function, passenger-side
Service Interval Display 84, 146
Shiftlock 72, 75 Shoulder support 51 Side airbags 59 Side Impact Head Protection
System 59 Side lamps
bulb replacement 154t Side turn signal indicators
bulb replacement 155t Sitting safely 48
with airbags 48
sport wagon cargo area 125 compartments in the cargo area 126 cover in the cargo area 126 folding down the rear backrest 125 lashing eyes 128 load-securing devices 128 opening the rear window 40
Steering wheel wit multifunction but
Steptronic 75 Stopwatch 91
for additional info refer to the "Own Manual for Onbo Computer"
Storage compartm in the cargo area
Summer tires 137 Sun blinds 114 Sunroof 46
M ai
nt en
an Re
pa ir
s
ngine 70 r parked- 2
t 156t
39 39
mirror 55 Time
calling up 90 changing 90 of arrival, estimated 95
Timer 90 for additional information refer to the "Owner's Manual for Onboard Computer"
Tire change 158t
with safety belt 48 Ski bag 122 Ski bag in the sport
wagon 124 Sliding/tilt sunroof 46
manual operation 47 with glass moonroof 47
Snow chains 138 Socket for attaching
electrical appliances 120 Spare tire 159t Speaker 119
partition net 125 rear window wiper, blade replacement 152t releasing the tailgate after an electrical malfunction 39 roll-up cover 125 securing a load 128 ski bag 124 tail lamp assembly, bulb replacement 156t
Standing lamps 104
Switching off the e Switch-on times fo
car ventilation 9 Symbols 8
T Tachometer 83 Tail lamps 156
bulb replacemen Tailgate
manual operation manual release
Da ta
In de
x
147 tion 119
damage 135t inflation pressure 26, 135 pressure monitoring 101, 135 replacement 136 tread 135
Tire inflation pressure 26
Special characteristics of winter tires 138
Special oil 143t Speed 96 Speed limit 93 Speed, average 88, 96 Speedometer 15, 16, 17
Starting assistance 164t Starting problems 69t Starting the engine 69 Steering wheel
heating 56 lock 68 memory setting 54
opening from the inside 40 opening from the outside 39
Technical modifications 9,
Telephone prepara
s 22
ation s
Everything from A to Z
T
T T T T T T T
T
8 15
t
ire Pressure Monitor (RDC) 101
ire Quality Grading 137 ools 152t orque 170 ow fittings 165t owing the vehicle 165t rack 171 raction control system, refer to ASC+T/DSC
ransmission 71, 72, 75 ransmitter key 32
Used batteries, disposal 162t
Used oils, disposal 143t
V Vacuum cleaner, attach 120 Valve caps 161 Vehicle Memory 67 Vent outlets 108, 113 Ventilation 106, 108, 113
draft-free 108, 113
Wheelbase 171 Width of vehicle 171 Windshield wipers 7
blade replacement Winter tires 138 Wiper blade
replacement 152t Wiper system 78 Work in the engine
compartment 139
X
safely 62 Tread depth, tires 135 Trip odometer 82 Trunk lid
refer to luggage compartment lid 38
Trunk, refer to luggage compartment 42
Turn signal indicator 78 bulb replacement 154t
Turning circle 171
in the rear 108 Viscosity ratings, oils 143
W Warm feet cool
head 108, 113 Warning and indicator
lamps 19 Warning lamps 19t Warning messages 85t Warning triangle 23 Warranty and Service Guide
Booklet (Canadian
Xenon lamps 154
U Uniform Tire Quality Grading
(UTQR) 137 Universal Transmitter 115 Use antifreeze,
radiator 144t
models) 146 Washer system 78 Water on the roads 133 Weights 173 Wheel and tire
combinations 137 Wheel change 158t
2t
Refueling
To ensure that you always have conve- nient access to all essential information when you stop for fuel, we recommend that you take the time to fill out the adjoining chart by entering the data that apply to your vehicle. Consult the index for individual specifi- cations.
Fuel
Please enter your preferred fuel here.
Engine oil
The space between the two marks on the dipstick corresponds to approx.
Designation
Quality
mer tires Winter tires
Rear Front Rear
1.1 US quarts (1 liter).
Tire inflation pressures
Up to 4 persons
5 persons or 4 plus luggage
Sum
Front
The Ultimate Driving Machine
0 1
4 1
0 1
5 6
8 1
8 u
e
More about BMW
bmwusa.com
Related manuals for BMW 530i Sports Wagon 5 Series 2003 Owner's Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the 5 Series BMW works, you can view and download the BMW 530i Sports Wagon 5 Series 2003 Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for BMW 5 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a BMW 5 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the BMW 530i Sports Wagon 5 Series 2003 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This BMW 530i Sports Wagon 5 Series 2003 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download BMW 530i Sports Wagon 5 Series 2003 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print BMW 530i Sports Wagon 5 Series 2003 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW 530i Sports Wagon 5 Series 2003 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.