Contents

BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual PDF

1 of 223
1 of 223

Summary of Content for BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual PDF

The Ultimate Driving Machine

Owner's Manual for Vehicle

325i 330i

Owner's Manual for Vehicle Congratulations, and thank you for choosing a BMW.

Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:

Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new vehicle. It contains important data and instructions intended to assist you in gaining maximum use and satisfaction from your BMW's unique range of technical fea- tures. The manual also contains information on maintenance designed to enhance operating safety and contribute to main- taining the value of your BMW throughout an extended service life.

This manual is supplemented by a Service and Warranty Informa- tion Booklet for US models or a Warranty and Service Guide Booklet for Canadian models.

We wish you an enjoyable driving experience.

BMW AG

2005 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order No. 01 41 0 159 259 US English II/05, 05 03 500 Printed in Germany Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Contents

The fastest way to find information on a partic- ular topic or item is by using the index, refer to page 206.

Using this Owner's Manual 4 Notes

At a glance 10 Cockpit 16 iDrive 22 Voice command system

Controls 28 Opening and closing 38 Adjustments 46 Transporting children safely 49 Driving 64 Everything under control 77 Technology for driving comfort

and safety 85 Lamps 89 Controlling the climate for

pleasant driving 93 Practical interior accessories

Driving tips 106 Things to remember when driving

Navigation 114 Starting the navigation system 115 Destination entry 125 Destination guidance 130 What to do if

Entertainment 134 On/off and settings 138 Radio 145 CD player and CD changer 149 External audio device

Communications 152 Telephoning 160 TeleService, BMW Assist

Mobility 168 Refueling 170 Wheels and tires 180 Under the hood 185 Maintenance 187 Replacing components 193 Giving and receiving assistance

Reference 200 Technical data 202 Short commands for the voice

command system 206 Everything from A-Z

N o

te s

4

Notes

Using this Owner's Manual We have tried to make all the information in this Owner's Manual easy to find. The fastest way to find specific topics is to refer to the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter.

Should you sell your BMW some day, please remember to hand over the Owner's Manual as well; it is an important component of your vehi- cle.

Additional sources of information Should you have any other questions, your BMW center will be glad to advise you at any time.

Information on BMW, e.g. on technical aspects, can also be found on the Internet at www.bmwusa.com.

Symbols used Indicates precautions that must be fol- lowed precisely in order to avoid the pos-

sibility of personal injury and serious damage to the vehicle.

Indicates information that will assist you in gaining the optimum benefit from your

vehicle and enable you to care more effectively for your vehicle.

Refers to measures that can be taken to help protect the environment.

< Marks the end of a specific item of informa- tion.

* Indicates special equipment, country-spe- cific equipment and optional extras, as well as equipment and functions not yet available at the time of printing.

"..." Identifies Control Display texts used to select individual functions.

{...} Verbal instructions to use with the voice command system.

{{...}} Identifies the answers generated by the voice command system.

Symbols on vehicle components Indicates that you should consult the rel- evant section of this Owner's Manual for

information on a particular part or assembly.

5

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

The individual vehicle When you ordered your BMW, you chose vari- ous items of equipment. This Owner's Manual describes the entire array of options and equip- ment available with a specific BMW model.

Please bear in mind that the manual may con- tain information on accessories and equipment that you have not specified for your own vehicle. Sections describing options and special equip- ment are marked by asterisks * to assist you in identifying possible differences between the descriptions in this manual and your own vehi- cle's equipment.

If equipment in your BMW is not described in this Owner's Manual, please refer to the accom- panying Supplementary Owner's Manuals.

Editorial notice BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible in exceptional cases that features described in this Owner's Manual could differ from those on your vehicle.

For your own safety

Maintenance and repair Advanced technology, e.g. the use of modern materials and high-performance

electronics, requires specially adapted mainte- nance and repair methods. Therefore, have cor- responding work on your BMW carried out only by a BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel. If work is car- ried out improperly there is a danger of conse- quential damage and the related safety risks.<

California Proposition 65 warning California law requires us to issue the following warning:

Engine exhaust and a wide variety of automobile components and parts,

including components found in the interior fur- nishings in a vehicle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Battery posts, terminals and related accesso- ries contain lead and lead compounds. Wash your hands after handling.

Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water.<

Parts and accessories For your own safety, use genuine parts and accessories approved by BMW.

When you purchase accessories tested and approved by BMW and Original BMW Parts, you simultaneously acquire the assurance that they have been thoroughly tested by BMW to ensure optimum performance when installed on your vehicle.

N o

te s

6

BMW warrants these parts to be free from defects in material and workmanship.

BMW will not accept any liability for damage resulting from installation of parts and accesso- ries not approved by BMW.

BMW cannot test every product made by other manufacturers to verify if it can be used on a BMW safely and without risk to either the vehi- cle, its operation, or its occupants.

Original BMW Parts, BMW Accessories and other products approved by BMW, together with professional advice on using these items, are available from all BMW centers.

Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones, including operation of any portable phone from within the vehicle without using an externally mounted antenna, or transceiver equipment, for instance, CBs, walkie-talkies, ham radio or sim- ilar accessories, may cause extensive damage to the vehicle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the BMW Limited Warranty. See your BMW center for additional information.<

Maintenance, replacement, or repair of the emission control devices and sys-

tems may be performed by any automotive repair establishment or individual using any cer- tified automotive part.<

Service and warranty We recommend that you read this publication thoroughly.

Your BMW is covered by the following warran- ties:

> New Vehicle Limited Warranty

> Rust Perforation Limited Warranty

> Federal Emissions System Defect Warranty

> Federal Emissions Performance Warranty

> California Emission Control System Limited Warranty

Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.

7

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Reporting safety defects

For U.S. customers The following applies only to vehicles owned and operated in the US.

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying BMW of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone (800) 831- 1117.

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or BMW of North America, LLC.

To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (or 366-0123 in Washington, D.C. area) or write to: NHTSA, U.S. Department of Transportation, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline.

For Canadian customers Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may tele- phone the toll free hotline 1-800-333-0510, or contact Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330 Sparks Street, Ottawa ON K1A 0N5.

At a glance This overview of buttons, switches and displays is intended to familiarize you with your vehicle's

operating environment. The section will also assist you in becoming acquainted with the

control concepts and options available for operating the various systems.

C o

ck p

it

10

Cockpit

Around the steering wheel: controls and displays

3 Adjusting exterior mirrors, automatic curb monitor* 43

1 Safety switch for electric rear windows 36

2 Opening and closing windows 35

4 Parking lamps 85

Low beams 85

Automatic headlamp control* 85

5 Fog lamps* 87

A t

a g

la n

ce

11

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

7 Instrument cluster 12

10 Ignition lock 49

11 Buttons* on the steering wheel

12 Horn: the entire surface

13 Steering wheel adjustment 44

15 Releasing the hood 180

16 Opening the luggage compartment lid*

6 Turn signals 53

High beams, headlamp flasher 86

Roadside parking lamps* 86

Computer 65

Settings and information about the vehicle 68

Instrument lighting 87

8 Windshield wipers 54

Rain sensor* 54

9 Switching the ignition on/off and starting/stopping the engine 49

Telephone*:

> Press briefly: receiving and ending a call, starting dialing* for a selected number

> Press longer: redialing

Volume

Activating/deactivating voice com- mand system*

Switching radio stations Selecting music tracks Scrolling through phone book

Individually programmable 45

Individually programmable 45

14 Cruise control* 55

Active cruise control* 57

C o

ck p

it

12

Instrument cluster

1 Speedometer

2 Indicator lamps for turn signals

3 Indicator and warning lamps 13

4 Displays for active cruise control* 57

5 Tachometer 64

6 Energy Control 64

7 Display for

> Clock 64

> Outside temperature 64

> Indicator and warning lamps 73

8 Display for

> Position of automatic transmission* 51

> Computer 65

> Date of next scheduled service, and remaining distance to be driven 69

> Odometer and trip odometer 64

> Settings and information 68

9 Fuel gauge 65

10 Resetting trip odometer 64

A t

a g

la n

ce

13

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

Indicator and warning lamps

The concept

Indicator and warning lamps can light up in var- ious combinations and colors in both the indica- tor area 1 and the display 2.

Some lamps are checked for proper functioning and thus come on briefly when the engine is started or the ignition is switched on.

Explanatory text messages

Text messages at the lower edge of the Control Display explain the meaning of the displayed indicator and warning lamps.

You can call up more information, e.g. on the cause of a malfunction and on how to respond, via Check Control, refer to page 73.

In urgent cases, this information will be shown immediately as soon as the corresponding lamp comes on.

Indicator lamps without text messages The following indicator lamps in the indicator area 1 signal that the associated functions are activated:

High beams/headlamp flasher 86

Fog lamps* 87

Lamp flashes: DSC or DTC is regulating the propul- sive forces in order to maintain driving stability 79

Handbrake engaged 51

C o

ck p

it

14

Around the center console: controls and displays

A t

a g

la n

ce

15

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

1 Microphone for hands-free telephone* 2 Initiating an emergency call* 3 Reading lamps 88

4 Glass sunroof*, electric 36

5 Interior lamps 87

6 Passenger airbag status lamp* 84

7 Microphone for voice command system* 22

8 Control Display 16

9 Hazard warning flashers

10 DTC Dynamic Traction Control 79

11 Central locking system 32

12 Automatic climate control

13 Ejecting

> Audio CD 134

> Navigation DVD 114

14 Changing

> Radio stations 138

> Track 146

16 Controller 16 Can be turned, pressed, or moved horizon- tally in four directions

17 Activating voice command system* 22

18 Opening start menu on Control Display 17

19 Drive for navigation DVD 114

20 Switching audio sources on/off and adjust- ing volume 134

21 Drive for audio CDs 134

Air distribution to the windshield 90

Air distribution to the upper body area 90

Air distribution to the footwell 90

Automatic air distribution and flow rate 90

Cooling function 92

AUC Automatic recirculated-air control 91

Recirculated-air mode 91

Maximum cooling 90

Residual heat mode 91

Air flow rate 91

Defrosting windows 91

Rear window defroster 92

15 Heated seats* 41

PDC Park Distance Control* 77

Roller sun blind* 95

iD ri

ve

16

iDrive

iDrive integrates the functions of a large num- ber of switches. This allows these functions to be operated from a single central position. The following section provides an introduction to

basic menu navigation. The control of the indi- vidual functions is described in connection with the relevant equipment.

Controls

1 Control Display

2 button Opening start menu

3 Controller The controller can be used to select menu items and to adjust settings:

> Move in four directions, arrow 4

> Turn, arrow 5

> Push, arrow 6

Operate the controller only when traffic and road conditions allow this, to avoid

endangering the car's occupants and other road users by being distracted.<

A t

a g

la n

ce

17

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

Menu overview

Communication > Telephone* > BMW Assist* or TeleService*

Navigation > Navigation system

> Onboard information, e.g. for displaying the average fuel consumption.

Entertainment > Radio

> CD player and CD changer* > External audio device

Climate > Air distribution

> Automatic program

menu > Switching off Control Display

> Tone and display settings

> Settings for traffic information

> Settings for your vehicle, e.g. for the central locking system

> Display of service requirements and dates for statutory emissions and vehicle inspec- tions

> Settings for telephone

Operating principle As of radio readiness, the following message appears on the Control Display:

Confirm the message by pressing the control- ler. This opens the start menu.

Start menu

All iDrive functions can be called up via five menu items.

Opening start menu Press the button.

To open the start menu from the menu:

Press the button twice.

iD ri

ve

18

Calling up menu items in the start menu

As of radio readiness, refer to page 49: Via the start menu you can call up the four menu items of Communication, Navigation, Entertain- ment and Climate by moving the controller for- wards, backwards, to the left or to the right. Depending on your selection, the menu last called up will be shown.

You can call up the menu by pressing the con- troller.

Convenient call-up of menu items The convenient call-up function enables you to:

> Call up a menu item from the start menu in the view last displayed

> Switch directly between Communication, Navigation, Entertainment and Climate without having to press the button

To do so, move the controller in the corre- sponding direction and hold it for longer than approx. 2 seconds.

Displays in menu

1 Each menu is subdivided into fields. The active field is highlighted.

2 A symbol indicates the start menu item last selected.

1 Menu items are usually grouped in horizon- tal or vertical lists.

2 In these lists, arrows indicate the possibility of accessing other menu items that are not currently visible.

3 Settings are represented graphically or as numerical values.

Communication

Navigation

Entertainment

Climate

menu

A t

a g

la n

ce

19

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

Selecting menu items and making adjustments

1 Selecting a menu item

2 Activating a menu item

3 Switching between fields

4 Selecting a menu item

5 Adjusting settings

Selecting a menu item Turn the controller. The highlight moves. In some cases, other menu items will be visible. Menu items shown in white can be selected by highlighting them.

Activating a menu item Press the controller. The highlighted menu item is activated. New menu items are displayed or a function is executed.

Switching between fields Move the controller slightly left, right, forward, or backward and release. The active field is highlighted and you can select any of the menu items it features or adjust settings.

Adjusting settings Turn the controller. This causes the graphical display, numerical values or text displays to change. When you change to another field or menu, the new setting is applied.

iD ri

ve

20

Status information

1 Display for:

> Entertainment: Radio, CD or

entertainment audio output off

> Telephone* in "Communication": Name of the connected portable phone, active BMW Assist call, network search or no network

2 Display for:

> New entries present in "Missed calls"* > Roaming active

3 It is possible to use the telephone* when the portable phone is paired with the vehicle

Reception strength of mobile phone network, depending on the portable phone

4 Time

Other displays: Status information is temporarily hidden during Check Control message displays or entries via the voice command system*.

Assistance window

Additional information can be displayed in the assistance window:

> The computer or the trip computer* > The arrow or map view in vehicles with nav-

igation system* > The current position

Selecting display 1. Move the controller to the right to change to

the assistance window and press the con- troller.

2. Select a menu item.

3. Press the controller.

A t

a g

la n

ce

21

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

Switching assistance window on/off 1. Move the controller to the right to change to

the assistance window and press the con- troller.

2. Select "Assist. window off" and press the controller.

To turn back on, switch to the assistance win- dow and press the controller.

Switching Control Display on/ off 1. Press the button.

This opens the start menu.

2. Press the controller to open the menu.

3. Select "Display off" and press the control- ler.

Press the controller to switch on.

V o

ic e

co m

m an

d s

ys te

m

22

Voice command system

The concept The voice command system allows you to con- trol operation of various vehicle systems with- out removing your hands from the steering wheel.

Individual menu items on the Control Display can be spoken as commands. It is not neces- sary to use the controller.

The voice command system transforms your oral commands into control signals for the selected systems and provides support in the form of instructions or questions.

The voice command system uses a special microphone located in the area of the interior rearview mirror, refer to page 14.

Precondition Via iDrive, select the language in which the voice command system is operating, so that the spoken commands can be identified. Selecting the language for iDrive, refer to page 76.

Symbol in the Owner's Manual

Saying commands

Activating voice command system 1. Press the button on the steering wheel

or in the center console.

This symbol on the Control Display and an acoustic signal indicate that the voice command system is ready to receive spo- ken commands.

2. Say the command. The text or numbers that the voice com- mand system has registered will appear on the Control Display.

*

{...} Say the specified commands word for word. {{...}} Indicates responses of the voice command system.

A t

a g

la n

ce

23

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

This symbol appears on the Control Display when you can input additional voice com- mands. If no further spoken commands are possible, continue by operating the item of equipment via iDrive.

Terminating or canceling voice command system Press the button on the steering wheel or in the center console or

Voice commands

Having the possible voice commands read aloud You can have the system read aloud the possi- ble voice commands related to the selected menu item on the Control Display. To have the possible voice commands read out to you:

For instance, if you have selected "CD", the spoken commands available for operating the CD player and CD changer are read out.

Opening help

Using alternative voice commands There are often a number of commands to run a function, e.g.:

Calling up functions immediately via short commands Short commands enable you to perform certain functions immediately, irrespective of which menu item is selected, refer to page 202.

Opening the start menu

Example: selecting a track 1. If necessary, switch on entertainment audio

output.

2. Press the button on the steering wheel or in the center console.

{Cancel}.

{Options}

{Help}

{Information menu} or {i menu}

{Main menu}

3. {Entertainment}. The system says: {{Entertainment}}.

4. {CD}. The system says: {{CD on}}.

V o

ic e

co m

m an

d s

ys te

m

24

5. Press the button on the steering wheel or in the center console.

{

Notes For information on voice control of the telephone, refer also to the separate

Owner's Manual.<

For voice commands, bear in mind the follow- ing:

> Issue the commands smoothly and at nor- mal volume, avoiding excessive emphasis and pauses.

> Always speak the commands in the lan- guage of the voice command system.

> When selecting a radio station, use the standard pronunciation of the station name.

> For entries in the voice-activated phone book, only use names in the language of the voice command system and no abbrevia- tions

> Keep the doors, windows and glass sunroof closed to prevent interference from ambi- ent noise.

> Avoid making other noise in the vehicle while speaking.

6. Select a track, e.g.: {Track 1}. The system says: {{Track 1}}.

A t

a g

la n

ce

25

R e

fe re

n ce

C o

n tr

o ls

D ri

vi n

g t

ip s

C om

m un

ic at

io ns

N av

ig at

io n

E n

te rt

a in

m e

n t

M o

b il

it y

Controls This chapter is intended to provide you with

information for complete control of your vehicle. All features and accessories that are useful for

driving and your safety, comfort and convenience, are described here.

O p

en in

g a

n d

c lo

si n

g

28

Opening and closing

Keys/remote controls

1 Each remote control has an integrated key. Power is supplied by a long-life recharge- able battery that is automatically recharged when it is in the ignition lock while the car is being driven. Consequently, you should use each remote control at least twice a year in order to keep the batteries charged. The settings called up and implemented when the car is unlocked depend on which remote control is used to unlock the car, refer to Personal Profile, next page. In addition, information about service requirements is stored in the remote con- trol, refer to Service data in the remote con- trol on page 185.

2 Spare key for storage in a safe place, such as in your wallet. This key is not intended for regular use.

3 The adapter is designed to hold your spare key. It can be connected on the inner left- hand side of the glove compartment lid. You will find more information about the adapter under Using the adapter for a spare key.

Integrated key of remote control and spare key The integrated key and spare key enable you to:

> Lock all the doors, the fuel filler door and the luggage compartment lid together, refer to page 31

> Unlock and lock the glove compartment, refer to page 96

> Unlock and lock the driver's door, for exam- ple in the event of an electrical malfunction, refer to page 31

> Unlock and lock the luggage compartment lid, refer to page 33

Removing the integrated key

Press button 1 to release the key.

Using the adapter for a spare key

The adapter is necessary for starting the car with the spare key or switching on radio readi- ness.

Before using, insert the spare key into the adapter.

New remote controls Your BMW center can supply new remote con- trols as additional units or as replacements in the event of loss.

C o

n tr

o ls

29

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Personal Profile You can set many of your BMW's functions to suit your personal needs and preferences. Without any action on your part, Personal Pro- file ensures that most of these settings are stored for the remote control currently in use. When you unlock the car, the remote control used for the purpose is recognized and the set- tings stored for it are called up and imple- mented.

This means that your personal settings are active when you return to your BMW, even if the car was used in the meantime by someone else with a remote control of their own and the set- tings were changed accordingly.

You can configure a maximum of three remote controls for three different people. The prereq- uisite for this is that each person has his or her own remote control.

Personal Profile settings For more information on specific settings, refer to the specified pages.

> Response of the central locking system when the car is unlocked, refer to page 30

> Automatic locking of the vehicle, refer to page 32

> Automatic adjustment of the driver's seat and the exterior mirrors after unlocking*, refer to page 43

> Functions assigned to the programmable buttons* on the steering wheel, refer to page 45

> 12h/24h mode of the clock, refer to page 72

> Date format, refer to page 73

> Brightness of the Control Display, refer to page 76

> Language on the Control Display, refer to page 76

> Units of measure for fuel consumption, dis- tance covered/remaining distances, and temperature, refer to page 68

> Show visual warning for Park Distance Con- trol PDC*, refer to page 77

> Automatic climate control: AUTO program, activating/deactivating cooling function and automatic recirculated-air control, setting temperature, air flow rate and distribution, refer to page 90 ff

> Audio volume, refer to page 135

> Tone control, refer to page 135

> Speed-dependent volume control, refer to page 135

Central locking system

The concept The central locking system is ready for opera- tion whenever the driver's door is closed.

The system simultaneously engages and releases the locks on the following:

> Doors

> Luggage compartment lid

> Fuel filler door

Operation of the central locking system from outside > Via the remote control

> Via the door lock

The anti-theft system is automatically activated whenever you operate the central locking sys- tem from outside the vehicle. It prevents the doors from being unlocked using the lock but- tons or door handles. The interior lamp and the courtesy lamps* are also switched on or off with the remote control. The alarm system* is also armed or disarmed. For further details of the alarm system,refer to page 34.

Operation of the central locking system from inside By means of the button for central locking, refer to page 32.

In the event of a sufficiently severe accident, the central locking system unlocks automatically. In addition, the hazard warning flashers and inte- rior lamps come on.

O p

en in

g a

n d

c lo

si n

g

30

Opening and closing: from outside

Using the remote control Protect the remote control against unau- thorized use by handing over only the

spare key, for example when using hotel valet parking.<

Because any persons or animals left unat- tended in a parked vehicle could lock the

doors from the inside, Always take the remote control with you, so that the car can be opened from the outside.<

Unlocking Press the button. You unlock the car in accordance with the set- ting stored in memory. The setting is stored for the remote control currently in use.

The interior lamp and the doors' courtesy lamps* come on.

You can set the way in which the car unlocks:

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Door locks" and press the control- ler.

5. Select "Central locking" and press the con- troller.

6. Select "Unlock button" and press the con- troller.

7. Select a menu item:

> "All doors" Press the button once to unlock the entire vehicle.

> "Driver's door only" Press the button once to unlock only the driver's door and the fuel filler door.

Press the button twice to unlock the entire vehicle.

8. Press the controller.

Convenience opening Hold the button down. The electric windows and the glass sunroof* are opened.

Locking Press the button.

Switching on interior lamps While the car is locked: Press the button. You can also use this function to locate your vehicle in parking garages etc.

Panic mode* By pressing and holding the button for more than approx. two seconds, you can trigger the alarm system in response to any impending danger.

To switch off the alarm: press any of the but- tons.

Unlocking the luggage compartment lid Press the button for about one second.

The luggage compartment lid opens a short way, regardless of whether it was locked or unlocked.

In order to avoid damage, make sure there is sufficient clearance in all directions

before opening the luggage compartment lid. A previously locked luggage compartment lid is also locked again after closing.

C o

n tr

o ls

31

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Before and after each trip, check that the lug- gage compartment lid has not been inadvert- ently unlocked.<

Setting confirmation signals You can program the vehicle to confirm when it has been locked or unlocked.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Door locks" and press the control- ler.

5. Select "Confirmation" and press the con- troller.

6. Select the desired signal.

7. Press the controller. The signal is activated.

Malfunctions The remote control may malfunction due to local radio waves. If this occurs, unlock and lock the car at the door lock with the integrated key.

If the car can no longer be locked with a remote control, the battery in the remote control is dis- charged. Use this remote control during an extended drive; this will recharge the battery, refer to page 28.

For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communications Commission regulations. Operation is gov- erned by the following:

FCC ID: LX8766S

LX8766E LX8CAS

Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

> This device must not cause harmful inter- ference, and

> This device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized modifications or changes to these devices could void the

user's authority to operate this equipment.<

Using the door lock

One turn of the key in the driver's door lock unlocks the driver's door only. Turning the key a second time unlocks all of the remaining doors, the luggage compartment lid and the fuel filler door.

Convenient operation* You can also operate the power windows and glass sunroof via the door lock. Hold the integrated key in the position for unlocking or locking.

Watch during the closing process to be sure that no one is injured. Releasing the

key stops the operation.<

Manual operation In the event of an electrical malfunction, you can lock and unlock the driver's door by turning the integrated key or the spare key to the corre- sponding limit positions in the door lock.

O p

en in

g a

n d

c lo

si n

g

32

Opening and closing: from inside

This button serves to unlock or lock doors and the luggage compartment lid, but does not acti- vate the anti-theft system. The fuel filler door remains unlocked.

You can also set the situations in which the car locks:

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Door locks" and press the control- ler.

5. Select "Central locking" and press the con- troller.

6. Select a menu item:

> "Relock door if not opened" The central locking system automati- cally locks the vehicle after a short time when no door has been opened.

> "Lock after driving" The central locking system automati-

cally locks the vehicle as soon as you start to drive.

7. Press the controller. The setting is selected.

The setting is stored for the remote control cur- rently in use.

Unlocking and opening doors > Either unlock the doors together using the

button for the central locking system and then pull the door handle above the armrest or

> pull on the door handle of each door twice: the first time unlocks the door, the second time opens it.

Locking > Use the central locking button to lock all of

the doors simultaneously, or

> press down the safety lock button of a door. To prevent you from being locked out, the open driver's door cannot be locked using the lock button.

Because any persons or animals left unat- tended in a parked vehicle could lock the

doors from the inside, Always take the remote control with you, so that the car can be opened from the outside.<

Luggage compartment lid In order to avoid damage, make sure there is sufficient clearance in all directions

before opening the luggage compartment lid.<

C o

n tr

o ls

33

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Opening from inside

Press the button: the luggage compartment lid opens unless it has been locked.

Opening from outside

Press the button, see arrow, or press the button on the remote control for approx. 1 sec- ond. The luggage compartment lid will open slightly. It can now be swung upwards.

The integrated key of the remote control and the reserve key, refer to page 28, fit the luggage compartment lid lock.

Opening manually Turn the integrated key of the remote control or the spare key all the way to the left: the luggage compartment lid opens.

If you unlock and open the luggage com- partment lid with the key while the alarm

system is armed, the alarm will be triggered. Switching off an alarm, refer to page 34.<

Locking or unlocking separately

The switch is located in the glove compartment.

1 Locking the luggage compartment lid

2 Unlocking the luggage compartment lid

Locking separately Push the switch in the direction of arrow 1. The luggage compartment lid is locked and cannot be unlocked using the central locking system. If you give the remote control without the inte- grated key to someone else while the glove compartment is locked, the luggage compart- ment lid cannot be opened. This is an advan- tage when valet parking, for example.

Unlocking separately Push the switch in the direction of arrow 2.

Emergency release

This lever releases the luggage compartment lid from inside the luggage compartment.

O p

en in

g a

n d

c lo

si n

g

34

Closing

The handle recesses on the interior trim of the luggage compartment lid make it easier to pull down.

Make sure that the closing path of the luggage compartment lid is clear, as oth-

erwise injuries may result.<

Alarm system*

The concept The vehicle alarm system responds:

> When a door, the hood or the luggage com- partment lid is opened

> To movements inside the vehicle: Interior motion sensor, refer to the information fur- ther below

> When the car's inclination changes, for instance if an attempt is made to jack it up and steal the wheels or to raise it prior to towing away

> When there is an interruption in the power supply from the battery.

The system responds to unauthorized vehicle entry and attempted theft by simultaneously activating:

> An acoustic alarm, which lasts for a period of approx. 30 seconds

> The hazard warning flashers, which operate for approx. 5 minutes*

> The high beams, which flash on and off in the same rhythm.

Arming and disarming When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time.

The system indicates that it has been correctly armed by switching on the hazard warning flashers for a single cycle and by emitting an acoustic signal.

Even when the alarm system is armed, you can open the luggage compartment lid by means of the button on the remote control, refer to page 30. When you subsequently close the lug- gage compartment lid it is again locked and monitored.

Switching off an alarm > Unlock the car with the remote control, refer

to page 30, or

> insert the remote control all the way into the ignition lock.

Indicator lamp displays

> The indicator lamp under the inside rear- view mirror flashes continuously: the sys- tem is armed.

> The indicator lamp flashes after locking: doors, hood or luggage compartment lid are not properly closed. Even if you do not close the alerted area, the system begins to mon- itor the remaining areas, and the indicator lamp flashes continuously after approx. 10 seconds. However, the interior motion sen- sor is not activated.

> The indicator lamp goes out after unlocking: your vehicle has not been disturbed while you were away.

C o

n tr

o ls

35

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

> If the indicator lamp flashes after unlocking until the remote control is inserted in the ignition, but for no longer than approx. 5 minutes: your vehicle has been disturbed while you were away.

Tilt alarm sensor and interior motion sensor

Tilt alarm sensor The tilt of the vehicle is monitored. The alarm system reacts, e.g. to attempts to steal a wheel or tow the vehicle.

Interior motion sensor In order for the interior motion sensor to func- tion properly, the windows and glass sunroof must be completely closed.

Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. This pre- vents unintentional alarms, e.g. in the following situations:

> In duplex garages

> When transporting on car-carrying trains

> When animals are to remain in the vehicle

Switching off tilt alarm sensor and interior motion sensor Press the button on the remote control twice in a row.

The indicator lamp comes on for approx. two seconds, then begins to flash steadily. The tilt alarm sensor and the interior motion sensor are switched off until the next time the vehicle is unlocked and subsequently locked again.

Windows To prevent injuries, exercise care when closing the windows and keep them in

your field of vision until they are shut. When leaving the car, take the remote control out of the ignition lock and close the doors, oth-

erwise children could operate the power win- dows and possibly injure themselves.<

Opening, closing

> Press the switch to the resistance point. The window continues to open as long as you keep the switch pressed.

> Briefly press the switch beyond the resis- tance point. The window opens automatically. Briefly press the switch again to stop the opening movement.

You can close the windows in the same manner by pulling the switch.

There are separate switches in the rear seat armrests.

After switching off the ignition You can still operate the windows:

> In radio readiness, for approx. 15 minutes

> For about one minute when the remote control is removed or the ignition and radio readiness are switched off, as long as nei- ther front door has been opened

For information on convenient operation via the remote control or door lock, refer to page 30 or 31.

Take the remote control with you when you leave the car, otherwise children

could operate the electric windows and possi- bly injure themselves.<

Anti-trapping mechanism If the closing force of an electric window exceeds a specific value as it closes, the closing

O p

en in

g a

n d

c lo

si n

g

36

action is interrupted immediately and the win- dow reopens slightly.

Despite the anti-trapping mechanism inspect the window's travel path prior to

closing it, as the safety system might fail to detect certain kinds of obstructions, such as thin objects, and the window would continue closing. Pulling the switch beyond the resistance point and holding it limits the response of the anti- trapping mechanism. In this case, if the closing force exceeds a defined threshold, the window will only open a few fractions of an inch/a few millimeters. If the switch is pulled past the resistance point again within approx. 4 seconds, the anti-trap- ping mechanism will be deactivated.<

Safety switch

With the safety switch, you can prevent the rear windows from being opened or closed via the switches in the rear passenger area, by chil- dren, for example. When the safety function is switched on, the indicator lamp comes on.

Always press the safety switch when chil- dren ride in the rear, as otherwise

unchecked closing of the windows could lead to injuries.<

Accessories in a window area If you install accessories within the power win- dow movement range, e.g. a clip-on antenna for your portable phone, the system must be initial- ized to teach it the new conditions. BMW rec- ommends having this work done by your BMW center.

Glass sunroof*, electric The glass sunroof is operational when the igni- tion is switched on, refer to page 49.

To prevent injuries, exercise care when closing the glass sunroof and keep it in

your field of vision until it is shut. Take the remote control with you and close the doors when you leave the car, otherwise chil- dren could operate the sunroof and possibly injure themselves.<

Raising Press the switch.

> When the glass sunroof is closed, it is raised slightly and the sliding visor opens slightly.

> When the glass sunroof is open, it automat- ically travels into the raised position. The sliding visor remains completely open.

Do not close the sliding visor forcibly with the roof in the raised position, as this

could damage the mechanism.<

Opening, closing > Press the switch back to the resistance

point. The glass sunroof and the sliding visor open together for as long as you hold the switch in position.

> Press the switch back past the resistance point. The glass sunroof and the sliding visor open automatically. Briefly press the switch again to stop the opening movement.

You can close the glass sunroof in a similar manner by sliding the switch forward. The slid-

C o

n tr

o ls

37

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

ing visor remains open and must be closed by hand.

For information on convenient operation via the remote control or door lock, refer to page 30 or 31.

Anti-trapping mechanism If the glass sunroof encounters an obstruction during closing from approximately the middle of the opening in the roof, or during closing from the raised position, the closing movement is interrupted and the glass sunroof is opened again slightly.

Despite the anti-trapping mechanism check and clear the sunroof's travel path

prior to closing it, as the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the sunroof would con- tinue closing. Pressing the switch beyond the resistance point and holding it there deactivates the anti- trapping mechanism.<

Following interruptions in electrical power supply After a power failure, there is a possibility that the glass sunroof can only be raised. The sys- tem must be initialized. BMW recommends having this work done by your BMW center.

Manually opening and closing In the event of an electrical malfunction, you can move the glass sunroof manually:

1. Unclip the front of the cover for the interior lamps using the screwdriver from the onboard tool kit, refer to page 187.

2. Insert the screwdriver into the openings on each side to press the clips.

3. Remove the cover panel.

4. Insert the Allen wrench supplied with the onboard tool kit, refer to page 187, into the opening provided. Turn the glass sunroof in the desired direction.

5. Reattach the cover for the interior lamps and install the cover panel.

A d

ju st

m en

ts

38

Adjustments

Sitting safely The ideal sitting position can make a vital con- tribution to relaxed, fatigue-free driving. In con- junction with the safety belts, the head restraints and the airbags, the seated position has a major influence on your safety in the event of an accident. To ensure that the safety sys- tems operate with optimal efficiency, we strongly urge you to observe the instructions contained in the following section.

For additional information on transporting chil- dren safely, refer to page 46.

Airbags Always maintain an adequate distance between yourself and the airbags. Always

grip the steering wheel on the rim, with your hands in the 3 o'clock and 9 o'clock positions, to minimize the risk of injury to the hands or arms in the event of the airbag being triggered off. No one and nothing is to come between the air- bags and the seat occupant. Do not use the cover of the front airbag on the front passenger side as a storage area. Make sure that the front passenger is sitting correctly and does not rest feet or legs on the instrument panel, otherwise leg injuries can occur if the front airbag is triggered. Never let an occu- pant's head rest near or on a side airbag because the inflating airbag could cause a seri- ous or fatal injury.<

Even if you adhere to all the instructions, inju- ries resulting from contact with airbags cannot be fully excluded, depending on the circum- stances. The ignition and inflation noise may provoke a mild hearing loss in extremely sensi- tive individuals. This effect is usually only tem- porary.

For airbag locations and additional information on airbags, refer to page 82.

Head restraint A correctly adjusted head restraint reduces the risk of neck injury in the event of an accident.

Adjust the head restraint in such a way that its center is at approx. ear level. Oth-

erwise, there is a risk of injury should an acci- dent occur.<

Safety belt Before every drive, make sure that all occupants wear their safety belts. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute.

At all times, occupants should sit upright and be properly restrained: infants and

small children in appropriate child-restraint sys- tems; larger children and adults using the safety belts. Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride in a passenger's lap. Expectant mothers should also wear the safety belt, making sure that the strap in the pelvic area is well down on the hips and does not press against the abdominal region of the body. Do not route the belt across your neck, or run it across sharp edges. Be sure that the belt does not become caught or jammed. The safety belt should not be twisted and must be positioned firmly over the pelvis and shoulder, as close to the body as possible. It should not pass over hard or fragile objects, otherwise the belt in the pelvic area could slide over the hips in the event of a head-on collision and injure the lower abdo- men. Avoid wearing bulky clothing and regularly pull the belt in the upper-body area taut, other- wise its restraining effect could be impaired.<

Safety belts, refer to page 43.

C o

n tr

o ls

39

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Seats

Note before adjusting Never attempt to adjust your seat while the vehicle is moving. The seat could

respond with unexpected movement, and the ensuing loss of vehicle control could lead to an accident. On the front passenger seat as well, do not incline the backrest too far to the rear while the vehicle is being driven, as otherwise there is a danger in the event of an accident of sliding under the safety belt, eliminating the protection normally provided by the belt.<

Comply with the instructions on head restraint height on page 40, and on damaged safety belts on page 43.

Seat adjustment Observe the adjustment instructions on page 39 to ensure the best possible per-

sonal protection.<

Longitudinal direction Pull lever 1 and slide the seat to the desired position. After releasing the lever, move the seat gently forward or back to make sure it engages prop- erly.

Height Pull lever 2 and apply your weight to the seat or lift it off, as necessary.

Backrest

Pull lever 3 and apply your weight to the back- rest or lift it off, as necessary.

Lumbar support*

You can also adjust the contour of the backrest to obtain additional support in the lumbar region.

The upper hips and spinal column receive sup- plementary support to help you maintain a relaxed, upright sitting position.

> Increase or decrease curvature: push switch forward or back.

> Shift curvature up or down: push switch up or down.

Electric seat adjustment Comply with the adjusting instructions mentioned above to ensure the best pos-

sible personal protection.<

A d

ju st

m en

ts

40

1 Longitudinal direction

2 Height

3 Angle

4 Backrest

The head restraints are adjusted manually, refer to Head restraints below.

Sports seat* On this seat, you can manually adjust the thigh support, the tilt angle and the width of the back- rest.

Thigh support

Pull the lever and move the thigh support for- ward or back.

Angle

Pull the lever and apply your weight to the seat or lift it off, as necessary.

Backrest width

You can change the width of the backrest to suit your individual preferences by adjusting the lat- eral-support pads.

Push switch forward or back. Backrest width decreases or increases accord- ingly.

Head restraints A correctly adjusted head restraint reduces the risk of neck injury in the event of an accident.

Adjust the head restraint in such a way that its center is at approx. ear level. Oth-

erwise, there is a risk of injury should an acci- dent occur.<

C o

n tr

o ls

41

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Front seats

Height adjustment

> To raise: pull up.

> To lower: press the button, arrow 1, and slide the head restraint down.

Removing 1. Pull up all the way.

2. Press the button, arrow 1, and pull the head restraint all the way out.

Rear seats

Height adjustment

> To raise: pull up.

> To lower: press the button, arrow 1, and slide the head restraint down.

The center head restraint is not height-adjust- able.

Removing 1. Pull up all the way.

2. Press the button, arrow 1, and pull the head restraint all the way out. Vehicles equipped with through-loading

system: fold the rear-seat backrest slightly forward before pulling out a head restraint.

Folding the center head restraint down and up

Folding up: Pull the head restraint.

Folding down: Press the button, arrow 1.

Note that it is an offense to drive with the rear seats occupied and the rear head

restraints folded down. Fold up the head restraints before allowing passengers to occupy the rear seats.<

Heated seats*

Press once for each temperature level. Three lamps indicate the highest temperature.

To switch off: Press button longer.

If you continue driving within the next 15 min- utes, the seat heating is automatically activated at the previously set temperature.

A d

ju st

m en

ts

42

Seat and mirror memory* You can store and call up two different combi- nations of driver's-seat and exterior-mirror positions.

Settings for the seat back width and lumbar support are not stored in memory.

Storing

1. Switch on radio readiness or the ignition, refer to page 49.

2. Adjust the seat and exterior mirrors to the desired positions.

3. Press the button. The LED in the button lights up.

4. Press the desired memory key 1 or 2. The LED goes out.

Automatic call-up You can select when the memorized positions of the driver's seat and exterior mirrors are to be called up.

> Call-up when the vehicle is unlocked

> Call-up when the driver's door is opened.

When this Personal Profile function is used, first ensure that the footwell behind

the driver's seat is free of obstacles. Failure to do so could cause injury to persons or damage to objects as a result of a rearward movement of the seat.<

The adjusting procedure is immediately halted when you press a seat adjustment switch or one of the MEMORY buttons.

You can program this via iDrive:

iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Door locks" and press the control- ler.

5. Select "Central locking" and press the con- troller.

6. Select "Last seat pos." and press the con- troller.

7. Select "After unlocking" or "After door opened".

8. Press the controller.

Manual call-up Do not call up memory while you are driv- ing, as unexpected seat movement could

result in an accident.<

Convenience mode 1. Unlock and open the driver's door or switch

on radio readiness, refer to page 49.

2. Briefly press the desired memory button 1 or 2.

The adjusting procedure is immediately halted when you press a seat adjustment switch or one of the MEMORY buttons.

Safety feature 1. Close the driver's door and switch the igni-

tion on or off, refer to page 49.

2. Press the desired memory button 1 or 2 and maintain pressure until the adjustment process has been completed.

C o

n tr

o ls

43

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

If the button was pressed accidentally: press the button again; the LED goes out.

Safety belts Observe the adjustment instructions on page 39 to ensure the best possible per-

sonal protection.<

Before every drive, make sure that all occupants wear their safety belts. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute.

On the rear seats, the center belt lock marked with the letters CENTER is solely intended for the center passenger.

Fastening Make sure you hear the latch plate engage in the belt buckle.

The upper belt anchorage is suitable for adults of any stature as long as they are sitting cor- rectly, refer to page 39.

Opening 1. Grasp the belt firmly.

2. Press the red button in the buckle.

3. Guide the belt into its reel.

'Fasten safety belts' reminder for front seats

The indicator lamp comes on and an acoustic signal sounds. In addition, a message will appear on the Control Display. Check whether the safety

belt has been fastened correctly.

The 'Fasten safety belts' reminder is issued as long as the driver's safety belt has not been fas- tened. The 'Fasten safety belts' reminder is also activated at road speeds above approx. 5 mph or 8 km/h if the front passenger's safety belt is not fastened, if heavy objects are placed on the front passenger seat, or if driver or front pas- senger unfasten their safety belts.

Damage to safety belts If the safety belts are damaged or stretched in an accident: have the entire

belt system, including the tensioning mecha- nisms, replaced at your BMW center or at a workshop that works according to BMW repair procedures with correspondingly trained per- sonnel. Have the belt anchorage points inspected for damage at the same time. Failure to observe this precaution may prevent the safety belts from effectively providing optimal protection when needed.<

Mirrors

Exterior mirrors The mirror on the front passenger's side features a lens with a more convex sur-

face than the mirror installed on the driver's side. When estimating the distance between yourself and other traffic, bear in mind that the objects reflected in the mirror are closer than they appear. This means that estimations of the distance to following traffic should not be regarded as precise.<

1 Adjustments

2 Switching to the other mirror or automatic curb monitor*

A d

ju st

m en

ts

44

The positions of the exterior mirrors are stored for the remote control currently used*, refer to Personal Profile, page 29.

Manual adjustment The mirrors can also be adjusted manually, if necessary: press the edge of the glass.

To prevent the exterior mirrors on this vehicle from being damaged, always fold

them in by hand before entering an automatic car wash.<

Automatic heating* At outside temperatures below a certain limit, both exterior mirrors are automatically heated while the engine is running or the ignition switched on.

Passenger-side mirror tilt function* automatic curb monitor

Activating

1. Push the mirror selector switch to the posi- tion for the driver's-side mirror 1.

2. Engage reverse gear or move the selector lever to position R. The glass of the mirror on the passenger side tilts slightly down. This allows the driver to see the area immediately adjacent to the vehicle such as a curb when park- ing, etc.

Deactivating Push the mirror selector switch to the position for the passenger-side mirror 2.

Interior rearview mirror

Turn the knob underneath the mirror to reduce glare from the headlamps of cars behind you when driving at night.

Automatically dimming mirrors, refer to page 107.

Steering wheel

Adjustments Do not adjust the steering wheel position while the car is in motion, or an accident

may result from any unexpected movement.<

1. Fold the lever down.

2. Move the steering wheel to the preferred height and angle to suit your seated posi- tion.

3. Swing the lever back up.

Electric steering wheel lock The steering wheel locks or unlocks automati- cally when the remote control is removed or inserted, refer to page 49.

C o

n tr

o ls

45

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Programmable buttons on the steering wheel You can program the buttons to suit your per- sonal preferences:

These settings are stored for the remote con- trol currently in use.

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Steering wheel buttons" and press the controller.

A list showing various functions is dis- played:

> "Navigation voice instructions" Voice messages from the navigation system

> "Air recirculation on / off" Permanent shut-off of outside air, refer

to Automatic recirculated-air control AUC on page 91

> "Mute on / off" To mute the audio sources

> "Monitor on / off" Switching Control Display on/off

> "Telephone list" Switch between any menu and tele- phone

> "Next entertainment source" To change the audio source

5. Select the desired function and press the controller.

6. Select a button, if appropriate, and press the controller.

.

You can operate the selected function using the corresponding button.

Operating function Briefly press the appropriate button in the steering wheel.

Voice instructions of navigation system:

> Switch voice instructions on/off: Press button for longer

> To repeat the last voice instruction: Press the button briefly

> To cancel a voice instruction during an announcement: Press the button briefly

T ra

n sp

o rt

in g

c h

ild re

n s

af el

y

46

Transporting children safely

The right place for children Do not leave children unattended in the vehicle, as they could otherwise endan-

ger themselves and/or other persons by open- ing the doors, for example.<

As a general rule, the front passenger's seat and outer rear seats are suitable for installing universal child-restraint systems for all age groups, provided that they have been approved for the age group in question.

Children always in the rear Accident research shows that the safest place for children in a vehicle is in the rear seat.

Older children should be tightly secured with a safety belt, after they have outgrown a booster seat that is appropriate for their age, height and weight.

If your BMW is equipped with rear side airbags, do not allow children to lean

towards the door trim, as serious injuries could occur if the side airbags are deployed and chil- dren are too close to the airbags.<

Deactivating rear seat side airbags Labels in the rear door opening should indicate the status of your rear seat side airbags. If you are uncertain of their status, or wish to have the airbags activated or deactivated, please contact your BMW center.

Child-restraint system in the rear Children under the age of 13 or smaller than 5 ft/150 cm may only be transported

in suitable child-restraint systems on one of the outer rear seats; otherwise, there is an increased risk of injury in the event of an acci- dent.<

Younger children should be secured in an appropriate child-restraint system that has been first properly secured to the vehicle.

All rear seating positions in your vehicle meet the recommendations of SAE J1819, an indus- try-recommended practice for securing child- restraint systems in motor vehicles.

Exception for front passenger seat Should it be necessary to use a child- restraint system on the front passenger

seat, the front passenger airbags must be deac- tivated. Otherwise, a child traveling on that seat will be at considerable risk of injury if the airbags are triggered off, even with a child-restraint sys- tem. Your vehicle is equipped with an airbag supplemental restraint system for the front pas- senger. Because the backrest on any rearward- facing child-restraint system of the kind designed for infants under 1 year and 20 Ibs./ 9 kg would be within the airbag's deployment range, you should never mount such a system in the front passenger seat, since the impact of the airbag against the child restraint's backrest could lead to serious or fatal injuries.<

For more information on automatic deactivation of the front passenger airbags refer to page 83.

Seat height Before installing a universal child-restraint sys- tem, move the front passenger's seat up as far as it will go to ensure that the safety belt will be ideally positioned. Do not change the seat height afterward.

Backrest width The backrest width of the front passen- ger's seat must be adjusted to its widest

setting.<

1. After unlocking the vehicle, sit down on the front passenger seat and close the door.

2. Adjust the backrest width to its widest set- ting, refer to page 40.

3. Install the child seat.

C o

n tr

o ls

47

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Installing child-restraint systems Before installing any child-restraint system or child seat, read the following:

Observe the child-restraint system man- ufacturer's instructions for installation

and use. Otherwise the degree of protection may be reduced. After an accident, have all parts of the child-restraint system and of the relevant vehicle safety belt system checked and replaced if necessary. Have this work done only at your BMW center or at a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.<

Commercially-available child-restraint systems are designed to be secured with a lap belt or with the lap belt portion of a combination lap/ shoulder belt. Improperly or inadequately installed restraint systems can increase the risk of injury to children. Always read and follow the instructions that come with the system.

Child seat security

All of the rear belt retractors and the front pas- senger safety belt can be locked for mounting and securing child-restraint systems.

Information regarding this is located near the buckle latch of each safety belt.

To lock the safety belt Pull the entire length of the belt from the belt retractor. Allow the reel to retract the belt somewhat and engage the buckle, then tighten the belt against the child-restraint system. The retraction mechanism is now locked.

To unlock the safety belt Release the buckle, remove the child-restraint system and allow the belt retractor to reel the belt completely in.

Child-restraint system with tether strap

If you use a child-restraint system with a tether strap, three additional tether anchorage points have been provided, refer to the arrows in the illustration. Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corresponding anchor- age point to secure the child-restraint system, as shown in the illustration below.

Placement of the tether strap

Outer sitting positions: Lift the head restraint and pass the tether strap between the head restraint and the seat back. It is recommended to readjust the head restraint into the lowest possible position.

Center sitting position: Push the center head restraint upward. Guide the tether strap between the head restraint and the rear seat back. The tether strap must be between the anchorages of the head restraint.

T ra

n sp

o rt

in g

c h

ild re

n s

af el

y

48

Then push the center head restraint into the lowest position again.

Adjust the tether strap according to the child-restraint manufacturer's instruc-

tions.<

LATCH child-restraint fixing system LATCH: Lower Anchor and Tethers for CHil- dren.

The rear outer sitting positions are provided with anchors for a LATCH child-restraint fixing system.

To attach a child-restraint system with the LATCH system, follow the operating

and safety instructions of the child-restraint system manufacturer.<

Rear seat anchorages, with through- loading system equipment

The anchorage points for the LATCH child- restraint fixing system are located behind the indicated protective caps. Flip up the corre- sponding caps.

Before attaching the LATCH child-restraint fix- ing system, pull the belt out of the area of the child-restraint fixing system.

Rear seat anchorages, without through-loading system

The anchorage points for the LATCH child- restraint fixing system are located underneath the identifying symbols.

Before attaching the LATCH child-restraint fix- ing system, pull the belt out of the area of the child-restraint fixing system.

On journeys

Child-safety locks for rear doors

Slide down the safety lever on the rear doors:

The door can now be opened from the outside only.

Safety switch for power windows Press the safety switch for the power windows, refer to page 36, if children are traveling on the rear seat.

C o

n tr

o ls

49

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Driving

Ignition lock

Insert the remote control all the way into the ignition lock.

> Radio readiness switches on. Individual electrical consumers can operate.

> The electric steering wheel lock disen- gages audibly.

Insert the remote control into the ignition lock before you move the vehicle, as oth-

erwise the electric steering wheel lock will not disengage and you will not be able to steer the car.<

Removing the remote control from the ignition lock Press the remote control in briefly; it is ejected a short way.

At the same time:

> The ignition switches off if it was on before- hand.

> The electric steering wheel lock engages audibly.

Automatic transmission You cannot take out the remote control unless the selector lever is in the P position: interlock.

Start/stop button 7

Each time the start/stop button is pressed, radio readiness or the ignition is switched on or off.

Do not depress the brake pedal or the clutch pedal, otherwise the engine will

start.<

Radio readiness Individual electrical consumers can operate. The time and the outside temperature are dis- played in the instrument cluster.

Radio readiness is switched off automatically:

> Immediately when the remote control is removed from the ignition lock

Ignition on Most of the indicator and warning lamps in the indicator area 1 of the instrument cluster, refer to page 13, light up and remain on for different lengths of time.

Radio readiness and ignition switched off All indicator and warning lamps in the instru- ment cluster go out.

Starting the engine Do not run the engine in closed rooms, as otherwise the inhaling of toxic exhaust

gases can cause unconsciousness and death.

D ri

vi n

g

50

The exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Never leave an unattended vehicle with the engine running, as such a vehicle represents a potential safety hazard. Before leaving the car with the engine running, place the transmission in idle or move the selector lever to position P and apply the hand- brake to prevent the car from moving.<

When starting the engine, do not press the accelerator pedal.

Do not allow the engine to warm up by leaving it running while the vehicle remains stationary. Instead, begin to drive immediately at a moder- ate engine speed.

Do not press either the brake pedal or the clutch pedal until you are ready to start

the engine. The engine is started immediately when you briefly touch the start/stop button and depress the brake pedal if the car has auto- matic transmission, or the clutch pedal if the car has manual transmission.< 7

Manual transmission 1. Apply the handbrake.

2. Press the clutch pedal.

If the clutch pedal is not depressed, the engine will not start.<

3. Briefly press the start/stop button.

The starter is operated automatically for a cer- tain time, and operation ceases automatically as soon as the engine has started.

Automatic transmission 1. Press the brake pedal.

2. Move the selector lever to position P or, if the ignition is switched on, to position N.

3. Briefly press the start/stop button.

The starter is operated automatically for a cer- tain time, and operation ceases automatically as soon as the engine has started.

Special starting conditions In the following situations, press the accelerator pedal halfway down when starting the engine:

> If the engine does not start on the first attempt, for instance when it is extremely hot or cold.

> The engine is started at very low tempera- tures, below approx. + 57/156, at high altitudes, above approx. 3,300 ft/1,000 m.

Avoid frequent starting in quick succes- sion or repeated start attempts in which

the engine does not start. Otherwise, the fuel is not burned or inadequately burned and there is a danger of overheating and damaging the cat- alytic converter.<

Switching off the engine Do not take the remote control out of the ignition lock while the vehicle is rolling, as

otherwise the steering wheel lock will engage when you turn the steering wheel. Always take the remote control with you when you leave the vehicle. When parking on a downhill incline, apply the handbrake, as otherwise the vehicle could roll away.<

Manual transmission 1. Apply the handbrake.

2. With the car at a standstill, briefly press the start/stop button.

3. Shift into first gear or reverse.

Automatic transmission 1. With the car at a standstill, move the selec-

tor lever to position P.

2. Briefly press the start/stop button.

3. Apply the handbrake.

C o

n tr

o ls

51

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Handbrake The handbrake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels.

Indicator lamp The indicator lamp is lit, and when you drive off an acoustic signal sounds in addition. The handbrake is still applied.

Indicator lamp for Canadian models.

Applying The lever locks in position automatically.

Releasing

Pull slightly upwards, press the button and lower the lever.

In exceptional cases, if the handbrake has to be used to slow or stop the car, do not

pull the lever up too hard. In doing so, continu- ously press the button of the handbrake lever. Too violent an application of the handbrake could lock the rear wheels and cause the rear of the car to swerve. The brake lamps do not light up when the hand- brake is applied.<

To prevent corrosion and one-sided brak- ing action, occasionally apply the hand-

brake lightly when the vehicle is slowly coming to a stop if the traffic conditions are suitable.<

Manual transmission

When shifting into 5th or 6th gear, press the gearshift lever to the right. Otherwise

the engine could be damaged if you inadvert- ently shift into 3rd or 4th gear.<

Reverse gear Select only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance has to be overcome.

Automatic transmission with Steptronic* In addition to fully automatic operation, you can also manually shift with the Steptronic, refer to page 52.

Vehicle parking To prevent the vehicle from rolling, always select position P and apply the

handbrake before leaving the vehicle with the engine running.<

Disengaging the remote control In order to remove the remote control from the ignition lock, you must first move the selector lever to position P and switch off the engine: interlock.

Selector lever positions P R N D M/S +

D ri

vi n

g

52

Displays in the instrument cluster

P R N D DS M1 to M6

The selector lever position is displayed, or the current gear in the manual mode.

Changing selector lever positions > With the ignition switched on or the engine

running, the selector lever can be moved out of position P: interlock.

> Before moving the lever away from P or N with the vehicle stationary, first depress the brake pedal, otherwise the selector lever will refuse to move: shiftlock.

To prevent the vehicle from creeping after you select a driving position,

maintain pressure on the brake pedal until you are ready to start.<

A lock prevents you from inadvertently engag- ing selector lever positions R and P. To cancel the lock, press the button on the front of the selector lever knob, refer to arrow.

P Park Select only when the vehicle is stationary. The rear wheels are locked.

R Reverse Select only when the vehicle is stationary.

N Neutral You can select this in a car wash, for example. The vehicle can roll.

D Drive, automatic position Position for normal vehicle operation. All for- ward gears are selected automatically.

Kick-down Kick-down enables you to achieve maximum performance. Press the accelerator pedal beyond the full- throttle resistance point.

Manual operation and Sport program M/S

Move selector lever from position D toward the left into the M/S shifting slot: The sport program is activated and DS appears in the instrument cluster. This position is rec- ommended for a performance-oriented driving style. When you briefly press the selector lever in the + or direction, the manual mode is activated and Steptronic changes gear. The instrument cluster shows M1 through M6.

Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected appears briefly in the instrument cluster, followed by the gear actually in use.

C o

n tr

o ls

53

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

To use the automatic function again, move the selector lever to the right into position D.

Overriding selector lever lock You can manually override the selector lever lock in case a defect occurs in which the selec- tor lever remains in position P although the but- ton on the selector lever is pressed:

1. Unclip the sleeve of the selector lever.

2. Pull the sleeve up over the selector lever until the sleeve is inside out.

3. Using the screwdriver from the onboard tool kit, refer to page 187, hold down the red lever and move the selector lever to the desired position in the usual way.

Turn signals/ headlamp flasher

1 High beams

2 Headlamp flasher

3 Turn signals

Using turn signals Press the lever beyond the resistance point.

To turn off manually, press the lever to the resistance point.

Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb

needs to be replaced. After switching off the ignition, make sure that the roadside parking lamps are not switched on.<

Signaling for a short time Press and hold the lever as far as the resistance point for as long as you wish to indicate a turn.

Triple turn signal activation Press the lever as far as the resistance point. The turn signals flash three times.

You can activate or deactivate this function.

iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Lighting" and press the controller.

5. Select "Triple turn signal activation" and press the controller.

Triple turn signaling is activated.

D ri

vi n

g

54

Wiper system

1 Switching on wipers

2 Switching off wipers or brief wipe

3 Activating/deactivating intermittent wipe or rain sensor*

4 Cleaning windshield and headlamps* 5 Setting speed for intermittent wipe, or sen-

sitivity of the rain sensor

Switching on wipers The lever automatically returns to its initial posi- tion when released.

Normal wiper speed Press once.

The system switches to operation in the inter- mittent mode when the vehicle is stationary.

Fast wiper speed Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary.

Intermittent wipe or rain sensor* If the car is not equipped with a rain sensor, the intermittent-wipe time is a preset.

If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The sensor is mounted on the windshield, directly in front of the interior rearview mirror.

Activating intermittent wipe or rain sensor

Press button 3. The LED in the button lights up.

Setting speed for intermittent wipe or sensitivity of the rain sensor Slide switch 5 up or down.

Deactivating intermittent wipe or rain sensor Press button 3 again. The LED goes out.

Deactivate the rain sensor before enter- ing an automatic car wash. Failure to do

so could result in damage caused by undesired wiper activation.<

Cleaning windshield and headlamps* Pull lever 4.

Washer fluid is sprayed onto the windshield and the wipers are operated for a short time.

When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals.

Do not use the washers if there is any danger that the fluid will freeze on the

windshield. If you do, your vision could be obscured. Antifreeze should therefore be added to the fluid, refer to Washer fluid. Do not use the washers when the washer fluid reservoir is empty, otherwise you will damage the washer pump.<

Windshield washer nozzles The windshield washer nozzles are heated automatically while the engine is running or the ignition switched on.

C o

n tr

o ls

55

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Washer fluid Washer fluid antifreeze is flammable. Always keep it well away from sparks and

open flames, and store it in tightly closed con- tainers well out of the reach of children. Comply with the instructions on the container.<

Washer fluid reservoir

Fill with water and, if required, with a washer antifreeze, according to manufacturer's recom- mendations.

Mix the water and antifreeze before filling the washer fluid reservoir to make sure

the correct concentration is maintained.<

Capacity Approx. 6.3 US quarts/6 liters.

Cruise control*

The concept Cruise control is available for use at speeds of approx. 20 mph or 30 km/h. The car then mem- orizes and maintains the speed that you specify using the lever on the steering column. In order to maintain the specified speed, the system

brakes the vehicle when the engine braking effect is insufficient on downhill gradients.

Do not use cruise control when driving conditions are unfavorable for driving at a

constant speed. Otherwise you could lose con- trol of the vehicle and cause an accident as a result. Unfavorable driving conditions include, for example, winding roads, heavy traffic or a poor road surface, e.g. snow, rain, ice or loose material.<

Manual transmission You can shift gears while cruise control is acti- vated. An indicator lamp notifies you that you should shift gears when you drive for an extended period at very high or very low engine speeds, or the system is deactivated.

One lever for all functions

1 Storing and maintaining speed or accelerat- ing

2 Storing and maintaining speed or deceler- ating

3 Deactivating cruise control

4 Resuming a speed stored beforehand

Maintaining current speed Tap the lever, arrow 1, or pull it briefly, arrow 2. The car's current speed is stored and main- tained. It is displayed in the speedometer and briefly in the instrument cluster.

On uphill gradients, it may prove impossible to maintain the set speed if current engine power output is insufficient. If the engine braking effect is insufficient on downhill slopes, the sys- tem will brake the vehicle slightly.

D ri

vi n

g

56

Increasing desired speed Tap the lever repeatedly to the resistance point or beyond, arrow 1, until the desired speed is reached.

> Each time the lever is tapped to the resis- tance point, the desired speed is increased by approx. 1 mph or 1 km/h.

> Each time the lever is tapped beyond the resistance point, the desired speed is increased to the next multiple of 5 mph or 10 km/h until a maximum of 110 mph or 180 kmh is reached.

The system stores and maintains the speed.

Accelerating using the lever Accelerating slightly:

Press the lever to the resistance point, arrow 1, until the desired speed is reached.

Accelerating significantly:

Press the lever beyond the resistance point, arrow 1, until the desired speed is reached.

The vehicle accelerates without pressure on the accelerator pedal. The system stores and maintains the speed.

Decreasing desired speed Pull the lever repeatedly to the resistance point or beyond, arrow 2, until the desired speed is reached.

> Each time the lever is pulled to the resis- tance point, the desired speed is decreased by approx. 1 mph or 1 km/h.

> Each time the lever is pulled back beyond the resistance point, the desired speed is decreased to the next multiple of 5 mph or 10 km/h until the minimum speed of 20 mph/30 km/h is reached.

The system stores and maintains the speed.

If the speed is to be reduced significantly, press the brake pedal; otherwise, decel-

eration may be insufficient and dangerous situ- ations could result.<

Deactivating cruise control Tap the lever upwards or downwards, arrow 3. The displays in the speedometer disappear.

In addition, the system is automatically deacti- vated:

> When you brake the vehicle

> When you switch gears very slowly or engage neutral gear in cars with manual transmission

> When you select the automatic transmis- sion's neutral position N

> When you activate the Dynamic Traction Control DTC

> When you deactivate the Dynamic Stability Control DSC

> When DSC or ABS is intervening

Cruise control is not deactivated by depressing the accelerator pedal. Once the accelerator pedal is released, the stored speed is achieved again and maintained.

Warning lamp The warning lamp comes on when cruise control has been automatically deactivated by pressing the brake

pedal, engaging the handbrake or as a result of DSC intervening. A message appears on the Control Display.

Resuming a speed stored beforehand Press button 4 briefly: the stored speed is resumed and maintained.

In the following instances, the stored speed is deleted and can no longer be resumed:

> When driving control systems are interven- ing

> In cars with manual transmission: when you shift gears very slowly or engage neutral gear

> In cars with automatic transmission: when you engage selector lever position N

> When the ignition is switched off

C o

n tr

o ls

57

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Displays in the instrument cluster

1 Stored speed

2 Selected speed is displayed briefly

If --- mph or --- km/h temporarily appears in the instrument cluster display, it is pos-

sible that the system prerequisites for operation are currently not met. Calling up Check Control messages, refer to page 74.<

Malfunction The warning lamp comes on when the system has failed. A message appears on the Control Display. You

can find more information starting on page 73.

Active cruise control*

The concept With active cruise control, you can select a desired speed which is not only automatically maintained when driving on open roadways, but also varied to maintain a selected distance set- ting as slower traffic is encountered.

Active cruise control is a technological advance over the familiar cruise control and is a welcome relief from the constant adjustment of speed that can accompany driving in traffic on free- ways or other high-speed thoroughfares. Espe- cially on longer trips, the system can reduce fatigue and tension, while increasing your enjoyment of driving. Please use it safely and responsibly.

Within the limits of its capability, the system automatically adapts the car's speed to that of a slower vehicle in front of you. You can specify

the distance to be maintained from the vehicle in front in four stages. For safety reasons, the distance is speed-dependent. Based on your selected distance setting, the system automat- ically decreases the throttle setting and lightly applies the brakes if necessary. The vehicle brake lamps will automatically illuminate to sig- nal a following driver to take action. In addition, it may be necessary for the vehicle or the driver to downshift, depending on the kind of trans- mission your vehicle is equipped with, to main- tain the distance setting selected. If the vehicle ahead speeds up or when the lane ahead becomes clear, your vehicle will accelerate to the speed you have selected by increasing the throttle setting and shifting gears automatically or by the driver as needed. Your selected speed will be held when driving downhill, too.

Since this active cruise control system is a new technology and operates differently from con- ventional cruise control systems which you may be accustomed to, you are strongly urged to read all of the pages relating to this system before use. Pay special attention to the System limitations section beginning on page 61.<

Braking sensation The system's automatic brake operation results in a braking sensation that is slightly different from what you feel when you brake the vehicle yourself in a similar situation. Possible noises during automatic deceleration are normal.

Manual transmission You can shift gears while cruise control is acti- vated. An indicator lamp notifies you that you should shift gears when you drive for an extended period at very high or very low engine speeds, or the system is deactivated.

Range of applications The minimum desired speed is 20 mph or 30 km/h, and the maximum speed is 110 mph or 180 km/h.

As with conventional cruise control sys- tems, active cruise control in no way

diminishes or substitutes for the drivers own

D ri

vi n

g

58

personal responsibility, alertness and aware- ness in adjusting speed, braking or otherwise controlling the vehicle. The driver should decide when to use the system on the basis of road, traffic, visibility, and weather conditions. Active cruise control is intended for use on highway-type roadways where traffic is moving relatively smoothly. Do not use this system in city driving; heavy traffic such as during rush hour; on curvy, winding roads, slippery roads or roads with sharp curves such as highway off- ramps; during inclement weather such as snow, strong rain or fog; or when entering inter- changes, service/parking areas or toll booths. It is also important to regulate your vehicle's speed and distance setting within applicable legal limits. Always be ready to take action or apply the brakes if necessary, especially when the system is actively following a vehicle in front of you. Otherwise, driving conditions could result which violate the law or pose a risk of accident.<

One lever for all functions

1 Store and increase desired speed

2 Store and decrease desired speed

3 Deactivate system, refer to page 56

4 Resume stored desired speed and dis- tance, refer to page 56

5 Select distance to vehicle driving ahead, refer to page 59

Maintaining current speed

Briefly press the lever, arrow 1, or pull it, arrow 2, at a driving speed of more than approx. 20 mph or 30 km/h. The speed at which you are currently driving will be stored and maintained. It is displayed in the speedometer and briefly in the instrument clus- ter.

On uphill gradients, it may prove impossible to maintain the set speed if current engine power output is insufficient. If the engine braking effect is insufficient on downhill slopes, the sys- tem will brake the vehicle slightly.

Adjusting desired speed Adjust your desired speed to the traffic conditions and remain ready to brake at

all times, as there is otherwise a risk of accident. Great differences in speed to the vehicle ahead, e.g. when quickly approaching a truck or when another vehicle swerves into your lane, cannot be compensated for by the system.<

Increasing in increments Tap the lever repeatedly to the resistance point or beyond, arrow 1, until the desired speed is reached.

> Each time the lever is tapped to the resis- tance point, the desired speed is increased by approx. 1 mph or 1 km/h.

> Each time the lever is tapped beyond the resistance point, the desired speed is increased to the next multiple of 5 mph or 10 km/h until a maximum of 110 mph or 180 kmh is reached.

The speed then displayed is stored and achieved, provided that the road is clear.

C o

n tr

o ls

59

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Increasing continuously Press the lever repeatedly to the resistance point or beyond, arrow 1, until the desired speed is reached. The speed then displayed is stored and reached as soon as the road ahead of you is clear.

Decreasing in increments Pull the lever repeatedly to the resistance point or beyond, arrow 2, until the desired speed is reached.

> Each time the lever is pulled to the resis- tance point, the desired speed is decreased by approx. 1 mph or 1 km/h.

> Each time the lever is pulled back beyond the resistance point, the desired speed is rounded off to the next multiple of 5 mph or 10 km/h until the minimum speed of 20 mph/30 km/h is reached.

The speed then displayed is stored and achieved, provided that the road is clear.

Selecting distance

> Press downward: Increase distance

> Press upward: Decrease distance.

The selected distance is displayed in the instru- ment cluster.

Distance 1

Distance 2

Distance 3 This distance is always set when the system is used for the first time after starting the engine.

Distance 4

Use good judgement to select the appro- priate following distance given road con-

ditions, traffic, applicable laws and driving rec- ommendations for safe following distance. Otherwise, you may be in violation of the law or an accident could result.<

Deactivating cruise control

Press the lever upward or downward, arrow 3. The displays in the speedometer disappear.

In addition, the system is automatically deacti- vated:

> When you brake the vehicle

> When the speed is reduced to below 20 mph or 30 km/h due to a traffic situation

> When you switch gears very slowly or engage neutral gear in cars with manual transmission

> When you select the automatic transmis- sion's neutral position N

> When you activate the Dynamic Traction Control DTC

D ri

vi n

g

60

> When you deactivate the Dynamic Stability Control DSC

> When DSC or ABS is intervening

> When the system does not recognize any objects for a longer period of time, e.g. on infrequently traveled roads without a shoul- der or guard rails, or if the radar sensor is covered with dirt, refer to page 61

> When you actuate the handbrake while driv- ing

When the system is deactivated, you must brake the vehicle yourself and/or

maneuver as necessary, otherwise there is a risk of accident.<

Warning lamp The warning lamp comes on when active cruise control has been auto- matically deactivated due to one of

the following factors: you are driving under a speed of 20 mph or 30 km/h, the handbrake is applied, or DSC is intervening. A message appears on the Control Display.

Resuming stored desired speed and distance Press button 4. The stored speed and distance are regained and maintained.

In the following instances, the stored speed is deleted and can no longer be resumed:

> When driving control systems are interven- ing

> In cars with manual transmission: when you shift gears very slowly or engage neutral gear

> In cars with automatic transmission: when you engage selector lever position N

> When the ignition is switched off

Displays in the instrument cluster

1 Stored desired speed

2 Shows yellow: vehicle detected ahead

Flashes in red: system cannot maintain dis- tance; driver must brake the vehicle

Flashes in yellow: driving control systems are intervening; cruise control is deacti- vated

3 Selected distance to vehicle ahead The indicator lights up as soon as the sys- tem is activated.

4 Selected desired speed is temporarily dis- played

If --- mph or --- km/h temporarily appears in the instrument cluster display, it is pos-

sible that the system prerequisites for operation are currently not met. Calling up Check Control messages, refer to page 74.<

Warning lamps The indicator 2 flashes in red; a signal sounds. The system indicates that you must brake and/or maneuver the vehicle yourself. Active cruise con-

trol cannot automatically restore the distance to the vehicle ahead. This indicator does not release you, however, from your responsibility to adapt your desired speed and driving style to prevailing driving conditions.

The indicator 2 flashes in yellow. The prerequisites for operating active cruise control are not met, e.g. as a result of ABS or DSC

C o

n tr

o ls

61

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

interventions. Active cruise control is deacti- vated. You can reactivate the system, if desired, by tapping or pulling the lever when road and traffic conditions permit this. It is not possible to resume a stored speed.

Radar sensor

The sensor's ability to detect vehicles ahead may be restricted as a result of heavy rain, dirt,

snow or ice. If necessary, clean the radar sensor located in the front bumper, see arrow. Be sure to use particular care when removing any layers of snow or ice from the sensor.

When the radar sensor is not properly posi- tioned, active cruise control cannot be activated at all.

Malfunction The warning lamp comes on when the system has failed. A message appears on the Control Display. You

can find more information starting on page 73.

System limitations

Always remember that the range and abil- ity of the system does have physical limi-

tations. It will not apply the brakes or decelerate your vehicle when there is a slow-moving vehi- cle, stopped vehicle or stationary object ahead of you, as for example, at a traffic light or a parked vehicle. Also, the system does not react to oncoming traffic, pedestrians or other types of potential traffic such as a rider on horseback. It is also possible that the system may not detect smaller moving objects such as motor- cycles or bicycles. Be especially alert when encountering any of these situations as the sys- tem will neither automatically brake, nor provide a warning to you. Also, be aware that every decrease in the distance setting allows your vehicle to come closer to a vehicle in front of

you and requires a heightened amount of alert- ness.<

Active cruise control is not and must not be used as a collision avoidance/warning

system.<

If while your vehicle is actively following a vehi- cle in front of you and the vehicle ahead speeds up or the lane ahead becomes clear, then your vehicle will accelerate to the speed you have selected. Be aware that changing to a clear, unobstructed lane will also result in your vehicle accelerating.

Be certain to deactivate the system when you pull into an exit lane for a highway off-

ramp.<

Also, vehicles traveling in a staggered manner on a highway may cause a delay in the system's

D ri

vi n

g

62

reaction to a vehicle in front of you or may cause the system to react to a vehicle actually in the lane next to you. Always be ready to take action or apply the brakes if necessary.

While active cruise control is capable of braking your vehicle automatically when

you approach a slower vehicle ahead, it is important to be aware that the ability of the sys- tem to apply the brakes is also limited, e.g. when you reduce your desired speed sharply. The system cannot stop your vehicle. It uses only a portion of braking system capacity and does not utilize the full capacity of the vehicle braking system. Therefore, the system cannot decrease your speed for large differences in speed between your vehicle and the vehicle ahead. Examples: when you approach a vehicle traveling at a much lower speed than your own speed such as approaching a toll booth or when a much slower vehicle cuts in front of you at close range.<

Active cruise control can only decelerate the vehicle to approx. 20 mph or 30 km/h.

Swerving vehicles

When a vehicle moves from an adjacent lane into your lane, active cruise control will not rec- ognize this vehicle until it is fully in your lane ahead of your vehicle.

When a vehicle ahead suddenly swerves into your lane, the system may not be able

to maintain the selected distance automatically. This also applies to great differences in speed between you and vehicles ahead, e.g. when quickly approaching a truck. There is a risk of collision. Once the system has established that a vehicle is indeed in front of you, it will indicate that you must brake and/or maneuver the vehi-

cle yourself. Take action yourself, as there is otherwise a risk of accident.<

Behavior in curves

Because of the limited range of the system, it is possible that in curves or on the peaks and val- leys of hilly roads, a vehicle ahead may be rec- ognized late, or not at all. Therefore, it is up to the driver to select a speed that is prudent in view of the curves and terrain of the roadway.

In approaching a curve, it is possible that active cruise control would react briefly to a vehicle in the adjacent lane. In addition, the system can sense if your vehicle is in a curve and may not accelerate. If your vehicle decelerates in either case, you can choose to overcome the deceler- ation by briefly pressing the accelerator pedal.

Your responsibility Your actions have priority at all times. When you press the accelerator pedal while driving with active cruise control, the automatic braking function will be temporarily interrupted. Once you release the accelerator pedal, the desired speed or the selected distance to the vehicle ahead is achieved again.

Do not leave your foot on the accelerator pedal and make sure that no objects such

C o

n tr

o ls

63

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

as floor mats are lying on the accelerator pedal. Otherwise the system may not be able to brake the vehicle.<

E ve

ry th

in g

u n

d er

c o

n tr

o l

64

Everything under control

Odometer, outside temperature display, clock

1 Resetting trip odometer

2 Outside temperature display and clock

3 Odometer and trip odometer

Units of measure To select the respective units of measure, miles or km for the odometer as well as 7 or 6 for the outside temperature, refer to page 68.

Outside temperature display, clock Setting the time, refer to page 71.

Ice warning A signal sounds when the outside temperature falls to approx. +37.57/+36; this will be accompanied by a message. Risk of icy roads.

Please bear in mind that black ice may be present on roads at temperatures higher

than +37.57/+36, e.g. on bridges and shaded roads.<

Odometer and trip odometer Resetting trip odometer: With the ignition switched on, press button 1 in the instrument cluster.

When the vehicle is parked If you still want to view the time, outside tem- perature and odometer reading briefly after the remote control has been removed from the igni-

tion lock: Press button 1 in the instrument cluster.

Tachometer

Never force the engine speed up into the red warning field, see arrow. In this range, the fuel supply is interrupted to protect the engine.

Energy Control

Displays the current fuel consumption. This allows you to see whether your current driving

C o

n tr

o ls

65

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

style is conducive to fuel economy with mini- mum exhaust emissions.

Fuel gauge

Fuel tank capacity: approx. 15.9 gallons/ 60 liters. You can find information on refueling on page 168.

If the tilt of the vehicle varies for a longer period, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly.

Reserve Once the fuel level has fallen to the reserve zone, a message will appear on the Control Dis- play for a short time and the cruising range for the remaining amount of fuel is displayed on the computer. Under a cruising range of approx. 30 miles/50 km, the message remains in the Control Display.

Refuel as soon as possible once your cruising range falls below 30 miles/

50 km, as otherwise engine functions are not ensured and damage can occur.<

Computer

Displays in the instrument cluster

To call up the information, press the button in the turn indicator stalk.

The following items of information are dis- played in the order listed:

> Cruising range

> Average speed

> Average fuel consumption

To set the corresponding units of measure, refer to Changing units of measure on page 68.

Cruising range Displays the estimated cruising range available with the remaining fuel. The range is calculated on the basis of the way the car has been driven over the last 18 miles/30 km and the amount of fuel currently in the tank.

Be sure to refuel as soon as possible once your cruising range falls below 30 miles/

50 km, as otherwise engine functions are not ensured and damage can occur.<

Average speed Periods with the vehicle parked and the engine switched off are not included in the calculations of average speed.

With the trip computer, refer to page 66, you can have the average speed for another trip dis- played.

To reset average speed: press the button in the turn indicator stalk for approx. 2 seconds.

E ve

ry th

in g

u n

d er

c o

n tr

o l

66

Average fuel consumption The average fuel consumption is calculated for the time during which the engine is running.

With the trip computer, refer to page 66, you can have the average consumption for another trip displayed.

To reset average fuel consumption: press the button in the turn indicator stalk for approx. 2 seconds.

Displays on the Control Display You can also call up the computer via iDrive; concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller to the right to call up "Navigation".

3. Select "Car Data" and press the controller.

4. Select "Onboard info" and press the con- troller.

> Estimated time of arrival at destination:

> Manually enter a distance in the com- puter, refer to information further below

> Enter a destination in the navigation sys- tem, refer to page 115

> Cruising range

> Distance to destination:

> Manually enter a distance in the com- puter, refer to information further below

> Enter a destination in the navigation sys- tem, refer to page 115

> Average speed

> Average fuel consumption

Resetting values You can reset the values for average speed and average consumption:

1. Select the respective menu item and press the controller.

2. Press the controller again to confirm your selection.

Entering a distance manually 1. Select "Distance to dest." and press the

controller.

2. Turn the controller to select the distance to your destination.

3. Press the controller to apply the setting.

The distance is automatically entered during destination guidance.

Trip computer The trip computer is suitable e.g. for a holiday trip.

1. Open the start menu.

2. Call up "Navigation".

3. Select "Car Data" and press the controller.

4. Select "Trip computer" and press the con- troller.

> Departure time

C o

n tr

o ls

67

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

> Driving time

> Distance traveled

> Average speed

> Average fuel consumption

Switching trip computer on/off and resetting all values to zero:

1. Select "Set" and press the controller.

2. Select the desired menu item and press the controller.

Display options You can display the computer or the trip com- puter in the assistance window.

1. Move the controller to the right to change to the assistance window and press the con- troller.

2. Select a menu item:

> "Onboard info"

> "Trip computer"

3. Press the controller.

E ve

ry th

in g

u n

d er

c o

n tr

o l

68

Settings and information

Operating principle

1 Button for:

> Selecting display

> Setting values

2 Button for:

> Confirming selected display or set val- ues

> Calling up computer information 65

3 When the lights are switched on: instrument lighting brightness 87

4 Calling up Check Control 73

5 Checking oil level 181

6 Setting the time 71

7 Date setting 72

8 Viewing service requirement display 69

Exiting displays The outside-temperature reading and the time reappear when you press button 2 or if you make no entries within approx. 15 seconds. If required, complete the current setting first.

Units of measure You can set units of measure. The settings are stored for the remote control currently in use, refer also to Personal Profile on page 29.

> Fuel consumption: mpg US, mpg UK, l/100 km, km/l

> Distance covered: mls, km

> Units of pressure*: psi, kPa, bar

> Temperature: 7, 6

Changing units of measure iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Units" and press the controller.

C o

n tr

o ls

69

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

5. Select the desired menu item and press the controller.

6. Select the desired measurement unit and press the controller.

Service requirements

The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition.

The extent of service work required can be read out from the remote control by

your BMW Service Advisor.<

For certain maintenance operations, you can view the respective distance remaining or due date individually in the instrument cluster.

1. Lightly push button 1 in the turn indicator stalk repeatedly up or down until the appro- priate symbol appears in the display, accompanied by the words "SERVICE- INFO".

2. Press button 2.

3. Use button 1 to scroll through the individual service items.

E ve

ry th

in g

u n

d er

c o

n tr

o l

70

Possible displays

1 Button for selecting functions

2 Viewing service requirements

3 Checking engine oil level* 4 Exhaust emissions test* 5 Roadworthiness test*

6 Microfilter

7 Spark plugs

8 Brakes, front

9 Brakes, rear

10 Brake fluid

Additional information You can have further information on the scope of maintenance displayed on the Control Dis- play, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "Service requirements" and press the controller.

5. Select "Status" and press the controller.

A list of selected maintenance operations and, if applicable, inspections required by law is dis- played.

You can request more detailed information on every entry.

C o

n tr

o ls

71

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Select the entry and press the controller.

To exit from the menu: Select the arrow and press the controller.

Symbols No service is currently required.

The deadline for service or a legally man- dated inspection is approaching. Please

arrange an appointment with your BMW center.

The service deadline has already passed.

Entering dates of statutory emissions tests and vehicle inspections* Make sure the date on the Control Display is always set correctly, refer to page 72, as other- wise the effectiveness of CBS Condition Based Service is not ensured.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "Service requirements" and press the controller.

5. Select "Status" and press the controller.

6. Select "Emission inspect." or "State inspection" and press the controller.

7. Select "Set service date" and press the controller. The month is highlighted.

8. Turn the controller to make the adjustment.

9. Press the controller to apply the setting. The year is highlighted.

10. Turn the controller to make the adjustment.

11. Press the controller to apply the setting. The date entry is stored.

To exit from the menu: Select and press the controller.

More information on the BMW Maintenance System can be found on page 185.

Clock

Setting the time

In the instrument cluster To set the 12h/24h mode, refer to Setting the time format below.

E ve

ry th

in g

u n

d er

c o

n tr

o l

72

1. Lightly push button 1 in the turn indicator stalk repeatedly up or down until the appro- priate symbol appears in the display, accompanied by the time and the word "SET".

2. Press button 2.

3. Use button 1 to set the hours.

4. Press button 2.

5. Use button 1 to set the minutes.

6. Press button 2. The system accepts the new time.

Via iDrive iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Time" and press the controller.

5. Select "Set time" and press the controller. The hours are highlighted.

6. Turn the controller to set the hours.

7. Press the controller to select the minutes.

8. Turn the controller to adjust the minutes.

9. Press the controller. The system accepts the new time.

Switching on the hour signal* You will hear three tones just before each full hour.

Select "Hour memo" and press the controller. The hour signal is activated.

Setting the time format 1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Time" and press the controller.

5. Select "Time format" and press the control- ler.

6. Select the desired format and press the controller.

Date

Date setting

In the instrument cluster To set the dd/mm or mm/dd date format, refer to Setting the date format below.

1. Lightly push button 1 in the turn indicator stalk repeatedly up or down until the appro- priate symbol appears in the display, accompanied by the date and the word "SET".

2. Press button 2.

3. Use button 1 to set the day of the month.

C o

n tr

o ls

73

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

4. Press button 2.

5. Set the month and the year in the same way.

6. Press button 2. The system accepts the new date.

Via iDrive iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Date" and press the controller.

5. Select "Set date" and press the controller. The first section of the date display is high- lighted, in this case the month.

6. Turn the controller to make the adjustment.

7. Press the controller to apply the setting. The next setting is highlighted.

8. Make the remaining adjustments. After the last adjustment, the date is stored.

Setting the date format 1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Date" and press the controller.

5. Select "Date format" and press the control- ler.

6. Select the desired format and press the controller.

Check Control

The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the sys- tems monitored. Such a Check Control mes- sage includes indicator and warning lamps in the instrument cluster and, in some circum- stances, an acoustic signal as well as text mes- sages at the bottom of the Control Display.

Indicator and warning lamps

Indicator and warning lamps can light up in both the indicator area 1 and the display 2 in various combinations and colors.

Explanatory text messages

Text messages at the lower edge of the Control Display explain the meaning of the displayed indicator and warning lamps.

E ve

ry th

in g

u n

d er

c o

n tr

o l

74

For most Check Control messages, you can view more information later, e.g. regarding the cause of a malfunction and how to respond, refer to page 75.

In urgent cases, this information will be shown immediately as soon as the corresponding lamp comes on.

To exit the displayed information: Select the arrow and press the controller.

Hiding Check Control messages

Press the button in the turn indicator stalk.

Some Check Control messages remain visible until the malfunction in question has been recti- fied. They cannot be hidden. If several malfunc- tions occur at the same time, the Check Control messages are displayed in succession.

Depending on your vehicle's equipment version, they will be displayed together

with the symbol shown here.

Other Check Control messages are automati- cally hidden after approx. 20 seconds, but remain stored.

Depending on your vehicle's equipment version, they will be displayed together

with the symbol shown here.

indicates that Check Control messages have been stored. You can view the Check Control messages whenever it is convenient for you.

Viewing stored Check Control messages

1. Lightly push button 1 in the turn indicator stalk repeatedly up or down until the appro- priate symbol appears in the display, accompanied by the words "CHECK CON- TROL".

2. Press button 2. "CHECK OK" appears if there are no Check Control messages. If a Check Control message has been stored, the corresponding lamp comes on. It is accompanied by a text message on the Control Display.

C o

n tr

o ls

75

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

3. Lightly push button 1 to check for other messages.

4. Press button 2. The display again shows the outside tem- perature and the time.

Viewing more information later iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "Check Control messages" and press the controller.

5. Select a text message and press the con- troller.

To exit the display: Select the arrow and press the controller.

Speed limit You can enter a speed, and a Check Control message will indicate when you reach this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area.

You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph or 5 km/h.

Displaying, setting or changing the limit iDrive concept, refer to page 16.

1. Open the start menu.

2. Call up "Navigation".

3. Select "Car Data" and press the controller.

4. Select "Limit" and press the controller.

5. Depending on your vehicle's equipment version, select "Change limit:" or the speed value and press the controller.

6. Turn the controller to set the limit.

7. Press the controller to apply the setting. The limit is automatically switched on.

Applying your current speed as limit Select "Select current speed" and press the controller. The system adopts your current speed as the limit.

Activating the limit Select "On" and press the controller.

Limit is activated.

Stopwatch iDrive concept, refer to page 16.

1. Open the start menu.

2. Call up "Navigation".

3. Select "Car Data" and press the controller.

E ve

ry th

in g

u n

d er

c o

n tr

o l

76

4. Select "Stopwatch" and press the control- ler.

Starting, stopping or resetting > Select "Start" and press the controller.

The stopwatch starts at the displayed time.

> Select "Reset" and press the controller. The stopwatch is reset and restarts if it was running beforehand.

> Select "Stop" and press the controller. This stops the timer.

Taking an interim time reading Select "Interim time" and press the controller. The interim time appears below the ongoing primary stopwatch count.

All of the remaining functions remain available at all times while the stopwatch

is running. The stopwatch continues operation in the background.<

Altering settings

Language on the Control Display The language on the Control Display can be set, refer to the concept on page 16. The setting is stored for the remote control currently in use.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Languages" and press the control- ler.

5. Select "Text language" and press the con- troller. You can switch to another language for the display texts and navigation mes- sages.

6. Select and activate the desired language by pressing the controller.

Brightness of the Control Display The brightness is automatically adapted to the ambient lighting conditions. Note, however, that you can change the basic setting while the low beams are switched on. The setting is stored for the remote control currently in use.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Brightness" and press the control- ler.

5. Turn the controller until the desired setting is selected.

C o

n tr

o ls

77

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Technology for driving comfort and safety

PDC Park Distance Control*

The concept The PDC assists you with maneuvering in tight parking spaces. Acoustic signals and a visual indicatorwarn you of the presence of an object in front of* or behind your car. To measure the distance, there are four ultrasonic sensors in each bumper. The sensors at the front* and at the two rear corners have a range of approx. 24 in/60 cm; the rear middle sensors have approx. 5 ft/1.50 m.

PDC is a parking aid that can indicate objects when they are approached

slowly, as is usually the case when parking. Avoid approaching an object at high speed, as otherwise physical circumstances may lead to the system warning being issued too late.<

Automatic mode With the engine running or the ignition switched on, the system is activated automatically after approx. 1 second when you engage reverse gear or move the automatic transmission selec- tor lever to position R. Wait this short period before driving.

Manual operation*

Press the button, the LED lights up.

Deactivating manual mode Press the button again; the LED goes out.

The system is automatically deactivated once the vehicle travels approx. 165 ft/50 m or

exceeds a speed of roughly 20 mph or 30 km/h; the LED goes out. You can reactivate the sys- tem manually as needed.

Signal tones When nearing an object, its position is indicated correspondingly by an interval tone. For exam- ple, the tone sounds at the rear if the system detects an object behind the car. As the dis- tance between vehicle and object decreases, the intervals between the tones become shorter. If the distance to the nearest object falls to below roughly 1 ft/30 cm, then a contin- uous tone sounds.

The warning signal is canceled after approx. 3 seconds, if you are moving parallel to a wall.

Malfunction The indicator lamp in the instrument cluster comes on. PDC is malfunc- tioning. A message appears on the

Control Display. Have the system checked.

To avoid this problem, keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively.

Manual mode The LED above the button flashes in addition.

PDC with optical warning You can also have the system show distances to objects on the Control Display. The contours of distant objects are shown on the Control Dis- play even before the acoustic signal sounds. The setting is stored for the remote control cur- rently in use.

iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

T ec

h n

o lo

g y

fo r d

ri vi

n g

c o

m fo

rt a

n d

s af

et y

78

4. Select "PDC" and press the controller.

5. Select "PDC display on" and press the con- troller.

6. The PDC screen is activated.

The display is shown on the Control Display as soon as PDC is activated.

System limitations Even with PDC, final responsibility for estimating the distance between the

vehicle and any obstructions always remains with the driver. Even when sensors are pro- vided, there is a blind spot in which objects can no longer be detected. The system is also sub- ject to the physical limits that apply to all forms of ultrasonic measurement, such as those encountered with trailer towbars and couplings, thin and wedge-shaped objects, etc. Low objects already indicated, such as a curb, may enter the sensors' dead areas before a continu- ous audible signal is given. Higher, protruding objects, such as ledges, may not be detectable. Loud sound sources outside or inside the car can drown out the PDC signal.<

Keep the sensors clean and free of ice or snow in order to ensure that they will con-

tinue to operate effectively. Do not spray the sensors for a long period of time using high-pressure cleaners and maintain a distance of at least 4 in/10 cm when spraying the sensors.<

Driving stability control systems Your BMW has a number of systems that help to maintain the vehicle's stability even in adverse driving conditions.

ABS Antilock Brake System ABS prevents locking of the wheels during braking. Safe steering response is maintained even during full braking. Active safety is thus increased.

The ABS is operational every time you start the engine. Braking safely, refer to page 107.

Electronic brake-force distribution The system controls the brake pressure in the rear wheels to ensure stable braking behavior.

DBC Dynamic Brake Control When you apply the brakes rapidly, this system automatically produces the maximum braking force boost and thus helps to achieve the short- est possible braking distance during full brak- ing. This system exploits all of the benefits pro- vided by ABS.

Do not reduce the pressure on the brake pedal for the duration of the brake application. If the brake pedal is released, DBC will be switched off.

DSC Dynamic Stability Control DSC prevents the driving wheels from losing traction when you pull away from rest or accel- erate. DSC also recognizes unstable driving conditions, for example if the rear of the car is about to swerve or if momentum is acting at an angle past the front wheels. In these cases, DSC helps the vehicle maintain a safe course within physical limits by reducing engine output and through braking actions at the individual wheels.

The laws of physics cannot be repealed, even with DSC. An appropriate driving

style always remains the responsibility of the driver. Therefore, do not reduce the additional safety margin again by taking risks.<

C o

n tr

o ls

79

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

DTC Dynamic Traction Control DTC is a version of DSC in which the drive out- put is optimized for particular road conditions, e.g. unplowed snow-covered roads. The sys- tem assures the maximal drive output, but with reduced driving stability. It is therefore neces- sary to drive with appropriate caution.

You may find it useful to briefly activate DTC under the following special circumstances:

> When driving uphill on snow-covered roads, in slush or on unplowed, snow-covered roads

> When rocking a stuck vehicle free or start- ing off in deep snow or on loose ground

> When driving with snow chains

Activating DTC

Briefly press the button; the DTC indicator lamps in the instrument cluster come on.

Deactivating DTC again Press the button again; the DTC indicator lamps in the instrument cluster go out.

Deactivating DTC and DSC together

Press the button and hold it down for at least 3 seconds; the DSC indicator lamps in the

instrument cluster light up. Stabilizing and drive-output promoting actions are no longer executed.

To increase vehicle stability, activate DSC again as soon as possible.

Reactivating DSC Briefly press the button; the indicator lamps in the instrument cluster go out.

To control If the indicator lamp flashes: DSC or DTC controls the drive forces and brake forces.

If the indicator lamps are on: Both DTC and DSC have been deac- tivated with the DTC button.

If the indicator lamps are on: DTC has been activated with the DTC button.

Malfunction in driving stability control systems

These warning lamps come on: The driving stability control systems and the Flat Tire Monitor have failed.

Proceed cautiously and drive defen- sively, avoiding full brake applica- tions. Have the system checked as

soon as possible.

Display* of this malfunction on Cana- dian models.

Display* of this malfunction on Cana- dian models.

T ec

h n

o lo

g y

fo r d

ri vi

n g

c o

m fo

rt a

n d

s af

et y

80

If the warning lamps for DSC come on. DSC including DTC and DBC is malfunctioning. The stabilizing action and brake-

servo boost are no longer available. The vehicle remains operational. Have the system checked as soon as possible.

Drive-off assistant The drive-off assistant enables you to drive off smoothly on uphill gradients. It is not necessary to use the handbrake for this.

1. Hold the car in place by pressing the brake pedal.

2. Release the brake pedal and drive off with- out delay.

The drive-off assistant holds the car in place for approx. 2 seconds after the

brake pedal is released. Depending on vehicle load, the car may roll backwards a little during this time span. Drive off without delay after releasing the brake pedal. Otherwise, the drive- off assistant will no longer hold the car in place after approx. 2 seconds and the car will start to roll backwards.<

Malfunction The warning lamps for the brake sys- tem light up in yellow. The drive-off assistant has failed. The car will not be held in place after the brake pedal

is released. Have the system checked as soon as possible.

Display of this malfunction on Cana- dian models.

Flat Tire Monitor FTM

The concept The Flat Tire Monitor monitors tire pressures while the car is being driven. The system reports any significant loss of pressure in one tire in relation to another.

If a tire loses pressure, its rolling radius changes, and this in turn alters the speed of rotation. This change is detected and is reported as a flat tire.

Functional requirement In order to assure the reliable reporting of a flat tire, the system must be initialized for the cor- rect tire inflation pressure.

The system must be reinitialized each time a tire inflation pressure has been cor-

rected or a wheel or tire has been changed.<

System limitations The Flat Tire Monitor is unable to warn the driver of sudden, severe tire damage

caused by external factors, nor can it identify the gradual loss of pressure that will inevitably occur in all four tires over a lengthy period of time.<

In the following situations, the system could be delayed or malfunction:

> System has not been initialized

> Driving on snowy or slippery road surface

> Performance-oriented style of driving: slip in the drive wheels, high lateral acceleration

> If snow chains are attached

Initializing the system The initialization is completed during driv- ing, which can be interrupted at any time.

When driving resumes, the initialization is con- tinued automatically. Do not initialize the system while snow chains are attached.<

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

C o

n tr

o ls

81

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

4. Select "FTM" and press the controller.

5. Start the engine, but do not start driving.

6. Select "Set tire pressure" and press the controller.

7. Select "Yes" and press the controller.

8. Start to drive. "Status: Active" reappears in the Control Display. Initialization is then completed while the car is in motion.

Indication of a flat tire The warning lamps come on in yellow and red. A message appears on the Control Display. In addition, an acoustic signal sounds. There is a flat

tire or substantial loss of tire pressure.

1. Cautiously reduce speed to below 50 mph or 80 km/h. Avoid sudden braking and steering maneuvers. Do not exceed a speed of 50 mph or 80 km/h.

If the car is not equipped with Run- Flat Tires, refer to page 178, the stan-

dard equipment by design, do not continue driving. Any attempt to drive on after a puncture can result in a severe accident.<

2. At the next opportunity, check the air pres- sure in all four tires.

If all four tires are inflated to the cor- rect pressures, the Flat Tire Monitor

might not have been initialized. The system must then be initialized.<

3. In the event of complete tire pressure loss, 0 psi/0 kPa, you can estimate the possible distance for continued driving on the basis of the following guidelines:

> With a light load: 1 to 2 persons without luggage: approx. 155 miles/250 km

> With a medium load: 2 persons, luggage compartment full, or 4 persons without luggage: approx. 90 miles/150 km

> With a full load: 4 or more persons, luggage compart- ment full: approx. 30 miles/50 km

Drive reservedly and do not exceed a speed of 50 mph or 80 km/h. In the event

of pressure loss, vehicle handling changes. This includes reduced tracking stability in braking, extended braking distance and altered natural steering characteristics. If unusual vibration or loud noises occur during the journey, this may be an indication that the damaged tire has finally failed. Reduce your speed and pull over to the side of the road at the earliest opportunity. Otherwise, parts of the tire could come loose and cause an accident. Do not continue driving. Contact your BMW cen- ter.<

Malfunction The warning lamps come on in yel- low. A message appears on the Con- trol Display. The Flat Tire Monitor has a malfunction or has failed. Have the

system checked as soon as possible.

Active steering*

The concept Active steering varies the turning angle of the front wheels in relation to steering wheel move-

T ec

h n

o lo

g y

fo r d

ri vi

n g

c o

m fo

rt a

n d

s af

et y

82

ments. It also varies the steering force required to turn the wheels depending on the speed at which you are driving.

When you are driving in the low road-speed range, e.g. in a town or when parking, the steer- ing angle increases, i.e. the steering becomes very direct, and less effort is required to turn the wheels. In the higher speed range, on the other hand, the steering angle is reduced more and more. This improves the handling capability of your BMW over the entire speed range.

In critical situations, the system can make tar- geted corrections to the steering angle pro- vided by the driver and thus stabilize the vehicle before the driver intervenes. This stabilizing intervention is simultaneously deactivated when DSC is switched off, refer to page 79.

Malfunction The warning lamps come on. Active steering is no longer operational. At low speeds, greater steering wheel movements are required, whereas at

higher speeds the vehicle reacts more sensi- tively to steering wheel movements. Drive cau- tiously and think well ahead. Have the system checked.

If the warning lamp lights up during the first engine starting following a power supply inter- ruption, the system must be activated by being initialized.

Initializing the system 1. Start the engine.

2. With the vehicle stationary, turn the steer- ing wheel from the straight-ahead position to the left as far as it will go and then back to the straight-ahead position.

3. Switch off the engine.

When you start the engine again, all the func- tions of Active steering are available once again.

Brake Force Display*

The brake lamps light up in two stages, depending on how sharply you apply the brakes.

> Normal braking: The brake lamps and the center brake lamp light up.

> Sharp braking: A larger part of the brake lamps' illuminating surface lights up.

Airbags

The following airbags are located under the marked covers:

1 Front airbags for driver and front passenger

2 Head airbags in front and rear

C o

n tr

o ls

83

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

3 Side airbags in the seat backrests

Protective action Observe the adjustment instructions on page 38 to ensure the best possible per-

sonal protection.<

The front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot pro- vide adequate restraint. When needed, the head and side airbags help provide protection in the event of side impact. The relevant side air- bag supports the side upper body area. The head air bag supports the head.

The airbags will purposely not be activated by every collision, e.g. not by more minor acci- dents, certain roll-over situations and rear-end collisions.

Labels in the rear door opening should indicate the status of your rear seat side

airbags. If you are uncertain of their status, or wish to have the airbags activated or deacti- vated, please contact your BMW center.<

For information on the correct sitting position, refer to page 38.

Do not apply adhesive materials to the cover panels of the airbags, cover them or

modify them in any other way. Do not attach seat covers, cushions or other objects not spe- cifically approved for seats with integral side air- bags to the front seats. Do not hang items of clothing such as coats or jackets over the back- rests. Do not attempt to remove the airbag retention system from the vehicle. Do not mod- ify the individual components of the system or its wiring in any way. This includes the uphol- stered covers on the steering wheel, instrument panel, seats and roof posts, as well as the sides of the roof lining. Do not attempt to remove or dismantle the steering wheel. Do not touch the individual components imme- diately after the system has been triggered, because there is a danger of burns. In the event of malfunctions, deactivation, or triggering of the airbag restraint system, have the testing, repair, removal, and disposal of air- bag generators executed only by a BMW center

or a workshop that works according to BMW repair procedures with correspondingly trained personnel and has the required explosives licenses. Unprofessional attempts to service the system could lead to failure in an emer- gency or undesired airbag activation, either of which could result in personal injury.<

Airbag warning information is also provided on the sun visors.

Automatic deactivation of front passenger airbags Your BMW has a seat occupation detection system. By evaluating the weight on the front passenger seat, the system detects whether or not the seat is occupied by a child in the child- restraint system or an adult.

> When a child is seated in the child-restraint system, or with an empty seat, the front and side airbags are automatically deactivated on the passenger side.

> When an adult is traveling in the front seat, the front and side airbags remain active on the passenger side.

Although not desired, it can occur in the case of heavier children that the front

passenger airbags remain active, or in the case of very light adults or young persons that the front passenger airbags are deactivated. In these cases, have the person ride in the rear seat, refer to Passenger airbag status lamp below. Do not load the passenger seat with any items in addition to the person to be trans- ported. Do not attach seat covers, seat cushion padding, ball mats or other items to the front passenger seat unless they are specifically rec- ommended by BMW. Do not place any items under the seat. Otherwise, the function of the seat occupation detection could be impaired.<

T ec

h n

o lo

g y

fo r d

ri vi

n g

c o

m fo

rt a

n d

s af

et y

84

Operational readiness of airbag system

When the remote control is inserted into the ignition lock or the car is radio-ready, refer to page 49, the warning lamp comes on briefly to indicate that the entire airbag system and the belt tensioners are operational.

Airbag system malfunction > The warning lamp does not come on after

the remote control has been inserted into the ignition switch

> Warning lamp remains permanently on

In the event of a fault in the airbag system, have it checked without delay, as other-

wise there is the risk that the system will not function as intended even if a sufficiently severe accident occurs.<

Passenger airbag status lamp

The indicator lamp located above the rearview mirror indicates whether the front passenger airbag system is active or not active/OFF.

The indicator lamp is used only for the front passenger airbag system. The indi-

cator lamp illuminates to show that the front passenger airbag system is OFF/not active.<

> The lamp illuminates briefly during startup, but then goes out if the seat is empty, or an adult or child of sufficient size is detected.

> The lamp remains illuminated when a child in a rear-facing child-restraint system is detected and indicates that the passenger airbag system is off.

If the lamp is illuminated when the seat is occupied by a very light adult or teenager,

it is recommended that the person sit in the rear.<

Find more information about the front passen- ger airbag system and seat occupancy detec- tion in the section Automatic deactivation of front passenger airbags on page 83.

C o

n tr

o ls

85

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Lamps

Parking lamps/low beams

1 Automatic headlamp control*/Adaptive Head Light*

2 Parking lamps

3 Low beams

Automatic headlamp control* When the switch is in position 1, the low beams are switched on and off automatically depend- ing on ambient light conditions, e.g. in a tunnel, in twilight, rain or snow. The LED next to the symbol is illuminated when the low beams are on.

You can leave the switch in position 1 when you switch off the engine. Once you open the driver's door while the ignition is switched off, the outside lamps automatically go out.

The low beams remain switched on inde- pendent of the ambient lighting condi-

tions when you switch on the fog lamps*.<

The automatic headlamp control cannot serve as a substitute for your personal

judgment in determining when the lamps should be switched on in response to ambient lighting conditions. For example, the system cannot detect fog. To avoid safety risks, you should always switch on the lamps manually under these conditions.<

Adjusting sensitivity iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Lighting" and press the controller.

5. Select "Auto. headlamps" and press the controller.

6. Select a menu item:

> "Sensitive"

> "Normal"

> "Slower"

7. Press the controller.

Parking lamps In switch position 2, the front, rear and side vehicle lighting is switched on. You can use the parking lamps for parking. For lighting on one side for parking as an additional feature, refer to page 86.

The parking lamps will discharge the bat- tery. Do not use them for unduly long

periods of time, as otherwise the battery might not have enough power to start the engine.<

Low beams When the switch is in position 3, the low beams are on only when the ignition is on; with the igni- tion off the parking lamps are on.

L am

p s

86

Pathway lighting If you activate the headlamp flasher after park- ing the car, with the lights switched off, the low beams come on and remain on for a certain time. You can adjust the operating period or deactivate the function using iDrive.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Lighting" and press the controller.

5. Select "Pathway lighting" and press the controller.

6. Turn the controller to select the corre- sponding duration.

7. Press the controller to apply the setting.

Daytime driving lamps* If desired, the light switch can remain in the low- beam headlamp position or the automatic headlamp control position. After you have switched off the ignition, refer to page 49, and opened the driver's door, the out- side lights switch off automatically.

Always observe all applicable laws governing the use of daytime driving lamps.

You can switch on the parking lamps when needed using the standard procedure described under Parking lamps.

Adaptive Head Light*

The concept Adaptive Head Light is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other conditions, the light from the headlamp follows the course of the road.

Activating Adaptive Head Light With the ignition on, turn the light switch to the automatic headlamp control position, refer to page 85.

To avoid dazzling the drivers of oncoming vehi- cles, Adaptive Head Light is not active when the car is driven in reverse, and directs the light to the front passenger's side when the vehicle is at a standstill.

Malfunction The LED next to the symbol for automatic head- lamp control flashes. Adaptive Head Light is malfunctioning or has failed. Have the system checked as soon as possible.

High beams/roadside parking lamps

1 High beams

2 Headlamp flasher

3 Roadside parking lamps*

Roadside parking lamps, left or right* There is an additional option of switching on the lamps on the side of the car facing the road when parked, if permitted in the country of use.

C o

n tr

o ls

87

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

With the remote control removed or with radio readiness and ignition switched off, refer to page 49, press the stalk beyond its resistance point in the appropriate direction 3. The flash- ing turn signals must remain off.

The roadside parking lamps drain the bat- tery. Do not use them for unduly long

periods of time, as otherwise the battery might not have enough power to start the engine.<

Fog lamps*

The parking lamps or low beams must be switched on for the fog lamps to operate. The green indicator lamp in

the instrument cluster lights up whenever the fog lamps are on.

The fog lamps are switched off whenever the high beams are switched on.

If the automatic headlamp control is acti- vated, the low beams will come on auto-

matically when you switch on the fog lamps.<

Instrument lighting You can adjust the brightness of the instrument lighting only when the parking lamps or the low beams are switched on.

1. Lightly push button 1 repeatedly up or down until the appropriate symbol appears in the display, accompanied by the bright- ness and the word "SET".

2. Press button 2.

3. Lightly push button 1 up or down to select the brightness; the setting is stored imme- diately.

4. Press button 2 in the turn indicator stalk. The display again shows the outside tem- perature and the time.

Interior lamps The interior lamps, the footwell lamps*, the lug- gage compartment lamp and the courtesy lamps* are controlled automatically.

The LEDs for the courtesy lampsare set in the door handles and illuminate the ground in front of the doors.

To avoid draining the battery, all lamps inside the car are switched off about

15 minutes after radio readiness is switched off, refer to Start/stop button on page 49.<

L am

p s

88

Switching interior lamps on and off manually

Interior lamps, front and rear*: To switch on and off, press the button briefly.

To switch off the lamp permanently, hold the button for the front interior lamp pressed for about 3 seconds.

Reading lamps

There are reading lamps at the front and rear*, next to the interior lamps. To switch on and off, press the button briefly.

C o

n tr

o ls

89

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Controlling the climate for pleasant driving

1 Airflow directed toward the windshield and side windows

2 Air to the upper body area Draft-free ventilation 92

3 Air to the footwell

4 Air distribution, manual

5 Temperature adjustment, left-hand side of passenger compartment

6 Maximum cooling

7 AUTO program

8 Air flow rate, manual

9 AUC Automatic recirculated-air control/ Recirculated-air mode

10 Temperature adjustment, right-hand side of passenger compartment

11 Residual heat

12 Defrosting windows and removing conden- sation

13 Switching cooling function on/off manually

14 Rear window defroster

15 Air grill for interior temperature sensor please keep clear and unobstructed

The current setting for the air distribution is dis- played on the Control Display, refer to page 90.

C o

n tr

o lli

n g

th e

cl im

at e

fo r p

le as

an t d

ri vi

n g

90

Automatic climate control

Comfortable interior climate AUTO program 7 offers the ideal air distribution and air flow rate for practically all conditions, refer to AUTO program below. All you need to do is select an interior temperature which is comfortable for you.

The following sections inform you in detail about how to adjust the settings.

Most settings are stored for the remote control currently in use, refer also to Personal Profile settings on page 29.

Adjusting air distribution manually Direct the flow of air to the win- dows, to the upper body area or to the footwell.

You can switch the automatic air distribution back on by pressing the AUTO but- ton.

Manual fine adjustments in air distribution You can set the rate of incoming airflow for manual air distribution.

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller to the left to call up "Cli- mate".

3. Select "Vent settings" and press the con- troller.

4. Select the desired area.

5. Turn the controller to set the air distribution individually.

1 Airflow directed toward the windshield and side windows

2 Air to the upper body area

3 Air to the footwell

Temperature Set the desired temperatures indi- vidually for the driver's and front passenger's sides.

The automatic climate control achieves this temperature as quickly as possi- ble regardless of the season, using maximum cooling or heating power if necessary, and then maintains it.

Avoid switching the automatic climate control system frequently from very low

to very high temperatures and vice versa. When changes are made quickly in succession, the automatic climate control does not have enough time to achieve the set temperature.<

Maximum cooling At outside temperatures above 327/06 and when the engine is running, you obtain a maximum cooling effect as soon as possible.

The automatic climate control switches to the lowest temperature and operates in recircu- lated-air mode. Air flows at maximum rate only from the vents for the upper body area. For this reason you should ensure that these vent out- lets are open before selecting this program.

AUTO program The AUTO program adjusts the air distribution to the windshield and side windows, towards the upper

body area and into the footwell for you. The air flow rate and your temperature specifications will be adapted to outside influences as a result of seasonal changes, e.g. sunlight or window condensation.

The cooling is switched on automatically with the AUTO program.

C o

n tr

o ls

91

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Intensity of the AUTO program You can set the intensity of the air supply in the AUTO program. This changes the duration of time during which the vehicle interior is heated or cooled.

1. Open the start menu.

2. Call up "Climate".

3. Select "Automatic programs" and press the controller.

4. Select the desired area.

5. Press the controller to set the desired inten- sity.

The selected intensity level of the auto- matic program is switched on.

Adjusting air flow rate manually Press the left side of the button to reduce airflow. Press the right side of the button to increase it. You can

reactivate the automatic mode for the air flow rate with the AUTO button.

Switching the system on/off With the blower at its lowest setting, press the left side of the button to switch off the auto- matic climate control. All indicators go out.

Press any button except REST to reactivate the automatic climate control.

AUC Automatic recirculated-air control/Recirculated-air mode

Set the desired operating mode by pressing this button repeatedly:

>LEDs off: outside air flows in continuously.

> Left-hand LED on, AUC mode: a sensor detects pollutants in the outside air. If nec- essary, the system blocks the supply of out- side air and recirculates the inside air. As soon as the concentration of pollutants in the outside air has decreased sufficiently, the system automatically switches back to outside air supply.

> Right-hand LED on, recirculated-air mode: the supply of outside air is permanently shut off. The system then recirculates the air currently within the vehicle.

You can activate/deactivate the recirculated-air mode by means of a freely programmable but- ton* in the steering wheel, refer to page 11.

If condensation starts to form on the inside window surfaces during operation

in the recirculated-air mode, you should switch it off while also increasing the air flow rate as required. The recirculated-air mode should not be used over an extended period of time, as otherwise the air quality inside the car will deteriorate con- tinuously.<

Using residual heat The heat stored in the engine is used to heat the passenger com- partment, e.g. while stopped at a school to pick up a child.

You can use this function for up to 15 minutes after switching off the engine if it is warm and the battery is sufficiently well charged. The out- side temperature must be below 777/256. The LED in the button comes on if these condi- tions are met and the function is activated.

Defrosting windows and removing condensation

This program quickly removes ice and condensation from the wind- shield and front side windows.

When the program is switched on, the LED comes on.

C o

n tr

o lli

n g

th e

cl im

at e

fo r p

le as

an t d

ri vi

n g

92

Switching the cooling function on and off

The cooling function cools and dehumidifies the incoming air before also reheating it as

required, according to the temperature setting. Depending on the weather, the windshield may fog over briefly when the engine is started.

The cooling function is only available when the engine is running and is switched on automati- cally with the AUTO program.

Rear window defroster When the rear window defroster is switched on, the LED comes on. The defroster switches off auto-

matically after a certain time.

Ventilation

1 Use the knurled wheels to smoothly open and close the air vents

2 Use the lever to change the direction of the airflow

3 Knurled wheel for more or less cool air from the vents for the upper body area

Ventilation for cooling Adjust the vent outlets to direct the flow of cool air in your direction, for instance if it has become too hot in the car.

Draft-free ventilation Set the vent outlets so that the air flows past you and not straight at you.

Ventilation in the rear

1 Use the knurled wheel to smoothly open and close the air vents

2 Use the knurled wheel to adjust the temper- ature:

> Turn toward blue: colder

> Turn toward red: warmer

3 Use the lever to change the direction of the airflow

Microfilter/activated-charcoal filter The microfilter traps dust and pollen in the incoming air. The activated-charcoal filter pro- vides additional protection by filtering gaseous pollutants from the outside air. Your BMW cen- ter replaces this combined filter during routine maintenance. You can call up further information in the service requirements display, refer to page 69.

C o

n tr

o ls

93

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Practical interior accessories

Integrated universal remote control*

The concept The integrated universal remote control can replace as many as three hand-held transmit- ters for various remote-controlled devices, such as door openers and house alarm sys- tems. The integrated universal remote control registers and stores signals from the original hand-held transmitters.

The signal of an original hand-held transmitter can be programmed on one of the three mem- ory buttons 1. After this, the programmed memory button 1 will operate the system in question. The LED 2 flashes to confirm trans- mission of the signal.

Should you sell your vehicle one day, be sure to delete the stored programs beforehand for your safety, refer to page 94.

To prevent possible damage or injury, before programming or using the inte-

grated universal remote control, always inspect the immediate area to make certain that no peo- ple, animals or objects are within the pivoting or travel range of the device being operated. Com- ply also with the safety instructions supplied with the original hand-held transmitter.<

Checking compatibility If this symbol appears on the package or in the instructions supplied with the original hand-held transmitter, you can

assume that the radio remote control device will be compatible with the integrated universal remote control.

If you have additional questions, please consult your BMW center or call 1-800-

355-3515. You can also visit these websites: www.bmwusa.com or www.homelink.com.

HomeLink is a registered trademark owned by Johnson Controls, Inc.<

Programming

1 Memory buttons

2 LED

Fixed-code hand-held transmitters 1. Switch on the ignition, refer to page 49.

2. When starting operation for the first time: Press both outer memory buttons 1 for approx. 20 seconds until the LED 2 flashes. All stored programs are cleared.

3. Hold the original hand-held transmitter at a distance of approx. 2 to 8 in/5 to 20 cm from the memory buttons 1.

The required distance between the hand-held transmitter and the mem-

ory buttons 1 depends on the system of the respective original hand-held transmitter used.<

4. Simultaneously press the transmit key on the original hand-held transmitter and the desired memory button 1 on the integrated universal remote control. The LED 2 flashes slowly at first. As soon as the LED 2 flashes rapidly, release both buttons. If the LED 2 does not flash rapidly after approx. 15 sec- onds, alter the distance.

5. To program other original hand-held trans- mitters, repeat steps 3 and 4.

P ra

ct ic

al in

te ri

o r a

cc es

so ri

es

94

The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.

You can operate the system when the engine is running or when the ignition is switched on.

If the system fails to function even after repeated programming, check whether

the original hand-held transmitter uses an alter- nating-code system. To do so, either read the instructions for the original hand-held transmit- ter or hold down the programmed memory button 1 of the integrated universal remote control. If the LED 2 on the integrated universal remote control flashes rapidly for a short while and then remains lit for about two seconds, the original hand-held transmitter uses an alternat- ing-code system. If it uses an alternating-code system, program the memory buttons 1 as described under Alternating-code hand-held transmitters.<

Alternating-code hand-held transmitters To program the integrated universal remote control, consult the operating instructions for the device to be set. You will find information there on the possibilities for synchronization. When programming hand-held transmitters

that employ an alternating code, please observe the following supplementary instructions:

Programming will be easier with the aid of a second person.<

1. Park your vehicle within the range of the remote-controlled device.

2. Program the integrated universal remote control as described above in the section Fixed-code hand-held transmitters.

3. Locate the button on the receiver of the device to be set, e.g. on the drive unit.

4. Press the button on the receiver of the device to be set. After step 4, you have approx. 30 seconds for step 5.

5. Press the programmed memory button 1 of the integrated universal remote control three times.

The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.

If you have any questions, please contact your BMW center.<

Deleting stored programs Press both outer memory buttons 1 for approx. 20 seconds until the LED 2 flashes: all stored programs are cleared.

It is not possible to clear individual programs.

Interior rearview mirror with digital compass*

1 Adjustment button

2 Display

The display shows you the main or subcardinal direction in which you are driving.

Setting compass zones Depending on the vehicle's geographic loca- tion, the relevant compass zone must be set. Refer to the world map with compass zones below.

C o

n tr

o ls

95

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

To set a compass zone, press the adjustment button on the bottom of the interior rearview mirror with a pointed object, such as a pen, for approx. 3-4 seconds. The number of the com- pass zone set is shown in the display.

To change the zone setting, press the adjust- ment button repeatedly until the display shows the number of the compass zone in which you are currently driving:

The compass is operational again after approx. 10 seconds.

For information on the automatic dimming fea- ture, refer to Interior and exterior mirrors, auto- matic dimming feature, page 107.

Calibrating the digital compass The digital compass must be calibrated in the following situations:

> C or CAL is displayed.

> The compass shows the wrong cardinal direction.

> The cardinal direction shown does not change although the direction of travel does.

> Not all cardinal directions are shown.

Procedure 1. Make sure that no large metal objects or

overhead power lines are in the vicinity of your vehicle and that you have enough space to drive in a circle.

2. Set the currently valid compass zone.

3. Press the adjustment button to call up C or CAL. Then drive in one full circle at a speed of no more than 4 mph or 7 km/h. If calibration is successful, the C or CAL dis- play is replaced by the cardinal directions.

Roller sun blinds*

Rear window blind

Tap the button in the center console to raise or lower the roller sun blind.

P ra

ct ic

al in

te ri

o r a

cc es

so ri

es

96

Roller sun blind for rear side window Pull loop of roller sun blind and hook onto bracket.

Glove compartment

Opening

Pull the handle. The light in the glove compartment switches on.

Closing Fold the cover up.

To prevent injury in the event of an acci- dent while the vehicle is being driven,

close the glove compartment immediately after use.<

Locking To lock the glove compartment, use the inte- grated key of the remote control or the spare key, refer to page 28.

Rechargeable flashlight* It is on the left-hand side of the glove compart- ment. The flashlight can remain plugged in. Whenever required, pull the flashlight out of its socket.

Only insert the flashlight back into the socket when it is switched off, as other-

wise there is a risk of damage.<

Center armrest

Storage compartment The center armrest between the front seats contains either a compartment or a portable- phone holder*, depending on the equipment version.

Opening Press the button, see arrow. The lid opens.

C o

n tr

o ls

97

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Ventilated storage compartment

The storage compartment in the center armrest can be ventilated: push the switch to position 1.

The temperature is controlled via the knurled wheel 2 for rear ventilation, refer to page 92.

Connection for external audio device You can connect an external audio device such as a CD or MP3 player and play audio tracks over the car's loudspeaker system, refer to page 149.

Storage compartments inside the vehicle There are also compartments beside the steer- ing column*, in the front doors and in the center console*. There are nets* on the front-seat backrests.

Clothes hooks There are clothes hooks on the grab handles in the rear passenger compartment.

Items of clothing hung from the hooks must not obstruct the driver's view. Do

not hang heavy objects from the hooks, as they could endanger the car's occupants, e.g. in case of heavy braking or sudden swerving.<

Storage spaces in the luggage compartment Left storage compartment, suitable e.g. for storing a box of cleaning tissues or up to 12 CD cases, depending on vehicle equipment ver- sion.

The lashing eyes in the luggage compartment provide you with a way to attach luggage com- partment nets* or flexible straps* for securing suitcases and luggage, refer to page 109.

Raising the floor panel Press the floor panel against the top of the lug- gage compartment; a locking device holds the floor panel in place. To detach the floor panel, pull it out of the locking device.

Equipment version with drawer:

Take the retaining strap on the right-hand side of the drawer out of the bracket and use it to fix the floor panel in place.

Do not exceed the maximum permissible load of 55 lbs/25 kg for the storage com-

partment under the floor panel, as otherwise damage could result.<

Storage package* The luggage compartment also offers these additional storage options:

> Hooks for hanging up, e.g., shopping bags or tote bags

> Rubber strap on the left trim panel for securing small objects such as a folding umbrella

> Net for small objects on the right trim panel

> Retaining straps next to the rear lashing eyes, e.g. for securing an umbrella

> Folding, removable box under the floor panel, e.g. for wet or dirty items

> Insertable dividing elements for the storage compartment under the floor panel

> Luggage net, attachable to the mountings on the floor panel

> Drawer for storing small items. Pull the han- dle firmly to release the drawer. If neces-

P ra

ct ic

al in

te ri

o r a

cc es

so ri

es

98

sary, you can pull out the drawer entirely, refer to the information below

Do not drive or close the luggage com- partment lid while the drawer is pulled

out. On uphill gradients, release the drawer with caution, as otherwise it could slide out on its own and cause injury. Do not exceed a maximum load of 11 lbs/5 kg for the drawer, as otherwise damage could result.<

Removing the drawer 1. Push the drawer all the way in.

2. Turn the catches on the left and right all the way out.

3. Remove the drawer by pulling it down and backwards.

Reinserting the drawer 1. Hook the guides of the drawer into the front

of the yellow guide aids on the underside of the luggage compartment.

2. Insert the catches into the mounts on the underside of the luggage compartment.

3. Turn the catches on the left and right all the way in.

Cup holders Do not place glassware in a cup holder; otherwise there is an increased risk of

injury in the event of an accident.<

Front

Opening Briefly press the center of the cover.

Closing Briefly press the cover in the center and push in the cup holder.

Rear There are two additional cup holders in the rear center armrest.

Ashtray, front

Opening

Push the projection on the cover.

C o

n tr

o ls

99

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Emptying

Lift out the insert.

Lighter

With the engine running or the ignition switched on, press in the cigarette lighter.

The lighter can be removed as soon as it pops back out.

Hold or touch the hot cigarette lighter by the knob only. Holding or touching it in

other areas could result in burns. When leaving the car, always remove the remote control so that children cannot operate the cigarette lighter and possibly burn them- selves.<

Ashtray, rear

Opening

Push the projection on the cover.

Emptying Lift out the insert.

Connecting electrical appliances

Cigarette lighter socket* With the ignition switched on, the cigarette lighter socket can be used as a power outlet for a flashlight, car vacuum cleaner, etc., rated up to about 200 watts at 12 V. Remove the cigarette lighter prior to using the socket. Avoid damag- ing the socket by attempting to insert plugs of unsuitable shape or size.

Rear center console*

To gain access to the power socket: Remove the corresponding cover.

P ra

ct ic

al in

te ri

o r a

cc es

so ri

es

100

In the luggage compartment*

To gain access to the power socket: Open the cap.

Through-loading system*

Opening 1. Open the belt lock of the rear center safety

belt. To do so, press the button, see arrow, and release the latch plate.

2. Insert the latch plate at the end of the belt into the specially designated fixture on the rear window shelf.

3. Push the corresponding head restraint down as far as it will go, refer to page 41.

4. To release the rear seat back, pull the corre- sponding lever in the luggage compart- ment.

5. The unlocked rear seat back moves forward slightly. Fold the seat back forward by the head restraint.

Closing 1. Return the rear seat back to its upright posi-

tion and engage it.

When returning the backrest into its seating position, make sure that the

seat's locking mechanism engages prop- erly. Otherwise, cargo could be thrown around in the event of sharp braking or swerving and endanger the occupants.<

2. Release the latch plate from the fixture on the rear window shelf and insert it into the belt lock of the center safety belt. Make sure you hear the latch plate engage in the belt buckle.

C o

n tr

o ls

101

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

The lashing eyes in the luggage compartment provide you with a way to attach luggage com- partment nets* or draw straps for securing suit- cases and luggage, refer to page 109.

Ski bag* Designed for safe, clean transport of up to 4 pairs of standard skis or up to 2 snowboards.

With the ski bag you can stow skis with a length of up to 6 ft 10 in/2.10 m. When skis of 6 ft 10 in/ 2.10 m length are loaded, the overall capacity of the ski bag is reduced due to its tapered design.

Loading 1. Fold down the center armrest.

2. Press the button, reach into the recess and fold down the cover.

3. Open the Velcro fastener, spread the ski bag between the front seats and insert the skis or snowboards. The zip fastener makes objects in the ski bag easier to reach.

4. Insert the latch plate of the ski bag's retain- ing strap in the center belt buckle.

Make sure to load only clean skis into the ski bag. Wrap sharp edges to prevent damage.

Securing cargo

After loading, secure the ski bag and its con- tents. Tighten the retaining strap on the ten- sioning buckle for this purpose.

Secure the ski bag in the manner described, as otherwise it could endanger

the car's occupants, e.g. in case of heavy brak- ing or sudden swerving.<

To store the ski bag, perform the steps described for loading in reverse order.

Removing the ski bag The ski bag can be completely removed, e.g. for faster drying or to allow you to use other inserts.

P ra

ct ic

al in

te ri

o r a

cc es

so ri

es

102

1. Fold down the center panel in the rear seat backrest.

2. Pull the handle, arrow 1.

3. Pull out the insert, arrow 2.

For more information on the various inserts available, contact your BMW cen-

ter.<

C o

n tr

o ls

103

R e

fe re

n ce

A t

a g

la n

ce D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Driving tips This section provides you with information

useful in dealing with specific driving and operating conditions.

T h

in g

s to

re m

em b

er w

h en

d ri

vi n

g

106

Things to remember when driving

Break-in period Moving parts need breaking-in time to adjust to each other. Please follow the instructions below in order to achieve the optimal service life and economy of operation for your vehicle.

Engine and differential Up to 1,250 miles/2,000 km: Attempt to vary both engine and vehicle speeds, but refrain from exceeding an engine speed of 4,500 rpm or a driving speed of 100 mph or 160 km/h.

Always obey all official speed limits.

Avoid full-throttle operation and use of the transmission's kick-down mode.

Once you have driven 1,250 miles/2,000 km, the engine and vehicle speeds can be gradually increased.

Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac- tion potential until after an initial break-in period. Therefore, drive reservedly during the first 200 miles/300 km.

Brake system Brakes require an initial break-in period of approx. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and rotors. Drive with caution during this break- in period.

Clutch The function of the clutch reaches its optimal level only after a distance driven of approx. 300 miles/500 km. During this break-in period, engage the clutch gently.

Following part replacement The same break-in procedures should be observed if any of the components mentioned

above have to be renewed in the course of the vehicle's operating life.

General driving notes

Closing the luggage compartment lid Operate the vehicle only when the lug- gage compartment lid is completely

closed. Otherwise, exhaust fumes could enter the interior of the vehicle.<

If special circumstances make it absolutely nec- essary to drive with the luggage compartment lid open:

1. Close all windows and the glass sunroof.

2. Increase the air flow rate of the automatic climate control considerably, refer to page 91.

Hot exhaust system As in all vehicles equipped with a catalytic converter, extremely high temperatures

are generated in this vehicle. Do not remove the heat shields installed adjacent to various sec- tions of the exhaust system, and never apply undercoating to them. When driving, standing at idle and while parking, take care to avoid pos- sible contact between the hot exhaust system and any highly flammable materials such as hay, leaves, grass, etc. Such contact could lead to a fire, with the risk of serious personal injuries and property damage.<

Portable phone in the vehicle BMW discourages the use of mobile communications devices, e.g. portable

phones, inside the vehicle without a direct con- nection to an outside antenna. Otherwise, the vehicle electronics and mobile communication device can influence one another. In addition, there is no assurance that the radiation which results from transmission will be dissipated from the vehicle interior.<

D ri

vi n

g t

ip s

107

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Interior and exterior mirrors, automatic dimming feature*

The automatic dimming feature of the interior and exterior mirrors* is controlled by two photo cells in the interior rearview mirror. One photo cell is in the mirror frame, see arrow; the other is on the back of the mirror.

In order to ensure that the system functions correctly, keep the photo cells clean, do not cover the area between the interior rearview mirror and windshield, and do not affix adhesive labels or stickers of any kind to the windshield directly in front of the mirror.

Hydroplaning When driving on wet or slushy roads, reduce road speed. If you do not, a wedge

of water can form between tires and road sur- face. This situation, known as hydroplaning, means that the tire can actually lose contact completely with the road surface, so that nei- ther the car can be steered nor the brake be properly applied.<

The risk of hydroplaning increases with declin- ing tread depth on the tires, refer also to Mini- mum tread depth on page 177.

Driving through water Drive through water on the road only if it is not deeper than 1 ft/30 cm, and then only

at walking speed at the most. Otherwise, the vehicle's engine, the electrical systems and the transmission may be damaged.<

Using handbrake on inclines On inclines, do not hold the vehicle with the clutch; use the handbrake. Otherwise

greater clutch wear will result.<

Also use the drive-off assistant, refer to page 80.

Braking safely Your BMW is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations in which this is necessary. Since the vehicle maintains steering responsiveness, you can still avoid possible obstacles with a minimum of steering effort.

Pulsation of the brake pedal, combined with sounds from the hydraulic circuits, indicate that ABS is in its active mode.

Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles. Monitor traffic conditions to ensure that this maneuver does not endanger other road users. The heat generated in this process helps dry the pads and rotors to ensure that full braking efficiency will then be available when you need it.

Hills To prevent overheating and the resulting reduced efficiency of the brake system,

drive long or steep downhill gradients in the gear in which the least braking is required. Even light but consistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure.<

You can increase the engine's braking effect by shifting down, all the way to first gear if neces- sary. This strategy helps you avoid placing excessive loads on the brake system. Down- shifting in manual mode of the automatic trans- mission, refer to page 52.

Never drive with the clutch pedal held down, with the gearshift lever or selector

lever in neutral or with the engine switched off; engine braking action will not be present with

T h

in g

s to

re m

em b

er w

h en

d ri

vi n

g

108

the transmission in neutral and there will be no power assistance to the brakes or steering while the engine is switched off. Never allow floor mats, carpets or any other objects to protrude into the area around the accelerator and brake pedals and obstruct their movement.<

Corrosion on brake rotors When the vehicle is driven only occasionally, during extended periods when the vehicle is not used at all, and in operating conditions where brake applications are less frequent, there is an increased tendency for corrosion to form on rotors, while contaminants accumulate on the brake pads. This occurs because the minimum pressure which must be exerted by the pads during brake applications to clean the rotors is not reached.

Should corrosion form on the brake rotors, the brakes will tend to respond with a pulsating effect that even extended application will fail to cure.

When the vehicle is parked Condensation forms while the automatic cli- mate control is in operation, and then exits under the vehicle. Traces of condensed water under the vehicle are therefore normal.

Before driving into a car wash For general information about taking care of your BMW, refer to the Caring for your vehicle brochure.

Cargo loading To avoid loading the tires beyond their approved carrying capacity, never over-

load the vehicle. Overloading can lead to over- heating and increases the rate at which damage develops inside the tires. The ultimate result can assume the form of a sudden blow-out.<

Determining loading limit

1. Locate the following statement on your vehicle's placard*:

The combined weight of occupants and cargo should never exceed

XXX kg or YYY lbs. Otherwise, overloading can result in damage to the vehicle and unstable driving conditions.<

2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.

3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.

4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the YYY amount equals 1,400 lbs. and there will be five 150 lbs. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs.: 1,400 lbs. minus 750 lbs. = 650 lbs.

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4.

6. If your vehicle will be towing a trailer, part of the load from your trailer will be transferred to your vehicle. Consult the manual for transporting a trailer to determine how this may reduce the available cargo and luggage load capacity of your vehicle.

D ri

vi n

g t

ip s

109

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Load

The permissible load is the total of the weight of occupants and cargo/luggage. The greater the weight of the occupants, the less cargo/lug- gage can be transported.

Stowing cargo

> Position heavy objects as low and as far for- ward as possible, ideally directly behind the respective seat backs.

> Cover sharp edges and corners.

> For very heavy cargo when the rear seat is not occupied, secure each safety belt in the opposite buckle.

Securing cargo

> Smaller and relatively light items can be retained with tensioning straps or draw straps*.

> Heavy-duty cargo straps* for securing larger and heavier objects are available at your BMW center. Four lashing eyes are provided for attaching the cargo straps. Two lashing eyes are locatedon the rear panel of the luggage compartment 1, two others areon the side panels of the luggage compartment 2. Comply with the information supplied with the cargo straps.

Always position and secure the cargo as described above, so that it cannot endan-

ger the car's occupants, for example if sudden braking or swerves are necessary. Never exceed either the approved gross vehicle weight or either of the approved axle loads, refer to page 201, as excessive loads can pose a safety hazard, and may also place you in viola- tion of traffic safety laws. Heavy or hard objects should not be carried loose inside the car, since they could be thrown around, for example as a result of heavy braking, sudden swerves, etc., and endanger the occu- pants.<

Roof-mounted luggage rack* A special rack system is available as an option for your BMW. Please comply with the precau- tions included with the installation instructions.

T h

in g

s to

re m

em b

er w

h en

d ri

vi n

g

110

Mounting points

Open the covers.

Loading roof-mounted luggage rack Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. You should therefore always remember not to exceed the approved roof load capacity, the approved gross vehicle weight or the axle loads when loading the rack.

You can find the specified weights on page 201.

The roof load must be uniformly distributed and should not be too large in area. Heavy items should always be placed at the bottom. Be sure that adequate clearance is maintained for rais- ing the glass sunroof, and that objects do not project into the opening path of the luggage compartment lid.

Secure roof-mounted cargo correctly and securely to prevent it from shifting or falling off during the trip.

Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gently.

D ri

vi n

g t

ip s

111

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Navigation This chapter describes how you can

enter destinations and specify your route so that your navigation system guides you

reliably to your destination.

S ta

rt in

g th

e n

av ig

at io

n s

ys te

m

114

Starting the navigation system

Your navigation system can use satellites to ascertain the precise position of your vehicle and guide you reliably to any destination you enter.

Navigation DVD The navigation system requires a special navi- gation DVD. You can obtain the latest version at your BMW center.

Inserting navigation DVD

1. Insert the navigation DVD with the labeled side up.

2. Wait for several seconds to allow the con- tents of the DVD to be read in.

Removing navigation DVD 1. Press button 1.

The DVD emerges slightly from the drive.

2. Remove the DVD.

If the DVD is not ejected from the drive, it is pos- sible that it is blocked.

Display in the assistance window You can display the route or the current position in the assistance window. This display remains visible even if you change to another applica- tion.

1. Move the controller to the right to enter the assistance window.

2. Press the controller. Other menu items are displayed.

3. Select the desired route view or "Current position".

4. Press the controller.

The contents of the assistance window are con- tinually updated as you drive.

*

N av

ig at

io n

D ri

vi n

g t

ip s

115

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Destination entry

In entering your destination you can select from among the following options:

> Entering a destination manually, see below

> Selecting destination using information, refer to page 119

> Selecting destination from a list, refer to Destination list, page 120

> Selecting destination from address book, refer to page 121

> Selecting home address, refer to page 122

After selecting your destination you can pro- ceed to start the destination guidance, refer to page 125.

Operating navigation system Enter data only when the vehicle is sta- tionary, and always give priority to the

applicable traffic regulations in the event of any contradiction between traffic and road condi- tions and the instructions issued by the naviga- tion system. If you do not observe this precau- tion, you may be in violation of the law, and can endanger vehicle occupants and other road users.<

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller to the right to call up "Navigation".

3. Select "Navigation" and press the control- ler.

Entering a destination manually The system's word-matching principle makes it easier for you to enter the names of streets or towns, refer to page 124. This allows you to enter different spellings and completes your entry automatically so that stored names can be called up quickly.

1. Select "Navigation" and press the control- ler. "New destination" is selected.

2. Press the controller.

D es

ti n

at io

n e

n tr

y

116

3. Select "Enter address" and press the con- troller.

The system also supports you with the follow- ing features:

> If you do not enter a street, the system will guide you to the downtown area of a town or city.

> You can skip the entry of country and local- ity if the current entries should be retained for your new destination.

Selecting country 1. Select "State / Province" or the country dis-

played and press the controller. The list of available countries appears on the display.

2. Select the country of destination and press the controller.

In order to be able to start the destination guid- ance, at least the town/city of the destination or its zip code must be entered.

Entering destination 1. Select "Town / City" or the town/city dis-

played and press the controller.

2. Select the starting letter and press the con- troller.

A list of all towns/cities starting with this let- ter appears on the Control Display.

3. If necessary, input more letters. The list gradually grows smaller each time you enter a new letter.

> To enter spaces: Select the symbol and press the con- troller.

> To delete individual numbers or letters: Move the controller toward the right to select , and press the controller.

> To delete all numbers or letters: Move the controller toward the right to select , and hold the controller down.

4. If necessary, move the controller backwards until the third field from the top is high- lighted. Turn the controller until the city or town name is selected from the list and press the controller.

N av

ig at

io n

D ri

vi n

g t

ip s

117

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Inputting destination by zip code 1. Select "Town / City" and press the control-

ler.

2. Input the zip code: Select the desired digits and press the con- troller.

> To enter spaces: Select the symbol and press the con- troller.

> To delete individual numbers or letters: Move the controller toward the right to select , and press the controller.

> To delete all numbers or letters: Move the controller toward the right to select , and hold the controller down.

3. Select the zip code and press the controller. The corresponding destination is displayed.

4. If necessary, move the controller backwards until the third field from the top is high- lighted. Turn the controller until the desti- nation is selected and press the controller.

Entering street, house number and intersection 1. Select "Street" or the street displayed and

press the controller.

2. Enter the street. The street is entered in the same manner as the town or city.

After the street you can also enter the intersec- tion or the house number.

The intersection is entered in the same way as the street.

To enter the house number:

1. Select "House number" and press the con- troller.

2. To enter the house number: Select the desired digits and press the con- troller.

> To enter spaces: Select the symbol and press the con- troller.

> To delete individual numbers or letters: Move the controller toward the right to select , and press the controller.

> To delete all numbers or letters: Move the controller toward the right to select , and hold the controller down.

3. If necessary, move the controller backwards until the third field from the top is high- lighted. Turn the controller until the house number is selected and press the controller.

Only house numbers stored for the street on the navigation DVD can be entered.

D es

ti n

at io

n e

n tr

y

118

Starting destination guidance with manual destination entry

Select "Start guidance" and press the control- ler. Destination guidance starts immediately.

If you do not want to start destination guidance right away: Select "Add to destination list" and press the controller. The destination is stored in the destination list, refer to page 120.

Map-guided destination selection If you only know the location of the town or street of the destination, then you can input the destination by using a map. You can use the cursor to localize the destination on the map and then adopt it for destination guidance.

1. Select "Navigation" and press the control- ler. "New destination" is selected.

2. Press the controller.

3. Select "Input map" and press the controller.

A section of a map is displayed on the Con- trol Display:

> During destination guidance, around the current destination

> With the destination guidance deacti- vated, around the last destination entered

4. Turn the controller to adjust the scale. To move the map, move the controller in the desired direction. The controller can be moved to the left, right, forwards, backwards and also diago- nally.

5. Press the controller to adopt it for destina- tion guidance or to store it. The selected destination and other menu items are displayed.

N av

ig at

io n

D ri

vi n

g t

ip s

119

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

6. Select the desired menu item:

> "Start route guidance" starts destination guidance.

> "Show current position" places your current position at the center of the map.

> "Show destination position" places the current destination at the center of the map.

> "Return to map" changes back to the "Input map".

> Exit the menu.

7. Press the controller.

The map for destination entry can also be called up in the map display: Select the symbol and press the controller.

Selecting destination using information You can obtain a display of selected destina- tions, e.g. hotels, sights or hospitals, and adopt them for destination guidance.

1. Select "Navigation" and press the control- ler. "New destination" is selected.

2. Press the controller.

3. Select "Information" and press the control- ler.

4. Selecting location:

> "On destination"

> "On location"

> "On a new destination"

5. Press the controller.

6. Make your selection, e.g. "Hotels and res- taurants", and press the controller. Destinations appear on the Control Display, which are sorted alphabetically or accord- ing to distance.

7. Select a destination and press the control- ler.

8. Select a menu item:

> To transfer the address to the destina- tion list and start destination guidance:

D es

ti n

at io

n e

n tr

y

120

Select "Select as destination" and press the controller.

> To establish a telephone connection: Select "Call" and press the controller.

To exit from the menu: Select the arrow and press the controller.

Destination list The last 20 destinations entered into the sys- tem are shown in the destination list. You can call up these destinations and adopt them for destination guidance. If you are planning a longer journey, for exam- ple, you can store all the destinations you wish to drive to in the destination list in advance, refer to Entering a destination manually on page 115.

Select "Navigation" and press the controller.

The destination last entered is listed first in the destination list.

This symbol indicates the current destina- tion.

To show other destinations in the destination list: Turn the controller.

Adopting destination for destination guidance 1. Select the desired destination from the des-

tination list and press the controller.

2. Select "Start guidance" and press the con- troller.

Editing the destination list 1. Select the desired destination from the des-

tination list and press the controller.

2. The selected destination can be edited:

> To store the entry: Select "Add to address book".

> To display information on the destina- tion: Select "Information on destination".

> To delete the entry: Select "Delete entry".

> To delete all entries: Select "Delete list". The destination guidance is switched off.

> To change the entry: Select "Edit". For operation, refer to Entering destination, page 116.

3. Press the controller.

N av

ig at

io n

D ri

vi n

g t

ip s

121

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Address book

Opening address book iDrive concept, refer to page 16.

Select "Address book" and press the controller.

Storing destinations in address book You can store approx. 100 destinations in the address book.

1. Select "Address book" and press the con- troller.

2. Select "New address" and press the con- troller.

3. Select "Enter address" and press the con- troller.

4. Input name and address.

5. Select "Store in address book" and press the controller. The entry is stored in the address book.

You can also store a destination from the desti- nation list in the address book, refer to page 120.

Storing current position The current position can be adopted into the address book.

1. Select "Address book" and press the con- troller.

2. Move the controller backwards so that the second field from the top is highlighted. Turn the controller until "New address" is selected and press the controller.

3. Select "Use current location as address" and press the controller. The name given can be changed. For oper- ation, refer to Entering a destination manu- ally, page 115.

4. Select "Store in address book" and press the controller.

You can also enter your current position into the address book if you have left the area covered by the navigation DVD. In this case, you must enter a name.

Selecting destinations from address book 1. Select "Address book" and press the con-

troller. The stored entries appear on the Control Display.

2. Select the entry and press the controller.

D es

ti n

at io

n e

n tr

y

122

To start destination guidance: Select "Start guidance" and press the control- ler.

Changing destinations from address book 1. Select "Address book" and press the con-

troller.

2. Select the entry and press the controller.

3. Select "Edit address" and press the con- troller.

4. Change entry. For operation, refer to Entering a destina- tion manually, page 115.

Deleting individual destinations from address book 1. Select "Address book" and press the con-

troller.

2. Select the entry and press the controller.

3. Select "Delete address" and press the con- troller.

Deleting all destinations from address book 1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Vehicle settings" and press the controller.

4. Select "Delete data" and press the control- ler.

5. Select "Delete address book" and press the controller.

6. Select "Yes" and press the controller.

Storing home address You can store your current position or the cur- rent destination as the home address in the address book. This entry occupies the second position in the address book.

1. Select "Address book" and press the con- troller.

2. Move the controller backwards so that the second field from the top is highlighted.

N av

ig at

io n

D ri

vi n

g t

ip s

123

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Turn the controller until "Home address" is selected and press the controller.

3. Select "Use current location as address", or "Save current destination" during the desti- nation guidance, and press the controller.

In order to accept the home address as the des- tination:

1. Select "Home address" and press the con- troller.

2. Select "Start guidance" and press the con- troller.

To change the entry:

1. Select "Home address" and press the con- troller.

2. Select "Edit address" and press the con- troller. For operation, refer to Entering a destination manually, page 115.

Route selecting You can influence the calculated route by choosing certain route criteria. You can change the route criteria as often as you like during des- tination entry or during destination guidance.

The route is planned according to fixed rules. The type of road is taken into account, e.g. whether it is a highway or a winding road. The road types are stored on the navigation DVD. As a result, the routes recommended by the navi- gation system may not always be the same ones that you would choose based on personal experience.

Changing route criteria 1. Select "Navigation" and press the control-

ler.

2. Move the controller backwards so that the third field from the top is highlighted. Turn the controller until "Route preference" is selected and press the controller.

The various criteria are listed on the Control Display.

3. Select a route criterion for the route:

> "With highways" Freeways and major traffic arteries are given priority.

> "Avoid highways" Freeways are avoided as far as possible

> "Fast route" The fast route, being a combination of the shortest possible route and the fast- est roads

> "Short route" Short route, irrespective of how fast or slow progress will be

4. Press the controller.

The route criterion is highlighted.

D es

ti n

at io

n e

n tr

y

124

5. If necessary, select an additional route cri- terion and then press the controller:

> "Avoid tollroads" Toll roads are avoided as far as possible.

> "Avoid ferries" Ferries are avoided as far as possible.

To exit from the menu: Select the arrow and press the controller.

The route criteria can also be changed in the arrow or map display: Select the corresponding symbol and press the controller.

Word-matching principle The system's word-matching principle makes it easier for you to enter the names of streets or towns. The system runs ongoing checks, com- paring your destination entries with the data stored on the navigation DVD as the basis for instant response. The benefits for you include:

> Names of specific locations can also vary from the official versions if you are using a spelling that is customary in another coun- try.

Example:

Instead of the German spelling "Mnchen" you can also enter the English spelling "Munich" or the Italian spelling "Monaco".

> When you are entering the names of towns and streets the system will complete them automatically as soon as enough letters are available to ensure unambiguous identifica- tion.

> The system only accepts name entries beginning with letters that are stored on the navigation DVD. The system will not accept non-existent names and addresses.

N av

ig at

io n

D ri

vi n

g t

ip s

125

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Destination guidance

Starting destination guidance iDrive concept, refer to page 16.

1. Select "Navigation" and press the control- ler.

2. Select the destination from the destination list and press the controller or enter a new destination, refer to page 115.

3. Select "Start guidance" and press the con- troller.

After the route has been calculated, destination guidance is indicated by arrows or a map on the Control Display.

The destination guidance can also be started in the arrow or map display: Select the symbol and press the controller.

During destination guidance, you can operate other equipment items at any time via iDrive. You will be notified in time of any necessary change of direction by means of spoken instructions and the display of the direction arrow.

Terminating/continuing destination guidance

In the arrow or map display Select the symbol and press the controller.

In the destination list This symbol indicates the current destina-

tion.

1. Select the current destination and press the controller.

2. Select "Start guidance" and press the con- troller.

D es

ti n

at io

n g

u id

an ce

126

If you did not reach your destination before the end of your last journey, the following question will appear in the display at the start of the next journey: "Continue guidance to destination?".

The destination guidance starts automatically after a short time.

To start destination guidance immediately: Select "Yes" and press the controller.

Route display You have the option of displaying various views of the route during destination guidance.

From another menu, you can switch directly to the screen last displayed, refer

to Convenient call-up of menu items on page 18.<

Displaying arrow view 1. Select "Navigation" and press the control-

ler.

2. Move the controller backwards twice so that the fourth field from the top is high- lighted. Turn the controller until "Arrow dis- play" is selected and press the controller.

The arrow display is shown.

1 Switching voice instructions on/off

2 Selecting route criteria

3 Starting/stopping destination guidance

4 Arrow to destination as the crow flies

5 Distance to the next change of direction

6 Current location

7 Direction of travel

> Outline of an arrow: Destination guidance on the calculated route

> Solid arrow: Arrow points as the crow flies to the cal- culated route whenever the vehicle is not in an area recorded on the navigation DVD, e.g. in a parking garage

The arrows change appearance before a change of direction.

1 Street name for change of direction

2 Distance to change of direction

3 Change of direction

To exit from the menu: Select the arrow and press the controller.

Displaying map view You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map.

1. Select "Navigation" and press the control- ler.

2. Move the controller backwards twice so that the fourth field from the top is high-

N av

ig at

io n

D ri

vi n

g t

ip s

127

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

lighted. Turn the controller until the desired map view is selected:

> "Map facing north"

> "Map direction of travel"

> "Perspective"

3. Press the controller.

1 Switching voice instructions on/off

2 Starting/stopping destination guidance

3 Map-guided destination selection

4 Showing/hiding information last selected, refer to Selecting destination using infor- mation on page 119

5 Changing map view

> "Map facing north"

> "Map direction of travel"

> "Perspective"

6 Changing route criteria

7 Arrow to destination as the crow flies

To exit from the menu: Select the arrow and press the controller.

At scales of less than 300 miles/500 km, you have the option of deciding whether to orient the map to north, toward your current direction of travel, or show the map in perspective. At

scales of 300 miles/500 km or greater, the map always points toward north.

Changing map view

Select the corresponding symbol and press the controller.

The next map view is displayed.

Changing scale Turn the controller to adjust the scale.

Displaying towns/cities and streets along the route You can have the roads and towns along the route displayed during destination guidance.

The distances remaining to be traveled within each section of the route are also displayed, as well as directional arrows.

1. Select "Navigation" and press the control- ler.

2. Move the controller backwards so that the third field from the top is highlighted. Turn the controller until "Route list" is selected and press the controller.

To exit from the menu: Select the arrow and press the controller.

Destination guidance through voice instructions

Switching voice instructions on/off Voice instructions can be switched on or off during the destination guidance in the arrow or

D es

ti n

at io

n g

u id

an ce

128

map view: Select the symbol and press the controller.

To switch the voice instructions on/off at any time:

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Display settings" and press the controller.

4. Select "Languages" and press the control- ler.

5. Select "Navigation voice instructions on" and press the controller.

The voice instructions are switched on.

Repeat voice instructions and cancel With the programmable buttons on the steering wheel, you can also execute the following func- tions, refer to page 45:

> Repeat the voice instruction: Press the button.

> Switch voice instructions on/off: Hold the button down.

Adjusting volume of voice instructions The volume can be adjusted only while a voice instruction is being issued.

1. Repeat the last voice instruction, if neces- sary.

2. Turn the button during the voice instruction to select the desired volume.

This volume is independent of the volume of the audio sources.

The setting is stored for the remote control cur- rently in use.

Bypassing route sections During destination guidance, you can revise the navigation system's route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route.

1. Select "Navigation" and press the control- ler.

2. Move the controller backwards so that the third field from the top is highlighted. Turn

N av

ig at

io n

D ri

vi n

g t

ip s

129

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

the controller until "New route" is selected and press the controller.

3. Turn the controller to enter the desired number and press the controller.

The route is recalculated.

To exit from the menu without changing the route: Select the arrow and press the controller.

Displaying current position You can have your current position displayed even when the destination guidance is switched off.

1. Select "Navigation" and press the control- ler.

2. Move the controller backwards twice so that the fourth field from the top is high- lighted. Turn the controller until "Current position" is selected and press the control- ler.

The current position of your BMW is displayed.

If the navigation system is unable to identify a town or city, your current map coordinates will appear.

To exit from the menu: Select the arrow and press the controller.

You can also have the current position dis- played on a map, refer to page 126.

W h

at to

d o

if

130

What to do if

What to do if

> a navigation DVD is inserted, but an instruc- tion to insert the DVD appears on the Con- trol Display? The navigation DVD may not be the correct DVD for the navigation system. This infor- mation is indicated on the DVD label.

> you request the current position of your vehicle, but do not receive a precise dis- play? The system is unable to receive enough GPS signals at your current position owing to obstructions, your current position is not yet available on your navigation DVD, or the system is in the process of calculating your current position. As a rule, reception is guaranteed when you are in the open.

> the destination guidance does not accept a destination? The data of the destination is not stored on the navigation DVD that is loaded. Choose a destination as close as possible to the orig- inal one.

> the destination guidance does not accept an address without the street name? On the navigation DVD, no downtown area can be determined for the city or town entered. Enter any street, or a destination such as the railway station in the selected town, and then start the destination guid- ance.

> you want to enter a destination for the des- tination guidance, but it is not possible to select the letters for your desired entry? The data of the destination is not stored on the navigation DVD that is loaded. In this case, the system will not offer you any let- ters to choose from. Choose a destination as close as possible to the original one.

> the system stops furnishing directions on which way to turn as you approach intersec- tions? You are driving in an area that has not yet been completely recorded on the naviga-

tion DVD. Instead of an arrow indicating a turn, you will see an arrow which indicates the general direction of your planned route. Or you have left the recommended route and the system requires a few seconds to calculate a new recommended route.

> the navigation system does not react to entries? If the battery was disconnected, it takes about 10 minutes before the system is once again operational.

N av

ig at

io n

D ri

vi n

g t

ip s

131

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns E

n te

rt a

in m

e n

t M

o b

il it

y

Entertainment Operation of the radio and CD equipment as

well as their tone settings are described in this chapter.

O n

/o ff

a n

d s

et ti

n g

s

134

On/off and settings

The following audio sources have shared con- trols and setting options:

> Radio Professional

> CD player

> CD changer*

Controls The audio sources can be operated using:

> Buttons near the CD player

> iDrive

> Buttonson the steering wheel, refer to page 10

Buttons near the CD player

1 Sound output for entertainment on/off, vol- ume

> Press: switch on/off. When you switch on, the last set radio station or CD track is played.

> Turn: adjust volume.

2 Drive for audio CDs

3 Eject CD

4 Station scan/track search

> Change radio station.

> Select track for CD player and CD changer.

5 Drive for navigation DVD

Operation via iDrive iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller backwards to call up "Entertainment".

You have the following choices:

> "FM" and "AM": radio reception

> "WB": Weather Band station

> "SAT": satellite radio

> "CD": CD player or CD changer

> "Audio Aux": external audio device

> "Set": depending on the audio source, other adjustments can be made, e.g. with the radio: update station with strongest reception, store station, tone control, sam- ple stations.

From another menu, you can switch directly to the screen last displayed, refer

to Convenient call-up of menu items on page 18.<

Switching on/off In order to switch the entertainment sound out- put on and off: Press button 1 on the CD player.

This symbol on the Control Display indi- cates that sound output is switched off.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

135

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

Adjusting volume Turn knob 1 on the CD player until the desired volume is obtained.

You can also adjust the volume with buttons on the steering wheel, refer to page 10.

The setting is stored for the remote control cur- rently in use.

Tone control You can alter various tone settings, e.g. treble and bass or the speed-dependent volume increase. The tone settings are applied to all audio sources.

The settings are stored for the remote control currently in use.

Changing tone settings 1. Press the button.

This opens the start menu.

2. Press the controller to open the menu.

3. Select "Entertainment settings" and press the controller.

4. Select "Audio" and press the controller.

The tone settings can also be selected if you have called up "Entertainment" in the start menu: Select "Set" and then "Tone", and press the controller.

Treble and bass 1. Select "Treble / Bass" and press the con-

troller.

2. Move the controller to the left or right to select "Treble" or "Bass".

3. Turn the controller until the desired setting is selected.

Balance and fader You can adjust the volume distribution in the same manner as "Treble / Bass".

> "Balance": left/right volume distribution

> "Fader": front/rear volume distribution

Speed-dependent volume control The speed-dependent volume control auto- matically increases the volume with increasing driving speed. You can set various stages for the increase in volume.

O n

/o ff

a n

d s

et ti

n g

s

136

1. Select "Speed volume" and press the con- troller.

2. Turn the controller. The adjustment is applied; the field can be changed.

Professional LOGIC7 HiFi System* You can select a spatial sound effect that improves the spatial acoustics in all frequency ranges.

1. Select "LOGIC7" and press the controller.

2. Select "Concert hall" or "Theater".

3. Press the controller. LOGIC7 spatial sound is switched on.

To switch off the spatial sound effect: Select "Off" and press the controller.

LOGIC7 and the LOGIC7 logo are registered trade marks of Lexicon, Inc., a company of the Harman International Group.

Equalizer* You can set individual sound frequency ranges.

1. Select "Equalizer" and press the controller.

2. Move the controller to the left or right to select the desired frequency range.

3. Turn the controller until the desired setting is selected.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

137

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

Resetting tone settings You can reset all tone settings to the default setting.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Entertainment settings" and press the controller.

4. Select "Audio" and press the controller.

5. Select "Reset" and press the controller.

R ad

io

138

Radio

Your radio provides reception of the FM and AM wavebands.

Listening to the radio

Press the button if the sound output is switched off.

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller backwards to call up "Entertainment".

3. Select "FM" or "AM".

4. Press the controller.

Stations are shown on the Control Display on the basis of various selection criteria, e.g. "Pre- sets".

If "Autostore" does not show a station in the AM waveband or if the displayed stations are no longer receivable, update the stations with the strongest received signal, refer to page 139.

Changing stations

Turn the controller.

In addition to the stations currently displayed, you can have stations with another selection criterion displayed.

You can choose from the following selection criteria:

> "All stations": Stations that can currently be received on the "FM" waveband.

> "Autostore": The stations with the strongest received signals in the "AM" waveband.

> "Presets": Stations you have previously stored, refer to page 140.

Changing selection criteria 1. Move the controller forward to change the

field.

2. Choose a selection criterion and press the controller.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

139

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

Buttons on the CD player Press the button for the corre-

sponding direction. The system switches to the next displayed sta- tion. You can also change stations with buttons on the steering wheel, refer to page 10.

Sampling stations, scan The stations on the current waveband are auto- matically sampled in succession.

1. Select "FM" or "AM" and press the control- ler. "Set" is selected.

2. Press the controller. Other menu items are displayed.

3. Select "Scan" and press the controller.

Scan starts.

To stop the scan:

1. Press the controller.

2. Select "Scan" and press the controller.

This cancels the scan search, and the radio remains on the current station.

Buttons on the CD player To start scan, hold down the corre-

sponding direction button.

To stop scanning, press the button again.

Selecting frequency manually With "Manual" you can select stations that are received in addition to those displayed.

1. Select "FM" or "AM" and press the control- ler.

2. Move the controller forward to change the field.

3. Select "Manual" and press the controller.

4. Turn the controller to set a certain fre- quency.

Updating stations with best reception If on a longer journey you move out of the reception range of the stations originally received, you can update the list of stations received with the strongest signals in the AM waveband.

1. Select "AM" and press the controller.

2. Move the controller forward to change the field.

3. Select "Autostore" and press the controller. "Set" is selected.

4. Press the controller. Other menu items are displayed.

R ad

io

140

5. Select "Autostore" and press the controller.

The display of the stations with the strongest reception is updated. The frequencies of the stations are displayed.

Storing stations 1. Select "FM" or "AM" and press the control-

ler.

2. If necessary, move the controller forwards so that the second field from the top is high- lighted. Turn the controller until the desired selection criterion is chosen and press the controller.

3. Select the desired frequency or station. "Set" is selected.

4. Press the controller. Other menu items are displayed.

5. Select "Store" and press the controller.

"Presets" is displayed.

6. Turn the controller until the desired mem- ory position is selected. The number of the memory position appears beside the name or frequency of the station.

7. Press the controller. The station is stored.

The channels of the last selection criterion are displayed once again after a short time.

The stations are stored for the remote control currently in use.

Changing a memory position 1. Select "Presets" and press the controller.

2. Select the desired station. "Set" is selected.

3. Press the controller. Other menu items are displayed.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

141

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

4. Select "Store" and press the controller.

5. Turn the controller until the desired mem- ory position is selected. The number of the memory position appears beside the name or frequency of the station.

6. Press the controller. The station is stored.

RDS Radio Data System RDS transmits additional information in the FM frequency range. RDS stations have the follow- ing properties:

> In the case of broadcasting networks that transmit over a number of frequencies, there is an automatic switch to the fre- quency with the best reception quality.

> If the reception conditions are good, the station names are shown on the Control Display. Where reception is poor or in the event of interference, it may take some time before the station names will appear in the display.

Weather Band* Weather Radio is a service of the National Oce- anic and Atmospheric Administration, NOAA, of the U.S. Department of Commerce. Weather messages are repeated every four to six min- utes and are routinely revised every one to three hours, or more frequently if needed. Most of the stations operate 24 hours daily. During severe weather, National Weather Service forecasters can interrupt the routine weather broadcasts and substitute special warning messages. If you have a question concerning NOAA Weather

Radio, please contact your nearest National Weather Service Office, or write to National Weather Service, Attn: W/OM11, National Oce- anic and Atmospheric Administration, 1325 East-West Highway Silver Spring, MD 20910.

Selecting Weather Band 1. Select "WB" and press the controller.

2. Select Weather Band station.

The Weather Band station may be unavailable in some regions.

Satellite radio* You can receive over 100 different channels with high sound quality.

The channels are offered to you in predefined packages. To receive the channels of your choice, you must have this package enabled.

You may experience signal drops and muting events related to this new tech-

nology.<

Enabling or disabling channels iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller backwards to call up "Entertainment".

R ad

io

142

3. Select "SAT".

4. Press the controller.

The channels are displayed. These channels are enabled.

Enabling 1. Select a channel that has not yet been

enabled and press the controller. A telephone number and the electronic serial number, ESN, are displayed.

The electronic serial number is required to enable or disable.<

2. To enable the channel: Dial the phone number.

Disabling 1. Select an enabled channel and press the

controller.

2. Select "ESN" and press the controller. The electronic serial number, ESN, is dis- played.

The electronic serial number is required to disable.<

3. To disable the channel: Dial the phone number.

Selecting and storing a channel 1. Select "SAT" and press the controller.

Channels are shown on the Control Display sorted on the basis of selection criteria.

2. Select a menu item:

> "Presets": Up to twelve channels you have stored previously.

> "All channels": All channels are displayed.

> "Categories": All channels, sorted by categories, e.g. news, jazz.

3. Press the controller.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

143

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

4. If "Categories" has been selected: Select the desired category and press the controller.

The channels of this category are displayed.

5. Select a channel marked with this sym- bol.

6. Press the controller. Other menu items are displayed.

7. Select "Play" and press the controller.

Additional information The name of the channel and additional infor- mation on the current track are displayed, e.g. the name of the artist.

1 Artist

2 Track

Storing a channel 1. Select the desired channel.

2. Press the controller. Other menu items are displayed.

3. Select "Store" and press the controller.

"Presets" is displayed.

4. Turn the controller to select a memory loca- tion and press the controller.

The channel is stored. The channels of the last selection criterion are displayed once again after a short time.

R ad

io

144

Changing channels with buttons on CD player

Press the button for the corresponding direction. The system switches to the next enabled chan- nel.

Notes When there is a signal blockage or the transmis- sion is suspended momentarily for more than 4 seconds, a message appears on the Control Display.

Service may be interrupted or unavailable for specific reasons such as environmen-

tal or topographic conditions and others that satellite radio cannot directly control. Signal may not be available under tunnels, in parking garages, next to tall buildings, nearby trees with dense foliage, nearby mountains or other possible strong sources of radio interfer- ence. Service should resume normally after the source of signal unavailability has been cleared.<

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

145

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

CD player and CD changer

Listening to CDs

Starting the CD player

When equipped with two drives: The upper drive is for audio CDs.

Insert the CD into the drive with the labeled side up. Playback starts automatically if the sound out- put is on.

To start playback when there is already a CD in the drive:

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller backwards to call up "Entertainment".

3. Select "CD" and press the controller.

4. On cars with a CD changer, select "CD" and press the controller to start the CD player.

Playback starts automatically if the sound out- put is switched on.

Starting the CD changer 1. Fill the CD magazine and insert, refer to

page 147.

2. Press the button. This opens the start menu.

3. Move the controller backwards to call up "Entertainment".

4. Select "CD" and press the controller.

5. Select the desired CD and press the con- troller.

At the end of the last track, the next CD is selected and played.

If new CDs have been placed in the CD maga- zine, playback starts with the lowest CD, e.g. CD 1, track 1.

The CD magazine's load status is indicated on the Control Display.

*

C D

p la

ye r a

n d

C D

c h

an g

er

146

Selecting a track

Buttons on the CD player Press the button for the appropriate direction as often as necessary until the desired track on the current CD is reached. The CD starts to play at the start of the track. The track is displayed on the Control Display.

You can also change the track with buttons on the steering wheel, refer to page 10.

Via iDrive Turn the controller to select a track.

Sampling tracks, Scan All tracks on the current CD are automatically sampled once in succession.

1. Select "Set" and press the controller. Other menu items are displayed.

2. Select "Scan" and press the controller.

To stop the scan:

1. Press the controller.

2. Select "Scan" and press the controller.

Scan is interrupted and the selected track is retained.

Repeating tracks 1. Select "Set" and press the controller.

Other menu items are displayed.

2. Select "Repeat" and press the controller.

The current track on the CD is repeated.

Stop repeating:

1. Press the controller again.

2. Select "Repeat" and press the controller.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

147

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

Random play sequence The tracks on the current CD are played once each in random order.

1. Select "Set" and press the controller. Other menu items are displayed.

2. Select "Random" and press the controller.

Stop random function:

1. Press the controller.

2. Select "Random" and press the controller.

Fast forward/reverse Buttons on the CD player:

Press and hold the button for the corresponding direction. The tracks can be heard, but reproduction is distorted.

CD magazine

The BMW CD changer for six CDs is behind the left side panel in the luggage compartment.

Removing the CD magazine To insert or remove CDs from the CD magazine, you must first remove it from the CD changer:

1. Push the cover to one side, arrow 1.

2. Press the button, arrow 2. The CD magazine is ejected.

Inserting/removing CDs from the CD magazine

When loading CDs into or removing them from the CD magazine, hold them at the edge and do not touch the reflective signal-sensing area.

Inserting CDs: Insert the CD in its slot with the label side on top.

Removing CDs: Pull out the desired drawer, refer to arrow, and remove the corresponding CD.

C D

p la

ye r a

n d

C D

c h

an g

er

148

Inserting the CD magazine

Insert the CD magazine all the way in the direc- tion of arrow 1 and close the cover, arrow 2.

The CD changer automatically reads in the loaded CDs and is then ready for operation.

Notes BMW CD/DVD players and changers are officially designated Class 1 laser prod-

ucts. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs/DVDs with labels applied as these can become detached during playback due to heat build-up and can cause irreparable damage to the device. Only use round CDs/DVDs with a standard diameter of 12 cm and do not play CDs/DVDs with an adapter, e.g. Single-CDs, otherwise the CDs or the adapter can jam and will no longer eject. Do not use a combined CD/DVD, e.g. DVDPlus, as otherwise the CD/DVD can jam and will no longer eject.<

General malfunctions BMW CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be.

If a CD/DVD cannot be played, first check if it has been inserted correctly.

Humidity High levels of humidity can lead to condensa- tion on the CD/DVD or the laser's scan lens and temporarily prevent playback.

Malfunctions with individual CDs/DVDs If malfunctions only occur with individual CDs/ DVDs, one of the following factors may be the cause.

Self-recorded CDs/DVDs Possible reasons for malfunctions with self- recorded CDs/DVDs are, e.g., inconsistent data-creation or recording processes, or poor quality or high age of the CD/DVD blank.

Only label CDs/DVDs on the top, with a pen designed for this purpose.

Damaged CDs/DVDs Avoid leaving fingerprints, as well as dust, scratches or moisture on the CDs/DVDs. Keep CDs/DVDs in protective sleeves or cases. Do not subject CDs/DVDs to temperatures over 506, high levels of humidity or direct sunlight.

CDs/DVDs with copy protection CDs/DVDs are often copy-protected by the manufacturer. This can mean that some CDs/ DVDs cannot be played or can only be played to a limited extent.

N av

ig at

io n

E n

te rt

a in

m e

n t

D ri

vi n

g t

ip s

149

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls C

om m

un ic

at io

ns M

o b

il it

y

External audio device

You can connect an external audio device, for instance an MP3 player, and play audio tracks over the car's loudspeaker system. You can adjust the tone using iDrive.

Connecting Lift up the center armrest.

1 Power supply for your external audio device: Socket with removable cap

2 Connection for audio playback: 3.5 mm phono connector

To play audio tracks through the car's loud- speaker system, connect the headset or line- out port of the external device to connection 2.

Starting audio playback The audio device must be switched on.

iDrive concept, refer to page 16.

1. Press the button.

This opens the start menu.

2. Move the controller backwards to call up "Entertainment".

3. Select "Audio Aux" and press the control- ler.

4. Adjust volume and tone, if necessary.

Communications This chapter describes how to use BMW Assist

and TeleService.

T el

ep h

o n

in g

152

Telephoning

Safety notes

For your own safety A car phone makes life more convenient in many ways, and can even save lives in an emer- gency. While you should consult your portable phone's separate Owner's Manual for a detailed description of safety precautions and informa- tion, we request that you direct your particular attention to the following:

Adjustments Only make entries when the traffic situa- tion allows you to do so. Do not hold the

portable phone in your hand while you are driv- ing; use the hands-free system instead. If you do not observe this precaution, your being dis- tracted can endanger vehicle occupants and other road users.

BMW discourages the use of portable phones or other mobile communications devices inside the vehicle without a direct connection to an outside antenna. Otherwise, interferences between vehicle electronics systems and the mobile communication device cannot be ruled out. Moreover, there is no guarantee that the radiation generated when such devices are transmitting will be dissipated out of the vehi- cle's interior.<

Care instructions You can find what you need to know about car- ing for your portable phone in the separate Car- ing for your vehicle brochure and in the portable phone Owner's Manual.

Operating options You can operate the portable phone* using:

> The steering wheel, refer to page 10

> iDrive, refer to page 153

> Voice commands, refer to page 156

You can get information about activating the portable phone in the separate Owner's Manual for the Full Preparation Package Cellphone.

Making calls with the car phone: BMW Assist calls You can use the car phone via the hands-free system for BMW Assist calls.

When the status information "BMW Assist" or "BMW Service" is displayed in "Communica- tion", only BMW Assist calls are possible.

It may not be possible to establish a telephone connection using the portable phone while a connection is being established to BMW Assist or while a call to BMW Assist is already in progress. If this happens, you must unpair the portable phone and the vehicle if you wish to place a call with the portable phone.

Hands-free system The hands-free microphone is located on the headliner.

The hands-free system is activated whenever you establish or receive a call using:

> The buttons on the steering wheel

> iDrive

> Voice commands

153

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

Adjusting volume

Turn the knob during a call to select the desired volume.

This volume for the hands-free system is main- tained, even if the other audio sources are set to minimum volume.

The setting is stored for the remote control cur- rently in use.

Operation via iDrive Once the portable phone is connected to the vehicle via Bluetooth, the following functions can be used via iDrive:

> Dialing phone numbers

> Phone book

> Top 8

> Redialing

> Displaying accepted calls

> Displaying missed calls

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller forwards to call up "Communication".

Receiving calls If you have the phone number of the caller stored in the phone book and the phone num- ber is transmitted, the name of the entry is dis- played.

Accepting a call

Select "Accept" and press the controller.

Rejecting a call Select "Reject" and press the controller. The caller is diverted to your mailbox if it has been activated.

Calling

Dialing phone numbers 1. Select "Phone" and press the controller.

2. Select "Dial" and press the controller.

3. To enter the phone number: select digits or letters individually and press the controller. Always enter the complete phone number consisting of national dialing code, area code, and phone number. The letters correspond to the numbers on the keypad of the portable phone.

To delete an incorrect number or letter: Move the controller towards the right to select , and press the controller.

T el

ep h

o n

in g

154

4. Select "Dial number" and press the control- ler.

Ending a call 1. If necessary, select the telephone number.

2. Press the controller. Additional menu items are displayed when the hands-free system is switched on.

3. Select "End call" and press the controller.

Phone book Once the portable phone is connected to the vehicle via Bluetooth, the phone book is trans- mitted from the portable phone to the vehicle. Loading the phone book can take several min- utes.

Dialing from phone book 1. Select "Phone" and press the controller.

2. Select "A - Z" and press the controller: The entries in the phone book of the porta- ble phone are displayed on the Control Dis- play; they are sorted alphabetically.

To run a targeted search for an entry, select the first letter of the entry and press the controller. The first entry that starts with this letter is displayed.

3. Select the desired entry.

4. Press the controller. Other menu items are displayed.

5. Select "Call" and press the controller. The system dials the number.

If different phone numbers are stored in the portable phone under one name, e.g. office and home, the name is shown once for each phone number.

Adding digits to phone numbers You can add other digits to a phone number stored in the phone book, e.g. to call a specific extension:

155

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

1. Select "Phone" and press the controller.

2. Select "A - Z" and press the controller.

3. Select the desired entry.

4. Press the controller. Other menu items are displayed.

5. Select "Add digits" and press the controller.

6. To add to the phone number: select digits individually and press the controller.

7. Select "Dial number" and press the control- ler.

Lists Your phone can store phone numbers you have dialed and incoming calls in lists. If the caller is entered in the phone book, the name of the entry is displayed instead of the phone number. You can select the desired subscriber from the list and establish the connection.

Four lists are available:

> "Top 8" The eight numbers called most frequently via the "A - Z" list are automatically stored in the Top 8 list. The number called most often appears at the top of the list.

> "Redial" The last eight phone numbers you have dialed are automatically stored. The last number dialed is at the top of the list.

> "Received calls" The phone numbers of the last eight calls accepted while the portable phone was connected to the vehicle via Bluetooth are stored. This requires the telephone number of the caller to have been sent.

> "Missed calls" The phone numbers of the last eight calls missed while the portable phone was con- nected to the vehicle via Bluetooth are stored. This requires the telephone number of the caller to have been sent.

Dialing from a list To select an entry and establish a connection:

1. Select "Phone" and press the controller.

2. Select the list:

> "Top 8"

> "Redial"

> "Received calls"

> "Missed calls"

3. Press the controller.

4. Select the desired entry.

5. Press the controller. Other menu items are displayed.

6. Select "Call" and press the controller. The system dials the number.

Deleting an individual entry 1. Select the desired entry from the list.

2. Press the controller. Other menu items are displayed.

T el

ep h

o n

in g

156

3. Select "Delete" and press the controller. The entry is deleted.

Deleting the entire list 1. Select an entry from the list.

2. Press the controller. Other menu items are displayed.

3. Select "Delete all numbers" and press the controller. The list is deleted.

Touch tone dialing Touch tone numbers are required for access to network services or for controlling devices, e.g. for remote querying on an answering machine.

This function can only be used during an exist- ing connection.

1. Establish connection.

2. Press the controller. Other menu items are displayed.

3. Select "Keypad" and press the controller.

4. Select the desired digits or letters* and press the controller. The letters correspond to the numbers on the keypad of your portable phone. Each digit is sent immediately.

Operation by voice*

The concept You can operate your portable phone without having to remove your hands from the steering wheel. The system operates on the basis of voice commands that you will learn easily after using them a few times. In addition, you are also supported by instructions or questions.

Symbols used

Saying commands With the ignition switched on:

1. Press the button on the steering wheel. A sound signal indicates operating readi- ness.

2. Say voice commands.

To have the system list the voice com- mands possible in each case:

{...} Indicates voice commands.

{{...}} Indicates system announcements.

{Options}.

157

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

Canceling operation by voice Press button on steering wheel or

In dialogs where text is spoken, e.g. a name rather than a command, canceling is only possi- ble using the button. The dialog is automati- cally interrupted when an incoming call is received.

Voice commands In addition to the commands described in this Owner's Manual, alternative commands are often possible for the same functions, e.g.:

The system recognizes digits from zero to nine.

You can say each digit individually or group them into a sequence of three to five digits to accelerate the input.

{Cancel}.

{Dial name} or {Name}.

T el

ep h

o n

in g

158

Example: Dialing phone numbers Start the dialog:

Press the button on the steering wheel.

Adjusting volume You can adjust the volume for the instructions from the system:

Turn the button during an instruction to select the desired volume.

This volume for the instructions is maintained, even if the other audio sources are set to mini- mum volume.

The setting is stored for the remote control cur- rently in use.

Calling

Dialing phone numbers

Correcting phone numbers After the last spoken sequence of digits has been repeated by the system, you can delete this sequence of digits.

The command {Correct number} can be repeated as often as you like.

Deleting input {Delete} is used to delete all the digits entered so far.

Voice phone book Operating by voice command requires a per- sonal voice phone book.

The entries must be made by speaking them out loud and they are independent from your portable phone's memory. This means that it is not possible to use voice commands to call phone numbers stored in the portable phone or to store new numbers there.

Voice command Response

{Dial number} {{Please say the number}}

e.g. {123 456 7890} {{123 456 7890. Continue?}}

{Dial} {{Dialing number}}

1. {Dial number}. The dialog for establishing a telephone connection is opened.

2. Say the phone number. For telephone calls abroad, say {Plus} and then the country code.

3. {Dial}. The connection to the desired sub- scriber is established.

{Correct number}. The digits are deleted.

159

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

Storing an entry An entry always consists of a name and phone number.

Selecting an entry The connection to the phone number of the selected entry is established.

Having entries read aloud and selecting You can have all the entries of your voice phone book read aloud in the order of input and select a certain entry to establish a connection:

Redialing The {Redial} command calls up "Redial".

Deleting an entry You can delete any entry from the voice phone book.

Deleting all entries {Delete phone book} deletes all entries in the phone book.

Notes The voice commands in English were available as of this printing. Other lan-

guages are currently in preparation. To operate the portable phone via the voice command sys- tem, refer to page 22.<

Important for voice commands For voice commands, bear in mind the follow- ing:

> Issue the commands smoothly and at nor- mal volume, avoiding excessive emphasis and pauses.

> Keep the doors, windows and glass sunroof closed to prevent interference from ambi- ent noise.

> Avoid other sources of noise in the vehicle while speaking, and ask other vehicle occu- pants to refrain from talking while you are using the system.

1. {Save name}. The dialog for storing a name is opened.

2. Say the name and repeat it upon request. The spoken length of the names in the phone book must not exceed approx. 2 seconds.

3. Say the phone number when prompted.

4. To store the phone number: {Save}.

1. {Dial name}. The dialog for selecting an entry is opened.

2. Say the name when prompted.

3. Confirm the prompt with {Yes}.

1. {Read phone book}. The dialog for having the phone book read is opened.

2. {Dial number} when the desired entry is read aloud.

1. {Delete name}. The dialog for deleting an entry is opened.

2. Say the name when prompted.

3. Confirm the prompt with {Yes}.

1. {Delete phone book}. The dialog for deleting phone book is opened.

2. Confirm the prompt with {Yes}.

3. Confirm the repeated prompt with {Yes}.

T el

eS er

vi ce

, B M

W A

ss is

t

160

TeleService , BMW Assist

TeleService TeleService supports you when communicat- ing with a BMW center. The built-in car phone can be used to transmit data regarding the ser- vice status of your vehicle or regarding legally mandated inspections directly to your BMW center. This is the same data that is also stored for CBS Condition Based Service in the master key. Your BMW center can then contact you, and you can make an appointment that suits you while you are still on the road. Your advan- tage here is that your BMW center can prepare in advance for the required maintenance work. The TeleService functions are country-specific: depending on the country in which you are driv- ing, data about your vehicle's service status or regarding legally required inspections are transmitted to your BMW center either auto- matically before a service due date or when you place a call to the BMW center. Your BMW cen- ter will be glad to provide more detailed infor- mation.

BMW Assist BMW Assist provides you with other services in addition to TeleService. For example, the posi- tion data of your vehicle can be transferred to the BMW Assist response center if an emer- gency call* has been initiated.

Many functions of BMW Assist depend on the individually agreed contract. Data transmission, e.g. of the CBS Condition Based Service, differs from country to country.

The subscriber agreement must be completed successfully before using the BMW Assist ser- vices.

You can also utilize BMW Assist services via the Internet. The service package is continually expanded.

Requirements You can use TeleService or BMW Assist when the following requirements are met:

> The installed car phone is logged on to a portable telephone network. This network must be capable of transmitting the ser- vices.

> To transmit position data, the vehicle must be able to determine the current position. This can be displayed on the Control Dis- play.

> In order to enable and update TeleService or BMW Assist, a GPS signal must be present.

> For BMW Assist: you must have applied for BMW Assist at your BMW center or BMW customer service.

Enabling TeleService or BMW Assist For you to be able to use the services of TeleService or BMW Assist, these must be enabled.

Requirements > Make sure that the vehicle can determine its

current location. As a rule, this is possible when you are in the open.

> Leave radio readiness switched on while connecting to the system.

Enabling iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Communication settings" and press the controller.

* *

161

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

4. Select "BMW Service settings" and press the controller.

5. Select "Service Status" and press the con- troller.

6. Select "Enable services" and press the con- troller. TeleService and, if applicable, BMW Assist are enabled; data exchange with the service center starts.

Enabling takes a few minutes. The status is dis- played on the Control Display. If you open another menu, the enabling process continues to run in the background.

Services offered The following special features apply for the ser- vices of TeleService and BMW Assist:

> The services offered are country-specific.

> Voice contact is established or data are transferred, depending on the equipment and the country. In some countries, it is possible to do both.

> The data transferred can be the vehicle data, your current position or the data of the CBS Condition Based Service.

Automatic service notification* The data on the service status of your vehicle or on legally mandated inspections is transmitted automatically directly to your BMW center prior to the due date. You can check when the BMW center was notified.

iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "Service requirements" and press the controller.

5. Select "Service notification" and press the controller.

T el

eS er

vi ce

, B M

W A

ss is

t

162

Roadside Assistance You can call the Roadside Assistance* of the BMW Group should you require help in the event of a breakdown.

iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Move the controller forwards to select "Communication".

3. Select "BMW Assist" and press the control- ler.

4. Select "BMW Service" and press the con- troller.

5. Select "Roadside Assistance" and press the controller.

If the current position can be determined, the current vehicle location is displayed.

6. Select "Start service" and press the con- troller.

Contact to Roadside Assistance will be estab- lished.

To adjust the license plate, please contact your BMW center.

Setting up contact to your BMW center or BMW Customer Relations You can contact your BMW center, e.g. to arrange a service appointment.

For information related to your vehicle, call the BMW Customer Relations.

A prerequisite for this is that your portable phone is connected to the vehicle.

iDrive concept, refer to page 16.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "BMW Service" and press the con- troller.

5. Select the desired BMW center:

> "Service Request"

> "Customer Relations"

6. Press the controller.

7. Select "Start service" and press the con- troller.

Contact to the desired BMW center will be established.

Adapting TeleService or BMW Assist

Displaying and updating services If the services offered by TeleService or BMW Assist change, you will be notified. In this case you should update the service functions.

1. Open the start menu.

2. Press the controller to open the menu.

163

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

3. Select "Communication settings" and press the controller.

4. Select "BMW Service settings" and press the controller.

5. Select "Service Status" and press the con- troller.

The current services available from TeleService or BMW Assist are displayed.

6. If applicable, select "Options" and press the controller.

7. Select "Update services" and press the controller.

Terminating services If you terminate the services, your vehicle will not be equipped to contact the BMW Assist call center.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Communication settings" and press the controller.

4. Select "BMW Service settings" and press the controller.

5. Select "Service Status" and press the con- troller.

6. Select "Options" and press the controller.

7. Select "Terminate services" and press the controller.

The use of TeleService or BMW Assist is blocked. To cancel the service block, the sys- tem must be reactivated, refer to page 160. Your contractual agreement is not affected by this.

The automatic service notification can be dis- abled separately. Please contact your BMW center for this purpose.

Enable TeleService and, if applicable, BMW Assist once again to log on again.

Displaying vehicle data When TeleService or BMW Assist is activated, the license plate and the vehicle identification number of your vehicle can be displayed.

1. Open the start menu.

2. Press the controller to open the menu.

3. Select "Communication settings" and press the controller.

4. Select "BMW Service settings" and press the controller.

5. Select "Profile" and press the controller.

To adjust the license plate, please contact your BMW center.

BMW Contact* You can establish a voice connection to the fol- lowing services without enabling BMW Assist as long as your portable phone is connected to the vehicle:

> Roadside Assistance* of the BMW Group if you need help in the event of a breakdown

> BMW Service if you wish to schedule a ser- vice appointment, for example

> BMW Customer Relations for information related to your vehicle

iDrive concept, refer to page 16.

T el

eS er

vi ce

, B M

W A

ss is

t

164

1. Press the button. This opens the start menu.

2. Move the controller forwards to select "Communication".

3. Select "BMW Contact" and press the con- troller.

4. Select "BMW Contact Numbers" and press the controller.

5. Select one of the following menu items and press the controller:

> "Roadside Assistance"

> "Customer Relations"

> "Service Request"

6. Select "Call" and press the controller.

Contact will be established.

165

E n

te rt

a in

m e

n t

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n M

o b

il it

y

Mobility This section helps you maintain your car's

mobility by supplying important information on vital topics including fuels and lubricants,

wheels and tires, service, maintenance and breakdown assistance.

R ef

u el

in g

168

Refueling

Always switch off the engine before refu- eling. If you do not, fuel cannot be filled

into the tank and a message will appear on the Control Display.<

Always observe all applicable precautions and regulations when handling fuels.

Never carry spare fuel containers in your vehi- cle. Whether empty or full, these containers can leak, cause an explosion, or lead to fire in the event of a collision.<

Gas cap

Opening

1. Open fuel filler door. To do so, lightly press the rear edge.

2. Turn the gas cap counterclockwise.

3. Place the gas cap in the bracket attached to the fuel filler door.

Closing Fit the cap and turn it clockwise until you clearly hear a click.

Close the gas cap carefully after refueling until a click is heard. While closing, be

sure not to squeeze the strap which is fastened to the cap. A loose or missing cap will activate an indicator lamp and the message Check Gas Cap* on the Control Display.<

Manually releasing the fuel filler door In the event of an electrical malfunction, you can release the fuel filler door manually:

1. Remove the cover from the side panel of the luggage compartment.

2. Pull the knob with the fuel pump symbol. The fuel filler door is released.

Observe the following when refueling When handling fuels always observe any safety guidelines posted at the service

station.<

When refueling, insert the filler nozzle com- pletely into the filler pipe. Lifting the filler nozzle during refueling leads to

> premature pump shutoff

> a reduced efficiency of the fuel-vapor recovery system.

The fuel tank is full when the filler nozzle clicks off the first time.

Fuel tank capacity Approx. 15.9 gallons/60 liters, including the reserve capacity of 2.1 gallons/8 liters.

Refuel as soon as possible once your cruising range falls below 30 miles/

50 km, as otherwise engine functions are not ensured and damage can occur.<

Fuel specifications The engine uses lead-free gasoline only.

M o

b il

it y

169

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Required fuel

Premium Unleaded Gasoline The minimum octane rating is 91. If you use gasoline with this minimum octane rating, the engine may produce knocking sounds when starting at high outside tempera- tures. This has no affect on the engine life.

Minimum octane rating corresponds to the Anti Knock Index AKI and is determined according to the so-called (R+M)/2 method.

Do not fill the tank with leaded fuel, as this would cause permanent damage to the

catalytic converter.<

Use high-quality brands Field experience has indicated significant dif- ferences in fuel quality: volatility, composition, additives, etc., among gasolines offered for sale in the United States and Canada. Fuels contain- ing up to and including 10% ethanol or other oxygenates with up to 2.8% oxygen by weight, that is, 15% MTBE or 3% methanol plus an equivalent amount of co-solvent, will not void the applicable warranties with respect to defects in materials or workmanship.

The use of poor-quality fuels may result in drivability, starting and stalling problems

especially under certain environmental condi- tions such as high ambient temperature and high altitude. Should you encounter drivability problems which you suspect could be related to the fuel you are using, we recommend that you respond by switching to a recognized high-quality brand. Failure to comply with these recommendations may also result in unscheduled maintenance.<

W h

ee ls

a n

d ti

re s

170

Wheels and tires

Tire inflation pressure

Information for your safety It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pres- sure.

Check the tire inflation pressure regularly and correct it, if necessary: at least twice a

month and before starting long trips. If you fail to observe this precaution you may be driving on tires with incorrect tire pressures, a condi- tion that can not only compromise your vehi- cle's driving stability, but also lead to tire dam- age and the risk of an accident. Do not drive with deflated, i.e. flat tires, except when using Run-Flat Tires. A flat tire will seriously impair your vehicle's handling and braking response. Attempts to drive on a flat tire can lead to loss of control over the vehicle.<

Checking pressure Only check tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When tires are warm, the tire inflation pressure is higher.

After correcting tire inflation pressures, always reinitialize the Flat Tire Monitor,

refer to page 80.<

Inflation pressure specifications for factory-installed tires

The inflation pressures for your factory- installed tires at ambient temperature can be found on the door post when you open the driver's door.

Inflation pressure specifications for other tire sizes The tables below provide all the correct inflation pressures for the specified tire sizes at ambient temperature.

The inflation pressures apply to the tire sizes approved and tire brands recom-

mended by BMW; a list of these is available from your BMW center.<

For correct identification of the right tire infla- tion pressures, observe the following:

> Tire sizes for your vehicle

> Load conditions

> Maximum allowable driving speed

Tire inflation pressures for driving up to 100 mph or 160 km/h For normal driving up to 100 mph or 160 km/h adjust pressures to the respective tire inflation pressures listed on the following pages in the traveling speeds column for normal driving at speeds up to a maximum of 100 mph or 160 km/h to achieve optimum driving comfort.

The maximum permissible speed for these tire pressures is 100 mph or

M o

b il

it y

171

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

160 km/h. Do not exceed this speed, otherwise tire damage and accidents could occur.<

Tire inflation pressures for driving above 100 mph or 160 km/h

In order to drive at maximum speeds in excess of 100 mph or 160 km/h, please

observe, and, if necessary, adjust tire pressures for speeds exceeding 100 mph or 160 km/h from the relevant table on the following pages. Otherwise tire damage and accidents could oc- cur.<

Observe all national and local maximum speed limits, otherwise violations of the laws could occur.

W h

ee ls

a n

d ti

re s

172

Tire inflation pressures for 325i without Sports package

Tire size Pressure specifications in psi/kPa

Traveling speeds up to a max. of

100 mph / 160 km/h

Traveling speeds including those exceeding

100 mph / 160 km/h

All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature

225/50 R 16 92 V 205/55 R 16 91 H M+S 225/45 R 17 91 H M+S 225/45 R 17 94 V M+S XL

29/200 35/240 29/200 35/240 32/220 39/270

Front: 225/45 R 17 91 V 29/200 - 29/200 - 32/220 -

Rear: 255/40 R 17 94 V - 32/220 - 32/220 - 35/240

Front: 225/40 R 18 88 W 32/220 - 29/200 - 32/220 -

Rear: 255/35 R 18 90 W - 35/240 35/240 - 39/270

Front: 225/35 R 19 88 Y XL 35/240 - 32/220 - 35/240

Rear: 255/30 R 19 91 Y XL - 39/270 - 35/240 39/270

More details on the permissible load and weights can be found on page 201.

M o

b il

it y

173

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Tire inflation pressures for 325i with Sports package*

Tire size Pressure specifications in psi/kPa

Traveling speeds up to a max. of

100 mph / 160 km/h

Traveling speeds including those exceeding

100 mph / 160 km/h

All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature

225/50 R 16 92 V 225/45 R 17 94 V M+S XL

29/200 35/240 29/200 36/250 35/240 42/290

205/55 R 16 91 H M+S 225/45 R 17 91 H M+S

29/200 35/240 29/200 35/240 32/220 39/270

Front: 225/45 R 17 91 V 29/200 - 29/200 - 35/240 -

Rear: 255/40 R 17 94 V - 32/220 - 33/230 - 38/260

Front: 225/40 R 18 88 W 32/220 - 33/230 - 38/260 -

Rear: 255/35 R 18 90 W - 35/240 36/250 - 42/290

Front: 225/35 R 19 88 Y XL 35/240 - 33/230 - 38/260

Rear: 255/30 R 19 91 Y XL - 39/270 - 36/250 42/290

More details on the permissible load and weights can be found on page 201.

W h

ee ls

a n

d ti

re s

174

Tire inflation pressures for 330i without Sports package

Tire size Pressure specifications in psi/kPa

Traveling speeds up to a max. of

100 mph / 160 km/h

Traveling speeds including those exceeding

100 mph / 160 km/h

All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature

225/45 R 17 91 H M+S 225/45 R 17 94 V M+S XL

29/200 36/250 29/200 36/250 33/230 41/280

Front: 225/45 R 17 91 V 29/200 - 29/200 - 33/230 -

Rear: 255/40 R 17 94 V - 32/220 - 32/220 - 36/250

Front: 225/40 R 18 88 W 32/220 - 32/220 - 36/250 -

Rear: 255/35 R 18 90 W - 36/250 36/250 - 41/280

Front: 225/35 R 19 88 Y XL 36/250 - 32/220 - 36/250

Rear: 255/30 R 19 91 Y XL - 41/280 - 36/250 41/280

More details on the permissible load and weights can be found on page 201.

M o

b il

it y

175

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Tire inflation pressures for 330i with Sports package*

Tire size Pressure specifications in psi/kPa

Traveling speeds up to a max. of

100 mph / 160 km/h

Traveling speeds including those exceeding

100 mph / 160 km/h

All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature

225/45 R 17 94 V M+S XL 29/200 36/250 32/220 38/260 38/260 45/310

225/45 R 17 91 H M+S 29/200 36/250 29/200 36/250 33/230 41/280

Front: 225/45 R 17 91 V 29/200 - 32/220 - 38/260 -

Rear: 255/40 R 17 94 V - 32/220 - 35/240 - 41/280

Front: 225/40 R 18 88 W 32/220 - 35/240 - 38/260 -

Rear: 255/35 R 18 90 W - 36/250 38/260 - 45/310

Front: 225/35 R 19 88 Y XL 36/250 - 35/240 - 38/260

Rear: 255/30 R 19 91 Y XL - 41/280 - 38/260 45/310

More details on the permissible load and weights can be found on page 201.

W h

ee ls

a n

d ti

re s

176

Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires.

Tire size

Speed code letter Q = up to 100 mph or 160 km/h

T = up to 118 mph or 190 km/h

H = up to 131 mph or 210 km/h

V = up to 150 mph or 240 km/h

W = up to 167 mph or 270 km/h

Y = up to 186 mph or 300 km/h

Tire Identification Number Tires with DOT codes meet the guidelines of the U.S. Department of Transport.

DOT code:

Tire age The manufacturing date of tires is contained in the tire coding: DOT 0705 means that the tire was manufactured in week 7 of 2005.

BMW recommends that you replace all tires after 6 years at most, even if some tires may last for 10 years.

Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:

Tread wear 200 Traction AA Temperature A

DOT Quality Grades Tread wear Traction AA A B C Temperature A B C

All passenger car tires must conform to Federal Safety Requirements in addition

to these grades.<

Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov- ernment test course. For example, a tire graded 150 would wear one and one-half (1) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, how- ever, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteris- tics and climate.

Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test sur- faces of asphalt and concrete. A tire marked C may have poor traction performance.

The traction grade assigned to this tire is based on straight-ahead braking traction

tests, and does not include acceleration, cor- nering, hydroplaning, or peak traction charac- teristics.<

e.g.

Nominal width in mm Aspect ratio in Radial belt construction Rim diameter in inches Load rating, not on ZR tires Speed code letter, in front of the R on ZR tires

225/45 R 17 91 V

e.g.

Manufacturer's code for tire make Tire size and tire design Tire age

DOT xxxx xxx 0705

M o

b il

it y

177

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Temperature The temperature grades are A, the highest, B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehi- cle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

The temperature grade for this tire is established for a tire that is properly

inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sep- arately or in combination, can cause heat buildup and possible tire failure.<

RSC Run-Flat Tires You will recognize Run-Flat Tires by a circular symbol containing the letters RSC on the side of the tire, refer to page 178.

M+S Winter and all-season tires. These have better winter properties than sum- mer tires.

XL Designation for specially reinforced tires.

Tire condition Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth.

Minimum tread depth The tread depth should not drop below 1/8 in/ 3 mm, although, for example, European legisla- tion only specifies a minimum tread depth of

1/16 in/1.6 mm. At tread depths below 1/8 in/ 3 mm there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface. When winter tires wear down past a tread depth of 1/6 in/4 mm, they become perceptibly less suitable for winter conditions. For the sake of safety, new tires should be installed.

Wear indicators in the base of the tread groove are distributed around the tire's circumference; the letters TWI, Tread Wear Indicator, on the tire's sidewalls identify tires that incorporate these wear indicators. Once the tire tread has worn down to the wear indicators, the tire has worn to a depth of 1/16 in/1.6 mm.

Wheel/tire damage Please note that low-profile tires cause wheels, tires and suspension parts to be more suscep- tible to road hazard and consequential dam- ages. Unusual vibrations encountered during normal vehicle operation can indicate tire failure or some other vehicle defect. This can, for exam- ple, be caused by driving over curbs. The same applies to any other abnormal road behavior, such as pulling severely to the right or left.

In these cases, reduce speed immedi- ately and have wheels and tires thor-

oughly checked. To do so, drive carefully to the nearest BMW center or tire shop that works according to BMW repair procedures with cor- respondingly trained personnel. If necessary, have the vehicle towed there. Tire damage can be extremely dangerous for vehicle occupants and other road users.<

W h

ee ls

a n

d ti

re s

178

Servicing tires Unprofessional attempts by laymen to service tires can lead to damage and acci-

dents. Have this work performed by skilled pro- fessionals only. The technicians at your BMW center will be glad to assist you with the required professional knowledge and special- ized equipment.<

Tire age For various reasons, such as the development of brittleness, BMW recommends tire replace- ment after no more than 6 years, regardless of the actual wear of the tires.

The manufacturing date of tires is contained in the tire coding: DOT ... 0705 means that the tire was manufac- tured in week 07 of 2005.

Run-Flat Tires

The symbol identifying Run-Flat Tires is a circle with the letters RSC on the sidewall. Run-Flat Tires comprise a conditionally self- supporting tire and a special rim. The reinforce- ment in the sidewalls ensures that the tire can continue to be used subject to certain restric- tions, even if depressurized.

For information on continuing to drive with a flat tire, refer to Indication of a flat tire, page 81.

New wheels and tires Have new wheels and tires installed only by your BMW center or tire shop that

works according to BMW repair procedures

with correspondingly trained personnel. If this work is not carried out properly, there is a dan- ger of subsequent damage and related safety hazards. Make sure that the new wheels are bal- anced.<

Retreaded tires BMW recommends that you do not use retreaded tires, since driving safety may

be impaired. The causes for this include poten- tially different tire casing structures and often wide variations in tire age, which can result in a limited service life.<

The right wheels and tires BMW recommends that you use only wheel and tire combinations that BMW

has tested and approved for your particular vehicle. Variations in factors such as manufac- turing tolerances mean that even wheels and tires with identical official size ratings could actually have different dimensions, which could lead to body contact and thus to severe acci- dents. If non-approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot guarantee their driving safety.<

You can inquire about the right wheel/tire com- bination at your BMW center.

The correct combination of wheels and tires is also necessary to ensure reliable operation of various vehicle systems such as ABS and DSC.

To maintain good handling and vehicle response, use only tires of a single brand and tread configuration. After a tire has been dam- aged, mount the previous wheel and tire combi- nation again as soon as possible.

M o

b il

it y

179

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Recommended tire brands

Certain makes of tire are recommended by BMW for each tire size. They are marked with a clearly visible BMW designation on the sidewall of the tire.

When properly used, these tires meet the high- est standards in terms of safety and handling characteristics.

Run-Flat Tires When mounting new tires or changing over from summer to winter tires and vice versa, mount Run-Flat Tires for your own safety. In the event of a flat, moreover, no spare wheel is available. Your BMW center will be glad to advise you.

For safety reasons, BMW recommends that damaged Run-Flat Tires be replaced

rather than repaired.<

Special characteristics of winter tires BMW recommends winter tires for use in cold winter driving conditions. Although all-season M+S tires provide better winter traction than summer tires, they generally fail to provide the same levels of cold-weather performance as winter tires.

Pay attention to speed Always comply with the speed limit for the winter tires mounted on your car; failure

to do so could result in tire damage and acci- dents.<

If the car is capable of speeds higher than that permitted for the winter tires, a label stating the maximum permitted speed for the mounted tires must be displayed in your field of view.

Specialist tire dealers and your BMW center can supply these labels.

Storage Always store wheels and tires in a cool, dry place with as little exposure to light as possible. Always protect tires against all contact with oil, grease and fuels. Do not exceed the maximum tire inflation pressure indicated on the sidewall of the tire.

Snow chains* Only certain fine-link snow chains have been tested by BMW, classified as safe for use and recommended. Consult your BMW center for more information. Attach snow chains in pairs and only to the rear wheels. Observe the manu- facturer's instructions when mounting snow chains. Do not exceed a speed of 30 mph or 50 km/h.

You are not permitted to mount snow chains to tires of the following sizes:

> 255/40 R 17

> 255/35 R 18

> 255/30 R 19

Do not initialize the Flat Tire Monitor if snow chains are mounted, as the instru-

ment might issue an incorrect reading. When driving with snow chains, you may find it helpful to switch on DTC temporarily, refer to page 79.<

U n

d er

th e

h o

o d

180

Under the hood

Do not work on the car unless you pos- sess the necessary technical knowledge.

If you are unfamiliar with the statutory guide- lines, have any work on the vehicle performed only by a BMW center or by a workshop that work according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a danger of subsequent damage and related safety haz- ards.<

Hood

Releasing

Pull the lever.

Opening

In order to avoid damage, make sure that the wiper arms are against the windshield

before you open the hood.<

Press the release handle and open the hood.

Closing

Close the hood from a height of approx. 16 in/ 40 cm with momentum. It must be clearly heard to engage.

Make sure that the closing path of the hood is clear, as otherwise injuries may

result. If you see any signs while driving your vehicle that the hood is not completely closed, stop at once and close it securely.<

M o

b il

it y

181

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Engine compartment

1 Expansion tank for coolant, refer to page 183

2 Vehicle Identification Number

3 Washer fluid reservoir for headlamp clean- ing system and windshield washer system, refer to page 55

4 Jump-starting connection, refer to page 194

5 Filler neck for engine oil, refer to Adding engine oil

6 Reservoir for brake fluid, under the cover of the microfilter

Engine oil The engine oil consumption is dependent on driving style and driving conditions.

Checking oil level Your car is equipped with an electronic oil-level monitor.

For a precise measurement and display of the oil level, it is necessary that the engine be at operating temperature, e.g. after uninterrupted driving for at least approx. 6.5 miles/10 km. You can have the oil level displayed while you are driving, or while the vehicle is at a standstill on a level surface and the engine is running.

Display in the instrument cluster

1. Lightly push button 1 in the turn indicator stalk repeatedly up or down until the appro- priate symbol is shown in the display, accompanied by the word "OIL".

2. Press button 2 in the turn indicator stalk. The oil level is checked and the reading dis- played.

U n

d er

th e

h o

o d

182

Possible displays

1 Oil level OK

2 Oil level is being checked. This can take about 3 minutes if the car is at a standstill on a level surface, or about 5 minutes while the car is on the move.

3 Oil level down to minimum: Add 1.1 US quarts/1 liter of engine oil as soon as possible, refer also to Adding engine oil.

4 Oil level is too high.

Too much oil will harm the engine. Have the vehicle checked without

delay.<

5 The oil level sensor is defective. Do not add engine oil. You can continue your journey. Note the newly calculated dis- tance remaining to the next oil service, refer to page 185. Have the system checked as soon as possible.

Display via iDrive iDrive concept, refer to page 16.

1. Press the button. This opens the start menu.

2. Press the controller to open the menu.

3. Select "Service" and press the controller.

4. Select "Service requirements" and press the controller.

5. Select "Engine oil level" and press the con- troller. The oil level is displayed.

In order to exit from the display immediately: Select and press the controller.

Possible messages > "Engine oil level O.K."

> "No measured value available: Updating engine oil level measurement..." The engine oil level is measured. This can take about 3 minutes if the car is at a stand- still on a level surface and the engine is run- ning, and about 5 minutes while the car is on the move.

> "Oil level at the minimum! Refill with 1 quart engine oil" Add engine oil as soon as possible, but no more than 1.1 US quarts/1 liter, refer also to Adding engine oil below.

> "Engine oil level too high"

Too much oil will harm the engine. Have the vehicle checked without

delay.<

M o

b il

it y

183

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

> "Please observe recalculated service inter- val for engine oil" Do not add engine oil. You can continue your journey. Note the newly calculated dis- tance remaining to the next oil service, refer to page 185. Have the system checked as soon as possible.

Adding engine oil

Do not add the maximum amount of 1.1 US quarts/1 liter of engine oil until a corre- sponding message is shown on the Control Dis- play.

Add oil within the next 125 miles/200 km, otherwise the engine could be dam-

aged.<

Keep oils, greases, etc. out of the reach of children and comply with the warnings on

the containers. Otherwise, health hazards may result.<

Oil change Have oil changed only at your BMW center or at a workshop that works according to BMW repair procedures with correspondingly trained personnel.

Specified engine oils The quality of the engine oil selected has critical significance for the operation and service life of an engine. BMW continuously approves spe- cific oils after confirming their suitability for use in its vehicles with extensive testing.

Use only approved BMW High Performance Synthetic Oil.

If you are unable to obtain BMW High Perfor- mance Synthetic Oil, you can add small

amounts of another synthetic oil between oil changes. Use only oils with the API SH specifi- cation or higher.

Ask your BMW center for details concern- ing the specific BMW High Performance

Synthetic Oil or synthetic oils which have been approved.<

You can also call BMW of North America

at 1-800-831-1117 or visit this website: www.bmwusa.com to obtain this information.

Viscosity ratings Viscosity is the oil flow rating as defined in SAE classes.

The selection of the correct SAE class depends on the climatic conditions in the area where you typically drive your BMW.

Approved oils are in SAE classes 5W-40 and 5W-30.<

These oils may be used for driving in all ambient temperatures.

Coolant Do not add coolant to the cooling system when the engine is hot. Escaping coolant

can cause burns.<

Coolant is a mixture of water and an additive. Not all commercially available additives are suit- able for your BMW. Ask your BMW center for suitable additives.

Only use suitable additives, as otherwise engine damage may result. The additives

are hazardous to your health.<

Comply with the appropriate environ- mental protection regulations when dis-

posing of coolant additives.<

Checking coolant level 1. The engine must be at ambient tempera-

ture.

2. Turn the cap of the expansion tank counter- clockwise to allow any accumulated pres- sure to escape, then continue turning to open.

U n

d er

th e

h o

o d

184

3. The coolant level is correct if it is between the maximum and minimum marks in the filler neck, refer also to the diagram next to the filler neck.

4. If the coolant is low, slowly add coolant up to the specified level; do not overfill.

5. Turn the cap until there is an audible click.

6. Have the reason for the coolant loss elimi- nated as soon as possible.

Brake system

Malfunctions

Brake fluid The warning lamps light up in red even though the handbrake has been released. A message appears on the Control Display. Stop immediately.

The brake fluid in the reservoir has fallen to below the minimum level. At the same time, a considerably longer brake pedal travel may be noticeable. Have the system checked without delay.

Display of this malfunction on Cana- dian models.

If you continue to drive the car, you may have to apply more pressure to the brake

pedal and braking distances may be signifi- cantly longer. Please adapt your driving style accordingly.<

Brake pads The warning lamps light up in red even though the handbrake has been released. A message appears on the Control Display. The brake pads have

reached the safe limit for pad wear. Have brake pads replaced immediately.

Display of this malfunction on Cana- dian models.

For your own safety: use only brake pads that BMW has approved for the corre-

sponding vehicle model. BMW is unable to assess the suitability of brake pads it has not approved and therefore cannot guarantee their safety.<

M o

b il

it y

185

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Maintenance

The BMW Maintenance System

The BMW Maintenance System supports the preservation of the traffic and operating safety of your BMW. The service schedule also includes operations related to the vehicle's comfort and convenience features, such as replacement of the filters for the inside air. The objective is to optimize efforts with respect to minimal vehicle maintenance costs.

If and when you come to sell your BMW, a com- prehensive record of servicing will prove a sig- nificant benefit.

CBS Condition Based Service Sensors and special algorithms take the differ- ent driving conditions of your BMW into account. Condition Based Service uses this to determine the current and future service requirements. By letting you define a service and maintenance regimen that reflects your own individual requirements, the system builds the basis for trouble-free driving.

On the Control Display, you can have the remaining times or distances for selected main- tenance tasks and any legally prescribed dates displayed, refer to page 69:

> Engine oil

> Brakes: separately for front and rear

> Microfilter/activated-charcoal filter

> Brake fluid

> Spark plugs

> Vehicle check

> Legally mandated inspections depending on local regulations

Service data in the remote control Your vehicle continuously stores service- requirement information in the remote control while you are driving. Your BMW Service Advi- sor can read out this data from the remote con- trol unit, and propose an optimized mainte- nance approach. Whenever you take your car in for servicing you should therefore hand your BMW Service Advisor the remote control unit that you last used.

Make sure that the date is always set cor- rectly, refer to page 72; otherwise the

effectiveness of Condition Based Service CBS is not assured.<

Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models Please consult your Service and Warranty Infor- mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service require- ments.

BMW recommends that you have service and repair operations performed at your

BMW center. Take the time to ensure that these service pro- cedures are confirmed by entries in your vehi- cle's Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models. These entries verify that your vehicle has received the speci- fied regular maintenance.<

M ai

n te

n an

ce

186

OBD Socket

The Onboard Diagnostics OBD interface socket is located on the left of the driver's side under the instrument panel and under a cover.

The cover has the letters OBD on it.

The purpose of the OBD system is to ensure proper operation of the emissions control sys- tem for the vehicle's lifetime. The system mon- itors emissions-related components and sys- tems for deterioration and malfunction.

An illuminated lamp informs you of the need for service, not of the need to stop the vehicle. However, the sys- tems should be checked by your

BMW center at the earliest possible opportu- nity.

Display of this malfunction on Cana- dian models.

Under certain conditions, the indica- tor will blink or flash. This indicates a

rather severe level of engine misfire. When this occurs, you should reduce speed and consult the nearest BMW center as soon as possible. Severe engine misfire over only a short period of time can seriously damage emissions control components, especially the catalytic converter.

When the gas cap is not properly tight- ened, the OBD system can detect the

vapor leak and the indicator will light up. If the gas cap is subsequently tightened, the indicator should go out within a few days.<

Event data recorders Your vehicle may be equipped with one or more sensing and diagnostic modules or a recording device capable of recording or transmitting cer-

tain vehicle data or information. In addition, if you have a Subscription Service Agreement for the BMW Assist system, certain vehicle infor- mation may be transmitted or recorded in order to provide such services.

Care Important information on the care and mainte- nance of your BMW is contained in the Caring for your vehicle brochure.

M o

b il

it y

187

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Replacing components

Onboard tool kit

The onboard tool kit is stored in a compartment on the right-hand side of the luggage compart- ment. Remove the cover.

Wiper blade replacement

1. Fold up the wiper arm.

2. Remove the cover. To do so, press the hook on the bottom, see arrow.

Swing the

3. Fold the wiper blade upwards.

4. Remove the wiper blade in the direction of the windshield, see arrow.

In order to avoid damage, make sure that the wiper arms are against the windshield

before you open the engine compartment.<

Lamps and bulbs Lamps and bulbs make an essential contribu- tion to vehicle safety. They should, therefore, be handled carefully. BMW recommends hav- ing your BMW center perform any work that you do not feel competent to perform yourself or that is not described here.

Never touch the glass of new bulbs with your bare fingers, as even minute

amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or similar, or hold the bulb by its base.<

You can obtain a selection of replacement bulbs at your BMW center.

When working on electrical systems, always begin by switching off the con-

sumer in question, as otherwise short-circuits could result. To avoid possible injury or equip- ment damage when replacing bulbs, observe any instructions provided by the bulb manufac- turer.<

For care and maintenance of the headlamps, please follow the instructions in the separate Caring for your vehicle brochure.

If the routine for changing a particular bulb is not described here, please contact

your BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.<

Xenon lamps* The service life of these bulbs is very long and the probability of a failure is very low, provided that they are not switched on and off an unusual number of times. If a xenon lamp fails neverthe- less, switch on the fog lamps and continue the

R ep

la ci

n g

c o

m p

o n

en ts

188

journey with great care, provided that local leg- islation does not prohibit this.

Have work on the xenon lighting system performed only by your BMW center or a

workshop that works according to BMW repair procedures with correspondingly trained per- sonnel. Due to the high electrical voltages present, there is a risk of potentially fatal acci- dents if work is performed inappropriate.<

Parking lamps, roadside parking lamps In the event of a malfunction, please contact your BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.

Halogen lamps H7 bulb, 55 watts

Always wear gloves and eye protection; the atmosphere within the H7 bulb is

pressurized. Otherwise there is a risk of injury if the bulb is damaged.<

There are separate headlamp covers for low- beam headlamps and high-beam headlamps.

Be careful when installing the covers, as otherwise leaks could occur and cause

damage to the headlamp system.<

For checking and adjusting headlamp aim, please contact your BMW center.<

Access to the lamps The high-beam headlamp can be accessed from the engine compartment, whereas the low-beam headlamp is accessed through a flap in the wheel well.

1 Cover for high-beam headlamp

2 Cover for low-beam headlamp

3 Turn signal

To remove the covers:

1. Fold the respective wire bracket to the side, see arrows.

2. Flip open the cover and take it out of the guide.

Follow the same steps in reverse order to reat- tach the covers.

Access through the wheel well Only for low-beam headlamps and turn signals:

1. Turn the wheel inwards.

2. Open the flap in the wheel well.

Changing low-beam and high-beam bulbs 1. Remove the relevant cover for the head-

lamp.

2. Disconnect the plug from the lamp.

M o

b il

it y

189

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

3. Push the wire bracket to the side out of the mounting, arrow 1, and fold it down, arrow 2.

4. Remove the bulb.

5. Insert the new bulb.

6. Fold up the wire bracket and clamp it.

7. Connect the plug.

8. Reattach the cover.

Parking lamps, roadside parking lamps 5 watt bulb, W 5 W

1. Remove the cover for the high-beam head- lamp.

2. Pull out the bulb holder, see arrow.

3. Remove and replace the bulb.

4. Insert the bulb holder.

5. Reattach the cover.

Turn signals, front 21 watt bulb, PY 21 W or PY 21 W Silver Vision

1. Turn bulb holder 1 to the left and remove.

2. Apply gentle pressure to the bulb while turning it to the left for removal and replace- ment.

3. Insert bulb holder 1.

4. Attach the flap to the wheel well.

Side-mounted turn signals 5 watt bulb, WY 5 W or WY 5 W-ST (Silver Top)

1. Press back against the front edge of the light with the tip of your finger, then pivot it out.

2. Extract the bulb for replacement.

3. Insert the lamp.

Tail lamps 21 watt bulbs, P 21 W

The tail lamps are divided into two parts. One part is in the luggage compartment lid, the other is in the fender.

R ep

la ci

n g

c o

m p

o n

en ts

190

1 Brake lamp

2 Roadside parking lamp/tail lamp

3 Turn signal

4 Backup lamp

5 Tail lamp

6 Brake lamp

Lamps in the luggage compartment lid

1. Pry out the plastic plugs in the trim of the luggage compartment lid using a screw- driver and remove the trim.

2. Unfasten the bulb holder at the clip, see arrow, and remove.

3. Apply gentle pressure to the bulb while turning it to the left for removal and replace- ment.

4. Re-engage the bulb holder so that it audibly clicks into place.

5. Reattach the trim of the luggage compart- ment lid.

Fender-mounted lamps

1. Using a screwdriver, pry off the cover in the luggage compartment or release the turn- lock fastener by turning it counterclockwise and remove the cover.

2. Unfasten the bulb holder at the clip, see arrow, and pull out.

3. Apply gentle pressure to the bulb while turning it to the left for removal and replace- ment.

4. Re-engage the bulb holder so that it audibly clicks into place.

5. Reattach the cover in the luggage compart- ment.

License plate lamp 5 watt bulb, C 5 W

1. Using a screwdriver, push the lamp to the left in the flap of the lamp housing.

2. Take out the lamp towards the right and change the bulb.

3. Insert the lamp.

Center brake lamp This lamp uses LED technology for operation. In the event of a malfunction, please contact your BMW center or a workshop that works

M o

b il

it y

191

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

according to BMW repair procedures with cor- respondingly trained personnel.

Light-emitting diodes LEDs Light-emitting diodes installed behind translu- cent lenses serve as the light source for many of the controls and displays in your vehicle. These light-emitting diodes, which operate using a concept similar to that applied in conventional lasers, are officially designated as Class 1 light- emitting diodes.

Do not remove the covers or expose the eyes directly to the unfiltered light source

for several hours at a time, as this could cause irritation to the retina.<

Changing wheels Your BMW is equipped with Run-Flat Tires as standard. This removes the need to change a wheel immediately in the event of a puncture.

The symbol identifying Run-Flat Tires is a circle with the letters RSC on the sidewall, refer to Run-Flat Tires, page 178.

When mounting new tires or changing over from summer to winter tires and vice versa, mount Run-Flat Tires for your own safety. In the event of a flat, moreover, no spare wheel is available. Your BMW center will be glad to advise you. Refer also to New wheels and tires, page 178.

The tools for changing wheels are avail- able as optional accessories from your

BMW center.<

Jack mounting points

The jacking points are at the positions shown in the illustration.

Vehicle battery

Battery care The battery is 100% maintenance-free, the electrolyte will last for the life of the battery when the vehicle is operated in a temperate cli- mate. Your BMW center will be glad to advise in all matters concerning the battery.

Charging battery Only charge the battery in the vehicle via the terminals in the engine compartment with the engine off. Connections, refer to Jump starting on page 194.

Disposal Have old batteries disposed of by your BMW center or hand them in to a recy-

cling center. Maintain the battery in an upright position for transport and storage. Always secure the battery against tipping over during transport.<

Power failure After a temporary power loss, the functioning of some equipment may be limited and require reinitialization. Individual settings may likewise have been lost and will have to be repro- grammed:

> Time and date These values must be updated, refer to page 71.

R ep

la ci

n g

c o

m p

o n

en ts

192

> Radio In some cases, stations may have to be memorized again, refer to page 140.

> Navigation system Wait until the system starts, refer to page 130.

Fuses Never attempt to repair a blown fuse and do not replace a defective fuse with a sub-

stitute of another color or amperage rating, as this could lead to a circuit overload, ultimately resulting in a fire in the vehicle.<

In the glove compartment

Open the cover in the glove compartment and remove it.

Spare fuses and a pair of plastic forceps are set in holders on the distributor box.

See the rear of the cover for information on fuse assignment.

M o

b il

it y

193

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Giving and receiving assistance

Emergency calling* Conditions for an emergency call:

> Radio readiness is switched on.

> The car phone is logged on to a portable telephone network.

> The emergency call system is operable.

Initiating an emergency call 1. To open the protective cover of the keypad:

touch the protective cover.

2. Press the button for at least 2 seconds. The indicator lamp in the button lights up. As soon as the voice connection to the BMW Assist response center has been estab- lished, the indicator lamp flashes.

If conditions allow, remain in the vehicle until the connection has been established. You will then be able to provide a detailed description of the situation.

In vehicles with BMW Assist enabled, if the cur- rent location of your vehicle can be determined, it will be transmitted to the BMW Assist response center. To enable BMW Assist, refer to page 160.

If the indicator lamp is flashing but the emer- gency call center cannot be heard over the hands-free system, it is possible that the hands-free system is malfunctioning. The emergency call center may still be able to hear you, however.

Under certain conditions, an emergency call is automatically initiated immediately after a

severe accident. The automatic emergency call is not affected by the button being pressed.

For technical reasons, the emergency call cannot be guaranteed under unfavorable

conditions.<

Roadside Assistance The BMW Group's Roadside Assistance ser- vice is there to assist you around the clock in the event of a breakdown, including on week- ends and public holidays.

The phone numbers of the Roadside Assis- tance in your home country can be found in the Contact brochure.

In vehicles equipped with BMW Assist or TeleService, you can establish contact with the BMW Group's Roadside Assistance for break- down assistance directly via iDrive, refer to page 162.

First-aid kit*

The first-aid pouch is on the right-hand side of the luggage compartment in a storage area.

Some of the articles contained in the first- aid kit have a limited service life. There-

fore, check the expiration dates of the contents regularly and replace any items in good time, if necessary. You can find replacements in any pharmacy. Comply with the applicable legislation requiring

G iv

in g

a n

d re

ce iv

in g

a ss

is ta

n ce

194

you to have a first-aid kit and a warning triangle in the car.<

Warning triangle*

The warning triangle is on the left-hand side of the luggage compartment. Press the tab to take it out.

Jump starting If the car's own battery is flat, your BMW's engine can be started by connecting two jumper cables to another vehicle's battery. You can also use the same method to help start another vehicle. Use only jumper cables with fully-insulated clamp handles.

Do not touch any electrically live parts when the engine is running, or a fatal acci-

dent may occur. Carefully adhere to the follow- ing sequence, both to prevent damage to one or both vehicles, and to guard against possible personal injuries.<

Preparation 1. Check whether the battery of the other

vehicle has a voltage of 12 volts and approximately the same capacitance in Ah. This information can be found on the bat- tery.

2. Switch off the engine of the assisting vehi- cle.

3. Switch off any consumers in both vehicles.

There must not be any contact between the bodies of the two vehicles, as other-

wise there is a danger of shorting.<

Connecting jumper cables Always connect the jumper cables in the correct order, so that no sparks which

could cause injury occur at the battery.<

Your BMW has a jump-starting connection in the engine compartment which acts as the bat- tery's positive terminal, refer also to the Engine compartment overview on page 181. The cap is marked with +.

1. Pull the cap of the BMW jump-starting con- nection up to remove.

2. Attach one terminal clamp of the plus+ jumper cable to the positive terminal of the battery or a starting-aid terminal of the vehi- cle providing assistance.

3. Attach the second terminal clamp of the plus+ jumper cable to the positive terminal of the battery or a starting-aid terminal of the vehicle to be started.

4. Attach one terminal clamp of the minus jumper cable to the negative terminal of the battery or to an engine or body ground of the assisting vehicle. Your BMW has a special nut as body ground or negative pole.

5. Attach the second terminal clamp of the minus jumper cable to the negative termi-

M o

b il

it y

195

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

nal of the battery or to the engine or body ground of the vehicle to be started.

Starting the engine 1. Start the engine of the donor vehicle and

allow it to run for a few minutes at an increased idle speed.

2. Start the engine on the other vehicle in the usual way. If the first start attempt is not successful, wait a few minutes before another attempt in order to allow the discharged battery to recharge.

3. Let the engines run for a few minutes.

4. Disconnect the jumper cables by reversing the above connecting sequence.

If necessary, have your BMW center check and recharge the battery.

Never use spray fluids to start the engine.<

Tow-starting, towing away Always observe all applicable towing laws and regulations.<

Never allow passengers to ride in a towed vehicle for any reason.<

Using a tow fitting The screw-in tow fitting must always be carried on the car. It can be screwed in at the front or rear of the BMW.

It is stored in the onboard tool kit underneath the cover on the right-hand side of the luggage compartment, refer to page 187.

In order to avoid damaging the tow fitting and the vehicle, please follow these instructions: use only the tow fitting provided with the vehi- cle and screw it all the way in. Use the tow fitting for towing only on roads. Avoid lateral loading of the tow fitting, e.g. do not lift the vehicle by the tow fitting.

Access to screw thread Rectangular cover panel in bumper: Press on the upper edges of the cover panel.

Front

Rear

Being towed Make sure that the ignition is switched on, refer to page 49, as the low beams, tail

lamps, turn signals and windshield wipers would no longer be available. If the electrical system fails, do not attempt to tow away or tow- start the vehicle. The electric steering wheel lock cannot be disengaged and the car is not steerable. Jump starting, refer to page 194. Power steering assistance is not available when the engine is not running. Thus, braking and steering will require increased effort.<

Switch on the hazard warning flashers, depend- ing on local regulations.

Vehicles with manual transmission Gearshift lever in neutral position.

G iv

in g

a n

d re

ce iv

in g

a ss

is ta

n ce

196

Vehicles with automatic transmission Selector lever in position N. Changing selector lever positions, refer to page 52.

Do not exceed a towing speed of 45 mph or 70 km/h and a towing distance of

90 miles/150 km, as otherwise the automatic transmission may be damaged.<

Towing methods In some countries, towing with tow bars or ropes is not permitted in public traffic.

Familiarize yourself with the regulations on tow- ing in the respective country.

With tow bar The towing vehicle must not be lighter than the towed vehicle, otherwise it may

be impossible to maintain control.<

The tow fittings used should be on the same side on both vehicles. Should it prove impossi- ble to avoid mounting the tow bar at an angle, please observe the following:

> Clearance and maneuvering capability will be sharply limited during cornering.

> The tow bar will generate lateral forces if it is attached offset.

Secure the tow bar to the tow fitting only. Otherwise damage to other vehicle parts

could result.<

With tow rope When starting off in the towing vehicle, make sure that the tow rope is taut.

To avoid jerking and the associated stresses on vehicle components when

towing, always use nylon ropes or nylon straps. Secure the tow rope to the tow fitting only. Oth- erwise damage to other vehicle parts could result.<

With tow truck

Have the BMW transported with a tow truck with a so-called lift bar or on a flat bed.

Do not lift the vehicle by a tow fitting or body and chassis parts, as otherwise

damage may result.<

Tow-starting If the electrical system fails, do not attempt to tow-start or tow away the car.

The electric steering wheel lock cannot be dis- engaged and the car is not steerable. Jump starting, refer to page 194.<

Do not tow-start vehicles with an auto- matic transmission. Only tow-start vehi-

cles with a catalytic converter with the engine cold. It is better to jump start the engine, refer to page 194.<

1. Switch on the hazard warning flashers, comply with local regulations.

2. Switch on the ignition, refer to page 49.

3. Shift into 3rd gear.

4. Have the vehicle tow-started with the clutch pedal completely depressed and slowly release the clutch. After the engine starts, immediately depress the clutch pedal com- pletely again.

5. Stop at a suitable location, remove the tow bar or rope and switch off the hazard warn- ing flashers.

6. Have the vehicle checked.

M o

b il

it y

197

R e

fe re

n ce

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t

Reference This chapter contains technical data, short

commands for the voice command system and an index which will help you find information the

most quickly.

T ec

h n

ic al

d at

a

200

Technical data

Engine data

Dimensions

325i 330i

Displacement Number of cylinders

cu in/cm 182.8/2,996 6

182.8/2,996 6

Maximum output at engine speed

hp rpm

215 6,250

255 6,600

Maximum torque at engine speed

lb ft/Nm rpm

185/251 2,750

220298 2,750

All dimensions given in inches/mm. Smallest turning circle diam.: 36 ft 1 in/11.0 m

R e

fe re

n ce

201

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Weights

Never exceed either the approved axle loads or the gross vehicle weight.

Capacities

325i 330i

Curb weight with manual transmission with automatic transmission

lbs./kg lbs./kg

3,285/1,490 3,351/1,520

3,417/1,550 3,450/1,565

Approved gross weight with manual transmission with automatic transmission

lbs./kg lbs./kg

4,343/1,970 4,409/2,000

4,475/2,030 4,508/2,045

Load lbs./kg 1,058/480 1,058/480

Approved front axle load lbs./kg 2,072/940 2,138/970

Approved rear axle load lbs./kg 2,425/1,100 2,469/1,120

Approved roof load capacity lbs./kg 165/75 165/75

Luggage compartment volume cu ft/l 16.2/460 16.2/460

Notes

Fuel tank including reserve of

gal/liters gal/liters

approx. 15.9/60 approx. 2.1/8.0

Fuel grade: page 169

Windshield washer system including headlamp washers quarts/liters approx. 1.6/6.0

For more details: page 55

Engine with oil filter renewal quarts/liters approx. 6.9/6.5

BMW High Performance Synthetic Oil

Oil grades: page 183

S h

o rt

c o

m m

an d

s fo

r t h

e vo

ic e

co m

m an

d s

ys te

m

202

Short commands for the voice command system

With short commands you can carry out certain functions directly, regardless of which menu

item is selected. Here are the important short commands for the voice command system.

Assistance window

Communication

Navigation

*

Function Command

To call up assistance window 21 {Assistance window}

To select display in the assistance window 21 {Assistance window map facing north}, {Assistance window map direction of travel}, {Assistance window arrow display}, {Assistance window perspective}, {Assistance window current position}, {Assistance window trip computer} or {Assistance window onboard info}

Function Command

To open phone 153 {Phone}

Dial phone number 153 {Dial number}

To display phone book 154 {A to Z}

To select from phone book 154 {Call ...} or {Dial name}

To display "Top 8" 155 {Top 8}

Redialing 155 {Redial}

To display "Received calls" 155 {Received calls}

To display "Missed calls" 155 {Missed calls}

Function Command

To call up navigation 119 {Navigation}

To display current position 129 {Current position}

To open "Enter address" 115 {Enter address}

To open "New destination" 115 {New destination}

To display "Input map" 118 {Input map}

To open "Information" 119 {Info menu}

To display address book 121 {Address book} or {From address book}

R e

fe re

n ce

203

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Onboard info

Entertainment

To display destination list 120 {Destination list}

To switch on destination guidance 125 {Start guidance}

To switch off destination guidance 125 {Stop guidance}

To display route preferences 123 {Route preference}

To switch on voice instructions 127 {Navigation info on}

To switch off voice instructions 127 {Navigation info off}

To repeat voice instructions 128 {Repeat navigation info}

To show arrow display 126 {Arrow display}

Displaying map 126 {Map}, {Map facing north}, {Map direction of travel} or {Perspective}

To call up a route 117, 126 {Route}

To open "New route" 123 {New route}

To change scale 127 {Scale ... miles} or {Scale ... feet}

Displaying towns/cities and streets along the route 127

{Route list}

Function Command

Function Command

To open "Car Data" 66 {Car Data}

To display onboard info 66 {Onboard info}

To display trip computer 66 {Trip computer}

To open speed limit 75 {Limit}

To open stopwatch 75 {Stopwatch}

Function Command

Tone control 135 {Audio}

To switch on radio 138 {Radio on}

To open "FM" 138 {FM menu}

To open "AM" 138 {AM menu}

To open "All stations" 138 {FM All stations}

To select radio station 138 {Station} name or {Choose station}

To open "Presets" 138 {FM presets} or {AM presets}

S h

o rt

c o

m m

an d

s fo

r t h

e vo

ic e

co m

m an

d s

ys te

m

204

Climate

menu

To select radio presets 138 {Preset ...} or {Choose preset}

To open "Manual" 139 {FM manual} or {AM manual}

To open strongest radio station 139 {AM Autostore}

To call up CD player 145 {CD menu}

To switch on CD player 145 {CD}

To call up CD changer 145 {CD changer menu}

To switch on CD changer 145 {CD changer}

To select CD 145 {CD 1...6}

To select CD and music track 146 {CD 1...6 track ...}

To select track 146 {Track ...}

To open "Audio Aux" 149 {Audio Aux menu}

To call up DVD 145 {DVD player menu}

To switch on DVD 145 {DVD player}

Function Command

Function Command

To open "Vent settings" 90 {Vent settings}

To open "Automatic programs" 91 {Automatic programs}

Function Command

To open "Door locks" 30, 32 {Door locks}

To open "Steering wheel buttons" 45 {Steering wheel buttons}

To open "Lighting" 53 {Lighting}

To open "Communication settings" 160 {Communication settings}

To open "BMW Service settings" 160 {BMW Service settings}

To open "BMW Service" 162 {BMW Service}

To open "Service requirements" 70, 161 {Service requirements}

To open "Service" 70, 161 {Service}

To display "Check Control messages" 73 {Check Control messages}

To open "Display settings" 76 {Display settings}

To set brightness of Control Display 76 {Brightness}

To open "Units" 64 {Units}

To open "Languages" 76, 127 {Languages}

To open "Time" 71 {Time}

R e

fe re

n ce

205

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

To open "Date" 72 {Date}

To open "PDC" 77 {PDC}

To open "FTM" 80 {FTM}

To open "Entertainment settings" 135 {Entertainment settings}

Function Command

E ve

ry th

in g

fr o

m A

-Z

206

Everything from A-Z

Index

"..." Identifies Control Display texts used to select individual functions and refers you to the page where these texts can be found.

A ABS Antilock Brake

System 78 ACC, refer to Active cruise

control 57 Accessories, refer to The

individual vehicle 5 Activated-charcoal filter for

automatic climate control 92 Active cruise control 57 indicator lamps 60 malfunction 61 selecting distance 59 sensor 61 Active steering 81 initializing the system 82 warning lamp 82 Adaptive Head Light 86 "Add digits" for portable

phone 155 Additives coolant 183 "Address book" in

navigation 121 Address for navigation deleting 122 entering 115 selecting 121 storing current position 121 "Add to destination list" 118 Adjusting the temperature

with automatic climate control 90

Adjusting the tone during audio operation, refer to Tone control 135

Adjustment in audio mode front-to-rear 135 right/left balance 135 Airbags 82 sitting safely 38 warning lamp 84 Air distribution automatic 90 individual 90 Air flow rate 91 Airing, refer to Ventilation 92 Air pressure, tires 170 Air recirculation, refer to

Recirculated-air mode 91 "Air recirculation on / off" 45 Air vents 89 AKI, refer to Fuel

specifications 168 Alarm system 34 avoiding unintentional

alarms 35 interior motion sensor 35 switching off an alarm 34 tilt alarm sensor 35 "All channels" 142 All-season tires, refer to

Winter tires 179 "All stations", calling up on

radio 138 "AM", waveband 134, 138 AM, waveband 138 Ambient air, refer to

Recirculated-air mode 91 Antenna for portable

phone 152 Antifreeze coolant 183 washer fluid 55 Antilock Brake System ABS indicator lamp 79 Anti-theft alarm system, refer

to Alarm system 34 Anti-theft system 29

Anti-trapping mechanism glass sunroof, electric 37 windows 35 Approved axle loads, refer to

Weights 201 Approved gross vehicle

weight, refer to Weights 201 Armrest, refer to Center

armrest 96 Arrival time computer 66 destination guidance 125 "Arrow display" in

navigation 126 Ashtray 98 Assist, refer to BMW

Assist 160 Assistance systems, refer to

Dynamic Stability Control DSC 78

Assistance window 20 AUC Automatic recirculated-

air control 91 Audio 134 controls 134 switching on/off 134 tone control 135 volume 135 "Audio Aux" 134 Audio device, external 97 "Audio" tone settings 135 "Auto. headlamps" 85 Automatic air distribution 90 air flow rate 90 cruise control 55, 57 headlamp control 85 service notification 161 storing of stations 139 Automatic climate control 89 automatic air distribution 90 settings via iDrive 90 Automatic curb monitor 44

R e

fe re

n ce

207

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

"Automatic programs" with automatic climate control 91

Automatic recirculated-air control AUC 91

Automatic station search 139 Automatic transmission with

Steptronic 51 interlock 51, 52 overriding selector lever

lock 53 shiftlock 52 sport program 52 towing away 195 tow-starting 195 AUTO program for automatic

climate control 90 "Autostore"

on the radio 140 AUX-IN 149 port 97 Average fuel consumption 66 setting the units 68 Average speed 65 "Avoid ferries" in

navigation 124 Avoid freeways for

navigation 123 "Avoid highways" in

navigation 123 Avoiding unintentional

alarms 35 "Avoid tollroads" in

navigation 124 Axle loads, refer to

Weights 201 "A - Z" 154

B Backrests, refer to Seats 39 Backrest width adjustment 40 Back seats, refer to Rear seats adjusting head restraints 41 Backup lamps replacing bulbs 190 Backup lamps, refer to Tail

lamps 189 Balance, tone control 135

Bar, refer to Tow-starting, towing away 196

Bass, tone control 135 Battery 191 charging 191 disposal 191 jump starting 194 temporary power failure 191 Being towed 195 Belts, refer to Safety belts 43 Belt tensioner, refer to Safety

belts 43 Beverage holders, refer to

Cup holders 98 Black ice, refer to Ice

warning 64 Blower, refer to Air flow

rate 91 BMW Assist 160 enabling 160 services offered 161 "BMW Contact" 164 "BMW Contact

Numbers" 164 BMW Maintenance

System 185 "BMW Service" 162 "BMW Service settings" 161 Bottle holders, refer to Cup

holders 98 Brake assist, refer to Dynamic

Brake Control 78 Brake fluid 184 level too low 184 warning lamp 184 Brake fluid, refer to Service

requirements 69 Brake Force Display 82 Brake hydraulics, refer to

Brakes 184 Brake lamps Brake Force Display 82 replacing bulbs 190 Brake pads, breaking in 106 Brake rotors 108 brakes 106 breaking in 106

Brakes ABS 78 BMW Maintenance

System 185 brake fluid 184 brake pads 184 breaking in 106 handbrake 51 service requirements 69 Brakes, refer to Braking

safely 107 Brake system 106 BMW Maintenance

System 185 brake fluid 184 brake pads 184 breaking in 106 disc brakes 108 Breakdown services, refer to

Roadside Assistance 193 Breaking in the clutch 106 Breaking in the

differential 106 Break-in period 106 "Brightness" 76 Bulb changing, refer to Lamps

and bulbs 187 Button for starting engine 49 Buttons on steering wheel 11

C California Proposition 65

warning 5 "Call" 154 Call accepting 153 displaying accepted 155 ending 154 in absence 155 starting 153 Calling from phone book 154 from Top 8 list 155 redialing 155 Can holders, refer to Cup

holders 98 Capacities 201

E ve

ry th

in g

fr o

m A

-Z

208

Car battery, refer to Vehicle battery 191

Car care, refer to Caring for your vehicle brochure

Car-care products, refer to Caring for your vehicle brochure

"Car Data" 66 Care, refer to Caring for your

vehicle brochure Cargo, securing 109 Cargo loading stowing cargo 109 vehicle 108 Caring for artificial leather,

refer to Caring for your vehicle brochure

Caring for leather, refer to Caring for your vehicle brochure

Caring for light-alloy wheels, refer to Caring for your vehicle brochure

Caring for plastic, refer to Caring for your vehicle brochure

Caring for the carpet, refer to Caring for your vehicle brochure

Caring for the vehicle finish, refer to Caring for your vehicle brochure

Car jack jacking points 191 Car key, refer to Integrated

key/remote control 28 Car phone 152 installation location, refer to

Center armrest 96 refer to Portable phone 152 refer to separate Owner's

Manual Car radio, refer to Radio 138 Car wash 108 also refer to Caring for your

vehicle brochure Catalytic converter, refer to

Hot exhaust system 106 "Categories" 142

CBS Condition Based Service 185

"CD" 134, 145 CD changer 145 controls 134 fast forward/reverse 147 installation location 147 playing a track 146 random order 147 repeating a track 146 selecting a CD 145 selecting a track 146 switching on/off 134 tone control 135 volume 135 CD player 145 controls 134 fast forward/reverse 147 playing a track 146 random order 147 repeating a track 146 selecting a track 146 switching on/off 134 tone control 135 volume 135 Center armrest 96 Center brake lamp replacing bulbs 190 Center console, refer to

Around the center console 14

"Central locking" 30 Central locking from inside 32 from outside 29 Central locking system 29 Changing bulbs 187 Changing the language on the

Control Display 76 Changing the measurement

units on the Control Display 68

Changing wheels 191 Chassis number, refer to

Engine compartment 181 Check Control 73 "Check Control

messages" 75 Check Gas Cap 168

Checking the air pressure, refer to Tire inflation pressure 170

Child-restraint fixing system LATCH 48

Child-restraint systems 46 Child-safety lock 48 Child seats 46 Chrome parts, care, refer to

Caring for your vehicle brochure

Cigarette lighter 99 socket 99 Cleaning, refer to Caring for

your vehicle brochure Cleaning headlamps 54 washer fluid 55 "Climate" 90 Clock 64 12h/24h mode 72 setting time 71 Closing from inside 32 from outside 30 Clothes hooks 97 Cold start, refer to Starting the

engine 49 Combined instrument, refer to

Instrument cluster 12 Comfort area, refer to Around

the center console 14 "Communication" 153 "Communication

settings" 160 Compact disc, refer to CD changer 145 CD player 145 Compact wheel inflation pressure

172, 173, 174, 175 Compartment for remote

control, refer to Ignition lock 49

Compass 94 Computer 65 displays on Control

Display 66 hour signal 72 Computer, refer to iDrive 16

R e

fe re

n ce

209

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

"Concert hall" tone settings 136

Condensation, refer to When the vehicle is parked 108

Configuring settings, refer to Personal Profile 29

Confirmation signals for locking/unlocking of the vehicle 31

Connecting vacuum cleaner, refer to Connecting electrical appliances 99

Consumption display average consumption 66 Consumption indicator Energy Control 64 "Continue guidance to

destination?" 126 Control Center, refer to

iDrive 16 Control Display, refer to

iDrive 16 Controller, refer to iDrive 16 Controls and displays 10 Convenience operation windows 30 Convenience start, refer to

Starting the engine 49 Coolant 183 adding 183 checking level 183 Cooling, maximum 90 Cooling fluid, refer to

Coolant 183 Country of destination for

navigation 116 Courtesy lamps 87 Cruise control 55 active 57 malfunction 57 Cruising range 65 Cup holders 98 Curb weight, refer to

Weights 201 Current fuel consumption 64 "Current position" 129

Current position displaying 129 entering 121 storing 121 "Customer

Relations" 162, 164

D Dashboard, refer to

Cockpit 10 Dashboard lighting, refer to

Instrument lighting 87 Data 200 capacities 201 dimensions 200 engine 200 weights 201 "Date" 73 Date setting 72 setting format 73 "Date format" 73 Daytime driving lamps 86 DBC Dynamic Brake

Control 78 Deactivating front passenger

airbags 83 Deadlocking, refer to

Locking 30 Decommissioning the vehicle refer to Caring for your

vehicle brochure Defect fuel filler door 168 glass sunroof 37 Defogging windows 91 Defroster rear window 92 Defrosting windows 91 Defrosting windows and

removing condensation 91 Defrost position, refer to

Defrosting windows 91 "Delete address book" in

navigation 122 "Delete all numbers" on the

portable phone 156

"Delete data" in navigation 122

"Delete" for portable phone 156

Destination address deleting 122 entering 115 Destination for navigation entry 115 navigation list 120 selecting from address

book 121 selecting using

information 119 storing 121 Destination guidance 125 canceling voice

instructions 45 changing specified

route 123 displaying routes 126 distance and arrival 125 interrupting 125 starting 125 terminating/continuing 125 voice instructions 127 volume of voice

instructions 128 Destination list for navigation

system 120 Destinations recently driven

to 120 "Dial" for portable phone 153 "Dial number" 154 Digital clock 64 Digital compass 94 Dimensions 200 Directional indicators, refer to

Turn signals 53 Direction instructions, refer to

Voice instructions 127 Directory, refer to Phone

book 154 Directory for navigation, refer

to Address book 121 Displacement, refer to Engine

data 200 Display, refer to iDrive

controls 16

E ve

ry th

in g

fr o

m A

-Z

210

Display lighting, refer to Instrument lighting 87

"Display off" 21 Displays, refer to Instrument

cluster 12 Displays and controls 10 "Display settings" 72 Disposal of coolant 183 vehicle battery 191 Distance control, refer to

Active cruise control 57 Distance remaining to service,

refer to Service requirements 69

"Distance to dest." 66 Distance warning, refer to

PDC Park Distance Control 77

Door key, refer to Integrated key/remote control 28

Door lock 31 Door locking, confirmation

signals 31 "Door locks" 30 Doors, emergency

operation 31 DOT Quality Grades 176 Draft-free ventilation 92 Drinks holders, refer to Cup

holders 98 Drive-off assistant 80 Driving lamps, refer to Parking

lamps/low beams 85 Driving notes 106 Driving route, refer to

Displaying route 126 Driving stability control

systems 78 Driving through water 107 Driving tips, refer to Driving

notes 106 Dry air, refer to Cooling

function 92 DSC Dynamic Stability

Control 78 indicator lamps 79

DTC Dynamic Traction Control 79

indicator lamps 79 DVD for navigation 114 Dynamic Stability Control

DSC indicator lamps 79 Dynamic Traction Control

DTC indicator lamps 79

E EBV Electronic brake-force

distribution 78 Eject button, refer to Buttons

on the CD player 134 Electrical malfunction door lock 31 fuel filler door 168 glass sunroof 37 Electric seat adjustment 39 Electronic brake-force

distribution 78 Electronic oil level check 181 Emergency call 193 Emergency operation, refer to

Manual operation door lock 31 fuel filler door 168 glass sunroof 37 transmission lock, automatic

transmission 53 Emergency release of luggage

compartment lid from luggage compartment's interior 33

Emergency services, refer to Roadside Assistance 193

Emissions test, refer to Service requirements 69

"Enable services" 161 "End call" 154 Energy-conscious driving,

refer to Energy Control 64 Energy Control 64

Engine breaking in 106 data 200 speed 200 starting 49 switching off 50 Engine compartment 181 Engine coolant, refer to

Coolant 183 Engine oil adding 183 BMW Maintenance

System 185 checking level 181 intervals between changes,

refer to Service requirements 69

"Engine oil level" 182 Engine output, refer to Engine

data 200 Engine speed 200 Engine starting, refer to

Starting the engine 49 "Enter address" 116 Entering destination 116 Entering the address 115 Entering the intersection 117 "Entertainment" 134 "Entertainment settings" 135 Entry map for destination 118 "Equalizer", refer to Tone

control 136 Error messages, refer to

Check Control 73 "ESN" 142 ESP Electronic Stability

Program, refer to DSC Dynamic Stability Control 78

Event data recorders 186 Exhaust system, refer to Hot

exhaust system 106 Exterior mirrors 43 adjusting 43 automatic dimming

feature 107 automatic heating 44 External audio device 97, 149

R e

fe re

n ce

211

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Eyes for tow-starting and towing

away 195 for tying down loads 109

F Fader, tone control 135 Failure messages, refer to

Check Control 73 Failure of an electrical

consumer 192 False alarm, refer to Avoiding

unintentional alarms 35 Fastening safety belts, refer to

Safety belts 43 Fastest route for

navigation 123 Fast forward CD changer 147 CD player 147 "Fast route" in navigation 123 Filter refer to Microfilter/activated-

charcoal filter for automatic climate control 92

First-aid kit 193 Fixture for remote control,

refer to Ignition lock 49 Flashlight, refer to

Rechargeable flashlight 96 Flash when locking/

unlocking 31 Flat Run-Flat Tires 178 Flat Tire Monitor snow chains 179 Flat Tire Monitor FTM 80 indicating a flat tire 81 initializing the system 80 malfunction 81 system limits 80 Flat tires, refer to Tire

condition 177 "FM", waveband 134, 138 FM, waveband 138 Fog lamps 87 indicator lamp 13, 87

Footbrake, refer to Braking safely 107

Footwell lamps 87 Front airbags 82 Front seat adjustment 39 "FTM" 81 FTM, refer to Flat Tire

Monitor 80 Fuel 168 display 65 high-quality brands 168 quality 168 specifications 168 tank capacity 201 Fuel clock, refer to Fuel

gauge 65 Fuel consumption, refer to

Average fuel consumption 66

Fuel display, refer to Fuel gauge 65

Fuel filler door 168 releasing in the event of

electrical malfunction 168 Fuses 192

G Garage door opener, refer to

Integrated universal remote control 93

Gasoline, refer to Required fuel 168

Gasoline display, refer to Fuel gauge 65

Gasoline engine, checking oil level 181

Gear indicator, for automatic transmission 51

Gearshift lever automatic transmission with

Steptronic 52 manual transmission 51 Gearshifts with automatic

transmission 52 with manual transmission 51 General driving notes 106

Glass sunroof, electric 36 anti-trapping mechanism 37 closing after electrical

malfunction 37 convenient operation 30, 31 opening, closing 36 raising 36 remote control 30 Glove compartment 96 rechargeable flashlight 96 GPS navigation, refer to

Navigation system 114 Grills 89 Gross vehicle weight, refer to

Weights 201

H Halogen lamps replacing bulbs 188 Handbrake 51 indicator lamp 51 Hand lamp, refer to

Rechargeable flashlight 96 Hands-free system 14, 152 Hazard warning flashers 14 Head airbags 82 Headlamp control,

automatic 85 Headlamp cover 188 Headlamp flasher 53 indicator lamp 11, 13 Headlamps care, refer to Caring for your

vehicle brochure replacing bulbs 188 Head restraints 40 sitting safely 38 Heated mirrors 44 rear window 92 seats 41 Heating mirrors 44 seats 41 Heating while at a standstill,

refer to Using residual heat 91

E ve

ry th

in g

fr o

m A

-Z

212

Heavy loads, refer to Stowing cargo 109

Height, refer to Dimensions 200

Height adjustment seats 39 steering wheel 44 High beams 86 indicator lamp 13 replacing bulbs 188 High water, refer to Driving

through water 107 Hills 107 Holders for cups 98 "Home address" in

navigation 123 Hood 180 Horn 10 Hot exhaust system 106 "Hour memo" 72 "House number" in

destination entry 117 Hydraulic brake assist, refer to

Dynamic Brake Control 78 Hydroplaning 107

I Ice warning 64 iDrive 16 adjusting brightness 76 assistance window 20 automatic climate control 90 changing language 76 confirming a selection or

entry 19 date and time, setting 72 displays, menus 17 lists 19 menu guidance 17 operating principle 16 selecting a menu item 19 status information 20 switching menu pages 19 symbols 18 Ignition 49 switched off 49 switched on 49

Ignition key, refer to Integrated key/remote control 28

Ignition key position 1, refer to Radio readiness 49

Ignition key position 2, refer to Ignition on 49

Ignition lock 49 Indicator and warning

lamps 13 Individual air distribution 90 Individually programmable

buttons on steering wheel 45

Individual settings, refer to Personal Profile 29

Information on another location 119 on country 119 on current position 119 on destination location 119 "Information" in

navigation 119 "Information on

destination" 120 "Input map" 118 Installation location CD changer 147 Instructions for navigation

system, refer to Voice instructions 127

Instrument cluster 12 Instrument lighting 87 Integrated key 28 Integrated universal remote

control 93 Interesting destination for

navigation 119 "Interim time" 76 Interior lamps 87 remote control 30 Interior motion sensor 35 Interior rearview mirror 44 automatic dimming

feature 107 Interior rearview mirror with

digital compass 94 Interlock 52

Intermittent mode of the wipers 54

J Jacking points 191 Joystick, refer to iDrive 16 Jumpering, refer to Jump

starting 194 Jump starting 194

K Key, refer to Integrated key/

remote control 28 Key Memory, refer to Personal

Profile 29 "Keypad" 156 Kick-down 52 Knock control 168

L Lamps, refer to Parking lamps/

low beams 85 Lamps and bulbs, replacing

bulbs 187 "Languages" in

navigation 128 "Languages"on the control

display 76 Lap-and-shoulder safety

belt 43 Lashing eyes, refer to

Securing cargo 109 Last destinations, refer to

Destination list 120 "Last seat pos." 42 LATCH child-restraint fixing

system 48 LEDs light-emitting

diodes 191 Length, refer to

Dimensions 200 License plate lamp, replacing

bulbs 190 Light-emitting diodes

LEDs 191 Lighter 99

R e

fe re

n ce

213

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

"Lighting" 85, 86 Lighting instruments 87 lamps and bulbs 187 of the vehicle, refer to

Lamps 85 Light switch 85 "Limit" 75 Limit, refer to Speed limit 75 Loading securing cargo 109 Load securing equipment,

refer to Securing cargo 109 Location drive for navigation DVD and

audio CD 114 Lock buttons in the doors,

refer to Locking 32 Locking adjusting confirmation

signal 31 from inside 32 from outside 30 Locking and unlocking doors from inside 32 from outside 30 "LOGIC7", refer to Tone

control 136 Low beams 85 automatic 85 replacing bulbs 188 Lower back support, refer to

Lumbar support 39 Luggage compartment capacity 201 lamp 87 lid 32 opening from inside 33 opening from outside 33 volume 201 Luggage compartment lid 32 locking or unlocking

separately 33 opening and closing 33 opening from inside 33 opening from outside 33 unlocking with remote

control 30

Luggage compartment net, refer to Securing cargo 109

Luggage rack, refer to Roof- mounted luggage rack 109

Lumbar support 39 LW, waveband 138

M M+S tires, refer to Winter

tires 179 Maintenance, refer to Service

Booklet Maintenance system 185 Malfunction warnings, refer to

Check Control 73 Manual mode of automatic

transmission 52 "Manual"

on the radio 139 Manual operation door lock 31 glass sunroof 37 transmission lock, automatic

transmission 53 Manual release fuel filler door 168 Manual transmission 51 Map changing scale 127 destination entry 118 "Map direction of travel" 127 "Map facing north" 127 Master key, refer to Integrated

key/remote control 28 Maximum cooling 90 Maximum speed for winter tires 179 Menus, refer to iDrive 16 Microfilter BMW Maintenance

System 185 for automatic climate

control 92 Microfilter/activated-charcoal

filter BMW Maintenance

System 185

Microphone for hands-free system 152 Microphone for telephone 14 Mirror dimming feature 107 Mirrors 43 automatic curb monitor 44 exterior mirrors 43 heating 44 interior rearview mirror 44 "Missed calls" 155 Missed calls 155 Modifications, technical, refer

to For your own safety 5 Monitor, refer to iDrive

controls 16 Monitoring system for tire

pressures, refer to Flat Tire Monitor 80

"Monitor on / off" 45 Most recent portable phone

numbers 155 Multifunction switch refer to Turn signals/

headlamp flasher 53 refer to Wiper system 54 Music track finding 146 "Mute on / off" 45

N "Navigation" 115 Navigation address home address 122 Navigation destination manual entry 115 selecting via map 118 Navigation drive, location 114 Navigation DVD 114

E ve

ry th

in g

fr o

m A

-Z

214

Navigation system 114 address book 121 destination entry 115 destination guidance in

assistance window 114 destination list 120 displaying current

position 129 entering a destination

manually 115 last destinations 120 opening 115 route display 126 route list 127 searching for a special

destination 119 selecting destination using

information 119 selecting destination via

map 118 selecting route criteria 123 starting destination

guidance 125 switching off, refer to

Terminating/continuing destination guidance 125

terminating/continuing destination guidance 125

voice instructions 127 volume adjustment 128 "Navigation voice

instructions" via buttons on the steering wheel 45

Neck support, refer to Head restraints 40

Nets, refer to Storage compartments 97

"New address" in navigation 121

"New destination" 115, 118 "New route" 129 New tires 178 "Next entertainment

source" 45 North-facing map 126 Nose weight 201 Nozzles 89 Nozzles, refer to Windshield

washer nozzles 54

Number of cylinders, refer to Engine data 200

O Octane ratings, refer to Fuel

specifications 168 Odometer 64 Oil capacity 201 Oil, refer to Engine oil 181 Oil consumption 181 Oil level 181 Old batteries, refer to

Disposal 191 "On a new destination" in

navigation 119 "Onboard info" 66 Onboard tool kit 187 "On destination" 119 "On location" 119 Opening and closing from inside 32 from outside 30 using the door lock 31 via the remote control 30 Opening and unlocking from the inside 32 Operation by voice for

portable phone 156 adjusting volume 158 canceling 157 correcting phone

number 158 dialing phone number 158 placing a call 158 redialing 159 voice commands 157 voice phone book 158 Orientation menu, refer to

Start menu 17 Outlets refer to Ventilation 92 Output, refer to Engine

data 200 Outside-air mode automatic climate control 91

Outside-temperature display 64

changing units of measure 68

in computer 68 Overriding selector lever

lock 53

P Panic mode 30 Parking vehicle 50 Parking aid, refer to PDC Park

Distance Control 77 Parking brake, refer to

Handbrake 51 Parking lamps/low beams 85 replacing bulbs 189 Parts and accessories, refer to

The individual vehicle 5 Passenger-side mirror tilt

function 44 "Pathway lighting" 86 Pathway lighting 86 "PDC" 78 "PDC display on" 78 PDC Park Distance Control 77 Personal Profile 29 Phone book 153 Phone numbers deleting from phone

book 155 dialing 153 most recent numbers 155 selecting in phone book 155 Top 8 155 Placing a call, refer to

telephone owner's manual "Play"

on the radio 143 Pollen refer to Microfilter/activated-

charcoal filter for automatic climate control 92

R e

fe re

n ce

215

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Portable phone accepted calls 155 adjusting volume 153 calling 153 ending call 154 hands-free system 152 missed calls 155 operation via iDrive 153 phone book 154 redialing 155 Top 8 155 touch tone dialing 156 Portable phone, installation

location, refer to Center armrest 96

Portable phone, refer to the separate Owner's Manual

Portable phone in the vehicle 106

Portable phones, use inside the car, refer to Portable phone in the vehicle 106

Position displaying 129 storing 121 Power windows 35 safety switch 36 Power windows, refer to

Windows 35 "Presets", calling up on

radio 138 "Presets" on the radio 142 Pressure, tires 170 Pressure monitoring, tires 80 Flat Tire Monitor 80 Protection function, refer to

Anti-trapping mechanism glass sunroof, electric 37 windows 35 Puncture Flat Tire Monitor 80

R Radio autostore 139 controls 134 sampling stations 139 satellite radio 141 selecting the frequency

manually 139 selecting the

waveband 134, 138 station search 139 station selection 138 station with the best

reception 139 storing stations 140 switching on/off 134 tone control 135 volume 135 Weather Band 141 Radio key, refer to Integrated

key/Remote control 28 Radio position, refer to Radio

readiness 49 Radio readiness 49 switched off 49 switched on 49 Rain sensor 54 "Random", random play 147 Reading lamps 88 Rear lamps, refer to Tail

lamps 189 replacing bulbs 190 Rear seats adjusting head restraints 41 Rear turn signals replacing bulbs 190 Rear ventilation 92 Rearview mirror, refer to

Mirrors 43 Rear window defroster 92 Rear window roller blind, refer

to Roller sun blinds 95 Rear window safety switch 36 "Received calls" 155 Receiving level of portable

phone, refer to Status information 20

Reception radio stations 141 Rechargeable flashlight 96 Recirculated-air mode 91 Recirculation of air, refer to

Recirculated-air mode 91 Reclining seat, refer to

Backrest 39 Recording times, refer to

Stopwatch 75 "Redial" for portable

phone 155 Refueling 168 Releasing hood 180 Remaining distance, refer to

Cruising range 65 Remote control 28 garage door opener 93 luggage compartment lid 30 malfunctions 31 service data 185 "Repeat" for audio mode 146 Replacement remote

control 28 Replacing bulbs, refer to

Lamps and bulbs 187 Replacing tires, refer to New

wheels and tires 178 Reporting an accident, refer to

Initiating an emergency call 193

Reporting safety defects 7 Reserve warning, refer to Fuel

gauge 65 Reservoir for washer

systems 55 Reset, refer to Resetting tone

settings 137 "Reset" for stopwatch 76 "Reset" for tone settings 137 Residual heat mode 91 Restraint system for children 46 Restraint systems refer to Safety belts 43 Reverse, fast CD changer 147 CD player 147

E ve

ry th

in g

fr o

m A

-Z

216

Reverse gear automatic transmission with

Steptronic 52 manual transmission 51 Road map 126 "Roadside Assistance" 162 Roadside

Assistance 162, 193 Roadside parking lamps 86 replacing bulbs 189 Roadworthiness test, refer to

Service requirements 69 Roller blind sun blinds 95 Roof load capacity 201 Roof-mounted luggage

rack 109 Rope, refer to Tow-starting,

towing away 196 Rotary/pushbutton, refer to

iDrive 16 Route 123 changing 123 display 126 displaying arrow view 126 displaying map view 126 displaying town 127 list 127 selecting 123 selecting criteria 123 "Route list" in navigation 127 Route map 126 "Route preference",

changing 123 Route selection 123 RSC Runflat System

Component, refer to Run- Flat Tires 178

Runflat System Component RSC, refer to Run-Flat Tires 178

Run-Flat Tires 178 continuing driving with a

damaged tire 81 flat tire 81 new tires 178 replacing tires 178 tire pressures 170 winter tires 179

Runflat Tyres, refer to Run- Flat Tires 178

S Safety-belt height

adjustment 43 Safety belts 43 damage 43 indicator lamp 43 reminder 43 sitting safely 38 Safety systems airbags 82 Antilock Brake System

ABS 78 Dynamic Stability Control

DSC 78 safety belts 43 Safety tires, refer to Run-Flat

Tires 178 Sampling tracks scan 146 Satellite radio 141 enabling 141 selecting channel 142 storing channel 142 "SAT" for radio 134, 142 Scan CD changer 146 CD player 146 radio 139 "Scan", sampling radio

stations 139 "Scan", sampling

tracks on CD 146 Screen, refer to iDrive

controls 16 Seat adjustment electric 39 mechanical 39 Seat belt reminder, refer to

'Fasten safety belts' reminder 43

Seats 39 adjusting the seats 39 heating 41 sitting safely 38 Securing cargo 101

"Select as destination" 120 "Select current speed" 75 Selecting distance for active

cruise control 59 Selecting menu items 19 Selecting new scale for

navigation 127 Selecting the frequency

manually 139 Selection options with

navigation system 123 Selector lever automatic transmission with

Steptronic 52 "Service" 75, 161, 182 Service, refer to Roadside

Assistance 193 Service car, refer to Roadside

Assistance 193 Service data in the remote

control 185 Service Interval Display, refer

to Condition Based Service CBS 185

"Service notification" 161 "Service Request" 162, 164 Service requirement display,

refer to Condition Based Service CBS 185

"Service requirements" 70, 161, 182

Service requirements 69 "Service Status" 161 "Set date" 73 "Set" for audio mode 134 "Set time" 72 Settings clock,12h/24h mode 72 date format 73 "Set tire pressure" 81 Shifting with automatic

transmission with Steptronic 52

Shiftlock, refer to Changing selector lever positions 52

Short commands of voice command system 202

Shortest route in navigation, refer to Selecting route 123

R e

fe re

n ce

217

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

"Short route" in navigation 123

"Show current position" 119 "Show destination

position" 119 Shuffled, refer to Random CD changer 147 CD player 147 Side airbags 82 Side-mounted turn signals replacing bulbs 189 Side window blind, refer to

Roller sun blinds 95 Side windows, refer to

Windows 35 Signal horn, refer to Horn 10 Sitting safely 38 airbags 38 safety belt 38 with head restraint 38 Ski bag 101 Ski sack, refer to Ski bag 101 Sliding/tilt sunroof, refer to

Glass sunroof, electric 36 Slot for remote control 49 Smokers' package, refer to

Ashtray 99 Socket, refer to Connecting

electrical appliances 99 Sound output for

entertainment on/off 134 Spare fuses 192 Spare fuses, refer to

Fuses 192 Spark plugs, refer to Service

requirements 69 Speed for winter tires 179 Speed-dependent

volume 135 Speed limit 75 setting 75 Speed limit warning, refer to

Speed limit 75 Speedometer 12 "Speed volume" 136 Sports seat 40

Stability control, refer to Driving stability control systems 78

Start/stop button 49 starting the engine 49 switching off the engine 50 "Start guidance" 118, 125 Starting difficulties, temperature 50 Starting, refer to Starting the

engine 49 Starting assistance, refer to

Jump starting 194 Starting the engine start/stop button 49 Start menu 17 "State / Province" in

destination entry 116 Station, refer to Radio 138 "Status" 70 Status of this Owner's Manual

at time of printing 5 Steering wheel 44 adjustment 44 buttons on steering

wheel 11 freely programmable

buttons 45 lock 49 "Steering wheel buttons" 45 Steering with variable ratio,

refer to Active steering 81 Steptronic, refer to Automatic

transmission with Steptronic 51

"Stopwatch" 76 Stopwatch 75 Storage compartment permissible load 97 Storage compartments 97 Storage package 97 "Store in address book" in

navigation 121 "Store" on the radio 140, 143 Storing current position 121 Storing radio stations 140 Storing tires 179 Stowage, refer to Storage

compartments 97

"Street" in destination entry 117

Summer tires, refer to Wheels and tires 170

Sun blinds 95 SW, waveband 138 Switches, refer to Cockpit 10 Switching Control Display on/

off 21 Switching navigation voice

instructions on/off 127 Switching off engine 50 Switching off the engine start/stop button 49 Switching on audio 134 CD changer 134 CD player 134 radio 134 Switching on the hour

signal 72 Switching the cooling function

on and off 92 Symbols 4 Control Display 20

T Tachometer 64 Tail lamps 189 replacing bulbs 190 Tank contents, refer to

Capacities 201 Technical data 200 Telematik, refer to

TeleService, BMW Assist 160

Telephone, refer to Portable phone 152

Telephone, refer to separate Owner's Manual

"Telephone list" 45 TeleService 160 enabling 160 services offered 161

E ve

ry th

in g

fr o

m A

-Z

218

Temperature display ice warning 64 outside temperature 64 setting the units 68 "Terminate services" 163 "Text language" 76 "Theater" tone settings 136 Thigh support 40 Third brake lamp, refer to

Center brake lamp 190 Tilt alarm sensor 35 Tilt function, passenger-side

mirror 44 "Time" 72 "Time format" 72 Tire inflation pressures 170 Tire pressure loss 81 Tire pressure monitoring,

refer to Flat Tire Monitor 80 Tire puncture, refer to Flat Tire

Monitor 81 Tire Quality Grading 176 Tires age 176, 178 breaking in 106 changing, refer to Changing

wheels 191 condition 177 damage 177 inflation pressure 170 minimum tread depth 177 new tires 178 pressure monitoring, refer to

Flat Tire Monitor 80 puncture 81 Run-Flat Tires 178 size 176 wear indicators, refer to

Minimum tread depth 177 winter tires 179 "Tone" 135 Tone in audio mode adjusting 135 middle setting 137 Tools, refer to Onboard tool

kit 187 "Top 8" for portable

phone 155

Torque 200 Touch tone dialing 156 Tow bar 196 Tow fittings 195 Tow fittings for tow-starting

and towing away 195 Towing 195 methods 196 Towing away car with automatic

transmission 195 "Town / City" in destination

entry 116 Tow rope 196 Tow-starting 195 Tracks random play sequence 147 Track width, refer to

Dimensions 200 Traction-assist feature, refer

to DSC 78 Traction control, refer to DSC

Dynamic Stability Control 78

Trailer towing towing loads and gross

weight 201 Transmission automatic transmission with

Steptronic 51 manual transmission 51 Transporting children

safely 46 Transport securing device,

refer to Securing cargo 109 Tread depth, refer to Minimum

tire tread 177 Treble, tone control 135 "Trip computer" 66 Trip computer 66 Trip-distance counter, refer to

Trip odometer 64 "Triple turn signal

activation" 53, 85 Trip odometer 64 Trunk lid, refer to Luggage

compartment lid 32 Trunk lights, refer to Luggage

compartment lamp 87

Turning circle, refer to Dimensions 200

Turn signals 53 indicator lamp 12 replacing bulbs 189 Tying down loads, refer to

Cargo loading 109

U Underbody protection, refer to

Caring for your vehicle brochure

Uniform Tire Quality Grading/ UTQR 176

"Units" 68 Units average consumption 68 temperature 68 Universal garage door opener,

refer to Integrated universal remote control 93

Universal remote control 93 "Unlock button" 30 Unlocking from inside 32 from outside 30 "Update services" 163

V Vehicle battery 191 breaking in 106 care, refer to Caring for your

vehicle brochure cargo loading 108 dimensions 200 Identification Number, refer

to Engine compartment 181 parking 50 washing, refer to Caring for

your vehicle brochure weight 201 Vehicle jack 191 Vehicle position, refer to

Displaying current position 129

"Vehicle settings" 80

R e

fe re

n ce

219

A t

a g

la n

ce C

o n

tr o

ls D

ri vi

n g

t ip

s C

om m

un ic

at io

ns N

av ig

at io

n E

n te

rt a

in m

e n

t M

o b

il it

y

Ventilation 92 draft-free 92 in the rear 92 Vents, refer to Ventilation 92 "Vent settings" 90 Voice command overview 22 Voice input short commands 202 Voice instructions for

navigation system 127 muting 45 repeating 45, 128 switching on/off 127 volume 128 Voice phone book 158 Volume 134 audio sources 134 portable phone 153 voice instructions 128 Volume control speed-dependent

adjustment 135 Volume of luggage

compartment 201

W Warning and indicator

lamps 13 Warning messages, refer to

Check Control 73 Warning triangle 194 Washer fluid 55 content of the reservoir 55 Washer fluid reservoir 55 Washing the car, refer to

Caring for your vehicle brochure

Waste tray, refer to Ashtray 98 Water on roads, refer to

Driving through water 107 Waveband 138 "WB" 134, 141 Wear indicators in tires, refer

to Minimum tread depth 177 Weights 201 Wheelbase, refer to

Dimensions 200

Wheels, new 178 Wheels and tires 170 Width, refer to

Dimensions 200 Windows 35 anti-trapping mechanism 35 convenience operation 30 opening, closing 35 safety switch 36 Windshield cleaning 54 defrosting and removing

condensation 91 Windshield defrosting, refer to

Defrosting windows 91 Windshield washer fluid

reservoir, refer to Washer fluid 55

Windshield washer system 54 washer fluid 55 washer nozzles 54 Windshield wiper blades,

changing 187 Windshield wipers, refer to

Wiper system 54 Winter tires 179 setting speed limit 75 storage 179 Wiper blade replacement 187 Wiper system 54 "With highways" for

navigation 123 Word-matching principle for

navigation 124 Wrench/screwdriver, refer to

Onboard tool kit 187

X Xenon lamps replacing bulbs 187

Refueling So that you always have access to the data you need when refueling, you are recommended to enter the relevant figures for your car in the table provided below. Consult the index for indi- vidual specifications.

Fuel

Engine oil

Do not add engine oil until the corresponding warning lamp in the instrument cluster lights up, refer to page 183.

Tire inflation pressures

Designation

Please enter your preferred fuel here.

Quality

Summer tires Front Rear

Winter tires Front Rear

Up to 4 persons

5 persons or 4 plus luggage

01 41

0 15

9 25

9 u

e iD

riv e

*BL0159259009*

The Ultimate Driving Machine

More about BMW

bmwusa.com

Manualsnet FAQs

If you want to find out how the 3 Series BMW works, you can view and download the BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for BMW 3 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a BMW 3 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW 330i iDrive Sedan 3 Series 2006 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.