BMW 128i Convertible 1 Series 2009 Owner's Manual PDF
en
Summary of Content for BMW 128i Convertible 1 Series 2009 Owner's Manual PDF
The Ultimate Driving Machine
Owner's Manual for Vehicle
128i 135i
Owner's Manual for Vehicle Congratulations, and thank you for choosing a BMW.
Thorough familiarity with your vehicle will provide you with enhanced control and security when you drive it. We therefore have this request:
Please take the time to read this Owner's Manual and familiarize yourself with the information that we have compiled for you before starting off in your new vehicle. It contains important data and instructions intended to assist you in gaining maximum use and satisfaction from your BMW's unique range of technical fea- tures. The manual also contains information on maintenance designed to enhance operating safety and contribute to main- taining the value of your BMW throughout an extended service life.
This manual is supplemented by a Service and Warranty Informa- tion Booklet for US models or a Warranty and Service Guide Booklet for Canadian models.
We wish you an enjoyable driving experience.
BMW AG
2008 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English VIII/08 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
Contents
The fastest way to find information on a partic- ular topic or item is by using the index beginning on page 152.
Using this Owner's Manual 4 Notes 6 Reporting safety defects
At a glance 10 Cockpit
Controls 18 Opening and closing 35 Adjustments 44 Transporting children safely 47 Driving 56 Everything under control 64 Technology for driving comfort and
safety 74 Lamps 79 Climate 85 Practical interior accessories
Driving tips 96 Things to remember when driving
Mobility 104 Refueling 106 Wheels and tires 114 Under the hood 118 Maintenance 120 Care 124 Replacing components 130 Giving and receiving assistance 134 Indicator and warning lamps
Reference 146 Technical data 152 Everything from A to Z
N o
te s
4
Notes
Using this Owner's Manual We have tried to make all the information in this Owner's Manual easy to find. The fastest way to find specific topics is to refer to the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter.
Should you sell your BMW some day, please remember to hand over the Owner's Manual as well; it is an important component of your vehi- cle.
Additional sources of information Should you have any other questions, your BMW center will be glad to advise you at any time.
Information on BMW, e.g. on technical aspects, can also be found on the Internet at www.bmwusa.com.
Symbols used Indicates precautions that must be fol- lowed precisely in order to avoid the pos-
sibility of personal injury and serious damage to the vehicle.
Indicates information that will assist you in gaining the optimum benefit from your
vehicle and enable you to care more effectively for your vehicle.
Refers to measures that can be taken to help protect the environment.
< Marks the end of a specific item of informa- tion.
* Indicates special equipment, country-spe- cific equipment and optional accessories, as well as equipment and functions not yet avail- able at the time of printing.
Symbols on vehicle components Indicates that you should consult the rel- evant section of this Owner's Manual for
information on a particular part or assembly.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
5
The individual vehicle When you ordered your BMW, you chose vari- ous items of equipment. This Owner's Manual describes the entire array of options and equip- ment available with a specific BMW model.
Please bear in mind that the manual may con- tain information on accessories and equipment that you have not specified for your own vehicle. Sections describing options and special equip- ment are marked by asterisks * to assist you in identifying possible differences between the descriptions in this manual and your own vehi- cle's equipment.
If equipment in your BMW is not described in this Owner's Manual, please refer to the accom- panying Supplementary Owner's Manuals.
Editorial notice BMW pursues a policy of continuous, ongoing development that is conceived to ensure that our vehicles continue to embody the highest quality and safety standards combined with advanced, state-of-the-art technology. For this reason, it is possible in exceptional cases that features described in this Owner's Manual could differ from those on your vehicle.
For your own safety
Maintenance and repair Advanced technology, e.g. the use of modern materials and powerful electron-
ics, requires specially adapted maintenance and repair methods. You should therefore have the corresponding work on your vehicle per- formed only by your BMW center or at a work- shop that works according to BMW repair pro- cedures with correspondingly trained personnel. If this work is not carried out prop- erly, there is a danger of subsequent damage and related safety hazards.<
Parts and accessories For your own safety, use genuine parts and accessories approved by BMW.
When you purchase accessories tested and approved by BMW and Original BMW Parts, you simultaneously acquire the assurance that they have been thoroughly tested by BMW to ensure optimum performance when installed on your vehicle.
BMW warrants these parts to be free from defects in material and workmanship.
BMW will not accept any liability for damage resulting from installation of parts and accesso- ries not approved by BMW.
BMW cannot test every product made by other manufacturers to verify if it can be used on a BMW safely and without risk to either the vehi- cle, its operation, or its occupants.
Original BMW Parts, BMW Accessories and other products approved by BMW, together with professional advice on using these items, are available from all BMW centers.
Installation and operation of non-BMW approved accessories such as alarms, radios, amplifiers, radar detectors, wheels, suspension components, brake dust shields, telephones, including operation of any mobile phone from within the vehicle without using an externally mounted antenna, or transceiver equipment, for instance, CBs, walkie-talkies, ham radio or sim- ilar accessories, may cause extensive damage
N o
te s
6
to the vehicle, compromise its safety, interfere with the vehicle's electrical system or affect the validity of the BMW Limited Warranty. See your BMW center for additional information.<
Maintenance, replacement, or repair of the emission control devices and sys-
tems may be performed by any automotive repair establishment or individual using any cer- tified automotive part.<
California Proposition 65 warning California law requires us to issue the following warning:
Engine exhaust and a wide variety of automobile components and parts,
including components found in the interior fur- nishings in a vehicle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Battery posts, terminals and related accesso- ries contain lead and lead compounds. Wash your hands after handling.
Used engine oil contains chemicals that have caused cancer in laboratory animals. Always protect your skin by washing thoroughly with soap and water.<
Service and warranty We recommend that you read this publication thoroughly.
Your BMW is covered by the following warran- ties:
> New Vehicle Limited Warranty
> Rust Perforation Limited Warranty
> Federal Emissions System Defect Warranty
> Federal Emissions Performance Warranty
> California Emission Control System Limited Warranty
Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
Reporting safety defects
For US customers The following only applies to vehicles owned and operated in the US.
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration, NHTSA, in addition to notifying BMW of North America, LLC, P.O. Box 1227, Westwood, New Jersey 07675-1227, Telephone 1-800-831- 1117.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or BMW of North America, LLC.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Adminis- trator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
7
For Canadian customers Canadian customers who wish to report a safety-related defect to Transport Canada, Defect Investigations and Recalls, may call 1-800-333-0510 toll-free from anywhere in Canada or 1-613-993-9851 from the Ottawa region and from other countries, or contact Transport Canada by mail at: Transport Can- ada, ASFAD, Place de Ville, Tower C, 330 Sparks Street, Ottawa, ON, K1A 0N5.
You can also obtain other information about motor vehicle safety from http://www.tc.gc.ca
At a glance This overview of buttons, switches and displays is intended to familiarize you with your vehicle's
operating environment. The section will also assist you in becoming acquainted with the
control concepts and options available for operating the various systems.
C o
ck p
it
10
Cockpit
Around the steering wheel: controls and displays
1 Convertible: opening and closing windows jointly 28
2 Convertible: opening and closing rear windows 28
3 Opening and closing front windows 27
4 Folding exterior mirrors in and out* 41
5 Adjusting exterior mirrors, automatic curb monitor* 41
6 Parking lamps 74
Low beams 74
Automatic headlamp control* 74 Adaptive Head Light* 76
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y R
e fe
re n
ce
11
7 Fog lamps* 77
8 Turn signals 51
High beams, headlamp flasher 76
Roadside parking lamps* 76
Computer 57
Settings and information about the vehicle 59
Settings and information about the vehicle 59
Instrument lighting 77
9 Instrument cluster 12
10 Windshield wipers 52
Rain sensor* 53
11 Switching the ignition on/off and starting/stopping the engine 47
12 Ignition lock 47
13 Buttons on the steering wheel
Telephone*:
> Press: accepting and ending a call; starting dialing* of selected phone number; redi- aling if no phone number is selected.
Volume
Voice commands for telephone*
Changing radio station Selecting music track Scrolling through phone book and lists with stored phone numbers
Next entertainment source
Recirculated-air mode 80
14 Steering wheel heating*
15 Horn: the entire surface
16 Adjusting the steering wheel 43
17 Cruise control* 54
18 Releasing the hood 114
19 Opening the luggage compartment lid 23
C o
ck p
it
12
Instrument cluster
1 Speedometer 135i: with fuel gauge
2 Indicator lamps for turn signals
3 Indicator and warning lamps 13
4 Tachometer 56
5 Fuel gauge 57 135i: engine oil temperature 57
6 Display for
> Clock 56
> Outside temperature 56
> Indicator and warning lamps 62
7 Display for
> Position of automatic transmission* 49
> Computer 57
> Date of next scheduled service, and remaining distance to be driven 61
> Odometer and trip odometer 56
> Initializing the Flat Tire Monitor* 66
> Resetting the Tire Pressure Monitor 68
> Checking oil level 115
> Settings and information 59
8 Resetting the trip odometer 56
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y R
e fe
re n
ce
13
Indicator and warning lamps
The concept
Indicator and warning lamps in the display area can light up in a variety of combinations and col- ors.
Some lamps are checked for proper functioning and thus come on briefly when the engine is started or the ignition is switched on.
What to do in case of a malfunction A list of all indicator and warning lamps, as well as notes on possible causes of malfunctions and on how to respond, can be found starting on page 134.
C o
ck p
it
14
Around the center console: controls and displays
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y R
e fe
re n
ce
15
1 Coupe: microphone for telephone* in hands-free mode Convertible: microphone on steering col- umn
2 Reading lamps* 78
3 Coupe: glass roof, electric* 29
4 Interior lamps 77
5 Passenger airbag status lamp 72
6 Dynamic Traction Control DTC 65
7 Hazard warning flashers
8 Central locking system 22
9 Radio, refer to separate Owner's Manual
10 Heating and ventilation, air conditioner* or automatic climate control*
Air distribution for heating 80
Air distribution to the windshield* 82
Air distribution to the upper body area* 82
Air distribution to the footwell* 82
Automatic air distribution and flow rate* 83
Cooling function* 84
Automatic recirculated-air control AUC* 83
Recirculated-air mode 80, 83
Maximum cooling* 82
Residual heat mode* 83
Air flow rate 80, 83
Defrosting windows* 84
Rear window defroster 84
11 Heated seats* 39
Convertible: opening the convert- ible top 31
Convertible: closing the convertible top 31
Controls This chapter is intended to provide you with
information for complete control of your vehicle. All features and accessories that are useful for
driving and your safety, comfort and convenience, are described here.
O p
en in
g a
n d
c lo
si n
g
18
Opening and closing
Remote control
Each remote control contains a rechargeable battery that is automatically recharged when it is in the ignition lock while the car is being driven. Use each remote control at least twice a year for longer road trips in order to maintain the batteries' charge status. In cars with convenient access*, the remote control contains a replace- able battery, refer to page 27.
The settings called up and implemented when the car is unlocked depend on which remote control is used to unlock the car, refer to Per- sonal Profile below.
In addition, information about service require- ments is stored in the remote control, refer to Service data in the remote control, page 118.
Integrated key
Press button 1 to release the key.
The integrated key fits the following locks:
> Driver's door, refer to page 22
> Convertible: glove compartment, refer to page 88
New remote controls Your BMW center can supply new remote con- trols with integrated keys as additional units or as replacements in the event of loss.
Personal Profile
The concept You can set many of your BMW's functions to suit your personal needs and preferences. Without any action on your part, Personal Pro- file ensures that most of these settings are stored for the remote control currently in use. When you unlock the car, the remote control used for the purpose is recognized and the set- tings stored for it are called up and imple- mented.
This means that your personal settings will be activated for you, even if in the meantime your car was used by someone else with another remote control and the corresponding settings. The individual settings are stored for a maxi- mum of four remote controls. They are stored for two remote controls if convenient access* is in use.
Personal Profile settings For more information on specific settings, refer to the specified pages.
> Response of the central locking system when the car is unlocked, refer to page 19
> Automatic locking of the vehicle, refer to page 22
> Automatic call-up* of the driver's seat posi- tion after unlocking, refer to page 39
> Triple turn signal activation, refer to page 52
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
19
> Settings for the display in the instrument cluster:
> 12h/24h format of the clock, refer to page 60
> Date format, refer to page 60
> Units of measure for fuel consumption, distance covered/remaining distances, and temperature, refer to page 60
> Light settings:
> Pathway lighting, refer to page 74
> Daytime running lamps, refer to page 75
> Automatic climate control*: AUTO pro- gram, cooling function and automatic recir- culated-air control activation/deactivation, temperature, air flow rate and distribution, refer to page 82
> Entertainment:
> Audio volume, refer to separate Owner's Manual
> Speed-dependent volume control, refer to separate Owner's Manual
Central locking system
The concept The central locking system functions when the driver's door is closed.
The system simultaneously engages and releases the locks on the following:
> Doors
> Luggage compartment lid
> Fuel filler door
Operating from outside > Via the remote control
> Via the door lock* > In cars with convenient access*, via the
handles on the driver's and front passen- ger's doors
In addition, if the remote control is used, the welcome lamps*, interior lamps and the door's courtesy lamps* are switched on or off. The
alarm system* is also armed or disarmed. For further details on the alarm system*, refer to page 24.
Operating from inside By means of the button for central locking, refer to page 22.
In the event of a sufficiently severe accident, the central locking system unlocks automatically. In addition, the hazard warning flashers and inte- rior lamps come on.
Opening and closing: Using the remote control
Persons or animals in a parked vehicle could lock the doors from the inside. You
should therefore take the remote control with you when you leave the vehicle so that the latter can be opened from outside.<
Unlocking Press the button. The interior lamps, the courtesy lamps* and the welcome lamps come on.
Setting unlocking characteristics You can set whether only the driver's door or the entire vehicle is to be unlocked when the button is pressed for the first time.
For operating principle refer to page 59.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
O p
en in
g a
n d
c lo
si n
g
20
3. Press button 2.
4. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
5. Press button 2.
6. Use button 1 to select:
> Press the button once to unlock only the driver's door and the fuel filler door. Press the button twice to unlock the entire vehicle.
> Press the button once to unlock the entire vehicle.
7. Press button 2. The setting is stored for the remote control currently in use.
Coupe: convenient opening Hold the button down. The windows and the glass roof* are opened.
Convertible: convenient opening* You can open the convertible top using the remote control for convenient access within a range of approx. 13 ft/4 m from the vehicle.
Hold the button down. The windows and the convertible top are opened provided that the doors are closed.
If you continue pressing the button, the win- dows move up.
Watch during the opening process to ensure that no one is injured. Releasing
the button interrupts the opening process.<
Locking Press the button.
Convertible: convenient closing* You can close the convertible top and the win- dows using the remote control for convenient access within a range of approx. 13 ft/4 m from the vehicle.
Hold the button down. The convertible top and the windows are closed.
Watch during the closing process to ensure that no one is injured. Releasing
the button interrupts the closing process.<
Switching on interior lamps While the car is locked: Press the button. You can also use this function to locate your vehicle in parking garages etc.
Unlocking the luggage compartment lid Press the button for a longer period.
The luggage compartment lid opens a short distance, regardless of whether it was locked or unlocked.
The luggage compartment lid swings backward and up when opened. Ensure
that there is sufficient clearance. To avoid locking yourself out by accident, do not place the remote control in the cargo bay. A previously locked luggage compartment lid is locked again after closing. Before and after each trip, check that the lug- gage compartment lid has not been inadvert- ently unlocked.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
21
Confirmation signals You can activate or deactivate the confirmation signals.
For operating principle refer to page 59.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator lever down repeatedly until the desired symbol appears in the display.
> Confirmation signal during unlocking
> Confirmation signal during locking
5. Press button 2.
6. Use button 1 to select:
> The hazard warning flashers light up during unlocking/locking.
> The function is deactivated.
7. Press button 2. The setting is stored.
Malfunctions The remote control may malfunction due to local radio waves. If this occurs, unlock and lock the car at the door lock with the integrated key.
Coupe: in vehicles without an alarm system* or convenient access*, only the driver's door can be unlocked and locked using the integrated key in the door lock.
If the car can no longer be locked with a remote control, the battery in the remote control is dis- charged. Use the remote control on an extended trip to recharge the battery, refer to page 18. The remote control for convenient access contains a battery that may have to be changed, refer to page 27.
For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communications Commission regulations. Operation is gov- erned by the following:
FCC ID: LX8766S LX8766E LX8CAS
Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
> This device must not cause harmful inter- ference, and
> this device must accept any interference received, including interference that may cause undesired operation.
Any unauthorized modifications or changes to these devices could void the
user's authority to operate this equipment.<
O p
en in
g a
n d
c lo
si n
g
22
Opening and closing: Using the door lock
You can set the way in which the car is unlocked, refer to page 19.
Coupe If the vehicle is not equipped with an alarm system* or convenient access*,
only the driver's door is locked via the door lock.<
To lock both doors, the fuel filler door and the luggage compartment lid together:
1. With the doors closed, lock the vehicle using the button for the central locking sys- tem in the interior, refer to page 22.
2. Unlock and open the driver's or front pas- senger's door, refer to page 23.
3. Lock the vehicle.
> Lock the driver's door using the inte- grated key in the door lock, or
> press down the lock button of the front passenger's door and close the door from the outside.
Convenient operation* If the car is equipped with an alarm system* or convenient access*, you can also control the power windows and the glass roof* in the coupe or the convertible top in the convertible via the door lock.
Hold the key in the position for unlocking or locking.
During each closing procedure, and when opening the convertible top, watch the
process and ensure that no one becomes
trapped. Releasing the key stops the opera- tion.<
Manual operation In the event of an electrical malfunction, you can lock and unlock the driver's door by turning the integrated key to the corresponding limit posi- tions in the door lock.
Opening and closing: From inside
This button serves to unlock or lock doors and the luggage compartment lid, but does not acti- vate the anti-theft system. The fuel filler door remains unlocked.
Automatic locking You can also set the situations in which the car locks:
For operating principle refer to page 59.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
23
4. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
5. Press button 2.
6. Use button 1 to select:
> The central locking system automati- cally locks the vehicle after some time if no door has been opened.
> The central locking system automati- cally locks the vehicle as soon as you drive off.
> The central locking system automati- cally locks the vehicle after some time if no door has been opened, or as soon as you drive off.
> The central locking system remains unlocked.
7. Press button 2. The setting is stored for the remote control currently in use.
Unlocking and opening doors > Either unlock the doors together using the
button for the central locking system and then pull the door handle above the armrest or
> pull on the door handle of each door twice: the first time unlocks the door, the second time opens it.
Locking > Use the central locking button to lock all of
the doors simultaneously, or
> press down the safety lock button of a door. To prevent you from being locked out, the open driver's door cannot be locked using the lock button.
Persons or animals in a parked vehicle could lock the doors from the inside. You
should therefore take the remote control with you when you leave the vehicle so that the latter can be opened from outside.<
Luggage compartment lid In order to avoid damage, make sure there is sufficient clearance before opening the
luggage compartment lid.<
Opening from inside
Press the button: the luggage compartment lid opens unless it has been locked.
Opening from outside
Press the button, see arrow, or the button on the remote control for a longer period. The lug-
O p
en in
g a
n d
c lo
si n
g
24
gage compartment lid opens slightly and can be swung upward.
In the event of a malfunction, please con- tact your BMW center or a workshop that
works according to BMW repair procedures with correspondingly trained personnel.<
Locking or unlocking separately
The switch is located in the glove compartment.
1 Locking the luggage compartment lid
2 Unlocking the luggage compartment lid
Locking separately Push the switch in the direction of arrow 1.
The luggage compartment lid is locked and cannot be unlocked using the central locking system.
If you give the remote control without the inte- grated key to someone else while the glove compartment is locked, the luggage compart- ment lid cannot be opened. This is an advan- tage when using valet parking, for example. Locking the glove compartment, refer to page 88.
Unlocking separately Push the switch in the direction of arrow 2.
Emergency release
Pull the lever in the cargo bay. The luggage compartment lid is unlocked.
Closing
The handle recesses on the interior trim of the luggage compartment lid make it easier to pull down.
Make sure that the closing path of the luggage compartment lid is clear, other-
wise injuries may result.<
Alarm system*
The concept The vehicle alarm system responds:
> When a door, the hood or the luggage com- partment lid is opened
> To movements inside the vehicle: interior motion sensor, refer to page 25
> When the car's inclination changes, for instance if an attempt is made to jack it up and steal the wheels or to raise it prior to towing away: tilt alarm sensor, refer to page 25
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
25
> When there is an interruption in the power supply from the battery.
Depending on the national-market version, the alarm system briefly signals unauthorized entry attempts by:
> An acoustic alarm
> Switching on* the hazard warning flashers
Arming and disarming When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time.
You can open the luggage compartment lid using the button of the remote control even if the alarm system is armed, refer to page 20. The lid is locked and monitored again as soon as it is closed.
Panic mode You can trigger the alarm system if you find yourself in a dangerous situation.
Press the button for at least three seconds.
To switch off the alarm: press any button.
Switching off an alarm > Unlock the car with the remote control, refer
to page 19, or
> insert the remote control all the way into the ignition lock.
Indicator lamp displays
> The indicator lamp under the inside rear- view mirror flashes continuously: the sys- tem is armed.
> The indicator lamp flashes after locking: doors, hood or luggage compartment lid are
not properly closed. Even if you do not close the alerted area, the system begins to monitor the remaining areas, and the indi- cator lamp flashes continuously after approx. 10 seconds. The interior motion sensor and the tilt alarm sensor are not acti- vated.
> The indicator lamp goes out after unlocking: your vehicle has not been disturbed while you were away.
> If the indicator lamp flashes after unlocking until the remote control is inserted in the ignition, but for no longer than approx. 5 minutes: your vehicle has been disturbed while you were away.
Tilt alarm sensor The tilt of the vehicle is monitored. The alarm system reacts, e.g. to attempts to steal a wheel or tow the vehicle.
Interior motion sensor
Coupe In order for the interior motion sensor to func- tion properly, the windows and glass roof must be completely closed*.
Convertible The interior of the car is monitored up to the height of the seat cushions. Thus the alarm sys- tem is activated together with the interior motion sensor even if the convertible top is open. The alarm can be triggered unintention- ally by falling objects such as leaves, refer to Avoiding unintentional alarms.
Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. This pre- vents unintentional alarms, e.g. in the following situations:
> In duplex garages
> During transport on car-carrying trains, boats/ships or on a trailer
> When animals are to remain in the vehicle
O p
en in
g a
n d
c lo
si n
g
26
Switching off tilt alarm sensor and interior motion sensor Press the button on the remote control again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are switched off until the next time the vehicle is unlocked and subse- quently locked again.
Convenient access* Convenient access enables you to enter your vehicle without needing to hold the remote con- trol in your hand. All you need to do is wear the remote control close to your body, e.g. in your jacket pocket. The vehicle detects the corre- sponding remote control within the immediate vicinity or in the passenger compartment.
Convenient access supports the following functions:
> Unlocking/locking the vehicle
> Unlocking the luggage compartment lid separately
> Engine starting
> Convenient closing
Functional requirement > The vehicle or the luggage compartment lid
can only be locked when the vehicle detects that the remote control currently in use is outside of the vehicle.
> The vehicle cannot be locked or unlocked again until after approx. 2 seconds.
> The engine can only be started when the vehicle detects that the remote control cur- rently in use is inside the vehicle.
Comparison to the standard remote control In general, there is no difference between using convenient access or pressing the buttons on the remote control to carry out the functions mentioned above. You should therefore first
familiarize yourself with the instructions on opening and closing starting on page 18.
Special features regarding the use of conve- nient access are described below.
If you notice a brief delay while opening or closing windows, the glass roof or the
convertible top, the system is checking whether a remote control is inside the vehicle. Please repeat the opening or closing procedure, if nec- essary.<
Unlocking
Grasp the handle on the driver's or front pas- senger's door completely, arrow 1. This corre- sponds to pressing the button.
Locking Touch the surface, arrow 2, with your finger for approx. 1 second. This corresponds to pressing the button.
To preserve the battery, please make sure that the ignition and all electrical
consumers are switched off before locking the vehicle.<
Coupe: convenient closing For convenient closing, keep your finger on the surface, arrow 2.
Convertible: window and convertible top operation With the ignition at radio readiness or beyond, you can open and close the windows and the convertible top when a remote control is located inside the vehicle.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
27
Unlocking the luggage compartment lid separately Press the button on the outside of the luggage compartment lid. This corresponds to pressing the button.
If the vehicle detects that a remote con- trol has been accidentally left inside the
locked vehicle after the luggage compartment lid is closed, the lid will reopen. The hazard warning flashers flash and a signal* sounds.<
Switching on radio readiness Radio readiness is switched on by pressing the start/stop button, refer to page 47.
Do not depress the brake or the clutch, otherwise the engine will start immedi-
ately.<
Starting the engine You can start the engine or switch on the igni- tion when a remote control is inside the vehicle. It is not necessary to insert a remote control into the ignition switch, refer to page 47.
Switching off the engine in cars with automatic transmission The engine can only be switched off when the selector lever is in position P, refer to page 48. To switch the engine off when the selector lever is in position N, the remote control must be in the ignition switch.
Malfunctions Convenient access may malfunction due to local radio waves. If this happens, open and close the vehicle via the buttons on the remote control or using the integrated key. To start the engine afterward, insert the remote control into the ignition switch.
Warning lamps The warning lamp in the instrument cluster lights up when you attempt to start the engine: the engine cannot
be started. The remote control is not inside the vehicle or is malfunctioning. Take the remote control with you inside the vehicle or have it
checked. If necessary, insert another remote control into the ignition switch.
The warning lamp in the instrument cluster lights up while the engine is running: the remote control is no
longer inside the vehicle. After the engine is switched off, the engine can only be restarted within approx. 10 seconds.
The indicator lamp in the instrument cluster comes on: replace the battery in the remote control.
Replacing the battery The remote control for convenient access con- tains a battery that will need to be replaced from time to time.
1. Take the integrated key out of the remote control, refer to page 18.
2. Remove the cover.
3. Insert the new battery with the plus side fac- ing up.
4. Press the cover on to close.
Take the old battery to a battery collec- tion point or to your BMW center.<
Windows To prevent injuries, watch the windows while closing them.
Take the remote control out of the ignition when you leave the car, otherwise children could operate the electric windows and possi- bly injure themselves.<
O p
en in
g a
n d
c lo
si n
g
28
Coupe: opening, closing
> Press the switch to the resistance point: The window opens as long as you press the switch.
> Press the switch beyond the resistance point: The window opens automatically. Press the switch again to stop the opening move- ment.
You can close the windows in the same manner by pulling the switch.
Convertible: opening, closing Window operation with convenient access, refer also to page 20.
To close the side windows while driving, either close the rear windows first or all
four windows together, otherwise the windows may not close tightly at high speeds.<
Individually
> Press the switch to the resistance point: The window opens as long as you press the switch.
> Press the switch beyond the resistance point: The window opens automatically. Press the
switch again to stop the opening move- ment.
You can close the windows in the same manner by pulling the switch. The rear windows cannot be closed automatically.
Jointly
> Press the switch to the resistance point: All windows open as long as you press the switch.
> Press the switch beyond the resistance point: All windows open automatically. Press the switch again to stop the opening move- ment.
> Pull the switch: All windows close as long as you pull the switch.
After switching off the ignition When the remote control is removed or the igni- tion is switched off, you can still operate the windows for approx. 1 minute as long as no door has been opened.
Convenient operation For information on convenient operation via the remote control or the door lock, refer to page 19 or 22. For information on closing with conve- nient access, refer to Locking on page 26.
Pinch protection system If the closing force exceeds a specific value as a power window closes, the closing action is interrupted and the window reopens slightly.
Despite the pinch protection system check and clear the window's travel path
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
29
prior to closing it, otherwise the safety system might fail to detect certain kinds of obstruc- tions, such as thin objects, and the window would continue closing. Do not install any accessories that might inter- fere with window movement. Otherwise the pinch protection system could be impaired. Convertible: the rear windows are not equipped with pinch protection. Therefore, watch them closely when closing to avoid personal injury.<
Closing without pinch protection If there is an external danger, or if ice on the win- dows, etc., prevents you from closing the win- dows normally, proceed as follows:
1. Pull the switch past the resistance point and hold it there. Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.
2. Pull the switch again past the resistance point within approx. 4 seconds and hold it there. The window closes without pinch protection.
Coupe: glass roof*, electric To prevent injuries, watch the glass roof while closing it.
Take the remote control with you when you leave the car, otherwise children could operate the roof and possibly injure themselves.<
Raising Press the switch.
> The closed glass roof is raised and the slid- ing visor opens slightly.
> The open glass roof automatically travels into the raised position. The sliding visor remains completely open.
Do not close the sliding visor forcibly with the roof in the raised position, as this
would damage the mechanism.<
Opening, closing > Press the switch backwards to the resis-
tance point. The glass roof and the sliding visor open together as long as you hold the switch in this position.
> Press the switch backwards past the resis- tance point. The glass roof and the sliding visor open automatically. Briefly press the switch again to stop the opening movement.
You can close the glass roof in a similar manner by pressing the switch forwards. The sliding visor remains open and can be closed by hand.
For information on convenient operation via the remote control or the door lock, refer to page 19 or 22. For information on closing with conve- nient access, refer to Locking on page 26.
After switching off the ignition When the remote control is removed or the igni- tion is switched off, you can still operate the roof for approx. 1 minute as long as no door has been opened.
Pinch protection system If the glass roof encounters an obstruction dur- ing closing from approximately the middle of the opening in the roof, or during closing from the raised position, the closing movement is interrupted and the glass roof is opened again slightly.
Despite the pinch protection system check and clear the roof's travel path prior
to closing it, otherwise the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the roof would con- tinue closing.<
O p
en in
g a
n d
c lo
si n
g
30
Closing without pinch protection If there is an external danger, press the switch forward past the resistance point and hold it there. The roof closes without pinch protection.
Following interruptions in electrical power supply After a power failure, there is a possibility that the glass roof can only be raised. The system must be initialized. BMW recommends having this work done by your BMW center.
Closing manually* In the event of an electrical malfunction, you can move the glass roof manually:
1. Unclip the front of the cover of the interior lamps using the screwdriver from the onboard tool kit, refer to page 124.
2. On both sides, use the screwdriver to press on the clip inside the opening.
3. Remove the control unit.
4. Unplug the motor. Considerably less effort will be required for manual operation.
5. Insert the Allen wrench* supplied with the onboard tool kit, refer to page 124, into the opening provided. Move the glass roof in the desired direction.
6. Reattach the lamp cover and reinstall the control unit.
Convertible: top The fully automatic top combines reliable weather protection with simple and convenient operation.
The following tips will enhance your driving pleasure in your convertible:
> It is advisable that you close the convertible top when you park the vehicle. Not only does the closed top protect the vehicle inte- rior against unanticipated weather damage, it also offers a certain amount of theft pro- tection. However, even when the top is closed, valuables should only be stored in the locked cargo bay.
> Do not attach roof-mounted luggage sys- tems to the convertible top.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
31
> When opening a wet top, e.g. after driving in the rain, water may drip into the cargo bay. If necessary, remove items from the cargo bay beforehand to avoid water stains or soil- ing.
At temperatures below +147/106, do not move the convertible top as this could
result in damage. Do not keep the convertible top in the convert- ible top box for longer than one day if it is wet, otherwise the moisture may cause damage. Do not place objects on the convertible top, as otherwise they may fall off when you operate the convertible top and cause damage or injury. Never move the convertible top when the roll- over protection system is in the activated posi- tion. Always fully complete a convertible top move- ment. Driving with the convertible top incom- pletely opened or closed can result in damage or injury. Do not reach into the mechanism during the opening or closing procedure. Keep children away from the opening/closing path of the con- vertible top. For safety reasons, only move the convertible top when the vehicle is stationary, if possible.<
The convertible top swings upward when opening and closing. When operating the
convertible top in a garage, under a bridge, etc., ensure that there are at least 6 ft 7 in/2 m of headroom, otherwise the vehicle may be dam- aged.<
Before opening and closing > Comply with the safety precautions
described above.
> Ensure that the cargo bay partition is folded down and engaged on both sides, refer to page 91, otherwise it will not be possible to open the convertible top.
> Ensure that the cargo does not press against the cargo bay partition from below.
> Ensure that the luggage compartment lid is closed.
Opening and closing Convertible top operation with convenient access, refer also to page 20.
As of radio readiness, refer to page 47:
If possible, conserve the battery by only operating the convertible top when the
engine is running. Before closing the convertible top, remove all foreign objects from the windshield frame as these could prevent the hardtop from closing properly.<
1 Push button: close convertible top
2 Push button: open convertible top
3 LEDs
The side windows move down when the convertible top is opened.<
Operation while driving You can open or close the convertible top while driving, as long as the car is not moving faster than approx. 25 mph/40 km/h.
If you accelerate to over 30 mph/50 km/h while the convertible top is moving, the procedure is interrupted.
When operating the convertible top while driving, pay extra attention to the traffic to
avoid an accident. If possible, do not move the convertible top while driving in reverse gear, because your view to the rear is severely limited during the procedure. Do not operate the con- vertible top while driving in windy conditions. Do not drive faster than 30 mph/50 km/h, other- wise damage to the vehicle can occur.<
O p
en in
g a
n d
c lo
si n
g
32
LEDs > While the convertible top is being operated,
the left LED lights up green. It goes out as soon as the top is fully opened or closed.
> If the right-hand LED flashes red when you release the button, the opening or closing action has not yet finished.
> If the right-hand LED lights up red when the button is pressed, the cargo bay partition is raised, the luggage compartment lid is not closed or there is a malfunction. The con- vertible top cannot be moved.
Interruption The automatic sequence of movements is interrupted if the button for the convertible top operation is released. The sequence can be continued in the desired direction by pushing or pulling the buttons.
If the opening or closing procedure is inter- rupted for an extended period, the convertible top remains in the raised position for approx. 10 minutes and then slowly moves to a stable position.
A convertible top that is not fully opened or closed is a safety hazard.<
If the convertible top is not fully opened or closed, the luggage compartment lid can-
not be opened and the windows cannot be moved.<
Convenient operation with remote control or via door lock Refer to pages 20 and 22.
Closing manually Only close the convertible top manually if it is absolutely necessary, and never open
it manually. The convertible top box cover can- not be locked if there is an electrical defect and would then open while the vehicle is in motion. Incorrect handling can result in damage.<
Closing the convertible top manually should be performed by two people. The rear seats must not be occupied.
Before closing 1. Open the luggage compartment lid.
2. Take the screwdriver out of the onboard tool kit, refer to page 124.
3. If the convertible top lid is locked, release the two buttons in the cargo bay, arrows 1, using the screwdriver and pull them out forcefully as far as they will go. The convert- ible top box cover is unlocked.
4. Close the luggage compartment lid. After the convertible top box cover is unlocked manually, the luggage compartment lid can no longer be opened.
Closing 1. Slide the protective cap, arrow 2, forward.
2. Slowly and smoothly open the convertible top box cover all the way, arrow 3.
3. The locking pins must have engaged com- pletely. If they are still visible: close the con- vertible top box cover as far as necessary until the locking bolts engage audibly, then slowly open the cover. During this process,
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
33
do not close the convertible top box cover completely.
4. Lift out the front part of the convertible top, arrows 4, on both sides and swing it for- ward. At the same time keep the convertible top box cover from closing, e.g. using your shoulder.
5. Position the rear convertible top frame upright, arrow 5, and close the convertible top box cover, arrow 6. Then lower the rear convertible top frame.
6. Together with another person, press down the front convertible top frame from the out- side and on both sides as far as possible.
7. Carefully remove the cover in the center of the front convertible top frame using a pointed object.
8. Attach the handle of the screwdriver to the Allen wrench and insert the wrench into the opening provided.
9. Turn the Allen wrench all the way to the left, arrow 7, until the front convertible top frame is locked to the windshield frame. The rear convertible top frame is automatically pressed down onto the convertible top box cover and is sealed tight under tension.
The closing procedure must be fully com- pleted, otherwise damage or injury may
occur.<
Please contact your BMW center to have the cause of the malfunction eliminated.
Wind deflector The wind deflector keeps air currents in the passenger compartment at a low level when the convertible top is down and provides for an even more pleasant journey at higher speeds.
Installation 1. Remove the wind deflector from the protec-
tive cover and unfold it, arrows 1.
2. Press together the top and bottom parts of the wind deflector until the catch engages, arrow 2.
O p
en in
g a
n d
c lo
si n
g
34
3. Position both locking pins of one side at the openings provided for them.
4. Press the wind deflector into the openings, arrows 3, overcoming the tension in the springs, and push the free locking pin in the same direction, arrow 4.
5. Position the free locking pins at the corre- sponding openings and let the spring ten- sion lock the wind deflector in place, arrow 5.
6. Fold up the top section of the wind deflec- tor, arrow 6.
With the wind deflector installed: do not recline the front-seat backrests too far if
the seat is to be slid all the way back, as this would damage the wind deflector.<
Removing the wind deflector Proceed in the reverse order as used for instal- lation.
Folding
Slide the red release lever towards the middle of the wind deflector and push the two halves apart.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
35
Adjustments
Sitting safely The ideal sitting position can make a vital con- tribution to relaxed, fatigue-free driving. In con- junction with the safety belts, the head restraints and the airbags, the seated position has a major influence on your safety in the event of an accident. To ensure that the safety sys- tems operate with optimal efficiency, we strongly urge you to observe the instructions contained in the following section.
For additional information on transporting chil- dren safely, refer to page 44.
Airbags Always maintain an adequate distance between yourself and the airbags. Always
grip the steering wheel on the rim, with your hands in the 3 o'clock and 9 o'clock positions, to minimize the risk of injury to the hands or arms in the event of the airbag being triggered off. No one and nothing is to come between the air- bags and the seat occupant. Do not use the cover of the front airbag on the front passenger side as a storage area. Make sure that the front passenger is sitting correctly, i.e. not resting feet or legs on the dashboard, otherwise leg injuries can occur if the front air- bag is triggered. Make sure that passengers do not lean their heads against the side or head airbag, other- wise serious injuries could result if the airbags suddenly deployed.<
Even if you follow all the instructions, injuries resulting from contact with airbags cannot be fully excluded, depending on the circum- stances. The ignition and inflation noise may provoke a mild hearing loss in extremely sensi- tive individuals. This effect is usually only tem- porary.
For airbag locations and additional information on airbags, refer to page 71.
Head restraint A correctly adjusted head restraint reduces the risk of neck injury in the event of an accident.
Adjust the head restraint in such a way that its center is at approx. ear level. Oth-
erwise, there is an increased risk of injury in the event of an accident.<
Head restraints, refer to page 37.
Safety belt Before every drive, make sure that all occupants wear their safety belts. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute.
Your vehicle has four seats, each of which is equipped with a safety belt.
Never allow more than one person to wear a single safety belt. Never allow
infants or small children to ride in a passenger's lap. Make sure that the belt in the lap area sits low across the hips and does not press against the abdomen. The safety belt must not rest against the throat, run across sharp edges, pass over hard or frag- ile objects or be pinched. Fasten the safety belt so that it sits as snugly as possible against the lap and shoulder without being twisted. Other- wise the belt could slide over your hips and injure your abdomen in the event of a frontal collision. Avoid wearing bulky clothing and reg- ularly pull the belt in the upper-body area taut, otherwise its restraining effect could be impaired.<
Safety belts, refer to page 41.
Seats
Note before adjusting Never attempt to adjust your seat while the vehicle is moving. The seat could
respond with unexpected movement, and the ensuing loss of vehicle control could lead to an
A d
ju st
m en
ts
36
accident. On the front passenger seat as well, do not incline the backrest too far to the rear while the vehicle is being driven, otherwise there is a dan- ger in the event of an accident of sliding under the safety belt, eliminating the protection nor- mally provided by the belt.<
Comply with the instructions on head restraint height on page 37, and on damaged safety belts on page 41.
Manual adjustment Observe the adjustment instructions above to ensure the best possible per-
sonal protection.<
Longitudinal direction Pull lever 1 and slide the seat to the desired position. After releasing the lever, move the seat gently forward or back to make sure it engages prop- erly.
Height Pull lever 2 and apply your weight to the seat or lift it off, as necessary.
Backrest
Pull lever 3 and apply your weight to the back- rest or lift it off, as necessary.
Tilt*
Pull the lever and apply your weight to the seat or lift it off, as necessary.
Thigh support*
Pull the lever and move the thigh support for- ward or back.
Electrical adjustment* Observe the adjustment instructions above to ensure the best possible per-
sonal protection.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
37
1 Longitudinal direction
2 Height
3 Angle
4 Backrest
The head restraints are adjusted manually, refer to Head restraints on page 37.
Lumbar support*
You can also adjust the contour of the backrest to obtain additional support in the lumbar region.
The upper hips and spinal column receive sup- plementary support to help you maintain a relaxed, upright sitting position.
> Increase or decrease curvature: press the switch at the front or rear, respectively.
> Shift curvature up or down: press the switch at the top or bottom, respectively.
Backrest width*
You can change the width of the backrest to suit your individual preferences by adjusting the lat- eral-support pads.
Press the front or rear end of the switch. Backrest width decreases or increases accord- ingly.
To move the front seats forward or backward from outside or from one of the rear seats: with the door open, press the front end 1 or rear end 2 of the switch.
Head restraints A correctly adjusted head restraint reduces the risk of neck injury in the event of an accident.
Adjust the head restraint in such a way that its center is at approx. ear level. Oth-
erwise, there is an increased risk of injury in the event of an accident. Only remove a head restraint if no one will be sitting on the seat in question. Reinstall the head restraint before transporting anyone on that seat. Otherwise,
A d
ju st
m en
ts
38
the passenger will be without protection from the head restraint.<
Front seats
Height adjustment
> To raise: pull up.
> To lower: press the button, arrow 1, and slide the head restraint down.
Removing 1. Pull it up as far as it will go.
2. Press the button, arrow 1, and pull the head restraint all the way out.
Rear seats
Coupe: height adjustment
> To raise: pull up.
> To lower: press the button, arrow 1, and slide the head restraint down.
Convertible: raising and lowering Only lower the head restraints if there are no passengers in the rear. Raise all low-
ered head restraints before transporting pas- sengers in the rear.<
> To raise: pull up.
> To lower: press the button, arrow 1, and slide the head restraint down, arrow 2.
Removing 1. Pull it up as far as it will go.
2. Press the button, arrow 1, and pull the head restraint all the way out.
Coupe: folding head restraint down and up*
Depending on your vehicle's equipment, it may contain foldable head restraints.
Folding down: Press the button, arrow 1.
Folding up: Pull the head restraint.
Only fold down the head restraints if there are no passengers in the rear. Fold up the
head restraints again before transporting pas- sengers in the rear.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
39
Seat with manual longitudinal adjustment
Convenient entry The convenient entry feature includes a mem- ory function for the longitudinal adjustment and backrest angle.
1. Pull lever 1 and swing the backrest forward.
2. Push the seat forward.
Previous position Push the seat backward and swing the backrest back.
When pushing the seat into its rearmost position, make sure that no one is injured
and that no objects are damaged. Before driving off, engage both seats and back- rests so that they are locked in place. Otherwise there is a risk of accident due to an unexpected movement.<
Seat with electrical longitudinal adjustment
Convenient entry The convenient entry feature includes a mem- ory function for the longitudinal adjustment and backrest angle.
1. Pull lever 1 and swing the backrest forward.
2. Press the front end 2 of the switch until the seat has moved into the desired position.
Previous position Press the rear end 3 of the switch until the seat automatically stops in its previous position, and fold the backrest back. If you release the switch before the previous seat position is reached, the seat will stop at its current position.
When sliding the seat backward, make sure no one is injured and no objects are
damaged. Before driving off, engage both seats and back- rests so that they are locked in place. Otherwise there is a risk of accident due to an unexpected movement.<
Heated seats*
Press once for each temperature level. Three LEDs indicate the highest temperature.
To switch off: Press button longer.
If you continue driving within approx. 15 minutes, the seat heating is automatically activated at the previously set temperature.
The temperature is lowered or the heating is switched off entirely to save on battery power. The LEDs stay lit.
Seat and mirror memory* You can store and call up two different combi- nations of driver's-seat and exterior-mirror positions.
A d
ju st
m en
ts
40
Settings for the backrest width and lumbar sup- port are not stored in memory.
Storing
1. Switch on radio readiness or the ignition, refer to page 47.
2. Adjust the seat and exterior mirrors to the desired positions.
3. Press the button. The LED in the button lights up.
4. Press the desired memory button 1 or 2: the LED goes out.
Call-up Do not call up memory while you are driv- ing, otherwise unexpected seat move-
ment could result in an accident.<
Convenience mode 1. Unlock and open the driver's door or switch
on radio readiness, refer to page 47.
2. Lightly push the desired memory button 1 or 2.
The adjusting procedure is halted when you touch a seat adjustment switch or one of the memory buttons.
Safety feature 1. Close the driver's door and switch the igni-
tion on or off, refer to page 47.
2. Press the desired memory button 1 or 2 and keep it pressed until the adjustment process has been completed.
If the button was pressed accidentally: Press the button again; the LED goes out.
Call-up with the remote control The driver's seat position last stored is stored for the remote control currently in use.
You can select the occasion on which the seat is reset to that position.
> Call-up when the vehicle is unlocked.
> Call-up when the driver's door is opened.
When this Personal Profile function is used, first make sure that the footwell
behind the driver's seat is free of obstacles. Failure to do so could cause injury to persons or damage to objects as a result of a rearward movement of the seat.<
The adjusting procedure is halted when you touch a seat adjustment switch or one of the memory buttons.
Activating/deactivating automatic call- up 1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
2. Press button 2.
3. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
41
4. Press button 2.
5. Use button 1 to select:
> Call-up when the vehicle is unlocked.
> Call-up when the driver's door is opened.
> Switch off automatic function.
6. Press button 2. The setting is stored.
Safety belts Observe the adjustment instructions on page 35 to ensure the best possible per-
sonal protection.<
Before every drive, make sure that all occupants wear their safety belts. Airbags complement the safety belt as an additional safety device, but they do not represent a substitute.
Closing Make sure you hear the latch plate engage in the belt buckle.
The upper belt anchor is suitable for adults of any stature as long as the seat is adjusted prop- erly, refer to page 35.
Opening 1. Grasp the belt firmly.
2. Press the red button in the buckle.
3. Guide the belt into its reel.
'Fasten safety belts' reminder for front seats
The indicator lamps come on and an acoustic signal sounds. Check whether the safety belt has been fas- tened correctly.
The 'Fasten safety belts' reminder is issued as long as the driver's safety belt has not been fas- tened. The 'Fasten safety belts' reminder is also issued above approx. 5 mph/8 km/h if the front passenger's safety belt has not been fastened, if there are objects on the front passenger's seat or if the driver or front passenger unfasten their safety belts.
Damage to safety belts If the safety belts are damaged or stressed in an accident: have the belt sys-
tem, including any belt tensioners or child- restraint systems, replaced and the belt anchors checked. Have this work done only by your BMW center or at a workshop that works according to BMW repair procedures with cor- respondingly trained personnel. Otherwise, it is not guaranteed that the safety devices will func- tion properly.<
Mirrors
Exterior mirrors The front passenger's mirror is more con- vex than the driver's mirror. The objects
seen in the mirror are closer than they appear. Do not gauge your distance from traffic behind you on the basis of what you see in the mirror; otherwise there is an increased risk of an acci- dent.<
A d
ju st
m en
ts
42
1 Adjustments
2 Switching to the other mirror or automatic curb monitor*
3 Folding mirrors in and out* The setting for the exterior mirrors is stored for the remote control currently in use*. The stored position is called up automatically when the vehicle is unlocked.
Manual adjustment The mirrors can also be adjusted manually: press the edge of the glass.
Folding mirrors in and out* At driving speeds up to approx. 12 mph/ 20 km/h, you can fold the mirrors in and out by pressing button 3. This can be beneficial in nar- row streets, for example, or for moving mirrors that were folded in by hand back out into their correct positions. Mirrors that were folded in are folded out automatically at a speed of approx. 25 mph/40 km/h.
Automatic heating Depending on the outside temperature, both exterior mirrors are heated automatically when the engine is running or the ignition is switched on.
Passenger-side mirror tilt function automatic curb monitor*
Activating 1. Push the switch to the position for the
driver's-side mirror, arrow 1.
2. Engage reverse gear or move the selector lever to position R. The glass of the mirror on the passenger side tilts slightly down. This allows the driver to see the area immediately adjacent to the vehicle, e.g. a curb, when backing into a parking space.
Deactivating Push the switch to the position for the passen- ger-side mirror, arrow 2.
Interior rearview mirror
Turn the knob to reduce glare from the head- lamps of cars behind you when driving at night.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
43
Interior and exterior mirrors, automatic dimming feature*
The automatic dimming feature of the interior and exterior mirrors* is controlled by two photo cells in the interior rearview mirror. One photo cell is in the mirror frame, see arrow; the other is on the back of the mirror.
In order to ensure that the system functions correctly, keep the photo cells clean, do not cover the area between the interior rearview mirror and windshield, and do not affix adhesive labels or stickers of any kind to the windshield directly in front of the mirror.
Steering wheel
Adjustments Do not adjust the steering wheel position while the car is in motion, otherwise there
is a risk of accident due to an unexpected move- ment.<
1. Fold the lever down.
2. Move the steering wheel to the preferred height and angle to suit your seated posi- tion.
3. Swing the lever back up.
Do not use force to swing the lever back up, otherwise the mechanism
will be damaged.<
Steering wheel heating*
Press the button.
The LED in the button lights up when the steer- ing wheel heating is switched on.
T ra
n sp
o rt
in g
c h
ild re
n s
af el
y
44
Transporting children safely
The right place for children Do not leave children unattended in the vehicle, otherwise they could endanger
themselves and/or other persons by opening the doors, for example.<
Children always in the rear Accident research has shown that the safest place for children is on the rear seat.
Children under the age of 13 or smaller than 5 ft/150 cm may be transported only
in the rear in suitable child-restraint systems appropriate for their age, weight and size. Oth- erwise there is an increased risk of injury in the event of an accident.<
Children 13 years of age or older must be buck- led in with a safety belt as soon as there no longer is any child-restraint system that is appropriate for their age, size and weight.
Exception for front passenger seat Should it be necessary to use a child- restraint system on the front passenger
seat, the front and side airbags for the front pas- senger must be deactivated. Otherwise, a child traveling on that seat will face a significant risk of injury if the airbags are triggered off, even with a child-restraint system.<
For more information on automatic deactivation of the front passenger airbags refer to page 71.
Installing child-restraint systems
Observe the child-restraint system man- ufacturer's instructions when selecting,
installing and using child-restraint systems. Otherwise the protective effect may be dimin- ished. <
Standard child-restraint systems are designed to be secured with a lap belt or with the lap-belt section of a lap-and-shoulder belt. Incorrectly
or improperly installed child-restraint systems can increase the risk of injury to children. Always follow the installation instructions for the system with the greatest care.
On the front passenger seat After installing a child-restraint system on the front passenger seat, make sure that
the front and side airbags for the front passen- ger are deactivated, otherwise there is an increased risk of injury if the airbags deploy.<
Backrest width* The backrest width of the front passen- ger's seat must be at its widest possible
setting. Do not change the setting after install- ing the child seat. Otherwise the child seat's stability on the front passenger's seat is lim- ited.<
1. Adjust the backrest width to its widest set- ting, refer to page 37.
2. Install the child seat.
Child seat security
The rear safety belts and the front passenger's safety belt can be prevented from being pulled out in order to fasten child-restraint systems.
To lock the safety belt 1. Secure the child-restraint system with the
belt.
2. Pull the belt strap all the way out.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
45
3. Allow the belt strap to retract and pull it taut against the child-restraint system.
The safety belt is locked.
To unlock the safety belt 1. Open the belt buckle.
2. Remove the child-restraint system.
3. Allow the safety belt strap to retract all the way.
LATCH child-restraint fixing system LATCH: Lower Anchors and Tethers for CHil- dren.
To install and use the LATCH child restraint system, follow the operating and
safety instructions provided by the manufac- turer of the system, otherwise the protective function of the seat may be compromised.<
Before installing the child seat, pull the belt out of the area for the child-restraint fixing system.
Ensure that both lower LATCH anchors are correctly engaged and that the child
restraint system is resting firmly against the backrest, otherwise the protective function of the seat may be compromised.<
Coupe: rear seats
The anchor points for the lower LATCH anchors are located behind the labeled protec- tive caps.
Convertible: rear seats
The anchor points for the lower LATCH anchors are located at the positions indicated by arrows, in the gap between the seat and the backrest.
Coupe: child-restraint system with tether strap
Use the top tether anchors to secure child-restraint systems only, otherwise
the anchors could be damaged.<
For child-restraint systems with tether straps there are two additional anchors, see arrows.
Coupe: placement of the tether strap Make sure the upper retaining strap does not run over sharp edges and is not
twisted as it passes to the top anchor. Other- wise the strap will not properly secure the child- restraint system in the event of an accident.<
T ra
n sp
o rt
in g
c h
ild re
n s
af el
y
46
1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor
5 Rear window shelf
6 Seat backrest
7 Upper retaining strap of child-restraint sys- tem
If necessary, fold the head restraints upward before use.
1. Push the head restraint upward.
2. Guide the upper retaining strap between the head restraint holders.
3. Use the hook to clip the retaining strap to the anchor.
4. Push the head restraint into its lowermost position.
5. Pull the retaining strap taut.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
47
Driving
Ignition lock
Insert the remote control into the ignition lock
Insert the remote control all the way into the ignition lock.
> Radio readiness is switched on. Individual electrical consumers can operate.
Convenient access* If the car is equipped with convenient access, only insert the remote control into the ignition lock under special circumstances, refer to page 26.
Removing the remote control from the ignition lock
Do not forcibly pull the remote control out of the ignition lock as this may cause
damage.<
Before removing the remote control, push it all the way in to release the locking mechanism.
> The ignition is switched off if it was on.
Automatic transmission You cannot take out the remote control unless the selector lever is in the P position: interlock.
Start/stop button
Pressing the start/stop button switches radio readiness or the ignition on or off.
The engine is started when you press the start/stop button and depress the clutch if
the car has manual transmission, or the brake if the car has automatic transmission.<
Radio readiness Individual electrical consumers can operate. The time and the outside temperature are dis- played in the instrument cluster.
Radio readiness is switched off automatically:
> When the remote control is removed from the ignition lock
> In cars with convenient access*, by touch- ing the surface above the door lock, refer to Locking on page 26
Ignition on All electrical consumers can operate. The odometer and trip odometer are displayed in the instrument cluster.
When the engine is off, please switch off the ignition and any unnecessary electri-
cal consumers in order to preserve the bat- tery.<
Radio readiness and ignition off All indicator and warning lamps as well as dis- plays in the instrument cluster go out.
D ri
vi n
g
48
Starting the engine Do not run the engine in closed rooms, otherwise the inhalation of toxic exhaust
gases can cause unconsciousness and death. The exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Never leave an unattended vehicle with the engine running, otherwise such a vehicle repre- sents a potential safety hazard. Before leaving the car with the engine running, place the transmission in neutral or move the selector lever to position P and forcefully apply the parking brake to prevent the car from mov- ing.<
Do not wait for the engine to warm up while the vehicle remains stationary. Start driving right away, but at moderate engine speeds.
Avoid frequent starting in quick succes- sion as well as repeated start attempts in
which the engine does not start. Otherwise, the fuel is not burned or incompletely burned and there is a danger of overheating and damaging the catalytic converter.<
Manual transmission Remote control in the ignition lock or, with con- venient access, inside the vehicle, refer to page 26.
1. Depress the brake.
2. Depress the clutch and shift to neutral posi- tion.
3. Press the start/stop button.
The starter operates automatically for a certain time, and stops automatically as soon as the engine has started.
Automatic transmission Remote control in the ignition lock or, with con- venient access, inside the vehicle, refer to page 26.
1. Depress the brake.
2. Move the selector lever to position P.
3. Press the start/stop button.
The starter operates automatically for a certain time, and stops automatically as soon as the engine has started.
Switching off the engine Always take the remote control with you when you leave the vehicle.
When parking, apply the parking brake force- fully, otherwise the vehicle could begin to roll.<
Manual transmission 1. With the car at a standstill, press the start/
stop button.
2. Shift into first gear or reverse.
3. Forcefully apply the parking brake.
4. Removing the remote control from the igni- tion lock, refer to page 47.
Automatic transmission 1. With the car at a standstill, move the selec-
tor lever to position P.
2. Press the start/stop button.
3. Forcefully apply the parking brake.
4. Removing the remote control from the igni- tion lock, refer to page 47.
Before driving into a car wash The vehicle is able to roll if you take the follow- ing steps:
1. Insert the remote control, even with conve- nient access, into the ignition lock.
2. Depress the brake.
3. Move the selector lever to position N.
4. Switch off the engine.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
49
Parking brake The parking brake is primarily intended to pre- vent the vehicle from rolling while parked; it brakes the rear wheels.
Indicator lamp The indicator lamp is lit, and when you drive off a signal sounds in addition. The parking brake is still applied.
Indicator lamp for Canadian models.
Applying The lever locks in position automatically.
Releasing
Pull slightly upwards, press the button and lower the lever.
In exceptional cases, if the parking brake has to be used to slow or stop the car, do
not pull the lever up too hard. In doing so, con- tinuously press the button of the parking brake lever. Otherwise, excessive force on the parking brake can lock up the rear wheels and cause the rear of the car to swerve.<
To prevent corrosion and one-sided brak- ing action, occasionally apply the parking
brake lightly when the vehicle is slowly coming to a stop if the traffic conditions are suitable. The brake lamps do not light up when the park- ing brake is applied.<
Manual transmission
When shifting into 5th or 6th gear, press the gearshift lever to the right. Otherwise
the engine could be damaged if you inadvert- ently shift into 3rd or 4th gear.<
Reverse gear Select this only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance has to be overcome.
Automatic transmission with Steptronic* In addition to fully automatic operation, you can also manually shift with the Steptronic, refer to page 50.
Vehicle parking To prevent the vehicle from rolling, always select position P and apply the
parking brake before leaving the vehicle with the engine running.<
Disengaging the remote control In order to remove the remote control from the ignition lock, you must first move the selector lever to position P and switch off the engine: interlock. Removing the remote control from the ignition lock, refer to page 47.
Selector lever positions P R N D M/S +
D ri
vi n
g
50
Displays in the instrument cluster
P R N D DS M1 to M6
The selector lever position is displayed, or the current gear in the manual mode.
Changing selector lever positions > With the ignition switched on or the engine
running, the selector lever can be moved out of position P: interlock.
> Before moving the lever away from P or N with the vehicle stationary, first depress the brake; otherwise the selector lever will refuse to move: shiftlock.
To prevent the vehicle from creeping after you select a driving position,
depress the brake until you are ready to start.<
A lock prevents you from inadvertently engag- ing selector lever positions R and P. To cancel the lock, press the button on the front of the selector lever, see arrow.
P Park Select this only when the vehicle is stationary. The drive wheels are locked.
R Reverse Select this only when the vehicle is stationary.
N Neutral You can select this in a car wash, for example. The vehicle can roll.
D Drive, automatic position Position for normal vehicle operation. All for- ward gears are selected automatically.
Under normal operating conditions, fuel con- sumption is lowest when you are driving in posi- tion D.
Kick-down Kick-down enables you to achieve maximum performance. Press the accelerator pedal beyond the full- throttle resistance point.
Sport program and manual operation M/S
Move selector lever from position D toward the left into the M/S shifting slot: The sport program is activated and DS is dis- played on the instrument cluster. This position is recommended for a performance-oriented driving style.
To use the automatic mode again, move the selector lever to the right into position D.
Shifting gears via the selector lever When you press the selector lever forwards or backwards, the manual mode is activated and Steptronic changes gear. M1 through M6 are displayed on the instrument cluster.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
51
Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected is briefly displayed in the instru- ment cluster, followed by the gear actually in use.
Shifting gears via shift paddles* on the steering wheel The shift paddles allow you to shift gears quickly since both hands can remain on the steering wheel.
> When you use the shift paddles on the steering wheel to shift gears in automatic mode, the transmission switches to manual mode.
> If you do not accelerate or shift gears using the shift paddles for a certain amount of time, the transmission switches back to automatic mode.
If the selector lever is in the M/S gear plane, manual mode remains active.<
> To shift up: pull one of the shift paddles.
> To shift down: press one of the shift pad- dles.
Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; thus, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected is briefly displayed in the instru- ment cluster, followed by the gear actually in use.
Overriding selector lever lock Should the selector lever refuse to move out of position P although the button on the selector lever is pressed, the selector lever lock can be overridden:
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever until the sleeve is inside out.
3. Using the screwdriver from the onboard tool kit, refer to page 124, press the red lever, see arrow, while moving the selector lever to the desired position.
Turn signals/ headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
Using turn signals Press the lever beyond the resistance point.
To turn off manually, press the lever to the resistance point.
D ri
vi n
g
52
Unusually rapid flashing of the indicator lamp and the turn signals indicates that
one of the turn signal bulbs has failed.<
Indicating a turn briefly Press the lever as far as the resistance point for as long as you wish to indicate a turn.
Triple turn signal activation Press the lever as far as the resistance point. The turn signals flash three times.
You can activate or deactivate this function:
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
5. Press button 2.
6. Use button 1 to select:
> Turn signals flash once.
> Triple turn signal.
7. Press button 2. The setting is stored for the remote control currently in use.
Wiper system
1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or rain sensor*
4 Cleaning windshield and headlamps* 5 Setting speed for intermittent wipe, or sen-
sitivity of the rain sensor
Switching on wipers Press the lever upward, arrow 1.
The lever automatically returns to its initial posi- tion when released.
Normal wiper speed Press once. The system switches to operation in the inter- mittent mode when the vehicle is stationary.
Fast wiper speed Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
53
Intermittent wipe or rain sensor* If the car is not equipped with a rain sensor, the intermittent-wipe time is a preset.
If the car is equipped with a rain sensor, the time between wipes is controlled automatically and depends on the intensity of the rainfall. The rain sensor is mounted on the windshield, directly in front of the interior rearview mirror.
Activating intermittent wipe or rain sensor
Press the button, arrow 3. The LED in the but- ton lights up.
Setting speed for intermittent wipe or sensitivity of the rain sensor Turn the thumb wheel 5.
Deactivating intermittent wipe or rain sensor Press the button again, arrow 3. The LED goes out.
Deactivate the rain sensor before enter- ing an automatic car wash. Failure to do
so could result in damage caused by undesired wiper activation.<
Cleaning windshield and headlamps* Pull the lever, arrow 4. Washer fluid is sprayed onto the windshield and the wipers are operated for a short time.
When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals.
Do not use the washers if there is any danger that the fluid will freeze on the
windshield. If you do, your vision could be
obscured. Antifreeze should therefore be added to the fluid, refer to Washer fluid. Do not use the washers when the washer fluid reservoir is empty, otherwise you will damage the washer pump.<
Windshield washer nozzles The windshield washer nozzles are heated automatically* while the engine is running or the ignition is switched on.
Washer fluid Washer fluid antifreeze is flammable. Therefore, keep it away from ignition
sources and only store it in the closed original container that is kept out of reach of children, otherwise there is a risk of personal injury. Comply with the instructions on the con- tainer.<
Washer fluid filler neck Only refill washer fluid when the engine is cool to avoid contact with hot engine
parts. Otherwise, fluid spills constitute a fire hazard and a risk to personal safety.<
All washer nozzles are supplied with washer fluid by the same reservoir.
Fill with water and, if required, with a washer antifreeze, according to manufacturer's recom- mendations.
Mix the water and antifreeze before filling the washer fluid reservoir to make sure
the correct concentration is maintained.<
Capacity Approx. 6.3 US quarts/6 liters.
D ri
vi n
g
54
Cruise control*
The concept You can use the cruise control feature begin- ning at approx. 20 mph/30 km/h. The car then stores and maintains the speed that you specify using the lever on the steering column.
Do not use cruise control when driving at constant speed is prevented by adverse
conditions, e.g. winding roads, dense traffic or poor road conditions due to, e.g. snow, rain, ice or loose surfaces. Otherwise you could lose control of the vehicle and cause an accident as a result.<
One lever for all functions
1 Storing and maintaining speed or accelerat- ing
2 Storing and maintaining speed or deceler- ating
3 Deactivating cruise control
4 Resuming a speed stored beforehand
Maintaining current speed Tap the lever, arrow 1, or pull it briefly, arrow 2. The car's current speed is stored and main- tained. It is briefly displayed in the instrument cluster.
If the engine braking power is insufficient on a downhill slope, the set speed may be exceeded. On uphill gradients, it may prove impossible to maintain the set speed if engine power output is insufficient.
Increasing speed Repeatedly press the lever, arrow 1, until the desired speed is reached. Each time the lever is pressed lightly, the speed is increased by approx. 1 mph/1 km/h.
Accelerating using the lever Press the lever, arrow 1, until the desired speed is reached. The vehicle accelerates without pressure on the accelerator pedal. The system stores and maintains the speed.
Decreasing speed Repeatedly pull the lever, arrow 2, until the desired speed is reached. The functions are the same as when the set speed is increased or the vehicle is accelerated, except that in this case the speed decreases.
Deactivating cruise control Tap the lever upwards or downwards, arrow 3.
In addition, the system is automatically deacti- vated:
> When you brake the vehicle
> When you depress the clutch of a manual transmission or shift to neutral
> When you select the automatic transmis- sion's neutral position N
> When the vehicle travels faster or slower than the set speed for an extended period, e.g. when the accelerator is depressed
> When you activate DTC or deactivate DSC
> When DSC is intervening
Resuming a speed stored beforehand Press the button, arrow 4. The last stored speed is resumed and main- tained.
The stored speed is briefly displayed in the instrument cluster.
The stored speed is cleared when the ignition is switched off.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
55
Display in the instrument cluster
When the speed at which the vehicle is traveling is stored or when a stored speed is called up, the speed is briefly displayed in the instrument cluster.
E ve
ry th
in g
u n
d er
c o
n tr
o l
56
Everything under control
Odometer, outside temperature display, clock
1 Knob in the instrument cluster
2 Outside temperature and clock
3 Odometer and trip odometer
Knob in the instrument cluster > To reset the trip odometer while the ignition
is switched on
> To display the time, outside temperature and odometer briefly while the ignition is switched off
Units of measure To select the respective units of measure, miles or km for the odometer as well as 7 or 6 for the outside temperature, refer to Formats and units of measure on page 60.
The setting is stored for the remote control cur- rently in use.
Time, outside temperature display Setting the time, refer to page 62.
Outside temperature warning When the displayed temperature sinks to approx. +37 7/+36, a signal sounds and a warning lamp lights up. There is an increased risk of black ice.
Black ice can also form at temperatures above +37 7/+36. You should there-
fore drive carefully on bridges and shaded
roads, for example, otherwise there is an increased risk of an accident.<
Odometer and trip odometer Resetting trip odometer: With the ignition switched on, press button 1 in the instrument cluster.
When the vehicle is parked If you still want to view the time, outside tem- perature and odometer reading briefly after the remote control has been taken out of the igni- tion lock: Press button 1 in the instrument cluster.
Tachometer
Never force the engine speed up into the red warning field, see arrow. In this range, the fuel supply is interrupted to protect the engine.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
57
Coolant temperature A warning lamp will come on if the coolant, and therefore the engine, becomes too hot.
Check coolant level, refer to page 117.
Engine oil temperature*
When the engine is at normal operating temper- ature, the engine oil temperature is between approx. 2107/1006 and approx. 3007/ 1506.
If the engine oil temperature is too high, a warn- ing lamp comes on in the instrument cluster.
Fuel gauge
Fuel tank capacity: approx. 14 US gallons/ 53 liters.
You can find information on refueling on page 104.
If the tilt of the vehicle varies for a longer period, when you are driving in mountainous areas, for example, the indicator may fluctuate slightly.
Fuel display 135i: in speedometer.
Reserve
Once the fuel level has fallen to the reserve zone, the indicator lamp lights up briefly and the cruising range for the remaining amount of fuel is displayed. The indicator lamp stays on per- manently when the remaining range is less than approx. 30 miles/50 km.
Refuel as soon as possible once your cruising range falls below 30 miles/
50 km, otherwise engine functions are not ensured and damage can occur.<
Computer
Displays in the instrument cluster
Calling up information
Press the button in the turn indicator lever.
E ve
ry th
in g
u n
d er
c o
n tr
o l
58
The following items of information are dis- played in the order listed:
> Cruising range
> Average speed
> Average fuel consumption
> Current fuel consumption
> No information
To set the corresponding units of measure, refer to Formats and units of measure on page 60.
Cruising range Displays the estimated cruising range available with the remaining fuel. The range is calculated on the basis of the way the car has been driven over the last 18 miles/30 km and the amount of fuel currently in the tank.
It is important that you refuel as soon as possible once your cruising range falls
below 30 miles/50 km, otherwise engine func- tions are not ensured and damage can occur.<
Average speed Periods with the vehicle parked and the engine switched off are not included in the calculations of average speed.
To reset average speed: press the button in the turn indicator lever for approx. 2 seconds.
Average fuel consumption The average fuel consumption is calculated for the time during which the engine is running.
To reset average fuel consumption: press the button in the turn indicator lever for approx. 2 seconds.
Current fuel consumption Displays the current fuel consumption. This allows you to see whether your current driving style is conducive to fuel economy with mini- mum exhaust emissions.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
59
Settings and information
Operating principle
Certain settings and information can only be made or called up when the ignition is switched on. A number of settings cannot be made while driving.
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val- ues
> Calling up computer information 57
3 When the lights are on: instrument lighting brightness 77
4 Calling up Check Control 62
5 Checking oil level 115
6 Initializing the Flat Tire Monitor 66 Resetting the Tire Pressure Monitor 68
7 Setting the time 62
8 Setting the date 62
9 Viewing service requirement display 61
10 Setting formats and units of measure, resetting to factory settings 60
11 Adjusting settings
> Confirmation signals when locking and unlocking the vehicle 21
> Response during unlocking procedure 19
> Automatic locking 22
> Pathway lighting 74
> Daytime running lamps 75
> Triple turn signal activation 52
> Seat and mirror memory* 39
Exiting displays The outside-temperature reading and the time reappear when you press button 2 or if you make no entries within approx. 15 seconds. If required, complete the current setting first.
E ve
ry th
in g
u n
d er
c o
n tr
o l
60
Formats and units of measure You can set formats and units of measure.
For operating principle refer to page 59.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
4. Use button 1 to select desired format or desired unit of measure, e.g. for fuel con- sumption.
> Fuel consumption: mpg, km/l, l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm, month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2. The setting is stored for the remote control currently in use.
Resetting to factory settings You can reset the formats and units of measure back to the default settings.
1. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
2. Press button 2.
3. Use button 1 to select "RESET".
4. Press button 2 until is displayed. The settings are reset. The setting is stored for the remote control currently in use.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
61
Service requirements
The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition.
The extent of service work required can be read out from the remote control by
your BMW Service Advisor.<
For certain maintenance operations, you can view the respective distance remaining or due date individually in the instrument cluster.
1. Switch on the ignition, refer to page 47.
2. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the words "SERVICE-INFO".
3. Press button 2.
4. Use button 1 to scroll through the individual service items.
Possible displays
1 Button for selecting functions
2 Service requirements
3 Engine oil
4 Roadworthiness test*
5 Front brake pads
6 Rear brake pads
7 Brake fluid
E ve
ry th
in g
u n
d er
c o
n tr
o l
62
The sequence of displayed service items may vary. The data for the next service appointment is shown first.
Clock
Setting the time
In the instrument cluster To set the 12h/24h format, refer to Formats and units of measure on page 60.
1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the time and the word "SET".
2. Press button 2.
3. Use button 1 to set the hours.
4. Press button 2 to confirm the entry.
5. Use button 1 to set the minutes.
6. Press button 2 to confirm the entry.
7. Press button 2. The system accepts the new time.
Date
Setting the date
In the instrument cluster To set the dd/mm or mm/dd date format, refer to Formats and units of measure on page 60.
1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the date and the word "SET".
2. Press button 2.
3. Use button 1 to set the day of the month.
4. Press button 2 to confirm the entry.
5. Set the month and the year in the same way.
6. Press button 2. The system stores the new date.
Check Control
The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the sys- tems monitored. Such a Check Control mes- sage includes indicator or warning lamps in the instrument cluster and, in some circumstances, a signal.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
63
Indicator and warning lamps can light up in a variety of combinations and colors.
indicates that Check Control messages have been stored. You can view the Check Control messages whenever it is convenient for you.
What to do in case of a malfunction The meaning of each lamp in the event of a mal- function and tips on how to respond are listed starting on page 134.
Hiding Check Control messages
Press the button in the turn indicator lever.
Some Check Control messages are displayed until the respective malfunction has been recti- fied. They cannot be hidden. If several malfunc- tions occur at the same time, they are displayed in succession.
Other Check Control messages are automati- cally hidden after approx. 20 seconds, but are kept in memory.
Viewing stored Check Control messages
1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the words "CHECK".
2. Press button 2. "CHECK OK" appears if there are no Check Control messages. If a Check Control mes- sage has been stored, the corresponding lamp comes on.
3. Push button 1 to check for other messages.
4. Press button 2. The display again shows the outside tem- perature and the time.
T ec
h n
o lo
g y
fo r d
ri vi
n g
c o
m fo
rt a
n d
s af
et y
64
Technology for driving comfort and safety
Park Distance Control PDC*
The concept The PDC assists you with maneuvering in tight parking spaces. Acoustic signals warn you of the presence of an object behind your vehi- cle.Four ultrasonic sensors in the bumper mea- sure the distance.
An acoustic warning does not sound until an object is closer than approx. 2 ft/60 cm to the corner sensors, or closer than approx. 5 ft/ 1.50 m to the center sensors.
PDC is a parking aid that can indicate objects when they are approached
slowly, as is usually the case when parking. Avoid approaching an object at high speed, oth- erwise physical circumstances may lead to the system warning being issued too late.<
Switching on automatically With the engine running or the ignition switched on, the system is activated after approx. 1 sec- ond when you engage reverse gear or move the automatic transmission selector lever to position R. Wait this short period before driving.
Switching off automatically After approx. 55 yd/50 m of driving or above approx. 20 mph/30 km/h, the system switches off and the LED goes out.
Signal tones When nearing an object, its position is indicated correspondingly by an interval tone. As the dis- tance between vehicle and object decreases, the intervals between the tones become shorter. If the distance to the nearest object falls to below roughly 1 ft/30 cm, then a contin- uous tone sounds.
An interval tone is interrupted after approx. 3 seconds:
> If you remain in front of an object that has been detected by only one of the corner sensors
> If you are driving parallel to a wall
Malfunction The indicator lamp in the instrument cluster comes on. PDC is malfunc- tioning.Have the system checked.
To avoid this problem, keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively. When using a high-pressure cleaner, do not direct the jet toward the sensors for lengthy periods and only spray from a distance of at least 4 in/10 cm.
System limitations Even with PDC, final responsibility for estimating the distance between the
vehicle and any obstructions always remains with the driver. Even when sensors are pro- vided, there is a blind spot in which objects can no longer be detected. The system is also sub- ject to the physical limits that apply to all forms of ultrasonic measurement, such as those encountered with trailer towbars and hitches, thin or wedge-shaped objects, etc. Low objects that have already been displayed, e.g. curbs, can disappear again from the detection area of the sensors before or after a continuous tone sounds. Higher, protruding objects, e.g. ledges, cannot be detected. Loud sound sources out- side or inside the car can drown out the PDC signal. Therefore, always drive cautiously, oth- erwise there is a risk of personal injury or prop- erty damage.<
Driving stability control systems Your BMW has a number of systems that help to maintain the vehicle's stability even in adverse driving conditions.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
65
Antilock Brake System ABS ABS prevents locking of the wheels during braking. Safe steering response is maintained even during full braking. Active safety is thus increased.
The ABS is operational every time you start the engine. Braking safely, refer to page 98.
Electronic brake-force distribution EBV The system controls the brake pressure in the rear wheels to ensure stable braking behavior.
Dynamic Brake Control DBC When you apply the brakes rapidly, this system automatically produces the maximum braking force boost and thus helps to achieve the short- est possible braking distance during full brak- ing. This system exploits all of the benefits pro- vided by ABS.
Do not reduce the pressure on the brake for the duration of the full braking application.
Dynamic Stability Control DSC DSC prevents the driving wheels from losing traction when you pull away from rest or accel- erate. The system also recognizes unstable driving conditions, for example if the rear of the car is about to swerve or if momentum is acting at an angle past the front wheels. In these cases, DSC helps the vehicle maintain a safe course within physical limits by reducing engine output and through braking actions at the indi- vidual wheels.
The laws of physics cannot be repealed, even with DSC. An appropriate driving
style always remains the responsibility of the driver. Therefore, do not reduce the additional safety margin again by taking risks, as this could result in an accident.<
Deactivating DSC
Press the button for at least 3 seconds; the indi- cator lamps for DSC in the instrument cluster light up. Dynamic Traction Control DTC and DSC have been simultaneously deactivated. Stabilizing and drive-output promoting actions are no longer executed.
In the same way as with a differential interlock, even if DSC is deactivated, brake actions are still performed on the rear axle to enhance drive output if the drive wheels experience a signifi- cant loss of traction.
To increase vehicle stability, activate DSC again as soon as possible.
Activating DSC Press the button again; the indicator lamps for DSC in the instrument cluster go out.
For better control If the indicator lamp flashes: DSC is regulating the drive and braking forces.
If the indicator lamps are on: DSC is deactivated.
Dynamic Traction Control DTC DTC is a version of DSC in which the drive out- put is optimized for particular road conditions, e.g. unplowed snow-covered roads. The sys- tem assures the maximal drive output, but with reduced driving stability. It is therefore neces- sary to drive with appropriate caution.
You may find it useful to briefly activate DTC under the following special circumstances:
T ec
h n
o lo
g y
fo r d
ri vi
n g
c o
m fo
rt a
n d
s af
et y
66
> When driving uphill on snow-covered roads, in slush or on unplowed, snow-covered roads
> When rocking a stuck vehicle free or start- ing off in deep snow or on loose ground
> When driving with snow chains
Activating DTC
Press the button; the indicator lamps for DTC in the instrument cluster come on.
For better control If the indicator lamp flashes: DTC is regulating the drive and braking forces.
If the indicator lamps are on: DTC has been activated.
Deactivating DTC Press the button again; the DTC indicator lamps in the instrument cluster go out.
Drive-off assistant The drive-off assistant enables you to drive off smoothly on uphill gradients. It is not necessary to use the parking brake for this.
1. Hold the car in place by depressing the brake.
2. Release the brake and drive off without delay.
The drive-off assistant holds the car in place for approx. 2 seconds after the
brake is released. Drive off without delay after releasing the brake. Otherwise, the drive-off
assistant will no longer hold the car in place after approx. 2 seconds and the car will start to roll backwards.<
Flat Tire Monitor FTM*
The concept The Flat Tire Monitor detects pressure loss in a tire by comparing the rotating speeds of the individual tires while moving.
In the event of pressure loss, the rolling circum- ference changes and, thus, the rotating speed of the affected wheel. This change is detected and is reported as a flat tire.
Functional requirement In order to assure the reliable reporting of a flat tire, the system must be initialized for the cor- rect tire inflation pressure.
The system must be reinitialized each time a tire inflation pressure has been cor-
rected or a wheel or tire has been changed.<
System limitations The Flat Tire Monitor is unable to warn the driver of sudden, severe tire damage
caused by external factors, nor can it identify the gradual loss of pressure that will inevitably occur in all four tires over a lengthy period of time.<
In the following situations, the system could be delayed or malfunction:
> System has not been initialized
> Driving on snowy or slippery road surface
> Performance-oriented style of driving: slip in the drive wheels, high lateral acceleration
> Snow chains are attached
Initializing the system The initialization is completed during driv- ing, which can be interrupted at any time.
When driving resumes, the initialization is con- tinued automatically. Do not initialize the system while snow chains are attached.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
67
1. Start the engine immediately before pulling away, but do not drive off yet.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the corre- sponding symbol appears in the display accompanied by the word "RESET".
3. Press button 2 to confirm your choice of the Flat Tire Monitor.
4. Press button 2 for approx. 5 seconds, until the reading shown below is displayed:
5. Start to drive. Initialization is completed while the car is on the move, without any feedback.
Indication of a flat tire The warning lamps come on in yellow and red. In addition, a signal sounds. There is a flat tire or substantial loss of tire pressure.
1. Cautiously reduce speed to below 50 mph/ 80 km/h. Avoid sudden braking and steer- ing maneuvers. Do not exceed a speed of 50 mph/80 km/h.
If the car is not equipped with Run- Flat Tires, refer to page 112, the stan-
dard equipment by design, do not continue
driving. A severe accident could result if you continue driving after a tire puncture.<
2. At the next opportunity, check the air pres- sure in all four tires.
If all four tires are inflated to the cor- rect pressures, the Flat Tire Monitor
might not have been initialized. The system must then be initialized.<
3. In the event of complete tire pressure loss, 0 psi/0 kPa, you can estimate the distance for which you can continue driving on the basis of the following guidelines:
> With a light load: 1 to 2 persons without luggage: approx. 155 miles/250 km
> With a medium load: 2 persons, cargo bay full, or 4 persons without luggage: approx. 90 miles/150 km
> With a full load: 4 persons, cargo bay full: approx. 30 miles/50 km
Drive cautiously and do not exceed a speed of 50 mph/80 km/h, otherwise
there is a risk of an accident. In the event of pressure loss, vehicle handling changes. This includes reduced tracking stability in braking, extended braking distance and altered natural steering characteristics. If unusual vibration or loud noises occur during the journey, this may be an indication that the damaged tire has finally failed. Reduce your speed and pull over as soon as possible at a suitable location. Otherwise parts of the tire could come loose, resulting in an accident. Do not continue driving. Instead, contact your BMW center.<
Malfunction The warning lamps come on in yel- low.The Flat Tire Monitor has a mal- function or has failed. Have the sys- tem checked as soon as possible.
T ec
h n
o lo
g y
fo r d
ri vi
n g
c o
m fo
rt a
n d
s af
et y
68
Tire Pressure Monitor TPM*
The concept TPM checks the inflation pressures of the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires.
Functional requirement In order to assure the reliable reporting of a flat tire, the system must be reset while all tire infla- tion pressures are correct.
Always use wheels with TPM electronics. Oth- erwise, the system may malfunction.
Each time a tire inflation pressure has been corrected or a wheel or tire has been
changed, reset the system.<
System limitations TPM cannot warn you in advance of sud- den severe tire damage caused by out-
side influences.<
The system does not work correctly if it has not been reset; for example, a flat tire may be indi- cated even though the tire inflation pressures are correct.
The system is inactive and cannot indicate a flat tire if a wheel without TPM electronics, such as a compact spare wheel, has been mounted, or if TPM is temporarily malfunctioning due to other systems or devices using the same radio fre- quency.
Resetting the system Each time a tire inflation pressure has been corrected or a wheel or tire has been
changed, reset the system.<
For operating principle refer to page 59.
1. Start the engine, but do not start driving.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the corre-
sponding symbol appears in the display accompanied by the word "RESET".
3. Press button 2 to confirm your choice of the Tire Pressure Monitor. The following dis- play appears:
4. Press button 2 for approx. 5 seconds, until the reading shown below is displayed:
5. Start to drive. After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be monitored. The system reset is completed during your drive, and can be interrupted at any time. When driving resumes, the reset is continued automati- cally. The indicator lamp goes out after the system reset is completed.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
69
Message for low tire inflation pressure The warning lamps come on in yellow and red. In addition, a signal sounds. There is a flat tire or substantial loss of tire pressure.
1. Cautiously reduce speed to below 50 mph/ 80 km/h. Avoid sudden braking and steer- ing maneuvers. Do not exceed a speed of 50 mph/80 km/h.
If the car is not equipped with Run- Flat Tires, refer to page 112, the stan-
dard equipment by design, do not continue driving. Otherwise a severe accident could result after a tire puncture if you continue driving.<
2. In the event of complete pressure loss, 0 psi/0 kPa, you can estimate the possible distance for continued driving on the basis of the following guidelines:
> With a light load: 1 to 2 persons without luggage: approx. 155 miles/250 km
> With a medium load: 2 persons, cargo bay full, or 4 persons without luggage: approx. 95 miles/150 km
> With a full load: 4 persons, cargo bay full: approx. 30 miles/50 km
Drive cautiously and do not exceed a speed of 50 mph/80 km/h. In the event of
pressure loss, vehicle handling changes. This includes reduced tracking stability in braking, extended braking distance and altered natural steering characteristics. If unusual vibration or loud noises occur during the journey, this may be an indication that the damaged tire has finally failed. Reduce your speed and pull over as soon as possible at a suitable location. Otherwise parts of the tire could come loose, resulting in an accident. Do not continue driving. Instead, contact your BMW center.<
Malfunction The small warning lamp flashes in yellow and then lights up continu- ously; the larger warning lamp comes on in yellow. No punctures can be
detected.
This type of message is shown in the following situations:
> If there is a malfunction Have the system checked.
> If a wheel without TPM electronics has been mounted
> If TPM is temporarily malfunctioning due to other systems or devices using the same radio frequency.
Message for unsuccessful system reset
The warning lamp lights up yel- low.The system is not reset after a tire has been changed, for example.
Check the tire inflation pressure and reset the system, refer to page 68.
Declaration according to NHTSA/ FMVSS 138 Tire Pressure Monitoring Systems Each tire should be checked monthly when cold and inflated to the inflation pressure recom- mended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire infla- tion pressure label, you should determine the proper tire inflation pressure for those tires. As an added safety feature, your vehicle has been equipped with a tire pressure monitoring sys- tem, TPMS, that illuminates a low tire pressure telltale when one or more of your tires are signif- icantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicles han-
T ec
h n
o lo
g y
fo r d
ri vi
n g
c o
m fo
rt a
n d
s af
et y
70
dling and stopping ability. Please note that the TPMS is not a substitute for proper tire mainte- nance, and it is the drivers responsibility to maintain correct tire pressure, even if underin- flation has not reached the level at which the TPMS low tire pressure telltale illuminates.
The TPMS malfunction indicator is combined with the low tire pressure telltale. When the sys- tem detects a malfunction, the telltale will flash for approximately one minute and then remain continuously lit. This sequence will continue upon subsequent vehicle startups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
Active steering*
The concept Active steering varies the turning angle of the front wheels in relation to steering wheel move- ments. It also varies the steering force required to turn the wheels depending on the speed at which you are driving.
When you are driving in the low road-speed range, e.g. in a town or when parking, the steer- ing angle increases, i.e. the steering becomes very direct, and less effort is required to turn the wheels. In the higher speed range, on the other hand, the steering angle is reduced more and more. This improves the handling capability of your BMW over the entire speed range.
In critical situations, the system can make tar- geted corrections to the steering angle pro- vided by the driver and thus stabilize the vehicle before the driver intervenes. This stabilizing
intervention is simultaneously deactivated when DSC is switched off, refer to page 65.
Malfunction The warning lamps come on. Active steering is no longer operational. At low speeds, greater steering wheel movements are required, whereas at
higher speeds the vehicle reacts more sensi- tively to steering wheel movements. The stabil- ity-enhancing feature may also be deactivated. Drive cautiously and think well ahead. Have the system checked.
Brake Force Display*
On the left: normal braking. On the right: sharp braking.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
71
Airbags
The following airbags are located under the marked covers:
1 Front airbags
2 Coupe: head airbags
3 Side airbags in the seat backrests
4 Convertible: knee airbags
Protective action Observe the adjustment instructions on page 35 to ensure the best possible per-
sonal protection.<
The front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot pro- vide adequate restraint. When needed, the head and side airbags help provide protection in the event of side impact. The relevant side air- bag supports the side upper body area. The head air bag supports the head.
The airbags have been designed to not be trig- gered in every collision situation, e.g. not in minor accidents or rear-end collisions.
Do not apply adhesive materials to the cover panels of the airbags, cover them or
modify them in any other way. Keep the dashboard and window on the front passenger side clear, i.e. do not cover with adhesive labels or coverings, and do not attach holders such as for navigation instruments and mobile phones. Do not attach seat covers, cushions or other objects not specifically approved for seats with integral side airbags to the front seats. Do not hang items of clothing such as coats or jackets over the backrests. Do not attempt to remove
the airbag retention system from the vehicle. Do not modify the individual components of the system or its wiring in any way. This includes the upholstered covers on the steering wheel, instrument panel, seats and roof posts, as well as the sides of the roof lining. Do not attempt to remove or dismantle the steering wheel. Do not touch the individual components imme- diately after the system has been triggered, because there is a danger of burns. In the event of malfunctions, deactivation or triggering of the airbag restraint system, have the testing, repair, removal and disposal of air- bag generators executed only by a BMW center or a workshop that works according to repair procedures of BMW with correspondingly trained personnel and that has the required explosives licenses. Unprofessional attempts to work on the system could lead to failure in an emergency or to undesired airbag activation, either of which could result in personal injury.<
Warning notices and information about the air- bags can also be found on the sun visors.
Automatic deactivation of the front passenger airbags An analysis of the impression in the front pas- senger seat cushion determines whether and how the seat is occupied. The front and side air- bags for the front passenger are activated or deactivated by the system accordingly.
The indicator lamp above the interior rearview mirror shows the current status
of the front passenger airbags, deactivated or activated, refer to Status of front passenger air- bags below.<
T ec
h n
o lo
g y
fo r d
ri vi
n g
c o
m fo
rt a
n d
s af
et y
72
Before transporting a child on the front passenger seat, read the safety precau-
tions and handling instructions under Trans- porting children safely, refer to page 44. The front and side airbags can also be deacti- vated by adolescents and adults sitting in cer- tain positions; the indicator lamp for the front passenger airbags comes on. In such cases, the passenger should change his or her sitting position so that the front passenger airbags are activated and the indicator lamp goes out. If the desired airbag status cannot be achieved by changing the sitting position, transport the rele- vant passenger on a rear seat. Do not attach seat covers, seat cushion padding, ball mats or other items to the front passenger seat unless they are specifically recommended by BMW. Do not place any items under the seat which could press against the seat from below. Other- wise a correct analysis of the seat cushion is not ensured.<
Status of front passenger airbags
The indicator lamp for the front passenger air- bags shows the functional status of the front passenger's front and side airbags in accor- dance with whether and how the front passen- ger seat is occupied. The indicator lamp shows whether the front passenger airbags are acti- vated or deactivated.
> The indicator lamp lights up when a child in a specially designated child-restraint sys- tem is detected, as intended, on the seat. The front and side airbags for the front pas- senger are not activated.
Most child seats are detected by the system, especially child seats
required by the NHTSA at the time of vehi-
cle production. After mounting a child seat, ensure that the indicator lamp for the front passenger airbag is lit. It indicates that the child seat has been detected and that the front passenger airbags are deactivated.<
> The indicator lamp does not come on as long as a person of sufficient size and in a correct sitting position is detected on the seat. The front and side airbags for the front pas- senger are activated.
> The indicator lamp does not come on if the seat is empty. The front and side airbags for the front pas- senger are not activated.
Operational readiness of airbag system
As of radio readiness, refer to page 47, the warning lamp comes on briefly to indicate that the entire airbag system and the belt tensioners are operational.
Airbag system malfunction > Warning lamp does not light up at radio
readiness or beyond.
> Warning lamp remains permanently on.
In the event of a fault in the airbag system, have it checked without delay, otherwise
there is the risk that the system will not function as intended even if a sufficiently severe acci- dent occurs.<
Convertible: rollover protection system The rollover protection system is activated automatically in the event of an accident, a crit-
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
73
ical driving situation, an extreme tilt in the car's longitudinal axis or upon loss of ground contact. The protection bars behind the rear head restraints deploy within fractions of a second.
As a supplementary system to the reinforced windshield frame, the rollover protection sys- tem ensures that the necessary headroom is maintained for all vehicle occupants.
Always keep the area of movement of the rollover protection system clear.
In minor accidents, you are protected by the fastened safety belt and, depending on acci- dent severity, by the safety belt tensioner and multi-phase airbag retention system.<
Resetting If the rollover protection system was not impacted after being automatically activated, it can be reset by lowering the protection bars to their original positions. This does not require tools.
1. Push the locking lever to one side and hold it there.
2. Push the protection bar halfway down from above.
3. Release the locking lever.
4. Push the protection bar down until it snaps into place.
5. Repeat the procedure for the other protec- tion bar.
Have the rollover protection system checked after an unexpected activation.
Never move the convertible top when the rollover protection system is in the acti-
vated position. Do not make any modifications to the individual components of the rollover protection system or its cabling. Work on the rollover protection system should only be performed by a BMW center. Incorrectly performed work on the system may lead to system failure or incorrect operation. To check the system and ensure flawless long- term operation, always observe the service intervals, refer to page 61.<
L am
p s
74
Lamps
Parking lamps/low beams
0 Lamps off, daytime running lamps
1 Parking lamps and daytime running lamps
2 Low beams, welcome lamps*
3 Automatic headlamp control*, daytime run- ning lamps*, welcome lamps* and Adap- tive Head Light*
When you open the driver's door with the igni- tion switched off, the exterior lighting is auto- matically switched off if the light switch is in position 0, 2 or 3.
Switch on the parking lamps if necessary, switch position 1.
Parking lamps In switch position 1, the front, rear and side vehicle lighting is switched on. You can use the parking lamps for parking.
The parking lamps will discharge the bat- tery. Therefore, do not leave them on for
unduly long periods of time, otherwise the bat- tery might not have enough power to start the engine. It is preferable to switch on the left- hand or right-hand roadside parking lamps, refer to page 76.<
Low-beam headlamps The low beams light up when the light switch is in position 2 and the ignition is on.
Automatic headlamp control* When the switch is in position 3, the low beams are switched on and off automatically depend- ing on ambient light conditions, e.g. in a tunnel, in twilight, or if there is precipitation. The Adap- tive Head Light* is active. The LED next to the symbol is illuminated when the low beams are on. You can also activate the daytime running lamps, refer to page 75. In the situations described above, the lamps then automatically switch from daytime running lamps to low beams.
The headlamps may also come on when the sun is sitting low on a blue sky.
The low beams remain switched on inde- pendent of the ambient lighting condi-
tions when you switch on the fog lamps*.<
The automatic headlamp control cannot serve as a substitute for your personal
judgment in determining when the lamps should be switched on in response to ambient lighting conditions. For example, the system cannot detect fog or hazy weather. To avoid safety risks, you should always switch on the low-beam headlamps manually under these conditions.<
Welcome lamps If you leave the light switch in position 2 or 3 when you park the car, the parking lamps and the interior lamps light up briefly when you unlock the vehicle.
Pathway lighting If you activate the headlamp flasher after park- ing the car, with the lamps switched off, the low beams come on and remain on for a certain time.
You can adjust the operating period or deacti- vate the function.
For operating principle refer to page 59.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
75
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
5. Press button 2.
6. Use button 1 to select:
> The function is deactivated.
> ... Select the corresponding duration, e.g. 40 seconds.
7. Press button 2. The setting is stored for the remote control currently in use.
Daytime running lamps* The daytime running lamps light up in switch position 0, 1 and 3. They are less powerful than the low beams.
Activating/deactivating daytime running lamps For operating principle refer to page 59.
1. Switch on the ignition, refer to page 47.
2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the sym- bol appears in the display accompanied by the word "SET".
3. Press button 2.
4. Lightly push button 1 in the turn indicator lever down repeatedly until the symbol appears in the display.
5. Press button 2.
6. Use button 1 to select:
> Daytime running lamps activated.
> Daytime running lamps deactivated.
7. Press button 2. The setting is stored for the remote control currently in use.
L am
p s
76
Adaptive Head Light*
The concept Adaptive Head Light is a variable headlamp control system that enables better illumination of the road surface. Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road.
In tight curves at speeds up to 40 mph/70 km/h, e.g. on mountainous roads or when turning, an additional, corner-illuminating lamp is switched on that lights up the inside area of the curve.
Activating Adaptive Head Light With the ignition switched on, turn the light switch to position 3, refer to page 74.
The corner-illuminating lamp is switched on automatically, depending on the steering wheel angle or turn signal indicator.
To avoid blinding oncoming traffic, the Adaptive Head Light directs light towards the front pas- senger side when the vehicle is at a standstill.
When you are reversing, only the corner-illumi- nating lamps are active and switched on on both sides.
Malfunction The LED next to the symbol for automatic head- lamp control flashes. Adaptive Head Light is malfunctioning or has failed. Have the system checked as soon as possible.
High beams/roadside parking lamps*
1 High beams
2 Headlamp flasher
3 Roadside parking lamps*
Roadside parking lamps, left or right* There is an additional option of switching on the lamps on the side of the car facing the road when parked.
Switching on After parking the vehicle, press the lever up or down beyond the pressure point for approx. 1 second, arrow 3.
The roadside parking lamps drain the bat- tery. Therefore, do not leave them on for
unduly long periods of time, otherwise the bat- tery might not have enough power to start the engine.<
Switching off Press the lever in the opposite direction to the pressure point, arrow 3.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
77
Fog lamps*
To switch on/off, press the button.
The parking lamps or low beams must be switched on for the fog lamps to operate. The green indicator lamp in
the instrument cluster lights up whenever the fog lamps are on.
The fog lamps are switched off while you acti- vate the headlamp flasher or switch on the high beams.
If the automatic headlamp control is acti- vated, the low beams will come on auto-
matically when you switch on the fog lamps.<
Instrument lighting You can adjust the brightness of the instrument lighting only when the parking lamps or the low beams are switched on.
1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol appears in the display, accompa- nied by the brightness level and the word "SET".
2. Press button 2.
3. Push button 1 up or down to select the desired brightness level.
4. Press button 2. The display again shows the outside tem- perature and the time.
Interior lamps The interior lamps, footwell lamps*, entry lamps*, cargo bay lamp and courtesy lamps* are controlled automatically.
The LEDs for the courtesy lamps are set in the door handles and illuminate the ground in front of the doors.
To avoid draining the battery, all lamps inside the car are switched off about
8 minutes after the ignition is switched off, refer to Start/stop button on page 47.<
Switching interior lamps on/off manually
Interior lamps, front and rear*: To switch on and off, press the button.
To switch off the interior lamps, footwell lamps*, entry lamps* and courtesy lamps* per- manently, press the button for the front interior lamps for about 3 seconds.
L am
p s
78
Reading lamps
There are reading lamps at the front and rear*, next to the interior lamps. To switch on and off, press the button.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
79
Climate
Equipment versions Depending on the equipment version, your vehicle contains either an air conditioner* or an automatic climate control system*.
1 Heating, air conditioner* 2 Automatic climate control*
Air vents 3 Airflow directed toward the windshield and
side windows
4 Air to the upper body area. The knurled wheels open and close the air supply continuously. The levers alter the direction of the airflow. For further details of draft-free ventilation, refer to page 81 or 84.
5 Air to the footwell
C lim
at e
80
Heating and ventilation, air conditioner*
1 Air distribution
2 Recirculated-air mode
3 Air flow rate
4 Cooling function* If the vehicle is not equipped with a cooling
function, the rear window defroster is located here.
5 Temperature
6 Rear window defroster If the vehicle is not equipped with a cooling function, this control is located at position 4.
Air distribution Direct the flow of air to the win- dows , to the upper body area
or to the footwell . Intermedi- ate settings are possible.
Recirculated-air mode If the air outside the car has an unpleasant odor or contains pollut- ants, shut off the supply to the interior of the car temporarily. The
system then recirculates the air currently within the vehicle. You can also activate/deactivate the recirculated-air mode by means of a button* on the steering wheel, refer to page 11.
If condensation starts to form on the inside window surfaces during operation
in the recirculated-air mode, you should switch it off while also increasing the air flow rate as required. The recirculated-air mode should not be used continuously for lengthy periods, otherwise the quality of the air inside the car will gradually deteriorate.<
Air flow rate Adjust the air flow rate. The higher the rate, the more effective the heating or cooling will be.
The air flow rate may be reduced or the blower may be switched off entirely to save on battery power. The display remains the same.
Switching the system on/off To switch on the system, set the desired air flow rate.
Turn the air flow rate rotary switch to 0. Blower and air conditioner are completely switched off and the air supply is cut off.
Switching the cooling function* on/off The cooling function cools and dehumidifies the incoming air before reheating it as required, according to the temperature set-
ting. This function is only available while the engine is running.
The cooling function helps prevent condensa- tion on the windows or removes it quickly.
Depending on the weather, the windshield may fog over briefly when the engine is started.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
81
Temperature To increase the temperature, turn the rotary switch clockwise towards red. To lower the temperature or to
cool* the interior, turn to the left towards blue.
Rear window defroster The defroster is switched off auto- matically after a certain time. Depending on your vehicle's equipment, the upper wires serve
as an antenna and are not part of the rear win- dow defroster.
Defrosting windows and removing condensation
1. Air distribution 1 in position .
2. Deactivate recirculated-air mode 2.
3. Airflow control 3 all the way to the right.
4. Switch on cooling function 4.
5. Temperature 5 to the right, red.
6. Switch on rear window defroster 6 to defrost the rear window .
Ventilation
1 Use the knurled wheels to smoothly open and close the air vents
2 Use the lever to change the direction of the airflow
Ventilation for cooling Adjust the vent outlets to direct the flow of cool air in your direction, for instance if it has become too hot in the car.
Draft-free ventilation Set the vent outlets so that the air flows past you and not straight at you.
Microfilter The microfilter removes dust and pollen from the incoming air. The microfilter is changed by your BMW center during routine maintenance work.
C lim
at e
82
Automatic climate control*
1 Air distribution, manual
2 Temperature, left side of passenger com- partment
3 Maximum cooling
4 AUTO program
5 Air flow rate, manual
6 Automatic recirculated-air control AUC/ Recirculated-air mode
7 Residual heat
8 Temperature, right side of passenger com- partment
9 Windows, defrosting and removing con- densation
10 Switching cooling function on/off manually
11 Rear window defroster
12 Air grill for interior temperature sensor please keep clear and unobstructed
Comfortable interior climate The AUTO program 4 offers the ideal air distri- bution and air flow rate for almost all conditions. All you need to do is select an interior tempera- ture which is comfortable for you.
The following sections inform you in detail about how to adjust the settings.
Most settings are stored for the remote control currently in use, refer also to Personal Profile settings on page 18.
Adjusting air distribution manually The air distribution can be switched on and off manually. The air is directed to the windshield, to the upper body area and to the
footwell. Automatic air distribution adjustment is deactivated. You can switch the automatic air distribution back on by pressing the AUTO button. This automatically switches on the cooling function as well.
Temperature Set the desired temperatures indi- vidually for the driver's and front passenger's sides.
The automatic climate control achieves this temperature as quickly as possi- ble regardless of the season, using maximum cooling or heating power if necessary, and then maintains it.
When you switch between different tem- perature settings in quick succession, the
automatic climate control does not have enough time to achieve the set temperature.<
You can achieve maximum heating power with the highest setting, regardless of the outside temperature.
The lowest setting effects continuous cooling.
Maximum cooling At outside temperatures above 327/06 and when the engine is running, you obtain a maximum cooling effect as soon as possible.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
83
The automatic climate control goes into recir- culated-air mode at the lowest temperature. Air flows at maximum rate from the vents for the upper body area. You should therefore open them for maximum cooling.
AUTO program The AUTO program adjusts the air distribution to the windshield and side windows, towards the upper
body area and into the footwell for you. The air flow rate and your temperature specifications will be adapted to outside influences as a result of seasonal changes, e.g. sunlight or window condensation.
The cooling is switched on automatically with the AUTO program.
Convertible program The Convertible program is active when the convertible top is open. In the Convertible pro- gram, the automatic climate control is opti- mized for driving with the convertible top down. In addition, the air flow rate is increased as vehi- cle speed increases.
The effectiveness of the Convertible pro- gram can be enhanced considerably by
installing the wind deflector.<
Adjusting air flow rate manually Press the left side of the button to reduce airflow. Press the right side of the button to increase it. You can
reactivate the automatic mode for the air flow rate with the AUTO button.
The air flow rate may be reduced or the blower may be switched off entirely to save on battery power. The display remains the same.
Switching the system on/off With the blower at its lowest setting, press the left side of the button to switch off the auto- matic climate control. All displays are cleared except for the rear window defroster if it is switched on. Press any button except REST or rear window
defroster to reactivate the automatic climate control.
The recirculated-air mode is switched on when you switch off the automatic cli-
mate control. If the air quality deteriorates or the window fogs over, switch the system back on and increase the air volume.<
Automatic recirculated-air control AUC/Recirculated-air mode
Switch on the desired operating mode by pressing this button repeatedly:
> LED off: outside air flows in continuously.
> Left-hand LED on, AUC mode: a sensor detects pollutants in the outside air. If nec- essary, the system blocks the supply of out- side air and recirculates the inside air. As soon as the concentration of pollutants in the outside air has decreased sufficiently, the system automatically switches back to outside air supply.
> Right-hand LED on, recirculated-air mode: the supply of outside air is permanently shut off. The system then recirculates the air currently within the vehicle.
If condensation starts to form on the inside window surfaces during operation
in the recirculated-air mode, you should switch it off while also increasing the air flow rate as required. The recirculated-air mode should not be used continuously for lengthy periods, otherwise the quality of the air inside the car will gradually deteriorate.<
Via the button* on the steering wheel You can use a button on the steering wheel, refer to page 11, to select between the different modes.
Residual heat The heat stored in the engine is used to heat the passenger com- partment, e.g. while stopped at a school to pick up a child.
C lim
at e
84
The function can be switched on when the fol- lowing conditions are met:
> Up to 15 minutes after the engine has been switched off
> While the engine is at operating tempera- ture
> As long as battery voltage is sufficient
> At an outside temperature below 777/ 256
The LED is lit when the function is on.
As of radio readiness, you can set the interior temperature, air flow rate and air distribution.
Windows, defrosting and removing condensation
Quickly removes ice and conden- sation from the windshield and front side windows.
Switch on the cooling function as well.
Switching cooling function on/off The cooling function cools and dehumidifies the incoming air before reheating it as required,
according to the temperature setting. This function is only available while the engine is running.
The cooling function helps prevent condensa- tion on the windows or removes it quickly.
Depending on the weather, the windshield may fog over briefly when the engine is started.
The cooling function is automatically switched on along with the AUTO program.
Rear window defroster The defroster is switched off auto- matically after a certain time. Depending on your vehicle's equipment, the upper wires serve
as an antenna and are not part of the rear win- dow defroster.
Ventilation
1 Use the knurled wheels to smoothly open and close the air vents
2 Use the lever to change the direction of the airflow
Ventilation for cooling Adjust the vent outlets to direct the flow of cool air in your direction, for instance if it has become too hot in the car.
Draft-free ventilation Set the vent outlets so that the air flows past you and not straight at you.
Microfilter/activated-charcoal filter The microfilter traps dust and pollen in the incoming air. The activated-charcoal filter pro- vides additional protection by filtering gaseous pollutants from the outside air. Your BMW cen- ter replaces this combined filter during routine maintenance.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
85
Practical interior accessories
Integrated universal remote control*
The concept The integrated universal remote control can replace as many as three hand-held transmit- ters for various remote-controlled devices, such as garage doors and gates or lighting sys- tems. The integrated universal remote control registers and stores signals from the original hand-held transmitters.
The signal of an original hand-held transmitter can be programmed on one of the three mem- ory buttons 1. After this, the programmed memory button 1 will operate the system in question. The LED 2 flashes to confirm trans- mission of the signal.
Should you sell your vehicle one day, be sure to delete the stored programs beforehand for your safety, refer to page 86.
To prevent possible damage or injury, before programming or using the inte-
grated universal remote control, always inspect the immediate area to make certain that no peo- ple, animals or objects are within the pivoting or travel range of the device being operated. Com- ply also with the safety instructions supplied with the original hand-held transmitter.<
Checking compatibility If this symbol appears on the package or in the instructions supplied with the original hand-held transmitter, you can
assume that the radio remote control device will be compatible with the integrated universal remote control.
For additional information, please contact your BMW center or call: 1-800-355-3515. You can also obtain information on the Internet at: www.bmwusa.com or www.homelink.com.
HomeLink is a registered trademark of Johnson Controls, Inc.
Programming
1 Memory buttons
2 LED
Fixed-code hand-held transmitters 1. Switch on the ignition, refer to page 47.
2. When starting operation for the first time: press the left and right memory buttons 1 for approx. 20 seconds until the LED 2 flashes rapidly. The three memory buttons are cleared.
3. Hold the original hand-held transmitter at a distance of approx. 4 to 12 in/10 to 30 cm from the memory buttons 1.
The required distance between the hand-held transmitter and the mem-
ory buttons 1 depends on the system of the respective original hand-held transmitter used.<
4. Simultaneously press the transmit key on the original hand-held transmitter and the desired memory button 1 on the integrated universal remote control. The LED 2 flashes slowly at first. As soon as the LED 2 flashes rapidly, release both buttons. If the LED 2 does not flash rapidly after approx. 15 sec- onds, alter the distance and repeat this step.
5. To program other original hand-held trans- mitters, repeat steps 3 and 4.
P ra
ct ic
al in
te ri
o r a
cc es
so ri
es
86
The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.
You can operate the device while the ignition is switched off.
If the device fails to function even after repeated programming, check whether
the original hand-held transmitter uses an alter- nating-code system. To do so, either read the instructions for the original hand-held transmit- ter or hold down the programmed memory button 1 of the integrated universal remote control. If the LED 2 on the integrated universal remote control flashes rapidly and then remains lit for about two seconds, the original hand-held transmitter uses an alternating-code system. If it uses an alternating-code system, program the memory buttons 1 as described under Alternating-code hand-held transmitters.<
Alternating-code hand-held transmitters To program the integrated universal remote control, consult the operating instructions for the device to be set. You will find information there on the possibilities for synchronization. When programming hand-held transmitters that employ an alternating code, please observe the following supplementary instructions:
Programming will be easier with the aid of a second person.<
1. Park your vehicle within the range of the remote-controlled device.
2. Program the integrated universal remote control as described above in the section Fixed-code hand-held transmitters.
3. Locate the button on the receiver of the device to be set, e.g. on the drive unit.
4. Press the button on the receiver of the device to be set. After step 4, you have approx. 30 seconds for step 5.
5. Press the programmed memory button 1 of the integrated universal remote control three times.
The corresponding memory button 1 is now programmed with the signal of the original hand-held transmitter.
If you have any questions, please contact your BMW center.<
Deleting all stored programs Press the left and right memory buttons 1 for approx. 20 seconds until the LED 2 flashes rap- idly: all stored programs are deleted.
Reassigning individual programs 1. Hold the original hand-held transmitter at a
distance of approx. 4 to 12 in/10 to 30 cm from the memory buttons 1.
The required distance between the hand-held transmitter and the mem-
ory buttons 1 depends on the system of the respective original hand-held transmitter used.<
2. Press the desired memory button 1 of the integrated universal remote control.
3. If the LED 2 flashes slowly after approx. 20 seconds, press the transmit key of the original hand-held transmitter. Release both buttons as soon as the LED 2 flashes rapidly. If the LED 2 does not flash rapidly after approx. 15 seconds, alter the distance and repeat this step.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
87
Digital compass*
1 Adjustment button
2 Display
The display shows you the main or secondary compass direction in which you are driving.
Operating principle You can call up various functions by pressing the adjustment button with a pointed object such as a pen or similar item. The following adjustment options are displayed one after the other, depending on how long you keep the adjustment button pressed:
> Press briefly: switch display on/off
> 3 to 6 seconds: set the compass zone
> 6 to 9 seconds: calibrate the compass
> 9 to 12 seconds: set left-hand/right-hand steering
> 12 to 15 seconds: setting the language
Setting compass zones Set the compass zone corresponding to your vehicle's geographic location so that the com- pass can function correctly; refer to the world map with compass zones.
To set the compass zone, press the adjustment button for approx. 3-4 seconds. The number of the compass zone set is shown in the display.
To change the zone setting, briefly press the adjustment button repeatedly until the display shows the number of the compass zone corre- sponding to your current location.
The compass is operational again after approx. 10 seconds.
P ra
ct ic
al in
te ri
o r a
cc es
so ri
es
88
Calibrating the digital compass The digital compass must be calibrated in the following situations:
> An incorrect compass direction is shown.
> The compass direction shown does not change although the direction of travel does.
> Not all compass directions are shown.
Procedure 1. Make sure that no large metal objects or
overhead power lines are in the vicinity of your vehicle and that you have enough space to drive in a circle.
2. Set the currently valid compass zone.
3. Convertible: ensure that the convertible top is fully closed.
4. Press the adjustment button for approx. 6-7 seconds to call up C. Then drive in at least one full circle at a speed of no more than 4 mph or 7 km/h. If calibration is successful, the display changes from C to a compass direction.
5. Convertible: open the convertible top fully and repeat step 4.
Setting right-hand/left-hand steering Your digital compass is factory-set to right- hand or left-hand steering, in accordance with your vehicle.
Setting the language You can set the language of the display:
Press the adjustment button for approx. 12-13 seconds. Briefly press the adjustment button again to switch between English, "E", and German, "O".
The setting is automatically saved after approx. 10 seconds.
Glove compartment
Opening
Pull the handle. The light in the glove compartment comes on.
To prevent injury in the event of an acci- dent while the vehicle is being driven,
close the glove compartment immediately after use.<
Closing Fold cover up.
Locking To lock the glove compartment, use the inte- grated key of the remote control, refer to page 18.
Center armrest*
Storage compartment The center armrest between the front seats contains a credit card holder and, depending on the equipment version, a compartment or a snap-in adapter*.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
89
Opening Press the button, see arrow.
Connection for external audio device You can connect an external audio device such as a CD or MP3 player and play audio tracks over the car's loudspeaker system. You can set the volume and tone by means of the car radio, refer to the separate Owner's Manual for Radio.
Connecting Lift up the center armrest.
Connection for audio playback: TRS connector 1/8 in/3.5 mm.
To play audio tracks over the car's loudspeaker system, connect the headset or line-out port of the external device to the connector.
Storage compartments inside the vehicle Compartments are located next to the steering column*, on the doors and in the center con-
sole. There are nets* on the front-seat backrests.
Compartment on the instrument panel*
To open: press the button.
Coupe: clothes hooks There are clothes hooks in the rear.
Items of clothing hung from the hooks must not obstruct the driver's view. Do
not hang heavy objects from the hooks, other- wise they could endanger the car's occupants, e.g. in case of heavy braking or sudden swerv- ing.<
Cup holders* Use lightweight and shatterproof contain- ers and do not transport hot beverages,
otherwise there is an increased risk of injury in the event of the accident. Do not force contain- ers that are too large into the cup holders, oth- erwise damage could result.<
There are two cup holders in the center con- sole.
P ra
ct ic
al in
te ri
o r a
cc es
so ri
es
90
You can mount an attachable cup holder* on the side of the center console.
Ashtray*
Opening
Push the ridge on the cover.
Emptying
Lift out the insert.
Lighter
With the engine running or the ignition switched on, press in the cigarette lighter.
The lighter can be pulled out as soon as it pops back out.
Hold or touch the hot cigarette lighter by the knob only. Holding or touching it in
other areas could result in burns. When leaving the car, always remove the remote control so that children cannot operate the cigarette lighter and burn themselves.<
Connecting electrical appliances In your BMW, when the engine is running or the ignition is switched on, you can use electrical devices such as a hand lamp, car vacuum cleaner, etc., up to approx. 200 watts at 12 volts, as long as one of the following sockets is available. Avoid damaging the socket by attempting to insert plugs of unsuitable shape or size.
Cigarette lighter socket* To access the socket: Open the ashtray at the front and pull out the lighter to use the socket.
In the cargo bay* To access the socket: Fold open the cover.
In the center console To access the socket, refer to Connection for external audio device on page 89.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
91
Coupe: through-loading system
Opening
1. To release the rear seat backrest, pull the corresponding lever in the cargo bay.
2. The unlocked rear seat backrest moves for- ward slightly. Fold the backrest forward by the head restraint.
Closing Return the rear seat backrest to its upright posi- tion and engage it.
When returning the backrest into its seat- ing position, make sure that the seat's
locking mechanism is properly engaged. Other- wise, cargo could be thrown around in the event of sharp braking or swerving and endanger the occupants.<
The lashing eyes in the cargo bay provide you with a way to attach cargo bay nets* or draw straps for securing suitcases and luggage, refer to page 99.
Convertible: cargo loading
Enlarging the cargo bay
When the convertible top is closed you can enlarge the cargo bay: To do so, fold the cargo bay partition upward.
Before opening the convertible top, pull the cargo bay partition down until it engages.
Ensure that pointed objects do not press against the cargo bay partition from below.
The convertible top can only be opened when the cargo bay partition is folded
down.<
Storage compartments inside the cargo bay Depending on your vehicle's equipment, the following storage spaces can be found in the cargo bay:
> Rubber strap* on the left trim panel for securing small objects such as a folding umbrella
> Net* for small objects on the right trim panel of the cargo bay
> Retaining straps* on cargo bay floor: for securing smaller objects or as an anti-slip surface when you place objects on the straps
The lashing eyes in the cargo bay provide you with a way to attach cargo bay nets* or draw straps* for securing suitcases and luggage, refer to page 100.
P ra
ct ic
al in
te ri
o r a
cc es
so ri
es
92
Coupe: ski bag* The ski bag is designed for safe, clean transport of up to 4 pairs of standard skis or up to 2 snowboards.
With the ski bag you can stow skis with a length of up to 6.6 ft/2.0 m. When skis of 6.6 ft/2.0 m length are loaded, the overall capacity of the ski bag is reduced due to its tapered design.
Loading Ensure that the skis are clean when they are loaded into the ski bag. Wrap sharp edges to prevent damage.
1. Fold down the center panel in the rear seat backrest.
2. Press the button, reach into the recess and fold down the cover. To stabilize the cover in the folded-down position, place the cen- ter panel underneath it.
3. Open the Velcro fastener, spread the ski bag between the front seats and insert the skis or snowboards. The zip fastener makes objects in the ski bag easier to reach.
4. Attach the hook of the ski bag retaining strap to the eyelet on the side of the ski bag opening.
Securing cargo
After loading, secure the ski bag and its con- tents. Tighten the retaining strap on the ten- sioning buckle for this purpose.
Secure the ski bag in the manner described, otherwise it could endanger
the car's occupants, e.g. in case of heavy brak- ing or sudden swerving.<
To store the ski bag, perform the steps described for loading in reverse order.
Removing the ski bag The ski bag can be completely removed, e.g. for faster drying or to allow you to use other inserts.
1. Fold down the center panel in the rear seat backrest.
2. Pull the handle, arrow 1.
3. Pull out the insert, arrow 2.
For more information on the various inserts available, contact your BMW cen-
ter.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
93
Convertible: through-loading opening with integrated transport bag*
The transport bag is designed for safe, clean transport of up to 4 pairs of standard skis or up to 2 snowboards.
With the transport bag you can stow skis up to a length of 6.6 ft /2.0 m. When skis of 6.6 ft/2.0 m length are loaded, the overall capacity of the ski bag is reduced due to its tapered design.
When using the transport bag, it is not permissible to transport passengers in
the rear seats.<
Loading 1. Pull the grip in the filler piece of the rear
backrest up and take out the filler piece.
2. Place the filler piece onto the seat cushion with the backrest side facing up.
3. In the cargo bay: press the two recesses together and fold down the cover.
4. Release the strap, lay out the transport bag between the front seats and load it. The zip fastener makes objects in the ski bag easier to reach.
Ensure that the skis are clean when you load them into the transport bag. Wrap sharp edges to prevent damage.
Securing cargo
After loading, secure the transport bag and its contents. Tighten the retaining strap on the tensioning buckle for this purpose.
Secure the transport bag in the manner described, otherwise it could endanger
the car's occupants, e.g. in case of heavy brak- ing or sudden swerving.<
To store the transport bag, perform the steps described for loading in reverse order.
Driving tips This section provides you with information
useful in dealing with specific driving and operating conditions.
T h
in g
s to
re m
em b
er w
h en
d ri
vi n
g
96
Things to remember when driving
Break-in period Moving parts need breaking-in time to adjust to each other. Please follow the instructions below in order to achieve the optimal service life and economy of operation for your vehicle.
Engine and differential Always obey all official speed limits.
Up to 1,200 miles/2,000 km Drive at varying engine and road speeds, but do not exceed an engine speed of 4500 rpm or a road speed of 100 mph/160 km/h.
Avoid full-throttle operation and use of the transmission's kick-down mode.
After driving 1,200 miles/2,000 km Engine and vehicle speeds can be gradually increased.
Tires Due to technical factors associated with their manufacture, tires do not achieve their full trac- tion potential until after an initial break-in period. Therefore, drive cautiously during the first 200 miles/300 km.
Brake system Brakes require an initial break-in period of approx. 300 miles/500 km to achieve optimized contact and wear patterns between brake pads and rotors. Drive cautiously during this break-in period.
Clutch The function of the clutch reaches its optimal level only after a distance driven of approx. 300 miles/500 km. During this break-in period, engage the clutch gently.
Following part replacement The same break-in procedures should be observed if any of the components mentioned above have to be renewed in the course of the vehicle's operating life.
Saving fuel The fuel consumption of your vehicle depends on several factors. You can lower fuel consump- tion and the environmental impact by taking certain measures, adjusting your driving style and having the vehicle serviced regularly.
Remove any unneeded cargo Additional weight increases fuel consumption.
Remove any mounted parts after you have finished using them Remove unneeded additional mirrors, the roof rack and the rear luggage rack after use. Mounted parts affect the vehicle's aerodynam- ics and increase fuel consumption.
Close the windows and glass roof An open glass roof or window causes higher air resistance and thus increases fuel consump- tion.
Check tire inflation pressure regularly Check the tire inflation pressure at least twice a month and before embarking on a long journey, and correct it if necessary.
Low tire inflation pressure causes higher rolling resistance and thus increases fuel consumption and tire wear.
Set off immediately Do not let the engine warm up while the car is still standing, but set off immediately at moder- ate engine speed. This is the fastest way for the cold engine to reach its operating temperature.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
97
Drive defensively Avoid unnecessary acceleration and braking maneuvers. To do so, keep an adequate dis- tance to the forward vehicle. A defensive and smooth driving style keeps fuel consumption down.
Avoid high engine speeds Only use first gear when setting off. In second and higher gears, accelerate without hesitation or pauses. When accelerating, shift up before reaching high engine speeds.
When you reach the desired speed, shift into the highest applicable gear and drive with the engine speed as low as possible and at a con- stant speed.
As a rule: driving at low engine speeds lowers fuel consumption and reduces wear.
Coasting When approaching a red light, take your foot off the accelerator and coast to a stop in the high- est applicable gear.
On a downhill slope, take your foot off the accel- erator and coast in a suitable gear.
The fuel supply is interrupted when coasting.
Switch off the engine during lengthy stops Switch off the engine when stopping for lengthy periods, e.g. at traffic lights, railroad crossings or in traffic congestions. You achieve fuel sav- ings even if standing time is as short as approx. 4 seconds.
Switch off functions you do not need at the moment Functions such as the air conditioner, seat heating or rear window defroster draw large amounts of power and consume additional fuel. Especially in city traffic and in stop-and-go driv- ing they have a considerable impact. Therefore, switch these functions off when they are not really needed.
Have the vehicle serviced Have the vehicle serviced regularly to achieve good economy and a long vehicle life. BMW recommends having the vehicle serviced at a BMW center. Also note the BMW service sys- tem, refer to page 118.
General driving notes
Close the luggage compartment lid Operate the vehicle only when the lug- gage compartment lid is closed. Other-
wise, exhaust fumes could enter the interior of the vehicle.<
If the vehicle must be driven with the luggage compartment lid open:
1. Close all windows and the glass roof.
2. Greatly increase the air volume of the heat- ing or automatic climate control system, refer to page 80 or 83.
3. Greatly increase the air volume of the auto- matic climate control system, refer to page 83.
Hot exhaust system In all vehicles, extremely high tempera- tures are generated in the exhaust sys-
tem. Do not remove the heat shields installed in its vicinity, and never apply undercoating to them. When driving, standing at idle and while parking, take care to avoid possible contact between the hot exhaust system and any highly flammable materials such as hay, leaves, grass, etc. Such contact could lead to a fire, with the risk of serious personal injuries and property damage. Do not touch hot exhaust tail pipes. Otherwise there is a risk of burns.<
Hydroplaning When driving on wet or slushy roads, reduce road speed. If you do not, a wedge
of water can form between tires and road sur- face. This situation, known as hydroplaning, means that the tire can completely lose contact
T h
in g
s to
re m
em b
er w
h en
d ri
vi n
g
98
with the road surface, so that neither the car can be steered nor the brake be properly applied.<
The risk of hydroplaning increases with declin- ing tread depth on the tires, refer also to Mini- mum tread depth on page 111.
Driving through water Drive through water on the road only if it is not deeper than 1 ft/30 cm, and then only
at walking speed at the most. Otherwise, the vehicle's engine, the electrical systems and the transmission may be damaged.<
Use the parking brake on inclines On inclines, do not hold the vehicle for a lengthy period using the clutch; use the
parking brake instead. Otherwise greater clutch wear will result.<
For more information about the drive-off assis- tant, refer to page 66.
Braking safely Your BMW is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations in which this is necessary. Since the vehicle maintains steering responsiveness, you can still avoid possible obstacles with a minimum of steering effort.
Pulsation of the brake pedal, combined with sounds from the hydraulic circuits, indicate that ABS is in its active mode.
Driving in wet conditions When roads are wet or there is heavy rain, briefly exert gentle pressure on the brake pedal every few miles. Monitor traffic conditions to ensure that this maneuver does not endanger other road users. The heat generated in this process helps dry the pads and rotors to ensure that full braking efficiency will then be available when you need it.
Hills To prevent overheating and the resulting reduced efficiency of the brake system,
drive long or steep downhill gradients in the
gear in which the least braking is required. Even light but consistent brake pressure can lead to high temperatures, brake wear and possibly even brake failure.<
You can increase the engine's braking effect by shifting down, all the way to first gear if neces- sary. This strategy helps you avoid placing excessive loads on the brake system. Down- shifting in manual mode of the automatic trans- mission, refer to page 50.
Never drive with the clutch held down, with the transmission in neutral or with
the engine switched off; otherwise, engine braking action will not be present or there will be no power assistance to the brakes or steering. Never allow floor mats, carpets or any other objects to protrude into the area around the pedals, otherwise pedal function could be impaired.<
Corrosion on brake rotors When the vehicle is driven only occasionally, during extended periods when the vehicle is not used at all, and in operating conditions where brake applications are less frequent, there is an increased tendency for corrosion to form on rotors, while contaminants accumulate on the brake pads. This occurs because the minimum pressure which must be exerted by the pads during brake applications to clean the rotors is not reached.
Should corrosion form on the brake rotors, the brakes will tend to respond with a pulsating effect that even extended application will fail to cure.
When the vehicle is parked Condensation forms while the automatic cli- mate control is in operation, and then exits under the vehicle. Traces of condensed water under the vehicle are therefore normal.
Before driving into a car wash General information on caring for your BMW can be found on page 120.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
99
With convenient access and automatic transmission Insert the remote control into the ignition switch. The engine can be switched off when the selec- tor lever is in position N. Refer also to page 27.
Cargo loading To avoid loading the tires beyond their approved carrying capacity, never over-
load the vehicle. Overloading can lead to over- heating and increases the rate at which damage develops inside the tires. This can ultimately result in a sudden blow-out.<
Make sure that no liquids are spilled or leak from their containers in the cargo
bay, as this could result in damage to the vehi- cle.<
Determining loading limit
1. Locate the following statement on your vehicle's placard*:
The combined weight of occupants and cargo should never exceed
XXX kg or YYY lbs. Otherwise, overloading can result in damage to the vehicle and unstable driving conditions.<
2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from XXX kilograms or YYY pounds.
4. The resulting figure equals the available amount of cargo and luggage load capacity.
For example, if the YYY amount equals 1,400 lbs. and there will be five 150-lb. pas- sengers in your vehicle, the amount of avail- able cargo and luggage load capacity is 650 lbs: 1,400 lbs. minus 750 lbs. = 650 lbs.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4.
6. If your vehicle will be towing a trailer, part of the load from your trailer will be transferred to your vehicle. Consult the manual for transporting a trailer to determine how this may reduce the available cargo and luggage load capacity of your vehicle.
Load
The permissible load is the total of the weight of occupants and cargo/luggage. The greater the weight of the occupants, the less cargo/lug- gage can be transported.
Stowing cargo
Coupe
T h
in g
s to
re m
em b
er w
h en
d ri
vi n
g
100
Convertible
> Position heavy objects as low and as far for- ward as possible, ideally directly behind the respective seat backrests.
> Cover sharp edges and corners.
> For very heavy cargo when the rear seat is not occupied, secure each safety belt in the opposite buckle.
Securing cargo
> Secure smaller and lighter items using retaining straps*, a cargo bay net* or draw straps*.
> Heavy-duty cargo straps* for securing larger and heavier objects are available at your BMW center. To attach the cargo straps, there are two lashing eyes, arrows 1, on the inside wall of the cargo bay. Depend- ing on your vehicle's equipment, there may be two additional lashing eyes, arrows 2,on the cargo bay sidewalls. Follow the information included with the cargo straps.
Always position and secure the cargo as described above, so that it cannot endan-
ger the car's occupants, for example if sudden braking or swerving is necessary. Never exceed either the approved gross vehicle
weight or either of the approved axle loads, refer to page 149, as excessive loads can pose a safety hazard, and may also place you in viola- tion of traffic safety laws. Heavy or hard objects should not be carried loose inside the car, since they could be thrown around, for example as a result of heavy braking, sudden swerves, etc., and endanger the occu- pants. Only attach the cargo straps using the lashing eyes shown in the illustration. Do not secure cargo with the anchors for tether straps, refer to page 45, otherwise these could be damaged.<
Coupe: roof-mounted luggage rack* A special rack system is available as an option for your BMW. Comply with the directions given in the installation instructions.
Mounting points
Fold open the cover.
Loading roof-mounted luggage rack Because roof racks raise the vehicle's center of gravity when loaded, they have a major effect on vehicle handling and steering response. You should therefore always remember not to exceed the approved roof load capacity, the approved gross vehicle weight or the axle loads when loading the rack.
You can find the applicable data under Weights on page 149.
The roof load must be distributed uniformly and should not be too large in area. Heavy items should always be placed at the bottom. Be sure
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
101
that adequate clearance is maintained for rais- ing the glass roof, and that objects do not project into the opening path of the luggage compartment lid.
Fasten roof-mounted cargo correctly and securely to prevent it from shifting or falling off during the trip.
Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gently.
Rear-mounted luggage rack* A rear-mounted luggage rack is available as a special accessory for your BMW. Comply with the directions given in the installation instruc- tions.
Mounting points
The mounting points are located under the pro- tective covers in the bumper.
Loading the rear-mounted luggage rack You should always remember not to exceed the approved roof load capacity, the approved gross vehicle weight or the axle loads when loading the rack.
You can find the applicable data under Weights on page 149.
Mobility This section helps you maintain your car's
mobility by supplying important information on vital topics including fuels and lubricants,
wheels and tires, service, maintenance and roadside assistance.
R ef
u el
in g
104
Refueling
Always switch off the engine before refu- eling, otherwise, fuel cannot be added to
the tank and a message will be displayed.<
Take all precautionary measures and observe all applicable regulations when
handling fuel. Do not carry any spare fuel con- tainers in your vehicle. They can develop a leak and cause an explosion or cause a fire in the event of an accident.<
Fuel filler door
Opening
1. Open fuel filler door. To do so, lightly press the rear edge.
2. Turn the gas cap counterclockwise.
3. Place the gas cap in the bracket attached to the fuel filler door.
Closing Fit the cap and turn it clockwise until you clearly hear a click.
Do not pinch the band attached to the cap, otherwise the cap cannot be closed
properly and fuel vapors can escape.<
The warning lamp lights up briefly if the gas cap is loose or missing. If this occurs, close the cap correctly.
Manually releasing the fuel filler door In the event of a malfunction, you can release the fuel filler door manually:
1. Remove the cover from the right-hand side- wall of the cargo bay.
2. Pull the button with the fuel pump symbol down. The fuel filler door is released.
Observe the following when refueling When handling fuels, follow the safety instructions provided at filling stations,
otherwise there is a risk of personal injury or property damage.<
When refueling, insert the filler nozzle com- pletely into the filler pipe. Avoid lifting the filler nozzle while filling the tank, as that would lead to
> premature pump shutoff
> reduced efficiency of the fuel-vapor recov- ery system.
The fuel tank is full when the filler nozzle clicks off the first time.
Fuel tank capacity Approx. 14 US gallons/53 liters, including the reserve capacity of 2.1 US gallons/8 liters.
Refuel as soon as possible once your cruising range falls below 30 miles/
50 km, otherwise engine functions are not ensured and damage can occur.<
Fuel specifications Do not fill the tank with leaded fuel, as this would cause permanent damage to the
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
105
catalytic converter. Do not fill the tank with E85, i.e. fuel containing 85% ethanol, nor with FlexFuel. Otherwise the engine and fuel supply system will be dam- aged.<
Required fuel
Super Premium Gasoline/AKI 91 This gasoline is highly recommended.
However, you may also use gasoline with less AKI. The minimum AKI Rating is:
> 128i: 87
> 135i: 89
If you use gasoline with this minimum AKI Rat- ing, the engine may produce knocking sounds when starting at high outside temperatures. This has no effect on the engine life.
Do not use any gasoline below the speci- fied minimum fuel grade. Otherwise the
engine could be damaged.<
Use high-quality brands Field experience has indicated significant dif- ferences in fuel quality: volatility, composition, additives, etc., among gasolines offered for sale in the United States and Canada. Fuels contain- ing up to and including 10 ethanol or other oxygenates with up to 2.8 oxygen by weight, that is, 15 MTBE or 3 methanol plus an equivalent amount of co-solvent, will not void the applicable warranties with respect to defects in materials or workmanship.
The use of poor-quality fuels may result in driveability, starting and stalling problems
especially under certain environmental condi- tions such as high ambient temperature and high altitude. Should you encounter driveability problems which you suspect could be related to the fuel you are using, we recommend that you respond by switching to a recognized high-quality brand such as gasoline that is advertised as Top Tier Detergent Gasoline. Failure to comply with these recommendations may also result in unscheduled maintenance.
W h
ee ls
a n
d ti
re s
106
Wheels and tires
Tire inflation pressures
Information for your safety It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pres- sure.
Check the tire inflation pressure regularly and correct it, if necessary: at least twice a
month and before starting long trips. If you fail to observe this precaution you may be driving on tires with incorrect tire pressures, a condi- tion that can not only compromise your vehi- cle's driving stability, but also lead to tire dam- age and the risk of an accident. Do not drive with deflated, i.e. flat tires, except when using Run-Flat Tires. A flat tire will seriously impair your vehicle's handling and braking response. Attempts to drive on a flat tire can lead to loss of control over the vehicle.<
Checking pressure Only check tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When tires are warm, the tire inflation pressure is higher.
After correcting the tire inflation pressure, reinitialize the Tire Pressure Monitor,
refer to page 68, or the Flat Tire Monitor, refer to page 66.<
Inflation pressure specifications The tables below provide all the correct inflation pressures for the specified tire sizes at ambient temperature.
The inflation pressures apply to the tire sizes approved and tire brands recom-
mended by BMW; a list of these is available from your BMW center.<
For correct identification of the right tire infla- tion pressures, observe the following:
> Tire sizes for your vehicle
> Load conditions
> Maximum allowable driving speed
Tire inflation pressures for driving up to 100 mph or 160 km/h For normal driving up to 100 mph or 160 km/h and to achieve optimum driving comfort, adjust pressures to the respective tire inflation pres- sures listed on the following pages in the col- umns for traveling speeds up to a maximum of 100 mph or 160 km/h.
These tire inflation pressures can also be found on the driver's-side door post when the driver's door is open.
The maximum permissible speed for these tire pressures is 100 mph or
160 km/h. Do not exceed this speed, otherwise tire damage and accidents could occur.<
Tire inflation pressures for driving above 100 mph or 160 km/h
In order to drive at maximum speeds in excess of 100 mph or 160 km/h, adjust
pressures to the respective tire inflation pres- sures listed on the following pages in the col- umns for traveling speeds including those exceeding 100 mph or 160 km/h. Otherwise tire damage and accidents could occur.<
Observe all national and local maximum speed limits, otherwise violations of the laws could occur.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
107
Coupe: tire inflation pressures for the 128i
Coupe: tire inflation pressures for the 135i
Tire size Pressure specifications in psi/kPa
Traveling speeds up to a max. of
100 mph / 160 km/h
Traveling speeds including those exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature
195/55 R 16 87 H M+S 32/220 38/260 32/220 35/240 35/240 42/290
205/55 R 16 91 H M+S 205/50 R 17 89 H M+S
32/220 35/240 32/220 35/240 35/240 42/290
Front: 205/50 R 17 89 V 32/220 - 32/220 - 35/240 -
Rear: 225/45 R 17 91 V - 35/240 - 35/240 - 42/290
Front: 215/40 R 18 85 Y 32/220 - 32/220 - 35/240 -
Rear: 245/35 R 18 88 Y - 36/260 - 35/240 - 42/290
More details on the permissible load and weights can be found on page 149.
Tire size Pressure specifications in psi/kPa
Traveling speeds up to a max. of
100 mph / 160 km/h
Traveling speeds including those exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature
205/50 R 17 89 H M+S 33/230 36/250 33/230 36/250 38/260 42/290
Front: 215/40 R 18 85 Y 36/250 - 36/250 - 38/260 -
Rear: 245/35 R 18 88 Y - 38/280 - 36/250 - 42/290
More details on the permissible load and weights can be found on page 149.
W h
ee ls
a n
d ti
re s
108
Convertible: tire inflation pressures for the 128i
Tire size Pressure specifications in psi/kPa
Traveling speeds up to a max. of
100 mph / 160 km/h
Traveling speeds including those exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature
without Sports package
205/55 R 16 91 H M+S 32/220 35/240 32/220 35/240 32/220 39/270
205/50 R 17 89 H M+S 32/220 38/260 32/220 35/240 35/240 42/290
Front: 205/50 R 17 89 V 32/220 - 32/220 - 35/240 -
Rear: 225/45 R 17 91 V - 35/240 - 35/240 - 41/280
Front: 215/40 R 18 85 Y 35/240 - 32/220 - 35/240 -
Rear: 245/35 R 18 88 Y - 39/270 - 35/240 - 41/280
with Sports package
205/55 R 16 91 H M+S 32/220 35/240 32/220 35/240 32/220 39/270
205/50 R 17 89 H M+S 32/220 38/260 32/220 35/240 35/240 42/290
Front: 205/50 R 17 89 V 32/220 - 33/230 - 38/260 -
Rear: 225/45 R 17 91 V - 36/250 - 36/250 - 45/310
Front: 215/40 R 18 85 Y 35/240 - 33/230 - 38/260 -
Rear: 245/35 R 18 88 Y - 41/280 - 36/250 - 44/300
More details on the permissible load and weights can be found on page 149.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
109
Convertible: tire inflation pressures for the 135i
Tire size Pressure specifications in psi/kPa
Traveling speeds up to a max. of
100 mph / 160 km/h
Traveling speeds including those exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in psi/kilopascal with cold tires. Cold = ambient temperature
205/50 R 17 89 H M+S 33/220 38/260 32/220 35/240 36/250 42/290
Front: 215/40 R 18 85 Y 39/270 - 39/270 - 39/270 -
Rear: 245/35 R 18 88 Y - 39/270 - 39/270 - 41/280
with Sports package
205/50 R 17 89 H M+S 33/220 38/260 32/220 35/240 36/250 42/290
Front: 215/40 R 18 85 Y 39/270 - 38/260 - 39/270 -
Rear: 245/35 R 18 88 Y - 41/280 - 38/260 - 45/310
More details on the permissible load and weights can be found on page 149.
W h
ee ls
a n
d ti
re s
110
Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires.
Tire size
Speed code letter Q = up to 100 mph or 160 km/h
T = up to 118 mph or 190 km/h
H = up to 131 mph or 210 km/h
V = up to 150 mph or 240 km/h
W = up to 167 mph or 270 km/h
Y = up to 186 mph or 300 km/h
Tire Identification Number Tires with DOT codes meet the guidelines of the US Department of Transportation.
DOT code:
Tire age The manufacturing date of tires is contained in the tire coding: DOT 3408 means that the tire was manufactured in week 34 of 2008.
BMW recommends that you replace all tires after 6 years at most, even if some tires may last for 10 years.
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:
Tread wear 200 Traction AA Temperature A
DOT Quality Grades Tread wear Traction AA A B C Temperature A B C
All passenger car tires must conform to Federal Safety Requirements in addition
to these grades.<
Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov- ernment test course. For example, a tire graded 150 would wear one and one-half (1) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, how- ever, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteris- tics and climate.
Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test sur- faces of asphalt and concrete. A tire marked C may have poor traction performance.
The traction grade assigned to this tire is based on straight-ahead braking traction
tests, and does not include acceleration, cor- nering, hydroplaning, or peak traction charac- teristics.<
Temperature The temperature grades are A, the highest, B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate
e.g.
Nominal width in mm Aspect ratio in Radial belt construction Rim diameter in inches Load rating, not on ZR tires Speed code letter, in front of the R on ZR tires
225/45 R 17 91 V
e.g.
Manufacturer's code for tire make Tire size and tire design Tire age
DOT xxxx xxx 3408
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
111
heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehi- cle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
The temperature grade for this tire is established for a tire that is properly
inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sep- arately or in combination, can cause heat buildup and possible tire failure.<
RSC Run-Flat Tires You will recognize Run-Flat Tires by a circular symbol containing the letters RSC on the side of the tire, refer to page 112.
M+S Winter and all-season tires. These have better winter properties than sum- mer tires.
XL Designation for specially reinforced tires.
Tire condition Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth.
Minimum tread depth The tire tread depth should not be below 1/8 in/ 3 mm. At tread depths below 1/8 in/3 mm there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface. The tread depth should not drop below 1/8 in/ 3 mm, although, for example, European legisla- tion only specifies a minimum tread depth of
1/16 in/1.6 mm. At tread depths below 1/8 in/ 3 mm there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface. When winter tires wear down past a tread depth of 1/6 in/4 mm, they become perceptibly less suitable for winter conditions. In the interest of safety, new tires should be installed.
Wear indicators in the base of the tread groove are distributed around the tire's circumference; the letters TWI, for Tread Wear Indicator, on the tire's sidewalls identify tires that incorporate these wear indicators. Once the tire tread has worn down to the wear indicators, the tire has worn to a depth of 1/16 in/1.6 mm.
Wheel/tire damage Please note that low-profile tires cause wheels, tires and suspension parts to be more suscep- tible to road hazard and consequential dam- ages.
Unusual vibrations encountered during normal vehicle operation can indicate tire failure or some other vehicle defect. This can, for exam- ple, be caused by driving over curbs. The same applies to any other abnormal road behavior, such as pulling severely to the right or left.
In these cases, reduce speed immedi- ately and have wheels and tires thor-
oughly checked. To do so, drive carefully to the nearest BMW center or tire shop that works according to BMW repair procedures with cor- respondingly trained personnel. If necessary, have the vehicle towed there. Otherwise, tire damage can pose a lethal hazard to vehicle occupants and other road users.<
W h
ee ls
a n
d ti
re s
112
Tire age For various reasons, such as the development of brittleness, BMW recommends tire replace- ment after no more than 6 years, regardless of the actual wear of the tires.
The manufacturing date of tires is contained in the tire coding: DOT ... 3408 means that the tire was manufac- tured in week 34 of 2008.
Run-Flat Tires
The symbol identifying Run-Flat Tires is a circle with the letters RSC on the sidewall. Run-Flat Tires comprise a conditionally self- supporting tire and a special rim. The reinforce- ment in the sidewalls ensures that the tire can continue to be used subject to certain restric- tions, even if depressurized.
For information on continuing to drive with a flat tire, refer to Indication of a flat tire on page 67.
New wheels and tires Have new wheels and tires installed only by your BMW center or tire shop that
works according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a dan- ger of subsequent damage and related safety hazards. Make sure that the new wheels are bal- anced.<
Retreaded tires BMW recommends that you do not use retreaded tires, since driving safety may
be impaired. The causes for this include poten- tially different tire casing structures and often wide variations in tire age, which can result in a limited service life.<
Correct wheels and tires When mounting new tires or changing over from summer to winter tires and vice versa, mount Run-Flat Tires for your own safety. In the event of a flat, no spare wheel is available. Your BMW center will be glad to advise you.
BMW recommends that you use only wheel and tire combinations that BMW
has tested and approved for your particular vehicle. Variations in factors such as manufac- turing tolerances mean that even wheels and tires with identical official size ratings could actually have different dimensions, which could lead to body contact and thus to severe acci- dents. If non-approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot guarantee their driving safety.<
You can inquire about the right wheel/tire com- bination at your BMW center.
The correct combination of wheels and tires is also necessary to ensure reliable operation of various vehicle systems such as ABS, DSC or FTM.
To maintain good handling and vehicle response, use only tires of a single brand and tread configuration. After a tire has been dam- aged, mount the previous wheel and tire combi- nation again as soon as possible.
Wheels with Tire Pressure Monitor TPM electronics When mounting new tires or changing over from summer to winter tires, or vice versa, only use wheels with TPM electronics; otherwise the Tire Pressure Monitor may not be able to detect a puncture, refer to page 69. Your BMW center will be glad to advise you.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
113
Recommended tire brands
Certain makes of tire are recommended by BMW for each tire size. They are marked with a clearly visible BMW designation on the sidewall of the tire. When properly used, these tires meet the high- est standards in terms of safety and handling characteristics.
Special characteristics of winter tires BMW recommends winter tires for winter roads or at temperatures below +457/+ 76. Although all-season M+S tires provide better winter traction than summer tires, they gener- ally fail to provide the same levels of cold- weather performance as winter tires.
Pay attention to speed Always comply with the speed limit for the winter tires mounted on your car; failure
to do so could result in tire damage and acci- dents.<
If the car is capable of speeds higher than that permitted for the winter tires, a label stating the maximum permitted speed for the mounted tires must be displayed in your field of view. Specialist tire dealers and your BMW center can supply these labels.
Storage Store wheels and tires in a cool, dry place with as little exposure to light as possible. Always protect tires against all contact with oil, grease and fuels.
Do not exceed the maximum tire inflation pres- sure indicated on the sidewall of the tire.
Swapping wheels between axles BMW advises against swapping wheels between the front and rear axles, even if all tires have the same size, as this could impair driving characteristics. If the tires are of mixed sizes, swapping wheels between the axles is not per- missible.
Snow chains* Only certain fine-link snow chains have been tested by BMW, classified as safe for use and recommended. Consult your BMW center for more information. Snow chains must be mounted in pairs and on the rear wheels only. Observe the manufacturer's instructions when mounting snow chains. Do not exceed a speed of 30 mph/50 km/h with chains.
Do not initialize the Flat Tire Monitor if snow chains are mounted, otherwise the
instrument might issue an incorrect reading. When driving with snow chains, you may find it helpful to activate DTC temporarily, refer to page 65.<
U n
d er
th e
h o
o d
114
Under the hood
Do not work on the car unless you pos- sess the necessary technical knowledge.
If you are unfamiliar with the statutory guide- lines, have any work on the vehicle performed only by a BMW center or by a workshop that work according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a danger of subsequent damage and related safety haz- ards.<
Hood
Releasing
Pull the lever.
Opening
To avoid damage, make sure that the wiper arms are against the windshield
before you open the engine compartment. Do not open the engine hood before the engine has cooled down, otherwise injuries may result.<
Press the release handle and open the hood.
Closing
Close the hood from a height of approx. 16 in/ 40 cm with momentum. It must be clearly heard to engage.
Make sure that the closing path of the hood is clear, otherwise injuries may
result. If you see any signs while driving your vehicle that the hood is not completely closed, stop at once and close it securely.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
115
Important parts of the engine compartment
1 Expansion tank for coolant, refer to page 117
2 Washer fluid filler neck for headlamp clean- ing system and window washer system, refer to page 53
3 Jump-starting connection, refer to page 131
4 Fluid filler neck for engine oil, refer to Add- ing engine oil, page 116
Engine oil The engine oil consumption is dependent on driving style and driving conditions.
Checking oil level Your car is equipped with an electronic oil-level monitor.
For a precise measurement and display of the oil level, it is necessary that the engine be at operating temperature, i.e. after uninterrupted driving for at least approx. 6.5 miles/10 km. You can have the oil level displayed while you are driving, or while the vehicle is at a standstill on a level surface and the engine is running.
You can have the oil level reading displayed in the instrument cluster.
1. Push button 1 in the turn indicator lever up or down repeatedly until the appropriate symbol is shown in the display, accompa- nied by the word "OIL".
2. Press button 2. The oil level is checked and the reading dis- played.
U n
d er
th e
h o
o d
116
Possible displays
1 Oil level OK
2 Oil level is being checked. This can take about 3 minutes if the car is at a standstill on a level surface, or about 5 minutes while the car is on the move.
3 Oil level down to minimum: Add engine oil as soon as possible, but no more than 1 US quart/1 liter, refer also to Adding engine oil on page 116.
4 Oil level is too high.
Too much oil will harm the engine. Have the vehicle checked without
delay.<
5 The oil level sensor is defective. Do not add engine oil. You can continue your journey. Note the newly calculated dis- tance remaining to the next oil service, refer to page 118. Have the system checked as soon as possible.
Adding engine oil
Do not add 1 US quart/1 liter of engine oil until the following warning lamp lights up in the instrument cluster or the oil level display reads "+1l".
Add oil within the next 125 miles/200 km, otherwise the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of children and comply with the relevant
warnings on the containers. Otherwise, health hazards may result.<
Oil change Have oil changed only at your BMW center or at a workshop that works according to BMW repair procedures with correspondingly trained personnel.
Specified engine oils The quality of the engine oil selected has critical significance for the operation and service life of an engine. BMW continuously approves spe- cific oils after confirming their suitability for use in its vehicles with extensive testing.
Do not use oil additives as these may cause engine damage.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
117
Only use approved BMW High Performance Synthetic Oil.
If BMW High Performance Synthetic Oil is not available, you can add small quantities of other synthetic oils in between oil changes. Only use oils with the API SM specification or higher.
Your BMW center will be glad to answer any questions regarding BMW High Per-
formance Synthetic Oil or approved synthetic oils.<
You can also call BMW of North America at 1-800-831-1117 or visit the website www.bmwusa.com to obtain this information.
Viscosity ratings Viscosity is a measure of an oil's flow rating and is categorized in SAE classes.
Selecting the appropriate SAE class depends on the regional climatic conditions in which you normally drive your BMW.
Approved oils belong to the 0W-40, 0W-30, 5W-40 and 5W-30 SAE
classes.<
These oils can be used for driving at all outside temperatures.
Coolant Do not add coolant to the cooling system when the engine is hot. Escaping coolant
can cause burns.<
Coolant consists of half water and half additive. Not all commercially available additives are suit- able for your BMW. Ask your BMW center for suitable additives.
Only use suitable additives, otherwise engine damage may result. Because
additives are harmful to your health, it is impor- tant to follow the instructions on the contain- ers.<
Comply with the appropriate environ- mental protection regulations when dis-
posing of coolant additives.<
Checking coolant level 1. Do not open the engine hood before the
engine has cooled down.
2. Turn the cap of the expansion tank a little counterclockwise to allow any accumulated pressure to escape, then continue turning to open.
3. The coolant level is correct if it is between the maximum and minimum marks in the filler neck, refer also to the diagram next to the filler neck.
4. If the coolant is low, slowly add coolant up to the specified level; do not overfill.
5. Turn the cap until there is an audible click.
6. Have the reason for the coolant loss elimi- nated as soon as possible.
M ai
n te
n an
ce
118
Maintenance
BMW Maintenance System
The BMW Maintenance System supports the preservation of the traffic and operating safety of your BMW. The objective is to optimize efforts with respect to minimal vehicle mainte- nance costs.
If and when you come to sell your BMW, a com- prehensive record of servicing will prove a sig- nificant benefit.
Condition Based Service CBS Sensors and special algorithms take the differ- ent driving conditions of your BMW into account. Condition Based Service uses this to determine the current and future service requirements. By letting you define a service and maintenance regimen that reflects your own individual requirements, the system builds the basis for trouble-free driving.
In the instrument cluster, you can have the remaining times or distances for selected main- tenance tasks and any legally prescribed dates displayed, refer to page 61:
> Engine oil
> Brake pads: separately for front and rear
> Brake fluid
> Vehicle check
> Legally mandated inspections depending on local regulations
Service data in the remote control Your vehicle continuously stores service- requirement information in the remote control while you are driving. Your BMW Service Advi- sor can read out this data from the remote con- trol unit, and propose an optimized mainte- nance approach. Whenever you take your car in for servicing you should therefore hand your BMW Service Advisor the remote control unit that you last used.
Make sure that the date in the instrument cluster is always set correctly, refer to
page 62; otherwise the effectiveness of Condi- tion Based Service CBS is not assured.<
Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models Please consult your Service and Warranty Infor- mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service require- ments.
BMW recommends that you have service and repair operations performed at your
BMW center. Take the time to ensure that these service pro- cedures are confirmed by entries in your vehi- cle's Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models. These entries verify that your vehicle has received the speci- fied regular maintenance.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
119
Socket for On-Board Diagnosis OBD
Primary components that make up exhaust emissions can be checked by a device via the OBD socket.
This socket is located on the driver's side to the left, on the bottom of the instrument panel underneath a cover.
Exhaust emission values The warning lamp lights up: The exhaust emission values have worsened. Have the car checked as
soon as possible.
Canadian models display this warning lamp.
The lamp flashes under certain conditions. This indicates excessive misfiring in the engine. If this happens, you should reduce your speed and visit your nearest BMW center as soon as possible. Severe engine misfiring can quickly lead to serious damage of emissions-related components, especially the catalytic converter.
The warning lamp comes on if the gas cap is not properly tightened and the OBD system assumes that fuel vapor
is escaping. If the gas cap is then tightened, the warning lamp should go out within a few days.
Event data recorders Your vehicle may be equipped with one or sev- eral measuring or diagnostic modules or a device for recording or sending certain vehicle data or information. In addition, if you have
signed a service contract for BMW Assist, cer- tain vehicle data may be transmitted or recorded in order to facilitate the corresponding services.
C ar
e
120
Care
Care products Regular cleaning and care contributes signifi- cantly to the value retention of your BMW.
BMW recommends cleaning and caring for your vehicle with products that are approved by BMW for this purpose.
Your BMW center will be happy to advise you on the products and services available for cleaning and caring for your BMW.
Original BMW CareProducts have been material tested, laboratory checked and
proven in the field, and offer optimal care and protection for your vehicle.<
Do not use cleaners that contain alcohol or solvents as these may result in dam-
age.<
Cleaning agents can contain substances that are dangerous or hazardous to your
health. Therefore, follow the warning and safety instructions on the packaging. When cleaning inside the vehicle, always open the doors or windows of the vehicle. In enclosed areas, pro- vide for sufficient ventilation. Only use products designed for cleaning vehicles.<
Exterior care
Washing the vehicle Especially during the winter months, ensure that the vehicle is washed more
frequently. Heavy soiling and road salt can lead to vehicle damage.<
After washing the vehicle, apply the brakes briefly to dry them, otherwise
water can reduce braking efficiency over the short term and brake discs can corrode.<
Automatic car washes Preference should be given to cloth car washes.
Do not use high-pressure car washes, otherwise water may drip into the vehicle
around the windows.<
Before driving into a car wash, ensure that it is suitable for your BMW. Check the following:
> Dimensions of your vehicle, refer to page 147.
> If necessary: fold in the exterior mirrors, refer to page 42
> Maximum permissible tire width
> In convertibles, do not treat the convertible top with wax. Ensure that a program is avail- able that does not apply wax or is designed specifically for convertibles.
Preparations before driving into an automatic car wash:
> Unscrew the rod antenna*.
> Deactivate the rain sensor* to prevent unin- tentional wiping.
> Remove additional attachments, e.g. spoiler or telephone antennas, if there is a possibility that they could be damaged.
Automatic transmission Before driving into an automatic car wash, per- form the following steps to ensure that the vehi- cle can roll:
1. Insert the remote control, even with conve- nient access, into the ignition lock.
2. Engage transmission position N.
3. Release the parking brake.
4. Switch off the engine.
5. Leave the remote control in the ignition lock so that the vehicle can roll.
Steam jets / high-pressure washers When using steam jets or high-pressure washers, ensure that you maintain suffi-
cient clearance to the vehicle and do not exceed a temperature of 1407/606. Insufficient clearance or excessive pressure or
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
121
temperature can lead to component damage or water penetration. Follow the operating instruc- tions for the steam jet or high-pressure washer.<
When using high-pressure washers, do not spray against the sensors and cam-
eras, e.g. of the Park Distance Control or Rear View Camera, for an extended period and main- tain a distance of at least 12 in/30 cm.<
Manual car wash When washing the vehicle by hand, use large quantities of water and car shampoo if neces- sary. Clean the vehicle with a sponge or wash- ing brush, applying light pressure only.
Before cleaning the windshield, deacti- vate the rain sensor or switch off the igni-
tion to prevent unintentional activation of the wipers.<
Observe local regulations pertaining to washing vehicles by hand.<
Headlamps Do not rub them dry and do not use abrasive or corrosive cleaning agents.
Remove contamination, such as insects, by soaking with shampoo or insect remover and then rinsing with plenty of water.
Thaw ice with a windshield de-icer and do not use an ice scraper.
Windows Clean the inside and outside surfaces of the windows and the mirrors with window cleaner.
Do not clean the mirrors with cleaners containing quartz.<
Wiper blades Clean with soapy water and replace regularly to avoid streaking.
Wax and preservative residue and con- tamination on the window can lead to
streaking when operating the windshield wip- ers, leading to premature wear of the wiper blades and causing the rain sensor to malfunc- tion.<
Convertible top care The appearance and life of the convertible top depend on proper care and operation.
Follow these instructions:
> Do not fold the convertible top into the con- vertible top box when the top is wet or fro- zen, as this may cause water spots, mold stains or chafed areas.
> If water spots occur on the inside headliner despite precautions, remove them using a microfiber cloth and interior cleaner.
> If the vehicle is parked in enclosed areas for extended periods, ensure that there is suffi- cient ventilation.
> Remove bird droppings immediately, as their corrosive ingredients attack the con- vertible top and damage the rubber seals.
To remove stains from the convertible top, do not use stain removers, paint thin-
ners, solvents, benzine or similar substances. These substances may damage the rubber parts. Improper care and cleaning may cause the convertible top and convertible top seams to become leaky.<
To remove heavy soiling, use a special convert- ible top cleaner. Follow the manufacturer's instructions for use.
After washing the convertible top three to five times, treat it with an impregnating agent.
Paintwork care Regular care contributes to value retention and protects the paintwork against the long-term effects of damaging substances.
Region-specific environmental influences can damage the vehicle paintwork. Therefore, it is important to adapt the frequency and scope of car care accordingly.
Immediately remove very aggressive sub- stances, e.g. spilled fuel, oil, grease, tree resin or bird droppings, to prevent damage to the paintwork.
C ar
e
122
Repairing paintwork damage Immediately repair scratches or similar damage, such as that caused by stones
hitting the vehicle, where necessary to prevent rusting.<
BMW recommends having paintwork damage repaired by a professional paint repair work- shop according to BMW specifications using original BMW paint materials.
Preservation A preservation treatment is necessary when water no longer beads off of the clean paintwork surface. Only use products for paintwork pres- ervation that contain carnauba or synthetic waxes.
Rubber seals Treat only with water or rubber care products.
Do not use silicon-containing care prod- ucts on rubber seals, otherwise noise and
damage could occur.<
Chrome parts Carefully clean vehicle parts, such as the radia- tor grill, door handles or window frames, with copious quantities of water and a shampoo additive. For additional treatment, use a chrome polish.
Light-alloy wheels For technical reasons, dust is generated during braking that is deposited on the light-alloy wheels. Remove the dust regularly using acid- free rim cleaner.
Do not use aggressive, acidic, strongly alkaline and abrasive cleaning agents or
steam jets over 1407/606, otherwise dam- age may occur.<
Outside sensors / cameras Keep the sensors and cameras on the outside of the vehicle, e.g. those of Park
Distance Control, clean and free of ice to ensure that they remain fully functional.<
Interior care
Upholstery / cloth trim Vacuum regularly with a vacuum cleaner to remove superficial dirt.
To treat severe stains, e.g. from beverages, use a soft sponge or lint-free microfiber cloth in combination with suitable interior cleaners. Fol- low the instructions on the packaging.
Clean the upholstery down to the seams using a sweeping motion. Avoid strong
rubbing.<
Opened Velcro fasteners on pants or other articles of clothing can damage the
seat covers. Ensure that Velcro fasteners are closed.<
Leather / leather trim The leather used by BMW is a high quality natural product. Slight irregularities in the
leather are a typical characteristic of natural leather.<
Dust and road grit in the pores and folds of the leather have an abrasive effect, leading to increased wear and causing the leather surface to become brittle prematurely. Therefore, fre- quently clean the leather of dust using a cloth or vacuum cleaner.
In particular, ensure that light-colored leather is cleaned regularly as it has a tendency to soil more easily.
Treat the leather twice a year using a leather lotion as dirt and grease will gradually attack the leather's protective layer.
Carpets / cargo bay You can vacuum the carpets and floor mats or clean them with interior cleaner if heavily soiled.
The floor mats can be removed for cleaning. When replacing the mats, ensure that the seat rails do not extend over the floor mats, as this may damage the mats.
Lint on the floor mats occurs for technical rea- sons and can be removed by vacuuming repeatedly.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
123
Interior plastic parts > Imitation leather surfaces
> Lamp glasses
> Display pane of instrument cluster
> Matt parts
Clean with water and solvent-free plastic cleaner if necessary.
Fine wood parts Clean fine wood trim and fine wood parts with a damp cloth. Wipe dry with a soft cloth.
Safety belts Do not clean with cleaning agents as these may destroy the fabric.<
Interior sensors / cameras To clean interior sensors and cameras, e.g. of the High-Beam Assistant, use a lint-free cloth moistened with glass cleaner.
Displays To clean the displays, e.g. of the radio or instru- ment cluster, use a display cleaning cloth or a soft, non-abrasive, lint-free cloth.
Avoid applying excessive pressure when cleaning the displays, otherwise damage
may occur.<
Do not use chemical or abrasive house- hold cleaning agents. Keep all types of
fluid away from the device. Otherwise, surfaces or electrical components may be corroded or damaged.<
CD/DVD drives Do not use a cleaning CD, as it may dam- age parts of the drive.<
Vehicle storage If your vehicle is to be decommissioned for longer than three months, your BMW center or a workshop that operates according to BMW specifications will be glad to advise you.
R ep
la ci
n g
c o
m p
o n
en ts
124
Replacing components
Onboard tool kit The onboard tool kit is stored below the floor mat in the cargo bay.
Wiper blades
1. Fold out the wiper arm and hold it.
2. Press together the locking spring, arrows 1, and fold out the wiper blade, arrow 2.
3. Take the wiper blade out of the catch mech- anism, pulling the blade toward the front.
To avoid damage, make sure that the wiper arms are against the windshield
before you open the engine compartment.<
Lamps and bulbs Lamps and bulbs make an essential contribu- tion to vehicle safety. They should, therefore, be handled carefully. BMW recommends hav- ing your BMW center perform any work that you do not feel competent to perform yourself or that is not described here.
Never touch the glass of new bulbs with your bare fingers, as even minute
amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base.<
You can obtain a selection of replacement bulbs at your BMW center.
When working on electrical systems, always begin by switching off the con-
sumer in question, otherwise short-circuits could result. To avoid possible injury or equip- ment damage when replacing bulbs, observe any instructions provided by the bulb manufac- turer.<
If the routine for changing a particular bulb is not described here, please contact
your BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.<
Light-emitting diodes LED Light-emitting diodes installed behind translu- cent lenses serve as the light source for many of the controls and displays in your vehicle. These light-emitting diodes, which operate using a concept similar to that applied in conventional lasers, are officially designated as Class 1 light- emitting diodes.
Do not remove the covers or expose the eyes directly to the unfiltered light source
for several hours, otherwise this could cause irritation to the retina.<
Xenon lamps* These bulbs have a very long service life and are highly unlikely to fail. If a xenon bulb fails never- theless, switch on the fog lamps and continue the journey with great care, provided that local legislation does not prohibit this.
Have any work on the xenon lamp system, including bulb replacements, performed
only by a BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel. Otherwise, if such work is carried out improperly, the high voltage in the system presents the danger of fatal injuries.<
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
125
Removing the headlamp cover 1. Pull the wire brackets over the notches, see
arrows, and fold to the side.
2. Fold away the headlamp cover.
Be careful when attaching the headlamp cover and ensure that both wire brackets
are securely in place, otherwise leaks could occur and cause damage to the headlamp sys- tem.<
Attach the headlamp cover in reverse order.
Halogen headlamps
Halogen low beams and high beams H7 bulb, 55 watts
Always wear gloves and eye protection; the atmosphere within the H7 bulb is
pressurized. Otherwise there is a risk of injury if the bulb is damaged.<
The figure shows the right-hand headlamp.
1 High beams
2 Low-beam headlamps
1. Remove the headlamp cover.
2. Fold down the holding bracket.
3. Remove and replace the bulb.
4. Reattach the bulb holder with the notch at the top.
5. Fold the holding bracket back up and let it snap into place.
6. Attach the headlamp cover.
Parking lamps, roadside parking lamps W5W bulb, 5 watts
1. Remove the headlamp cover.
The figure shows the right-hand headlamp.
2. Pull out the bulb holder.
3. Remove and replace the bulb.
4. Reinsert the bulb holder.
5. Attach the headlamp cover.
Xenon headlamps
Parking lamps, roadside parking lamps, daytime running lamps H8 bulb, 35 watts
The figure shows the right-hand headlamp.
1. Remove the headlamp cover.
2. Turn the bulb, see arrow, and remove it.
3. Pull off the connector and replace the bulb.
R ep
la ci
n g
c o
m p
o n
en ts
126
4. Attach the connector, insert the bulb and turn it all the way in the opposite direction.
5. Attach the headlamp cover.
Corner-illuminating lamps H3 bulb, 55 watts
The figure shows the right-hand headlamp.
1. Remove the top headlamp cover, using the screwdriver to push the detents to one side.
2. Turn the bulb holder, see arrow, and remove it.
3. Slide the bulb out of the holder and pull off the connector.
4. Replace the bulb and attach the connector.
5. Insert the bulb holder and turn it all the way in the opposite direction.
6. Attach the headlamp cover.
Turn signals, front PY21W Silver Vision bulb, 21 watts
The turn signal bulb can be changed via a cover in the wheel arch.
1. Turn the respective wheel inwards.
2. Using a coin, turn both locks of the cover all the way to the left, arrows 1, and remove the cover.
3. Turn the bulb holder to the left and remove it, arrow 2.
4. Apply gentle pressure to the bulb while turning it to the right for removal and replacement.
5. Insert the bulb holder and lock it by turning it to the right.
6. Attach the cover by positioning the bottom edge first and then turning both locks all the way to the right.
Tail lamps > Turn signal:
PY21W bulb, 21 watts
> Backup lamp: W16W bulb, 16 watts
> Brake lamps: P21W bulb, 21 watts
> Brake Force Display lamp: H21W bulb, 21 watts
1 Inner brake lamp
2 Outer brake lamp
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
127
3 Lateral reflector
4 Roadside parking lamp and tail lamp LED
5 Reflector
6 Turn signal
7 Backup lamp
8 Brake Force Display lamp
Replacing tail lamps
Outer brake lamp
The outer brake lamp can be accessed through a single socket.
The figure shows the right side of the vehicle.
1. Remove the cover from the panel of the cargo bay.
2. Turn the bulb holder to the left, see arrow, and remove it.
3. Apply gentle pressure to the bulb while turning it to the left for removal and replace- ment.
4. Attach the bulb holder and turn it all the way in the opposite direction.
5. Reattach the cover.
The roadside parking lamp/tail lamp uses LED design. After replacing the bulb,
ensure that the bulb holder is properly seated, otherwise the roadside parking lamp/tail lamp may not work.<
Inner brake lamp, turn signal, backup lamp and Brake Force Display lamp
The bulbs are integrated in a single bulb holder.
1. Remove the cover from the panel of the cargo bay.
2. Detach the bulb holder by pressing together the clips, see arrows, and remove it.
3. Brake lamps and turn signal: apply gentle pressure to the bulb while turning it to the left for removal and replacement.
4. Backup lamp: pull the bulb out of the socket and replace it.
5. Attach the bulb holder and let it snap into place.
6. Reattach the cover.
License plate lamps and center brake lamp These lamps use LED technology for operation. In the event of a malfunction, please contact your BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.
Changing wheels Your BMW is equipped with Run-Flat Tires as standard. This removes the need to change a wheel immediately in the event of a puncture.
For information on continuing to drive with a damaged tire, refer to Indication of a flat tire on page 67.
The symbol identifying Run-Flat Tires is a circle with the letters RSC on the sidewall, refer to Run-Flat Tires, page 112.
R ep
la ci
n g
c o
m p
o n
en ts
128
When mounting new tires or changing over from summer to winter tires and vice versa, mount Run-Flat Tires for your own safety. In the event of a flat, no spare wheel is available. Your BMW center will be glad to advise you. Refer also to New wheels and tires, page 112.
The tools for changing wheels are avail- able as optional accessories from your
BMW center.<
Jack mounting points
The jacking points are at the positions shown in the illustration.
Vehicle battery
Battery care The battery is 100% maintenance-free, the electrolyte will last for the life of the battery when the vehicle is operated in a temperate cli- mate. Your BMW center will be glad to advise in all matters concerning the battery.
Charging the battery Only charge the battery in the vehicle via the terminals in the engine compartment with the engine off. Connections, refer to Jump starting on page 131.
Disposal Have old batteries disposed of by your BMW center or hand them in to a recy-
cling center. Maintain the battery in an upright position for transport and storage. Always secure the battery against tipping over during transport.<
Power failure After a temporary power loss, the functioning of some equipment may be limited and require reinitialization. Individual settings may likewise have been lost and will have to be programmed:
> Time and date These values must be updated, refer to page 62.
> Radio Stations must be stored again, refer to the separate Owner's Manual for Radio.
> Glass roof It may happen that the roof can only be raised. The system must be initialized. Please contact your BMW center.
> Seat and mirror memory* The positions must be stored again, refer to page 39.
> Inside rearview mirror with digital compass The system must be calibrated, refer to page 88.
Fuses Never attempt to repair a blown fuse and do not replace a defective fuse with a sub-
stitute of another color or amperage rating, oth- erwise this could lead to a circuit overload, ulti- mately resulting in a fire in the vehicle.<
In the glove compartment
Accessing the fuse box:
1. Open the glove compartment.
2. Remove the damper, arrow 1, from the lower holder by applying forward pressure.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
129
3. Disengage the glove compartment by pressing on both tabs, arrows 2, and fold it down.
Spare fuses and a pair of plastic forceps are set in holders on the distributor box.
Information on fuse assignment can be found next to the distributor box.
After replacing a fuse, press the glove compart- ment upward until it engages and reattach the damper.
G iv
in g
a n
d re
ce iv
in g
a ss
is ta
n ce
130
Giving and receiving assistance
Emergency Request* Conditions for an Emergency Request:
> Full preparation package mobile phone: this equipment makes it possible to send an Emergency Request even if no mobile phone is paired with the vehicle.
> Radio readiness is on.
> BMW Assist is activated. Activating BMW Assist, refer to separate Owner's Manual.
> The BMW Assist system is logged on to a mobile phone network.
> The Emergency Request system is opera- ble.
Once your service contract for BMW Assist expires, the BMW Assist system can be deacti- vated by a BMW center without you having to visit a workshop. Once the BMW Assist system has been deactivated, Emergency Requests are not possible. The BMW Assist system can be reactivated by a BMW center after a new contract has been signed.
Sending an Emergency Request 1. Briefly press the cover flap to open.
2. Press the SOS button until the LED in the button lights up.
As soon as the voice connection to the BMW Assist Response Center has been established, the LED flashes.
Once the BMW Assist Response Center has received your Emergency Request, the
BMW Assist Response Center contacts you and takes further steps to help you. Even if you are unable to respond, the BMW Assist Response Center will be able to initiate further steps to assist you under certain conditions.
If the circumstances allow this, remain in the vehicle until the connection has been estab- lished. You will then be able to provide a detailed description of the situation.
Data for determining the necessary rescue measures are transmitted to the BMW Assist Response Center, e.g. the current position of your vehicle, if it can be determined.
If the LED is flashing but the BMW Assist Response Center cannot be heard over the hands-free system, it is possible that the hands-free system is malfunctioning. You may still be heard by the BMW Assist Response Center, however.
Under certain conditions, an Emergency Request is sent automatically immediately after a severe accident. This Automatic Collision Notification is not affected by the button being pressed.
For technical reasons, the Emergency Request service cannot be guaranteed
for the most unfavorable conditions.<
Roadside Assistance The BMW Roadside Assistance is there to assist you around the clock in the event of a breakdown, including on weekends and public holidays.
The phone numbers of the Roadside Assis- tance in your home country can be found in the Contact brochure.
First aid pouch* Some of the articles contained in the first aid pouch have a limited service life. Therefore,
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
131
check the expiration dates of the contents reg- ularly and replace any items in good time, if nec- essary.
The first aid pouch is located on the right-hand side of the cargo bay in a storage area.
Warning triangle*
The warning triangle is located in a holder in the luggage compartment lid. Press the tabs to take it out.
Jump starting If the car's own battery is flat, your BMW's engine can be started by connecting two jumper cables to another vehicle's battery. You can also use the same method to help start another vehicle. Only use jumper cables with fully-insulated clamp handles.
Do not touch any electrically live parts when the engine is running, or a fatal acci-
dent may occur. Carefully adhere to the follow- ing sequence, both to prevent damage to one or both vehicles, and to guard against possible personal injuries.<
Preparation 1. Check whether the battery of the other
vehicle has a voltage of 12 volts and approximately the same capacitance in Ah. This information can be found on the bat- tery.
2. Switch off the engine of the assisting vehi- cle.
3. Switch off any consumers in both vehicles.
There must not be any contact between the bodies of the two vehicles, otherwise
there is a danger of shorting.<
Connecting jumper cables Connect the jumper cables in the correct order to prevent sparking at the battery,
which could cause injury.<
Your BMW has a jump-starting connection in the engine compartment which acts as the bat- tery's positive terminal, refer also to the Engine compartment overview on page 115. The cap is marked with +.
1. Pull the cap of the BMW jump-starting con- nection up to remove.
2. Attach one terminal clamp of the plus/+ jumper cable to the positive terminal of the battery or a starting-aid terminal of the vehi- cle providing assistance.
3. Attach the second terminal clamp of the plus/+ jumper cable to the positive terminal of the battery or a starting-aid terminal of the vehicle to be started.
4. Attach one terminal clamp of the minus/ jumper cable to the negative terminal of the battery or to an engine or body ground of the assisting vehicle.
G iv
in g
a n
d re
ce iv
in g
a ss
is ta
n ce
132
Your BMW has a special nut as body ground or negative pole.
5. Attach the second terminal clamp of the minus/ jumper cable to the negative termi- nal of the battery or to the engine or body ground of the vehicle to be started.
Starting the engine 1. Start the engine of the donor vehicle and
allow it to run for a few minutes at slightly increased idle speed.
2. Start the engine on the other vehicle in the usual way. If the first start attempt is not successful, wait a few minutes before another attempt in order to allow the discharged battery to recharge.
3. Let the engines run for a few minutes.
4. Disconnect the jumper cables by reversing the above connecting sequence.
If necessary, have the battery checked and recharged.
Never use spray fluids to start the engine.<
Tow-starting, towing away Observe the applicable laws and regula- tions for tow-starting and towing vehi-
cles.<
Do not transport any passengers other than the driver in a vehicle that is being
towed.<
Using a tow fitting The screw-in tow fitting must always be carried in the car. It can be screwed in at the front or rear of the BMW.
It is stored with the onboard tool kit underneath the floor mat in the cargo bay, refer to page 124.
Use only the tow fitting provided with the vehicle and screw it all the way in. Use the
tow fitting for towing on paved roads only. Avoid lateral loading of the tow fitting, e.g. do not lift the vehicle by the tow fitting. Otherwise the tow fitting and the vehicle could be damaged.<
Access to screw thread Rectangular cover panel in bumper:
Press the arrow on the cover.
Front
Rear
Being towed Make sure that the ignition is switched on, refer to page 47, otherwise the low-beam
headlamps, tail lamps, turn signal indicators and windshield wipers may be unavailable. Power steering assistance is not available when the engine is not running. Thus, braking and steer- ing will require increased effort. Active steering
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
133
is not active and it will be necessary to turn the steering wheel further.<
Manual transmission Gearshift lever in neutral position.
Automatic transmission Selector lever in position N. Changing the selector lever position, refer to page 50.
Do not exceed a towing speed of 45 mph/ 70 km/h and a towing distance of
90 miles/150 km, otherwise the automatic transmission may be damaged.<
Towing methods Do not lift the vehicle by a tow fitting or body and chassis parts, otherwise dam-
age may result.<
With a tow bar The towing vehicle must not be lighter than the towed vehicle, otherwise it may
be impossible to maintain control.<
The tow fittings used should be on the same side on both vehicles. Should it prove impossi- ble to avoid mounting the tow bar at an angle, please observe the following:
> Clearance and maneuvering capability will be sharply limited during cornering.
> The tow bar will generate lateral forces if it is attached offset.
Attach the tow bar to the tow fittings only, as attaching it to other parts of the vehicle
could result in damage.<
With a tow rope When starting off in the towing vehicle, make sure that the tow rope is taut.
To avoid jerking and the associated stresses on vehicle components when
towing, always use nylon ropes or nylon straps. Attach the tow rope to the tow fittings only, as attaching it to other parts of the vehicle could result in damage.<
With a tow truck
Have the BMW transported with a tow truck with a so-called lift bar or on a flat bed.
Do not tow the vehicle with just the rear axle raised as this may cause the steering to turn.
Tow-starting Avoid tow-starting the vehicle whenever possi- ble; instead, jump-start the engine, refer to page 131. Vehicles with a catalytic converter should only be tow-started when the engine is cold, vehicles with an automatic transmission cannot be tow-started at all.
1. Switch on the hazard warning flashers, comply with local regulations.
2. Switch on the ignition, refer to page 47.
3. Shift into 3rd gear.
4. Have the vehicle tow-started with the clutch depressed all the way and slowly release the clutch. After the engine starts, immedi- ately depress the clutch completely again.
5. Stop at a suitable location, remove the tow bar or rope and switch off the hazard warn- ing flashers.
6. Have the vehicle checked.
In d
ic at
o r a
n d
w ar
n in
g la
m p
s
134
Indicator and warning lamps
Indicator and warning lamps can light up in a variety of combinations and colors. See the table for information on causes and how to react. Note whether a lamp comes on alone or in combination with another. Some lamps can light up in different colors. Corresponding dis- tinctions are made in the text.
1 2 Cause Special actions to be taken
Turn signals
High beams/headlamp flasher switched on
Fog lamps switched on
Fasten safety belts Fasten your safety belt, refer also to page 41.
Indication in US models
Parking brake applied Release the parking brake.
Indication in Canadian models
Parking brake applied Release the parking brake.
Outside temperature warning Drive cautiously, refer also to page 56.
Lights up briefly:
> Approx. 2.1 US gallons/8 liters of fuel remain in the tank
Remains on: Remaining operating range is no more than 30 miles/50 km, refer to page 57
Engine refuses to start Depress the brake or clutch in order to start the engine, refer to page 48.
Ignition switched on and driver's door open
Switch off the ignition, refer to page 47, or close the driver's door.
Parking lamps still on
Roadside parking lamps still on Switch off the roadside parking lamps, refer to page 76.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
135
Door open
Engine compartment lid open
Luggage compartment lid open
Lights up in red:
Convertible top not locked Automatic lock malfunctioning. Lock the convertible top manually, refer to page 32. Have it checked by your BMW center.
Electronic failure when closing con- vertible top
Close the convertible top manually, refer to page 32. Have it checked by your BMW center.
Lights up in yellow:
Cargo bay partition not in lowermost position. Convertible top cannot be moved
Fold the cargo bay partition down.
Vehicle speed too high for convertible top movement
Reduce speed to below 30 mph/ 50 km/h and continue convertible top movement.
Rollover protection system malfunc- tioning
Have the rollover protection system checked by your nearest BMW center.
Gas cap missing or loose Make sure that the gas cap is correctly positioned and close it until it audibly clicks. Do not jam the strap between the gas cap and the vehicle.
Windshield washer fluid level too low Add washer fluid as soon as possible, refer to page 53.
Lights up in red:
Service due Arrange a service appointment. Check service requirements, refer to page 61.
Lights up in yellow: The engine will start the next time the start/stop button is touched, possibly without the brake or clutch being depressed
1 2 Cause Special actions to be taken
In d
ic at
o r a
n d
w ar
n in
g la
m p
s
136
Remote control malfunctioning or, in cars with convenient access, not present
The engine cannot be started. Have the remote control checked, if necessary.
Battery of remote control discharged Use the remote control for a longer journey or, in cars with convenient access, replace the battery.
Belt tensioners and/or airbag system failed
Have the system checked immediately.
Active steering defective You can continue your journey. Steering characteristics are modified and steering wheel could be off-center. Have the system checked as soon as possible.
Steering assistance failed Markedly different steering response. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.
Lights up:
Emergency Request system has failed or is malfunctioning
Have the system checked as soon as possible.
Lights up in red:
Engine malfunction Stop the car and switch off the engine. You cannot continue your journey. Contact your BMW center.
Lights up in yellow:
Full engine power is no longer available You can continue your journey, but moderate your speed and exercise due caution. Have the engine checked as soon as possible.
Indication in US models:
Warning lamp flashes:
Engine malfunction under high load. High engine load will result in damage to the catalytic converter
You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked without delay.
Warning lamp comes on:
Engine malfunction with adverse effect on exhaust emissions
Have the car checked as soon as possi- ble.
1 2 Cause Special actions to be taken
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
137
Indication in Canadian models:
Warning lamp flashes:
Engine malfunction under high load. High engine load will result in damage to the catalytic converter
You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked without delay.
Warning lamp comes on:
Engine malfunction with adverse effect on exhaust emissions
Have the car checked as soon as possi- ble.
Lights up in red:
Engine overheating Carefully bring the car to a stop, switch off the engine and allow it to cool down. Do not open the hood, otherwise there would be a risk of injury by scalding. Contact your BMW center.
Lights up in yellow:
Engine too hot Continue driving at more moderate speed so that the engine can cool down. Have the engine checked with- out delay if the situation reoccurs.
Lights up in red:
Battery is no longer being charged. Alternator malfunction
Switch off all unnecessary electrical consumers. Have the vehicle's power supply system checked immediately.
Lights up in yellow:
Battery charge level very low, battery aged or not securely connected
Have the battery checked as soon as possible.
Engine oil pressure too low Stop immediately and switch off the engine. You cannot continue your jour- ney. Contact your BMW center.
Engine oil level too low Add engine oil immediately; refer to page 115 for more information.
Indication in US models: Parking brake applied
Indication in Canadian models: Parking brake applied
1 2 Cause Special actions to be taken
In d
ic at
o r a
n d
w ar
n in
g la
m p
s
138
Indication in US models
Lights up in red:
Brake fluid level too low Reduced braking effect, stop the car carefully. Contact your BMW center.
Lights up in yellow:
Drive-off assistant has failed. The car will not be held in place after the brake is released
Have the system checked as soon as possible.
Indication in Canadian models
Lights up in red:
Brake fluid level too low Reduced braking effect, stop the car carefully. Contact your BMW center.
Lights up in yellow:
Drive-off assistant has failed. The car will not be held in place after the brake is released
Have the system checked as soon as possible.
Indication in US models: Brake pads worn
Have the condition of the brake pads checked without delay.
Indication in Canadian models: Brake pads worn
Have the condition of the brake pads checked without delay.
Lights up in red: Have the system in question checked without delay.
> Starter failed or The engine cannot be restarted.
> ignition malfunctioning. Engine restart only possible when brake is depressed or
> lighting system failed. Low beams/ tail lamps and brake lamps still oper- ational. All other lamps failed
Depress the brake to restart the engine.
Lights up in yellow:
> Control of the brake lamps failed or
> fuel supply malfunctioning, or
> electrical system of trailer hitch* failed
You can continue your journey, but moderate your speed and exercise due caution. Have the system in question checked without delay.
Flashing: Dynamic Stability Control DSC or Dynamic Traction Control DTC is con- trolling drive and braking forces, refer also to page 65
1 2 Cause Special actions to be taken
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
139
Dynamic Traction Control DTC acti- vated, refer also to page 65
Dynamic Stability Control DSC and Dynamic Traction Control DTC deacti- vated, refer also to page 65
Driving stability limited during acceler- ation and cornering. You can continue your journey, but moderate your speed and exercise due caution.
Suspension control system failed, refer also to page 64
Driving stability limited during acceler- ation and cornering. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.
Indication in US models:
The driving stability control systems, including ABS and the Tire Pressure Monitor, have failed, refer also to page 64
Driving stability limited during acceler- ation and cornering. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.
Indication* in Canadian models:
The driving stability control systems, including ABS and the Flat Tire Monitor or Tire Pressure Monitor*, have failed, refer also to page 64
Driving stability limited during acceler- ation and cornering. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.
Indication* in Canadian models:
The driving stability control systems, including ABS and the Flat Tire Monitor or Tire Pressure Monitor*, have failed, refer also to page 64
Driving stability limited during acceler- ation and cornering. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked as soon as possible.
Indication in US models:
Vehicle electronics failed You cannot continue your journey. Contact your BMW center.
Indication* in Canadian models:
Vehicle electronics failed You cannot continue your journey. Contact your BMW center.
1 2 Cause Special actions to be taken
In d
ic at
o r a
n d
w ar
n in
g la
m p
s
140
Indication* in Canadian models:
Vehicle electronics failed You cannot continue your journey. Contact your BMW center.
Vehicles with Flat Tire Monitor*:
Light up in yellow and red:
> Tire is deflated Carefully bring the car to a stop. Com- ply with the additional information starting on page 66.
> Flat Tire Monitor not initialized Initialize Flat Tire Monitor, refer to page 66.
Light up in yellow:
Flat Tire Monitor failed. Punctures are not indicated
Have the system checked.
Vehicles with Tire Pressure Monitor*:
Light up in yellow and red:
> There is a flat tire or substantial loss of tire pressure
Carefully bring the car to a stop. Com- ply with the additional information starting on page 68.
Vehicles with Tire Pressure Monitor*:
Light up in yellow:
> Tire Pressure Monitor not initialized Check the inflation pressure and reset the system, refer to page 68.
The small lamp flashes in yellow and then lights up continuously; the larger lamp comes on in yellow:
> Tire Pressure Monitor has failed. Punctures are not indicated
Have the system checked. Comply with the additional information starting on page 69.
1 2 Cause Special actions to be taken
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
141
Lights up in red:
> Transmission limp-home program active with restricted range of gears, possibly with reduced acceleration.
You can continue your journey, but moderate your speed and exercise due caution. Have the system checked without delay.
Gears can be engaged without depressing the brake
Always depress the brake to engage a gear.
Lights up in yellow: Have the system checked as soon as possible.
> Automatic selector lever locked: Selector lever locked in position P with engine running and brake depressed or
Override the selector lever lock, refer to page 51.
> Brake signal malfunctioning: gear can be engaged without depressing the brake
Always depress the brake to engage a gear. Before leaving the vehicle, move the selector lever to position P and switch off the engine.
Lights up in red:
Transmission overheating Bring the car to a stop and move the selector lever to position P. Allow the transmission to cool down. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked if the situa- tion reoccurs.
Lights up in yellow:
Transmission too hot Avoid high engine loads. You can con- tinue your journey, but moderate your speed and exercise due caution.
Selector lever position P not engaged. Vehicle not prevented from rolling
Selector lever position P not engaged. Ignition cannot be switched off
Engage selector lever position P when you wish to switch off the ignition, refer to page 47.
Pinch protection system of the power windows malfunctioning
Have the system checked.
Pinch protection system of the electric glass roof malfunctioning
Have the system checked.
Cruise control system failed You can continue your journey. Have the system checked.
1 2 Cause Special actions to be taken
In d
ic at
o r a
n d
w ar
n in
g la
m p
s
142
Park Distance Control failed Have the system checked.
Bulb of exterior lighting system failed Have the exterior lighting checked as soon as possible.
Low-beam headlamp or fog lamp failed Have the low beams checked as soon as possible.
High-beam headlamp failed Have the high-beam headlamps checked.
Headlamp beam throw adjustment system failed
Have the headlamp beam throw adjust- ment system checked.
Adaptive Head Light failed
Coolant level too low Add coolant immediately, refer to page 117.
Lights up in red:
Service appointment overdue Arrange a service appointment. Check service requirements, refer to page 61.
Lights up in yellow:
Service due Arrange a service appointment. Check service requirements, refer to page 61.
No service due
Set speed limit* has been exceeded
Time and date no longer correct Set the time and date, refer to page 62.
1 2 Cause Special actions to be taken
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
143
Reference This chapter contains technical data and an
index that will help you find information most quickly.
T ec
h n
ic al
d at
a
146
Technical data
Engine data
128i 135i
Displacement cu in/cm 182.8/2,996 181.8/2,979
Number of cylinders 6 6
Maximum power output hp 230 300
at engine speed rpm 6,500 5,800
Maximum torque lb ft/Nm 200/270 300/407
at engine speed rpm 2,750 1,400 - 5,000
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
147
Dimensions
Coupe
All dimensions given in inches/mm. Smallest turning circle dia.: 35 ft 1 in/10.7 m.
T ec
h n
ic al
d at
a
148
Convertible
All dimensions given in inches/mm. Smallest turning circle dia.: 35 ft 1 in/10.7 m.
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
149
Weights
Coupe
Convertible
128i 135i
Approved gross weight
> with manual transmission lbs/kg 4,134/1,875 4,255/1,930
> with automatic transmission lbs/kg 4,211/1,910 4,266/1,935
Load lbs/kg 794/360 794/360
Approved front axle load lbs/kg 2,028/920 2,116/960
Approved rear axle load
> with manual transmission lbs/kg 2,249/1,020 2,249/1,020
> with automatic transmission lbs/kg 2,393/1,040 2,393/1,040
Approved roof load capacity lbs/kg 165/75 165/75
Cargo bay capacity cu ft/liters 13.1/370 13.1/370
128i 135i
Approved gross weight
> with manual transmission lbs/kg 4,398/1,995 4,564/2,070
> with automatic transmission lbs/kg 4,475/2,030 4,575/2,075
Load lbs/kg 772/350 772/350
Approved front axle load lbs/kg 2,050/930 2,149/975
Approved rear axle load lbs/kg 2,467/1,119 2,469/1,120
Approved roof load capacity lbs/kg
Cargo bay capacity cu ft/liters 9.1 - 10.7/260 - 305 9.1 - 10.7/260 - 305
T ec
h n
ic al
d at
a
150
Capacities
Notes
Fuel tank: US gal/liters approx. 14.0/53 Fuel grade: page 105
including reserve of US gal/liters approx. 2.1/8.0
Window washer system For more details: page 53
including headlamp washers US qt/liters approx. 6.3/6.0
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
151
E ve
ry th
in g
fr o
m A
to Z
152
Everything from A to Z
Index
A ABS Antilock Brake
System 64 Accessories, refer to The
individual vehicle 5 Accident, reporting, refer to
Emergency Request 130 Activated-charcoal filter 84 Active steering 70 Adaptive Head Light 76 Additives coolant 117 engine oil 116 Airbags 71 sitting safely 35 warning lamp 72 Air conditioner 79 Air distribution automatic 83 individual 80 Air flow rate 80, 83 Airing, refer to
Ventilation 81, 84 Air outlets, refer to Air
vents 79 Air pressure, checking, refer
to Tire inflation pressure 106
Air recirculation, refer to Recirculated-air mode 80, 83
Air vents 79 AKI, refer to Fuel
specifications 104 Alarm system 24 avoiding unintentional
alarms 25 interior motion sensor 25 switching off an alarm 25 tilt alarm sensor 25 All-season tires, refer to
Winter tires 113
Ambient air, refer to Recirculated-air mode 80, 83
Antifreeze coolant 117 washer fluid 53 Antilock Brake System
ABS 64 Anti-theft alarm system, refer
to Alarm system 24 Anti-theft system 19 Approved axle loads, refer to
Weights 149 Approved gross vehicle
weight, refer to Weights 149 Armrest, refer to Center
armrest 88 Ashtray 90 Assistance systems, refer to
Dynamic Stability Control DSC 65
AUC Automatic recirculated- air control 83
Automatic air distribution 83 air flow rate 83 cruise control 54 headlamp control 74 Automatic car wash, refer to
Car wash 98 Automatic car washes 120 Automatic climate control 79 automatic air distribution 83 Automatic curb monitor 42 Automatic lamps refer to Welcome lamps 74 Automatic recirculated-air
control AUC 83
Automatic transmission with Steptronic 49
interlock 50 selector lever lock 50 shiftlock 50 towing 132 tow-starting 132 AUTO program for automatic
climate control 83 Average fuel consumption 58 setting the units 60 Average speed 58 Avoiding unintentional
alarms 25 Axle loads, refer to
Weights 149
B Backrests, refer to Seats 36 Backrest width adjustment 37 Back seats, refer to Rear seats adjusting head restraints 38 Backup lamp, replacing
bulb 127 Bag for skis, refer to Ski
bag 92 Band-aids, refer to First-aid
pouch 130 Bar, refer to Tow-starting,
towing away 133 Battery 128 charging 128 disposal 27, 128 jump starting 131 temporary power failure 128 Battery renewal remote control for vehicle 27 Being towed 132 Belts, refer to Safety belts 41 Belt tensioner, refer to Safety
belts 41
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
153
Beverage holders, refer to Cup holders 89
Blower, refer to Air flow rate 80, 83
BMW car shampoo 123 BMW Maintenance
System 118 Bottle holders, refer to Cup
holders 89 Brake assist, refer to Dynamic
Brake Control 65 Brake fluid service requirements 61 Brake Force Display 70 Brake lamps Brake Force Display 70 replacing bulb 127 Brake pads, breaking in 96 Brake rotors 98 brakes 96 breaking in 96 Brakes ABS 65 BMW Maintenance
System 118 braking safely 98 breaking in 96 parking brake 49 service requirements 61 Brake system 96 BMW Maintenance
System 118 breaking in 96 disc brakes 98 Breakdown services, refer to
Roadside Assistance 130 Breaking in the clutch 96 Break-in period 96 Bulb changing, refer to Lamps
and bulbs 124 Bulbs, changing 124 Button for starting the
engine 47 Buttons on the steering
wheel 11
C California Proposition 65
warning 6 Can holders, refer to Cup
holders 89 Capacities 150 Capacity of the cargo bay 149 Car battery, refer to Vehicle
battery 128 Car care, refer to Care 120 Care 120 automatic car washes 120 care products 120 carpets 122 CD/DVD drives 123 chrome parts 122 convertible top 121 displays 123 exterior 120 fine wood parts 123 headlamps 121 high-pressure washer 120 interior 122 leather 122 light-alloy wheels 122 paintwork 121 plastic parts 123 rubber seals 122 safety belts 123 sensors and cameras 123 upholstery and cloth
trim 122 washing the car
manually 121 windows 121 wiper blades 121 Cargo, securing 100 Cargo bay capacity 149 convenient access 27 enlarging, refer to Through-
loading system 91 lamp, refer to Interior
lamps 77 lid, refer to Luggage
compartment lid 23 opening from outside 23
Cargo bay lid, refer to Luggage compartment lid 23
Cargo bay net, refer to Securing cargo 100
Cargo loading 99 securing cargo 100 stowing cargo 99 vehicle 99 Car jack jacking points 128 Car key, refer to Integrated
key/remote control 18 Car phone installation location, refer to
Center armrest 88 refer to separate Owner's
Manual Car shampoo 123 Car wash 98 Catalytic converter, refer to
Hot exhaust system 97 Center armrest 88 Center brake lamp, replacing
bulb 127 Center console, refer to
Around the center console 14
Central key, refer to Integrated key/remote control 18
Central locking from inside 22 from outside 19 Central locking system 19 convenient access 26 Changes, technical, refer to
For your own safety 5 Changing wheels 127 Chassis number, refer to
Engine compartment 115 Check Control 62 Checking oil level 115 Child-restraint fixing system
LATCH 45 Child-restraint systems 44 Child seats 44 Chrome parts 123 Chrome polish 123 Cigarette lighter 90
E ve
ry th
in g
fr o
m A
to Z
154
Cleaning headlamps 53 washer fluid 53 Cleaning your BMW, refer to
Care 120 Clock 56 12h/24h format 60 setting time 62 Closing from inside 22 from outside 19 Clothes hooks 89 Cold start, refer to Starting the
engine 48 Combination instrument, refer
to Instrument cluster 12 Comfort access, refer to
Convenient access 26 Comfort area, refer to Around
the center console 14 Compartment for remote
control, refer to Ignition lock 47
Compass 87 Computer 57 Condensation, refer to When
the vehicle is parked 98 Condition Based Service
CBS 118 Configuring settings, refer to
Personal Profile 18 Confirmation signals for
locking/unlocking the vehicle 21
Connecting vacuum cleaner, refer to Connecting electrical appliances 90
Consumption, refer to Average fuel consumption 58
Controls and displays 10 Convenient access 26 replacing the battery 27 Convenient operation windows 20 windows with convenient
access 26 with convenient access 26 Convenient starting, refer to
Starting the engine 48
Convertible rollover protection
system 72 top 30 wind deflector 33 Convertible top convenient opening 20 Convertible top care 121 Coolant 117 checking level 117 filling 117 Coolant temperature 57 Cooling, maximum 82 Cooling fluid, refer to
Coolant 117 Copyright 2 Corner-illuminating lamps 76 Corner-illuminating lamps,
refer to Adaptive Head Light 76
Cornering lamps, refer to Adaptive Head Light 76
Courtesy lamps 77 Cruise control 54 Cruising range 58 Cup holders 89 Curb weight, refer to
Weights 149 Current fuel consumption 58
D Dashboard, refer to
Cockpit 10 Dashboard lighting, refer to
Instrument lighting 77 Data dimensions 147 sizes 147 Data, technical 146 capacities 150 engine 146 weights 149 Date setting 62 setting format 60 Daytime running lamps,
switch positions 75
DBC Dynamic Brake Control 65
Deactivating front passenger airbags 71
Deadlocking, refer to Locking 20
Decommissioning the vehicle, refer to Caring for your vehicle
Defect door lock 22 fuel filler door 104 glass roof 30 Defogging windows 81, 84 Defrosting the
windows 81, 84 Defrosting windshield, refer to
Defrosting windows 81, 84 Defrost position, refer to
Defrosting windows 81, 84 Differential, breaking in 96 Digital clock 56 Digital compass 87 Dimensions 147 Directional indicators, refer to
Turn signals 51 Displacement, refer to Engine
data 146 Display lighting, refer to
Instrument lighting 77 Displays, refer to Instrument
cluster 12 Displays and controls 10 Disposal of coolant 117 remote control battery 27 vehicle battery 128 Distance remaining to service,
refer to Service requirements 61
Distance warning, refer to Park Distance Control PDC 64
Door key, refer to Integrated key/remote control 18
Door lock 22 Door lock, confirmation
signals 21
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
155
Doors, emergency operation 22
DOT Quality Grades 110 Draft-free ventilation 81, 84 Drinks holders, refer to Cup
holders 89 Drive-off assistance, refer to
DSC 65 Drive-off assistant 66 Driving lamps, refer to Parking
lamps/low beams 74 Driving notes 96 Driving off on hills, refer to
Drive-off assistant 66 Driving stability control
systems 64 Driving through water 98 Driving tips, refer to Driving
notes 96 Dry air, refer to Cooling
function 84 DSC Dynamic Stability
Control 65 DTC Dynamic Traction
Control 65 indicator lamps 65 Dynamic Brake Control
DBC 65 Dynamic Stability Control
DSC 65 Dynamic Traction Control
DTC indicator lamps 66
E EBV Electronic brake-force
distribution 65 Electrical malfunction door lock 22 fuel filler door 104 glass roof 30 Electronic brake-force
distribution EBV 65 Electronic oil level check 115 Electronic Stability Program
ESP, refer to Dynamic Stability Control DSC 65
Emergency operation, refer to Manual operation
door lock 22 fuel filler door 104 glass roof 30 transmission lock, automatic
transmission 51 Emergency release, luggage
compartment lid 24 Emergency Request 130 Emergency services, refer to
Roadside Assistance 130 Energy, saving saving fuel 96 Engine breaking in 96 data 146 speed 146 starting 48 starting, convenient
access 26 switching off 48 Engine compartment 115 Engine coolant, refer to
Coolant 117 Engine oil adding 116 additives 116 BMW Maintenance
System 118 checking level 115 intervals between changes,
refer to Service requirements 61
specified engine oils 116 Engine output, refer to Engine
data 146 Engine speed, refer to Engine
data 146 Engine starting, refer to
Starting the engine 48 ESP Electronic Stability
Program, refer to Dynamic Stability Control DSC 65
Event data recorders 119 Exhaust system, refer to Hot
exhaust system 97
Exterior mirrors 41 adjusting 41 automatic dimming
feature 43 automatic heating 42 folding in and out 42 Eyes for tow-starting and towing
away 132 for tying down loads 100
F Failure messages, refer to
Check Control 62 Failure of an electrical
consumer 128 False alarm, refer to Avoiding
unintentional alarms 25 Fastening safety belts, refer to
Safety belts 41 Filter of automatic climate
control, refer to Microfilter/ activated charcoal filter 84
Filter of heating or air conditioner, refer to Microfilter 81
First aid pouch 130 Fixture for remote control,
refer to Ignition lock 47 Flash when locking/
unlocking 21 Flat tire Run-Flat Tires 112 Tire Pressure Monitor
TPM 68 Flat Tire Monitor FTM 66 indicating a flat tire 67 initializing the system 66 malfunction 67 system limits 66 Flat tires, refer to Tire
condition 111 Fog lamps 77 indicator lamp 77, 134 Footbrake, refer to Braking
safely 98 Footwell lamps 77 For your own safety 5
E ve
ry th
in g
fr o
m A
to Z
156
Front airbags 71 Front seat setting 35 Frost, removing from
windows, refer to Defrosting windows 81, 84
FTM, refer to Flat Tire Monitor 66
Fuel 104 gauge 57 high-quality brands 104 quality 104 specifications 104 tank contents, refer to
Capacities 150 Fuel clock, refer to Fuel
gauge 57 Fuel consumption display,
refer to Average fuel consumption 58
Fuel consumption statistics, refer to Average fuel consumption 58
Fuel display, refer to Fuel gauge 57
Fuel filler door 104 releasing in the event of
electrical malfunction 104 Fuses 128
G Garage door opener, refer to
Integrated universal remote control 85
Gasoline, refer to Required fuel 104
Gasoline display, refer to Fuel gauge 57
Gear change with automatic
transmission 50 with manual transmission 49 Gear display, with automatic
transmission 49 Gearshift lever automatic transmission with
Steptronic 50 manual transmission 49 General driving notes 97
Glass roof, electric 29 closing after electrical
malfunction 30 convenient operation 22 opening, closing 29 operation with convenient
access 26 pinch protection system 29 raising 29 remote control 20 Glove compartment 88 Grills, refer to Air vents 79 Gross vehicle weight, refer to
Weights 149
H Halogen lamps replacing bulbs 125 Handbrake, refer to Parking
brake 49 Hands-free system 14 Hazard warning flashers 14 Head airbags 71 Headlamp control,
automatic 74 Headlamp cover 125 Headlamp flasher 51 Headlamps replacing bulbs 125 Head restraints 37 Heated seats 39 Heated mirrors 42 Heating 79 mirrors 42 seats 39 steering wheel 43 Heating, rear window 81, 84 Heating and ventilation 79 Heating during a stop 83 Heavy loads, refer to Stowing
cargo 99 Height, refer to
Dimensions 147 Height adjustment steering wheel 43
High beams 76 indicator lamp 134 replacing bulbs 125 High-pressure
washer 120, 121 High water, refer to Driving
through water 98 Hills 98 Holders for cups 89 Hood 114 Hot exhaust system 97 Hydraulic brake assist, refer to
Dynamic Brake Control 65 Hydroplaning 97
I Ice warning, refer to Outside
temperature warning 56
Identification marks tire coding 110 Ignition 47 switched off 47 switched on 47 Ignition key, refer to
Integrated key/remote control 18
Ignition key position 1, refer to Radio readiness 47
Ignition key position 2, refer to Ignition on 47
Ignition lock 47 Imprint 2 Indicator and warning
lamps 13, 134 Tire Pressure Monitor
TPM 69 Indicator lighting, refer to
Instrument lighting 77 Individual air distribution 80 Individual settings, refer to
Personal Profile 18 Inflation pressure, tires 106 Inflation pressure monitoring,
refer to Tire Pressure Monitor TPM 68
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
157
Initializing compass, refer to
Calibrating 88 Initializing, Flat Tire Monitor
FTM 66 Instrument cluster 12 Instrument lighting 77 Integrated key 18 Integrated universal remote
control 85 Interior lamps 77 remote control 20 Interior motion sensor 25 Interior rearview mirror 42 automatic dimming
feature 43 compass 87 Interlock 50 Intermittent mode of the
wipers 52
J Jacking points 128 Jumpering, refer to Jump
starting 131 Jump starting 131
K Key, refer to Integrated key/
remote control 18 Keyless go, refer to
Convenient access 26 Keyless opening and closing,
refer to Convenient access 26
Key Memory, refer to Personal Profile 18
Kick-down 50 Knock control 104
L Lamps Adaptive Head Light 76 instrument lighting 77 interior lighting 77
Lamps, refer to Parking lamps/ low beams 74
Lamps and bulbs, replacing bulbs 124
Lashing eyes, refer to Securing cargo 100
LATCH child-restraint fixing system 45
Leather care 122 LED Light-emitting
diodes 124 Length, refer to
Dimensions 147 License plate lamp, replacing
bulb 127 Light-alloy wheels 122 Light-emitting diodes
LED 124 Lighter 90 socket 90 Lighting lamps and bulbs 124 of instruments 77 of vehicle, refer to Lamps 74 Light switch 74 Limit, refer to Speed limit indicator lamp 142 Load 99 Load securing equipment,
refer to Securing cargo 100 Lock buttons of doors, refer to
Locking 23 Locking adjusting confirmation
signal 21 from inside 23 from outside 20 without remote control, refer
to Convenient access 26 Locking and unlocking doors from inside 22 from outside 19 Low-beam headlamps 74 automatic 74 replacing bulbs 125 Lower back support, refer to
Lumbar support 37 Luggage compartment, refer
to Cargo bay
Luggage compartment lid 23 convenient access 27 emergency release 24 opening from outside 23 unlocking with remote
control 20 Luggage rack, refer to Roof-
mounted luggage rack 100 Lumbar support 37
M M+S tires, refer to Winter
tires 113 Maintenance, refer to BMW Maintenance
System 118 Service booklet Maintenance system 118 Malfunction warnings, refer to
Check Control 62 Manual car wash 121 Manual operation door lock 22 fuel filler door 104 glass roof 30 transmission lock, automatic
transmission 51 Manual operation with
automatic transmission 50 Manual transmission 49 Maximum cooling 82 Maximum speed for winter tires 113 Microfilter/activated-charcoal
filter for automatic climate control 84
Microfilter for heating or air conditioner 81
Microphone for telephone 14 Mirror dimming feature 43 Mirrors 41 automatic curb monitor 42 exterior mirrors 41 heating 42 interior rearview mirror 42 Mobile phone, installation
location, refer to Center armrest 88
E ve
ry th
in g
fr o
m A
to Z
158
Mobile phone, refer to the separate Owner's Manual
Modifications, technical, refer to For your own safety 5
Monitoring system for tire pressures, refer to Flat Tire Monitor 66
Multifunctional steering wheel, refer to Buttons on the steering wheel 11
Multifunction switch refer to Turn signals/
headlamp flasher 51 refer to Wiper system 52
N Neck support, refer to Head
restraints 37 Nets, refer to Storage
compartments 89 New tires 112 Number of cylinders, refer to
Engine data 146
O OBD socket, refer to Socket
for On-Board Diagnosis 119 Octane ratings, refer to Fuel
specifications 104 Odometer 56 Oil, refer to Engine oil 115 Oil consumption 115 Oil level 115 Old batteries, refer to
Disposal 128 Onboard tool kit 124 Opening and closing convenient access 26 from inside 22 from outside 19 using the door lock 22 via the remote control 19 Outlets, refer to
Ventilation 81, 84 Output, refer to Engine
data 146
Outside temperature display 56
changing unit of measure 60 on computer 60 Outside temperature
warning 56 Overriding selector lever
lock 51
P Paintwork care 121 Park assistant, refer to Park
Distance Control 64 Park Distance Control PDC 64 Parking vehicle 48 Parking aid, refer to Park
Distance Control PDC 64 Parking brake 49 indicator lamp 49 manual activation 49 Parking lamps/low beams 74 replacing bulbs 125 Parts and accessories, refer to
The individual vehicle 5 Passenger-side mirror tilt
function 42 Pathway lighting 74 Personal Profile 18 Pinch protection system glass roof, electric 29 windows 28 Placing a call, refer to
telephone owner's manual Polish 123 Pollen, refer to Microfilter 81 Pollen, refer to Microfilter/
activated-charcoal filter 84 Power windows 27 Power windows, refer to
Windows 27 Pressure, tires 106 Pressure monitoring of tires,
refer to Flat Tire Monitor 66 Pressure monitoring of tires,
refer to Tire Pressure Monitor TPM 68
Programmable buttons on the steering wheel 11
Protection function, refer to Pinch protection system
glass roof, electric 29 windows 28 Providing medical assistance,
refer to First add pouch 130 Puncture Flat Tire Monitor 66
R Radio position, refer to Radio
readiness 47 Radio readiness 47 switched off 47 switched on 47 Rain sensor 53 Reading lamps 78 Rear lamps, refer to Tail
lamps 126 Rear-mounted luggage
rack 101 Rear seats adjusting head restraints 38 folding down backrests 91 Rearview mirror, refer to
Mirrors 41 Rear window defroster 81, 84 Recirculated-air mode 80, 83 Recirculation of air, refer to
Recirculated-air mode 80, 83
Reflectors, refer to Tail lamps 126
Refueling 104 Releasing hood 114 Remaining distance, refer to
Cruising range 58
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
159
Remote control 18 battery renewal 27 convenient access 26 garage door opener 85 luggage compartment lid 20 malfunctions 21, 27 removing from the ignition
lock 47 service data 118 Remote control key, refer to
Integrated key/remote control 18
Replacement fuses, refer to Fuses 128
Replacement remote control 18
Replacing bulbs, refer to Lamps and bulbs 124
Replacing tires, refer to New wheels and tires 112
Reporting safety defects 6 Reserve warning, refer to Fuel
gauge 57 Reservoir for washer
systems 53 Residual heat 83 Restraint systems, refer to
Safety belts 41 Restraint systems for
children 44 Retreaded tires 112 Reverse gear automatic transmission with
Steptronic 50 manual transmission 49 Roadside Assistance 130 Roadside parking lamps 76 replacing bulbs 125 Roadworthiness test, refer to
Service requirements 61 Rollover protection system,
convertible 72 resetting 73 Roof load capacity 149 Roof-mounted luggage
rack 100 Rope, refer to Tow-starting,
towing away 133
RSC Runflat System Component, refer to Run- Flat Tires 112
Runflat System Component RSC, refer to Run-Flat Tires 112
Run-Flat Tires 112 continuing driving with a
damaged tire 67 flat tire 67 new tires 112 remaining driving distance,
refer to Indication of a flat tire 67
tire inflation pressure 106 winter tires 113 Runflat Tyres, refer to Run-
Flat Tires 112
S Safety-belt height
adjustment 41 Safety belts 41 damage 41 indicator lamp 41 reminder 41 sitting safely 35 Safety systems airbags 71 Antilock Brake System
ABS 64 Dynamic Stability Control
DSC 65 rollover protection system,
convertible 72 safety belts 41 Safety tires, refer to Run-Flat
Tires 112 Saving fuel 96 Screw thread for tow
fitting 132 Seat and mirror memory 39 Seat belt reminder, refer to
'Fasten safety belts' reminder 41
Seats 35 heating 39 sitting safely 35
Securing cargo 92, 93 Selector lever, automatic
transmission with Steptronic 50
Service, refer to Roadside Assistance 130
Service car, refer to Roadside Assistance 130
Service data in remote control 118
Service Interval Display, refer to Condition Based Service CBS 118
Service requirement display, refer to Condition Based Service CBS 118
Service requirements 61 Settings clock, 12h/24h format 60 date format 60 Shifting gears with automatic
transmission with Steptronic 50
Shiftlock, refer to Changing selector lever positions 50
Side airbags 71 Side windows, refer to
Windows 27 Signal horn, refer to Horn 10 Sitting safely 35 airbags 35 safety belt 35 Ski bag 92 Sliding/tilt sunroof, refer to
Glass roof, electric 29 Slot for remote control 47 Smokers' package, refer to
Ashtray 90 Snap-in adapter, refer to
Center armrest 88 Snow chains 113 Socket, refer to Connecting
electrical appliances 90 Socket for On-Board
Diagnosis OBD 119 Spare fuses 128 Special oils, refer to Specified
engine oils 116 Specified engine oils 116
E ve
ry th
in g
fr o
m A
to Z
160
Speed for winter tires 113 Speed display, refer to
Speedometer 12 Speedometer 12 Sport program, automatic
transmission with Steptronic 50
Spray nozzles, refer to Windshield washer nozzles 53
Stability control, refer to Driving stability control systems 64
Start/stop button 47 starting the engine 48 switching off the engine 48 Starting, refer to Starting the
engine 48 Starting assistance, refer to
Jump starting 131 Starting the engine start/stop button 47 Status of this Owner's Manual
at time of printing 5 Steam jet 120, 121 Steering wheel 43 adjustment 43 buttons on steering
wheel 11 heating 43 Steering with variable ratio,
refer to Active steering 70 Steptronic, refer to Automatic
transmission with Steptronic 49
Storage 123 Storage compartment
package 89 Storage compartments 89 Storing seat position, refer to Seat
and mirror memory 39 telephone numbers, refer to
separate Owner's Manual Storing tires 113 Stowage, refer to Storage
compartments 89
Summer tires, refer to Wheels and tires 106
Switches, refer to Cockpit 10 Switching off engine 48 Switching off the engine start/stop button 47 Switching the cooling function
on and off 84 Symbols 4
T Tachometer 56 Tail lamp, refer to Tail
lamps 126 replacing bulb 127 Tail lamps 126 replacing bulb 127 Tank contents, refer to
Capacities 150 Technical changes 5 Technical data 146 Telephone, installation
location, refer to Center armrest 88
Telephone, refer to separate Owner's Manual
Temperature, setting for automatic climate control 81, 82
Temperature display outside temperature 56 outside temperature
warning 56 setting the units 60 Tempomat, refer to Cruise
control 54 Thigh support 36 Third brake lamp, refer to
Center brake lamp 127 Three-point safety belt 41 Through-loading system 91 Tilt alarm sensor 25 Tilt function, passenger-side
mirror 42 Tire inflation pressure 106 loss 67
Tire pressure monitoring, refer to Flat Tire Monitor 66
Tire Pressure Monitor TPM 68
resetting the system 68 system limitations 68 warning lamp 69 Tire puncture, refer to Flat Tire
Monitor 67 Tire Quality Grading 110 Tires age 110, 112 air loss 69 breaking in 96 changing, refer to Changing
wheels 127 condition 111 damage 111 inflation pressure 106 labels 110 minimum tread depth 111 new tires 112 pressure monitoring, refer to
Flat Tire Monitor 66 pressure monitoring, refer to
Tire Pressure Monitor TPM 68
puncture 67 retreaded 112 Run-Flat Tires 112 size 110 wear indicators, refer to
Minimum tread depth 111 winter tires 113 Tools, refer to Onboard tool
kit 124 Torque, refer to Engine
data 146 Tow bar 133 Tow fitting 132 Tow fittings for tow-starting
and towing away 132 Towing 132 car with automatic
transmission 132 methods 133 Towing and tow-starting 132 Tow rope 133 Tow-starting 132
R e
fe re
n ce
A t
a g
la n
ce C
o n
tr o
ls D
ri vi
n g
t ip
s M
o b
il it
y
161
TPM, refer to Tire Pressure Monitor 68
Traction control, refer to Dynamic Stability Control DSC 65
Transmission automatic transmission with
Steptronic 49 manual transmission 49 Transporting children
safely 44 Transport securing devices,
refer to Securing cargo 100 Tread depth, refer to Minimum
tire tread 111 Trip-distance counter, refer to
Trip odometer 56 Triple turn signal activation 52 Trip odometer 56 Trunk, refer to Cargo bay Trunk lid, refer to Luggage
compartment lid 23 Turn, indicating triple turn signal 52 Turning circle, refer to
Dimensions 147 Turn signals 51 indicator lamp 12 replacing bulbs 126 Tying down loads, refer to
Cargo loading 100
U Underbody protection, refer to
Caring for your vehicle Uniform Tire Quality Grading/
UTQR 110 Units of measure average fuel
consumption 60 temperature 60 Universal garage door opener,
refer to Integrated universal remote control 85
Universal remote control 85 Unlatching, refer to
Unlocking 19
Unlocking from inside 23 from outside 19 luggage compartment lid 27 without remote control, refer
to Convenient access 26 Unlocking without a key, refer
to Convenient access 26
V Vehicle battery 128 breaking in 96 cargo loading 99 decommissioning, refer to
Vehicle storage dimensions 147 Identification Number, refer
to Engine compartment 115 parking 48 weight 149 Vehicle jack 128 Vehicle storage 123 Ventilation 81, 84 draft-free 81, 84 Vents, refer to Air vents 79 Vents, refer to
Ventilation 81, 84 Volume fuel tank, refer to
Capacities 150
W Warm steering wheel 43 Warning and indicator
lamps 13, 134 Warning messages, refer to
Check Control 62 Warning triangle 131 Washer fluid 53 content of the reservoir 53 Washer fluid filler neck 53 Waste tray, refer to Ashtray 90 Water on roads, refer to
Driving through water 98 Water penetration 120, 121
Wear indicators in tires, refer to Minimum tread depth 111
Weights 149 Welcome lamps 74 Wheelbase, refer to
Dimensions 147 Wheels, new 112 Wheels and tires 106 Width, refer to
Dimensions 147 Windows 27 convenient operation 20 convenient operation with
convenient access 26 opening, closing 27 pinch protection system 28 Windows, defrosting and
removing condensation 81, 84
Windshield cleaning 53 defrosting and removing
condensation 81, 84 Windshield wash filling capacity, reservoir 150 Windshield washer reservoir,
refer to Washer fluid filler neck 53
Windshield washer system 52 washer fluid 53 washer nozzles 53 Windshield wiper blades,
changing 124 Windshield wipers, refer to
Wiper system 52 Winter tires 113 storage 113 Wiper blade replacement 124 Wiper system 52 Wrench/screwdriver, refer to
Onboard tool kit 124
X Xenon lamps replacing bulb 124
01 41
2 60
0 85
3 u
e B
as is
*BL260085300W*
The Ultim
Related manuals for BMW 128i Convertible 1 Series 2009 Owner's Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the 1 Series BMW works, you can view and download the BMW 128i Convertible 1 Series 2009 Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for BMW 1 Series as well as other BMW manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a BMW 1 Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the BMW 128i Convertible 1 Series 2009 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This BMW 128i Convertible 1 Series 2009 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download BMW 128i Convertible 1 Series 2009 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print BMW 128i Convertible 1 Series 2009 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the BMW 128i Convertible 1 Series 2009 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.